May 2017 - U-Boot

[U-Boot] [U-boot][USB]]USB2.0 device timeout issue.
by Terry Zhou 11 May '17

11 May '17

+ Marek Vasut Best Regards, Terry From: Terry Zhou Sent: 2017年5月10日 15:10 To: u-boot(a)lists.denx.de Cc: Wilson Ding <dingwei(a)marvell.com>; 'Stefan Roese' <sr(a)denx.de>; 'Simon Glass' <sjg(a)chromium.org> Subject: USB2.0 device timeout issue. Hi all, This is Terry from Marvell BSP team in ShangHai China. We got one issue in USB like below: 1) When reading large files(larger than 32M ) from USB2.0 u-disk, two of the disks got the timeout error like below: Marvell>> fatload usb 0:1 0x1000000 got.mkv 0x2000000 reading got.mkv EHCI timed out on TD - token=0x1e008d80 EHCI timed out on TD - token=0x1e008d80 EHCI timed out on TD - token=0x1e008d80 Error reading cluster ** Unable to read file got.mkv ** 2) I did some research on this issue and found that this issue disappear if we set “USB_MAX_XFER_BLK” to a smaller value. /common/usb_storage.c @@ -145,7 +145,7 @@ struct us_data { * limited to 65535 blocks. */ #elif defined(CONFIG_USB_EHCI) -#define USB_MAX_XFER_BLK 65535 +#define USB_MAX_XFER_BLK 8000 3) We also did some test in linux, it works in linux, we found that linux set the max_sectors to 240, and even we set them to a larger value, The maximum value is 512, which is safe compares to the 8000 in Uboot. Reference link for linux: http://www.linux-usb.org/FAQ.html#i5 4) I found in Uboot forum, other guys met the same problem with us, see the link below: https://lists.denx.de/pipermail/u-boot/2016-February/246405.html and there is also some patches to find the optimal value of USB_MAX_XFER_BLK https://www.mail-archive.com/u-boot@lists.denx.de/msg215952.html But these patches have not been pushed to the mainline code. Could you please share your ideas, why we didn’t merge the patches and how should we fix this issue? Thanks. Best Regards, Terry

1 0

[U-Boot] [PATCH V2 1/4] mmc: fsl_esdhc: introduce vs18_enable for 1.8V fix I/O
by Peng Fan 11 May '17

11 May '17

When using eMMC with 1.8V I/O, the VSELECT bit need to be set in the USDHC controller when init. This patch adds a parameter "vs18_enable" in fsl_esdhc_cfg structure and priv data, so each controller can have different settings. We could not use CONFIG_SYS_FSL_ESDHC_FORCE_VSELECT, it has problem that it will apply to all USDHC controllers and it only set the 1.8V at init phase. So if user does not select to the eMMC device, the voltage on the I/O pins are not correct. Signed-off-by: Peng Fan <peng.fan(a)nxp.com> Cc: Jaehoon Chung <jh80.chung(a)samsung.com> Cc: York Sun <york.sun(a)nxp.com> Cc: Stefano Babic <sbabic(a)denx.de> --- V2: None drivers/mmc/fsl_esdhc.c | 9 +++++++++ include/fsl_esdhc.h | 1 + 2 files changed, 10 insertions(+) diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c index f3c6358..bddfe24 100644 --- a/drivers/mmc/fsl_esdhc.c +++ b/drivers/mmc/fsl_esdhc.c @@ -92,6 +92,7 @@ struct fsl_esdhc { * @dev: pointer for the device * @non_removable: 0: removable; 1: non-removable * @wp_enable: 1: enable checking wp; 0: no check + * @vs18_enable: 1: use 1.8V voltage; 0: use 3.3V * @cd_gpio: gpio for card detection * @wp_gpio: gpio for write protection */ @@ -104,6 +105,7 @@ struct fsl_esdhc_priv { struct udevice *dev; int non_removable; int wp_enable; + int vs18_enable; #ifdef CONFIG_DM_GPIO struct gpio_desc cd_gpio; struct gpio_desc wp_gpio; @@ -673,6 +675,9 @@ static int esdhc_init(struct mmc *mmc) esdhc_setbits32(&regs->vendorspec, ESDHC_VENDORSPEC_VSELECT); #endif + if (priv->vs18_enable) + esdhc_setbits32(&regs->vendorspec, ESDHC_VENDORSPEC_VSELECT); + return 0; } @@ -733,6 +738,7 @@ static int fsl_esdhc_cfg_to_priv(struct fsl_esdhc_cfg *cfg, priv->bus_width = cfg->max_bus_width; priv->sdhc_clk = cfg->sdhc_clk; priv->wp_enable = cfg->wp_enable; + priv->vs18_enable = cfg->vs18_enable; return 0; }; @@ -759,6 +765,9 @@ static int fsl_esdhc_init(struct fsl_esdhc_priv *priv) VENDORSPEC_HCKEN | VENDORSPEC_IPGEN | VENDORSPEC_CKEN); #endif + if (priv->vs18_enable) + esdhc_setbits32(&regs->vendorspec, ESDHC_VENDORSPEC_VSELECT); + writel(SDHCI_IRQ_EN_BITS, &regs->irqstaten); memset(&priv->cfg, 0, sizeof(priv->cfg)); diff --git a/include/fsl_esdhc.h b/include/fsl_esdhc.h index e15d3ae..7a5d653 100644 --- a/include/fsl_esdhc.h +++ b/include/fsl_esdhc.h @@ -178,6 +178,7 @@ struct fsl_esdhc_cfg { u32 sdhc_clk; u8 max_bus_width; u8 wp_enable; + u8 vs18_enable; /* Use 1.8V if set to 1 */ struct mmc_config cfg; }; -- 2.6.2

3 8

[U-Boot] [PATCH] mmc: atmel_sdhci: Enable the quirk SDHCI_QUIRK_WAIT_SEND_CMD
by Wenyou Yang 11 May '17

11 May '17

To fix the timeout of sending the write command, enable the quirk SDHCI_QUIRK_WAIT_SEND_CMD. Signed-off-by: Wenyou Yang <wenyou.yang(a)atmel.com> --- drivers/mmc/atmel_sdhci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mmc/atmel_sdhci.c b/drivers/mmc/atmel_sdhci.c index 852255782f..25f4559f24 100644 --- a/drivers/mmc/atmel_sdhci.c +++ b/drivers/mmc/atmel_sdhci.c @@ -74,7 +74,7 @@ static int atmel_sdhci_probe(struct udevice *dev) host->name = dev->name; host->ioaddr = (void *)dev_get_addr(dev); - host->quirks = 0; + host->quirks = SDHCI_QUIRK_WAIT_SEND_CMD; host->bus_width = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev), "bus-width", 4); -- 2.11.0

3 2

[U-Boot] Pull request: u-boot-mips/master
by Daniel Schwierzeck 11 May '17

11 May '17

Hi Tom, please pull the initial infrastructure and support for Broadcom MIPS SoC's. Travis CI: https://travis-ci.org/danielschwierzeck/u-boot/builds/230779561 The following changes since commit dd9999d5f4d3a0354c959fa3bccc0957a1164bf5: Merge git://git.denx.de/u-boot-dm (2017-05-09 16:11:36 -0400) are available in the git repository at: git://git.denx.de/u-boot-mips.git master for you to fetch changes up to a41481bfcba89d1d8dd8b51faa7775cd3ff1c15f: mips: bmips: enable bcm6328-power-domain driver for BCM6328 and BCM63268 boards (2017-05-10 16:16:09 +0200) ---------------------------------------------------------------- Daniel Schwierzeck (1): MIPS: call debug_uart_init right before board_init_f Álvaro Fernández Rojas (48): u-boot.elf: remove hard-coded arm64 flags u-boot.elf: allow overriding entry symbol MIPS: add support for generating u-boot.elf u-boot.elf: add quiet_cmd_u-boot-elf and cmd_u-boot-elf MIPS: QCA AP121: remove debug_uart_init call MIPS: QCA AP143: remove debug_uart_init call MIPS: tl-wdr4300: remove debug_uart_init call cmd: cpu: fix NULL cpu feature prints sysreset: add syscon-reboot driver MIPS: allow using generic sysreset drivers serial: add serial driver for BCM6345 cmd: cpu: refactor to ensure devices are probed and improve code style cpu: add CPU driver for Broadcom MIPS SoCs ram: add RAM driver for Broadcom MIPS SoCs MIPS: add initial infrastructure for Broadcom MIPS SoCs MIPS: add support for Broadcom MIPS BCM6358 SoC family MIPS: add BMIPS Huawei HG556a board MIPS: add support for Broadcom MIPS BCM6328 SoC family MIPS: add BMIPS Comtrend AR-5387un board MIPS: add support for Broadcom MIPS BCM63268 SoC family MIPS: add BMIPS Comtrend VR-3032u board dm: gpio: add BCM6345 gpio driver mips: bmips: add bcm6345-gpio driver support for BCM6358 mips: bmips: add bcm6345-gpio driver support for BCM6328 mips: bmips: add bcm6345-gpio driver support for BCM63268 mips: bmips: add Huawei HG556a gpio-leds dm: led: add BCM6328 led driver mips: bmips: add bcm6328-led driver support for BCM6328 mips: bmips: add bcm6328-led driver support for BCM63268 mips: bmips: add Comtrend AR-5387un bcm6328-leds mips: bmips: add Comtrend VR-3032u bcm6328-leds dm: led: add BCM6358 led driver mips: bmips: add bcm6358-led driver support for BCM6358 mips: bmips: add NeufBox 4 (Sercomm) board dm: clk: add BCM6345 clock driver mips: bmips: add bcm6345-clk driver support for BCM6358 mips: bmips: add bcm6345-clk driver support for BCM6328 mips: bmips: add bcm6345-clk driver support for BCM63268 mips: bmips: enable bcm6345-clk driver for all BMIPS boards dm: reset: add BCM6345 reset driver mips: bmips: add bcm6345-rst driver support for BCM6358 mips: bmips: add bcm6345-rst driver support for BCM6328 mips: bmips: add bcm6345-rst driver support for BCM63268 mips: bmips: enable bcm6345-reset driver for all BMIPS boards dm: power: domain: add BCM6328 power domain driver mips: bmips: add bcm6328-power-domain driver support for BCM6328 mips: bmips: add bcm6328-power-domain driver support for BCM63268 mips: bmips: enable bcm6328-power-domain driver for BCM6328 and BCM63268 boards Makefile | 23 +++--- arch/arm/config.mk | 6 ++ arch/mips/Kconfig | 10 +++ arch/mips/Makefile | 1 + arch/mips/config.mk | 2 + arch/mips/cpu/cpu.c | 2 + arch/mips/cpu/start.S | 19 +++++ arch/mips/dts/Makefile | 3 + arch/mips/dts/brcm,bcm63268.dtsi | 143 +++++++++++++++++++++++++++++++++++ arch/mips/dts/brcm,bcm6328.dtsi | 127 +++++++++++++++++++++++++++++++ arch/mips/dts/brcm,bcm6358.dtsi | 140 ++++++++++++++++++++++++++++++++++ arch/mips/dts/comtrend,ar-5387un.dts | 57 ++++++++++++++ arch/mips/dts/comtrend,vr-3032u.dts | 70 +++++++++++++++++ arch/mips/dts/huawei,hg556a.dts | 104 +++++++++++++++++++++++++ arch/mips/dts/sfr,nb4-ser.dts | 93 +++++++++++++++++++++++ arch/mips/mach-bmips/Kconfig | 88 ++++++++++++++++++++++ arch/mips/mach-bmips/Makefile | 5 ++ arch/mips/mach-bmips/dram.c | 37 +++++++++ arch/mips/mach-bmips/include/ioremap.h | 45 +++++++++++ board/comtrend/ar5387un/Kconfig | 12 +++ board/comtrend/ar5387un/MAINTAINERS | 6 ++ board/comtrend/ar5387un/Makefile | 5 ++ board/comtrend/ar5387un/ar-5387un.c | 7 ++ board/comtrend/vr3032u/Kconfig | 12 +++ board/comtrend/vr3032u/MAINTAINERS | 6 ++ board/comtrend/vr3032u/Makefile | 5 ++ board/comtrend/vr3032u/vr-3032u.c | 7 ++ board/huawei/hg556a/Kconfig | 12 +++ board/huawei/hg556a/MAINTAINERS | 6 ++ board/huawei/hg556a/Makefile | 5 ++ board/huawei/hg556a/hg556a.c | 7 ++ board/qca/ap121/ap121.c | 3 - board/qca/ap143/ap143.c | 3 - board/sfr/nb4_ser/Kconfig | 12 +++ board/sfr/nb4_ser/MAINTAINERS | 6 ++ board/sfr/nb4_ser/Makefile | 5 ++ board/sfr/nb4_ser/nb4-ser.c | 7 ++ board/tplink/wdr4300/wdr4300.c | 18 ++++- cmd/cpu.c | 31 ++++---- configs/comtrend_ar5387un_ram_defconfig | 54 +++++++++++++ configs/comtrend_vr3032u_ram_defconfig | 54 +++++++++++++ configs/huawei_hg556a_ram_defconfig | 55 ++++++++++++++ configs/sfr_nb4-ser_ram_defconfig | 56 ++++++++++++++ doc/device-tree-bindings/leds/leds-bcm6328.txt | 106 ++++++++++++++++++++++++++ doc/device-tree-bindings/leds/leds-bcm6358.txt | 141 ++++++++++++++++++++++++++++++++++ drivers/clk/Kconfig | 8 ++ drivers/clk/Makefile | 1 + drivers/clk/clk_bcm6345.c | 78 +++++++++++++++++++ drivers/cpu/Makefile | 2 + drivers/cpu/bmips_cpu.c | 310 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ drivers/gpio/Kconfig | 6 ++ drivers/gpio/Makefile | 1 + drivers/gpio/bcm6345_gpio.c | 125 ++++++++++++++++++++++++++++++ drivers/led/Kconfig | 19 +++++ drivers/led/Makefile | 2 + drivers/led/led_bcm6328.c | 262 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ drivers/led/led_bcm6358.c | 227 +++++++++++++++++++++++++++++++++++++++++++++++++++++++ drivers/power/domain/Kconfig | 7 ++ drivers/power/domain/Makefile | 1 + drivers/power/domain/bcm6328-power-domain.c | 83 ++++++++++++++++++++ drivers/ram/Makefile | 1 + drivers/ram/bmips_ram.c | 126 +++++++++++++++++++++++++++++++ drivers/reset/Kconfig | 6 ++ drivers/reset/Makefile | 1 + drivers/reset/reset-bcm6345.c | 89 ++++++++++++++++++++++ drivers/serial/Kconfig | 14 ++++ drivers/serial/Makefile | 1 + drivers/serial/serial_bcm6345.c | 300 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ drivers/sysreset/Kconfig | 8 ++ drivers/sysreset/Makefile | 1 + drivers/sysreset/sysreset_syscon.c | 78 +++++++++++++++++++ include/configs/bmips_bcm63268.h | 25 ++++++ include/configs/bmips_bcm6328.h | 25 ++++++ include/configs/bmips_bcm6358.h | 30 ++++++++ include/configs/bmips_common.h | 23 ++++++ include/configs/comtrend_ar5387un.h | 17 +++++ include/configs/comtrend_vr3032u.h | 17 +++++ include/configs/huawei_hg556a.h | 20 +++++ include/configs/sfr_nb4_ser.h | 20 +++++ include/dt-bindings/clock/bcm63268-clock.h | 52 +++++++++++++ include/dt-bindings/clock/bcm6328-clock.h | 25 ++++++ include/dt-bindings/clock/bcm6358-clock.h | 24 ++++++ include/dt-bindings/power-domain/bcm63268-power-domain.h | 25 ++++++ include/dt-bindings/power-domain/bcm6328-power-domain.h | 21 ++++++ include/dt-bindings/reset/bcm63268-reset.h | 32 ++++++++ include/dt-bindings/reset/bcm6328-reset.h | 24 ++++++ include/dt-bindings/reset/bcm6358-reset.h | 21 ++++++ 87 files changed, 3737 insertions(+), 37 deletions(-) create mode 100644 arch/mips/dts/brcm,bcm63268.dtsi create mode 100644 arch/mips/dts/brcm,bcm6328.dtsi create mode 100644 arch/mips/dts/brcm,bcm6358.dtsi create mode 100644 arch/mips/dts/comtrend,ar-5387un.dts create mode 100644 arch/mips/dts/comtrend,vr-3032u.dts create mode 100644 arch/mips/dts/huawei,hg556a.dts create mode 100644 arch/mips/dts/sfr,nb4-ser.dts create mode 100644 arch/mips/mach-bmips/Kconfig create mode 100644 arch/mips/mach-bmips/Makefile create mode 100644 arch/mips/mach-bmips/dram.c create mode 100644 arch/mips/mach-bmips/include/ioremap.h create mode 100644 board/comtrend/ar5387un/Kconfig create mode 100644 board/comtrend/ar5387un/MAINTAINERS create mode 100644 board/comtrend/ar5387un/Makefile create mode 100644 board/comtrend/ar5387un/ar-5387un.c create mode 100644 board/comtrend/vr3032u/Kconfig create mode 100644 board/comtrend/vr3032u/MAINTAINERS create mode 100644 board/comtrend/vr3032u/Makefile create mode 100644 board/comtrend/vr3032u/vr-3032u.c create mode 100644 board/huawei/hg556a/Kconfig create mode 100644 board/huawei/hg556a/MAINTAINERS create mode 100644 board/huawei/hg556a/Makefile create mode 100644 board/huawei/hg556a/hg556a.c create mode 100644 board/sfr/nb4_ser/Kconfig create mode 100644 board/sfr/nb4_ser/MAINTAINERS create mode 100644 board/sfr/nb4_ser/Makefile create mode 100644 board/sfr/nb4_ser/nb4-ser.c create mode 100644 configs/comtrend_ar5387un_ram_defconfig create mode 100644 configs/comtrend_vr3032u_ram_defconfig create mode 100644 configs/huawei_hg556a_ram_defconfig create mode 100644 configs/sfr_nb4-ser_ram_defconfig create mode 100644 doc/device-tree-bindings/leds/leds-bcm6328.txt create mode 100644 doc/device-tree-bindings/leds/leds-bcm6358.txt create mode 100644 drivers/clk/clk_bcm6345.c create mode 100644 drivers/cpu/bmips_cpu.c create mode 100644 drivers/gpio/bcm6345_gpio.c create mode 100644 drivers/led/led_bcm6328.c create mode 100644 drivers/led/led_bcm6358.c create mode 100644 drivers/power/domain/bcm6328-power-domain.c create mode 100644 drivers/ram/bmips_ram.c create mode 100644 drivers/reset/reset-bcm6345.c create mode 100644 drivers/serial/serial_bcm6345.c create mode 100644 drivers/sysreset/sysreset_syscon.c create mode 100644 include/configs/bmips_bcm63268.h create mode 100644 include/configs/bmips_bcm6328.h create mode 100644 include/configs/bmips_bcm6358.h create mode 100644 include/configs/bmips_common.h create mode 100644 include/configs/comtrend_ar5387un.h create mode 100644 include/configs/comtrend_vr3032u.h create mode 100644 include/configs/huawei_hg556a.h create mode 100644 include/configs/sfr_nb4_ser.h create mode 100644 include/dt-bindings/clock/bcm63268-clock.h create mode 100644 include/dt-bindings/clock/bcm6328-clock.h create mode 100644 include/dt-bindings/clock/bcm6358-clock.h create mode 100644 include/dt-bindings/power-domain/bcm63268-power-domain.h create mode 100644 include/dt-bindings/power-domain/bcm6328-power-domain.h create mode 100644 include/dt-bindings/reset/bcm63268-reset.h create mode 100644 include/dt-bindings/reset/bcm6328-reset.h create mode 100644 include/dt-bindings/reset/bcm6358-reset.h

2 1

[U-Boot] Please pull u-boot-rockchip
by Simon Glass 11 May '17

11 May '17

Hi Tom, This adds a new firefly-rk3399 board, MIPI support for rk3399 and rk3288, rk818 pmic support, mkimage improvements for rockchip and a few other things. The following changes since commit 05b8dc5cd30a6d6cdfb29c9e718198692e12b4bf: power: twl4030: Remove CONFIG_TWL4030_POWER from include/configs (2017-05-09 20:35:38 -0400) are available in the git repository at: git://git.denx.de/u-boot-rockchip.git for you to fetch changes up to 2085de57f3928d72b27338f68d4250d1fb302d04: rockchip: dts: evb_rk3288: Add mipi display support (2017-05-10 13:37:22 -0600) ---------------------------------------------------------------- Eddie Cai (1): rockchip: enable debug uart Eric Gao (11): rockchip: include: grf: Add GRF register declaration for mipi dsi rockchip: video: Add mipi driver support for rockchip soc rockchip: video: vop: Fix rk_display_init() return error rockchip: video: vop: Add mipi display mode for rk3399 rockchip: video: vop: Set different bitwidth for different display mode rockchip: video: vop: Reserve enough space for mipi dispaly rockchip: board: evb_rk3399: initialize pwm0 for dispaly backlight rockchip: dts: Add mipi dsi support for rk3399 rockchip: defconfigs: Add mipi dsi support for rk3399 evb board rockchip: rk3288: grf: Add grf define for mipi dsi rockchip: dts: evb_rk3288: Add mipi display support Jacob Chen (5): power: pmic: append rk818 regs to rk808 power: pmic: rk808: add RK818 support power: regulator: rk808: replace vsel_bits with vsel_mask power: regulator: rk808: add rk818 support power: rk808: rename to rk8xx Jakob Unterwurzacher (1): rockchip: spi: enable support for the rk_spi driver for the RK3399 Jonas Karlman (2): i2c_eeprom: add read and write functions rockchip: tinker: set ethaddr in late init Kever Yang (15): rockchip: rk3399: use regulators_enable_boot_on() to init regulator mkimage: rockchip: add support for rk3328 rockchip: rk3399: correct memory region rockchip: dts: evb-rk3399: correct pwm3 polarity rockchip: rk3399: use actual dram size rockchip: dts: evb-rk3399: add gmac support rockchip: pinctrl: rk3399: add gmac io strength support rockchip: reserve memory for rk3399 ATF data rockchip: dts: rk3399: sync with kernel dts rockchip: dts: add rk3399-firefly dts power: regulator: pwm: support pwm polarity setting rockchip: pwm: implement pwm_set_invert() doc: dtbinding: add pwm binding file dm: sandbox: pwm: add test for pwm_set_invert() rockchip: add defconfig for firefly-rk3399 Philipp Tomsich (21): rockchip: clk: rk3399: add clock support for SCLK_SPI1 and SCLK_SPI5 rockchip: clk: rk3399: fix off-by one during rate calculation in i2c/spi_set_rate rockchip: spi: rk_spi: dynamically select an module input rate rockchip: spi: rewrite rkspi_set_clk for a more conservative baudrate setting rockchip: pinctrl: rk3399: add support for the SPI5 controller rockchip: spl: rk3399: spi: enable SPL_SPI_LOAD if SPI is enabled for SPL rockchip: mkimage: rkspi: include the header sector in the SPI size calculation rockchip: mkimage: rewrite padding calculation for SD/MMC and SPI images rockchip: mkimage: Update comments for header size rockchip: mkimage: rksd: pad SD/MMC images to a full blocksize rockchip: mkimage: clarify header0 initialisation rockchip: mkimage: play nice with dumpimage rockchip: mkimage: remove placeholder functions from rkimage rockchip: dts: Clean up graffiti in rk3399-sdram-ddr3-1333.dtsi rockchip: dts: rk3399-puma: Add DDR3-1600 timings and use for Puma rockchip: clk: rk3399: adapt MMC clk configuration to the updated RK3399 DTS rockchip: mmc: handle deprecation of 'clock-freq-min-max' rockchip: clk: rk3399: allow requests for PCLK_EFUSE1024NS rockchip: ARM64: puma-rk3399: get DRAM size from DMC init rockchip: clk: rk3399: allow requests for HDMI clocks rockchip: pinctrl: rk3399: add support for the HDMI I2C pins Simon Glass (2): dtoc: Move the output code into its own function dtoc: Handle nodes with phandles that depend on the same Xu Ziyuan (5): mmc: dw_mmc: rockchip: select proper card clock rockchip: clk: rk3036: add ciu_clk entry for eMMC/SDIO rockchip: clk: rk3188: add ciu_clk entry for eMMC/SDMMC/SDIO rockchip: clk: rk3288: add ciu_clk entry for eMMC/SDMMC/SDIO rockchip: clk: rk3328: add ciu_clk entry for eMMC/SDMMC eric.gao(a)rock-chips.com (2): rockchip: video: Kconfig: Add Kconfig for rockchip video driver rockchip: video: Makefile: Modify Makefile for rockchip video driver arch/arm/dts/Makefile | 1 + arch/arm/dts/rk3288-evb.dtsi | 80 ++++ arch/arm/dts/rk3288-tinker.dts | 7 + arch/arm/dts/rk3288.dtsi | 41 ++ arch/arm/dts/rk3399-evb.dts | 118 ++++- arch/arm/dts/rk3399-firefly.dts | 660 ++++++++++++++++++++++++++ arch/arm/dts/rk3399-puma.dts | 6 +- arch/arm/dts/rk3399-sdram-ddr3-1333.dtsi | 8 +- arch/arm/dts/rk3399-sdram-ddr3-1600.dtsi | 1536 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ arch/arm/dts/rk3399.dtsi | 1345 ++++++++++++++++++++++++++++++++++++++++++++-------- arch/arm/include/asm/arch-rockchip/boot0.h | 4 + arch/arm/include/asm/arch-rockchip/grf_rk3288.h | 62 +++ arch/arm/include/asm/arch-rockchip/grf_rk3399.h | 118 ++++- arch/arm/include/asm/arch-rockchip/periph.h | 3 + arch/arm/include/asm/arch-rockchip/rockchip_mipi_dsi.h | 195 ++++++++ arch/arm/include/asm/arch-rockchip/vop_rk3288.h | 1 + arch/arm/mach-rockchip/Kconfig | 8 + arch/arm/mach-rockchip/rk3288-board-spl.c | 6 +- arch/arm/mach-rockchip/rk3288/sdram_rk3288.c | 6 +- arch/arm/mach-rockchip/rk3399/rk3399.c | 8 +- arch/arm/mach-rockchip/rk3399/sdram_rk3399.c | 8 +- board/rockchip/evb_rk3399/evb-rk3399.c | 31 +- board/rockchip/tinker_rk3288/tinker-rk3288.c | 28 ++ board/theobroma-systems/puma_rk3399/puma-rk3399.c | 26 +- configs/chromebit_mickey_defconfig | 5 +- configs/chromebook_jerry_defconfig | 6 +- configs/chromebook_minnie_defconfig | 6 +- configs/evb-rk3399_defconfig | 15 +- configs/fennec-rk3288_defconfig | 4 +- configs/firefly-rk3288_defconfig | 1 + configs/firefly-rk3399_defconfig | 65 +++ configs/miqi-rk3288_defconfig | 1 + configs/popmetal-rk3288_defconfig | 4 +- configs/rock2_defconfig | 1 + configs/sandbox_defconfig | 4 +- configs/sandbox_noblk_defconfig | 4 +- configs/sandbox_spl_defconfig | 4 +- configs/tinker-rk3288_defconfig | 7 +- doc/device-tree-bindings/pwm/pwm.txt | 69 +++ drivers/clk/rockchip/clk_rk3036.c | 5 + drivers/clk/rockchip/clk_rk3188.c | 12 + drivers/clk/rockchip/clk_rk3288.c | 12 + drivers/clk/rockchip/clk_rk3328.c | 8 + drivers/clk/rockchip/clk_rk3399.c | 131 +++++- drivers/misc/i2c_eeprom.c | 32 +- drivers/mmc/rockchip_dw_mmc.c | 24 +- drivers/pinctrl/rockchip/pinctrl_rk3399.c | 61 +++ drivers/power/pmic/Kconfig | 6 +- drivers/power/pmic/Makefile | 2 +- drivers/power/pmic/{rk808.c => rk8xx.c} | 52 +- drivers/power/regulator/Kconfig | 8 +- drivers/power/regulator/Makefile | 2 +- drivers/power/regulator/pwm_regulator.c | 16 +- drivers/power/regulator/{rk808.c => rk8xx.c} | 142 ++++-- drivers/pwm/pwm-uclass.c | 10 + drivers/pwm/rk_pwm.c | 17 +- drivers/pwm/sandbox_pwm.c | 16 + drivers/spi/rk_spi.c | 62 ++- drivers/spi/rk_spi.h | 9 +- drivers/video/Kconfig | 10 +- drivers/video/rockchip/Kconfig | 50 ++ drivers/video/rockchip/Makefile | 8 +- drivers/video/rockchip/rk_mipi.c | 491 +++++++++++++++++++ drivers/video/rockchip/rk_vop.c | 30 +- include/configs/rk3399_common.h | 3 + include/dt-bindings/pinctrl/rockchip.h | 35 +- include/dt-bindings/power/rk3399-power.h | 53 +++ include/i2c_eeprom.h | 24 + include/power/rk808_pmic.h | 77 --- include/power/rk8xx_pmic.h | 193 ++++++++ include/pwm.h | 19 + test/dm/pwm.c | 1 + tools/dtoc/dtoc.py | 149 +++--- tools/rkcommon.c | 80 +++- tools/rkcommon.h | 10 +- tools/rkimage.c | 21 +- tools/rksd.c | 26 +- tools/rkspi.c | 41 +- 78 files changed, 5877 insertions(+), 573 deletions(-) create mode 100644 arch/arm/dts/rk3399-firefly.dts create mode 100644 arch/arm/dts/rk3399-sdram-ddr3-1600.dtsi create mode 100644 arch/arm/include/asm/arch-rockchip/rockchip_mipi_dsi.h create mode 100644 configs/firefly-rk3399_defconfig create mode 100644 doc/device-tree-bindings/pwm/pwm.txt rename drivers/power/pmic/{rk808.c => rk8xx.c} (59%) rename drivers/power/regulator/{rk808.c => rk8xx.c} (55%) create mode 100644 drivers/video/rockchip/Kconfig create mode 100644 drivers/video/rockchip/rk_mipi.c create mode 100644 include/dt-bindings/power/rk3399-power.h delete mode 100644 include/power/rk808_pmic.h create mode 100644 include/power/rk8xx_pmic.h Regards, Simon

2 1

[U-Boot] [ANN] U-Boot v2017.05 is released
by Tom Rini 10 May '17

10 May '17

Hey all, I've released v2017.05 and it's now live on git and FTP and ACD (along with PGP sig file). As I've previously warned, we've now dropped Blackfin, SPARC and OpenRISC architecture support. They can be brought back by a new, active maintainer. I think things are overall continuing to move in the right direction wrt Kconfig migration and I'm going to try and get some more of the TI variables in order and migrated over. Thanks again everyone! -- Tom

3 2

[U-Boot] [PATCH] Kconfig: Drop CONFIG_EMAC_MDIO_PHY_NUM
by Tom Rini 10 May '17

10 May '17

This particular macro hasn't been used in the code for some time, remove these references that were missed. Signed-off-by: Tom Rini <trini(a)konsulko.com> --- include/configs/calimain.h | 1 - include/configs/ea20.h | 1 - include/configs/omapl138_lcdk.h | 1 - include/configs/tam3517-common.h | 1 - scripts/config_whitelist.txt | 1 - 5 files changed, 5 deletions(-) diff --git a/include/configs/calimain.h b/include/configs/calimain.h index 425a38f55197..6e2fd3356323 100644 --- a/include/configs/calimain.h +++ b/include/configs/calimain.h @@ -176,7 +176,6 @@ * Network & Ethernet Configuration */ #ifdef CONFIG_DRIVER_TI_EMAC -#define CONFIG_EMAC_MDIO_PHY_NUM 1 #define CONFIG_MII #define CONFIG_BOOTP_DNS #define CONFIG_BOOTP_DNS2 diff --git a/include/configs/ea20.h b/include/configs/ea20.h index 75100718831d..3a5b5c7285d5 100644 --- a/include/configs/ea20.h +++ b/include/configs/ea20.h @@ -79,7 +79,6 @@ * Network & Ethernet Configuration */ #ifdef CONFIG_DRIVER_TI_EMAC -#define CONFIG_EMAC_MDIO_PHY_NUM 0 #define CONFIG_MII #define CONFIG_BOOTP_DNS #define CONFIG_BOOTP_DNS2 diff --git a/include/configs/omapl138_lcdk.h b/include/configs/omapl138_lcdk.h index 4efddb620746..0cc0042bca3b 100644 --- a/include/configs/omapl138_lcdk.h +++ b/include/configs/omapl138_lcdk.h @@ -227,7 +227,6 @@ * Network & Ethernet Configuration */ #ifdef CONFIG_DRIVER_TI_EMAC -#define CONFIG_EMAC_MDIO_PHY_NUM 7 #define CONFIG_MII #undef CONFIG_DRIVER_TI_EMAC_USE_RMII #define CONFIG_BOOTP_DEFAULT diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h index b1625b779c10..0bdf52eb684a 100644 --- a/include/configs/tam3517-common.h +++ b/include/configs/tam3517-common.h @@ -169,7 +169,6 @@ #define CONFIG_DRIVER_TI_EMAC #define CONFIG_DRIVER_TI_EMAC_USE_RMII #define CONFIG_MII -#define CONFIG_EMAC_MDIO_PHY_NUM 0 #define CONFIG_BOOTP_DNS #define CONFIG_BOOTP_DNS2 #define CONFIG_BOOTP_SEND_HOSTNAME diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index cd0165f9344d..76d2b5a8e8a9 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -776,7 +776,6 @@ CONFIG_EHCI_MMIO_BIG_ENDIAN CONFIG_EHCI_MXS_PORT0 CONFIG_EHCI_MXS_PORT1 CONFIG_ELBC_NAND_SPL_STATIC_PGSIZE -CONFIG_EMAC_MDIO_PHY_NUM CONFIG_EMAC_NR_START CONFIG_EMAC_PHY_MODE CONFIG_EMIF4 -- 1.9.1

1 0

[U-Boot] [PATCH 0/2] power: TWL4030: Move CONFIG_TWL4030_POWER to Kconfig
by Adam Ford 10 May '17

10 May '17

This series will move CONFIG_TWL4030_POWER to Kconfig from include/configs. It will enable it by default when selecting OMAP34XX and remove it from a small handful of include/config files that are not yet using ti_omap3_common.h as well as ti_omap3_common.h. I do not have the other hardware, but I tested this with a Logic PD Torpedo based on a DM3730 (OMAP3630) without issue. Adam Ford (2): power: twl4030: Move CONFIG_TWL4030_POWER to Kconfig power: twl4030: Remove CONFIG_TWL4030_POWER from include/configs arch/arm/Kconfig | 1 + drivers/power/Kconfig | 7 +++++++ include/configs/cm_t35.h | 1 - include/configs/nokia_rx51.h | 1 - include/configs/omap3_evm.h | 1 - include/configs/sniper.h | 6 ------ include/configs/tao3530.h | 1 - include/configs/ti_omap3_common.h | 3 --- include/configs/tricorder.h | 1 - scripts/config_whitelist.txt | 1 - 10 files changed, 8 insertions(+), 15 deletions(-) -- 2.7.4

3 13

[U-Boot] [PATCH] power: twl4030: Add CONFIG_CMD_POWEROFF support
by Adam Ford 10 May '17

10 May '17

With the addition of twl4030_power_off(), let's allow the 'poweroff' command to run this function when CONFIG_CMD_POWEROFF is enabled. Tested on a DM3730 with twl4030 PMIC. Signed-off-by: Adam Ford <aford173(a)gmail.com> diff --git a/drivers/power/twl4030.c b/drivers/power/twl4030.c index 8866bf1..ab98d68 100644 --- a/drivers/power/twl4030.c +++ b/drivers/power/twl4030.c @@ -171,3 +171,12 @@ void twl4030_power_mmc_init(int dev_index) mdelay(100); /* ramp-up delay from Linux code */ } } + +#ifdef CONFIG_CMD_POWEROFF +int do_poweroff(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + twl4030_power_off(); + + return 0; +} +#endif -- 2.7.4

3 5

[U-Boot] [PATCH V2 0/9] Add Device Tree for OMAP3 and omap3_logic
by Adam Ford 10 May '17

10 May '17

This patch series copies the Linux Device trees for the OMAP3 and OMAP3630 platforms as well as some additional device trees to support the Logic PD Torpedo and Logic PD SOM-LV both based on DM3730 (OMAP3630) processors. There are no changes to patches 2-6 from the initial version posted as RFC, but I added "Reviewed-by: Lokesh Vutla <lokeshvutla(a)ti.com>" to patches 2-6 Part 1 Changes the method for the MMC base address offsets to be caluclated. These offsets are different between OMAP3 and am33xx and omap4+. This moves away from an #ifdef method to a method of that uses .compatible to determine the offset. This is needed for OMAP3 device tree support. This rest of this series allows us move to DM_I2C and DM_MMC and push the DM_SERIAL setup to the OF except when in SPL. This should give enough background for other OMAP3 boards to migrate to device tree. The dm uclass dump is as follows: uclass 0: root - * root_driver @ 8df38028, seq 0, (req -1) uclass 9: simple_bus - * ocp@68000000 @ 8df382e0, seq 0, (req -1) - l4@48000000 @ 8df38348 - scm@2000 @ 8df383b0 - scm_conf@270 @ 8df38418 uclass 19: gpio - gpio_omap @ 8df380b0 - gpio_omap @ 8df38108 - gpio_omap @ 8df38160 - gpio_omap @ 8df381b8 - gpio_omap @ 8df38210 - gpio_omap @ 8df38268 - gpio@48310000 @ 8df38480 - gpio@49050000 @ 8df384e8 - gpio@49052000 @ 8df38550 - * gpio@49054000 @ 8df385b8, seq 0, (req -1) - gpio@49056000 @ 8df38620 - gpio@49058000 @ 8df38688 uclass 20: i2c - * i2c@48070000 @ 8df38880, seq 0, (req 0) - i2c@48072000 @ 8df388d8, seq -1, (req 1) - i2c@48060000 @ 8df38930, seq -1, (req 2) uclass 22: i2c_generic - * generic_4b @ 8df4b178, seq 0, (req -1) uclass 31: mmc - * mmc@4809c000 @ 8df389a8, seq 0, (req -1) - * mmc@480ad000 @ 8df38b80, seq 1, (req -1) uclass 52: serial - * serial@4806a000 @ 8df38710, seq 0, (req 0) - serial@4806c000 @ 8df38780, seq -1, (req 1) - serial@49020000 @ 8df387f0, seq -1, (req 2) - serial@49042000 @ 8df38d58, seq -1, (req 3) Adam Ford (9): omap_hsmmc: update struct hsmmc to accommodate omap3 from DT omap3: Copy Device tree from Linux 4.9.y stable omap3630: Copy Device tree from Linux 4.9.y stable ARM: OMAP: I2C: Support New read, write and probe functions for OMAP3 omap3: Copy twl4030 device tree from Linux 4.9.y stable OMAP3: Add SMSC9221 device tree for omap devices connected on GPMC. ARM: DTS: Add Logic PD DM3730 SOM-LV initial support ARM: DTS: Add Logic PD DM3730 Torpedo Device Tree omap3_logic: Add Device Tree Support and more DM drivers arch/arm/dts/Makefile | 4 + arch/arm/dts/logicpd-som-lv-37xx-devkit.dts | 269 ++++ arch/arm/dts/logicpd-som-lv.dtsi | 271 ++++ arch/arm/dts/logicpd-torpedo-37xx-devkit.dts | 411 +++++ arch/arm/dts/logicpd-torpedo-som.dtsi | 217 +++ arch/arm/dts/omap-gpmc-smsc9221.dtsi | 58 + arch/arm/dts/omap3.dtsi | 854 ++++++++++ arch/arm/dts/omap34xx-omap36xx-clocks.dtsi | 268 ++++ .../omap36xx-am35xx-omap3430es2plus-clocks.dtsi | 242 +++ arch/arm/dts/omap36xx-clocks.dtsi | 110 ++ arch/arm/dts/omap36xx-omap3430es2plus-clocks.dtsi | 198 +++ arch/arm/dts/omap36xx.dtsi | 118 ++ arch/arm/dts/omap3xxx-clocks.dtsi | 1665 ++++++++++++++++++++ arch/arm/dts/twl4030.dtsi | 161 ++ arch/arm/dts/twl4030_omap3.dtsi | 42 + arch/arm/include/asm/omap_mmc.h | 3 - board/logicpd/omap3som/README | 19 + board/logicpd/omap3som/omap3logic.c | 18 +- configs/omap3_logic_defconfig | 8 +- drivers/i2c/omap24xx_i2c.c | 1 + drivers/mmc/omap_hsmmc.c | 35 +- include/configs/omap3_logic.h | 25 +- include/dt-bindings/media/omap3-isp.h | 22 + 23 files changed, 4993 insertions(+), 26 deletions(-) create mode 100644 arch/arm/dts/logicpd-som-lv-37xx-devkit.dts create mode 100644 arch/arm/dts/logicpd-som-lv.dtsi create mode 100644 arch/arm/dts/logicpd-torpedo-37xx-devkit.dts create mode 100644 arch/arm/dts/logicpd-torpedo-som.dtsi create mode 100644 arch/arm/dts/omap-gpmc-smsc9221.dtsi create mode 100644 arch/arm/dts/omap3.dtsi create mode 100644 arch/arm/dts/omap34xx-omap36xx-clocks.dtsi create mode 100644 arch/arm/dts/omap36xx-am35xx-omap3430es2plus-clocks.dtsi create mode 100644 arch/arm/dts/omap36xx-clocks.dtsi create mode 100644 arch/arm/dts/omap36xx-omap3430es2plus-clocks.dtsi create mode 100644 arch/arm/dts/omap36xx.dtsi create mode 100644 arch/arm/dts/omap3xxx-clocks.dtsi create mode 100644 arch/arm/dts/twl4030.dtsi create mode 100644 arch/arm/dts/twl4030_omap3.dtsi create mode 100644 board/logicpd/omap3som/README create mode 100644 include/dt-bindings/media/omap3-isp.h -- 2.7.4

4 20