August 2014 - U-Boot

[U-Boot] [PATCH v2] boards.cfg: move many unmaintained boards to Orphan
by Masahiro Yamada 17 Jan '15

17 Jan '15

Emails to the following addresses have been bouncing. Albin Tonnerre <albin.tonnerre(a)free-electrons.com> Anton Shurpin <shurpin.aa(a)niistt.ru> Brent Kandetzki <brentk(a)teleco.com> Dan Malek <dan(a)embeddedalley.com> Frank Panno <fpanno(a)delphintech.com> Gary Jennejohn <garyj(a)denx.de> Hayden Fraser <Hayden.Fraser(a)freescale.com> Eric Millbrandt <emillbrandt(a)dekaresearch.com> Haavard Skinnemoen <haavard.skinnemoen(a)atmel.com> Hans-Christian Egtvedt <hans-christian.egtvedt(a)atmel.com> Kumar Gala <kumar.gala(a)freescale.com> Joe D'Abbraccio <ljd015(a)freescale.com> John Zhan <zhanz(a)sinovee.com> Keith Outwater <Keith_Outwater(a)mvis.com> Julien May <julien.may(a)miromico.ch> Kári Davíðsson <kd(a)flaga.is> Kyle Moffett <Kyle.D.Moffett(a)boeing.com> Leo Sartre <lsartre(a)adeneo-embedded.com> Mike Dunn <mikedunn(a)newsguy.com> Dave Ellis <DGE(a)sixnetio.com> Chan-Taek Park <c-park(a)ti.com> Jerry Van Baren <gerald.vanbaren(a)smiths-aerospace.com> I am Ccing the current working addresses for some of them. If you want to get back an Orphan board to Active, please update your email address. Please do it only if you still have a real hardware to test on. Signed-off-by: Masahiro Yamada <yamada.m(a)jp.panasonic.com> Cc: Albin Tonnerre <albin.tonnerre(a)gmail.com> Cc: Anton Shurpin <anton.shurpin(a)gmail.com> Cc: Brent Kandetzki <brent.kandetzki(a)stw-technic.com> Cc: Dan Malek <dan.malek(a)konsulko.com> Cc: Gary Jennejohn <gljennjohn(a)googlemail.com> Cc: Haavard Skinnemoen <haavard.skinnemoen(a)gmail.com> ? Cc: Hans-Christian Egtvedt <egtvedt(a)samfundet.no> Cc: Kumar Gala <galak(a)kernel.crashing.org> Cc: Mike Dunn <mikedunn(a)newsguy.com> CC: Jerry Van Baren <vanbaren(a)cideas.com> --- Changes in v2: - Add CC of the current working addresses - Orphan "tnetv107xevm" board maintained by Chan-Taek Park <c-park(a)ti.com> because Tom did not respond to my request: https://www.mail-archive.com/u-boot@lists.denx.de/msg139075.html - Orphan "sacsng" board maintained by Jerry Van Baren <gerald.vanbaren(a)smiths-aerospace.com> Ccing his current address Jerry Van Baren <vanbaren(a)cideas.com> boards.cfg | 85 +++++++++++++++++++++++++++++++------------------------------- 1 file changed, 43 insertions(+), 42 deletions(-) diff --git a/boards.cfg b/boards.cfg index 5f6e7bf..535dcca 100644 --- a/boards.cfg +++ b/boards.cfg @@ -59,7 +59,6 @@ Active arm arm1136 mx35 - woodburn Active arm arm1136 mx35 CarMediaLab - flea3 - Stefano Babic <sbabic(a)denx.de> Active arm arm1136 mx35 freescale - mx35pdk - Stefano Babic <sbabic(a)denx.de> Active arm arm1176 bcm2835 raspberrypi rpi_b rpi_b - Stephen Warren <swarren(a)wwwdotorg.org> -Active arm arm1176 tnetv107x ti tnetv107xevm tnetv107x_evm - Chan-Taek Park <c-park(a)ti.com> Active arm arm720t - armltd integrator integratorap_cm720t integratorap:CM720T Linus Walleij <linus.walleij(a)linaro.org> Active arm arm920t - armltd integrator integratorap_cm920t integratorap:CM920T Linus Walleij <linus.walleij(a)linaro.org> Active arm arm920t - armltd integrator integratorcp_cm920t integratorcp:CM920T Linus Walleij <linus.walleij(a)linaro.org> @@ -116,12 +115,6 @@ Active arm arm926ejs at91 bluewater - Active arm arm926ejs at91 bluewater snapper9260 snapper9g20 snapper9260:AT91SAM9G20 Ryan Mallon <ryan(a)bluewatersys.com> Active arm arm926ejs at91 BuS vl_ma2sc vl_ma2sc - Jens Scharsig <esw(a)bus-elektronik.de> Active arm arm926ejs at91 BuS vl_ma2sc vl_ma2sc_ram vl_ma2sc:RAMLOAD Jens Scharsig <esw(a)bus-elektronik.de> -Active arm arm926ejs at91 calao sbc35_a9g20 sbc35_a9g20_eeprom sbc35_a9g20:AT91SAM9G20,SYS_USE_EEPROM Albin Tonnerre <albin.tonnerre(a)free-electrons.com> -Active arm arm926ejs at91 calao sbc35_a9g20 sbc35_a9g20_nandflash sbc35_a9g20:AT91SAM9G20,SYS_USE_NANDFLASH Albin Tonnerre <albin.tonnerre(a)free-electrons.com> -Active arm arm926ejs at91 calao tny_a9260 tny_a9260_eeprom tny_a9260:AT91SAM9260,SYS_USE_EEPROM Albin Tonnerre <albin.tonnerre(a)free-electrons.com> -Active arm arm926ejs at91 calao tny_a9260 tny_a9260_nandflash tny_a9260:AT91SAM9260,SYS_USE_NANDFLASH Albin Tonnerre <albin.tonnerre(a)free-electrons.com> -Active arm arm926ejs at91 calao tny_a9260 tny_a9g20_eeprom tny_a9260:AT91SAM9G20,SYS_USE_EEPROM Albin Tonnerre <albin.tonnerre(a)free-electrons.com> -Active arm arm926ejs at91 calao tny_a9260 tny_a9g20_nandflash tny_a9260:AT91SAM9G20,SYS_USE_NANDFLASH Albin Tonnerre <albin.tonnerre(a)free-electrons.com> Active arm arm926ejs at91 calao usb_a9263 usb_a9263_dataflash usb_a9263:AT91SAM9263,SYS_USE_DATAFLASH Mateusz Kulikowski <mateusz.kulikowski(a)gmail.com> Active arm arm926ejs at91 egnite ethernut5 ethernut5 ethernut5:AT91SAM9XE egnite GmbH <info(a)egnite.de> Active arm arm926ejs at91 emk top9000 top9000eval_xe top9000:EVAL9000 Reinhard Meyer <reinhard.meyer(a)emk-elektronik.de> @@ -320,7 +313,6 @@ Active arm armv7 mx6 boundary nitrogen6x Active arm armv7 mx6 boundary nitrogen6x nitrogen6q2g nitrogen6x:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6q2g.cfg,MX6Q,DDR_MB=2048 Eric Nelson <eric.nelson(a)boundarydevices.com> Active arm armv7 mx6 boundary nitrogen6x nitrogen6s nitrogen6x:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6s.cfg,MX6S,DDR_MB=512 Eric Nelson <eric.nelson(a)boundarydevices.com> Active arm armv7 mx6 boundary nitrogen6x nitrogen6s1g nitrogen6x:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6s1g.cfg,MX6S,DDR_MB=1024 Eric Nelson <eric.nelson(a)boundarydevices.com> -Active arm armv7 mx6 congatec cgtqmx6eval cgtqmx6qeval cgtqmx6eval:IMX_CONFIG=board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg,MX6Q Leo Sartre <lsartre(a)adeneo-embedded.com> Active arm armv7 mx6 embest mx6boards marsboard embestmx6boards:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6q.cfg,MX6Q,DDR_MB=1024,ENV_IS_IN_SPI_FLASH Eric Bénard <eric(a)eukrea.com> Active arm armv7 mx6 embest mx6boards riotboard embestmx6boards:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6s1g.cfg,MX6S,DDR_MB=1024,ENV_IS_IN_MMC Eric Bénard <eric(a)eukrea.com> Active arm armv7 mx6 freescale mx6qarm2 mx6qarm2 mx6qarm2:IMX_CONFIG=board/freescale/mx6qarm2/imximage.cfg Jason Liu <r64343(a)freescale.com> @@ -409,7 +401,6 @@ Active arm pxa - - - Active arm pxa - - - h2200 - Lukasz Dalek <luk0104(a)gmail.com> Active arm pxa - - - palmld - Marek Vasut <marek.vasut(a)gmail.com> Active arm pxa - - - palmtc - Marek Vasut <marek.vasut(a)gmail.com> -Active arm pxa - - - palmtreo680 - Mike Dunn <mikedunn(a)newsguy.com> Active arm pxa - - - pxa255_idp - Cliff Brake <cliff.brake(a)gmail.com> Active arm pxa - - - trizepsiv - Stefano Babic <sbabic(a)denx.de> Active arm pxa - - - xaeniax - - @@ -421,16 +412,10 @@ Active arm pxa - - vpac270 Active arm pxa - icpdas lp8x4x lp8x4x - Sergey Yanovich <ynvich(a)gmail.com> Active arm pxa - toradex - colibri_pxa270 - Marek Vasut <marek.vasut(a)gmail.com> Active arm sa1100 - - - jornada - Kristoffer Ericson <kristoffer.ericson(a)gmail.com> -Active avr32 at32ap at32ap700x atmel - atngw100 - Haavard Skinnemoen <haavard.skinnemoen(a)atmel.com> Active avr32 at32ap at32ap700x atmel - atngw100mkii - Andreas Bießmann <andreas.devel(a)googlemail.com> -Active avr32 at32ap at32ap700x atmel atstk1000 atstk1002 - Haavard Skinnemoen <haavard.skinnemoen(a)atmel.com> -Active avr32 at32ap at32ap700x atmel atstk1000 atstk1003 - Haavard Skinnemoen <haavard.skinnemoen(a)atmel.com> -Active avr32 at32ap at32ap700x atmel atstk1000 atstk1004 - Haavard Skinnemoen <haavard.skinnemoen(a)atmel.com> -Active avr32 at32ap at32ap700x atmel atstk1000 atstk1006 - Haavard Skinnemoen <haavard.skinnemoen(a)atmel.com> -Active avr32 at32ap at32ap700x earthlcd - favr-32-ezkit - Hans-Christian Egtvedt <hans-christian.egtvedt(a)atmel.com> Active avr32 at32ap at32ap700x in-circuit - grasshopper - Andreas Bießmann <andreas.devel(a)googlemail.com> Active avr32 at32ap at32ap700x mimc - mimc200 - Mark Jackson <mpfj(a)mimc.co.uk> -Active avr32 at32ap at32ap700x miromico - hammerhead - Julien May <julien.may(a)miromico.ch>:Alex Raimondi <alex.raimondi(a)miromico.ch> +Active avr32 at32ap at32ap700x miromico - hammerhead - Alex Raimondi <alex.raimondi(a)miromico.ch> Active blackfin blackfin - - - bct-brettl2 - Peter Meerwald <devel(a)bct-electronic.com> Active blackfin blackfin - - - bf506f-ezkit - Sonic Zhang <sonic.adi(a)gmail.com> Active blackfin blackfin - - - bf518f-ezbrd - Sonic Zhang <sonic.adi(a)gmail.com> @@ -447,7 +432,7 @@ Active blackfin blackfin - - - Active blackfin blackfin - - - bf537-stamp - Sonic Zhang <sonic.adi(a)gmail.com> Active blackfin blackfin - - - bf538f-ezkit - Sonic Zhang <sonic.adi(a)gmail.com> Active blackfin blackfin - - - bf548-ezkit - Sonic Zhang <sonic.adi(a)gmail.com> -Active blackfin blackfin - - - bf561-acvilon - Anton Shurpin <shurpin.aa(a)niistt.ru>:Valentin Yakovenkov <yakovenkov(a)niistt.ru> +Active blackfin blackfin - - - bf561-acvilon - Valentin Yakovenkov <yakovenkov(a)niistt.ru> Active blackfin blackfin - - - bf561-ezkit - Sonic Zhang <sonic.adi(a)gmail.com> Active blackfin blackfin - - - bf609-ezkit - Sonic Zhang <sonic.adi(a)gmail.com> Active blackfin blackfin - - - blackstamp - Wojtek Skulski <skulski(a)pas.rochester.edu>:Wojtek Skulski <info(a)skutek.com>:Benjamin Matthews <mben12(a)gmail.com> @@ -455,7 +440,6 @@ Active blackfin blackfin - - - Active blackfin blackfin - - - br4 - Dimitar Penev <dpn(a)switchfin.org> Active blackfin blackfin - - - dnp5370 - M.Hasewinkel (MHA) <info(a)ssv-embedded.de> Active blackfin blackfin - - - ibf-dsp561 - I-SYST Micromodule <support(a)i-syst.com> -Active blackfin blackfin - - - ip04 - Brent Kandetzki <brentk(a)teleco.com> Active blackfin blackfin - - - pr1 - Dimitar Penev <dpn(a)switchfin.org> Active blackfin blackfin - - bf527-ezkit bf527-ezkit-v2 bf527-ezkit:BF527_EZKIT_REV_2_1 Sonic Zhang <sonic.adi(a)gmail.com> Active m68k mcf5227x - freescale m52277evb M52277EVB M52277EVB:SYS_SPANSION_BOOT,SYS_TEXT_BASE=0x00000000 TsiChung Liew <Tsi-Chung.Liew(a)freescale.com> @@ -469,7 +453,6 @@ Active m68k mcf52x2 - esd tasreg Active m68k mcf52x2 - freescale m5208evbe M5208EVBE - - Active m68k mcf52x2 - freescale m5249evb M5249EVB - - Active m68k mcf52x2 - freescale m5253demo M5253DEMO - TsiChung Liew <Tsi-Chung.Liew(a)freescale.com> -Active m68k mcf52x2 - freescale m5253evbe M5253EVBE - Hayden Fraser <Hayden.Fraser(a)freescale.com> Active m68k mcf52x2 - freescale m5272c3 M5272C3 - - Active m68k mcf52x2 - freescale m5275evb M5275EVB - - Active m68k mcf52x2 - freescale m5282evb M5282EVB - - @@ -567,8 +550,6 @@ Active powerpc mpc5xxx - - a3m071 Active powerpc mpc5xxx - - a3m071 a4m2k a3m071:A4M2K Stefan Roese <sr(a)denx.de> Active powerpc mpc5xxx - - a4m072 a4m072 - Sergei Poselenov <sposelenov(a)emcraft.com> Active powerpc mpc5xxx - - bc3450 BC3450 - - -Active powerpc mpc5xxx - - galaxy5200 galaxy5200 galaxy5200:galaxy5200 Eric Millbrandt <emillbrandt(a)dekaresearch.com> -Active powerpc mpc5xxx - - galaxy5200 galaxy5200_LOWBOOT galaxy5200:galaxy5200_LOWBOOT Eric Millbrandt <emillbrandt(a)dekaresearch.com> Active powerpc mpc5xxx - - icecube icecube_5200 IceCube Wolfgang Denk <wd(a)denx.de> Active powerpc mpc5xxx - - icecube icecube_5200_DDR IceCube:MPC5200_DDR - Active powerpc mpc5xxx - - icecube icecube_5200_DDR_LOWBOOT IceCube:SYS_TEXT_BASE=0xFF800000,MPC5200_DDR - @@ -649,11 +630,9 @@ Active powerpc mpc824x - - eXalion Active powerpc mpc824x - - mvblue MVBLUE - - Active powerpc mpc824x - - sandpoint Sandpoint8240 - Wolfgang Denk <wd(a)denx.de> Active powerpc mpc8260 - - - atc - Wolfgang Denk <wd(a)denx.de> -Active powerpc mpc8260 - - - ep8260 - Frank Panno <fpanno(a)delphintech.com> Active powerpc mpc8260 - - - ep82xxm - - Active powerpc mpc8260 - - - gw8260 - Oliver Brown <obrown(a)adventnetworks.com> Active powerpc mpc8260 - - - hymod - Murray Jensen <Murray.Jensen(a)csiro.au> -Active powerpc mpc8260 - - - sacsng - Jerry Van Baren <gerald.vanbaren(a)smiths-aerospace.com> Active powerpc mpc8260 - - cogent cogent_mpc8260 - Murray Jensen <Murray.Jensen(a)csiro.au> Active powerpc mpc8260 - - cpu86 CPU86 - Wolfgang Denk <wd(a)denx.de> Active powerpc mpc8260 - - cpu86 CPU86_ROMBOOT CPU86:BOOT_ROM Wolfgang Denk <wd(a)denx.de> @@ -727,7 +706,6 @@ Active powerpc mpc83xx - freescale mpc8360emds Active powerpc mpc83xx - freescale mpc8360emds MPC8360EMDS_66_SLAVE MPC8360EMDS:CLKIN_66MHZ,PCI,PCISLAVE Dave Liu <daveliu(a)freescale.com> Active powerpc mpc83xx - freescale mpc837xemds MPC837XEMDS - Dave Liu <daveliu(a)freescale.com> Active powerpc mpc83xx - freescale mpc837xemds MPC837XEMDS_HOST MPC837XEMDS:PCI Dave Liu <daveliu(a)freescale.com> -Active powerpc mpc83xx - freescale mpc837xerdb MPC837XERDB - Joe D'Abbraccio <ljd015(a)freescale.com> Active powerpc mpc83xx - ids ids8313 ids8313 ids8313:SYS_TEXT_BASE=0xFFF00000 Heiko Schocher <hs(a)denx.de> Active powerpc mpc83xx - keymile km83xx kmcoge5ne km8360:KMCOGE5NE Holger Brunck <holger.brunck(a)keymile.com> Active powerpc mpc83xx - keymile km83xx kmeter1 km8360:KMETER1 Holger Brunck <holger.brunck(a)keymile.com> @@ -746,7 +724,6 @@ Active powerpc mpc85xx - - sbc8548 Active powerpc mpc85xx - - sbc8548 sbc8548_PCI_66 sbc8548:PCI,66 Paul Gortmaker <paul.gortmaker(a)windriver.com> Active powerpc mpc85xx - - sbc8548 sbc8548_PCI_66_PCIE sbc8548:PCI,66,PCIE Paul Gortmaker <paul.gortmaker(a)windriver.com> Active powerpc mpc85xx - - socrates socrates - - -Active powerpc mpc85xx - exmeritus hww1u1a HWW1U1A - Kyle Moffett <Kyle.D.Moffett(a)boeing.com> Active powerpc mpc85xx - freescale b4860qds B4420QDS B4860QDS:PPC_B4420 - Active powerpc mpc85xx - freescale b4860qds B4420QDS_NAND B4860QDS:PPC_B4420,RAMBOOT_PBL,SPL_FSL_PBL,NAND - Active powerpc mpc85xx - freescale b4860qds B4420QDS_SPIFLASH B4860QDS:PPC_B4420,RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF40000 - @@ -804,16 +781,10 @@ Active powerpc mpc85xx - freescale mpc8536ds Active powerpc mpc85xx - freescale mpc8536ds MPC8536DS_NAND MPC8536DS:NAND - Active powerpc mpc85xx - freescale mpc8536ds MPC8536DS_SDCARD MPC8536DS:SDCARD - Active powerpc mpc85xx - freescale mpc8536ds MPC8536DS_SPIFLASH MPC8536DS:SPIFLASH - -Active powerpc mpc85xx - freescale mpc8540ads MPC8540ADS - Kumar Gala <kumar.gala(a)freescale.com> -Active powerpc mpc85xx - freescale mpc8541cds MPC8541CDS - Kumar Gala <kumar.gala(a)freescale.com> -Active powerpc mpc85xx - freescale mpc8541cds MPC8541CDS_legacy MPC8541CDS:LEGACY Kumar Gala <kumar.gala(a)freescale.com> Active powerpc mpc85xx - freescale mpc8544ds MPC8544DS - - Active powerpc mpc85xx - freescale mpc8548cds MPC8548CDS - - Active powerpc mpc85xx - freescale mpc8548cds MPC8548CDS_36BIT MPC8548CDS:36BIT - Active powerpc mpc85xx - freescale mpc8548cds MPC8548CDS_legacy MPC8548CDS:LEGACY - -Active powerpc mpc85xx - freescale mpc8555cds MPC8555CDS - Kumar Gala <kumar.gala(a)freescale.com> -Active powerpc mpc85xx - freescale mpc8555cds MPC8555CDS_legacy MPC8555CDS:LEGACY Kumar Gala <kumar.gala(a)freescale.com> -Active powerpc mpc85xx - freescale mpc8560ads MPC8560ADS - Kumar Gala <kumar.gala(a)freescale.com> Active powerpc mpc85xx - freescale mpc8568mds MPC8568MDS - - Active powerpc mpc85xx - freescale mpc8569mds MPC8569MDS - - Active powerpc mpc85xx - freescale mpc8569mds MPC8569MDS_ATM MPC8569MDS:ATM - @@ -998,31 +969,22 @@ Active powerpc mpc85xx - gdsys p1022 Active powerpc mpc85xx - gdsys p1022 controlcenterd_TRAILBLAZER_DEVELOP controlcenterd:TRAILBLAZER,SPIFLASH,DEVELOP Dirk Eibach <eibach(a)gdsys.de> Active powerpc mpc85xx - keymile kmp204x kmcoge4 kmp204x:KMCOGE4 Valentin Longchamp <valentin.longchamp(a)keymile.com> Active powerpc mpc85xx - keymile kmp204x kmlion1 kmp204x:KMLION1 Valentin Longchamp <valentin.longchamp(a)keymile.com> -Active powerpc mpc85xx - stx stxgp3 stxgp3 - Dan Malek <dan(a)embeddedalley.com> -Active powerpc mpc85xx - stx stxssa stxssa - Dan Malek <dan(a)embeddedalley.com> -Active powerpc mpc85xx - stx stxssa stxssa_4M stxssa:STXSSA_4M Dan Malek <dan(a)embeddedalley.com> Active powerpc mpc85xx - xes - xpedite520x - - Active powerpc mpc85xx - xes - xpedite537x - - Active powerpc mpc85xx - xes - xpedite550x - - Active powerpc mpc86xx - - - sbc8641d - Paul Gortmaker <paul.gortmaker(a)windriver.com> Active powerpc mpc86xx - freescale mpc8610hpcd MPC8610HPCD - - -Active powerpc mpc86xx - freescale mpc8641hpcn MPC8641HPCN - Kumar Gala <kumar.gala(a)freescale.com> -Active powerpc mpc86xx - freescale mpc8641hpcn MPC8641HPCN_36BIT MPC8641HPCN:PHYS_64BIT Kumar Gala <kumar.gala(a)freescale.com> Active powerpc mpc86xx - xes - xpedite517x - - Active powerpc mpc8xx - - - hermes - Wolfgang Denk <wd(a)denx.de> Active powerpc mpc8xx - - - lwmon - Wolfgang Denk <wd(a)denx.de> Active powerpc mpc8xx - - - quantum - - Active powerpc mpc8xx - - - RRvision - Wolfgang Denk <wd(a)denx.de> Active powerpc mpc8xx - - - spc1920 - - -Active powerpc mpc8xx - - - svm_sc8xx - John Zhan <zhanz(a)sinovee.com> Active powerpc mpc8xx - - - v37 - - Active powerpc mpc8xx - - cogent cogent_mpc8xx - Murray Jensen <Murray.Jensen(a)csiro.au> Active powerpc mpc8xx - - esteem192e ESTEEM192E - Conn Clark <clark(a)esteem.com> Active powerpc mpc8xx - - fads MPC86xADS - - Active powerpc mpc8xx - - fads MPC885ADS - - -Active powerpc mpc8xx - - flagadm FLAGADM - Kári Davíðsson <kd(a)flaga.is> -Active powerpc mpc8xx - - gen860t GEN860T - Keith Outwater <Keith_Outwater(a)mvis.com> -Active powerpc mpc8xx - - gen860t GEN860T_SC GEN860T:SC Keith Outwater <Keith_Outwater(a)mvis.com> Active powerpc mpc8xx - - icu862 ICU862 - Wolfgang Denk <wd(a)denx.de> Active powerpc mpc8xx - - icu862 ICU862_100MHz ICU862:100MHz Wolfgang Denk <wd(a)denx.de> Active powerpc mpc8xx - - ip860 IP860 - Wolfgang Denk <wd(a)denx.de> @@ -1057,7 +1019,6 @@ Active powerpc mpc8xx - - RPXlite_dw Active powerpc mpc8xx - - RPXlite_dw RPXlite_DW_NVRAM_64_LCD RPXlite_DW:RPXlite_64MHz,LCD,NEC_NL6448BC20,ENV_IS_IN_NVRAM - Active powerpc mpc8xx - - RPXlite_dw RPXlite_DW_NVRAM_LCD RPXlite_DW:LCD,NEC_NL6448BC20,ENV_IS_IN_NVRAM - Active powerpc mpc8xx - - RRvision RRvision_LCD RRvision:LCD,SHARP_LQ104V7DS01 Wolfgang Denk <wd(a)denx.de> -Active powerpc mpc8xx - - sixnet SXNI855T - Dave Ellis <DGE(a)sixnetio.com> Active powerpc mpc8xx - - spd8xx SPD823TS - Wolfgang Denk <wd(a)denx.de> Active powerpc mpc8xx - eltec mhpc MHPC - Frank Gottschling <fgottschling(a)eltec.de> Active powerpc mpc8xx - emk top860 TOP860 - Reinhard Meyer <reinhard.meyer(a)emk-elektronik.de> @@ -1068,7 +1029,6 @@ Active powerpc mpc8xx - manroland - Active powerpc mpc8xx - snmc qs850 QS823 - - Active powerpc mpc8xx - snmc qs850 QS850 - - Active powerpc mpc8xx - snmc qs860t QS860T - - -Active powerpc mpc8xx - stx stxxtc stxxtc - Dan Malek <dan(a)embeddedalley.com> Active powerpc mpc8xx - tqc tqm8xx FPS850L - Wolfgang Denk <wd(a)denx.de> Active powerpc mpc8xx - tqc tqm8xx FPS860L - Wolfgang Denk <wd(a)denx.de> Active powerpc mpc8xx - tqc tqm8xx NSCU - - @@ -1219,6 +1179,47 @@ Active sparc leon3 - gaisler - Active sparc leon3 - gaisler - gr_xc3s_1500 - - Active sparc leon3 - gaisler - grsim - - Active x86 x86 coreboot chromebook-x86 coreboot coreboot-x86 coreboot:SYS_TEXT_BASE=0x01110000 Simon Glass <sjg(a)chromium.org> +# The following were moved to "Orphan" in June, 2014 +Orphan arm arm1176 tnetv107x ti tnetv107xevm tnetv107x_evm - Chan-Taek Park <c-park(a)ti.com> +Orphan arm arm926ejs at91 calao sbc35_a9g20 sbc35_a9g20_eeprom sbc35_a9g20:AT91SAM9G20,SYS_USE_EEPROM Albin Tonnerre <albin.tonnerre(a)free-electrons.com> +Orphan arm arm926ejs at91 calao sbc35_a9g20 sbc35_a9g20_nandflash sbc35_a9g20:AT91SAM9G20,SYS_USE_NANDFLASH Albin Tonnerre <albin.tonnerre(a)free-electrons.com> +Orphan arm arm926ejs at91 calao tny_a9260 tny_a9260_eeprom tny_a9260:AT91SAM9260,SYS_USE_EEPROM Albin Tonnerre <albin.tonnerre(a)free-electrons.com> +Orphan arm arm926ejs at91 calao tny_a9260 tny_a9260_nandflash tny_a9260:AT91SAM9260,SYS_USE_NANDFLASH Albin Tonnerre <albin.tonnerre(a)free-electrons.com> +Orphan arm arm926ejs at91 calao tny_a9260 tny_a9g20_eeprom tny_a9260:AT91SAM9G20,SYS_USE_EEPROM Albin Tonnerre <albin.tonnerre(a)free-electrons.com> +Orphan arm arm926ejs at91 calao tny_a9260 tny_a9g20_nandflash tny_a9260:AT91SAM9G20,SYS_USE_NANDFLASH Albin Tonnerre <albin.tonnerre(a)free-electrons.com> +Orphan arm armv7 mx6 congatec cgtqmx6eval cgtqmx6qeval cgtqmx6eval:IMX_CONFIG=board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg,MX6Q Leo Sartre <lsartre(a)adeneo-embedded.com> +Orphan arm pxa - - - palmtreo680 - Mike Dunn <mikedunn(a)newsguy.com> +Orphan avr32 at32ap at32ap700x atmel - atngw100 - Haavard Skinnemoen <haavard.skinnemoen(a)atmel.com> +Orphan avr32 at32ap at32ap700x atmel atstk1000 atstk1002 - Haavard Skinnemoen <haavard.skinnemoen(a)atmel.com> +Orphan avr32 at32ap at32ap700x atmel atstk1000 atstk1003 - Haavard Skinnemoen <haavard.skinnemoen(a)atmel.com> +Orphan avr32 at32ap at32ap700x atmel atstk1000 atstk1004 - Haavard Skinnemoen <haavard.skinnemoen(a)atmel.com> +Orphan avr32 at32ap at32ap700x atmel atstk1000 atstk1006 - Haavard Skinnemoen <haavard.skinnemoen(a)atmel.com> +Orphan avr32 at32ap at32ap700x earthlcd - favr-32-ezkit - Hans-Christian Egtvedt <hans-christian.egtvedt(a)atmel.com> +Orphan blackfin blackfin - - - ip04 - Brent Kandetzki <brentk(a)teleco.com> +Orphan m68k mcf52x2 - freescale m5253evbe M5253EVBE - Hayden Fraser <Hayden.Fraser(a)freescale.com> +Orphan powerpc mpc5xxx - - galaxy5200 galaxy5200 galaxy5200:galaxy5200 Eric Millbrandt <emillbrandt(a)dekaresearch.com> +Orphan powerpc mpc5xxx - - galaxy5200 galaxy5200_LOWBOOT galaxy5200:galaxy5200_LOWBOOT Eric Millbrandt <emillbrandt(a)dekaresearch.com> +Orphan powerpc mpc8260 - - - ep8260 - Frank Panno <fpanno(a)delphintech.com> +Orphan powerpc mpc8260 - - - sacsng - Jerry Van Baren <gerald.vanbaren(a)smiths-aerospace.com> +Orphan powerpc mpc83xx - freescale mpc837xerdb MPC837XERDB - Joe D'Abbraccio <ljd015(a)freescale.com> +Orphan powerpc mpc85xx - exmeritus hww1u1a HWW1U1A - Kyle Moffett <Kyle.D.Moffett(a)boeing.com> +Orphan powerpc mpc85xx - freescale mpc8540ads MPC8540ADS - Kumar Gala <kumar.gala(a)freescale.com> +Orphan powerpc mpc85xx - freescale mpc8541cds MPC8541CDS - Kumar Gala <kumar.gala(a)freescale.com> +Orphan powerpc mpc85xx - freescale mpc8541cds MPC8541CDS_legacy MPC8541CDS:LEGACY Kumar Gala <kumar.gala(a)freescale.com> +Orphan powerpc mpc85xx - freescale mpc8555cds MPC8555CDS - Kumar Gala <kumar.gala(a)freescale.com> +Orphan powerpc mpc85xx - freescale mpc8555cds MPC8555CDS_legacy MPC8555CDS:LEGACY Kumar Gala <kumar.gala(a)freescale.com> +Orphan powerpc mpc85xx - freescale mpc8560ads MPC8560ADS - Kumar Gala <kumar.gala(a)freescale.com> +Orphan powerpc mpc85xx - stx stxgp3 stxgp3 - Dan Malek <dan(a)embeddedalley.com> +Orphan powerpc mpc85xx - stx stxssa stxssa - Dan Malek <dan(a)embeddedalley.com> +Orphan powerpc mpc85xx - stx stxssa stxssa_4M stxssa:STXSSA_4M Dan Malek <dan(a)embeddedalley.com> +Orphan powerpc mpc86xx - freescale mpc8641hpcn MPC8641HPCN - Kumar Gala <kumar.gala(a)freescale.com> +Orphan powerpc mpc86xx - freescale mpc8641hpcn MPC8641HPCN_36BIT MPC8641HPCN:PHYS_64BIT Kumar Gala <kumar.gala(a)freescale.com> +Orphan powerpc mpc8xx - - - svm_sc8xx - John Zhan <zhanz(a)sinovee.com> +Orphan powerpc mpc8xx - - flagadm FLAGADM - Kári Davíðsson <kd(a)flaga.is> +Orphan powerpc mpc8xx - - gen860t GEN860T - Keith Outwater <Keith_Outwater(a)mvis.com> +Orphan powerpc mpc8xx - - gen860t GEN860T_SC GEN860T:SC Keith Outwater <Keith_Outwater(a)mvis.com> +Orphan powerpc mpc8xx - - sixnet SXNI855T - Dave Ellis <DGE(a)sixnetio.com> +Orphan powerpc mpc8xx - stx stxxtc stxxtc - Dan Malek <dan(a)embeddedalley.com> # The following were moved to "Orphan" in April, 2014 Orphan powerpc 74xx_7xx - - evb64260 ZUMA - Nye Liu <nyet(a)zumanetworks.com> Orphan powerpc mpc824x - - musenki MUSENKI - Jim Thompson <jim(a)musenki.com> -- 1.9.1

4 8

[U-Boot] usbtty using i.MX6
by Otavio Salvador 15 Jan '15

15 Jan '15

Hello, I'd like to know if someone has succeed in using usbtty with i.MX6. I am interested in using it for one board but been not succed, it seems: /home/otavio/hacking/u-boot/drivers/serial/usbtty.c:553: undefined reference to `udc_init' drivers/serial/built-in.o: In function `usbtty_init_instances': /home/otavio/hacking/u-boot/drivers/serial/usbtty.c:686: undefined reference to `udc_setup_ep' /home/otavio/hacking/u-boot/drivers/serial/usbtty.c:708: undefined reference to `urb_link_init' /home/otavio/hacking/u-boot/drivers/serial/usbtty.c:709: undefined reference to `urb_link_init' /home/otavio/hacking/u-boot/drivers/serial/usbtty.c:710: undefined reference to `urb_link_init ... Does someone got it working? -- Otavio Salvador O.S. Systems http://www.ossystems.com.br http://code.ossystems.com.br Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750

5 8

[U-Boot] [PATCH v2 0/2] OMAP/GPMC: speed up NAND read access
by Daniel Mack 13 Jan '15

13 Jan '15

Resending this since I got no replies on the first version. I also fixed up the commit log of #1. ------------ I spent some time looking into boot times of AM335x platforms. One big improvement I made came with adding support for GPMC prefetch mode, which gave a speed-up of NAND reads of roughly factor 2. This is what patch #1 does. Note that this is currently limited to read operations in 8-bit mode, but I believe it could be easily extended to 16-bit operations if anyone has hardware to test it on. Using the engine for write mode speed improvements should also be doable, but I didn't spend time on it yet. That can be added as a separate patch later. Patch #2 decreases the GPMC memory map window size from 256MiB to 16MiB. Admittedly, I'm not quite sure about the reason, but a read from offset 0 in this memory area will freeze U-Boot instantly if the size is configured to 256MiB. As contents of the FIFO are accessed in a pseudo-mode from offset 0 anyway, it doesn't really matter. What I also did to further speed up my boot was to tweak the GPMC parameters for the NAND chip on our boards, but that's not part of this patch set, and probably deserves a little more cleanup. Test results and feedback very welcome. Thanks, Daniel Daniel Mack (2): mtd: OMAP: Enable GPMC prefetch mode ARM: omap-common: gpmp: decrease memory region size to 16MiB arch/arm/cpu/armv7/omap-common/mem-common.c | 2 +- doc/README.nand | 5 ++ drivers/mtd/nand/omap_gpmc.c | 115 +++++++++++++++++++++++++++- include/linux/mtd/omap_gpmc.h | 6 +- 4 files changed, 124 insertions(+), 4 deletions(-) -- 1.9.3

5 10

[U-Boot] [PATCH] powerpc/83xx: add support for kmtepr2 board
by Holger Brunck 06 Jan '15

06 Jan '15

From: Christoph Dietrich <christoph.dietrich(a)keymile.com> This board is similar to TUXX1, but it has a different FPGA connected to chipselect 2. Therefore we need a different configuration for this chipselect. Signed-off-by: Christoph Dietrich <christoph.dietrich(a)keymile.com> Signed-off-by: Holger Brunck <holger.brunck(a)keymile.com> cc: Kim Phillips <kim.phillips(a)freescale.com> --- boards.cfg | 1 + include/configs/tuxx1.h | 42 ++++++++++++++++++++++++++++++++++-------- 2 files changed, 35 insertions(+), 8 deletions(-) diff --git a/boards.cfg b/boards.cfg index 1ba2081..7ddf34d 100644 --- a/boards.cfg +++ b/boards.cfg @@ -717,6 +717,7 @@ Active powerpc mpc83xx - keymile km83xx Active powerpc mpc83xx - keymile km83xx kmeter1 km8360:KMETER1 Holger Brunck <holger.brunck(a)keymile.com> Active powerpc mpc83xx - keymile km83xx kmopti2 tuxx1:KMOPTI2 Holger Brunck <holger.brunck(a)keymile.com> Active powerpc mpc83xx - keymile km83xx kmsupx5 tuxx1:KMSUPX5 Heiko Schocher <hs(a)denx.de> +Active powerpc mpc83xx - keymile km83xx kmtepr2 tuxx1:KMTEPR2 Holger Brunck <holger.brunck(a)keymile.com> Active powerpc mpc83xx - keymile km83xx kmvect1 suvd3:KMVECT1 Holger Brunck <holger.brunck(a)keymile.com> Active powerpc mpc83xx - keymile km83xx suvd3 suvd3:SUVD3 Holger Brunck <holger.brunck(a)keymile.com> Active powerpc mpc83xx - keymile km83xx tuge1 tuxx1:TUGE1 Holger Brunck <holger.brunck(a)keymile.com> diff --git a/include/configs/tuxx1.h b/include/configs/tuxx1.h index 08ead7f..a2eb82c 100644 --- a/include/configs/tuxx1.h +++ b/include/configs/tuxx1.h @@ -36,6 +36,9 @@ #elif defined(CONFIG_KMOPTI2) #define CONFIG_KM_BOARD_NAME "kmopti2" #define CONFIG_HOSTNAME kmopti2 +#elif defined(CONFIG_KMTEPR2) +#define CONFIG_KM_BOARD_NAME "kmtepr2" +#define CONFIG_HOSTNAME kmtepr2 #else #error ("Board not supported") #endif @@ -47,21 +50,42 @@ #define CONFIG_SYS_APP1_BASE 0xA0000000 /* PAXG */ #define CONFIG_SYS_APP1_SIZE 256 /* Megabytes */ -#if defined(CONFIG_TUXX1) || defined(CONFIG_KMOPTI2) +#if defined(CONFIG_TUXX1) || defined(CONFIG_KMOPTI2) || defined(CONFIG_KMTEPR2) #define CONFIG_SYS_APP2_BASE 0xB0000000 /* PINC3 */ #define CONFIG_SYS_APP2_SIZE 256 /* Megabytes */ #endif /* - * Init Local Bus Memory Controller: + * Init Local Bus Memory Controller + * All devices use Local bus configuration with 8Bit size and the + * general-purpose chip-select machine (GPCM) otherwise it's + * documented in the table. * Device on - * Bank Bus Machine PortSz Size TUDA1 TUXA1 TUGE1 KMSUPX4 KMOPTI2 - * ---- --- ------- ------ ----- --------------------------------------- - * 2 Local GPCM 8 bit 256MB PAXG LPXF PAXI LPXF PAXE - * 3 Local GPCM 8 bit 256MB PINC3 PINC2 unused unused OPI2(16 bit) - * + * Bank Size TUDA1 TUXA1 TUGE1 KMSUPX4 KMOPTI2 KMTEPR2 + * ---- ----- ------------------------------------------------------- + * 2 256MB PAXG LPXF PAXI LPXF PAXE NVRAM + * 3 256MB PINC3 PINC2 unused unused OPI2(16 bit) TEP2 (16 bit) */ +#if defined(CONFIG_KMTEPRO2) +/* + * Configuration for C2 (NVRAM) on the local bus + */ +#define CONFIG_SYS_LBLAWBAR2_PRELIM CONFIG_SYS_APP1_BASE +#define CONFIG_SYS_LBLAWAR2_PRELIM (LBLAWAR_EN | LBLAWAR_256MB) +#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_APP1_BASE | \ + BR_PS_8 | \ + BR_MS_GPCM | \ + BR_V) +#define CONFIG_SYS_OR2_PRELIM (MEG_TO_AM(CONFIG_SYS_APP1_SIZE) | \ + OR_GPCM_CSNT | \ + OR_GPCM_ACS_DIV2 | \ + OR_GPCM_XACS | \ + OR_GPCM_SCY_2 | \ + OR_GPCM_TRLX_SET | \ + OR_GPCM_EHTR_SET | \ + OR_GPCM_EAD) +#else /* * Configuration for C2 on the local bus */ @@ -82,6 +106,8 @@ OR_GPCM_TRLX_SET | \ OR_GPCM_EHTR_CLEAR | \ OR_GPCM_EAD) +#endif + #if defined(CONFIG_TUXX1) /* * Configuration for C3 on the local bus @@ -108,7 +134,7 @@ MxMR_WLFx_2X) #endif -#if defined(CONFIG_KMOPTI2) +#if defined(CONFIG_KMOPTI2) || defined(CONFIG_KMTEPR2) /* * Configuration for C3 on the local bus */ -- 1.8.0.1

1 2

[U-Boot] [PATCH 0/2] eMMC: support for Read Protected Memory Block (RPMB)
by Pierre Aubert 23 Dec '14

23 Dec '14

This serie of patches adds some functions and a sub-command of 'mmc' for programming the authentication key and for reading and writing the RPMB partition of an eMMC according to the JEDEC standard No. 64-A441 The sub-command rpmb is enabled by the flag CONFIG_SUPPORT_EMMC_RPMB defined in the board configuration file. It has been tested on a SabreSDP iMX6 board. Pierre Aubert (2): eMMC: add support for operations in RPMB partition eMMC: cmd_mmc.c adds the 'rpmb' sub-command for the 'mmc' command common/cmd_mmc.c | 128 ++++++++++++++++++++- drivers/mmc/Makefile | 1 + drivers/mmc/rpmb.c | 317 ++++++++++++++++++++++++++++++++++++++++++++++++++ include/mmc.h | 10 ++- lib/Makefile | 3 + 5 files changed, 457 insertions(+), 2 deletions(-) create mode 100644 drivers/mmc/rpmb.c -- 1.7.6.5

6 30

[U-Boot] [PATCH 0/8] PSCI v0.2 framework for ARMv8
by Arnab Basu 03 Dec '14

03 Dec '14

This series of patches creates a generic PSCI v0.2 framework for ARMv8. The first 3 patches refactor existing code so that ARMv7 PSCI, ARMv8 spin-table and ARMv8 PSCI can coexist. The next 5 patches create a generic framework for PSCI v0.2 in ARMv8. The implementation is modelled on the pre-existing PSCI v0.1 support in ARMv7. PSCI support patches for the ARMv8 Foundation model will follow shortly. Arnab Basu (8): ARM: PSCI: Update psci.h for psci v0.2 ARM: PSCI: Alow arch specific DT patching ARMv8/fsl-lsch3: Refactor spin-table code ARMv8: PSCI: Add linker section to hold PSCI code ARMv8: PCSI: Add generic ARMv8 PSCI code ARMv8: PSCI: Fixup the device tree for PSCI v0.2 ARMv8: PSCI: Setup ARMv8 PSCI ARMv8: PSCI: Enable SMC arch/arm/config.mk | 2 +- arch/arm/cpu/armv7/virt-dt.c | 7 +- arch/arm/cpu/armv8/Makefile | 2 + arch/arm/cpu/armv8/cpu-dt.c | 128 ++++++++++++++++++++++++++ arch/arm/cpu/armv8/cpu.c | 23 +++++ arch/arm/cpu/armv8/fsl-lsch3/fdt.c | 46 +++------ arch/arm/cpu/armv8/psci.S | 177 ++++++++++++++++++++++++++++++++++++ arch/arm/cpu/armv8/u-boot.lds | 30 ++++++ arch/arm/include/asm/macro.h | 4 + arch/arm/include/asm/psci.h | 42 ++++++++- arch/arm/include/asm/system.h | 7 ++ arch/arm/lib/bootm-fdt.c | 11 ++- arch/arm/lib/bootm.c | 3 + 13 files changed, 446 insertions(+), 36 deletions(-) create mode 100644 arch/arm/cpu/armv8/cpu-dt.c create mode 100644 arch/arm/cpu/armv8/psci.S -- 1.7.7.4

7 32

[U-Boot] [PATCH 1/3] sf: stmicro: Add support for N25Q32
by Michal Simek 02 Dec '14

02 Dec '14

From: Jagannadha Sutradharudu Teki <jagannadha.sutradharudu-teki(a)xilinx.com> Add support for Numonyx N25Q32 SPI flash. Signed-off-by: Jagannadha Sutradharudu Teki <jaganna(a)xilinx.com> Signed-off-by: Michal Simek <michal.simek(a)xilinx.com> --- drivers/mtd/spi/stmicro.c | 6 ++++++ 1 files changed, 6 insertions(+), 0 deletions(-) diff --git a/drivers/mtd/spi/stmicro.c b/drivers/mtd/spi/stmicro.c index 32df827..09a3d68 100644 --- a/drivers/mtd/spi/stmicro.c +++ b/drivers/mtd/spi/stmicro.c @@ -93,6 +93,12 @@ static const struct stmicro_spi_flash_params stmicro_spi_flash_table[] = { .name = "M25P128", }, { + .id = 0xba16, + .pages_per_sector = 256, + .nr_sectors = 64, + .name = "N25Q32", + }, + { .id = 0xba17, .pages_per_sector = 256, .nr_sectors = 128, -- 1.7.0.4

3 4

[U-Boot] [PATCH] 85xx/b4:Correct USB DR controller liodn entry
by Ramneek Mehresh 14 Nov '14

14 Nov '14

LIODN entry for B4860/B4420 mentions USB controller as "mph" insread of "dr". This results in PAMU not permitting bus transactions for USB DR controller on B4860 resulting in USB function failure. Replacing "fsl-usb2-mph" with "fsl-usb2-dr" allows USB DR controller bus transactions Signed-off-by: Poonam Aggrwal <poonam.aggrwal(a)freescale.com> Signed-off-by: Ramneek Mehresh <ramneek.mehresh(a)freescale.com> Reviewed-by: Sethi Varun-B16395 <Varun.Sethi(a)freescale.com> Reviewed-by: Sun Yusong-R58495 <yorksun(a)freescale.com> --- arch/powerpc/cpu/mpc85xx/b4860_ids.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/cpu/mpc85xx/b4860_ids.c b/arch/powerpc/cpu/mpc85xx/b4860_ids.c index 39b8e3e..1a30f1c 100644 --- a/arch/powerpc/cpu/mpc85xx/b4860_ids.c +++ b/arch/powerpc/cpu/mpc85xx/b4860_ids.c @@ -55,7 +55,7 @@ struct liodn_id_table liodn_tbl[] = { SET_SDHC_LIODN(1, 552), - SET_USB_LIODN(1, "fsl-usb2-mph", 553), + SET_USB_LIODN(1, "fsl-usb2-dr", 553), SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 1, 148), -- 1.8.3.1

2 1

[U-Boot] [PATCH] sbc8548: enable and test CONFIG_SYS_GENERIC_BOARD
by Paul Gortmaker 14 Nov '14

14 Nov '14

Tested on the following baseline (note "dirty" since I enabled ALT_BOOT in the config in order to use the alternate boot bank.) Everything seems to work fine with no additional changes. The banner warning message is now gone. --- U-Boot 2014.10-rc1-00075-ge49f14af1349-dirty (Aug 14 2014 - 10:26:15) CPU: 8548E, Version: 2.1, (0x80390021) Core: e500, Version: 2.2, (0x80210022) Clock Configuration: CPU0:990 MHz, CCB:396 MHz, DDR:198 MHz (396 MT/s data rate), LBC:99 MHz L1: D-cache 32 KiB enabled I-cache 32 KiB enabled I2C: ready DRAM: Detected UDIMM SDRAM: 128 MiB 256 MiB (DDR2, 64-bit, CL=3, ECC off) Flash: 72 MiB L2: 512 KiB enabled *** Warning - bad CRC, using default environment PCI: Host, 64 bit, 66 MHz, sync, arbiter 00:01.0 - 8086:1026 - Network controller PCI1: Bus 00 - 00 PCIe1: Root Complex, x1 gen1, regs @ 0xe000a000 02:00.0 - 1148:9e00 - Network controller PCIe1: Bus 01 - 02 In: serial Out: serial Err: serial Net: eTSEC0 [PRIME], eTSEC1 Hit any key to stop autoboot: 0 => ver U-Boot 2014.10-rc1-00075-ge49f14af1349-dirty (Aug 14 2014 - 10:26:15) powerpc-linux-gcc (GCC) 4.5.2 GNU ld (GNU Binutils) 2.21 => --- Signed-off-by: Paul Gortmaker <paul.gortmaker(a)windriver.com> --- include/configs/sbc8548.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/configs/sbc8548.h b/include/configs/sbc8548.h index f28f350fcc86..aee0d9e27309 100644 --- a/include/configs/sbc8548.h +++ b/include/configs/sbc8548.h @@ -13,6 +13,8 @@ #ifndef __CONFIG_H #define __CONFIG_H +#define CONFIG_SYS_GENERIC_BOARD + /* * Top level Makefile configuration choices */ -- 1.9.2

2 1

[U-Boot] [PATCH] driver/net/fm/memac_phy: set NEG bit for external MDIOs
by shh.xie＠gmail.com 14 Nov '14

14 Nov '14

From: Shaohui Xie <Shaohui.Xie(a)freescale.com> NEG bit default is '1' for external MDIOs as per FMAN-v3 RM, but on some platforms, e.g. T2080QDS, this bit is '0', which leads to MDIO failure on XAUI PHY, so set this bit definitely to align with the RM. Signed-off-by: Shaohui Xie <Shaohui.Xie(a)freescale.com> --- arch/powerpc/include/asm/fsl_memac.h | 1 + drivers/net/fm/memac_phy.c | 5 ++++- 2 files changed, 5 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/include/asm/fsl_memac.h b/arch/powerpc/include/asm/fsl_memac.h index 4640e33..190643e 100644 --- a/arch/powerpc/include/asm/fsl_memac.h +++ b/arch/powerpc/include/asm/fsl_memac.h @@ -243,6 +243,7 @@ struct memac_mdio_controller { #define MDIO_STAT_PRE (1 << 5) #define MDIO_STAT_ENC (1 << 6) #define MDIO_STAT_HOLD_15_CLK (7 << 2) +#define MDIO_STAT_NEG (1 << 23) #define MDIO_CTL_DEV_ADDR(x) (x & 0x1f) #define MDIO_CTL_PORT_ADDR(x) ((x & 0x1f) << 5) diff --git a/drivers/net/fm/memac_phy.c b/drivers/net/fm/memac_phy.c index de9c0e9..f5b20d5 100644 --- a/drivers/net/fm/memac_phy.c +++ b/drivers/net/fm/memac_phy.c @@ -137,9 +137,12 @@ int fm_memac_mdio_init(bd_t *bis, struct memac_mdio_info *info) * is zero, so MDIO clock is disabled. * So, for proper functioning of MDIO, MDIO_CLK_DIV bits needs to * be properly initialized. + * NEG bit default should be '1' as per FMAN-v3 RM, but on platform + * like T2080QDS, this bit default is '0', which leads to MDIO failure + * on XAUI PHY, so set this bit definitely. */ setbits_be32(&((struct memac_mdio_controller *)info->regs)->mdio_stat, - MDIO_STAT_CLKDIV(258)); + MDIO_STAT_CLKDIV(258) | MDIO_STAT_NEG); return mdio_register(bus); } -- 1.8.0

3 2