January 2020 - U-Boot

[U-Boot] [RESEND PATCH] common: add blkcache init
by Angelo Dureghello 21 Jan '20

21 Jan '20

From: Angelo Durgehello <angelo.dureghello(a)timesys.com> On m68k, block_cache list is relocated, but next and prev list pointers are not adjusted to the relocated struct list_head address, so the first iteration over the block_cache list hangs. This patch initializes the block_cache list after relocation. Signed-off-by: Angelo Durgehello <angelo.dureghello(a)timesys.com> --- common/board_r.c | 12 ++++++++++++ drivers/block/blkcache.c | 7 ++++++- include/blk.h | 6 ++++++ 3 files changed, 24 insertions(+), 1 deletion(-) diff --git a/common/board_r.c b/common/board_r.c index 65720849cd..13e70a5ffb 100644 --- a/common/board_r.c +++ b/common/board_r.c @@ -628,6 +628,15 @@ static int initr_bedbug(void) } #endif +#ifdef CONFIG_BLOCK_CACHE +static int initr_blkcache(void) +{ + blkcache_init(); + + return 0; +} +#endif + static int run_main_loop(void) { #ifdef CONFIG_SANDBOX @@ -832,6 +841,9 @@ static init_fnc_t init_sequence_r[] = { #endif #if defined(CONFIG_PRAM) initr_mem, +#endif +#ifdef CONFIG_BLOCK_CACHE + initr_blkcache, #endif run_main_loop, }; diff --git a/drivers/block/blkcache.c b/drivers/block/blkcache.c index 1fa64989d3..bf0fa1ea6f 100644 --- a/drivers/block/blkcache.c +++ b/drivers/block/blkcache.c @@ -21,13 +21,18 @@ struct block_cache_node { char *cache; }; -static LIST_HEAD(block_cache); +static struct list_head block_cache; static struct block_cache_stats _stats = { .max_blocks_per_entry = 8, .max_entries = 32 }; +void blkcache_init(void) +{ + INIT_LIST_HEAD(&block_cache); +} + static struct block_cache_node *cache_find(int iftype, int devnum, lbaint_t start, lbaint_t blkcnt, unsigned long blksz) diff --git a/include/blk.h b/include/blk.h index d0c033aece..7070fd6af3 100644 --- a/include/blk.h +++ b/include/blk.h @@ -113,6 +113,12 @@ struct blk_desc { (PAD_SIZE(size, blk_desc->blksz)) #if CONFIG_IS_ENABLED(BLOCK_CACHE) + +/** + * blkcache_init() - initialize the block cache list pointers + */ +void blkcache_init(void); + /** * blkcache_read() - attempt to read a set of blocks from cache * -- 2.24.0

2 2

Re: [PATCH v2 08/11] riscv: Add device tree for K210
by Rick Chen 21 Jan '20

21 Jan '20

Hi Sean, > From: Sean Anderson [mailto:seanga2@gmail.com] > Sent: Thursday, January 16, 2020 7:18 AM > To: U-Boot Mailing List > Cc: Rick Jian-Zhi Chen(陳建志) > Subject: [PATCH v2 08/11] riscv: Add device tree for K210 > > The subject for this patch should be > > Subject: [PATCH v2 08/11] riscv: Add device tree for K210 Lacking of contents. Thanks, Rick

1 0

Re: [PATCH v2 03/11] riscv: Add headers for asm/global_data.h
by Rick Chen 21 Jan '20

21 Jan '20

Hi Sean, > From: Sean Anderson [mailto:seanga2@gmail.com] > Sent: Thursday, January 16, 2020 6:51 AM > To: U-Boot Mailing List > Cc: Rick Jian-Zhi Chen(陳建志) > Subject: [PATCH v2 03/11] riscv: Add headers for asm/global_data.h > > This header depended on bd_t and ulong, but did not include the appropriate headers. > > Signed-off-by: Sean Anderson <seanga2(a)gmail.com> > --- > arch/riscv/include/asm/global_data.h | 2 ++ > 1 file changed, 2 insertions(+) > I wonder why the compiling is OK without those appropriate headers. Thanks, Rick > diff --git a/arch/riscv/include/asm/global_data.h b/arch/riscv/include/asm/global_data.h > index b74bd7e738..4f0c12b402 100644 > --- a/arch/riscv/include/asm/global_data.h > +++ b/arch/riscv/include/asm/global_data.h > @@ -11,6 +11,8 @@ > #define __ASM_GBL_DATA_H > > #include <asm/smp.h> > +#include <asm/u-boot.h> > +#include <linux/compiler.h> > > /* Architecture-specific global data */ struct arch_global_data { > -- > 2.24.1 >

2 1

Re: [PATCH v2 04/11] riscv: Add an option to default to RV64I
by Rick Chen 21 Jan '20

21 Jan '20

Hi Sean, > From: Sean Anderson [mailto:seanga2@gmail.com] > Sent: Thursday, January 16, 2020 6:52 AM > To: U-Boot Mailing List; Rick Jian-Zhi Chen(陳建志) > Subject: [PATCH v2 04/11] riscv: Add an option to default to RV64I > > This allows 64-bit boards to default to the 64-bit instruction set without changing the current default of 32-bit. > > Signed-off-by: Sean Anderson <seanga2(a)gmail.com> > --- > arch/riscv/Kconfig | 4 ++++ > 1 file changed, 4 insertions(+) > > diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig index 85e15ebffa..9a7b0334c2 100644 > --- a/arch/riscv/Kconfig > +++ b/arch/riscv/Kconfig > @@ -60,8 +60,12 @@ source "arch/riscv/cpu/generic/Kconfig" > > # architecture-specific options below > This is a redundant declaration. There have CONFIG_ARCH_RV64I=y already in sipeed_maix_bitm_defconfig Thanks, Rick > +config ARCH_DEFAULT_RV64I > + bool > + > choice > prompt "Base ISA" > + default ARCH_RV64I if ARCH_DEFAULT_RV64I > default ARCH_RV32I > > config ARCH_RV32I > -- > 2.24.1 >

1 0

[GIT PULL] TI patches for v2020.04
by Lokesh Vutla 21 Jan '20

21 Jan '20

Hi Tom, Please find the pull request for v2020.04 merge window containing TI specific changes. Travis-CI tests: https://travis-ci.org/lokeshvutla/u-boot/builds/639323217 Thanks and regards, Lokesh The following changes since commit 2d2f91a480f6849a8548414003d36fa030d434f1: Merge branch '2020-01-17-improve-aes-support' (2020-01-17 13:23:32 -0500) are available in the Git repository at: https://gitlab.denx.de/u-boot/custodians/u-boot-ti.git tags/2020-01-20-ti-2020.04 for you to fetch changes up to 1adea9cc03a73d43a8f5c88659fa163fe21b382b: arm: omap: fix MPU DPLL divisor for 800MHz clock (2020-01-20 10:10:29 +0530) ---------------------------------------------------------------- Below are major changes in this PR, segregated per SoC family: K3 J721E: * DMA support. * MMC and ADMA support. * EEPROM support. * J721e High Security EVM support. * USB DT nodes K3 AM654: * Fixed boot due to pmic probe error. * USB support and DT nodes. * ADMA support DRA7xx/AM57xx: * BBAI board support * Clean up of net platform code under board/ti AM33/AM43/Davinci: * Reduce SPL size for omap3 boards. * SPL DT support for da850-lcdk * PLL divider fix for AM335x ---------------------------------------------------------------- Adam Ford (3): ARM: dts: da850-lcdk: Update DTS files for SPL device tree support configs: omap3/35_logic and omap3/35_logic_somlv: Reduce SPL size ARM: dts: omap3/omap35 Torpedo and SOM-LV: Unify and shrink SPL dtb Andreas Dannenberg (3): ti: common: board_detect: Handle EEPROM probe more gracefully board: ti: j721e: Use EEPROM-based board detection arm64: dts: k3-j721e-common-proc-board: Fully enable wkup_i2c0 use Andrew F. Davis (10): defconfigs: am335x_hs_evm: Sync HS and non-HS defconfigs defconfigs: am43xx_hs_evm: Sync HS and non-HS defconfigs arm: mach-k3: Warn when node to disable is not found arm: mach-k3: security: Clean image out of cache before authentication configs: j721e_evm.h: Sync J721e environment configuration with AM65x configs: ti: Factor out call to 'args_mmc' into MMC common environment arm: K3: Fix header comment match AM6 specific file function arm: K3: Disable ROM configured firewalls arm: K3: Increase default SYSFW image size allocation configs: Add configs for J721e High Security EVM Caleb Robey (4): board: ti: beagleboneai: emmc read changes board: ti: beagleboneai: IODELAY and pinmux board: ti: beagleboneai: add initial support board: ti: beagleboneai: enable in am57xx_evm_defconfig Dario Binacchi (1): arm: omap: fix MPU DPLL divisor for 800MHz clock Faiz Abbas (9): thermal: ti-bandgap: Fix adc value datatype mmc: am654_sdhci: Get Xin clock by name mmc: am654_sdhci: Add Support for configuring PHY in J721e arm: dts: k3-j721e-common-proc-board: Remove voltage-ranges from sdhci nodes arm: dts: k3-j721e-common-proc-board: Add pinmux for SD card configs: j721e_evm: Add configs for ADMA Support configs: j721e_evm_a72: Add Support for GPT partitions configs: j721e_evm: Add configs for environment in eMMC configs: am65x_evm: Add Support for ADMA Grygorii Strashko (2): board: ti: dra7-evm: remove net platform code board: ti: am43xx: remove net platform code Jason Kridner (1): board: ti: beagleboneai: add dts file Keerthy (1): power: regulator: tps62360_regulator: Convert ofdata_to_platdata to the missing probe Lokesh Vutla (4): board: ti: j721e: Print board name and version during boot arm: dts: k3-am654-r5-base-board: Fix power-domains for wkup_vtm0 MAINTAINERS: Update ARM TI entry clk: sci-clk: add slack to clk-set-rate passed to firmware Sam Protsenko (1): arm: am57xx: env: Fix DFU variables Vignesh Raghavendra (21): environment: ti: Add DFU environment variables k3_dfu.h arm: dts: k3-j721e: Add DT nodes for USB configs: j721e_evm_a72_defconfig: Enable USB related configs lib: Import few bitmap functions from Linux dma: ti: k3-udma: Query DMA channels allocated from Resource Manager soc: ti: k3-navss-ringacc: Flush/invalidate caches on ring push/pop soc: ti: k3-navss-ringacc: Get SYSFW reference from DT phandle dma: ti: k3-udma: Remove coherency check for cache ops dma: ti: k3-udma: Fix debug prints during enabling MEM_TO_DEV transfers dma: ti: k3-udma: Switch to exposed ring mode dma: ti: k3-udma: Fix ring push operation for 32 bit cores dma: ti: k3-udma: Fix build warnings when building for 32 bit platforms configs: j721e_evm_a72_defconfig: Enable I2C and EEPROM support dwc3-generic: Add support for AM654 USB controller phy: omap-usb2-phy: Fix warnings when built for ARM64 phy: omap-usb2-phy: Add support for AM654 USB2 PHY arm: dts: k3-am65-main: add USB support arm: dts: k3-am654-base-board: enable USB1 configs: am65x_evm: Add DFU related env variables am65x_evm_a53_defconfig: Enable configs to support USB and DFU configs: am65x_evm: Enable USB keyboard as second stdin MAINTAINERS | 4 +- arch/arm/dts/Makefile | 1 + arch/arm/dts/am5729-beagleboneai.dts | 576 +++++++++++++++++++++ arch/arm/dts/da850-lcdk-u-boot.dtsi | 14 + arch/arm/dts/da850-lcdk.dts | 2 +- arch/arm/dts/k3-am65-main.dtsi | 78 +++ arch/arm/dts/k3-am654-base-board-u-boot.dtsi | 7 +- arch/arm/dts/k3-am654-base-board.dts | 28 + arch/arm/dts/k3-am654-r5-base-board.dts | 2 +- .../arm/dts/k3-j721e-common-proc-board-u-boot.dtsi | 26 + arch/arm/dts/k3-j721e-common-proc-board.dts | 74 ++- arch/arm/dts/k3-j721e-main.dtsi | 70 +++ arch/arm/dts/k3-j721e-r5-common-proc-board.dts | 23 + .../arm/dts/logicpd-som-lv-35xx-devkit-u-boot.dtsi | 28 + .../arm/dts/logicpd-som-lv-37xx-devkit-u-boot.dtsi | 8 + .../dts/logicpd-torpedo-35xx-devkit-u-boot.dtsi | 32 ++ .../dts/logicpd-torpedo-37xx-devkit-u-boot.dtsi | 8 +- arch/arm/mach-k3/Kconfig | 2 +- arch/arm/mach-k3/am6_init.c | 28 +- arch/arm/mach-k3/common.c | 34 +- arch/arm/mach-k3/common.h | 7 + arch/arm/mach-k3/include/mach/j721e_hardware.h | 3 + arch/arm/mach-k3/j721e_init.c | 55 ++ arch/arm/mach-k3/security.c | 12 + arch/arm/mach-omap2/am33xx/clock_am33xx.c | 2 +- arch/arm/mach-omap2/omap5/hw_data.c | 1 + board/ti/am43xx/board.c | 106 +--- board/ti/am57xx/board.c | 61 ++- board/ti/am57xx/mux_data.h | 280 ++++++++++ board/ti/am65x/evm.c | 4 +- board/ti/common/board_detect.c | 87 +++- board/ti/common/board_detect.h | 18 + board/ti/dra7xx/evm.c | 106 +--- board/ti/j721e/Kconfig | 7 + board/ti/j721e/evm.c | 264 ++++++++++ configs/am335x_hs_evm_defconfig | 13 +- configs/am335x_hs_evm_uart_defconfig | 13 +- configs/am43xx_hs_evm_defconfig | 15 + configs/am57xx_evm_defconfig | 3 +- configs/am65x_evm_a53_defconfig | 24 + configs/am65x_evm_r5_defconfig | 1 + configs/j721e_evm_a72_defconfig | 41 +- configs/j721e_evm_r5_defconfig | 7 +- configs/j721e_hs_evm_a72_defconfig | 155 ++++++ configs/j721e_hs_evm_r5_defconfig | 110 ++++ configs/omap35_logic_defconfig | 2 + configs/omap35_logic_somlv_defconfig | 2 + configs/omap3_logic_defconfig | 2 + configs/omap3_logic_somlv_defconfig | 2 + doc/git-mailrc | 3 +- drivers/clk/clk-ti-sci.c | 3 +- drivers/dma/ti/k3-udma.c | 364 ++++++++----- drivers/mmc/am654_sdhci.c | 129 +++-- drivers/phy/omap-usb2-phy.c | 22 +- drivers/power/regulator/tps62360_regulator.c | 4 +- drivers/soc/ti/k3-navss-ringacc.c | 14 +- drivers/thermal/ti-bandgap.c | 6 +- drivers/usb/dwc3/dwc3-generic.c | 1 + include/configs/am57xx_evm.h | 3 +- include/configs/am65x_evm.h | 11 +- include/configs/j721e_evm.h | 34 +- include/configs/ti_armv7_common.h | 1 - include/environment/ti/boot.h | 2 + include/environment/ti/k3_dfu.h | 46 ++ include/environment/ti/mmc.h | 5 +- include/linux/bitmap.h | 133 +++++ include/linux/bitops.h | 12 + 67 files changed, 2834 insertions(+), 407 deletions(-) create mode 100644 arch/arm/dts/am5729-beagleboneai.dts create mode 100644 configs/j721e_hs_evm_a72_defconfig create mode 100644 configs/j721e_hs_evm_r5_defconfig create mode 100644 include/environment/ti/k3_dfu.h -- 2.23.0

2 1

RE: [PULL] Pull request: u-boot-stm32 u-boot-stm32-20200117
by Patrick DELAUNAY 21 Jan '20

21 Jan '20

Hi Tom Please pull the first STM32 related patches for v2020.04 Gitlab CI status: https://gitlab.denx.de/u-boot/custodians/u-boot-stm/pipelines/1900 With the following fixes: - stm32mp1: split SOC and board and cleanup config It is a preliminary step for DH Electronics DHCOM SoM and PDK2 board Thanks, Patrick git request-pull origin/master https://gitlab.denx.de/u-boot/custodians/u-boot-stm.git u-boot-stm32-20200117 The following changes since commit d7bb6aceb2e99a832efbb96f9bf480bf95602192: Merge tag 'mmc-1-16-2020' of https://gitlab.denx.de/u-boot/custodians/u-boot-mmc (2020-01-16 13:20:51 -0500) are available in the Git repository at: https://gitlab.denx.de/u-boot/custodians/u-boot-stm.git tags/u-boot-stm32-20200117 for you to fetch changes up to db48e11b1eccf23f3f9ba26e886a798e74df6a01: ARM: dts: stm32: Add missing ETHCK clock to ethernet node (2020-01-17 16:26:42 +0100) ---------------------------------------------------------------- - stm32mp1: split SOC and board and cleanup config ---------------------------------------------------------------- Marek Vasut (4): ARM: stm32: Allow overriding setup_mac_address() stm32mp1: configs: Make all boot devices in distro boot conditional ARM: stm32: Fill in missing loadaddr ARM: dts: stm32: Add missing ETHCK clock to ethernet node Patrick Delaunay (3): stm32mp1: move stboard command in board/st/common directory board: stm32mp1: move CONFIG_ENV_XXX in defconfig stm32mp1: split board and SOC support for STM32MP15x family Thomas Hebb (1): stm32mp: remove redundant SYS_TEXT_BASE prompt arch/arm/dts/Makefile | 2 +- arch/arm/dts/stm32mp157c.dtsi | 2 ++ arch/arm/mach-stm32mp/Kconfig | 37 ++++++++++++++++++++++++------------- arch/arm/mach-stm32mp/cpu.c | 2 +- arch/arm/mach-stm32mp/include/mach/sys_proto.h | 2 ++ board/st/common/Kconfig | 7 +++++++ board/st/common/MAINTAINERS | 6 ++++++ board/st/common/Makefile | 6 ++++++ board/st/{stm32mp1 => common}/cmd_stboard.c | 3 +++ board/st/stm32mp1/Kconfig | 20 ++------------------ board/st/stm32mp1/Makefile | 1 - board/st/stm32mp1/stm32mp1.c | 2 +- configs/stm32mp15_basic_defconfig | 4 +++- configs/stm32mp15_optee_defconfig | 4 +++- configs/stm32mp15_trusted_defconfig | 4 +++- include/configs/stm32mp1.h | 39 +++++++++++++++++++++++++++++++-------- 16 files changed, 95 insertions(+), 46 deletions(-) create mode 100644 board/st/common/Kconfig create mode 100644 board/st/common/MAINTAINERS create mode 100644 board/st/common/Makefile rename board/st/{stm32mp1 => common}/cmd_stboard.c (98%)

2 2

[RFC 0/4] Support SDMA mode on RPI4 target - 32bit
by Jaehoon Chung 21 Jan '20

21 Jan '20

RPI4's SDHCI controller is supported SDMA mode. (Checked on kernel side) But It doesn't use on u-boot side. Then it's too slow about read/write performance. This patchset is supported SDMA mode on RPI4 target(32bit). - I didn't test on RPI4 64bit. Read/write time about 8MB file Before - Read : 1.472 seconds - Write : 4.690 seconds After - Read : 0.359 seconds - Write : 0.574 seconds Jaehoon Chung (4): mmc: bcm2835_sdhci: use phys2bus macro when dma address is accessed mmc: sdhci: add quriks relevant to broken SDMA mmc: bcm2835_sdhci: set SDHCI_QUIRK_BROKEN_SDMA flag configs: rpi_4_32b_defconfig: enable SDHCI_SDMA config configs/rpi_4_32b_defconfig | 1 + drivers/mmc/bcm2835_sdhci.c | 10 ++++++++-- drivers/mmc/sdhci.c | 10 ++++++++-- include/sdhci.h | 1 + 4 files changed, 18 insertions(+), 4 deletions(-) -- 2.25.0

3 8

[U-Boot] [PATCH] cmd/gpt: Address error cases during gpt rename more correctly
by Tom Rini 20 Jan '20

20 Jan '20

New analysis by the tool has shown that we have some cases where we weren't handling the error exit condition correctly. When we ran into the ENOMEM case we wouldn't exit the function and thus incorrect things could happen. Rework the unwinding such that we don't need a helper function now and free what we may have allocated. Fixes: 18030d04d25d ("GPT: fix memory leaks identified by Coverity") Reported-by: Coverity (CID: 275475, 275476) Cc: Alison Chaiken <alison(a)she-devel.com> Signed-off-by: Tom Rini <trini(a)konsulko.com> --- cmd/gpt.c | 35 ++++++++--------------------------- 1 file changed, 8 insertions(+), 27 deletions(-) diff --git a/cmd/gpt.c b/cmd/gpt.c index 0c4349f4b249..2da8df60dca3 100644 --- a/cmd/gpt.c +++ b/cmd/gpt.c @@ -633,21 +633,6 @@ static int do_disk_guid(struct blk_desc *dev_desc, char * const namestr) } #ifdef CONFIG_CMD_GPT_RENAME -/* - * There are 3 malloc() calls in set_gpt_info() and there is no info about which - * failed. - */ -static void set_gpt_cleanup(char **str_disk_guid, - disk_partition_t **partitions) -{ -#ifdef CONFIG_RANDOM_UUID - if (str_disk_guid) - free(str_disk_guid); -#endif - if (partitions) - free(partitions); -} - static int do_rename_gpt_parts(struct blk_desc *dev_desc, char *subcomm, char *name1, char *name2) { @@ -699,11 +684,7 @@ static int do_rename_gpt_parts(struct blk_desc *dev_desc, char *subcomm, &new_partitions, &part_count); if (ret < 0) { del_gpt_info(); - free(partitions_list); - if (ret == -ENOMEM) - set_gpt_cleanup(&str_disk_guid, &new_partitions); - else - goto out; + goto out; } if (!strcmp(subcomm, "swap")) { @@ -768,11 +749,7 @@ static int do_rename_gpt_parts(struct blk_desc *dev_desc, char *subcomm, */ if (ret < 0) { del_gpt_info(); - free(partitions_list); - if (ret == -ENOMEM) - set_gpt_cleanup(&str_disk_guid, &new_partitions); - else - goto out; + goto out; } debug("Writing new partition table\n"); @@ -797,8 +774,12 @@ static int do_rename_gpt_parts(struct blk_desc *dev_desc, char *subcomm, print_gpt_info(); del_gpt_info(); out: - free(new_partitions); - free(str_disk_guid); +#ifdef CONFIG_RANDOM_UUID + if (str_disk_guid) + free(str_disk_guid); +#endif + if (new_partitions) + free(new_partitions); free(partitions_list); return ret; } -- 2.17.1

2 2

[RFC 0/2] Import and use non-atomic bit-ops
by Alexey Brodkin 20 Jan '20

20 Jan '20

The following bitops are implemented pretty similarly for many arches and now when we faced a need in them on ARC I guess there's no point in copy-pasting them yet another time but instead it might be better re-use generic version from the Linux kernel. Since we had non of those bitops for ARC inclusion of imported header works perfectly fine. As for other arches I do see they use a bit different implementation but those might be just older versions etc. Sobefore breaking stuff for other arches I'd like to get some feedback from maintainers. Or we may just import proposed header and switch to its usage arch-by-arch whenever people feel kile cleaning-up their bitops. Alexey Brodkin (2): include: Import non-atomic.h from Linux ARC: Add support of bitops via generic implementation arch/arc/include/asm/bitops.h | 1 + include/asm-generic/bitops/non-atomic.h | 109 ++++++++++++++++++++++++++++++++ 2 files changed, 110 insertions(+) create mode 100644 include/asm-generic/bitops/non-atomic.h -- 2.16.2

2 3

[PATCH 1/5] ARM: stm32: Permit multiple board targets
by Marek Vasut 20 Jan '20

20 Jan '20

Setting TARGET_STM32MP1 in Kconfig always forces SYS_BOARD, SYS_VENDOR and SYS_CONFIG_NAME to values set by the ST reference platforms. Allow changing that by pulling out the TARGET_STM32MP157C_DK2 and making the ST reference platform settings conditional on TARGET_STM32MP157C_DK2 . Other platforms can now define a different TARGET_ and thus override the SYS_ settings in their Kconfig. Signed-off-by: Marek Vasut <marex(a)denx.de> Cc: Patrick Delaunay <patrick.delaunay(a)st.com> Cc: Patrice Chotard <patrice.chotard(a)st.com> --- board/st/stm32mp1/Kconfig | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/board/st/stm32mp1/Kconfig b/board/st/stm32mp1/Kconfig index 4fa2360b4f..c84aa41f06 100644 --- a/board/st/stm32mp1/Kconfig +++ b/board/st/stm32mp1/Kconfig @@ -1,4 +1,8 @@ -if TARGET_STM32MP1 +config TARGET_STM32MP157C_DK2 + bool "support of STMicroelectronics STM32MP157C-DK2 Discovery Board" + default y + +if TARGET_STM32MP157C_DK2 config SYS_BOARD default "stm32mp1" @@ -22,8 +26,4 @@ config CMD_STBOARD This compile the stboard command to read and write the board in the OTP. -config TARGET_STM32MP157C_DK2 - bool "support of STMicroelectronics STM32MP157C-DK2 Discovery Board" - default y - endif -- 2.24.1

4 24