January 2019 - U-Boot

[U-Boot] [BUG ] efiloader: incorrect creation of *.efi file
by Heinrich Schuchardt 21 Jan '19

21 Jan '19

Hello Alex, bootefi hello fails since 5be444d14b380b210b246aa73dd5a111e4b1f80d efi_loader: consistent build flags for EFI applications The problem is caused by incorrect entry point information in the EFI binary: Actual positions in EFI file: 0x178 hw_memcmp.constprop.0 0x1a8 efi_main Header information in EFI file (using https://github.com/xypron/efi_analyzer): BaseOfCode=0x148 AddressOfEntryPoint=0x148 So AddressOfEntryPoint is not pointing to efi_main(). Best regards Heinrich helloworld.efi: 00000140 00 00 00 00 20 00 50 E0 FD 7B BE A9 FD 03 00 91 00000150 E0 07 01 A9 60 F5 FF 10 01 00 00 90 21 C0 19 91 00000160 A7 00 00 94 60 00 00 B5 E0 07 41 A9 0F 00 00 94 00000170 FD 7B C2 A8 C0 03 5F D6 >03 00 80 D2< 02 68 63 38 00000180 24 68 63 38 5F 00 04 6B 60 00 00 54 40 00 04 4B 00000190 C0 03 5F D6 63 04 00 91 7F 40 00 F1 01 FF FF 54 000001A0 00 00 80 52 FB FF FF 17 >FD 7B B7 A9< 82 01 80 D2 000001B0 FD 03 00 91 F3 53 01 A9 F3 03 02 91 F4 03 01 AA 000001C0 F5 5B 02 A9 F7 63 03 A9 F9 6B 04 A9 FB 73 05 A9 lib/efi_loader/helloworld.o: file format elf64-littleaarch64 Disassembly of section .text: 0000000000000000 <hw_memcmp.constprop.0>: 0: d2800003 mov x3, #0x0 // #0 4: 38636802 ldrb w2, [x0, x3] 8: 38636824 ldrb w4, [x1, x3] c: 6b04005f cmp w2, w4 10: 54000060 b.eq 1c <hw_memcmp.constprop.0+0x1c> // b.none 14: 4b040040 sub w0, w2, w4 18: d65f03c0 ret 1c: 91000463 add x3, x3, #0x1 20: f100407f cmp x3, #0x10 24: 54ffff01 b.ne 4 <hw_memcmp.constprop.0+0x4> // b.any 28: 52800000 mov w0, #0x0 // #0 2c: 17fffffb b 18 <hw_memcmp.constprop.0+0x18> 0000000000000030 <efi_main>: 30: a9b77bfd stp x29, x30, [sp, #-144]! 34: d2800182 mov x2, #0xc // #12 38: 910003fd mov x29, sp 3c: a90153f3 stp x19, x20, [sp, #16] 40: 910203f3 add x19, sp, #0x80 44: aa0103f4 mov x20, x1 48: a9025bf5 stp x21, x22, [sp, #32] 4c: a90363f7 stp x23, x24, [sp, #48] 50: a9046bf9 stp x25, x26, [sp, #64] 54: a90573fb stp x27, x28, [sp, #80] 58: fd0033e8 str d8, [sp, #96] 5c: 9e670008 fmov d8, x0 60: f940203b ldr x27, [x1, #64] 64: aa1303e0 mov x0, x19 68: f940303a ldr x26, [x1, #96] 6c: 90000001 adrp x1, 0 <hw_memcmp.constprop.0> 70: 91000021 add x1, x1, #0x0 74: 94000000 bl 0 <memcpy> 78: f9400762 ldr x2, [x27, #8] 7c: 90000001 adrp x1, 0 <hw_memcmp.constprop.0> 80: aa1b03e0 mov x0, x27 84: 91000021 add x1, x1, #0x0 88: d63f0040 blr x2 8c: b9400a80 ldr w0, [x20, #8] 90: 52800004 mov w4, #0x0 // #0

2 5

[U-Boot] [PATCH 0/3] efi_loader: provide library for freestanding binaries
by Heinrich Schuchardt 21 Jan '19

21 Jan '19

GCC requires that freestanding programs provide memcpy(), memmove(), memset(), and memcmp(), cf. https://gcc.gnu.org/onlinedocs/gcc/Standards.html Provide the required library functions. Link them in all *.efi binaries. Fixes: 5be444d14b38 ("efi_loader: consistent build flags for EFI applications") Reverting said commit would not satisfy the general requirement of the GCC compiler for freestanding programs. Tested successfully, cf. https://travis-ci.org/xypron2/u-boot/builds/481823209 Heinrich Schuchardt (3): efi_loader: provide freestanding library efi_loader: use freestanding library for efi apps efi_loader: use library memcpy() in helloworld.efi lib/efi_loader/efi_freestanding.c | 90 +++++++++++++++++++++++++++++ lib/efi_loader/helloworld.c | 36 ++---------- lib/efi_selftest/efi_freestanding.c | 1 + scripts/Makefile.lib | 2 +- 4 files changed, 98 insertions(+), 31 deletions(-) create mode 100644 lib/efi_loader/efi_freestanding.c create mode 120000 lib/efi_selftest/efi_freestanding.c -- 2.20.1

2 4

[U-Boot] [PATCH v2] ARM: mvebu: add support for Allied Telesis x530
by Chris Packham 21 Jan '19

21 Jan '19

From: Chris Packham <chris.packham(a)alliedtelesis.co.nz> This is a range of stackable network switches. The SoC is Armada-385 and there are a number of variants with differing network port configurations. The DP variants are intended for a harsher operating environment so they use a different i2c mux and fit industrial-temp parts. Signed-off-by: Chris Packham <judge.packham(a)gmail.com> --- This needs http://patchwork.ozlabs.org/patch/1010285/ Changes in v2: - drop RFC, use armada-385-atl to prefix dts file names arch/arm/dts/Makefile | 4 +- arch/arm/dts/armada-385-atl-x530-u-boot.dtsi | 13 + arch/arm/dts/armada-385-atl-x530.dts | 50 ++++ arch/arm/dts/armada-385-atl-x530.dtsi | 266 +++++++++++++++++++ arch/arm/dts/armada-385-atl-x530DP.dts | 51 ++++ arch/arm/dts/armada-385-atl-x530DP.dtsi | 149 +++++++++++ arch/arm/mach-mvebu/Kconfig | 7 + board/alliedtelesis/common/gpio_hog.c | 36 +++ board/alliedtelesis/common/gpio_hog.h | 13 + board/alliedtelesis/x530/MAINTAINERS | 12 + board/alliedtelesis/x530/Makefile | 9 + board/alliedtelesis/x530/kwbimage.cfg | 12 + board/alliedtelesis/x530/x530.c | 161 +++++++++++ configs/x530_defconfig | 71 +++++ include/configs/x530.h | 134 ++++++++++ 15 files changed, 987 insertions(+), 1 deletion(-) create mode 100644 arch/arm/dts/armada-385-atl-x530-u-boot.dtsi create mode 100644 arch/arm/dts/armada-385-atl-x530.dts create mode 100644 arch/arm/dts/armada-385-atl-x530.dtsi create mode 100644 arch/arm/dts/armada-385-atl-x530DP.dts create mode 100644 arch/arm/dts/armada-385-atl-x530DP.dtsi create mode 100644 board/alliedtelesis/common/gpio_hog.c create mode 100644 board/alliedtelesis/common/gpio_hog.h create mode 100644 board/alliedtelesis/x530/MAINTAINERS create mode 100644 board/alliedtelesis/x530/Makefile create mode 100644 board/alliedtelesis/x530/kwbimage.cfg create mode 100644 board/alliedtelesis/x530/x530.c create mode 100644 configs/x530_defconfig create mode 100644 include/configs/x530.h diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index dda4e594914b..9b9a35b44a75 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -109,7 +109,9 @@ dtb-$(CONFIG_ARCH_MVEBU) += \ armada-xp-maxbcm.dtb \ armada-xp-synology-ds414.dtb \ armada-xp-theadorable.dtb \ - armada-38x-controlcenterdc.dtb + armada-38x-controlcenterdc.dtb \ + armada-385-atl-x530.dtb \ + armada-385-atl-x530DP.dtb dtb-$(CONFIG_ARCH_UNIPHIER_LD11) += \ uniphier-ld11-global.dtb \ diff --git a/arch/arm/dts/armada-385-atl-x530-u-boot.dtsi b/arch/arm/dts/armada-385-atl-x530-u-boot.dtsi new file mode 100644 index 000000000000..7074a73537fa --- /dev/null +++ b/arch/arm/dts/armada-385-atl-x530-u-boot.dtsi @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: GPL-2.0 + +&spi1 { + u-boot,dm-pre-reloc; + + spi-flash@0 { + u-boot,dm-pre-reloc; + }; +}; + +&uart0 { + u-boot,dm-pre-reloc; +}; diff --git a/arch/arm/dts/armada-385-atl-x530.dts b/arch/arm/dts/armada-385-atl-x530.dts new file mode 100644 index 000000000000..0ebaa8bb344c --- /dev/null +++ b/arch/arm/dts/armada-385-atl-x530.dts @@ -0,0 +1,50 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include "armada-385-atl-x530.dtsi" +#include "armada-385-atl-x530-u-boot.dtsi" + +/ { + model = "Allied Telesis x530"; + compatible = "alliedtelesis,x530", "marvell,armada385", "marvell,armada380"; + + nand-protect { + compatible = "atl,nand-protect"; + protect-gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>; + }; + + usb-enable { + compatible = "atl,usb-enable"; + enable-gpio = <&gpio0 19 GPIO_ACTIVE_HIGH>; + }; + + boot-board { + compatible = "atl,boot-board"; + present-gpio = <&gpio0 24 GPIO_ACTIVE_HIGH>; + override-gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>; + }; + + phy-reset { + compatible = "atl,phy-reset"; + reset-gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>, + <&gpio1 21 GPIO_ACTIVE_HIGH>; + }; + + led-enable { + compatible = "atl,led-enable"; + enable-gpio = <&gpio1 17 GPIO_ACTIVE_HIGH>; + }; + + led_7seg { + compatible = "atl,of-led-7seg"; + segment-gpios = < + &led_7seg_gpio 0 0 + &led_7seg_gpio 1 0 + &led_7seg_gpio 2 0 + &led_7seg_gpio 3 0 + &led_7seg_gpio 4 0 + &led_7seg_gpio 5 0 + &led_7seg_gpio 6 0 + &led_7seg_gpio 7 0>; + }; +}; diff --git a/arch/arm/dts/armada-385-atl-x530.dtsi b/arch/arm/dts/armada-385-atl-x530.dtsi new file mode 100644 index 000000000000..09a04bdcca13 --- /dev/null +++ b/arch/arm/dts/armada-385-atl-x530.dtsi @@ -0,0 +1,266 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <dt-bindings/gpio/gpio.h> +#include "armada-385.dtsi" + +/ { + model = "Allied Telesis x530"; + compatible = "alliedtelesis,x530", "marvell,armada385", "marvell,armada380"; + + chosen { + stdout-path = "serial0:115200n8"; + bootargs = "console=ttyS0,115200 earlyprintk"; + }; + + aliases { + spi1 = &spi1; + i2c0 = &i2c0; + }; + + memory { + device_type = "memory"; + reg = <0 0x00000000 0 0x40000000>; /* 1 GB */ + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 + MBUS_ID(0x01, 0x3d) 0 0xf4800000 0x80000 + MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>; + + pcie-mem-aperture = <0xa0000000 0x40000000>; + }; + + eco-button-interrupt { + compatible = "atl,eco-button-interrupt"; + eco-button-gpio = <&gpio0 14 GPIO_ACTIVE_LOW>; + }; + + board-reset { + compatible = "atl,phy_reset"; + /* Physical board layout of reset pin is active-low but for the + * current driver we have to set it to active-high here. + */ + phy-reset-gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>, + <&gpio1 21 GPIO_ACTIVE_HIGH>; + }; + + phy-int { + compatible = "linux,uio-pdrv-genirq"; + interrupt-parent = <&gpio0>; + interrupts = <6 IRQ_TYPE_EDGE_BOTH>; + }; + + led-enable { + compatible = "atl,led-enable"; + led-enable-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; + }; + + led_7seg { + compatible = "atl,of-led-7seg"; + segment-gpios = < + &led_7seg_gpio 0 0 + &led_7seg_gpio 1 0 + &led_7seg_gpio 2 0 + &led_7seg_gpio 3 0 + &led_7seg_gpio 4 0 + &led_7seg_gpio 5 0 + &led_7seg_gpio 6 0 + &led_7seg_gpio 7 0>; + }; + + poe { + compatible = "atl,periph-poe"; + poe-reset-gpio = <&gpio0 15 GPIO_ACTIVE_HIGH>; + interrupt-parent = <&gpio0>; + interrupts = <20 IRQ_TYPE_EDGE_BOTH>; + }; +}; + +&pciec { + status = "okay"; +}; + +&pcie1 { + status = "okay"; +}; + +&devbus_cs1 { + compatible = "marvell,mvebu-devbus"; + status = "okay"; + + devbus,bus-width = <8>; + devbus,turn-off-ps = <60000>; + devbus,badr-skew-ps = <0>; + devbus,acc-first-ps = <124000>; + devbus,acc-next-ps = <248000>; + devbus,rd-setup-ps = <0>; + devbus,rd-hold-ps = <0>; + + /* Write parameters */ + devbus,sync-enable = <0>; + devbus,wr-high-ps = <60000>; + devbus,wr-low-ps = <60000>; + devbus,ale-wr-ps = <60000>; + + nvs@0 { + status = "okay"; + + compatible = "mtd-ram"; + reg = <0 0x00080000>; + bank-width = <1>; + label = "nvs"; + }; +}; + +&gpio0 { + poe-disable { + gpio-hog; + gpios = <16 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "poe-disable"; + }; +}; + +&gpio1 { + poe-mezz-reset { + gpio-hog; + gpios = <15 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "poe-mezz-reset"; + }; +}; + +&i2c0 { + clock-frequency = <100000>; + status = "okay"; + + mux@71 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "nxp,pca9544"; + reg = <0x71>; + i2c-mux-idle-disconnect; + + i2c@0 { /* POE devices MUX */ + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + rng@3b { + compatible = "maxim,ds2476"; + reg = <0x3b>; + }; + + hwmon@2e { + compatible = "adi,adt7476"; + reg = <0x2e>; + }; + + hwmon@2d { + compatible = "adi,adt7476"; + reg = <0x2d>; + }; + + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + rtc@68 { + compatible = "dallas,ds1340"; + reg = <0x68>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + led_7seg_gpio: gpio@20 { + compatible = "nxp,pca9554"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x20>; + }; + + sfpgpio: gpio@27 { /* I2C to GPIO */ + compatible = "nxp,pca9555"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x27>; + interrupt-parent = <&gpio0>; + interrupts = <13 IRQ_TYPE_LEVEL_LOW>; + }; + + sfpmux: mux@77 { /* SFP I2C MUX */ + #address-cells = <1>; + #size-cells = <0>; + compatible = "nxp,pca9544"; + reg = <0x77>; + i2c-mux-idle-disconnect; + }; + }; + }; +}; + +&spi1 { + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <50000000>; + m25p,fast-read; + + partition@u-boot { + reg = <0x00000000 0x00100000>; + label = "u-boot"; + }; + partition@u-boot-env { + reg = <0x00100000 0x00040000>; + label = "u-boot-env"; + }; + partition@unused { + reg = <0x00140000 0x00e80000>; + label = "unused"; + }; + partition@idprom { + reg = <0x00fc0000 0x00040000>; + label = "idprom"; + }; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&refclk { + clock-frequency = <25000000>; +}; + +&nand_controller { /* 256 MB */ + status = "okay"; + num-cs = <1>; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + marvell,nand-enable-arbiter; + nand-on-flash-bbt; +}; diff --git a/arch/arm/dts/armada-385-atl-x530DP.dts b/arch/arm/dts/armada-385-atl-x530DP.dts new file mode 100644 index 000000000000..2d38bf50b986 --- /dev/null +++ b/arch/arm/dts/armada-385-atl-x530DP.dts @@ -0,0 +1,51 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include "armada-385-atl-x530.dtsi" +#include "armada-385-atl-x530-u-boot.dtsi" +#include "armada-385-atl-x530DP.dtsi" + +/ { + model = "Allied Telesis x530DP"; + compatible = "alliedtelesis,x530DP", "alliedtelesis,x530", "marvell,armada385", "marvell,armada380"; + + nand-protect { + compatible = "atl,nand-protect"; + protect-gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>; + }; + + usb-enable { + compatible = "atl,usb-enable"; + enable-gpio = <&gpio0 19 GPIO_ACTIVE_HIGH>; + }; + + boot-board { + compatible = "atl,boot-board"; + present-gpio = <&gpio0 24 GPIO_ACTIVE_HIGH>; + override-gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>; + }; + + phy-reset { + compatible = "atl,phy-reset"; + reset-gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>, + <&gpio1 21 GPIO_ACTIVE_HIGH>; + }; + + led-enable { + compatible = "atl,led-enable"; + enable-gpio = <&gpio1 17 GPIO_ACTIVE_HIGH>; + }; + + led_7seg { + compatible = "atl,of-led-7seg"; + segment-gpios = < + &led_7seg_gpio 0 0 + &led_7seg_gpio 1 0 + &led_7seg_gpio 2 0 + &led_7seg_gpio 3 0 + &led_7seg_gpio 4 0 + &led_7seg_gpio 5 0 + &led_7seg_gpio 6 0 + &led_7seg_gpio 7 0>; + }; +}; diff --git a/arch/arm/dts/armada-385-atl-x530DP.dtsi b/arch/arm/dts/armada-385-atl-x530DP.dtsi new file mode 100644 index 000000000000..977eb4ee54fe --- /dev/null +++ b/arch/arm/dts/armada-385-atl-x530DP.dtsi @@ -0,0 +1,149 @@ +// SPDX-License-Identifier: GPL-2.0 + +&i2c0 { + mux@71 { + compatible = "nxp,pca9548"; + + i2c@1 { + hwmon@2c { + compatible = "ti,lm87"; + reg = <0x2c>; + }; + + hwmon@2d { + compatible = "ti,lm87"; + reg = <0x2d>; + }; + + hwmon@2e { + pwm-polarity = <1>; + }; + }; + + psu_a_adapter: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + psu_b_adapter: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + + misc_gpio: gpio@26 { + compatible = "nxp,pca9555"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x26>; + interrupt-parent = <&gpio0>; + interrupts = <5 IRQ_TYPE_LEVEL_LOW>; + status = "okay"; + interrupt-controller; + #interrupt-cells = <2>; + + psu_bank2 { + gpio-hog; + gpios = <0 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "psu-bank2"; + }; + }; + }; + }; +}; + +/ { + psu_slot_a { + compatible = "atl,dts-overlay-gpio-psu-slot"; + slot-name = "PSU Bay A"; + board-index = <1>; + present-gpio = <&misc_gpio 1 GPIO_ACTIVE_LOW>; + output-ok-gpio = <&gpio1 16 GPIO_ACTIVE_HIGH>; + interrupt-parent = <&misc_gpio>; + interrupts = <1 IRQ_TYPE_EDGE_BOTH>; + overlay = <&psu_a_overlay>; + }; + + psu_slot_b { + compatible = "atl,dts-overlay-gpio-psu-slot"; + slot-name = "PSU Bay B"; + board-index = <2>; + present-gpio = <&misc_gpio 2 GPIO_ACTIVE_LOW>; + output-ok-gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>; + interrupt-parent = <&misc_gpio>; + interrupts = <2 IRQ_TYPE_EDGE_BOTH>; + overlay = <&psu_b_overlay>; + }; + + fan_slot_a { + compatible = "atl,fan05-slot"; + slot-name = "Fan Bay A"; + board-index = <3>; + present-gpio = <&misc_gpio 3 GPIO_ACTIVE_LOW>; + fault-gpio = <&misc_gpio 11 GPIO_ACTIVE_LOW>; + interrupt-parent = <&misc_gpio>; + interrupts = <3 IRQ_TYPE_EDGE_BOTH>; + overlay = <&fan_a_overlay>; + }; +}; + +/ { + psu_a_overlay: psu_a { + fragment@0 { + target = <&psu_a_adapter>; + __overlay__ { + #address-cells = <1>; + #size-cells = <0>; + + psu@51 { + compatible = "atl,atl-pwr-gen2"; + reg = <0x51>; + board-index = <1>; + }; + }; + }; + }; +}; + +/ { + psu_b_overlay: psu_b { + fragment@0 { + target = <&psu_b_adapter>; + __overlay__ { + #address-cells = <1>; + #size-cells = <0>; + + psu@51 { + compatible = "atl,atl-pwr-gen2"; + reg = <0x51>; + board-index = <2>; + }; + }; + }; + }; +}; + +/ { + fan_a_overlay:fan_a { + fragment@1 { + target-path = "/"; + __overlay__ { + fan@1 { + compatible = "atl,fan05"; + board-index = <3>; + module-id-gpios = + <&misc_gpio 4 GPIO_ACTIVE_HIGH>, + <&misc_gpio 5 GPIO_ACTIVE_HIGH>, + <&misc_gpio 6 GPIO_ACTIVE_HIGH>; + }; + }; + }; + }; +}; diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig index d1f71338ac2a..7dda04e0e34e 100644 --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig @@ -132,6 +132,10 @@ config TARGET_CONTROLCENTERDC bool "Support CONTROLCENTERDC" select 88F6820 +config TARGET_X530 + bool "Support Allied Telesis x530" + select 88F6820 + endchoice config SYS_BOARD @@ -149,6 +153,7 @@ config SYS_BOARD default "maxbcm" if TARGET_MAXBCM default "theadorable" if TARGET_THEADORABLE default "a38x" if TARGET_CONTROLCENTERDC + default "x530" if TARGET_X530 config SYS_CONFIG_NAME default "clearfog" if TARGET_CLEARFOG @@ -165,6 +170,7 @@ config SYS_CONFIG_NAME default "turris_omnia" if TARGET_TURRIS_OMNIA default "turris_mox" if TARGET_TURRIS_MOX default "controlcenterdc" if TARGET_CONTROLCENTERDC + default "x530" if TARGET_X530 config SYS_VENDOR default "Marvell" if TARGET_DB_MV784MP_GP @@ -179,6 +185,7 @@ config SYS_VENDOR default "CZ.NIC" if TARGET_TURRIS_OMNIA default "CZ.NIC" if TARGET_TURRIS_MOX default "gdsys" if TARGET_CONTROLCENTERDC + default "alliedtelesis" if TARGET_X530 config SYS_SOC default "mvebu" diff --git a/board/alliedtelesis/common/gpio_hog.c b/board/alliedtelesis/common/gpio_hog.c new file mode 100644 index 000000000000..1f87b3ac1b72 --- /dev/null +++ b/board/alliedtelesis/common/gpio_hog.c @@ -0,0 +1,36 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2018 Allied Telesis Labs + */ + +#include <common.h> +#include <dm.h> +#include <asm/gpio.h> + +DECLARE_GLOBAL_DATA_PTR; + +int gpio_hog_list(struct gpio_desc *gpiod, int max_count, + const char *node_name, const char *gpio_name, int value) +{ + int node; + int count; + int i; + + node = fdt_node_offset_by_compatible(gd->fdt_blob, 0, node_name); + if (node < 0) + return -ENODEV; + + if (!dm_gpio_is_valid(gpiod)) { + count = + gpio_request_list_by_name_nodev(offset_to_ofnode(node), + gpio_name, gpiod, max_count, + GPIOD_IS_OUT); + if (count < 0) + return count; + + for (i = 0; i < count; i++) + dm_gpio_set_value(&gpiod[i], value); + } + + return 0; +} diff --git a/board/alliedtelesis/common/gpio_hog.h b/board/alliedtelesis/common/gpio_hog.h new file mode 100644 index 000000000000..edb744313186 --- /dev/null +++ b/board/alliedtelesis/common/gpio_hog.h @@ -0,0 +1,13 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2017 Allied Telesis Labs + */ + +int gpio_hog_list(struct gpio_desc *gpiod, int max_count, const char *node_name, + const char *gpio_name, int value); + +static inline int gpio_hog(struct gpio_desc *gpiod, const char *node_name, + const char *gpio_name, int value) +{ + return gpio_hog_list(gpiod, 1, node_name, gpio_name, value); +} diff --git a/board/alliedtelesis/x530/MAINTAINERS b/board/alliedtelesis/x530/MAINTAINERS new file mode 100644 index 000000000000..8d2d7271b92c --- /dev/null +++ b/board/alliedtelesis/x530/MAINTAINERS @@ -0,0 +1,12 @@ +x530 BOARD +M: Chris Packham <chris.packham(a)alliedtelesis.co.nz> +S: Maintained +F: board/alliedtelesis/x530/ +F: board/alliedtelesis/common/gpio_hog.c +F: board/alliedtelesis/common/gpio_hog.h +F: arch/arm/dts/armada-385-atl-x530.dts +F: arch/arm/dts/armada-385-atl-x530.dtsi +F: arch/arm/dts/armada-385-atl-x530DP.dts +F: arch/arm/dts/armada-385-atl-x530DP.dtsi +F: include/configs/x530.h +F: configs/x530_defconfig diff --git a/board/alliedtelesis/x530/Makefile b/board/alliedtelesis/x530/Makefile new file mode 100644 index 000000000000..97de1d463fe8 --- /dev/null +++ b/board/alliedtelesis/x530/Makefile @@ -0,0 +1,9 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# Copyright (C) 2017 Allied Telesis Labs +# + +obj-y := $(BOARD).o +ifndef CONFIG_SPL_BUILD +obj-y += ../common/gpio_hog.o +endif diff --git a/board/alliedtelesis/x530/kwbimage.cfg b/board/alliedtelesis/x530/kwbimage.cfg new file mode 100644 index 000000000000..f58d388825e7 --- /dev/null +++ b/board/alliedtelesis/x530/kwbimage.cfg @@ -0,0 +1,12 @@ +# +# Copyright (C) 2017 Allied Telesis Labs +# + +# Armada XP uses version 1 image format +VERSION 1 + +# Boot Media configurations +BOOT_FROM spi + +# Binary Header (bin_hdr) with DDR3 training code +BINARY spl/u-boot-spl-dtb.bin 0000005b 00000068 diff --git a/board/alliedtelesis/x530/x530.c b/board/alliedtelesis/x530/x530.c new file mode 100644 index 000000000000..b34ae5134547 --- /dev/null +++ b/board/alliedtelesis/x530/x530.c @@ -0,0 +1,161 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2017 Allied Telesis Labs + */ + +#include <common.h> +#include <command.h> +#include <dm.h> +#include <i2c.h> +#include <asm/gpio.h> +#include <linux/mbus.h> +#include <linux/io.h> +#include <asm/arch/cpu.h> +#include <asm/arch/soc.h> +#include "../common/gpio_hog.h" + +#include "../drivers/ddr/marvell/a38x/ddr3_init.h" +#include <../serdes/a38x/high_speed_env_spec.h> + +DECLARE_GLOBAL_DATA_PTR; + +#define MVEBU_DEV_BUS_BASE (MVEBU_REGISTER(0x10400)) + +#define CONFIG_NVS_LOCATION 0xf4800000 +#define CONFIG_NVS_SIZE (512 << 10) + +static struct serdes_map board_serdes_map[] = { + {PEX0, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0}, + {DEFAULT_SERDES, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0}, + {PEX1, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0}, + {DEFAULT_SERDES, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0}, + {DEFAULT_SERDES, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0}, + {DEFAULT_SERDES, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0} +}; + +int hws_board_topology_load(struct serdes_map **serdes_map_array, u8 *count) +{ + *serdes_map_array = board_serdes_map; + *count = ARRAY_SIZE(board_serdes_map); + return 0; +} + +/* + * Define the DDR layout / topology here in the board file. This will + * be used by the DDR3 init code in the SPL U-Boot version to configure + * the DDR3 controller. + */ +static struct mv_ddr_topology_map board_topology_map = { + DEBUG_LEVEL_ERROR, + 0x1, /* active interfaces */ + /* cs_mask, mirror, dqs_swap, ck_swap X PUPs */ + { { { {0x1, 0, 0, 0}, + {0x1, 0, 0, 0}, + {0x1, 0, 0, 0}, + {0x1, 0, 0, 0}, + {0x1, 0, 0, 0} }, + SPEED_BIN_DDR_1866M, /* speed_bin */ + MV_DDR_DEV_WIDTH_16BIT, /* sdram device width */ + MV_DDR_DIE_CAP_4GBIT, /* die capacity */ + MV_DDR_FREQ_933, /* frequency */ + 0, 0, /* cas_l cas_wl */ + MV_DDR_TEMP_LOW, /* temperature */ + MV_DDR_TIM_2T} }, /* timing */ + BUS_MASK_32BIT_ECC, /* subphys mask */ + MV_DDR_CFG_DEFAULT, /* ddr configuration data source */ + { {0} }, /* raw spd data */ + {0} /* timing parameters */ +}; + +struct mv_ddr_topology_map *mv_ddr_topology_map_get(void) +{ + /* Return the board topology as defined in the board code */ + return &board_topology_map; +} + +int board_early_init_f(void) +{ + /* Configure MPP */ + writel(0x00001111, MVEBU_MPP_BASE + 0x00); + writel(0x00000000, MVEBU_MPP_BASE + 0x04); + writel(0x55000000, MVEBU_MPP_BASE + 0x08); + writel(0x55550550, MVEBU_MPP_BASE + 0x0c); + writel(0x55555555, MVEBU_MPP_BASE + 0x10); + writel(0x00100565, MVEBU_MPP_BASE + 0x14); + writel(0x40000000, MVEBU_MPP_BASE + 0x18); + writel(0x00004444, MVEBU_MPP_BASE + 0x1c); + + return 0; +} + +int board_init(void) +{ + /* address of boot parameters */ + gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100; + + /* window for NVS */ + mbus_dt_setup_win(&mbus_state, CONFIG_NVS_LOCATION, CONFIG_NVS_SIZE, + CPU_TARGET_DEVICEBUS_BOOTROM_SPI, CPU_ATTR_DEV_CS1); + + /* DEV_READYn is not needed for NVS, ignore it when accessing CS1 */ + writel(0x00004001, MVEBU_DEV_BUS_BASE + 0xc8); + + return 0; +} + +static int led_7seg_init(unsigned int segments) +{ + int node; + int ret; + int i; + struct gpio_desc desc[8]; + + node = fdt_node_offset_by_compatible(gd->fdt_blob, 0, + "atl,of-led-7seg"); + if (node < 0) + return -ENODEV; + + ret = gpio_request_list_by_name_nodev(offset_to_ofnode(node), + "segment-gpios", desc, + ARRAY_SIZE(desc), GPIOD_IS_OUT); + if (ret < 0) + return ret; + + for (i = 0; i < ARRAY_SIZE(desc); i++) { + ret = dm_gpio_set_value(&desc[i], !(segments & BIT(i))); + if (ret) + return ret; + } + + return 0; +} + +#ifdef CONFIG_MISC_INIT_R +int misc_init_r(void) +{ + static struct gpio_desc usb_en = {}, nand_wp = {}, phy_reset[2] = {}, + led_en = {}; + + gpio_hog(&usb_en, "atl,usb-enable", "enable-gpio", 1); + gpio_hog(&nand_wp, "atl,nand-protect", "protect-gpio", 1); + gpio_hog_list(phy_reset, ARRAY_SIZE(phy_reset), "atl,phy-reset", "reset-gpio", 0); + gpio_hog(&led_en, "atl,led-enable", "enable-gpio", 1); + +#ifdef MTDPARTS_MTDOOPS + env_set("mtdoops", MTDPARTS_MTDOOPS); +#endif + + led_7seg_init(0xff); + + return 0; +} +#endif + +#ifdef CONFIG_DISPLAY_BOARDINFO +int checkboard(void) +{ + puts("Board: " CONFIG_SYS_BOARD "\n"); + + return 0; +} +#endif diff --git a/configs/x530_defconfig b/configs/x530_defconfig new file mode 100644 index 000000000000..22482f8d39be --- /dev/null +++ b/configs/x530_defconfig @@ -0,0 +1,71 @@ +CONFIG_ARM=y +CONFIG_ARCH_MVEBU=y +CONFIG_SYS_TEXT_BASE=0x00800000 +CONFIG_SPL_LIBCOMMON_SUPPORT=y +CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SYS_MALLOC_F_LEN=0x2000 +CONFIG_TARGET_X530=y +CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL=y +CONFIG_DEBUG_UART_BASE=0xd0012000 +CONFIG_DEBUG_UART_CLOCK=250000000 +CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y +CONFIG_DEBUG_UART=y +CONFIG_NR_DRAM_BANKS=2 +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_SILENT_CONSOLE=y +CONFIG_SILENT_U_BOOT_ONLY=y +CONFIG_SILENT_CONSOLE_UPDATE_ON_RELOC=y +CONFIG_MISC_INIT_R=y +CONFIG_CMD_MEMINFO=y +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_SF=y +CONFIG_CMD_SPI=y +CONFIG_CMD_USB=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_DHCP=y +CONFIG_CMD_TFTPPUT=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_TIME=y +CONFIG_CMD_EXT2=y +CONFIG_CMD_EXT4=y +CONFIG_CMD_FAT=y +CONFIG_CMD_FS_GENERIC=y +CONFIG_DEFAULT_DEVICE_TREE="armada-385-atl-x530" +CONFIG_ENV_IS_IN_SPI_FLASH=y +CONFIG_SPL_OF_TRANSLATE=y +CONFIG_BLK=y +CONFIG_DM_GPIO=y +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_MVTWSI=y +CONFIG_I2C_MUX=y +CONFIG_I2C_MUX_PCA954x=y +CONFIG_MISC=y +# CONFIG_MMC is not set +CONFIG_NAND=y +CONFIG_NAND_PXA3XX=y +CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_BAR=y +CONFIG_SPI_FLASH_MACRONIX=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_SST=y +CONFIG_MTD_UBI=y +CONFIG_PCI=y +CONFIG_DM_RTC=y +CONFIG_RTC_DS1307=y +CONFIG_DEBUG_UART_SHIFT=2 +CONFIG_SYS_NS16550=y +CONFIG_KIRKWOOD_SPI=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_STORAGE=y +CONFIG_USB_HOST_ETHER=y +CONFIG_USB_ETHER_ASIX=y +CONFIG_USB_ETHER_ASIX88179=y diff --git a/include/configs/x530.h b/include/configs/x530.h new file mode 100644 index 000000000000..a1ef301d35e0 --- /dev/null +++ b/include/configs/x530.h @@ -0,0 +1,134 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2018 Allied Telesis Labs + */ + +#ifndef _CONFIG_X530_H +#define _CONFIG_X530_H + +/* + * High Level Configuration Options (easy to change) + */ + +#define CONFIG_DISPLAY_BOARDINFO_LATE + +#define CONFIG_SYS_TCLK 250000000 /* 250MHz */ + +/* + * NS16550 Configuration + */ +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_TCLK +#if !defined(CONFIG_DM_SERIAL) +#define CONFIG_SYS_NS16550_REG_SIZE (-4) +#define CONFIG_SYS_NS16550_COM1 MV_UART_CONSOLE_BASE +#endif + +/* + * Serial Port configuration + * The following definitions let you select what serial you want to use + * for your console driver. + */ + +#define CONFIG_CONS_INDEX 1 /*Console on UART0 */ + +/* + * Commands configuration + */ +#define CONFIG_CMD_PCI + +/* NAND */ +#define CONFIG_SYS_NAND_ONFI_DETECTION +#define CONFIG_SYS_NAND_USE_FLASH_BBT +#define CONFIG_SYS_MAX_NAND_DEVICE 1 + +#define BBT_CUSTOM_SCAN +#define BBT_CUSTOM_SCAN_PAGE 0 +#define BBT_CUSTOM_SCAN_POSITION 2048 + +/* SPI NOR flash default params, used by sf commands */ +#define CONFIG_SF_DEFAULT_BUS 1 +#define CONFIG_SF_DEFAULT_SPEED 50000000 +#define CONFIG_SF_DEFAULT_MODE SPI_MODE_3 + +#define MTDIDS_DEFAULT "nand0=nand" +#define MTDPARTS_DEFAULT "mtdparts=nand:240M(user),8M(errlog),8M(nand-bbt)" +#define MTDPARTS_MTDOOPS "errlog" + +/* Partition support */ + +/* Additional FS support/configuration */ + +/* USB/EHCI configuration */ +#define CONFIG_EHCI_IS_TDI + +/* Environment in SPI NOR flash */ +#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS +#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE +#define CONFIG_ENV_OFFSET (1 << 20) /* 1MiB in */ +#define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */ +#define CONFIG_ENV_SECT_SIZE (256 << 10) /* 256KiB sectors */ +#define CONFIG_ENV_ADDR CONFIG_ENV_OFFSET + +#define CONFIG_PHY_MARVELL /* there is a marvell phy */ +#define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */ + +/* PCIe support */ +#ifndef CONFIG_SPL_BUILD +#define CONFIG_PCI_MVEBU +#define CONFIG_PCI_SCAN_SHOW +#endif + +/* NAND */ +#define CONFIG_SYS_NAND_USE_FLASH_BBT +#define CONFIG_SYS_NAND_ONFI_DETECTION +#define CONFIG_CMD_UBI +#define CONFIG_CMD_UBIFS +#define CONFIG_LZO +#define CONFIG_MTD_DEVICE +#define CONFIG_CMD_MTDPARTS + +#define CONFIG_SYS_MALLOC_LEN (4 << 20) + +#include <asm/arch/config.h> + +/* + * Other required minimal configurations + */ +#define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */ +#define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */ + +#define CONFIG_SYS_ALT_MEMTEST + +/* Keep device tree and initrd in low memory so the kernel can access them */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "fdt_high=0x10000000\0" \ + "initrd_high=0x10000000\0" + +#define CONFIG_SYS_LOAD_ADDR 0x1000000 +#define CONFIG_UBI_PART user +#define CONFIG_UBIFS_VOLUME user + +/* SPL */ + +/* Defines for SPL */ +#define CONFIG_SPL_SIZE (140 << 10) +#define CONFIG_SPL_TEXT_BASE 0x40000030 +#define CONFIG_SPL_MAX_SIZE (CONFIG_SPL_SIZE - 0x0030) + +#define CONFIG_SPL_BSS_START_ADDR (0x40000000 + CONFIG_SPL_SIZE) +#define CONFIG_SPL_BSS_MAX_SIZE (16 << 10) + +#ifdef CONFIG_SPL_BUILD +#define CONFIG_SYS_MALLOC_SIMPLE +#endif + +#define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10)) +#define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4) + +/* SPL related SPI defines */ +#define CONFIG_SPL_SPI_LOAD +#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x24000 +#define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_SPI_U_BOOT_OFFS + +#endif /* _CONFIG_X530_H */ -- 2.20.1

2 2

[U-Boot] [PATCH] board: mvebu: drop unused ETH_PHY macro definitions
by Baruch Siach 21 Jan '19

21 Jan '19

These macros are not used anywhere in the boards code. Cc: Chris Packham <chris.packham(a)alliedtelesis.co.nz> Cc: Dirk Eibach <dirk.eibach(a)gdsys.cc> Cc: Mario Six <mario.six(a)gdsys.cc> Cc: Dennis Gilmore <dgilmore(a)redhat.com> Signed-off-by: Baruch Siach <baruch(a)tkos.co.il> --- board/Marvell/db-88f6820-amc/db-88f6820-amc.c | 4 ---- board/Marvell/db-88f6820-gp/db-88f6820-gp.c | 4 ---- board/gdsys/a38x/controlcenterdc.c | 4 ---- board/kobol/helios4/helios4.c | 4 ---- board/solidrun/clearfog/clearfog.c | 4 ---- 5 files changed, 20 deletions(-) diff --git a/board/Marvell/db-88f6820-amc/db-88f6820-amc.c b/board/Marvell/db-88f6820-amc/db-88f6820-amc.c index bc18fe6ddf4a..922576e9d599 100644 --- a/board/Marvell/db-88f6820-amc/db-88f6820-amc.c +++ b/board/Marvell/db-88f6820-amc/db-88f6820-amc.c @@ -16,10 +16,6 @@ DECLARE_GLOBAL_DATA_PTR; -#define ETH_PHY_CTRL_REG 0 -#define ETH_PHY_CTRL_POWER_DOWN_BIT 11 -#define ETH_PHY_CTRL_POWER_DOWN_MASK (1 << ETH_PHY_CTRL_POWER_DOWN_BIT) - /* * Those values and defines are taken from the Marvell U-Boot version * "u-boot-2013.01-2016_T1.0.eng_drop_v10" diff --git a/board/Marvell/db-88f6820-gp/db-88f6820-gp.c b/board/Marvell/db-88f6820-gp/db-88f6820-gp.c index 9368bce26cee..1a0746b9d3d5 100644 --- a/board/Marvell/db-88f6820-gp/db-88f6820-gp.c +++ b/board/Marvell/db-88f6820-gp/db-88f6820-gp.c @@ -16,10 +16,6 @@ DECLARE_GLOBAL_DATA_PTR; -#define ETH_PHY_CTRL_REG 0 -#define ETH_PHY_CTRL_POWER_DOWN_BIT 11 -#define ETH_PHY_CTRL_POWER_DOWN_MASK (1 << ETH_PHY_CTRL_POWER_DOWN_BIT) - /* * Those values and defines are taken from the Marvell U-Boot version * "u-boot-2013.01-2014_T3.0" diff --git a/board/gdsys/a38x/controlcenterdc.c b/board/gdsys/a38x/controlcenterdc.c index 86051aedf8e1..9e448fcd10d9 100644 --- a/board/gdsys/a38x/controlcenterdc.c +++ b/board/gdsys/a38x/controlcenterdc.c @@ -22,10 +22,6 @@ DECLARE_GLOBAL_DATA_PTR; -#define ETH_PHY_CTRL_REG 0 -#define ETH_PHY_CTRL_POWER_DOWN_BIT 11 -#define ETH_PHY_CTRL_POWER_DOWN_MASK (1 << ETH_PHY_CTRL_POWER_DOWN_BIT) - #define DB_GP_88F68XX_GPP_OUT_ENA_LOW 0x7fffffff #define DB_GP_88F68XX_GPP_OUT_ENA_MID 0xffffefff diff --git a/board/kobol/helios4/helios4.c b/board/kobol/helios4/helios4.c index 8c0864bcdd4d..3c3592ecf58b 100644 --- a/board/kobol/helios4/helios4.c +++ b/board/kobol/helios4/helios4.c @@ -17,10 +17,6 @@ DECLARE_GLOBAL_DATA_PTR; -#define ETH_PHY_CTRL_REG 0 -#define ETH_PHY_CTRL_POWER_DOWN_BIT 11 -#define ETH_PHY_CTRL_POWER_DOWN_MASK BIT(ETH_PHY_CTRL_POWER_DOWN_BIT) - /* * Those values and defines are taken from the Marvell U-Boot version * "u-boot-2013.01-15t1-helios4" as well as the upstream config for clearfog diff --git a/board/solidrun/clearfog/clearfog.c b/board/solidrun/clearfog/clearfog.c index 1742aa8921c9..03724fee10c1 100644 --- a/board/solidrun/clearfog/clearfog.c +++ b/board/solidrun/clearfog/clearfog.c @@ -16,10 +16,6 @@ DECLARE_GLOBAL_DATA_PTR; -#define ETH_PHY_CTRL_REG 0 -#define ETH_PHY_CTRL_POWER_DOWN_BIT 11 -#define ETH_PHY_CTRL_POWER_DOWN_MASK (1 << ETH_PHY_CTRL_POWER_DOWN_BIT) - /* * Those values and defines are taken from the Marvell U-Boot version * "u-boot-2013.01-15t1-clearfog" -- 2.19.2

2 2

[U-Boot] [PATCH v2 1/1] arm64: mvebu: defconfig: enable CONFIG_CMD_NVME
by Heinrich Schuchardt 21 Jan '19

21 Jan '19

An NVME drive may be installed on the MACCHIATObin board using the PCIe slot or on the Clearfog Pro using mini a PCI-e slot. With the configuration change it becomes usable. Signed-off-by: Heinrich Schuchardt <xypron.glpk(a)gmx.de> --- configs/clearfog_gt_8k_defconfig | 2 ++ configs/mvebu_db_armada8k_defconfig | 2 ++ configs/mvebu_mcbin-88f8040_defconfig | 2 ++ 3 files changed, 6 insertions(+) diff --git a/configs/clearfog_gt_8k_defconfig b/configs/clearfog_gt_8k_defconfig index 8f766c176be..5f538d6163f 100644 --- a/configs/clearfog_gt_8k_defconfig +++ b/configs/clearfog_gt_8k_defconfig @@ -41,6 +41,7 @@ CONFIG_DM_I2C=y CONFIG_SYS_I2C_MVTWSI=y CONFIG_MISC=y CONFIG_DM_MMC=y +CONFIG_CMD_NVME=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_XENON=y CONFIG_SPI_FLASH=y @@ -50,6 +51,7 @@ CONFIG_SPI_FLASH_STMICRO=y CONFIG_SPI_FLASH_WINBOND=y CONFIG_PHYLIB=y CONFIG_PHY_GIGE=y +CONFIG_NVME=y CONFIG_PCI=y CONFIG_DM_PCI=y CONFIG_PCIE_DW_MVEBU=y diff --git a/configs/mvebu_db_armada8k_defconfig b/configs/mvebu_db_armada8k_defconfig index bb29d2574d2..7b4e7152683 100644 --- a/configs/mvebu_db_armada8k_defconfig +++ b/configs/mvebu_db_armada8k_defconfig @@ -20,6 +20,7 @@ CONFIG_BOARD_EARLY_INIT_F=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_NVME=y CONFIG_CMD_PCI=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y @@ -47,6 +48,7 @@ CONFIG_SPI_FLASH_STMICRO=y CONFIG_PHY_MARVELL=y CONFIG_PHY_GIGE=y CONFIG_MVPP2=y +CONFIG_NVME=y CONFIG_PCI=y CONFIG_DM_PCI=y CONFIG_PCIE_DW_MVEBU=y diff --git a/configs/mvebu_mcbin-88f8040_defconfig b/configs/mvebu_mcbin-88f8040_defconfig index 9df4c51c6f1..882169be2ce 100644 --- a/configs/mvebu_mcbin-88f8040_defconfig +++ b/configs/mvebu_mcbin-88f8040_defconfig @@ -20,6 +20,7 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_NVME=y CONFIG_CMD_PCI=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y @@ -51,6 +52,7 @@ CONFIG_SPI_FLASH_WINBOND=y CONFIG_PHY_MARVELL=y CONFIG_PHY_GIGE=y CONFIG_MVPP2=y +CONFIG_NVME=y CONFIG_PCI=y CONFIG_DM_PCI=y CONFIG_PCIE_DW_MVEBU=y -- 2.19.2

2 2

[U-Boot] [PATCH v3 1/1] arm64: dts: marvell: armada-ap806: reserve PSCI area
by Heinrich Schuchardt 21 Jan '19

21 Jan '19

The memory area [0x4000000-0x4200000[ is occupied by the PSCI firmware. Any attempt to access it from U-Boot leads to an immediate crash. So let's make the same memory reservation as the vendor device tree. Signed-off-by: Heinrich Schuchardt <xypron.glpk(a)gmx.de> --- cf. https://lkml.org/lkml/2018/12/21/253 v3 Move change from armada-8040-mcbin.dts to armada-ap806.dtsi. I only have a MACCHIATObin for testing. But in https://github.com/MarvellEmbeddedProcessors/linux-marvell it is done in the same way. v2 add missing right brace --- arch/arm/dts/armada-ap806.dtsi | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/arch/arm/dts/armada-ap806.dtsi b/arch/arm/dts/armada-ap806.dtsi index ebdee514c0..d28c0822f8 100644 --- a/arch/arm/dts/armada-ap806.dtsi +++ b/arch/arm/dts/armada-ap806.dtsi @@ -64,6 +64,17 @@ method = "smc"; }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + psci-area@4000000 { + reg = <0x0 0x4000000 0x0 0x200000>; + no-map; + }; + }; + ap806 { #address-cells = <2>; #size-cells = <2>; -- 2.19.2

3 2

[U-Boot] [PATCH v4 00/10] Changes for Turris Mox
by Marek Behún 21 Jan '19

21 Jan '19

This is the fourth version of patches for Turris Mox. Changes from previous version: - changed patch subject prefix from board: turris_mox to arm: mvebu: turris_mox as requested by Stefan - added Reviewed-by Stefan - add description of the changes for watchdog in patch 6 - patch 9 reworked to use get_ram_size instead of reading OTP Marek

2 11

[U-Boot] [PATCH v2] ARM: mvebu: sync Armada-38x dts with Linux 4.20
by Chris Packham 21 Jan '19

21 Jan '19

Sync the Armada-38x device tree files with Linux 4.20-rc5. The changes not taken are new compatible strings for the uart and nand flash controller. The nand binding is best updated if/when the mtd/nand infrastructure is updated. Signed-off-by: Chris Packham <judge.packham(a)gmail.com> Reviewed-by: Stefan Roese <sr(a)denx.de> --- I've updated the clearfog and controlcenterdc boards enough for them to compile. In the case of clearfog there are a lot of changes in Linux so it's probably best if the board maintainer looks at what is needed. controlcenterdc isn't in linux so again I've just done enough for compilation. Changes in v2: - Correct comment for SPI CS1 for clearfog (thanks Baruch) arch/arm/dts/armada-380.dtsi | 44 +-- arch/arm/dts/armada-385.dtsi | 63 +---- arch/arm/dts/armada-388-clearfog.dts | 25 +- arch/arm/dts/armada-388.dtsi | 43 +-- arch/arm/dts/armada-38x-controlcenterdc.dts | 68 ++--- arch/arm/dts/armada-38x.dtsi | 283 ++++++++++++-------- 6 files changed, 237 insertions(+), 289 deletions(-) diff --git a/arch/arm/dts/armada-380.dtsi b/arch/arm/dts/armada-380.dtsi index 5102d19cc8f4..cff1269f3fbf 100644 --- a/arch/arm/dts/armada-380.dtsi +++ b/arch/arm/dts/armada-380.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for Marvell Armada 380 SoC. * @@ -6,44 +7,6 @@ * Lior Amsalem <alior(a)marvell.com> * Gregory CLEMENT <gregory.clement(a)free-electrons.com> * Thomas Petazzoni <thomas.petazzoni(a)free-electrons.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include "armada-38x.dtsi" @@ -71,7 +34,7 @@ }; }; - pcie-controller { + pcie { compatible = "marvell,armada-370-pcie"; status = "disabled"; device_type = "pci"; @@ -104,6 +67,7 @@ #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 0x81000000 0 0 0x81000000 0x1 0 1 0>; + bus-range = <0x00 0xff>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; marvell,pcie-port = <0>; @@ -122,6 +86,7 @@ #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 0x81000000 0 0 0x81000000 0x2 0 1 0>; + bus-range = <0x00 0xff>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; marvell,pcie-port = <1>; @@ -140,6 +105,7 @@ #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0 0x81000000 0 0 0x81000000 0x3 0 1 0>; + bus-range = <0x00 0xff>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; marvell,pcie-port = <2>; diff --git a/arch/arm/dts/armada-385.dtsi b/arch/arm/dts/armada-385.dtsi index 8e67d2c083dd..f0022d10c715 100644 --- a/arch/arm/dts/armada-385.dtsi +++ b/arch/arm/dts/armada-385.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for Marvell Armada 385 SoC. * @@ -6,44 +7,6 @@ * Lior Amsalem <alior(a)marvell.com> * Gregory CLEMENT <gregory.clement(a)free-electrons.com> * Thomas Petazzoni <thomas.petazzoni(a)free-electrons.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include "armada-38x.dtsi" @@ -70,13 +33,7 @@ }; soc { - internal-regs { - pinctrl@18000 { - compatible = "marvell,mv88f6820-pinctrl"; - }; - }; - - pcie-controller { + pciec: pcie { compatible = "marvell,armada-370-pcie"; status = "disabled"; device_type = "pci"; @@ -106,7 +63,7 @@ * configured in x4 by the bootloader, then * pcie@4,0 is not available. */ - pcie@1,0 { + pcie1: pcie@1,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x80000 0 0x2000>; reg = <0x0800 0 0 0 0>; @@ -115,6 +72,7 @@ #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 0x81000000 0 0 0x81000000 0x1 0 1 0>; + bus-range = <0x00 0xff>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; marvell,pcie-port = <0>; @@ -124,7 +82,7 @@ }; /* x1 port */ - pcie@2,0 { + pcie2: pcie@2,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; reg = <0x1000 0 0 0 0>; @@ -133,6 +91,7 @@ #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 0x81000000 0 0 0x81000000 0x2 0 1 0>; + bus-range = <0x00 0xff>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; marvell,pcie-port = <1>; @@ -142,7 +101,7 @@ }; /* x1 port */ - pcie@3,0 { + pcie3: pcie@3,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x44000 0 0x2000>; reg = <0x1800 0 0 0 0>; @@ -151,6 +110,7 @@ #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0 0x81000000 0 0 0x81000000 0x3 0 1 0>; + bus-range = <0x00 0xff>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; marvell,pcie-port = <2>; @@ -163,7 +123,7 @@ * x1 port only available when pcie@1,0 is * configured as a x1 port */ - pcie@4,0 { + pcie4: pcie@4,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x48000 0 0x2000>; reg = <0x2000 0 0 0 0>; @@ -172,6 +132,7 @@ #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0 0x81000000 0 0 0x81000000 0x4 0 1 0>; + bus-range = <0x00 0xff>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; marvell,pcie-port = <3>; @@ -182,3 +143,7 @@ }; }; }; + +&pinctrl { + compatible = "marvell,mv88f6820-pinctrl"; +}; diff --git a/arch/arm/dts/armada-388-clearfog.dts b/arch/arm/dts/armada-388-clearfog.dts index 16a47d59e667..a3493ddd4d45 100644 --- a/arch/arm/dts/armada-388-clearfog.dts +++ b/arch/arm/dts/armada-388-clearfog.dts @@ -118,18 +118,7 @@ status = "okay"; }; - spi1: spi@10680 { - /* - * CS0: W25Q32 - * CS1: - * CS2: mikrobus - */ - pinctrl-0 = <&spi1_pins &clearfog_spi1_cs_pins &mikro_spi_pins>; - pinctrl-names = "default"; - status = "okay"; - }; - - usb0: usb3@f8000 { + usb3@f8000 { /* CON7, USB-A port on back of device */ status = "okay"; }; @@ -322,6 +311,18 @@ }; }; +&spi1 { + /* + * Add SPI CS pins for clearfog: + * CS0: W25Q32 + * CS1: + * CS2: mikrobus + */ + pinctrl-0 = <&spi1_pins &mikro_spi_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + /* +#define A38x_CUSTOMER_BOARD_1_MPP16_23 0x00400011 MPP18: gpio ? (pca9655 int?) diff --git a/arch/arm/dts/armada-388.dtsi b/arch/arm/dts/armada-388.dtsi index 564fa5937e25..f3a020ff577e 100644 --- a/arch/arm/dts/armada-388.dtsi +++ b/arch/arm/dts/armada-388.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for Marvell Armada 388 SoC. * @@ -5,39 +6,6 @@ * * Gregory CLEMENT <gregory.clement(a)free-electrons.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without - * any warranty of any kind, whether express or implied. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - * - * * The main difference with the Armada 385 is that the 388 can handle two more * SATA ports. So we can reuse the dtsi of the Armada 385, override the pinctrl * property and the name of the SoC, and add the second SATA host which control @@ -50,13 +18,8 @@ model = "Marvell Armada 388 family SoC"; compatible = "marvell,armada388", "marvell,armada385", "marvell,armada380"; - soc { internal-regs { - pinctrl@18000 { - compatible = "marvell,mv88f6828-pinctrl"; - }; - sata@e0000 { compatible = "marvell,armada-380-ahci"; reg = <0xe0000 0x2000>; @@ -68,3 +31,7 @@ }; }; }; + +&pinctrl { + compatible = "marvell,mv88f6828-pinctrl"; +}; diff --git a/arch/arm/dts/armada-38x-controlcenterdc.dts b/arch/arm/dts/armada-38x-controlcenterdc.dts index 2cc996876a77..ffbd0dcaae47 100644 --- a/arch/arm/dts/armada-38x-controlcenterdc.dts +++ b/arch/arm/dts/armada-38x-controlcenterdc.dts @@ -72,40 +72,6 @@ MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>; internal-regs { - spi0: spi@10600 { - status = "okay"; - sc16is741: sc16is741@0 { - compatible = "nxp,sc16is741"; - reg = <0>; - clocks = <&sc16isclk>; - spi-max-frequency = <4000000>; - interrupt-parent = <&gpio0>; - interrupts = <11 IRQ_TYPE_EDGE_FALLING>; - gpio-controller; - #gpio-cells = <2>; - }; - }; - - spi1: spi@10680 { - status = "okay"; - u-boot,dm-pre-reloc; - spi-flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "n25q016a", "spi-flash"; - reg = <0>; /* Chip select 0 */ - spi-max-frequency = <108000000>; - }; - spi-flash@1 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "n25q128a11", "spi-flash"; - reg = <1>; /* Chip select 1 */ - spi-max-frequency = <108000000>; - u-boot,dm-pre-reloc; - }; - }; - I2C0: i2c@11000 { status = "okay"; clock-frequency = <1000000>; @@ -586,3 +552,37 @@ }; }; }; + +&spi0 { + status = "okay"; + sc16is741: sc16is741@0 { + compatible = "nxp,sc16is741"; + reg = <0>; + clocks = <&sc16isclk>; + spi-max-frequency = <4000000>; + interrupt-parent = <&gpio0>; + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + +&spi1 { + status = "okay"; + u-boot,dm-pre-reloc; + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "n25q016a", "spi-flash"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <108000000>; + }; + spi-flash@1 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "n25q128a11", "spi-flash"; + reg = <1>; /* Chip select 1 */ + spi-max-frequency = <108000000>; + u-boot,dm-pre-reloc; + }; +}; diff --git a/arch/arm/dts/armada-38x.dtsi b/arch/arm/dts/armada-38x.dtsi index 5e5a15855189..72c49beb71a4 100644 --- a/arch/arm/dts/armada-38x.dtsi +++ b/arch/arm/dts/armada-38x.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for Marvell Armada 38x family of SoCs. * @@ -6,44 +7,6 @@ * Lior Amsalem <alior(a)marvell.com> * Gregory CLEMENT <gregory.clement(a)free-electrons.com> * Thomas Petazzoni <thomas.petazzoni(a)free-electrons.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include "skeleton.dtsi" @@ -83,7 +46,7 @@ reg = <MBUS_ID(0x01, 0x1d) 0 0x200000>; }; - devbus-bootcs { + devbus_bootcs: devbus-bootcs { compatible = "marvell,mvebu-devbus"; reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>; ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>; @@ -93,7 +56,7 @@ status = "disabled"; }; - devbus-cs0 { + devbus_cs0: devbus-cs0 { compatible = "marvell,mvebu-devbus"; reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>; ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>; @@ -103,7 +66,7 @@ status = "disabled"; }; - devbus-cs1 { + devbus_cs1: devbus-cs1 { compatible = "marvell,mvebu-devbus"; reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>; ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>; @@ -113,7 +76,7 @@ status = "disabled"; }; - devbus-cs2 { + devbus_cs2: devbus-cs2 { compatible = "marvell,mvebu-devbus"; reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>; ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>; @@ -123,7 +86,7 @@ status = "disabled"; }; - devbus-cs3 { + devbus_cs3: devbus-cs3 { compatible = "marvell,mvebu-devbus"; reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>; ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>; @@ -145,6 +108,10 @@ reg = <0x8000 0x1000>; cache-unified; cache-level = <2>; + arm,double-linefill-incr = <0>; + arm,double-linefill-wrap = <0>; + arm,double-linefill = <0>; + prefetch-data = <1>; }; scu@c000 { @@ -152,6 +119,13 @@ reg = <0xc000 0x58>; }; + timer@c200 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0xc200 0x20>; + interrupts = <GIC_PPI 11 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>; + clocks = <&coreclk 2>; + }; + timer@c600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0xc600 0x20>; @@ -168,32 +142,8 @@ <0xc100 0x100>; }; - spi0: spi@10600 { - compatible = "marvell,armada-380-spi", - "marvell,orion-spi"; - reg = <0x10600 0x50>; - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&coreclk 0>; - status = "disabled"; - }; - - spi1: spi@10680 { - compatible = "marvell,armada-380-spi", - "marvell,orion-spi"; - reg = <0x10680 0x50>; - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&coreclk 0>; - status = "disabled"; - }; - i2c0: i2c@11000 { - compatible = "marvell,mv64xxx-i2c"; + compatible = "marvell,mv78230-a0-i2c", "marvell,mv64xxx-i2c"; reg = <0x11000 0x20>; #address-cells = <1>; #size-cells = <0>; @@ -204,7 +154,7 @@ }; i2c1: i2c@11100 { - compatible = "marvell,mv64xxx-i2c"; + compatible = "marvell,mv78230-a0-i2c", "marvell,mv64xxx-i2c"; reg = <0x11100 0x20>; #address-cells = <1>; #size-cells = <0>; @@ -258,19 +208,6 @@ marvell,function = "i2c0"; }; - nand_pins: nand-pins { - marvell,pins = "mpp22", "mpp34", "mpp23", "mpp33", - "mpp38", "mpp28", "mpp40", "mpp42", - "mpp35", "mpp36", "mpp25", "mpp30", - "mpp32"; - marvell,function = "dev"; - }; - - nand_rb: nand-rb { - marvell,pins = "mpp41"; - marvell,function = "nand"; - }; - mdio_pins: mdio-pins { marvell,pins = "mpp4", "mpp5"; marvell,function = "ge"; @@ -298,6 +235,20 @@ marvell,function = "spi1"; }; + nand_pins: nand-pins { + marvell,pins = "mpp22", "mpp34", "mpp23", + "mpp33", "mpp38", "mpp28", + "mpp40", "mpp42", "mpp35", + "mpp36", "mpp25", "mpp30", + "mpp32"; + marvell,function = "dev"; + }; + + nand_rb: nand-rb { + marvell,pins = "mpp41"; + marvell,function = "nand"; + }; + uart0_pins: uart-pins-0 { marvell,pins = "mpp0", "mpp1"; marvell,function = "ua0"; @@ -338,34 +289,42 @@ }; gpio0: gpio@18100 { - compatible = "marvell,orion-gpio"; - reg = <0x18100 0x40>; + compatible = "marvell,armada-370-gpio", + "marvell,orion-gpio"; + reg = <0x18100 0x40>, <0x181c0 0x08>; + reg-names = "gpio", "pwm"; ngpios = <32>; gpio-controller; #gpio-cells = <2>; + #pwm-cells = <2>; interrupt-controller; #interrupt-cells = <2>; interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&coreclk 0>; }; gpio1: gpio@18140 { - compatible = "marvell,orion-gpio"; - reg = <0x18140 0x40>; + compatible = "marvell,armada-370-gpio", + "marvell,orion-gpio"; + reg = <0x18140 0x40>, <0x181c8 0x08>; + reg-names = "gpio", "pwm"; ngpios = <28>; gpio-controller; #gpio-cells = <2>; + #pwm-cells = <2>; interrupt-controller; #interrupt-cells = <2>; interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&coreclk 0>; }; - system-controller@18200 { + systemc: system-controller@18200 { compatible = "marvell,armada-380-system-controller", "marvell,armada-370-xp-system-controller"; reg = <0x18200 0x100>; @@ -386,7 +345,8 @@ mbusc: mbus-controller@20000 { compatible = "marvell,mbus-controller"; - reg = <0x20000 0x100>, <0x20180 0x20>; + reg = <0x20000 0x100>, <0x20180 0x20>, + <0x20250 0x8>; }; mpic: interrupt-controller@20a00 { @@ -399,7 +359,7 @@ interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>; }; - timer@20300 { + timer: timer@20300 { compatible = "marvell,armada-380-timer", "marvell,armada-xp-timer"; reg = <0x20300 0x30>, <0x21040 0x30>; @@ -413,14 +373,14 @@ clock-names = "nbclk", "fixed"; }; - watchdog@20300 { + watchdog: watchdog@20300 { compatible = "marvell,armada-380-wdt"; reg = <0x20300 0x34>, <0x20704 0x4>, <0x18260 0x4>; clocks = <&coreclk 2>, <&refclk>; clock-names = "nbclk", "fixed"; }; - cpurst@20800 { + cpurst: cpurst@20800 { compatible = "marvell,armada-370-cpu-reset"; reg = <0x20800 0x10>; }; @@ -430,16 +390,37 @@ reg = <0x20d20 0x6c>; }; - coherency-fabric@21010 { + coherencyfab: coherency-fabric@21010 { compatible = "marvell,armada-380-coherency-fabric"; reg = <0x21010 0x1c>; }; - pmsu@22000 { + pmsu: pmsu@22000 { compatible = "marvell,armada-380-pmsu"; reg = <0x22000 0x1000>; }; + /* + * As a special exception to the "order by + * register address" rule, the eth0 node is + * placed here to ensure that it gets + * registered as the first interface, since + * the network subsystem doesn't allow naming + * interfaces using DT aliases. Without this, + * the ordering of interfaces is different + * from the one used in U-Boot and the + * labeling of interfaces on the boards, which + * is very confusing for users. + */ + eth0: ethernet@70000 { + compatible = "marvell,armada-370-neta"; + reg = <0x70000 0x4000>; + interrupts-extended = <&mpic 8>; + clocks = <&gateclk 4>; + tx-csum-limit = <9800>; + status = "disabled"; + }; + eth1: ethernet@30000 { compatible = "marvell,armada-370-neta"; reg = <0x30000 0x4000>; @@ -456,7 +437,7 @@ status = "disabled"; }; - usb@58000 { + usb0: usb@58000 { compatible = "marvell,orion-ehci"; reg = <0x58000 0x500>; interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; @@ -464,8 +445,8 @@ status = "disabled"; }; - xor@60800 { - compatible = "marvell,orion-xor"; + xor0: xor@60800 { + compatible = "marvell,armada-380-xor", "marvell,orion-xor"; reg = <0x60800 0x100 0x60a00 0x100>; clocks = <&gateclk 22>; @@ -484,8 +465,8 @@ }; }; - xor@60900 { - compatible = "marvell,orion-xor"; + xor1: xor@60900 { + compatible = "marvell,armada-380-xor", "marvell,orion-xor"; reg = <0x60900 0x100 0x60b00 0x100>; clocks = <&gateclk 28>; @@ -504,14 +485,6 @@ }; }; - eth0: ethernet@70000 { - compatible = "marvell,armada-370-neta"; - reg = <0x70000 0x4000>; - interrupts-extended = <&mpic 8>; - clocks = <&gateclk 4>; - status = "disabled"; - }; - mdio: mdio@72004 { #address-cells = <1>; #size-cells = <0>; @@ -520,14 +493,29 @@ clocks = <&gateclk 4>; }; - rtc@a3800 { + cesa: crypto@90000 { + compatible = "marvell,armada-38x-crypto"; + reg = <0x90000 0x10000>; + reg-names = "regs"; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gateclk 23>, <&gateclk 21>, + <&gateclk 14>, <&gateclk 16>; + clock-names = "cesa0", "cesa1", + "cesaz0", "cesaz1"; + marvell,crypto-srams = <&crypto_sram0>, + <&crypto_sram1>; + marvell,crypto-sram-size = <0x800>; + }; + + rtc: rtc@a3800 { compatible = "marvell,armada-380-rtc"; reg = <0xa3800 0x20>, <0x184a0 0x0c>; reg-names = "rtc", "rtc-soc"; interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; }; - sata@a8000 { + ahci0: sata@a8000 { compatible = "marvell,armada-380-ahci"; reg = <0xa8000 0x2000>; interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; @@ -535,7 +523,15 @@ status = "disabled"; }; - sata@e0000 { + bm: bm@c8000 { + compatible = "marvell,armada-380-neta-bm"; + reg = <0xc8000 0xac>; + clocks = <&gateclk 13>; + internal-mem = <&bm_bppi>; + status = "disabled"; + }; + + ahci1: sata@e0000 { compatible = "marvell,armada-380-ahci"; reg = <0xe0000 0x2000>; interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; @@ -551,23 +547,23 @@ clock-output-names = "nand"; }; - thermal@e8078 { + thermal: thermal@e8078 { compatible = "marvell,armada380-thermal"; - reg = <0xe4078 0x4>, <0xe4074 0x4>; + reg = <0xe4078 0x4>, <0xe4070 0x8>; status = "okay"; }; - flash@d0000 { + nand_controller: nand-controller@d0000 { compatible = "marvell,armada370-nand","marvell,mvebu-pxa3xx-nand"; reg = <0xd0000 0x54>; #address-cells = <1>; - #size-cells = <1>; + #size-cells = <0>; interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; clocks = <&coredivclk 0>; status = "disabled"; }; - sdhci@d8000 { + sdhci: sdhci@d8000 { compatible = "marvell,armada-380-sdhci"; reg-names = "sdhci", "mbus", "conf-sdio3"; reg = <0xd8000 0x1000>, @@ -579,7 +575,7 @@ status = "disabled"; }; - usb3@f0000 { + usb3_0: usb3@f0000 { compatible = "marvell,armada-380-xhci"; reg = <0xf0000 0x4000>,<0xf4000 0x4000>; interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; @@ -587,7 +583,7 @@ status = "disabled"; }; - usb3@f8000 { + usb3_1: usb3@f8000 { compatible = "marvell,armada-380-xhci"; reg = <0xf8000 0x4000>,<0xfc000 0x4000>; interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; @@ -595,10 +591,63 @@ status = "disabled"; }; }; + + crypto_sram0: sa-sram0 { + compatible = "mmio-sram"; + reg = <MBUS_ID(0x09, 0x19) 0 0x800>; + clocks = <&gateclk 23>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 MBUS_ID(0x09, 0x19) 0 0x800>; + }; + + crypto_sram1: sa-sram1 { + compatible = "mmio-sram"; + reg = <MBUS_ID(0x09, 0x15) 0 0x800>; + clocks = <&gateclk 21>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 MBUS_ID(0x09, 0x15) 0 0x800>; + }; + + bm_bppi: bm-bppi { + compatible = "mmio-sram"; + reg = <MBUS_ID(0x0c, 0x04) 0 0x100000>; + ranges = <0 MBUS_ID(0x0c, 0x04) 0 0x100000>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&gateclk 13>; + no-memory-wc; + status = "disabled"; + }; + + spi0: spi@10600 { + compatible = "marvell,armada-380-spi", + "marvell,orion-spi"; + reg = <MBUS_ID(0xf0, 0x01) 0x10600 0x50>; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&coreclk 0>; + status = "disabled"; + }; + + spi1: spi@10680 { + compatible = "marvell,armada-380-spi", + "marvell,orion-spi"; + reg = <MBUS_ID(0xf0, 0x01) 0x10680 0x50>; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&coreclk 0>; + status = "disabled"; + }; }; clocks { - /* 2 GHz fixed main PLL */ + /* 1 GHz fixed main PLL */ mainpll: mainpll { compatible = "fixed-clock"; #clock-cells = <0>; -- 2.19.2

2 4

[U-Boot] re-use dm data for pre-relocate and post-relocate
by Kever Yang 21 Jan '19

21 Jan '19

Hi Simon, In order to make people easier to maintain a U-Boot for product, we want to re-use the dtb from kernel. Some peripheral like power/pmic and display panel, key, charger which need work in U-Boot and may different in different product, we want to make people only maintain kernel dts, but not one more U-Boot project for all these devices. I want to do this just around the relocate, need to read dtb from storage like emmc/nand/spi, and then use a new dtb for initr_dm after relocate. Here are issues I have met: - The kernel dts may not have a stdout in chosen, we may use earlycon, earlyprintk instead; this lead to U-Boot can not find a serial driver after relocate; - no alias for mmc device which is need by U-Boot but not used in kernel; - not able to init mmc driver twice with current driver; mmc driver not able to work before relocate, no bss for (static int initialized), and hang even if I skip this; mmc driver can init and read dtb before initr_dm, but not able to init again after initr_dm. In fact, I don't think we have to re-init serial driver and mmc driver, and most other driver which need pre-relocate like clock, the only driver I have seem have different use in pre-relocate and post-relocate is video driver(no idea why it have to be pre-relocate, we always have display very late), can we add a tag for re-use the dm driver data for those with pre-relocate ? Thanks, - Kever

2 2

[U-Boot] [PATCH v2] arm64: mvebu: Add basic support for uDPU board
by Vladimir Vid 21 Jan '19

21 Jan '19

This adds initial support for micro-DPU (uDPU) board which is based on Armada-3720 SoC. micro-DPU is the single-port FTTdp "distribution point unit" made by Methode Electronics which offers complete modularity with replaceable SFP modules both for uplink and downlink (G.hn over twisted-pair, G.hn over coax, 1G and 2.5G Ethernet over Cat-5e cable). On-board features: - 512 MiB DDR3 - 2 x 2.5G SFP via HSGMII SERDES interface to the A3720 SoC - USB 2.0 Type-C connector - 4GB eMMC - ETSI TS 101548 reverse powering via twisted pair (RJ45) or coax (F Type) Cc: Luka Perkov <luka.perkov(a)sartura.hr> Cc: Luis Torres <luis.torres(a)methode.com> Cc: Scott Roberts <scott.roberts(a)telus.com> Cc: Paul Arola <paul.arola(a)telus.com> Signed-off-by: Vladimir Vid <vladimir.vid(a)sartura.hr> Cc: Chris Packham <judge.packham(a)gmail.com> Cc: Stefan Roese <sr(a)denx.de> --- v2: - updated compatible string - added 'u-boot,dm-pre-reloc' to spi0 and spi-flash nodes - updated board defconfig (properly with savedefconfig this time) - removed unused PCA driver from defconfig --- arch/arm/dts/Makefile | 1 + arch/arm/dts/armada-3720-uDPU.dts | 199 ++++++++++++++++++++ board/Marvell/mvebu_armada-37xx/MAINTAINERS | 5 + configs/uDPU_defconfig | 95 ++++++++++ 4 files changed, 300 insertions(+) create mode 100644 arch/arm/dts/armada-3720-uDPU.dts create mode 100644 configs/uDPU_defconfig diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index dda4e59491..534dde5484 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -95,6 +95,7 @@ dtb-$(CONFIG_ARCH_MVEBU) += \ armada-3720-db.dtb \ armada-3720-espressobin.dtb \ armada-3720-turris-mox.dtb \ + armada-3720-uDPU.dts \ armada-375-db.dtb \ armada-388-clearfog.dtb \ armada-388-gp.dtb \ diff --git a/arch/arm/dts/armada-3720-uDPU.dts b/arch/arm/dts/armada-3720-uDPU.dts new file mode 100644 index 0000000000..64c89289f8 --- /dev/null +++ b/arch/arm/dts/armada-3720-uDPU.dts @@ -0,0 +1,199 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device tree for the uDPU board. + * Based on Marvell Armada 3720 development board (DB-88F3720-DDR3) + * Copyright (C) 2016 Marvell + * Copyright (C) 2018 Methode + * Copyright (C) 2018 Telus + * + * Vladimir Vid <vladimir.vid(a)sartura.hr> + */ + +/dts-v1/; + +#include "armada-37xx.dtsi" + +/ { + model = "Methode uDPU Board"; + compatible = "methode,udpu"; + + chosen { + stdout-path = "serial0:115200n8"; + bootargs = "console=ttyMV0,115200 earlycon=ar3700_uart,0xd0012000"; + }; + + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + spi0 = &spi0; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000 0x20000000>; + }; + + mdio: mdio@32004 { + #address-cells = <1>; + #size-cells = <0>; + ethphy0: ethernet-phy@0 { + reg = <0>; + }; + ethphy1: ethernet-phy@1 { + reg = <1>; + }; + }; + + scsi: scsi { + compatible = "marvell,mvebu-scsi"; + #address-cells = <1>; + #size-cells = <1>; + max-id = <1>; + max-lun = <1>; + status = "okay"; + }; + + i2c1: i2c@11080 { + compatible = "marvell,armada-3700-i2c", "simple-bus"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x11080 0x80>; + status = "okay"; + }; + + uart1: serial@12200 { + compatible = "marvell,armada-3700-uart-ext"; + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + reg = <0x12200 0x30>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + status = "okay"; + }; + + vcc_sd_reg0: regulator@0 { + compatible = "regulator-gpio"; + regulator-name = "vcc_sd0"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-type = "voltage"; + states = <1800000 0x1 + 3300000 0x0>; + gpios = <&gpiosb 23 GPIO_ACTIVE_HIGH>; + }; + + sfp_eth0: sfp-eth0 { + compatible = "sff,sfp"; + i2c-bus = <&i2c0>; + los-gpio = <&gpiosb 2 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpiosb 3 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&gpiosb 4 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&gpiosb 5 GPIO_ACTIVE_HIGH>; + }; + + sfp_eth1: sfp-eth1 { + compatible = "sff,sfp"; + i2c-bus = <&i2c1>; + sfp,ethernet = <&eth1>; + los-gpio = <&gpiosb 7 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpiosb 8 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&gpiosb 9 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&gpiosb 10 GPIO_ACTIVE_HIGH>; + }; +}; + +&comphy { + phy0 { + phy-type = <PHY_TYPE_SGMII1>; + phy-speed = <PHY_SPEED_1_25G>; + }; + phy1 { + phy-type = <PHY_TYPE_SGMII0>; + phy-speed = <PHY_SPEED_1_25G>; + }; + + phy2 { + phy-type = <PHY_TYPE_USB3_HOST1>; + phy-speed = <PHY_SPEED_5G>; + }; +}; + +&eth0 { + pinctrl-0 = <&pcie_pins>; + status = "okay"; + phy-mode = "sgmii"; + phy = <&ethphy0>; + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&eth1 { + status = "okay"; + phy-mode = "sgmii"; + phy = <&ethphy1>; + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + status = "okay"; +}; + +&spi0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spi_quad_pins>; + u-boot,dm-pre-reloc; + + spi-flash@0 { + u-boot,dm-pre-reloc; + #address-cells = <1>; + #size-cells = <1>; + compatible = "n25q1024a","n25q512a"; + reg = <0>; + spi-max-frequency = <50000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + m25p,fast-read; + + partition@0 { + label = "uboot"; + reg = <0 0x400000>; + }; + }; +}; + +&sdhci1 { + non-removable; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + bus-width = <4>; + vqmmc-supply = <&vcc_sd_reg0>; + pinctrl-names = "default"; + pinctrl-0 = <&sdio_pins>; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + mmccard: mmccard@0 { + compatible = "mmc-card"; + reg = <0>; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + status = "okay"; +}; + +&usb3 { + status = "okay"; +}; diff --git a/board/Marvell/mvebu_armada-37xx/MAINTAINERS b/board/Marvell/mvebu_armada-37xx/MAINTAINERS index 9b0afeef10..f2c0a582d7 100644 --- a/board/Marvell/mvebu_armada-37xx/MAINTAINERS +++ b/board/Marvell/mvebu_armada-37xx/MAINTAINERS @@ -9,3 +9,8 @@ ESPRESSOBin BOARD M: Konstantin Porotchkin <kostap(a)marvell.com> S: Maintained F: configs/mvebu_espressobin-88f3720_defconfig + +uDPU BOARD +M: Vladimir Vid <vladimir.vid(a)sartura.hr> +S: Maintained +F: configs/uDPU_defconfig diff --git a/configs/uDPU_defconfig b/configs/uDPU_defconfig new file mode 100644 index 0000000000..209e73a26f --- /dev/null +++ b/configs/uDPU_defconfig @@ -0,0 +1,95 @@ +CONFIG_ARM=y +CONFIG_ARCH_MVEBU=y +CONFIG_SYS_TEXT_BASE=0x00000000 +CONFIG_SYS_MALLOC_F_LEN=0x2000 +CONFIG_TARGET_MVEBU_ARMADA_37XX=y +CONFIG_DEBUG_UART_BASE=0xd0012000 +CONFIG_DEBUG_UART_CLOCK=25804800 +CONFIG_SMBIOS_PRODUCT_NAME="uDPU" +CONFIG_DEBUG_UART=y +CONFIG_AHCI=y +CONFIG_DISTRO_DEFAULTS=y +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_FIT=y +CONFIG_SPI_BOOT=y +CONFIG_SYS_CONSOLE_INFO_QUIET=y +# CONFIG_DISPLAY_CPUINFO is not set +# CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_ARCH_EARLY_INIT_R=y +CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_SYS_PROMPT="uDPU>> " +# CONFIG_CMD_ELF is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y +CONFIG_CMD_SF=y +CONFIG_CMD_SPI=y +CONFIG_CMD_USB=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_TFTPPUT=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_TIME=y +CONFIG_CMD_MVEBU_BUBT=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_CMD_MTDPARTS=y +CONFIG_MTDIDS_DEFAULT="nor0=spi0" +CONFIG_MTDPARTS_DEFAULT="mtdparts=spi0:4m(uboot),-(rootfs)" +CONFIG_MAC_PARTITION=y +CONFIG_DEFAULT_DEVICE_TREE="armada-3720-uDPU" +CONFIG_ENV_IS_IN_SPI_FLASH=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_AHCI_MVEBU=y +CONFIG_CLK=y +CONFIG_CLK_MVEBU=y +CONFIG_DM_GPIO=y +CONFIG_DM_I2C=y +CONFIG_DM_I2C_GPIO=y +CONFIG_MISC=y +CONFIG_DM_MMC=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_SDMA=y +CONFIG_MMC_SDHCI_MV=y +CONFIG_MMC_SDHCI_XENON=y +CONFIG_MTD=y +CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_BAR=y +CONFIG_SPI_FLASH_MACRONIX=y +CONFIG_SPI_FLASH_SPANSION=y +CONFIG_SPI_FLASH_STMICRO=y +# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set +CONFIG_SPI_FLASH_MTD=y +CONFIG_PHYLIB_10G=y +CONFIG_PHY_MARVELL=y +CONFIG_PHY_GIGE=y +CONFIG_E1000=y +CONFIG_MVNETA=y +CONFIG_PCI=y +CONFIG_DM_PCI=y +CONFIG_PCI_AARDVARK=y +CONFIG_MVEBU_COMPHY_SUPPORT=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_ARMADA_37XX=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_REGULATOR_GPIO=y +# CONFIG_SPL_SERIAL_PRESENT is not set +CONFIG_DEBUG_MVEBU_A3700_UART=y +CONFIG_DEBUG_UART_SHIFT=2 +CONFIG_DEBUG_UART_ANNOUNCE=y +CONFIG_MVEBU_A3700_UART=y +CONFIG_MVEBU_A3700_SPI=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_HOST_ETHER=y +CONFIG_USB_ETHER_ASIX=y +CONFIG_USB_ETHER_MCS7830=y +CONFIG_USB_ETHER_RTL8152=y +CONFIG_USB_ETHER_SMSC95XX=y +CONFIG_LZO=y +CONFIG_SPL_LZO=y -- 2.19.0

2 1