November 2019 - U-Boot

[U-Boot] [PATCH] board: ti: dra7-evm: remove net platform code
by Grygorii Strashko 25 Nov '19

25 Nov '19

The DRA7 has DM_ETH and OF_CONTROL enabled, so remove networking platform code. Signed-off-by: Grygorii Strashko <grygorii.strashko(a)ti.com> --- board/ti/dra7xx/evm.c | 106 +----------------------------------------- 1 file changed, 1 insertion(+), 105 deletions(-) diff --git a/board/ti/dra7xx/evm.c b/board/ti/dra7xx/evm.c index 74d04bb1e3..b1e1e5403c 100644 --- a/board/ti/dra7xx/evm.c +++ b/board/ti/dra7xx/evm.c @@ -11,6 +11,7 @@ */ #include <common.h> #include <env.h> +#include <spl.h> #include <palmas.h> #include <sata.h> #include <linux/string.h> @@ -29,7 +30,6 @@ #include <dwc3-omap-uboot.h> #include <i2c.h> #include <ti-usb-phy-uboot.h> -#include <miiphy.h> #include "mux_data.h" #include "../common/board_detect.h" @@ -45,10 +45,6 @@ #define board_ti_get_emif_size() board_ti_get_emif1_size() + \ board_ti_get_emif2_size() -#ifdef CONFIG_DRIVER_TI_CPSW -#include <cpsw.h> -#endif - DECLARE_GLOBAL_DATA_PTR; /* GPIO 7_11 */ @@ -989,106 +985,6 @@ int spl_start_uboot(void) } #endif -#ifdef CONFIG_DRIVER_TI_CPSW -extern u32 *const omap_si_rev; - -static void cpsw_control(int enabled) -{ - /* VTP can be added here */ - - return; -} - -static struct cpsw_slave_data cpsw_slaves[] = { - { - .slave_reg_ofs = 0x208, - .sliver_reg_ofs = 0xd80, - .phy_addr = 2, - }, - { - .slave_reg_ofs = 0x308, - .sliver_reg_ofs = 0xdc0, - .phy_addr = 3, - }, -}; - -static struct cpsw_platform_data cpsw_data = { - .mdio_base = CPSW_MDIO_BASE, - .cpsw_base = CPSW_BASE, - .mdio_div = 0xff, - .channels = 8, - .cpdma_reg_ofs = 0x800, - .slaves = 2, - .slave_data = cpsw_slaves, - .ale_reg_ofs = 0xd00, - .ale_entries = 1024, - .host_port_reg_ofs = 0x108, - .hw_stats_reg_ofs = 0x900, - .bd_ram_ofs = 0x2000, - .mac_control = (1 << 5), - .control = cpsw_control, - .host_port_num = 0, - .version = CPSW_CTRL_VERSION_2, -}; - -int board_eth_init(bd_t *bis) -{ - int ret; - uint8_t mac_addr[6]; - uint32_t mac_hi, mac_lo; - uint32_t ctrl_val; - - /* try reading mac address from efuse */ - mac_lo = readl((*ctrl)->control_core_mac_id_0_lo); - mac_hi = readl((*ctrl)->control_core_mac_id_0_hi); - mac_addr[0] = (mac_hi & 0xFF0000) >> 16; - mac_addr[1] = (mac_hi & 0xFF00) >> 8; - mac_addr[2] = mac_hi & 0xFF; - mac_addr[3] = (mac_lo & 0xFF0000) >> 16; - mac_addr[4] = (mac_lo & 0xFF00) >> 8; - mac_addr[5] = mac_lo & 0xFF; - - if (!env_get("ethaddr")) { - printf("<ethaddr> not set. Validating first E-fuse MAC\n"); - - if (is_valid_ethaddr(mac_addr)) - eth_env_set_enetaddr("ethaddr", mac_addr); - } - - mac_lo = readl((*ctrl)->control_core_mac_id_1_lo); - mac_hi = readl((*ctrl)->control_core_mac_id_1_hi); - mac_addr[0] = (mac_hi & 0xFF0000) >> 16; - mac_addr[1] = (mac_hi & 0xFF00) >> 8; - mac_addr[2] = mac_hi & 0xFF; - mac_addr[3] = (mac_lo & 0xFF0000) >> 16; - mac_addr[4] = (mac_lo & 0xFF00) >> 8; - mac_addr[5] = mac_lo & 0xFF; - - if (!env_get("eth1addr")) { - if (is_valid_ethaddr(mac_addr)) - eth_env_set_enetaddr("eth1addr", mac_addr); - } - - ctrl_val = readl((*ctrl)->control_core_control_io1) & (~0x33); - ctrl_val |= 0x22; - writel(ctrl_val, (*ctrl)->control_core_control_io1); - - if (*omap_si_rev == DRA722_ES1_0) - cpsw_data.active_slave = 1; - - if (board_is_dra72x_revc_or_later()) { - cpsw_slaves[0].phy_if = PHY_INTERFACE_MODE_RGMII_ID; - cpsw_slaves[1].phy_if = PHY_INTERFACE_MODE_RGMII_ID; - } - - ret = cpsw_register(&cpsw_data); - if (ret < 0) - printf("Error %d registering CPSW switch\n", ret); - - return ret; -} -#endif - #ifdef CONFIG_BOARD_EARLY_INIT_F /* VTT regulator enable */ static inline void vtt_regulator_enable(void) -- 2.17.1

2 1

[U-Boot] [PATCH v2] configs: ls1028ardb: enable usb net r8152_eth
by Yinbo Zhu 25 Nov '19

25 Nov '19

Enable ls1028ardb usb net r8152_eth Signed-off-by: Yinbo Zhu <yinbo.zhu(a)nxp.com> --- configs/ls1028ardb_tfa_defconfig | 2 ++ 1 file changed, 2 insertions(+) diff --git a/configs/ls1028ardb_tfa_defconfig b/configs/ls1028ardb_tfa_defconfig index 1fab450..0664014 100644 --- a/configs/ls1028ardb_tfa_defconfig +++ b/configs/ls1028ardb_tfa_defconfig @@ -76,4 +76,6 @@ CONFIG_USB_XHCI_DWC3=y CONFIG_WDT=y CONFIG_WDT_SP805=y CONFIG_MMC_IO_VOLTAGE=y +CONFIG_USB_HOST_ETHER=y +CONFIG_USB_ETHER_RTL8152=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y -- 2.7.4

1 0

[U-Boot] [PATCH] Revert "video: mxsfb: Configure the clock after eLCDIF reset"
by Fabio Estevam 24 Nov '19

24 Nov '19

Commit ec3dcea74470 ("video: mxsfb: Configure the clock after eLCDIF reset") causes boot regression on imx7d-pico/imx7d-sdb boards, so revert it until a better solution is prepared. This reverts commit ec3dcea7447031463643c33143b3a5f027f0b54d. Reported-by: Joris Offouga <offougajoris(a)gmail.com> Signed-off-by: Fabio Estevam <festevam(a)gmail.com> --- drivers/video/mxsfb.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/video/mxsfb.c b/drivers/video/mxsfb.c index d73a8bac99..c52981053e 100644 --- a/drivers/video/mxsfb.c +++ b/drivers/video/mxsfb.c @@ -57,6 +57,9 @@ static void mxs_lcd_init(u32 fb_addr, struct ctfb_res_modes *mode, int bpp) uint32_t word_len = 0, bus_width = 0; uint8_t valid_data = 0; + /* Kick in the LCDIF clock */ + mxs_set_lcdclk(MXS_LCDIF_BASE, PS2KHZ(mode->pixclock)); + /* Restart the LCDIF block */ mxs_reset_block(&regs->hw_lcdif_ctrl_reg); @@ -127,9 +130,6 @@ static void mxs_lcd_init(u32 fb_addr, struct ctfb_res_modes *mode, int bpp) /* FIFO cleared */ writel(LCDIF_CTRL1_FIFO_CLEAR, &regs->hw_lcdif_ctrl1_clr); - /* Kick in the LCDIF clock */ - mxs_set_lcdclk(MXS_LCDIF_BASE, PS2KHZ(mode->pixclock)); - /* RUN! */ writel(LCDIF_CTRL_RUN, &regs->hw_lcdif_ctrl_set); } -- 2.17.1

2 1

[U-Boot] [PATCH 0/6] Introduce DSA Ethernet switch class and Felix driver
by Alex Marginean 24 Nov '19

24 Nov '19

DSA stands for Distributed Switch Architecture and it is a subsystem introduced in the Linux kernel to support switches that: - have an Ethernet link up to the CPU - use some form of tagging to identify the source/destination port for Rx/Tx - may be cascaded in tree-like structures. DSA is described in depth here: https://www.kernel.org/doc/Documentation/networking/dsa/dsa.txt >From the doc: Summarized, this is basically how DSA looks like from a network device perspective: |--------------------------- | CPU network device (eth0)| ---------------------------- | <tag added by switch | | | | | | tag added by CPU> | |--------------------------------------------| | Switch driver | |--------------------------------------------| || || || |-------| |-------| |-------| | sw0p0 | | sw0p1 | | sw0p2 | |-------| |-------| |-------| This patch set introduces a DSA class in U-Boot to support drivers of such switches. DSA drivers have to implement the following ops: - enable/disable of switch ports, - insert a tag in frames being transmitted, used by the switch to select the egress port, - parse a tag in frames being received, used for Rx traffic. DSA class code deals with presentation of switch ports as Ethernet interfaces, deals with the master Ethernet device for I/O and helps with parsing of the DT assuming the structure follows the DSA kernel binding. Support for switch cascading is not included yet. This patch set also introduces a driver for the Ethernet switch integrated into NXP LS1028A, called Felix. The switch has 4 front panel ports, I/O to/fom it is done though an ENETC Ethernet interface and meta-data is carried between the switch and the driver though an additional header pre-pended to the original frame. Network commands like tftp can be used on these front panel ports. The ports are disabled unless used so they do not cause issues on network topologies that include loops. Felix as seen on LS1028A RDB: => dm tree Class Index Probed Driver Name ----------------------------------------------------------- ...... dsa 0 [ + ] felix-switch | |-- felix-switch eth 4 [ + ] dsa-port | | |-- swp0 eth 5 [ + ] dsa-port | | |-- swp1 eth 6 [ + ] dsa-port | | |-- swp2 eth 7 [ + ] dsa-port | | `-- swp3 => mdio list ...... 10 - Vitesse VSC8514 <--> swp0 11 - Vitesse VSC8514 <--> swp1 12 - Vitesse VSC8514 <--> swp2 13 - Vitesse VSC8514 <--> swp3 => tftp 80000000 test Using swp2 device TFTP from server 192.168.100.1; our IP address is 192.168.100.100 Filename 'test'. Load address: 0x80000000 Loading: ################################################################# ################################################################# ######################################################## 6.8 MiB/s done Bytes transferred = 949880 (e7e78 hex) This patch set replaces this previous submission of the Felix driver: https://patchwork.ozlabs.org/project/uboot/list/?series=143126&state=* and depends on: https://patchwork.ozlabs.org/project/uboot/list/?series=142858 https://patchwork.ozlabs.org/project/uboot/list/?series=142879 Alex Marginean (6): net: introduce DSA class for Ethernet switches drivers: net: add a DSA sandbox driver test: dm: add a simple unit test for DSA class drivers: net: add Felix DSA switch driver arm: dts: ls1028a: adds Ethernet switch node and its dependencies configs: ls1028a: enable the Ethernet switch driver in defconfig arch/Kconfig | 1 + arch/arm/dts/fsl-ls1028a-rdb.dts | 36 ++ arch/arm/dts/fsl-ls1028a.dtsi | 41 +- arch/sandbox/dts/test.dts | 49 ++ configs/ls1028aqds_tfa_SECURE_BOOT_defconfig | 3 +- configs/ls1028aqds_tfa_defconfig | 3 +- configs/ls1028ardb_tfa_SECURE_BOOT_defconfig | 3 +- configs/ls1028ardb_tfa_defconfig | 3 +- drivers/net/Kconfig | 21 + drivers/net/Makefile | 1 + drivers/net/dsa_sandbox.c | 272 +++++++++++ drivers/net/fsl_enetc.h | 5 + drivers/net/mscc_eswitch/Kconfig | 8 + drivers/net/mscc_eswitch/Makefile | 1 + drivers/net/mscc_eswitch/felix_switch.c | 453 +++++++++++++++++++ include/configs/sandbox.h | 4 + include/dm/uclass-id.h | 1 + include/dsa.h | 132 ++++++ net/Makefile | 1 + net/dsa-uclass.c | 369 +++++++++++++++ test/dm/Makefile | 1 + test/dm/dsa.c | 58 +++ test/dm/test-fdt.c | 2 +- 23 files changed, 1462 insertions(+), 6 deletions(-) create mode 100644 drivers/net/dsa_sandbox.c create mode 100644 drivers/net/mscc_eswitch/felix_switch.c create mode 100644 include/dsa.h create mode 100644 net/dsa-uclass.c create mode 100644 test/dm/dsa.c -- 2.17.1

4 12

[U-Boot] Pico-imx7d and imx7d sabre Break on 2020.01-rc3
by Joris Offouga 24 Nov '19

24 Nov '19

Anatolij, Fabio I just compiled a fresh U-Boot with U-Boot master and It looks like commit f0b54d (video: mxsfb: Configure the clock after eLCDIF reset") [1] breaks my Pico-imx7d and imx7d-Sabre. see logs after: U-Boot 2020.01-rc3-00489-g47b48fe186 (Nov 24 2019 - 15:18:23 +0100) CPU: Freescale i.MX7D rev1.2 1000 MHz (running at 792 MHz) CPU: Commercial temperature grade (0C to 95C) at 36C Reset cause: POR Model: Freescale i.MX7 SabreSD Board Board: i.MX7D SABRESD in secure mode DRAM: 1 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK Video: 480x272x24 After revert it : U-Boot 2020.01-rc3-00490-g6bebc83c0a (Nov 24 2019 - 15:51:16 +0100) CPU: Freescale i.MX7D rev1.2 1000 MHz (running at 792 MHz) CPU: Commercial temperature grade (0C to 95C) at 36C Reset cause: POR Model: Freescale i.MX7 SabreSD Board Board: i.MX7D SABRESD in secure mode DRAM: 1 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK Video: 480x272x24 In: serial Out: serial Err: serial Net: FEC0 Hit any key to stop autoboot: 0 So, can you consider this commit 'not applicable' for next release ? [1]- https://gitlab.denx.de/u-boot/u-boot/commit/ec3dcea7447031463643c33143b3a5f… Best Regards, Joris

2 1

[U-Boot] [PATCH] armv8: layerscape: fix SPL multi DTB loading
by Michael Walle 24 Nov '19

24 Nov '19

Mark board_fit_config_name_match() as weak so a board can overwrite the empty function. Signed-off-by: Michael Walle <michael(a)walle.cc> --- arch/arm/cpu/armv8/fsl-layerscape/spl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/cpu/armv8/fsl-layerscape/spl.c b/arch/arm/cpu/armv8/fsl-layerscape/spl.c index 3f6a5f6a42..0195a2d96c 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/spl.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/spl.c @@ -128,7 +128,7 @@ int spl_start_uboot(void) } #endif /* CONFIG_SPL_OS_BOOT */ #ifdef CONFIG_SPL_LOAD_FIT -int board_fit_config_name_match(const char *name) +__weak int board_fit_config_name_match(const char *name) { /* Just empty function now - can't decide what to choose */ debug("%s: %s\n", __func__, name); -- 2.20.1

1 0

[U-Boot] Pull request: u-boot-rockchip-20191124
by Kever Yang 24 Nov '19

24 Nov '19

Hi Tom, Please pull the rockchip update: - Clean vid/pid in Kconfig and add fastboot for rk3399 - add 'u-boot, spl-fifo-mode' for mmc - Use FIT generator for rk3229 optee and rk3368 ATF - fan53555: add support for Silergy SYR82X and SYR83X Fix the u8 type comparision with '-1'. Travis: https://travis-ci.org/keveryang/u-boot/builds/616004990 Thanks, - Kever The following changes since commit d4a31e8ee5592072d8d5208b3e950cba2d89b6bd: Prepare v2020.01-rc3 (2019-11-18 21:31:49 -0500) are available in the Git repository at: https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip.git tags/u-boot-rockchip-20191124 for you to fetch changes up to 8019d32c4701b95410113541deb7f28d5c2b02a5: rockchip: px30: enable spl-fifo-mode for both emmc and sdmmc on evb (2019-11-23 23:41:44 +0800) ---------------------------------------------------------------- Heiko Stuebner (2): rockchip: dwmmc: add handling for u-boot, spl-fifo-mode rockchip: px30: enable spl-fifo-mode for both emmc and sdmmc on evb Jagan Teki (10): gadget: Select USB_GADGET_MANUFACTURER for rockchip gadget: Select USB_GADGET_VENDOR_NUM for rockchip gadget: rockchip: USB_GADGET_PRODUCT_NUM gadget: rockchip: Add rk3128 USB_GADGET_PRODUCT_NUM fastboot: rockchip: Select FASTBOOT_FLASH[_MMC_DEV] fastboot: rockchip: Fix rk3328 default mmc device usb: dwc3: Add phy interface for dwc3_uboot gadget: rockchip: Add rk3399 USB_GADGET_PRODUCT_NUM rockchip: Setup dwc3_device (for non-dm gadgets) rock960: Enable USB Gadget Kever Yang (3): rockchip: Convert to use FIT generator for optee rockchip: lion-rk3368: Migrate to use common FIT generator Kconfig: Enable building of u-boot.itb on Rockchip platform Vasily Khoruzhick (3): power: fan53555: add support for Silergy SYR82X and SYR83X rockchip: i2c: don't sent stop bit after each message power: fan53555: fix fan53555_regulator_set_value Kconfig | 2 +- arch/arm/dts/px30-evb-u-boot.dtsi | 7 +- arch/arm/mach-rockchip/board.c | 32 ++++++++- arch/arm/mach-rockchip/fit_spl_optee.its | 50 -------------- arch/arm/mach-rockchip/fit_spl_optee.sh | 78 ++++++++++++++++++++++ .../theobroma-systems/lion_rk3368/fit_spl_atf.its | 52 --------------- configs/elgin-rv1108_defconfig | 2 - configs/evb-rk3036_defconfig | 5 -- configs/evb-rk3128_defconfig | 2 - configs/evb-rk3229_defconfig | 7 +- configs/evb-rk3288_defconfig | 5 -- configs/evb-rk3328_defconfig | 5 -- configs/evb-rv1108_defconfig | 2 - configs/firefly-rk3288_defconfig | 5 -- configs/kylin-rk3036_defconfig | 5 -- configs/lion-rk3368_defconfig | 1 - configs/miqi-rk3288_defconfig | 5 -- configs/phycore-rk3288_defconfig | 5 -- configs/popmetal-rk3288_defconfig | 5 -- configs/rock2_defconfig | 2 - configs/rock64-rk3328_defconfig | 5 -- configs/rock960-rk3399_defconfig | 2 + configs/tinker-rk3288_defconfig | 5 -- configs/tinker-s-rk3288_defconfig | 5 -- configs/vyasa-rk3288_defconfig | 3 - drivers/fastboot/Kconfig | 3 +- drivers/i2c/rk_i2c.c | 5 +- drivers/mmc/rockchip_dw_mmc.c | 5 ++ drivers/power/pmic/fan53555.c | 7 +- drivers/power/regulator/fan53555.c | 47 +++++++++---- drivers/usb/dwc3/core.c | 27 ++++++++ drivers/usb/dwc3/core.h | 12 ++++ drivers/usb/gadget/Kconfig | 7 ++ include/dwc3-uboot.h | 2 + include/linux/usb/phy.h | 19 ++++++ include/power/fan53555.h | 14 ++++ 36 files changed, 247 insertions(+), 198 deletions(-) delete mode 100644 arch/arm/mach-rockchip/fit_spl_optee.its create mode 100755 arch/arm/mach-rockchip/fit_spl_optee.sh delete mode 100644 board/theobroma-systems/lion_rk3368/fit_spl_atf.its create mode 100644 include/linux/usb/phy.h create mode 100644 include/power/fan53555.h

2 1

[U-Boot] [PATCH v3] travis: rework NXP layerscape jobs
by Heiko Schocher 24 Nov '19

24 Nov '19

remove from NXP arm32 all layerscape boards and build them instead in already existing layerscape jobs (which now not only build aarch64 boards) Signed-off-by: Heiko Schocher <hs(a)denx.de> --- travis build: https://travis-ci.org/hsdenx/u-boot-test/builds/615388594 https://dev.azure.com/hs0298/hs/_build/results?buildId=5 Changes in v3: - add changes also to azure pipeline, as it makes sense here to keep azure configuration in sync with travis configuration Changes in v2: - collect in the layerscape jobs not only aarch64 based boards as Tom suggested. - change subject, old was "travis: split NXP ARM32 job" .azure-pipelines.yml | 26 +++++++++++++------------- .travis.yml | 28 ++++++++++++++-------------- 2 files changed, 27 insertions(+), 27 deletions(-) diff --git a/.azure-pipelines.yml b/.azure-pipelines.yml index 44a76ebb09..cad8eea87b 100644 --- a/.azure-pipelines.yml +++ b/.azure-pipelines.yml @@ -312,19 +312,19 @@ jobs: arm_bcm: BUILDMAN: "bcm -x mips" nxp_arm32: - BUILDMAN: "freescale -x powerpc,m68k,aarch64" - nxp_aarch64_ls101x: - BUILDMAN: "freescale&aarch64&ls101" - nxp_aarch64_ls102x: - BUILDMAN: "freescale&aarch64&ls102" - nxp_aarch64_ls104x: - BUILDMAN: "freescale&aarch64&ls104" - nxp_aarch64_ls108x: - BUILDMAN: "freescale&aarch64&ls108" - nxp_aarch64_ls20xx: - BUILDMAN: "freescale&aarch64&ls20" - nxp_aarch64_lx216x: - BUILDMAN: "freescale&aarch64&lx216" + BUILDMAN: "freescale -x powerpc,m68k,aarch64,ls101,ls102,ls104,ls108,ls20,lx216" + nxp_ls101x: + BUILDMAN: "freescale&ls101" + nxp_ls102x: + BUILDMAN: "freescale&ls102" + nxp_ls104x: + BUILDMAN: "freescale&ls104" + nxp_ls108x: + BUILDMAN: "freescale&ls108" + nxp_ls20xx: + BUILDMAN: "freescale&ls20" + nxp_lx216x: + BUILDMAN: "freescale&lx216" imx6: BUILDMAN: "mx6 -x boundary,engicam,freescale,technexion,toradex" imx: diff --git a/.travis.yml b/.travis.yml index d973aaa653..5da046ca7e 100644 --- a/.travis.yml +++ b/.travis.yml @@ -183,27 +183,27 @@ matrix: - name: "buildman ARM bcm" env: - BUILDMAN="bcm -x mips" - - name: "buildman NXP ARM32" + - name: "buildman NXP ARM32 (catch-all)" env: - - BUILDMAN="freescale -x powerpc,m68k,aarch64" - - name: "buildman NXP AArch64 LS101x" + - BUILDMAN="freescale -x powerpc,m68k,aarch64,ls101,ls102,ls104,ls108,ls20,lx216" + - name: "buildman NXP LS101x" env: - - BUILDMAN="freescale&aarch64&ls101" - - name: "buildman NXP AArch64 LS102x" + - BUILDMAN="freescale&ls101" + - name: "buildman NXP LS102x" env: - - BUILDMAN="freescale&aarch64&ls102" - - name: "buildman NXP AArch64 LS104x" + - BUILDMAN="freescale&ls102" + - name: "buildman NXP LS104x" env: - - BUILDMAN="freescale&aarch64&ls104" - - name: "buildman NXP AArch64 LS108x" + - BUILDMAN="freescale&ls104" + - name: "buildman NXP LS108x" env: - - BUILDMAN="freescale&aarch64&ls108" - - name: "buildman NXP AArch64 LS20xx" + - BUILDMAN="freescale&ls108" + - name: "buildman NXP LS20xx" env: - - BUILDMAN="freescale&aarch64&ls20" - - name: "buildman NXP AArch64 LX216x" + - BUILDMAN="freescale&ls20" + - name: "buildman NXP LX216x" env: - - BUILDMAN="freescale&aarch64&lx216" + - BUILDMAN="freescale&lx216" - name: "buildman i.MX6 tqc" env: - BUILDMAN="mx6&tqc" -- 2.21.0

2 1

[U-Boot] [PATCH v2] travis: move orangepi to vendor job
by Heiko Schocher 24 Nov '19

24 Nov '19

move orangepi builds into a new job, and exclude orangepi builds from sunxi and rockchip jobs. Signed-off-by: Heiko Schocher <hs(a)denx.de> --- travis build: https://travis-ci.org/hsdenx/u-boot-test/builds/614396275 Changes in v2: - collect orangepi builds in an separate job as boards as Tom suggested. - change subject, old was "travis: split 32bit sun8i job" .travis.yml | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/.travis.yml b/.travis.yml index d5f34f96cc..5da046ca7e 100644 --- a/.travis.yml +++ b/.travis.yml @@ -236,16 +236,16 @@ matrix: - BUILDMAN="sun7i" - name: "buildman 64bit sun8i" env: - - BUILDMAN="sun8i&aarch64" + - BUILDMAN="sun8i&aarch64 -x orangepi" - name: "buildman 32bit sun8i" env: - - BUILDMAN="sun8i&armv7" + - BUILDMAN="sun8i&armv7 -x orangepi" - name: "buildman sun9i" env: - BUILDMAN="sun9i" - name: "buildman sun50i" env: - - BUILDMAN="sun50i" + - BUILDMAN="sun50i -x orangepi" - name: "buildman catch-all ARM" env: - BUILDMAN="arm -x arm11,arm7,arm9,aarch64,at91,bcm,freescale,kirkwood,mvebu,siemens,tegra,uniphier,mx,samsung,sunxi,am33xx,omap,rockchip,toradex,socfpga,k2,k3,zynq" @@ -314,6 +314,9 @@ matrix: - name: "buildman omap" env: - BUILDMAN="omap" + - name: "buildman orangepi" + env: + - BUILDMAN="orangepi" - name: "buildman uniphier" env: - BUILDMAN="uniphier" @@ -322,7 +325,7 @@ matrix: - BUILDMAN="aarch64 -x bcm,k3,tegra,ls1,ls2,mvebu,uniphier,sunxi,samsung,rockchip,versal,zynq" - name: "buildman rockchip" env: - - BUILDMAN="rockchip" + - BUILDMAN="rockchip -x orangepi" - name: "buildman sh" env: - BUILDMAN="sh -x arm" -- 2.21.0

3 4

[U-Boot] [PATCH v2 1/3] tools: checkpatch: Restore 'debug' and 'printf' to logFunctions list
by James Byrne 24 Nov '19

24 Nov '19

The 'debug' and 'printf' functions were previously added to the list of logFunctions in commit 0cab42110dbf ("checkpatch.pl: Add 'debug' to the list of logFunctions") and commit 397bfd4642c1 ("checkpatch.pl: Add 'printf' to logFunctions") but these additions were lost when newer versions of checkpatch were pulled in from the upstream Linux kernel version. This restores them so that you don't end up in a situation where checkpatch will give a warning for "quoted string split across lines" which you cannot fix without getting a warning for "line over 80 characters" instead. Signed-off-by: James Byrne <james.byrne(a)origamienergy.com> --- Changes in v2: None scripts/checkpatch.pl | 2 ++ 1 file changed, 2 insertions(+) diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl index 6fcc66afb0..c2641bc995 100755 --- a/scripts/checkpatch.pl +++ b/scripts/checkpatch.pl @@ -464,6 +464,8 @@ our $logFunctions = qr{(?x: TP_printk| WARN(?:_RATELIMIT|_ONCE|)| panic| + debug| + printf| MODULE_[A-Z_]+| seq_vprintf|seq_printf|seq_puts )}; -- 2.24.0

2 1