April 2021 - U-Boot

[PATCH v1 0/5] net: phy: marvell: Sync Marvell ethernet PHY code with Marvell version
by Stefan Roese 08 Apr '21

08 Apr '21

This patchset adds the missing ethernet PHY patches from the Marvell U-Boot SDK version to support and fix higher connection speeds. This is done in preparation for the integration of the Octeon TX2 CN913x support, which uses the updated version of this code. Thanks, Stefan Igal Liberman (1): net: phy: marvell: add support for 88E2110 phy Marcin Wojtas (1): net: phy: marvell: extend 88E2110 to use both 2.5GHz modes Stefan Chulski (3): net: phy: marvell: remove hardcoded PHY 2210 lane swap net: phy: marvell: Fix PHY 221 2.5G speed detection net: phy: marvell: Fix 2210 link and speed detection resolution drivers/net/phy/marvell.c | 200 ++++++++++++++++++++++++++++++++++++++ include/linux/ethtool.h | 3 +- 2 files changed, 202 insertions(+), 1 deletion(-) -- 2.31.0

4 21

[PULL] u-boot-riscv/master
by Leo Liang 08 Apr '21

08 Apr '21

Hi Tom, https://source.denx.de/u-boot/custodians/u-boot-riscv/-/pipelines/7078 The following changes since commit e9c99db7787e3b5c2ef05701177c43ed1c023c27: Merge branch '2021-04-07-CI-improvements' (2021-04-07 15:54:07 -0400) are available in the Git repository at: git@source.denx.de:u-boot/custodians/u-boot-riscv.git for you to fetch changes up to e7bb113cc4d03aeb573ff938a1d897d4b3ca99df: riscv: dts: mpfs-icicle-kit: Drop 'clock-frequency' in the uart nodes (2021-04-08 15:37:30 +0800) ---------------------------------------------------------------- Bin Meng (5): riscv: sifive: Rename fu540 board to unleashed timer: sifive_clint: Support the official clint DT bindings riscv: mpfs-icicle-kit: Increase SYS_MALLOC_F_LEN clk: mpfs_clk: Enable DM_FLAG_PRE_RELOC flag riscv: dts: mpfs-icicle-kit: Drop 'clock-frequency' in the uart nodes Heinrich Schuchardt (4): configs: EXT4, FAT, hush shell, env on S-mode MAIX riscv: simplify longjmp test: unit test for longjmp riscv: assembler versions of memcpy, memmove, memset Sean Anderson (7): wdt: dw: Switch to using fls for log2 wdt: dw: Switch to if(CONFIG()) instead of using #if wdt: dw: Enable the clock before using it wdt: dw: Free the clock on error riscv: Add watchdog bindings for the k210 riscv: Enable watchdog for the k210 riscv: Remove unused define in maix header arch/riscv/Kconfig | 84 ++++++++++++++- arch/riscv/dts/Makefile | 2 +- arch/riscv/dts/k210.dtsi | 1 - arch/riscv/dts/microchip-mpfs-icicle-kit.dts | 4 - arch/riscv/include/asm/string.h | 36 +++---- arch/riscv/lib/Makefile | 4 + arch/riscv/lib/memcpy.S | 108 ++++++++++++++++++++ arch/riscv/lib/memmove.S | 64 ++++++++++++ arch/riscv/lib/memset.S | 113 +++++++++++++++++++++ arch/riscv/lib/setjmp.S | 8 +- board/sifive/{fu540 => unleashed}/Kconfig | 6 +- board/sifive/{fu540 => unleashed}/MAINTAINERS | 10 +- board/sifive/{fu540 => unleashed}/Makefile | 2 +- board/sifive/{fu540 => unleashed}/spl.c | 0 .../{fu540/fu540.c => unleashed/unleashed.c} | 0 board/sipeed/maix/Kconfig | 2 + common/spl/Kconfig | 5 +- configs/microchip_mpfs_icicle_defconfig | 1 + ..._fu540_defconfig => sifive_unleashed_defconfig} | 2 +- configs/sipeed_maix_smode_defconfig | 11 ++ doc/board/sifive/index.rst | 2 +- doc/board/sifive/{fu540.rst => unleashed.rst} | 0 drivers/clk/microchip/mpfs_clk.c | 1 + drivers/ram/sifive/Kconfig | 2 +- drivers/reset/Kconfig | 2 +- drivers/timer/sifive_clint_timer.c | 1 + drivers/watchdog/designware_wdt.c | 37 ++++--- .../configs/{sifive-fu540.h => sifive-unleashed.h} | 0 include/configs/sipeed-maix.h | 3 - test/lib/Makefile | 1 + test/lib/longjmp.c | 73 +++++++++++++ 31 files changed, 518 insertions(+), 67 deletions(-) create mode 100644 arch/riscv/lib/memcpy.S create mode 100644 arch/riscv/lib/memmove.S create mode 100644 arch/riscv/lib/memset.S rename board/sifive/{fu540 => unleashed}/Kconfig (91%) rename board/sifive/{fu540 => unleashed}/MAINTAINERS (50%) rename board/sifive/{fu540 => unleashed}/Makefile (87%) rename board/sifive/{fu540 => unleashed}/spl.c (100%) rename board/sifive/{fu540/fu540.c => unleashed/unleashed.c} (100%) rename configs/{sifive_fu540_defconfig => sifive_unleashed_defconfig} (95%) rename doc/board/sifive/{fu540.rst => unleashed.rst} (100%) rename include/configs/{sifive-fu540.h => sifive-unleashed.h} (100%) create mode 100644 test/lib/longjmp.c Best regards, Leo

2 1

Please pull u-boot-marvell/master
by Stefan Roese 08 Apr '21

08 Apr '21

Hi Tom, please pull the next batch of Marvell MVEBU related patches. Here the summary log: ---------------------------------------------------------------- - Add Armada 38x RTC driver (Marek) - turris_omnia: Misc updates (enable RTC and other cmds) (Marek) - ds414: Misc updates (enable XHCI_PCI USB support etc) (Phil) - Convert MVEBU MMC driver to DM (Harm) - kirkwood: Misc updates and cleanups to some boards (Harm) ---------------------------------------------------------------- Here the Azure build, without any issues: https://dev.azure.com/sr0718/u-boot/_build/results?buildId=78&view=results Thanks, Stefan The following changes since commit e9c99db7787e3b5c2ef05701177c43ed1c023c27: Merge branch '2021-04-07-CI-improvements' (2021-04-07 15:54:07 -0400) are available in the Git repository at: git@source.denx.de:u-boot/custodians/u-boot-marvell.git for you to fetch changes up to b5293df17a2c9239e92c8024484cd3ad3ed55f00: configs: sheevaplug: enable driver-model based MMC (2021-04-08 08:50:52 +0200) ---------------------------------------------------------------- Harm Berntsen (8): configs: remove unused CONFIG_SYS_MMC_BASE defs configs: openrd: remove non-dm MMC driver configs: sheevaplug: remove non-dm MMC driver arm: kirkwood: remove non-dm MMC driver init configs: remove obsolete CONFIG_SYS_MMC_BASE configs: remove obsolete CONFIG_MVEBU_MMC mmc: mvebu: convert to driver model configs: sheevaplug: enable driver-model based MMC Marek Behún (4): rtc: add armada38x driver arm: mvebu: turris_omnia: Enable DM_RTC and RTC_ARMADA38X arm: mvebu: turris_omnia: Enable CMD_WDT arm: mvebu: turris_omnia: Enable CMD_FS_UUID Phil Sutter (5): arm: mvebu: ds414: Add a Kconfig defining some strings arm: mvebu: configs: ds414: Enable XHCI_PCI by default arm: mvebu: board/Synology: Unify legacy kernel support arm: mvebu: ds414: Auto-populate env if appropriate arm: mvebu: ds414: Add sample u-boot update command arch/arm/mach-kirkwood/cpu.c | 7 - board/Synology/common/Makefile | 5 + board/Synology/common/legacy.c | 76 ++++++++++ board/Synology/common/legacy.h | 33 ++++ board/Synology/ds109/ds109.c | 32 ---- board/Synology/ds109/ds109.h | 17 --- board/Synology/ds414/Kconfig | 12 ++ board/Synology/ds414/cmd_syno.c | 9 +- board/Synology/ds414/cmd_syno.h | 17 +++ board/Synology/ds414/ds414.c | 11 ++ configs/ds414_defconfig | 10 +- configs/sheevaplug_defconfig | 2 + configs/turris_omnia_defconfig | 4 + drivers/mmc/Kconfig | 9 ++ drivers/mmc/mvebu_mmc.c | 307 ++++++++++++++++++++++---------------- drivers/rtc/Kconfig | 7 + drivers/rtc/Makefile | 1 + drivers/rtc/armada38x.c | 184 +++++++++++++++++++++++ include/configs/clearfog.h | 5 - include/configs/controlcenterdc.h | 5 - include/configs/db-88f6820-gp.h | 5 - include/configs/ds109.h | 3 +- include/configs/ds414.h | 20 ++- include/configs/helios4.h | 5 - include/configs/openrd.h | 5 - include/configs/sheevaplug.h | 8 - include/mvebu_mmc.h | 13 +- scripts/config_whitelist.txt | 2 - 28 files changed, 575 insertions(+), 239 deletions(-) create mode 100644 board/Synology/common/Makefile create mode 100644 board/Synology/common/legacy.c create mode 100644 board/Synology/common/legacy.h create mode 100644 board/Synology/ds414/Kconfig create mode 100644 board/Synology/ds414/cmd_syno.h create mode 100644 drivers/rtc/armada38x.c

2 1

[PATCH v3 0/6] Enable ECDSA FIT verification for stm32mp
by Alexandru Gagniuc 08 Apr '21

08 Apr '21

This series is Part II of the ECDSA saga. It applies on top of [1]: * [PATCH v7 00/11] Add support for ECDSA image signing Changes since v2: - Spell out "elliptic curve" in Kconfig (Although RSA isn't spelled out) Changes since v1: - Add test to make sure the UCLASS is enabled - Fix check against wrong sig_len in ecdsa_romapi.c - s/U_BOOT_DEVICE/U_BOOT_DRVINFO/ - Use "if(!ret)" instead of "if (ret == 0)" - Use uclass_first_device_err() instead of uclass_first_device() - Make sure #includes are correctly alphabetized Alexandru Gagniuc (6): dm: crypto: Define UCLASS API for ECDSA signature verification lib: ecdsa: Add skeleton to implement ecdsa verification in u-boot lib: ecdsa: Implement signature verification for crypto_algo API arm: stm32mp1: Implement ECDSA signature verification Kconfig: FIT_SIGNATURE should not select RSA_VERIFY test: dm: Add test for ECDSA UCLASS support arch/arm/mach-stm32mp/Kconfig | 9 ++ arch/arm/mach-stm32mp/Makefile | 1 + arch/arm/mach-stm32mp/ecdsa_romapi.c | 106 ++++++++++++++++++++++ common/Kconfig.boot | 8 +- configs/sandbox_defconfig | 2 + include/crypto/ecdsa-uclass.h | 39 ++++++++ include/dm/uclass-id.h | 1 + include/image.h | 10 +-- include/u-boot/rsa.h | 2 +- lib/Kconfig | 1 + lib/Makefile | 1 + lib/ecdsa/Kconfig | 23 +++++ lib/ecdsa/Makefile | 1 + lib/ecdsa/ecdsa-verify.c | 128 +++++++++++++++++++++++++++ test/dm/Makefile | 1 + test/dm/ecdsa.c | 38 ++++++++ 16 files changed, 361 insertions(+), 10 deletions(-) create mode 100644 arch/arm/mach-stm32mp/ecdsa_romapi.c create mode 100644 include/crypto/ecdsa-uclass.h create mode 100644 lib/ecdsa/Kconfig create mode 100644 lib/ecdsa/Makefile create mode 100644 lib/ecdsa/ecdsa-verify.c create mode 100644 test/dm/ecdsa.c -- 2.26.3

2 7

[PATCH v5 0/8] Add FU740 chip and HiFive Unmatched board support
by Green Wan 08 Apr '21

08 Apr '21

This patch set is to add SiFive fu740 chip and HiFive Unmatched board support. Patches are split into several parts: - [PATCH 1/8] dts for fu740 - [PATCH 2/8] support for fu740 cpu - [PATCH 3/8] support for fu740 clk driver - [PATCH 4/8] rename and support for fu740 ram driver - [PATCH 5/8] add pcie driver - [PATCH 6/8] add unmatched board - [PATCH 7/8] add fu740 support to macb driver - [PATCH 8/8] set CPU speed of Unmatched board to 1.2GHz Description - For fu740 cpu support, reuse most of fu540 cpu. - For prci driver, add one abstract layer to separate fu540 and fu740. Move orignal fu540 code to separate files. - For pcie driver, it depends on gpio, prci, clk and reset drivers to do init&reset works. - Align with Linux DT file. Tests and patch checks - Able to boot both unmatched and unleashed boards. - PCIe tests . M.2 NVMe SSD . e1000 compatibale ethernet adapter (ping&tftpboot) . pci-to-usb adapter(usb mass storage) - checkpatch is performed. To keep code derived from other boards the same, ignore some warnings/errors in [PATCH 7/8]. Changlogs - V5 . Fix unleashed build error in patch [6/8] . Append one more set for 1.2GHz CPU speed . Add "#include <asm/global_data.h>" back to sifive_ddr.c . Add Reviewed-by to [4/8] and [7/8] - V4 . fixed incorrect file name in ./board/sifive/unmatched/Makefile . fixed link in doc/board/sifive/index.rst, passed 'make htmldocs' - V3 . Rebase to unleashed rename v2 patch . Rename doc/board/sifive/unmatched.rst board/sifive/unmatched/unmatched.c . Fix tail whitespace . Add 'git mv' info to ram driver and merge patch back to one . Add comment to macb driver for PLL hardware quirk . Add reviewed-by to patch [6/7] . Add 'gpio-poweroff' node for upcoming opensbi integration - V2 . Rebase to unleashed rename patch . remove unnessaary fu540 changes . split ram driver patch into 2 to keep 'git mv' info . use a shorter name for unmatched support . Remove redundant&incorrect temperature-sensor in DT . Remove unnecessary USB EHCI & OHCI from defconfig . Revised fu740 doc . Fixed year of copyright . Add reviewed-by received in v1 patch David Abdurachmanov (1): drivers: net: macb: add fu740 support Green Wan (6): riscv: dts: add fu740 support riscv: cpu: fu740: Add support for cpu fu740 drivers: clk: add fu740 support drivers: ram: sifive: rename fu540_ddr and add fu740 support drivers: pci: add pcie support for fu740 board: sifive: add HiFive Unmatched board support Greentime Hu (1): arch: riscv: dts: Set speed of FU740 to 1.2GHz arch/riscv/Kconfig | 5 + arch/riscv/cpu/fu740/Kconfig | 37 + arch/riscv/cpu/fu740/Makefile | 12 + arch/riscv/cpu/fu740/cache.c | 55 + arch/riscv/cpu/fu740/cpu.c | 22 + arch/riscv/cpu/fu740/dram.c | 38 + arch/riscv/cpu/fu740/spl.c | 23 + arch/riscv/dts/Makefile | 1 + arch/riscv/dts/fu740-c000-u-boot.dtsi | 106 ++ arch/riscv/dts/fu740-c000.dtsi | 329 +++++ arch/riscv/dts/fu740-hifive-unmatched-a00-ddr.dtsi | 1489 ++++++++++++++++++++ arch/riscv/dts/hifive-unmatched-a00-u-boot.dtsi | 40 + arch/riscv/dts/hifive-unmatched-a00.dts | 259 ++++ arch/riscv/include/asm/arch-fu740/cache.h | 14 + arch/riscv/include/asm/arch-fu740/clk.h | 14 + arch/riscv/include/asm/arch-fu740/gpio.h | 38 + arch/riscv/include/asm/arch-fu740/reset.h | 13 + arch/riscv/include/asm/arch-fu740/spl.h | 14 + arch/riscv/lib/sifive_clint.c | 1 - board/sifive/unleashed/Kconfig | 1 + board/sifive/unmatched/Kconfig | 50 + board/sifive/unmatched/MAINTAINERS | 9 + board/sifive/unmatched/Makefile | 9 + board/sifive/unmatched/spl.c | 85 ++ board/sifive/unmatched/unmatched.c | 24 + common/spl/Kconfig | 4 +- configs/sifive_unleashed_defconfig | 1 + configs/sifive_unmatched_defconfig | 53 + doc/board/sifive/index.rst | 1 + doc/board/sifive/unmatched.rst | 536 +++++++ drivers/clk/sifive/Kconfig | 8 +- drivers/clk/sifive/Makefile | 4 +- drivers/clk/sifive/fu540-prci.c | 769 +--------- drivers/clk/sifive/fu540-prci.h | 22 + drivers/clk/sifive/fu740-prci.c | 158 +++ drivers/clk/sifive/fu740-prci.h | 22 + drivers/clk/sifive/sifive-prci.c | 733 ++++++++++ drivers/clk/sifive/sifive-prci.h | 323 +++++ drivers/net/macb.c | 13 +- drivers/pci/Kconfig | 9 + drivers/pci/Makefile | 1 + drivers/pci/pcie_sifive.c | 797 +++++++++++ drivers/pci/pcie_sifive.h | 374 +++++ drivers/ram/sifive/Kconfig | 8 +- drivers/ram/sifive/Makefile | 2 +- drivers/ram/sifive/fu540_ddr.c | 410 ------ drivers/ram/sifive/sifive_ddr.c | 410 ++++++ drivers/reset/Kconfig | 2 +- include/configs/sifive-unmatched.h | 85 ++ include/dt-bindings/clock/sifive-fu740-prci.h | 25 + include/dt-bindings/reset/sifive-fu740-prci.h | 19 + 51 files changed, 6304 insertions(+), 1173 deletions(-) create mode 100644 arch/riscv/cpu/fu740/Kconfig create mode 100644 arch/riscv/cpu/fu740/Makefile create mode 100644 arch/riscv/cpu/fu740/cache.c create mode 100644 arch/riscv/cpu/fu740/cpu.c create mode 100644 arch/riscv/cpu/fu740/dram.c create mode 100644 arch/riscv/cpu/fu740/spl.c create mode 100644 arch/riscv/dts/fu740-c000-u-boot.dtsi create mode 100644 arch/riscv/dts/fu740-c000.dtsi create mode 100644 arch/riscv/dts/fu740-hifive-unmatched-a00-ddr.dtsi create mode 100644 arch/riscv/dts/hifive-unmatched-a00-u-boot.dtsi create mode 100644 arch/riscv/dts/hifive-unmatched-a00.dts create mode 100644 arch/riscv/include/asm/arch-fu740/cache.h create mode 100644 arch/riscv/include/asm/arch-fu740/clk.h create mode 100644 arch/riscv/include/asm/arch-fu740/gpio.h create mode 100644 arch/riscv/include/asm/arch-fu740/reset.h create mode 100644 arch/riscv/include/asm/arch-fu740/spl.h create mode 100644 board/sifive/unmatched/Kconfig create mode 100644 board/sifive/unmatched/MAINTAINERS create mode 100644 board/sifive/unmatched/Makefile create mode 100644 board/sifive/unmatched/spl.c create mode 100644 board/sifive/unmatched/unmatched.c create mode 100644 configs/sifive_unmatched_defconfig create mode 100644 doc/board/sifive/unmatched.rst create mode 100644 drivers/clk/sifive/fu540-prci.h create mode 100644 drivers/clk/sifive/fu740-prci.c create mode 100644 drivers/clk/sifive/fu740-prci.h create mode 100644 drivers/clk/sifive/sifive-prci.c create mode 100644 drivers/clk/sifive/sifive-prci.h create mode 100644 drivers/pci/pcie_sifive.c create mode 100644 drivers/pci/pcie_sifive.h delete mode 100644 drivers/ram/sifive/fu540_ddr.c create mode 100644 drivers/ram/sifive/sifive_ddr.c create mode 100644 include/configs/sifive-unmatched.h create mode 100644 include/dt-bindings/clock/sifive-fu740-prci.h create mode 100644 include/dt-bindings/reset/sifive-fu740-prci.h -- 2.7.4

2 10

[PATCH 1/1] efi_loader: esrt: wrong type for LocateHandleBuffer()
by Heinrich Schuchardt 08 Apr '21

08 Apr '21

efi_locate_handle_buffer() expects no_handles to be of type efi_uintn_t *. Signed-off-by: Heinrich Schuchardt <xypron.glpk(a)gmx.de> --- lib/efi_loader/efi_esrt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/lib/efi_loader/efi_esrt.c b/lib/efi_loader/efi_esrt.c index a750164bc4..40f53260e4 100644 --- a/lib/efi_loader/efi_esrt.c +++ b/lib/efi_loader/efi_esrt.c @@ -316,7 +316,7 @@ efi_status_t efi_esrt_populate(void) { efi_handle_t *base_handle = NULL; efi_handle_t *it_handle; - size_t no_handles = 0; + efi_uintn_t no_handles = 0; struct efi_firmware_management_protocol *fmp; efi_status_t ret; u32 num_entries = 0; -- 2.30.2

1 0

[PATCH 1/1] efi_loader: use correct printf codes
by Heinrich Schuchardt 08 Apr '21

08 Apr '21

For printing u32 use %u not %d. Signed-off-by: Heinrich Schuchardt <xypron.glpk(a)gmx.de> --- lib/efi_loader/efi_esrt.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/lib/efi_loader/efi_esrt.c b/lib/efi_loader/efi_esrt.c index 8815e56e15..a750164bc4 100644 --- a/lib/efi_loader/efi_esrt.c +++ b/lib/efi_loader/efi_esrt.c @@ -120,8 +120,8 @@ efi_status_t efi_esrt_allocate_install(u32 num_entries) (void **)&new_esrt); if (ret != EFI_SUCCESS) { - EFI_PRINT("ESRT cannot allocate memory for %d entries (%d bytes)\n", - num_entries, efi_esrt_entries_to_size(num_entries)); + EFI_PRINT("ESRT cannot allocate memory for %u entries (%u bytes)\n", + num_entries, size); return ret; } @@ -180,7 +180,7 @@ struct efi_system_resource_entry *esrt_find_entry(efi_guid_t *img_fw_class) /* Check if the image with img_fw_class is already in the ESRT. */ for (u32 idx = 0; idx < filled_entries; idx++) { if (!guidcmp(&entry[idx].fw_class, img_fw_class)) { - EFI_PRINT("ESRT found entry for image %pUl at index %d\n", + EFI_PRINT("ESRT found entry for image %pUl at index %u\n", img_fw_class, idx); return &entry[idx]; } @@ -202,7 +202,7 @@ struct efi_system_resource_entry *esrt_find_entry(efi_guid_t *img_fw_class) */ esrt->fw_resource_count++; entry[filled_entries].fw_class = *img_fw_class; - EFI_PRINT("ESRT allocated new entry for image %pUl at index %d\n", + EFI_PRINT("ESRT allocated new entry for image %pUl at index %u\n", img_fw_class, filled_entries); return &entry[filled_entries]; @@ -363,7 +363,7 @@ efi_status_t efi_esrt_populate(void) &handler); if (ret != EFI_SUCCESS) { - EFI_PRINT("ESRT Unable to find FMP handle (%d)\n", + EFI_PRINT("ESRT Unable to find FMP handle (%u)\n", idx); goto out; } @@ -414,7 +414,7 @@ efi_status_t efi_esrt_populate(void) EFI_CALL(efi_free_pool(img_info)); } - EFI_PRINT("ESRT create table with %d entries\n", num_entries); + EFI_PRINT("ESRT create table with %u entries\n", num_entries); /* * Allocate an ESRT with the sufficient number of entries to accommodate * all the FMPs in the system. @@ -435,7 +435,7 @@ efi_status_t efi_esrt_populate(void) &handler)); if (ret != EFI_SUCCESS) { - EFI_PRINT("ESRT unable to find FMP handle (%d)\n", + EFI_PRINT("ESRT unable to find FMP handle (%u)\n", idx); break; } -- 2.30.2

1 0

[PATCH v2 0/5] board: imx8mm: Add Engicam i.Core MX8M Mini SoM
by Jagan Teki 08 Apr '21

08 Apr '21

Patch series for Engicam i.Core MX8M Mini SOM and it's associated carrier board dts(i) support. patch 1-2: add imx8mm-u-boot.dtsi, header improvement code patch 3: Engicam i.Core MX8M Mini SoM dts patch 4-5: EDIMM2.2, C.TOUCH 2.0 Carrier boards Changes for v2: - add Linux commit sha1 in commit messages. Any inputs? Jagan. Jagan Teki (5): arm64: dts: imx8mm: Add common -u-boot.dtsi configs: Add imx8mm-common header arm64: dts: imx8mm: Add Engicam i.Core MX8M Mini SoM board: imx8mm: Add Engicam i.Core MX8M Mini EDIMM2.2 Starter Kit board: imx8mm: Add Engicam i.Core MX8M Mini C.TOUCH 2.0 arch/arm/dts/Makefile | 2 + arch/arm/dts/imx8mm-beacon-kit-u-boot.dtsi | 37 +- arch/arm/dts/imx8mm-evk-u-boot.dtsi | 37 +- .../imx8mm-icore-mx8mm-ctouch2-u-boot.dtsi | 31 + arch/arm/dts/imx8mm-icore-mx8mm-ctouch2.dts | 97 + .../imx8mm-icore-mx8mm-edimm2.2-u-boot.dtsi | 31 + arch/arm/dts/imx8mm-icore-mx8mm-edimm2.2.dts | 97 + arch/arm/dts/imx8mm-icore-mx8mm-u-boot.dtsi | 27 + arch/arm/dts/imx8mm-icore-mx8mm.dtsi | 232 +++ arch/arm/dts/imx8mm-u-boot.dtsi | 39 + arch/arm/dts/imx8mm-venice-gw700x-u-boot.dtsi | 35 +- arch/arm/dts/imx8mm-venice-u-boot.dtsi | 37 +- arch/arm/dts/imx8mm-verdin-u-boot.dtsi | 38 +- arch/arm/dts/phycore-imx8mm-u-boot.dtsi | 37 +- arch/arm/mach-imx/imx8m/Kconfig | 19 + board/engicam/imx8mm/Kconfig | 14 + board/engicam/imx8mm/MAINTAINERS | 13 + board/engicam/imx8mm/Makefile | 12 + board/engicam/imx8mm/icore_mx8mm.c | 85 + board/engicam/imx8mm/lpddr4_timing.c | 1846 +++++++++++++++++ board/engicam/imx8mm/spl.c | 101 + configs/imx8mm-icore-mx8mm-ctouch2_defconfig | 92 + configs/imx8mm-icore-mx8mm-edimm2.2_defconfig | 92 + include/configs/imx8mm-common.h | 48 + include/configs/imx8mm_beacon.h | 48 +- include/configs/imx8mm_evk.h | 45 +- include/configs/imx8mm_icore_mx8mm.h | 58 + include/configs/imx8mm_venice.h | 46 +- include/configs/phycore_imx8mm.h | 43 +- include/configs/verdin-imx8mm.h | 42 +- 30 files changed, 2968 insertions(+), 413 deletions(-) create mode 100644 arch/arm/dts/imx8mm-icore-mx8mm-ctouch2-u-boot.dtsi create mode 100644 arch/arm/dts/imx8mm-icore-mx8mm-ctouch2.dts create mode 100644 arch/arm/dts/imx8mm-icore-mx8mm-edimm2.2-u-boot.dtsi create mode 100644 arch/arm/dts/imx8mm-icore-mx8mm-edimm2.2.dts create mode 100644 arch/arm/dts/imx8mm-icore-mx8mm-u-boot.dtsi create mode 100644 arch/arm/dts/imx8mm-icore-mx8mm.dtsi create mode 100644 arch/arm/dts/imx8mm-u-boot.dtsi create mode 100644 board/engicam/imx8mm/Kconfig create mode 100644 board/engicam/imx8mm/MAINTAINERS create mode 100644 board/engicam/imx8mm/Makefile create mode 100644 board/engicam/imx8mm/icore_mx8mm.c create mode 100644 board/engicam/imx8mm/lpddr4_timing.c create mode 100644 board/engicam/imx8mm/spl.c create mode 100644 configs/imx8mm-icore-mx8mm-ctouch2_defconfig create mode 100644 configs/imx8mm-icore-mx8mm-edimm2.2_defconfig create mode 100644 include/configs/imx8mm-common.h create mode 100644 include/configs/imx8mm_icore_mx8mm.h -- 2.25.1

4 10

[PATCH v2] arm64: dts: meson: odroidc2: readd PHY reset properties
by Stefan Agner 08 Apr '21

08 Apr '21

The sync of the device tree and dt-bindings from Linux v5.6-rc2 11a48a5a18c6 ("Linux 5.6-rc2") causes Ethernet to break on some ODROID-C2. The PHY seems to need proper reset timing to be functional in U-Boot and Linux afterwards. Readd the old PHY reset bindings for dwmac until we support the new bindings in the PHY node. Fixes: dd5f2351e99a ("arm64: dts: meson: sync dt and bindings from v5.6-rc2") Signed-off-by: Stefan Agner <stefan(a)agner.ch> --- arch/arm/dts/meson-gxbb-odroidc2-u-boot.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/dts/meson-gxbb-odroidc2-u-boot.dtsi b/arch/arm/dts/meson-gxbb-odroidc2-u-boot.dtsi index 90087b00db..5a2be8171e 100644 --- a/arch/arm/dts/meson-gxbb-odroidc2-u-boot.dtsi +++ b/arch/arm/dts/meson-gxbb-odroidc2-u-boot.dtsi @@ -29,6 +29,12 @@ }; }; +&ethmac { + snps,reset-gpio = <&gpio GPIOZ_14 0>; + snps,reset-delays-us = <0 10000 1000000>; + snps,reset-active-low; +}; + &usb0 { status = "disabled"; }; -- 2.31.1

2 1

[PATCH v2 0/8] Convert mvebu_mmc driver to driver model
by Harm Berntsen 08 Apr '21

08 Apr '21

This series converts the existing mvebu_mmc driver to the driver model. Only two boards in the u-boot tree were using this: openrd and sheevaplug. The openrd board does currently not support driver model at all. Given the deadlines for conversion, this patch series drops MMC support for that board. The sheevaplug should still work but I don't have hardware to test it on. I've tested the driver on an out of tree Kirkwood board. CC: Rick Thomas <rick.thomas(a)pobox.com> CC: Chris Packham <judge.packham(a)gmail.com> CC: Vagrant Cascadian <vagrant(a)debian.org> Thanks for the feedback :)! Changes in v2: - Fixed patch style by sending patch through patman + git send-email - Add commit text Harm Berntsen (8): configs: remove unused CONFIG_SYS_MMC_BASE defs configs: openrd: remove non-dm MMC driver configs: sheevaplug: remove non-dm MMC driver arm: kirkwood: remove non-dm MMC driver init configs: remove obsolete CONFIG_SYS_MMC_BASE configs: remove obsolete CONFIG_MVEBU_MMC mmc: mvebu: convert to driver model configs: sheevaplug: enable driver-model based MMC arch/arm/mach-kirkwood/cpu.c | 7 - configs/sheevaplug_defconfig | 2 + drivers/mmc/Kconfig | 9 + drivers/mmc/mvebu_mmc.c | 309 ++++++++++++++++++------------ include/configs/clearfog.h | 5 - include/configs/controlcenterdc.h | 5 - include/configs/db-88f6820-gp.h | 5 - include/configs/helios4.h | 5 - include/configs/openrd.h | 5 - include/configs/sheevaplug.h | 8 - include/mvebu_mmc.h | 13 +- scripts/config_whitelist.txt | 2 - 12 files changed, 196 insertions(+), 179 deletions(-) -- 2.31.1

3 11