September 2009 - U-Boot

[U-Boot] TFTP Server in U-Boot / Pushing files to U-Boot
by Joe Hershberger 22 Sep '09

22 Sep '09

Hi All, This is related to the post here: http://www.mail-archive.com/u-boot@lists.denx.de/msg06428.html My use case is similar... updating the kernel remotely to a deployed, physically inaccessible system. I am considering the same thing (TFTP server in U-Boot), but I believe I have a good reason for wanting it. At the same time, I don't want to waste effort if others have a better idea for how to accomplish what I need. The main sticking point for me with using TFTP client from U-Boot is firewalls. My system will be accessed by machines inside a firewall and if I use TFTP client from U-Boot, then I must poke a hole in the firewall... however, I have no control over the firewall so that isn't possible. If the host machine connects to the U-Boot running TFTP server, then all is well. I intend to control U-Boot remotely using netconsole. Is there a better way to push files to U-Boot over netconsole than implementing TFTP server? It seems like this would be a common concern, so it seems likely that it has been solved (in some other way, since there is no TFTP server support in U-Boot). Thanks, -Joe

2 2

[U-Boot] [PATCH] imx51:Add support basic boot code of freescale imx51 bbg board
by gareatech＠gmail.com 21 Sep '09

21 Sep '09

From: Fred Fan <fanyefeng(a)gmail.com> This patch just supports boot into u-boot from mmc or spi-nor flash. It just implements console, iomux and clock. There are no ethernet, nor-flash, mmc or other peripheral drivers. Sign-of-by: Fred.Fan <fanyefeng(a)gmail.com> Sign-of-by: Fred.Fan <r01011(a)freescale.com> --- MAINTAINERS | 4 + MAKEALL | 1 + Makefile | 3 + board/freescale/imx51/Makefile | 49 +++ board/freescale/imx51/board-imx51.h | 64 ++++ board/freescale/imx51/config.mk | 2 + board/freescale/imx51/flash_header.S | 113 ++++++ board/freescale/imx51/imx51.c | 233 ++++++++++++ board/freescale/imx51/lowlevel_init.S | 281 ++++++++++++++ board/freescale/imx51/u-boot.lds | 72 ++++ cpu/arm_cortexa8/mx51/Makefile | 50 +++ cpu/arm_cortexa8/mx51/clock.c | 229 +++++++++++ cpu/arm_cortexa8/mx51/crm_regs.h | 673 +++++++++++++++++++++++++++++++++ cpu/arm_cortexa8/mx51/interrupts.c | 33 ++ cpu/arm_cortexa8/mx51/iomux.c | 199 ++++++++++ cpu/arm_cortexa8/mx51/serial.c | 223 +++++++++++ cpu/arm_cortexa8/mx51/soc.c | 66 ++++ cpu/arm_cortexa8/mx51/timer.c | 112 ++++++ include/asm-arm/arch-mx51/iomux.h | 240 ++++++++++++ include/asm-arm/arch-mx51/mx51.h | 416 ++++++++++++++++++++ include/asm-arm/arch-mx51/mx51_pins.h | 370 ++++++++++++++++++ include/configs/imx51.h | 177 +++++++++ 22 files changed, 3610 insertions(+), 0 deletions(-) create mode 100644 board/freescale/imx51/Makefile create mode 100644 board/freescale/imx51/board-imx51.h create mode 100644 board/freescale/imx51/config.mk create mode 100644 board/freescale/imx51/flash_header.S create mode 100644 board/freescale/imx51/imx51.c create mode 100644 board/freescale/imx51/lowlevel_init.S create mode 100644 board/freescale/imx51/u-boot.lds create mode 100644 cpu/arm_cortexa8/mx51/Makefile create mode 100644 cpu/arm_cortexa8/mx51/clock.c create mode 100644 cpu/arm_cortexa8/mx51/crm_regs.h create mode 100644 cpu/arm_cortexa8/mx51/interrupts.c create mode 100644 cpu/arm_cortexa8/mx51/iomux.c create mode 100644 cpu/arm_cortexa8/mx51/serial.c create mode 100644 cpu/arm_cortexa8/mx51/soc.c create mode 100644 cpu/arm_cortexa8/mx51/timer.c create mode 100644 include/asm-arm/arch-mx51/iomux.h create mode 100644 include/asm-arm/arch-mx51/mx51.h create mode 100644 include/asm-arm/arch-mx51/mx51_pins.h create mode 100644 include/configs/imx51.h diff --git a/MAINTAINERS b/MAINTAINERS index 620604c..5fb1221 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -549,6 +549,10 @@ Fabio Estevam <Fabio.Estevam(a)freescale.com> mx31pdk i.MX31 +Fred Fan <fanyefeng(a)gmail.com> + + imx51 i.MX51 + Peter Figuli <peposh(a)etc.sk> wepep250 xscale diff --git a/MAKEALL b/MAKEALL index edebaea..ed8c437 100755 --- a/MAKEALL +++ b/MAKEALL @@ -581,6 +581,7 @@ LIST_ARM_CORTEX_A8=" \ omap3_pandora \ omap3_zoom1 \ omap3_zoom2 \ + imx51 \ " ######################################################################### diff --git a/Makefile b/Makefile index e4499d7..27a418c 100644 --- a/Makefile +++ b/Makefile @@ -3229,6 +3229,9 @@ mx31pdk_nand_config : unconfig fi @$(MKCONFIG) -a mx31pdk arm arm1136 mx31pdk freescale mx31 +imx51_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 imx51 freescale mx51 + omap2420h4_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4 NULL omap24xx diff --git a/board/freescale/imx51/Makefile b/board/freescale/imx51/Makefile new file mode 100644 index 0000000..fbd40f2 --- /dev/null +++ b/board/freescale/imx51/Makefile @@ -0,0 +1,49 @@ +# +# Copyright (C) 2007, Guennadi Liakhovetski <lg(a)denx.de> +# +# (C) Copyright 2009 Freescale Semiconductor, Inc. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := imx51.o +SOBJS := lowlevel_init.o flash_header.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/freescale/imx51/board-imx51.h b/board/freescale/imx51/board-imx51.h new file mode 100644 index 0000000..7a2cae0 --- /dev/null +++ b/board/freescale/imx51/board-imx51.h @@ -0,0 +1,64 @@ +/* + * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#ifndef __BOARD_FREESCALE_BOARD_IMX51_H__ +#define __BOARD_FREESCALE_BOARD_IMX51_H__ + +/*! + * @defgroup BRDCFG_MX51 Board Configuration Options + * @ingroup MSL_MX51 + */ + +/*! + * @file mx51_3stack/board-imx51.h + * + * @brief This file contains all the board level configuration options. + * + * It currently hold the options defined for MX51 3Stack Platform. + * + * @ingroup BRDCFG_IMX51 + */ + +/* CPLD offsets */ +#define PBC_LED_CTRL (0x20000) +#define PBC_SB_STAT (0x20008) +#define PBC_ID_AAAA (0x20040) +#define PBC_ID_5555 (0x20048) +#define PBC_VERSION (0x20050) +#define PBC_ID_CAFE (0x20058) +#define PBC_INT_STAT (0x20010) +#define PBC_INT_MASK (0x20038) +#define PBC_INT_REST (0x20020) +#define PBC_SW_RESET (0x20060) + +/* LED switchs */ +#define LED_SWITCH_REG 0x00 +/* buttons */ +#define SWITCH_BUTTONS_REG 0x08 +/* status, interrupt */ +#define INTR_STATUS_REG 0x10 +#define INTR_MASK_REG 0x38 +#define INTR_RESET_REG 0x20 +/* magic word for debug CPLD */ +#define MAGIC_NUMBER1_REG 0x40 +#define MAGIC_NUMBER2_REG 0x48 +/* CPLD code version */ +#define CPLD_CODE_VER_REG 0x50 +/* magic word for debug CPLD */ +#define MAGIC_NUMBER3_REG 0x58 +/* module reset register*/ +#define MODULE_RESET_REG 0x60 +/* CPU ID and Personality ID */ +#define MCU_BOARD_ID_REG 0x68 + +#endif /* __BOARD_FREESCALE_BOARD_IMX51_H__ */ diff --git a/board/freescale/imx51/config.mk b/board/freescale/imx51/config.mk new file mode 100644 index 0000000..d8b0f10 --- /dev/null +++ b/board/freescale/imx51/config.mk @@ -0,0 +1,2 @@ +LDSCRIPT = board/$(VENDOR)/$(BOARD)/u-boot.lds +TEXT_BASE = 0x97800000 diff --git a/board/freescale/imx51/flash_header.S b/board/freescale/imx51/flash_header.S new file mode 100644 index 0000000..6790679 --- /dev/null +++ b/board/freescale/imx51/flash_header.S @@ -0,0 +1,113 @@ +/* + * Copyright 2009 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <asm/arch/mx51.h> +#include "board-imx51.h" + +#ifdef CONFIG_FLASH_HEADER +#ifndef CONFIG_FLASH_HEADER_OFFSET +# error "Must define the offset of flash header" +#endif +#define MXC_DCD_ITEM(i, type, addr, val) \ +dcd_node_##i: \ + .word type ; \ + .word addr ; \ + .word val ; \ + +.section ".text.flasheader", "x" + b _start + .org CONFIG_FLASH_HEADER_OFFSET +app_code_jump_v: .word _start +app_code_code_barker: .word CONFIG_FLASH_HEADER_BARKER +app_code_csf: .word 0 +dcd_ptr_ptr: .word dcd_ptr +super_root_key: .word 0 +dcd_ptr: .word dcd_array_start +app_dest_ptr: .word TEXT_BASE +dcd_array_start: +magic: .word 0xB17219E9 +dcd_array_size: .word dcd_data_end - dcd_array_start - 8 +/* DCD */ +/* DDR2 IOMUX configuration */ +MXC_DCD_ITEM(1, 4, IOMUXC_BASE_ADDR + 0x8a0, 0x200) +MXC_DCD_ITEM(2, 4, IOMUXC_BASE_ADDR + 0x50c, 0x20c5) +MXC_DCD_ITEM(3, 4, IOMUXC_BASE_ADDR + 0x510, 0x20c5) +MXC_DCD_ITEM(4, 4, IOMUXC_BASE_ADDR + 0x83c, 0x2) +MXC_DCD_ITEM(5, 4, IOMUXC_BASE_ADDR + 0x848, 0x2) +MXC_DCD_ITEM(6, 4, IOMUXC_BASE_ADDR + 0x4b8, 0xe7) +MXC_DCD_ITEM(7, 4, IOMUXC_BASE_ADDR + 0x4bc, 0x45) +MXC_DCD_ITEM(8, 4, IOMUXC_BASE_ADDR + 0x4c0, 0x45) +MXC_DCD_ITEM(9, 4, IOMUXC_BASE_ADDR + 0x4c4, 0x45) +MXC_DCD_ITEM(10, 4, IOMUXC_BASE_ADDR + 0x4c8, 0x45) +MXC_DCD_ITEM(11, 4, IOMUXC_BASE_ADDR + 0x820, 0x0) +MXC_DCD_ITEM(12, 4, IOMUXC_BASE_ADDR + 0x4a4, 0x3) +MXC_DCD_ITEM(13, 4, IOMUXC_BASE_ADDR + 0x4a8, 0x3) +MXC_DCD_ITEM(14, 4, IOMUXC_BASE_ADDR + 0x4ac, 0xe3) +MXC_DCD_ITEM(15, 4, IOMUXC_BASE_ADDR + 0x4b0, 0xe3) +MXC_DCD_ITEM(16, 4, IOMUXC_BASE_ADDR + 0x4b4, 0xe3) +MXC_DCD_ITEM(17, 4, IOMUXC_BASE_ADDR + 0x4cc, 0xe3) +MXC_DCD_ITEM(18, 4, IOMUXC_BASE_ADDR + 0x4d0, 0xe2) +/* Set drive strength to MAX */ +MXC_DCD_ITEM(19, 4, IOMUXC_BASE_ADDR + 0x82c, 0x6) +MXC_DCD_ITEM(20, 4, IOMUXC_BASE_ADDR + 0x8a4, 0x6) +MXC_DCD_ITEM(21, 4, IOMUXC_BASE_ADDR + 0x8ac, 0x6) +MXC_DCD_ITEM(22, 4, IOMUXC_BASE_ADDR + 0x8b8, 0x6) +/* 13 ROW, 10 COL, 32Bit, SREF=4 Micron Model */ +/* CAS=3, BL=4 */ +MXC_DCD_ITEM(23, 4, ESDCTL_BASE_ADDR + ESDCTL_ESDCTL0, 0x82a20000) +MXC_DCD_ITEM(24, 4, ESDCTL_BASE_ADDR + ESDCTL_ESDCTL1, 0x82a20000) +MXC_DCD_ITEM(25, 4, ESDCTL_BASE_ADDR + ESDCTL_ESDMISC, 0x000ad0d0) +MXC_DCD_ITEM(26, 4, ESDCTL_BASE_ADDR + ESDCTL_ESDCFG0, 0x333574aa) +MXC_DCD_ITEM(27, 4, ESDCTL_BASE_ADDR + ESDCTL_ESDCFG1, 0x333574aa) +/* Init DRAM on CS0 */ +MXC_DCD_ITEM(28, 4, ESDCTL_BASE_ADDR + ESDCTL_ESDSCR, 0x04008008) +MXC_DCD_ITEM(29, 4, ESDCTL_BASE_ADDR + ESDCTL_ESDSCR, 0x0000801a) +MXC_DCD_ITEM(30, 4, ESDCTL_BASE_ADDR + ESDCTL_ESDSCR, 0x0000801b) +MXC_DCD_ITEM(31, 4, ESDCTL_BASE_ADDR + ESDCTL_ESDSCR, 0x00448019) +MXC_DCD_ITEM(32, 4, ESDCTL_BASE_ADDR + ESDCTL_ESDSCR, 0x07328018) +MXC_DCD_ITEM(33, 4, ESDCTL_BASE_ADDR + ESDCTL_ESDSCR, 0x04008008) +MXC_DCD_ITEM(34, 4, ESDCTL_BASE_ADDR + ESDCTL_ESDSCR, 0x00008010) +MXC_DCD_ITEM(35, 4, ESDCTL_BASE_ADDR + ESDCTL_ESDSCR, 0x00008010) +MXC_DCD_ITEM(36, 4, ESDCTL_BASE_ADDR + ESDCTL_ESDSCR, 0x06328018) +MXC_DCD_ITEM(37, 4, ESDCTL_BASE_ADDR + ESDCTL_ESDSCR, 0x03808019) +MXC_DCD_ITEM(38, 4, ESDCTL_BASE_ADDR + ESDCTL_ESDSCR, 0x00408019) +MXC_DCD_ITEM(39, 4, ESDCTL_BASE_ADDR + ESDCTL_ESDSCR, 0x00008000) +/* Init DRAM on CS1 */ +MXC_DCD_ITEM(40, 4, ESDCTL_BASE_ADDR + ESDCTL_ESDSCR, 0x0400800c) +MXC_DCD_ITEM(41, 4, ESDCTL_BASE_ADDR + ESDCTL_ESDSCR, 0x0000801e) +MXC_DCD_ITEM(42, 4, ESDCTL_BASE_ADDR + ESDCTL_ESDSCR, 0x0000801f) +MXC_DCD_ITEM(43, 4, ESDCTL_BASE_ADDR + ESDCTL_ESDSCR, 0x0000801d) +MXC_DCD_ITEM(44, 4, ESDCTL_BASE_ADDR + ESDCTL_ESDSCR, 0x0732801c) +MXC_DCD_ITEM(45, 4, ESDCTL_BASE_ADDR + ESDCTL_ESDSCR, 0x0400800c) +MXC_DCD_ITEM(46, 4, ESDCTL_BASE_ADDR + ESDCTL_ESDSCR, 0x00008014) +MXC_DCD_ITEM(47, 4, ESDCTL_BASE_ADDR + ESDCTL_ESDSCR, 0x00008014) +MXC_DCD_ITEM(48, 4, ESDCTL_BASE_ADDR + ESDCTL_ESDSCR, 0x0632801c) +MXC_DCD_ITEM(49, 4, ESDCTL_BASE_ADDR + ESDCTL_ESDSCR, 0x0380801d) +MXC_DCD_ITEM(50, 4, ESDCTL_BASE_ADDR + ESDCTL_ESDSCR, 0x0040801d) +MXC_DCD_ITEM(51, 4, ESDCTL_BASE_ADDR + ESDCTL_ESDSCR, 0x00008004) +MXC_DCD_ITEM(52, 4, ESDCTL_BASE_ADDR + ESDCTL_ESDCTL0, 0xb2a20000) +MXC_DCD_ITEM(53, 4, ESDCTL_BASE_ADDR + ESDCTL_ESDCTL1, 0xb2a20000) +MXC_DCD_ITEM(54, 4, ESDCTL_BASE_ADDR + ESDCTL_ESDMISC, 0x000ad6d0) +MXC_DCD_ITEM(55, 4, ESDCTL_BASE_ADDR + ESDCTL_ESDCDLYGD, 0x90000000) +MXC_DCD_ITEM(56, 4, ESDCTL_BASE_ADDR + ESDCTL_ESDSCR, 0x00000000) +dcd_data_end: +image_len: .word 0x100000 +//image_len: .word _end - _start +#endif diff --git a/board/freescale/imx51/imx51.c b/board/freescale/imx51/imx51.c new file mode 100644 index 0000000..f152c9a --- /dev/null +++ b/board/freescale/imx51/imx51.c @@ -0,0 +1,233 @@ +/* + * Copyright (C) 2007, Guennadi Liakhovetski <lg(a)denx.de> + * + * (C) Copyright 2009 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/mx51.h> +#include <asm/arch/mx51_pins.h> +#include <asm/arch/iomux.h> +#include <asm/errno.h> +#include <i2c.h> +#include "board-imx51.h" + +DECLARE_GLOBAL_DATA_PTR; + +static u32 system_rev; +u32 mx51_io_base_addr; +volatile u32 *esdhc_base_pointer; + +u32 get_board_rev(void) +{ + return system_rev; +} + +static inline void setup_soc_rev(void) +{ + int reg; + reg = __raw_readl(ROM_SI_REV); + switch (reg) { + case 0x02: + system_rev = 0x51000 | CHIP_REV_1_1; + break; + case 0x10: + if ((__raw_readl(GPIO1_BASE_ADDR + 0x0) & (0x1 << 22)) == 0) { + system_rev = 0x51000 | CHIP_REV_2_5; + } else { + system_rev = 0x51000 | CHIP_REV_2_0; + } + break; + default: + system_rev = 0x51000 | CHIP_REV_1_0; + } +} + +static inline void set_board_rev(int rev) +{ + system_rev |= (rev & 0xF) << 8; +} + +inline int is_soc_rev(int rev) +{ + return (system_rev & 0xFF) - rev; +} + +int dram_init(void) +{ + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; + return 0; +} + +static void setup_uart(void) +{ + unsigned int pad = PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE | + PAD_CTL_PUE_PULL | PAD_CTL_DRV_HIGH; + mxc_request_iomux(MX51_PIN_UART1_RXD, IOMUX_CONFIG_ALT0); + mxc_iomux_set_pad(MX51_PIN_UART1_RXD, pad | PAD_CTL_SRE_FAST); + mxc_request_iomux(MX51_PIN_UART1_TXD, IOMUX_CONFIG_ALT0); + mxc_iomux_set_pad(MX51_PIN_UART1_TXD, pad | PAD_CTL_SRE_FAST); + mxc_request_iomux(MX51_PIN_UART1_RTS, IOMUX_CONFIG_ALT0); + mxc_iomux_set_pad(MX51_PIN_UART1_RTS, pad); + mxc_request_iomux(MX51_PIN_UART1_CTS, IOMUX_CONFIG_ALT0); + mxc_iomux_set_pad(MX51_PIN_UART1_CTS, pad); +} + +void setup_nfc(void) +{ + /* Enable NFC IOMUX */ + mxc_request_iomux(MX51_PIN_NANDF_CS0, IOMUX_CONFIG_ALT0); + mxc_request_iomux(MX51_PIN_NANDF_CS1, IOMUX_CONFIG_ALT0); + mxc_request_iomux(MX51_PIN_NANDF_CS2, IOMUX_CONFIG_ALT0); + mxc_request_iomux(MX51_PIN_NANDF_CS3, IOMUX_CONFIG_ALT0); + mxc_request_iomux(MX51_PIN_NANDF_CS4, IOMUX_CONFIG_ALT0); + mxc_request_iomux(MX51_PIN_NANDF_CS5, IOMUX_CONFIG_ALT0); + mxc_request_iomux(MX51_PIN_NANDF_CS6, IOMUX_CONFIG_ALT0); + mxc_request_iomux(MX51_PIN_NANDF_CS7, IOMUX_CONFIG_ALT0); +} + +static void setup_expio(void) +{ + u32 reg; + /* CS5 setup */ + mxc_request_iomux(MX51_PIN_EIM_CS5, IOMUX_CONFIG_ALT0); + writel(0x00410089, WEIM_BASE_ADDR + 0x78 + CSGCR1); + writel(0x00000002, WEIM_BASE_ADDR + 0x78 + CSGCR2); + /* RWSC=50, RADVA=2, RADVN=6, OEA=0, OEN=0, RCSA=0, RCSN=0 */ + writel(0x32260000, WEIM_BASE_ADDR + 0x78 + CSRCR1); + /* APR = 0 */ + writel(0x00000000, WEIM_BASE_ADDR + 0x78 + CSRCR2); + /* WAL=0, WBED=1, WWSC=50, WADVA=2, WADVN=6, WEA=0, WEN=0, + * WCSA=0, WCSN=0 + */ + writel(0x72080F00, WEIM_BASE_ADDR + 0x78 + CSWCR1); + if ((readw(CS5_BASE_ADDR + PBC_ID_AAAA) == 0xAAAA) && + (readw(CS5_BASE_ADDR + PBC_ID_5555) == 0x5555)) { + if (is_soc_rev(CHIP_REV_2_0) < 0) { + reg = readl(CCM_BASE_ADDR + CLKCTL_CBCDR); + reg = (reg & (~0x70000)) | 0x30000; + writel(reg, CCM_BASE_ADDR + CLKCTL_CBCDR); + /* make sure divider effective */ + while (readl(CCM_BASE_ADDR + CLKCTL_CDHIPR) != 0) + ; + writel(0x0, CCM_BASE_ADDR + CLKCTL_CCDR); + } + mx51_io_base_addr = CS5_BASE_ADDR; + } else { + /* CS1 */ + writel(0x00410089, WEIM_BASE_ADDR + 0x18 + CSGCR1); + writel(0x00000002, WEIM_BASE_ADDR + 0x18 + CSGCR2); + /* RWSC=50, RADVA=2, RADVN=6, OEA=0, OEN=0, RCSA=0, RCSN=0 */ + writel(0x32260000, WEIM_BASE_ADDR + 0x18 + CSRCR1); + /* APR=0 */ + writel(0x00000000, WEIM_BASE_ADDR + 0x18 + CSRCR2); + /* WAL=0, WBED=1, WWSC=50, WADVA=2, WADVN=6, WEA=0, + * WEN=0, WCSA=0, WCSN=0 + */ + writel(0x72080F00, WEIM_BASE_ADDR + 0x18 + CSWCR1); + mx51_io_base_addr = CS1_BASE_ADDR; + } + + /* Reset interrupt status reg */ + writew(0x1F, mx51_io_base_addr + PBC_INT_REST); + writew(0x00, mx51_io_base_addr + PBC_INT_REST); + writew(0xFFFF, mx51_io_base_addr + PBC_INT_MASK); + + /* Reset the XUART and Ethernet controllers */ + reg = readw(mx51_io_base_addr + PBC_SW_RESET); + reg |= 0x9; + writew(reg, mx51_io_base_addr + PBC_SW_RESET); + reg &= ~0x9; + writew(reg, mx51_io_base_addr + PBC_SW_RESET); +} + +#ifdef CONFIG_NET_MULTI + +#if defined(CONFIG_DRIVER_SMC911X) +extern int smc911x_initialize(bd_t *bis); +#endif +int board_eth_init(bd_t *bis) +{ + int rc = -ENODEV; + +#if defined(CONFIG_DRIVER_SMC911X) + rc = smc911x_initialize(bis); +#endif + + return rc; +} +#endif + +int board_init(void) +{ + setup_soc_rev(); + + gd->bd->bi_arch_number = MACH_TYPE_MX51_BABBAGE; /* board id for linux */ + /* address of boot parameters */ + gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; + + setup_uart(); + setup_nfc(); + setup_expio(); + return 0; +} + +#ifdef BOARD_LATE_INIT +int board_late_init(void) +{ + return 0; +} +#endif + +int checkboard(void) +{ + printf("Board: MX51 BABBAGE "); + + if (system_rev & CHIP_REV_2_5) { + printf("2.5 ["); + } else if (system_rev & CHIP_REV_2_0) { + printf("2.0 ["); + } else if (system_rev & CHIP_REV_1_1) { + printf("1.1 ["); + } else { + printf("1.0 ["); + } + + switch (__raw_readl(SRC_BASE_ADDR + 0x8)) { + case 0x0001: + printf("POR"); + break; + case 0x0009: + printf("RST"); + break; + case 0x0010: + case 0x0011: + printf("WDOG"); + break; + default: + printf("unknown"); + } + printf("]\n"); + return 0; +} + diff --git a/board/freescale/imx51/lowlevel_init.S b/board/freescale/imx51/lowlevel_init.S new file mode 100644 index 0000000..e1296f8 --- /dev/null +++ b/board/freescale/imx51/lowlevel_init.S @@ -0,0 +1,281 @@ +/* + * Copyright (C) 2007, Guennadi Liakhovetski <lg(a)denx.de> + * + * (C) Copyright 2009 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <asm/arch/mx51.h> +#include "board-imx51.h" + +/* + * return soc version + * 0x10: TO1 + * 0x20: TO2 + * 0x30: TO3 + */ +.macro check_soc_version ret, tmp +.endm + +/* + * L2CC Cache setup/invalidation/disable + */ +.macro init_l2cc + /* reconfigure L2 cache aux control reg */ + ldr r0, =0x03C000C4 + mcr p15, 1, r0, c9, c0, 2 +.endm /* init_l2cc */ + +/* AIPS setup - Only setup MPROTx registers. + * The PACR default values are good.*/ +.macro init_aips + /* + * Set all MPROTx to be non-bufferable, trusted for R/W, + * not forced to user-mode. + */ + ldr r0, =AIPS1_BASE_ADDR + ldr r1, =0x77777777 + str r1, [r0, #0x0] + str r1, [r0, #0x4] + ldr r0, =AIPS2_BASE_ADDR + str r1, [r0, #0x0] + str r1, [r0, #0x4] + /* + * Clear the on and off peripheral modules Supervisor Protect bit + * for SDMA to access them. Did not change the AIPS control registers + * (offset 0x20) access type + */ +.endm /* init_aips */ + +/* MAX (Multi-Layer AHB Crossbar Switch) setup */ +.macro init_max +.endm /* init_max */ + +/* M4IF setup */ +.macro init_m4if + /* VPU and IPU given higher priority (0x4) + * IPU accesses with ID=0x1 given highest priority (=0xA) + */ + ldr r0, =M4IF_BASE_ADDR + + ldr r1, =0x00000203 + str r1, [r0, #0x40] + + ldr r1, =0x0 + str r1, [r0, #0x44] + + ldr r1, =0x00120125 + str r1, [r0, #0x9C] + + ldr r1, =0x001901A3 + str r1, [r0, #0x48] + +/* + ldr r1, =0x00000a01 + str r1, [r0, #0x48] + ldr r1, =0x00000404 + str r1, [r0, #0x40] +*/ +.endm /* init_m4if */ + +/* To support 133MHz DDR */ +.macro init_drive_strength +.endm /* init_drive_strength */ + +/* CPLD on CS5 setup */ +.macro init_debug_board +.endm /* init_debug_board */ + +.macro setup_pll pll, freq + ldr r2, =\pll + ldr r1, =0x00001232 + str r1, [r2, #PLL_DP_CTL] /* Set DPLL ON (set UPEN bit): BRMO=1 */ + mov r1, #0x2 + str r1, [r2, #PLL_DP_CONFIG] /* Enable auto-restart AREN bit */ + + str r3, [r2, #PLL_DP_OP] + str r3, [r2, #PLL_DP_HFS_OP] + + str r4, [r2, #PLL_DP_MFD] + str r4, [r2, #PLL_DP_HFS_MFD] + + str r5, [r2, #PLL_DP_MFN] + str r5, [r2, #PLL_DP_HFS_MFN] + + ldr r1, =0x00001232 + str r1, [r2, #PLL_DP_CTL] +1: ldr r1, [r2, #PLL_DP_CTL] + ands r1, r1, #0x1 + beq 1b +.endm + +.macro init_clock + ldr r0, =CCM_BASE_ADDR + mov r1, #0x00060000 + str r1, [r0, #CLKCTL_CCDR] + + /* Switch ARM to step clock */ + mov r1, #0x4 + str r1, [r0, #CLKCTL_CCSR] + + mov r3, #DP_OP_800 + mov r4, #DP_MFD_800 + mov r5, #DP_MFN_800 + setup_pll PLL1_BASE_ADDR + mov r3, #DP_OP_665 + mov r4, #DP_MFD_665 + mov r5, #DP_MFN_665 + setup_pll PLL3_BASE_ADDR + + /* Switch peripheral to PLL 3 */ + ldr r1, =0x0000D3C0 + str r1, [r0, #CLKCTL_CBCMR] + ldr r1, =0x033B9145 + str r1, [r0, #CLKCTL_CBCDR] + mov r3, #DP_OP_665 + mov r4, #DP_MFD_665 + mov r5, #DP_MFN_665 + setup_pll PLL2_BASE_ADDR + + /* Switch peripheral to PLL2 */ + ldr r1, =0x013B9145 + str r1, [r0, #CLKCTL_CBCDR] + ldr r1, =0x0000E3C0 + str r1, [r0, #CLKCTL_CBCMR] + + mov r3, #DP_OP_216 + mov r4, #DP_MFD_216 + mov r5, #DP_MFN_216 + setup_pll PLL3_BASE_ADDR + + /* Set the platform clock dividers */ + ldr r2, =ARM_BASE_ADDR + ldr r1, =0x00000725 + str r1, [r2, #0x14] + + /* Switch ARM back to PLL 1 */ + mov r1, #0 + str r1, [r0, #CLKCTL_CCSR] + str r1, [r0, #CLKCTL_CACRR] + + /* Use lp_apm (24MHz) source for perclk */ + mov r2, #0x48 + ldr r2, [r0] + cmp r2, #0x10 + ldrhs r1, =0x000020C2 + ldrlo r1, =0x0000E3C2 + str r1, [r0, #CLKCTL_CBCMR] + /* TO1.x emi = ahb, all perclk dividers are 1 since using 24MHz */ + /* TO2.x ddr from PLL1, all perclk dividers are 1 since using 24MHz */ + ldrhs r1, =0x59239100 + ldrlo r1, =0x013D9100 + strlo r1, [r0, #CLKCTL_CBCDR] + + /* use PLL2 for UART source, get 66.5MHz */ + ldr r1, =0xA5A2A020 + str r1, [r0, #CLKCTL_CSCMR1] + ldr r1, =0x00C30321 + str r1, [r0, #CLKCTL_CSCDR1] + + /* make sure divider effective */ +1: ldr r1, [r0, #CLKCTL_CDHIPR] + cmp r1, #0 + bne 1b + + mov r1, #0x0 + str r1, [r0, #CLKCTL_CCDR] +.endm + +.macro setup_wdog + ldr r0, =WDOG1_BASE_ADDR + mov r1, #0x30 + strh r1, [r0] +.endm + +.section ".text.init", "x" + +.globl lowlevel_init +lowlevel_init: + /* Platform CHIP level init*/ + ldr r0, =GPIO1_BASE_ADDR + ldr r1, [r0, #0x0] + orr r1, r1, #(1 << 23) + str r1, [r0, #0x0] + ldr r1, [r0, #0x4] + orr r1, r1, #(1 << 23) + str r1, [r0, #0x4] + +#ifdef TURN_OFF_IMPRECISE_ABORT + mrs r0, cpsr + bic r0, r0, #0x100 + msr cpsr, r0 +#endif + + mrc 15, 0, r1, c1, c0, 0 + +#ifndef BRANCH_PREDICTION_ENABLE + mrc 15, 0, r0, c1, c0, 1 + bic r0, r0, #7 + mcr 15, 0, r0, c1, c0, 1 +#else + mrc 15, 0, r0, c1, c0, 1 + orr r0, r0, #7 + mcr 15, 0, r0, c1, c0, 1 + orr r1, r1, #(1<<11) +#endif + +#ifdef UNALIGNED_ACCESS_ENABLE + orr r1, r1, #(1<<22) +#endif + +#ifdef LOW_INT_LATENCY_ENABLE + orr r1, r1, #(1<<21) +#endif + mcr 15, 0, r1, c1, c0, 0 + + mov r0, #0 +#ifdef BRANCH_PREDICTION_ENABLE + mcr 15, 0, r0, c15, c2, 4 +#endif + mcr 15, 0, r0, c7, c10, 4 /* Drain the write buffer */ + + init_l2cc + + init_aips + + init_max + + init_m4if + + init_drive_strength + + init_clock + init_debug_board + /*init_sdram*/ + + /* return from mxc_nand_load */ + /* r12 saved upper lr*/ + mov pc, lr + +/* Board level setting value */ +DDR_PERCHARGE_CMD: .word 0x04008008 +DDR_REFRESH_CMD: .word 0x00008010 +DDR_LMR1_W: .word 0x00338018 +DDR_LMR_CMD: .word 0xB2220000 +DDR_TIMING_W: .word 0xB02567A9 +DDR_MISC_W: .word 0x000A0104 diff --git a/board/freescale/imx51/u-boot.lds b/board/freescale/imx51/u-boot.lds new file mode 100644 index 0000000..8cf619f --- /dev/null +++ b/board/freescale/imx51/u-boot.lds @@ -0,0 +1,72 @@ +/* + * January 2004 - Changed to support H4 device + * Copyright (c) 2004 Texas Instruments + * + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, <gj(a)denx.de> + * + * (C) Copyright 2009 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector layout of our flash chips! XXX FIXME XXX */ + board/freescale/imx51/flash_header.o (.text.flasheader) + cpu/arm_cortexa8/start.o + board/freescale/imx51/libimx51.a (.text) + lib_arm/libarm.a (.text) + net/libnet.a (.text) + drivers/mtd/libmtd.a (.text) + drivers/mmc/libmmc.a (.text) + + . = DEFINED(env_offset) ? env_offset : .; + + *(.text) + } + + . = ALIGN(4); + .rodata : { *(.rodata) } + + . = ALIGN(4); + .data : { *(.data) } + + . = ALIGN(4); + .got : { *(.got) } + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = ALIGN(4); + __bss_start = .; + .bss : { *(.bss) } + _end = .; +} diff --git a/cpu/arm_cortexa8/mx51/Makefile b/cpu/arm_cortexa8/mx51/Makefile new file mode 100644 index 0000000..ee241ca --- /dev/null +++ b/cpu/arm_cortexa8/mx51/Makefile @@ -0,0 +1,50 @@ +# +# (C) Copyright 2000-2006 +# Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. +# +# (C) Copyright 2009 Freescale Semiconductor, Inc. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(SOC).a + +COBJS-y = soc.o timer.o serial.o clock.o iomux.o +SOBJS-y = + +COBJS-$(CONFIG_USE_IRQ) += interrupts.o + +SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y)) + +all: $(obj).depend $(LIB) + +$(LIB): $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/cpu/arm_cortexa8/mx51/clock.c b/cpu/arm_cortexa8/mx51/clock.c new file mode 100644 index 0000000..64f2c61 --- /dev/null +++ b/cpu/arm_cortexa8/mx51/clock.c @@ -0,0 +1,229 @@ +/* + * (C) Copyright 2007 + * Sascha Hauer, Pengutronix + * + * (C) Copyright 2009 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/mx51.h> +#include <asm/errno.h> +#include "crm_regs.h" + +enum pll_clocks { +PLL1_CLK = MXC_DPLL1_BASE, +PLL2_CLK = MXC_DPLL2_BASE, +PLL3_CLK = MXC_DPLL3_BASE, +}; + +enum pll_sw_clocks { +PLL1_SW_CLK, +PLL2_SW_CLK, +PLL3_SW_CLK, +}; + +static u32 __decode_pll(enum pll_clocks pll, u32 infreq) +{ + u32 mfi, mfn, mfd, pd; + + mfn = __raw_readl(pll + MXC_PLL_DP_MFN); + mfd = __raw_readl(pll + MXC_PLL_DP_MFD) + 1; + mfi = __raw_readl(pll + MXC_PLL_DP_OP); + pd = (mfi & 0xF) + 1; + mfi = (mfi >> 4) & 0xF; + mfi = (mfi >= 5) ? mfi : 5; + + return ((4 * (infreq / 1000) * (mfi * mfd + mfn)) / (mfd * pd)) * 1000; +} + +u32 __get_mcu_main_clk(void) +{ + u32 reg, freq; + reg = (__raw_readl(MXC_CCM_CACRR) & MXC_CCM_CACRR_ARM_PODF_MASK) >> + MXC_CCM_CACRR_ARM_PODF_OFFSET; + freq = __decode_pll(PLL1_CLK, CONFIG_MX51_HCLK_FREQ); + return freq / (reg + 1); +} + +static u32 __get_periph_clk(void) +{ + u32 reg; + reg = __raw_readl(MXC_CCM_CBCDR); + if (reg & MXC_CCM_CBCDR_PERIPH_CLK_SEL) { + reg = __raw_readl(MXC_CCM_CBCMR); + switch ((reg & MXC_CCM_CBCMR_PERIPH_CLK_SEL_MASK) >> + MXC_CCM_CBCMR_PERIPH_CLK_SEL_OFFSET) { + case 0: + return __decode_pll(PLL1_CLK, CONFIG_MX51_HCLK_FREQ); + case 1: + return __decode_pll(PLL3_CLK, CONFIG_MX51_HCLK_FREQ); + default: + return 0; + } + } + return __decode_pll(PLL2_CLK, CONFIG_MX51_HCLK_FREQ); +} + +static u32 __get_ipg_clk(void) +{ + u32 ahb_podf, ipg_podf; + + ahb_podf = __raw_readl(MXC_CCM_CBCDR); + ipg_podf = (ahb_podf & MXC_CCM_CBCDR_IPG_PODF_MASK) >> + MXC_CCM_CBCDR_IPG_PODF_OFFSET; + ahb_podf = (ahb_podf & MXC_CCM_CBCDR_AHB_PODF_MASK) >> + MXC_CCM_CBCDR_AHB_PODF_OFFSET; + return __get_periph_clk() / ((ahb_podf + 1) * (ipg_podf + 1)); +} + +static u32 __get_ipg_per_clk(void) +{ + u32 pred1, pred2, podf; + if (__raw_readl(MXC_CCM_CBCMR) & MXC_CCM_CBCMR_PERCLK_IPG_CLK_SEL) + return __get_ipg_clk(); + /* Fixme: not handle what about lpm*/ + podf = __raw_readl(MXC_CCM_CBCDR); + pred1 = (podf & MXC_CCM_CBCDR_PERCLK_PRED1_MASK) >> + MXC_CCM_CBCDR_PERCLK_PRED1_OFFSET; + pred2 = (podf & MXC_CCM_CBCDR_PERCLK_PRED2_MASK) >> + MXC_CCM_CBCDR_PERCLK_PRED2_OFFSET; + podf = (podf & MXC_CCM_CBCDR_PERCLK_PODF_MASK) >> + MXC_CCM_CBCDR_PERCLK_PODF_OFFSET; + + return __get_periph_clk() / ((pred1 + 1) * (pred2 + 1) * (podf + 1)); +} + +static u32 __get_uart_clk(void) +{ + unsigned int freq, reg, pred, podf; + reg = __raw_readl(MXC_CCM_CSCMR1); + switch ((reg & MXC_CCM_CSCMR1_UART_CLK_SEL_MASK) >> + MXC_CCM_CSCMR1_UART_CLK_SEL_OFFSET) { + case 0x0: + freq = __decode_pll(PLL1_CLK, CONFIG_MX51_HCLK_FREQ); + break; + case 0x1: + freq = __decode_pll(PLL2_CLK, CONFIG_MX51_HCLK_FREQ); + break; + case 0x2: + freq = __decode_pll(PLL3_CLK, CONFIG_MX51_HCLK_FREQ); + break; + default: + return 66500000; + } + + reg = __raw_readl(MXC_CCM_CSCDR1); + + pred = (reg & MXC_CCM_CSCDR1_UART_CLK_PRED_MASK) >> + MXC_CCM_CSCDR1_UART_CLK_PRED_OFFSET; + + podf = (reg & MXC_CCM_CSCDR1_UART_CLK_PODF_MASK) >> + MXC_CCM_CSCDR1_UART_CLK_PODF_OFFSET; + freq /= (pred + 1) * (podf + 1); + + return freq; +} + +/*! ++ * This function returns the low power audio clock. ++ */ +u32 get_lp_apm(void) +{ + u32 ret_val = 0; + u32 ccsr = __raw_readl(MXC_CCM_CCSR); + + if (((ccsr >> 9) & 1) == 0) + ret_val = CONFIG_MX51_HCLK_FREQ; + else + ret_val = ((32768 * 1024)); + + return ret_val; +} + +static u32 __get_cspi_clk(void) +{ + u32 ret_val = 0, pdf, pre_pdf, clk_sel; + u32 cscmr1 = __raw_readl(MXC_CCM_CSCMR1); + u32 cscdr2 = __raw_readl(MXC_CCM_CSCDR2); + + pre_pdf = (cscdr2 & MXC_CCM_CSCDR2_CSPI_CLK_PRED_MASK) \ + >> MXC_CCM_CSCDR2_CSPI_CLK_PRED_OFFSET; + pdf = (cscdr2 & MXC_CCM_CSCDR2_CSPI_CLK_PODF_MASK) \ + >> MXC_CCM_CSCDR2_CSPI_CLK_PODF_OFFSET; + clk_sel = (cscmr1 & MXC_CCM_CSCMR1_CSPI_CLK_SEL_MASK) \ + >> MXC_CCM_CSCMR1_CSPI_CLK_SEL_OFFSET; + + switch (clk_sel) { + case 0: + ret_val = __decode_pll(PLL1_CLK, CONFIG_MX51_HCLK_FREQ) / ((pre_pdf + 1) * (pdf + 1)); + break; + case 1: + ret_val = __decode_pll(PLL2_CLK, CONFIG_MX51_HCLK_FREQ) / ((pre_pdf + 1) * (pdf + 1)); + break; + case 2: + ret_val = __decode_pll(PLL3_CLK, CONFIG_MX51_HCLK_FREQ) / ((pre_pdf + 1) * (pdf + 1)); + break; + default: + ret_val = get_lp_apm() / ((pre_pdf + 1) * (pdf + 1)); + break; + } + + return ret_val; +} + +unsigned int mxc_get_clock(enum mxc_clock clk) +{ + switch (clk) { + case MXC_ARM_CLK: + return __get_mcu_main_clk(); + case MXC_AHB_CLK: + break; + case MXC_IPG_CLK: + return __get_ipg_clk(); + case MXC_IPG_PERCLK: + return __get_ipg_per_clk(); + case MXC_UART_CLK: + return __get_uart_clk(); + case MXC_CSPI_CLK: + return __get_cspi_clk(); + case MXC_FEC_CLK: + return __decode_pll(PLL1_CLK, CONFIG_MX51_HCLK_FREQ); + default: + break; + } + return -1; +} + +void mxc_show_clocks(void) +{ + u32 freq; + freq = __decode_pll(PLL1_CLK, CONFIG_MX51_HCLK_FREQ); + printf("mx51 pll1: %dMHz\n", freq / 1000000); + freq = __decode_pll(PLL2_CLK, CONFIG_MX51_HCLK_FREQ); + printf("mx51 pll2: %dMHz\n", freq / 1000000); + freq = __decode_pll(PLL3_CLK, CONFIG_MX51_HCLK_FREQ); + printf("mx51 pll3: %dMHz\n", freq / 1000000); + printf("ipg clock : %dHz\n", mxc_get_clock(MXC_IPG_CLK)); + printf("ipg per clock : %dHz\n", mxc_get_clock(MXC_IPG_PERCLK)); + printf("uart clock : %dHz\n", mxc_get_clock(MXC_UART_CLK)); + printf("cspi clock : %dHz\n", mxc_get_clock(MXC_CSPI_CLK)); +} diff --git a/cpu/arm_cortexa8/mx51/crm_regs.h b/cpu/arm_cortexa8/mx51/crm_regs.h new file mode 100644 index 0000000..6436bed --- /dev/null +++ b/cpu/arm_cortexa8/mx51/crm_regs.h @@ -0,0 +1,673 @@ +/* + * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#ifndef __ARCH_ARM_MACH_MX51_CRM_REGS_H__ +#define __ARCH_ARM_MACH_MX51_CRM_REGS_H__ + +#define MXC_CCM_BASE CCM_BASE_ADDR +#define MXC_DPLL1_BASE PLL1_BASE_ADDR +#define MXC_DPLL2_BASE PLL2_BASE_ADDR +#define MXC_DPLL3_BASE PLL3_BASE_ADDR + +/* PLL Register Offsets */ +#define MXC_PLL_DP_CTL 0x00 +#define MXC_PLL_DP_CONFIG 0x04 +#define MXC_PLL_DP_OP 0x08 +#define MXC_PLL_DP_MFD 0x0C +#define MXC_PLL_DP_MFN 0x10 +#define MXC_PLL_DP_MFNMINUS 0x14 +#define MXC_PLL_DP_MFNPLUS 0x18 +#define MXC_PLL_DP_HFS_OP 0x1C +#define MXC_PLL_DP_HFS_MFD 0x20 +#define MXC_PLL_DP_HFS_MFN 0x24 +#define MXC_PLL_DP_MFN_TOGC 0x28 +#define MXC_PLL_DP_DESTAT 0x2c + +/* PLL Register Bit definitions */ +#define MXC_PLL_DP_CTL_MUL_CTRL 0x2000 +#define MXC_PLL_DP_CTL_DPDCK0_2_EN 0x1000 +#define MXC_PLL_DP_CTL_DPDCK0_2_OFFSET 12 +#define MXC_PLL_DP_CTL_ADE 0x800 +#define MXC_PLL_DP_CTL_REF_CLK_DIV 0x400 +#define MXC_PLL_DP_CTL_REF_CLK_SEL_MASK (3 << 8) +#define MXC_PLL_DP_CTL_REF_CLK_SEL_OFFSET 8 +#define MXC_PLL_DP_CTL_HFSM 0x80 +#define MXC_PLL_DP_CTL_PRE 0x40 +#define MXC_PLL_DP_CTL_UPEN 0x20 +#define MXC_PLL_DP_CTL_RST 0x10 +#define MXC_PLL_DP_CTL_RCP 0x8 +#define MXC_PLL_DP_CTL_PLM 0x4 +#define MXC_PLL_DP_CTL_BRM0 0x2 +#define MXC_PLL_DP_CTL_LRF 0x1 + +#define MXC_PLL_DP_CONFIG_BIST 0x8 +#define MXC_PLL_DP_CONFIG_SJC_CE 0x4 +#define MXC_PLL_DP_CONFIG_AREN 0x2 +#define MXC_PLL_DP_CONFIG_LDREQ 0x1 + +#define MXC_PLL_DP_OP_MFI_OFFSET 4 +#define MXC_PLL_DP_OP_MFI_MASK (0xF << 4) +#define MXC_PLL_DP_OP_PDF_OFFSET 0 +#define MXC_PLL_DP_OP_PDF_MASK 0xF + +#define MXC_PLL_DP_MFD_OFFSET 0 +#define MXC_PLL_DP_MFD_MASK 0x07FFFFFF + +#define MXC_PLL_DP_MFN_OFFSET 0x0 +#define MXC_PLL_DP_MFN_MASK 0x07FFFFFF + +#define MXC_PLL_DP_MFN_TOGC_TOG_DIS (1 << 17) +#define MXC_PLL_DP_MFN_TOGC_TOG_EN (1 << 16) +#define MXC_PLL_DP_MFN_TOGC_CNT_OFFSET 0x0 +#define MXC_PLL_DP_MFN_TOGC_CNT_MASK 0xFFFF + +#define MXC_PLL_DP_DESTAT_TOG_SEL (1 << 31) +#define MXC_PLL_DP_DESTAT_MFN 0x07FFFFFF + +/* Register addresses of CCM*/ +#define MXC_CCM_CCR (MXC_CCM_BASE + 0x00) +#define MXC_CCM_CCDR (MXC_CCM_BASE + 0x04) +#define MXC_CCM_CSR (MXC_CCM_BASE + 0x08) +#define MXC_CCM_CCSR (MXC_CCM_BASE + 0x0C) +#define MXC_CCM_CACRR (MXC_CCM_BASE + 0x10) +#define MXC_CCM_CBCDR (MXC_CCM_BASE + 0x14) +#define MXC_CCM_CBCMR (MXC_CCM_BASE + 0x18) +#define MXC_CCM_CSCMR1 (MXC_CCM_BASE + 0x1C) +#define MXC_CCM_CSCMR2 (MXC_CCM_BASE + 0x20) +#define MXC_CCM_CSCDR1 (MXC_CCM_BASE + 0x24) +#define MXC_CCM_CS1CDR (MXC_CCM_BASE + 0x28) +#define MXC_CCM_CS2CDR (MXC_CCM_BASE + 0x2C) +#define MXC_CCM_CDCDR (MXC_CCM_BASE + 0x30) +#define MXC_CCM_CHSCDR (MXC_CCM_BASE + 0x34) +#define MXC_CCM_CSCDR2 (MXC_CCM_BASE + 0x38) +#define MXC_CCM_CSCDR3 (MXC_CCM_BASE + 0x3C) +#define MXC_CCM_CSCDR4 (MXC_CCM_BASE + 0x40) +#define MXC_CCM_CWDR (MXC_CCM_BASE + 0x44) +#define MXC_CCM_CDHIPR (MXC_CCM_BASE + 0x48) +#define MXC_CCM_CDCR (MXC_CCM_BASE + 0x4C) +#define MXC_CCM_CTOR (MXC_CCM_BASE + 0x50) +#define MXC_CCM_CLPCR (MXC_CCM_BASE + 0x54) +#define MXC_CCM_CISR (MXC_CCM_BASE + 0x58) +#define MXC_CCM_CIMR (MXC_CCM_BASE + 0x5C) +#define MXC_CCM_CCOSR (MXC_CCM_BASE + 0x60) +#define MXC_CCM_CGPR (MXC_CCM_BASE + 0x64) +#define MXC_CCM_CCGR0 (MXC_CCM_BASE + 0x68) +#define MXC_CCM_CCGR1 (MXC_CCM_BASE + 0x6C) +#define MXC_CCM_CCGR2 (MXC_CCM_BASE + 0x70) +#define MXC_CCM_CCGR3 (MXC_CCM_BASE + 0x74) +#define MXC_CCM_CCGR4 (MXC_CCM_BASE + 0x78) +#define MXC_CCM_CCGR5 (MXC_CCM_BASE + 0x7C) +#define MXC_CCM_CCGR6 (MXC_CCM_BASE + 0x80) +#define MXC_CCM_CMEOR (MXC_CCM_BASE + 0x84) + +/* Define the bits in register CCR */ +#define MXC_CCM_CCR_COSC_EN (1 << 12) +#define MXC_CCM_CCR_FPM_MULT_MASK (1 << 11) +#define MXC_CCM_CCR_CAMP2_EN (1 << 10) +#define MXC_CCM_CCR_CAMP1_EN (1 << 9) +#define MXC_CCM_CCR_FPM_EN (1 << 8) +#define MXC_CCM_CCR_OSCNT_OFFSET (0) +#define MXC_CCM_CCR_OSCNT_MASK (0xFF) + +/* Define the bits in register CCDR */ +#define MXC_CCM_CCDR_HSC_HS_MASK (0x1 << 18) +#define MXC_CCM_CCDR_IPU_HS_MASK (0x1 << 17) +#define MXC_CCM_CCDR_EMI_HS_MASK (0x1 << 16) + +/* Define the bits in register CSR */ +#define MXC_CCM_CSR_COSR_READY (1 << 5) +#define MXC_CCM_CSR_LVS_VALUE (1 << 4) +#define MXC_CCM_CSR_CAMP2_READY (1 << 3) +#define MXC_CCM_CSR_CAMP1_READY (1 << 2) +#define MXC_CCM_CSR_FPM_READY (1 << 1) +#define MXC_CCM_CSR_REF_EN_B (1 << 0) + +/* Define the bits in register CCSR */ +#define MXC_CCM_CCSR_LP_APM_SEL (0x1 << 9) +#define MXC_CCM_CCSR_STEP_SEL_OFFSET (7) +#define MXC_CCM_CCSR_STEP_SEL_MASK (0x3 << 7) +#define MXC_CCM_CCSR_PLL2_PODF_OFFSET (5) +#define MXC_CCM_CCSR_PLL2_PODF_MASK (0x3 << 5) +#define MXC_CCM_CCSR_PLL3_PODF_OFFSET (3) +#define MXC_CCM_CCSR_PLL3_PODF_MASK (0x3 << 3) +#define MXC_CCM_CCSR_PLL1_SW_CLK_SEL (1 << 2) +#define MXC_CCM_CCSR_PLL2_SW_CLK_SEL (1 << 1) +#define MXC_CCM_CCSR_PLL3_SW_CLK_SEL (1 << 0) + +/* Define the bits in register CACRR */ +#define MXC_CCM_CACRR_ARM_PODF_OFFSET (0) +#define MXC_CCM_CACRR_ARM_PODF_MASK (0x7) + +/* Define the bits in register CBCDR */ +#define MXC_CCM_CBCDR_EMI_CLK_SEL (0x1 << 26) +#define MXC_CCM_CBCDR_PERIPH_CLK_SEL (0x1 << 25) +#define MXC_CCM_CBCDR_EMI_PODF_OFFSET (22) +#define MXC_CCM_CBCDR_EMI_PODF_MASK (0x7 << 22) +#define MXC_CCM_CBCDR_AXI_B_PODF_OFFSET (19) +#define MXC_CCM_CBCDR_AXI_B_PODF_MASK (0x7 << 19) +#define MXC_CCM_CBCDR_AXI_A_PODF_OFFSET (16) +#define MXC_CCM_CBCDR_AXI_A_PODF_MASK (0x7 << 16) +#define MXC_CCM_CBCDR_NFC_PODF_OFFSET (13) +#define MXC_CCM_CBCDR_NFC_PODF_MASK (0x7 << 13) +#define MXC_CCM_CBCDR_AHB_PODF_OFFSET (10) +#define MXC_CCM_CBCDR_AHB_PODF_MASK (0x7 << 10) +#define MXC_CCM_CBCDR_IPG_PODF_OFFSET (8) +#define MXC_CCM_CBCDR_IPG_PODF_MASK (0x3 << 8) +#define MXC_CCM_CBCDR_PERCLK_PRED1_OFFSET (6) +#define MXC_CCM_CBCDR_PERCLK_PRED1_MASK (0x3 << 6) +#define MXC_CCM_CBCDR_PERCLK_PRED2_OFFSET (3) +#define MXC_CCM_CBCDR_PERCLK_PRED2_MASK (0x7 << 3) +#define MXC_CCM_CBCDR_PERCLK_PODF_OFFSET (0) +#define MXC_CCM_CBCDR_PERCLK_PODF_MASK (0x7) + +/* Define the bits in register CBCMR */ +#define MXC_CCM_CBCMR_VPU_AXI_CLK_SEL_OFFSET (14) +#define MXC_CCM_CBCMR_VPU_AXI_CLK_SEL_MASK (0x3 << 14) +#define MXC_CCM_CBCMR_PERIPH_CLK_SEL_OFFSET (12) +#define MXC_CCM_CBCMR_PERIPH_CLK_SEL_MASK (0x3 << 12) +#define MXC_CCM_CBCMR_DDR_CLK_SEL_OFFSET (10) +#define MXC_CCM_CBCMR_DDR_CLK_SEL_MASK (0x3 << 10) +#define MXC_CCM_CBCMR_ARM_AXI_CLK_SEL_OFFSET (8) +#define MXC_CCM_CBCMR_ARM_AXI_CLK_SEL_MASK (0x3 << 8) +#define MXC_CCM_CBCMR_IPU_HSP_CLK_SEL_OFFSET (6) +#define MXC_CCM_CBCMR_IPU_HSP_CLK_SEL_MASK (0x3 << 6) +#define MXC_CCM_CBCMR_GPU_CLK_SEL_OFFSET (4) +#define MXC_CCM_CBCMR_GPU_CLK_SEL_MASK (0x3 << 4) +#define MXC_CCM_CBCMR_PERCLK_LP_APM_CLK_SEL (0x1 << 1) +#define MXC_CCM_CBCMR_PERCLK_IPG_CLK_SEL (0x1 << 0) + +/* Define the bits in register CSCMR1 */ +#define MXC_CCM_CSCMR1_SSI_EXT2_CLK_SEL_OFFSET (30) +#define MXC_CCM_CSCMR1_SSI_EXT2_CLK_SEL_MASK (0x3 << 30) +#define MXC_CCM_CSCMR1_SSI_EXT1_CLK_SEL_OFFSET (28) +#define MXC_CCM_CSCMR1_SSI_EXT1_CLK_SEL_MASK (0x3 << 28) +#define MXC_CCM_CSCMR1_USB_PHY_CLK_SEL_OFFSET (26) +#define MXC_CCM_CSCMR1_USB_PHY_CLK_SEL (0x1 << 26) +#define MXC_CCM_CSCMR1_UART_CLK_SEL_OFFSET (24) +#define MXC_CCM_CSCMR1_UART_CLK_SEL_MASK (0x3 << 24) +#define MXC_CCM_CSCMR1_USBOH3_CLK_SEL_OFFSET (22) +#define MXC_CCM_CSCMR1_USBOH3_CLK_SEL_MASK (0x3 << 22) +#define MXC_CCM_CSCMR1_ESDHC1_MSHC1_CLK_SEL_OFFSET (20) +#define MXC_CCM_CSCMR1_ESDHC1_MSHC1_CLK_SEL_MASK (0x3 << 20) +#define MXC_CCM_CSCMR1_ESDHC3_CLK_SEL (0x1 << 19) +#define MXC_CCM_CSCMR1_ESDHC4_CLK_SEL (0x1 << 18) +#define MXC_CCM_CSCMR1_ESDHC2_MSHC2_CLK_SEL_OFFSET (16) +#define MXC_CCM_CSCMR1_ESDHC2_MSHC2_CLK_SEL_MASK (0x3 << 16) +#define MXC_CCM_CSCMR1_SSI1_CLK_SEL_OFFSET (14) +#define MXC_CCM_CSCMR1_SSI1_CLK_SEL_MASK (0x3 << 14) +#define MXC_CCM_CSCMR1_SSI2_CLK_SEL_OFFSET (12) +#define MXC_CCM_CSCMR1_SSI2_CLK_SEL_MASK (0x3 << 12) +#define MXC_CCM_CSCMR1_SSI3_CLK_SEL (0x1 << 11) +#define MXC_CCM_CSCMR1_VPU_RCLK_SEL (0x1 << 10) +#define MXC_CCM_CSCMR1_SSI_APM_CLK_SEL_OFFSET (8) +#define MXC_CCM_CSCMR1_SSI_APM_CLK_SEL_MASK (0x3 << 8) +#define MXC_CCM_CSCMR1_TVE_CLK_SEL (0x1 << 7) +#define MXC_CCM_CSCMR1_TVE_EXT_CLK_SEL (0x1 << 6) +#define MXC_CCM_CSCMR1_CSPI_CLK_SEL_OFFSET (4) +#define MXC_CCM_CSCMR1_CSPI_CLK_SEL_MASK (0x3 << 4) +#define MXC_CCM_CSCMR1_SPDIF_CLK_SEL_OFFSET (2) +#define MXC_CCM_CSCMR1_SPDIF_CLK_SEL_MASK (0x3 << 2) +#define MXC_CCM_CSCMR1_SSI_EXT2_COM_CLK_SEL (0x1 << 1) +#define MXC_CCM_CSCMR1_SSI_EXT1_COM_CLK_SEL (0x1) + +/* Define the bits in register CSCMR2 */ +#define MXC_CCM_CSCMR2_DI_CLK_SEL_OFFSET (26) +#define MXC_CCM_CSCMR2_DI_CLK_SEL_MASK (0x7 << 26) +#define MXC_CCM_CSCMR2_CSI_MCLK2_CLK_SEL_OFFSET (24) +#define MXC_CCM_CSCMR2_CSI_MCLK2_CLK_SEL_MASK (0x3 << 24) +#define MXC_CCM_CSCMR2_CSI_MCLK1_CLK_SEL_OFFSET (22) +#define MXC_CCM_CSCMR2_CSI_MCLK1_CLK_SEL_MASK (0x3 << 22) +#define MXC_CCM_CSCMR2_ESC_CLK_SEL_OFFSET (20) +#define MXC_CCM_CSCMR2_ESC_CLK_SEL_MASK (0x3 << 20) +#define MXC_CCM_CSCMR2_HSC2_CLK_SEL_OFFSET (18) +#define MXC_CCM_CSCMR2_HSC2_CLK_SEL_MASK (0x3 << 18) +#define MXC_CCM_CSCMR2_HSC1_CLK_SEL_OFFSET (16) +#define MXC_CCM_CSCMR2_HSC1_CLK_SEL_MASK (0x3 << 16) +#define MXC_CCM_CSCMR2_HSI2C_CLK_SEL_OFFSET (14) +#define MXC_CCM_CSCMR2_HSI2C_CLK_SEL_MASK (0x3 << 14) +#define MXC_CCM_CSCMR2_FIRI_CLK_SEL_OFFSET (12) +#define MXC_CCM_CSCMR2_FIRI_CLK_SEL_MASK (0x3 << 12) +#define MXC_CCM_CSCMR2_SIM_CLK_SEL_OFFSET (10) +#define MXC_CCM_CSCMR2_SIM_CLK_SEL_MASK (0x3 << 10) +#define MXC_CCM_CSCMR2_SLIMBUS_COM (0x1 << 9) +#define MXC_CCM_CSCMR2_SLIMBUS_CLK_SEL_OFFSET (6) +#define MXC_CCM_CSCMR2_SLIMBUS_CLK_SEL_MASK (0x7 << 6) +#define MXC_CCM_CSCMR2_SPDIF1_COM (1 << 5) +#define MXC_CCM_CSCMR2_SPDIF0_COM (1 << 4) +#define MXC_CCM_CSCMR2_SPDIF1_CLK_SEL_OFFSET (2) +#define MXC_CCM_CSCMR2_SPDIF1_CLK_SEL_MASK (0x3 << 2) +#define MXC_CCM_CSCMR2_SPDIF0_CLK_SEL_OFFSET (0) +#define MXC_CCM_CSCMR2_SPDIF0_CLK_SEL_MASK (0x3) + +/* Define the bits in register CSCDR1 */ +#define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PRED_OFFSET (22) +#define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PRED_MASK (0x7 << 22) +#define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PODF_OFFSET (19) +#define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PODF_MASK (0x7 << 19) +#define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PRED_OFFSET (16) +#define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PRED_MASK (0x7 << 16) +#define MXC_CCM_CSCDR1_PGC_CLK_PODF_OFFSET (14) +#define MXC_CCM_CSCDR1_PGC_CLK_PODF_MASK (0x3 << 14) +#define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PODF_OFFSET (11) +#define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PODF_MASK (0x7 << 11) +#define MXC_CCM_CSCDR1_USBOH3_CLK_PRED_OFFSET (8) +#define MXC_CCM_CSCDR1_USBOH3_CLK_PRED_MASK (0x7 << 8) +#define MXC_CCM_CSCDR1_USBOH3_CLK_PODF_OFFSET (6) +#define MXC_CCM_CSCDR1_USBOH3_CLK_PODF_MASK (0x3 << 6) +#define MXC_CCM_CSCDR1_UART_CLK_PRED_OFFSET (3) +#define MXC_CCM_CSCDR1_UART_CLK_PRED_MASK (0x7 << 3) +#define MXC_CCM_CSCDR1_UART_CLK_PODF_OFFSET (0) +#define MXC_CCM_CSCDR1_UART_CLK_PODF_MASK (0x7) + +/* Define the bits in register CS1CDR and CS2CDR */ +#define MXC_CCM_CS1CDR_SSI_EXT1_CLK_PRED_OFFSET (22) +#define MXC_CCM_CS1CDR_SSI_EXT1_CLK_PRED_MASK (0x7 << 22) +#define MXC_CCM_CS1CDR_SSI_EXT1_CLK_PODF_OFFSET (16) +#define MXC_CCM_CS1CDR_SSI_EXT1_CLK_PODF_MASK (0x3F << 16) +#define MXC_CCM_CS1CDR_SSI1_CLK_PRED_OFFSET (6) +#define MXC_CCM_CS1CDR_SSI1_CLK_PRED_MASK (0x7 << 6) +#define MXC_CCM_CS1CDR_SSI1_CLK_PODF_OFFSET (0) +#define MXC_CCM_CS1CDR_SSI1_CLK_PODF_MASK (0x3F) + +#define MXC_CCM_CS2CDR_SSI_EXT2_CLK_PRED_OFFSET (22) +#define MXC_CCM_CS2CDR_SSI_EXT2_CLK_PRED_MASK (0x7 << 22) +#define MXC_CCM_CS2CDR_SSI_EXT2_CLK_PODF_OFFSET (16) +#define MXC_CCM_CS2CDR_SSI_EXT2_CLK_PODF_MASK (0x3F << 16) +#define MXC_CCM_CS2CDR_SSI2_CLK_PRED_OFFSET (6) +#define MXC_CCM_CS2CDR_SSI2_CLK_PRED_MASK (0x7 << 6) +#define MXC_CCM_CS2CDR_SSI2_CLK_PODF_OFFSET (0) +#define MXC_CCM_CS2CDR_SSI2_CLK_PODF_MASK (0x3F) + +/* Define the bits in register CDCDR */ +#define MXC_CCM_CDCDR_TVE_CLK_PRED_OFFSET (28) +#define MXC_CCM_CDCDR_TVE_CLK_PRED_MASK (0x7 << 28) +#define MXC_CCM_CDCDR_SPDIF0_CLK_PRED_OFFSET (25) +#define MXC_CCM_CDCDR_SPDIF0_CLK_PRED_MASK (0x7 << 25) +#define MXC_CCM_CDCDR_SPDIF0_CLK_PODF_OFFSET (19) +#define MXC_CCM_CDCDR_SPDIF0_CLK_PODF_MASK (0x3F << 19) +#define MXC_CCM_CDCDR_SPDIF1_CLK_PRED_OFFSET (16) +#define MXC_CCM_CDCDR_SPDIF1_CLK_PRED_MASK (0x7 << 16) +#define MXC_CCM_CDCDR_SPDIF1_CLK_PODF_OFFSET (9) +#define MXC_CCM_CDCDR_SPDIF1_CLK_PODF_MASK (0x3F << 9) +#define MXC_CCM_CDCDR_DI_CLK_PRED_OFFSET (6) +#define MXC_CCM_CDCDR_DI_CLK_PRED_MASK (0x7 << 6) +#define MXC_CCM_CDCDR_USB_PHY_PRED_OFFSET (3) +#define MXC_CCM_CDCDR_USB_PHY_PRED_MASK (0x7 << 3) +#define MXC_CCM_CDCDR_USB_PHY_PODF_OFFSET (0) +#define MXC_CCM_CDCDR_USB_PHY_PODF_MASK (0x7) + +/* Define the bits in register CHSCCDR */ +#define MXC_CCM_CHSCCDR_ESC_CLK_PRED_OFFSET (12) +#define MXC_CCM_CHSCCDR_ESC_CLK_PRED_MASK (0x7 << 12) +#define MXC_CCM_CHSCCDR_ESC_CLK_PODF_OFFSET (6) +#define MXC_CCM_CHSCCDR_ESC_CLK_PODF_MASK (0x3F << 6) +#define MXC_CCM_CHSCCDR_HSC2_CLK_PODF_OFFSET (3) +#define MXC_CCM_CHSCCDR_HSC2_CLK_PODF_MASK (0x7 << 3) +#define MXC_CCM_CHSCCDR_HSC1_CLK_PODF_OFFSET (0) +#define MXC_CCM_CHSCCDR_HSC1_CLK_PODF_MASK (0x7) + +/* Define the bits in register CSCDR2 */ +#define MXC_CCM_CSCDR2_CSPI_CLK_PRED_OFFSET (25) +#define MXC_CCM_CSCDR2_CSPI_CLK_PRED_MASK (0x7 << 25) +#define MXC_CCM_CSCDR2_CSPI_CLK_PODF_OFFSET (19) +#define MXC_CCM_CSCDR2_CSPI_CLK_PODF_MASK (0x3F << 19) +#define MXC_CCM_CSCDR2_SIM_CLK_PRED_OFFSET (16) +#define MXC_CCM_CSCDR2_SIM_CLK_PRED_MASK (0x7 << 16) +#define MXC_CCM_CSCDR2_SIM_CLK_PODF_OFFSET (9) +#define MXC_CCM_CSCDR2_SIM_CLK_PODF_MASK (0x3F << 9) +#define MXC_CCM_CSCDR2_SLIMBUS_CLK_PRED_OFFSET (6) +#define MXC_CCM_CSCDR2_SLIMBUS_PRED_MASK (0x7 << 6) +#define MXC_CCM_CSCDR2_SLIMBUS_PODF_OFFSET (0) +#define MXC_CCM_CSCDR2_SLIMBUS_PODF_MASK (0x3F) + +/* Define the bits in register CSCDR3 */ +#define MXC_CCM_CSCDR3_HSI2C_CLK_PRED_OFFSET (16) +#define MXC_CCM_CSCDR3_HSI2C_CLK_PRED_MASK (0x7 << 16) +#define MXC_CCM_CSCDR3_HSI2C_CLK_PODF_OFFSET (9) +#define MXC_CCM_CSCDR3_HSI2C_CLK_PODF_MASK (0x3F << 9) +#define MXC_CCM_CSCDR3_FIRI_CLK_PRED_OFFSET (6) +#define MXC_CCM_CSCDR3_FIRI_CLK_PRED_MASK (0x7 << 6) +#define MXC_CCM_CSCDR3_FIRI_CLK_PODF_OFFSET (0) +#define MXC_CCM_CSCDR3_FIRI_CLK_PODF_MASK (0x3F) + +/* Define the bits in register CSCDR4 */ +#define MXC_CCM_CSCDR4_CSI_MCLK2_CLK_PRED_OFFSET (16) +#define MXC_CCM_CSCDR4_CSI_MCLK2_CLK_PRED_MASK (0x7 << 16) +#define MXC_CCM_CSCDR4_CSI_MCLK2_CLK_PODF_OFFSET (9) +#define MXC_CCM_CSCDR4_CSI_MCLK2_CLK_PODF_MASK (0x3F << 9) +#define MXC_CCM_CSCDR4_CSI_MCLK1_CLK_PRED_OFFSET (6) +#define MXC_CCM_CSCDR4_CSI_MCLK1_CLK_PRED_MASK (0x7 << 6) +#define MXC_CCM_CSCDR4_CSI_MCLK1_CLK_PODF_OFFSET (0) +#define MXC_CCM_CSCDR4_CSI_MCLK1_CLK_PODF_MASK (0x3F) + +/* Define the bits in register CDHIPR */ +#define MXC_CCM_CDHIPR_ARM_PODF_BUSY (1 << 16) +#define MXC_CCM_CDHIPR_EMI_CLK_SEL_BUSY (1 << 6) +#define MXC_CCM_CDHIPR_PERIPH_CLK_SEL_BUSY (1 << 5) +#define MXC_CCM_CDHIPR_NFC_IPG_INT_MEM_PODF_BUSY (1 << 4) +#define MXC_CCM_CDHIPR_AHB_PODF_BUSY (1 << 3) +#define MXC_CCM_CDHIPR_EMI_PODF_BUSY (1 << 2) +#define MXC_CCM_CDHIPR_AXI_B_PODF_BUSY (1 << 1) +#define MXC_CCM_CDHIPR_AXI_A_PODF_BUSY (1 << 0) + +/* Define the bits in register CDCR */ +#define MXC_CCM_CDCR_ARM_FREQ_SHIFT_DIVIDER (0x1 << 2) +#define MXC_CCM_CDCR_PERIPH_CLK_DVFS_PODF_OFFSET (0) +#define MXC_CCM_CDCR_PERIPH_CLK_DVFS_PODF_MASK (0x3) + +/* Define the bits in register CLPCR */ +#define MXC_CCM_CLPCR_BYPASS_HSC_LPM_HS (0x1 << 23) +#define MXC_CCM_CLPCR_BYPASS_SCC_LPM_HS (0x1 << 22) +#define MXC_CCM_CLPCR_BYPASS_MAX_LPM_HS (0x1 << 21) +#define MXC_CCM_CLPCR_BYPASS_SDMA_LPM_HS (0x1 << 20) +#define MXC_CCM_CLPCR_BYPASS_EMI_LPM_HS (0x1 << 19) +#define MXC_CCM_CLPCR_BYPASS_IPU_LPM_HS (0x1 << 18) +#define MXC_CCM_CLPCR_BYPASS_RTIC_LPM_HS (0x1 << 17) +#define MXC_CCM_CLPCR_BYPASS_RNGC_LPM_HS (0x1 << 16) +#define MXC_CCM_CLPCR_COSC_PWRDOWN (0x1 << 11) +#define MXC_CCM_CLPCR_STBY_COUNT_OFFSET (9) +#define MXC_CCM_CLPCR_STBY_COUNT_MASK (0x3 << 9) +#define MXC_CCM_CLPCR_VSTBY (0x1 << 8) +#define MXC_CCM_CLPCR_DIS_REF_OSC (0x1 << 7) +#define MXC_CCM_CLPCR_SBYOS (0x1 << 6) +#define MXC_CCM_CLPCR_ARM_CLK_DIS_ON_LPM (0x1 << 5) +#define MXC_CCM_CLPCR_LPSR_CLK_SEL_OFFSET (3) +#define MXC_CCM_CLPCR_LPSR_CLK_SEL_MASK (0x3 << 3) +#define MXC_CCM_CLPCR_LPM_OFFSET (0) +#define MXC_CCM_CLPCR_LPM_MASK (0x3) + +/* Define the bits in register CISR */ +#define MXC_CCM_CISR_ARM_PODF_LOADED (0x1 << 25) +#define MXC_CCM_CISR_NFC_IPG_INT_MEM_PODF_LOADED (0x1 << 21) +#define MXC_CCM_CISR_AHB_PODF_LOADED (0x1 << 20) +#define MXC_CCM_CISR_EMI_PODF_LOADED (0x1 << 19) +#define MXC_CCM_CISR_AXI_B_PODF_LOADED (0x1 << 18) +#define MXC_CCM_CISR_AXI_A_PODF_LOADED (0x1 << 17) +#define MXC_CCM_CISR_DIVIDER_LOADED (0x1 << 16) +#define MXC_CCM_CISR_COSC_READY (0x1 << 6) +#define MXC_CCM_CISR_CKIH2_READY (0x1 << 5) +#define MXC_CCM_CISR_CKIH_READY (0x1 << 4) +#define MXC_CCM_CISR_FPM_READY (0x1 << 3) +#define MXC_CCM_CISR_LRF_PLL3 (0x1 << 2) +#define MXC_CCM_CISR_LRF_PLL2 (0x1 << 1) +#define MXC_CCM_CISR_LRF_PLL1 (0x1) + +/* Define the bits in register CIMR */ +#define MXC_CCM_CIMR_MASK_ARM_PODF_LOADED (0x1 << 25) +#define MXC_CCM_CIMR_MASK_NFC_IPG_INT_MEM_PODF_LOADED (0x1 << 21) +#define MXC_CCM_CIMR_MASK_EMI_PODF_LOADED (0x1 << 20) +#define MXC_CCM_CIMR_MASK_AXI_C_PODF_LOADED (0x1 << 19) +#define MXC_CCM_CIMR_MASK_AXI_B_PODF_LOADED (0x1 << 18) +#define MXC_CCM_CIMR_MASK_AXI_A_PODF_LOADED (0x1 << 17) +#define MXC_CCM_CIMR_MASK_DIVIDER_LOADED (0x1 << 16) +#define MXC_CCM_CIMR_MASK_COSC_READY (0x1 << 5) +#define MXC_CCM_CIMR_MASK_CKIH_READY (0x1 << 4) +#define MXC_CCM_CIMR_MASK_FPM_READY (0x1 << 3) +#define MXC_CCM_CIMR_MASK_LRF_PLL3 (0x1 << 2) +#define MXC_CCM_CIMR_MASK_LRF_PLL2 (0x1 << 1) +#define MXC_CCM_CIMR_MASK_LRF_PLL1 (0x1) + +/* Define the bits in register CCOSR */ +#define MXC_CCM_CCOSR_CKO2_EN_OFFSET (0x1 << 24) +#define MXC_CCM_CCOSR_CKO2_DIV_OFFSET (21) +#define MXC_CCM_CCOSR_CKO2_DIV_MASK (0x7 << 21) +#define MXC_CCM_CCOSR_CKO2_SEL_OFFSET (16) +#define MXC_CCM_CCOSR_CKO2_SEL_MASK (0x1F << 16) +#define MXC_CCM_CCOSR_CKOL_EN (0x1 << 7) +#define MXC_CCM_CCOSR_CKOL_DIV_OFFSET (4) +#define MXC_CCM_CCOSR_CKOL_DIV_MASK (0x7 << 4) +#define MXC_CCM_CCOSR_CKOL_SEL_OFFSET (0) +#define MXC_CCM_CCOSR_CKOL_SEL_MASK (0xF) + +/* Define the bits in registers CGPR */ +#define MXC_CCM_CGPR_EFUSE_PROG_SUPPLY_GATE (0x1 << 4) +#define MXC_CCM_CGPR_FPM_SEL (0x1 << 3) +#define MXC_CCM_CGPR_VL_L2BIST_CLKDIV_OFFSET (0) +#define MXC_CCM_CGPR_VL_L2BIST_CLKDIV_MASK (0x7) + +/* Define the bits in registers CCGRx */ +#define MXC_CCM_CCGR_CG_MASK 0x3 + +#define MXC_CCM_CCGR0_CG15_OFFSET 30 +#define MXC_CCM_CCGR0_CG15_MASK (0x3 << 30) +#define MXC_CCM_CCGR0_CG14_OFFSET 28 +#define MXC_CCM_CCGR0_CG14_MASK (0x3 << 28) +#define MXC_CCM_CCGR0_CG13_OFFSET 26 +#define MXC_CCM_CCGR0_CG13_MASK (0x3 << 26) +#define MXC_CCM_CCGR0_CG12_OFFSET 24 +#define MXC_CCM_CCGR0_CG12_MASK (0x3 << 24) +#define MXC_CCM_CCGR0_CG11_OFFSET 22 +#define MXC_CCM_CCGR0_CG11_MASK (0x3 << 22) +#define MXC_CCM_CCGR0_CG10_OFFSET 20 +#define MXC_CCM_CCGR0_CG10_MASK (0x3 << 20) +#define MXC_CCM_CCGR0_CG9_OFFSET 18 +#define MXC_CCM_CCGR0_CG9_MASK (0x3 << 18) +#define MXC_CCM_CCGR0_CG8_OFFSET 16 +#define MXC_CCM_CCGR0_CG8_MASK (0x3 << 16) +#define MXC_CCM_CCGR0_CG7_OFFSET 14 +#define MXC_CCM_CCGR0_CG6_OFFSET 12 +#define MXC_CCM_CCGR0_CG5_OFFSET 10 +#define MXC_CCM_CCGR0_CG5_MASK (0x3 << 10) +#define MXC_CCM_CCGR0_CG4_OFFSET 8 +#define MXC_CCM_CCGR0_CG4_MASK (0x3 << 8) +#define MXC_CCM_CCGR0_CG3_OFFSET 6 +#define MXC_CCM_CCGR0_CG3_MASK (0x3 << 6) +#define MXC_CCM_CCGR0_CG2_OFFSET 4 +#define MXC_CCM_CCGR0_CG2_MASK (0x3 << 4) +#define MXC_CCM_CCGR0_CG1_OFFSET 2 +#define MXC_CCM_CCGR0_CG1_MASK (0x3 << 2) +#define MXC_CCM_CCGR0_CG0_OFFSET 0 +#define MXC_CCM_CCGR0_CG0_MASK 0x3 + +#define MXC_CCM_CCGR1_CG15_OFFSET 30 +#define MXC_CCM_CCGR1_CG14_OFFSET 28 +#define MXC_CCM_CCGR1_CG13_OFFSET 26 +#define MXC_CCM_CCGR1_CG12_OFFSET 24 +#define MXC_CCM_CCGR1_CG11_OFFSET 22 +#define MXC_CCM_CCGR1_CG10_OFFSET 20 +#define MXC_CCM_CCGR1_CG9_OFFSET 18 +#define MXC_CCM_CCGR1_CG8_OFFSET 16 +#define MXC_CCM_CCGR1_CG7_OFFSET 14 +#define MXC_CCM_CCGR1_CG6_OFFSET 12 +#define MXC_CCM_CCGR1_CG5_OFFSET 10 +#define MXC_CCM_CCGR1_CG4_OFFSET 8 +#define MXC_CCM_CCGR1_CG3_OFFSET 6 +#define MXC_CCM_CCGR1_CG2_OFFSET 4 +#define MXC_CCM_CCGR1_CG1_OFFSET 2 +#define MXC_CCM_CCGR1_CG0_OFFSET 0 + +#define MXC_CCM_CCGR2_CG15_OFFSET 30 +#define MXC_CCM_CCGR2_CG14_OFFSET 28 +#define MXC_CCM_CCGR2_CG13_OFFSET 26 +#define MXC_CCM_CCGR2_CG12_OFFSET 24 +#define MXC_CCM_CCGR2_CG11_OFFSET 22 +#define MXC_CCM_CCGR2_CG10_OFFSET 20 +#define MXC_CCM_CCGR2_CG9_OFFSET 18 +#define MXC_CCM_CCGR2_CG8_OFFSET 16 +#define MXC_CCM_CCGR2_CG7_OFFSET 14 +#define MXC_CCM_CCGR2_CG6_OFFSET 12 +#define MXC_CCM_CCGR2_CG5_OFFSET 10 +#define MXC_CCM_CCGR2_CG4_OFFSET 8 +#define MXC_CCM_CCGR2_CG3_OFFSET 6 +#define MXC_CCM_CCGR2_CG2_OFFSET 4 +#define MXC_CCM_CCGR2_CG1_OFFSET 2 +#define MXC_CCM_CCGR2_CG0_OFFSET 0 + +#define MXC_CCM_CCGR3_CG15_OFFSET 30 +#define MXC_CCM_CCGR3_CG14_OFFSET 28 +#define MXC_CCM_CCGR3_CG13_OFFSET 26 +#define MXC_CCM_CCGR3_CG12_OFFSET 24 +#define MXC_CCM_CCGR3_CG11_OFFSET 22 +#define MXC_CCM_CCGR3_CG10_OFFSET 20 +#define MXC_CCM_CCGR3_CG9_OFFSET 18 +#define MXC_CCM_CCGR3_CG8_OFFSET 16 +#define MXC_CCM_CCGR3_CG7_OFFSET 14 +#define MXC_CCM_CCGR3_CG6_OFFSET 12 +#define MXC_CCM_CCGR3_CG5_OFFSET 10 +#define MXC_CCM_CCGR3_CG4_OFFSET 8 +#define MXC_CCM_CCGR3_CG3_OFFSET 6 +#define MXC_CCM_CCGR3_CG2_OFFSET 4 +#define MXC_CCM_CCGR3_CG1_OFFSET 2 +#define MXC_CCM_CCGR3_CG0_OFFSET 0 + +#define MXC_CCM_CCGR4_CG15_OFFSET 30 +#define MXC_CCM_CCGR4_CG14_OFFSET 28 +#define MXC_CCM_CCGR4_CG13_OFFSET 26 +#define MXC_CCM_CCGR4_CG12_OFFSET 24 +#define MXC_CCM_CCGR4_CG11_OFFSET 22 +#define MXC_CCM_CCGR4_CG10_OFFSET 20 +#define MXC_CCM_CCGR4_CG9_OFFSET 18 +#define MXC_CCM_CCGR4_CG8_OFFSET 16 +#define MXC_CCM_CCGR4_CG7_OFFSET 14 +#define MXC_CCM_CCGR4_CG6_OFFSET 12 +#define MXC_CCM_CCGR4_CG5_OFFSET 10 +#define MXC_CCM_CCGR4_CG4_OFFSET 8 +#define MXC_CCM_CCGR4_CG3_OFFSET 6 +#define MXC_CCM_CCGR4_CG2_OFFSET 4 +#define MXC_CCM_CCGR4_CG1_OFFSET 2 +#define MXC_CCM_CCGR4_CG0_OFFSET 0 + +#define MXC_CCM_CCGR5_CG15_OFFSET 30 +#define MXC_CCM_CCGR5_CG14_OFFSET 28 +#define MXC_CCM_CCGR5_CG14_MASK (0x3 << 28) +#define MXC_CCM_CCGR5_CG13_OFFSET 26 +#define MXC_CCM_CCGR5_CG13_MASK (0x3 << 26) +#define MXC_CCM_CCGR5_CG12_OFFSET 24 +#define MXC_CCM_CCGR5_CG12_MASK (0x3 << 24) +#define MXC_CCM_CCGR5_CG11_OFFSET 22 +#define MXC_CCM_CCGR5_CG11_MASK (0x3 << 22) +#define MXC_CCM_CCGR5_CG10_OFFSET 20 +#define MXC_CCM_CCGR5_CG10_MASK (0x3 << 20) +#define MXC_CCM_CCGR5_CG9_OFFSET 18 +#define MXC_CCM_CCGR5_CG9_MASK (0x3 << 18) +#define MXC_CCM_CCGR5_CG8_OFFSET 16 +#define MXC_CCM_CCGR5_CG8_MASK (0x3 << 16) +#define MXC_CCM_CCGR5_CG7_OFFSET 14 +#define MXC_CCM_CCGR5_CG7_MASK (0x3 << 14) +#define MXC_CCM_CCGR5_CG6_OFFSET 12 +#define MXC_CCM_CCGR5_CG5_OFFSET 10 +#define MXC_CCM_CCGR5_CG4_OFFSET 8 +#define MXC_CCM_CCGR5_CG3_OFFSET 6 +#define MXC_CCM_CCGR5_CG2_OFFSET 4 +#define MXC_CCM_CCGR5_CG2_MASK (0x3 << 4) +#define MXC_CCM_CCGR5_CG1_OFFSET 2 +#define MXC_CCM_CCGR5_CG0_OFFSET 0 + +#define MXC_CCM_CCGR6_CG4_OFFSET 8 +#define MXC_CCM_CCGR6_CG4_MASK (0x3 << 8) +#define MXC_CCM_CCGR6_CG3_OFFSET 6 +#define MXC_CCM_CCGR6_CG2_OFFSET 4 +#define MXC_CCM_CCGR6_CG1_OFFSET 2 +#define MXC_CCM_CCGR6_CG0_OFFSET 0 + +#define MXC_CORTEXA8_BASE ARM_BASE_ADDR +#define MXC_GPC_BASE GPC_BASE_ADDR +#define MXC_DPTC_LP_BASE (GPC_BASE_ADDR + 0x80) +#define MXC_DPTC_GP_BASE (GPC_BASE_ADDR + 0x100) +#define MXC_DVFS_CORE_BASE (GPC_BASE_ADDR + 0x180) +#define MXC_DPTC_PER_BASE (GPC_BASE_ADDR + 0x1C0) +#define MXC_PGC_IPU_BASE (GPC_BASE_ADDR + 0x220) +#define MXC_PGC_VPU_BASE (GPC_BASE_ADDR + 0x240) +#define MXC_PGC_GPU_BASE (GPC_BASE_ADDR + 0x260) +#define MXC_SRPG_NEON_BASE (GPC_BASE_ADDR + 0x280) +#define MXC_SRPG_ARM_BASE (GPC_BASE_ADDR + 0x2A0) +#define MXC_SRPG_EMPGC0_BASE (GPC_BASE_ADDR + 0x2C0) +#define MXC_SRPG_EMPGC1_BASE (GPC_BASE_ADDR + 0x2D0) +#define MXC_SRPG_MEGAMIX_BASE (GPC_BASE_ADDR + 0x2E0) +#define MXC_SRPG_EMI_BASE (GPC_BASE_ADDR + 0x300) + +/* CORTEXA8 platform */ +#define MXC_CORTEXA8_PLAT_PVID (MXC_CORTEXA8_BASE + 0x0) +#define MXC_CORTEXA8_PLAT_GPC (MXC_CORTEXA8_BASE + 0x4) +#define MXC_CORTEXA8_PLAT_PIC (MXC_CORTEXA8_BASE + 0x8) +#define MXC_CORTEXA8_PLAT_LPC (MXC_CORTEXA8_BASE + 0xC) +#define MXC_CORTEXA8_PLAT_NEON_LPC (MXC_CORTEXA8_BASE + 0x10) +#define MXC_CORTEXA8_PLAT_ICGC (MXC_CORTEXA8_BASE + 0x14) +#define MXC_CORTEXA8_PLAT_AMC (MXC_CORTEXA8_BASE + 0x18) +#define MXC_CORTEXA8_PLAT_NMC (MXC_CORTEXA8_BASE + 0x20) +#define MXC_CORTEXA8_PLAT_NMS (MXC_CORTEXA8_BASE + 0x24) + +/* DVFS CORE */ +#define MXC_DVFSTHRS (MXC_DVFS_CORE_BASE + 0x00) +#define MXC_DVFSCOUN (MXC_DVFS_CORE_BASE + 0x04) +#define MXC_DVFSSIG1 (MXC_DVFS_CORE_BASE + 0x08) +#define MXC_DVFSSIG0 (MXC_DVFS_CORE_BASE + 0x0C) +#define MXC_DVFSGPC0 (MXC_DVFS_CORE_BASE + 0x10) +#define MXC_DVFSGPC1 (MXC_DVFS_CORE_BASE + 0x14) +#define MXC_DVFSGPBT (MXC_DVFS_CORE_BASE + 0x18) +#define MXC_DVFSEMAC (MXC_DVFS_CORE_BASE + 0x1C) +#define MXC_DVFSCNTR (MXC_DVFS_CORE_BASE + 0x20) +#define MXC_DVFSLTR0_0 (MXC_DVFS_CORE_BASE + 0x24) +#define MXC_DVFSLTR0_1 (MXC_DVFS_CORE_BASE + 0x28) +#define MXC_DVFSLTR1_0 (MXC_DVFS_CORE_BASE + 0x2C) +#define MXC_DVFSLTR1_1 (MXC_DVFS_CORE_BASE + 0x30) +#define MXC_DVFSPT0 (MXC_DVFS_CORE_BASE + 0x34) +#define MXC_DVFSPT1 (MXC_DVFS_CORE_BASE + 0x38) +#define MXC_DVFSPT2 (MXC_DVFS_CORE_BASE + 0x3C) +#define MXC_DVFSPT3 (MXC_DVFS_CORE_BASE + 0x40) + +/* GPC */ +#define MXC_GPC_CNTR (MXC_GPC_BASE + 0x0) +#define MXC_GPC_PGR (MXC_GPC_BASE + 0x4) +#define MXC_GPC_VCR (MXC_GPC_BASE + 0x8) +#define MXC_GPC_ALL_PU (MXC_GPC_BASE + 0xC) +#define MXC_GPC_NEON (MXC_GPC_BASE + 0x10) +#define MXC_GPC_PGR_ARMPG_OFFSET 8 +#define MXC_GPC_PGR_ARMPG_MASK (3 << 8) + +/* PGC */ +#define MXC_PGC_IPU_PGCR (MXC_PGC_IPU_BASE + 0x0) +#define MXC_PGC_IPU_PGSR (MXC_PGC_IPU_BASE + 0xC) +#define MXC_PGC_VPU_PGCR (MXC_PGC_VPU_BASE + 0x0) +#define MXC_PGC_VPU_PGSR (MXC_PGC_VPU_BASE + 0xC) +#define MXC_PGC_GPU_PGCR (MXC_PGC_GPU_BASE + 0x0) +#define MXC_PGC_GPU_PGSR (MXC_PGC_GPU_BASE + 0xC) + +#define MXC_PGCR_PCR 1 +#define MXC_SRPGCR_PCR 1 +#define MXC_EMPGCR_PCR 1 +#define MXC_PGSR_PSR 1 + + +#define MXC_CORTEXA8_PLAT_LPC_DSM (1 << 0) +#define MXC_CORTEXA8_PLAT_LPC_DBG_DSM (1 << 1) + +/* SRPG */ +#define MXC_SRPG_NEON_SRPGCR (MXC_SRPG_NEON_BASE + 0x0) +#define MXC_SRPG_NEON_PUPSCR (MXC_SRPG_NEON_BASE + 0x4) +#define MXC_SRPG_NEON_PDNSCR (MXC_SRPG_NEON_BASE + 0x8) + +#define MXC_SRPG_ARM_SRPGCR (MXC_SRPG_ARM_BASE + 0x0) +#define MXC_SRPG_ARM_PUPSCR (MXC_SRPG_ARM_BASE + 0x4) +#define MXC_SRPG_ARM_PDNSCR (MXC_SRPG_ARM_BASE + 0x8) + +#define MXC_SRPG_EMPGC0_SRPGCR (MXC_SRPG_EMPGC0_BASE + 0x0) +#define MXC_SRPG_EMPGC0_PUPSCR (MXC_SRPG_EMPGC0_BASE + 0x4) +#define MXC_SRPG_EMPGC0_PDNSCR (MXC_SRPG_EMPGC0_BASE + 0x8) + +#define MXC_SRPG_EMPGC1_SRPGCR (MXC_SRPG_EMPGC1_BASE + 0x0) +#define MXC_SRPG_EMPGC1_PUPSCR (MXC_SRPG_EMPGC1_BASE + 0x4) +#define MXC_SRPG_EMPGC1_PDNSCR (MXC_SRPG_EMPGC1_BASE + 0x8) + +#define MXC_SRPG_MEGAMIX_SRPGCR (MXC_SRPG_MEGAMIX_BASE + 0x0) +#define MXC_SRPG_MEGAMIX_PUPSCR (MXC_SRPG_MEGAMIX_BASE + 0x4) +#define MXC_SRPG_MEGAMIX_PDNSCR (MXC_SRPG_MEGAMIX_BASE + 0x8) + +#define MXC_SRPGC_EMI_SRPGCR (MXC_SRPGC_EMI_BASE + 0x0) +#define MXC_SRPGC_EMI_PUPSCR (MXC_SRPGC_EMI_BASE + 0x4) +#define MXC_SRPGC_EMI_PDNSCR (MXC_SRPGC_EMI_BASE + 0x8) + +#ifndef __ASSEMBLE__ +extern unsigned int __get_mcu_main_clk(void); +extern void mxc_show_clocks(void); +#endif +#endif /* __ARCH_ARM_MACH_MX51_CRM_REGS_H__ */ diff --git a/cpu/arm_cortexa8/mx51/interrupts.c b/cpu/arm_cortexa8/mx51/interrupts.c new file mode 100644 index 0000000..c0d70ac --- /dev/null +++ b/cpu/arm_cortexa8/mx51/interrupts.c @@ -0,0 +1,33 @@ +/* + * (C) Copyright 2007 + * Sascha Hauer, Pengutronix + * + * (C) Copyright 2009 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/arch/mx51.h> + +/* nothing really to do with interrupts. */ +int interrupt_init(void) +{ + return 0; +} diff --git a/cpu/arm_cortexa8/mx51/iomux.c b/cpu/arm_cortexa8/mx51/iomux.c new file mode 100644 index 0000000..80082aa --- /dev/null +++ b/cpu/arm_cortexa8/mx51/iomux.c @@ -0,0 +1,199 @@ +/* + * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/*! + * @defgroup GPIO_MX51 Board GPIO and Muxing Setup + * @ingroup MSL_MX51 + */ +/*! + * @file mach-mx51/iomux.c + * + * @brief I/O Muxing control functions + * + * @ingroup GPIO_MX51 + */ +#include <common.h> +#include <asm/io.h> +#include <asm/arch/mx51.h> +#include <asm/arch/mx51_pins.h> +#include <asm/arch/iomux.h> + +/*! + * IOMUX register (base) addresses + */ +enum iomux_reg_addr { + IOMUXGPR0 = IOMUXC_BASE_ADDR, + IOMUXGPR1 = IOMUXC_BASE_ADDR + 0x004, + IOMUXSW_MUX_CTL = IOMUXC_BASE_ADDR, + IOMUXSW_MUX_END = IOMUXC_BASE_ADDR + MUX_I_END, + IOMUXSW_PAD_CTL = IOMUXC_BASE_ADDR + PAD_I_START, + IOMUXSW_INPUT_CTL = IOMUXC_BASE_ADDR, +}; + +#define MUX_PIN_NUM_MAX (((MUX_I_END - MUX_I_START) >> 2) + 1) + +static inline u32 _get_mux_reg(iomux_pin_name_t pin) +{ + u32 mux_reg = PIN_TO_IOMUX_MUX(pin); + + if (is_soc_rev(CHIP_REV_2_0) < 0) { + if ((pin == MX51_PIN_NANDF_RB5) || + (pin == MX51_PIN_NANDF_RB6) || + (pin == MX51_PIN_NANDF_RB7)) + ; /* Do nothing */ + else if (mux_reg >= 0x2FC) + mux_reg += 8; + else if (mux_reg >= 0x130) + mux_reg += 0xC; + } + mux_reg += IOMUXSW_MUX_CTL; + return mux_reg; +} + +static inline u32 _get_pad_reg(iomux_pin_name_t pin) +{ + u32 pad_reg = PIN_TO_IOMUX_PAD(pin); + + if (is_soc_rev(CHIP_REV_2_0) < 0) { + if ((pin == MX51_PIN_NANDF_RB5) || + (pin == MX51_PIN_NANDF_RB6) || + (pin == MX51_PIN_NANDF_RB7)) + ; /* Do nothing */ + else if (pad_reg == 0x4D0 - PAD_I_START) + pad_reg += 0x4C; + else if (pad_reg == 0x860 - PAD_I_START) + pad_reg += 0x9C; + else if (pad_reg >= 0x804 - PAD_I_START) + pad_reg += 0xB0; + else if (pad_reg >= 0x7FC - PAD_I_START) + pad_reg += 0xB4; + else if (pad_reg >= 0x4E4 - PAD_I_START) + pad_reg += 0xCC; + else + pad_reg += 8; + } + pad_reg += IOMUXSW_PAD_CTL; + return pad_reg; +} + +static inline u32 _get_mux_end(void) +{ + if (is_soc_rev(CHIP_REV_2_0) < 0) + return IOMUXC_BASE_ADDR + (0x3F8 - 4); + else + return IOMUXC_BASE_ADDR + (0x3F0 - 4); +} + +/*! + * This function is used to configure a pin through the IOMUX module. + * FIXED ME: for backward compatible. Will be static function! + * @param pin a pin number as defined in \b #iomux_pin_name_t + * @param cfg an output function as defined in \b #iomux_pin_cfg_t + * + * @return 0 if successful; Non-zero otherwise + */ +static int iomux_config_mux(iomux_pin_name_t pin, iomux_pin_cfg_t cfg) +{ + u32 mux_reg = _get_mux_reg(pin); + + if ((mux_reg > _get_mux_end()) || (mux_reg < IOMUXSW_MUX_CTL)) + return -1; + if (cfg == IOMUX_CONFIG_GPIO) + writel(PIN_TO_ALT_GPIO(pin), mux_reg); + else + writel(cfg, mux_reg); + + return 0; +} + +/*! + * Request ownership for an IO pin. This function has to be the first one + * being called before that pin is used. The caller has to check the + * return value to make sure it returns 0. + * + * @param pin a name defined by \b iomux_pin_name_t + * @param cfg an input function as defined in \b #iomux_pin_cfg_t + * + * @return 0 if successful; Non-zero otherwise + */ +int mxc_request_iomux(iomux_pin_name_t pin, iomux_pin_cfg_t cfg) +{ + int ret = iomux_config_mux(pin, cfg); + return ret; +} + +/*! + * Release ownership for an IO pin + * + * @param pin a name defined by \b iomux_pin_name_t + * @param cfg an input function as defined in \b #iomux_pin_cfg_t + */ +void mxc_free_iomux(iomux_pin_name_t pin, iomux_pin_cfg_t cfg) +{ +} + +/*! + * This function configures the pad value for a IOMUX pin. + * + * @param pin a pin number as defined in \b #iomux_pin_name_t + * @param config the ORed value of elements defined in \b #iomux_pad_config_t + */ +void mxc_iomux_set_pad(iomux_pin_name_t pin, u32 config) +{ + u32 pad_reg = _get_pad_reg(pin); + writel(config, pad_reg); +} + +unsigned int mxc_iomux_get_pad(iomux_pin_name_t pin) +{ + u32 pad_reg = _get_pad_reg(pin); + return readl(pad_reg); +} +/*! + * This function configures input path. + * + * @param input index of input select register as defined in \b + * #iomux_input_select_t + * @param config the binary value of elements defined in \b + * #iomux_input_config_t + */ +void mxc_iomux_set_input(iomux_input_select_t input, u32 config) +{ + u32 reg = IOMUXSW_INPUT_CTL + (input << 2); + + if (is_soc_rev(CHIP_REV_2_0) < 0) { + if (input == MUX_IN_IPU_IPP_DI_0_IND_DISPB_SD_D_SELECT_INPUT) + input -= 4; + else if (input == + MUX_IN_IPU_IPP_DI_1_IND_DISPB_SD_D_SELECT_INPUT) + input -= 3; + else if (input >= MUX_IN_KPP_IPP_IND_COL_6_SELECT_INPUT) + input -= 2; + else if (input >= + MUX_IN_HSC_MIPI_MIX_PAR_SISG_TRIG_SELECT_INPUT) + input -= 5; + else if (input >= + MUX_IN_HSC_MIPI_MIX_IPP_IND_SENS1_DATA_EN_SELECT_INPUT) + input -= 3; + else if (input >= MUX_IN_ECSPI2_IPP_IND_SS_B_3_SELECT_INPUT) + input -= 2; + else if (input >= MUX_IN_CCM_PLL1_BYPASS_CLK_SELECT_INPUT) + input -= 1; + + reg += INPUT_CTL_START_TO1; + } else { + reg += INPUT_CTL_START; + } + + writel(config, reg); +} diff --git a/cpu/arm_cortexa8/mx51/serial.c b/cpu/arm_cortexa8/mx51/serial.c new file mode 100644 index 0000000..580ac13 --- /dev/null +++ b/cpu/arm_cortexa8/mx51/serial.c @@ -0,0 +1,223 @@ +/* + * (c) 2007 Sascha Hauer <s.hauer(a)pengutronix.de> + * + * (C) Copyright 2009 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include <common.h> +#include <asm/io.h> +#ifdef CONFIG_SERIAL +#define SERIAL_BASE CONFIG_SERIAL + +#ifdef CONFIG_SERIAL_MULTI +#error "CONFIG_SERIAL_MULTI can not exist with CONFIG_SERIAL" +#endif + +#include <asm/arch/mx51.h> + +/* Register definitions */ +#define URXD 0x0 /* Receiver Register */ +#define UTXD 0x40 /* Transmitter Register */ +#define UCR1 0x80 /* Control Register 1 */ +#define UCR2 0x84 /* Control Register 2 */ +#define UCR3 0x88 /* Control Register 3 */ +#define UCR4 0x8c /* Control Register 4 */ +#define UFCR 0x90 /* FIFO Control Register */ +#define USR1 0x94 /* Status Register 1 */ +#define USR2 0x98 /* Status Register 2 */ +#define UESC 0x9c /* Escape Character Register */ +#define UTIM 0xa0 /* Escape Timer Register */ +#define UBIR 0xa4 /* BRM Incremental Register */ +#define UBMR 0xa8 /* BRM Modulator Register */ +#define UBRC 0xac /* Baud Rate Count Register */ +#define UTS 0xb4 /* UART Test Register (mx31) */ + +/* UART Control Register Bit Fields.*/ +#define URXD_CHARRDY (1<<15) +#define URXD_ERR (1<<14) +#define URXD_OVRRUN (1<<13) +#define URXD_FRMERR (1<<12) +#define URXD_BRK (1<<11) +#define URXD_PRERR (1<<10) +#define UCR1_ADEN (1<<15) /* Auto dectect interrupt */ +#define UCR1_ADBR (1<<14) /* Auto detect baud rate */ +#define UCR1_TRDYEN (1<<13) /* Transmitter ready interrupt enable */ +#define UCR1_IDEN (1<<12) /* Idle condition interrupt */ +#define UCR1_RRDYEN (1<<9) /* Recv ready interrupt enable */ +#define UCR1_RDMAEN (1<<8) /* Recv ready DMA enable */ +#define UCR1_IREN (1<<7) /* Infrared interface enable */ +#define UCR1_TXMPTYEN (1<<6) /* Transimitter empty interrupt enable */ +#define UCR1_RTSDEN (1<<5) /* RTS delta interrupt enable */ +#define UCR1_SNDBRK (1<<4) /* Send break */ +#define UCR1_TDMAEN (1<<3) /* Transmitter ready DMA enable */ +#define UCR1_UARTCLKEN (1<<2) /* UART clock enabled */ +#define UCR1_DOZE (1<<1) /* Doze */ +#define UCR1_UARTEN (1<<0) /* UART enabled */ +#define UCR2_ESCI (1<<15) /* Escape seq interrupt enable */ +#define UCR2_IRTS (1<<14) /* Ignore RTS pin */ +#define UCR2_CTSC (1<<13) /* CTS pin control */ +#define UCR2_CTS (1<<12) /* Clear to send */ +#define UCR2_ESCEN (1<<11) /* Escape enable */ +#define UCR2_PREN (1<<8) /* Parity enable */ +#define UCR2_PROE (1<<7) /* Parity odd/even */ +#define UCR2_STPB (1<<6) /* Stop */ +#define UCR2_WS (1<<5) /* Word size */ +#define UCR2_RTSEN (1<<4) /* Request to send interrupt enable */ +#define UCR2_TXEN (1<<2) /* Transmitter enabled */ +#define UCR2_RXEN (1<<1) /* Receiver enabled */ +#define UCR2_SRST (1<<0) /* SW reset */ +#define UCR3_DTREN (1<<13) /* DTR interrupt enable */ +#define UCR3_PARERREN (1<<12) /* Parity enable */ +#define UCR3_FRAERREN (1<<11) /* Frame error interrupt enable */ +#define UCR3_DSR (1<<10) /* Data set ready */ +#define UCR3_DCD (1<<9) /* Data carrier detect */ +#define UCR3_RI (1<<8) /* Ring indicator */ +#define UCR3_TIMEOUTEN (1<<7) /* Timeout interrupt enable */ +#define UCR3_RXDSEN (1<<6) /* Receive status interrupt enable */ +#define UCR3_AIRINTEN (1<<5) /* Async IR wake interrupt enable */ +#define UCR3_AWAKEN (1<<4) /* Async wake interrupt enable */ +#define UCR3_REF25 (1<<3) /* Ref freq 25 MHz */ +#define UCR3_REF30 (1<<2) /* Ref Freq 30 MHz */ +#define UCR3_INVT (1<<1) /* Inverted Infrared transmission */ +#define UCR3_BPEN (1<<0) /* Preset registers enable */ +#define UCR4_CTSTL_32 (32<<10) /* CTS trigger level (32 chars) */ +#define UCR4_INVR (1<<9) /* Inverted infrared reception */ +#define UCR4_ENIRI (1<<8) /* Serial infrared interrupt enable */ +#define UCR4_WKEN (1<<7) /* Wake interrupt enable */ +#define UCR4_REF16 (1<<6) /* Ref freq 16 MHz */ +#define UCR4_IRSC (1<<5) /* IR special case */ +#define UCR4_TCEN (1<<3) /* Transmit complete interrupt enable */ +#define UCR4_BKEN (1<<2) /* Break condition interrupt enable */ +#define UCR4_OREN (1<<1) /* Receiver overrun interrupt enable */ +#define UCR4_DREN (1<<0) /* Recv data ready interrupt enable */ +#define UFCR_RXTL_SHF 0 /* Receiver trigger level shift */ +#define UFCR_RFDIV (7<<7) /* Reference freq divider mask */ +#define UFCR_TXTL_SHF 10 /* Transmitter trigger level shift */ +#define USR1_PARITYERR (1<<15) /* Parity error interrupt flag */ +#define USR1_RTSS (1<<14) /* RTS pin status */ +#define USR1_TRDY (1<<13)/* Transmitter ready interrupt/dma flag */ +#define USR1_RTSD (1<<12) /* RTS delta */ +#define USR1_ESCF (1<<11) /* Escape seq interrupt flag */ +#define USR1_FRAMERR (1<<10) /* Frame error interrupt flag */ +#define USR1_RRDY (1<<9) /* Receiver ready interrupt/dma flag */ +#define USR1_TIMEOUT (1<<7) /* Receive timeout interrupt status */ +#define USR1_RXDS (1<<6) /* Receiver idle interrupt flag */ +#define USR1_AIRINT (1<<5) /* Async IR wake interrupt flag */ +#define USR1_AWAKE (1<<4) /* Aysnc wake interrupt flag */ +#define USR2_ADET (1<<15) /* Auto baud rate detect complete */ +#define USR2_TXFE (1<<14) /* Transmit buffer FIFO empty */ +#define USR2_DTRF (1<<13) /* DTR edge interrupt flag */ +#define USR2_IDLE (1<<12) /* Idle condition */ +#define USR2_IRINT (1<<8) /* Serial infrared interrupt flag */ +#define USR2_WAKE (1<<7) /* Wake */ +#define USR2_RTSF (1<<4) /* RTS edge interrupt flag */ +#define USR2_TXDC (1<<3) /* Transmitter complete */ +#define USR2_BRCD (1<<2) /* Break condition */ +#define USR2_ORE (1<<1) /* Overrun error */ +#define USR2_RDR (1<<0) /* Recv data ready */ +#define UTS_FRCPERR (1<<13) /* Force parity error */ +#define UTS_LOOP (1<<12) /* Loop tx and rx */ +#define UTS_TXEMPTY (1<<6) /* TxFIFO empty */ +#define UTS_RXEMPTY (1<<5) /* RxFIFO empty */ +#define UTS_TXFULL (1<<4) /* TxFIFO full */ +#define UTS_RXFULL (1<<3) /* RxFIFO full */ +#define UTS_SOFTRST (1<<0) /* Software reset */ + +DECLARE_GLOBAL_DATA_PTR; + +void serial_setbrg(void) +{ + u32 clk = mxc_get_clock(MXC_UART_CLK); + + if (!gd->baudrate) + gd->baudrate = CONFIG_BAUDRATE; + + /* divide input clock by 2 */ + __raw_writel(0x4 << 7, SERIAL_BASE + UFCR); + __raw_writel(0xF, SERIAL_BASE + UBIR); + __raw_writel(clk / (2 * gd->baudrate), SERIAL_BASE + UBMR); +} + +int serial_getc(void) +{ + while (__raw_readl(SERIAL_BASE + UTS) & UTS_RXEMPTY) + ; + return __raw_readl(SERIAL_BASE + URXD); +} + +void serial_putc(const char c) +{ + __raw_writel(c, SERIAL_BASE + UTXD); + + /* wait for transmitter to be ready */ + while (!(__raw_readl(SERIAL_BASE + UTS) & UTS_TXEMPTY)) + ; + + /* If \n, also do \r */ + if (c == '\n') + serial_putc('\r'); +} + +/* + * Test whether a character is in the RX buffer + */ +int serial_tstc(void) +{ + /* If receive fifo is empty, return false */ + if (__raw_readl(SERIAL_BASE + UTS) & UTS_RXEMPTY) + return 0; + return 1; +} + +void serial_puts(const char *s) +{ + while (*s) + serial_putc(*s++); +} + +/* + * Initialise the serial port with the given baudrate. The settings + * are always 8 data bits, no parity, 1 stop bit, no start bits. + * + */ +int serial_init(void) +{ + __raw_writel(0x0, SERIAL_BASE + UCR1); + __raw_writel(0x0, SERIAL_BASE + UCR2); + + while (!(__raw_readl(SERIAL_BASE + UCR2) & UCR2_SRST)) + ; + + __raw_writel(0x0704, SERIAL_BASE + UCR3); + __raw_writel(0x8000, SERIAL_BASE + UCR4); + __raw_writel(0x002B, SERIAL_BASE + UESC); + __raw_writel(0x0, SERIAL_BASE + UTIM); + + __raw_writel(0x0, SERIAL_BASE + UTS); + + serial_setbrg(); + + __raw_writel(UCR2_WS | UCR2_IRTS | UCR2_RXEN | UCR2_TXEN | UCR2_SRST, + SERIAL_BASE + UCR2); + + __raw_writel(UCR1_UARTEN, SERIAL_BASE + UCR1); + + return 0; +} + +#endif /* CONFIG_SERIAL */ diff --git a/cpu/arm_cortexa8/mx51/soc.c b/cpu/arm_cortexa8/mx51/soc.c new file mode 100644 index 0000000..cd8ce9d --- /dev/null +++ b/cpu/arm_cortexa8/mx51/soc.c @@ -0,0 +1,66 @@ +/* + * (C) Copyright 2007 + * Sascha Hauer, Pengutronix + * + * (C) Copyright 2009 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/arch/mx51.h> +#include <asm/errno.h> +#include <asm/io.h> +#include "crm_regs.h" + +#if defined(CONFIG_DISPLAY_CPUINFO) +int print_cpuinfo(void) +{ + printf("CPU: Freescale i.MX51 family %d.%dV at %d MHz\n", + (get_board_rev() & 0xFF) >> 4, + (get_board_rev() & 0xF), + __get_mcu_main_clk() / 1000000); + mxc_show_clocks(); + return 0; +} +#endif + +/* + * Initializes on-chip ethernet controllers. + * to override, implement board_eth_init() + */ +#if defined(CONFIG_MXC_FEC) +extern int mxc_fec_initialize(bd_t *bis); +#endif + +int cpu_eth_init(bd_t *bis) +{ + int rc = -ENODEV; + +#if defined(CONFIG_MXC_FEC) + rc = mxc_fec_initialize(bis); +#endif + + return rc; +} + +void reset_cpu(ulong addr) +{ + __raw_writew(4, WDOG1_BASE_ADDR); +} diff --git a/cpu/arm_cortexa8/mx51/timer.c b/cpu/arm_cortexa8/mx51/timer.c new file mode 100644 index 0000000..5201768 --- /dev/null +++ b/cpu/arm_cortexa8/mx51/timer.c @@ -0,0 +1,112 @@ +/* + * (C) Copyright 2007 + * Sascha Hauer, Pengutronix + * + * (C) Copyright 2009 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/mx51.h> + +/* General purpose timers registers */ +#define GPTCR GPT1_BASE_ADDR /* Control register */ +#define GPTPR (GPT1_BASE_ADDR + 0x4) /* Prescaler register */ +#define GPTSR (GPT1_BASE_ADDR + 0x8) /* Status register */ +#define GPTCNT (GPT1_BASE_ADDR + 0x24) /* Counter register */ + +/* General purpose timers bitfields */ +#define GPTCR_SWR (1<<15) /* Software reset */ +#define GPTCR_FRR (1<<9) /* Freerun / restart */ +#define GPTCR_CLKSOURCE_32 (4<<6) /* Clock source */ +#define GPTCR_TEN (1) /* Timer enable */ + +int timer_init(void) +{ + int i; + + /* setup GP Timer 1 */ + __raw_writel(GPTCR_SWR, GPTCR); + for (i = 0; i < 100; i++) + __raw_writel(0, GPTCR); /* We have no udelay by now */ + + __raw_writel(0, GPTPR); /* 32Khz */ + + /* Freerun Mode, PERCLK1 input */ + i = __raw_readl(GPTCR); + __raw_writel(i | GPTCR_CLKSOURCE_32 | GPTCR_TEN, GPTCR); + return 0; +} + +void reset_timer(void) +{ + reset_timer_masked(); +} + +void reset_timer_masked(void) +{ + __raw_writel(0, GPTCR); + /* Freerun Mode, PERCLK1 input */ + __raw_writel(GPTCR_CLKSOURCE_32 | GPTCR_TEN, GPTCR); +} + +ulong get_timer_masked(void) +{ + ulong val = __raw_readl(GPTCNT); + return val; +} + +ulong get_timer(ulong base) +{ + return get_timer_masked() - base; +} + +void set_timer(ulong t) +{ +} + +/* delay x useconds AND perserve advance timstamp value */ +void udelay(unsigned long usec) +{ + ulong tmo, tmp; + + /* if "big" number, spread normalization to seconds */ + if (usec >= 1000) { + /* start to normalize for usec to ticks per sec */ + tmo = usec / 1000; + /* find number of "ticks" to wait to achieve target */ + tmo *= CONFIG_SYS_HZ; + tmo /= 1000; /* finish normalize. */ + } else {/* else small number, don't kill it prior to HZ multiply */ + tmo = usec * CONFIG_SYS_HZ; + tmo /= (1000 * 1000); + } + + tmp = get_timer(0); /* get current timestamp */ + /* if setting this forward will roll time stamp */ + if ((tmo + tmp + 1) < tmp) + /* reset "advancing" timestamp to 0, set lastinc value */ + reset_timer_masked(); + else /* else, set advancing stamp wake up time */ + tmo += tmp; + while (get_timer_masked() < tmo) /* loop till event */ + /*NOP*/; +} diff --git a/include/asm-arm/arch-mx51/iomux.h b/include/asm-arm/arch-mx51/iomux.h new file mode 100644 index 0000000..fa02984 --- /dev/null +++ b/include/asm-arm/arch-mx51/iomux.h @@ -0,0 +1,240 @@ +/* + * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#ifndef __MACH_MX51_IOMUX_H__ +#define __MACH_MX51_IOMUX_H__ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/mx51.h> +#include <asm/arch/mx51_pins.h> + +/*! + * @file iomux.h + * + * @brief I/O Muxing control definitions and functions + * + * @ingroup GPIO_MX51 + */ + +typedef unsigned int iomux_pin_name_t; + +/*! + * various IOMUX output functions + */ +typedef enum iomux_config { + IOMUX_CONFIG_ALT0, /*!< used as alternate function 0 */ + IOMUX_CONFIG_ALT1, /*!< used as alternate function 1 */ + IOMUX_CONFIG_ALT2, /*!< used as alternate function 2 */ + IOMUX_CONFIG_ALT3, /*!< used as alternate function 3 */ + IOMUX_CONFIG_ALT4, /*!< used as alternate function 4 */ + IOMUX_CONFIG_ALT5, /*!< used as alternate function 5 */ + IOMUX_CONFIG_ALT6, /*!< used as alternate function 6 */ + IOMUX_CONFIG_ALT7, /*!< used as alternate function 7 */ + IOMUX_CONFIG_GPIO, /*!< added to help user use GPIO mode */ + IOMUX_CONFIG_SION = 0x1 << 4, /*!< used as LOOPBACK:MUX SION bit */ +} iomux_pin_cfg_t; + +/*! + * various IOMUX pad functions + */ +typedef enum iomux_pad_config { + PAD_CTL_SRE_SLOW = 0x0 << 0, + PAD_CTL_SRE_FAST = 0x1 << 0, + PAD_CTL_DRV_LOW = 0x0 << 1, + PAD_CTL_DRV_MEDIUM = 0x1 << 1, + PAD_CTL_DRV_HIGH = 0x2 << 1, + PAD_CTL_DRV_MAX = 0x3 << 1, + PAD_CTL_ODE_OPENDRAIN_NONE = 0x0 << 3, + PAD_CTL_ODE_OPENDRAIN_ENABLE = 0x1 << 3, + PAD_CTL_100K_PD = 0x0 << 4, + PAD_CTL_47K_PU = 0x1 << 4, + PAD_CTL_100K_PU = 0x2 << 4, + PAD_CTL_22K_PU = 0x3 << 4, + PAD_CTL_PUE_KEEPER = 0x0 << 6, + PAD_CTL_PUE_PULL = 0x1 << 6, + PAD_CTL_PKE_NONE = 0x0 << 7, + PAD_CTL_PKE_ENABLE = 0x1 << 7, + PAD_CTL_HYS_NONE = 0x0 << 8, + PAD_CTL_HYS_ENABLE = 0x1 << 8, + PAD_CTL_DDR_INPUT_CMOS = 0x0 << 9, + PAD_CTL_DDR_INPUT_DDR = 0x1 << 9, + PAD_CTL_DRV_VOT_LOW = 0x0 << 13, + PAD_CTL_DRV_VOT_HIGH = 0x1 << 13, +} iomux_pad_config_t; + +/*! + * various IOMUX input select register index + */ +typedef enum iomux_input_select { + MUX_IN_AUDMUX_P4_INPUT_DA_AMX_SELECT_I = 0, + MUX_IN_AUDMUX_P4_INPUT_DB_AMX_SELECT_I, + MUX_IN_AUDMUX_P4_INPUT_TXCLK_AMX_SELECT_INPUT, + MUX_IN_AUDMUX_P4_INPUT_TXFS_AMX_SELECT_INPUT, + MUX_IN_AUDMUX_P5_INPUT_DA_AMX_SELECT_INPUT, + MUX_IN_AUDMUX_P5_INPUT_DB_AMX_SELECT_INPUT, + MUX_IN_AUDMUX_P5_INPUT_RXCLK_AMX_SELECT_INPUT, + MUX_IN_AUDMUX_P5_INPUT_RXFS_AMX_SELECT, + MUX_IN_AUDMUX_P5_INPUT_TXCLK_AMX_SELECT_INPUT, + MUX_IN_AUDMUX_P5_INPUT_TXFS_AMX_SELECT_INPUT, + MUX_IN_AUDMUX_P6_INPUT_DA_AMX_SELECT_INPUT, + MUX_IN_AUDMUX_P6_INPUT_DB_AMX_SELECT_INPUT, + MUX_IN_AUDMUX_P6_INPUT_RXCLK_AMX_SELECT_INPUT, + MUX_IN_AUDMUX_P6_INPUT_RXFS_AMX_SELECT_INPUT, + MUX_IN_AUDMUX_P6_INPUT_TXCLK_AMX_SELECT_INPUT, + MUX_IN_AUDMUX_P6_INPUT_TXFS_AMX_SELECT_INPUT, + MUX_IN_CCM_IPP_DI_CLK_SELECT_INPUT, + /* TO2 */ + MUX_IN_CCM_IPP_DI1_CLK_SELECT_INPUT, + MUX_IN_CCM_PLL1_BYPASS_CLK_SELECT_INPUT, + MUX_IN_CCM_PLL2_BYPASS_CLK_SELECT_INPUT, + MUX_IN_CSPI_IPP_CSPI_CLK_IN_SELECT_INPUT, + MUX_IN_CSPI_IPP_IND_MISO_SELECT_INPUT, + MUX_IN_CSPI_IPP_IND_MOSI_SELECT_INPUT, + MUX_IN_CSPI_IPP_IND_SS_B_1_SELECT_INPUT, + MUX_IN_CSPI_IPP_IND_SS_B_2_SELECT_INPUT, + MUX_IN_CSPI_IPP_IND_SS_B_3_SELECT_INPUT, + MUX_IN_DPLLIP1_L1T_TOG_EN_SELECT_INPUT, + /* TO2 */ + MUX_IN_ECSPI2_IPP_IND_SS_B_1_SELECT_INPUT, + MUX_IN_ECSPI2_IPP_IND_SS_B_3_SELECT_INPUT, + MUX_IN_EMI_IPP_IND_RDY_INT_SELECT_INPUT, + MUX_IN_ESDHC3_IPP_DAT0_IN_SELECT_INPUT, + MUX_IN_ESDHC3_IPP_DAT1_IN_SELECT_INPUT, + MUX_IN_ESDHC3_IPP_DAT2_IN_SELECT_INPUT, + MUX_IN_ESDHC3_IPP_DAT3_IN_SELECT_INPUT, + MUX_IN_FEC_FEC_COL_SELECT_INPUT, + MUX_IN_FEC_FEC_CRS_SELECT_INPUT, + MUX_IN_FEC_FEC_MDI_SELECT_INPUT, + MUX_IN_FEC_FEC_RDATA_0_SELECT_INPUT, + MUX_IN_FEC_FEC_RDATA_1_SELECT_INPUT, + MUX_IN_FEC_FEC_RDATA_2_SELECT_INPUT, + MUX_IN_FEC_FEC_RDATA_3_SELECT_INPUT, + MUX_IN_FEC_FEC_RX_CLK_SELECT_INPUT, + MUX_IN_FEC_FEC_RX_DV_SELECT_INPUT, + MUX_IN_FEC_FEC_RX_ER_SELECT_INPUT, + MUX_IN_FEC_FEC_TX_CLK_SELECT_INPUT, + MUX_IN_GPIO3_IPP_IND_G_IN_1_SELECT_INPUT, + MUX_IN_GPIO3_IPP_IND_G_IN_2_SELECT_INPUT, + MUX_IN_GPIO3_IPP_IND_G_IN_3_SELECT_INPUT, + MUX_IN_GPIO3_IPP_IND_G_IN_4_SELECT_INPUT, + MUX_IN_GPIO3_IPP_IND_G_IN_5_SELECT_INPUT, + MUX_IN_GPIO3_IPP_IND_G_IN_6_SELECT_INPUT, + MUX_IN_GPIO3_IPP_IND_G_IN_7_SELECT_INPUT, + MUX_IN_GPIO3_IPP_IND_G_IN_8_SELECT_INPUT, + /* TO2 */ + MUX_IN_GPIO3_IPP_IND_G_IN_12_SELECT_INPUT, + MUX_IN_HSC_MIPI_MIX_IPP_IND_SENS1_DATA_EN_SELECT_INPUT, + MUX_IN_HSC_MIPI_MIX_IPP_IND_SENS2_DATA_EN_SELECT_INPUT, + /* TO2 */ + MUX_IN_HSC_MIPI_MIX_PAR_VSYNC_SELECT_INPUT, + /* TO2 */ + MUX_IN_HSC_MIPI_MIX_PAR_DI_WAIT_SELECT_INPUT, + MUX_IN_HSC_MIPI_MIX_PAR_SISG_TRIG_SELECT_INPUT, + MUX_IN_I2C1_IPP_SCL_IN_SELECT_INPUT, + MUX_IN_I2C1_IPP_SDA_IN_SELECT_INPUT, + MUX_IN_I2C2_IPP_SCL_IN_SELECT_INPUT, + MUX_IN_I2C2_IPP_SDA_IN_SELECT_INPUT, + + MUX_IN_IPU_IPP_DI_0_IND_DISPB_SD_D_SELECT_INPUT, + + MUX_IN_IPU_IPP_DI_1_IND_DISPB_SD_D_SELECT_INPUT, + + MUX_IN_KPP_IPP_IND_COL_6_SELECT_INPUT, + MUX_IN_KPP_IPP_IND_COL_7_SELECT_INPUT, + MUX_IN_KPP_IPP_IND_ROW_4_SELECT_INPUT, + MUX_IN_KPP_IPP_IND_ROW_5_SELECT_INPUT, + MUX_IN_KPP_IPP_IND_ROW_6_SELECT_INPUT, + MUX_IN_KPP_IPP_IND_ROW_7_SELECT_INPUT, + MUX_IN_UART1_IPP_UART_RTS_B_SELECT_INPUT, + MUX_IN_UART1_IPP_UART_RXD_MUX_SELECT_INPUT, + MUX_IN_UART2_IPP_UART_RTS_B_SELECT_INPUT, + MUX_IN_UART2_IPP_UART_RXD_MUX_SELECT_INPUT, + MUX_IN_UART3_IPP_UART_RTS_B_SELECT_INPUT, + MUX_IN_UART3_IPP_UART_RXD_MUX_SELECT_INPUT, + MUX_IN_USBOH3_IPP_IND_UH3_CLK_SELECT_INPUT, + MUX_IN_USBOH3_IPP_IND_UH3_DATA_0_SELECT_INPUT, + MUX_IN_USBOH3_IPP_IND_UH3_DATA_1_SELECT_INPUT, + MUX_IN_USBOH3_IPP_IND_UH3_DATA_2_SELECT_INPUT, + MUX_IN_USBOH3_IPP_IND_UH3_DATA_3_SELECT_INPUT, + MUX_IN_USBOH3_IPP_IND_UH3_DATA_4_SELECT_INPUT, + MUX_IN_USBOH3_IPP_IND_UH3_DATA_5_SELECT_INPUT, + MUX_IN_USBOH3_IPP_IND_UH3_DATA_6_SELECT_INPUT, + MUX_IN_USBOH3_IPP_IND_UH3_DATA_7_SELECT_INPUT, + MUX_IN_USBOH3_IPP_IND_UH3_DIR_SELECT_INPUT, + MUX_IN_USBOH3_IPP_IND_UH3_NXT_SELECT_INPUT, + MUX_IN_USBOH3_IPP_IND_UH3_STP_SELECT_INPUT, + MUX_INPUT_NUM_MUX, +} iomux_input_select_t; + +/*! + * various IOMUX input functions + */ +typedef enum iomux_input_config { + INPUT_CTL_PATH0 = 0x0, + INPUT_CTL_PATH1, + INPUT_CTL_PATH2, + INPUT_CTL_PATH3, + INPUT_CTL_PATH4, + INPUT_CTL_PATH5, + INPUT_CTL_PATH6, + INPUT_CTL_PATH7, +} iomux_input_config_t; + +/*! + * Request ownership for an IO pin. This function has to be the first one + * being called before that pin is used. The caller has to check the + * return value to make sure it returns 0. + * + * @param pin a name defined by \b iomux_pin_name_t + * @param config config as defined in \b #iomux_pin_ocfg_t + * + * @return 0 if successful; Non-zero otherwise + */ +int mxc_request_iomux(iomux_pin_name_t pin, iomux_pin_cfg_t config); + +/*! + * Release ownership for an IO pin + * + * @param pin a name defined by \b iomux_pin_name_t + * @param config config as defined in \b #iomux_pin_ocfg_t + */ +void mxc_free_iomux(iomux_pin_name_t pin, iomux_pin_cfg_t config); + +/*! + * This function configures the pad value for a IOMUX pin. + * + * @param pin a pin number as defined in \b #iomux_pin_name_t + * @param config the ORed value of elements defined in + * \b #iomux_pad_config_t + */ +void mxc_iomux_set_pad(iomux_pin_name_t pin, u32 config); + +/*! + * This function gets the current pad value for a IOMUX pin. + * + * @param pin a pin number as defined in \b #iomux_pin_name_t + * @return current pad value + */ +unsigned int mxc_iomux_get_pad(iomux_pin_name_t pin); + +/*! + * This function configures input path. + * + * @param input index of input select register as defined in + * \b #iomux_input_select_t + * @param config the binary value of elements defined in + * \b #iomux_input_config_t + */ +void mxc_iomux_set_input(iomux_input_select_t input, u32 config); + +#endif /* __MACH_MX51_IOMUX_H__ */ diff --git a/include/asm-arm/arch-mx51/mx51.h b/include/asm-arm/arch-mx51/mx51.h new file mode 100644 index 0000000..4532a10 --- /dev/null +++ b/include/asm-arm/arch-mx51/mx51.h @@ -0,0 +1,416 @@ +/* + * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#ifndef __ASM_ARCH_MXC_MX51_H__ +#define __ASM_ARCH_MXC_MX51_H__ + +/* + * IRAM + */ +#define IRAM_BASE_ADDR 0x1FFE8000 /* internal ram */ +/* + * Graphics Memory of GPU + */ +#define GPU_BASE_ADDR 0x20000000 +#define GPU_CTRL_BASE_ADDR 0x30000000 +#define IPU_CTRL_BASE_ADDR 0x40000000 +/* + * Debug + */ +#define DEBUG_BASE_ADDR 0x60000000 +#define ETB_BASE_ADDR (DEBUG_BASE_ADDR + 0x00001000) +#define ETM_BASE_ADDR (DEBUG_BASE_ADDR + 0x00002000) +#define TPIU_BASE_ADDR (DEBUG_BASE_ADDR + 0x00003000) +#define CTI0_BASE_ADDR (DEBUG_BASE_ADDR + 0x00004000) +#define CTI1_BASE_ADDR (DEBUG_BASE_ADDR + 0x00005000) +#define CTI2_BASE_ADDR (DEBUG_BASE_ADDR + 0x00006000) +#define CTI3_BASE_ADDR (DEBUG_BASE_ADDR + 0x00007000) +#define CORTEX_DBG_BASE_ADDR (DEBUG_BASE_ADDR + 0x00008000) + +/* + * SPBA global module enabled #0 + */ +#define SPBA0_BASE_ADDR 0x70000000 + +#define MMC_SDHC1_BASE_ADDR (SPBA0_BASE_ADDR + 0x00004000) +#define MMC_SDHC2_BASE_ADDR (SPBA0_BASE_ADDR + 0x00008000) +#define UART3_BASE_ADDR (SPBA0_BASE_ADDR + 0x0000C000) +#define CSPI1_BASE_ADDR (SPBA0_BASE_ADDR + 0x00010000) +#define SSI2_BASE_ADDR (SPBA0_BASE_ADDR + 0x00014000) +#define MMC_SDHC3_BASE_ADDR (SPBA0_BASE_ADDR + 0x00020000) +#define MMC_SDHC4_BASE_ADDR (SPBA0_BASE_ADDR + 0x00024000) +#define SPDIF_BASE_ADDR (SPBA0_BASE_ADDR + 0x00028000) +#define ATA_DMA_BASE_ADDR (SPBA0_BASE_ADDR + 0x00030000) +#define SLIM_DMA_BASE_ADDR (SPBA0_BASE_ADDR + 0x00034000) +#define HSI2C_DMA_BASE_ADDR (SPBA0_BASE_ADDR + 0x00038000) +#define SPBA_CTRL_BASE_ADDR (SPBA0_BASE_ADDR + 0x0003C000) + +/* + * AIPS 1 + */ +#define AIPS1_BASE_ADDR 0x73F00000 + +#define OTG_BASE_ADDR (AIPS1_BASE_ADDR + 0x00080000) +#define GPIO1_BASE_ADDR (AIPS1_BASE_ADDR + 0x00084000) +#define GPIO2_BASE_ADDR (AIPS1_BASE_ADDR + 0x00088000) +#define GPIO3_BASE_ADDR (AIPS1_BASE_ADDR + 0x0008C000) +#define GPIO4_BASE_ADDR (AIPS1_BASE_ADDR + 0x00090000) +#define KPP_BASE_ADDR (AIPS1_BASE_ADDR + 0x00094000) +#define WDOG1_BASE_ADDR (AIPS1_BASE_ADDR + 0x00098000) +#define WDOG2_BASE_ADDR (AIPS1_BASE_ADDR + 0x0009C000) +#define GPT1_BASE_ADDR (AIPS1_BASE_ADDR + 0x000A0000) +#define SRTC_BASE_ADDR (AIPS1_BASE_ADDR + 0x000A4000) +#define IOMUXC_BASE_ADDR (AIPS1_BASE_ADDR + 0x000A8000) +#define EPIT1_BASE_ADDR (AIPS1_BASE_ADDR + 0x000AC000) +#define EPIT2_BASE_ADDR (AIPS1_BASE_ADDR + 0x000B0000) +#define PWM1_BASE_ADDR (AIPS1_BASE_ADDR + 0x000B4000) +#define PWM2_BASE_ADDR (AIPS1_BASE_ADDR + 0x000B8000) +#define UART1_BASE_ADDR (AIPS1_BASE_ADDR + 0x000BC000) +#define UART2_BASE_ADDR (AIPS1_BASE_ADDR + 0x000C0000) +#define SRC_BASE_ADDR (AIPS1_BASE_ADDR + 0x000D0000) +#define CCM_BASE_ADDR (AIPS1_BASE_ADDR + 0x000D4000) +#define GPC_BASE_ADDR (AIPS1_BASE_ADDR + 0x000D8000) + +/* + * AIPS 2 + */ +#define AIPS2_BASE_ADDR 0x83F00000 + +#define PLL1_BASE_ADDR (AIPS2_BASE_ADDR + 0x00080000) +#define PLL2_BASE_ADDR (AIPS2_BASE_ADDR + 0x00084000) +#define PLL3_BASE_ADDR (AIPS2_BASE_ADDR + 0x00088000) +#define AHBMAX_BASE_ADDR (AIPS2_BASE_ADDR + 0x00094000) +#define IIM_BASE_ADDR (AIPS2_BASE_ADDR + 0x00098000) +#define CSU_BASE_ADDR (AIPS2_BASE_ADDR + 0x0009C000) +#define ARM_BASE_ADDR (AIPS2_BASE_ADDR + 0x000A0000) +#define OWIRE_BASE_ADDR (AIPS2_BASE_ADDR + 0x000A4000) +#define FIRI_BASE_ADDR (AIPS2_BASE_ADDR + 0x000A8000) +#define CSPI2_BASE_ADDR (AIPS2_BASE_ADDR + 0x000AC000) +#define SDMA_BASE_ADDR (AIPS2_BASE_ADDR + 0x000B0000) +#define SCC_BASE_ADDR (AIPS2_BASE_ADDR + 0x000B4000) +#define ROMCP_BASE_ADDR (AIPS2_BASE_ADDR + 0x000B8000) +#define RTIC_BASE_ADDR (AIPS2_BASE_ADDR + 0x000BC000) +#define CSPI3_BASE_ADDR (AIPS2_BASE_ADDR + 0x000C0000) +#define I2C2_BASE_ADDR (AIPS2_BASE_ADDR + 0x000C4000) +#define I2C1_BASE_ADDR (AIPS2_BASE_ADDR + 0x000C8000) +#define SSI1_BASE_ADDR (AIPS2_BASE_ADDR + 0x000CC000) +#define AUDMUX_BASE_ADDR (AIPS2_BASE_ADDR + 0x000D0000) +#define M4IF_BASE_ADDR (AIPS2_BASE_ADDR + 0x000D8000) +#define ESDCTL_BASE_ADDR (AIPS2_BASE_ADDR + 0x000D9000) +#define WEIM_BASE_ADDR (AIPS2_BASE_ADDR + 0x000DA000) +#define NFC_BASE_ADDR (AIPS2_BASE_ADDR + 0x000DB000) +#define EMI_BASE_ADDR (AIPS2_BASE_ADDR + 0x000DBF00) +#define MIPI_HSC_BASE_ADDR (AIPS2_BASE_ADDR + 0x000DC000) +#define ATA_BASE_ADDR (AIPS2_BASE_ADDR + 0x000E0000) +#define SIM_BASE_ADDR (AIPS2_BASE_ADDR + 0x000E4000) +#define SSI3BASE_ADDR (AIPS2_BASE_ADDR + 0x000E8000) +#define FEC_BASE_ADDR (AIPS2_BASE_ADDR + 0x000EC000) +#define TVE_BASE_ADDR (AIPS2_BASE_ADDR + 0x000F0000) +#define VPU_BASE_ADDR (AIPS2_BASE_ADDR + 0x000F4000) +#define SAHARA_BASE_ADDR (AIPS2_BASE_ADDR + 0x000F8000) + +#define TZIC_BASE_ADDR 0x8FFFC000 + +/* + * Memory regions and CS + */ +#define CSD0_BASE_ADDR 0x90000000 +#define CSD1_BASE_ADDR 0xA0000000 +#define CS0_BASE_ADDR 0xB0000000 +#define CS1_BASE_ADDR 0xB8000000 +#define CS2_BASE_ADDR 0xC0000000 +#define CS3_BASE_ADDR 0xC8000000 +#define CS4_BASE_ADDR 0xCC000000 +#define CS5_BASE_ADDR 0xCE000000 + +/* + * NFC + */ +#define NFC_BASE_ADDR_AXI 0xCFFF0000 /* NAND flash AXI */ + +/*! + * defines for SPBA modules + */ +#define SPBA_SDHC1 0x04 +#define SPBA_SDHC2 0x08 +#define SPBA_UART3 0x0C +#define SPBA_CSPI1 0x10 +#define SPBA_SSI2 0x14 +#define SPBA_SDHC3 0x20 +#define SPBA_SDHC4 0x24 +#define SPBA_SPDIF 0x28 +#define SPBA_ATA 0x30 +#define SPBA_SLIM 0x34 +#define SPBA_HSI2C 0x38 +#define SPBA_CTRL 0x3C + +/* + * Interrupt numbers + */ +#define MXC_INT_BASE 0 +#define MXC_INT_RESV0 0 +#define MXC_INT_MMC_SDHC1 1 +#define MXC_INT_MMC_SDHC2 2 +#define MXC_INT_MMC_SDHC3 3 +#define MXC_INT_MMC_SDHC4 4 +#define MXC_INT_RESV5 5 +#define MXC_INT_SDMA 6 +#define MXC_INT_IOMUX 7 +#define MXC_INT_NFC 8 +#define MXC_INT_VPU 9 +#define MXC_INT_IPU_ERR 10 +#define MXC_INT_IPU_SYN 11 +#define MXC_INT_GPU 12 +#define MXC_INT_RESV13 13 +#define MXC_INT_USB_H1 14 +#define MXC_INT_EMI 15 +#define MXC_INT_USB_H2 16 +#define MXC_INT_USB_H3 17 +#define MXC_INT_USB_OTG 18 +#define MXC_INT_SAHARA_H0 19 +#define MXC_INT_SAHARA_H1 20 +#define MXC_INT_SCC_SMN 21 +#define MXC_INT_SCC_STZ 22 +#define MXC_INT_SCC_SCM 23 +#define MXC_INT_SRTC_NTZ 24 +#define MXC_INT_SRTC_TZ 25 +#define MXC_INT_RTIC 26 +#define MXC_INT_CSU 27 +#define MXC_INT_SLIM_B 28 +#define MXC_INT_SSI1 29 +#define MXC_INT_SSI2 30 +#define MXC_INT_UART1 31 +#define MXC_INT_UART2 32 +#define MXC_INT_UART3 33 +#define MXC_INT_RESV34 34 +#define MXC_INT_RESV35 35 +#define MXC_INT_CSPI1 36 +#define MXC_INT_CSPI2 37 +#define MXC_INT_CSPI 38 +#define MXC_INT_GPT 39 +#define MXC_INT_EPIT1 40 +#define MXC_INT_EPIT2 41 +#define MXC_INT_GPIO1_INT7 42 +#define MXC_INT_GPIO1_INT6 43 +#define MXC_INT_GPIO1_INT5 44 +#define MXC_INT_GPIO1_INT4 45 +#define MXC_INT_GPIO1_INT3 46 +#define MXC_INT_GPIO1_INT2 47 +#define MXC_INT_GPIO1_INT1 48 +#define MXC_INT_GPIO1_INT0 49 +#define MXC_INT_GPIO1_LOW 50 +#define MXC_INT_GPIO1_HIGH 51 +#define MXC_INT_GPIO2_LOW 52 +#define MXC_INT_GPIO2_HIGH 53 +#define MXC_INT_GPIO3_LOW 54 +#define MXC_INT_GPIO3_HIGH 55 +#define MXC_INT_GPIO4_LOW 56 +#define MXC_INT_GPIO4_HIGH 57 +#define MXC_INT_WDOG1 58 +#define MXC_INT_WDOG2 59 +#define MXC_INT_KPP 60 +#define MXC_INT_PWM1 61 +#define MXC_INT_I2C1 62 +#define MXC_INT_I2C2 63 +#define MXC_INT_HS_I2C 64 +#define MXC_INT_RESV65 65 +#define MXC_INT_RESV66 66 +#define MXC_INT_SIM_IPB 67 +#define MXC_INT_SIM_DAT 68 +#define MXC_INT_IIM 69 +#define MXC_INT_ATA 70 +#define MXC_INT_CCM1 71 +#define MXC_INT_CCM2 72 +#define MXC_INT_GPC1 73 +#define MXC_INT_GPC2 74 +#define MXC_INT_SRC 75 +#define MXC_INT_NM 76 +#define MXC_INT_PMU 77 +#define MXC_INT_CTI_IRQ 78 +#define MXC_INT_CTI1_TG0 79 +#define MXC_INT_CTI1_TG1 80 +#define MXC_INT_MCG_ERR 81 +#define MXC_INT_MCG_TMR 82 +#define MXC_INT_MCG_FUNC 83 +#define MXC_INT_RESV84 84 +#define MXC_INT_RESV85 85 +#define MXC_INT_RESV86 86 +#define MXC_INT_FEC 87 +#define MXC_INT_OWIRE 88 +#define MXC_INT_CTI1_TG2 89 +#define MXC_INT_SJC 90 +#define MXC_INT_SPDIF 91 +#define MXC_INT_TVE 92 +#define MXC_INT_FIRI 93 +#define MXC_INT_PWM2 94 +#define MXC_INT_SLIM_EXP 95 +#define MXC_INT_SSI3 96 +#define MXC_INT_RESV97 97 +#define MXC_INT_CTI1_TG3 98 +#define MXC_INT_SMC_RX 99 +#define MXC_INT_VPU_IDLE 100 +#define MXC_INT_RESV101 101 +#define MXC_INT_GPU_IDLE 102 + +#define MXC_MAX_INT_LINES 128 + +#define MXC_GPIO_INT_BASE (MXC_MAX_INT_LINES) + +/*! + * Number of GPIO port as defined in the IC Spec + */ +#define GPIO_PORT_NUM 4 +/*! + * Number of GPIO pins per port + */ +#define GPIO_NUM_PIN 32 + +#define MXC_GPIO_SPLIT_IRQ_2 + +#define IIM_SREV 0x24 +#define ROM_SI_REV 0x48 + +#define NFC_BUF_SIZE 0x1000 + +/* WEIM registers */ +#define CSGCR1 0x00 +#define CSGCR2 0x04 +#define CSRCR1 0x08 +#define CSRCR2 0x0C +#define CSWCR1 0x10 + +/* M4IF */ +#define M4IF_FBPM0 0x40 +#define M4IF_FIDBP 0x48 + +/* ESDCTL */ +#define ESDCTL_ESDCTL0 0x00 +#define ESDCTL_ESDCFG0 0x04 +#define ESDCTL_ESDCTL1 0x08 +#define ESDCTL_ESDCFG1 0x0C +#define ESDCTL_ESDMISC 0x10 +#define ESDCTL_ESDSCR 0x14 +#define ESDCTL_ESDCDLY1 0x20 +#define ESDCTL_ESDCDLY2 0x24 +#define ESDCTL_ESDCDLY3 0x28 +#define ESDCTL_ESDCDLY4 0x2C +#define ESDCTL_ESDCDLY5 0x30 +#define ESDCTL_ESDCDLYGD 0x34 + +/* CCM */ +#define CLKCTL_CCR 0x00 +#define CLKCTL_CCDR 0x04 +#define CLKCTL_CSR 0x08 +#define CLKCTL_CCSR 0x0C +#define CLKCTL_CACRR 0x10 +#define CLKCTL_CBCDR 0x14 +#define CLKCTL_CBCMR 0x18 +#define CLKCTL_CSCMR1 0x1C +#define CLKCTL_CSCMR2 0x20 +#define CLKCTL_CSCDR1 0x24 +#define CLKCTL_CS1CDR 0x28 +#define CLKCTL_CS2CDR 0x2C +#define CLKCTL_CDCDR 0x30 +#define CLKCTL_CHSCCDR 0x34 +#define CLKCTL_CSCDR2 0x38 +#define CLKCTL_CSCDR3 0x3C +#define CLKCTL_CSCDR4 0x40 +#define CLKCTL_CWDR 0x44 +#define CLKCTL_CDHIPR 0x48 +#define CLKCTL_CDCR 0x4C +#define CLKCTL_CTOR 0x50 +#define CLKCTL_CLPCR 0x54 +#define CLKCTL_CISR 0x58 +#define CLKCTL_CIMR 0x5C +#define CLKCTL_CCOSR 0x60 +#define CLKCTL_CGPR 0x64 +#define CLKCTL_CCGR0 0x68 +#define CLKCTL_CCGR1 0x6C +#define CLKCTL_CCGR2 0x70 +#define CLKCTL_CCGR3 0x74 +#define CLKCTL_CCGR4 0x78 +#define CLKCTL_CCGR5 0x7C +#define CLKCTL_CCGR6 0x80 +#define CLKCTL_CMEOR 0x84 + +/* DPLL */ +#define PLL_DP_CTL 0x00 +#define PLL_DP_CONFIG 0x04 +#define PLL_DP_OP 0x08 +#define PLL_DP_MFD 0x0C +#define PLL_DP_MFN 0x10 +#define PLL_DP_MFNMINUS 0x14 +#define PLL_DP_MFNPLUS 0x18 +#define PLL_DP_HFS_OP 0x1C +#define PLL_DP_HFS_MFD 0x20 +#define PLL_DP_HFS_MFN 0x24 +#define PLL_DP_TOGC 0x28 +#define PLL_DP_DESTAT 0x2C + +/* Assuming 24MHz input clock with doubler ON */ +/* MFI PDF */ +#define DP_OP_850 ((8 << 4) + ((1 - 1) << 0)) +#define DP_MFD_850 (48 - 1) +#define DP_MFN_850 41 + +#define DP_OP_800 ((8 << 4) + ((1 - 1) << 0)) +#define DP_MFD_800 (3 - 1) +#define DP_MFN_800 1 + +#define DP_OP_700 ((7 << 4) + ((1 - 1) << 0)) +#define DP_MFD_700 (24 - 1) +#define DP_MFN_700 7 + +#define DP_OP_665 ((6 << 4) + ((1 - 1) << 0)) +#define DP_MFD_665 (96 - 1) +#define DP_MFN_665 89 + +#define DP_OP_532 ((5 << 4) + ((1 - 1) << 0)) +#define DP_MFD_532 (24 - 1) +#define DP_MFN_532 13 + +#define DP_OP_400 ((8 << 4) + ((2 - 1) << 0)) +#define DP_MFD_400 (3 - 1) +#define DP_MFN_400 1 + +#define DP_OP_216 ((6 << 4) + ((3 - 1) << 0)) +#define DP_MFD_216 (4 - 1) +#define DP_MFN_216 3 + +#define CHIP_REV_1_0 0x10 +#define CHIP_REV_1_1 0x11 +#define CHIP_REV_2_0 0x20 +#define CHIP_REV_2_5 0x120 + +#define BOARD_REV_1_0 0x0 +#define BOARD_REV_2_0 0x1 + +#ifndef __ASSEMBLER__ + +enum mxc_clock { +MXC_ARM_CLK = 0, +MXC_AHB_CLK, +MXC_IPG_CLK, +MXC_IPG_PERCLK, +MXC_UART_CLK, +MXC_CSPI_CLK, +MXC_FEC_CLK, +}; + +extern unsigned int mxc_get_clock(enum mxc_clock clk); +extern unsigned int get_board_rev(void); +extern int is_soc_rev(int rev); + +#endif /* __ASSEMBLER__*/ + +#endif /* __ASM_ARCH_MXC_MX51_H__ */ diff --git a/include/asm-arm/arch-mx51/mx51_pins.h b/include/asm-arm/arch-mx51/mx51_pins.h new file mode 100644 index 0000000..63fdd8c --- /dev/null +++ b/include/asm-arm/arch-mx51/mx51_pins.h @@ -0,0 +1,370 @@ +/* + * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#ifndef __ASM_ARCH_MXC_MX51_PINS_H__ +#define __ASM_ARCH_MXC_MX51_PINS_H__ + +/*! + * @file arch-mxc/mx51_pins.h + * + * @brief MX51 I/O Pin List + * + * @ingroup GPIO_MX51 + */ + +#ifndef __ASSEMBLY__ + +/*! + * @name IOMUX/PAD Bit field definitions + */ + +/*! @{ */ + +/*! + * In order to identify pins more effectively, each mux-controlled pin's + * enumerated value is constructed in the following way: + * + * ------------------------------------------------------------------- + * 31-29 | 28 - 24 | 23 - 21 | 20 - 10| 9 - 0 + * ------------------------------------------------------------------- + * IO_P | IO_I | GPIO_I | PAD_I | MUX_I + * ------------------------------------------------------------------- + * + * Bit 0 to 9 contains MUX_I used to identify the register + * offset (0-based. base is IOMUX_module_base) defined in the Section + * "sw_pad_ctl & sw_mux_ctl details" of the IC Spec. The + * similar field definitions are used for the pad control register. + * For example, the MX51_PIN_ETM_D0 is defined in the enumeration: + * ( (0x28 - MUX_I_START) << MUX_I)|( (0x250 - PAD_I_START) << PAD_I) + * It means the mux control register is at register offset 0x28. The pad control + * register offset is: 0x250 and also occupy the least significant bits + * within the register. + */ + +/*! + * Starting bit position within each entry of \b iomux_pins to represent the + * MUX control register offset + */ +#define MUX_I 0 +/*! + * Starting bit position within each entry of \b iomux_pins to represent the + * PAD control register offset + */ +#define PAD_I 10 +/*! + * Starting bit position within each entry of \b iomux_pins to represent which + * mux mode is for GPIO (0-based) + */ +#define GPIO_I 21 + +#define MUX_IO_P 29 +#define MUX_IO_I 24 +#define IOMUX_TO_GPIO(pin) ((((unsigned int)pin >> MUX_IO_P) * \ + GPIO_NUM_PIN) + ((pin >> MUX_IO_I) &\ + ((1 << (MUX_IO_P - MUX_IO_I)) - 1))) +#define IOMUX_TO_IRQ(pin) (MXC_GPIO_INT_BASE + IOMUX_TO_GPIO(pin)) +#define GPIO_TO_PORT(n) (n / GPIO_NUM_PIN) +#define GPIO_TO_INDEX(n) (n % GPIO_NUM_PIN) + +#define NON_GPIO_PORT 0x7 +#define PIN_TO_MUX_MASK ((1 << (PAD_I - MUX_I)) - 1) +#define PIN_TO_PAD_MASK ((1 << (GPIO_I - PAD_I)) - 1) +#define PIN_TO_ALT_GPIO_MASK ((1 << (MUX_IO_I - GPIO_I)) - 1) + +#define NON_MUX_I PIN_TO_MUX_MASK +#define MUX_I_START 0x001C +#define PAD_I_START 0x3F0 +#define INPUT_CTL_START 0x8C4 +#define INPUT_CTL_START_TO1 0x928 +#define MUX_I_END (PAD_I_START - 4) + +#define _MXC_BUILD_PIN(gp, gi, ga, mi, pi) \ + (((gp) << MUX_IO_P) | ((gi) << MUX_IO_I) | \ + ((mi) << MUX_I) | \ + ((pi - PAD_I_START) << PAD_I) | \ + ((ga) << GPIO_I)) + +#define _MXC_BUILD_GPIO_PIN(gp, gi, ga, mi, pi) \ + _MXC_BUILD_PIN(gp, gi, ga, mi, pi) + +#define _MXC_BUILD_NON_GPIO_PIN(mi, pi) \ + _MXC_BUILD_PIN(NON_GPIO_PORT, 0, 0, mi, pi) + +#define PIN_TO_IOMUX_MUX(pin) ((pin >> MUX_I) & PIN_TO_MUX_MASK) +#define PIN_TO_IOMUX_PAD(pin) ((pin >> PAD_I) & PIN_TO_PAD_MASK) +#define PIN_TO_ALT_GPIO(pin) ((pin >> GPIO_I) & PIN_TO_ALT_GPIO_MASK) +#define PIN_TO_IOMUX_INDEX(pin) (PIN_TO_IOMUX_MUX(pin) >> 2) + +/*! @} End IOMUX/PAD Bit field definitions */ + +/*! + * This enumeration is constructed based on the Section + * "sw_pad_ctl & sw_mux_ctl details" of the MX51 IC Spec. Each enumerated + * value is constructed based on the rules described above. + */ +enum iomux_pins { + MX51_PIN_EIM_DA0 = _MXC_BUILD_NON_GPIO_PIN(0x1C, 0x7A8), + MX51_PIN_EIM_DA1 = _MXC_BUILD_NON_GPIO_PIN(0x20, 0x7A8), + MX51_PIN_EIM_DA2 = _MXC_BUILD_NON_GPIO_PIN(0x24, 0x7A8), + MX51_PIN_EIM_DA3 = _MXC_BUILD_NON_GPIO_PIN(0x28, 0x7A8), + MX51_PIN_EIM_DA4 = _MXC_BUILD_NON_GPIO_PIN(0x2C, 0x7AC), + MX51_PIN_EIM_DA5 = _MXC_BUILD_NON_GPIO_PIN(0x30, 0x7AC), + MX51_PIN_EIM_DA6 = _MXC_BUILD_NON_GPIO_PIN(0x34, 0x7AC), + MX51_PIN_EIM_DA7 = _MXC_BUILD_NON_GPIO_PIN(0x38, 0x7AC), + MX51_PIN_EIM_DA8 = _MXC_BUILD_NON_GPIO_PIN(0x3C, 0x7B0), + MX51_PIN_EIM_DA9 = _MXC_BUILD_NON_GPIO_PIN(0x40, 0x7B0), + MX51_PIN_EIM_DA10 = _MXC_BUILD_NON_GPIO_PIN(0x44, 0x7B0), + MX51_PIN_EIM_DA11 = _MXC_BUILD_NON_GPIO_PIN(0x48, 0x7B0), + MX51_PIN_EIM_DA12 = _MXC_BUILD_NON_GPIO_PIN(0x4C, 0x7BC), + MX51_PIN_EIM_DA13 = _MXC_BUILD_NON_GPIO_PIN(0x50, 0x7BC), + MX51_PIN_EIM_DA14 = _MXC_BUILD_NON_GPIO_PIN(0x54, 0x7BC), + MX51_PIN_EIM_DA15 = _MXC_BUILD_NON_GPIO_PIN(0x58, 0x7BC), + MX51_PIN_EIM_D16 = _MXC_BUILD_GPIO_PIN(1, 0, 1, 0x5C, 0x3F0), + MX51_PIN_EIM_D17 = _MXC_BUILD_GPIO_PIN(1, 1, 1, 0x60, 0x3F4), + MX51_PIN_EIM_D18 = _MXC_BUILD_GPIO_PIN(1, 2, 1, 0x64, 0x3F8), + MX51_PIN_EIM_D19 = _MXC_BUILD_GPIO_PIN(1, 3, 1, 0x68, 0x3FC), + MX51_PIN_EIM_D20 = _MXC_BUILD_GPIO_PIN(1, 4, 1, 0x6C, 0x400), + MX51_PIN_EIM_D21 = _MXC_BUILD_GPIO_PIN(1, 5, 1, 0x70, 0x404), + MX51_PIN_EIM_D22 = _MXC_BUILD_GPIO_PIN(1, 6, 1, 0x74, 0x408), + MX51_PIN_EIM_D23 = _MXC_BUILD_GPIO_PIN(1, 7, 1, 0x78, 0x40C), + MX51_PIN_EIM_D24 = _MXC_BUILD_GPIO_PIN(1, 8, 1, 0x7C, 0x410), + MX51_PIN_EIM_D25 = _MXC_BUILD_NON_GPIO_PIN(0x80, 0x414), + MX51_PIN_EIM_D26 = _MXC_BUILD_NON_GPIO_PIN(0x84, 0x418), + MX51_PIN_EIM_D27 = _MXC_BUILD_GPIO_PIN(1, 9, 1, 0x88, 0x41C), + MX51_PIN_EIM_D28 = _MXC_BUILD_NON_GPIO_PIN(0x8C, 0x420), + MX51_PIN_EIM_D29 = _MXC_BUILD_NON_GPIO_PIN(0x90, 0x424), + MX51_PIN_EIM_D30 = _MXC_BUILD_NON_GPIO_PIN(0x94, 0x428), + MX51_PIN_EIM_D31 = _MXC_BUILD_NON_GPIO_PIN(0x98, 0x42C), + MX51_PIN_EIM_A16 = _MXC_BUILD_GPIO_PIN(1, 10, 1, 0x9C, 0x430), + MX51_PIN_EIM_A17 = _MXC_BUILD_GPIO_PIN(1, 11, 1, 0xA0, 0x434), + MX51_PIN_EIM_A18 = _MXC_BUILD_GPIO_PIN(1, 12, 1, 0xA4, 0x438), + MX51_PIN_EIM_A19 = _MXC_BUILD_GPIO_PIN(1, 13, 1, 0xA8, 0x43C), + MX51_PIN_EIM_A20 = _MXC_BUILD_GPIO_PIN(1, 14, 1, 0xAC, 0x440), + MX51_PIN_EIM_A21 = _MXC_BUILD_GPIO_PIN(1, 15, 1, 0xB0, 0x444), + MX51_PIN_EIM_A22 = _MXC_BUILD_GPIO_PIN(1, 16, 1, 0xB4, 0x448), + MX51_PIN_EIM_A23 = _MXC_BUILD_GPIO_PIN(1, 17, 1, 0xB8, 0x44C), + MX51_PIN_EIM_A24 = _MXC_BUILD_GPIO_PIN(1, 18, 1, 0xBC, 0x450), + MX51_PIN_EIM_A25 = _MXC_BUILD_GPIO_PIN(1, 19, 1, 0xC0, 0x454), + MX51_PIN_EIM_A26 = _MXC_BUILD_GPIO_PIN(1, 20, 1, 0xC4, 0x458), + MX51_PIN_EIM_A27 = _MXC_BUILD_GPIO_PIN(1, 21, 1, 0xC8, 0x45C), + MX51_PIN_EIM_EB0 = _MXC_BUILD_NON_GPIO_PIN(0xCC, 0x460), + MX51_PIN_EIM_EB1 = _MXC_BUILD_NON_GPIO_PIN(0xD0, 0x464), + MX51_PIN_EIM_EB2 = _MXC_BUILD_GPIO_PIN(1, 22, 1, 0xD4, 0x468), + MX51_PIN_EIM_EB3 = _MXC_BUILD_GPIO_PIN(1, 23, 1, 0xD8, 0x46C), + MX51_PIN_EIM_OE = _MXC_BUILD_GPIO_PIN(1, 24, 1, 0xDC, 0x470), + MX51_PIN_EIM_CS0 = _MXC_BUILD_GPIO_PIN(1, 25, 1, 0xE0, 0x474), + MX51_PIN_EIM_CS1 = _MXC_BUILD_GPIO_PIN(1, 26, 1, 0xE4, 0x478), + MX51_PIN_EIM_CS2 = _MXC_BUILD_GPIO_PIN(1, 27, 1, 0xE8, 0x47C), + MX51_PIN_EIM_CS3 = _MXC_BUILD_GPIO_PIN(1, 28, 1, 0xEC, 0x480), + MX51_PIN_EIM_CS4 = _MXC_BUILD_GPIO_PIN(1, 29, 1, 0xF0, 0x484), + MX51_PIN_EIM_CS5 = _MXC_BUILD_GPIO_PIN(1, 30, 1, 0xF4, 0x488), + MX51_PIN_EIM_DTACK = _MXC_BUILD_GPIO_PIN(1, 31, 1, 0xF8, 0x48C), + MX51_PIN_EIM_LBA = _MXC_BUILD_GPIO_PIN(2, 1, 1, 0xFC, 0x494), + MX51_PIN_EIM_CRE = _MXC_BUILD_GPIO_PIN(2, 2, 1, 0x100, 0x4A0), + MX51_PIN_DRAM_CS1 = _MXC_BUILD_NON_GPIO_PIN(0x104, 0x4D0), + MX51_PIN_NANDF_WE_B = _MXC_BUILD_GPIO_PIN(2, 3, 3, 0x108, 0x4E4), + MX51_PIN_NANDF_RE_B = _MXC_BUILD_GPIO_PIN(2, 4, 3, 0x10C, 0x4E8), + MX51_PIN_NANDF_ALE = _MXC_BUILD_GPIO_PIN(2, 5, 3, 0x110, 0x4EC), + MX51_PIN_NANDF_CLE = _MXC_BUILD_GPIO_PIN(2, 6, 3, 0x114, 0x4F0), + MX51_PIN_NANDF_WP_B = _MXC_BUILD_GPIO_PIN(2, 7, 3, 0x118, 0x4F4), + MX51_PIN_NANDF_RB0 = _MXC_BUILD_GPIO_PIN(2, 8, 3, 0x11C, 0x4F8), + MX51_PIN_NANDF_RB1 = _MXC_BUILD_GPIO_PIN(2, 9, 3, 0x120, 0x4FC), + MX51_PIN_NANDF_RB2 = _MXC_BUILD_GPIO_PIN(2, 10, 3, 0x124, 0x500), + MX51_PIN_NANDF_RB3 = _MXC_BUILD_GPIO_PIN(2, 11, 3, 0x128, 0x504), + MX51_PIN_GPIO_NAND = _MXC_BUILD_GPIO_PIN(2, 12, 3, 0x12C, 0x514), + MX51_PIN_NANDF_RB4 = MX51_PIN_GPIO_NAND, + MX51_PIN_NANDF_RB5 = _MXC_BUILD_GPIO_PIN(2, 13, 3, 0x130, 0x5D8), + MX51_PIN_NANDF_RB6 = _MXC_BUILD_GPIO_PIN(2, 14, 3, 0x134, 0x5DC), + MX51_PIN_NANDF_RB7 = _MXC_BUILD_GPIO_PIN(2, 15, 3, 0x138, 0x5E0), + MX51_PIN_NANDF_CS0 = _MXC_BUILD_GPIO_PIN(2, 16, 3, 0x130, 0x518), + MX51_PIN_NANDF_CS1 = _MXC_BUILD_GPIO_PIN(2, 17, 3, 0x134, 0x51C), + MX51_PIN_NANDF_CS2 = _MXC_BUILD_GPIO_PIN(2, 18, 3, 0x138, 0x520), + MX51_PIN_NANDF_CS3 = _MXC_BUILD_GPIO_PIN(2, 19, 3, 0x13C, 0x524), + MX51_PIN_NANDF_CS4 = _MXC_BUILD_GPIO_PIN(2, 20, 3, 0x140, 0x528), + MX51_PIN_NANDF_CS5 = _MXC_BUILD_GPIO_PIN(2, 21, 3, 0x144, 0x52C), + MX51_PIN_NANDF_CS6 = _MXC_BUILD_GPIO_PIN(2, 22, 3, 0x148, 0x530), + MX51_PIN_NANDF_CS7 = _MXC_BUILD_GPIO_PIN(2, 23, 3, 0x14C, 0x534), + MX51_PIN_NANDF_RDY_INT = _MXC_BUILD_GPIO_PIN(2, 24, 3, 0x150, 0x538), + MX51_PIN_NANDF_D15 = _MXC_BUILD_GPIO_PIN(2, 25, 3, 0x154, 0x53C), + MX51_PIN_NANDF_D14 = _MXC_BUILD_GPIO_PIN(2, 26, 3, 0x158, 0x540), + MX51_PIN_NANDF_D13 = _MXC_BUILD_GPIO_PIN(2, 27, 3, 0x15C, 0x544), + MX51_PIN_NANDF_D12 = _MXC_BUILD_GPIO_PIN(2, 28, 3, 0x160, 0x548), + MX51_PIN_NANDF_D11 = _MXC_BUILD_GPIO_PIN(2, 29, 3, 0x164, 0x54C), + MX51_PIN_NANDF_D10 = _MXC_BUILD_GPIO_PIN(2, 30, 3, 0x168, 0x550), + MX51_PIN_NANDF_D9 = _MXC_BUILD_GPIO_PIN(2, 31, 3, 0x16C, 0x554), + MX51_PIN_NANDF_D8 = _MXC_BUILD_GPIO_PIN(3, 0, 3, 0x170, 0x558), + MX51_PIN_NANDF_D7 = _MXC_BUILD_GPIO_PIN(3, 1, 3, 0x174, 0x55C), + MX51_PIN_NANDF_D6 = _MXC_BUILD_GPIO_PIN(3, 2, 3, 0x178, 0x560), + MX51_PIN_NANDF_D5 = _MXC_BUILD_GPIO_PIN(3, 3, 3, 0x17C, 0x564), + MX51_PIN_NANDF_D4 = _MXC_BUILD_GPIO_PIN(3, 4, 3, 0x180, 0x568), + MX51_PIN_NANDF_D3 = _MXC_BUILD_GPIO_PIN(3, 5, 3, 0x184, 0x56C), + MX51_PIN_NANDF_D2 = _MXC_BUILD_GPIO_PIN(3, 6, 3, 0x188, 0x570), + MX51_PIN_NANDF_D1 = _MXC_BUILD_GPIO_PIN(3, 7, 3, 0x18C, 0x574), + MX51_PIN_NANDF_D0 = _MXC_BUILD_GPIO_PIN(3, 8, 3, 0x190, 0x578), + MX51_PIN_CSI1_D8 = _MXC_BUILD_GPIO_PIN(2, 12, 3, 0x194, 0x57C), + MX51_PIN_CSI1_D9 = _MXC_BUILD_GPIO_PIN(2, 13, 3, 0x198, 0x580), + MX51_PIN_CSI1_D10 = _MXC_BUILD_NON_GPIO_PIN(0x19C, 0x584), + MX51_PIN_CSI1_D11 = _MXC_BUILD_NON_GPIO_PIN(0x1A0, 0x588), + MX51_PIN_CSI1_D12 = _MXC_BUILD_NON_GPIO_PIN(0x1A4, 0x58C), + MX51_PIN_CSI1_D13 = _MXC_BUILD_NON_GPIO_PIN(0x1A8, 0x590), + MX51_PIN_CSI1_D14 = _MXC_BUILD_NON_GPIO_PIN(0x1AC, 0x594), + MX51_PIN_CSI1_D15 = _MXC_BUILD_NON_GPIO_PIN(0x1B0, 0x598), + MX51_PIN_CSI1_D16 = _MXC_BUILD_NON_GPIO_PIN(0x1B4, 0x59C), + MX51_PIN_CSI1_D17 = _MXC_BUILD_NON_GPIO_PIN(0x1B8, 0x5A0), + MX51_PIN_CSI1_D18 = _MXC_BUILD_NON_GPIO_PIN(0x1BC, 0x5A4), + MX51_PIN_CSI1_D19 = _MXC_BUILD_NON_GPIO_PIN(0x1C0, 0x5A8), + MX51_PIN_CSI1_VSYNC = _MXC_BUILD_NON_GPIO_PIN(0x1C4, 0x5AC), + MX51_PIN_CSI1_HSYNC = _MXC_BUILD_NON_GPIO_PIN(0x1C8, 0x5B0), + MX51_PIN_CSI1_PIXCLK = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x5B4), + MX51_PIN_CSI1_MCLK = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x5B8), + MX51_PIN_CSI1_PKE0 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x860), + MX51_PIN_CSI2_D12 = _MXC_BUILD_GPIO_PIN(3, 9, 3, 0x1CC, 0x5BC), + MX51_PIN_CSI2_D13 = _MXC_BUILD_GPIO_PIN(3, 10, 3, 0x1D0, 0x5C0), + MX51_PIN_CSI2_D14 = _MXC_BUILD_GPIO_PIN(3, 11, 3, 0x1D4, 0x5C4), + MX51_PIN_CSI2_D15 = _MXC_BUILD_GPIO_PIN(3, 12, 3, 0x1D8, 0x5C8), + MX51_PIN_CSI2_D16 = _MXC_BUILD_GPIO_PIN(3, 11, 3, 0x1DC, 0x5CC), + MX51_PIN_CSI2_D17 = _MXC_BUILD_GPIO_PIN(3, 12, 3, 0x1E0, 0x5D0), + MX51_PIN_CSI2_D18 = _MXC_BUILD_GPIO_PIN(3, 11, 3, 0x1E4, 0x5D4), + MX51_PIN_CSI2_D19 = _MXC_BUILD_GPIO_PIN(3, 12, 3, 0x1E8, 0x5D8), + MX51_PIN_CSI2_VSYNC = _MXC_BUILD_GPIO_PIN(3, 13, 3, 0x1EC, 0x5DC), + MX51_PIN_CSI2_HSYNC = _MXC_BUILD_GPIO_PIN(3, 14, 3, 0x1F0, 0x5E0), + MX51_PIN_CSI2_PIXCLK = _MXC_BUILD_GPIO_PIN(3, 15, 3, 0x1F4, 0x5E4), + MX51_PIN_CSI2_PKE0 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x81C), + MX51_PIN_I2C1_CLK = _MXC_BUILD_GPIO_PIN(3, 16, 3, 0x1F8, 0x5E8), + MX51_PIN_I2C1_DAT = _MXC_BUILD_GPIO_PIN(3, 17, 3, 0x1FC, 0x5EC), + MX51_PIN_AUD3_BB_TXD = _MXC_BUILD_GPIO_PIN(3, 18, 3, 0x200, 0x5F0), + MX51_PIN_AUD3_BB_RXD = _MXC_BUILD_GPIO_PIN(3, 19, 3, 0x204, 0x5F4), + MX51_PIN_AUD3_BB_CK = _MXC_BUILD_GPIO_PIN(3, 20, 3, 0x208, 0x5F8), + MX51_PIN_AUD3_BB_FS = _MXC_BUILD_GPIO_PIN(3, 21, 3, 0x20C, 0x5FC), + MX51_PIN_CSPI1_MOSI = _MXC_BUILD_GPIO_PIN(3, 22, 3, 0x210, 0x600), + MX51_PIN_CSPI1_MISO = _MXC_BUILD_GPIO_PIN(3, 23, 3, 0x214, 0x604), + MX51_PIN_CSPI1_SS0 = _MXC_BUILD_GPIO_PIN(3, 24, 3, 0x218, 0x608), + MX51_PIN_CSPI1_SS1 = _MXC_BUILD_GPIO_PIN(3, 25, 3, 0x21C, 0x60C), + MX51_PIN_CSPI1_RDY = _MXC_BUILD_GPIO_PIN(3, 26, 3, 0x220, 0x610), + MX51_PIN_CSPI1_SCLK = _MXC_BUILD_GPIO_PIN(3, 27, 3, 0x224, 0x614), + MX51_PIN_UART1_RXD = _MXC_BUILD_GPIO_PIN(3, 28, 3, 0x228, 0x618), + MX51_PIN_UART1_TXD = _MXC_BUILD_GPIO_PIN(3, 29, 3, 0x22C, 0x61C), + MX51_PIN_UART1_RTS = _MXC_BUILD_GPIO_PIN(3, 30, 3, 0x230, 0x620), + MX51_PIN_UART1_CTS = _MXC_BUILD_GPIO_PIN(3, 31, 3, 0x234, 0x624), + MX51_PIN_UART2_RXD = _MXC_BUILD_GPIO_PIN(0, 20, 3, 0x238, 0x628), + MX51_PIN_UART2_TXD = _MXC_BUILD_GPIO_PIN(0, 21, 3, 0x23C, 0x62C), + MX51_PIN_UART3_RXD = _MXC_BUILD_GPIO_PIN(0, 22, 3, 0x240, 0x630), + MX51_PIN_UART3_TXD = _MXC_BUILD_GPIO_PIN(0, 23, 3, 0x244, 0x634), + MX51_PIN_OWIRE_LINE = _MXC_BUILD_GPIO_PIN(0, 24, 3, 0x248, 0x638), + MX51_PIN_KEY_ROW0 = _MXC_BUILD_NON_GPIO_PIN(0x24C, 0x63C), + MX51_PIN_KEY_ROW1 = _MXC_BUILD_NON_GPIO_PIN(0x250, 0x640), + MX51_PIN_KEY_ROW2 = _MXC_BUILD_NON_GPIO_PIN(0x254, 0x644), + MX51_PIN_KEY_ROW3 = _MXC_BUILD_NON_GPIO_PIN(0x258, 0x648), + MX51_PIN_KEY_COL0 = _MXC_BUILD_NON_GPIO_PIN(0x25C, 0x64C), + MX51_PIN_KEY_COL1 = _MXC_BUILD_NON_GPIO_PIN(0x260, 0x650), + MX51_PIN_KEY_COL2 = _MXC_BUILD_NON_GPIO_PIN(0x264, 0x654), + MX51_PIN_KEY_COL3 = _MXC_BUILD_NON_GPIO_PIN(0x268, 0x658), + MX51_PIN_KEY_COL4 = _MXC_BUILD_NON_GPIO_PIN(0x26C, 0x65C), + MX51_PIN_KEY_COL5 = _MXC_BUILD_NON_GPIO_PIN(0x270, 0x660), + MX51_PIN_USBH1_CLK = _MXC_BUILD_GPIO_PIN(0, 25, 2, 0x278, 0x678), + MX51_PIN_USBH1_DIR = _MXC_BUILD_GPIO_PIN(0, 26, 2, 0x27C, 0x67C), + MX51_PIN_USBH1_STP = _MXC_BUILD_GPIO_PIN(0, 27, 2, 0x280, 0x680), + MX51_PIN_USBH1_NXT = _MXC_BUILD_GPIO_PIN(0, 28, 2, 0x284, 0x684), + MX51_PIN_USBH1_DATA0 = _MXC_BUILD_GPIO_PIN(0, 11, 2, 0x288, 0x688), + MX51_PIN_USBH1_DATA1 = _MXC_BUILD_GPIO_PIN(0, 12, 2, 0x28C, 0x68C), + MX51_PIN_USBH1_DATA2 = _MXC_BUILD_GPIO_PIN(0, 13, 2, 0x290, 0x690), + MX51_PIN_USBH1_DATA3 = _MXC_BUILD_GPIO_PIN(0, 14, 2, 0x294, 0x694), + MX51_PIN_USBH1_DATA4 = _MXC_BUILD_GPIO_PIN(0, 15, 2, 0x298, 0x698), + MX51_PIN_USBH1_DATA5 = _MXC_BUILD_GPIO_PIN(0, 16, 2, 0x29C, 0x69C), + MX51_PIN_USBH1_DATA6 = _MXC_BUILD_GPIO_PIN(0, 17, 2, 0x2A0, 0x6A0), + MX51_PIN_USBH1_DATA7 = _MXC_BUILD_GPIO_PIN(0, 18, 2, 0x2A4, 0x6A4), + MX51_PIN_DI1_PIN11 = _MXC_BUILD_GPIO_PIN(2, 0, 4, 0x2A8, 0x6A8), + MX51_PIN_DI1_PIN12 = _MXC_BUILD_GPIO_PIN(2, 1, 4, 0x2AC, 0x6AC), + MX51_PIN_DI1_PIN13 = _MXC_BUILD_GPIO_PIN(2, 2, 4, 0x2B0, 0x6B0), + MX51_PIN_DI1_D0_CS = _MXC_BUILD_GPIO_PIN(2, 3, 4, 0x2B4, 0x6B4), + MX51_PIN_DI1_D1_CS = _MXC_BUILD_GPIO_PIN(2, 4, 4, 0x2B8, 0x6B8), + MX51_PIN_DISPB2_SER_DIN = _MXC_BUILD_GPIO_PIN(2, 5, 4, 0x2BC, 0x6BC), + MX51_PIN_DISPB2_SER_DIO = _MXC_BUILD_GPIO_PIN(2, 6, 4, 0x2C0, 0x6C0), + MX51_PIN_DISPB2_SER_CLK = _MXC_BUILD_GPIO_PIN(2, 7, 4, 0x2C4, 0x6C4), + MX51_PIN_DISPB2_SER_RS = _MXC_BUILD_GPIO_PIN(2, 8, 4, 0x2C8, 0x6C8), + MX51_PIN_DISP1_DAT0 = _MXC_BUILD_NON_GPIO_PIN(0x2CC, 0x6CC), + MX51_PIN_DISP1_DAT1 = _MXC_BUILD_NON_GPIO_PIN(0x2D0, 0x6D0), + MX51_PIN_DISP1_DAT2 = _MXC_BUILD_NON_GPIO_PIN(0x2D4, 0x6D4), + MX51_PIN_DISP1_DAT3 = _MXC_BUILD_NON_GPIO_PIN(0x2D8, 0x6D8), + MX51_PIN_DISP1_DAT4 = _MXC_BUILD_NON_GPIO_PIN(0x2DC, 0x6DC), + MX51_PIN_DISP1_DAT5 = _MXC_BUILD_NON_GPIO_PIN(0x2E0, 0x6E0), + MX51_PIN_DISP1_DAT6 = _MXC_BUILD_NON_GPIO_PIN(0x2E4, 0x6E4), + MX51_PIN_DISP1_DAT7 = _MXC_BUILD_NON_GPIO_PIN(0x2E8, 0x6E8), + MX51_PIN_DISP1_DAT8 = _MXC_BUILD_NON_GPIO_PIN(0x2EC, 0x6EC), + MX51_PIN_DISP1_DAT9 = _MXC_BUILD_NON_GPIO_PIN(0x2F0, 0x6F0), + MX51_PIN_DISP1_DAT10 = _MXC_BUILD_NON_GPIO_PIN(0x2F4, 0x6F4), + MX51_PIN_DISP1_DAT11 = _MXC_BUILD_NON_GPIO_PIN(0x2F8, 0x6F8), + MX51_PIN_DISP1_DAT12 = _MXC_BUILD_NON_GPIO_PIN(0x2FC, 0x6FC), + MX51_PIN_DISP1_DAT13 = _MXC_BUILD_NON_GPIO_PIN(0x300, 0x700), + MX51_PIN_DISP1_DAT14 = _MXC_BUILD_NON_GPIO_PIN(0x304, 0x704), + MX51_PIN_DISP1_DAT15 = _MXC_BUILD_NON_GPIO_PIN(0x308, 0x708), + MX51_PIN_DISP1_DAT16 = _MXC_BUILD_NON_GPIO_PIN(0x30C, 0x70C), + MX51_PIN_DISP1_DAT17 = _MXC_BUILD_NON_GPIO_PIN(0x310, 0x710), + MX51_PIN_DISP1_DAT18 = _MXC_BUILD_NON_GPIO_PIN(0x314, 0x714), + MX51_PIN_DISP1_DAT19 = _MXC_BUILD_NON_GPIO_PIN(0x318, 0x718), + MX51_PIN_DISP1_DAT20 = _MXC_BUILD_NON_GPIO_PIN(0x31C, 0x71C), + MX51_PIN_DISP1_DAT21 = _MXC_BUILD_NON_GPIO_PIN(0x320, 0x720), + MX51_PIN_DISP1_DAT22 = _MXC_BUILD_NON_GPIO_PIN(0x324, 0x724), + MX51_PIN_DISP1_DAT23 = _MXC_BUILD_NON_GPIO_PIN(0x328, 0x728), + MX51_PIN_DI1_PIN3 = _MXC_BUILD_NON_GPIO_PIN(0x32C, 0x72C), + MX51_PIN_DI1_PIN2 = _MXC_BUILD_NON_GPIO_PIN(0x330, 0x734), + MX51_PIN_DI_GP1 = _MXC_BUILD_NON_GPIO_PIN(0x334, 0x73C), + MX51_PIN_DI_GP2 = _MXC_BUILD_NON_GPIO_PIN(0x338, 0x740), + MX51_PIN_DI_GP3 = _MXC_BUILD_NON_GPIO_PIN(0x33C, 0x744), + MX51_PIN_DI2_PIN4 = _MXC_BUILD_NON_GPIO_PIN(0x340, 0x748), + MX51_PIN_DI2_PIN2 = _MXC_BUILD_NON_GPIO_PIN(0x344, 0x74C), + MX51_PIN_DI2_PIN3 = _MXC_BUILD_NON_GPIO_PIN(0x348, 0x750), + MX51_PIN_DI2_DISP_CLK = _MXC_BUILD_NON_GPIO_PIN(0x34C, 0x754), + MX51_PIN_DI_GP4 = _MXC_BUILD_NON_GPIO_PIN(0x350, 0x758), + MX51_PIN_DISP2_DAT0 = _MXC_BUILD_NON_GPIO_PIN(0x354, 0x75C), + MX51_PIN_DISP2_DAT1 = _MXC_BUILD_NON_GPIO_PIN(0x358, 0x760), + MX51_PIN_DISP2_DAT2 = _MXC_BUILD_NON_GPIO_PIN(0x35C, 0x764), + MX51_PIN_DISP2_DAT3 = _MXC_BUILD_NON_GPIO_PIN(0x360, 0x768), + MX51_PIN_DISP2_DAT4 = _MXC_BUILD_NON_GPIO_PIN(0x364, 0x76C), + MX51_PIN_DISP2_DAT5 = _MXC_BUILD_NON_GPIO_PIN(0x368, 0x770), + MX51_PIN_DISP2_DAT6 = _MXC_BUILD_GPIO_PIN(0, 19, 5, 0x36C, 0x774), + MX51_PIN_DISP2_DAT7 = _MXC_BUILD_GPIO_PIN(0, 29, 5, 0x370, 0x778), + MX51_PIN_DISP2_DAT8 = _MXC_BUILD_GPIO_PIN(0, 30, 5, 0x374, 0x77C), + MX51_PIN_DISP2_DAT9 = _MXC_BUILD_GPIO_PIN(0, 31, 5, 0x378, 0x780), + MX51_PIN_DISP2_DAT10 = _MXC_BUILD_NON_GPIO_PIN(0x37C, 0x784), + MX51_PIN_DISP2_DAT11 = _MXC_BUILD_NON_GPIO_PIN(0x380, 0x788), + MX51_PIN_DISP2_DAT12 = _MXC_BUILD_NON_GPIO_PIN(0x384, 0x78C), + MX51_PIN_DISP2_DAT13 = _MXC_BUILD_NON_GPIO_PIN(0x388, 0x790), + MX51_PIN_DISP2_DAT14 = _MXC_BUILD_NON_GPIO_PIN(0x38C, 0x794), + MX51_PIN_DISP2_DAT15 = _MXC_BUILD_NON_GPIO_PIN(0x390, 0x798), + MX51_PIN_SD1_CMD = _MXC_BUILD_NON_GPIO_PIN(0x394, 0x79C), + MX51_PIN_SD1_CLK = _MXC_BUILD_NON_GPIO_PIN(0x398, 0x7A0), + MX51_PIN_SD1_DATA0 = _MXC_BUILD_NON_GPIO_PIN(0x39C, 0x7A4), + MX51_PIN_SD1_DATA1 = _MXC_BUILD_NON_GPIO_PIN(0x3A0, 0x7A8), + MX51_PIN_SD1_DATA2 = _MXC_BUILD_NON_GPIO_PIN(0x3A4, 0x7AC), + MX51_PIN_SD1_DATA3 = _MXC_BUILD_NON_GPIO_PIN(0x3A8, 0x7B0), + MX51_PIN_GPIO1_0 = _MXC_BUILD_GPIO_PIN(0, 0, 1, 0x3AC, 0x7B4), + MX51_PIN_GPIO1_1 = _MXC_BUILD_GPIO_PIN(0, 1, 1, 0x3B0, 0x7B8), + MX51_PIN_SD2_CMD = _MXC_BUILD_NON_GPIO_PIN(0x3B4, 0x7BC), + MX51_PIN_SD2_CLK = _MXC_BUILD_NON_GPIO_PIN(0x3B8, 0x7C0), + MX51_PIN_SD2_DATA0 = _MXC_BUILD_NON_GPIO_PIN(0x3BC, 0x7C4), + MX51_PIN_SD2_DATA1 = _MXC_BUILD_NON_GPIO_PIN(0x3C0, 0x7C8), + MX51_PIN_SD2_DATA2 = _MXC_BUILD_NON_GPIO_PIN(0x3C4, 0x7CC), + MX51_PIN_SD2_DATA3 = _MXC_BUILD_NON_GPIO_PIN(0x3C8, 0x7D0), + MX51_PIN_GPIO1_2 = _MXC_BUILD_GPIO_PIN(0, 2, 0, 0x3CC, 0x7D4), + MX51_PIN_GPIO1_3 = _MXC_BUILD_GPIO_PIN(0, 3, 0, 0x3D0, 0x7D8), + MX51_PIN_PMIC_INT_REQ = _MXC_BUILD_NON_GPIO_PIN(0x3D4, 0x7FC), + MX51_PIN_GPIO1_4 = _MXC_BUILD_GPIO_PIN(0, 4, 0, 0x3D8, 0x804), + MX51_PIN_GPIO1_5 = _MXC_BUILD_GPIO_PIN(0, 5, 0, 0x3DC, 0x808), + MX51_PIN_GPIO1_6 = _MXC_BUILD_GPIO_PIN(0, 6, 0, 0x3E0, 0x80C), + MX51_PIN_GPIO1_7 = _MXC_BUILD_GPIO_PIN(0, 7, 0, 0x3E4, 0x810), + MX51_PIN_GPIO1_8 = _MXC_BUILD_GPIO_PIN(0, 8, 0, 0x3E8, 0x814), + MX51_PIN_GPIO1_9 = _MXC_BUILD_GPIO_PIN(0, 9, 0, 0x3EC, 0x818), +}; + +#endif /* __ASSEMBLY__ */ +#endif /* __ASM_ARCH_MXC_MX51_PINS_H__ */ diff --git a/include/configs/imx51.h b/include/configs/imx51.h new file mode 100644 index 0000000..f0def4e --- /dev/null +++ b/include/configs/imx51.h @@ -0,0 +1,177 @@ +/* + * Copyright (C) 2007, Guennadi Liakhovetski <lg(a)denx.de> + * + * (C) Copyright 2009 Freescale Semiconductor, Inc. + * + * Configuration settings for the MX51-3Stack Freescale board. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <asm/arch/mx51.h> + + /* High Level Configuration Options */ +#define CONFIG_ARMV7 1 /* This is armv7 Cortex-A8 CPU core */ +#define CONFIG_L2_OFF + +#define CONFIG_MXC 1 +#define CONFIG_MX51_BBG 1 /* in a mx51 */ +#define CONFIG_FLASH_HEADER 1 +#define CONFIG_FLASH_HEADER_OFFSET 0x400 +#define CONFIG_FLASH_HEADER_BARKER 0xB1 + +#define CONFIG_SKIP_RELOCATE_UBOOT + +#define CONFIG_MX51_HCLK_FREQ 24000000 +#define CONFIG_MX51_CLK32 32768 +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +#define BOARD_LATE_INIT +/* + * Disabled for now due to build problems under Debian and a significant + * increase in the final file size: 144260 vs. 109536 Bytes. + */ + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_REVISION_TAG 1 +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 + +/* + * Size of malloc() pool + */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024) +/* size in bytes reserved for initial data */ +#define CONFIG_SYS_GBL_DATA_SIZE 128 + +#define CONFIG_DOS_PARTITION 1 +/* + * Hardware drivers + */ +#define CONFIG_SERIAL UART1_BASE_ADDR + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} + +/*********************************************************** + * Command definition + ***********************************************************/ + +#undef CONFIG_CMD_IMLS + +#define CONFIG_BOOTDELAY 3 + +#define CONFIG_PRIME "FEC0" + +#define CONFIG_LOADADDR 0x90800000 /* loadaddr env var */ + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "ethprime=FEC0\0" \ + "uboot_addr=0xa0000000\0" \ + "uboot=u-boot.bin\0" \ + "kernel=uImage\0" \ + "bootargs_base=setenv bootargs console=ttymxc0,115200\0"\ + "bootargs_nfs=setenv bootargs ${bootargs} root=/dev/nfs "\ + "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0"\ + "bootcmd=run bootcmd_net\0" \ + "bootcmd_net=run bootargs_base bootargs_nfs; " \ + "tftpboot ${loadaddr} ${kernel}; bootm\0" \ + +/* + * The MX51 3stack board seems to have a hardware "peculiarity" confirmed under + * U-Boot, RedBoot and Linux: the ethernet Rx signal is reaching the CS8900A + * controller inverted. The controller is capable of detecting and correcting + * this, but it needs 4 network packets for that. Which means, at startup, you + * will not receive answers to the first 4 packest, unless there have been some + * broadcasts on the network, or your board is on a hub. Reducing the ARP + * timeout from default 5 seconds to 200ms we speed up the initial TFTP + * transfer, should the user wish one, significantly. + */ +#define CONFIG_ARP_TIMEOUT 200UL + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "BBG U-Boot > " +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ + +#define CONFIG_SYS_MEMTEST_START 0 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x10000 + +#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */ + +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR + +#define CONFIG_SYS_HZ CONFIG_MX51_CLK32/* use 32kHz clock as source */ + +#define CONFIG_CMDLINE_EDITING 1 + +/*----------------------------------------------------------------------- + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ + +/*----------------------------------------------------------------------- + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM_1 CSD0_BASE_ADDR +#define PHYS_SDRAM_1_SIZE (512 * 1024 * 1024) + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ +#define CONFIG_SYS_NO_FLASH + +/* Monitor at beginning of flash */ +#if defined(CONFIG_CMD_SF) + #define CONFIG_FSL_ENV_IN_SF +#elif defined(CONFIG_CMD_MMC) + #define CONFIG_FSL_ENV_IN_MMC +#endif + +#define CONFIG_ENV_SECT_SIZE (128 * 1024) +#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE + +#if defined(CONFIG_FSL_ENV_IN_MMC) + #define CONFIG_ENV_IS_IN_MMC 1 + #define CONFIG_ENV_OFFSET (768 * 1024) +#elif defined(CONFIG_FSL_ENV_IN_SF) + #define CONFIG_ENV_IS_IN_SPI_FLASH 1 + #define CONFIG_ENV_IS_EMBEDDED 1 + #define CONFIG_ENV_SPI_CS 1 + #define CONFIG_ENV_OFFSET (768 * 1024) +#else + #define CONFIG_ENV_IS_NOWHERE 1 +#endif + +#endif /* __CONFIG_H */ -- 1.6.0.4

3 2

[U-Boot] [PATCH] TI: DaVinci: DM646x: Update flag used to represent DM646x SOC's
by s-paulraj＠ti.com 21 Sep '09

21 Sep '09

From: Sandeep Paulraj <s-paulraj(a)ti.com> In the DaVinci specific code, we use both CONFIG_SOC_DM646X and CONFIG_SOC_DM646x to represent DM646x specific code. This patch changes occurrences of CONFIG_SOC_DM646x to CONFIG_SOC_DM646X. This is because for DM644x series of SOCs we use the flag CONFIG_SOC_DM644X. We want some uniformity. Signed-off-by: Sandeep Paulraj <s-paulraj(a)ti.com> --- include/asm-arm/arch-davinci/emac_defs.h | 4 ++-- include/asm-arm/arch-davinci/nand_defs.h | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/include/asm-arm/arch-davinci/emac_defs.h b/include/asm-arm/arch-davinci/emac_defs.h index ae75f84..96bc80e 100644 --- a/include/asm-arm/arch-davinci/emac_defs.h +++ b/include/asm-arm/arch-davinci/emac_defs.h @@ -50,7 +50,7 @@ #define EMAC_MDIO_BASE_ADDR (0x01c84000) #endif -#ifdef CONFIG_SOC_DM646x +#ifdef CONFIG_SOC_DM646X /* MDIO module input frequency */ #define EMAC_MDIO_BUS_FREQ 76500000 /* MDIO clock output frequency */ @@ -283,7 +283,7 @@ typedef struct { /* EMAC Wrapper Registers Structure */ typedef struct { -#if defined(CONFIG_SOC_DM646x) || defined(CONFIG_SOC_DM365) +#if defined(CONFIG_SOC_DM646X) || defined(CONFIG_SOC_DM365) dv_reg IDVER; dv_reg SOFTRST; dv_reg EMCTRL; diff --git a/include/asm-arm/arch-davinci/nand_defs.h b/include/asm-arm/arch-davinci/nand_defs.h index 386540e..10f3a39 100644 --- a/include/asm-arm/arch-davinci/nand_defs.h +++ b/include/asm-arm/arch-davinci/nand_defs.h @@ -28,7 +28,7 @@ #include <asm/arch/hardware.h> -#ifdef CONFIG_SOC_DM646x +#ifdef CONFIG_SOC_DM646X #define MASK_CLE 0x80000 #define MASK_ALE 0x40000 #else -- 1.6.0.4

3 2

[U-Boot] Executing uboot from FLASH
by Mike Breneman 21 Sep '09

21 Sep '09

Hello all, I am working with the AMCC PPC 405Ex. I will have very limited RAM on my production board, thus I would like u-boot to execute from FLASH rather than RAM. Has anyone else done this? I played with this a couple of days without much success. Is it do-able, without too much effort? Thanks, Mike

2 2

[U-Boot] RFC: split ARM repo and distribute workload
by Wolfgang Denk 21 Sep '09

21 Sep '09

Hello everybody, ARM has always been one of the architectures that generated a big number of different processors and SoCs, but recently the activitiy in this area is literally exploding. This is partially due to the fact that ARM is currently used in many designs, so many new ARM based processors and SoCs and even more new ARM boards show up, but another and at least as important change is that some silicon and board vendors have started to actively pushing their products into the U-Boot (and Linux) mainline source trees (and *welcome* they all are!). It has become evident that this growing complexity has become way too massive to be shouldered by a single custodian, even a very active one like Jean-Christophe. I think we have no other choice but to add more manpower to this task, i. e. split the ARM respository and distribute the workload across a few more custodians. Unline with the Power architecture, where the split can be easily defined by processor lines, with ARM it seems more logical to me to differentiate by silicon vendors. After much thinking I therefor suggest to implement the following change for the ARM architecture: master ARM repository: Tom Rix Atmel (AT91): Jean-Christophe Plagniol-Villard Freescale (i.MX) Magnus Lilja? Or are there any volunteers at Freescale? Marvell (PXA + IXP): Jean-Christophe Plagniol-Villard Marvell (all other): Prafulla Wadaskar Samsung (s3c, s5pc): Are there any volunteers at Samsung? Texas Instruments (OMAP): Dirk Behme? Or are there any volunteers at TI? ??? ??? Please let me know what you think about this idea, and if you agree with the suggested persons - resp. if you are one of these, if you would be willing to take such responsibility (be warned: it's a lot of work), and/or if you have other and/or additional ideas. We are not exactly in a hurry, but I think we should try and get this change implemented before the end of this merge window, so the stabilization period can already be handled by more people, thus hopefully with less stress on any of the (new) custodians. Thanks to all who helped so far, thanks to all who patiently suffered from delays and other friction, and thanks in advance to everybody who steps up to help. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd(a)denx.de The management question ... is not _whether_ to build a pilot system and throw it away. You _will_ do that. The only question is whether to plan in advance to build a throwaway, or to promise to deliver the throwaway to customers. - Fred Brooks, "The Mythical Man Month"

10 24

[U-Boot] [PATCH] MII Bus BitBang Imlementation for MPC85xx FCC ports
by Luigi 'Comio' Mantellini 21 Sep '09

21 Sep '09

From: Luigi 'Comio' Mantellini <luigi.mantellini(a)idf-hit.com> This patch add a MII Bus support for FCC port using a simple bitbang implementation (derived from miiphy driver). In order to enable mii bus, you need to define the following additional macros: CONFIG_MPC85XX_BITBANGMII - Enable the mii bus support code CONFIG_SYS_FCC1_MDIO - Pin used for MDIO signal CONFIG_SYS_FCC2_MDIO CONFIG_SYS_FCC3_MDIO CONFIG_SYS_FCC1_MDC - Pin used for MDC signal CONFIG_SYS_FCC2_MDC CONFIG_SYS_FCC3_MDC CONFIG_SYS_FCC1_PHYADDR - Phy address CONFIG_SYS_FCC2_PHYADDR CONFIG_SYS_FCC3_PHYADDR Notice that all Pins are refered to the Parallel IO Ports (A, B, C, D). The pin number is gived by the following formula: AbsIoPin# = (Port#) * 32 + IoPin# where: Port# is 0 for port A, 1 for port B, etc... IoPin# is the pin is a value from 0 to 31 refered to the port AbsIoPin# is the value request bt *_MDIO and *_MDC macros. Any feedback is welcome. best regards, luigi Luigi 'Comio' Mantellini (1): [OLT] Add MII bus implementation for FCC ports (using bitbanging) cpu/mpc85xx/ether_fcc.c | 400 ++++++++++++++++++++++++++++++++++++++++++++--- 1 files changed, 379 insertions(+), 21 deletions(-)

2 2

[U-Boot] [PATCH] Support for the OpenRD base board
by Simon Kagstrom 21 Sep '09

21 Sep '09

Support for the OpenRD base board The implementation is borrowed from the sheevaplug board and the Marvell 1.1.4 code and likely to be a bit incomplete. Signed-off-by: Simon Kagstrom <simon.kagstrom(a)netinsight.net> --- The configuration does not include UBIFS support, which still needs he remaining patches for the bitops cleanup and fixes: http://lists.denx.de/pipermail/u-boot/2009-August/059285.html to build. Until those are applied, it's turned off here. I get run-time problems when building for armv5te for OpenRD base (apparently the same problem occurs for other Kirkwood boards). This patch fixes that: http://lists.denx.de/pipermail/u-boot/2009-September/059896.html MAINTAINERS | 4 + MAKEALL | 1 + Makefile | 3 + board/Marvell/openrd_base/Makefile | 51 +++++++ board/Marvell/openrd_base/config.mk | 25 ++++ board/Marvell/openrd_base/openrd_base.c | 158 ++++++++++++++++++++++ board/Marvell/openrd_base/openrd_base.h | 46 +++++++ include/configs/openrd_base.h | 218 +++++++++++++++++++++++++++++++ 8 files changed, 506 insertions(+), 0 deletions(-) create mode 100644 board/Marvell/openrd_base/Makefile create mode 100644 board/Marvell/openrd_base/config.mk create mode 100644 board/Marvell/openrd_base/openrd_base.c create mode 100644 board/Marvell/openrd_base/openrd_base.h create mode 100644 include/configs/openrd_base.h diff --git a/MAINTAINERS b/MAINTAINERS index e9db278..99cdc12 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -588,6 +588,10 @@ Gary Jennejohn <garyj(a)denx.de> Konstantin Kletschke <kletschke(a)synertronixx.de> scb9328 ARM920T +Simon Kagstrom <simon.kagstrom(a)netinsight.net> + + openrd_base ARM926EJS (Kirkwood SoC) + Nishant Kamat <nskamat(a)ti.com> omap1610h2 ARM926EJS diff --git a/MAKEALL b/MAKEALL index f0ed8ea..9e6eee2 100755 --- a/MAKEALL +++ b/MAKEALL @@ -533,6 +533,7 @@ LIST_ARM9=" \ omap1610inn \ omap5912osk \ omap730p2 \ + openrd_base \ rd6281a \ sbc2410x \ scb9328 \ diff --git a/Makefile b/Makefile index 0449a5b..27b0179 100644 --- a/Makefile +++ b/Makefile @@ -3018,6 +3018,9 @@ omap1610h2_cs_autoboot_config: unconfig omap5912osk_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm926ejs omap5912osk ti omap +openrd_base_config: unconfig + @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood + xtract_omap730p2 = $(subst _cs0boot,,$(subst _cs3boot,, $(subst _config,,$1))) omap730p2_config \ diff --git a/board/Marvell/openrd_base/Makefile b/board/Marvell/openrd_base/Makefile new file mode 100644 index 0000000..defbb08 --- /dev/null +++ b/board/Marvell/openrd_base/Makefile @@ -0,0 +1,51 @@ +# +# (C) Copyright 2009 +# Marvell Semiconductor <www.marvell.com> +# Written-by: Prafulla Wadaskar <prafulla(a)marvell.com> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, +# MA 02110-1301 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := openrd_base.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/Marvell/openrd_base/config.mk b/board/Marvell/openrd_base/config.mk new file mode 100644 index 0000000..a4ea769 --- /dev/null +++ b/board/Marvell/openrd_base/config.mk @@ -0,0 +1,25 @@ +# +# (C) Copyright 2009 +# Marvell Semiconductor <www.marvell.com> +# Written-by: Prafulla Wadaskar <prafulla(a)marvell.com> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, +# MA 02110-1301 USA +# + +TEXT_BASE = 0x00600000 diff --git a/board/Marvell/openrd_base/openrd_base.c b/board/Marvell/openrd_base/openrd_base.c new file mode 100644 index 0000000..4c9a848 --- /dev/null +++ b/board/Marvell/openrd_base/openrd_base.c @@ -0,0 +1,158 @@ +/* + * (C) Copyright 2009 + * Net Insight <www.netinsight.net> + * Written-by: Simon Kagstrom <simon.kagstrom(a)netinsight.net> + * + * Based on sheevaplug.c: + * (C) Copyright 2009 + * Marvell Semiconductor <www.marvell.com> + * Written-by: Prafulla Wadaskar <prafulla(a)marvell.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include <common.h> +#include <miiphy.h> +#include <asm/arch/kirkwood.h> +#include <asm/arch/mpp.h> +#include "openrd_base.h" + +DECLARE_GLOBAL_DATA_PTR; + +int board_init(void) +{ + /* + * default gpio configuration + * There are maximum 64 gpios controlled through 2 sets of registers + * the below configuration configures mainly initial LED status + */ + kw_config_gpio(OPENRD_OE_VAL_LOW, + OPENRD_OE_VAL_HIGH, + OPENRD_OE_LOW, OPENRD_OE_HIGH); + + /* Multi-Purpose Pins Functionality configuration */ + u32 kwmpp_config[] = { + MPP0_NF_IO2, + MPP1_NF_IO3, + MPP2_NF_IO4, + MPP3_NF_IO5, + MPP4_NF_IO6, + MPP5_NF_IO7, + MPP6_SYSRST_OUTn, + MPP7_GPO, + MPP8_TW_SDA, + MPP9_TW_SCK, + MPP10_UART0_TXD, + MPP11_UART0_RXD, + MPP12_SD_CLK, + MPP13_SD_CMD, /* Alt UART1_TXD */ + MPP14_SD_D0, /* Alt UART1_RXD */ + MPP15_SD_D1, + MPP16_SD_D2, + MPP17_SD_D3, + MPP18_NF_IO0, + MPP19_NF_IO1, + MPP20_GE1_0, + MPP21_GE1_1, + MPP22_GE1_2, + MPP23_GE1_3, + MPP24_GE1_4, + MPP25_GE1_5, + MPP26_GE1_6, + MPP27_GE1_7, + MPP28_GPIO, + MPP29_TSMP9, + MPP30_GE1_10, + MPP31_GE1_11, + MPP32_GE1_12, + MPP33_GE1_13, + MPP34_GPIO, /* UART1 / SD sel */ + MPP35_TDM_CH0_TX_QL, + MPP36_TDM_SPI_CS1, + MPP37_TDM_CH2_TX_QL, + MPP38_TDM_CH2_RX_QL, + MPP39_AUDIO_I2SBCLK, + MPP40_AUDIO_I2SDO, + MPP41_AUDIO_I2SLRC, + MPP42_AUDIO_I2SMCLK, + MPP43_AUDIO_I2SDI, + MPP44_AUDIO_EXTCLK, + MPP45_TDM_PCLK, + MPP46_TDM_FS, + MPP47_TDM_DRX, + MPP48_TDM_DTX, + MPP49_TDM_CH0_RX_QL, + 0 + }; + kirkwood_mpp_conf(kwmpp_config); + + /* + * arch number of board + */ + gd->bd->bi_arch_number = MACH_TYPE_OPENRD_BASE; + + /* adress of boot parameters */ + gd->bd->bi_boot_params = kw_sdram_bar(0) + 0x100; + return 0; +} + +int dram_init(void) +{ + int i; + + for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) { + gd->bd->bi_dram[i].start = kw_sdram_bar(i); + gd->bd->bi_dram[i].size = kw_sdram_bs(i); + } + return 0; +} + +#ifdef CONFIG_RESET_PHY_R +void reset_phy(void) +{ + u16 reg; + u16 devadr; + char *name = "egiga0"; + + if (miiphy_set_current_dev(name)) + return; + + /* command to read PHY dev address */ + if (miiphy_read(name, 0xEE, 0xEE, (u16 *) &devadr)) { + printf("Err..%s could not read PHY dev address\n", + __FUNCTION__); + return; + } + + /* + * Enable RGMII delay on Tx and Rx for CPU port + * Ref: sec 4.7.2 of chip datasheet + */ + miiphy_write(name, devadr, MV88E1116_PGADR_REG, 2); + miiphy_read(name, devadr, MV88E1116_MAC_CTRL_REG, &reg); + reg |= (MV88E1116_RGMII_RXTM_CTRL | MV88E1116_RGMII_TXTM_CTRL); + miiphy_write(name, devadr, MV88E1116_MAC_CTRL_REG, reg); + miiphy_write(name, devadr, MV88E1116_PGADR_REG, 0); + + /* reset the phy */ + miiphy_reset(name, devadr); + + printf("88E1116 Initialized on %s\n", name); +} +#endif /* CONFIG_RESET_PHY_R */ diff --git a/board/Marvell/openrd_base/openrd_base.h b/board/Marvell/openrd_base/openrd_base.h new file mode 100644 index 0000000..f3daf17 --- /dev/null +++ b/board/Marvell/openrd_base/openrd_base.h @@ -0,0 +1,46 @@ +/* + * (C) Copyright 2009 + * Net Insight <www.netinsight.net> + * Written-by: Simon Kagstrom <simon.kagstrom(a)netinsight.net> + * + * Based on sheevaplug.h: + * (C) Copyright 2009 + * Marvell Semiconductor <www.marvell.com> + * Written-by: Prafulla Wadaskar <prafulla(a)marvell.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#ifndef __OPENRD_BASE_H +#define __OPENRD_BASE_H + +#define OPENRD_OE_LOW (~(1<<28)) /* RS232 / RS485 */ +#define OPENRD_OE_HIGH (~(1<<2)) /* SD / UART1 */ +#define OPENRD_OE_VAL_LOW (0) /* Sel RS232 */ +#define OPENRD_OE_VAL_HIGH (1 << 2) /* Sel SD */ + +/* PHY related */ +#define MV88E1116_LED_FCTRL_REG 10 +#define MV88E1116_CPRSP_CR3_REG 21 +#define MV88E1116_MAC_CTRL_REG 21 +#define MV88E1116_PGADR_REG 22 +#define MV88E1116_RGMII_TXTM_CTRL (1 << 4) +#define MV88E1116_RGMII_RXTM_CTRL (1 << 5) + +#endif /* __OPENRD_BASE_H */ diff --git a/include/configs/openrd_base.h b/include/configs/openrd_base.h new file mode 100644 index 0000000..ebda0c5 --- /dev/null +++ b/include/configs/openrd_base.h @@ -0,0 +1,218 @@ +/* + * (C) Copyright 2009 + * Net Insight <www.netinsight.net> + * Written-by: Simon Kagstrom <simon.kagstrom(a)netinsight.net> + * + * Based on sheevaplug.h: + * (C) Copyright 2009 + * Marvell Semiconductor <www.marvell.com> + * Written-by: Prafulla Wadaskar <prafulla(a)marvell.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#ifndef _CONFIG_OPENRD_BASE_H +#define _CONFIG_OPENRD_BASE_H + +/* + * Version number information + */ +#define CONFIG_IDENT_STRING "\nMarvell-OpenRD_base" + +/* + * High Level Configuration Options (easy to change) + */ +#define CONFIG_MARVELL 1 +#define CONFIG_ARM926EJS 1 /* Basic Architecture */ +#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */ +#define CONFIG_KIRKWOOD 1 /* SOC Family Name */ +#define CONFIG_KW88F6281 1 /* SOC Name */ +#define CONFIG_MACH_OPENRD_BASE /* Machine type */ + +#define CONFIG_MD5 /* get_random_hex on krikwood needs MD5 support */ +#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ +#define CONFIG_KIRKWOOD_EGIGA_INIT /* Enable GbePort0/1 for kernel */ +#define CONFIG_KIRKWOOD_RGMII_PAD_1V8 /* Set RGMII Pad voltage to 1.8V */ +#define CONFIG_MV88E1116 /* Support for the MV88E1116 PHY */ + +/* + * CLKs configurations + */ +#define CONFIG_SYS_HZ 1000 + +/* + * NS16550 Configuration + */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE (-4) +#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_TCLK +#define CONFIG_SYS_NS16550_COM1 KW_UART0_BASE + +/* + * Serial Port configuration + * The following definitions let you select what serial you want to use + * for your console driver. + */ + +#define CONFIG_CONS_INDEX 1 /*Console on UART0 */ +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \ + 115200,230400, 460800, 921600 } +/* auto boot */ +#define CONFIG_BOOTDELAY 3 /* default enable autoboot */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_INITRD_TAG 1 /* enable INITRD tag */ +#define CONFIG_SETUP_MEMORY_TAGS 1 /* enable memory tag */ + +#define CONFIG_SYS_PROMPT "Marvell>> " /* Command Prompt */ +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buff Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ + +sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buff */ +/* + * Commands configuration + */ +#define CONFIG_CMD_AUTOSCRIPT +#define CONFIG_CMD_BOOTD +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ENV +#define CONFIG_CMD_FAT +#define CONFIG_CMD_LOADB +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_NAND +#define CONFIG_CMD_NET +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_RUN +#define CONFIG_CMD_SAVEENV +#define CONFIG_CMD_USB +#define CONFIG_CMD_IMI +/* + * Flash configuration + */ +#ifndef CONFIG_CMD_FLASH +#define CONFIG_SYS_NO_FLASH 1 /* Declare no flash (NOR/SPI) */ +#endif + +/* + * NAND configuration + */ +#ifdef CONFIG_CMD_NAND +#define CONFIG_NAND_KIRKWOOD +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define NAND_MAX_CHIPS 1 +#define CONFIG_SYS_NAND_BASE 0xD8000000 /* KW_DEFADR_NANDF */ +#define NAND_ALLOW_ERASE_ALL 1 +#endif + +/* + * Environment variables configurations + */ +#ifdef CONFIG_CMD_NAND +#define CONFIG_ENV_IS_IN_NAND 1 +#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */ +#else +#define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */ +#endif +/* + * max 4k env size is enough, but in case of nand + * it has to be rounded to sector size + */ +#define CONFIG_ENV_SIZE 0x20000 /* 128k */ +#define CONFIG_ENV_ADDR 0xa0000 +#define CONFIG_ENV_OFFSET 0xa0000 /* env starts here */ + +/* + * Default environment variables + */ +#define CONFIG_BOOTCOMMAND "${x_bootcmd_kernel}; " \ + "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \ + "${x_bootcmd_usb}; bootm 0x6400000;" + +#define MTDIDS_DEFAULT "nand0=nand_mtd" +#define MTDPARTS_DEFAULT "mtdparts=nand_mtd:0x100000@0x000000(uboot),0x400000@0x100000(uImage),"\ + "0x1fb00000@0x500000(rootfs)" + +#define CONFIG_EXTRA_ENV_SETTINGS "x_bootargs=console" \ + "=ttyS0,115200 "MTDPARTS_DEFAULT " rw ubi.mtd=2,2048\0" \ + "x_bootcmd_kernel=nand read 0x6400000 0x100000 0x300000\0" \ + "x_bootcmd_usb=usb start\0" \ + "x_bootargs_root=root=ubi0:rootfs rootfstype=ubifs\0" \ + "mtdids="MTDIDS_DEFAULT"\0" \ + "mtdparts="MTDPARTS_DEFAULT"\0" + +/* + * Size of malloc() pool + */ +#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* 1MiB for malloc() */ +/* size in bytes reserved for initial data */ +#define CONFIG_SYS_GBL_DATA_SIZE 128 + +/* + * Other required minimal configurations + */ +#define CONFIG_SYS_LONGHELP +#define CONFIG_AUTO_COMPLETE +#define CONFIG_CMDLINE_EDITING +#define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */ +#define CONFIG_ARCH_MISC_INIT /* call arch_misc_init() */ +#define CONFIG_DISPLAY_CPUINFO /* Display cpu info */ +#define CONFIG_NR_DRAM_BANKS 4 +#define CONFIG_STACKSIZE 0x00100000 /* regular stack- 1M */ +#define CONFIG_SYS_LOAD_ADDR 0x00800000 /* default load adr- 8M */ +#define CONFIG_SYS_MEMTEST_START 0x00400000 /* 4M */ +#define CONFIG_SYS_MEMTEST_END 0x007fffff /*(_8M -1) */ +#define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ + +/* + * Ethernet Driver configuration + */ +#ifdef CONFIG_CMD_NET +#define CONFIG_NETCONSOLE /* include NetConsole support */ +#define CONFIG_NET_MULTI /* specify more that one ports available */ +#define CONFIG_MII /* expose smi ove miiphy interface */ +#define CONFIG_KIRKWOOD_EGIGA /* Enable kirkwood Gbe Controller Driver */ +#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN /* detect link using phy */ +#define CONFIG_KIRKWOOD_EGIGA_PORTS {1,0} /* enable port 0 only */ +#define CONFIG_PHY_BASE_ADR 0x8 +#define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */ +#define CONFIG_RESET_PHY_R /* use reset_phy() to init mv8831116 PHY */ +#endif /* CONFIG_CMD_NET */ + +/* + * USB/EHCI + */ +#ifdef CONFIG_CMD_USB +#define CONFIG_USB_EHCI /* Enable EHCI USB support */ +#define CONFIG_USB_EHCI_KIRKWOOD /* on Kirkwood platform */ +#define CONFIG_EHCI_IS_TDI +#define CONFIG_USB_STORAGE +#define CONFIG_DOS_PARTITION +#define CONFIG_ISO_PARTITION +#define CONFIG_SUPPORT_VFAT +#endif /* CONFIG_CMD_USB */ + +#endif /* _CONFIG_OPENRD_BASE_H */ -- 1.6.0.4

2 11

[U-Boot] [PATCH v4] ppc/85xx: Clean up mpc8572DS PCI setup code
by Kumar Gala 21 Sep '09

21 Sep '09

Use new fsl_pci_init_port() that reduces amount of duplicated code in the board ports, use IO accessors and clean up printing of status info. Signed-off-by: Kumar Gala <galak(a)kernel.crashing.org> --- * Fix MPC85xx_DEVDISR_PCIE2/3 use of setbits_be32 board/freescale/mpc8572ds/mpc8572ds.c | 230 +++++++++++---------------------- 1 files changed, 73 insertions(+), 157 deletions(-) diff --git a/board/freescale/mpc8572ds/mpc8572ds.c b/board/freescale/mpc8572ds/mpc8572ds.c index c69934c..933dd12 100644 --- a/board/freescale/mpc8572ds/mpc8572ds.c +++ b/board/freescale/mpc8572ds/mpc8572ds.c @@ -160,189 +160,105 @@ static struct pci_controller pcie2_hose; static struct pci_controller pcie3_hose; #endif -int first_free_busno=0; #ifdef CONFIG_PCI void pci_init_board(void) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - uint devdisr = gur->devdisr; - uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19; - uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16; + struct fsl_pci_info pci_info[3]; + u32 devdisr, pordevsr, io_sel, host_agent, temp32; + int first_free_busno = 0; + int num = 0; + + int pcie_ep, pcie_configured; + + devdisr = in_be32(&gur->devdisr); + pordevsr = in_be32(&gur->pordevsr); + io_sel = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19; + host_agent = (in_be32(&gur->porbmsr) & MPC85xx_PORBMSR_HA) >> 16; debug (" pci_init_board: devdisr=%x, io_sel=%x, host_agent=%x\n", devdisr, io_sel, host_agent); - if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII1_DIS)) + if (!(pordevsr & MPC85xx_PORDEVSR_SGMII1_DIS)) printf (" eTSEC1 is in sgmii mode.\n"); - if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII2_DIS)) + if (!(pordevsr & MPC85xx_PORDEVSR_SGMII2_DIS)) printf (" eTSEC2 is in sgmii mode.\n"); - if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII3_DIS)) + if (!(pordevsr & MPC85xx_PORDEVSR_SGMII3_DIS)) printf (" eTSEC3 is in sgmii mode.\n"); - if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII4_DIS)) + if (!(pordevsr & MPC85xx_PORDEVSR_SGMII4_DIS)) printf (" eTSEC4 is in sgmii mode.\n"); - + puts("\n"); #ifdef CONFIG_PCIE3 - { - volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE3_ADDR; - struct pci_controller *hose = &pcie3_hose; - int pcie_ep = is_fsl_pci_agent(LAW_TRGT_IF_PCIE_3, host_agent); - int pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_3, io_sel); - struct pci_region *r = hose->regions; - u32 temp32; - - if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE3)){ - printf ("\n PCIE3 connected to ULI as %s (base address %x)", - pcie_ep ? "End Point" : "Root Complex", - (uint)pci); - if (pci->pme_msg_det) { - pci->pme_msg_det = 0xffffffff; - debug (" with errors. Clearing. Now 0x%08x",pci->pme_msg_det); - } - printf ("\n"); - - /* outbound memory */ - pci_set_region(r++, - CONFIG_SYS_PCIE3_MEM_BUS, - CONFIG_SYS_PCIE3_MEM_PHYS, - CONFIG_SYS_PCIE3_MEM_SIZE, - PCI_REGION_MEM); - - /* outbound io */ - pci_set_region(r++, - CONFIG_SYS_PCIE3_IO_BUS, - CONFIG_SYS_PCIE3_IO_PHYS, - CONFIG_SYS_PCIE3_IO_SIZE, - PCI_REGION_IO); - - hose->region_count = r - hose->regions; - hose->first_busno=first_free_busno; - - fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data); - - first_free_busno=hose->last_busno+1; - printf (" PCIE3 on bus %02x - %02x\n", - hose->first_busno,hose->last_busno); - - /* - * Activate ULI1575 legacy chip by performing a fake - * memory access. Needed to make ULI RTC work. - * Device 1d has the first on-board memory BAR. - */ - - pci_hose_read_config_dword(hose, PCI_BDF(2, 0x1d, 0 ), - PCI_BASE_ADDRESS_1, &temp32); - if (temp32 >= CONFIG_SYS_PCIE3_MEM_BUS) { - void *p = pci_mem_to_virt(PCI_BDF(2, 0x1d, 0), - temp32, 4, 0); - debug(" uli1572 read to %p\n", p); - in_be32(p); - } - } else { - printf (" PCIE3: disabled\n"); + pcie_ep = is_fsl_pci_agent(LAW_TRGT_IF_PCIE_3, host_agent); + pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_3, io_sel); + + if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE3)){ + SET_STD_PCIE_INFO(pci_info[num], 3); + printf (" PCIE3 connected to ULI as %s (base addr %lx)\n", + pcie_ep ? "End Point" : "Root Complex", + pci_info[num].regs); + first_free_busno = fsl_pci_init_port(&pci_info[num++], + &pcie3_hose, first_free_busno); + /* + * Activate ULI1575 legacy chip by performing a fake + * memory access. Needed to make ULI RTC work. + * Device 1d has the first on-board memory BAR. + */ + pci_hose_read_config_dword(&pcie3_hose, PCI_BDF(2, 0x1d, 0), + PCI_BASE_ADDRESS_1, &temp32); + if (temp32 >= CONFIG_SYS_PCIE3_MEM_BUS) { + void *p = pci_mem_to_virt(PCI_BDF(2, 0x1d, 0), + temp32, 4, 0); + debug(" uli1572 read to %p\n", p); + in_be32(p); } - + } else { + printf (" PCIE3: disabled\n"); } + puts("\n"); #else - gur->devdisr |= MPC85xx_DEVDISR_PCIE3; /* disable */ + setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE3); /* disable */ #endif #ifdef CONFIG_PCIE2 - { - volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE2_ADDR; - struct pci_controller *hose = &pcie2_hose; - int pcie_ep = is_fsl_pci_agent(LAW_TRGT_IF_PCIE_2, host_agent); - int pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_2, io_sel); - struct pci_region *r = hose->regions; - - if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE2)){ - printf ("\n PCIE2 connected to Slot 1 as %s (base address %x)", - pcie_ep ? "End Point" : "Root Complex", - (uint)pci); - if (pci->pme_msg_det) { - pci->pme_msg_det = 0xffffffff; - debug (" with errors. Clearing. Now 0x%08x",pci->pme_msg_det); - } - printf ("\n"); - - /* outbound memory */ - pci_set_region(r++, - CONFIG_SYS_PCIE2_MEM_BUS, - CONFIG_SYS_PCIE2_MEM_PHYS, - CONFIG_SYS_PCIE2_MEM_SIZE, - PCI_REGION_MEM); - - /* outbound io */ - pci_set_region(r++, - CONFIG_SYS_PCIE2_IO_BUS, - CONFIG_SYS_PCIE2_IO_PHYS, - CONFIG_SYS_PCIE2_IO_SIZE, - PCI_REGION_IO); - - hose->region_count = r - hose->regions; - hose->first_busno=first_free_busno; - - fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data); - first_free_busno=hose->last_busno+1; - printf (" PCIE2 on bus %02x - %02x\n", - hose->first_busno,hose->last_busno); - - } else { - printf (" PCIE2: disabled\n"); - } - + pcie_ep = is_fsl_pci_agent(LAW_TRGT_IF_PCIE_2, host_agent); + pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_2, io_sel); + + if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE2)){ + SET_STD_PCIE_INFO(pci_info[num], 2); + printf (" PCIE2 connected to Slot 1 as %s (base addr %lx)\n", + pcie_ep ? "End Point" : "Root Complex", + pci_info[num].regs); + first_free_busno = fsl_pci_init_port(&pci_info[num++], + &pcie2_hose, first_free_busno); + } else { + printf (" PCIE2: disabled\n"); } + + puts("\n"); #else - gur->devdisr |= MPC85xx_DEVDISR_PCIE2; /* disable */ + setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE2); /* disable */ #endif -#ifdef CONFIG_PCIE1 - { - volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR; - struct pci_controller *hose = &pcie1_hose; - int pcie_ep = is_fsl_pci_agent(LAW_TRGT_IF_PCIE_1, host_agent); - int pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_1, io_sel); - struct pci_region *r = hose->regions; - - if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){ - printf ("\n PCIE1 connected to Slot 2 as %s (base address %x)", - pcie_ep ? "End Point" : "Root Complex", - (uint)pci); - if (pci->pme_msg_det) { - pci->pme_msg_det = 0xffffffff; - debug (" with errors. Clearing. Now 0x%08x",pci->pme_msg_det); - } - printf ("\n"); - - /* outbound memory */ - pci_set_region(r++, - CONFIG_SYS_PCIE1_MEM_BUS, - CONFIG_SYS_PCIE1_MEM_PHYS, - CONFIG_SYS_PCIE1_MEM_SIZE, - PCI_REGION_MEM); - - /* outbound io */ - pci_set_region(r++, - CONFIG_SYS_PCIE1_IO_BUS, - CONFIG_SYS_PCIE1_IO_PHYS, - CONFIG_SYS_PCIE1_IO_SIZE, - PCI_REGION_IO); - - hose->region_count = r - hose->regions; - hose->first_busno=first_free_busno; - - fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data); - - first_free_busno=hose->last_busno+1; - printf(" PCIE1 on bus %02x - %02x\n", - hose->first_busno,hose->last_busno); - - } else { - printf (" PCIE1: disabled\n"); - } +#ifdef CONFIG_PCIE1 + pcie_ep = is_fsl_pci_agent(LAW_TRGT_IF_PCIE_1, host_agent); + pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_1, io_sel); + + if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){ + SET_STD_PCIE_INFO(pci_info[num], 1); + printf (" PCIE1 connected to Slot 2 as %s (base addr %lx)\n", + pcie_ep ? "End Point" : "Root Complex", + pci_info[num].regs); + first_free_busno = fsl_pci_init_port(&pci_info[num++], + &pcie1_hose, first_free_busno); + } else { + printf (" PCIE1: disabled\n"); } + + puts("\n"); #else - gur->devdisr |= MPC85xx_DEVDISR_PCIE; /* disable */ + setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE); /* disable */ #endif } #endif -- 1.6.0.6

1 0

[U-Boot] nand_scan() in ARM9 S3C2410
by J.Hwan.Kim 21 Sep '09

21 Sep '09

Hi, everyone I'm using u-boot for ARM9 S3C2410. My tool chain is ELDK4.2. I defined configuration "CONFIG_NAND_CMD, CONFIG_SYS_MAX_NAND_DEVICE 1, and CONFIG_SYS_NAND_BASE 0x4E00000C" for nand_init(). It works well until the routine reaches nand_scan() which is in nand_base.c When nand_scan() is called, the system hangs. For test, When I written dummy function is nand_base.c and called the dummy function from nand.c, the system is down. My u-boot is using relocation to SDRAM from NAND. The address of nand_scan() is 0x31F85894. (TEXT_BASE is 0x31F80000 and SDRAM start from 0x30000000) I'm sured that the binary data of u-boot.bin (address 0x5894) is same with SDRAM data in 0x31F85894. I think the relocation is OK. When I attached the routines of nand_base.c to nand.c, the nand_scan() function passed. Is there any hint for this problem? Thanks in advnace. Regards, J.Hwan Kim

3 3

Re: [U-Boot] network bootp/tftp hang with tsec on MPC8343
by André Schwarz 21 Sep '09

21 Sep '09

Siva, > Myself Siva, working on a custom board using MCF5485. We had a typical > problem with tftp. We are using u-boot(1.3.3) from Freescale on our first of all I'd try to use latest code. > board and trying to do tftp of filesize 12MB. Sometime file is > getting downloaded into external DDR SDRAM correctly. Sometime u-boot > get’s hanged. This problem is observed during cold bootup. When we > switch off the board and powered it up, we are facing this problem. If > we wait for 1 or 2 minutes after the board get’s powered up, try to do > tftp it goes well. After going through your post on internet > (http://www.mail-archive.com/u-boot@lists.denx.de/msg00719.html) , I > am suspecting this could be problem with our DDR SDRAM controller > initialization. > Using memory with single read/write access is very relaxed compared to burst mode access during DMA ops. I've had a plain simple timing violation ... there are lots of dynamic parameters that have to be met. There's no general advice - sorry. Are you sure that it is a memory problem ? Any obscure crashes running linux or other apps ? If not it's more likely to be a networking issue. R/S-GMII also has strict timing requirements. What about signal integrity issues - are you sure the interface is working fine from an electrical point of view ? > U-boot Ethernet driver uses DMA to transfer the frames. But the serail > console log shows some timeouts (T) when the U-boot hangs during > transfer. > ok - could be anything. > > > If we wait for 1 or 2 minutes before doing tftp to get the image into > RAM , it is getting downloaded properly. Could you please suggest what > exactly you did in your SRAM configuration to fix the problem? looks like a thermal issue, i.e. electrical problem. Again, this might be either local memory or MII. What kind of network are you using ? I'm not familiar with MCF54xx ... Get you memory device datasheet and match the dynamic parameters with that of your CPU's memory controller. Maybe there are others having similar problems with your particular CPU. Regards, André > > > > Please find the attached log: > > > U-Boot 1.3.3 (Sep 18 2009 - 10:24:03) > CPU: Freescale MCF5485 > CPU CLK 200 Mhz BUS CLK 100 Mhz > Board: Freescale FireEngine 5485 EVB > DRAM: 128 MB > POST: Checking Ram...PASSED. > FLASH: 16 MB > In: serial > Out: serial > Err: serial > Net: rxbd f0012000 txbd f0012100 > rxbd f0012870 txbd f0012970 > FEC0, FEC1 > Hit any key to stop autoboot: 5 > > > -> printenv > bootdelay=5 > baudrate=115200 > netmask=255.255.255.0 > hostname=M548xEVB > netdev=eth0 > loadaddr=1000 > u-boot=u-boot.bin > load=tftp ${loadaddr) ${u-boot} > kernel=u-boot.bin > load=tftp ${loadaddr) ${kernel} > upd=run load; run prog > progboot=prot off 1:0-2;era e0000000 e005ffff;cp.b ${loadaddr} > e0000000 ${filesize}; > progkern=prot off 1:4-51;era e0080000 e067ffff;cp.b ${loadaddr} > e0080000 ${filesize};save > bootargs=console=/dev/console,115200 root=/dev/ram0 rootfstype=romfs > ro > bootcmd=cp.b e0080000 ${loadaddr} ${filesize};go 2000 > ethact=FEC0 > ethaddr=00:25:F7:10:00:1F > eth1addr=00:25:F7:10:00:20 > stdin=serial > stdout=serial > stderr=serial > mem=130560k > gatewayip=169.254.0.102 > ipaddr=169.254.0.101 > serverip=169.254.0.253 > filesize=C7FFFF > Environment size: 720/131068 bytes > -> tftp 10000 image.bin;prot off 1:4-103;era E0080000 E0CFFFFF;cp.b > 1000 E0080000 BEEC0F;reset; > Using FEC0 device > TFTP from server 169.254.0.253; our IP address is 169.254.0.101 > Filename 'image.bin'. > Load address: 0x10000 > Loading: > *################################################################# > ################################################################# > ################################################################# > ########################################T ######################### > ################################################################# > ######################### > > > Thanks, > Siva > > MATRIX VISION GmbH, Talstrasse 16, DE-71570 Oppenweiler Registergericht: Amtsgericht Stuttgart, HRB 271090 Geschaeftsfuehrer: Gerhard Thullner, Werner Armingeon, Uwe Furtner, Hans-Joachim Reich

1 0