November 2019 - U-Boot

[U-Boot] [PATCH v2 0/2] Add Broadcom XHCI driver for iproc platforms
by Vladimir Olovyannikov 26 Nov '19

26 Nov '19

This patchset adds Broadcom XHCI driver for iproc platforms. This USB controller is based on the Broadcom USB3 IP Core. Supports USB2/3 functionality. Bharat Kumar Reddy Gooty (2): dt-bindings: Documentation on BRCM xHCI controller drivers: usb: host: Add BRCM xHCI driver .../bindings/usb/brcm,generic-xhci.txt | 12 ++ drivers/usb/host/Kconfig | 8 ++ drivers/usb/host/Makefile | 1 + drivers/usb/host/xhci-brcm.c | 105 ++++++++++++++++++ 4 files changed, 126 insertions(+) create mode 100644 Documentation/devicetree/bindings/usb/brcm,generic-xhci.txt create mode 100644 drivers/usb/host/xhci-brcm.c -- 2.17.1

1 2

[U-Boot] [PATCH v2 0/2] Add Broadcom XHCI driver for iproc platforms
by Vladimir Olovyannikov 26 Nov '19

26 Nov '19

This patchset adds Broadcom XHCI driver for iproc platforms. This USB controller is based on the Broadcom USB3 IP Core. Supports USB2/3 functionality. Bharat Kumar Reddy Gooty (2): dt-bindings: Documentation on BRCM xHCI controller drivers: usb: host: Add BRCM xHCI driver .../bindings/usb/brcm,generic-xhci.txt | 12 ++ drivers/usb/host/Kconfig | 8 ++ drivers/usb/host/Makefile | 1 + drivers/usb/host/xhci-brcm.c | 105 ++++++++++++++++++ 4 files changed, 126 insertions(+) create mode 100644 Documentation/devicetree/bindings/usb/brcm,generic-xhci.txt create mode 100644 drivers/usb/host/xhci-brcm.c -- 2.17.1

2 4

[U-Boot] [PATCH] ARM: mx6: pmu: Expose PMU LDO configuration interface
by Marek Vasut 26 Nov '19

26 Nov '19

Make the PMU LDO configuration interface available to board code, so that board code can reconfigure the internal LDOs of the SoC. Signed-off-by: Marek Vasut <marex(a)denx.de> Cc: Eric Nelson <eric(a)nelint.com> Cc: Fabio Estevam <fabio.estevam(a)nxp.com> Cc: Stefano Babic <sbabic(a)denx.de> --- arch/arm/include/asm/arch-mx6/sys_proto.h | 8 ++++++++ arch/arm/mach-imx/mx6/soc.c | 8 +------- 2 files changed, 9 insertions(+), 7 deletions(-) diff --git a/arch/arm/include/asm/arch-mx6/sys_proto.h b/arch/arm/include/asm/arch-mx6/sys_proto.h index 4bf7dff8b4..1e5fa1a75e 100644 --- a/arch/arm/include/asm/arch-mx6/sys_proto.h +++ b/arch/arm/include/asm/arch-mx6/sys_proto.h @@ -20,6 +20,14 @@ int imx6_pcie_toggle_power(void); int imx6_pcie_toggle_reset(void); +enum ldo_reg { + LDO_ARM, + LDO_SOC, + LDO_PU, +}; + +int set_ldo_voltage(enum ldo_reg ldo, u32 mv); + /** * iomuxc_set_rgmii_io_voltage - set voltage level of RGMII/USB pins * diff --git a/arch/arm/mach-imx/mx6/soc.c b/arch/arm/mach-imx/mx6/soc.c index 6dccee484c..3560dd7ee7 100644 --- a/arch/arm/mach-imx/mx6/soc.c +++ b/arch/arm/mach-imx/mx6/soc.c @@ -23,12 +23,6 @@ #include <imx_thermal.h> #include <mmc.h> -enum ldo_reg { - LDO_ARM, - LDO_SOC, - LDO_PU, -}; - struct scu_regs { u32 ctrl; u32 config; @@ -254,7 +248,7 @@ static void clear_ldo_ramp(void) * Possible values are from 0.725V to 1.450V in steps of * 0.025V (25mV). */ -static int set_ldo_voltage(enum ldo_reg ldo, u32 mv) +int set_ldo_voltage(enum ldo_reg ldo, u32 mv) { struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR; u32 val, step, old, reg = readl(&anatop->reg_core); -- 2.24.0

2 1

[U-Boot] [PATCH] drivers: optee: rpmb: fix returning CID to TEE
by Jorge Ramirez-Ortiz 26 Nov '19

26 Nov '19

The MMC CID value is one of the input parameters to unequivocally provision the the RPMB key. Before this patch, the value returned by the mmc driver in the Linux kernel differs from the one returned by uboot to optee. This means that if Linux provisions the RPMB key, uboot wont be able to access it (and the other way around). Fix it so both uboot and linux can access the RPMB partition independently of who provisions the key. Signed-off-by: Jorge Ramirez-Ortiz <jorge(a)foundries.io> --- drivers/tee/optee/rpmb.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/tee/optee/rpmb.c b/drivers/tee/optee/rpmb.c index 955155b3f8..5dbb1eae4a 100644 --- a/drivers/tee/optee/rpmb.c +++ b/drivers/tee/optee/rpmb.c @@ -98,6 +98,7 @@ static struct mmc *get_mmc(struct optee_private *priv, int dev_id) static u32 rpmb_get_dev_info(u16 dev_id, struct rpmb_dev_info *info) { struct mmc *mmc = find_mmc_device(dev_id); + int i; if (!mmc) return TEE_ERROR_ITEM_NOT_FOUND; @@ -105,7 +106,9 @@ static u32 rpmb_get_dev_info(u16 dev_id, struct rpmb_dev_info *info) if (!mmc->ext_csd) return TEE_ERROR_GENERIC; - memcpy(info->cid, mmc->cid, sizeof(info->cid)); + for (i = 0; i < ARRAY_SIZE(mmc->cid); i++) + ((u32 *) info->cid)[i] = be32_to_cpu(mmc->cid[i]); + info->rel_wr_sec_c = mmc->ext_csd[222]; info->rpmb_size_mult = mmc->ext_csd[168]; info->ret_code = RPMB_CMD_GET_DEV_INFO_RET_OK; -- 2.23.0

3 13

[U-Boot] [PATCH v2 0/4] arm64: dts: sun50i: Add support for Orange Pi 3
by Andre Heider 26 Nov '19

26 Nov '19

Changes since v1: * add CONFIG_FIXUP_BDADDR so fixing up a bdaddr is reusable * try to use "bdaddr" first, then fall back to generating an address Notes: * the kernel patch for btbcm to accept the "local-bd-address" property just hit mainline. Andre Heider (4): sunxi: board: Use eth_env_set_enetaddr_by_index() arm: sunxi: add a config option to fixup a Bluetooth address arm64: dts: sync Allwinner H6 files arm64: dts: sun50i: Add support for Orange Pi 3 arch/arm/dts/Makefile | 1 + arch/arm/dts/sun50i-h6-beelink-gs1.dts | 27 +++ arch/arm/dts/sun50i-h6-orangepi-3.dts | 287 +++++++++++++++++++++++++ arch/arm/dts/sun50i-h6-orangepi.dtsi | 4 + arch/arm/dts/sun50i-h6-pine-h64.dts | 4 + arch/arm/dts/sun50i-h6.dtsi | 137 ++++++++++-- arch/arm/mach-sunxi/Kconfig | 12 ++ board/sunxi/MAINTAINERS | 5 + board/sunxi/board.c | 40 +++- configs/orangepi_3_defconfig | 18 ++ 10 files changed, 509 insertions(+), 26 deletions(-) create mode 100644 arch/arm/dts/sun50i-h6-orangepi-3.dts create mode 100644 configs/orangepi_3_defconfig -- 2.24.0

2 11

[U-Boot] [PATCH] arm64: lx2160a: dts: Fix UART node status
by Vabhav Sharma 26 Nov '19

26 Nov '19

LX2160A PL011 UART driver fetch IP block values using platform data from board file instead of device tree. Modified UART nodes in device tree to disable state. Signed-off-by: Vabhav Sharma <vabhav.sharma(a)nxp.com> --- arch/arm/dts/fsl-lx2160a.dtsi | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/dts/fsl-lx2160a.dtsi b/arch/arm/dts/fsl-lx2160a.dtsi index a189333..9d018ca 100644 --- a/arch/arm/dts/fsl-lx2160a.dtsi +++ b/arch/arm/dts/fsl-lx2160a.dtsi @@ -127,12 +127,14 @@ compatible = "arm,pl011"; reg = <0x0 0x21c0000 0x0 0x1000>; clocks = <&clockgen 4 0>; + status = "disabled"; }; uart1: serial@21d0000 { compatible = "arm,pl011"; reg = <0x0 0x21d0000 0x0 0x1000>; clocks = <&clockgen 4 0>; + status = "disabled"; }; uart2: serial@21e0000 { -- 2.7.4

1 0

[U-Boot] [PATCH] net: Always build the string_to_enetaddr() helper
by Joe Hershberger 26 Nov '19

26 Nov '19

Part of the env cleanup moved this out of the environment code and into the net code. However, this helper is sometimes needed even when the net stack isn't included. Move the helper to lib/net_utils.c like it's similarly-purposed string_to_ip(). Also rename the moved function to similar naming. Signed-off-by: Joe Hershberger <joe.hershberger(a)ni.com> Reported-by: Ondrej Jirman <megous(a)megous.com> --- arch/arm/mach-tegra/cboot.c | 2 +- board/renesas/sh7752evb/sh7752evb.c | 2 +- board/renesas/sh7753evb/sh7753evb.c | 2 +- board/renesas/sh7757lcr/sh7757lcr.c | 4 ++-- cmd/ethsw.c | 2 +- cmd/nvedit.c | 2 +- doc/README.enetaddr | 4 ++-- include/net.h | 24 +++++++++++++----------- lib/net_utils.c | 15 +++++++++++++++ net/eth-uclass.c | 2 +- net/eth_legacy.c | 2 +- net/net.c | 12 ------------ 12 files changed, 39 insertions(+), 34 deletions(-) diff --git a/arch/arm/mach-tegra/cboot.c b/arch/arm/mach-tegra/cboot.c index 0433081c6c..0762144ecf 100644 --- a/arch/arm/mach-tegra/cboot.c +++ b/arch/arm/mach-tegra/cboot.c @@ -495,7 +495,7 @@ static int cboot_get_ethaddr_legacy(const void *fdt, uint8_t mac[ETH_ALEN]) return -ENOENT; } - eth_parse_enetaddr(prop, mac); + string_to_enetaddr(prop, mac); if (!is_valid_ethaddr(mac)) { printf("Invalid MAC address: %s\n", prop); diff --git a/board/renesas/sh7752evb/sh7752evb.c b/board/renesas/sh7752evb/sh7752evb.c index d0b850f35d..b4292b22e7 100644 --- a/board/renesas/sh7752evb/sh7752evb.c +++ b/board/renesas/sh7752evb/sh7752evb.c @@ -93,7 +93,7 @@ static void set_mac_to_sh_giga_eth_register(int channel, char *mac_string) unsigned char mac[6]; unsigned long val; - eth_parse_enetaddr(mac_string, mac); + string_to_enetaddr(mac_string, mac); if (!channel) ether = GETHER0_MAC_BASE; diff --git a/board/renesas/sh7753evb/sh7753evb.c b/board/renesas/sh7753evb/sh7753evb.c index e1bed7dcc3..5aebb041b0 100644 --- a/board/renesas/sh7753evb/sh7753evb.c +++ b/board/renesas/sh7753evb/sh7753evb.c @@ -100,7 +100,7 @@ static void set_mac_to_sh_giga_eth_register(int channel, char *mac_string) unsigned char mac[6]; unsigned long val; - eth_parse_enetaddr(mac_string, mac); + string_to_enetaddr(mac_string, mac); if (!channel) ether = GETHER0_MAC_BASE; diff --git a/board/renesas/sh7757lcr/sh7757lcr.c b/board/renesas/sh7757lcr/sh7757lcr.c index d2671202e9..662c435f7a 100644 --- a/board/renesas/sh7757lcr/sh7757lcr.c +++ b/board/renesas/sh7757lcr/sh7757lcr.c @@ -140,7 +140,7 @@ static void set_mac_to_sh_eth_register(int channel, char *mac_string) unsigned char mac[6]; unsigned long val; - eth_parse_enetaddr(mac_string, mac); + string_to_enetaddr(mac_string, mac); if (!channel) ether = ETHER0_MAC_BASE; @@ -159,7 +159,7 @@ static void set_mac_to_sh_giga_eth_register(int channel, char *mac_string) unsigned char mac[6]; unsigned long val; - eth_parse_enetaddr(mac_string, mac); + string_to_enetaddr(mac_string, mac); if (!channel) ether = GETHER0_MAC_BASE; diff --git a/cmd/ethsw.c b/cmd/ethsw.c index 8846805799..8d271ce1f3 100644 --- a/cmd/ethsw.c +++ b/cmd/ethsw.c @@ -864,7 +864,7 @@ static int keyword_match_mac_addr(enum ethsw_keyword_id key_id, int argc, return 0; } - eth_parse_enetaddr(argv[*argc_nr + 1], parsed_cmd->ethaddr); + string_to_enetaddr(argv[*argc_nr + 1], parsed_cmd->ethaddr); if (is_broadcast_ethaddr(parsed_cmd->ethaddr)) { memset(parsed_cmd->ethaddr, 0xFF, sizeof(parsed_cmd->ethaddr)); diff --git a/cmd/nvedit.c b/cmd/nvedit.c index 1cb0bc1460..1e4b225a94 100644 --- a/cmd/nvedit.c +++ b/cmd/nvedit.c @@ -360,7 +360,7 @@ ulong env_get_hex(const char *varname, ulong default_val) int eth_env_get_enetaddr(const char *name, uint8_t *enetaddr) { - eth_parse_enetaddr(env_get(name), enetaddr); + string_to_enetaddr(env_get(name), enetaddr); return is_valid_ethaddr(enetaddr); } diff --git a/doc/README.enetaddr b/doc/README.enetaddr index f926485986..5baa9f2179 100644 --- a/doc/README.enetaddr +++ b/doc/README.enetaddr @@ -76,12 +76,12 @@ To assist in the management of these layers, a few helper functions exist. You should use these rather than attempt to do any kind of parsing/manipulation yourself as many common errors have arisen in the past. - * void eth_parse_enetaddr(const char *addr, uchar *enetaddr); + * void string_to_enetaddr(const char *addr, uchar *enetaddr); Convert a string representation of a MAC address to the binary version. char *addr = "00:11:22:33:44:55"; uchar enetaddr[6]; -eth_parse_enetaddr(addr, enetaddr); +string_to_enetaddr(addr, enetaddr); /* enetaddr now equals { 0x00, 0x11, 0x22, 0x33, 0x44, 0x55 } */ * int eth_env_get_enetaddr(char *name, uchar *enetaddr); diff --git a/include/net.h b/include/net.h index 75a16e4c8f..d054c5f694 100644 --- a/include/net.h +++ b/include/net.h @@ -825,6 +825,19 @@ static inline void net_random_ethaddr(uchar *addr) addr[0] |= 0x02; /* set local assignment bit (IEEE802) */ } +/** + * string_to_enetaddr() - Parse a MAC address + * + * Convert a string MAC address + * + * Implemented in lib/net_utils.c (built unconditionally) + * + * @addr: MAC address in aa:bb:cc:dd:ee:ff format, where each part is a 2-digit + * hex value + * @enetaddr: Place to put MAC address (6 bytes) + */ +void string_to_enetaddr(const char *addr, uint8_t *enetaddr); + /* Convert an IP address to a string */ void ip_to_string(struct in_addr x, char *s); @@ -875,15 +888,4 @@ int update_tftp(ulong addr, char *interface, char *devstring); /**********************************************************************/ -/** - * eth_parse_enetaddr() - Parse a MAC address - * - * Convert a string MAC address - * - * @addr: MAC address in aa:bb:cc:dd:ee:ff format, where each part is a 2-digit - * hex value - * @enetaddr: Place to put MAC address (6 bytes) - */ -void eth_parse_enetaddr(const char *addr, uint8_t *enetaddr); - #endif /* __NET_H__ */ diff --git a/lib/net_utils.c b/lib/net_utils.c index 9fb9d4a4b0..ed5044c3de 100644 --- a/lib/net_utils.c +++ b/lib/net_utils.c @@ -41,3 +41,18 @@ struct in_addr string_to_ip(const char *s) addr.s_addr = htonl(addr.s_addr); return addr; } + +void string_to_enetaddr(const char *addr, uint8_t *enetaddr) +{ + char *end; + int i; + + if (!enetaddr) + return; + + for (i = 0; i < 6; ++i) { + enetaddr[i] = addr ? simple_strtoul(addr, &end, 16) : 0; + if (addr) + addr = (*end) ? end + 1 : end; + } +} diff --git a/net/eth-uclass.c b/net/eth-uclass.c index 3bd98b01ad..9fe4096120 100644 --- a/net/eth-uclass.c +++ b/net/eth-uclass.c @@ -227,7 +227,7 @@ static int on_ethaddr(const char *name, const char *value, enum env_op op, switch (op) { case env_op_create: case env_op_overwrite: - eth_parse_enetaddr(value, pdata->enetaddr); + string_to_enetaddr(value, pdata->enetaddr); eth_write_hwaddr(dev); break; case env_op_delete: diff --git a/net/eth_legacy.c b/net/eth_legacy.c index 41f5263526..5d6b0d7d7f 100644 --- a/net/eth_legacy.c +++ b/net/eth_legacy.c @@ -117,7 +117,7 @@ static int on_ethaddr(const char *name, const char *value, enum env_op op, switch (op) { case env_op_create: case env_op_overwrite: - eth_parse_enetaddr(value, dev->enetaddr); + string_to_enetaddr(value, dev->enetaddr); eth_write_hwaddr(dev, "eth", dev->index); break; case env_op_delete: diff --git a/net/net.c b/net/net.c index ded86e7456..4d2b7ead3b 100644 --- a/net/net.c +++ b/net/net.c @@ -1628,15 +1628,3 @@ ushort env_get_vlan(char *var) { return string_to_vlan(env_get(var)); } - -void eth_parse_enetaddr(const char *addr, uint8_t *enetaddr) -{ - char *end; - int i; - - for (i = 0; i < 6; ++i) { - enetaddr[i] = addr ? simple_strtoul(addr, &end, 16) : 0; - if (addr) - addr = (*end) ? end + 1 : end; - } -} -- 2.11.0

5 10

[U-Boot] [PATCH v7 00/19] Add Intel Agilex SoC support
by Ley Foon Tan 26 Nov '19

26 Nov '19

This is 7th version of patchset to add Intel Agilex SoC[1] support. This patchset needs to apply after patchset in [2] for manager driver struct to defines conversion and [3] for enable cache driver build in SPL. Patch status: Have changes: Patch 17, 19 Other patches unchanged. Detail changelog can find in commit message. Intel Agilex SoC is with a 64-bit quad core ARM Cortex-A53 MPCore hard processor system (HPS). New IPs in Agilex are CCU, clock manager and SDRAM, other IPs have minor changes compared to Stratix 10. Intel Agilex HPS TRM: https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/hb… v6->v7: ------- Patch 17: - Update socfpga_agilex.dtsi and socfpga_agilex_socdk.dts from Linux. - Add new socfpga_agilex_socdk-u-boot.dts file for Uboot specific DT properties. Patch 19: - Move CONFIG_DW_WDT_CLOCK_KHZ to _soc64_common.h - Use fdtimage filename from CONFIG_DEFAULT_DEVICE_TREE History: --------- [v1]: https://patchwork.ozlabs.org/cover/1097830/ [v2]: https://patchwork.ozlabs.org/cover/1127440/ [v3]: https://patchwork.ozlabs.org/cover/1149863/ [v4]: https://patchwork.ozlabs.org/cover/1161483/ [v5]: https://patchwork.ozlabs.org/cover/1175076/ [v6]: https://patchwork.ozlabs.org/cover/1191577/ [1]: https://www.intel.com/content/www/us/en/products/programmable/fpga/agilex.h… [2]: https://patchwork.ozlabs.org/cover/1191562/ ("arm: socfpga: Convert drivers from struct to defines") [3]: https://patchwork.ozlabs.org/patch/1191569/ ("spl: Allow cache drivers to be used in SPL") Ley Foon Tan (19): arm: socfpga: agilex: Add base address for Intel Agilex SoC arm: socfpga: Move firewall code to firewall file arm: socfpga: Move Stratix10 and Agilex reset manager common code arm: socfpga: agilex: Add reset manager support arm: socfpga: Move Stratix10 and Agilex system manager common code arm: socfpga: agilex: Add system manager support arm: socfpga: Move Stratix10 and Agilex clock manager common code arm: socfpga: Fix CLKMGR_INTOSC_HZ to 400MHz clk: agilex: Add clock driver for Agilex arm: socfpga: agilex: Add clock wrapper functions cache: Add Arteris Ncore cache coherent unit driver arm: agilex: Add clock handoff offset for Agilex ddr: altera: Restructure Stratix 10 SDRAM driver ddr: altera: agilex: Add SDRAM driver for Agilex board: intel: agilex: Add socdk board support for Intel Agilex SoC arm: socfpga: agilex: Add SPL for Agilex SoC arm: dts: agilex: Add base dtsi and devkit dts configs: socfpga: Move Stratix10 and Agilex common CONFIGs arm: socfpga: agilex: Enable Agilex SoC build arch/arm/Kconfig | 4 +- arch/arm/dts/Makefile | 1 + arch/arm/dts/socfpga_agilex-u-boot.dtsi | 96 +++ arch/arm/dts/socfpga_agilex.dtsi | 622 ++++++++++++++++++ arch/arm/dts/socfpga_agilex_socdk-u-boot.dtsi | 37 ++ arch/arm/dts/socfpga_agilex_socdk.dts | 142 ++++ arch/arm/mach-socfpga/Kconfig | 16 + arch/arm/mach-socfpga/Makefile | 17 + arch/arm/mach-socfpga/clock_manager_agilex.c | 85 +++ arch/arm/mach-socfpga/clock_manager_s10.c | 3 +- .../mach-socfpga/{spl_s10.c => firewall.c} | 122 +--- .../mach-socfpga/include/mach/base_addr_s10.h | 4 + .../mach-socfpga/include/mach/clock_manager.h | 2 + .../include/mach/clock_manager_agilex.h | 14 + .../include/mach/clock_manager_s10.h | 16 +- .../include/mach/clock_manager_soc64.h | 21 + .../mach/{firewall_s10.h => firewall.h} | 10 +- .../mach-socfpga/include/mach/handoff_s10.h | 9 +- .../mach-socfpga/include/mach/reset_manager.h | 5 +- .../include/mach/reset_manager_s10.h | 95 --- .../include/mach/reset_manager_soc64.h | 38 ++ .../include/mach/system_manager.h | 5 +- .../include/mach/system_manager_s10.h | 124 ---- .../include/mach/system_manager_soc64.h | 123 ++++ arch/arm/mach-socfpga/mailbox_s10.c | 2 +- arch/arm/mach-socfpga/misc.c | 5 + arch/arm/mach-socfpga/misc_s10.c | 2 +- arch/arm/mach-socfpga/reset_manager_s10.c | 35 +- arch/arm/mach-socfpga/spl_agilex.c | 98 +++ arch/arm/mach-socfpga/spl_s10.c | 95 +-- arch/arm/mach-socfpga/system_manager_s10.c | 26 +- arch/arm/mach-socfpga/wrap_pll_config_s10.c | 15 +- board/intel/agilex-socdk/MAINTAINERS | 7 + board/intel/agilex-socdk/Makefile | 7 + board/intel/agilex-socdk/socfpga.c | 7 + configs/socfpga_agilex_defconfig | 60 ++ drivers/cache/Kconfig | 8 + drivers/cache/Makefile | 1 + drivers/cache/cache-ncore.c | 164 +++++ drivers/clk/altera/Makefile | 1 + drivers/clk/altera/clk-agilex.c | 579 ++++++++++++++++ drivers/clk/altera/clk-agilex.h | 237 +++++++ drivers/ddr/altera/Kconfig | 6 +- drivers/ddr/altera/Makefile | 3 +- drivers/ddr/altera/sdram_agilex.c | 168 +++++ drivers/ddr/altera/sdram_s10.c | 298 +-------- drivers/ddr/altera/sdram_s10.h | 148 +---- drivers/ddr/altera/sdram_soc64.c | 304 +++++++++ .../ddr/altera/{sdram_s10.h => sdram_soc64.h} | 71 +- include/configs/socfpga_agilex_socdk.h | 12 + ...ratix10_socdk.h => socfpga_soc64_common.h} | 14 +- include/configs/socfpga_stratix10_socdk.h | 193 +----- include/dt-bindings/clock/agilex-clock.h | 71 ++ 53 files changed, 3090 insertions(+), 1158 deletions(-) create mode 100644 arch/arm/dts/socfpga_agilex-u-boot.dtsi create mode 100644 arch/arm/dts/socfpga_agilex.dtsi create mode 100644 arch/arm/dts/socfpga_agilex_socdk-u-boot.dtsi create mode 100644 arch/arm/dts/socfpga_agilex_socdk.dts create mode 100644 arch/arm/mach-socfpga/clock_manager_agilex.c copy arch/arm/mach-socfpga/{spl_s10.c => firewall.c} (53%) create mode 100644 arch/arm/mach-socfpga/include/mach/clock_manager_agilex.h create mode 100644 arch/arm/mach-socfpga/include/mach/clock_manager_soc64.h rename arch/arm/mach-socfpga/include/mach/{firewall_s10.h => firewall.h} (94%) delete mode 100644 arch/arm/mach-socfpga/include/mach/reset_manager_s10.h create mode 100644 arch/arm/mach-socfpga/include/mach/reset_manager_soc64.h delete mode 100644 arch/arm/mach-socfpga/include/mach/system_manager_s10.h create mode 100644 arch/arm/mach-socfpga/include/mach/system_manager_soc64.h create mode 100644 arch/arm/mach-socfpga/spl_agilex.c create mode 100644 board/intel/agilex-socdk/MAINTAINERS create mode 100644 board/intel/agilex-socdk/Makefile create mode 100644 board/intel/agilex-socdk/socfpga.c create mode 100644 configs/socfpga_agilex_defconfig create mode 100644 drivers/cache/cache-ncore.c create mode 100644 drivers/clk/altera/clk-agilex.c create mode 100644 drivers/clk/altera/clk-agilex.h create mode 100644 drivers/ddr/altera/sdram_agilex.c create mode 100644 drivers/ddr/altera/sdram_soc64.c copy drivers/ddr/altera/{sdram_s10.h => sdram_soc64.h} (79%) create mode 100644 include/configs/socfpga_agilex_socdk.h copy include/configs/{socfpga_stratix10_socdk.h => socfpga_soc64_common.h} (94%) create mode 100644 include/dt-bindings/clock/agilex-clock.h -- 2.19.0

4 23

[U-Boot] [GIT PULL] Raspberry Pi updates for v2020.01
by Matthias Brugger 26 Nov '19

26 Nov '19

Hi Tom, Please have a look at the below patches. Travis-ci can be found here: https://travis-ci.org/mbgg/u-boot/builds/614078145 Apart from this patches, I planning to send another pull request once the single binary series is ready to be merged. But for now, we should take this patches as it fixes some FAT write errors and the boot banner issue for RPi3 you detected. Regards, Matthias --- The following changes since commit d4a31e8ee5592072d8d5208b3e950cba2d89b6bd: Prepare v2020.01-rc3 (2019-11-18 21:31:49 -0500) are available in the Git repository at: https://github.com/mbgg/u-boot.git tags/rpi-next-2020.01 for you to fetch changes up to cf3a4dc5d12d2b635370795ec15996d3216c7ea3: drivers: bcm283x: Set pre-location flag for OF_BOARD (2019-11-19 16:29:15 +0100) ---------------------------------------------------------------- - enable DFU for RPi4 - fix fat write - add pinctrl upstream compatible for RPi4 - fix boot banner for RPi3 and RPi4 ---------------------------------------------------------------- Marek Szyprowski (6): fat: write: fix broken write to fragmented files fat: write: fix broken write at non-zero file offset dfu: mmc: rearrange the code dfu: mmc: remove file size limit for io operations usb: dwc2_udc_otg: add bcm2835 SoC (Raspberry Pi4) support config: enable DFU over USB on Raspberry Pi4 boards Matthias Brugger (4): pinctrl: bcm283x: Add compatible for RPi4 fdt: fix bcm283x dm-pre-reloc definitions arm: dts: bcm283x: Rename U-Boot file drivers: bcm283x: Set pre-location flag for OF_BOARD .../{bcm283x-uboot.dtsi => bcm283x-u-boot.dtsi} | 4 - configs/rpi_4_32b_defconfig | 11 +++ configs/rpi_4_defconfig | 11 +++ drivers/dfu/dfu_mmc.c | 93 +++++++++++++--------- drivers/pinctrl/broadcom/pinctrl-bcm283x.c | 3 +- drivers/serial/serial_bcm283x_mu.c | 2 +- drivers/serial/serial_bcm283x_pl011.c | 2 +- drivers/usb/gadget/dwc2_udc_otg.c | 2 + drivers/usb/gadget/dwc2_udc_otg_xfer_dma.c | 12 +-- fs/fat/fat_write.c | 18 ++--- include/configs/rpi.h | 20 +++++ 11 files changed, 120 insertions(+), 58 deletions(-) rename arch/arm/dts/{bcm283x-uboot.dtsi => bcm283x-u-boot.dtsi} (90%)

3 7

[U-Boot] imx8mq-evk boot regression
by Fabio Estevam 26 Nov '19

26 Nov '19

Hi, Just tried to boot imx8mq-evk using latest U-Boot master and this is what I get: U-Boot SPL 2020.01-rc3-00070-g9a0cbae22a (Nov 25 2019 - 13:08:24 -0300) PMIC: PFUZE100 ID=0x10 DDRINFO: start DRAM init DDRINFO:ddrphy calibration done DDRINFO: ddrmix config done Normal Boot Trying to boot from MMC2 (It hangs here) I haven't tried to debug this yet, but just wanted to let you know in case this is a known issue. Any ideas? Thanks, Fabio Estevam

2 4