March 2024 - U-Boot

[PATCH] net: phy: ncsi: reslove the unaligned access issue
by Jacky Chou 28 Mar '24

28 Mar '24

>From the ethernet header is not on aligned, because the length of the ethernet header is 14 bytes. Therefore, unaligned access must be done here. Signed-off-by: Jacky Chou <jacky_chou(a)aspeedtech.com> --- drivers/net/phy/ncsi.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/net/phy/ncsi.c b/drivers/net/phy/ncsi.c index eb3fd65bb4..04617b7840 100644 --- a/drivers/net/phy/ncsi.c +++ b/drivers/net/phy/ncsi.c @@ -286,11 +286,11 @@ static void ncsi_rsp_gc(struct ncsi_rsp_pkt *pkt) } c = &ncsi_priv->packages[np].channels[nc]; - c->cap_generic = ntohl(gc->cap) & NCSI_CAP_GENERIC_MASK; - c->cap_bc = ntohl(gc->bc_cap) & NCSI_CAP_BC_MASK; - c->cap_mc = ntohl(gc->mc_cap) & NCSI_CAP_MC_MASK; - c->cap_aen = ntohl(gc->aen_cap) & NCSI_CAP_AEN_MASK; - c->cap_vlan = ntohl(gc->vlan_mode) & NCSI_CAP_VLAN_MASK; + c->cap_generic = get_unaligned_be32(&gc->cap) & NCSI_CAP_GENERIC_MASK; + c->cap_bc = get_unaligned_be32(&gc->bc_cap) & NCSI_CAP_BC_MASK; + c->cap_mc = get_unaligned_be32(&gc->mc_cap) & NCSI_CAP_MC_MASK; + c->cap_aen = get_unaligned_be32(&gc->aen_cap) & NCSI_CAP_AEN_MASK; + c->cap_vlan = gc->vlan_mode & NCSI_CAP_VLAN_MASK; /* End of probe for this channel */ } -- 2.25.1

3 2

[PATCH 0/5] net: mdio-uclass: probe generic Ethernet PHY driver & Fix Beagleplay Ethernet
by Roger Quadros 28 Mar '24

28 Mar '24

Currently, the GPIO Reset Device Tree properties of the PHY node are ignored when the PHY is probed via mdio-uclass driver [1]. To resolve this, for each child of the MDIO bus node, bind and probe the generic Ethernet PHY driver if CONFIG_DM_ETH_PHY is enabled. This should now show the generic_phy_driver in "dm tree" and also apply the GPIO reset before the MDIO bus driver scans the bus for the PHYs. ethernet 0 [ + ] am65_cpsw_nuss_port | |-- ethernet@8000000port@1 bootdev 3 [ ] eth_bootdev | | `-- port(a)1.bootdev mdio 0 [ + ] cpsw_mdio | `-- mdio@f00 eth_phy_ge 0 [ + ] eth_phy_generic_drv | |-- ethernet-phy@0 eth_phy_ge 1 [ + ] eth_phy_generic_drv | `-- ethernet-phy@1 To test this on Beagleplay, the following series is required [1] Switch am65-cpsw to DM MDIO https://lore.kernel.org/all/20240228-for-2024-07-am65-cpsw-mdio-v2-0-f74f97… The last 3 patches are marked [not-for-merge]. They are to show how the whole solution can work to fix Ethernet on Beagleplay, which has been broken so far. Those DT patches will be sent once the device tree changes are merged into Linux tree. Signed-off-by: Roger Quadros <rogerq(a)kernel.org> --- Roger Quadros (5): net: mdio-uclass: Bind and probe generic Ethernet PHY driver configs/am62x_beagleplay_a53_defconfig: enable DM_ETH_PHY [not-for-merge] arm: dts: k3-am62*: sync with linux-next-20240229 [not-for-merge] k3-am625-beagleplay-u-boot: get CPSW Ethernet to work [not-for-merge] arm: dts: k3-am625-beagleplay: Fix Ethernet PHY reset GPIO arch/arm/dts/k3-am62-main.dtsi | 126 ++++++++++++++--- arch/arm/dts/k3-am62-mcu.dtsi | 4 +- arch/arm/dts/k3-am62-phycore-som.dtsi | 5 +- arch/arm/dts/k3-am62-thermal.dtsi | 5 +- arch/arm/dts/k3-am62-verdin-dev.dtsi | 4 +- arch/arm/dts/k3-am62-verdin-wifi.dtsi | 1 - arch/arm/dts/k3-am62-verdin.dtsi | 76 +++++++--- arch/arm/dts/k3-am62-wakeup.dtsi | 38 +++-- arch/arm/dts/k3-am62.dtsi | 4 +- arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi | 63 +++++++++ arch/arm/dts/k3-am625-beagleplay.dts | 66 ++++----- arch/arm/dts/k3-am625-phyboard-lyra-rdk.dts | 104 +++++++++++++- arch/arm/dts/k3-am625-sk.dts | 4 +- arch/arm/dts/k3-am625.dtsi | 4 +- arch/arm/dts/k3-am62a-main.dtsi | 201 +++++++++++++++++++++++++-- arch/arm/dts/k3-am62a-mcu.dtsi | 4 +- arch/arm/dts/k3-am62a-thermal.dtsi | 5 +- arch/arm/dts/k3-am62a-wakeup.dtsi | 4 +- arch/arm/dts/k3-am62a.dtsi | 4 +- arch/arm/dts/k3-am62a7-sk.dts | 162 ++++++++++++++++++++- arch/arm/dts/k3-am62a7.dtsi | 4 +- arch/arm/dts/k3-am62x-sk-common.dtsi | 24 +++- configs/am62x_beagleplay_a53_defconfig | 2 +- net/mdio-uclass.c | 41 ++++++ 24 files changed, 825 insertions(+), 130 deletions(-) --- base-commit: 84f5bb0be0ec9fbf98f8f3317b578dfc114cf44e change-id: 20240305-for-2024-07-beagleplay-eth-f82a51197937 Best regards, -- Roger Quadros <rogerq(a)kernel.org>

2 11

[PATCH] e1000: add support for i225-IT
by Marjolaine Amate 28 Mar '24

28 Mar '24

This patch adds support for i225-IT in e1000 driver. Add e1000_phy_igc. Signed-off-by: Marjolaine Amate <marjolaine.amate(a)odyssee-systemes.fr> --- drivers/net/e1000.c | 15 ++++++++++++++- drivers/net/e1000.h | 2 ++ include/pci_ids.h | 2 ++ 3 files changed, 18 insertions(+), 1 deletion(-) diff --git a/drivers/net/e1000.c b/drivers/net/e1000.c index 84a2a7cf90..4e7ba66677 100644 --- a/drivers/net/e1000.c +++ b/drivers/net/e1000.c @@ -116,6 +116,8 @@ static struct pci_device_id e1000_supported[] = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_I210_SERDES) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_I210_SERDES_FLASHLESS) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_I210_1000BASEKX) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_I225_UNPROGRAMMED) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_I225_IT) }, {} }; @@ -1575,6 +1577,8 @@ e1000_set_mac_type(struct e1000_hw *hw) case PCI_DEVICE_ID_INTEL_I210_SERDES: case PCI_DEVICE_ID_INTEL_I210_SERDES_FLASHLESS: case PCI_DEVICE_ID_INTEL_I210_1000BASEKX: + case PCI_DEVICE_ID_INTEL_I225_UNPROGRAMMED: + case PCI_DEVICE_ID_INTEL_I225_IT: hw->mac_type = e1000_igb; break; default: @@ -3258,7 +3262,8 @@ e1000_setup_copper_link(struct e1000_hw *hw) if (ret_val) return ret_val; } else if (hw->phy_type == e1000_phy_m88 || - hw->phy_type == e1000_phy_igb) { + hw->phy_type == e1000_phy_igb || + hw->phy_type == e1000_phy_igc) { ret_val = e1000_copper_link_mgp_setup(hw); if (ret_val) return ret_val; @@ -4531,6 +4536,8 @@ e1000_get_phy_cfg_done(struct e1000_hw *hw) case e1000_igb: while (timeout) { if (hw->mac_type == e1000_igb) { + if (hw->phy_type == e1000_phy_igc) + break; if (E1000_READ_REG(hw, I210_EEMNGCTL) & cfg_mask) break; } else { @@ -4769,6 +4776,7 @@ e1000_phy_reset(struct e1000_hw *hw) case e1000_phy_igp_3: case e1000_phy_ife: case e1000_phy_igb: + case e1000_phy_igc: ret_val = e1000_phy_hw_reset(hw); if (ret_val) return ret_val; @@ -4834,6 +4842,9 @@ static int e1000_set_phy_type (struct e1000_hw *hw) case I210_I_PHY_ID: hw->phy_type = e1000_phy_igb; break; + case I225_I_PHY_ID: + hw->phy_type = e1000_phy_igc; + break; /* Fall Through */ default: /* Should never have loaded on this device */ @@ -4941,6 +4952,8 @@ e1000_detect_gig_phy(struct e1000_hw *hw) case e1000_igb: if (hw->phy_id == I210_I_PHY_ID) match = true; + if (hw->phy_id == I225_I_PHY_ID) + match = true; break; default: DEBUGOUT("Invalid MAC type %d\n", hw->mac_type); diff --git a/drivers/net/e1000.h b/drivers/net/e1000.h index f788394da8..e1311126a3 100644 --- a/drivers/net/e1000.h +++ b/drivers/net/e1000.h @@ -212,6 +212,7 @@ typedef enum { e1000_phy_igp_3, e1000_phy_ife, e1000_phy_igb, + e1000_phy_igc, e1000_phy_bm, e1000_phy_undefined = 0xFF } e1000_phy_type; @@ -2420,6 +2421,7 @@ struct e1000_hw { #define BME1000_E_PHY_ID 0x01410CB0 #define I210_I_PHY_ID 0x01410C00 +#define I225_I_PHY_ID 0x67C9DCC0 /* Miscellaneous PHY bit definitions. */ #define PHY_PREAMBLE 0xFFFFFFFF diff --git a/include/pci_ids.h b/include/pci_ids.h index b63bf45168..f1886c3a75 100644 --- a/include/pci_ids.h +++ b/include/pci_ids.h @@ -2710,6 +2710,8 @@ #define PCI_DEVICE_ID_INTEL_I211_COPPER 0x1539 #define PCI_DEVICE_ID_INTEL_I210_COPPER_FLASHLESS 0x157b #define PCI_DEVICE_ID_INTEL_I210_SERDES_FLASHLESS 0x157c +#define PCI_DEVICE_ID_INTEL_I225_UNPROGRAMMED 0x15dF +#define PCI_DEVICE_ID_INTEL_I225_IT 0x0d9f #define PCI_DEVICE_ID_INTEL_80960_RP 0x1960 #define PCI_DEVICE_ID_INTEL_82840_HB 0x1a21 #define PCI_DEVICE_ID_INTEL_82845_HB 0x1a30 -- 2.43.0

2 1

[PATCH v3 0/5] net: hifemac: a few cleanups
by Yang Xiwen via B4 Relay 28 Mar '24

28 Mar '24

- Fix the use of log_msg_ret() and add dev_xxx() for error reporting. - Register mdio subnode as a mdio bus device for hifemac. - Implement ops needed by `net stats` - Make functions static. Signed-off-by: Yang Xiwen <forbidden405(a)outlook.com> --- Changes in v3: - hisi-femac: add missing `static` to avoid polluting global namespace. - Link to v2: https://lore.kernel.org/r/20240122-net-v2-0-78a368896f62@outlook.com Changes in v2: - hisi-femac: add statistics related operations - Link to v1: https://lore.kernel.org/r/20240119-net-v1-0-d1feb8e16ac6@outlook.com --- Yang Xiwen (5): net: hifemac_mdio: use log_msg_ret() correctly, report error by dev_err() net: hifemac: fix log reporting net: hifemac: register MDIO bus device for subnode net: hifemac: implement `net stats` needed ops net: hifemac: make some functions static drivers/net/hifemac.c | 229 +++++++++++++++++++++++++++++++++++++-------- drivers/net/hifemac_mdio.c | 11 ++- 2 files changed, 198 insertions(+), 42 deletions(-) --- base-commit: f7cca7ccc5117eaafcc2bde91ad1bed6fee7cfc3 change-id: 20240119-net-72a32675eeb4 Best regards, -- Yang Xiwen <forbidden405(a)outlook.com>

2 6

[PATCH] net: phy: the NC-SI phy device do not require mdio bus
by Jacky Chou 28 Mar '24

28 Mar '24

As with fixed-link phy device, the NC-SI phy devive does not require an mdio bus. So, a condition is added to check the NC-SI phy id to avoid accessing the bus pointer that is NULL. Signed-off-by: Jacky Chou <jacky_chou(a)aspeedtech.com> --- drivers/net/phy/phy.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index 63b3e46f10..9991d86037 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -566,7 +566,8 @@ struct phy_device *phy_device_create(struct mii_dev *bus, int addr, return NULL; } - if (addr >= 0 && addr < PHY_MAX_ADDR && phy_id != PHY_FIXED_ID) + if (addr >= 0 && addr < PHY_MAX_ADDR && phy_id != PHY_FIXED_ID && + phy_id != PHY_NCSI_ID) bus->phymap[addr] = dev; return dev; -- 2.34.1

3 2

[PATCH 1/1] net: phy: Fix signed shift overflow
by Heinrich Schuchardt 28 Mar '24

28 Mar '24

From: Eugeniu Rosca <erosca(a)de.adit-jv.com> Booting R-Car Gen3 arm64 U-Boot with CONFIG_UBSAN=y resulted in: ===================================================================== UBSAN: Undefined behaviour in drivers/net/phy/phy.c:728:19 left shift of 1 by 31 places cannot be represented in type 'int' ===================================================================== Fix it by appending the UL suffix to the numeric literal. While at it, convert the type of "addr" variable from signed to unsigned, to protect against shifting the numeric literal by a negative value (which would lead to yet another undefined behavior). Fixes: 1adb406b0141 ("phy: add phy_find_by_mask/phy_connect_dev") Signed-off-by: Eugeniu Rosca <erosca(a)de.adit-jv.com> * Using U-suffix for integer is sufficient. * ffs() of non-zero value cannot be 0. But addr being unsigned is * preferable. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt(a)canonical.com> --- drivers/net/phy/phy.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index 63b3e46f10..f39ca942f6 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -642,12 +642,12 @@ static struct phy_device *search_for_existing_phy(struct mii_dev *bus, { /* If we have one, return the existing device, with new interface */ while (phy_mask) { - int addr = ffs(phy_mask) - 1; + unsigned int addr = ffs(phy_mask) - 1; if (bus->phymap[addr]) return bus->phymap[addr]; - phy_mask &= ~(1 << addr); + phy_mask &= ~(1U << addr); } return NULL; } -- 2.43.0

2 1

[PATCH v3] net: phy: Factor out PHY GPIO reset code
by Marek Vasut 28 Mar '24

28 Mar '24

Pull the PHY GPIO reset code into separate function, since this is and will be reused multiple times. Set up default reset assert and deassert timing to generous 20ms and 1ms for maximum compatibility in case those DT properties are missing. Reviewed-by: Ramon Fried <rfried.dev(a)gmail.com> Signed-off-by: Marek Vasut <marek.vasut+renesas(a)mailbox.org> --- Cc: Joe Hershberger <joe.hershberger(a)ni.com> Cc: Marek Vasut <marek.vasut+renesas(a)mailbox.org> Cc: Michal Simek <michal.simek(a)amd.com> Cc: Nishanth Menon <nm(a)ti.com> Cc: Ramon Fried <rfried.dev(a)gmail.com> --- V2: - Fix am335x_evm build with OF_REAL disabled - Collect RB from Ramon V3: - Drop stale conditional --- drivers/net/phy/ethernet_id.c | 37 ++++------------------- drivers/net/phy/phy.c | 55 +++++++++++++++++++++++++++++++++++ include/phy.h | 9 ++++++ 3 files changed, 69 insertions(+), 32 deletions(-) diff --git a/drivers/net/phy/ethernet_id.c b/drivers/net/phy/ethernet_id.c index 6cb1fd4453e..4dfdee60dcc 100644 --- a/drivers/net/phy/ethernet_id.c +++ b/drivers/net/phy/ethernet_id.c @@ -18,12 +18,11 @@ struct phy_device *phy_connect_phy_id(struct mii_dev *bus, struct udevice *dev, { struct phy_device *phydev; struct ofnode_phandle_args phandle_args; - struct gpio_desc gpio; const char *node_name; struct udevice *pdev; - ofnode node; - u32 id, assert, deassert; u16 vendor, device; + ofnode node; + u32 id; int ret; if (dev_read_phandle_with_args(dev, "phy-handle", NULL, 0, 0, @@ -41,35 +40,9 @@ struct phy_device *phy_connect_phy_id(struct mii_dev *bus, struct udevice *dev, return NULL; } - if (!IS_ENABLED(CONFIG_DM_ETH_PHY)) { - ret = gpio_request_by_name_nodev(node, "reset-gpios", 0, &gpio, - GPIOD_IS_OUT | GPIOD_ACTIVE_LOW); - if (!ret) { - assert = ofnode_read_u32_default(node, - "reset-assert-us", 0); - deassert = ofnode_read_u32_default(node, - "reset-deassert-us", - 0); - ret = dm_gpio_set_value(&gpio, 1); - if (ret) { - dev_err(dev, - "Failed assert gpio, err: %d\n", ret); - return NULL; - } - - udelay(assert); - - ret = dm_gpio_set_value(&gpio, 0); - if (ret) { - dev_err(dev, - "Failed deassert gpio, err: %d\n", - ret); - return NULL; - } - - udelay(deassert); - } - } + ret = phy_gpio_reset(dev); + if (ret) + return NULL; if (phyaddr == -1) phyaddr = ofnode_read_u32_default(phandle_args.node, "reg", -1); diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index 63b3e46f101..a7a6fa66268 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -18,6 +18,8 @@ #include <phy.h> #include <errno.h> #include <asm/global_data.h> +#include <asm-generic/gpio.h> +#include <dm/device_compat.h> #include <dm/of_extra.h> #include <linux/bitops.h> #include <linux/delay.h> @@ -768,6 +770,59 @@ int miiphy_reset(const char *devname, unsigned char addr) return phy_reset(phydev); } +#if CONFIG_IS_ENABLED(DM_GPIO) && CONFIG_IS_ENABLED(OF_REAL) && \ + !IS_ENABLED(CONFIG_DM_ETH_PHY) +int phy_gpio_reset(struct udevice *dev) +{ + struct ofnode_phandle_args phandle_args; + struct gpio_desc gpio; + u32 assert, deassert; + ofnode node; + int ret; + + ret = dev_read_phandle_with_args(dev, "phy-handle", NULL, 0, 0, + &phandle_args); + /* No PHY handle is OK */ + if (ret) + return 0; + + node = phandle_args.node; + if (!ofnode_valid(node)) + return -EINVAL; + + ret = gpio_request_by_name_nodev(node, "reset-gpios", 0, &gpio, + GPIOD_IS_OUT | GPIOD_ACTIVE_LOW); + /* No PHY reset GPIO is OK */ + if (ret) + return 0; + + assert = ofnode_read_u32_default(node, "reset-assert-us", 20000); + deassert = ofnode_read_u32_default(node, "reset-deassert-us", 1000); + ret = dm_gpio_set_value(&gpio, 1); + if (ret) { + dev_err(dev, "Failed assert gpio, err: %d\n", ret); + return ret; + } + + udelay(assert); + + ret = dm_gpio_set_value(&gpio, 0); + if (ret) { + dev_err(dev, "Failed deassert gpio, err: %d\n", ret); + return ret; + } + + udelay(deassert); + + return 0; +} +#else +int phy_gpio_reset(struct udevice *dev) +{ + return 0; +} +#endif + struct phy_device *phy_find_by_mask(struct mii_dev *bus, uint phy_mask) { /* Reset the bus */ diff --git a/include/phy.h b/include/phy.h index ae23814bbf3..90b7e364101 100644 --- a/include/phy.h +++ b/include/phy.h @@ -183,6 +183,15 @@ struct fixed_link { */ int phy_reset(struct phy_device *phydev); +/** + * phy_gpio_reset() - Resets the specified PHY using GPIO reset + * Toggles the optional PHY reset GPIO + * + * @dev: PHY udevice to reset + * @return: 0 if OK, -ve on error + */ +int phy_gpio_reset(struct udevice *dev); + /** * phy_find_by_mask() - Searches for a PHY on the specified MDIO bus * The function checks the PHY addresses flagged in phy_mask and returns a -- 2.43.0

2 1

[PATCH] net: phy: ncsi: Correct the endian of the checksum
by Jacky Chou 28 Mar '24

28 Mar '24

There is no need to perform the endian twice here. Signed-off-by: Jacky Chou <jacky_chou(a)aspeedtech.com> --- drivers/net/phy/ncsi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/phy/ncsi.c b/drivers/net/phy/ncsi.c index eb3fd65bb4..74c5386d2e 100644 --- a/drivers/net/phy/ncsi.c +++ b/drivers/net/phy/ncsi.c @@ -551,7 +551,7 @@ static int ncsi_send_command(unsigned int np, unsigned int nc, unsigned int cmd, checksum = ncsi_calculate_checksum((unsigned char *)hdr, sizeof(*hdr) + len); pchecksum = (__be32 *)((void *)(hdr + 1) + len); - put_unaligned_be32(htonl(checksum), pchecksum); + put_unaligned_be32(checksum, pchecksum); if (wait) { net_set_timeout_handler(1000UL, ncsi_timeout_handler); -- 2.25.1

3 6

[PATCH] net: phy: ncsi: fixed not nullify the pointers after free
by Jacky Chou 28 Mar '24

28 Mar '24

The issue occurs the UAF (use-after-free) to cause double free when do the realloc function for the pointers during the reinitialization NC-SI process, and it will cause the memory management occurs error. So, nullify these pointers after free. Signed-off-by: Jacky Chou <jacky_chou(a)aspeedtech.com> --- drivers/net/phy/ncsi.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/phy/ncsi.c b/drivers/net/phy/ncsi.c index eb3fd65bb4..9689385884 100644 --- a/drivers/net/phy/ncsi.c +++ b/drivers/net/phy/ncsi.c @@ -619,9 +619,12 @@ static void ncsi_handle_aen(struct ip_udp_hdr *ip, unsigned int len) /* Link or configuration lost - just redo the discovery process */ ncsi_priv->state = NCSI_PROBE_PACKAGE_SP; - for (i = 0; i < ncsi_priv->n_packages; i++) + for (i = 0; i < ncsi_priv->n_packages; i++) { free(ncsi_priv->packages[i].channels); + ncsi_priv->packages[i].channels = NULL; + } free(ncsi_priv->packages); + ncsi_priv->packages = NULL; ncsi_priv->n_packages = 0; ncsi_priv->current_package = NCSI_PACKAGE_MAX; -- 2.34.1

2 1

[NEXT] Pull request acpi-next-20240328
by Heinrich Schuchardt 28 Mar '24

28 Mar '24

Dear Tom, The following changes since commit ab8d9ca3044acf51d8ff3bf3c4718c48f30ad606: Merge tag 'v2024.04-rc5' into next (2024-03-25 22:15:47 -0400) are available in the Git repository at: https://source.denx.de/u-boot/custodians/u-boot-efi.git tags/acpi-next-20240328 for you to fetch changes up to 6eca28b61af1835e70a6feb86f86a0b18b1708c6: smbios: fill wake-up type (2024-03-27 09:23:30 +0100) Gitlab CI showed no issues: https://source.denx.de/u-boot/custodians/u-boot-efi/-/pipelines/20081 ---------------------------------------------------------------- Pull request acpi-next-20240328 ACPI: * rename fields rename aslc_id, aslc_revision to match ACPI specification * remove duplicate declaration of acpi_fill_header() * document fields of HETP table * MAINTAINERS: add include/acpi/ to ACPI SMBIOS: * provide wake-up type in SMBIOS table * display wake-up type in smbios command ---------------------------------------------------------------- Heinrich Schuchardt (6): acpi: rename aslc_id, aslc_revision MAINTAINERS: add include/acpi/ to ACPI acpi: document HETP table acpi: remove duplicate declaration of acpi_fill_header() cmd: smbios: type 1 wake-up time, family smbios: fill wake-up type MAINTAINERS | 1 + arch/x86/lib/acpi_nhlt.c | 2 +- arch/x86/lib/acpi_table.c | 8 ++-- cmd/acpi.c | 2 +- cmd/smbios.c | 25 ++++++++++++- include/acpi/acpi_table.h | 95 ++++++++++++++++++++++++++++++----------------- include/smbios.h | 27 ++++++++++++++ lib/acpi/acpi_table.c | 4 +- lib/acpi/ssdt.c | 2 +- lib/smbios.c | 1 + test/dm/acpi.c | 6 +-- 11 files changed, 124 insertions(+), 49 deletions(-)

2 1