September 2009 - U-Boot

[U-Boot] [PATCH v2] MAKEALL: Add summary information
by Peter Tyser 21 Sep '09

21 Sep '09

This change adds some basic summary information to the MAKEALL script. The summary information includes how many boards were compiled, how many boards had compile warnings or errors, and which specific boards had compile warnings or errors. This information is useful when doing compile testing to quickly determine which boards are broken. As a side benefit, no empty $BOARD.ERR files are generated by MAKEALL. Previously, each board had a corresponding $BOARD.ERR file, even if the board compiled cleanly. Signed-off-by: Peter Tyser <ptyser(a)xes-inc.com> --- Changes since v1: - Fix issue where summary was printed multiple times when a list was composed of sublists MAKEALL | 30 ++++++++++++++++++++++++++++-- 1 files changed, 28 insertions(+), 2 deletions(-) diff --git a/MAKEALL b/MAKEALL index 1d50c34..a63d028 100755 --- a/MAKEALL +++ b/MAKEALL @@ -1,5 +1,8 @@ #!/bin/sh +# Print statistics when ctrl-c is pressed +trap "print_stats; exit " 2 + # Determine number of CPU cores if no default was set : ${BUILD_NCPUS:="`getconf _NPROCESSORS_ONLN`"} @@ -31,6 +34,11 @@ fi LIST="" +# Keep track of the number of builds and errors +ERR_CNT=0 +ERR_LIST="" +TOTAL_CNT=0 + ######################################################################### ## MPC5xx Systems ######################################################################### @@ -898,8 +906,14 @@ build_target() { ${MAKE} distclean >/dev/null ${MAKE} ${target}_config - ${MAKE} ${JOBS} all 2>&1 >${LOG_DIR}/$target.MAKELOG \ - | tee ${LOG_DIR}/$target.ERR + ERR=$(${MAKE} ${JOBS} all 2>&1 > ${LOG_DIR}/$target.MAKELOG) + if [ "${ERR}" ] ; then + echo "$ERR" | tee ${LOG_DIR}/$target.ERR + ERR_CNT=`expr ${ERR_CNT} + 1` + ERR_LIST="${ERR_LIST} $target" + fi + + TOTAL_CNT=`expr ${TOTAL_CNT} + 1` ${CROSS_COMPILE}size ${BUILD_DIR}/u-boot \ | tee -a ${LOG_DIR}/$target.MAKELOG @@ -907,7 +921,17 @@ build_target() { #----------------------------------------------------------------------- +print_stats() { + echo "" + echo "--------------------- SUMMARY ----------------------------" + echo "Boards compiled: ${TOTAL_CNT}" + if [ ${ERR_CNT} -gt 0 ] ; then + echo "Boards with warnings or errors: ${ERR_CNT} (${ERR_LIST} )" + fi + echo "----------------------------------------------------------" +} +#----------------------------------------------------------------------- for arg in $@ do case "$arg" in @@ -932,3 +956,5 @@ do ;; esac done + +print_stats -- 1.6.2.1

2 3

[U-Boot] [PATCH v3] MAKEALL: Add summary information
by Peter Tyser 21 Sep '09

21 Sep '09

This change adds some basic summary information to the MAKEALL script. The summary information includes how many boards were compiled, how many boards had compile warnings or errors, and which specific boards had compile warnings or errors. This information is useful when doing compile testing to quickly determine which boards are broken. As a side benefit, no empty $BOARD.ERR files are generated by MAKEALL. Previously, each board had a corresponding $BOARD.ERR file, even if the board compiled cleanly. Signed-off-by: Peter Tyser <ptyser(a)xes-inc.com> --- Changes since v1: - Fix issue where summary was printed multiple times when a list was composed of sublists Changes since v2: - Update script to only use POSIX arithmetic MAKEALL | 32 +++++++++++++++++++++++++++++--- 1 files changed, 29 insertions(+), 3 deletions(-) diff --git a/MAKEALL b/MAKEALL index 1d50c34..e7bdbc4 100755 --- a/MAKEALL +++ b/MAKEALL @@ -1,11 +1,14 @@ #!/bin/sh +# Print statistics when ctrl-c is pressed +trap "print_stats; exit " 2 + # Determine number of CPU cores if no default was set : ${BUILD_NCPUS:="`getconf _NPROCESSORS_ONLN`"} if [ "$BUILD_NCPUS" -gt 1 ] then - JOBS=-j`expr "$BUILD_NCPUS" + 1` + JOBS="-j $(($BUILD_NCPUS + 1))" else JOBS="" fi @@ -31,6 +34,11 @@ fi LIST="" +# Keep track of the number of builds and errors +ERR_CNT=0 +ERR_LIST="" +TOTAL_CNT=0 + ######################################################################### ## MPC5xx Systems ######################################################################### @@ -898,8 +906,14 @@ build_target() { ${MAKE} distclean >/dev/null ${MAKE} ${target}_config - ${MAKE} ${JOBS} all 2>&1 >${LOG_DIR}/$target.MAKELOG \ - | tee ${LOG_DIR}/$target.ERR + ERR=$(${MAKE} ${JOBS} all 2>&1 > ${LOG_DIR}/$target.MAKELOG) + if [ "${ERR}" ] ; then + echo "$ERR" | tee ${LOG_DIR}/$target.ERR + ERR_CNT=$(($ERR_CNT + 1)) + ERR_LIST="${ERR_LIST} $target" + fi + + TOTAL_CNT=$(($TOTAL_CNT + 1)) ${CROSS_COMPILE}size ${BUILD_DIR}/u-boot \ | tee -a ${LOG_DIR}/$target.MAKELOG @@ -907,7 +921,17 @@ build_target() { #----------------------------------------------------------------------- +print_stats() { + echo "" + echo "--------------------- SUMMARY ----------------------------" + echo "Boards compiled: ${TOTAL_CNT}" + if [ ${ERR_CNT} -gt 0 ] ; then + echo "Boards with warnings or errors: ${ERR_CNT} (${ERR_LIST} )" + fi + echo "----------------------------------------------------------" +} +#----------------------------------------------------------------------- for arg in $@ do case "$arg" in @@ -932,3 +956,5 @@ do ;; esac done + +print_stats -- 1.6.2.1

3 4

[U-Boot] how to use uboot for lm3s811evb+qemu
by Bai Shuwei 21 Sep '09

21 Sep '09

Hello, ALL: I want use u-boot for lm3s811evb which emulated by QEMU system. But I cannot file the related name from include/configs/ directory. I want to know how I can configure the u-boot. # make XXXX_config Hope someone fill the XXXX name or give me idea how to compile u-boot to support lm3s811evb (or LM3S6965EVB ). Thanks ALL! Best Regards! Bai Shuwei -- Love other people, as same as love yourself! Don't think all the time, do it by your hands! Personal URL: http://dslab.lzu.edu.cn:8080/members/baishw/ E-Mail: bai_shuwei(a)weslab.com, baishuwei(a)gmail.com or baishuwei(a)dslab.lzu.edu.cn

1 0

[U-Boot] [PATCH] MAKEALL: Add summary information
by Peter Tyser 21 Sep '09

21 Sep '09

This change adds some basic summary information to the MAKEALL script. The summary information includes how many boards were compiled, how many boards had compile warnings or errors, and which specific boards had compile warnings or errors. This information is useful when doing compile testing to quickly determine which boards are broken. As a side benefit, no empty $BOARD.ERR files are generated by MAKEALL. Previously, each board had a corresponding $BOARD.ERR file, even if the board compiled cleanly. Signed-off-by: Peter Tyser <ptyser(a)xes-inc.com> --- MAKEALL | 30 ++++++++++++++++++++++++++++-- 1 files changed, 28 insertions(+), 2 deletions(-) diff --git a/MAKEALL b/MAKEALL index 1d50c34..d7c90ec 100755 --- a/MAKEALL +++ b/MAKEALL @@ -1,5 +1,8 @@ #!/bin/sh +# Print statistics when ctrl-c is pressed +trap "print_stats; exit " 2 + # Determine number of CPU cores if no default was set : ${BUILD_NCPUS:="`getconf _NPROCESSORS_ONLN`"} @@ -31,6 +34,11 @@ fi LIST="" +# Keep track of the number of builds and errors +ERR_CNT=0 +ERR_LIST="" +TOTAL_CNT=0 + ######################################################################### ## MPC5xx Systems ######################################################################### @@ -898,8 +906,14 @@ build_target() { ${MAKE} distclean >/dev/null ${MAKE} ${target}_config - ${MAKE} ${JOBS} all 2>&1 >${LOG_DIR}/$target.MAKELOG \ - | tee ${LOG_DIR}/$target.ERR + ERR=$(${MAKE} ${JOBS} all 2>&1 > ${LOG_DIR}/$target.MAKELOG) + if [ "${ERR}" ] ; then + echo "$ERR" | tee ${LOG_DIR}/$target.ERR + ERR_CNT=`expr ${ERR_CNT} + 1` + ERR_LIST="${ERR_LIST} $target" + fi + + TOTAL_CNT=`expr ${TOTAL_CNT} + 1` ${CROSS_COMPILE}size ${BUILD_DIR}/u-boot \ | tee -a ${LOG_DIR}/$target.MAKELOG @@ -907,7 +921,17 @@ build_target() { #----------------------------------------------------------------------- +print_stats() { + echo "" + echo "--------------------- SUMMARY ----------------------------" + echo "Boards compiled: ${TOTAL_CNT}" + if [ ${ERR_CNT} -gt 0 ] ; then + echo "Boards with warnings or errors: ${ERR_CNT} (${ERR_LIST} )" + fi + echo "----------------------------------------------------------" +} +#----------------------------------------------------------------------- for arg in $@ do case "$arg" in @@ -931,4 +955,6 @@ do *) build_target ${arg} ;; esac + + print_stats done -- 1.6.2.1

3 2

[U-Boot] [PATCH v3 1/3] ppc/85xx: Clean up p1_p2_rdb PCI setup
by Kumar Gala 20 Sep '09

20 Sep '09

General code cleanup to use in/out IO accessors as well as making the code that prints out info sane between board and generic fsl pci code. Signed-off-by: Kumar Gala <galak(a)kernel.crashing.org> --- * Fixed set_bits32 -> setbits_be32 board/freescale/p1_p2_rdb/pci.c | 42 ++++++++++++++++++++------------------ drivers/pci/fsl_pci_init.c | 2 +- 2 files changed, 23 insertions(+), 21 deletions(-) diff --git a/board/freescale/p1_p2_rdb/pci.c b/board/freescale/p1_p2_rdb/pci.c index a3617d5..4c08f9e 100644 --- a/board/freescale/p1_p2_rdb/pci.c +++ b/board/freescale/p1_p2_rdb/pci.c @@ -41,60 +41,62 @@ static struct pci_controller pcie2_hose; void pci_init_board(void) { - struct fsl_pci_info pci_info[2]; volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - uint devdisr = in_be32(&gur->devdisr); - uint io_sel = (in_be32(&gur->pordevsr) & MPC85xx_PORDEVSR_IO_SEL) >> 19; - uint host_agent = (in_be32(&gur->porbmsr) & MPC85xx_PORBMSR_HA) >> 16; - int num = 0; + struct fsl_pci_info pci_info[2]; + u32 devdisr, pordevsr, io_sel, host_agent; int first_free_busno = 0; + int num = 0; int pcie_ep, pcie_configured; + devdisr = in_be32(&gur->devdisr); + pordevsr = in_be32(&gur->pordevsr); + io_sel = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19; + host_agent = (in_be32(&gur->porbmsr) & MPC85xx_PORBMSR_HA) >> 16; + debug (" pci_init_board: devdisr=%x, io_sel=%x, host_agent=%x\n", devdisr, io_sel, host_agent); - if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII2_DIS)) + if (!(pordevsr & MPC85xx_PORDEVSR_SGMII2_DIS)) printf (" eTSEC2 is in sgmii mode.\n"); + puts("\n"); #ifdef CONFIG_PCIE2 - SET_STD_PCIE_INFO(pci_info[num], 2); pcie_ep = is_fsl_pci_agent(LAW_TRGT_IF_PCIE_2, host_agent); pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_2, io_sel); if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){ - puts ("\n PCIE2 connected to Slot 1 as "); - printf ("%s (base address %lx)", - pcie_ep ? "End Point": "Root Complex", pci_info[num].regs); - first_free_busno = fsl_pci_init_port(&pci_info[num], + SET_STD_PCIE_INFO(pci_info[num], 2); + printf(" PCIE2 connected to Slot 1 as %s (base addr %lx)\n", + pcie_ep ? "End Point" : "Root Complex", + pci_info[num].regs); + first_free_busno = fsl_pci_init_port(&pci_info[num++], &pcie2_hose, first_free_busno); - num++; } else { printf (" PCIE2: disabled\n"); } + puts("\n"); #else - set_bits32(&gur->devdisr, MPC85xx_DEVDISR_PCIE2); /* disable */ + setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE2); /* disable */ #endif #ifdef CONFIG_PCIE1 - SET_STD_PCIE_INFO(pci_info[num], 1); - pcie_ep = is_fsl_pci_agent(LAW_TRGT_IF_PCIE_1, host_agent); pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_1, io_sel); if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){ - puts ("\n PCIE1 connected to Slot 2 as "); - printf ("%s (base address %lx)", + SET_STD_PCIE_INFO(pci_info[num], 1); + printf(" PCIE1 connected to Slot 2 as %s (base addr %lx)\n", pcie_ep ? "End Point" : "Root Complex", pci_info[num].regs); - first_free_busno = fsl_pci_init_port(&pci_info[num], + first_free_busno = fsl_pci_init_port(&pci_info[num++], &pcie1_hose, first_free_busno); - num++; } else { printf (" PCIE1: disabled\n"); } + puts("\n"); #else - set_bits32(&gur->devdisr, MPC85xx_DEVDISR_PCIE); /* disable */ + setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE); /* disable */ #endif } diff --git a/drivers/pci/fsl_pci_init.c b/drivers/pci/fsl_pci_init.c index 885542c..87944bf 100644 --- a/drivers/pci/fsl_pci_init.c +++ b/drivers/pci/fsl_pci_init.c @@ -450,7 +450,7 @@ int fsl_pci_init_port(struct fsl_pci_info *pci_info, fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data); - printf("\n PCIE%x on bus %02x - %02x\n", pci_info->pci_num, + printf(" PCIE%x on bus %02x - %02x\n", pci_info->pci_num, hose->first_busno, hose->last_busno); return(hose->last_busno + 1); -- 1.6.0.6

2 3

[U-Boot] [PATCH][v1] ppc/85xx: 32bit DDR changes for P1020/P1011
by Poonam Aggrwal 19 Sep '09

19 Sep '09

The P1020/P1011 SOCs support max 32bit DDR width as opposed to P2020/P2010 where max DDR data width supported is 64bit. As a next step the DDR data width initialization would be made more dynamic with more flexibility from the board perspective and user choice. Going forward we would also remove the hardcodings for platforms with onboard memories and try to use the FSL SPD code for DDR initialization. Signed-off-by: Poonam Aggrwal <poonam.aggrwal(a)freescale.com> --- based of git://git.am.freescale.net/mirrors/u-boot.git board/freescale/p1_p2_rdb/ddr.c | 29 ++++++++++++++++++++++++----- 1 files changed, 24 insertions(+), 5 deletions(-) diff --git a/board/freescale/p1_p2_rdb/ddr.c b/board/freescale/p1_p2_rdb/ddr.c index d1e659b..5249ae5 100644 --- a/board/freescale/p1_p2_rdb/ddr.c +++ b/board/freescale/p1_p2_rdb/ddr.c @@ -23,10 +23,13 @@ #include <common.h> #include <asm/mmu.h> #include <asm/immap_85xx.h> +#include <asm/processor.h> #include <asm/fsl_ddr_sdram.h> #include <asm/io.h> #include <asm/fsl_law.h> +DECLARE_GLOBAL_DATA_PTR; + extern void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, unsigned int ctrl_num); @@ -203,24 +206,40 @@ phys_size_t fixed_sdram (void) { sys_info_t sysinfo; char buf[32]; + fsl_ddr_cfg_regs_t *ddr_cfg_regs; + size_t ddr_size; + struct cpu_type *cpu; get_sys_info(&sysinfo); printf("Configuring DDR for %s MT/s data rate\n", strmhz(buf, sysinfo.freqDDRBus)); if(sysinfo.freqDDRBus <= DATARATE_400MHZ) - fsl_ddr_set_memctl_regs(&ddr_cfg_regs_400, 0); + ddr_cfg_regs = &ddr_cfg_regs_400; else if(sysinfo.freqDDRBus <= DATARATE_533MHZ) - fsl_ddr_set_memctl_regs(&ddr_cfg_regs_533, 0); + ddr_cfg_regs = &ddr_cfg_regs_533; else if(sysinfo.freqDDRBus <= DATARATE_667MHZ) - fsl_ddr_set_memctl_regs(&ddr_cfg_regs_667, 0); + ddr_cfg_regs = &ddr_cfg_regs_667; else if(sysinfo.freqDDRBus <= DATARATE_800MHZ) - fsl_ddr_set_memctl_regs(&ddr_cfg_regs_800, 0); + ddr_cfg_regs = &ddr_cfg_regs_800; else panic("Unsupported DDR data rate %s MT/s data rate\n", strmhz(buf, sysinfo.freqDDRBus)); - return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; + cpu = gd->cpu; + /* P1020 and it's derivatives support max 32bit DDR width */ + if(cpu->soc_ver == SVR_P1020 || cpu->soc_ver == SVR_P1020_E || + cpu->soc_ver == SVR_P1011 || cpu->soc_ver == SVR_P1011_E) { + ddr_cfg_regs->ddr_sdram_cfg |= SDRAM_CFG_32_BE; + ddr_cfg_regs->cs[0].bnds = 0x0000001F; + ddr_size = (CONFIG_SYS_SDRAM_SIZE * 1024 * 1024 / 2); + } + else + ddr_size = CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; + + fsl_ddr_set_memctl_regs(ddr_cfg_regs, 0); + + return ddr_size; } phys_size_t initdram(int board_type) -- 1.5.6.5

2 1

[U-Boot] [PATCH] MII Bus BitBang Imlementation for MPC85xx FCC ports
by Luigi 'Comio' Mantellini 19 Sep '09

19 Sep '09

This patch add a MII Bus support for FCC port using a simple bitbang implementation (derived from miiphy driver). In order to enable mii bus, you need to define the following additional macros: CONFIG_MPC85XX_BITBANGMII - Enable the mii bus support code CONFIG_SYS_FCC1_MDIO - Pin used for MDIO signal CONFIG_SYS_FCC2_MDIO CONFIG_SYS_FCC3_MDIO CONFIG_SYS_FCC1_MDC - Pin used for MDC signal CONFIG_SYS_FCC2_MDC CONFIG_SYS_FCC3_MDC CONFIG_SYS_FCC1_PHYADDR - Phy address CONFIG_SYS_FCC2_PHYADDR CONFIG_SYS_FCC3_PHYADDR Notice that all Pins are refered to the Parallel IO Ports (A, B, C, D). The pin number is gived by the following formula: AbsIoPin# = (Port#) * 32 + IoPin# where: Port# is 0 for port A, 1 for port B, etc... IoPin# is the pin is a value from 0 to 31 refered to the port AbsIoPin# is the value request bt *_MDIO and *_MDC macros. Any feedback is welcome. best regards, luigi Luigi 'Comio' Mantellini (1): [OLT] Add MII bus implementation for FCC ports (using bitbanging) cpu/mpc85xx/ether_fcc.c | 400 ++++++++++++++++++++++++++++++++++++++++++++--- 1 files changed, 379 insertions(+), 21 deletions(-)

1 1

[U-Boot] [PATCH v4] MAKEALL: Add summary information
by Peter Tyser 19 Sep '09

19 Sep '09

This change adds some basic summary information to the MAKEALL script. The summary information includes how many boards were compiled, how many boards had compile warnings or errors, and which specific boards had compile warnings or errors. This information is useful when doing compile testing to quickly determine which boards are broken. As a side benefit, no empty $BOARD.ERR files are generated by MAKEALL. Previously, each board had a corresponding $BOARD.ERR file, even if the board compiled cleanly. Signed-off-by: Peter Tyser <ptyser(a)xes-inc.com> --- Changes since v1: - Fix issue where summary was printed multiple times when a list was composed of sublists Changes since v2: - Update script to only use POSIX arithmetic Changes since v3: - Remove unnecessary expansion of variables inside of $(( ... )) MAKEALL | 32 +++++++++++++++++++++++++++++--- 1 files changed, 29 insertions(+), 3 deletions(-) diff --git a/MAKEALL b/MAKEALL index 1d50c34..c8e7add 100755 --- a/MAKEALL +++ b/MAKEALL @@ -1,11 +1,14 @@ #!/bin/sh +# Print statistics when ctrl-c is pressed +trap "print_stats; exit " 2 + # Determine number of CPU cores if no default was set : ${BUILD_NCPUS:="`getconf _NPROCESSORS_ONLN`"} if [ "$BUILD_NCPUS" -gt 1 ] then - JOBS=-j`expr "$BUILD_NCPUS" + 1` + JOBS="-j $((BUILD_NCPUS + 1))" else JOBS="" fi @@ -31,6 +34,11 @@ fi LIST="" +# Keep track of the number of builds and errors +ERR_CNT=0 +ERR_LIST="" +TOTAL_CNT=0 + ######################################################################### ## MPC5xx Systems ######################################################################### @@ -898,8 +906,14 @@ build_target() { ${MAKE} distclean >/dev/null ${MAKE} ${target}_config - ${MAKE} ${JOBS} all 2>&1 >${LOG_DIR}/$target.MAKELOG \ - | tee ${LOG_DIR}/$target.ERR + ERR=$(${MAKE} ${JOBS} all 2>&1 > ${LOG_DIR}/$target.MAKELOG) + if [ "${ERR}" ] ; then + echo "$ERR" | tee ${LOG_DIR}/$target.ERR + ERR_CNT=$((ERR_CNT + 1)) + ERR_LIST="${ERR_LIST} $target" + fi + + TOTAL_CNT=$((TOTAL_CNT + 1)) ${CROSS_COMPILE}size ${BUILD_DIR}/u-boot \ | tee -a ${LOG_DIR}/$target.MAKELOG @@ -907,7 +921,17 @@ build_target() { #----------------------------------------------------------------------- +print_stats() { + echo "" + echo "--------------------- SUMMARY ----------------------------" + echo "Boards compiled: ${TOTAL_CNT}" + if [ ${ERR_CNT} -gt 0 ] ; then + echo "Boards with warnings or errors: ${ERR_CNT} (${ERR_LIST} )" + fi + echo "----------------------------------------------------------" +} +#----------------------------------------------------------------------- for arg in $@ do case "$arg" in @@ -932,3 +956,5 @@ do ;; esac done + +print_stats -- 1.6.2.1

1 0

[U-Boot] Fwd: how to use uboot for lm3s811evb+qemu
by Bai Shuwei 19 Sep '09

19 Sep '09

Hello, ALL: I want use u-boot for lm3s811evb which emulated by QEMU system. But I cannot file the related name from include/configs/ directory. I want to know how I can configure the u-boot. # make XXXX_config Hope someone fill the XXXX name or give me idea how to compile u-boot to support lm3s811evb (or LM3S6965EVB ). Thanks ALL! Best Regards! Bai Shuwei -- Love other people, as same as love yourself! Don't think all the time, do it by your hands! Personal URL: http://dslab.lzu.edu.cn:8080/members/baishw/ E-Mail: bai_shuwei(a)weslab.com, baishuwei(a)gmail.com or baishuwei(a)dslab.lzu.edu.cn -- Love other people, as same as love yourself! Don't think all the time, do it by your hands! Personal URL: http://dslab.lzu.edu.cn:8080/members/baishw/ E-Mail: bai_shuwei(a)weslab.com, baishuwei(a)gmail.com or baishuwei(a)dslab.lzu.edu.cn

1 0

[U-Boot] [PATCH] [OneNAND] Board can override OneNAND IPL image
by Kyungmin Park 19 Sep '09

19 Sep '09

Some board use more then 2KiB OneNAND IPL. E.G., S5PC100 loads 16KiB OneNAND IPL diff --git a/Makefile b/Makefile index c9727f8..1af42ce 100644 --- a/Makefile +++ b/Makefile @@ -285,6 +285,7 @@ endif ifeq ($(CONFIG_ONENAND_U_BOOT),y) ONENAND_IPL = onenand_ipl U_BOOT_ONENAND = $(obj)u-boot-onenand.bin +ONENAND_BIN ?= $(obj)onenand_ipl/onenand-ipl-2k.bin endif __OBJS := $(subst $(obj),,$(OBJS)) @@ -374,8 +375,7 @@ $(ONENAND_IPL): $(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk $(MAKE) -C onenand_ipl/board/$(BOARDDIR) all $(U_BOOT_ONENAND): $(ONENAND_IPL) $(obj)u-boot.bin - cat $(obj)onenand_ipl/onenand-ipl-2k.bin $(obj)u-boot.bin > $(obj)u-boot-onenand.bin - cat $(obj)onenand_ipl/onenand-ipl-4k.bin $(obj)u-boot.bin > $(obj)u-boot-flexonenand.bin + cat $(ONENAND_BIN) $(obj)u-boot.bin > $(obj)u-boot-onenand.bin $(VERSION_FILE): @( printf '#define U_BOOT_VERSION "U-Boot %s%s"\n' "$(U_BOOT_VERSION)" \ @@ -3229,8 +3229,6 @@ zylonite_config : ######################################################################### apollon_config : unconfig - @mkdir -p $(obj)include - @mkdir -p $(obj)onenand_ipl/board/apollon @echo "#define CONFIG_ONENAND_U_BOOT" > $(obj)include/config.h @$(MKCONFIG) $(@:_config=) arm arm1136 apollon NULL omap24xx @echo "CONFIG_ONENAND_U_BOOT = y" >> $(obj)include/config.mk @@ -3716,7 +3714,8 @@ clean: $(obj)cpu/blackfin/bootrom-asm-offsets.[chs] @rm -f $(obj)include/bmp_logo.h @rm -f $(obj)nand_spl/{u-boot.lds,u-boot-spl,u-boot-spl.map,System.map} - @rm -f $(obj)onenand_ipl/onenand-{ipl,ipl.bin,ipl-2k.bin,ipl-4k.bin,ipl.map} + @rm -f $(obj)onenand_ipl/onenand-{ipl,ipl.bin,ipl.map} + @rm -f $(ONENAND_BIN) @rm -f $(obj)onenand_ipl/u-boot.lds @rm -f $(TIMESTAMP_FILE) $(VERSION_FILE) @find $(OBJTREE) -type f \

2 2