Drop the example, for two reasons. First, it is tapping directly into
the IO accessors of the SMC911x, while it should instead go through
the net device API. Second, this makes conversion of the SMC911x driver
to DM real hard.
Signed-off-by: Marek Vasut <marek.vasut+renesas(a)gmail.com>
Cc: Joe Hershberger <joe.hershberger(a)ni.com>
Cc: Tom Rini <trini(a)konsulko.com>
---
examples/standalone/Makefile | 1 -
examples/standalone/smc911x_eeprom.c | 379 ---------------------------
2 files changed, 380 deletions(-)
delete mode 100644 examples/standalone/smc911x_eeprom.c
diff --git a/examples/standalone/Makefile b/examples/standalone/Makefile
index 0b17a91804..5c8d56c92c 100644
--- a/examples/standalone/Makefile
+++ b/examples/standalone/Makefile
@@ -5,7 +5,6 @@
extra-y := hello_world
extra-$(CONFIG_SMC91111) += smc91111_eeprom
-extra-$(CONFIG_SMC911X) += smc911x_eeprom
extra-$(CONFIG_SPI_FLASH_ATMEL) += atmel_df_pow2
extra-$(CONFIG_PPC) += sched
diff --git a/examples/standalone/smc911x_eeprom.c b/examples/standalone/smc911x_eeprom.c
deleted file mode 100644
index 2c05ed902d..0000000000
--- a/examples/standalone/smc911x_eeprom.c
+++ /dev/null
@@ -1,379 +0,0 @@
-/*
- * smc911x_eeprom.c - EEPROM interface to SMC911x parts.
- * Only tested on SMSC9118 though ...
- *
- * Copyright 2004-2009 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- *
- * Based on smc91111_eeprom.c which:
- * Heavily borrowed from the following peoples GPL'ed software:
- * - Wolfgang Denk, DENX Software Engineering, wd(a)denx.de
- * Das U-Boot
- * - Ladislav Michl ladis(a)linux-mips.org
- * A rejected patch on the U-Boot mailing list
- */
-
-#include <common.h>
-#include <console.h>
-#include <exports.h>
-#include <linux/ctype.h>
-#include "../drivers/net/smc911x.h"
-
-/**
- * smsc_ctrlc - detect press of CTRL+C (common ctrlc() isnt exported!?)
- */
-static int smsc_ctrlc(void)
-{
- return (tstc() && getc() == 0x03);
-}
-
-/**
- * usage - dump usage information
- */
-static void usage(void)
-{
- puts(
- "MAC/EEPROM Commands:\n"
- " P : Print the MAC addresses\n"
- " D : Dump the EEPROM contents\n"
- " M : Dump the MAC contents\n"
- " C : Copy the MAC address from the EEPROM to the MAC\n"
- " W : Write a register in the EEPROM or in the MAC\n"
- " Q : Quit\n"
- "\n"
- "Some commands take arguments:\n"
- " W <E|M> <register> <value>\n"
- " E: EEPROM M: MAC\n"
- );
-}
-
-/**
- * dump_regs - dump the MAC registers
- *
- * Registers 0x00 - 0x50 are FIFOs. The 0x50+ are the control registers
- * and they're all 32bits long. 0xB8+ are reserved, so don't bother.
- */
-static void dump_regs(struct eth_device *dev)
-{
- u8 i, j = 0;
- for (i = 0x50; i < 0xB8; i += sizeof(u32))
- printf("%02x: 0x%08x %c", i,
- smc911x_reg_read(dev, i),
- (j++ % 2 ? '\n' : ' '));
-}
-
-/**
- * do_eeprom_cmd - handle eeprom communication
- */
-static int do_eeprom_cmd(struct eth_device *dev, int cmd, u8 reg)
-{
- if (smc911x_reg_read(dev, E2P_CMD) & E2P_CMD_EPC_BUSY) {
- printf("eeprom_cmd: busy at start (E2P_CMD = 0x%08x)\n",
- smc911x_reg_read(dev, E2P_CMD));
- return -1;
- }
-
- smc911x_reg_write(dev, E2P_CMD, E2P_CMD_EPC_BUSY | cmd | reg);
-
- while (smc911x_reg_read(dev, E2P_CMD) & E2P_CMD_EPC_BUSY)
- if (smsc_ctrlc()) {
- printf("eeprom_cmd: timeout (E2P_CMD = 0x%08x)\n",
- smc911x_reg_read(dev, E2P_CMD));
- return -1;
- }
-
- return 0;
-}
-
-/**
- * read_eeprom_reg - read specified register in EEPROM
- */
-static u8 read_eeprom_reg(struct eth_device *dev, u8 reg)
-{
- int ret = do_eeprom_cmd(dev, E2P_CMD_EPC_CMD_READ, reg);
- return (ret ? : smc911x_reg_read(dev, E2P_DATA));
-}
-
-/**
- * write_eeprom_reg - write specified value into specified register in EEPROM
- */
-static int write_eeprom_reg(struct eth_device *dev, u8 value, u8 reg)
-{
- int ret;
-
- /* enable erasing/writing */
- ret = do_eeprom_cmd(dev, E2P_CMD_EPC_CMD_EWEN, reg);
- if (ret)
- goto done;
-
- /* erase the eeprom reg */
- ret = do_eeprom_cmd(dev, E2P_CMD_EPC_CMD_ERASE, reg);
- if (ret)
- goto done;
-
- /* write the eeprom reg */
- smc911x_reg_write(dev, E2P_DATA, value);
- ret = do_eeprom_cmd(dev, E2P_CMD_EPC_CMD_WRITE, reg);
- if (ret)
- goto done;
-
- /* disable erasing/writing */
- ret = do_eeprom_cmd(dev, E2P_CMD_EPC_CMD_EWDS, reg);
-
- done:
- return ret;
-}
-
-/**
- * skip_space - find first non-whitespace in given pointer
- */
-static char *skip_space(char *buf)
-{
- while (isblank(buf[0]))
- ++buf;
- return buf;
-}
-
-/**
- * write_stuff - handle writing of MAC registers / eeprom
- */
-static void write_stuff(struct eth_device *dev, char *line)
-{
- char dest;
- char *endp;
- u8 reg;
- u32 value;
-
- /* Skip over the "W " part of the command */
- line = skip_space(line + 1);
-
- /* Figure out destination */
- switch (line[0]) {
- case 'E':
- case 'M':
- dest = line[0];
- break;
- default:
- invalid_usage:
- printf("ERROR: Invalid write usage\n");
- usage();
- return;
- }
-
- /* Get the register to write */
- line = skip_space(line + 1);
- reg = simple_strtoul(line, &endp, 16);
- if (line == endp)
- goto invalid_usage;
-
- /* Get the value to write */
- line = skip_space(endp);
- value = simple_strtoul(line, &endp, 16);
- if (line == endp)
- goto invalid_usage;
-
- /* Check for trailing cruft */
- line = skip_space(endp);
- if (line[0])
- goto invalid_usage;
-
- /* Finally, execute the command */
- if (dest == 'E') {
- printf("Writing EEPROM register %02x with %02x\n", reg, value);
- write_eeprom_reg(dev, value, reg);
- } else {
- printf("Writing MAC register %02x with %08x\n", reg, value);
- smc911x_reg_write(dev, reg, value);
- }
-}
-
-/**
- * copy_from_eeprom - copy MAC address in eeprom to address registers
- */
-static void copy_from_eeprom(struct eth_device *dev)
-{
- ulong addrl =
- read_eeprom_reg(dev, 0x01) |
- read_eeprom_reg(dev, 0x02) << 8 |
- read_eeprom_reg(dev, 0x03) << 16 |
- read_eeprom_reg(dev, 0x04) << 24;
- ulong addrh =
- read_eeprom_reg(dev, 0x05) |
- read_eeprom_reg(dev, 0x06) << 8;
- smc911x_set_mac_csr(dev, ADDRL, addrl);
- smc911x_set_mac_csr(dev, ADDRH, addrh);
- puts("EEPROM contents copied to MAC\n");
-}
-
-/**
- * print_macaddr - print MAC address registers and MAC address in eeprom
- */
-static void print_macaddr(struct eth_device *dev)
-{
- puts("Current MAC Address in MAC: ");
- ulong addrl = smc911x_get_mac_csr(dev, ADDRL);
- ulong addrh = smc911x_get_mac_csr(dev, ADDRH);
- printf("%02x:%02x:%02x:%02x:%02x:%02x\n",
- (u8)(addrl), (u8)(addrl >> 8), (u8)(addrl >> 16),
- (u8)(addrl >> 24), (u8)(addrh), (u8)(addrh >> 8));
-
- puts("Current MAC Address in EEPROM: ");
- int i;
- for (i = 1; i < 6; ++i)
- printf("%02x:", read_eeprom_reg(dev, i));
- printf("%02x\n", read_eeprom_reg(dev, i));
-}
-
-/**
- * dump_eeprom - dump the whole content of the EEPROM
- */
-static void dump_eeprom(struct eth_device *dev)
-{
- int i;
- puts("EEPROM:\n");
- for (i = 0; i < 7; ++i)
- printf("%02x: 0x%02x\n", i, read_eeprom_reg(dev, i));
-}
-
-/**
- * smc911x_init - get the MAC/EEPROM up and ready for use
- */
-static int smc911x_init(struct eth_device *dev)
-{
- /* See if there is anything there */
- if (smc911x_detect_chip(dev))
- return 1;
-
- smc911x_reset(dev);
-
- /* Make sure we set EEDIO/EECLK to the EEPROM */
- if (smc911x_reg_read(dev, GPIO_CFG) & GPIO_CFG_EEPR_EN) {
- while (smc911x_reg_read(dev, E2P_CMD) & E2P_CMD_EPC_BUSY)
- if (smsc_ctrlc()) {
- printf("init: timeout (E2P_CMD = 0x%08x)\n",
- smc911x_reg_read(dev, E2P_CMD));
- return 1;
- }
- smc911x_reg_write(dev, GPIO_CFG,
- smc911x_reg_read(dev, GPIO_CFG) & ~GPIO_CFG_EEPR_EN);
- }
-
- return 0;
-}
-
-/**
- * getline - consume a line of input and handle some escape sequences
- */
-static char *getline(void)
-{
- static char buffer[100];
- char c;
- size_t i;
-
- i = 0;
- while (1) {
- buffer[i] = '\0';
- while (!tstc())
- continue;
-
- c = getc();
- /* Convert to uppercase */
- if (c >= 'a' && c <= 'z')
- c -= ('a' - 'A');
-
- switch (c) {
- case '\r': /* Enter/Return key */
- case '\n':
- puts("\n");
- return buffer;
-
- case 0x03: /* ^C - break */
- return NULL;
-
- case 0x5F:
- case 0x08: /* ^H - backspace */
- case 0x7F: /* DEL - backspace */
- if (i) {
- puts("\b \b");
- i--;
- }
- break;
-
- default:
- /* Ignore control characters */
- if (c < 0x20)
- break;
- /* Queue up all other characters */
- buffer[i++] = c;
- printf("%c", c);
- break;
- }
- }
-}
-
-/**
- * smc911x_eeprom - our application's main() function
- */
-int smc911x_eeprom(int argc, char * const argv[])
-{
- /* Avoid initializing on stack as gcc likes to call memset() */
- struct eth_device dev;
- dev.iobase = CONFIG_SMC911X_BASE;
-
- /* Print the ABI version */
- app_startup(argv);
- if (XF_VERSION != get_version()) {
- printf("Expects ABI version %d\n", XF_VERSION);
- printf("Actual U-Boot ABI version %lu\n", get_version());
- printf("Can't run\n\n");
- return 1;
- }
-
- /* Initialize the MAC/EEPROM somewhat */
- puts("\n");
- if (smc911x_init(&dev))
- return 1;
-
- /* Dump helpful usage information */
- puts("\n");
- usage();
- puts("\n");
-
- while (1) {
- char *line;
-
- /* Send the prompt and wait for a line */
- puts("eeprom> ");
- line = getline();
-
- /* Got a ctrl+c */
- if (!line)
- return 0;
-
- /* Eat leading space */
- line = skip_space(line);
-
- /* Empty line, try again */
- if (!line[0])
- continue;
-
- /* Only accept 1 letter commands */
- if (line[0] && line[1] && !isblank(line[1]))
- goto unknown_cmd;
-
- /* Now parse the command */
- switch (line[0]) {
- case 'W': write_stuff(&dev, line); break;
- case 'D': dump_eeprom(&dev); break;
- case 'M': dump_regs(&dev); break;
- case 'C': copy_from_eeprom(&dev); break;
- case 'P': print_macaddr(&dev); break;
- unknown_cmd:
- default: puts("ERROR: Unknown command!\n\n");
- case '?':
- case 'H': usage(); break;
- case 'Q': return 0;
- }
- }
-}
--
2.25.0
