U-Boot

Download

u-boot@lists2.denx.biz

October 2008

175 participants
597 discussions

[U-Boot] Read kernel image with nios2
by ivanchuklist ivanchu 21 Oct '08

21 Oct '08

Hi list, I would like to know how u-boot read and copy the image of uclinux kernel in a nios2 platform. Where can i find information about the execution flow of u-boot, code of commands, etc.? Regards, Ivan.

2 1

[U-Boot] [PATCH 2/2] IOMUX: Add console multiplexing support.
by Gary Jennejohn 21 Oct '08

21 Oct '08

Since this patch touches net/eth.c it is being sent separately. When CONFIG_IO_MUX, CONFIG_NETCONSOLE and CFG_CONSOLE_IS_IN_ENV are all defined together it is possible that nc (netconsole) is defined as an output device. In this case it is necessary to set GD_FLG_DEVINIT after the network devices have been initialized, otherwise u-boot might try to send output to a device before it is ready, which leads to various errors. Signed-off-by: Gary Jennejohn <garyj(a)denx.de> --- net/eth.c | 24 ++++++++++++++++++++++++ 1 files changed, 24 insertions(+), 0 deletions(-) diff --git a/net/eth.c b/net/eth.c index 432dd60..94b6e3a 100644 --- a/net/eth.c +++ b/net/eth.c @@ -26,6 +26,11 @@ #include <net.h> #include <miiphy.h> +#if defined(CONFIG_IO_MUX) && defined(CONFIG_NETCONSOLE) && \ + defined(CFG_CONSOLE_IS_IN_ENV) +DECLARE_GLOBAL_DATA_PTR; +#endif + #if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) /* @@ -256,6 +261,15 @@ int eth_initialize(bd_t *bis) putc ('\n'); } +#if defined(CONFIG_IO_MUX) && defined(CONFIG_NETCONSOLE) && \ + defined(CFG_CONSOLE_IS_IN_ENV) + /* + * Must do this very late because a network device may be set as a + * console at boot time. + */ + gd->flags |= GD_FLG_DEVINIT; /* device initialization completed */ +#endif + return eth_number; } @@ -532,6 +546,16 @@ int eth_initialize(bd_t *bis) #if defined(CONFIG_DRIVER_TI_EMAC) davinci_eth_miiphy_initialize(bis); #endif + +#if defined(CONFIG_IO_MUX) && defined(CONFIG_NETCONSOLE) && \ + defined(CFG_CONSOLE_IS_IN_ENV) + /* + * Must do this very late because a network device may be set as a + * console at boot time. + */ + gd->flags |= GD_FLG_DEVINIT; /* device initialization completed */ +#endif + return 0; } #endif -- 1.5.4.3 --- Gary Jennejohn ********************************************************************* DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office(a)denx.de *********************************************************************

3 15

[U-Boot] [PATCH] TQM8260: environment in flash instead EEPROM, baudrate 115k
by Wolfgang Denk 21 Oct '08

21 Oct '08

From: Wolfgang Denk <wd(a)xpert.denx.de> Several customers have reported problems with the environment in EEPROM, including corrupted content after board reset. Probably the code to prevent I2C Enge Conditions is not working sufficiently. We move the environment to flash now, which allows to have a backup copy plus gives much faster boot times. Also, change the default console initialization to 115200 bps as used on most other boards. Signed-off-by: Wolfgang Denk <wd(a)denx.de> --- board/tqc/tqm8260/flash.c | 13 +++++++++++-- include/configs/TQM8260.h | 30 ++++++++++-------------------- 2 files changed, 21 insertions(+), 22 deletions(-) diff --git a/board/tqc/tqm8260/flash.c b/board/tqc/tqm8260/flash.c index 4a6d538..cabc818 100644 --- a/board/tqc/tqm8260/flash.c +++ b/board/tqc/tqm8260/flash.c @@ -204,7 +204,8 @@ unsigned long flash_init (void) #if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH0_BASE flash_protect (FLAG_PROTECT_SET, CONFIG_SYS_MONITOR_BASE, - CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1, &flash_info[0]); + CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1, + &flash_info[0]); #endif #if defined(CONFIG_ENV_IS_IN_FLASH) && defined(CONFIG_ENV_ADDR) @@ -213,7 +214,15 @@ unsigned long flash_init (void) # endif flash_protect (FLAG_PROTECT_SET, CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]); + CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, + &flash_info[0]); +#endif + +#if defined(CONFIG_ENV_IS_IN_FLASH) && defined(CONFIG_ENV_ADDR_REDUND) + flash_protect (FLAG_PROTECT_SET, + CONFIG_ENV_ADDR_REDUND, + CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SIZE_REDUND - 1, + &flash_info[0]); #endif return (size_b0); diff --git a/include/configs/TQM8260.h b/include/configs/TQM8260.h index 54f4b31..533c7ad 100644 --- a/include/configs/TQM8260.h +++ b/include/configs/TQM8260.h @@ -60,11 +60,7 @@ #define CONFIG_BOOTCOUNT_LIMIT -#if defined(CONFIG_CONS_NONE) || defined(CONFIG_CONS_USE_EXTC) -#define CONFIG_BAUDRATE 230400 -#else -#define CONFIG_BAUDRATE 9600 -#endif +#define CONFIG_BAUDRATE 115200 #define CONFIG_PREBOOT "echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo" @@ -83,10 +79,10 @@ "flash_self=run ramargs addip;" \ "bootm ${kernel_addr} ${ramdisk_addr}\0" \ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ - "rootpath=/opt/eldk/ppc_82xx\0" \ - "bootfile=/tftpboot/TQM8260/uImage\0" \ - "kernel_addr=40040000\0" \ - "ramdisk_addr=40100000\0" \ + "rootpath=/opt/eldk/ppc_6xx\0" \ + "bootfile=tqm8260/uImage\0" \ + "kernel_addr=40080000\0" \ + "ramdisk_addr=40200000\0" \ "" #define CONFIG_BOOTCOMMAND "run flash_self" @@ -304,18 +300,12 @@ #define CONFIG_SYS_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */ #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */ -#if 0 -/* Start port with environment in flash; switch to EEPROM later */ #define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE+0x40000) -#define CONFIG_ENV_SIZE 0x40000 +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x40000) +#define CONFIG_ENV_SIZE 0x08000 #define CONFIG_ENV_SECT_SIZE 0x40000 -#else -/* Final version: environment in EEPROM */ -#define CONFIG_ENV_IS_IN_EEPROM 1 -#define CONFIG_ENV_OFFSET 0 -#define CONFIG_ENV_SIZE 2048 -#endif +#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE /*----------------------------------------------------------------------- * Hardware Information Block @@ -380,7 +370,7 @@ #define CONFIG_SYS_FLASH_BASE CONFIG_SYS_FLASH0_BASE #define CONFIG_SYS_MONITOR_BASE TEXT_BASE #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc()*/ +#define CONFIG_SYS_MALLOC_LEN (512 << 10) /* Reserve 512 kB for malloc()*/ /* * Internal Definitions -- 1.5.4.rc1.23.g3a969

1 1

[U-Boot] [PATCH] 85xx: Fix compile warning in mpc8536ds.c
by Kumar Gala 21 Oct '08

21 Oct '08

mpc8536ds.c: In function 'is_sata_supported': mpc8536ds.c:615: warning: unused variable 'devdisr' Signed-off-by: Kumar Gala <galak(a)kernel.crashing.org> --- board/freescale/mpc8536ds/mpc8536ds.c | 1 - 1 files changed, 0 insertions(+), 1 deletions(-) diff --git a/board/freescale/mpc8536ds/mpc8536ds.c b/board/freescale/mpc8536ds/mpc8536ds.c index ce77bb9..f357826 100644 --- a/board/freescale/mpc8536ds/mpc8536ds.c +++ b/board/freescale/mpc8536ds/mpc8536ds.c @@ -612,7 +612,6 @@ get_board_ddr_clk(ulong dummy) int is_sata_supported(void) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - uint devdisr = gur->devdisr; uint sdrs2_io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_SRDS2_IO_SEL) >> 27; if (sdrs2_io_sel & 0x04) -- 1.5.5.1

2 1

[U-Boot] [PATCH 1/3] strmhz(): Round numbers when printing clock frequencies
by Wolfgang Denk 21 Oct '08

21 Oct '08

Round clock frequencies for printing. Many boards printed off clock frequencies like 399 MHz instead of the exact 400 MHz because numberes were not rounded. This is fixed now. Signed-off-by: Wolfgang Denk <wd(a)denx.de> --- include/common.h | 5 +++-- lib_generic/strmhz.c | 6 ++++-- 2 files changed, 7 insertions(+), 4 deletions(-) diff --git a/include/common.h b/include/common.h index e659044..b8a654a 100644 --- a/include/common.h +++ b/include/common.h @@ -692,8 +692,9 @@ void __attribute__((weak)) show_boot_progress (int val); #define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0])) -#define DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d)) -#define roundup(x, y) ((((x) + ((y) - 1)) / (y)) * (y)) +#define DIV_ROUND(n,d) (((n) + ((d)/2)) / (d)) +#define DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d)) +#define roundup(x, y) ((((x) + ((y) - 1)) / (y)) * (y)) #define ALIGN(x,a) __ALIGN_MASK((x),(typeof(x))(a)-1) #define __ALIGN_MASK(x,mask) (((x)+(mask))&~(mask)) diff --git a/lib_generic/strmhz.c b/lib_generic/strmhz.c index d0b6bc6..342cf2b 100644 --- a/lib_generic/strmhz.c +++ b/lib_generic/strmhz.c @@ -27,9 +27,11 @@ char *strmhz (char *buf, long hz) long l, n; long m; - n = hz / 1000000L; + n = DIV_ROUND(hz, 1000000L); l = sprintf (buf, "%ld", n); - m = (hz % 1000000L) / 1000L; + + hz -= n * 1000000L; + m = DIV_ROUND(hz, 1000L); if (m != 0) sprintf (buf + l, ".%03ld", m); return (buf); -- 1.5.5.1

1 5

[U-Boot] FDT include file problems
by Wolfgang Denk 21 Oct '08

21 Oct '08

Hello, on some systems (for example Fedora Core 4) U-Boot builds with the following wanrings only: ... In file included from /home/wd/git/u-boot/include/libfdt_env.h:33, from fdt.c:51: /usr/include/asm/byteorder.h:6:2: warning: #warning using private kernel header; include <endian.h> instead! In file included from /home/wd/git/u-boot/include/libfdt_env.h:33, from fdt_ro.c:51: /usr/include/asm/byteorder.h:6:2: warning: #warning using private kernel header; include <endian.h> instead! In file included from /home/wd/git/u-boot/include/libfdt_env.h:33, from fdt_rw.c:51: /usr/include/asm/byteorder.h:6:2: warning: #warning using private kernel header; include <endian.h> instead! In file included from /home/wd/git/u-boot/include/libfdt_env.h:33, from fdt_strerror.c:51: /usr/include/asm/byteorder.h:6:2: warning: #warning using private kernel header; include <endian.h> instead! In file included from /home/wd/git/u-boot/include/libfdt_env.h:33, from fdt_wip.c:51: /usr/include/asm/byteorder.h:6:2: warning: #warning using private kernel header; include <endian.h> instead! ... The suggested change works in image.h, for example like this: ======================================================================= diff --git a/include/image.h b/include/image.h index 82e6345..1598b61 100644 --- a/include/image.h +++ b/include/image.h @@ -33,27 +33,29 @@ #ifndef __IMAGE_H__ #define __IMAGE_H__ -#include <asm/byteorder.h> -#include <command.h> - -#ifndef USE_HOSTCC -#include <lmb.h> -#include <linux/string.h> -#include <asm/u-boot.h> - -#else +#if USE_HOSTCC +#include <endian.h> /* new uImage format support enabled on host */ #define CONFIG_FIT 1 #define CONFIG_OF_LIBFDT 1 #define CONFIG_FIT_VERBOSE 1 /* enable fit_format_{error,warning}() */ +#else + +#include <lmb.h> +#include <linux/string.h> +#include <asm/u-boot.h> +#include <asm/byteorder.h> + #endif /* USE_HOSTCC */ #if defined(CONFIG_FIT) && !defined(CONFIG_OF_LIBFDT) #error "CONFIG_OF_LIBFDT not enabled, required by CONFIG_FIT!" #endif +#include <command.h> + #if defined(CONFIG_FIT) #include <fdt.h> #include <libfdt.h> ======================================================================= However, for the FDT code this doesn't help, as we then will get unresolved references for fdt32_to_cpu(), cpu_to_fdt32(), fdt64_to_cpu() and cpu_to_fdt64(). The 32 bit accesses couldbe worked around by using htonl() resp. ntohl(), but I don't know a good way for the 64 bit cases. Is there a clean and portable way to do this? Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd(a)denx.de There you go man, Keep as cool as you can. It riles them to believe that you perceive the web they weave. Keep on being free!

2 7

[U-Boot] [PATCH] [UBI] Basic Unsorted Block Image (UBI) support (part 2)
by Kyungmin Park 21 Oct '08

21 Oct '08

Now it can use UBI support on U-Boot Signed-off-by: Kyungmin Park <kyungmin.park(a)samsung.com> --- diff --git a/drivers/mtd/ubi/scan.h b/drivers/mtd/ubi/scan.h new file mode 100644 index 0000000..46d444a --- /dev/null +++ b/drivers/mtd/ubi/scan.h @@ -0,0 +1,165 @@ +/* + * Copyright (c) International Business Machines Corp., 2006 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Author: Artem Bityutskiy (Битюцкий Артём) + */ + +#ifndef __UBI_SCAN_H__ +#define __UBI_SCAN_H__ + +/* The erase counter value for this physical eraseblock is unknown */ +#define UBI_SCAN_UNKNOWN_EC (-1) + +/** + * struct ubi_scan_leb - scanning information about a physical eraseblock. + * @ec: erase counter (%UBI_SCAN_UNKNOWN_EC if it is unknown) + * @pnum: physical eraseblock number + * @lnum: logical eraseblock number + * @scrub: if this physical eraseblock needs scrubbing + * @sqnum: sequence number + * @u: unions RB-tree or @list links + * @u.rb: link in the per-volume RB-tree of &struct ubi_scan_leb objects + * @u.list: link in one of the eraseblock lists + * @leb_ver: logical eraseblock version (obsolete) + * + * One object of this type is allocated for each physical eraseblock during + * scanning. + */ +struct ubi_scan_leb { + int ec; + int pnum; + int lnum; + int scrub; + unsigned long long sqnum; + union { + struct rb_node rb; + struct list_head list; + } u; + uint32_t leb_ver; +}; + +/** + * struct ubi_scan_volume - scanning information about a volume. + * @vol_id: volume ID + * @highest_lnum: highest logical eraseblock number in this volume + * @leb_count: number of logical eraseblocks in this volume + * @vol_type: volume type + * @used_ebs: number of used logical eraseblocks in this volume (only for + * static volumes) + * @last_data_size: amount of data in the last logical eraseblock of this + * volume (always equivalent to the usable logical eraseblock size in case of + * dynamic volumes) + * @data_pad: how many bytes at the end of logical eraseblocks of this volume + * are not used (due to volume alignment) + * @compat: compatibility flags of this volume + * @rb: link in the volume RB-tree + * @root: root of the RB-tree containing all the eraseblock belonging to this + * volume (&struct ubi_scan_leb objects) + * + * One object of this type is allocated for each volume during scanning. + */ +struct ubi_scan_volume { + int vol_id; + int highest_lnum; + int leb_count; + int vol_type; + int used_ebs; + int last_data_size; + int data_pad; + int compat; + struct rb_node rb; + struct rb_root root; +}; + +/** + * struct ubi_scan_info - UBI scanning information. + * @volumes: root of the volume RB-tree + * @corr: list of corrupted physical eraseblocks + * @free: list of free physical eraseblocks + * @erase: list of physical eraseblocks which have to be erased + * @alien: list of physical eraseblocks which should not be used by UBI (e.g., + * @bad_peb_count: count of bad physical eraseblocks + * those belonging to "preserve"-compatible internal volumes) + * @vols_found: number of volumes found during scanning + * @highest_vol_id: highest volume ID + * @alien_peb_count: count of physical eraseblocks in the @alien list + * @is_empty: flag indicating whether the MTD device is empty or not + * @min_ec: lowest erase counter value + * @max_ec: highest erase counter value + * @max_sqnum: highest sequence number value + * @mean_ec: mean erase counter value + * @ec_sum: a temporary variable used when calculating @mean_ec + * @ec_count: a temporary variable used when calculating @mean_ec + * + * This data structure contains the result of scanning and may be used by other + * UBI units to build final UBI data structures, further error-recovery and so + * on. + */ +struct ubi_scan_info { + struct rb_root volumes; + struct list_head corr; + struct list_head free; + struct list_head erase; + struct list_head alien; + int bad_peb_count; + int vols_found; + int highest_vol_id; + int alien_peb_count; + int is_empty; + int min_ec; + int max_ec; + unsigned long long max_sqnum; + int mean_ec; + int ec_sum; + int ec_count; +}; + +struct ubi_device; +struct ubi_vid_hdr; + +/* + * ubi_scan_move_to_list - move a physical eraseblock from the volume tree to a + * list. + * + * @sv: volume scanning information + * @seb: scanning eraseblock infprmation + * @list: the list to move to + */ +static inline void ubi_scan_move_to_list(struct ubi_scan_volume *sv, + struct ubi_scan_leb *seb, + struct list_head *list) +{ + rb_erase(&seb->u.rb, &sv->root); + list_add_tail(&seb->u.list, list); +} + +int ubi_scan_add_used(struct ubi_device *ubi, struct ubi_scan_info *si, + int pnum, int ec, const struct ubi_vid_hdr *vid_hdr, + int bitflips); +struct ubi_scan_volume *ubi_scan_find_sv(const struct ubi_scan_info *si, + int vol_id); +struct ubi_scan_leb *ubi_scan_find_seb(const struct ubi_scan_volume *sv, + int lnum); +void ubi_scan_rm_volume(struct ubi_scan_info *si, struct ubi_scan_volume *sv); +struct ubi_scan_leb *ubi_scan_get_free_peb(struct ubi_device *ubi, + struct ubi_scan_info *si); +int ubi_scan_erase_peb(struct ubi_device *ubi, const struct ubi_scan_info *si, + int pnum, int ec); +struct ubi_scan_info *ubi_scan(struct ubi_device *ubi); +void ubi_scan_destroy_si(struct ubi_scan_info *si); + +#endif /* !__UBI_SCAN_H__ */ diff --git a/drivers/mtd/ubi/ubi-media.h b/drivers/mtd/ubi/ubi-media.h new file mode 100644 index 0000000..c3185d9 --- /dev/null +++ b/drivers/mtd/ubi/ubi-media.h @@ -0,0 +1,372 @@ +/* + * Copyright (c) International Business Machines Corp., 2006 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Authors: Artem Bityutskiy (Битюцкий Артём) + * Thomas Gleixner + * Frank Haverkamp + * Oliver Lohmann + * Andreas Arnez + */ + +/* + * This file defines the layout of UBI headers and all the other UBI on-flash + * data structures. + */ + +#ifndef __UBI_MEDIA_H__ +#define __UBI_MEDIA_H__ + +#include <asm/byteorder.h> + +/* The version of UBI images supported by this implementation */ +#define UBI_VERSION 1 + +/* The highest erase counter value supported by this implementation */ +#define UBI_MAX_ERASECOUNTER 0x7FFFFFFF + +/* The initial CRC32 value used when calculating CRC checksums */ +#define UBI_CRC32_INIT 0xFFFFFFFFU + +/* Erase counter header magic number (ASCII "UBI#") */ +#define UBI_EC_HDR_MAGIC 0x55424923 +/* Volume identifier header magic number (ASCII "UBI!") */ +#define UBI_VID_HDR_MAGIC 0x55424921 + +/* + * Volume type constants used in the volume identifier header. + * + * @UBI_VID_DYNAMIC: dynamic volume + * @UBI_VID_STATIC: static volume + */ +enum { + UBI_VID_DYNAMIC = 1, + UBI_VID_STATIC = 2 +}; + +/* + * Volume flags used in the volume table record. + * + * @UBI_VTBL_AUTORESIZE_FLG: auto-resize this volume + * + * %UBI_VTBL_AUTORESIZE_FLG flag can be set only for one volume in the volume + * table. UBI automatically re-sizes the volume which has this flag and makes + * the volume to be of largest possible size. This means that if after the + * initialization UBI finds out that there are available physical eraseblocks + * present on the device, it automatically appends all of them to the volume + * (the physical eraseblocks reserved for bad eraseblocks handling and other + * reserved physical eraseblocks are not taken). So, if there is a volume with + * the %UBI_VTBL_AUTORESIZE_FLG flag set, the amount of available logical + * eraseblocks will be zero after UBI is loaded, because all of them will be + * reserved for this volume. Note, the %UBI_VTBL_AUTORESIZE_FLG bit is cleared + * after the volume had been initialized. + * + * The auto-resize feature is useful for device production purposes. For + * example, different NAND flash chips may have different amount of initial bad + * eraseblocks, depending of particular chip instance. Manufacturers of NAND + * chips usually guarantee that the amount of initial bad eraseblocks does not + * exceed certain percent, e.g. 2%. When one creates an UBI image which will be + * flashed to the end devices in production, he does not know the exact amount + * of good physical eraseblocks the NAND chip on the device will have, but this + * number is required to calculate the volume sized and put them to the volume + * table of the UBI image. In this case, one of the volumes (e.g., the one + * which will store the root file system) is marked as "auto-resizable", and + * UBI will adjust its size on the first boot if needed. + * + * Note, first UBI reserves some amount of physical eraseblocks for bad + * eraseblock handling, and then re-sizes the volume, not vice-versa. This + * means that the pool of reserved physical eraseblocks will always be present. + */ +enum { + UBI_VTBL_AUTORESIZE_FLG = 0x01, +}; + +/* + * Compatibility constants used by internal volumes. + * + * @UBI_COMPAT_DELETE: delete this internal volume before anything is written + * to the flash + * @UBI_COMPAT_RO: attach this device in read-only mode + * @UBI_COMPAT_PRESERVE: preserve this internal volume - do not touch its + * physical eraseblocks, don't allow the wear-leveling unit to move them + * @UBI_COMPAT_REJECT: reject this UBI image + */ +enum { + UBI_COMPAT_DELETE = 1, + UBI_COMPAT_RO = 2, + UBI_COMPAT_PRESERVE = 4, + UBI_COMPAT_REJECT = 5 +}; + +/* Sizes of UBI headers */ +#define UBI_EC_HDR_SIZE sizeof(struct ubi_ec_hdr) +#define UBI_VID_HDR_SIZE sizeof(struct ubi_vid_hdr) + +/* Sizes of UBI headers without the ending CRC */ +#define UBI_EC_HDR_SIZE_CRC (UBI_EC_HDR_SIZE - sizeof(__be32)) +#define UBI_VID_HDR_SIZE_CRC (UBI_VID_HDR_SIZE - sizeof(__be32)) + +/** + * struct ubi_ec_hdr - UBI erase counter header. + * @magic: erase counter header magic number (%UBI_EC_HDR_MAGIC) + * @version: version of UBI implementation which is supposed to accept this + * UBI image + * @padding1: reserved for future, zeroes + * @ec: the erase counter + * @vid_hdr_offset: where the VID header starts + * @data_offset: where the user data start + * @padding2: reserved for future, zeroes + * @hdr_crc: erase counter header CRC checksum + * + * The erase counter header takes 64 bytes and has a plenty of unused space for + * future usage. The unused fields are zeroed. The @version field is used to + * indicate the version of UBI implementation which is supposed to be able to + * work with this UBI image. If @version is greater then the current UBI + * version, the image is rejected. This may be useful in future if something + * is changed radically. This field is duplicated in the volume identifier + * header. + * + * The @vid_hdr_offset and @data_offset fields contain the offset of the the + * volume identifier header and user data, relative to the beginning of the + * physical eraseblock. These values have to be the same for all physical + * eraseblocks. + */ +struct ubi_ec_hdr { + __be32 magic; + __u8 version; + __u8 padding1[3]; + __be64 ec; /* Warning: the current limit is 31-bit anyway! */ + __be32 vid_hdr_offset; + __be32 data_offset; + __u8 padding2[36]; + __be32 hdr_crc; +} __attribute__ ((packed)); + +/** + * struct ubi_vid_hdr - on-flash UBI volume identifier header. + * @magic: volume identifier header magic number (%UBI_VID_HDR_MAGIC) + * @version: UBI implementation version which is supposed to accept this UBI + * image (%UBI_VERSION) + * @vol_type: volume type (%UBI_VID_DYNAMIC or %UBI_VID_STATIC) + * @copy_flag: if this logical eraseblock was copied from another physical + * eraseblock (for wear-leveling reasons) + * @compat: compatibility of this volume (%0, %UBI_COMPAT_DELETE, + * %UBI_COMPAT_IGNORE, %UBI_COMPAT_PRESERVE, or %UBI_COMPAT_REJECT) + * @vol_id: ID of this volume + * @lnum: logical eraseblock number + * @leb_ver: version of this logical eraseblock (IMPORTANT: obsolete, to be + * removed, kept only for not breaking older UBI users) + * @data_size: how many bytes of data this logical eraseblock contains + * @used_ebs: total number of used logical eraseblocks in this volume + * @data_pad: how many bytes at the end of this physical eraseblock are not + * used + * @data_crc: CRC checksum of the data stored in this logical eraseblock + * @padding1: reserved for future, zeroes + * @sqnum: sequence number + * @padding2: reserved for future, zeroes + * @hdr_crc: volume identifier header CRC checksum + * + * The @sqnum is the value of the global sequence counter at the time when this + * VID header was created. The global sequence counter is incremented each time + * UBI writes a new VID header to the flash, i.e. when it maps a logical + * eraseblock to a new physical eraseblock. The global sequence counter is an + * unsigned 64-bit integer and we assume it never overflows. The @sqnum + * (sequence number) is used to distinguish between older and newer versions of + * logical eraseblocks. + * + * There are 2 situations when there may be more then one physical eraseblock + * corresponding to the same logical eraseblock, i.e., having the same @vol_id + * and @lnum values in the volume identifier header. Suppose we have a logical + * eraseblock L and it is mapped to the physical eraseblock P. + * + * 1. Because UBI may erase physical eraseblocks asynchronously, the following + * situation is possible: L is asynchronously erased, so P is scheduled for + * erasure, then L is written to,i.e. mapped to another physical eraseblock P1, + * so P1 is written to, then an unclean reboot happens. Result - there are 2 + * physical eraseblocks P and P1 corresponding to the same logical eraseblock + * L. But P1 has greater sequence number, so UBI picks P1 when it attaches the + * flash. + * + * 2. From time to time UBI moves logical eraseblocks to other physical + * eraseblocks for wear-leveling reasons. If, for example, UBI moves L from P + * to P1, and an unclean reboot happens before P is physically erased, there + * are two physical eraseblocks P and P1 corresponding to L and UBI has to + * select one of them when the flash is attached. The @sqnum field says which + * PEB is the original (obviously P will have lower @sqnum) and the copy. But + * it is not enough to select the physical eraseblock with the higher sequence + * number, because the unclean reboot could have happen in the middle of the + * copying process, so the data in P is corrupted. It is also not enough to + * just select the physical eraseblock with lower sequence number, because the + * data there may be old (consider a case if more data was added to P1 after + * the copying). Moreover, the unclean reboot may happen when the erasure of P + * was just started, so it result in unstable P, which is "mostly" OK, but + * still has unstable bits. + * + * UBI uses the @copy_flag field to indicate that this logical eraseblock is a + * copy. UBI also calculates data CRC when the data is moved and stores it at + * the @data_crc field of the copy (P1). So when UBI needs to pick one physical + * eraseblock of two (P or P1), the @copy_flag of the newer one (P1) is + * examined. If it is cleared, the situation* is simple and the newer one is + * picked. If it is set, the data CRC of the copy (P1) is examined. If the CRC + * checksum is correct, this physical eraseblock is selected (P1). Otherwise + * the older one (P) is selected. + * + * Note, there is an obsolete @leb_ver field which was used instead of @sqnum + * in the past. But it is not used anymore and we keep it in order to be able + * to deal with old UBI images. It will be removed at some point. + * + * There are 2 sorts of volumes in UBI: user volumes and internal volumes. + * Internal volumes are not seen from outside and are used for various internal + * UBI purposes. In this implementation there is only one internal volume - the + * layout volume. Internal volumes are the main mechanism of UBI extensions. + * For example, in future one may introduce a journal internal volume. Internal + * volumes have their own reserved range of IDs. + * + * The @compat field is only used for internal volumes and contains the "degree + * of their compatibility". It is always zero for user volumes. This field + * provides a mechanism to introduce UBI extensions and to be still compatible + * with older UBI binaries. For example, if someone introduced a journal in + * future, he would probably use %UBI_COMPAT_DELETE compatibility for the + * journal volume. And in this case, older UBI binaries, which know nothing + * about the journal volume, would just delete this volume and work perfectly + * fine. This is similar to what Ext2fs does when it is fed by an Ext3fs image + * - it just ignores the Ext3fs journal. + * + * The @data_crc field contains the CRC checksum of the contents of the logical + * eraseblock if this is a static volume. In case of dynamic volumes, it does + * not contain the CRC checksum as a rule. The only exception is when the + * data of the physical eraseblock was moved by the wear-leveling unit, then + * the wear-leveling unit calculates the data CRC and stores it in the + * @data_crc field. And of course, the @copy_flag is %in this case. + * + * The @data_size field is used only for static volumes because UBI has to know + * how many bytes of data are stored in this eraseblock. For dynamic volumes, + * this field usually contains zero. The only exception is when the data of the + * physical eraseblock was moved to another physical eraseblock for + * wear-leveling reasons. In this case, UBI calculates CRC checksum of the + * contents and uses both @data_crc and @data_size fields. In this case, the + * @data_size field contains data size. + * + * The @used_ebs field is used only for static volumes and indicates how many + * eraseblocks the data of the volume takes. For dynamic volumes this field is + * not used and always contains zero. + * + * The @data_pad is calculated when volumes are created using the alignment + * parameter. So, effectively, the @data_pad field reduces the size of logical + * eraseblocks of this volume. This is very handy when one uses block-oriented + * software (say, cramfs) on top of the UBI volume. + */ +struct ubi_vid_hdr { + __be32 magic; + __u8 version; + __u8 vol_type; + __u8 copy_flag; + __u8 compat; + __be32 vol_id; + __be32 lnum; + __be32 leb_ver; /* obsolete, to be removed, don't use */ + __be32 data_size; + __be32 used_ebs; + __be32 data_pad; + __be32 data_crc; + __u8 padding1[4]; + __be64 sqnum; + __u8 padding2[12]; + __be32 hdr_crc; +} __attribute__ ((packed)); + +/* Internal UBI volumes count */ +#define UBI_INT_VOL_COUNT 1 + +/* + * Starting ID of internal volumes. There is reserved room for 4096 internal + * volumes. + */ +#define UBI_INTERNAL_VOL_START (0x7FFFFFFF - 4096) + +/* The layout volume contains the volume table */ + +#define UBI_LAYOUT_VOLUME_ID UBI_INTERNAL_VOL_START +#define UBI_LAYOUT_VOLUME_TYPE UBI_VID_DYNAMIC +#define UBI_LAYOUT_VOLUME_ALIGN 1 +#define UBI_LAYOUT_VOLUME_EBS 2 +#define UBI_LAYOUT_VOLUME_NAME "layout volume" +#define UBI_LAYOUT_VOLUME_COMPAT UBI_COMPAT_REJECT + +/* The maximum number of volumes per one UBI device */ +#define UBI_MAX_VOLUMES 128 + +/* The maximum volume name length */ +#define UBI_VOL_NAME_MAX 127 + +/* Size of the volume table record */ +#define UBI_VTBL_RECORD_SIZE sizeof(struct ubi_vtbl_record) + +/* Size of the volume table record without the ending CRC */ +#define UBI_VTBL_RECORD_SIZE_CRC (UBI_VTBL_RECORD_SIZE - sizeof(__be32)) + +/** + * struct ubi_vtbl_record - a record in the volume table. + * @reserved_pebs: how many physical eraseblocks are reserved for this volume + * @alignment: volume alignment + * @data_pad: how many bytes are unused at the end of the each physical + * eraseblock to satisfy the requested alignment + * @vol_type: volume type (%UBI_DYNAMIC_VOLUME or %UBI_STATIC_VOLUME) + * @upd_marker: if volume update was started but not finished + * @name_len: volume name length + * @name: the volume name + * @flags: volume flags (%UBI_VTBL_AUTORESIZE_FLG) + * @padding: reserved, zeroes + * @crc: a CRC32 checksum of the record + * + * The volume table records are stored in the volume table, which is stored in + * the layout volume. The layout volume consists of 2 logical eraseblock, each + * of which contains a copy of the volume table (i.e., the volume table is + * duplicated). The volume table is an array of &struct ubi_vtbl_record + * objects indexed by the volume ID. + * + * If the size of the logical eraseblock is large enough to fit + * %UBI_MAX_VOLUMES records, the volume table contains %UBI_MAX_VOLUMES + * records. Otherwise, it contains as many records as it can fit (i.e., size of + * logical eraseblock divided by sizeof(struct ubi_vtbl_record)). + * + * The @upd_marker flag is used to implement volume update. It is set to %1 + * before update and set to %0 after the update. So if the update operation was + * interrupted, UBI knows that the volume is corrupted. + * + * The @alignment field is specified when the volume is created and cannot be + * later changed. It may be useful, for example, when a block-oriented file + * system works on top of UBI. The @data_pad field is calculated using the + * logical eraseblock size and @alignment. The alignment must be multiple to the + * minimal flash I/O unit. If @alignment is 1, all the available space of + * the physical eraseblocks is used. + * + * Empty records contain all zeroes and the CRC checksum of those zeroes. + */ +struct ubi_vtbl_record { + __be32 reserved_pebs; + __be32 alignment; + __be32 data_pad; + __u8 vol_type; + __u8 upd_marker; + __be16 name_len; + __u8 name[UBI_VOL_NAME_MAX+1]; + __u8 flags; + __u8 padding[23]; + __be32 crc; +} __attribute__ ((packed)); + +#endif /* !__UBI_MEDIA_H__ */ diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h new file mode 100644 index 0000000..e736d25 --- /dev/null +++ b/drivers/mtd/ubi/ubi.h @@ -0,0 +1,641 @@ +/* + * Copyright (c) International Business Machines Corp., 2006 + * Copyright (c) Nokia Corporation, 2006, 2007 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Author: Artem Bityutskiy (Битюцкий Артём) + */ + +#ifndef __UBI_UBI_H__ +#define __UBI_UBI_H__ + +#if 0 +#include <linux/init.h> +#include <linux/types.h> +#include <linux/list.h> +#include <linux/rbtree.h> +#include <linux/sched.h> +#include <linux/wait.h> +#include <linux/mutex.h> +#include <linux/rwsem.h> +#include <linux/spinlock.h> +#include <linux/fs.h> +#include <linux/cdev.h> +#include <linux/device.h> +#include <linux/string.h> +#include <linux/vmalloc.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/ubi.h> +#endif + +#include <linux/types.h> +#include <linux/list.h> +#include <linux/rbtree.h> +#include <linux/string.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/ubi.h> + +#include "ubi-media.h" +#include "scan.h" +#include "debug.h" + +/* Maximum number of supported UBI devices */ +#define UBI_MAX_DEVICES 32 + +/* UBI name used for character devices, sysfs, etc */ +#define UBI_NAME_STR "ubi" + +/* Normal UBI messages */ +#define ubi_msg(fmt, ...) printk(KERN_NOTICE "UBI: " fmt "\n", ##__VA_ARGS__) +/* UBI warning messages */ +#define ubi_warn(fmt, ...) printk(KERN_WARNING "UBI warning: %s: " fmt "\n", \ + __func__, ##__VA_ARGS__) +/* UBI error messages */ +#define ubi_err(fmt, ...) printk(KERN_ERR "UBI error: %s: " fmt "\n", \ + __func__, ##__VA_ARGS__) + +/* Lowest number PEBs reserved for bad PEB handling */ +#define MIN_RESEVED_PEBS 2 + +/* Background thread name pattern */ +#define UBI_BGT_NAME_PATTERN "ubi_bgt%dd" + +/* This marker in the EBA table means that the LEB is um-mapped */ +#define UBI_LEB_UNMAPPED -1 + +/* + * In case of errors, UBI tries to repeat the operation several times before + * returning error. The below constant defines how many times UBI re-tries. + */ +#define UBI_IO_RETRIES 3 + +/* + * Error codes returned by the I/O unit. + * + * UBI_IO_PEB_EMPTY: the physical eraseblock is empty, i.e. it contains only + * 0xFF bytes + * UBI_IO_PEB_FREE: the physical eraseblock is free, i.e. it contains only a + * valid erase counter header, and the rest are %0xFF bytes + * UBI_IO_BAD_EC_HDR: the erase counter header is corrupted (bad magic or CRC) + * UBI_IO_BAD_VID_HDR: the volume identifier header is corrupted (bad magic or + * CRC) + * UBI_IO_BITFLIPS: bit-flips were detected and corrected + */ +enum { + UBI_IO_PEB_EMPTY = 1, + UBI_IO_PEB_FREE, + UBI_IO_BAD_EC_HDR, + UBI_IO_BAD_VID_HDR, + UBI_IO_BITFLIPS +}; + +/** + * struct ubi_wl_entry - wear-leveling entry. + * @rb: link in the corresponding RB-tree + * @ec: erase counter + * @pnum: physical eraseblock number + * + * This data structure is used in the WL unit. Each physical eraseblock has a + * corresponding &struct wl_entry object which may be kept in different + * RB-trees. See WL unit for details. + */ +struct ubi_wl_entry { + struct rb_node rb; + int ec; + int pnum; +}; + +/** + * struct ubi_ltree_entry - an entry in the lock tree. + * @rb: links RB-tree nodes + * @vol_id: volume ID of the locked logical eraseblock + * @lnum: locked logical eraseblock number + * @users: how many tasks are using this logical eraseblock or wait for it + * @mutex: read/write mutex to implement read/write access serialization to + * the (@vol_id, @lnum) logical eraseblock + * + * This data structure is used in the EBA unit to implement per-LEB locking. + * When a logical eraseblock is being locked - corresponding + * &struct ubi_ltree_entry object is inserted to the lock tree (@ubi->ltree). + * See EBA unit for details. + */ +struct ubi_ltree_entry { + struct rb_node rb; + int vol_id; + int lnum; + int users; + struct rw_semaphore mutex; +}; + +struct ubi_volume_desc; + +/** + * struct ubi_volume - UBI volume description data structure. + * @dev: device object to make use of the the Linux device model + * @cdev: character device object to create character device + * @ubi: reference to the UBI device description object + * @vol_id: volume ID + * @ref_count: volume reference count + * @readers: number of users holding this volume in read-only mode + * @writers: number of users holding this volume in read-write mode + * @exclusive: whether somebody holds this volume in exclusive mode + * + * @reserved_pebs: how many physical eraseblocks are reserved for this volume + * @vol_type: volume type (%UBI_DYNAMIC_VOLUME or %UBI_STATIC_VOLUME) + * @usable_leb_size: logical eraseblock size without padding + * @used_ebs: how many logical eraseblocks in this volume contain data + * @last_eb_bytes: how many bytes are stored in the last logical eraseblock + * @used_bytes: how many bytes of data this volume contains + * @alignment: volume alignment + * @data_pad: how many bytes are not used at the end of physical eraseblocks to + * satisfy the requested alignment + * @name_len: volume name length + * @name: volume name + * + * @upd_ebs: how many eraseblocks are expected to be updated + * @ch_lnum: LEB number which is being changing by the atomic LEB change + * operation + * @ch_dtype: data persistency type which is being changing by the atomic LEB + * change operation + * @upd_bytes: how many bytes are expected to be received for volume update or + * atomic LEB change + * @upd_received: how many bytes were already received for volume update or + * atomic LEB change + * @upd_buf: update buffer which is used to collect update data or data for + * atomic LEB change + * + * @eba_tbl: EBA table of this volume (LEB->PEB mapping) + * @checked: %1 if this static volume was checked + * @corrupted: %1 if the volume is corrupted (static volumes only) + * @upd_marker: %1 if the update marker is set for this volume + * @updating: %1 if the volume is being updated + * @changing_leb: %1 if the atomic LEB change ioctl command is in progress + * + * @gluebi_desc: gluebi UBI volume descriptor + * @gluebi_refcount: reference count of the gluebi MTD device + * @gluebi_mtd: MTD device description object of the gluebi MTD device + * + * The @corrupted field indicates that the volume's contents is corrupted. + * Since UBI protects only static volumes, this field is not relevant to + * dynamic volumes - it is user's responsibility to assure their data + * integrity. + * + * The @upd_marker flag indicates that this volume is either being updated at + * the moment or is damaged because of an unclean reboot. + */ +struct ubi_volume { + struct device dev; + struct cdev cdev; + struct ubi_device *ubi; + int vol_id; + int ref_count; + int readers; + int writers; + int exclusive; + + int reserved_pebs; + int vol_type; + int usable_leb_size; + int used_ebs; + int last_eb_bytes; + long long used_bytes; + int alignment; + int data_pad; + int name_len; + char name[UBI_VOL_NAME_MAX+1]; + + int upd_ebs; + int ch_lnum; + int ch_dtype; + long long upd_bytes; + long long upd_received; + void *upd_buf; + + int *eba_tbl; + unsigned int checked:1; + unsigned int corrupted:1; + unsigned int upd_marker:1; + unsigned int updating:1; + unsigned int changing_leb:1; + +#ifdef CONFIG_MTD_UBI_GLUEBI + /* + * Gluebi-related stuff may be compiled out. + * TODO: this should not be built into UBI but should be a separate + * ubimtd driver which works on top of UBI and emulates MTD devices. + */ + struct ubi_volume_desc *gluebi_desc; + int gluebi_refcount; + struct mtd_info gluebi_mtd; +#endif +}; + +/** + * struct ubi_volume_desc - descriptor of the UBI volume returned when it is + * opened. + * @vol: reference to the corresponding volume description object + * @mode: open mode (%UBI_READONLY, %UBI_READWRITE, or %UBI_EXCLUSIVE) + */ +struct ubi_volume_desc { + struct ubi_volume *vol; + int mode; +}; + +struct ubi_wl_entry; + +/** + * struct ubi_device - UBI device description structure + * @dev: UBI device object to use the the Linux device model + * @cdev: character device object to create character device + * @ubi_num: UBI device number + * @ubi_name: UBI device name + * @vol_count: number of volumes in this UBI device + * @volumes: volumes of this UBI device + * @volumes_lock: protects @volumes, @rsvd_pebs, @avail_pebs, beb_rsvd_pebs, + * @beb_rsvd_level, @bad_peb_count, @good_peb_count, @vol_count, + * @vol->readers, @vol->writers, @vol->exclusive, + * @vol->ref_count, @vol->mapping and @vol->eba_tbl. + * @ref_count: count of references on the UBI device + * + * @rsvd_pebs: count of reserved physical eraseblocks + * @avail_pebs: count of available physical eraseblocks + * @beb_rsvd_pebs: how many physical eraseblocks are reserved for bad PEB + * handling + * @beb_rsvd_level: normal level of PEBs reserved for bad PEB handling + * + * @autoresize_vol_id: ID of the volume which has to be auto-resized at the end + * of UBI ititializetion + * @vtbl_slots: how many slots are available in the volume table + * @vtbl_size: size of the volume table in bytes + * @vtbl: in-RAM volume table copy + * @volumes_mutex: protects on-flash volume table and serializes volume + * changes, like creation, deletion, update, resize + * + * @max_ec: current highest erase counter value + * @mean_ec: current mean erase counter value + * + * @global_sqnum: global sequence number + * @ltree_lock: protects the lock tree and @global_sqnum + * @ltree: the lock tree + * @alc_mutex: serializes "atomic LEB change" operations + * + * @used: RB-tree of used physical eraseblocks + * @free: RB-tree of free physical eraseblocks + * @scrub: RB-tree of physical eraseblocks which need scrubbing + * @prot: protection trees + * @prot.pnum: protection tree indexed by physical eraseblock numbers + * @prot.aec: protection tree indexed by absolute erase counter value + * @wl_lock: protects the @used, @free, @prot, @lookuptbl, @abs_ec, @move_from, + * @move_to, @move_to_put @erase_pending, @wl_scheduled, and @works + * fields + * @move_mutex: serializes eraseblock moves + * @wl_scheduled: non-zero if the wear-leveling was scheduled + * @lookuptbl: a table to quickly find a &struct ubi_wl_entry object for any + * physical eraseblock + * @abs_ec: absolute erase counter + * @move_from: physical eraseblock from where the data is being moved + * @move_to: physical eraseblock where the data is being moved to + * @move_to_put: if the "to" PEB was put + * @works: list of pending works + * @works_count: count of pending works + * @bgt_thread: background thread description object + * @thread_enabled: if the background thread is enabled + * @bgt_name: background thread name + * + * @flash_size: underlying MTD device size (in bytes) + * @peb_count: count of physical eraseblocks on the MTD device + * @peb_size: physical eraseblock size + * @bad_peb_count: count of bad physical eraseblocks + * @good_peb_count: count of good physical eraseblocks + * @min_io_size: minimal input/output unit size of the underlying MTD device + * @hdrs_min_io_size: minimal I/O unit size used for VID and EC headers + * @ro_mode: if the UBI device is in read-only mode + * @leb_size: logical eraseblock size + * @leb_start: starting offset of logical eraseblocks within physical + * eraseblocks + * @ec_hdr_alsize: size of the EC header aligned to @hdrs_min_io_size + * @vid_hdr_alsize: size of the VID header aligned to @hdrs_min_io_size + * @vid_hdr_offset: starting offset of the volume identifier header (might be + * unaligned) + * @vid_hdr_aloffset: starting offset of the VID header aligned to + * @hdrs_min_io_size + * @vid_hdr_shift: contains @vid_hdr_offset - @vid_hdr_aloffset + * @bad_allowed: whether the MTD device admits of bad physical eraseblocks or + * not + * @mtd: MTD device descriptor + * + * @peb_buf1: a buffer of PEB size used for different purposes + * @peb_buf2: another buffer of PEB size used for different purposes + * @buf_mutex: proptects @peb_buf1 and @peb_buf2 + * @dbg_peb_buf: buffer of PEB size used for debugging + * @dbg_buf_mutex: proptects @dbg_peb_buf + */ +struct ubi_device { + struct cdev cdev; + struct device dev; + int ubi_num; + char ubi_name[sizeof(UBI_NAME_STR)+5]; + int vol_count; + struct ubi_volume *volumes[UBI_MAX_VOLUMES+UBI_INT_VOL_COUNT]; + spinlock_t volumes_lock; + int ref_count; + + int rsvd_pebs; + int avail_pebs; + int beb_rsvd_pebs; + int beb_rsvd_level; + + int autoresize_vol_id; + int vtbl_slots; + int vtbl_size; + struct ubi_vtbl_record *vtbl; + struct mutex volumes_mutex; + + int max_ec; + /* TODO: mean_ec is not updated run-time, fix */ + int mean_ec; + + /* EBA unit's stuff */ + unsigned long long global_sqnum; + spinlock_t ltree_lock; + struct rb_root ltree; + struct mutex alc_mutex; + + /* Wear-leveling unit's stuff */ + struct rb_root used; + struct rb_root free; + struct rb_root scrub; + struct { + struct rb_root pnum; + struct rb_root aec; + } prot; + spinlock_t wl_lock; + struct mutex move_mutex; + struct rw_semaphore work_sem; + int wl_scheduled; + struct ubi_wl_entry **lookuptbl; + unsigned long long abs_ec; + struct ubi_wl_entry *move_from; + struct ubi_wl_entry *move_to; + int move_to_put; + struct list_head works; + int works_count; + struct task_struct *bgt_thread; + int thread_enabled; + char bgt_name[sizeof(UBI_BGT_NAME_PATTERN)+2]; + + /* I/O unit's stuff */ + long long flash_size; + int peb_count; + int peb_size; + int bad_peb_count; + int good_peb_count; + int min_io_size; + int hdrs_min_io_size; + int ro_mode; + int leb_size; + int leb_start; + int ec_hdr_alsize; + int vid_hdr_alsize; + int vid_hdr_offset; + int vid_hdr_aloffset; + int vid_hdr_shift; + int bad_allowed; + struct mtd_info *mtd; + + void *peb_buf1; + void *peb_buf2; + struct mutex buf_mutex; + struct mutex ckvol_mutex; +#ifdef CONFIG_MTD_UBI_DEBUG + void *dbg_peb_buf; + struct mutex dbg_buf_mutex; +#endif +}; + +extern struct kmem_cache *ubi_wl_entry_slab; +extern struct file_operations ubi_ctrl_cdev_operations; +extern struct file_operations ubi_cdev_operations; +extern struct file_operations ubi_vol_cdev_operations; +extern struct class *ubi_class; +extern struct mutex ubi_devices_mutex; + +/* vtbl.c */ +int ubi_change_vtbl_record(struct ubi_device *ubi, int idx, + struct ubi_vtbl_record *vtbl_rec); +int ubi_read_volume_table(struct ubi_device *ubi, struct ubi_scan_info *si); + +/* vmt.c */ +int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req); +int ubi_remove_volume(struct ubi_volume_desc *desc); +int ubi_resize_volume(struct ubi_volume_desc *desc, int reserved_pebs); +int ubi_add_volume(struct ubi_device *ubi, struct ubi_volume *vol); +void ubi_free_volume(struct ubi_device *ubi, struct ubi_volume *vol); + +/* upd.c */ +int ubi_start_update(struct ubi_device *ubi, struct ubi_volume *vol, + long long bytes); +int ubi_more_update_data(struct ubi_device *ubi, struct ubi_volume *vol, + const void __user *buf, int count); +int ubi_start_leb_change(struct ubi_device *ubi, struct ubi_volume *vol, + const struct ubi_leb_change_req *req); +int ubi_more_leb_change_data(struct ubi_device *ubi, struct ubi_volume *vol, + const void __user *buf, int count); + +/* misc.c */ +int ubi_calc_data_len(const struct ubi_device *ubi, const void *buf, int length); +int ubi_check_volume(struct ubi_device *ubi, int vol_id); +void ubi_calculate_reserved(struct ubi_device *ubi); + +/* gluebi.c */ +#ifdef CONFIG_MTD_UBI_GLUEBI +int ubi_create_gluebi(struct ubi_device *ubi, struct ubi_volume *vol); +int ubi_destroy_gluebi(struct ubi_volume *vol); +void ubi_gluebi_updated(struct ubi_volume *vol); +#else +#define ubi_create_gluebi(ubi, vol) 0 +#define ubi_destroy_gluebi(vol) 0 +#define ubi_gluebi_updated(vol) +#endif + +/* eba.c */ +int ubi_eba_unmap_leb(struct ubi_device *ubi, struct ubi_volume *vol, + int lnum); +int ubi_eba_read_leb(struct ubi_device *ubi, struct ubi_volume *vol, int lnum, + void *buf, int offset, int len, int check); +int ubi_eba_write_leb(struct ubi_device *ubi, struct ubi_volume *vol, int lnum, + const void *buf, int offset, int len, int dtype); +int ubi_eba_write_leb_st(struct ubi_device *ubi, struct ubi_volume *vol, + int lnum, const void *buf, int len, int dtype, + int used_ebs); +int ubi_eba_atomic_leb_change(struct ubi_device *ubi, struct ubi_volume *vol, + int lnum, const void *buf, int len, int dtype); +int ubi_eba_copy_leb(struct ubi_device *ubi, int from, int to, + struct ubi_vid_hdr *vid_hdr); +int ubi_eba_init_scan(struct ubi_device *ubi, struct ubi_scan_info *si); +void ubi_eba_close(const struct ubi_device *ubi); + +/* wl.c */ +int ubi_wl_get_peb(struct ubi_device *ubi, int dtype); +int ubi_wl_put_peb(struct ubi_device *ubi, int pnum, int torture); +int ubi_wl_flush(struct ubi_device *ubi); +int ubi_wl_scrub_peb(struct ubi_device *ubi, int pnum); +int ubi_wl_init_scan(struct ubi_device *ubi, struct ubi_scan_info *si); +void ubi_wl_close(struct ubi_device *ubi); +int ubi_thread(void *u); + +/* io.c */ +int ubi_io_read(const struct ubi_device *ubi, void *buf, int pnum, int offset, + int len); +int ubi_io_write(struct ubi_device *ubi, const void *buf, int pnum, int offset, + int len); +int ubi_io_sync_erase(struct ubi_device *ubi, int pnum, int torture); +int ubi_io_is_bad(const struct ubi_device *ubi, int pnum); +int ubi_io_mark_bad(const struct ubi_device *ubi, int pnum); +int ubi_io_read_ec_hdr(struct ubi_device *ubi, int pnum, + struct ubi_ec_hdr *ec_hdr, int verbose); +int ubi_io_write_ec_hdr(struct ubi_device *ubi, int pnum, + struct ubi_ec_hdr *ec_hdr); +int ubi_io_read_vid_hdr(struct ubi_device *ubi, int pnum, + struct ubi_vid_hdr *vid_hdr, int verbose); +int ubi_io_write_vid_hdr(struct ubi_device *ubi, int pnum, + struct ubi_vid_hdr *vid_hdr); + +/* build.c */ +int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num, int vid_hdr_offset); +int ubi_detach_mtd_dev(int ubi_num, int anyway); +struct ubi_device *ubi_get_device(int ubi_num); +void ubi_put_device(struct ubi_device *ubi); +struct ubi_device *ubi_get_by_major(int major); +int ubi_major2num(int major); + +/* + * ubi_rb_for_each_entry - walk an RB-tree. + * @rb: a pointer to type 'struct rb_node' to to use as a loop counter + * @pos: a pointer to RB-tree entry type to use as a loop counter + * @root: RB-tree's root + * @member: the name of the 'struct rb_node' within the RB-tree entry + */ +#define ubi_rb_for_each_entry(rb, pos, root, member) \ + for (rb = rb_first(root), \ + pos = (rb ? container_of(rb, typeof(*pos), member) : NULL); \ + rb; \ + rb = rb_next(rb), pos = container_of(rb, typeof(*pos), member)) + +/** + * ubi_zalloc_vid_hdr - allocate a volume identifier header object. + * @ubi: UBI device description object + * @gfp_flags: GFP flags to allocate with + * + * This function returns a pointer to the newly allocated and zero-filled + * volume identifier header object in case of success and %NULL in case of + * failure. + */ +static inline struct ubi_vid_hdr * +ubi_zalloc_vid_hdr(const struct ubi_device *ubi, gfp_t gfp_flags) +{ + void *vid_hdr; + + vid_hdr = kzalloc(ubi->vid_hdr_alsize, gfp_flags); + if (!vid_hdr) + return NULL; + + /* + * VID headers may be stored at un-aligned flash offsets, so we shift + * the pointer. + */ + return vid_hdr + ubi->vid_hdr_shift; +} + +/** + * ubi_free_vid_hdr - free a volume identifier header object. + * @ubi: UBI device description object + * @vid_hdr: the object to free + */ +static inline void ubi_free_vid_hdr(const struct ubi_device *ubi, + struct ubi_vid_hdr *vid_hdr) +{ + void *p = vid_hdr; + + if (!p) + return; + + kfree(p - ubi->vid_hdr_shift); +} + +/* + * This function is equivalent to 'ubi_io_read()', but @offset is relative to + * the beginning of the logical eraseblock, not to the beginning of the + * physical eraseblock. + */ +static inline int ubi_io_read_data(const struct ubi_device *ubi, void *buf, + int pnum, int offset, int len) +{ + ubi_assert(offset >= 0); + return ubi_io_read(ubi, buf, pnum, offset + ubi->leb_start, len); +} + +/* + * This function is equivalent to 'ubi_io_write()', but @offset is relative to + * the beginning of the logical eraseblock, not to the beginning of the + * physical eraseblock. + */ +static inline int ubi_io_write_data(struct ubi_device *ubi, const void *buf, + int pnum, int offset, int len) +{ + ubi_assert(offset >= 0); + return ubi_io_write(ubi, buf, pnum, offset + ubi->leb_start, len); +} + +/** + * ubi_ro_mode - switch to read-only mode. + * @ubi: UBI device description object + */ +static inline void ubi_ro_mode(struct ubi_device *ubi) +{ + if (!ubi->ro_mode) { + ubi->ro_mode = 1; + ubi_warn("switch to read-only mode"); + } +} + +/** + * vol_id2idx - get table index by volume ID. + * @ubi: UBI device description object + * @vol_id: volume ID + */ +static inline int vol_id2idx(const struct ubi_device *ubi, int vol_id) +{ + if (vol_id >= UBI_INTERNAL_VOL_START) + return vol_id - UBI_INTERNAL_VOL_START + ubi->vtbl_slots; + else + return vol_id; +} + +/** + * idx2vol_id - get volume ID by table index. + * @ubi: UBI device description object + * @idx: table index + */ +static inline int idx2vol_id(const struct ubi_device *ubi, int idx) +{ + if (idx >= ubi->vtbl_slots) + return idx - ubi->vtbl_slots + UBI_INTERNAL_VOL_START; + else + return idx; +} + +#endif /* !__UBI_UBI_H__ */ diff --git a/drivers/mtd/ubi/upd.c b/drivers/mtd/ubi/upd.c new file mode 100644 index 0000000..d395237 --- /dev/null +++ b/drivers/mtd/ubi/upd.c @@ -0,0 +1,441 @@ +/* + * Copyright (c) International Business Machines Corp., 2006 + * Copyright (c) Nokia Corporation, 2006 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Author: Artem Bityutskiy (Битюцкий Артём) + * + * Jan 2007: Alexander Schmidt, hacked per-volume update. + */ + +/* + * This file contains implementation of the volume update and atomic LEB change + * functionality. + * + * The update operation is based on the per-volume update marker which is + * stored in the volume table. The update marker is set before the update + * starts, and removed after the update has been finished. So if the update was + * interrupted by an unclean re-boot or due to some other reasons, the update + * marker stays on the flash media and UBI finds it when it attaches the MTD + * device next time. If the update marker is set for a volume, the volume is + * treated as damaged and most I/O operations are prohibited. Only a new update + * operation is allowed. + * + * Note, in general it is possible to implement the update operation as a + * transaction with a roll-back capability. + */ + +#if 0 +#include <linux/err.h> +#include <asm/uaccess.h> +#include <asm/div64.h> +#endif + +#include <ubi_uboot.h> +#include "ubi.h" + +/** + * set_update_marker - set update marker. + * @ubi: UBI device description object + * @vol: volume description object + * + * This function sets the update marker flag for volume @vol. Returns zero + * in case of success and a negative error code in case of failure. + */ +static int set_update_marker(struct ubi_device *ubi, struct ubi_volume *vol) +{ + int err; + struct ubi_vtbl_record vtbl_rec; + + dbg_msg("set update marker for volume %d", vol->vol_id); + + if (vol->upd_marker) { + ubi_assert(ubi->vtbl[vol->vol_id].upd_marker); + dbg_msg("already set"); + return 0; + } + + memcpy(&vtbl_rec, &ubi->vtbl[vol->vol_id], + sizeof(struct ubi_vtbl_record)); + vtbl_rec.upd_marker = 1; + + mutex_lock(&ubi->volumes_mutex); + err = ubi_change_vtbl_record(ubi, vol->vol_id, &vtbl_rec); + mutex_unlock(&ubi->volumes_mutex); + vol->upd_marker = 1; + return err; +} + +/** + * clear_update_marker - clear update marker. + * @ubi: UBI device description object + * @vol: volume description object + * @bytes: new data size in bytes + * + * This function clears the update marker for volume @vol, sets new volume + * data size and clears the "corrupted" flag (static volumes only). Returns + * zero in case of success and a negative error code in case of failure. + */ +static int clear_update_marker(struct ubi_device *ubi, struct ubi_volume *vol, + long long bytes) +{ + int err; + uint64_t tmp; + struct ubi_vtbl_record vtbl_rec; + + dbg_msg("clear update marker for volume %d", vol->vol_id); + + memcpy(&vtbl_rec, &ubi->vtbl[vol->vol_id], + sizeof(struct ubi_vtbl_record)); + ubi_assert(vol->upd_marker && vtbl_rec.upd_marker); + vtbl_rec.upd_marker = 0; + + if (vol->vol_type == UBI_STATIC_VOLUME) { + vol->corrupted = 0; + vol->used_bytes = tmp = bytes; + vol->last_eb_bytes = do_div(tmp, vol->usable_leb_size); + vol->used_ebs = tmp; + if (vol->last_eb_bytes) + vol->used_ebs += 1; + else + vol->last_eb_bytes = vol->usable_leb_size; + } + + mutex_lock(&ubi->volumes_mutex); + err = ubi_change_vtbl_record(ubi, vol->vol_id, &vtbl_rec); + mutex_unlock(&ubi->volumes_mutex); + vol->upd_marker = 0; + return err; +} + +/** + * ubi_start_update - start volume update. + * @ubi: UBI device description object + * @vol: volume description object + * @bytes: update bytes + * + * This function starts volume update operation. If @bytes is zero, the volume + * is just wiped out. Returns zero in case of success and a negative error code + * in case of failure. + */ +int ubi_start_update(struct ubi_device *ubi, struct ubi_volume *vol, + long long bytes) +{ + int i, err; + uint64_t tmp; + + dbg_msg("start update of volume %d, %llu bytes", vol->vol_id, bytes); + ubi_assert(!vol->updating && !vol->changing_leb); + vol->updating = 1; + + err = set_update_marker(ubi, vol); + if (err) + return err; + + /* Before updating - wipe out the volume */ + for (i = 0; i < vol->reserved_pebs; i++) { + err = ubi_eba_unmap_leb(ubi, vol, i); + if (err) + return err; + } + + if (bytes == 0) { + err = clear_update_marker(ubi, vol, 0); + if (err) + return err; + err = ubi_wl_flush(ubi); + if (!err) + vol->updating = 0; + } + + vol->upd_buf = vmalloc(ubi->leb_size); + if (!vol->upd_buf) + return -ENOMEM; + + tmp = bytes; + vol->upd_ebs = !!do_div(tmp, vol->usable_leb_size); + vol->upd_ebs += tmp; + vol->upd_bytes = bytes; + vol->upd_received = 0; + return 0; +} + +/** + * ubi_start_leb_change - start atomic LEB change. + * @ubi: UBI device description object + * @vol: volume description object + * @req: operation request + * + * This function starts atomic LEB change operation. Returns zero in case of + * success and a negative error code in case of failure. + */ +int ubi_start_leb_change(struct ubi_device *ubi, struct ubi_volume *vol, + const struct ubi_leb_change_req *req) +{ + ubi_assert(!vol->updating && !vol->changing_leb); + + dbg_msg("start changing LEB %d:%d, %u bytes", + vol->vol_id, req->lnum, req->bytes); + if (req->bytes == 0) + return ubi_eba_atomic_leb_change(ubi, vol, req->lnum, NULL, 0, + req->dtype); + + vol->upd_bytes = req->bytes; + vol->upd_received = 0; + vol->changing_leb = 1; + vol->ch_lnum = req->lnum; + vol->ch_dtype = req->dtype; + + vol->upd_buf = vmalloc(req->bytes); + if (!vol->upd_buf) + return -ENOMEM; + + return 0; +} + +/** + * write_leb - write update data. + * @ubi: UBI device description object + * @vol: volume description object + * @lnum: logical eraseblock number + * @buf: data to write + * @len: data size + * @used_ebs: how many logical eraseblocks will this volume contain (static + * volumes only) + * + * This function writes update data to corresponding logical eraseblock. In + * case of dynamic volume, this function checks if the data contains 0xFF bytes + * at the end. If yes, the 0xFF bytes are cut and not written. So if the whole + * buffer contains only 0xFF bytes, the LEB is left unmapped. + * + * The reason why we skip the trailing 0xFF bytes in case of dynamic volume is + * that we want to make sure that more data may be appended to the logical + * eraseblock in future. Indeed, writing 0xFF bytes may have side effects and + * this PEB won't be writable anymore. So if one writes the file-system image + * to the UBI volume where 0xFFs mean free space - UBI makes sure this free + * space is writable after the update. + * + * We do not do this for static volumes because they are read-only. But this + * also cannot be done because we have to store per-LEB CRC and the correct + * data length. + * + * This function returns zero in case of success and a negative error code in + * case of failure. + */ +static int write_leb(struct ubi_device *ubi, struct ubi_volume *vol, int lnum, + void *buf, int len, int used_ebs) +{ + int err; + + if (vol->vol_type == UBI_DYNAMIC_VOLUME) { + int l = ALIGN(len, ubi->min_io_size); + + memset(buf + len, 0xFF, l - len); + len = ubi_calc_data_len(ubi, buf, l); + if (len == 0) { + dbg_msg("all %d bytes contain 0xFF - skip", len); + return 0; + } + + err = ubi_eba_write_leb(ubi, vol, lnum, buf, 0, len, UBI_UNKNOWN); + } else { + /* + * When writing static volume, and this is the last logical + * eraseblock, the length (@len) does not have to be aligned to + * the minimal flash I/O unit. The 'ubi_eba_write_leb_st()' + * function accepts exact (unaligned) length and stores it in + * the VID header. And it takes care of proper alignment by + * padding the buffer. Here we just make sure the padding will + * contain zeros, not random trash. + */ + memset(buf + len, 0, vol->usable_leb_size - len); + err = ubi_eba_write_leb_st(ubi, vol, lnum, buf, len, + UBI_UNKNOWN, used_ebs); + } + + return err; +} + +/** + * ubi_more_update_data - write more update data. + * @vol: volume description object + * @buf: write data (user-space memory buffer) + * @count: how much bytes to write + * + * This function writes more data to the volume which is being updated. It may + * be called arbitrary number of times until all the update data arriveis. This + * function returns %0 in case of success, number of bytes written during the + * last call if the whole volume update has been successfully finished, and a + * negative error code in case of failure. + */ +int ubi_more_update_data(struct ubi_device *ubi, struct ubi_volume *vol, + const void __user *buf, int count) +{ + uint64_t tmp; + int lnum, offs, err = 0, len, to_write = count; + + dbg_msg("write %d of %lld bytes, %lld already passed", + count, vol->upd_bytes, vol->upd_received); + + if (ubi->ro_mode) + return -EROFS; + + tmp = vol->upd_received; + offs = do_div(tmp, vol->usable_leb_size); + lnum = tmp; + + if (vol->upd_received + count > vol->upd_bytes) + to_write = count = vol->upd_bytes - vol->upd_received; + + /* + * When updating volumes, we accumulate whole logical eraseblock of + * data and write it at once. + */ + if (offs != 0) { + /* + * This is a write to the middle of the logical eraseblock. We + * copy the data to our update buffer and wait for more data or + * flush it if the whole eraseblock is written or the update + * is finished. + */ + + len = vol->usable_leb_size - offs; + if (len > count) + len = count; + + err = copy_from_user(vol->upd_buf + offs, buf, len); + if (err) + return -EFAULT; + + if (offs + len == vol->usable_leb_size || + vol->upd_received + len == vol->upd_bytes) { + int flush_len = offs + len; + + /* + * OK, we gathered either the whole eraseblock or this + * is the last chunk, it's time to flush the buffer. + */ + ubi_assert(flush_len <= vol->usable_leb_size); + err = write_leb(ubi, vol, lnum, vol->upd_buf, flush_len, + vol->upd_ebs); + if (err) + return err; + } + + vol->upd_received += len; + count -= len; + buf += len; + lnum += 1; + } + + /* + * If we've got more to write, let's continue. At this point we know we + * are starting from the beginning of an eraseblock. + */ + while (count) { + if (count > vol->usable_leb_size) + len = vol->usable_leb_size; + else + len = count; + + err = copy_from_user(vol->upd_buf, buf, len); + if (err) + return -EFAULT; + + if (len == vol->usable_leb_size || + vol->upd_received + len == vol->upd_bytes) { + err = write_leb(ubi, vol, lnum, vol->upd_buf, + len, vol->upd_ebs); + if (err) + break; + } + + vol->upd_received += len; + count -= len; + lnum += 1; + buf += len; + } + + ubi_assert(vol->upd_received <= vol->upd_bytes); + if (vol->upd_received == vol->upd_bytes) { + /* The update is finished, clear the update marker */ + err = clear_update_marker(ubi, vol, vol->upd_bytes); + if (err) + return err; + err = ubi_wl_flush(ubi); + if (err == 0) { + vol->updating = 0; + err = to_write; + vfree(vol->upd_buf); + } + } + + return err; +} + +/** + * ubi_more_leb_change_data - accept more data for atomic LEB change. + * @vol: volume description object + * @buf: write data (user-space memory buffer) + * @count: how much bytes to write + * + * This function accepts more data to the volume which is being under the + * "atomic LEB change" operation. It may be called arbitrary number of times + * until all data arrives. This function returns %0 in case of success, number + * of bytes written during the last call if the whole "atomic LEB change" + * operation has been successfully finished, and a negative error code in case + * of failure. + */ +int ubi_more_leb_change_data(struct ubi_device *ubi, struct ubi_volume *vol, + const void __user *buf, int count) +{ + int err; + + dbg_msg("write %d of %lld bytes, %lld already passed", + count, vol->upd_bytes, vol->upd_received); + + if (ubi->ro_mode) + return -EROFS; + + if (vol->upd_received + count > vol->upd_bytes) + count = vol->upd_bytes - vol->upd_received; + + err = copy_from_user(vol->upd_buf + vol->upd_received, buf, count); + if (err) + return -EFAULT; + + vol->upd_received += count; + + if (vol->upd_received == vol->upd_bytes) { + int len = ALIGN((int)vol->upd_bytes, ubi->min_io_size); + + memset(vol->upd_buf + vol->upd_bytes, 0xFF, len - vol->upd_bytes); + len = ubi_calc_data_len(ubi, vol->upd_buf, len); + err = ubi_eba_atomic_leb_change(ubi, vol, vol->ch_lnum, + vol->upd_buf, len, UBI_UNKNOWN); + if (err) + return err; + } + + ubi_assert(vol->upd_received <= vol->upd_bytes); + if (vol->upd_received == vol->upd_bytes) { + vol->changing_leb = 0; + err = count; + vfree(vol->upd_buf); + } + + return err; +} diff --git a/drivers/mtd/ubi/vmt.c b/drivers/mtd/ubi/vmt.c new file mode 100644 index 0000000..2f406d9 --- /dev/null +++ b/drivers/mtd/ubi/vmt.c @@ -0,0 +1,862 @@ +/* + * Copyright (c) International Business Machines Corp., 2006 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Author: Artem Bityutskiy (Битюцкий Артём) + */ + +/* + * This file contains implementation of volume creation, deletion, updating and + * resizing. + */ + +#if 0 +#include <linux/err.h> +#include <asm/div64.h> +#endif + +#include <ubi_uboot.h> +#include "ubi.h" + +#ifdef CONFIG_MTD_UBI_DEBUG_PARANOID +static void paranoid_check_volumes(struct ubi_device *ubi); +#else +#define paranoid_check_volumes(ubi) +#endif + +#if 0 +static ssize_t vol_attribute_show(struct device *dev, + struct device_attribute *attr, char *buf); + +/* Device attributes corresponding to files in '/<sysfs>/class/ubi/ubiX_Y' */ +static struct device_attribute attr_vol_reserved_ebs = + __ATTR(reserved_ebs, S_IRUGO, vol_attribute_show, NULL); +static struct device_attribute attr_vol_type = + __ATTR(type, S_IRUGO, vol_attribute_show, NULL); +static struct device_attribute attr_vol_name = + __ATTR(name, S_IRUGO, vol_attribute_show, NULL); +static struct device_attribute attr_vol_corrupted = + __ATTR(corrupted, S_IRUGO, vol_attribute_show, NULL); +static struct device_attribute attr_vol_alignment = + __ATTR(alignment, S_IRUGO, vol_attribute_show, NULL); +static struct device_attribute attr_vol_usable_eb_size = + __ATTR(usable_eb_size, S_IRUGO, vol_attribute_show, NULL); +static struct device_attribute attr_vol_data_bytes = + __ATTR(data_bytes, S_IRUGO, vol_attribute_show, NULL); +static struct device_attribute attr_vol_upd_marker = + __ATTR(upd_marker, S_IRUGO, vol_attribute_show, NULL); + +/* + * "Show" method for files in '/<sysfs>/class/ubi/ubiX_Y/'. + * + * Consider a situation: + * A. process 1 opens a sysfs file related to volume Y, say + * /<sysfs>/class/ubi/ubiX_Y/reserved_ebs; + * B. process 2 removes volume Y; + * C. process 1 starts reading the /<sysfs>/class/ubi/ubiX_Y/reserved_ebs file; + * + * In this situation, this function will return %-ENODEV because it will find + * out that the volume was removed from the @ubi->volumes array. + */ +static ssize_t vol_attribute_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int ret; + struct ubi_volume *vol = container_of(dev, struct ubi_volume, dev); + struct ubi_device *ubi; + + ubi = ubi_get_device(vol->ubi->ubi_num); + if (!ubi) + return -ENODEV; + + spin_lock(&ubi->volumes_lock); + if (!ubi->volumes[vol->vol_id]) { + spin_unlock(&ubi->volumes_lock); + ubi_put_device(ubi); + return -ENODEV; + } + /* Take a reference to prevent volume removal */ + vol->ref_count += 1; + spin_unlock(&ubi->volumes_lock); + + if (attr == &attr_vol_reserved_ebs) + ret = sprintf(buf, "%d\n", vol->reserved_pebs); + else if (attr == &attr_vol_type) { + const char *tp; + + if (vol->vol_type == UBI_DYNAMIC_VOLUME) + tp = "dynamic"; + else + tp = "static"; + ret = sprintf(buf, "%s\n", tp); + } else if (attr == &attr_vol_name) + ret = sprintf(buf, "%s\n", vol->name); + else if (attr == &attr_vol_corrupted) + ret = sprintf(buf, "%d\n", vol->corrupted); + else if (attr == &attr_vol_alignment) + ret = sprintf(buf, "%d\n", vol->alignment); + else if (attr == &attr_vol_usable_eb_size) + ret = sprintf(buf, "%d\n", vol->usable_leb_size); + else if (attr == &attr_vol_data_bytes) + ret = sprintf(buf, "%lld\n", vol->used_bytes); + else if (attr == &attr_vol_upd_marker) + ret = sprintf(buf, "%d\n", vol->upd_marker); + else + /* This must be a bug */ + ret = -EINVAL; + + /* We've done the operation, drop volume and UBI device references */ + spin_lock(&ubi->volumes_lock); + vol->ref_count -= 1; + ubi_assert(vol->ref_count >= 0); + spin_unlock(&ubi->volumes_lock); + ubi_put_device(ubi); + return ret; +} +#endif + +/* Release method for volume devices */ +static void vol_release(struct device *dev) +{ + struct ubi_volume *vol = container_of(dev, struct ubi_volume, dev); + + kfree(vol); +} + +#if 0 +/** + * volume_sysfs_init - initialize sysfs for new volume. + * @ubi: UBI device description object + * @vol: volume description object + * + * This function returns zero in case of success and a negative error code in + * case of failure. + * + * Note, this function does not free allocated resources in case of failure - + * the caller does it. This is because this would cause release() here and the + * caller would oops. + */ +static int volume_sysfs_init(struct ubi_device *ubi, struct ubi_volume *vol) +{ + int err; + + err = device_create_file(&vol->dev, &attr_vol_reserved_ebs); + if (err) + return err; + err = device_create_file(&vol->dev, &attr_vol_type); + if (err) + return err; + err = device_create_file(&vol->dev, &attr_vol_name); + if (err) + return err; + err = device_create_file(&vol->dev, &attr_vol_corrupted); + if (err) + return err; + err = device_create_file(&vol->dev, &attr_vol_alignment); + if (err) + return err; + err = device_create_file(&vol->dev, &attr_vol_usable_eb_size); + if (err) + return err; + err = device_create_file(&vol->dev, &attr_vol_data_bytes); + if (err) + return err; + err = device_create_file(&vol->dev, &attr_vol_upd_marker); + return err; +} + +/** + * volume_sysfs_close - close sysfs for a volume. + * @vol: volume description object + */ +static void volume_sysfs_close(struct ubi_volume *vol) +{ + device_remove_file(&vol->dev, &attr_vol_upd_marker); + device_remove_file(&vol->dev, &attr_vol_data_bytes); + device_remove_file(&vol->dev, &attr_vol_usable_eb_size); + device_remove_file(&vol->dev, &attr_vol_alignment); + device_remove_file(&vol->dev, &attr_vol_corrupted); + device_remove_file(&vol->dev, &attr_vol_name); + device_remove_file(&vol->dev, &attr_vol_type); + device_remove_file(&vol->dev, &attr_vol_reserved_ebs); + device_unregister(&vol->dev); +} +#endif + +/** + * ubi_create_volume - create volume. + * @ubi: UBI device description object + * @req: volume creation request + * + * This function creates volume described by @req. If @req->vol_id id + * %UBI_VOL_NUM_AUTO, this function automatically assign ID to the new volume + * and saves it in @req->vol_id. Returns zero in case of success and a negative + * error code in case of failure. Note, the caller has to have the + * @ubi->volumes_mutex locked. + */ +int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req) +{ + int i, err, vol_id = req->vol_id, dont_free = 0; + struct ubi_volume *vol; + struct ubi_vtbl_record vtbl_rec; + uint64_t bytes; + dev_t dev; + + if (ubi->ro_mode) + return -EROFS; + + vol = kzalloc(sizeof(struct ubi_volume), GFP_KERNEL); + if (!vol) + return -ENOMEM; + + spin_lock(&ubi->volumes_lock); + if (vol_id == UBI_VOL_NUM_AUTO) { + /* Find unused volume ID */ + dbg_msg("search for vacant volume ID"); + for (i = 0; i < ubi->vtbl_slots; i++) + if (!ubi->volumes[i]) { + vol_id = i; + break; + } + + if (vol_id == UBI_VOL_NUM_AUTO) { + dbg_err("out of volume IDs"); + err = -ENFILE; + goto out_unlock; + } + req->vol_id = vol_id; + } + + dbg_msg("volume ID %d, %llu bytes, type %d, name %s", + vol_id, (unsigned long long)req->bytes, + (int)req->vol_type, req->name); + + /* Ensure that this volume does not exist */ + err = -EEXIST; + if (ubi->volumes[vol_id]) { + dbg_err("volume %d already exists", vol_id); + goto out_unlock; + } + + /* Ensure that the name is unique */ + for (i = 0; i < ubi->vtbl_slots; i++) + if (ubi->volumes[i] && + ubi->volumes[i]->name_len == req->name_len && + !strcmp(ubi->volumes[i]->name, req->name)) { + dbg_err("volume \"%s\" exists (ID %d)", req->name, i); + goto out_unlock; + } + + /* Calculate how many eraseblocks are requested */ + vol->usable_leb_size = ubi->leb_size - ubi->leb_size % req->alignment; + bytes = req->bytes; + if (do_div(bytes, vol->usable_leb_size)) + vol->reserved_pebs = 1; + vol->reserved_pebs += bytes; + + /* Reserve physical eraseblocks */ + if (vol->reserved_pebs > ubi->avail_pebs) { + dbg_err("not enough PEBs, only %d available", ubi->avail_pebs); + err = -ENOSPC; + goto out_unlock; + } + ubi->avail_pebs -= vol->reserved_pebs; + ubi->rsvd_pebs += vol->reserved_pebs; + spin_unlock(&ubi->volumes_lock); + + vol->vol_id = vol_id; + vol->alignment = req->alignment; + vol->data_pad = ubi->leb_size % vol->alignment; + vol->vol_type = req->vol_type; + vol->name_len = req->name_len; + memcpy(vol->name, req->name, vol->name_len + 1); + vol->ubi = ubi; + + /* + * Finish all pending erases because there may be some LEBs belonging + * to the same volume ID. + */ + err = ubi_wl_flush(ubi); + if (err) + goto out_acc; + + vol->eba_tbl = kmalloc(vol->reserved_pebs * sizeof(int), GFP_KERNEL); + if (!vol->eba_tbl) { + err = -ENOMEM; + goto out_acc; + } + + for (i = 0; i < vol->reserved_pebs; i++) + vol->eba_tbl[i] = UBI_LEB_UNMAPPED; + + if (vol->vol_type == UBI_DYNAMIC_VOLUME) { + vol->used_ebs = vol->reserved_pebs; + vol->last_eb_bytes = vol->usable_leb_size; + vol->used_bytes = + (long long)vol->used_ebs * vol->usable_leb_size; + } else { + bytes = vol->used_bytes; + vol->last_eb_bytes = do_div(bytes, vol->usable_leb_size); + vol->used_ebs = bytes; + if (vol->last_eb_bytes) + vol->used_ebs += 1; + else + vol->last_eb_bytes = vol->usable_leb_size; + } + + /* Register character device for the volume */ + cdev_init(&vol->cdev, &ubi_vol_cdev_operations); + vol->cdev.owner = THIS_MODULE; + dev = MKDEV(MAJOR(ubi->cdev.dev), vol_id + 1); + err = cdev_add(&vol->cdev, dev, 1); + if (err) { + ubi_err("cannot add character device"); + goto out_mapping; + } + + err = ubi_create_gluebi(ubi, vol); + if (err) + goto out_cdev; + + vol->dev.release = vol_release; + vol->dev.parent = &ubi->dev; + vol->dev.devt = dev; + vol->dev.class = ubi_class; + + sprintf(&vol->dev.bus_id[0], "%s_%d", ubi->ubi_name, vol->vol_id); + err = device_register(&vol->dev); + if (err) { + ubi_err("cannot register device"); + goto out_gluebi; + } + + err = volume_sysfs_init(ubi, vol); + if (err) + goto out_sysfs; + + /* Fill volume table record */ + memset(&vtbl_rec, 0, sizeof(struct ubi_vtbl_record)); + vtbl_rec.reserved_pebs = cpu_to_be32(vol->reserved_pebs); + vtbl_rec.alignment = cpu_to_be32(vol->alignment); + vtbl_rec.data_pad = cpu_to_be32(vol->data_pad); + vtbl_rec.name_len = cpu_to_be16(vol->name_len); + if (vol->vol_type == UBI_DYNAMIC_VOLUME) + vtbl_rec.vol_type = UBI_VID_DYNAMIC; + else + vtbl_rec.vol_type = UBI_VID_STATIC; + memcpy(vtbl_rec.name, vol->name, vol->name_len + 1); + + err = ubi_change_vtbl_record(ubi, vol_id, &vtbl_rec); + if (err) + goto out_sysfs; + + spin_lock(&ubi->volumes_lock); + ubi->volumes[vol_id] = vol; + ubi->vol_count += 1; + spin_unlock(&ubi->volumes_lock); + + paranoid_check_volumes(ubi); + return 0; + +out_sysfs: + /* + * We have registered our device, we should not free the volume* + * description object in this function in case of an error - it is + * freed by the release function. + * + * Get device reference to prevent the release function from being + * called just after sysfs has been closed. + */ + dont_free = 1; + get_device(&vol->dev); + volume_sysfs_close(vol); +out_gluebi: + if (ubi_destroy_gluebi(vol)) + dbg_err("cannot destroy gluebi for volume %d:%d", + ubi->ubi_num, vol_id); +out_cdev: + cdev_del(&vol->cdev); +out_mapping: + kfree(vol->eba_tbl); +out_acc: + spin_lock(&ubi->volumes_lock); + ubi->rsvd_pebs -= vol->reserved_pebs; + ubi->avail_pebs += vol->reserved_pebs; +out_unlock: + spin_unlock(&ubi->volumes_lock); + if (dont_free) + put_device(&vol->dev); + else + kfree(vol); + ubi_err("cannot create volume %d, error %d", vol_id, err); + return err; +} + +/** + * ubi_remove_volume - remove volume. + * @desc: volume descriptor + * + * This function removes volume described by @desc. The volume has to be opened + * in "exclusive" mode. Returns zero in case of success and a negative error + * code in case of failure. The caller has to have the @ubi->volumes_mutex + * locked. + */ +int ubi_remove_volume(struct ubi_volume_desc *desc) +{ + struct ubi_volume *vol = desc->vol; + struct ubi_device *ubi = vol->ubi; + int i, err, vol_id = vol->vol_id, reserved_pebs = vol->reserved_pebs; + + dbg_msg("remove UBI volume %d", vol_id); + ubi_assert(desc->mode == UBI_EXCLUSIVE); + ubi_assert(vol == ubi->volumes[vol_id]); + + if (ubi->ro_mode) + return -EROFS; + + spin_lock(&ubi->volumes_lock); + if (vol->ref_count > 1) { + /* + * The volume is busy, probably someone is reading one of its + * sysfs files. + */ + err = -EBUSY; + goto out_unlock; + } + ubi->volumes[vol_id] = NULL; + spin_unlock(&ubi->volumes_lock); + + err = ubi_destroy_gluebi(vol); + if (err) + goto out_err; + + err = ubi_change_vtbl_record(ubi, vol_id, NULL); + if (err) + goto out_err; + + for (i = 0; i < vol->reserved_pebs; i++) { + err = ubi_eba_unmap_leb(ubi, vol, i); + if (err) + goto out_err; + } + + kfree(vol->eba_tbl); + vol->eba_tbl = NULL; + cdev_del(&vol->cdev); + volume_sysfs_close(vol); + + spin_lock(&ubi->volumes_lock); + ubi->rsvd_pebs -= reserved_pebs; + ubi->avail_pebs += reserved_pebs; + i = ubi->beb_rsvd_level - ubi->beb_rsvd_pebs; + if (i > 0) { + i = ubi->avail_pebs >= i ? i : ubi->avail_pebs; + ubi->avail_pebs -= i; + ubi->rsvd_pebs += i; + ubi->beb_rsvd_pebs += i; + if (i > 0) + ubi_msg("reserve more %d PEBs", i); + } + ubi->vol_count -= 1; + spin_unlock(&ubi->volumes_lock); + + paranoid_check_volumes(ubi); + return 0; + +out_err: + ubi_err("cannot remove volume %d, error %d", vol_id, err); + spin_lock(&ubi->volumes_lock); + ubi->volumes[vol_id] = vol; +out_unlock: + spin_unlock(&ubi->volumes_lock); + return err; +} + +/** + * ubi_resize_volume - re-size volume. + * @desc: volume descriptor + * @reserved_pebs: new size in physical eraseblocks + * + * This function re-sizes the volume and returns zero in case of success, and a + * negative error code in case of failure. The caller has to have the + * @ubi->volumes_mutex locked. + */ +int ubi_resize_volume(struct ubi_volume_desc *desc, int reserved_pebs) +{ + int i, err, pebs, *new_mapping; + struct ubi_volume *vol = desc->vol; + struct ubi_device *ubi = vol->ubi; + struct ubi_vtbl_record vtbl_rec; + int vol_id = vol->vol_id; + + if (ubi->ro_mode) + return -EROFS; + + dbg_msg("re-size volume %d to from %d to %d PEBs", + vol_id, vol->reserved_pebs, reserved_pebs); + + if (vol->vol_type == UBI_STATIC_VOLUME && + reserved_pebs < vol->used_ebs) { + dbg_err("too small size %d, %d LEBs contain data", + reserved_pebs, vol->used_ebs); + return -EINVAL; + } + + /* If the size is the same, we have nothing to do */ + if (reserved_pebs == vol->reserved_pebs) + return 0; + + new_mapping = kmalloc(reserved_pebs * sizeof(int), GFP_KERNEL); + if (!new_mapping) + return -ENOMEM; + + for (i = 0; i < reserved_pebs; i++) + new_mapping[i] = UBI_LEB_UNMAPPED; + + spin_lock(&ubi->volumes_lock); + if (vol->ref_count > 1) { + spin_unlock(&ubi->volumes_lock); + err = -EBUSY; + goto out_free; + } + spin_unlock(&ubi->volumes_lock); + + /* Reserve physical eraseblocks */ + pebs = reserved_pebs - vol->reserved_pebs; + if (pebs > 0) { + spin_lock(&ubi->volumes_lock); + if (pebs > ubi->avail_pebs) { + dbg_err("not enough PEBs: requested %d, available %d", + pebs, ubi->avail_pebs); + spin_unlock(&ubi->volumes_lock); + err = -ENOSPC; + goto out_free; + } + ubi->avail_pebs -= pebs; + ubi->rsvd_pebs += pebs; + for (i = 0; i < vol->reserved_pebs; i++) + new_mapping[i] = vol->eba_tbl[i]; + kfree(vol->eba_tbl); + vol->eba_tbl = new_mapping; + spin_unlock(&ubi->volumes_lock); + } + + /* Change volume table record */ + memcpy(&vtbl_rec, &ubi->vtbl[vol_id], sizeof(struct ubi_vtbl_record)); + vtbl_rec.reserved_pebs = cpu_to_be32(reserved_pebs); + err = ubi_change_vtbl_record(ubi, vol_id, &vtbl_rec); + if (err) + goto out_acc; + + if (pebs < 0) { + for (i = 0; i < -pebs; i++) { + err = ubi_eba_unmap_leb(ubi, vol, reserved_pebs + i); + if (err) + goto out_acc; + } + spin_lock(&ubi->volumes_lock); + ubi->rsvd_pebs += pebs; + ubi->avail_pebs -= pebs; + pebs = ubi->beb_rsvd_level - ubi->beb_rsvd_pebs; + if (pebs > 0) { + pebs = ubi->avail_pebs >= pebs ? pebs : ubi->avail_pebs; + ubi->avail_pebs -= pebs; + ubi->rsvd_pebs += pebs; + ubi->beb_rsvd_pebs += pebs; + if (pebs > 0) + ubi_msg("reserve more %d PEBs", pebs); + } + for (i = 0; i < reserved_pebs; i++) + new_mapping[i] = vol->eba_tbl[i]; + kfree(vol->eba_tbl); + vol->eba_tbl = new_mapping; + spin_unlock(&ubi->volumes_lock); + } + + vol->reserved_pebs = reserved_pebs; + if (vol->vol_type == UBI_DYNAMIC_VOLUME) { + vol->used_ebs = reserved_pebs; + vol->last_eb_bytes = vol->usable_leb_size; + vol->used_bytes = + (long long)vol->used_ebs * vol->usable_leb_size; + } + + paranoid_check_volumes(ubi); + return 0; + +out_acc: + if (pebs > 0) { + spin_lock(&ubi->volumes_lock); + ubi->rsvd_pebs -= pebs; + ubi->avail_pebs += pebs; + spin_unlock(&ubi->volumes_lock); + } +out_free: + kfree(new_mapping); + return err; +} + +/** + * ubi_add_volume - add volume. + * @ubi: UBI device description object + * @vol: volume description object + * + * This function adds an existing volume and initializes all its data + * structures. Returns zero in case of success and a negative error code in + * case of failure. + */ +int ubi_add_volume(struct ubi_device *ubi, struct ubi_volume *vol) +{ + int err, vol_id = vol->vol_id; + dev_t dev; + + dbg_msg("add volume %d", vol_id); + ubi_dbg_dump_vol_info(vol); + + /* Register character device for the volume */ + cdev_init(&vol->cdev, &ubi_vol_cdev_operations); + vol->cdev.owner = THIS_MODULE; + dev = MKDEV(MAJOR(ubi->cdev.dev), vol->vol_id + 1); + err = cdev_add(&vol->cdev, dev, 1); + if (err) { + ubi_err("cannot add character device for volume %d, error %d", + vol_id, err); + return err; + } + + err = ubi_create_gluebi(ubi, vol); + if (err) + goto out_cdev; + + vol->dev.release = vol_release; + vol->dev.parent = &ubi->dev; + vol->dev.devt = dev; + vol->dev.class = ubi_class; + sprintf(&vol->dev.bus_id[0], "%s_%d", ubi->ubi_name, vol->vol_id); + err = device_register(&vol->dev); + if (err) + goto out_gluebi; + + err = volume_sysfs_init(ubi, vol); + if (err) { + cdev_del(&vol->cdev); + err = ubi_destroy_gluebi(vol); + volume_sysfs_close(vol); + return err; + } + + paranoid_check_volumes(ubi); + return 0; + +out_gluebi: + err = ubi_destroy_gluebi(vol); +out_cdev: + cdev_del(&vol->cdev); + return err; +} + +/** + * ubi_free_volume - free volume. + * @ubi: UBI device description object + * @vol: volume description object + * + * This function frees all resources for volume @vol but does not remove it. + * Used only when the UBI device is detached. + */ +void ubi_free_volume(struct ubi_device *ubi, struct ubi_volume *vol) +{ + int err; + + dbg_msg("free volume %d", vol->vol_id); + + ubi->volumes[vol->vol_id] = NULL; + err = ubi_destroy_gluebi(vol); + cdev_del(&vol->cdev); + volume_sysfs_close(vol); +} + +#ifdef CONFIG_MTD_UBI_DEBUG_PARANOID + +/** + * paranoid_check_volume - check volume information. + * @ubi: UBI device description object + * @vol_id: volume ID + */ +static void paranoid_check_volume(struct ubi_device *ubi, int vol_id) +{ + int idx = vol_id2idx(ubi, vol_id); + int reserved_pebs, alignment, data_pad, vol_type, name_len, upd_marker; + const struct ubi_volume *vol; + long long n; + const char *name; + + spin_lock(&ubi->volumes_lock); + reserved_pebs = be32_to_cpu(ubi->vtbl[vol_id].reserved_pebs); + vol = ubi->volumes[idx]; + + if (!vol) { + if (reserved_pebs) { + ubi_err("no volume info, but volume exists"); + goto fail; + } + spin_unlock(&ubi->volumes_lock); + return; + } + + if (vol->exclusive) { + /* + * The volume may be being created at the moment, do not check + * it (e.g., it may be in the middle of ubi_create_volume(). + */ + spin_unlock(&ubi->volumes_lock); + return; + } + + if (vol->reserved_pebs < 0 || vol->alignment < 0 || vol->data_pad < 0 || + vol->name_len < 0) { + ubi_err("negative values"); + goto fail; + } + if (vol->alignment > ubi->leb_size || vol->alignment == 0) { + ubi_err("bad alignment"); + goto fail; + } + + n = vol->alignment & (ubi->min_io_size - 1); + if (vol->alignment != 1 && n) { + ubi_err("alignment is not multiple of min I/O unit"); + goto fail; + } + + n = ubi->leb_size % vol->alignment; + if (vol->data_pad != n) { + ubi_err("bad data_pad, has to be %lld", n); + goto fail; + } + + if (vol->vol_type != UBI_DYNAMIC_VOLUME && + vol->vol_type != UBI_STATIC_VOLUME) { + ubi_err("bad vol_type"); + goto fail; + } + + if (vol->upd_marker && vol->corrupted) { + dbg_err("update marker and corrupted simultaneously"); + goto fail; + } + + if (vol->reserved_pebs > ubi->good_peb_count) { + ubi_err("too large reserved_pebs"); + goto fail; + } + + n = ubi->leb_size - vol->data_pad; + if (vol->usable_leb_size != ubi->leb_size - vol->data_pad) { + ubi_err("bad usable_leb_size, has to be %lld", n); + goto fail; + } + + if (vol->name_len > UBI_VOL_NAME_MAX) { + ubi_err("too long volume name, max is %d", UBI_VOL_NAME_MAX); + goto fail; + } + + if (!vol->name) { + ubi_err("NULL volume name"); + goto fail; + } + + n = strnlen(vol->name, vol->name_len + 1); + if (n != vol->name_len) { + ubi_err("bad name_len %lld", n); + goto fail; + } + + n = (long long)vol->used_ebs * vol->usable_leb_size; + if (vol->vol_type == UBI_DYNAMIC_VOLUME) { + if (vol->corrupted) { + ubi_err("corrupted dynamic volume"); + goto fail; + } + if (vol->used_ebs != vol->reserved_pebs) { + ubi_err("bad used_ebs"); + goto fail; + } + if (vol->last_eb_bytes != vol->usable_leb_size) { + ubi_err("bad last_eb_bytes"); + goto fail; + } + if (vol->used_bytes != n) { + ubi_err("bad used_bytes"); + goto fail; + } + } else { + if (vol->used_ebs < 0 || vol->used_ebs > vol->reserved_pebs) { + ubi_err("bad used_ebs"); + goto fail; + } + if (vol->last_eb_bytes < 0 || + vol->last_eb_bytes > vol->usable_leb_size) { + ubi_err("bad last_eb_bytes"); + goto fail; + } + if (vol->used_bytes < 0 || vol->used_bytes > n || + vol->used_bytes < n - vol->usable_leb_size) { + ubi_err("bad used_bytes"); + goto fail; + } + } + + alignment = be32_to_cpu(ubi->vtbl[vol_id].alignment); + data_pad = be32_to_cpu(ubi->vtbl[vol_id].data_pad); + name_len = be16_to_cpu(ubi->vtbl[vol_id].name_len); + upd_marker = ubi->vtbl[vol_id].upd_marker; + name = &ubi->vtbl[vol_id].name[0]; + if (ubi->vtbl[vol_id].vol_type == UBI_VID_DYNAMIC) + vol_type = UBI_DYNAMIC_VOLUME; + else + vol_type = UBI_STATIC_VOLUME; + + if (alignment != vol->alignment || data_pad != vol->data_pad || + upd_marker != vol->upd_marker || vol_type != vol->vol_type || + name_len!= vol->name_len || strncmp(name, vol->name, name_len)) { + ubi_err("volume info is different"); + goto fail; + } + + spin_unlock(&ubi->volumes_lock); + return; + +fail: + ubi_err("paranoid check failed for volume %d", vol_id); + ubi_dbg_dump_vol_info(vol); + ubi_dbg_dump_vtbl_record(&ubi->vtbl[vol_id], vol_id); + spin_unlock(&ubi->volumes_lock); + BUG(); +} + +/** + * paranoid_check_volumes - check information about all volumes. + * @ubi: UBI device description object + */ +static void paranoid_check_volumes(struct ubi_device *ubi) +{ + int i; + + for (i = 0; i < ubi->vtbl_slots; i++) + paranoid_check_volume(ubi, i); +} +#endif diff --git a/drivers/mtd/ubi/vtbl.c b/drivers/mtd/ubi/vtbl.c new file mode 100644 index 0000000..404e0a3 --- /dev/null +++ b/drivers/mtd/ubi/vtbl.c @@ -0,0 +1,837 @@ +/* + * Copyright (c) International Business Machines Corp., 2006 + * Copyright (c) Nokia Corporation, 2006, 2007 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Author: Artem Bityutskiy (Битюцкий Артём) + */ + +/* + * This file includes volume table manipulation code. The volume table is an + * on-flash table containing volume meta-data like name, number of reserved + * physical eraseblocks, type, etc. The volume table is stored in the so-called + * "layout volume". + * + * The layout volume is an internal volume which is organized as follows. It + * consists of two logical eraseblocks - LEB 0 and LEB 1. Each logical + * eraseblock stores one volume table copy, i.e. LEB 0 and LEB 1 duplicate each + * other. This redundancy guarantees robustness to unclean reboots. The volume + * table is basically an array of volume table records. Each record contains + * full information about the volume and protected by a CRC checksum. + * + * The volume table is changed, it is first changed in RAM. Then LEB 0 is + * erased, and the updated volume table is written back to LEB 0. Then same for + * LEB 1. This scheme guarantees recoverability from unclean reboots. + * + * In this UBI implementation the on-flash volume table does not contain any + * information about how many data static volumes contain. This information may + * be found from the scanning data. + * + * But it would still be beneficial to store this information in the volume + * table. For example, suppose we have a static volume X, and all its physical + * eraseblocks became bad for some reasons. Suppose we are attaching the + * corresponding MTD device, the scanning has found no logical eraseblocks + * corresponding to the volume X. According to the volume table volume X does + * exist. So we don't know whether it is just empty or all its physical + * eraseblocks went bad. So we cannot alarm the user about this corruption. + * + * The volume table also stores so-called "update marker", which is used for + * volume updates. Before updating the volume, the update marker is set, and + * after the update operation is finished, the update marker is cleared. So if + * the update operation was interrupted (e.g. by an unclean reboot) - the + * update marker is still there and we know that the volume's contents is + * damaged. + */ + +#if 0 +#include <linux/crc32.h> +#include <linux/err.h> +#include <asm/div64.h> +#endif + +#include <ubi_uboot.h> +#include "ubi.h" + +#ifdef CONFIG_MTD_UBI_DEBUG_PARANOID +static void paranoid_vtbl_check(const struct ubi_device *ubi); +#else +#define paranoid_vtbl_check(ubi) +#endif + +/* Empty volume table record */ +static struct ubi_vtbl_record empty_vtbl_record; + +/** + * ubi_change_vtbl_record - change volume table record. + * @ubi: UBI device description object + * @idx: table index to change + * @vtbl_rec: new volume table record + * + * This function changes volume table record @idx. If @vtbl_rec is %NULL, empty + * volume table record is written. The caller does not have to calculate CRC of + * the record as it is done by this function. Returns zero in case of success + * and a negative error code in case of failure. + */ +int ubi_change_vtbl_record(struct ubi_device *ubi, int idx, + struct ubi_vtbl_record *vtbl_rec) +{ + int i, err; + uint32_t crc; + struct ubi_volume *layout_vol; + + ubi_assert(idx >= 0 && idx < ubi->vtbl_slots); + layout_vol = ubi->volumes[vol_id2idx(ubi, UBI_LAYOUT_VOLUME_ID)]; + + if (!vtbl_rec) + vtbl_rec = &empty_vtbl_record; + else { + crc = crc32(UBI_CRC32_INIT, vtbl_rec, UBI_VTBL_RECORD_SIZE_CRC); + vtbl_rec->crc = cpu_to_be32(crc); + } + + memcpy(&ubi->vtbl[idx], vtbl_rec, sizeof(struct ubi_vtbl_record)); + for (i = 0; i < UBI_LAYOUT_VOLUME_EBS; i++) { + err = ubi_eba_unmap_leb(ubi, layout_vol, i); + if (err) + return err; + + err = ubi_eba_write_leb(ubi, layout_vol, i, ubi->vtbl, 0, + ubi->vtbl_size, UBI_LONGTERM); + if (err) + return err; + } + + paranoid_vtbl_check(ubi); + return 0; +} + +/** + * vtbl_check - check if volume table is not corrupted and contains sensible + * data. + * @ubi: UBI device description object + * @vtbl: volume table + * + * This function returns zero if @vtbl is all right, %1 if CRC is incorrect, + * and %-EINVAL if it contains inconsistent data. + */ +static int vtbl_check(const struct ubi_device *ubi, + const struct ubi_vtbl_record *vtbl) +{ + int i, n, reserved_pebs, alignment, data_pad, vol_type, name_len; + int upd_marker, err; + uint32_t crc; + const char *name; + + for (i = 0; i < ubi->vtbl_slots; i++) { + cond_resched(); + + reserved_pebs = be32_to_cpu(vtbl[i].reserved_pebs); + alignment = be32_to_cpu(vtbl[i].alignment); + data_pad = be32_to_cpu(vtbl[i].data_pad); + upd_marker = vtbl[i].upd_marker; + vol_type = vtbl[i].vol_type; + name_len = be16_to_cpu(vtbl[i].name_len); + name = &vtbl[i].name[0]; + + crc = crc32(UBI_CRC32_INIT, &vtbl[i], UBI_VTBL_RECORD_SIZE_CRC); + if (be32_to_cpu(vtbl[i].crc) != crc) { + ubi_err("bad CRC at record %u: %#08x, not %#08x", + i, crc, be32_to_cpu(vtbl[i].crc)); + ubi_dbg_dump_vtbl_record(&vtbl[i], i); + return 1; + } + + if (reserved_pebs == 0) { + if (memcmp(&vtbl[i], &empty_vtbl_record, + UBI_VTBL_RECORD_SIZE)) { + err = 2; + goto bad; + } + continue; + } + + if (reserved_pebs < 0 || alignment < 0 || data_pad < 0 || + name_len < 0) { + err = 3; + goto bad; + } + + if (alignment > ubi->leb_size || alignment == 0) { + err = 4; + goto bad; + } + + n = alignment & (ubi->min_io_size - 1); + if (alignment != 1 && n) { + err = 5; + goto bad; + } + + n = ubi->leb_size % alignment; + if (data_pad != n) { + dbg_err("bad data_pad, has to be %d", n); + err = 6; + goto bad; + } + + if (vol_type != UBI_VID_DYNAMIC && vol_type != UBI_VID_STATIC) { + err = 7; + goto bad; + } + + if (upd_marker != 0 && upd_marker != 1) { + err = 8; + goto bad; + } + + if (reserved_pebs > ubi->good_peb_count) { + dbg_err("too large reserved_pebs, good PEBs %d", + ubi->good_peb_count); + err = 9; + goto bad; + } + + if (name_len > UBI_VOL_NAME_MAX) { + err = 10; + goto bad; + } + + if (name[0] == '\0') { + err = 11; + goto bad; + } + + if (name_len != strnlen(name, name_len + 1)) { + err = 12; + goto bad; + } + } + + /* Checks that all names are unique */ + for (i = 0; i < ubi->vtbl_slots - 1; i++) { + for (n = i + 1; n < ubi->vtbl_slots; n++) { + int len1 = be16_to_cpu(vtbl[i].name_len); + int len2 = be16_to_cpu(vtbl[n].name_len); + + if (len1 > 0 && len1 == len2 && + !strncmp(vtbl[i].name, vtbl[n].name, len1)) { + ubi_err("volumes %d and %d have the same name" + " \"%s\"", i, n, vtbl[i].name); + ubi_dbg_dump_vtbl_record(&vtbl[i], i); + ubi_dbg_dump_vtbl_record(&vtbl[n], n); + return -EINVAL; + } + } + } + + return 0; + +bad: + ubi_err("volume table check failed: record %d, error %d", i, err); + ubi_dbg_dump_vtbl_record(&vtbl[i], i); + return -EINVAL; +} + +/** + * create_vtbl - create a copy of volume table. + * @ubi: UBI device description object + * @si: scanning information + * @copy: number of the volume table copy + * @vtbl: contents of the volume table + * + * This function returns zero in case of success and a negative error code in + * case of failure. + */ +static int create_vtbl(struct ubi_device *ubi, struct ubi_scan_info *si, + int copy, void *vtbl) +{ + int err, tries = 0; + static struct ubi_vid_hdr *vid_hdr; + struct ubi_scan_volume *sv; + struct ubi_scan_leb *new_seb, *old_seb = NULL; + + ubi_msg("create volume table (copy #%d)", copy + 1); + + vid_hdr = ubi_zalloc_vid_hdr(ubi, GFP_KERNEL); + if (!vid_hdr) + return -ENOMEM; + + /* + * Check if there is a logical eraseblock which would have to contain + * this volume table copy was found during scanning. It has to be wiped + * out. + */ + sv = ubi_scan_find_sv(si, UBI_LAYOUT_VOLUME_ID); + if (sv) + old_seb = ubi_scan_find_seb(sv, copy); + +retry: + new_seb = ubi_scan_get_free_peb(ubi, si); + if (IS_ERR(new_seb)) { + err = PTR_ERR(new_seb); + goto out_free; + } + + vid_hdr->vol_type = UBI_VID_DYNAMIC; + vid_hdr->vol_id = cpu_to_be32(UBI_LAYOUT_VOLUME_ID); + vid_hdr->compat = UBI_LAYOUT_VOLUME_COMPAT; + vid_hdr->data_size = vid_hdr->used_ebs = + vid_hdr->data_pad = cpu_to_be32(0); + vid_hdr->lnum = cpu_to_be32(copy); + vid_hdr->sqnum = cpu_to_be64(++si->max_sqnum); + vid_hdr->leb_ver = cpu_to_be32(old_seb ? old_seb->leb_ver + 1: 0); + + /* The EC header is already there, write the VID header */ + err = ubi_io_write_vid_hdr(ubi, new_seb->pnum, vid_hdr); + if (err) + goto write_error; + + /* Write the layout volume contents */ + err = ubi_io_write_data(ubi, vtbl, new_seb->pnum, 0, ubi->vtbl_size); + if (err) + goto write_error; + + /* + * And add it to the scanning information. Don't delete the old + * @old_seb as it will be deleted and freed in 'ubi_scan_add_used()'. + */ + err = ubi_scan_add_used(ubi, si, new_seb->pnum, new_seb->ec, + vid_hdr, 0); + kfree(new_seb); + ubi_free_vid_hdr(ubi, vid_hdr); + return err; + +write_error: + if (err == -EIO && ++tries <= 5) { + /* + * Probably this physical eraseblock went bad, try to pick + * another one. + */ + list_add_tail(&new_seb->u.list, &si->corr); + goto retry; + } + kfree(new_seb); +out_free: + ubi_free_vid_hdr(ubi, vid_hdr); + return err; + +} + +/** + * process_lvol - process the layout volume. + * @ubi: UBI device description object + * @si: scanning information + * @sv: layout volume scanning information + * + * This function is responsible for reading the layout volume, ensuring it is + * not corrupted, and recovering from corruptions if needed. Returns volume + * table in case of success and a negative error code in case of failure. + */ +static struct ubi_vtbl_record *process_lvol(struct ubi_device *ubi, + struct ubi_scan_info *si, + struct ubi_scan_volume *sv) +{ + int err; + struct rb_node *rb; + struct ubi_scan_leb *seb; + struct ubi_vtbl_record *leb[UBI_LAYOUT_VOLUME_EBS] = { NULL, NULL }; + int leb_corrupted[UBI_LAYOUT_VOLUME_EBS] = {1, 1}; + + /* + * UBI goes through the following steps when it changes the layout + * volume: + * a. erase LEB 0; + * b. write new data to LEB 0; + * c. erase LEB 1; + * d. write new data to LEB 1. + * + * Before the change, both LEBs contain the same data. + * + * Due to unclean reboots, the contents of LEB 0 may be lost, but there + * should LEB 1. So it is OK if LEB 0 is corrupted while LEB 1 is not. + * Similarly, LEB 1 may be lost, but there should be LEB 0. And + * finally, unclean reboots may result in a situation when neither LEB + * 0 nor LEB 1 are corrupted, but they are different. In this case, LEB + * 0 contains more recent information. + * + * So the plan is to first check LEB 0. Then + * a. if LEB 0 is OK, it must be containing the most resent data; then + * we compare it with LEB 1, and if they are different, we copy LEB + * 0 to LEB 1; + * b. if LEB 0 is corrupted, but LEB 1 has to be OK, and we copy LEB 1 + * to LEB 0. + */ + + dbg_msg("check layout volume"); + + /* Read both LEB 0 and LEB 1 into memory */ + ubi_rb_for_each_entry(rb, seb, &sv->root, u.rb) { + leb[seb->lnum] = vmalloc(ubi->vtbl_size); + if (!leb[seb->lnum]) { + err = -ENOMEM; + goto out_free; + } + memset(leb[seb->lnum], 0, ubi->vtbl_size); + + err = ubi_io_read_data(ubi, leb[seb->lnum], seb->pnum, 0, + ubi->vtbl_size); + if (err == UBI_IO_BITFLIPS || err == -EBADMSG) + /* + * Scrub the PEB later. Note, -EBADMSG indicates an + * uncorrectable ECC error, but we have our own CRC and + * the data will be checked later. If the data is OK, + * the PEB will be scrubbed (because we set + * seb->scrub). If the data is not OK, the contents of + * the PEB will be recovered from the second copy, and + * seb->scrub will be cleared in + * 'ubi_scan_add_used()'. + */ + seb->scrub = 1; + else if (err) + goto out_free; + } + + err = -EINVAL; + if (leb[0]) { + leb_corrupted[0] = vtbl_check(ubi, leb[0]); + if (leb_corrupted[0] < 0) + goto out_free; + } + + if (!leb_corrupted[0]) { + /* LEB 0 is OK */ + if (leb[1]) + leb_corrupted[1] = memcmp(leb[0], leb[1], ubi->vtbl_size); + if (leb_corrupted[1]) { + ubi_warn("volume table copy #2 is corrupted"); + err = create_vtbl(ubi, si, 1, leb[0]); + if (err) + goto out_free; + ubi_msg("volume table was restored"); + } + + /* Both LEB 1 and LEB 2 are OK and consistent */ + vfree(leb[1]); + return leb[0]; + } else { + /* LEB 0 is corrupted or does not exist */ + if (leb[1]) { + leb_corrupted[1] = vtbl_check(ubi, leb[1]); + if (leb_corrupted[1] < 0) + goto out_free; + } + if (leb_corrupted[1]) { + /* Both LEB 0 and LEB 1 are corrupted */ + ubi_err("both volume tables are corrupted"); + goto out_free; + } + + ubi_warn("volume table copy #1 is corrupted"); + err = create_vtbl(ubi, si, 0, leb[1]); + if (err) + goto out_free; + ubi_msg("volume table was restored"); + + vfree(leb[0]); + return leb[1]; + } + +out_free: + vfree(leb[0]); + vfree(leb[1]); + return ERR_PTR(err); +} + +/** + * create_empty_lvol - create empty layout volume. + * @ubi: UBI device description object + * @si: scanning information + * + * This function returns volume table contents in case of success and a + * negative error code in case of failure. + */ +static struct ubi_vtbl_record *create_empty_lvol(struct ubi_device *ubi, + struct ubi_scan_info *si) +{ + int i; + struct ubi_vtbl_record *vtbl; + + vtbl = vmalloc(ubi->vtbl_size); + if (!vtbl) + return ERR_PTR(-ENOMEM); + memset(vtbl, 0, ubi->vtbl_size); + + for (i = 0; i < ubi->vtbl_slots; i++) + memcpy(&vtbl[i], &empty_vtbl_record, UBI_VTBL_RECORD_SIZE); + + for (i = 0; i < UBI_LAYOUT_VOLUME_EBS; i++) { + int err; + + err = create_vtbl(ubi, si, i, vtbl); + if (err) { + vfree(vtbl); + return ERR_PTR(err); + } + } + + return vtbl; +} + +/** + * init_volumes - initialize volume information for existing volumes. + * @ubi: UBI device description object + * @si: scanning information + * @vtbl: volume table + * + * This function allocates volume description objects for existing volumes. + * Returns zero in case of success and a negative error code in case of + * failure. + */ +static int init_volumes(struct ubi_device *ubi, const struct ubi_scan_info *si, + const struct ubi_vtbl_record *vtbl) +{ + int i, reserved_pebs = 0; + struct ubi_scan_volume *sv; + struct ubi_volume *vol; + + for (i = 0; i < ubi->vtbl_slots; i++) { + cond_resched(); + + if (be32_to_cpu(vtbl[i].reserved_pebs) == 0) + continue; /* Empty record */ + + vol = kzalloc(sizeof(struct ubi_volume), GFP_KERNEL); + if (!vol) + return -ENOMEM; + + vol->reserved_pebs = be32_to_cpu(vtbl[i].reserved_pebs); + vol->alignment = be32_to_cpu(vtbl[i].alignment); + vol->data_pad = be32_to_cpu(vtbl[i].data_pad); + vol->vol_type = vtbl[i].vol_type == UBI_VID_DYNAMIC ? + UBI_DYNAMIC_VOLUME : UBI_STATIC_VOLUME; + vol->name_len = be16_to_cpu(vtbl[i].name_len); + vol->usable_leb_size = ubi->leb_size - vol->data_pad; + memcpy(vol->name, vtbl[i].name, vol->name_len); + vol->name[vol->name_len] = '\0'; + vol->vol_id = i; + + if (vtbl[i].flags & UBI_VTBL_AUTORESIZE_FLG) { + /* Auto re-size flag may be set only for one volume */ + if (ubi->autoresize_vol_id != -1) { + ubi_err("more then one auto-resize volume (%d " + "and %d)", ubi->autoresize_vol_id, i); + kfree(vol); + return -EINVAL; + } + + ubi->autoresize_vol_id = i; + } + + ubi_assert(!ubi->volumes[i]); + ubi->volumes[i] = vol; + ubi->vol_count += 1; + vol->ubi = ubi; + reserved_pebs += vol->reserved_pebs; + + /* + * In case of dynamic volume UBI knows nothing about how many + * data is stored there. So assume the whole volume is used. + */ + if (vol->vol_type == UBI_DYNAMIC_VOLUME) { + vol->used_ebs = vol->reserved_pebs; + vol->last_eb_bytes = vol->usable_leb_size; + vol->used_bytes = + (long long)vol->used_ebs * vol->usable_leb_size; + continue; + } + + /* Static volumes only */ + sv = ubi_scan_find_sv(si, i); + if (!sv) { + /* + * No eraseblocks belonging to this volume found. We + * don't actually know whether this static volume is + * completely corrupted or just contains no data. And + * we cannot know this as long as data size is not + * stored on flash. So we just assume the volume is + * empty. FIXME: this should be handled. + */ + continue; + } + + if (sv->leb_count != sv->used_ebs) { + /* + * We found a static volume which misses several + * eraseblocks. Treat it as corrupted. + */ + ubi_warn("static volume %d misses %d LEBs - corrupted", + sv->vol_id, sv->used_ebs - sv->leb_count); + vol->corrupted = 1; + continue; + } + + vol->used_ebs = sv->used_ebs; + vol->used_bytes = + (long long)(vol->used_ebs - 1) * vol->usable_leb_size; + vol->used_bytes += sv->last_data_size; + vol->last_eb_bytes = sv->last_data_size; + } + + /* And add the layout volume */ + vol = kzalloc(sizeof(struct ubi_volume), GFP_KERNEL); + if (!vol) + return -ENOMEM; + + vol->reserved_pebs = UBI_LAYOUT_VOLUME_EBS; + vol->alignment = 1; + vol->vol_type = UBI_DYNAMIC_VOLUME; + vol->name_len = sizeof(UBI_LAYOUT_VOLUME_NAME) - 1; + memcpy(vol->name, UBI_LAYOUT_VOLUME_NAME, vol->name_len + 1); + vol->usable_leb_size = ubi->leb_size; + vol->used_ebs = vol->reserved_pebs; + vol->last_eb_bytes = vol->reserved_pebs; + vol->used_bytes = + (long long)vol->used_ebs * (ubi->leb_size - vol->data_pad); + vol->vol_id = UBI_LAYOUT_VOLUME_ID; + vol->ref_count = 1; + + ubi_assert(!ubi->volumes[i]); + ubi->volumes[vol_id2idx(ubi, vol->vol_id)] = vol; + reserved_pebs += vol->reserved_pebs; + ubi->vol_count += 1; + vol->ubi = ubi; + + if (reserved_pebs > ubi->avail_pebs) + ubi_err("not enough PEBs, required %d, available %d", + reserved_pebs, ubi->avail_pebs); + ubi->rsvd_pebs += reserved_pebs; + ubi->avail_pebs -= reserved_pebs; + + return 0; +} + +/** + * check_sv - check volume scanning information. + * @vol: UBI volume description object + * @sv: volume scanning information + * + * This function returns zero if the volume scanning information is consistent + * to the data read from the volume tabla, and %-EINVAL if not. + */ +static int check_sv(const struct ubi_volume *vol, + const struct ubi_scan_volume *sv) +{ + int err; + + if (sv->highest_lnum >= vol->reserved_pebs) { + err = 1; + goto bad; + } + if (sv->leb_count > vol->reserved_pebs) { + err = 2; + goto bad; + } + if (sv->vol_type != vol->vol_type) { + err = 3; + goto bad; + } + if (sv->used_ebs > vol->reserved_pebs) { + err = 4; + goto bad; + } + if (sv->data_pad != vol->data_pad) { + err = 5; + goto bad; + } + return 0; + +bad: + ubi_err("bad scanning information, error %d", err); + ubi_dbg_dump_sv(sv); + ubi_dbg_dump_vol_info(vol); + return -EINVAL; +} + +/** + * check_scanning_info - check that scanning information. + * @ubi: UBI device description object + * @si: scanning information + * + * Even though we protect on-flash data by CRC checksums, we still don't trust + * the media. This function ensures that scanning information is consistent to + * the information read from the volume table. Returns zero if the scanning + * information is OK and %-EINVAL if it is not. + */ +static int check_scanning_info(const struct ubi_device *ubi, + struct ubi_scan_info *si) +{ + int err, i; + struct ubi_scan_volume *sv; + struct ubi_volume *vol; + + if (si->vols_found > UBI_INT_VOL_COUNT + ubi->vtbl_slots) { + ubi_err("scanning found %d volumes, maximum is %d + %d", + si->vols_found, UBI_INT_VOL_COUNT, ubi->vtbl_slots); + return -EINVAL; + } + + if (si->highest_vol_id >= ubi->vtbl_slots + UBI_INT_VOL_COUNT && + si->highest_vol_id < UBI_INTERNAL_VOL_START) { + ubi_err("too large volume ID %d found by scanning", + si->highest_vol_id); + return -EINVAL; + } + + for (i = 0; i < ubi->vtbl_slots + UBI_INT_VOL_COUNT; i++) { + cond_resched(); + + sv = ubi_scan_find_sv(si, i); + vol = ubi->volumes[i]; + if (!vol) { + if (sv) + ubi_scan_rm_volume(si, sv); + continue; + } + + if (vol->reserved_pebs == 0) { + ubi_assert(i < ubi->vtbl_slots); + + if (!sv) + continue; + + /* + * During scanning we found a volume which does not + * exist according to the information in the volume + * table. This must have happened due to an unclean + * reboot while the volume was being removed. Discard + * these eraseblocks. + */ + ubi_msg("finish volume %d removal", sv->vol_id); + ubi_scan_rm_volume(si, sv); + } else if (sv) { + err = check_sv(vol, sv); + if (err) + return err; + } + } + + return 0; +} + +/** + * ubi_read_volume_table - read volume table. + * information. + * @ubi: UBI device description object + * @si: scanning information + * + * This function reads volume table, checks it, recover from errors if needed, + * or creates it if needed. Returns zero in case of success and a negative + * error code in case of failure. + */ +int ubi_read_volume_table(struct ubi_device *ubi, struct ubi_scan_info *si) +{ + int i, err; + struct ubi_scan_volume *sv; + + empty_vtbl_record.crc = cpu_to_be32(0xf116c36b); + + /* + * The number of supported volumes is limited by the eraseblock size + * and by the UBI_MAX_VOLUMES constant. + */ + ubi->vtbl_slots = ubi->leb_size / UBI_VTBL_RECORD_SIZE; + if (ubi->vtbl_slots > UBI_MAX_VOLUMES) + ubi->vtbl_slots = UBI_MAX_VOLUMES; + + ubi->vtbl_size = ubi->vtbl_slots * UBI_VTBL_RECORD_SIZE; + ubi->vtbl_size = ALIGN(ubi->vtbl_size, ubi->min_io_size); + + sv = ubi_scan_find_sv(si, UBI_LAYOUT_VOLUME_ID); + if (!sv) { + /* + * No logical eraseblocks belonging to the layout volume were + * found. This could mean that the flash is just empty. In + * this case we create empty layout volume. + * + * But if flash is not empty this must be a corruption or the + * MTD device just contains garbage. + */ + if (si->is_empty) { + ubi->vtbl = create_empty_lvol(ubi, si); + if (IS_ERR(ubi->vtbl)) + return PTR_ERR(ubi->vtbl); + } else { + ubi_err("the layout volume was not found"); + return -EINVAL; + } + } else { + if (sv->leb_count > UBI_LAYOUT_VOLUME_EBS) { + /* This must not happen with proper UBI images */ + dbg_err("too many LEBs (%d) in layout volume", + sv->leb_count); + return -EINVAL; + } + + ubi->vtbl = process_lvol(ubi, si, sv); + if (IS_ERR(ubi->vtbl)) + return PTR_ERR(ubi->vtbl); + } + + ubi->avail_pebs = ubi->good_peb_count; + + /* + * The layout volume is OK, initialize the corresponding in-RAM data + * structures. + */ + err = init_volumes(ubi, si, ubi->vtbl); + if (err) + goto out_free; + + /* + * Get sure that the scanning information is consistent to the + * information stored in the volume table. + */ + err = check_scanning_info(ubi, si); + if (err) + goto out_free; + + return 0; + +out_free: + vfree(ubi->vtbl); + for (i = 0; i < ubi->vtbl_slots + UBI_INT_VOL_COUNT; i++) + if (ubi->volumes[i]) { + kfree(ubi->volumes[i]); + ubi->volumes[i] = NULL; + } + return err; +} + +#ifdef CONFIG_MTD_UBI_DEBUG_PARANOID + +/** + * paranoid_vtbl_check - check volume table. + * @ubi: UBI device description object + */ +static void paranoid_vtbl_check(const struct ubi_device *ubi) +{ + if (vtbl_check(ubi, ubi->vtbl)) { + ubi_err("paranoid check failed"); + BUG(); + } +} + +#endif /* CONFIG_MTD_UBI_DEBUG_PARANOID */ diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c new file mode 100644 index 0000000..6d27210 --- /dev/null +++ b/drivers/mtd/ubi/wl.c @@ -0,0 +1,1670 @@ +/* + * Copyright (c) International Business Machines Corp., 2006 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Authors: Artem Bityutskiy (Битюцкий Артём), Thomas Gleixner + */ + +/* + * UBI wear-leveling unit. + * + * This unit is responsible for wear-leveling. It works in terms of physical + * eraseblocks and erase counters and knows nothing about logical eraseblocks, + * volumes, etc. From this unit's perspective all physical eraseblocks are of + * two types - used and free. Used physical eraseblocks are those that were + * "get" by the 'ubi_wl_get_peb()' function, and free physical eraseblocks are + * those that were put by the 'ubi_wl_put_peb()' function. + * + * Physical eraseblocks returned by 'ubi_wl_get_peb()' have only erase counter + * header. The rest of the physical eraseblock contains only 0xFF bytes. + * + * When physical eraseblocks are returned to the WL unit by means of the + * 'ubi_wl_put_peb()' function, they are scheduled for erasure. The erasure is + * done asynchronously in context of the per-UBI device background thread, + * which is also managed by the WL unit. + * + * The wear-leveling is ensured by means of moving the contents of used + * physical eraseblocks with low erase counter to free physical eraseblocks + * with high erase counter. + * + * The 'ubi_wl_get_peb()' function accepts data type hints which help to pick + * an "optimal" physical eraseblock. For example, when it is known that the + * physical eraseblock will be "put" soon because it contains short-term data, + * the WL unit may pick a free physical eraseblock with low erase counter, and + * so forth. + * + * If the WL unit fails to erase a physical eraseblock, it marks it as bad. + * + * This unit is also responsible for scrubbing. If a bit-flip is detected in a + * physical eraseblock, it has to be moved. Technically this is the same as + * moving it for wear-leveling reasons. + * + * As it was said, for the UBI unit all physical eraseblocks are either "free" + * or "used". Free eraseblock are kept in the @wl->free RB-tree, while used + * eraseblocks are kept in a set of different RB-trees: @wl->used, + * @wl->prot.pnum, @wl->prot.aec, and @wl->scrub. + * + * Note, in this implementation, we keep a small in-RAM object for each physical + * eraseblock. This is surely not a scalable solution. But it appears to be good + * enough for moderately large flashes and it is simple. In future, one may + * re-work this unit and make it more scalable. + * + * At the moment this unit does not utilize the sequence number, which was + * introduced relatively recently. But it would be wise to do this because the + * sequence number of a logical eraseblock characterizes how old is it. For + * example, when we move a PEB with low erase counter, and we need to pick the + * target PEB, we pick a PEB with the highest EC if our PEB is "old" and we + * pick target PEB with an average EC if our PEB is not very "old". This is a + * room for future re-works of the WL unit. + * + * FIXME: looks too complex, should be simplified (later). + */ + +#if 0 +#include <linux/slab.h> +#include <linux/crc32.h> +#include <linux/freezer.h> +#include <linux/kthread.h> +#endif + +#include <ubi_uboot.h> +#include "ubi.h" + +/* Number of physical eraseblocks reserved for wear-leveling purposes */ +#define WL_RESERVED_PEBS 1 + +/* + * How many erase cycles are short term, unknown, and long term physical + * eraseblocks protected. + */ +#define ST_PROTECTION 16 +#define U_PROTECTION 10 +#define LT_PROTECTION 4 + +/* + * Maximum difference between two erase counters. If this threshold is + * exceeded, the WL unit starts moving data from used physical eraseblocks with + * low erase counter to free physical eraseblocks with high erase counter. + */ +#define UBI_WL_THRESHOLD CONFIG_MTD_UBI_WL_THRESHOLD + +/* + * When a physical eraseblock is moved, the WL unit has to pick the target + * physical eraseblock to move to. The simplest way would be just to pick the + * one with the highest erase counter. But in certain workloads this could lead + * to an unlimited wear of one or few physical eraseblock. Indeed, imagine a + * situation when the picked physical eraseblock is constantly erased after the + * data is written to it. So, we have a constant which limits the highest erase + * counter of the free physical eraseblock to pick. Namely, the WL unit does + * not pick eraseblocks with erase counter greater then the lowest erase + * counter plus %WL_FREE_MAX_DIFF. + */ +#define WL_FREE_MAX_DIFF (2*UBI_WL_THRESHOLD) + +/* + * Maximum number of consecutive background thread failures which is enough to + * switch to read-only mode. + */ +#define WL_MAX_FAILURES 32 + +/** + * struct ubi_wl_prot_entry - PEB protection entry. + * @rb_pnum: link in the @wl->prot.pnum RB-tree + * @rb_aec: link in the @wl->prot.aec RB-tree + * @abs_ec: the absolute erase counter value when the protection ends + * @e: the wear-leveling entry of the physical eraseblock under protection + * + * When the WL unit returns a physical eraseblock, the physical eraseblock is + * protected from being moved for some "time". For this reason, the physical + * eraseblock is not directly moved from the @wl->free tree to the @wl->used + * tree. There is one more tree in between where this physical eraseblock is + * temporarily stored (@wl->prot). + * + * All this protection stuff is needed because: + * o we don't want to move physical eraseblocks just after we have given them + * to the user; instead, we first want to let users fill them up with data; + * + * o there is a chance that the user will put the physical eraseblock very + * soon, so it makes sense not to move it for some time, but wait; this is + * especially important in case of "short term" physical eraseblocks. + * + * Physical eraseblocks stay protected only for limited time. But the "time" is + * measured in erase cycles in this case. This is implemented with help of the + * absolute erase counter (@wl->abs_ec). When it reaches certain value, the + * physical eraseblocks are moved from the protection trees (@wl->prot.*) to + * the @wl->used tree. + * + * Protected physical eraseblocks are searched by physical eraseblock number + * (when they are put) and by the absolute erase counter (to check if it is + * time to move them to the @wl->used tree). So there are actually 2 RB-trees + * storing the protected physical eraseblocks: @wl->prot.pnum and + * @wl->prot.aec. They are referred to as the "protection" trees. The + * first one is indexed by the physical eraseblock number. The second one is + * indexed by the absolute erase counter. Both trees store + * &struct ubi_wl_prot_entry objects. + * + * Each physical eraseblock has 2 main states: free and used. The former state + * corresponds to the @wl->free tree. The latter state is split up on several + * sub-states: + * o the WL movement is allowed (@wl->used tree); + * o the WL movement is temporarily prohibited (@wl->prot.pnum and + * @wl->prot.aec trees); + * o scrubbing is needed (@wl->scrub tree). + * + * Depending on the sub-state, wear-leveling entries of the used physical + * eraseblocks may be kept in one of those trees. + */ +struct ubi_wl_prot_entry { + struct rb_node rb_pnum; + struct rb_node rb_aec; + unsigned long long abs_ec; + struct ubi_wl_entry *e; +}; + +/** + * struct ubi_work - UBI work description data structure. + * @list: a link in the list of pending works + * @func: worker function + * @priv: private data of the worker function + * + * @e: physical eraseblock to erase + * @torture: if the physical eraseblock has to be tortured + * + * The @func pointer points to the worker function. If the @cancel argument is + * not zero, the worker has to free the resources and exit immediately. The + * worker has to return zero in case of success and a negative error code in + * case of failure. + */ +struct ubi_work { + struct list_head list; + int (*func)(struct ubi_device *ubi, struct ubi_work *wrk, int cancel); + /* The below fields are only relevant to erasure works */ + struct ubi_wl_entry *e; + int torture; +}; + +#ifdef CONFIG_MTD_UBI_DEBUG_PARANOID +static int paranoid_check_ec(struct ubi_device *ubi, int pnum, int ec); +static int paranoid_check_in_wl_tree(struct ubi_wl_entry *e, + struct rb_root *root); +#else +#define paranoid_check_ec(ubi, pnum, ec) 0 +#define paranoid_check_in_wl_tree(e, root) +#endif + +/** + * wl_tree_add - add a wear-leveling entry to a WL RB-tree. + * @e: the wear-leveling entry to add + * @root: the root of the tree + * + * Note, we use (erase counter, physical eraseblock number) pairs as keys in + * the @ubi->used and @ubi->free RB-trees. + */ +static void wl_tree_add(struct ubi_wl_entry *e, struct rb_root *root) +{ + struct rb_node **p, *parent = NULL; + + p = &root->rb_node; + while (*p) { + struct ubi_wl_entry *e1; + + parent = *p; + e1 = rb_entry(parent, struct ubi_wl_entry, rb); + + if (e->ec < e1->ec) + p = &(*p)->rb_left; + else if (e->ec > e1->ec) + p = &(*p)->rb_right; + else { + ubi_assert(e->pnum != e1->pnum); + if (e->pnum < e1->pnum) + p = &(*p)->rb_left; + else + p = &(*p)->rb_right; + } + } + + rb_link_node(&e->rb, parent, p); + rb_insert_color(&e->rb, root); +} + +/** + * do_work - do one pending work. + * @ubi: UBI device description object + * + * This function returns zero in case of success and a negative error code in + * case of failure. + */ +static int do_work(struct ubi_device *ubi) +{ + int err; + struct ubi_work *wrk; + + cond_resched(); + + /* + * @ubi->work_sem is used to synchronize with the workers. Workers take + * it in read mode, so many of them may be doing works at a time. But + * the queue flush code has to be sure the whole queue of works is + * done, and it takes the mutex in write mode. + */ + down_read(&ubi->work_sem); + spin_lock(&ubi->wl_lock); + if (list_empty(&ubi->works)) { + spin_unlock(&ubi->wl_lock); + up_read(&ubi->work_sem); + return 0; + } + + wrk = list_entry(ubi->works.next, struct ubi_work, list); + list_del(&wrk->list); + ubi->works_count -= 1; + ubi_assert(ubi->works_count >= 0); + spin_unlock(&ubi->wl_lock); + + /* + * Call the worker function. Do not touch the work structure + * after this call as it will have been freed or reused by that + * time by the worker function. + */ + err = wrk->func(ubi, wrk, 0); + if (err) + ubi_err("work failed with error code %d", err); + up_read(&ubi->work_sem); + + return err; +} + +/** + * produce_free_peb - produce a free physical eraseblock. + * @ubi: UBI device description object + * + * This function tries to make a free PEB by means of synchronous execution of + * pending works. This may be needed if, for example the background thread is + * disabled. Returns zero in case of success and a negative error code in case + * of failure. + */ +static int produce_free_peb(struct ubi_device *ubi) +{ + int err; + + spin_lock(&ubi->wl_lock); + while (!ubi->free.rb_node) { + spin_unlock(&ubi->wl_lock); + + dbg_wl("do one work synchronously"); + err = do_work(ubi); + if (err) + return err; + + spin_lock(&ubi->wl_lock); + } + spin_unlock(&ubi->wl_lock); + + return 0; +} + +/** + * in_wl_tree - check if wear-leveling entry is present in a WL RB-tree. + * @e: the wear-leveling entry to check + * @root: the root of the tree + * + * This function returns non-zero if @e is in the @root RB-tree and zero if it + * is not. + */ +static int in_wl_tree(struct ubi_wl_entry *e, struct rb_root *root) +{ + struct rb_node *p; + + p = root->rb_node; + while (p) { + struct ubi_wl_entry *e1; + + e1 = rb_entry(p, struct ubi_wl_entry, rb); + + if (e->pnum == e1->pnum) { + ubi_assert(e == e1); + return 1; + } + + if (e->ec < e1->ec) + p = p->rb_left; + else if (e->ec > e1->ec) + p = p->rb_right; + else { + ubi_assert(e->pnum != e1->pnum); + if (e->pnum < e1->pnum) + p = p->rb_left; + else + p = p->rb_right; + } + } + + return 0; +} + +/** + * prot_tree_add - add physical eraseblock to protection trees. + * @ubi: UBI device description object + * @e: the physical eraseblock to add + * @pe: protection entry object to use + * @abs_ec: absolute erase counter value when this physical eraseblock has + * to be removed from the protection trees. + * + * @wl->lock has to be locked. + */ +static void prot_tree_add(struct ubi_device *ubi, struct ubi_wl_entry *e, + struct ubi_wl_prot_entry *pe, int abs_ec) +{ + struct rb_node **p, *parent = NULL; + struct ubi_wl_prot_entry *pe1; + + pe->e = e; + pe->abs_ec = ubi->abs_ec + abs_ec; + + p = &ubi->prot.pnum.rb_node; + while (*p) { + parent = *p; + pe1 = rb_entry(parent, struct ubi_wl_prot_entry, rb_pnum); + + if (e->pnum < pe1->e->pnum) + p = &(*p)->rb_left; + else + p = &(*p)->rb_right; + } + rb_link_node(&pe->rb_pnum, parent, p); + rb_insert_color(&pe->rb_pnum, &ubi->prot.pnum); + + p = &ubi->prot.aec.rb_node; + parent = NULL; + while (*p) { + parent = *p; + pe1 = rb_entry(parent, struct ubi_wl_prot_entry, rb_aec); + + if (pe->abs_ec < pe1->abs_ec) + p = &(*p)->rb_left; + else + p = &(*p)->rb_right; + } + rb_link_node(&pe->rb_aec, parent, p); + rb_insert_color(&pe->rb_aec, &ubi->prot.aec); +} + +/** + * find_wl_entry - find wear-leveling entry closest to certain erase counter. + * @root: the RB-tree where to look for + * @max: highest possible erase counter + * + * This function looks for a wear leveling entry with erase counter closest to + * @max and less then @max. + */ +static struct ubi_wl_entry *find_wl_entry(struct rb_root *root, int max) +{ + struct rb_node *p; + struct ubi_wl_entry *e; + + e = rb_entry(rb_first(root), struct ubi_wl_entry, rb); + max += e->ec; + + p = root->rb_node; + while (p) { + struct ubi_wl_entry *e1; + + e1 = rb_entry(p, struct ubi_wl_entry, rb); + if (e1->ec >= max) + p = p->rb_left; + else { + p = p->rb_right; + e = e1; + } + } + + return e; +} + +/** + * ubi_wl_get_peb - get a physical eraseblock. + * @ubi: UBI device description object + * @dtype: type of data which will be stored in this physical eraseblock + * + * This function returns a physical eraseblock in case of success and a + * negative error code in case of failure. Might sleep. + */ +int ubi_wl_get_peb(struct ubi_device *ubi, int dtype) +{ + int err, protect, medium_ec; + struct ubi_wl_entry *e, *first, *last; + struct ubi_wl_prot_entry *pe; + + ubi_assert(dtype == UBI_LONGTERM || dtype == UBI_SHORTTERM || + dtype == UBI_UNKNOWN); + + pe = kmalloc(sizeof(struct ubi_wl_prot_entry), GFP_NOFS); + if (!pe) + return -ENOMEM; + +retry: + spin_lock(&ubi->wl_lock); + if (!ubi->free.rb_node) { + if (ubi->works_count == 0) { + ubi_assert(list_empty(&ubi->works)); + ubi_err("no free eraseblocks"); + spin_unlock(&ubi->wl_lock); + kfree(pe); + return -ENOSPC; + } + spin_unlock(&ubi->wl_lock); + + err = produce_free_peb(ubi); + if (err < 0) { + kfree(pe); + return err; + } + goto retry; + } + + switch (dtype) { + case UBI_LONGTERM: + /* + * For long term data we pick a physical eraseblock + * with high erase counter. But the highest erase + * counter we can pick is bounded by the the lowest + * erase counter plus %WL_FREE_MAX_DIFF. + */ + e = find_wl_entry(&ubi->free, WL_FREE_MAX_DIFF); + protect = LT_PROTECTION; + break; + case UBI_UNKNOWN: + /* + * For unknown data we pick a physical eraseblock with + * medium erase counter. But we by no means can pick a + * physical eraseblock with erase counter greater or + * equivalent than the lowest erase counter plus + * %WL_FREE_MAX_DIFF. + */ + first = rb_entry(rb_first(&ubi->free), + struct ubi_wl_entry, rb); + last = rb_entry(rb_last(&ubi->free), + struct ubi_wl_entry, rb); + + if (last->ec - first->ec < WL_FREE_MAX_DIFF) + e = rb_entry(ubi->free.rb_node, + struct ubi_wl_entry, rb); + else { + medium_ec = (first->ec + WL_FREE_MAX_DIFF)/2; + e = find_wl_entry(&ubi->free, medium_ec); + } + protect = U_PROTECTION; + break; + case UBI_SHORTTERM: + /* + * For short term data we pick a physical eraseblock + * with the lowest erase counter as we expect it will + * be erased soon. + */ + e = rb_entry(rb_first(&ubi->free), + struct ubi_wl_entry, rb); + protect = ST_PROTECTION; + break; + default: + protect = 0; + e = NULL; + BUG(); + } + + /* + * Move the physical eraseblock to the protection trees where it will + * be protected from being moved for some time. + */ + paranoid_check_in_wl_tree(e, &ubi->free); + rb_erase(&e->rb, &ubi->free); + prot_tree_add(ubi, e, pe, protect); + + dbg_wl("PEB %d EC %d, protection %d", e->pnum, e->ec, protect); + spin_unlock(&ubi->wl_lock); + + return e->pnum; +} + +/** + * prot_tree_del - remove a physical eraseblock from the protection trees + * @ubi: UBI device description object + * @pnum: the physical eraseblock to remove + * + * This function returns PEB @pnum from the protection trees and returns zero + * in case of success and %-ENODEV if the PEB was not found in the protection + * trees. + */ +static int prot_tree_del(struct ubi_device *ubi, int pnum) +{ + struct rb_node *p; + struct ubi_wl_prot_entry *pe = NULL; + + p = ubi->prot.pnum.rb_node; + while (p) { + + pe = rb_entry(p, struct ubi_wl_prot_entry, rb_pnum); + + if (pnum == pe->e->pnum) + goto found; + + if (pnum < pe->e->pnum) + p = p->rb_left; + else + p = p->rb_right; + } + + return -ENODEV; + +found: + ubi_assert(pe->e->pnum == pnum); + rb_erase(&pe->rb_aec, &ubi->prot.aec); + rb_erase(&pe->rb_pnum, &ubi->prot.pnum); + kfree(pe); + return 0; +} + +/** + * sync_erase - synchronously erase a physical eraseblock. + * @ubi: UBI device description object + * @e: the the physical eraseblock to erase + * @torture: if the physical eraseblock has to be tortured + * + * This function returns zero in case of success and a negative error code in + * case of failure. + */ +static int sync_erase(struct ubi_device *ubi, struct ubi_wl_entry *e, int torture) +{ + int err; + struct ubi_ec_hdr *ec_hdr; + unsigned long long ec = e->ec; + + dbg_wl("erase PEB %d, old EC %llu", e->pnum, ec); + + err = paranoid_check_ec(ubi, e->pnum, e->ec); + if (err > 0) + return -EINVAL; + + ec_hdr = kzalloc(ubi->ec_hdr_alsize, GFP_NOFS); + if (!ec_hdr) + return -ENOMEM; + + err = ubi_io_sync_erase(ubi, e->pnum, torture); + if (err < 0) + goto out_free; + + ec += err; + if (ec > UBI_MAX_ERASECOUNTER) { + /* + * Erase counter overflow. Upgrade UBI and use 64-bit + * erase counters internally. + */ + ubi_err("erase counter overflow at PEB %d, EC %llu", + e->pnum, ec); + err = -EINVAL; + goto out_free; + } + + dbg_wl("erased PEB %d, new EC %llu", e->pnum, ec); + + ec_hdr->ec = cpu_to_be64(ec); + + err = ubi_io_write_ec_hdr(ubi, e->pnum, ec_hdr); + if (err) + goto out_free; + + e->ec = ec; + spin_lock(&ubi->wl_lock); + if (e->ec > ubi->max_ec) + ubi->max_ec = e->ec; + spin_unlock(&ubi->wl_lock); + +out_free: + kfree(ec_hdr); + return err; +} + +/** + * check_protection_over - check if it is time to stop protecting some + * physical eraseblocks. + * @ubi: UBI device description object + * + * This function is called after each erase operation, when the absolute erase + * counter is incremented, to check if some physical eraseblock have not to be + * protected any longer. These physical eraseblocks are moved from the + * protection trees to the used tree. + */ +static void check_protection_over(struct ubi_device *ubi) +{ + struct ubi_wl_prot_entry *pe; + + /* + * There may be several protected physical eraseblock to remove, + * process them all. + */ + while (1) { + spin_lock(&ubi->wl_lock); + if (!ubi->prot.aec.rb_node) { + spin_unlock(&ubi->wl_lock); + break; + } + + pe = rb_entry(rb_first(&ubi->prot.aec), + struct ubi_wl_prot_entry, rb_aec); + + if (pe->abs_ec > ubi->abs_ec) { + spin_unlock(&ubi->wl_lock); + break; + } + + dbg_wl("PEB %d protection over, abs_ec %llu, PEB abs_ec %llu", + pe->e->pnum, ubi->abs_ec, pe->abs_ec); + rb_erase(&pe->rb_aec, &ubi->prot.aec); + rb_erase(&pe->rb_pnum, &ubi->prot.pnum); + wl_tree_add(pe->e, &ubi->used); + spin_unlock(&ubi->wl_lock); + + kfree(pe); + cond_resched(); + } +} + +/** + * schedule_ubi_work - schedule a work. + * @ubi: UBI device description object + * @wrk: the work to schedule + * + * This function enqueues a work defined by @wrk to the tail of the pending + * works list. + */ +static void schedule_ubi_work(struct ubi_device *ubi, struct ubi_work *wrk) +{ + spin_lock(&ubi->wl_lock); + list_add_tail(&wrk->list, &ubi->works); + ubi_assert(ubi->works_count >= 0); + ubi->works_count += 1; + if (ubi->thread_enabled) + wake_up_process(ubi->bgt_thread); + spin_unlock(&ubi->wl_lock); +} + +static int erase_worker(struct ubi_device *ubi, struct ubi_work *wl_wrk, + int cancel); + +/** + * schedule_erase - schedule an erase work. + * @ubi: UBI device description object + * @e: the WL entry of the physical eraseblock to erase + * @torture: if the physical eraseblock has to be tortured + * + * This function returns zero in case of success and a %-ENOMEM in case of + * failure. + */ +static int schedule_erase(struct ubi_device *ubi, struct ubi_wl_entry *e, + int torture) +{ + struct ubi_work *wl_wrk; + + dbg_wl("schedule erasure of PEB %d, EC %d, torture %d", + e->pnum, e->ec, torture); + + wl_wrk = kmalloc(sizeof(struct ubi_work), GFP_NOFS); + if (!wl_wrk) + return -ENOMEM; + + wl_wrk->func = &erase_worker; + wl_wrk->e = e; + wl_wrk->torture = torture; + + schedule_ubi_work(ubi, wl_wrk); + return 0; +} + +/** + * wear_leveling_worker - wear-leveling worker function. + * @ubi: UBI device description object + * @wrk: the work object + * @cancel: non-zero if the worker has to free memory and exit + * + * This function copies a more worn out physical eraseblock to a less worn out + * one. Returns zero in case of success and a negative error code in case of + * failure. + */ +static int wear_leveling_worker(struct ubi_device *ubi, struct ubi_work *wrk, + int cancel) +{ + int err, put = 0, scrubbing = 0, protect = 0; + struct ubi_wl_prot_entry *uninitialized_var(pe); + struct ubi_wl_entry *e1, *e2; + struct ubi_vid_hdr *vid_hdr; + + kfree(wrk); + + if (cancel) + return 0; + + vid_hdr = ubi_zalloc_vid_hdr(ubi, GFP_NOFS); + if (!vid_hdr) + return -ENOMEM; + + mutex_lock(&ubi->move_mutex); + spin_lock(&ubi->wl_lock); + ubi_assert(!ubi->move_from && !ubi->move_to); + ubi_assert(!ubi->move_to_put); + + if (!ubi->free.rb_node || + (!ubi->used.rb_node && !ubi->scrub.rb_node)) { + /* + * No free physical eraseblocks? Well, they must be waiting in + * the queue to be erased. Cancel movement - it will be + * triggered again when a free physical eraseblock appears. + * + * No used physical eraseblocks? They must be temporarily + * protected from being moved. They will be moved to the + * @ubi->used tree later and the wear-leveling will be + * triggered again. + */ + dbg_wl("cancel WL, a list is empty: free %d, used %d", + !ubi->free.rb_node, !ubi->used.rb_node); + goto out_cancel; + } + + if (!ubi->scrub.rb_node) { + /* + * Now pick the least worn-out used physical eraseblock and a + * highly worn-out free physical eraseblock. If the erase + * counters differ much enough, start wear-leveling. + */ + e1 = rb_entry(rb_first(&ubi->used), struct ubi_wl_entry, rb); + e2 = find_wl_entry(&ubi->free, WL_FREE_MAX_DIFF); + + if (!(e2->ec - e1->ec >= UBI_WL_THRESHOLD)) { + dbg_wl("no WL needed: min used EC %d, max free EC %d", + e1->ec, e2->ec); + goto out_cancel; + } + paranoid_check_in_wl_tree(e1, &ubi->used); + rb_erase(&e1->rb, &ubi->used); + dbg_wl("move PEB %d EC %d to PEB %d EC %d", + e1->pnum, e1->ec, e2->pnum, e2->ec); + } else { + /* Perform scrubbing */ + scrubbing = 1; + e1 = rb_entry(rb_first(&ubi->scrub), struct ubi_wl_entry, rb); + e2 = find_wl_entry(&ubi->free, WL_FREE_MAX_DIFF); + paranoid_check_in_wl_tree(e1, &ubi->scrub); + rb_erase(&e1->rb, &ubi->scrub); + dbg_wl("scrub PEB %d to PEB %d", e1->pnum, e2->pnum); + } + + paranoid_check_in_wl_tree(e2, &ubi->free); + rb_erase(&e2->rb, &ubi->free); + ubi->move_from = e1; + ubi->move_to = e2; + spin_unlock(&ubi->wl_lock); + + /* + * Now we are going to copy physical eraseblock @e1->pnum to @e2->pnum. + * We so far do not know which logical eraseblock our physical + * eraseblock (@e1) belongs to. We have to read the volume identifier + * header first. + * + * Note, we are protected from this PEB being unmapped and erased. The + * 'ubi_wl_put_peb()' would wait for moving to be finished if the PEB + * which is being moved was unmapped. + */ + + err = ubi_io_read_vid_hdr(ubi, e1->pnum, vid_hdr, 0); + if (err && err != UBI_IO_BITFLIPS) { + if (err == UBI_IO_PEB_FREE) { + /* + * We are trying to move PEB without a VID header. UBI + * always write VID headers shortly after the PEB was + * given, so we have a situation when it did not have + * chance to write it down because it was preempted. + * Just re-schedule the work, so that next time it will + * likely have the VID header in place. + */ + dbg_wl("PEB %d has no VID header", e1->pnum); + goto out_not_moved; + } + + ubi_err("error %d while reading VID header from PEB %d", + err, e1->pnum); + if (err > 0) + err = -EIO; + goto out_error; + } + + err = ubi_eba_copy_leb(ubi, e1->pnum, e2->pnum, vid_hdr); + if (err) { + + if (err < 0) + goto out_error; + if (err == 1) + goto out_not_moved; + + /* + * For some reason the LEB was not moved - it might be because + * the volume is being deleted. We should prevent this PEB from + * being selected for wear-levelling movement for some "time", + * so put it to the protection tree. + */ + + dbg_wl("cancelled moving PEB %d", e1->pnum); + pe = kmalloc(sizeof(struct ubi_wl_prot_entry), GFP_NOFS); + if (!pe) { + err = -ENOMEM; + goto out_error; + } + + protect = 1; + } + + ubi_free_vid_hdr(ubi, vid_hdr); + spin_lock(&ubi->wl_lock); + if (protect) + prot_tree_add(ubi, e1, pe, protect); + if (!ubi->move_to_put) + wl_tree_add(e2, &ubi->used); + else + put = 1; + ubi->move_from = ubi->move_to = NULL; + ubi->move_to_put = ubi->wl_scheduled = 0; + spin_unlock(&ubi->wl_lock); + + if (put) { + /* + * Well, the target PEB was put meanwhile, schedule it for + * erasure. + */ + dbg_wl("PEB %d was put meanwhile, erase", e2->pnum); + err = schedule_erase(ubi, e2, 0); + if (err) + goto out_error; + } + + if (!protect) { + err = schedule_erase(ubi, e1, 0); + if (err) + goto out_error; + } + + + dbg_wl("done"); + mutex_unlock(&ubi->move_mutex); + return 0; + + /* + * For some reasons the LEB was not moved, might be an error, might be + * something else. @e1 was not changed, so return it back. @e2 might + * be changed, schedule it for erasure. + */ +out_not_moved: + ubi_free_vid_hdr(ubi, vid_hdr); + spin_lock(&ubi->wl_lock); + if (scrubbing) + wl_tree_add(e1, &ubi->scrub); + else + wl_tree_add(e1, &ubi->used); + ubi->move_from = ubi->move_to = NULL; + ubi->move_to_put = ubi->wl_scheduled = 0; + spin_unlock(&ubi->wl_lock); + + err = schedule_erase(ubi, e2, 0); + if (err) + goto out_error; + + mutex_unlock(&ubi->move_mutex); + return 0; + +out_error: + ubi_err("error %d while moving PEB %d to PEB %d", + err, e1->pnum, e2->pnum); + + ubi_free_vid_hdr(ubi, vid_hdr); + spin_lock(&ubi->wl_lock); + ubi->move_from = ubi->move_to = NULL; + ubi->move_to_put = ubi->wl_scheduled = 0; + spin_unlock(&ubi->wl_lock); + + kmem_cache_free(ubi_wl_entry_slab, e1); + kmem_cache_free(ubi_wl_entry_slab, e2); + ubi_ro_mode(ubi); + + mutex_unlock(&ubi->move_mutex); + return err; + +out_cancel: + ubi->wl_scheduled = 0; + spin_unlock(&ubi->wl_lock); + mutex_unlock(&ubi->move_mutex); + ubi_free_vid_hdr(ubi, vid_hdr); + return 0; +} + +/** + * ensure_wear_leveling - schedule wear-leveling if it is needed. + * @ubi: UBI device description object + * + * This function checks if it is time to start wear-leveling and schedules it + * if yes. This function returns zero in case of success and a negative error + * code in case of failure. + */ +static int ensure_wear_leveling(struct ubi_device *ubi) +{ + int err = 0; + struct ubi_wl_entry *e1; + struct ubi_wl_entry *e2; + struct ubi_work *wrk; + + spin_lock(&ubi->wl_lock); + if (ubi->wl_scheduled) + /* Wear-leveling is already in the work queue */ + goto out_unlock; + + /* + * If the ubi->scrub tree is not empty, scrubbing is needed, and the + * the WL worker has to be scheduled anyway. + */ + if (!ubi->scrub.rb_node) { + if (!ubi->used.rb_node || !ubi->free.rb_node) + /* No physical eraseblocks - no deal */ + goto out_unlock; + + /* + * We schedule wear-leveling only if the difference between the + * lowest erase counter of used physical eraseblocks and a high + * erase counter of free physical eraseblocks is greater then + * %UBI_WL_THRESHOLD. + */ + e1 = rb_entry(rb_first(&ubi->used), struct ubi_wl_entry, rb); + e2 = find_wl_entry(&ubi->free, WL_FREE_MAX_DIFF); + + if (!(e2->ec - e1->ec >= UBI_WL_THRESHOLD)) + goto out_unlock; + dbg_wl("schedule wear-leveling"); + } else + dbg_wl("schedule scrubbing"); + + ubi->wl_scheduled = 1; + spin_unlock(&ubi->wl_lock); + + wrk = kmalloc(sizeof(struct ubi_work), GFP_NOFS); + if (!wrk) { + err = -ENOMEM; + goto out_cancel; + } + + wrk->func = &wear_leveling_worker; + schedule_ubi_work(ubi, wrk); + return err; + +out_cancel: + spin_lock(&ubi->wl_lock); + ubi->wl_scheduled = 0; +out_unlock: + spin_unlock(&ubi->wl_lock); + return err; +} + +/** + * erase_worker - physical eraseblock erase worker function. + * @ubi: UBI device description object + * @wl_wrk: the work object + * @cancel: non-zero if the worker has to free memory and exit + * + * This function erases a physical eraseblock and perform torture testing if + * needed. It also takes care about marking the physical eraseblock bad if + * needed. Returns zero in case of success and a negative error code in case of + * failure. + */ +static int erase_worker(struct ubi_device *ubi, struct ubi_work *wl_wrk, + int cancel) +{ + struct ubi_wl_entry *e = wl_wrk->e; + int pnum = e->pnum, err, need; + + if (cancel) { + dbg_wl("cancel erasure of PEB %d EC %d", pnum, e->ec); + kfree(wl_wrk); + kmem_cache_free(ubi_wl_entry_slab, e); + return 0; + } + + dbg_wl("erase PEB %d EC %d", pnum, e->ec); + + err = sync_erase(ubi, e, wl_wrk->torture); + if (!err) { + /* Fine, we've erased it successfully */ + kfree(wl_wrk); + + spin_lock(&ubi->wl_lock); + ubi->abs_ec += 1; + wl_tree_add(e, &ubi->free); + spin_unlock(&ubi->wl_lock); + + /* + * One more erase operation has happened, take care about protected + * physical eraseblocks. + */ + check_protection_over(ubi); + + /* And take care about wear-leveling */ + err = ensure_wear_leveling(ubi); + return err; + } + + ubi_err("failed to erase PEB %d, error %d", pnum, err); + kfree(wl_wrk); + kmem_cache_free(ubi_wl_entry_slab, e); + + if (err == -EINTR || err == -ENOMEM || err == -EAGAIN || + err == -EBUSY) { + int err1; + + /* Re-schedule the LEB for erasure */ + err1 = schedule_erase(ubi, e, 0); + if (err1) { + err = err1; + goto out_ro; + } + return err; + } else if (err != -EIO) { + /* + * If this is not %-EIO, we have no idea what to do. Scheduling + * this physical eraseblock for erasure again would cause + * errors again and again. Well, lets switch to RO mode. + */ + goto out_ro; + } + + /* It is %-EIO, the PEB went bad */ + + if (!ubi->bad_allowed) { + ubi_err("bad physical eraseblock %d detected", pnum); + goto out_ro; + } + + spin_lock(&ubi->volumes_lock); + need = ubi->beb_rsvd_level - ubi->beb_rsvd_pebs + 1; + if (need > 0) { + need = ubi->avail_pebs >= need ? need : ubi->avail_pebs; + ubi->avail_pebs -= need; + ubi->rsvd_pebs += need; + ubi->beb_rsvd_pebs += need; + if (need > 0) + ubi_msg("reserve more %d PEBs", need); + } + + if (ubi->beb_rsvd_pebs == 0) { + spin_unlock(&ubi->volumes_lock); + ubi_err("no reserved physical eraseblocks"); + goto out_ro; + } + + spin_unlock(&ubi->volumes_lock); + ubi_msg("mark PEB %d as bad", pnum); + + err = ubi_io_mark_bad(ubi, pnum); + if (err) + goto out_ro; + + spin_lock(&ubi->volumes_lock); + ubi->beb_rsvd_pebs -= 1; + ubi->bad_peb_count += 1; + ubi->good_peb_count -= 1; + ubi_calculate_reserved(ubi); + if (ubi->beb_rsvd_pebs == 0) + ubi_warn("last PEB from the reserved pool was used"); + spin_unlock(&ubi->volumes_lock); + + return err; + +out_ro: + ubi_ro_mode(ubi); + return err; +} + +/** + * ubi_wl_put_peb - return a physical eraseblock to the wear-leveling unit. + * @ubi: UBI device description object + * @pnum: physical eraseblock to return + * @torture: if this physical eraseblock has to be tortured + * + * This function is called to return physical eraseblock @pnum to the pool of + * free physical eraseblocks. The @torture flag has to be set if an I/O error + * occurred to this @pnum and it has to be tested. This function returns zero + * in case of success, and a negative error code in case of failure. + */ +int ubi_wl_put_peb(struct ubi_device *ubi, int pnum, int torture) +{ + int err; + struct ubi_wl_entry *e; + + dbg_wl("PEB %d", pnum); + ubi_assert(pnum >= 0); + ubi_assert(pnum < ubi->peb_count); + +retry: + spin_lock(&ubi->wl_lock); + e = ubi->lookuptbl[pnum]; + if (e == ubi->move_from) { + /* + * User is putting the physical eraseblock which was selected to + * be moved. It will be scheduled for erasure in the + * wear-leveling worker. + */ + dbg_wl("PEB %d is being moved, wait", pnum); + spin_unlock(&ubi->wl_lock); + + /* Wait for the WL worker by taking the @ubi->move_mutex */ + mutex_lock(&ubi->move_mutex); + mutex_unlock(&ubi->move_mutex); + goto retry; + } else if (e == ubi->move_to) { + /* + * User is putting the physical eraseblock which was selected + * as the target the data is moved to. It may happen if the EBA + * unit already re-mapped the LEB in 'ubi_eba_copy_leb()' but + * the WL unit has not put the PEB to the "used" tree yet, but + * it is about to do this. So we just set a flag which will + * tell the WL worker that the PEB is not needed anymore and + * should be scheduled for erasure. + */ + dbg_wl("PEB %d is the target of data moving", pnum); + ubi_assert(!ubi->move_to_put); + ubi->move_to_put = 1; + spin_unlock(&ubi->wl_lock); + return 0; + } else { + if (in_wl_tree(e, &ubi->used)) { + paranoid_check_in_wl_tree(e, &ubi->used); + rb_erase(&e->rb, &ubi->used); + } else if (in_wl_tree(e, &ubi->scrub)) { + paranoid_check_in_wl_tree(e, &ubi->scrub); + rb_erase(&e->rb, &ubi->scrub); + } else { + err = prot_tree_del(ubi, e->pnum); + if (err) { + ubi_err("PEB %d not found", pnum); + ubi_ro_mode(ubi); + spin_unlock(&ubi->wl_lock); + return err; + } + } + } + spin_unlock(&ubi->wl_lock); + + err = schedule_erase(ubi, e, torture); + if (err) { + spin_lock(&ubi->wl_lock); + wl_tree_add(e, &ubi->used); + spin_unlock(&ubi->wl_lock); + } + + return err; +} + +/** + * ubi_wl_scrub_peb - schedule a physical eraseblock for scrubbing. + * @ubi: UBI device description object + * @pnum: the physical eraseblock to schedule + * + * If a bit-flip in a physical eraseblock is detected, this physical eraseblock + * needs scrubbing. This function schedules a physical eraseblock for + * scrubbing which is done in background. This function returns zero in case of + * success and a negative error code in case of failure. + */ +int ubi_wl_scrub_peb(struct ubi_device *ubi, int pnum) +{ + struct ubi_wl_entry *e; + + ubi_msg("schedule PEB %d for scrubbing", pnum); + +retry: + spin_lock(&ubi->wl_lock); + e = ubi->lookuptbl[pnum]; + if (e == ubi->move_from || in_wl_tree(e, &ubi->scrub)) { + spin_unlock(&ubi->wl_lock); + return 0; + } + + if (e == ubi->move_to) { + /* + * This physical eraseblock was used to move data to. The data + * was moved but the PEB was not yet inserted to the proper + * tree. We should just wait a little and let the WL worker + * proceed. + */ + spin_unlock(&ubi->wl_lock); + dbg_wl("the PEB %d is not in proper tree, retry", pnum); + yield(); + goto retry; + } + + if (in_wl_tree(e, &ubi->used)) { + paranoid_check_in_wl_tree(e, &ubi->used); + rb_erase(&e->rb, &ubi->used); + } else { + int err; + + err = prot_tree_del(ubi, e->pnum); + if (err) { + ubi_err("PEB %d not found", pnum); + ubi_ro_mode(ubi); + spin_unlock(&ubi->wl_lock); + return err; + } + } + + wl_tree_add(e, &ubi->scrub); + spin_unlock(&ubi->wl_lock); + + /* + * Technically scrubbing is the same as wear-leveling, so it is done + * by the WL worker. + */ + return ensure_wear_leveling(ubi); +} + +/** + * ubi_wl_flush - flush all pending works. + * @ubi: UBI device description object + * + * This function returns zero in case of success and a negative error code in + * case of failure. + */ +int ubi_wl_flush(struct ubi_device *ubi) +{ + int err; + + /* + * Erase while the pending works queue is not empty, but not more then + * the number of currently pending works. + */ + dbg_wl("flush (%d pending works)", ubi->works_count); + while (ubi->works_count) { + err = do_work(ubi); + if (err) + return err; + } + + /* + * Make sure all the works which have been done in parallel are + * finished. + */ + down_write(&ubi->work_sem); + up_write(&ubi->work_sem); + + /* + * And in case last was the WL worker and it cancelled the LEB + * movement, flush again. + */ + while (ubi->works_count) { + dbg_wl("flush more (%d pending works)", ubi->works_count); + err = do_work(ubi); + if (err) + return err; + } + + return 0; +} + +/** + * tree_destroy - destroy an RB-tree. + * @root: the root of the tree to destroy + */ +static void tree_destroy(struct rb_root *root) +{ + struct rb_node *rb; + struct ubi_wl_entry *e; + + rb = root->rb_node; + while (rb) { + if (rb->rb_left) + rb = rb->rb_left; + else if (rb->rb_right) + rb = rb->rb_right; + else { + e = rb_entry(rb, struct ubi_wl_entry, rb); + + rb = rb_parent(rb); + if (rb) { + if (rb->rb_left == &e->rb) + rb->rb_left = NULL; + else + rb->rb_right = NULL; + } + + kmem_cache_free(ubi_wl_entry_slab, e); + } + } +} + +/** + * ubi_thread - UBI background thread. + * @u: the UBI device description object pointer + */ +int ubi_thread(void *u) +{ + int failures = 0; + struct ubi_device *ubi = u; + + ubi_msg("background thread \"%s\" started, PID %d", + ubi->bgt_name, task_pid_nr(current)); + + set_freezable(); + for (;;) { + int err; + + if (kthread_should_stop()) + break; + + if (try_to_freeze()) + continue; + + spin_lock(&ubi->wl_lock); + if (list_empty(&ubi->works) || ubi->ro_mode || + !ubi->thread_enabled) { + set_current_state(TASK_INTERRUPTIBLE); + spin_unlock(&ubi->wl_lock); + schedule(); + continue; + } + spin_unlock(&ubi->wl_lock); + + err = do_work(ubi); + if (err) { + ubi_err("%s: work failed with error code %d", + ubi->bgt_name, err); + if (failures++ > WL_MAX_FAILURES) { + /* + * Too many failures, disable the thread and + * switch to read-only mode. + */ + ubi_msg("%s: %d consecutive failures", + ubi->bgt_name, WL_MAX_FAILURES); + ubi_ro_mode(ubi); + break; + } + } else + failures = 0; + + cond_resched(); + } + + dbg_wl("background thread \"%s\" is killed", ubi->bgt_name); + return 0; +} + +/** + * cancel_pending - cancel all pending works. + * @ubi: UBI device description object + */ +static void cancel_pending(struct ubi_device *ubi) +{ + while (!list_empty(&ubi->works)) { + struct ubi_work *wrk; + + wrk = list_entry(ubi->works.next, struct ubi_work, list); + list_del(&wrk->list); + wrk->func(ubi, wrk, 1); + ubi->works_count -= 1; + ubi_assert(ubi->works_count >= 0); + } +} + +/** + * ubi_wl_init_scan - initialize the wear-leveling unit using scanning + * information. + * @ubi: UBI device description object + * @si: scanning information + * + * This function returns zero in case of success, and a negative error code in + * case of failure. + */ +int ubi_wl_init_scan(struct ubi_device *ubi, struct ubi_scan_info *si) +{ + int err; + struct rb_node *rb1, *rb2; + struct ubi_scan_volume *sv; + struct ubi_scan_leb *seb, *tmp; + struct ubi_wl_entry *e; + + + ubi->used = ubi->free = ubi->scrub = RB_ROOT; + ubi->prot.pnum = ubi->prot.aec = RB_ROOT; + spin_lock_init(&ubi->wl_lock); + mutex_init(&ubi->move_mutex); + init_rwsem(&ubi->work_sem); + ubi->max_ec = si->max_ec; + INIT_LIST_HEAD(&ubi->works); + + sprintf(ubi->bgt_name, UBI_BGT_NAME_PATTERN, ubi->ubi_num); + + err = -ENOMEM; + ubi->lookuptbl = kzalloc(ubi->peb_count * sizeof(void *), GFP_KERNEL); + if (!ubi->lookuptbl) + return err; + + list_for_each_entry_safe(seb, tmp, &si->erase, u.list) { + cond_resched(); + + e = kmem_cache_alloc(ubi_wl_entry_slab, GFP_KERNEL); + if (!e) + goto out_free; + + e->pnum = seb->pnum; + e->ec = seb->ec; + ubi->lookuptbl[e->pnum] = e; + if (schedule_erase(ubi, e, 0)) { + kmem_cache_free(ubi_wl_entry_slab, e); + goto out_free; + } + } + + list_for_each_entry(seb, &si->free, u.list) { + cond_resched(); + + e = kmem_cache_alloc(ubi_wl_entry_slab, GFP_KERNEL); + if (!e) + goto out_free; + + e->pnum = seb->pnum; + e->ec = seb->ec; + ubi_assert(e->ec >= 0); + wl_tree_add(e, &ubi->free); + ubi->lookuptbl[e->pnum] = e; + } + + list_for_each_entry(seb, &si->corr, u.list) { + cond_resched(); + + e = kmem_cache_alloc(ubi_wl_entry_slab, GFP_KERNEL); + if (!e) + goto out_free; + + e->pnum = seb->pnum; + e->ec = seb->ec; + ubi->lookuptbl[e->pnum] = e; + if (schedule_erase(ubi, e, 0)) { + kmem_cache_free(ubi_wl_entry_slab, e); + goto out_free; + } + } + + ubi_rb_for_each_entry(rb1, sv, &si->volumes, rb) { + ubi_rb_for_each_entry(rb2, seb, &sv->root, u.rb) { + cond_resched(); + + e = kmem_cache_alloc(ubi_wl_entry_slab, GFP_KERNEL); + if (!e) + goto out_free; + + e->pnum = seb->pnum; + e->ec = seb->ec; + ubi->lookuptbl[e->pnum] = e; + if (!seb->scrub) { + dbg_wl("add PEB %d EC %d to the used tree", + e->pnum, e->ec); + wl_tree_add(e, &ubi->used); + } else { + dbg_wl("add PEB %d EC %d to the scrub tree", + e->pnum, e->ec); + wl_tree_add(e, &ubi->scrub); + } + } + } + + if (ubi->avail_pebs < WL_RESERVED_PEBS) { + ubi_err("no enough physical eraseblocks (%d, need %d)", + ubi->avail_pebs, WL_RESERVED_PEBS); + goto out_free; + } + ubi->avail_pebs -= WL_RESERVED_PEBS; + ubi->rsvd_pebs += WL_RESERVED_PEBS; + + /* Schedule wear-leveling if needed */ + err = ensure_wear_leveling(ubi); + if (err) + goto out_free; + + return 0; + +out_free: + cancel_pending(ubi); + tree_destroy(&ubi->used); + tree_destroy(&ubi->free); + tree_destroy(&ubi->scrub); + kfree(ubi->lookuptbl); + return err; +} + +/** + * protection_trees_destroy - destroy the protection RB-trees. + * @ubi: UBI device description object + */ +static void protection_trees_destroy(struct ubi_device *ubi) +{ + struct rb_node *rb; + struct ubi_wl_prot_entry *pe; + + rb = ubi->prot.aec.rb_node; + while (rb) { + if (rb->rb_left) + rb = rb->rb_left; + else if (rb->rb_right) + rb = rb->rb_right; + else { + pe = rb_entry(rb, struct ubi_wl_prot_entry, rb_aec); + + rb = rb_parent(rb); + if (rb) { + if (rb->rb_left == &pe->rb_aec) + rb->rb_left = NULL; + else + rb->rb_right = NULL; + } + + kmem_cache_free(ubi_wl_entry_slab, pe->e); + kfree(pe); + } + } +} + +/** + * ubi_wl_close - close the wear-leveling unit. + * @ubi: UBI device description object + */ +void ubi_wl_close(struct ubi_device *ubi) +{ + dbg_wl("close the UBI wear-leveling unit"); + + cancel_pending(ubi); + protection_trees_destroy(ubi); + tree_destroy(&ubi->used); + tree_destroy(&ubi->free); + tree_destroy(&ubi->scrub); + kfree(ubi->lookuptbl); +} + +#ifdef CONFIG_MTD_UBI_DEBUG_PARANOID + +/** + * paranoid_check_ec - make sure that the erase counter of a physical eraseblock + * is correct. + * @ubi: UBI device description object + * @pnum: the physical eraseblock number to check + * @ec: the erase counter to check + * + * This function returns zero if the erase counter of physical eraseblock @pnum + * is equivalent to @ec, %1 if not, and a negative error code if an error + * occurred. + */ +static int paranoid_check_ec(struct ubi_device *ubi, int pnum, int ec) +{ + int err; + long long read_ec; + struct ubi_ec_hdr *ec_hdr; + + ec_hdr = kzalloc(ubi->ec_hdr_alsize, GFP_NOFS); + if (!ec_hdr) + return -ENOMEM; + + err = ubi_io_read_ec_hdr(ubi, pnum, ec_hdr, 0); + if (err && err != UBI_IO_BITFLIPS) { + /* The header does not have to exist */ + err = 0; + goto out_free; + } + + read_ec = be64_to_cpu(ec_hdr->ec); + if (ec != read_ec) { + ubi_err("paranoid check failed for PEB %d", pnum); + ubi_err("read EC is %lld, should be %d", read_ec, ec); + ubi_dbg_dump_stack(); + err = 1; + } else + err = 0; + +out_free: + kfree(ec_hdr); + return err; +} + +/** + * paranoid_check_in_wl_tree - make sure that a wear-leveling entry is present + * in a WL RB-tree. + * @e: the wear-leveling entry to check + * @root: the root of the tree + * + * This function returns zero if @e is in the @root RB-tree and %1 if it + * is not. + */ +static int paranoid_check_in_wl_tree(struct ubi_wl_entry *e, + struct rb_root *root) +{ + if (in_wl_tree(e, root)) + return 0; + + ubi_err("paranoid check failed for PEB %d, EC %d, RB-tree %p ", + e->pnum, e->ec, root); + ubi_dbg_dump_stack(); + return 1; +} + +#endif /* CONFIG_MTD_UBI_DEBUG_PARANOID */ diff --git a/include/linux/crc32.h b/include/linux/crc32.h new file mode 100644 index 0000000..e133157 --- /dev/null +++ b/include/linux/crc32.h @@ -0,0 +1,27 @@ +/* + * crc32.h + * See linux/lib/crc32.c for license and changes + */ +#ifndef _LINUX_CRC32_H +#define _LINUX_CRC32_H + +#include <linux/types.h> +//#include <linux/bitrev.h> + +extern u32 crc32_le(u32 crc, unsigned char const *p, size_t len); +//extern u32 crc32_be(u32 crc, unsigned char const *p, size_t len); + +#define crc32(seed, data, length) crc32_le(seed, (unsigned char const *)data, length) + +/* + * Helpers for hash table generation of ethernet nics: + * + * Ethernet sends the least significant bit of a byte first, thus crc32_le + * is used. The output of crc32_le is bit reversed [most significant bit + * is in bit nr 0], thus it must be reversed before use. Except for + * nics that bit swap the result internally... + */ +//#define ether_crc(length, data) bitrev32(crc32_le(~0, data, length)) +//#define ether_crc_le(length, data) crc32_le(~0, data, length) + +#endif /* _LINUX_CRC32_H */ diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h index 55d33dd..337e734 100644 --- a/include/linux/mtd/mtd.h +++ b/include/linux/mtd/mtd.h @@ -249,6 +249,7 @@ int default_mtd_readv(struct mtd_info *mtd, struct kvec *vecs, unsigned long count, loff_t from, size_t *retlen); #endif +#define CONFIG_MTD_PARTITIONS #ifdef CONFIG_MTD_PARTITIONS void mtd_erase_callback(struct erase_info *instr); #else diff --git a/include/linux/mtd/partitions.h b/include/linux/mtd/partitions.h new file mode 100644 index 0000000..b41e5f5 --- /dev/null +++ b/include/linux/mtd/partitions.h @@ -0,0 +1,84 @@ +/* + * MTD partitioning layer definitions + * + * (C) 2000 Nicolas Pitre <nico(a)cam.org> + * + * This code is GPL + * + * $Id: partitions.h,v 1.17 2005/11/07 11:14:55 gleixner Exp $ + */ + +#ifndef MTD_PARTITIONS_H +#define MTD_PARTITIONS_H + +#include <linux/types.h> + + +/* + * Partition definition structure: + * + * An array of struct partition is passed along with a MTD object to + * add_mtd_partitions() to create them. + * + * For each partition, these fields are available: + * name: string that will be used to label the partition's MTD device. + * size: the partition size; if defined as MTDPART_SIZ_FULL, the partition + * will extend to the end of the master MTD device. + * offset: absolute starting position within the master MTD device; if + * defined as MTDPART_OFS_APPEND, the partition will start where the + * previous one ended; if MTDPART_OFS_NXTBLK, at the next erase block. + * mask_flags: contains flags that have to be masked (removed) from the + * master MTD flag set for the corresponding MTD partition. + * For example, to force a read-only partition, simply adding + * MTD_WRITEABLE to the mask_flags will do the trick. + * + * Note: writeable partitions require their size and offset be + * erasesize aligned (e.g. use MTDPART_OFS_NEXTBLK). + */ + +struct mtd_partition { + char *name; /* identifier string */ + u_int32_t size; /* partition size */ + u_int32_t offset; /* offset within the master MTD space */ + u_int32_t mask_flags; /* master MTD flags to mask out for this partition */ + struct nand_ecclayout *ecclayout; /* out of band layout for this partition (NAND only)*/ + struct mtd_info **mtdp; /* pointer to store the MTD object */ +}; + +#define MTDPART_OFS_NXTBLK (-2) +#define MTDPART_OFS_APPEND (-1) +#define MTDPART_SIZ_FULL (0) + + +int add_mtd_partitions(struct mtd_info *, const struct mtd_partition *, int); +int del_mtd_partitions(struct mtd_info *); + +#if 0 +/* + * Functions dealing with the various ways of partitioning the space + */ + +struct mtd_part_parser { + struct list_head list; + struct module *owner; + const char *name; + int (*parse_fn)(struct mtd_info *, struct mtd_partition **, unsigned long); +}; + +extern int register_mtd_parser(struct mtd_part_parser *parser); +extern int deregister_mtd_parser(struct mtd_part_parser *parser); +extern int parse_mtd_partitions(struct mtd_info *master, const char **types, + struct mtd_partition **pparts, unsigned long origin); + +#define put_partition_parser(p) do { module_put((p)->owner); } while(0) + +struct device; +struct device_node; + +int __devinit of_mtd_parse_partitions(struct device *dev, + struct mtd_info *mtd, + struct device_node *node, + struct mtd_partition **pparts); +#endif + +#endif diff --git a/include/linux/mtd/ubi.h b/include/linux/mtd/ubi.h new file mode 100644 index 0000000..a017891 --- /dev/null +++ b/include/linux/mtd/ubi.h @@ -0,0 +1,186 @@ +/* + * Copyright (c) International Business Machines Corp., 2006 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Author: Artem Bityutskiy (Битюцкий Артём) + */ + +#ifndef __LINUX_UBI_H__ +#define __LINUX_UBI_H__ + +//#include <asm/ioctl.h> +#include <linux/types.h> +#include <mtd/ubi-user.h> + +/* + * enum ubi_open_mode - UBI volume open mode constants. + * + * UBI_READONLY: read-only mode + * UBI_READWRITE: read-write mode + * UBI_EXCLUSIVE: exclusive mode + */ +enum { + UBI_READONLY = 1, + UBI_READWRITE, + UBI_EXCLUSIVE +}; + +/** + * struct ubi_volume_info - UBI volume description data structure. + * @vol_id: volume ID + * @ubi_num: UBI device number this volume belongs to + * @size: how many physical eraseblocks are reserved for this volume + * @used_bytes: how many bytes of data this volume contains + * @used_ebs: how many physical eraseblocks of this volume actually contain any + * data + * @vol_type: volume type (%UBI_DYNAMIC_VOLUME or %UBI_STATIC_VOLUME) + * @corrupted: non-zero if the volume is corrupted (static volumes only) + * @upd_marker: non-zero if the volume has update marker set + * @alignment: volume alignment + * @usable_leb_size: how many bytes are available in logical eraseblocks of + * this volume + * @name_len: volume name length + * @name: volume name + * @cdev: UBI volume character device major and minor numbers + * + * The @corrupted flag is only relevant to static volumes and is always zero + * for dynamic ones. This is because UBI does not care about dynamic volume + * data protection and only cares about protecting static volume data. + * + * The @upd_marker flag is set if the volume update operation was interrupted. + * Before touching the volume data during the update operation, UBI first sets + * the update marker flag for this volume. If the volume update operation was + * further interrupted, the update marker indicates this. If the update marker + * is set, the contents of the volume is certainly damaged and a new volume + * update operation has to be started. + * + * To put it differently, @corrupted and @upd_marker fields have different + * semantics: + * o the @corrupted flag means that this static volume is corrupted for some + * reasons, but not because an interrupted volume update + * o the @upd_marker field means that the volume is damaged because of an + * interrupted update operation. + * + * I.e., the @corrupted flag is never set if the @upd_marker flag is set. + * + * The @used_bytes and @used_ebs fields are only really needed for static + * volumes and contain the number of bytes stored in this static volume and how + * many eraseblock this data occupies. In case of dynamic volumes, the + * @used_bytes field is equivalent to @size*@usable_leb_size, and the @used_ebs + * field is equivalent to @size. + * + * In general, logical eraseblock size is a property of the UBI device, not + * of the UBI volume. Indeed, the logical eraseblock size depends on the + * physical eraseblock size and on how much bytes UBI headers consume. But + * because of the volume alignment (@alignment), the usable size of logical + * eraseblocks if a volume may be less. The following equation is true: + * @usable_leb_size = LEB size - (LEB size mod @alignment), + * where LEB size is the logical eraseblock size defined by the UBI device. + * + * The alignment is multiple to the minimal flash input/output unit size or %1 + * if all the available space is used. + * + * To put this differently, alignment may be considered is a way to change + * volume logical eraseblock sizes. + */ +struct ubi_volume_info { + int ubi_num; + int vol_id; + int size; + long long used_bytes; + int used_ebs; + int vol_type; + int corrupted; + int upd_marker; + int alignment; + int usable_leb_size; + int name_len; + const char *name; + dev_t cdev; +}; + +/** + * struct ubi_device_info - UBI device description data structure. + * @ubi_num: ubi device number + * @leb_size: logical eraseblock size on this UBI device + * @min_io_size: minimal I/O unit size + * @ro_mode: if this device is in read-only mode + * @cdev: UBI character device major and minor numbers + * + * Note, @leb_size is the logical eraseblock size offered by the UBI device. + * Volumes of this UBI device may have smaller logical eraseblock size if their + * alignment is not equivalent to %1. + */ +struct ubi_device_info { + int ubi_num; + int leb_size; + int min_io_size; + int ro_mode; + dev_t cdev; +}; + +/* UBI descriptor given to users when they open UBI volumes */ +struct ubi_volume_desc; + +int ubi_get_device_info(int ubi_num, struct ubi_device_info *di); +void ubi_get_volume_info(struct ubi_volume_desc *desc, + struct ubi_volume_info *vi); +struct ubi_volume_desc *ubi_open_volume(int ubi_num, int vol_id, int mode); +struct ubi_volume_desc *ubi_open_volume_nm(int ubi_num, const char *name, + int mode); +void ubi_close_volume(struct ubi_volume_desc *desc); +int ubi_leb_read(struct ubi_volume_desc *desc, int lnum, char *buf, int offset, + int len, int check); +int ubi_leb_write(struct ubi_volume_desc *desc, int lnum, const void *buf, + int offset, int len, int dtype); +int ubi_leb_change(struct ubi_volume_desc *desc, int lnum, const void *buf, + int len, int dtype); +int ubi_leb_erase(struct ubi_volume_desc *desc, int lnum); +int ubi_leb_unmap(struct ubi_volume_desc *desc, int lnum); +int ubi_leb_map(struct ubi_volume_desc *desc, int lnum, int dtype); +int ubi_is_mapped(struct ubi_volume_desc *desc, int lnum); + +/* + * This function is the same as the 'ubi_leb_read()' function, but it does not + * provide the checking capability. + */ +static inline int ubi_read(struct ubi_volume_desc *desc, int lnum, char *buf, + int offset, int len) +{ + return ubi_leb_read(desc, lnum, buf, offset, len, 0); +} + +/* + * This function is the same as the 'ubi_leb_write()' functions, but it does + * not have the data type argument. + */ +static inline int ubi_write(struct ubi_volume_desc *desc, int lnum, + const void *buf, int offset, int len) +{ + return ubi_leb_write(desc, lnum, buf, offset, len, UBI_UNKNOWN); +} + +/* + * This function is the same as the 'ubi_leb_change()' functions, but it does + * not have the data type argument. + */ +static inline int ubi_change(struct ubi_volume_desc *desc, int lnum, + const void *buf, int len) +{ + return ubi_leb_change(desc, lnum, buf, len, UBI_UNKNOWN); +} + +#endif /* !__LINUX_UBI_H__ */ diff --git a/include/linux/types.h b/include/linux/types.h index df4808f..1b0b4a4 100644 --- a/include/linux/types.h +++ b/include/linux/types.h @@ -119,6 +119,30 @@ typedef __s64 int64_t; * Below are truly Linux-specific types that should never collide with * any application/library that wants linux/types.h. */ +#ifdef __CHECKER__ +#define __bitwise__ __attribute__((bitwise)) +#else +#define __bitwise__ +#endif +#ifdef __CHECK_ENDIAN__ +#define __bitwise __bitwise__ +#else +#define __bitwise +#endif + +typedef __u16 __bitwise __le16; +typedef __u16 __bitwise __be16; +typedef __u32 __bitwise __le32; +typedef __u32 __bitwise __be32; +#if defined(__GNUC__) +typedef __u64 __bitwise __le64; +typedef __u64 __bitwise __be64; +#endif +typedef __u16 __bitwise __sum16; +typedef __u32 __bitwise __wsum; + + +typedef unsigned __bitwise__ gfp_t; struct ustat { __kernel_daddr_t f_tfree; diff --git a/include/mtd/ubi-header.h b/include/mtd/ubi-header.h new file mode 100644 index 0000000..292f916 --- /dev/null +++ b/include/mtd/ubi-header.h @@ -0,0 +1,372 @@ +/* + * Copyright (c) International Business Machines Corp., 2006 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Authors: Artem Bityutskiy (Битюцкий Артём) + * Thomas Gleixner + * Frank Haverkamp + * Oliver Lohmann + * Andreas Arnez + */ + +/* + * This file defines the layout of UBI headers and all the other UBI on-flash + * data structures. May be included by user-space. + */ + +#ifndef __UBI_HEADER_H__ +#define __UBI_HEADER_H__ + +#include <asm/byteorder.h> + +/* The version of UBI images supported by this implementation */ +#define UBI_VERSION 1 + +/* The highest erase counter value supported by this implementation */ +#define UBI_MAX_ERASECOUNTER 0x7FFFFFFF + +/* The initial CRC32 value used when calculating CRC checksums */ +#define UBI_CRC32_INIT 0xFFFFFFFFU + +/* Erase counter header magic number (ASCII "UBI#") */ +#define UBI_EC_HDR_MAGIC 0x55424923 +/* Volume identifier header magic number (ASCII "UBI!") */ +#define UBI_VID_HDR_MAGIC 0x55424921 + +/* + * Volume type constants used in the volume identifier header. + * + * @UBI_VID_DYNAMIC: dynamic volume + * @UBI_VID_STATIC: static volume + */ +enum { + UBI_VID_DYNAMIC = 1, + UBI_VID_STATIC = 2 +}; + +/* + * Volume flags used in the volume table record. + * + * @UBI_VTBL_AUTORESIZE_FLG: auto-resize this volume + * + * %UBI_VTBL_AUTORESIZE_FLG flag can be set only for one volume in the volume + * table. UBI automatically re-sizes the volume which has this flag and makes + * the volume to be of largest possible size. This means that if after the + * initialization UBI finds out that there are available physical eraseblocks + * present on the device, it automatically appends all of them to the volume + * (the physical eraseblocks reserved for bad eraseblocks handling and other + * reserved physical eraseblocks are not taken). So, if there is a volume with + * the %UBI_VTBL_AUTORESIZE_FLG flag set, the amount of available logical + * eraseblocks will be zero after UBI is loaded, because all of them will be + * reserved for this volume. Note, the %UBI_VTBL_AUTORESIZE_FLG bit is cleared + * after the volume had been initialized. + * + * The auto-resize feature is useful for device production purposes. For + * example, different NAND flash chips may have different amount of initial bad + * eraseblocks, depending of particular chip instance. Manufacturers of NAND + * chips usually guarantee that the amount of initial bad eraseblocks does not + * exceed certain percent, e.g. 2%. When one creates an UBI image which will be + * flashed to the end devices in production, he does not know the exact amount + * of good physical eraseblocks the NAND chip on the device will have, but this + * number is required to calculate the volume sized and put them to the volume + * table of the UBI image. In this case, one of the volumes (e.g., the one + * which will store the root file system) is marked as "auto-resizable", and + * UBI will adjust its size on the first boot if needed. + * + * Note, first UBI reserves some amount of physical eraseblocks for bad + * eraseblock handling, and then re-sizes the volume, not vice-versa. This + * means that the pool of reserved physical eraseblocks will always be present. + */ +enum { + UBI_VTBL_AUTORESIZE_FLG = 0x01, +}; + +/* + * Compatibility constants used by internal volumes. + * + * @UBI_COMPAT_DELETE: delete this internal volume before anything is written + * to the flash + * @UBI_COMPAT_RO: attach this device in read-only mode + * @UBI_COMPAT_PRESERVE: preserve this internal volume - do not touch its + * physical eraseblocks, don't allow the wear-leveling unit to move them + * @UBI_COMPAT_REJECT: reject this UBI image + */ +enum { + UBI_COMPAT_DELETE = 1, + UBI_COMPAT_RO = 2, + UBI_COMPAT_PRESERVE = 4, + UBI_COMPAT_REJECT = 5 +}; + +/* Sizes of UBI headers */ +#define UBI_EC_HDR_SIZE sizeof(struct ubi_ec_hdr) +#define UBI_VID_HDR_SIZE sizeof(struct ubi_vid_hdr) + +/* Sizes of UBI headers without the ending CRC */ +#define UBI_EC_HDR_SIZE_CRC (UBI_EC_HDR_SIZE - sizeof(__be32)) +#define UBI_VID_HDR_SIZE_CRC (UBI_VID_HDR_SIZE - sizeof(__be32)) + +/** + * struct ubi_ec_hdr - UBI erase counter header. + * @magic: erase counter header magic number (%UBI_EC_HDR_MAGIC) + * @version: version of UBI implementation which is supposed to accept this + * UBI image + * @padding1: reserved for future, zeroes + * @ec: the erase counter + * @vid_hdr_offset: where the VID header starts + * @data_offset: where the user data start + * @padding2: reserved for future, zeroes + * @hdr_crc: erase counter header CRC checksum + * + * The erase counter header takes 64 bytes and has a plenty of unused space for + * future usage. The unused fields are zeroed. The @version field is used to + * indicate the version of UBI implementation which is supposed to be able to + * work with this UBI image. If @version is greater then the current UBI + * version, the image is rejected. This may be useful in future if something + * is changed radically. This field is duplicated in the volume identifier + * header. + * + * The @vid_hdr_offset and @data_offset fields contain the offset of the the + * volume identifier header and user data, relative to the beginning of the + * physical eraseblock. These values have to be the same for all physical + * eraseblocks. + */ +struct ubi_ec_hdr { + __be32 magic; + __u8 version; + __u8 padding1[3]; + __be64 ec; /* Warning: the current limit is 31-bit anyway! */ + __be32 vid_hdr_offset; + __be32 data_offset; + __u8 padding2[36]; + __be32 hdr_crc; +} __attribute__ ((packed)); + +/** + * struct ubi_vid_hdr - on-flash UBI volume identifier header. + * @magic: volume identifier header magic number (%UBI_VID_HDR_MAGIC) + * @version: UBI implementation version which is supposed to accept this UBI + * image (%UBI_VERSION) + * @vol_type: volume type (%UBI_VID_DYNAMIC or %UBI_VID_STATIC) + * @copy_flag: if this logical eraseblock was copied from another physical + * eraseblock (for wear-leveling reasons) + * @compat: compatibility of this volume (%0, %UBI_COMPAT_DELETE, + * %UBI_COMPAT_IGNORE, %UBI_COMPAT_PRESERVE, or %UBI_COMPAT_REJECT) + * @vol_id: ID of this volume + * @lnum: logical eraseblock number + * @leb_ver: version of this logical eraseblock (IMPORTANT: obsolete, to be + * removed, kept only for not breaking older UBI users) + * @data_size: how many bytes of data this logical eraseblock contains + * @used_ebs: total number of used logical eraseblocks in this volume + * @data_pad: how many bytes at the end of this physical eraseblock are not + * used + * @data_crc: CRC checksum of the data stored in this logical eraseblock + * @padding1: reserved for future, zeroes + * @sqnum: sequence number + * @padding2: reserved for future, zeroes + * @hdr_crc: volume identifier header CRC checksum + * + * The @sqnum is the value of the global sequence counter at the time when this + * VID header was created. The global sequence counter is incremented each time + * UBI writes a new VID header to the flash, i.e. when it maps a logical + * eraseblock to a new physical eraseblock. The global sequence counter is an + * unsigned 64-bit integer and we assume it never overflows. The @sqnum + * (sequence number) is used to distinguish between older and newer versions of + * logical eraseblocks. + * + * There are 2 situations when there may be more then one physical eraseblock + * corresponding to the same logical eraseblock, i.e., having the same @vol_id + * and @lnum values in the volume identifier header. Suppose we have a logical + * eraseblock L and it is mapped to the physical eraseblock P. + * + * 1. Because UBI may erase physical eraseblocks asynchronously, the following + * situation is possible: L is asynchronously erased, so P is scheduled for + * erasure, then L is written to,i.e. mapped to another physical eraseblock P1, + * so P1 is written to, then an unclean reboot happens. Result - there are 2 + * physical eraseblocks P and P1 corresponding to the same logical eraseblock + * L. But P1 has greater sequence number, so UBI picks P1 when it attaches the + * flash. + * + * 2. From time to time UBI moves logical eraseblocks to other physical + * eraseblocks for wear-leveling reasons. If, for example, UBI moves L from P + * to P1, and an unclean reboot happens before P is physically erased, there + * are two physical eraseblocks P and P1 corresponding to L and UBI has to + * select one of them when the flash is attached. The @sqnum field says which + * PEB is the original (obviously P will have lower @sqnum) and the copy. But + * it is not enough to select the physical eraseblock with the higher sequence + * number, because the unclean reboot could have happen in the middle of the + * copying process, so the data in P is corrupted. It is also not enough to + * just select the physical eraseblock with lower sequence number, because the + * data there may be old (consider a case if more data was added to P1 after + * the copying). Moreover, the unclean reboot may happen when the erasure of P + * was just started, so it result in unstable P, which is "mostly" OK, but + * still has unstable bits. + * + * UBI uses the @copy_flag field to indicate that this logical eraseblock is a + * copy. UBI also calculates data CRC when the data is moved and stores it at + * the @data_crc field of the copy (P1). So when UBI needs to pick one physical + * eraseblock of two (P or P1), the @copy_flag of the newer one (P1) is + * examined. If it is cleared, the situation* is simple and the newer one is + * picked. If it is set, the data CRC of the copy (P1) is examined. If the CRC + * checksum is correct, this physical eraseblock is selected (P1). Otherwise + * the older one (P) is selected. + * + * Note, there is an obsolete @leb_ver field which was used instead of @sqnum + * in the past. But it is not used anymore and we keep it in order to be able + * to deal with old UBI images. It will be removed at some point. + * + * There are 2 sorts of volumes in UBI: user volumes and internal volumes. + * Internal volumes are not seen from outside and are used for various internal + * UBI purposes. In this implementation there is only one internal volume - the + * layout volume. Internal volumes are the main mechanism of UBI extensions. + * For example, in future one may introduce a journal internal volume. Internal + * volumes have their own reserved range of IDs. + * + * The @compat field is only used for internal volumes and contains the "degree + * of their compatibility". It is always zero for user volumes. This field + * provides a mechanism to introduce UBI extensions and to be still compatible + * with older UBI binaries. For example, if someone introduced a journal in + * future, he would probably use %UBI_COMPAT_DELETE compatibility for the + * journal volume. And in this case, older UBI binaries, which know nothing + * about the journal volume, would just delete this volume and work perfectly + * fine. This is similar to what Ext2fs does when it is fed by an Ext3fs image + * - it just ignores the Ext3fs journal. + * + * The @data_crc field contains the CRC checksum of the contents of the logical + * eraseblock if this is a static volume. In case of dynamic volumes, it does + * not contain the CRC checksum as a rule. The only exception is when the + * data of the physical eraseblock was moved by the wear-leveling unit, then + * the wear-leveling unit calculates the data CRC and stores it in the + * @data_crc field. And of course, the @copy_flag is %in this case. + * + * The @data_size field is used only for static volumes because UBI has to know + * how many bytes of data are stored in this eraseblock. For dynamic volumes, + * this field usually contains zero. The only exception is when the data of the + * physical eraseblock was moved to another physical eraseblock for + * wear-leveling reasons. In this case, UBI calculates CRC checksum of the + * contents and uses both @data_crc and @data_size fields. In this case, the + * @data_size field contains data size. + * + * The @used_ebs field is used only for static volumes and indicates how many + * eraseblocks the data of the volume takes. For dynamic volumes this field is + * not used and always contains zero. + * + * The @data_pad is calculated when volumes are created using the alignment + * parameter. So, effectively, the @data_pad field reduces the size of logical + * eraseblocks of this volume. This is very handy when one uses block-oriented + * software (say, cramfs) on top of the UBI volume. + */ +struct ubi_vid_hdr { + __be32 magic; + __u8 version; + __u8 vol_type; + __u8 copy_flag; + __u8 compat; + __be32 vol_id; + __be32 lnum; + __be32 leb_ver; /* obsolete, to be removed, don't use */ + __be32 data_size; + __be32 used_ebs; + __be32 data_pad; + __be32 data_crc; + __u8 padding1[4]; + __be64 sqnum; + __u8 padding2[12]; + __be32 hdr_crc; +} __attribute__ ((packed)); + +/* Internal UBI volumes count */ +#define UBI_INT_VOL_COUNT 1 + +/* + * Starting ID of internal volumes. There is reserved room for 4096 internal + * volumes. + */ +#define UBI_INTERNAL_VOL_START (0x7FFFFFFF - 4096) + +/* The layout volume contains the volume table */ + +#define UBI_LAYOUT_VOLUME_ID UBI_INTERNAL_VOL_START +#define UBI_LAYOUT_VOLUME_TYPE UBI_VID_DYNAMIC +#define UBI_LAYOUT_VOLUME_ALIGN 1 +#define UBI_LAYOUT_VOLUME_EBS 2 +#define UBI_LAYOUT_VOLUME_NAME "layout volume" +#define UBI_LAYOUT_VOLUME_COMPAT UBI_COMPAT_REJECT + +/* The maximum number of volumes per one UBI device */ +#define UBI_MAX_VOLUMES 128 + +/* The maximum volume name length */ +#define UBI_VOL_NAME_MAX 127 + +/* Size of the volume table record */ +#define UBI_VTBL_RECORD_SIZE sizeof(struct ubi_vtbl_record) + +/* Size of the volume table record without the ending CRC */ +#define UBI_VTBL_RECORD_SIZE_CRC (UBI_VTBL_RECORD_SIZE - sizeof(__be32)) + +/** + * struct ubi_vtbl_record - a record in the volume table. + * @reserved_pebs: how many physical eraseblocks are reserved for this volume + * @alignment: volume alignment + * @data_pad: how many bytes are unused at the end of the each physical + * eraseblock to satisfy the requested alignment + * @vol_type: volume type (%UBI_DYNAMIC_VOLUME or %UBI_STATIC_VOLUME) + * @upd_marker: if volume update was started but not finished + * @name_len: volume name length + * @name: the volume name + * @flags: volume flags (%UBI_VTBL_AUTORESIZE_FLG) + * @padding: reserved, zeroes + * @crc: a CRC32 checksum of the record + * + * The volume table records are stored in the volume table, which is stored in + * the layout volume. The layout volume consists of 2 logical eraseblock, each + * of which contains a copy of the volume table (i.e., the volume table is + * duplicated). The volume table is an array of &struct ubi_vtbl_record + * objects indexed by the volume ID. + * + * If the size of the logical eraseblock is large enough to fit + * %UBI_MAX_VOLUMES records, the volume table contains %UBI_MAX_VOLUMES + * records. Otherwise, it contains as many records as it can fit (i.e., size of + * logical eraseblock divided by sizeof(struct ubi_vtbl_record)). + * + * The @upd_marker flag is used to implement volume update. It is set to %1 + * before update and set to %0 after the update. So if the update operation was + * interrupted, UBI knows that the volume is corrupted. + * + * The @alignment field is specified when the volume is created and cannot be + * later changed. It may be useful, for example, when a block-oriented file + * system works on top of UBI. The @data_pad field is calculated using the + * logical eraseblock size and @alignment. The alignment must be multiple to the + * minimal flash I/O unit. If @alignment is 1, all the available space of + * the physical eraseblocks is used. + * + * Empty records contain all zeroes and the CRC checksum of those zeroes. + */ +struct ubi_vtbl_record { + __be32 reserved_pebs; + __be32 alignment; + __be32 data_pad; + __u8 vol_type; + __u8 upd_marker; + __be16 name_len; + __u8 name[UBI_VOL_NAME_MAX+1]; + __u8 flags; + __u8 padding[23]; + __be32 crc; +} __attribute__ ((packed)); + +#endif /* !__UBI_HEADER_H__ */ diff --git a/include/mtd/ubi-user.h b/include/mtd/ubi-user.h new file mode 100644 index 0000000..a7421f1 --- /dev/null +++ b/include/mtd/ubi-user.h @@ -0,0 +1,268 @@ +/* + * Copyright (c) International Business Machines Corp., 2006 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Author: Artem Bityutskiy (Битюцкий Артём) + */ + +#ifndef __UBI_USER_H__ +#define __UBI_USER_H__ + +/* + * UBI device creation (the same as MTD device attachment) + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * MTD devices may be attached using %UBI_IOCATT ioctl command of the UBI + * control device. The caller has to properly fill and pass + * &struct ubi_attach_req object - UBI will attach the MTD device specified in + * the request and return the newly created UBI device number as the ioctl + * return value. + * + * UBI device deletion (the same as MTD device detachment) + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * An UBI device maybe deleted with %UBI_IOCDET ioctl command of the UBI + * control device. + * + * UBI volume creation + * ~~~~~~~~~~~~~~~~~~~ + * + * UBI volumes are created via the %UBI_IOCMKVOL IOCTL command of UBI character + * device. A &struct ubi_mkvol_req object has to be properly filled and a + * pointer to it has to be passed to the IOCTL. + * + * UBI volume deletion + * ~~~~~~~~~~~~~~~~~~~ + * + * To delete a volume, the %UBI_IOCRMVOL IOCTL command of the UBI character + * device should be used. A pointer to the 32-bit volume ID hast to be passed + * to the IOCTL. + * + * UBI volume re-size + * ~~~~~~~~~~~~~~~~~~ + * + * To re-size a volume, the %UBI_IOCRSVOL IOCTL command of the UBI character + * device should be used. A &struct ubi_rsvol_req object has to be properly + * filled and a pointer to it has to be passed to the IOCTL. + * + * UBI volume update + * ~~~~~~~~~~~~~~~~~ + * + * Volume update should be done via the %UBI_IOCVOLUP IOCTL command of the + * corresponding UBI volume character device. A pointer to a 64-bit update + * size should be passed to the IOCTL. After this, UBI expects user to write + * this number of bytes to the volume character device. The update is finished + * when the claimed number of bytes is passed. So, the volume update sequence + * is something like: + * + * fd = open("/dev/my_volume"); + * ioctl(fd, UBI_IOCVOLUP, &image_size); + * write(fd, buf, image_size); + * close(fd); + * + * Atomic eraseblock change + * ~~~~~~~~~~~~~~~~~~~~~~~~ + * + * Atomic eraseblock change operation is done via the %UBI_IOCEBCH IOCTL + * command of the corresponding UBI volume character device. A pointer to + * &struct ubi_leb_change_req has to be passed to the IOCTL. Then the user is + * expected to write the requested amount of bytes. This is similar to the + * "volume update" IOCTL. + */ + +/* + * When a new UBI volume or UBI device is created, users may either specify the + * volume/device number they want to create or to let UBI automatically assign + * the number using these constants. + */ +#define UBI_VOL_NUM_AUTO (-1) +#define UBI_DEV_NUM_AUTO (-1) + +/* Maximum volume name length */ +#define UBI_MAX_VOLUME_NAME 127 + +/* IOCTL commands of UBI character devices */ + +#define UBI_IOC_MAGIC 'o' + +/* Create an UBI volume */ +#define UBI_IOCMKVOL _IOW(UBI_IOC_MAGIC, 0, struct ubi_mkvol_req) +/* Remove an UBI volume */ +#define UBI_IOCRMVOL _IOW(UBI_IOC_MAGIC, 1, int32_t) +/* Re-size an UBI volume */ +#define UBI_IOCRSVOL _IOW(UBI_IOC_MAGIC, 2, struct ubi_rsvol_req) + +/* IOCTL commands of the UBI control character device */ + +#define UBI_CTRL_IOC_MAGIC 'o' + +/* Attach an MTD device */ +#define UBI_IOCATT _IOW(UBI_CTRL_IOC_MAGIC, 64, struct ubi_attach_req) +/* Detach an MTD device */ +#define UBI_IOCDET _IOW(UBI_CTRL_IOC_MAGIC, 65, int32_t) + +/* IOCTL commands of UBI volume character devices */ + +#define UBI_VOL_IOC_MAGIC 'O' + +/* Start UBI volume update */ +#define UBI_IOCVOLUP _IOW(UBI_VOL_IOC_MAGIC, 0, int64_t) +/* An eraseblock erasure command, used for debugging, disabled by default */ +#define UBI_IOCEBER _IOW(UBI_VOL_IOC_MAGIC, 1, int32_t) +/* An atomic eraseblock change command */ +#define UBI_IOCEBCH _IOW(UBI_VOL_IOC_MAGIC, 2, int32_t) + +/* Maximum MTD device name length supported by UBI */ +#define MAX_UBI_MTD_NAME_LEN 127 + +/* + * UBI data type hint constants. + * + * UBI_LONGTERM: long-term data + * UBI_SHORTTERM: short-term data + * UBI_UNKNOWN: data persistence is unknown + * + * These constants are used when data is written to UBI volumes in order to + * help the UBI wear-leveling unit to find more appropriate physical + * eraseblocks. + */ +enum { + UBI_LONGTERM = 1, + UBI_SHORTTERM = 2, + UBI_UNKNOWN = 3, +}; + +/* + * UBI volume type constants. + * + * @UBI_DYNAMIC_VOLUME: dynamic volume + * @UBI_STATIC_VOLUME: static volume + */ +enum { + UBI_DYNAMIC_VOLUME = 3, + UBI_STATIC_VOLUME = 4, +}; + +/** + * struct ubi_attach_req - attach MTD device request. + * @ubi_num: UBI device number to create + * @mtd_num: MTD device number to attach + * @vid_hdr_offset: VID header offset (use defaults if %0) + * @padding: reserved for future, not used, has to be zeroed + * + * This data structure is used to specify MTD device UBI has to attach and the + * parameters it has to use. The number which should be assigned to the new UBI + * device is passed in @ubi_num. UBI may automatically assign the number if + * @UBI_DEV_NUM_AUTO is passed. In this case, the device number is returned in + * @ubi_num. + * + * Most applications should pass %0 in @vid_hdr_offset to make UBI use default + * offset of the VID header within physical eraseblocks. The default offset is + * the next min. I/O unit after the EC header. For example, it will be offset + * 512 in case of a 512 bytes page NAND flash with no sub-page support. Or + * it will be 512 in case of a 2KiB page NAND flash with 4 512-byte sub-pages. + * + * But in rare cases, if this optimizes things, the VID header may be placed to + * a different offset. For example, the boot-loader might do things faster if the + * VID header sits at the end of the first 2KiB NAND page with 4 sub-pages. As + * the boot-loader would not normally need to read EC headers (unless it needs + * UBI in RW mode), it might be faster to calculate ECC. This is weird example, + * but it real-life example. So, in this example, @vid_hdr_offer would be + * 2KiB-64 bytes = 1984. Note, that this position is not even 512-bytes + * aligned, which is OK, as UBI is clever enough to realize this is 4th sub-page + * of the first page and add needed padding. + */ +struct ubi_attach_req { + int32_t ubi_num; + int32_t mtd_num; + int32_t vid_hdr_offset; + uint8_t padding[12]; +}; + +/** + * struct ubi_mkvol_req - volume description data structure used in + * volume creation requests. + * @vol_id: volume number + * @alignment: volume alignment + * @bytes: volume size in bytes + * @vol_type: volume type (%UBI_DYNAMIC_VOLUME or %UBI_STATIC_VOLUME) + * @padding1: reserved for future, not used, has to be zeroed + * @name_len: volume name length + * @padding2: reserved for future, not used, has to be zeroed + * @name: volume name + * + * This structure is used by user-space programs when creating new volumes. The + * @used_bytes field is only necessary when creating static volumes. + * + * The @alignment field specifies the required alignment of the volume logical + * eraseblock. This means, that the size of logical eraseblocks will be aligned + * to this number, i.e., + * (UBI device logical eraseblock size) mod (@alignment) = 0. + * + * To put it differently, the logical eraseblock of this volume may be slightly + * shortened in order to make it properly aligned. The alignment has to be + * multiple of the flash minimal input/output unit, or %1 to utilize the entire + * available space of logical eraseblocks. + * + * The @alignment field may be useful, for example, when one wants to maintain + * a block device on top of an UBI volume. In this case, it is desirable to fit + * an integer number of blocks in logical eraseblocks of this UBI volume. With + * alignment it is possible to update this volume using plane UBI volume image + * BLOBs, without caring about how to properly align them. + */ +struct ubi_mkvol_req { + int32_t vol_id; + int32_t alignment; + int64_t bytes; + int8_t vol_type; + int8_t padding1; + int16_t name_len; + int8_t padding2[4]; + char name[UBI_MAX_VOLUME_NAME + 1]; +} __attribute__ ((packed)); + +/** + * struct ubi_rsvol_req - a data structure used in volume re-size requests. + * @vol_id: ID of the volume to re-size + * @bytes: new size of the volume in bytes + * + * Re-sizing is possible for both dynamic and static volumes. But while dynamic + * volumes may be re-sized arbitrarily, static volumes cannot be made to be + * smaller then the number of bytes they bear. To arbitrarily shrink a static + * volume, it must be wiped out first (by means of volume update operation with + * zero number of bytes). + */ +struct ubi_rsvol_req { + int64_t bytes; + int32_t vol_id; +} __attribute__ ((packed)); + +/** + * struct ubi_leb_change_req - a data structure used in atomic logical + * eraseblock change requests. + * @lnum: logical eraseblock number to change + * @bytes: how many bytes will be written to the logical eraseblock + * @dtype: data type (%UBI_LONGTERM, %UBI_SHORTTERM, %UBI_UNKNOWN) + * @padding: reserved for future, not used, has to be zeroed + */ +struct ubi_leb_change_req { + int32_t lnum; + int32_t bytes; + uint8_t dtype; + uint8_t padding[7]; +} __attribute__ ((packed)); + +#endif /* __UBI_USER_H__ */ diff --git a/include/ubi_uboot.h b/include/ubi_uboot.h new file mode 100644 index 0000000..add853f --- /dev/null +++ b/include/ubi_uboot.h @@ -0,0 +1,209 @@ +/* + * Header file for UBI support for U-Boot + * + * Adaptation from kernel to U-Boot + * + * Copyright (C) 2005-2007 Samsung Electronics + * Kyungmin Park <kyungmin.park(a)samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __UBOOT_UBI_H +#define __UBOOT_UBI_H + +#include <common.h> +#include <malloc.h> +#include <div64.h> +#include <linux/crc32.h> +#include <linux/mtd/mtd.h> + +#ifdef CONFIG_CMD_ONENAND +#include <onenand_uboot.h> +#endif + +#include <asm/errno.h> + +#define DPRINTK(format, args...) \ +do { \ + printf("%s[%d]: " format "\n", __func__, __LINE__, ##args); \ +} while (0) + +/* configurable */ +#define CONFIG_MTD_UBI_WL_THRESHOLD 4096 +#define CONFIG_MTD_UBI_BEB_RESERVE 1 +#define UBI_IO_DEBUG 0 + +//#define CONFIG_MTD_UBI_DEBUG +//#define CONFIG_MTD_UBI_DEBUG_PARANOID + +#define CONFIG_MTD_UBI_DEBUG_DISABLE_BGT +//#define CONFIG_MTD_UBI_DEBUG_MSG +//#define CONFIG_MTD_UBI_DEBUG_MSG_EBA +//#define CONFIG_MTD_UBI_DEBUG_MSG_WL +//#define CONFIG_MTD_UBI_DEBUG_MSG_IO +//#define CONFIG_MTD_UBI_DEBUG_MSG_BLD + +/* compiler options */ +#define uninitialized_var(x) x = x + +/* build.c */ +#define get_device(...) +#define put_device(...) +#define ubi_sysfs_init(...) 0 +#define ubi_sysfs_close(...) do { } while (0) +static inline int is_power_of_2(unsigned long n) +{ + return (n != 0 && ((n & (n - 1)) == 0)); +} + +/* FIXME */ +#define MKDEV(...) 0 +#define MAJOR(dev) 0 +#define MINOR(dev) 0 + +#define alloc_chrdev_region(...) 0 +#define unregister_chrdev_region(...) + +#define class_create(...) __builtin_return_address(0) +#define class_create_file(...) 0 +#define class_remove_file(...) +#define class_destroy(...) +#define misc_register(...) 0 +#define misc_deregister(...) + + +/* vmt.c */ +#define device_register(...) 0 +#define volume_sysfs_init(...) 0 +#define volume_sysfs_close(...) do { } while (0) + +/* kapi.c */ + +/* eba.c */ + +/* io.c */ +#define init_waitqueue_head(...) do { } while (0) +#define wait_event_interruptible(...) 0 +#define wake_up_interruptible(...) do { } while (0) +#define print_hex_dump(...) do { } while (0) +#define dump_stack(...) do { } while (0) + +/* wl.c */ +#define task_pid_nr(x) 0 +#define set_freezable(...) do { } while (0) +#define try_to_freeze(...) 0 +#define set_current_state(...) do { } while (0) +#define kthread_should_stop(...) 0 +#define schedule() do { } while (0) + +/* upd.c */ +#define copy_from_user(dest, src, count) ({ \ + int __ret = 0; \ + memcpy(dest, src, count); \ + __ret; \ +}) + +/* common */ +typedef int spinlock_t; +typedef int wait_queue_head_t; +#define spin_lock_init(...) +#define spin_lock(...) +#define spin_unlock(...) + +#define mutex_init(...) +#define mutex_lock(...) +#define mutex_unlock(...) + +#define init_rwsem(...) do { } while (0) +#define down_read(...) do { } while (0) +#define down_write(...) do { } while (0) +#define down_write_trylock(...) 0 +#define up_read(...) do { } while (0) +#define up_write(...) do { } while (0) + +struct kmem_cache { int i; }; +#define kmem_cache_create(...) 1 +#define kmem_cache_alloc(obj, gfp) malloc(sizeof(struct ubi_wl_entry)) +#define kmem_cache_free(obj, size) free(size) +#define kmem_cache_destroy(...) + +#define cond_resched() do { } while (0) +#define yield() do { } while (0) + +#define KERN_WARNING +#define KERN_ERR +#define KERN_NOTICE +#define KERN_DEBUG + +#define GFP_KERNEL 0 +#define GFP_NOFS 1 + +#define __user +#define __init +#define __exit + +#define kthread_create(...) __builtin_return_address(0) +#define kthread_stop(...) do { } while (0) +#define wake_up_process(...) do { } while (0) + +struct rw_semaphore { int i; }; +struct device { + struct device *parent; + struct class *class; + dev_t devt; + int bus_id[20]; + void (*release)(struct device *dev); +}; +struct mutex { int i; }; +struct kernel_param { int i; }; + +struct cdev { + int owner; + dev_t dev; +}; +#define cdev_init(...) do { } while (0) +#define cdev_add(...) 0 +#define cdev_del(...) do { } while (0) + +#define MAX_ERRNO 4095 +#define IS_ERR_VALUE(x) ((x) >= (unsigned long)-MAX_ERRNO) + +static inline void *ERR_PTR(long error) +{ + return (void *) error; +} + +static inline long PTR_ERR(const void *ptr) +{ + return (long) ptr; +} + +static inline long IS_ERR(const void *ptr) +{ + return IS_ERR_VALUE((unsigned long)ptr); +} + +/* Force a compilation error if condition is true */ +#define BUILD_BUG_ON(condition) ((void)sizeof(char[1 - 2*!!(condition)])) + +/* module */ +#define THIS_MODULE 0 +#define try_module_get(...) 0 +#define module_put(...) do { } while (0) +#define module_init(...) +#define module_exit(...) +#define EXPORT_SYMBOL(...) +#define EXPORT_SYMBOL_GPL(...) +#define module_param_call(...) +#define MODULE_PARM_DESC(...) +#define MODULE_VERSION(...) +#define MODULE_DESCRIPTION(...) +#define MODULE_AUTHOR(...) +#define MODULE_LICENSE(...) + +#include "../drivers/mtd/ubi/ubi.h" + +#endif -- 1.5.3.3

1 0

[U-Boot] [PATCH v2] 85xx: properly document MPC85xx_PORDEVSR2_SEC_CFG
by Timur Tabi 21 Oct '08

21 Oct '08

Commit f7d190b1 corrected the value of MPC85xx_PORDEVSR2_SEC_CFG, but forgot to add a comment that the correct value disagrees with the 8544 reference manual. The changelog for that commit is also wrong, as it says "bit 28" when it should be "bit 24". Signed-off-by: Timur Tabi <timur(a)freescale.com> --- include/asm-ppc/immap_85xx.h | 1 + 1 files changed, 1 insertions(+), 0 deletions(-) diff --git a/include/asm-ppc/immap_85xx.h b/include/asm-ppc/immap_85xx.h index 6c81c39..d717bd8 100644 --- a/include/asm-ppc/immap_85xx.h +++ b/include/asm-ppc/immap_85xx.h @@ -1579,6 +1579,7 @@ typedef struct ccsr_gur { #define MPC85xx_PORDEVSR_RIO_DEV_ID 0x00000007 uint pordbgmsr; /* 0xe0010 - POR debug mode status register */ uint pordevsr2; /* 0xe0014 - POR I/O device status regsiter 2 */ +/* The 8544 RM says this is bit 26, but it's really bit 24 */ #define MPC85xx_PORDEVSR2_SEC_CFG 0x00000080 char res1[8]; uint gpporcr; /* 0xe0020 - General-purpose POR configuration register */ -- 1.5.5

2 1

[U-Boot] [USB] pull request
by Markus Klotzbücher 21 Oct '08

21 Oct '08

The following changes since commit 87b4ef560cf2da4ccc9e59711ad1ff7fafe96670: Wolfgang Denk (1): Coding style cleanup; update CHANEGLOG are available in the git repository at: git://git.denx.de/u-boot-usb master Nobuhiro Iwamatsu (1): usb: Fix compile warning of r8a66597-hcd Remy Bohmer (5): Fix for USB sticks not working on ARM while using GCC 4.x compilers Refactoring parts of the common USB OHCI code USB layer of U-Boot causes USB protocol errors while using USB memory sticks fix USB initialisation procedure The PIPE_INTERRUPT flag is used wrong board/MAI/AmigaOneG3SE/usb_uhci.c | 2 +- board/mpl/common/usb_uhci.c | 2 +- common/usb.c | 687 +++++++++++++++----------- cpu/arm920t/s3c24x0/usb_ohci.c | 8 +- cpu/leon3/usb_uhci.c | 2 +- cpu/mips/au1x00_usb_ohci.c | 9 +- cpu/mpc5xxx/usb_ohci.c | 8 +- cpu/ppc4xx/usb_ohci.c | 8 +- drivers/usb/isp116x-hcd.c | 4 +- drivers/usb/r8a66597-hcd.c | 6 +- drivers/usb/usb_ohci.c | 972 ++++++++++++++++++++----------------- drivers/usb/usb_ohci.h | 35 ++ include/usb.h | 16 +- 13 files changed, 986 insertions(+), 773 deletions(-) Regards Markus -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office(a)denx.de")

2 1

[U-Boot] [UBI] git pull request
by Kyungmin Park 21 Oct '08

21 Oct '08

Hi, Now you can use the latest UBI u-boot tree at http://git.denx.de/?p=u-boot/u-boot-ubi.git;a=summary It has minor cleanup after previous post and provides the reference usage using apollon board which has OneNAND. Makefile | 1 board/apollon/Makefile | 4 board/apollon/ubi.c | 55 + common/Makefile | 1 common/cmd_ubi.c | 535 +++++++++++++ drivers/mtd/Makefile | 1 drivers/mtd/mtdcore.c | 142 +++ drivers/mtd/mtdpart.c | 531 +++++++++++++ drivers/mtd/ubi/Makefile | 48 + drivers/mtd/ubi/build.c | 1182 ++++++++++++++++++++++++++++ drivers/mtd/ubi/crc32.c | 514 ++++++++++++ drivers/mtd/ubi/crc32defs.h | 32 + drivers/mtd/ubi/crc32table.h | 136 +++ drivers/mtd/ubi/debug.c | 192 +++++ drivers/mtd/ubi/debug.h | 152 ++++ drivers/mtd/ubi/eba.c | 1256 ++++++++++++++++++++++++++++++ drivers/mtd/ubi/io.c | 1274 +++++++++++++++++++++++++++++++ drivers/mtd/ubi/kapi.c | 638 +++++++++++++++ drivers/mtd/ubi/misc.c | 106 +++ drivers/mtd/ubi/scan.c | 1361 +++++++++++++++++++++++++++++++++ drivers/mtd/ubi/scan.h | 165 ++++ drivers/mtd/ubi/ubi-media.h | 372 +++++++++ drivers/mtd/ubi/ubi.h | 641 +++++++++++++++ drivers/mtd/ubi/upd.c | 441 +++++++++++ drivers/mtd/ubi/vmt.c | 862 +++++++++++++++++++++ drivers/mtd/ubi/vtbl.c | 837 ++++++++++++++++++++ drivers/mtd/ubi/wl.c | 1670 ++++++++++++++++++++++++++++++++++++++++ include/configs/apollon.h | 27 + include/linux/crc32.h | 27 + include/linux/mtd/mtd.h | 1 include/linux/mtd/partitions.h | 84 ++ include/linux/mtd/ubi.h | 186 ++++ include/linux/types.h | 24 + include/mtd/ubi-header.h | 372 +++++++++ include/mtd/ubi-user.h | 268 ++++++ include/ubi_uboot.h | 209 +++++ 36 files changed, 14343 insertions(+), 4 deletions(-) Thank you, Kyungmin Park

2 4

← Newer
1
...
26
27
28
29
30
31
32
...
60
Older →

Jump to page: