June 2021 - U-Boot

pull request of u-boot-fsl-qoriq for v2021.07
by Priyanka Jain 17 Jun '21

17 Jun '21

Dear Tom, Please find my pull-request for u-boot-fsl-qoriq/master https://github.com/u-boot/u-boot/pull/82 Summary fsl-qoriq: Bug fixes related pfe, eth, thermal node, vid.c, cpu release, mmc, usb, env, etc for Layerscape boards powerpc: Update Maintainers for some boards. Signed-off-by: Priyanka Jain mailto:priyanka.jain@nxp.com --- The following changes since commit 9301a5cc99dd0c298e2f7fe2fa98a7287fcda772: Merge https://source.denx.de/u-boot/custodians/u-boot-marvell (2021-06-15 08:23:04 -0400) are available in the Git repository at: https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq.git HEAD for you to fetch changes up to b7efcaff8bb5196b9271bcfaeb0a5f100b3867c2: board: freescale: t1028xrdb: Add MAINTAINER for revD (2021-06-17 12:52:54 +0530) ---------------------------------------------------------------- Aleksandar Gerasimovski (11): configs: seli8: set envsize to 0x4000 keymile: common: fix hexadecimal env variable format net: tsec: add option to set device max-speed via dts board/km: add support for expu1 design based on nxp km/ls102xa: add support for u-boot POST memory test km: ls102xa: add missing define for PRAM regions km/scripts: fix saveenv command syntax km: ls102x: set ethrotate envvar to no km: ls102x: update device disable configuration acc hw design desc pg-wcom-ls102x: initialize front led and app buf pg-wcom-ls102xa: fix sys counter frequency Biwen Li (1): configs: ls2088aqds: fix synchronous exception Camelia Groza (4): board: freescale: t208xrdb: remove the legacy non-DM_ETH code board: freescale: t208xrdb: detect the board revision version board: freescale: t208xrdb: add Linux fdt fix-ups for rev D board: freescale: t208xrdb: add a config option for rev D dts fixups Chaitanya Sakinam (1): armv8: ls1012a: Pass PPFE firmware to Linux through FDT Hou Zhiqiang (1): pci: layerscape-ep: Add check of the PCIe controller enablement Jiafei Pan (1): armv8: layerscape: add PSCI support for cpu release Kuldeep Singh (1): configs: ls1088a: Enable CONFIG_SYS_RELOC_ENV_ADDR Lasse Klok Mikkelsen (1): arm: dts: ls1021a.dtsi: Fix invalid reg on gpio nodes Manish Tomar (1): configs: ls1046afrwy: Add secure boot config Matt Merhar (1): board: freescale: p2041rdb: use correct EEPROM address length Mian Yousaf Kaukab (1): ls1012a: net: pfe: remove pfe stop from bootcmd Michael Walle (1): board: sl28: fix RGMII clock and voltage Priyanka Jain (5): board: freescale: t4rdb: Add MAINTAINER board: freescale: p1_p2_rdb_pc: Add MAINTAINER board: freescale: p2041rdb: Add MAINTAINER board: freescale: t102xrdb: Add MAINTAINER board: freescale: t1028xrdb: Add MAINTAINER for revD Priyanka Singh (1): board: freescale: vid.c: Add check for return value of adjust_vdd() Ran Wang (1): armv8: Update erratum number to align with doc Yangbo Lu (5): armv8: layerscape: enable eMMC HS400 workarounds for LX2160A/LX2162A arm: dts: lx2162aqds: support eMMC HS400 mode on esdhc1 mmc: fsl_esdhc: convert to CONFIG_FSL_ESDHC_VS33_NOT_SUPPORT mmc: fsl_esdhc_imx: drop CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33 armv8: layerscape: drop CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33 arch/arm/Kconfig | 18 +++ arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 12 +- arch/arm/cpu/armv8/fsl-layerscape/cpu.c | 2 +- arch/arm/cpu/armv8/fsl-layerscape/cpu.h | 1 + arch/arm/cpu/armv8/fsl-layerscape/fdt.c | 150 +++++++++++++++++++++++- arch/arm/cpu/armv8/fsl-layerscape/mp.c | 49 +++++--- arch/arm/cpu/armv8/fsl-layerscape/soc.c | 6 +- arch/arm/dts/Makefile | 1 + arch/arm/dts/fsl-ls1028a-kontron-sl28-var1.dts | 3 +- arch/arm/dts/fsl-ls1028a-kontron-sl28-var4.dts | 3 +- arch/arm/dts/fsl-lx2162a-qds-sd1-17.dtsi | 8 +- arch/arm/dts/fsl-lx2162a-qds-sd1-18.dtsi | 8 +- arch/arm/dts/fsl-lx2162a-qds-sd1-20.dtsi | 8 +- arch/arm/dts/fsl-lx2162a-qds.dts | 8 +- arch/arm/dts/ls1021a-pg-wcom-expu1.dts | 130 ++++++++++++++++++++ arch/arm/dts/ls1021a.dtsi | 8 +- arch/powerpc/dts/t2080rdb.dts | 7 ++ board/freescale/common/vid.c | 11 +- board/freescale/ls1012afrdm/ls1012afrdm.c | 8 ++ board/freescale/ls1012aqds/ls1012aqds.c | 8 ++ board/freescale/ls1012ardb/ls1012ardb.c | 8 ++ board/freescale/p1_p2_rdb_pc/MAINTAINERS | 2 +- board/freescale/p2041rdb/MAINTAINERS | 2 +- board/freescale/t102xrdb/MAINTAINERS | 4 +- board/freescale/t208xrdb/Kconfig | 4 + board/freescale/t208xrdb/MAINTAINERS | 4 + board/freescale/t208xrdb/eth_t208xrdb.c | 112 ++++++------------ board/freescale/t208xrdb/t208xrdb.c | 24 +++- board/freescale/t208xrdb/t208xrdb.h | 1 + board/freescale/t4rdb/MAINTAINERS | 4 +- board/keymile/Kconfig | 7 ++ board/keymile/common/common.c | 11 +- board/keymile/pg-wcom-ls102xa/Kconfig | 20 ++++ board/keymile/pg-wcom-ls102xa/MAINTAINERS | 3 + board/keymile/pg-wcom-ls102xa/pg-wcom-ls102xa.c | 69 +++++++++-- board/keymile/scripts/ramfs-common.txt | 2 +- configs/T2080RDB_revD_NAND_defconfig | 93 +++++++++++++++ configs/T2080RDB_revD_SDCARD_defconfig | 90 ++++++++++++++ configs/T2080RDB_revD_SPIFLASH_defconfig | 92 +++++++++++++++ configs/T2080RDB_revD_defconfig | 77 ++++++++++++ configs/ls1046afrwy_tfa_SECURE_BOOT_defconfig | 1 + configs/ls1088aqds_tfa_defconfig | 1 + configs/ls1088ardb_tfa_defconfig | 1 + configs/ls2088aqds_tfa_defconfig | 2 +- configs/pg_wcom_expu1_defconfig | 70 +++++++++++ configs/pg_wcom_seli8_defconfig | 2 +- drivers/mmc/Kconfig | 7 ++ drivers/mmc/fsl_esdhc.c | 17 ++- drivers/mmc/fsl_esdhc_imx.c | 7 +- drivers/net/pfe_eth/pfe_cmd.c | 2 +- drivers/net/pfe_eth/pfe_firmware.c | 60 +++++++++- drivers/net/tsec.c | 7 +- drivers/pci/pcie_layerscape_ep.c | 4 + include/configs/P2041RDB.h | 2 +- include/configs/T208xQDS.h | 3 +- include/configs/T208xRDB.h | 9 +- include/configs/T4240RDB.h | 3 +- include/configs/km/pg-wcom-ls102xa.h | 17 ++- include/configs/kontron_sl28.h | 5 - include/configs/ls1012a2g5rdb.h | 13 +- include/configs/ls1012a_common.h | 4 +- include/configs/ls1012afrdm.h | 6 +- include/configs/ls1012afrwy.h | 13 +- include/configs/ls1012aqds.h | 12 +- include/configs/ls1012ardb.h | 14 +-- include/configs/ls1028a_common.h | 7 +- include/configs/ls1043a_common.h | 9 +- include/configs/ls1046a_common.h | 9 +- include/configs/ls1088aqds.h | 3 +- include/configs/ls1088ardb.h | 7 +- include/configs/ls2080aqds.h | 7 +- include/configs/ls2080ardb.h | 7 +- include/configs/lx2160a_common.h | 7 +- include/configs/pg-wcom-expu1.h | 53 +++++++++ include/net/pfe_eth/pfe/pfe_hw.h | 6 + scripts/config_whitelist.txt | 1 - 76 files changed, 1217 insertions(+), 259 deletions(-) create mode 100644 arch/arm/dts/ls1021a-pg-wcom-expu1.dts create mode 100644 configs/T2080RDB_revD_NAND_defconfig create mode 100644 configs/T2080RDB_revD_SDCARD_defconfig create mode 100644 configs/T2080RDB_revD_SPIFLASH_defconfig create mode 100644 configs/T2080RDB_revD_defconfig create mode 100644 configs/pg_wcom_expu1_defconfig create mode 100644 include/configs/pg-wcom-expu1.h

2 1

[PULL] u-boot-riscv/master
by Leo Liang 17 Jun '21

17 Jun '21

Hi Tom, The following changes since commit 9301a5cc99dd0c298e2f7fe2fa98a7287fcda772: Merge https://source.denx.de/u-boot/custodians/u-boot-marvell (2021-06-15 08:23:04 -0400) are available in the Git repository at: git@source.denx.de:u-boot/custodians/u-boot-riscv.git for you to fetch changes up to 62ce0a02f9e5bda51a05c5f735e5a75f6c4bbb54: riscv: andes_plic: Fix riscv_get_ipi() mask (2021-06-17 09:39:46 +0800) CI result shows no issue: https://source.denx.de/u-boot/custodians/u-boot-riscv/-/pipelines/7864 ---------------------------------------------------------------- Bin Meng (7): riscv: ae350: dts: Add SPDX license header riscv: ae350: dts: Remove the unnecessary space in bootargs riscv: ae350: dts: Remove the unnecessary #address-cells in plic nodes riscv: ae350: dts: Fix #interrupt-cells for plic0 in 32-bit riscv: ae350: dts: Add missing "u-boot, dm-spl" for SPL config riscv: ae350: doc: Remove CONFIG_SKIP_LOWLEVEL_INIT riscv: andes_plic: Fix riscv_get_ipi() mask arch/riscv/dts/ae350-u-boot.dtsi | 52 ++++++++++++++++++++++++++++++++++++++ arch/riscv/dts/ae350_32.dts | 9 ++++--- arch/riscv/dts/ae350_64.dts | 7 ++--- arch/riscv/lib/andes_plic.c | 4 ++- doc/board/AndesTech/ax25-ae350.rst | 19 +++----------- 5 files changed, 68 insertions(+), 23 deletions(-) create mode 100644 arch/riscv/dts/ae350-u-boot.dtsi Best regards, Leo

2 1

Pull request: u-boot-imx u-boot-imx-20210616
by Stefano Babic 17 Jun '21

17 Jun '21

Hi Tom, please pull from u-boot-imx, thanks ! The following changes since commit cb26d5a9265c60cee385d67eff86d115a606fbc5: Merge https://source.denx.de/u-boot/custodians/u-boot-sh (2021-06-08 17:46:49 -0400) are available in the Git repository at: https://gitlab.denx.de/u-boot/custodians/u-boot-imx.git tags/u-boot-imx-20210616 for you to fetch changes up to 40496ac3b71b9589a9149d423b81133eebce07b1: mx7d: Add Storopack's SMEGW01 board (2021-06-09 13:34:38 +0200) ---------------------------------------------------------------- u-boot-imx-20210616 ------------------- - imxrt : fixes, USB, imxrt1020-evk - imx8m: fix for verdin-imx8mm Add conga-QMX8 board - imx6 : documentation for pico-imx6: Add SeeedStudio NPI-IMX6ULL Support ventana: DM PCI - imx7d: added SMEGW01 board CI : https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/7765 ---------------------------------------------------------------- Andrey Zhizhikin (3): arm: imx: imx8mm: clock: make debug output more descriptive arm: imx: imx8mm: correct unrecognized fracpll frequency imx8mn: configs: add support for distro boot commands Fabio Estevam (2): pico-imx6: README: Fix the boot mode settings URL mx7d: Add Storopack's SMEGW01 board Giulio Benetti (31): arm: imxrt: soc: make mpu regions generic timer: imx-gpt: Add timer support for i.MX SoCs family ARM: dts: imxrt1020: add node label to osc ARM: dts: imxrt1020: add gpt1 node ARM: dts: imxrt1020-evk: enable gpt1 timer ARM: dts: imxrt1020-evk: set gpt1 as tick-timer for u-boot ARM: dts: imxrt1020-evk-u-boot: make gpt1 present for SPL ARM: dts: imxrt1020-evk: add device_type = "memory" to memory node configs: imxrt1020-evk: enable imx gpt timer as tick-timer ARM: dts: imxrt1050: add node label to osc ARM: dts: imxrt1050: add gpt1 node ARM: dts: imxrt1050-evk: enable gpt1 timer ARM: dts: imxrt1050-evk: set gpt1 as tick-timer for u-boot ARM: dts: imxrt1050-evk-u-boot: make gpt1 present for SPL ARM: dts: imxrt1050-evk: add device_type = "memory" to memory node configs: imxrt1050-evk: enable imx gpt timer as tick-timer video: mxsfb: add enabling of "axi" clock other than "per" clock video: mxsfb: add enabling of "disp_axi" clock clk: imx: clk-imxrt1050: introduce LCDIF_PIX and rename LCDIF to LCDIF_APB ARM: dts: imxrt1050: move lcdif assigned clock to dtsi ARM: dts: imxrt1050: set lcdif clocks according to mxsfb driver ARM: dts: imxrt1050-evk: remove u-boot,dm-spl ARM: dts: imxrt1050-evk: move all u-boot, dm-spl to imxrt1050-evk-u-boot.dtsi file ARM: dts: imxrt1020-evk: move all u-boot, dm-spl to imxrt1020-evk-u-boot.dtsi file ARM: dts: imxrt1020: add gpio5 node to this SoC ARM: IMXRT: introduce is_imxrt*() macros and get_cpu_rev() clk: imx: clk-imxrt1050: introduce IMXRT1050_CLK_USBOH3 usb: ehci-mx6: add support for i.MXRT ARM: dts: imxrt1050: add usbotg1, usbphy1 and usbmisc nodes ARM: dts: imxrt1050-evk: enable usbotg1 node as host configs: imxrt1050-evk: enable host usb support and its command Marek Vasut (1): ARM: imx8m: verdin-imx8mm: Increase bootm size to 64 MiB Navin Sankar Velliangiri (1): imx: Add SeeedStudio NPI-IMX6ULL Support Oleh Kravchenko (2): Add out4.ru O4-iMX-NANO board Add EV-iMX280-NANO-X-MB board Oliver Graute (1): imx: support for conga-QMX8 board Tim Harvey (1): imx: ventana: enable dm support for PCI and FEC ethernet MAINTAINERS | 12 +++ arch/arm/Kconfig | 1 + arch/arm/dts/Makefile | 12 ++- arch/arm/dts/ev-imx280-nano-x-mb.dts | 109 ++++++++++++++++++++++ arch/arm/dts/imx6qdl-gw51xx.dtsi | 2 + arch/arm/dts/imx6qdl-gw52xx.dtsi | 2 + arch/arm/dts/imx6qdl-gw53xx.dtsi | 3 + arch/arm/dts/imx6qdl-gw54xx.dtsi | 3 + arch/arm/dts/imx6qdl-gw560x.dtsi | 2 + arch/arm/dts/imx6qdl-gw5903.dtsi | 3 + arch/arm/dts/imx6qdl-gw5904.dtsi | 3 + arch/arm/dts/imx6qdl-gw5907.dtsi | 2 + arch/arm/dts/imx6qdl-gw5910.dtsi | 3 + arch/arm/dts/imx6qdl-gw5912.dtsi | 4 + arch/arm/dts/imx6qdl-gw5913.dtsi | 3 + arch/arm/dts/imx6ull-seeed-npi-imx6ull-dev-board.dts | 19 ++++ arch/arm/dts/imx6ull-seeed-npi-imx6ull-u-boot.dtsi | 24 +++++ arch/arm/dts/imx6ull-seeed-npi-imx6ull.dtsi | 271 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ arch/arm/dts/imx7d-smegw01.dts | 190 ++++++++++++++++++++++++++++++++++++++ arch/arm/dts/imx8qm-cgtqmx8.dts | 404 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ arch/arm/dts/imxrt1020-evk-u-boot.dtsi | 38 ++++++++ arch/arm/dts/imxrt1020-evk.dts | 6 ++ arch/arm/dts/imxrt1020.dtsi | 31 ++++--- arch/arm/dts/imxrt1050-evk-u-boot.dtsi | 42 +++++++++ arch/arm/dts/imxrt1050-evk.dts | 15 ++- arch/arm/dts/imxrt1050.dtsi | 57 ++++++++---- arch/arm/dts/o4-imx-nano.dts | 241 ++++++++++++++++++++++++++++++++++++++++++++++++ arch/arm/dts/o4-imx6ull-nano.dtsi | 87 ++++++++++++++++++ arch/arm/include/asm/arch-imx/cpu.h | 3 + arch/arm/include/asm/arch-imxrt/imx-regs.h | 4 + arch/arm/include/asm/mach-imx/sys_proto.h | 4 + arch/arm/mach-imx/imx8/Kconfig | 7 ++ arch/arm/mach-imx/imx8m/clock_imx8mm.c | 8 +- arch/arm/mach-imx/imxrt/soc.c | 18 +++- arch/arm/mach-imx/mx6/Kconfig | 24 +++++ arch/arm/mach-imx/mx7/Kconfig | 9 ++ board/congatec/cgtqmx8/Kconfig | 14 +++ board/congatec/cgtqmx8/MAINTAINERS | 7 ++ board/congatec/cgtqmx8/Makefile | 11 +++ board/congatec/cgtqmx8/cgtqmx8.c | 460 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ board/congatec/cgtqmx8/imximage.cfg | 21 +++++ board/congatec/cgtqmx8/spl.c | 77 ++++++++++++++++ board/congatec/common/Kconfig | 48 ++++++++++ board/congatec/common/Makefile | 23 +++++ board/congatec/common/mmc.c | 49 ++++++++++ board/gateworks/gw_ventana/common.h | 1 - board/gateworks/gw_ventana/gw_ventana.c | 99 ++++---------------- board/out4/o4-imx6ull-nano/K4B4G1646D-BCMA.cfg | 91 +++++++++++++++++++ board/out4/o4-imx6ull-nano/Kconfig | 64 +++++++++++++ board/out4/o4-imx6ull-nano/MT41K256M16HA-125E.cfg | 91 +++++++++++++++++++ board/out4/o4-imx6ull-nano/Makefile | 4 + board/out4/o4-imx6ull-nano/o4-imx6ull-nano.c | 88 ++++++++++++++++++ board/seeed/npi_imx6ull/Kconfig | 12 +++ board/seeed/npi_imx6ull/MAINTAINERS | 9 ++ board/seeed/npi_imx6ull/Makefile | 4 + board/seeed/npi_imx6ull/README | 61 +++++++++++++ board/seeed/npi_imx6ull/npi_imx6ull.c | 114 +++++++++++++++++++++++ board/seeed/npi_imx6ull/spl.c | 205 +++++++++++++++++++++++++++++++++++++++++ board/storopack/smegw01/Kconfig | 12 +++ board/storopack/smegw01/MAINTAINERS | 7 ++ board/storopack/smegw01/Makefile | 4 + board/storopack/smegw01/imximage.cfg | 100 ++++++++++++++++++++ board/storopack/smegw01/smegw01.c | 95 +++++++++++++++++++ board/technexion/pico-imx6/README | 2 +- configs/cgtqmx8_defconfig | 86 ++++++++++++++++++ configs/ev-imx280-nano-x-mb_defconfig | 91 +++++++++++++++++++ configs/gwventana_emmc_defconfig | 5 + configs/gwventana_gw5904_defconfig | 5 + configs/gwventana_nand_defconfig | 5 + configs/imx8mn_ddr4_evk_defconfig | 1 + configs/imx8mn_evk_defconfig | 1 + configs/imxrt1020-evk_defconfig | 1 + configs/imxrt1050-evk_defconfig | 8 +- configs/o4-imx6ull-nano_defconfig | 103 +++++++++++++++++++++ configs/seeed_npi_imx6ull_defconfig | 80 ++++++++++++++++ configs/smegw01_defconfig | 63 +++++++++++++ doc/board/congatec/cgtqmx8.rst | 70 ++++++++++++++ doc/board/congatec/index.rst | 9 ++ doc/board/index.rst | 1 + drivers/clk/imx/clk-imxrt1050.c | 8 +- drivers/timer/Kconfig | 7 ++ drivers/timer/Makefile | 1 + drivers/timer/imx-gpt-timer.c | 162 +++++++++++++++++++++++++++++++++ drivers/usb/host/Kconfig | 2 +- drivers/usb/host/ehci-mx6.c | 13 +-- drivers/video/mxsfb.c | 36 ++++++-- include/configs/cgtqmx8.h | 181 ++++++++++++++++++++++++++++++++++++ include/configs/gw_ventana.h | 10 -- include/configs/imx8mn_evk.h | 68 +++----------- include/configs/npi_imx6ull.h | 96 +++++++++++++++++++ include/configs/o4-imx6ull-nano.h | 33 +++++++ include/configs/smegw01.h | 63 +++++++++++++ include/configs/verdin-imx8mm.h | 2 + include/dt-bindings/clock/imxrt1050-clock.h | 6 +- 94 files changed, 4448 insertions(+), 208 deletions(-) create mode 100644 arch/arm/dts/ev-imx280-nano-x-mb.dts create mode 100644 arch/arm/dts/imx6ull-seeed-npi-imx6ull-dev-board.dts create mode 100644 arch/arm/dts/imx6ull-seeed-npi-imx6ull-u-boot.dtsi create mode 100644 arch/arm/dts/imx6ull-seeed-npi-imx6ull.dtsi create mode 100644 arch/arm/dts/imx7d-smegw01.dts create mode 100644 arch/arm/dts/imx8qm-cgtqmx8.dts create mode 100644 arch/arm/dts/o4-imx-nano.dts create mode 100644 arch/arm/dts/o4-imx6ull-nano.dtsi create mode 100644 board/congatec/cgtqmx8/Kconfig create mode 100644 board/congatec/cgtqmx8/MAINTAINERS create mode 100644 board/congatec/cgtqmx8/Makefile create mode 100644 board/congatec/cgtqmx8/cgtqmx8.c create mode 100644 board/congatec/cgtqmx8/imximage.cfg create mode 100644 board/congatec/cgtqmx8/spl.c create mode 100644 board/congatec/common/Kconfig create mode 100644 board/congatec/common/Makefile create mode 100644 board/congatec/common/mmc.c create mode 100644 board/out4/o4-imx6ull-nano/K4B4G1646D-BCMA.cfg create mode 100644 board/out4/o4-imx6ull-nano/Kconfig create mode 100644 board/out4/o4-imx6ull-nano/MT41K256M16HA-125E.cfg create mode 100644 board/out4/o4-imx6ull-nano/Makefile create mode 100644 board/out4/o4-imx6ull-nano/o4-imx6ull-nano.c create mode 100644 board/seeed/npi_imx6ull/Kconfig create mode 100644 board/seeed/npi_imx6ull/MAINTAINERS create mode 100644 board/seeed/npi_imx6ull/Makefile create mode 100644 board/seeed/npi_imx6ull/README create mode 100644 board/seeed/npi_imx6ull/npi_imx6ull.c create mode 100644 board/seeed/npi_imx6ull/spl.c create mode 100644 board/storopack/smegw01/Kconfig create mode 100644 board/storopack/smegw01/MAINTAINERS create mode 100644 board/storopack/smegw01/Makefile create mode 100644 board/storopack/smegw01/imximage.cfg create mode 100644 board/storopack/smegw01/smegw01.c create mode 100644 configs/cgtqmx8_defconfig create mode 100644 configs/ev-imx280-nano-x-mb_defconfig create mode 100644 configs/o4-imx6ull-nano_defconfig create mode 100644 configs/seeed_npi_imx6ull_defconfig create mode 100644 configs/smegw01_defconfig create mode 100644 doc/board/congatec/cgtqmx8.rst create mode 100644 doc/board/congatec/index.rst create mode 100644 drivers/timer/imx-gpt-timer.c create mode 100644 include/configs/cgtqmx8.h create mode 100644 include/configs/npi_imx6ull.h create mode 100644 include/configs/o4-imx6ull-nano.h create mode 100644 include/configs/smegw01.h Best regards, Stefano -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic(a)denx.de =====================================================================

2 1

[PATCH] cmd: setexpr: add dec operation for converting variable to decimal
by roland.gaudig-oss＠weidmueller.com 17 Jun '21

17 Jun '21

From: Roland Gaudig <roland.gaudig(a)weidmueller.com> This patch extends the setexpr command with a dec operator to convert an input value to decimal. Signed-off-by: Roland Gaudig <roland.gaudig(a)weidmueller.com> --- cmd/setexpr.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) diff --git a/cmd/setexpr.c b/cmd/setexpr.c index e828be3970..2d4bee2182 100644 --- a/cmd/setexpr.c +++ b/cmd/setexpr.c @@ -370,15 +370,16 @@ static int do_setexpr(struct cmd_tbl *cmdtp, int flag, int argc, int w; /* - * We take 3, 5, or 6 arguments: + * We take 3, 4, 5, or 6 arguments: * 3 : setexpr name value + * 4 : setexpr name dec value * 5 : setexpr name val1 op val2 * setexpr name [g]sub r s * 6 : setexpr name [g]sub r s t */ /* > 6 already tested by max command args */ - if ((argc < 3) || (argc == 4)) + if (argc < 3) return CMD_RET_USAGE; w = cmd_get_data_size(argv[0], 4); @@ -398,6 +399,13 @@ static int do_setexpr(struct cmd_tbl *cmdtp, int flag, int argc, return ret; } + /* hexadecimal to decimal conversion: "setexpr name dec value" */ + if (argc == 4 && (strcmp(argv[2], "dec") == 0)) { + w = cmd_get_data_size(argv[3], 4); + a = get_arg(argv[3], w); + return env_set_ulong(argv[1], a); + } + /* 5 or 6 args (6 args only with [g]sub) */ #ifdef CONFIG_REGEX /* @@ -515,4 +523,8 @@ U_BOOT_CMD( "setexpr name sub r s [t]\n" " - Just like gsub(), but replace only the first matching substring" #endif + "\n" + "setexpr name dec [*]value\n" + " - set environment variable 'name' to the result of the decimal\n" + " conversion of [*]value.\n" ); -- 2.25.1

1 0

[PATCH v6 0/2] Add Xilinx clock wizard driver support
by Zhengxun 17 Jun '21

17 Jun '21

Changes in v6: - modify the description in Kconfig Changes in v5: - add devicetree binding - use FIELD_PREP and FIELD_GET - use clk_get_by_name() - add clk_free() Changes in v4: - rearrange functions - remove Superfluous words - check kernel-doc comments Changes in v3: - remove incorrect usage in of_to_plat - get frequencies via clock framework - delete incorrect naming Changes in v2: - naming is aligned with linux - delete inappropriate description and code Zhengxun (2): clk: zynq: Add clock wizard driver dt-bindings: add xilinx clocking wizard bindings .../clock/xlnx,clocking-wizard.txt | 43 ++++ drivers/clk/Kconfig | 11 ++ drivers/clk/Makefile | 1 + drivers/clk/clk-xlnx-clock-wizard.c | 186 ++++++++++++++++++ 4 files changed, 241 insertions(+) create mode 100644 doc/device-tree-bindings/clock/xlnx,clocking-wizard.txt create mode 100644 drivers/clk/clk-xlnx-clock-wizard.c -- 2.17.1

4 10

u-boot on RPi4 32bit - issue after upgrading the firmware
by Marek Szyprowski 17 Jun '21

17 Jun '21

Hi! Recently I've upgraded a video core firmware on my RPi4 and I've noticed that u-boot in ARM 32bit mode stopped working properly or even randomly crashes. I've bisected the firmware releases and the issue appears for the first time in the commit 63b1922311 ("firmware: arm_loader: Update armstubs with those from PR 117 See: https://github.com/raspberrypi/tools/pull/117"). This issue can be easily observed as a failure of the xhci. See the attached log: Read start4x.elf bytes 2984808 hnd 0x000006e2 sha256 d21bf9d3954fea04 Read fixup4x.dat bytes 8432 hnd 0x000006dd sha256 10d3b073ab232613 0x00a03111 0x00000000 0x0000001f MEM GPU: 76 ARM: 948 TOTAL: 1024 Starting start4x.elf @ 0xfec00200 partition 0 PCI reset + MESS:00:00:04.800023:0: arasan: arasan_emmc_open MESS:00:00:04.975752:0: brfs: File read: /mfs/sd/config.txt MESS:00:00:04.979162:0: brfs: File read: 2153 bytes MESS:00:00:05.046081:0: brfs: File read: /mfs/sd/config.txt MESS:00:00:06.121174:0: gpioman: gpioman_get_pin_num: pin DISPLAY_DSI_PORT not defined MESS:00:00:06.128433:0: *** Restart logging MESS:00:00:06.129897:0: brfs: File read: 2153 bytes MESS:00:00:06.148533:0: hdmi: HDMI:hdmi_get_state is deprecated, use hdmi_get_display_state instead MESS:00:00:06.154474:0: HDMI0: hdmi_pixel_encoding: 300000000 MESS:00:00:06.159948:0: HDMI1: hdmi_pixel_encoding: 300000000 MESS:00:00:06.166901:0: dtb_file 'bcm2711-rpi-4-b.dtb' MESS:00:00:06.178359:0: brfs: File read: /mfs/sd/bcm2711-rpi-4-b.dtb MESS:00:00:06.181601:0: Loading 'bcm2711-rpi-4-b.dtb' to 0x100 size 0xc901 MESS:00:00:06.201386:0: brfs: File read: 51457 bytes MESS:00:00:06.267975:0: brfs: File read: /mfs/sd/config.txt MESS:00:00:06.270915:0: dtparam: audio=on MESS:00:00:06.283974:0: brfs: File read: 2153 bytes MESS:00:00:06.286148:0: Failed to load overlay 'vc4-fkms-v3d' MESS:00:00:06.291378:0: brfs: File read: /mfs/sd/overlays/vc4-fkms-v3d.dtbo MESS:00:00:06.304096:0: Failed to open command line file 'cmdline.txt' MESS:00:00:07.484256:0: brfs: File read: /mfs/sd/u-boot.bin MESS:00:00:07.486726:0: Loading 'u-boot.bin' to 0x8000 size 0x84cf4 MESS:00:00:07.492726:0: Device tree loaded to 0x2eff3100 (size 0xce24) MESS:00:00:07.500863:0: uart: Set PL011 baud rate to 103448.300000 Hz MESS:00:00:07.508031:0: uart: Baud rate change done... MESS:00:00:07.510053:0: U-Boot 2021.04-rc2 (Feb 25 2021 - 11:21:44 +0100) DRAM: 948 MiB RPI 4 Model B (0xa03111) MMC: mmcnr@7e300000: 1, emmc2@7e340000: 0 Loading Environment from FAT... OK In: serial Out: serial Err: serial Net: eth0: ethernet@7d580000 Hit any key to stop autoboot: 0 U-Boot> pci enum PCIe BRCM: link up, 5.0 Gbps x1 (SSC) U-Boot> usb start starting USB... Bus xhci_pci: Host not halted after 16000 microseconds. probe failed, error -16 No working controllers found U-Boot> Is it a known issue? In ARM64 mode everything works fine, but this not very surprising, because the firmware change in the mentioned commit is related to the ARM 32bit mode. Does anyone have an idea how to fix this issue? I've checked also the latest version of the RPi firmware, but the issue is still there. Best regards -- Marek Szyprowski, PhD Samsung R&D Institute Poland

3 4

[PATCH] board: freescale: t1028xrdb: Add MAINTAINER for revD
by Priyanka Jain 17 Jun '21

17 Jun '21

Add Priyanka Jain as MAINTAINER for T2080RDB_revD_defconfig, T2080RDB_revD_NAND_defconfig, T2080RDB_revD_SDCARD_defconfig and T2080RDB_revD_SPIFLASH_defconfig Signed-off-by: Priyanka Jain <priyanka.jain(a)nxp.com> --- board/freescale/t208xrdb/MAINTAINERS | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/board/freescale/t208xrdb/MAINTAINERS b/board/freescale/t208xrdb/MAINTAINERS index f894f77b73..6e9b25fa04 100644 --- a/board/freescale/t208xrdb/MAINTAINERS +++ b/board/freescale/t208xrdb/MAINTAINERS @@ -8,6 +8,10 @@ F: configs/T2080RDB_NAND_defconfig F: configs/T2080RDB_SDCARD_defconfig F: configs/T2080RDB_SPIFLASH_defconfig F: configs/T2080RDB_SRIO_PCIE_BOOT_defconfig +F: configs/T2080RDB_revD_defconfig +F: configs/T2080RDB_revD_NAND_defconfig +F: configs/T2080RDB_revD_SDCARD_defconfig +F: configs/T2080RDB_revD_SPIFLASH_defconfig T2080RDB_SECURE_BOOT BOARD M: Ruchika Gupta <ruchika.gupta(a)nxp.com> -- 2.17.1

1 0

[PATCH v2] armv8: lx2160ardb: Add thermal node fixup for revc board
by Wasim Khan 17 Jun '21

17 Jun '21

From: Wasim Khan <wasim.khan(a)nxp.com> lx2160ardb Rev-C board has i2c node for thermal monitors connected to different chip offset. Add device tree fixup to use lx2160ardb dts and apply thernal node fixups for lx2160ardb Rev-C board. Signed-off-by: Wasim Khan <wasim.khan(a)nxp.com> --- Changes in v2: - Fix compilation warnings for lx2160aqds board/freescale/lx2160a/lx2160a.c | 121 +++++++++++++++++++++++++++++- 1 file changed, 120 insertions(+), 1 deletion(-) diff --git a/board/freescale/lx2160a/lx2160a.c b/board/freescale/lx2160a/lx2160a.c index 47a7024f33..b5cf45e9b4 100644 --- a/board/freescale/lx2160a/lx2160a.c +++ b/board/freescale/lx2160a/lx2160a.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0+ /* - * Copyright 2018-2020 NXP + * Copyright 2018-2021 NXP */ #include <common.h> @@ -726,6 +726,116 @@ void board_quiesce_devices(void) } #endif +#if CONFIG_IS_ENABLED(TARGET_LX2160ARDB) +int fdt_fixup_add_thermal(void *blob, int mux_node, int channel, int reg) +{ + int err; + int noff; + int offset; + char channel_node_name[50]; + char thermal_node_name[50]; + u32 phandle; + + snprintf(channel_node_name, sizeof(channel_node_name), + "i2c@%x", channel); + debug("channel_node_name = %s\n", channel_node_name); + + snprintf(thermal_node_name, sizeof(thermal_node_name), + "temperature-sensor@%x", reg); + debug("thermal_node_name = %s\n", thermal_node_name); + + err = fdt_increase_size(blob, 200); + if (err) { + printf("fdt_increase_size: err=%s\n", fdt_strerror(err)); + return err; + } + + noff = fdt_subnode_offset(blob, mux_node, (const char *) + channel_node_name); + if (noff < 0) { + /* channel node not found - create it */ + noff = fdt_add_subnode(blob, mux_node, channel_node_name); + if (noff < 0) { + printf("fdt_add_subnode: err=%s\n", fdt_strerror(err)); + return err; + } + fdt_setprop_u32 (blob, noff, "#address-cells", 1); + fdt_setprop_u32 (blob, noff, "#size-cells", 0); + fdt_setprop_u32 (blob, noff, "reg", channel); + } + + /* Create thermal node*/ + offset = fdt_add_subnode(blob, noff, thermal_node_name); + fdt_setprop(blob, offset, "compatible", "nxp,sa56004", + strlen("nxp,sa56004") + 1); + fdt_setprop_u32 (blob, offset, "reg", reg); + + /* fixup phandle*/ + noff = fdt_node_offset_by_compatible(blob, -1, "regulator-fixed"); + if (noff < 0) { + printf("%s : failed to get phandle\n", __func__); + return noff; + } + phandle = fdt_get_phandle(blob, noff); + fdt_setprop_u32 (blob, offset, "vcc-supply", phandle); + + return 0; +} + +void fdt_fixup_delete_thermal(void *blob, int mux_node, int channel, int reg) +{ + int node; + int value; + int err; + int subnode; + + fdt_for_each_subnode(subnode, blob, mux_node) { + value = fdtdec_get_uint(blob, subnode, "reg", -1); + if (value == channel) { + /* delete thermal node */ + fdt_for_each_subnode(node, blob, subnode) { + value = fdtdec_get_uint(blob, node, "reg", -1); + err = fdt_node_check_compatible(blob, node, + "nxp,sa56004"); + if (!err && value == reg) { + fdt_del_node(blob, node); + break; + } + } + } + } +} + +void fdt_fixup_i2c_thermal_node(void *blob) +{ + int i2coffset; + int mux_node; + int reg; + int err; + + i2coffset = fdt_node_offset_by_compat_reg(blob, "fsl,vf610-i2c", + 0x2000000); + if (i2coffset != -FDT_ERR_NOTFOUND) { + fdt_for_each_subnode(mux_node, blob, i2coffset) { + reg = fdtdec_get_uint(blob, mux_node, "reg", -1); + err = fdt_node_check_compatible(blob, mux_node, + "nxp,pca9547"); + if (!err && reg == 0x77) { + fdt_fixup_delete_thermal(blob, mux_node, + 0x3, 0x4d); + err = fdt_fixup_add_thermal(blob, mux_node, + 0x3, 0x48); + if (err) + printf("%s: Add thermal node failed\n", + __func__); + } + } + } else { + printf("%s: i2c node not found\n", __func__); + } +} +#endif + #ifdef CONFIG_OF_BOARD_SETUP int ft_board_setup(void *blob, struct bd_info *bd) { @@ -737,6 +847,9 @@ int ft_board_setup(void *blob, struct bd_info *bd) u64 mc_memory_base = 0; u64 mc_memory_size = 0; u16 total_memory_banks; +#if CONFIG_IS_ENABLED(TARGET_LX2160ARDB) + u8 board_rev; +#endif ft_cpu_setup(blob, bd); @@ -791,6 +904,12 @@ int ft_board_setup(void *blob, struct bd_info *bd) #endif fdt_fixup_icid(blob); +#if CONFIG_IS_ENABLED(TARGET_LX2160ARDB) + board_rev = (QIXIS_READ(arch) & 0xf) - 1 + 'A'; + if (board_rev == 'C') + fdt_fixup_i2c_thermal_node(blob); +#endif + return 0; } #endif -- 2.25.1

1 0

[PATCH v2 0/4] board: fsl: lx2160ardb: add networking support for RevC
by Ioana Ciornei 17 Jun '21

17 Jun '21

This patch set adds networking support for the LX2160A-RDB revC board. The main difference is that the 10G Aquantia PHYs are at different MDIO bus addresses. To address this, the u-boot's DTS (in case of DM_ETH) and the kernel's DTS need to undergo a fixup. This patch set applies cleanly on top of the following, yet unnaccepted, patch: https://patchwork.ozlabs.org/project/uboot/patch/20210417180332.1164345-1-w… Changes in v2: - in 1/4: trigger the i2c node fixup if the board rev is 'C' or greater Florin Chiculita (3): board: fsl: lx2160ardb: add api for obtaining board revision board: fsl: lx2160ardb: add support for lx2160ardb revC board board: fsl: lx2160ardb: add dts fixup function for RevC Ioana Ciornei (1): board: fsl: lx2160ardb: add dts fixup for RevC board/freescale/lx2160a/eth_lx2160ardb.c | 160 ++++++++++++++++++++++- board/freescale/lx2160a/lx2160a.c | 21 ++- board/freescale/lx2160a/lx2160a.h | 7 +- include/configs/lx2160ardb.h | 5 +- 4 files changed, 186 insertions(+), 7 deletions(-) -- 2.17.1

2 6

[PATCH] armv8: lx2160ardb: Add thermal node fixup for revc board
by Wasim Khan 17 Jun '21

17 Jun '21

From: Wasim Khan <wasim.khan(a)nxp.com> lx2160ardb Rev-C board has i2c node for thermal monitors connected to different chip offset. Add device tree fixup to use lx2160ardb dts and apply thernal node fixups for lx2160ardb Rev-C board. Signed-off-by: Wasim Khan <wasim.khan(a)nxp.com> --- board/freescale/lx2160a/lx2160a.c | 119 +++++++++++++++++++++++++++++- 1 file changed, 118 insertions(+), 1 deletion(-) diff --git a/board/freescale/lx2160a/lx2160a.c b/board/freescale/lx2160a/lx2160a.c index 47a7024f33..8f75b48f95 100644 --- a/board/freescale/lx2160a/lx2160a.c +++ b/board/freescale/lx2160a/lx2160a.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0+ /* - * Copyright 2018-2020 NXP + * Copyright 2018-2021 NXP */ #include <common.h> @@ -726,6 +726,116 @@ void board_quiesce_devices(void) } #endif +#if CONFIG_IS_ENABLED(TARGET_LX2160ARDB) +int fdt_fixup_add_thermal(void *blob, int mux_node, int channel, int reg) +{ + int err; + int noff; + int offset; + char channel_node_name[50]; + char thermal_node_name[50]; + u32 phandle; + + snprintf(channel_node_name, sizeof(channel_node_name), + "i2c@%x", channel); + debug("channel_node_name = %s\n", channel_node_name); + + snprintf(thermal_node_name, sizeof(thermal_node_name), + "temperature-sensor@%x", reg); + debug("thermal_node_name = %s\n", thermal_node_name); + + err = fdt_increase_size(blob, 200); + if (err) { + printf("fdt_increase_size: err=%s\n", fdt_strerror(err)); + return err; + } + + noff = fdt_subnode_offset(blob, mux_node, (const char *) + channel_node_name); + if (noff < 0) { + /* channel node not found - create it */ + noff = fdt_add_subnode(blob, mux_node, channel_node_name); + if (noff < 0) { + printf("fdt_add_subnode: err=%s\n", fdt_strerror(err)); + return err; + } + fdt_setprop_u32 (blob, noff, "#address-cells", 1); + fdt_setprop_u32 (blob, noff, "#size-cells", 0); + fdt_setprop_u32 (blob, noff, "reg", channel); + } + + /* Create thermal node*/ + offset = fdt_add_subnode(blob, noff, thermal_node_name); + fdt_setprop(blob, offset, "compatible", "nxp,sa56004", + strlen("nxp,sa56004") + 1); + fdt_setprop_u32 (blob, offset, "reg", reg); + + /* fixup phandle*/ + noff = fdt_node_offset_by_compatible(blob, -1, "regulator-fixed"); + if (noff < 0) { + printf("%s : failed to get phandle\n", __func__); + return noff; + } + phandle = fdt_get_phandle(blob, noff); + fdt_setprop_u32 (blob, offset, "vcc-supply", phandle); + + return 0; +} + +void fdt_fixup_delete_thermal(void *blob, int mux_node, int channel, int reg) +{ + int node; + int value; + int err; + int subnode; + + fdt_for_each_subnode(subnode, blob, mux_node) { + value = fdtdec_get_uint(blob, subnode, "reg", -1); + if (value == channel) { + /* delete thermal node */ + fdt_for_each_subnode(node, blob, subnode) { + value = fdtdec_get_uint(blob, node, "reg", -1); + err = fdt_node_check_compatible(blob, node, + "nxp,sa56004"); + if (!err && value == reg) { + fdt_del_node(blob, node); + break; + } + } + } + } +} + +void fdt_fixup_i2c_thermal_node(void *blob) +{ + int i2coffset; + int mux_node; + int reg; + int err; + + i2coffset = fdt_node_offset_by_compat_reg(blob, "fsl,vf610-i2c", + 0x2000000); + if (i2coffset != -FDT_ERR_NOTFOUND) { + fdt_for_each_subnode(mux_node, blob, i2coffset) { + reg = fdtdec_get_uint(blob, mux_node, "reg", -1); + err = fdt_node_check_compatible(blob, mux_node, + "nxp,pca9547"); + if (!err && reg == 0x77) { + fdt_fixup_delete_thermal(blob, mux_node, + 0x3, 0x4d); + err = fdt_fixup_add_thermal(blob, mux_node, + 0x3, 0x48); + if (err) + printf("%s: Add thermal node failed\n", + __func__); + } + } + } else { + printf("%s: i2c node not found\n", __func__); + } +} +#endif + #ifdef CONFIG_OF_BOARD_SETUP int ft_board_setup(void *blob, struct bd_info *bd) { @@ -737,6 +847,7 @@ int ft_board_setup(void *blob, struct bd_info *bd) u64 mc_memory_base = 0; u64 mc_memory_size = 0; u16 total_memory_banks; + u8 board_rev; ft_cpu_setup(blob, bd); @@ -791,6 +902,12 @@ int ft_board_setup(void *blob, struct bd_info *bd) #endif fdt_fixup_icid(blob); +if (IS_ENABLED(CONFIG_TARGET_LX2160ARDB)) { + board_rev = (QIXIS_READ(arch) & 0xf) - 1 + 'A'; + if (board_rev == 'C') + fdt_fixup_i2c_thermal_node(blob); + } + return 0; } #endif -- 2.25.1

3 3