January 2019 - U-Boot

[U-Boot] [PATCH] travis: Break up the NXP Layerscape jobs more
by Tom Rini 19 Jan '19

19 Jan '19

The single job for all Layerscape 10xx platforms is close to, and sometimes exceeds the time limit for a single job configuration. Break this down into jobs for LS101x, LS104x and LS108x instead. Signed-off-by: Tom Rini <trini(a)konsulko.com> --- .travis.yml | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/.travis.yml b/.travis.yml index fc4d5a1d5ccc..d1c283d1f801 100644 --- a/.travis.yml +++ b/.travis.yml @@ -170,9 +170,15 @@ matrix: - name: "buildman Freescale ARM32" env: - BUILDMAN="freescale -x powerpc,m68k,aarch64" - - name: "buildman Freescale AArch64 LS10xx" + - name: "buildman Freescale AArch64 LS101x" env: - - BUILDMAN="freescale&aarch64&&ls1" + - BUILDMAN="freescale&aarch64&ls10101" + - name: "buildman Freescale AArch64 LS104x" + env: + - BUILDMAN="freescale&aarch64&ls104" + - name: "buildman Freescale AArch64 LS108x" + env: + - BUILDMAN="freescale&aarch64&ls108" - name: "buildman Freescale AArch64 LS20xx" env: - BUILDMAN="freescale&aarch64&&ls2" -- 2.7.4

1 1

[U-Boot] [PATCH] configs: Remove am43xx_evm_ethboot_defconfig
by Vignesh R 19 Jan '19

19 Jan '19

am43xx_evm_ethboot_defconfig is not being actively used and has not been moved to DM or DT. Also, ethboot cannot be tested on AM43xx EVM as such due EVM limitations. Therefore delete it. Signed-off-by: Vignesh R <vigneshr(a)ti.com> --- board/ti/am43xx/MAINTAINERS | 1 - configs/am43xx_evm_ethboot_defconfig | 64 ---------------------------- 2 files changed, 65 deletions(-) delete mode 100644 configs/am43xx_evm_ethboot_defconfig diff --git a/board/ti/am43xx/MAINTAINERS b/board/ti/am43xx/MAINTAINERS index bf098064bdaf..ab9da22c6427 100644 --- a/board/ti/am43xx/MAINTAINERS +++ b/board/ti/am43xx/MAINTAINERS @@ -4,7 +4,6 @@ S: Maintained F: board/ti/am43xx/ F: include/configs/am43xx_evm.h F: configs/am43xx_evm_defconfig -F: configs/am43xx_evm_ethboot_defconfig F: configs/am43xx_evm_qspiboot_defconfig F: configs/am43xx_evm_usbhost_boot_defconfig F: configs/am43xx_evm_rtconly_defconfig diff --git a/configs/am43xx_evm_ethboot_defconfig b/configs/am43xx_evm_ethboot_defconfig deleted file mode 100644 index c1b32be1907c..000000000000 --- a/configs/am43xx_evm_ethboot_defconfig +++ /dev/null @@ -1,64 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_OMAP2PLUS=y -CONFIG_AM43XX=y -CONFIG_SPL=y -CONFIG_DISTRO_DEFAULTS=y -CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=1" -# CONFIG_USE_BOOTCOMMAND is not set -CONFIG_SYS_CONSOLE_INFO_QUIET=y -# CONFIG_MISC_INIT_R is not set -CONFIG_VERSION_VARIABLE=y -# CONFIG_SPL_SYS_MALLOC_SIMPLE is not set -CONFIG_SPL_ETH_SUPPORT=y -CONFIG_SPL_MTD_SUPPORT=y -CONFIG_SPL_NET_SUPPORT=y -CONFIG_SPL_NET_VCI_STRING="AM43xx U-Boot SPL" -CONFIG_SPL_OS_BOOT=y -CONFIG_CMD_SPL=y -CONFIG_CMD_SPL_NAND_OFS=0x00100000 -CONFIG_CMD_SPL_WRITE_SIZE=0x40000 -CONFIG_CMD_ASKENV=y -CONFIG_CMD_EEPROM=y -CONFIG_CMD_DFU=y -# CONFIG_CMD_FLASH is not set -CONFIG_CMD_GPIO=y -CONFIG_CMD_GPT=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_NAND=y -CONFIG_CMD_SF=y -CONFIG_CMD_SPI=y -CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_EXT4_WRITE=y -CONFIG_CMD_MTDPARTS=y -CONFIG_MTDIDS_DEFAULT="nand0=nand.0" -CONFIG_MTDPARTS_DEFAULT="mtdparts=nand.0:256k(NAND.SPL),256k(NAND.SPL.backup1),256k(NAND.SPL.backup2),256k(NAND.SPL.backup3),512k(NAND.u-boot-spl-os),1m(NAND.u-boot),256k(NAND.u-boot-env),256k(NAND.u-boot-env.backup1),7m(NAND.kernel),-(NAND.file-system)" -CONFIG_ENV_IS_IN_FAT=y -CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y -CONFIG_DFU_MMC=y -CONFIG_DFU_RAM=y -CONFIG_DFU_SF=y -CONFIG_MMC_OMAP_HS=y -CONFIG_NAND=y -CONFIG_SPI_FLASH=y -CONFIG_SPI_FLASH_MACRONIX=y -CONFIG_MII=y -CONFIG_DRIVER_TI_CPSW=y -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_TI_QSPI=y -CONFIG_USB=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_DWC3=y -CONFIG_USB_DWC3=y -CONFIG_USB_DWC3_GADGET=y -CONFIG_USB_DWC3_OMAP=y -CONFIG_USB_DWC3_PHY_OMAP=y -CONFIG_OMAP_USB_PHY=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments" -CONFIG_USB_GADGET_VENDOR_NUM=0x0403 -CONFIG_USB_GADGET_PRODUCT_NUM=0xbd00 -CONFIG_USB_GADGET_DOWNLOAD=y -CONFIG_OF_LIBFDT=y -- 2.20.1

2 2

[U-Boot] [PATCH] configs: Remove unused am335x_evm defconfigs
by Vignesh R 19 Jan '19

19 Jan '19

These defconfigs don't seem be actively used any more, and have not been moved to adapt DM or DT. Therefore delete them. Signed-off-by: Vignesh R <vigneshr(a)ti.com> --- board/ti/am335x/MAINTAINERS | 3 -- configs/am335x_evm_nor_defconfig | 52 ---------------------------- configs/am335x_evm_norboot_defconfig | 49 -------------------------- configs/am335x_evm_spiboot_defconfig | 47 ------------------------- 4 files changed, 151 deletions(-) delete mode 100644 configs/am335x_evm_nor_defconfig delete mode 100644 configs/am335x_evm_norboot_defconfig delete mode 100644 configs/am335x_evm_spiboot_defconfig diff --git a/board/ti/am335x/MAINTAINERS b/board/ti/am335x/MAINTAINERS index c99e06dc10bc..565f7055cdd3 100644 --- a/board/ti/am335x/MAINTAINERS +++ b/board/ti/am335x/MAINTAINERS @@ -6,7 +6,4 @@ F: include/configs/am335x_evm.h F: configs/am335x_boneblack_defconfig F: configs/am335x_boneblack_vboot_defconfig F: configs/am335x_evm_defconfig -F: configs/am335x_evm_nor_defconfig -F: configs/am335x_evm_norboot_defconfig -F: configs/am335x_evm_spiboot_defconfig F: configs/am335x_evm_usbspl_defconfig diff --git a/configs/am335x_evm_nor_defconfig b/configs/am335x_evm_nor_defconfig deleted file mode 100644 index e08234e9f8f0..000000000000 --- a/configs/am335x_evm_nor_defconfig +++ /dev/null @@ -1,52 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_OMAP2PLUS=y -CONFIG_TI_COMMON_CMD_OPTIONS=y -CONFIG_AM33XX=y -CONFIG_NOR=y -CONFIG_SPL=y -CONFIG_DISTRO_DEFAULTS=y -CONFIG_BOOTCOMMAND="if test ${boot_fit} -eq 1; then run update_to_fit; fi; run findfdt; run init_console; run envboot; run distro_bootcmd" -CONFIG_SYS_CONSOLE_INFO_QUIET=y -CONFIG_VERSION_VARIABLE=y -CONFIG_ARCH_MISC_INIT=y -CONFIG_SPL_MTD_SUPPORT=y -CONFIG_SPL_MUSB_NEW_SUPPORT=y -CONFIG_SPL_OS_BOOT=y -CONFIG_CMD_SPL=y -CONFIG_CMD_SPL_NAND_OFS=0x00080000 -CONFIG_CMD_NAND=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_MTDPARTS=y -CONFIG_MTDIDS_DEFAULT="nand0=nand.0" -CONFIG_MTDPARTS_DEFAULT="mtdparts=nand.0:128k(NAND.SPL),128k(NAND.SPL.backup1),128k(NAND.SPL.backup2),128k(NAND.SPL.backup3),256k(NAND.u-boot-spl-os),1m(NAND.u-boot),128k(NAND.u-boot-env),128k(NAND.u-boot-env.backup1),8m(NAND.kernel),-(NAND.file-system)" -CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y -CONFIG_BOOTCOUNT_LIMIT=y -CONFIG_DFU_MMC=y -CONFIG_DFU_NAND=y -CONFIG_DFU_RAM=y -CONFIG_USB_FUNCTION_FASTBOOT=y -CONFIG_MMC_OMAP_HS=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y -CONFIG_FLASH_CFI_MTD=y -CONFIG_SYS_FLASH_PROTECTION=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_NAND=y -CONFIG_SPI_FLASH=y -CONFIG_SPI_FLASH_WINBOND=y -CONFIG_MII=y -CONFIG_DRIVER_TI_CPSW=y -CONFIG_SPI=y -CONFIG_OMAP3_SPI=y -CONFIG_USB=y -CONFIG_USB_MUSB_HOST=y -CONFIG_USB_MUSB_GADGET=y -CONFIG_USB_MUSB_DSPS=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments" -CONFIG_USB_GADGET_VENDOR_NUM=0x0451 -CONFIG_USB_GADGET_PRODUCT_NUM=0xd022 -CONFIG_USB_ETHER=y -CONFIG_LZO=y -CONFIG_OF_LIBFDT=y diff --git a/configs/am335x_evm_norboot_defconfig b/configs/am335x_evm_norboot_defconfig deleted file mode 100644 index 040384f3c7a0..000000000000 --- a/configs/am335x_evm_norboot_defconfig +++ /dev/null @@ -1,49 +0,0 @@ -CONFIG_ARM=y -# CONFIG_SYS_THUMB_BUILD is not set -CONFIG_ARCH_OMAP2PLUS=y -CONFIG_SYS_TEXT_BASE=0x08000000 -CONFIG_TI_COMMON_CMD_OPTIONS=y -CONFIG_AM33XX=y -CONFIG_NOR=y -CONFIG_DISTRO_DEFAULTS=y -CONFIG_NOR_BOOT=y -CONFIG_BOOTCOMMAND="if test ${boot_fit} -eq 1; then run update_to_fit; fi; run findfdt; run init_console; run envboot; run distro_bootcmd" -CONFIG_SYS_CONSOLE_INFO_QUIET=y -CONFIG_VERSION_VARIABLE=y -CONFIG_ARCH_MISC_INIT=y -CONFIG_BOARD_EARLY_INIT_F=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_MTDPARTS=y -CONFIG_MTDIDS_DEFAULT="nor0=physmap-flash.0" -CONFIG_MTDPARTS_DEFAULT="mtdparts=physmap-flash.0:512k(u-boot),128k(u-boot-env1),128k(u-boot-env2),4m(kernel),-(rootfs)" -CONFIG_ENV_IS_IN_FLASH=y -CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y -CONFIG_DFU_MMC=y -CONFIG_DFU_RAM=y -CONFIG_USB_FUNCTION_FASTBOOT=y -CONFIG_MMC_OMAP_HS=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_MTD_DEVICE=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y -CONFIG_FLASH_CFI_MTD=y -CONFIG_SYS_FLASH_PROTECTION=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_SPI_FLASH=y -CONFIG_SPI_FLASH_WINBOND=y -CONFIG_MII=y -CONFIG_DRIVER_TI_CPSW=y -CONFIG_SPI=y -CONFIG_OMAP3_SPI=y -CONFIG_USB=y -CONFIG_USB_MUSB_HOST=y -CONFIG_USB_MUSB_GADGET=y -CONFIG_USB_MUSB_DSPS=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments" -CONFIG_USB_GADGET_VENDOR_NUM=0x0451 -CONFIG_USB_GADGET_PRODUCT_NUM=0xd022 -CONFIG_USB_ETHER=y -CONFIG_USBNET_HOST_ADDR="de:ad:be:af:00:00" -CONFIG_LZO=y -CONFIG_OF_LIBFDT=y diff --git a/configs/am335x_evm_spiboot_defconfig b/configs/am335x_evm_spiboot_defconfig deleted file mode 100644 index 1f430ad416a5..000000000000 --- a/configs/am335x_evm_spiboot_defconfig +++ /dev/null @@ -1,47 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_OMAP2PLUS=y -CONFIG_TI_COMMON_CMD_OPTIONS=y -CONFIG_AM33XX=y -CONFIG_SPL=y -CONFIG_SPL_SPI_FLASH_SUPPORT=y -CONFIG_SPL_SPI_SUPPORT=y -CONFIG_DISTRO_DEFAULTS=y -CONFIG_SYS_EXTRA_OPTIONS="SPI_BOOT" -CONFIG_SPI_BOOT=y -CONFIG_BOOTCOMMAND="if test ${boot_fit} -eq 1; then run update_to_fit; fi; run findfdt; run init_console; run envboot; run distro_bootcmd" -CONFIG_SYS_CONSOLE_INFO_QUIET=y -CONFIG_VERSION_VARIABLE=y -CONFIG_ARCH_MISC_INIT=y -CONFIG_SPL_MUSB_NEW_SUPPORT=y -# CONFIG_SPL_NAND_SUPPORT is not set -CONFIG_SPL_SPI_LOAD=y -# CONFIG_CMD_FLASH is not set -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_MTDPARTS=y -CONFIG_MTDIDS_DEFAULT="nor0=m25p80-flash.0" -CONFIG_MTDPARTS_DEFAULT="mtdparts=m25p80-flash.0:128k(SPL),512k(u-boot),128k(u-boot-env1),128k(u-boot-env2),3464k(kernel),-(rootfs)" -CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y -CONFIG_BOOTCOUNT_LIMIT=y -CONFIG_DFU_MMC=y -CONFIG_DFU_RAM=y -CONFIG_USB_FUNCTION_FASTBOOT=y -CONFIG_MMC_OMAP_HS=y -CONFIG_MTD_DEVICE=y -CONFIG_SPI_FLASH=y -CONFIG_SPI_FLASH_WINBOND=y -CONFIG_MII=y -CONFIG_DRIVER_TI_CPSW=y -CONFIG_SPI=y -CONFIG_OMAP3_SPI=y -CONFIG_USB=y -CONFIG_USB_MUSB_HOST=y -CONFIG_USB_MUSB_GADGET=y -CONFIG_USB_MUSB_DSPS=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments" -CONFIG_USB_GADGET_VENDOR_NUM=0x0451 -CONFIG_USB_GADGET_PRODUCT_NUM=0xd022 -CONFIG_USB_ETHER=y -CONFIG_LZO=y -CONFIG_OF_LIBFDT=y -- 2.20.1

2 2

[U-Boot] [PATCH] configs: am335x_evm: Enable DM_SPI and DM_SPI_FLASH
by Vignesh R 19 Jan '19

19 Jan '19

Enable DM_SPI and DM_SPI_FLASH for actively used defconfigs for am335x_evm. Signed-off-by: Vignesh R <vigneshr(a)ti.com> --- configs/am335x_evm_defconfig | 2 ++ configs/am335x_hs_evm_defconfig | 2 ++ configs/am335x_hs_evm_uart_defconfig | 2 ++ 3 files changed, 6 insertions(+) diff --git a/configs/am335x_evm_defconfig b/configs/am335x_evm_defconfig index 0931c1e97f2f..21c5bdb83e9f 100644 --- a/configs/am335x_evm_defconfig +++ b/configs/am335x_evm_defconfig @@ -37,6 +37,7 @@ CONFIG_MISC=y CONFIG_DM_MMC=y CONFIG_MMC_OMAP_HS=y CONFIG_NAND=y +CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_WINBOND=y CONFIG_DM_ETH=y @@ -44,6 +45,7 @@ CONFIG_PHY_GIGE=y CONFIG_MII=y CONFIG_DRIVER_TI_CPSW=y CONFIG_SPI=y +CONFIG_DM_SPI=y CONFIG_OMAP3_SPI=y CONFIG_TIMER=y CONFIG_OMAP_TIMER=y diff --git a/configs/am335x_hs_evm_defconfig b/configs/am335x_hs_evm_defconfig index 1a7c5cfb1728..b158fd1a277d 100644 --- a/configs/am335x_hs_evm_defconfig +++ b/configs/am335x_hs_evm_defconfig @@ -43,6 +43,7 @@ CONFIG_DM_MMC=y # CONFIG_MMC_HW_PARTITIONING is not set CONFIG_MMC_OMAP_HS=y CONFIG_NAND=y +CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_WINBOND=y CONFIG_DM_ETH=y @@ -50,6 +51,7 @@ CONFIG_PHY_GIGE=y CONFIG_MII=y CONFIG_DRIVER_TI_CPSW=y CONFIG_SPI=y +CONFIG_DM_SPI=y CONFIG_OMAP3_SPI=y CONFIG_TIMER=y CONFIG_OMAP_TIMER=y diff --git a/configs/am335x_hs_evm_uart_defconfig b/configs/am335x_hs_evm_uart_defconfig index 147da80f0dcf..e5f54a0e2bc2 100644 --- a/configs/am335x_hs_evm_uart_defconfig +++ b/configs/am335x_hs_evm_uart_defconfig @@ -45,6 +45,7 @@ CONFIG_DM_MMC=y # CONFIG_MMC_HW_PARTITIONING is not set CONFIG_MMC_OMAP_HS=y CONFIG_NAND=y +CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_WINBOND=y CONFIG_DM_ETH=y @@ -52,6 +53,7 @@ CONFIG_PHY_GIGE=y CONFIG_MII=y CONFIG_DRIVER_TI_CPSW=y CONFIG_SPI=y +CONFIG_DM_SPI=y CONFIG_OMAP3_SPI=y CONFIG_TIMER=y CONFIG_OMAP_TIMER=y -- 2.20.1

2 1

[U-Boot] [PATCH v3] adding saveenv-command for bananapi r2
by Frank Wunderlich 19 Jan '19

19 Jan '19

bananapi r2 can be booted from sd-card and emmc saving the environment have to choose the storage from which the device has booted also the offset is set to 1MB to make sure env is written to block "user data area" between uboot and first partition https://www.fw-web.de/dokuwiki/lib/exe/fetch.php?cache=&media=bpi-r2:boot-s… v3: using generated defconfig v2: fixed bracket-style in if-else statement Signed-off-by: Frank Wunderlich <frank-w(a)public-files.de> --- board/mediatek/mt7623/mt7623_rfb.c | 19 +++++++++++++++++++ configs/mt7623n_bpir2_defconfig | 1 + include/configs/mt7623.h | 3 +++ 3 files changed, 23 insertions(+) diff --git a/board/mediatek/mt7623/mt7623_rfb.c b/board/mediatek/mt7623/mt7623_rfb.c index 08468b50ea..4ec2764976 100644 --- a/board/mediatek/mt7623/mt7623_rfb.c +++ b/board/mediatek/mt7623/mt7623_rfb.c @@ -14,3 +14,22 @@ int board_init(void) return 0; } + +int mmc_get_boot_dev(void) +{ + int g_mmc_devid = -1; + char *uflag = (char *)0x81DFFFF0; + if (strncmp(uflag,"eMMC",4)==0) { + g_mmc_devid = 0; + printf("Boot From Emmc(id:%d)\n\n", g_mmc_devid); + } else { + g_mmc_devid = 1; + printf("Boot From SD(id:%d)\n\n", g_mmc_devid); + } + return g_mmc_devid; +} + +int mmc_get_env_dev(void) +{ + return mmc_get_boot_dev(); +} diff --git a/configs/mt7623n_bpir2_defconfig b/configs/mt7623n_bpir2_defconfig index ae4fb280dc..fcb02f5a7b 100644 --- a/configs/mt7623n_bpir2_defconfig +++ b/configs/mt7623n_bpir2_defconfig @@ -28,6 +28,7 @@ CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y CONFIG_OF_EMBED=y CONFIG_DEFAULT_DEVICE_TREE="mt7623n-bananapi-bpi-r2" +CONFIG_ENV_IS_IN_MMC=y CONFIG_REGMAP=y CONFIG_SYSCON=y # CONFIG_BLOCK_CACHE is not set diff --git a/include/configs/mt7623.h b/include/configs/mt7623.h index ba763501cf..fb6ac073f3 100644 --- a/include/configs/mt7623.h +++ b/include/configs/mt7623.h @@ -53,4 +53,7 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ FDT_HIGH +#define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_ENV_OFFSET 0x100000 + #endif -- 2.17.1

2 1

[U-Boot] [PATCH] mkimage: fixup CONFIG_FIT_EXTERNAL_OFFSET
by Patrick Wildt 19 Jan '19

19 Jan '19

The last parameter is expected to be the imagefile. Since -E is a flag having the output name before -p will make mkimage ignore the external offset option. Signed-off-by: Patrick Wildt <patrick(a)blueri.se> --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 6aa08964ff..8efe51fb89 100644 --- a/Makefile +++ b/Makefile @@ -893,7 +893,7 @@ cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \ >$(MKIMAGEOUTPUT) $(if $(KBUILD_VERBOSE:0=), && cat $(MKIMAGEOUTPUT)) quiet_cmd_mkfitimage = MKIMAGE $@ -cmd_mkfitimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -f $(U_BOOT_ITS) -E $@ -p $(CONFIG_FIT_EXTERNAL_OFFSET)\ +cmd_mkfitimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -f $(U_BOOT_ITS) -E -p $(CONFIG_FIT_EXTERNAL_OFFSET) $@\ >$(MKIMAGEOUTPUT) $(if $(KBUILD_VERBOSE:0=), && cat $(MKIMAGEOUTPUT)) quiet_cmd_cat = CAT $@ -- 2.17.2 (Apple Git-113)

2 1

[U-Boot] [PATCH 00/10] Kconfig: spelling fixes
by Chris Packham 19 Jan '19

19 Jan '19

These were found automatically with codespell. Codespell is fairly conservative about false positives so there are likely more errors but these are the low hanging fruit. These patches should all be self-contained so subsystem/board maintainers can pick them up at will. Chris Packham (10): Kconfig: fix spelling common: spl: Kconfig: spelling fixes arm: Kconfig: spelling fixes x86: Kconfig: spelling fixes work_92105: Kconfig: spelling fixes drivers: Kconfig: spelling fixes i2c: Kconfig: spelling fixes pinctrl: Kconfig: spelling fixes video: Kconfig: spelling fixes lib: Kconfig: spelling fixes Kconfig | 2 +- arch/arm/mach-bcm283x/Kconfig | 10 +++++----- arch/x86/cpu/qemu/Kconfig | 2 +- arch/x86/cpu/quark/Kconfig | 2 +- board/work-microwave/work_92105/Kconfig | 2 +- common/spl/Kconfig | 2 +- drivers/core/Kconfig | 2 +- drivers/i2c/Kconfig | 8 ++++---- drivers/pinctrl/Kconfig | 2 +- drivers/video/rockchip/Kconfig | 2 +- lib/Kconfig | 4 ++-- 11 files changed, 19 insertions(+), 19 deletions(-) -- 2.20.1

5 29

[U-Boot] [PATCH 1/1] disk: efi: GUIDs should be const
by Heinrich Schuchardt 19 Jan '19

19 Jan '19

Make system_guid const. Signed-off-by: Heinrich Schuchardt <xypron.glpk(a)gmx.de> --- disk/part_efi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/disk/part_efi.c b/disk/part_efi.c index d6bb53e6b5..239455b816 100644 --- a/disk/part_efi.c +++ b/disk/part_efi.c @@ -66,7 +66,7 @@ static char *print_efiname(gpt_entry *pte) return name; } -static efi_guid_t system_guid = PARTITION_SYSTEM_GUID; +static const efi_guid_t system_guid = PARTITION_SYSTEM_GUID; static inline int is_bootable(gpt_entry *p) { -- 2.20.1

3 2

[U-Boot] [PATCH 1/2] dts: db410: fix indentation
by Ramon Fried 19 Jan '19

19 Jan '19

Signed-off-by: Ramon Fried <ramon.fried(a)gmail.com> --- arch/arm/dts/dragonboard410c-uboot.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/dts/dragonboard410c-uboot.dtsi b/arch/arm/dts/dragonboard410c-uboot.dtsi index a07c97e811..9c1be2566f 100644 --- a/arch/arm/dts/dragonboard410c-uboot.dtsi +++ b/arch/arm/dts/dragonboard410c-uboot.dtsi @@ -28,8 +28,8 @@ serial@78b0000 { u-boot,dm-pre-reloc; - }; }; + }; }; -- 2.20.1

2 3

[U-Boot] [RFC 00/17] mx6sabre: Add DM and SPL FIT support
by Abel Vesa 19 Jan '19

19 Jan '19

This comes as an answer to the following: https://lists.denx.de/pipermail/u-boot/2018-November/348078.html https://lists.denx.de/pipermail/u-boot/2018-November/348062.html Abel Vesa (17): common: Break USB_STORAGE dependency between SPL and u-boot proper usb: ehci-mx6: Make regulator DM_REGULATOR dependent configs: imx6sabreauto: Add DM_MMC support configs: imx6sabreauto: Add DM_USB support mmc: fsl_esdhc: Fix DM_REGULATOR ifdefs for SPL builds arm: imx: Add board_fit_config_name_match to support FIT in SPL dts: imx: Add imx6q-sabreauto dts and imx6qdl-sabreauto dtsi files dts: imx: Add imx6q-sabresd dts and imx6qdl-sabresd dtsi files arm: imx: Add FIT SPL its configs: mx6sabreauto: Add SPL FIT and DM support configs: mx6sabresd: Add SPL FIT and DM support mx6sabreauto: Add DM_GPIO support mx6sabresd: Add DM_GPIO support configs: mx6sabreauto: Add DM_SPI_FLASH necessary configs configs: mx6sabresd: Add DM_SPI_FLASH necessary configs board: mx6sabreauto: Remove the non-DM code board: mx6sabresd: Remove non-DM code arch/arm/dts/Makefile | 4 +- arch/arm/dts/imx6q-sabreauto.dts | 78 ++ arch/arm/dts/imx6q-sabresd.dts | 92 +++ arch/arm/dts/imx6qdl-sabreauto.dtsi | 1118 +++++++++++++++++++++++++++ arch/arm/dts/imx6qdl-sabresd.dtsi | 1065 +++++++++++++++++++++++++ arch/arm/mach-imx/mx6/fit_spl.its | 41 + arch/arm/mach-imx/spl.c | 10 + arch/x86/cpu/coreboot/Kconfig | 1 + board/efi/efi-x86_payload/Kconfig | 1 + board/freescale/mx6sabreauto/mx6sabreauto.c | 73 +- board/freescale/mx6sabresd/mx6sabresd.c | 55 +- common/Makefile | 2 +- configs/apalis_imx6_defconfig | 1 + configs/colibri_imx6_defconfig | 1 + configs/mx6sabreauto_defconfig | 20 +- configs/mx6sabresd_defconfig | 22 +- drivers/mmc/fsl_esdhc.c | 8 +- drivers/usb/Kconfig | 9 + drivers/usb/host/ehci-mx6.c | 7 +- 19 files changed, 2478 insertions(+), 130 deletions(-) create mode 100644 arch/arm/dts/imx6q-sabreauto.dts create mode 100644 arch/arm/dts/imx6q-sabresd.dts create mode 100644 arch/arm/dts/imx6qdl-sabreauto.dtsi create mode 100644 arch/arm/dts/imx6qdl-sabresd.dtsi create mode 100644 arch/arm/mach-imx/mx6/fit_spl.its -- 2.7.4

4 25