November 2022 - U-Boot

[PATCH] ddr: altera: n5x: Remove all codes used for emulation
by Jit Loon Lim 22 Nov '22

22 Nov '22

From: Tien Fong Chee <tien.fong.chee(a)intel.com> Remove all DDR4 codes used for emulation in preparation to run on n5x device. Signed-off-by: Tien Fong Chee <tien.fong.chee(a)intel.com> Signed-off-by: Jit Loon Lim <jit.loon.lim(a)intel.com> --- drivers/ddr/altera/sdram_n5x.c | 7 ------- 1 file changed, 7 deletions(-) diff --git a/drivers/ddr/altera/sdram_n5x.c b/drivers/ddr/altera/sdram_n5x.c index 8dba6bb035..5a20a8d78d 100644 --- a/drivers/ddr/altera/sdram_n5x.c +++ b/drivers/ddr/altera/sdram_n5x.c @@ -322,13 +322,6 @@ enum region_size { ONE_SIXTY_FOURTH }; -enum ddr_type { - DDRTYPE_LPDDR4_0, - DDRTYPE_LPDDR4_1, - DDRTYPE_DDR4, - DDRTYPE_UNKNOWN -}; - /* Reset type */ enum reset_type { POR_RESET, -- 2.26.2

1 0

[PATCH] ddr: altera: n5x: Restructure DDR driver in preparation to support LPDDR4
by Jit Loon Lim 22 Nov '22

22 Nov '22

From: Tien Fong Chee <tien.fong.chee(a)intel.com> Restructure DDR driver so that driver has the ability to recognize the DDR type by populating DDR handoff from bitstream. This is also in preparation to improve driver for supporting additional LPDDR4. Signed-off-by: Tien Fong Chee <tien.fong.chee(a)intel.com> Signed-off-by: Jit Loon Lim <jit.loon.lim(a)intel.com> --- drivers/ddr/altera/sdram_n5x.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/ddr/altera/sdram_n5x.c b/drivers/ddr/altera/sdram_n5x.c index 737a4e2ff1..8dba6bb035 100644 --- a/drivers/ddr/altera/sdram_n5x.c +++ b/drivers/ddr/altera/sdram_n5x.c @@ -336,6 +336,13 @@ enum reset_type { COLD_RESET }; +enum ddr_type { + DDRTYPE_LPDDR4_0, + DDRTYPE_LPDDR4_1, + DDRTYPE_DDR4, + DDRTYPE_UNKNOWN +}; + /* DDR handoff structure */ struct ddr_handoff { /* Memory reset manager base */ -- 2.26.2

1 0

[PATCH] SPI: GD SPI: added Gigadevice part #s in the ids.c file
by Victor Lim 22 Nov '22

22 Nov '22

Updated the ids.c file with Gigadevice SPI NOR part #s. Signed-Off-by: Victor Lim <vlim(a)gigadevice.com> --- drivers/mtd/spi/spi-nor-ids.c | 137 +++++++++++++++++++++++----------- 1 file changed, 92 insertions(+), 45 deletions(-) diff --git a/drivers/mtd/spi/spi-nor-ids.c b/drivers/mtd/spi/spi-nor-ids.c index 74e93d6209..662628b739 100644 --- a/drivers/mtd/spi/spi-nor-ids.c +++ b/drivers/mtd/spi/spi-nor-ids.c @@ -87,51 +87,98 @@ const struct flash_info spi_nor_ids[] = { { INFO("en25s64", 0x1c3817, 0, 64 * 1024, 128, SECT_4K) }, #endif #ifdef CONFIG_SPI_FLASH_GIGADEVICE /* GIGADEVICE */ - /* GigaDevice */ - { - INFO("gd25q16", 0xc84015, 0, 64 * 1024, 32, - SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | - SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) - }, - { - INFO("gd25q32", 0xc84016, 0, 64 * 1024, 64, - SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | - SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) - }, - { - INFO("gd25lq32", 0xc86016, 0, 64 * 1024, 64, - SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | - SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) - }, - { - INFO("gd25q64", 0xc84017, 0, 64 * 1024, 128, - SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | - SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) - }, - { - INFO("gd25lq64c", 0xc86017, 0, 64 * 1024, 128, - SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | - SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) - }, - { - INFO("gd25q128", 0xc84018, 0, 64 * 1024, 256, - SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | - SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) - }, - { - INFO("gd25lq128", 0xc86018, 0, 64 * 1024, 256, - SECT_4K | SPI_NOR_DUAL_READ | - SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) - }, - { - INFO("gd25lq256d", 0xc86019, 0, 64 * 1024, 512, - SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | - SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) - }, - { - INFO("gd25lx256e", 0xc86819, 0, 64 * 1024, 512, - SECT_4K | SPI_NOR_OCTAL_READ | SPI_NOR_4B_OPCODES) - }, +/* GigaDevice - GD25Q or B series */ + {INFO("gd25q16", 0xc84015, 0, 64 * 1024, 32, SECT_4K | + SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)}, + {INFO("gd25q32", 0xc84016, 0, 64 * 1024, 64, SECT_4K | + SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)}, + {INFO("gd25q64", 0xc84017, 0, 64 * 1024, 128, SECT_4K | + SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)}, + {INFO("gd25q128", 0xc84018, 0, 64 * 1024, 256, SECT_4K | + SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)}, + {INFO("gd25b series 256Mbit", 0xc84019, 0, 64 * 1024, 512, SECT_4K | + SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK | SPI_NOR_4B_OPCODES) }, + {INFO("gd25b series 512Mbit", 0xc8471A, 0, 64 * 1024, 1024, SECT_4K | + SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK | SPI_NOR_4B_OPCODES)}, + {INFO("gd55b series 1Gbit", 0xc8471B, 0, 64 * 1024, 2048, SECT_4K | + SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK | SPI_NOR_4B_OPCODES)}, + {INFO("gd55b series 2Gbit", 0xc8471C, 0, 64 * 1024, 4096, SECT_4K | + SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK | SPI_NOR_4B_OPCODES)}, +/* GigaDevice - GD25F series */ + {INFO("gd25f series 64Mbit", 0xc84317, 0, 64 * 1024, 128, SECT_4K | + SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK)}, + {INFO("gd25f series 128Mbit", 0xc84318, 0, 64 * 1024, 256, SECT_4K | + SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK)}, + {INFO("gd25f series 256Mbit", 0xc84319, 0, 64 * 1024, 512, SECT_4K | + SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK | SPI_NOR_4B_OPCODES)}, + {INFO("gd55f series 512Mbit", 0xc8431A, 0, 64 * 1024, 1024, SECT_4K | + SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK | SPI_NOR_4B_OPCODES)}, +/* GigaDevice - GD25T series */ + {INFO("gd25t series 512Mbit", 0xc8461A, 0, 64 * 1024, 1024, SECT_4K | + SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK | SPI_NOR_4B_OPCODES)}, + {INFO("gd55t series 1Gbit", 0xc8461B, 0, 64 * 1024, 2048, SECT_4K | + SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK | SPI_NOR_4B_OPCODES)}, + {INFO("gd55t02ge", 0xc8461C, 0, 64 * 1024, 4096, SECT_4K | + SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK | SPI_NOR_4B_OPCODES)}, +/* GigaDevice - GD25X series */ + {INFO("gd25x series 512Mbit", 0xc8481A, 0, 64 * 1024, 1024, SECT_4K | + SPI_NOR_OCTAL_READ | SPI_NOR_4B_OPCODES)}, + {INFO("gd55x series 1Gbit", 0xc8481B, 0, 64 * 1024, 2048, SECT_4K | + SPI_NOR_OCTAL_READ | SPI_NOR_4B_OPCODES)}, + {INFO("gd55x series 2Gbit", 0xc8481C, 0, 64 * 1024, 4096, SECT_4K | + SPI_NOR_OCTAL_READ | SPI_NOR_4B_OPCODES)}, +/* GigaDevice - GD25LB series */ + {INFO("gd25lb series 16Mbit", 0xc86015, 0, 64 * 1024, 32, SECT_4K | + SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK)}, + {INFO("gd25lb series 32Mbit", 0xc86016, 0, 64 * 1024, 64, SECT_4K | + SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK) }, + {INFO("gd25lb series 64Mbit", 0xc86017, 0, 64 * 1024, 128, SECT_4K | + SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK) }, + {INFO("gd25lb series 128Mbit", 0xc86018, 0, 64 * 1024, 256, SECT_4K | + SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK)}, + {INFO("gd25lb series 256Mbit", 0xc86019, 0, 64 * 1024, 512, SECT_4K | + SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK | SPI_NOR_4B_OPCODES)}, + {INFO("gd25lb series 256Mbit", 0xc86719, 0, 64 * 1024, 512, SECT_4K | + SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK | SPI_NOR_4B_OPCODES)}, + {INFO("gd25lb series 512Mbit", 0xc8671A, 0, 64 * 1024, 1024, SECT_4K | + SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK | SPI_NOR_4B_OPCODES)}, + {INFO("gd55lb series 1Gbit", 0xc8671B, 0, 64 * 1024, 2048, SECT_4K | + SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK | SPI_NOR_4B_OPCODES)}, + {INFO("gd55lb series 2Gbit", 0xc8671C, 0, 64 * 1024, 4096, SECT_4K | + SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK | SPI_NOR_4B_OPCODES)}, +/* GigaDevice - GD25LF series */ + {INFO("gd25lf series 8Mbit", 0xc86314, 0, 64 * 1024, 16, SECT_4K | + SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK)}, + {INFO("gd25lf series 16Mbit", 0xc86315, 0, 64 * 1024, 32, SECT_4K | + SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK)}, + {INFO("gd25lf series 32Mbit", 0xc86316, 0, 64 * 1024, 64, SECT_4K | + SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK) }, + {INFO("gd25lf series 64Mbit", 0xc86317, 0, 64 * 1024, 128, SECT_4K | + SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK) }, + {INFO("gd25lf series 128Mbit", 0xc86318, 0, 64 * 1024, 256, SECT_4K | + SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK) }, + {INFO("gd25lf series 256Mbit", 0xc86319, 0, 64 * 1024, 512, SECT_4K | + SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK | SPI_NOR_4B_OPCODES)}, + {INFO("gd25lf series 512Mbit", 0xc8631A, 0, 64 * 1024, 1024, SECT_4K | + SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK | SPI_NOR_4B_OPCODES)}, +/* GigaDevice - GD25LT series */ + {INFO("gd25lt256e", 0xc86619, 0, 64 * 1024, 512, SECT_4K | + SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK | SPI_NOR_4B_OPCODES)}, + {INFO("gd25lt512me", 0xc8661A, 0, 64 * 1024, 1024, SECT_4K | + SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK | SPI_NOR_4B_OPCODES)}, + {INFO("gd55lt01ge", 0xc8661B, 0, 64 * 1024, 2048, SECT_4K | + SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK | SPI_NOR_4B_OPCODES)}, + {INFO("gd55lt02ge", 0xc8661C, 0, 64 * 1024, 4096, SECT_4K | + SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK | SPI_NOR_4B_OPCODES)}, +/* GigaDevice - GD25LX series */ + {INFO("gd25lx series 256Mbit", 0xc86819, 0, 64 * 1024, 512, SECT_4K | + SPI_NOR_OCTAL_READ | SPI_NOR_4B_OPCODES)}, + {INFO("gd25lx series 512Mbit", 0xc8681A, 0, 64 * 1024, 1024, SECT_4K | + SPI_NOR_OCTAL_READ | SPI_NOR_4B_OPCODES)}, + {INFO("gd55lx series 1Gbit", 0xc8681B, 0, 64 * 1024, 2048, SECT_4K | + SPI_NOR_OCTAL_READ | SPI_NOR_4B_OPCODES)}, + {INFO("gd55lx series 2Gbit", 0xc8681C, 0, 64 * 1024, 4096, SECT_4K | + SPI_NOR_OCTAL_READ | SPI_NOR_4B_OPCODES)}, #endif #ifdef CONFIG_SPI_FLASH_ISSI /* ISSI */ /* ISSI */ -- 2.25.1

2 1

Fwd: New Defects reported by Coverity Scan for Das U-Boot
by Tom Rini 21 Nov '22

21 Nov '22

Here's the latest report ---------- Forwarded message --------- From: <scan-admin(a)coverity.com> Date: Mon, Nov 21, 2022 at 12:44 PM Subject: New Defects reported by Coverity Scan for Das U-Boot To: <tom.rini(a)gmail.com> Hi, Please find the latest report on new defect(s) introduced to Das U-Boot found with Coverity Scan. 2 new defect(s) introduced to Das U-Boot found with Coverity Scan. 3 defect(s), reported by Coverity Scan earlier, were marked fixed in the recent build analyzed by Coverity Scan. New defect(s) Reported-by: Coverity Scan Showing 2 of 2 defect(s) ** CID 376996: Error handling issues (CHECKED_RETURN) /drivers/net/sandbox-raw-bus.c: 40 in eth_raw_bus_post_bind() ________________________________________________________________________________________________________ *** CID 376996: Error handling issues (CHECKED_RETURN) /drivers/net/sandbox-raw-bus.c: 40 in eth_raw_bus_post_bind() 34 if (skip_localhost && local) 35 continue; 36 37 ub_ifname = calloc(IFNAMSIZ + sizeof(ub_ifname_pfx), 1); 38 strcpy(ub_ifname, ub_ifname_pfx); 39 strncat(ub_ifname, i->if_name, IFNAMSIZ); >>> CID 376996: Error handling issues (CHECKED_RETURN) >>> Calling "device_bind_driver" without checking return value (as is done elsewhere 12 out of 15 times). 40 device_bind_driver(dev, "eth_sandbox_raw", ub_ifname, &child); 41 42 device_set_name_alloced(child); 43 device_probe(child); 44 priv = dev_get_priv(child); 45 if (priv) { ** CID 376995: Null pointer dereferences (FORWARD_NULL) /test/test-main.c: 518 in ut_run_tests() ________________________________________________________________________________________________________ *** CID 376995: Null pointer dereferences (FORWARD_NULL) /test/test-main.c: 518 in ut_run_tests() 512 pos = dectoul(test_insert, NULL); 513 p = strchr(test_insert, ':'); 514 if (p) 515 p++; 516 517 for (test = tests; test < tests + count; test++) { >>> CID 376995: Null pointer dereferences (FORWARD_NULL) >>> Passing null pointer "p" to "strcmp", which dereferences it. [Note: The source code implementation of the function has been overridden by a builtin model.] 518 if (!strcmp(p, test->name)) 519 one = test; 520 } 521 } 522 523 for (upto = 0, test = tests; test < tests + count; test++, upto++) { -- Tom

1 0

[PATCH] board_f: Add support for CONFIG_OF_BOARD_FIXUP for XIP images
by Pali Rohár 21 Nov '22

21 Nov '22

When U-Boot is running from flash memory (execute in place) then gd->fdt_blob before relocation points to read-only flash memory. So U-Boot calls board_fix_fdt() with read-only gd->fdt_blob pointer which cause immediate CPU crash when callback is trying to modify gd->fdt_blob. Fix this issue by introducing a new config option OF_INITIAL_DTB_READONLY which moves fix_fdt callback after the reloc_fdt callback. This makes CONFIG_OF_BOARD_FIXUP working also if U-Boot before relocation is not running from read/write (S)RAM memory. This is required for mpc85xx boards when booting from flash NOR. Signed-off-by: Pali Rohár <pali(a)kernel.org> --- common/board_f.c | 8 +++++++- dts/Kconfig | 6 ++++++ 2 files changed, 13 insertions(+), 1 deletion(-) diff --git a/common/board_f.c b/common/board_f.c index 18e2246733b0..56b4eea24885 100644 --- a/common/board_f.c +++ b/common/board_f.c @@ -911,7 +911,7 @@ static const init_fnc_t init_sequence_f[] = { * - board info struct */ setup_dest_addr, -#ifdef CONFIG_OF_BOARD_FIXUP +#if defined(CONFIG_OF_BOARD_FIXUP) && !defined(CONFIG_OF_INITIAL_DTB_READONLY) fix_fdt, #endif #ifdef CONFIG_PRAM @@ -926,6 +926,10 @@ static const init_fnc_t init_sequence_f[] = { reserve_board, reserve_global_data, reserve_fdt, +#if defined(CONFIG_OF_BOARD_FIXUP) && defined(CONFIG_OF_INITIAL_DTB_READONLY) + reloc_fdt, + fix_fdt, +#endif reserve_bootstage, reserve_bloblist, reserve_arch, @@ -936,7 +940,9 @@ static const init_fnc_t init_sequence_f[] = { setup_bdinfo, display_new_sp, INIT_FUNC_WATCHDOG_RESET +#if !defined(CONFIG_OF_BOARD_FIXUP) || !defined(CONFIG_OF_INITIAL_DTB_READONLY) reloc_fdt, +#endif reloc_bootstage, reloc_bloblist, setup_reloc, diff --git a/dts/Kconfig b/dts/Kconfig index bc5f22029ff9..0bc3d741f8bc 100644 --- a/dts/Kconfig +++ b/dts/Kconfig @@ -105,6 +105,12 @@ config OF_EMBED endchoice +config OF_INITIAL_DTB_READONLY + bool "Initial DTB for DT control is read-only" + help + If initial DTB for DT control is read-only (e.g. points to + memory-mapped flash memory), then set this option. + config OF_BOARD bool "Provided by the board (e.g a previous loader) at runtime" default y if SANDBOX || OF_HAS_PRIOR_STAGE -- 2.20.1

4 9

[ANN] U-Boot v2023.01-rc2 released
by Tom Rini 21 Nov '22

21 Nov '22

Hey all, Getting back on schedule, here's -rc2. We're getting well in to the stabilization period now, but there's still some things I would like to see come in including a net PR. In terms of a changelog, git log --merges v2023.01-rc1..v2023.01-rc2 contains what I've pulled but as always, better PR messages and tags will provide better results here. Looking forward, the schedule is for now rcs every other Monday, and with final release on January 9th, 2023. Thanks all! -- Tom

1 0

[PATCH] Revert "imx: imx8: apalis: switch to binman"
by Stefano Babic 21 Nov '22

21 Nov '22

This reverts commit b8072ae848b73e89a73ba5b535324e4dc2793f37. Signed-off-by: Stefano Babic <sbabic(a)denx.de> Reported-by: Marcel Ziswiler <marcel.ziswiler(a)toradex.com> --- arch/arm/dts/fsl-imx8qm-apalis-u-boot.dtsi | 2 -- arch/arm/mach-imx/imx8/Kconfig | 1 - configs/apalis-imx8_defconfig | 1 - 3 files changed, 4 deletions(-) diff --git a/arch/arm/dts/fsl-imx8qm-apalis-u-boot.dtsi b/arch/arm/dts/fsl-imx8qm-apalis-u-boot.dtsi index 8fd0e33d2b..956d724979 100644 --- a/arch/arm/dts/fsl-imx8qm-apalis-u-boot.dtsi +++ b/arch/arm/dts/fsl-imx8qm-apalis-u-boot.dtsi @@ -3,8 +3,6 @@ * Copyright 2019 Toradex AG */ -#include "imx8qm-u-boot.dtsi" - &mu { u-boot,dm-pre-proper; }; diff --git a/arch/arm/mach-imx/imx8/Kconfig b/arch/arm/mach-imx/imx8/Kconfig index 91bd888308..37d12d1895 100644 --- a/arch/arm/mach-imx/imx8/Kconfig +++ b/arch/arm/mach-imx/imx8/Kconfig @@ -46,7 +46,6 @@ choice config TARGET_APALIS_IMX8 bool "Support Apalis iMX8 module" - select BINMAN select BOARD_LATE_INIT select IMX8QM diff --git a/configs/apalis-imx8_defconfig b/configs/apalis-imx8_defconfig index d0e24785ae..6226d50c8a 100644 --- a/configs/apalis-imx8_defconfig +++ b/configs/apalis-imx8_defconfig @@ -17,7 +17,6 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000 CONFIG_REMAKE_ELF=y CONFIG_FIT=y -CONFIG_FIT_EXTERNAL_OFFSET=0x3000 CONFIG_FIT_VERBOSE=y CONFIG_OF_SYSTEM_SETUP=y CONFIG_LOG=y -- 2.34.1

3 3

[PATCH 0/3] Nokia RX-51: Fixes for U-Boot v2023.01-rc1
by Pali Rohár 21 Nov '22

21 Nov '22

This patch series fixes U-Boot v2023.01-rc1 on Nokia N900 and extend documentation for debugging purposes. The main issue is broken POSITION_INDEPENDENT=y for (probably all) 32-bit ARM boards. Pali Rohár (3): arm32: Fix relocation of env_addr if POSITION_INDEPENDENT=y Nokia RX-51: Document debugging options and compile command Nokia RX-51: Do not overwrite standard $loadaddr variable arch/arm/lib/crt0.S | 5 +++++ doc/board/nokia/rx51.rst | 32 ++++++++++++++++++++++++++++++++ include/configs/nokia_rx51.h | 9 +++++---- 3 files changed, 42 insertions(+), 4 deletions(-) -- 2.20.1

3 7

[PATCH] Revert "cli_readline: Only insert printable chars"
by Pali Rohár 21 Nov '22

21 Nov '22

This reverts commit d2e64d29c44dee6d455f7705dd1cf1af8674ad9a. This commit broke support for pound sign (£) and euro sign (€) keys on Nokia N900 keypad. Signed-off-by: Pali Rohár <pali(a)kernel.org> --- common/cli_readline.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/common/cli_readline.c b/common/cli_readline.c index f6e2bcdeceb2..d6444f5fc1d3 100644 --- a/common/cli_readline.c +++ b/common/cli_readline.c @@ -517,10 +517,8 @@ static int cread_line(const char *const prompt, char *buf, unsigned int *len, } #endif default: - if (ichar >= ' ' && ichar <= '~') { - cread_add_char(ichar, insert, &num, &eol_num, - buf, *len); - } + cread_add_char(ichar, insert, &num, &eol_num, buf, + *len); break; } } -- 2.20.1

3 3

[PATCH] spl: Fix SPL_ATF and SPL_OPENSBI dependencies
by Samuel Holland 21 Nov '22

21 Nov '22

The code for these two options depends on having the FIT loadables recorded in the FDT. Thus, these options require the full version of the SPL_LOAD_FIT code. Signed-off-by: Samuel Holland <samuel(a)sholland.org> --- common/spl/Kconfig | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/common/spl/Kconfig b/common/spl/Kconfig index b738c749ff..4d4fa58c0c 100644 --- a/common/spl/Kconfig +++ b/common/spl/Kconfig @@ -1439,7 +1439,8 @@ config SPL_YMODEM_SUPPORT config SPL_ATF bool "Support ARM Trusted Firmware" - depends on ARM64 && SPL_FIT + depends on ARM64 + depends on SPL_LOAD_FIT && !SPL_FIT_IMAGE_TINY help ATF(ARM Trusted Firmware) is a component for ARM AArch64 which is loaded by SPL (which is considered as BL2 in ATF terminology). @@ -1486,6 +1487,7 @@ config SPL_OPTEE_IMAGE config SPL_OPENSBI bool "Support RISC-V OpenSBI" depends on RISCV && SPL_RISCV_MMODE && RISCV_SMODE + depends on SPL_LOAD_FIT && !SPL_FIT_IMAGE_TINY help OpenSBI is an open-source implementation of the RISC-V Supervisor Binary Interface (SBI) specification. U-Boot supports the OpenSBI FW_DYNAMIC -- 2.37.3

2 1