December 2022 - U-Boot

[PATCH] ARM: imx: Reinstate decode ECSPI env location from i.MX8M ROMAPI tables
by Marek Vasut 31 Jan '23

31 Jan '23

Decode ECSPI boot device in env_get_location() from i.MX8M ROMAPI tables. This is necessary to correctly identify env is in SPI NOR when the system boots from SPI NOR attached to ECSPI. This reinstates change from commit: e26d0152d61 ("ARM: imx: Decode ECSPI env location from i.MX8M ROMAPI tables") which has been dropped in commit: b0a284a7c94 ("imx: move get_boot_device to common file") Fixes: b0a284a7c94 ("imx: move get_boot_device to common file") Signed-off-by: Marek Vasut <marex(a)denx.de> --- Cc: Fabio Estevam <festevam(a)denx.de> Cc: Peng Fan <peng.fan(a)nxp.com> Cc: Stefano Babic <sbabic(a)denx.de> --- arch/arm/mach-imx/romapi.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm/mach-imx/romapi.c b/arch/arm/mach-imx/romapi.c index c8accdb04db..b49e7f80a28 100644 --- a/arch/arm/mach-imx/romapi.c +++ b/arch/arm/mach-imx/romapi.c @@ -66,6 +66,9 @@ enum boot_device get_boot_device(void) case BT_DEV_TYPE_FLEXSPINOR: boot_dev = QSPI_BOOT; break; + case BT_DEV_TYPE_SPI_NOR: + boot_dev = SPI_NOR_BOOT; + break; case BT_DEV_TYPE_USB: boot_dev = boot_instance + USB_BOOT; break; -- 2.35.1

3 2

[PATCH] imx6qdl-sabresd: Pass mmc alias
by Fabio Estevam 31 Jan '23

31 Jan '23

From: Fabio Estevam <festevam(a)denx.de> Originally, the mmc aliases node was present in imx6qdl-sabresd.dtsi. After the sync with Linux in commit d0399a46e7cd ("imx6dl/imx6qdl: synchronise device trees with linux"), the aliases node is gone as the upstream version does not have it. This causes a regression in which the SD card cannot be found anymore. Fix it by passing the alias node in the u-boot.dtsi file to restore the original behaviour where the SD card (esdhc3) was mapped to mmc1. Fixes: d0399a46e7cd ("imx6dl/imx6qdl: synchronise device trees with linux") Reported-by: Carlos Rafael Giani <dv(a)pseudoterminal.org> Signed-off-by: Fabio Estevam <festevam(a)denx.de> --- arch/arm/dts/imx6qdl-sabresd-u-boot.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/dts/imx6qdl-sabresd-u-boot.dtsi b/arch/arm/dts/imx6qdl-sabresd-u-boot.dtsi index 45f02b19c7ee..cbb856fba3f3 100644 --- a/arch/arm/dts/imx6qdl-sabresd-u-boot.dtsi +++ b/arch/arm/dts/imx6qdl-sabresd-u-boot.dtsi @@ -5,6 +5,12 @@ #include "imx6qdl-u-boot.dtsi" +/ { + aliases { + mmc1 = &usdhc3; + }; +}; + &usdhc3 { u-boot,dm-spl; }; -- 2.25.1

2 1

[PATCH] tools: imx8image: Fix handle leak
by Mikhail Ilin 31 Jan '23

31 Jan '23

The handle "fd" was created in imx8image.c:249 by calling the "fopen" function and is lost in imx8image.c:282. Should close the 'fd' file descriptor before exiting the parse_cfg_file(image_t *param_stack, char *name) function. Fixes: a2b96ece5be1 ("tools: add i.MX8/8X image support") Signed-off-by: Mikhail Ilin <ilin.mikhail.ol(a)gmail.com> --- tools/imx8image.c | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/imx8image.c b/tools/imx8image.c index 01e1486911..395d5c64bd 100644 --- a/tools/imx8image.c +++ b/tools/imx8image.c @@ -279,6 +279,7 @@ static uint32_t parse_cfg_file(image_t *param_stack, char *name) } } + fclose(fd); return 0; } -- 2.17.1

3 2

[PATCH] ARM: imx: Enable LTO for Data Modul i.MX8M Mini eDM SBC
by Marek Vasut 31 Jan '23

31 Jan '23

Enable LTO to reduce the size of SPL. Signed-off-by: Marek Vasut <marex(a)denx.de> --- Cc: Fabio Estevam <festevam(a)gmail.com> Cc: Peng Fan <peng.fan(a)nxp.com> Cc: Stefano Babic <sbabic(a)denx.de> --- configs/imx8mm_data_modul_edm_sbc_defconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/configs/imx8mm_data_modul_edm_sbc_defconfig b/configs/imx8mm_data_modul_edm_sbc_defconfig index 3ccd26817ba..d9821885c3a 100644 --- a/configs/imx8mm_data_modul_edm_sbc_defconfig +++ b/configs/imx8mm_data_modul_edm_sbc_defconfig @@ -24,6 +24,7 @@ CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y CONFIG_ENV_OFFSET_REDUND=0xFFFC0000 CONFIG_IMX_BOOTAUX=y CONFIG_SYS_LOAD_ADDR=0x60000000 +CONFIG_LTO=y CONFIG_ENV_VARS_UBOOT_CONFIG=y CONFIG_SYS_MONITOR_LEN=1048576 CONFIG_FIT=y -- 2.35.1

2 1

[PATCH] tools: imximage: Fix check array index
by Mikhail Ilin 31 Jan '23

31 Jan '23

The struct dcd_v1_t is initialized to MAX_HW_CFG_SIZE_V1 (60) structs 'dcd_type_addr_data_t', so the indexes to use on its elements are [0,59]. But on line 478, the variable 'length' can take on the value 60, which applies to array overflow: cd_v1->addr_data[length].type Thus, it is necessary to tighten the check on the 'size' variable on line 463. Fixes: 0b0c6af38738 ("Prepare v2020.01") Signed-off-by: Mikhail Ilin <ilin.mikhail.ol(a)gmail.com> --- tools/imximage.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/imximage.c b/tools/imximage.c index d7edd3c52f..8d45c917e6 100644 --- a/tools/imximage.c +++ b/tools/imximage.c @@ -460,7 +460,7 @@ static void print_hdr_v1(struct imx_header *imx_hdr) uint32_t size, length, ver; size = dcd_v1->preamble.length; - if (size > (MAX_HW_CFG_SIZE_V1 * sizeof(dcd_type_addr_data_t))) { + if (size >= (MAX_HW_CFG_SIZE_V1 * sizeof(dcd_type_addr_data_t))) { fprintf(stderr, "Error: Image corrupt DCD size %d exceed maximum %d\n", (uint32_t)(size / sizeof(dcd_type_addr_data_t)), -- 2.17.1

2 1

[PATCH] arm: kirkwood: Add nas440 board, Marvell 88SE6121 AHCI
by Hajo Noerenberg 30 Jan '23

30 Jan '23

This adds support for the Seagate Blackarmor NAS440 (4-bay Kirkwood NAS box). Does it make sense to include support for a 10+ year old device? If yes, I would be willing to discuss and finalize this patch. If no, it will be archived here for the public, which is fine with me. For the NAS440 is the something special that hard disk drives 1 and 2 are connected to a 88SE6121 SATA-II controller, which is connected via PCIe. Hard disk drives 3 and 4 are directly connected to the 88F6281 SoC. - Add NAS440 dtb and associated files/configs * Includes support for HD44780 front LCD * Includes support for device LEDs (via 74AHC164 shift register) - Add Marvell 88SE6121 AHCI support. Thanks to Pali Rohár for recently adding the necessary Kirkwood PCIe driver. It works :) - Tested with my NAS440 hardware: ETH/USB/SATA/AHCI-SCSI/GPIO/LCD/LEDs ok As far as I can see this fully implements the support for this board within U-Boot. With the Linux kernel however there are problems, the kernel AHCI driver fails with "failed to IDENTIFY" messages for the 88SE6121 drive ports, which I could not solve yet despite comparison with the GPL sources from Seagate. Note: I am collecting various information and patches for the family of Blackarmor NAS boards at https://github.com/hn/seagate-blackarmor-nas Hajo --- arch/arm/dts/kirkwood-blackarmor-nas440.dts | 166 +++++++++ board/Seagate/nas440/Kconfig | 12 + board/Seagate/nas440/MAINTAINERS | 7 + board/Seagate/nas440/Makefile | 7 + board/Seagate/nas440/kwbimage.cfg | 156 ++++++++ board/Seagate/nas440/nas440.c | 378 ++++++++++++++++++++ configs/nas440_defconfig | 89 +++++ drivers/ata/ahci-pci.c | 1 + include/configs/nas440.h | 50 +++ 9 files changed, 866 insertions(+) create mode 100644 arch/arm/dts/kirkwood-blackarmor-nas440.dts create mode 100644 board/Seagate/nas440/Kconfig create mode 100644 board/Seagate/nas440/MAINTAINERS create mode 100644 board/Seagate/nas440/Makefile create mode 100644 board/Seagate/nas440/kwbimage.cfg create mode 100644 board/Seagate/nas440/nas440.c create mode 100644 configs/nas440_defconfig create mode 100644 include/configs/nas440.h diff --git a/arch/arm/dts/kirkwood-blackarmor-nas440.dts b/arch/arm/dts/kirkwood-blackarmor-nas440.dts new file mode 100644 index 0000000000..60e3fe6f0d --- /dev/null +++ b/arch/arm/dts/kirkwood-blackarmor-nas440.dts @@ -0,0 +1,166 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Device Tree file for Seagate Blackarmor NAS440 + * + * Copyright (C) 2021 Hajo Noerenberg <www.github.com/hn> + * Copyright (C) 2015 Andreas Fischer <af(a)bantuX.org> + * Copyright (C) 2014 Evgeni Dobrev <evgeni(a)studio-punkt.com> + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" + +/ { + model = "Seagate Blackarmor NAS440"; + compatible = "seagate,blackarmor-nas440","marvell,kirkwood-88f6281", + "marvell,kirkwood"; + + memory { /* 256 MB */ + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; + }; + + gpio_poweroff { + compatible = "gpio-poweroff"; + gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; /* GPIO1-16 is MPP48 */ + }; + + gpio_keys { + compatible = "gpio-keys"; + + reset { + label = "Reset"; + linux,code = <KEY_POWER>; + gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; + }; + + button { + label = "Power"; + linux,code = <KEY_SLEEP>; + gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; /* GPIO1-17 is MPP49 */ + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&pmx_power_socsata>; + pinctrl-names = "default"; + + socsata_power: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "SoC SATA Power"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 28 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +/* + * Serial port routed to connector CN4 + * + * pin 1 - TX (CPU's TX) + * pin 4 - RX (CPU's RX) + * pin 6 - GND + */ +&uart0 { + status = "okay"; +}; + +&pinctrl { + pinctrl-0 = <&pmx_button_reset &pmx_button_power>; + pinctrl-names = "default"; + + pmx_act_sata0: pmx-act-sata0 { + marvell,pins = "mpp15"; + marvell,function = "sata0"; + }; + + pmx_act_sata1: pmx-act-sata1 { + marvell,pins = "mpp16"; + marvell,function = "sata1"; + }; + + pmx_power_socsata: pmx-power-socsata { + marvell,pins = "mpp28"; + marvell,function = "gpio"; + }; + + pmx_button_reset: pmx-button-reset { + marvell,pins = "mpp29"; + marvell,function = "gpio"; + }; + + pmx_button_power: pmx-button-power { + marvell,pins = "mpp49"; + marvell,function = "gpio"; + }; +}; + +&sata { + status = "okay"; + nr-ports = <2>; +}; + +&pciec { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + adt7473: thermal@2e { + compatible = "adi,adt7473"; + reg = <0x2e>; + }; +}; + +&nand { + status = "okay"; +}; + +&mdio { + status = "okay"; + + ethphy0: ethernet-phy@8 { + reg = <8>; + }; + ethphy1: ethernet-phy@9 { + reg = <9>; + }; +}; + +&eth0 { + status = "okay"; + + ethernet0-port@0 { + phy-handle = <&ethphy0>; + }; +}; + +&eth1 { + status = "okay"; + + ethernet1-port@0 { + phy-handle = <&ethphy1>; + }; +}; diff --git a/board/Seagate/nas440/Kconfig b/board/Seagate/nas440/Kconfig new file mode 100644 index 0000000000..3f93d75cd4 --- /dev/null +++ b/board/Seagate/nas440/Kconfig @@ -0,0 +1,12 @@ +if TARGET_NAS440 + +config SYS_BOARD + default "nas440" + +config SYS_VENDOR + default "Seagate" + +config SYS_CONFIG_NAME + default "nas440" + +endif diff --git a/board/Seagate/nas440/MAINTAINERS b/board/Seagate/nas440/MAINTAINERS new file mode 100644 index 0000000000..dcea1316c5 --- /dev/null +++ b/board/Seagate/nas440/MAINTAINERS @@ -0,0 +1,7 @@ +NAS440 BOARD +M: Hajo Noerenberg <hajo-uboot(a)noerenberg.de> +S: Maintained +F: board/Seagate/nas440/ +F: include/configs/nas440.h +F: configs/nas440_defconfig +F: arch/arm/dts/kirkwood-blackarmor-nas440.dts diff --git a/board/Seagate/nas440/Makefile b/board/Seagate/nas440/Makefile new file mode 100644 index 0000000000..2a3ef746d3 --- /dev/null +++ b/board/Seagate/nas440/Makefile @@ -0,0 +1,7 @@ +# +# Copyright (C) 2014 Evgeni Dobrev <evgeni(a)studio-punkt.com> +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y := nas440.o diff --git a/board/Seagate/nas440/kwbimage.cfg b/board/Seagate/nas440/kwbimage.cfg new file mode 100644 index 0000000000..e71da11694 --- /dev/null +++ b/board/Seagate/nas440/kwbimage.cfg @@ -0,0 +1,156 @@ +# +# Copyright (C) 2021 Hajo Noerenberg <hajo-uboot(a)noerenberg.de> +# +# Based on nas220/kwbimage.cfg originally written by +# Evgeni Dobrev <evgeni(a)studio-punkt.com> +# +# Based on sheevaplug/kwbimage.cfg originally written by +# Prafulla Wadaskar <prafulla(a)marvell.com> +# (C) Copyright 2009 +# Marvell Semiconductor <www.marvell.com> +# +# SPDX-License-Identifier: GPL-2.0+ +# +# Refer doc/README.kwbimage for more details about how-to configure +# and create kirkwood boot image +# + +# Boot Media configurations +BOOT_FROM nand +NAND_ECC_MODE default +NAND_PAGE_SIZE 0x0200 + +# SOC registers configuration using bootrom header extension +# Maximum KWBIMAGE_MAX_CONFIG configurations allowed + +# Configure RGMII-0 interface pad voltage to 1.8V +DATA 0xFFD100E0 0x1B1B1B9B + +DATA 0xFFD20134 0xBBBBBBBB +DATA 0xFFD20138 0x00BBBBBB + +#Dram initalization for SINGLE x16 CL=5 @ 400MHz +DATA 0xFFD01400 0x43000C30 # DDR Configuration register +# bit13-0: 0xa00 (2560 DDR2 clks refresh rate) +# bit23-14: zero +# bit24: 1= enable exit self refresh mode on DDR access +# bit25: 1 required +# bit29-26: zero +# bit31-30: 01 + +DATA 0xFFD01404 0x39543000 # DDR Controller Control Low +# bit 4: 0=addr/cmd in smame cycle +# bit 5: 0=clk is driven during self refresh, we don't care for APX +# bit 6: 0=use recommended falling edge of clk for addr/cmd +# bit14: 0=input buffer always powered up +# bit18: 1=cpu lock transaction enabled +# bit23-20: 5=recommended value for CL=5 and STARTBURST_DEL disabled bit31=0 +# bit27-24: 8= CL+3, STARTBURST sample stages, for freqs 400MHz, unbuffered DIMM +# bit30-28: 3 required +# bit31: 0=no additional STARTBURST delay + +DATA 0xFFD01408 0x22125451 # DDR Timing (Low) (active cycles value +1) +# bit7-4: TRCD +# bit11- 8: TRP +# bit15-12: TWR +# bit19-16: TWTR +# bit20: TRAS msb +# bit23-21: 0x0 +# bit27-24: TRRD +# bit31-28: TRTP + +DATA 0xFFD0140C 0x00000833 # DDR Timing (High) +# bit6-0: TRFC +# bit8-7: TR2R +# bit10-9: TR2W +# bit12-11: TW2W +# bit31-13: zero required + +DATA 0xFFD01410 0x0000000C # DDR Address Control +# bit1-0: 00, Cs0width=x8 +# bit3-2: 11, Cs0size=1Gb +# bit5-4: 00, Cs1width=nonexistent +# bit7-6: 00, Cs1size =nonexistent +# bit9-8: 00, Cs2width=nonexistent +# bit11-10: 00, Cs2size =nonexistent +# bit13-12: 00, Cs3width=nonexistent +# bit15-14: 00, Cs3size =nonexistent +# bit16: 0, Cs0AddrSel +# bit17: 0, Cs1AddrSel +# bit18: 0, Cs2AddrSel +# bit19: 0, Cs3AddrSel +# bit31-20: 0 required + +DATA 0xFFD01414 0x00000000 # DDR Open Pages Control +# bit0: 0, OpenPage enabled +# bit31-1: 0 required + +DATA 0xFFD01418 0x00000000 # DDR Operation +# bit3-0: 0x0, DDR cmd +# bit31-4: 0 required + +DATA 0xFFD0141C 0x00000C52 # DDR Mode +# bit2-0: 2, BurstLen=2 required +# bit3: 0, BurstType=0 required +# bit6-4: 4, CL=5 +# bit7: 0, TestMode=0 normal +# bit8: 0, DLL reset=0 normal +# bit11-9: 6, auto-precharge write recovery ???????????? +# bit12: 0, PD must be zero +# bit31-13: 0 required + +DATA 0xFFD01420 0x00000042 # DDR Extended Mode +# bit0: 0, DDR DLL enabled +# bit1: 0, DDR drive strenght normal +# bit2: 0, DDR ODT control lsd (disabled) +# bit5-3: 000, required +# bit6: 1, DDR ODT control msb, (disabled) +# bit9-7: 000, required +# bit10: 0, differential DQS enabled +# bit11: 0, required +# bit12: 0, DDR output buffer enabled +# bit31-13: 0 required + +DATA 0xFFD01424 0x0000F1FF # DDR Controller Control High +# bit2-0: 111, required +# bit3 : 1 , MBUS Burst Chop disabled +# bit6-4: 111, required +# bit7 : 0 +# bit8 : 0 +# bit9 : 0 , no half clock cycle addition to dataout +# bit10 : 0 , 1/4 clock cycle skew enabled for addr/ctl signals +# bit11 : 0 , 1/4 clock cycle skew disabled for write mesh +# bit15-12: 1111 required +# bit31-16: 0 required + +DATA 0xFFD01428 0x00085520 +DATA 0xFFD0147C 0x00008552 + +DATA 0xFFD01504 0x0FFFFFF1 # CS[0]n Size +# bit0: 1, Window enabled +# bit1: 0, Write Protect disabled +# bit3-2: 00, CS0 hit selected +# bit23-4: ones, required +# bit31-24: 0x07, Size (i.e. 128MB) + +DATA 0xFFD01508 0x00000000 # CS[1]n Base address to 0x0 + +DATA 0xFFD0150C 0x00000000 # CS[1]n Size, window disabled + +DATA 0xFFD01514 0x00000000 # CS[2]n Size, window disabled +DATA 0xFFD0151C 0x00000000 # CS[3]n Size, window disabled + +DATA 0xFFD01494 0x003C0000 # DDR ODT Control (Low) +DATA 0xFFD01498 0x00000000 # DDR ODT Control (High) +# bit1-0: 00, ODT0 controlled by ODT Control (low) register above +# bit3-2: 01, ODT1 active NEVER! +# bit31-4: zero, required + +DATA 0xFFD0149C 0x0000F80F # CPU ODT Control + +DATA 0xFFD01480 0x00000001 # DDR Initialization Control +#bit0=1, enable DDR init upon this register write + +# End of Header extension +DATA 0x0 0x0 + diff --git a/board/Seagate/nas440/nas440.c b/board/Seagate/nas440/nas440.c new file mode 100644 index 0000000000..43a08e61bf --- /dev/null +++ b/board/Seagate/nas440/nas440.c @@ -0,0 +1,378 @@ +/* + * Copyright (C) 2022 Hajo Noerenberg <hajo-uboot(a)noerenberg.de> + * + * Based on nas220.c originally written by + * Evgeni Dobrev <evgeni(a)studio-punkt.com> + * + * Based on sheevaplug.c originally written by + * Prafulla Wadaskar <prafulla(a)marvell.com> + * (C) Copyright 2009 + * Marvell Semiconductor <www.marvell.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <init.h> +#include <netdev.h> +#include <asm/arch/cpu.h> +#include <asm/arch/soc.h> +#include <asm/arch/mpp.h> +#include <asm/global_data.h> +#include <asm/mach-types.h> +#include <linux/bitops.h> +#include <bootstage.h> +#include <linux/delay.h> +#include <asm/arch/gpio.h> +#include <version.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* + * GPIO pin names, input/output direction and default values + * + * NAS440_GPIO_BUTTON_LCD_LOWER, NAS440_GPIO_BUTTON_LCD_UPPER + * Buttons next to LC display, LOW if pressed + * + * NAS440_GPIO_BUTTON_POWER + * Power button at front of case, LOW if pressed + * + * NAS440_GPIO_BUTTON_RESET + * Reset button at back of case, LOW if pressed + * + * NAS440_GPIO_LCD_HD44780_* + * HD44780-compatible LC display, control via 8bit parallel data transfer + * + * NAS440_GPIO_LED_74AHC164_* + * Control front panel LEDs via 74AHC164 8bit shift register + * + * NAS440_GPIO_SOCSATA_POWER + * 12V Power for SoC SATA ports (NAS drives 3 and 4) + * + * NAS440_GPIO_BOARD_POWER + * Shutdown board if LOW + * + */ + +#define NAS440_GPIO_LCD_HD44780_BACKLIGHT 7 +#define NAS440_GPIO_LED_74AHC164_DATA 12 +#define NAS440_GPIO_LED_74AHC164_CLK 13 +#define NAS440_GPIO_SOCSATA_POWER 28 +#define NAS440_GPIO_BUTTON_RESET 29 +#define NAS440_GPIO_BUTTON_LCD_LOWER 34 +#define NAS440_GPIO_LCD_HD44780_RS 35 +#define NAS440_GPIO_LCD_HD44780_D0 36 +#define NAS440_GPIO_LCD_HD44780_D1 37 +#define NAS440_GPIO_LCD_HD44780_D2 38 +#define NAS440_GPIO_LCD_HD44780_D3 39 +#define NAS440_GPIO_LCD_HD44780_D4 40 +#define NAS440_GPIO_LCD_HD44780_D5 41 +#define NAS440_GPIO_LCD_HD44780_D6 42 +#define NAS440_GPIO_LCD_HD44780_D7 43 +#define NAS440_GPIO_LCD_HD44780_RW 44 +#define NAS440_GPIO_LCD_HD44780_E 45 +#define NAS440_GPIO_BUTTON_LCD_UPPER 47 +#define NAS440_GPIO_BOARD_POWER 48 +#define NAS440_GPIO_BUTTON_POWER 49 + +/* + * GPIO output enable, pins 0-31 to LOW, pins 31-49 to HIGH config register + */ +#define NAS440_GE_OE_LOW (~(BIT(NAS440_GPIO_LCD_HD44780_BACKLIGHT) \ + | BIT(NAS440_GPIO_LED_74AHC164_DATA) \ + | BIT(NAS440_GPIO_LED_74AHC164_CLK) \ + | BIT(NAS440_GPIO_SOCSATA_POWER))) +#define NAS440_GE_OE_HIGH (~(BIT_MASK(NAS440_GPIO_BOARD_POWER) \ + | BIT_MASK(NAS440_GPIO_LCD_HD44780_RS) \ + | BIT_MASK(NAS440_GPIO_LCD_HD44780_D0) \ + | BIT_MASK(NAS440_GPIO_LCD_HD44780_D1) \ + | BIT_MASK(NAS440_GPIO_LCD_HD44780_D2) \ + | BIT_MASK(NAS440_GPIO_LCD_HD44780_D3) \ + | BIT_MASK(NAS440_GPIO_LCD_HD44780_D4) \ + | BIT_MASK(NAS440_GPIO_LCD_HD44780_D5) \ + | BIT_MASK(NAS440_GPIO_LCD_HD44780_D6) \ + | BIT_MASK(NAS440_GPIO_LCD_HD44780_D7) \ + | BIT_MASK(NAS440_GPIO_LCD_HD44780_RW) \ + | BIT_MASK(NAS440_GPIO_LCD_HD44780_E))) + +/* + * GPIO output default values + */ +#define NAS440_GE_OE_VAL_LOW BIT(NAS440_GPIO_LCD_HD44780_BACKLIGHT) + +#define NAS440_GE_OE_VAL_HIGH BIT_MASK(NAS440_GPIO_BOARD_POWER) + +int board_early_init_f(void) +{ + /* + * default gpio configuration + */ + mvebu_config_gpio(NAS440_GE_OE_VAL_LOW, NAS440_GE_OE_VAL_HIGH, + NAS440_GE_OE_LOW, NAS440_GE_OE_HIGH); + + /* Multi-Purpose Pins Functionality configuration */ + static const u32 kwmpp_config[] = { + MPP0_NF_IO2, + MPP1_NF_IO3, + MPP2_NF_IO4, + MPP3_NF_IO5, + MPP4_NF_IO6, + MPP5_NF_IO7, + MPP6_SYSRST_OUTn, + MPP7_GPO, /* NAS440_GPIO_LCD_HD44780_BACKLIGHT */ + MPP8_TW_SDA, + MPP9_TW_SCK, + MPP10_UART0_TXD, + MPP11_UART0_RXD, + MPP12_GPO, /* NAS440_GPIO_LED_74AHC164_DATA */ + MPP13_GPIO, /* NAS440_GPIO_LED_74AHC164_CLK */ + MPP14_SATA1_PRESENTn, + MPP15_SATA0_ACTn, + MPP16_SATA1_ACTn, + MPP17_SATA0_PRESENTn, + MPP18_NF_IO0, + MPP19_NF_IO1, + MPP20_GE1_0, /* GbE Port1, RGMII mode (12 pins GE1_0-7, GE1_10-13) */ + MPP21_GE1_1, + MPP22_GE1_2, + MPP23_GE1_3, + MPP24_GE1_4, + MPP25_GE1_5, + MPP26_GE1_6, + MPP27_GE1_7, + MPP28_GPIO, /* NAS440_GPIO_SOCSATA_POWER */ + MPP29_GPIO, /* NAS440_GPIO_BUTTON_RESET */ + MPP30_GE1_10, + MPP31_GE1_11, + MPP32_GE1_12, + MPP33_GE1_13, + MPP34_GPIO, /* NAS440_GPIO_BUTTON_LCD_LOWER */ + MPP35_GPIO, /* NAS440_GPIO_LCD_HD44780_RS */ + MPP36_GPIO, /* NAS440_GPIO_LCD_HD44780_D0 */ + MPP37_GPIO, /* NAS440_GPIO_LCD_HD44780_D1 */ + MPP38_GPIO, /* NAS440_GPIO_LCD_HD44780_D2 */ + MPP39_GPIO, /* NAS440_GPIO_LCD_HD44780_D3 */ + MPP40_GPIO, /* NAS440_GPIO_LCD_HD44780_D4 */ + MPP41_GPIO, /* NAS440_GPIO_LCD_HD44780_D5 */ + MPP42_GPIO, /* NAS440_GPIO_LCD_HD44780_D6 */ + MPP43_GPIO, /* NAS440_GPIO_LCD_HD44780_D7 */ + MPP44_GPIO, /* NAS440_GPIO_LCD_HD44780_RW */ + MPP45_GPIO, /* NAS440_GPIO_LCD_HD44780_E */ + MPP46_GPIO, + MPP47_GPIO, /* NAS440_GPIO_BUTTON_LCD_UPPER */ + MPP48_GPIO, /* NAS440_GPIO_BOARD_POWER */ + MPP49_GPIO, /* NAS440_GPIO_BUTTON_POWER */ + 0 + }; + kirkwood_mpp_conf(kwmpp_config, NULL); + return 0; +} + +/* HD44780 pins, data bits first, backlight last */ +static int hd44780_pins[12] = { + NAS440_GPIO_LCD_HD44780_D0, + NAS440_GPIO_LCD_HD44780_D1, + NAS440_GPIO_LCD_HD44780_D2, + NAS440_GPIO_LCD_HD44780_D3, + NAS440_GPIO_LCD_HD44780_D4, + NAS440_GPIO_LCD_HD44780_D5, + NAS440_GPIO_LCD_HD44780_D6, + NAS440_GPIO_LCD_HD44780_D7, + NAS440_GPIO_LCD_HD44780_E, + NAS440_GPIO_LCD_HD44780_RW, + NAS440_GPIO_LCD_HD44780_RS, + NAS440_GPIO_LCD_HD44780_BACKLIGHT +}; + +#define HD44780_NUM_COL 16 +#define HD44780_BUF_COL 40 +#define HD44780_NUM_ROW 2 + +#define HD44780_PIN_NUM (sizeof(hd44780_pins)/sizeof(int)) + +/* + * HD44780 LCD display commands - adapted from hd44780.h by Joerg Wunsch + * + * ---------------------------------------------------------------------------- + * "THE BEER-WARE LICENSE" (Revision 42): + * <joerg(a)FreeBSD.ORG> wrote this file. As long as you retain this notice you + * can do whatever you want with this stuff. If we meet some day, and you think + * this stuff is worth it, you can buy me a beer in return. Joerg Wunsch + * ---------------------------------------------------------------------------- + */ + +#define HD44780_CMD_CLR \ + 0x01 +#define HD44780_CMD_HOME \ + 0x02 +#define HD44780_CMD_ENTMODE(inc, shift) \ + (0x04 | ((inc)? 0x02: 0) | ((shift)? 1: 0)) +#define HD44780_CMD_DISPCTL(disp, cursor, blink) \ + (0x08 | ((disp)? 0x04: 0) | ((cursor)? 0x02: 0) | ((blink)? 1: 0)) +#define HD44780_CMD_SHIFT(shift, right) \ + (0x10 | ((shift)? 0x08: 0) | ((right)? 0x04: 0)) +#define HD44780_CMD_FNSET(if8bit, twoline, font5x10) \ + (0x20 | ((if8bit)? 0x10: 0) | ((twoline)? 0x08: 0) | \ + ((font5x10)? 0x04: 0)) +#define HD44780_CMD_CGADDR(addr) \ + (0x40 | ((addr) & 0x3f)) +#define HD44780_CMD_DDADDR(addr) \ + (0x80 | ((addr) & 0x7f)) + +static void lcd_send(unsigned int val, int mode) +{ + udelay(1); + kw_gpio_set_value(NAS440_GPIO_LCD_HD44780_RS, mode); + udelay(1); + + kw_gpio_set_value(NAS440_GPIO_LCD_HD44780_E, 0); + for (int i=0; i<8; i++) { + kw_gpio_set_value(hd44780_pins[i], (val&(1<<i))>>i ); + } + udelay(1); + kw_gpio_set_value(NAS440_GPIO_LCD_HD44780_E, 1); + udelay(1); + kw_gpio_set_value(NAS440_GPIO_LCD_HD44780_E, 0); + udelay(50); +} + +void lcd_init(void) +{ + for (int i=0; i<HD44780_PIN_NUM; i++) { + kw_gpio_set_valid(hd44780_pins[i], GPIO_OUTPUT_OK); + kw_gpio_direction_output(hd44780_pins[i], i == (HD44780_PIN_NUM-1)); + } + + lcd_send(HD44780_CMD_FNSET(1, 1, 0), 0); + udelay(50); + lcd_send(HD44780_CMD_FNSET(1, 1, 0), 0); + udelay(50); + lcd_send(HD44780_CMD_FNSET(1, 1, 0), 0); + udelay(50); + lcd_send(HD44780_CMD_DISPCTL(1, 0, 0), 0); + udelay(50); + lcd_send(HD44780_CMD_CLR, 0); + udelay(50); + lcd_send(HD44780_CMD_ENTMODE(1, 0), 0); + + udelay(2000); +} + +void lcd_row(int row, char *buf) +{ + int p = 0; + + if (row >= HD44780_NUM_ROW) { + return; + } + + lcd_send(HD44780_CMD_DDADDR(HD44780_BUF_COL * row + 0), 0); + for (int i=0; i<HD44780_NUM_COL; i++) { + if (buf[i] == 0) { + p++; + } + lcd_send(p ? 32 : buf[i], 1); + } +} + +enum led_disk { + LED_DSK_OFF, + LED_DSK_RED + /* LED_DSK_GREEN disk activity led is controlled directly by the hardware */ +}; + +enum led_system { + LED_SYS_OFF, + LED_SYS_BLUE, + LED_SYS_RED +}; + +void led_init(void) +{ + kw_gpio_set_valid(NAS440_GPIO_LED_74AHC164_DATA, GPIO_OUTPUT_OK); + kw_gpio_direction_output(NAS440_GPIO_LED_74AHC164_DATA, 0); + kw_gpio_set_valid(NAS440_GPIO_LED_74AHC164_CLK, GPIO_OUTPUT_OK); + kw_gpio_direction_output(NAS440_GPIO_LED_74AHC164_CLK, 0); +} + +void led_set(enum led_disk disk1, enum led_disk disk2, enum led_disk disk3, + enum led_disk disk4, enum led_system front1 ) +{ + int ledbits = (0x81 | ((front1==LED_SYS_RED)? 0x08 : 0) | ((front1==LED_SYS_BLUE)? 0x04 : 0) \ + | ((disk1==LED_DSK_RED)? 0 : 0x02) | ((disk2==LED_DSK_RED)? 0 : 0x40) \ + | ((disk3==LED_DSK_RED)? 0 : 0x20) | ((disk4==LED_DSK_RED)? 0 : 0x10)); + + for (int i=0; i<8; i++) { + kw_gpio_set_value(NAS440_GPIO_LED_74AHC164_DATA, (ledbits >> i) & 1); + udelay(1); + kw_gpio_set_value(NAS440_GPIO_LED_74AHC164_CLK, 1); + kw_gpio_set_value(NAS440_GPIO_LED_74AHC164_CLK, 0); + } +} + +/* factory firmware delays hard disk spinup, presumably to avoid power peaks */ +void delay_hdd_spinup(void) +{ + lcd_row(1, "Delay HDD spinup"); + + for (int i = 0; i<2500; i++) { + udelay(1000); + } + + kw_gpio_set_valid(NAS440_GPIO_SOCSATA_POWER, GPIO_OUTPUT_OK); + kw_gpio_direction_output(NAS440_GPIO_SOCSATA_POWER, 1); +} + +#if CONFIG_IS_ENABLED(BOOTSTAGE) +void show_boot_progress(int val) +{ + switch (val) { +/* 0123456789abcdef */ + case BOOTSTAGE_ID_BOARD_INIT_DONE: + lcd_row(1, "Board init done"); + break; + case BOOTSTAGE_ID_USB_START: + lcd_row(1, "Init USB"); + break; + case BOOTSTAGE_ID_ETH_START: + lcd_row(1, "Init ethernet"); + break; + case BOOTSTAGE_ID_MAIN_LOOP: + lcd_row(1, "Wait for input"); + break; + case BOOTSTAGE_ID_RUN_OS: + lcd_row(1, "Starting Linux"); + break; + default: + if (val < 0) /* error */ + lcd_row(1, "Error"); + break; + } +} +#endif + +int board_eth_init(struct bd_info *bis) +{ + return cpu_eth_init(bis); +} + +int board_init(void) +{ + /* + * arch number of board + */ + gd->bd->bi_arch_number = MACH_TYPE_DB88F6281_BP; + + /* adress of boot parameters */ + gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100; + + led_init(); + led_set(LED_DSK_OFF, LED_DSK_OFF, LED_DSK_OFF, LED_DSK_OFF, LED_SYS_BLUE); + + lcd_init(); + lcd_row(0, U_BOOT_VERSION ""); + + delay_hdd_spinup(); + + return 0; +} diff --git a/configs/nas440_defconfig b/configs/nas440_defconfig new file mode 100644 index 0000000000..74faf1a24b --- /dev/null +++ b/configs/nas440_defconfig @@ -0,0 +1,89 @@ +CONFIG_ARM=y +CONFIG_SKIP_LOWLEVEL_INIT=y +CONFIG_SYS_DCACHE_OFF=y +CONFIG_ARCH_CPU_INIT=y +CONFIG_ARCH_KIRKWOOD=y +CONFIG_SUPPORT_PASSING_ATAGS=y +CONFIG_CMDLINE_TAG=y +CONFIG_INITRD_TAG=y +CONFIG_SYS_KWD_CONFIG="board/Seagate/nas440/kwbimage.cfg" +CONFIG_SYS_TEXT_BASE=0x600000 +CONFIG_NR_DRAM_BANKS=2 +CONFIG_TARGET_NAS440=y +CONFIG_ENV_SIZE=0x10000 +CONFIG_ENV_OFFSET=0xA0000 +CONFIG_DEFAULT_DEVICE_TREE="kirkwood-blackarmor-nas440" +CONFIG_IDENT_STRING="\nNAS 440" +# CONFIG_SYS_MALLOC_F is not set +CONFIG_SYS_LOAD_ADDR=0x800000 +CONFIG_SHOW_BOOT_PROGRESS=y +CONFIG_BOOTSTAGE=y +CONFIG_BOOTDELAY=3 +CONFIG_USE_PREBOOT=y +CONFIG_PREBOOT="pci enum; " +# CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_HUSH_PARSER=y +CONFIG_SYS_PROMPT="nas440> " +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_SATA=y +CONFIG_CMD_PCI=y +CONFIG_CMD_DM=y +CONFIG_CMD_SCSI=y +CONFIG_CMD_NAND=y +CONFIG_CMD_USB=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_DHCP=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_CMD_EXT2=y +CONFIG_CMD_EXT4=y +CONFIG_CMD_FAT=y +CONFIG_CMD_JFFS2=y +CONFIG_CMD_MTDPARTS=y +CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:0xa0000@0x0(uboot),0x010000@0xa0000(env),0x500000@0xc0000(uimage),0x1a40000@0x5c0000(rootfs)" +CONFIG_CMD_UBI=y +CONFIG_ISO_PARTITION=y +CONFIG_EFI_PARTITION=y +# CONFIG_PARTITION_UUIDS is not set +CONFIG_OF_CONTROL=y +CONFIG_ENV_OVERWRITE=y +CONFIG_ENV_IS_IN_NAND=y +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_NETCONSOLE=y +CONFIG_DM=y +CONFIG_SYS_ATA_STRIDE=4 +CONFIG_SYS_ATA_DATA_OFFSET=0x100 +CONFIG_SYS_ATA_REG_OFFSET=0x100 +CONFIG_SYS_ATA_ALT_OFFSET=0x100 +CONFIG_KIRKWOOD_GPIO=y +CONFIG_MVEBU_GPIO=y +CONFIG_GPIO_EXTRA_HEADER=y +CONFIG_DM_GPIO=y +CONFIG_CMD_GPIO=y +CONFIG_GPIO=y +CONFIG_DM_GPIO_LOOKUP_LABEL=y +# CONFIG_MMC is not set +CONFIG_MTD=y +CONFIG_MTD_RAW_NAND=y +CONFIG_PHY_MARVELL=y +CONFIG_DM_ETH=y +CONFIG_MVGBE=y +CONFIG_MII=y +CONFIG_SATA_MV=y +CONFIG_SYS_SATA_MAX_DEVICE=2 +CONFIG_DM_RTC=y +CONFIG_RTC_MV=y +CONFIG_SYS_NS16550=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_STORAGE=y + +CONFIG_PCI=y +CONFIG_DM_PCI_COMPAT=y +CONFIG_PCI_MVEBU=y +CONFIG_AHCI_PCI=y + +CONFIG_SCSI=y +CONFIG_SCSI_AHCI=y +CONFIG_DM_SCSI=y diff --git a/drivers/ata/ahci-pci.c b/drivers/ata/ahci-pci.c index b1d231e0f9..af7e97dc4a 100644 --- a/drivers/ata/ahci-pci.c +++ b/drivers/ata/ahci-pci.c @@ -38,6 +38,7 @@ U_BOOT_DRIVER(ahci_pci) = { static struct pci_device_id ahci_pci_supported[] = { { PCI_DEVICE_CLASS(PCI_CLASS_STORAGE_SATA_AHCI, ~0) }, { PCI_DEVICE(0x1b21, 0x0611) }, + { PCI_DEVICE(0x11ab, 0x6121) }, {}, }; diff --git a/include/configs/nas440.h b/include/configs/nas440.h new file mode 100644 index 0000000000..58e6afb2c3 --- /dev/null +++ b/include/configs/nas440.h @@ -0,0 +1,50 @@ +/* + * Copyright (C) 2022 Hajo Noerenberg <hajo-uboot(a)noerenberg.de> + * + * based on work from: + * (C) Copyright 2009 + * Marvell Semiconductor <www.marvell.com> + * Written-by: Prafulla Wadaskar <prafulla(a)marvell.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _CONFIG_NAS440_H +#define _CONFIG_NAS440_H + +/* + * mv-common.h should be defined after CMD configs since it used them + * to enable certain macros + */ + +#include "mv-common.h" + +/* + * Default environment variables + */ + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "bootargs=console=ttyS0,115200\0" \ + "mtdids=nand0=orion_nand\0"\ + "mtdparts=" CONFIG_MTDPARTS_DEFAULT \ + "autostart=no\0"\ + "autoload=no\0" + +/* + * Ethernet Driver configuration + */ +#ifdef CONFIG_MVGBE +#define CONFIG_MVGBE_PORTS {1, 1} /* enable both ports */ +#define CONFIG_PHY_BASE_ADR 8 +#ifdef CONFIG_RESET_PHY_R +#undef CONFIG_RESET_PHY_R /* remove legacy reset_phy() */ +#endif +#endif /* CONFIG_MVGBE */ + +/* + * SATA driver configuration + */ +#define CONFIG_LBA48 +#define CONFIG_SYS_64BIT_LBA + +#endif /* _CONFIG_NAS440_H */ -- 2.20.1

3 11

[PATCH] phy: add of_set_phy_supported() helper, call from phy_config()
by Rasmus Villemoes 30 Jan '23

30 Jan '23

Currently, U-Boot doesn't parse a "max-speed" DT property in a phy's DT node. That property is a standard binding which should be honoured, and in linux that is done by the core phy code via a call to an of_set_phy_supported() helper. (Some ethernet drivers support a max-speed property in their DT node, but that's orthogonal to what the phy supports.) Add a similar helper in U-Boot, and call it from phy_config(). Signed-off-by: Rasmus Villemoes <rasmus.villemoes(a)prevas.dk> --- Resending, this time including the u-boot list in recipients. Sorry for the duplicate. drivers/net/phy/phy.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index e6e1755518..ec690361e6 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -599,6 +599,20 @@ int phy_register(struct phy_driver *drv) return 0; } +static int of_set_phy_supported(struct phy_device *phydev) +{ + ofnode node = phy_get_ofnode(phydev); + u32 max_speed; + + if (!ofnode_valid(node)) + return 0; + + if (!ofnode_read_u32(node, "max-speed", &max_speed)) + return phy_set_supported(phydev, max_speed); + + return 0; +} + int phy_set_supported(struct phy_device *phydev, u32 max_speed) { /* The default values for phydev->supported are provided by the PHY @@ -1070,6 +1084,12 @@ __weak int board_phy_config(struct phy_device *phydev) int phy_config(struct phy_device *phydev) { + int ret; + + ret = of_set_phy_supported(phydev); + if (ret) + return ret; + /* Invoke an optional board-specific helper */ return board_phy_config(phydev); } -- 2.31.1

4 7

[PATCH 0/2] Add support for Infineon s25fs256t
by tkuw584924＠gmail.com 26 Jan '23

26 Jan '23

From: Takahiro Kuwano <Takahiro.Kuwano(a)infineon.com> Infineon S25FS256T is 256Mb QSPI NOR Flash. https://www.infineon.com/dgdlac/Infineon-S25FS256T_256Mb_SEMPER_Nano_Flash_… Tested on Xilinx Zynq-7000 FPGA board. Takahiro Kuwano (2): mtd: spi-nor: s/s25hx_t/s25 mtd: spi-nor: Add support for s25fs256t drivers/mtd/spi/spi-nor-core.c | 87 ++++++++++++++++++++++------------ drivers/mtd/spi/spi-nor-ids.c | 2 + include/linux/mtd/spi-nor.h | 1 + 3 files changed, 61 insertions(+), 29 deletions(-) -- 2.25.1

3 4

[PATCH 00/14] fdt: Improvements for fdt and tracing
by Simon Glass 26 Jan '23

26 Jan '23

This series aims to make it easier to measure boot performance, particularly aimed at rockpro64. It includes the following: - enabling bootstage on rockpro64 (TPL, SPL, U-Boot proper) - minor fixes and tidy-ups for tracing - minor FDT code tidy-ups It also reverts a patch which slows down the boot by 30ms. This revert was requested some time ago but with this series we have the data showing the impact. Changes in v1: - Add detail of impact Simon Glass (14): trace: Use notrace for short arm: Support trace on armv8 tpm: Add a proper Kconfig option for crc8 in SPL fdt: Avoid exporting fdtdec_prepare_fdt() fdt: Drop ifdefs in fdtdec_prepare_fdt() fdt: Pass the device tree to fdtdec_prepare_fdt() fdt: Check for overlapping data and FDT trace: Move trace pointer to data section mkimage: Add a few more messages for FIT failures trace: Adjust flags in proftool trace: Update trace-format generator for newer version trace: Don't require TIMER_EARLY rockchip: Enable bootstage on rockpro64 Revert "fdtdec: drop needlessly convoluted CONFIG_PHANDLE_CHECK_SEQ" arch/arm/cpu/armv7/s5p-common/timer.c | 2 +- arch/arm/cpu/armv8/generic_timer.c | 6 +- arch/arm/mach-exynos/include/mach/cpu.h | 6 +- arch/arm/mach-rockchip/tpl.c | 18 ++++- arch/x86/include/asm/global_data.h | 2 +- arch/x86/include/asm/msr.h | 2 +- arch/x86/include/asm/u-boot-x86.h | 2 +- common/spl/spl.c | 2 +- common/spl/spl_fit.c | 1 + configs/am65x_evm_a53_defconfig | 1 + configs/evb-ast2600_defconfig | 1 + configs/rockpro64-rk3399_defconfig | 8 +++ configs/sama7g5ek_mmc1_defconfig | 1 + configs/sama7g5ek_mmc_defconfig | 1 + doc/develop/trace.rst | 2 +- include/fdtdec.h | 9 --- lib/Kconfig | 26 ++++++- lib/Makefile | 3 +- lib/efi_loader/efi_freestanding.c | 4 +- lib/fdtdec.c | 92 ++++++++++++++++--------- lib/trace.c | 29 ++++---- tools/fit_image.c | 4 +- tools/image-host.c | 6 +- tools/proftool.c | 43 +++++++----- 24 files changed, 175 insertions(+), 96 deletions(-) -- 2.39.0.314.g84b9a713c41-goog

3 30

[PATCH 0/5] video: sunxi: dw-hdmi: Partial OF conversion
by Samuel Holland 23 Jan '23

23 Jan '23

This series starts converting the DE2 video driver to use devicetree for MMIO addresses and clock/reset/regulator consumers. This is necessary for adding new SoC support (H6, D1, etc.) and will also be helpful when adding DSI output support. I picked up a couple of patches from Jernej's branch and added a couple on top. Specifically, the regulator consumer uses the AXP regulator driver[1] (when enabled) to stop relying on TF-A. I tested this series on a Pine A64 LTS board. [1]: https://patchwork.ozlabs.org/project/uboot/cover/20221128064757.2933-1-samu… Jernej Skrabec (2): video: sunxi: dw-hdmi: Probe driver by compatible video: sunxi: dw-hdmi: Read address from DT node Samuel Holland (3): clk: sunxi: Add DE2 display-related clocks/resets video: sunxi: dw-hdmi: Use DM for clock gates and resets video: sunxi: dw-hdmi: Use DM for HVCC regulator drivers/clk/sunxi/clk_a64.c | 22 ++++++++ drivers/clk/sunxi/clk_a83t.c | 22 ++++++++ drivers/clk/sunxi/clk_h3.c | 17 ++++++ drivers/clk/sunxi/clk_h6.c | 21 +++++++ drivers/clk/sunxi/clk_h616.c | 21 +++++++ drivers/clk/sunxi/clk_r40.c | 29 ++++++++++ drivers/clk/sunxi/clk_v3s.c | 9 +++ drivers/video/sunxi/sunxi_dw_hdmi.c | 87 +++++++++++++++++++---------- 8 files changed, 200 insertions(+), 28 deletions(-) -- 2.37.4

3 11