January 2020 - U-Boot

[PATCH 1/4] mx6sabre_common: Remove FEC related settings
by Alifer Moraes 10 Feb '20

10 Feb '20

From: Fabio Estevam <festevam(a)gmail.com> In preparation for converting to DM_ETH and moving the FEC symbols to Kconfig we need to move the FEC definitions to mx6sabreauto.h and mx6sabresd.h to avoid build breakage during the conversion. Signed-off-by: Fabio Estevam <festevam(a)gmail.com> Signed-off-by: Alifer Moraes <alifer.wsdm(a)gmail.com> --- include/configs/mx6sabre_common.h | 8 -------- include/configs/mx6sabreauto.h | 8 ++++++++ include/configs/mx6sabresd.h | 9 +++++++++ 3 files changed, 17 insertions(+), 8 deletions(-) diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h index 9309e0320f..ee3b754910 100644 --- a/include/configs/mx6sabre_common.h +++ b/include/configs/mx6sabre_common.h @@ -20,14 +20,6 @@ /* MMC Configs */ #define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_FEC_MXC -#define IMX_FEC_BASE ENET_BASE_ADDR -#define CONFIG_FEC_XCV_TYPE RGMII -#define CONFIG_ETHPRIME "FEC" -#define CONFIG_FEC_MXC_PHYADDR 1 - -#define CONFIG_PHY_ATHEROS - #ifdef CONFIG_SUPPORT_EMMC_BOOT #define EMMC_ENV \ "emmcdev=2\0" \ diff --git a/include/configs/mx6sabreauto.h b/include/configs/mx6sabreauto.h index e444930dc8..c07b03984a 100644 --- a/include/configs/mx6sabreauto.h +++ b/include/configs/mx6sabreauto.h @@ -75,4 +75,12 @@ #define CONFIG_POWER_PFUZE100 #define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08 +#define CONFIG_FEC_MXC +#define IMX_FEC_BASE ENET_BASE_ADDR +#define CONFIG_FEC_XCV_TYPE RGMII +#define CONFIG_ETHPRIME "FEC" +#define CONFIG_FEC_MXC_PHYADDR 1 + +#define CONFIG_PHY_ATHEROS + #endif /* __MX6SABREAUTO_CONFIG_H */ diff --git a/include/configs/mx6sabresd.h b/include/configs/mx6sabresd.h index ec1537541a..d810202117 100644 --- a/include/configs/mx6sabresd.h +++ b/include/configs/mx6sabresd.h @@ -62,4 +62,13 @@ #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 /* Enabled USB controller number */ #endif +#define CONFIG_FEC_MXC +#define IMX_FEC_BASE ENET_BASE_ADDR +#define CONFIG_FEC_XCV_TYPE RGMII +#define CONFIG_ETHPRIME "FEC" +#define CONFIG_FEC_MXC_PHYADDR 1 + +#define CONFIG_PHY_ATHEROS + + #endif /* __MX6SABRESD_CONFIG_H */ -- 2.17.1

4 9

[U-Boot, 00/13] board: ge: complete DM conversion
by Ian Ray 10 Feb '20

10 Feb '20

This series finishes the conversion to DM mode for drivers used on GE boards. The first patch adds the ability to specify partitions for eeprom in the device tree, and query eeprom device sizes. Each partition creates a child device, allowing board code to find the eeprom parition by name. This feature is used in the second and third patches. The bulk of the work is for converting i2c board code to DM driver accesses for the various drivers. Ian Ray (4): board: ge: mx53ppd: enable DM_VIDEO board: ge: bx50v3: override panel board: ge: mx53ppd: use DM for uart board: ge: bx50v3, imx53ppd: configure CONFIG_SYS_BOOTMAPSZ Robert Beckett (9): misc: i2c_eeprom: set offset len and chip addr offset mask board: ge: bx50v3, imx53ppd: add eeprom partitions board: ge: bx50v3, imx53ppd: use DM I2C board: ge: bx50v3: add i2c eeprom bootcount storage board: ge: mx53ppd: add i2c eeprom bootcount storage board: ge: bx50v3: Enable DM PWM for backlight board: ge: mx53ppd: Use DM for ethernet board: ge: bx50v3: use DM for uart board: ge: bx50v3, mx53ppd: fix firstboot detection arch/arm/dts/imx53-ppd-uboot.dtsi | 46 ++++++++ arch/arm/dts/imx53-ppd.dts | 5 +- arch/arm/dts/imx6q-b450v3.dts | 2 + arch/arm/dts/imx6q-b650v3.dts | 2 + arch/arm/dts/imx6q-b850v3.dts | 2 + arch/arm/dts/imx6q-bx50v3-uboot.dtsi | 25 ++++ arch/arm/dts/imx6q-bx50v3.dtsi | 3 +- board/ge/bx50v3/Kconfig | 2 - board/ge/bx50v3/bx50v3.c | 219 ++++++----------------------------- board/ge/common/Kconfig | 14 --- board/ge/common/ge_common.c | 17 +-- board/ge/common/vpd_reader.c | 37 +++--- board/ge/mx53ppd/Kconfig | 2 - board/ge/mx53ppd/Makefile | 2 +- board/ge/mx53ppd/mx53ppd.c | 67 +---------- board/ge/mx53ppd/mx53ppd_video.c | 125 +++++++------------- board/ge/mx53ppd/ppd_gpio.h | 8 -- configs/ge_bx50v3_defconfig | 27 ++++- configs/mx53ppd_defconfig | 31 +++-- drivers/misc/i2c_eeprom.c | 35 ++++++ include/configs/ge_bx50v3.h | 49 ++------ include/configs/mx53ppd.h | 76 ++---------- 22 files changed, 295 insertions(+), 501 deletions(-) delete mode 100644 board/ge/common/Kconfig -- 2.10.1

2 26

[PATCH] cmd: mdc/mwc: normalize disjoint MX_CYCLIC usage
by Joel Johnson 10 Feb '20

10 Feb '20

Both CMD_MX_CYCLIC and MX_CYCLIC are in use and defined in Kconfig, but only the non-CMD version currently does anything. This changes all usages to prefer the CMD_MX_CYCLIC option (since it's only affecting addition of the commands), and switches defconfigs using the non-CMD version to use the CMD version. Signed-off-by: Joel Johnson <mrjoel(a)lixil.net> --- README | 2 +- cmd/Kconfig | 8 +------- cmd/mem.c | 8 ++++---- configs/M5249EVB_defconfig | 2 +- configs/amcore_defconfig | 2 +- configs/bcm11130_defconfig | 2 +- configs/bcm11130_nand_defconfig | 2 +- configs/bcm23550_w1d_defconfig | 2 +- configs/bcm28155_ap_defconfig | 2 +- configs/bcm28155_w1d_defconfig | 2 +- configs/bcm911360_entphn-ns_defconfig | 2 +- configs/bcm911360_entphn_defconfig | 2 +- configs/bcm911360k_defconfig | 2 +- configs/bcm958300k-ns_defconfig | 2 +- configs/bcm958300k_defconfig | 2 +- configs/bcm958305k_defconfig | 2 +- configs/bcm958622hr_defconfig | 2 +- configs/da850evm_defconfig | 2 +- configs/da850evm_direct_nor_defconfig | 2 +- configs/da850evm_nand_defconfig | 2 +- configs/k2e_evm_defconfig | 2 +- configs/k2e_hs_evm_defconfig | 2 +- configs/k2g_evm_defconfig | 2 +- configs/k2g_hs_evm_defconfig | 2 +- configs/k2hk_evm_defconfig | 2 +- configs/k2hk_hs_evm_defconfig | 2 +- configs/k2l_evm_defconfig | 2 +- configs/k2l_hs_evm_defconfig | 2 +- configs/legoev3_defconfig | 2 +- configs/omapl138_lcdk_defconfig | 2 +- configs/x600_defconfig | 2 +- configs/xtfpga_defconfig | 2 +- 32 files changed, 35 insertions(+), 41 deletions(-) diff --git a/README b/README index c1324c1296..8cfa92fac9 100644 --- a/README +++ b/README @@ -3025,7 +3025,7 @@ Low Level (hardware related) configuration options: Add the "loopw" memory command. This only takes effect if the memory commands are activated globally (CONFIG_CMD_MEMORY). -- CONFIG_MX_CYCLIC +- CONFIG_CMD_MX_CYCLIC Add the "mdc" and "mwc" memory commands. These are cyclic "md/mw" commands. Examples: diff --git a/cmd/Kconfig b/cmd/Kconfig index 6e1efaaf85..cbdbd9538b 100644 --- a/cmd/Kconfig +++ b/cmd/Kconfig @@ -692,7 +692,7 @@ config CMD_MEMORY base - print or set address offset loop - initialize loop on address range -config MX_CYCLIC +config CMD_MX_CYCLIC bool "Enable cyclic md/mw commands" depends on CMD_MEMORY help @@ -727,12 +727,6 @@ config SYS_ALT_MEMTEST endif -config CMD_MX_CYCLIC - bool "mdc, mwc" - help - mdc - memory display cyclic - mwc - memory write cyclic - config CMD_SHA1SUM bool "sha1sum" select SHA1 diff --git a/cmd/mem.c b/cmd/mem.c index f32985ca7d..6d54f19527 100644 --- a/cmd/mem.c +++ b/cmd/mem.c @@ -165,7 +165,7 @@ static int do_mem_mw(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return 0; } -#ifdef CONFIG_MX_CYCLIC +#ifdef CONFIG_CMD_MX_CYCLIC static int do_mem_mdc(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { int i; @@ -219,7 +219,7 @@ static int do_mem_mwc(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return 0; } -#endif /* CONFIG_MX_CYCLIC */ +#endif /* CONFIG_CMD_MX_CYCLIC */ static int do_mem_cmp(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { @@ -1270,7 +1270,7 @@ U_BOOT_CMD( ); #endif /* CONFIG_CMD_MEMTEST */ -#ifdef CONFIG_MX_CYCLIC +#ifdef CONFIG_CMD_MX_CYCLIC U_BOOT_CMD( mdc, 4, 1, do_mem_mdc, "memory display cyclic", @@ -1290,7 +1290,7 @@ U_BOOT_CMD( "[.b, .w, .l] address value delay(ms)" #endif ); -#endif /* CONFIG_MX_CYCLIC */ +#endif /* CONFIG_CMD_MX_CYCLIC */ #ifdef CONFIG_CMD_MEMINFO U_BOOT_CMD( diff --git a/configs/M5249EVB_defconfig b/configs/M5249EVB_defconfig index 39c4976e0d..12db389b69 100644 --- a/configs/M5249EVB_defconfig +++ b/configs/M5249EVB_defconfig @@ -9,7 +9,7 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_AUTOBOOT is not set CONFIG_CMD_IMLS=y CONFIG_LOOPW=y -CONFIG_MX_CYCLIC=y +CONFIG_CMD_MX_CYCLIC=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_CACHE=y CONFIG_DEFAULT_DEVICE_TREE="M5249EVB" diff --git a/configs/amcore_defconfig b/configs/amcore_defconfig index 78e2d1da05..dd357bf3da 100644 --- a/configs/amcore_defconfig +++ b/configs/amcore_defconfig @@ -14,7 +14,7 @@ CONFIG_SYS_PROMPT="amcore $ " CONFIG_CMD_IMLS=y # CONFIG_CMD_XIMG is not set CONFIG_LOOPW=y -CONFIG_MX_CYCLIC=y +CONFIG_CMD_MX_CYCLIC=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_CACHE=y CONFIG_CMD_TIMER=y diff --git a/configs/bcm11130_defconfig b/configs/bcm11130_defconfig index a5dfe4b764..8510cc272f 100644 --- a/configs/bcm11130_defconfig +++ b/configs/bcm11130_defconfig @@ -13,7 +13,7 @@ CONFIG_HUSH_PARSER=y # CONFIG_AUTOBOOT is not set CONFIG_CMD_BOOTZ=y CONFIG_CMD_ASKENV=y -CONFIG_MX_CYCLIC=y +CONFIG_CMD_MX_CYCLIC=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y diff --git a/configs/bcm11130_nand_defconfig b/configs/bcm11130_nand_defconfig index 8005feda52..5d5598d949 100644 --- a/configs/bcm11130_nand_defconfig +++ b/configs/bcm11130_nand_defconfig @@ -12,7 +12,7 @@ CONFIG_HUSH_PARSER=y # CONFIG_AUTOBOOT is not set CONFIG_CMD_BOOTZ=y CONFIG_CMD_ASKENV=y -CONFIG_MX_CYCLIC=y +CONFIG_CMD_MX_CYCLIC=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y diff --git a/configs/bcm23550_w1d_defconfig b/configs/bcm23550_w1d_defconfig index 00b23da451..2fd0ec24b2 100644 --- a/configs/bcm23550_w1d_defconfig +++ b/configs/bcm23550_w1d_defconfig @@ -15,7 +15,7 @@ CONFIG_VERSION_VARIABLE=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_ASKENV=y -CONFIG_MX_CYCLIC=y +CONFIG_CMD_MX_CYCLIC=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y diff --git a/configs/bcm28155_ap_defconfig b/configs/bcm28155_ap_defconfig index fb66b3a1ea..dfc166bccb 100644 --- a/configs/bcm28155_ap_defconfig +++ b/configs/bcm28155_ap_defconfig @@ -14,7 +14,7 @@ CONFIG_HUSH_PARSER=y # CONFIG_AUTOBOOT is not set CONFIG_CMD_BOOTZ=y CONFIG_CMD_ASKENV=y -CONFIG_MX_CYCLIC=y +CONFIG_CMD_MX_CYCLIC=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y diff --git a/configs/bcm28155_w1d_defconfig b/configs/bcm28155_w1d_defconfig index 2a0ff8c2e7..3e11f0c221 100644 --- a/configs/bcm28155_w1d_defconfig +++ b/configs/bcm28155_w1d_defconfig @@ -13,7 +13,7 @@ CONFIG_HUSH_PARSER=y # CONFIG_AUTOBOOT is not set CONFIG_CMD_BOOTZ=y CONFIG_CMD_ASKENV=y -CONFIG_MX_CYCLIC=y +CONFIG_CMD_MX_CYCLIC=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y diff --git a/configs/bcm911360_entphn-ns_defconfig b/configs/bcm911360_entphn-ns_defconfig index 6827439f54..cca6558c5b 100644 --- a/configs/bcm911360_entphn-ns_defconfig +++ b/configs/bcm911360_entphn-ns_defconfig @@ -12,7 +12,7 @@ CONFIG_HUSH_PARSER=y # CONFIG_AUTOBOOT is not set CONFIG_CMD_BOOTZ=y CONFIG_CMD_ASKENV=y -CONFIG_MX_CYCLIC=y +CONFIG_CMD_MX_CYCLIC=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/bcm911360_entphn_defconfig b/configs/bcm911360_entphn_defconfig index d4c4b305b3..710d02599d 100644 --- a/configs/bcm911360_entphn_defconfig +++ b/configs/bcm911360_entphn_defconfig @@ -12,7 +12,7 @@ CONFIG_HUSH_PARSER=y # CONFIG_AUTOBOOT is not set CONFIG_CMD_BOOTZ=y CONFIG_CMD_ASKENV=y -CONFIG_MX_CYCLIC=y +CONFIG_CMD_MX_CYCLIC=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/bcm911360k_defconfig b/configs/bcm911360k_defconfig index 11f24ab2e0..6ff9bb7341 100644 --- a/configs/bcm911360k_defconfig +++ b/configs/bcm911360k_defconfig @@ -12,7 +12,7 @@ CONFIG_HUSH_PARSER=y # CONFIG_AUTOBOOT is not set CONFIG_CMD_BOOTZ=y CONFIG_CMD_ASKENV=y -CONFIG_MX_CYCLIC=y +CONFIG_CMD_MX_CYCLIC=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/bcm958300k-ns_defconfig b/configs/bcm958300k-ns_defconfig index 8a6463380b..19eca9d5df 100644 --- a/configs/bcm958300k-ns_defconfig +++ b/configs/bcm958300k-ns_defconfig @@ -12,7 +12,7 @@ CONFIG_HUSH_PARSER=y # CONFIG_AUTOBOOT is not set CONFIG_CMD_BOOTZ=y CONFIG_CMD_ASKENV=y -CONFIG_MX_CYCLIC=y +CONFIG_CMD_MX_CYCLIC=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/bcm958300k_defconfig b/configs/bcm958300k_defconfig index 11f24ab2e0..6ff9bb7341 100644 --- a/configs/bcm958300k_defconfig +++ b/configs/bcm958300k_defconfig @@ -12,7 +12,7 @@ CONFIG_HUSH_PARSER=y # CONFIG_AUTOBOOT is not set CONFIG_CMD_BOOTZ=y CONFIG_CMD_ASKENV=y -CONFIG_MX_CYCLIC=y +CONFIG_CMD_MX_CYCLIC=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/bcm958305k_defconfig b/configs/bcm958305k_defconfig index 11f24ab2e0..6ff9bb7341 100644 --- a/configs/bcm958305k_defconfig +++ b/configs/bcm958305k_defconfig @@ -12,7 +12,7 @@ CONFIG_HUSH_PARSER=y # CONFIG_AUTOBOOT is not set CONFIG_CMD_BOOTZ=y CONFIG_CMD_ASKENV=y -CONFIG_MX_CYCLIC=y +CONFIG_CMD_MX_CYCLIC=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/bcm958622hr_defconfig b/configs/bcm958622hr_defconfig index b18690a9db..ee6eb9109f 100644 --- a/configs/bcm958622hr_defconfig +++ b/configs/bcm958622hr_defconfig @@ -13,7 +13,7 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_ASKENV=y CONFIG_CRC32_VERIFY=y -CONFIG_MX_CYCLIC=y +CONFIG_CMD_MX_CYCLIC=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_CACHE=y CONFIG_CMD_TIME=y diff --git a/configs/da850evm_defconfig b/configs/da850evm_defconfig index cf6913e38e..bee44a076f 100644 --- a/configs/da850evm_defconfig +++ b/configs/da850evm_defconfig @@ -33,7 +33,7 @@ CONFIG_SYS_SPI_U_BOOT_OFFS=0x8000 CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="U-Boot > " CONFIG_CRC32_VERIFY=y -CONFIG_MX_CYCLIC=y +CONFIG_CMD_MX_CYCLIC=y CONFIG_CMD_DM=y # CONFIG_CMD_FLASH is not set # CONFIG_CMD_GPT is not set diff --git a/configs/da850evm_direct_nor_defconfig b/configs/da850evm_direct_nor_defconfig index eeea023145..ab86108d66 100644 --- a/configs/da850evm_direct_nor_defconfig +++ b/configs/da850evm_direct_nor_defconfig @@ -24,7 +24,7 @@ CONFIG_SYS_PROMPT="U-Boot > " # CONFIG_CMD_BOOTZ is not set CONFIG_CMD_IMLS=y CONFIG_CRC32_VERIFY=y -CONFIG_MX_CYCLIC=y +CONFIG_CMD_MX_CYCLIC=y CONFIG_CMD_DM=y # CONFIG_CMD_GPT is not set # CONFIG_CMD_MMC is not set diff --git a/configs/da850evm_nand_defconfig b/configs/da850evm_nand_defconfig index d09d4ec27d..226b201272 100644 --- a/configs/da850evm_nand_defconfig +++ b/configs/da850evm_nand_defconfig @@ -31,7 +31,7 @@ CONFIG_SYS_SPI_U_BOOT_OFFS=0x8000 CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="U-Boot > " CONFIG_CRC32_VERIFY=y -CONFIG_MX_CYCLIC=y +CONFIG_CMD_MX_CYCLIC=y CONFIG_CMD_DM=y # CONFIG_CMD_FLASH is not set # CONFIG_CMD_GPT is not set diff --git a/configs/k2e_evm_defconfig b/configs/k2e_evm_defconfig index b073acd8f7..29334c4185 100644 --- a/configs/k2e_evm_defconfig +++ b/configs/k2e_evm_defconfig @@ -25,7 +25,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x10000 -CONFIG_MX_CYCLIC=y +CONFIG_CMD_MX_CYCLIC=y # CONFIG_CMD_FLASH is not set # CONFIG_CMD_GPIO is not set # CONFIG_CMD_GPT is not set diff --git a/configs/k2e_hs_evm_defconfig b/configs/k2e_hs_evm_defconfig index 6a8a4975eb..87050ef489 100644 --- a/configs/k2e_hs_evm_defconfig +++ b/configs/k2e_hs_evm_defconfig @@ -17,7 +17,7 @@ CONFIG_OF_BOARD_SETUP=y CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_VERSION_VARIABLE=y CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_MX_CYCLIC=y +CONFIG_CMD_MX_CYCLIC=y # CONFIG_CMD_FLASH is not set # CONFIG_CMD_GPIO is not set # CONFIG_CMD_GPT is not set diff --git a/configs/k2g_evm_defconfig b/configs/k2g_evm_defconfig index d45f07526e..5abf5faa45 100644 --- a/configs/k2g_evm_defconfig +++ b/configs/k2g_evm_defconfig @@ -24,7 +24,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x10000 -CONFIG_MX_CYCLIC=y +CONFIG_CMD_MX_CYCLIC=y # CONFIG_CMD_FLASH is not set # CONFIG_CMD_GPIO is not set # CONFIG_CMD_GPT is not set diff --git a/configs/k2g_hs_evm_defconfig b/configs/k2g_hs_evm_defconfig index 2df761ecab..a530ba0357 100644 --- a/configs/k2g_hs_evm_defconfig +++ b/configs/k2g_hs_evm_defconfig @@ -16,7 +16,7 @@ CONFIG_OF_BOARD_SETUP=y CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_VERSION_VARIABLE=y CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_MX_CYCLIC=y +CONFIG_CMD_MX_CYCLIC=y # CONFIG_CMD_FLASH is not set # CONFIG_CMD_GPIO is not set # CONFIG_CMD_GPT is not set diff --git a/configs/k2hk_evm_defconfig b/configs/k2hk_evm_defconfig index f948e24982..4cd8647d0f 100644 --- a/configs/k2hk_evm_defconfig +++ b/configs/k2hk_evm_defconfig @@ -25,7 +25,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x10000 -CONFIG_MX_CYCLIC=y +CONFIG_CMD_MX_CYCLIC=y # CONFIG_CMD_FLASH is not set # CONFIG_CMD_GPIO is not set # CONFIG_CMD_GPT is not set diff --git a/configs/k2hk_hs_evm_defconfig b/configs/k2hk_hs_evm_defconfig index e0acf3ac17..bd60aa86a3 100644 --- a/configs/k2hk_hs_evm_defconfig +++ b/configs/k2hk_hs_evm_defconfig @@ -17,7 +17,7 @@ CONFIG_OF_BOARD_SETUP=y CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_VERSION_VARIABLE=y CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_MX_CYCLIC=y +CONFIG_CMD_MX_CYCLIC=y # CONFIG_CMD_FLASH is not set # CONFIG_CMD_GPIO is not set # CONFIG_CMD_GPT is not set diff --git a/configs/k2l_evm_defconfig b/configs/k2l_evm_defconfig index b2baeaaf2f..b564b23dca 100644 --- a/configs/k2l_evm_defconfig +++ b/configs/k2l_evm_defconfig @@ -25,7 +25,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x10000 -CONFIG_MX_CYCLIC=y +CONFIG_CMD_MX_CYCLIC=y # CONFIG_CMD_FLASH is not set # CONFIG_CMD_GPIO is not set # CONFIG_CMD_GPT is not set diff --git a/configs/k2l_hs_evm_defconfig b/configs/k2l_hs_evm_defconfig index d7210df133..3fad15f121 100644 --- a/configs/k2l_hs_evm_defconfig +++ b/configs/k2l_hs_evm_defconfig @@ -16,7 +16,7 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_VERSION_VARIABLE=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y -CONFIG_MX_CYCLIC=y +CONFIG_CMD_MX_CYCLIC=y # CONFIG_CMD_FLASH is not set # CONFIG_CMD_GPIO is not set # CONFIG_CMD_GPT is not set diff --git a/configs/legoev3_defconfig b/configs/legoev3_defconfig index 783ba17019..c0c3727a95 100644 --- a/configs/legoev3_defconfig +++ b/configs/legoev3_defconfig @@ -15,7 +15,7 @@ CONFIG_AUTOBOOT_PROMPT="Autoboot in %d seconds - press 'l' to stop...\n" CONFIG_AUTOBOOT_STOP_STR="l" CONFIG_CMD_ASKENV=y CONFIG_CRC32_VERIFY=y -CONFIG_MX_CYCLIC=y +CONFIG_CMD_MX_CYCLIC=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_MMC=y CONFIG_CMD_SPI=y diff --git a/configs/omapl138_lcdk_defconfig b/configs/omapl138_lcdk_defconfig index acef2c7e01..50cf09c7f1 100644 --- a/configs/omapl138_lcdk_defconfig +++ b/configs/omapl138_lcdk_defconfig @@ -30,7 +30,7 @@ CONFIG_SPL_NAND_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CRC32_VERIFY=y # CONFIG_CMD_EEPROM is not set -CONFIG_MX_CYCLIC=y +CONFIG_CMD_MX_CYCLIC=y CONFIG_CMD_DM=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_NAND=y diff --git a/configs/x600_defconfig b/configs/x600_defconfig index cb37f5254b..9f35d7a4ad 100644 --- a/configs/x600_defconfig +++ b/configs/x600_defconfig @@ -27,7 +27,7 @@ CONFIG_AUTOBOOT_PROMPT="Hit SPACE in %d seconds to stop autoboot.\n" CONFIG_AUTOBOOT_STOP_STR=" " CONFIG_CMD_IMLS=y CONFIG_LOOPW=y -CONFIG_MX_CYCLIC=y +CONFIG_CMD_MX_CYCLIC=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_NAND=y diff --git a/configs/xtfpga_defconfig b/configs/xtfpga_defconfig index 1911cdadaf..21ad5b663c 100644 --- a/configs/xtfpga_defconfig +++ b/configs/xtfpga_defconfig @@ -15,7 +15,7 @@ CONFIG_AUTOBOOT_STOP_STR=" " CONFIG_CMD_IMLS=y CONFIG_CMD_ASKENV=y CONFIG_CRC32_VERIFY=y -CONFIG_MX_CYCLIC=y +CONFIG_CMD_MX_CYCLIC=y CONFIG_CMD_SAVES=y CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y -- 2.20.1

3 2

[PATCH v3 0/7] board: toradex: prepare and add Verdin iMX8M Mini support
by Marcel Ziswiler 10 Feb '20

10 Feb '20

Some preparational steps and then adding initial minimal support for the Toradex Verdin iMX8M Mini Quad 2GB WB IT V1.0A module. They are now strapped to boot from eFuses which are factory fused to properly boot from their on-module eMMC. U-Boot supports booting from the on-module eMMC only, SDP support is disabled for now due to missing i.MX 8M Mini USB support. Functionality wise the following is known to be working: - eMMC, 8-bit and 4-bit MMC/SD card slots - Ethernet - GPIOs - I2C Boot sequence is: SPL ---> ATF (TF-A) ---> U-boot proper ATF, U-boot proper and u-boot.dtb images are packed into a FIT image, loaded by SPL. Boot: U-Boot SPL 2020.01-00187-gd411d164e5 (Jan 26 2020 - 04:47:26 +0100) Normal Boot Trying to boot from MMC1 NOTICE: Configuring TZASC380 NOTICE: RDC off NOTICE: BL31: v2.0(release):rel_imx_4.14.98_2.3.0-0-g09c5cc994-dirty NOTICE: BL31: Built : 01:11:41, Jan 25 2020 NOTICE: sip svc init U-Boot 2020.01-00187-gd411d164e5 (Jan 26 2020 - 04:47:26 +0100) CPU: Freescale i.MX8MMQ rev1.0 at 0 MHz Reset cause: POR DRAM: 2 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial Out: serial Err: serial Model: Toradex Verdin iMX8M Mini Quad 2GB Wi-Fi / BT IT V1.0A, Serial# 06535149 Net: eth0: ethernet@30be0000 Hit any key to stop autoboot: 0 Verdin iMX8MM # Changes in v3: - Drop pinfunc patches and just sync with linux-next as suggested by Fabio, Frieder and Oleksandr. - Drop AG resp. Inc. in copyright notices as adviced by our legal. - Add Oleksandr's reviewed-by tags. - Add missing config block information for Verdin iMX8M Nano as well. - Use pin names from the linux-next pinfunc sync as suggested by Oleksandr. Changes in v2: - Newly added this patch to the series splitting Verdin one as suggested by Oleksandr. - Split Apalis iMX8X off from this one as suggested by Oleksandr. - Further clean-up as announced on the mailing list. - Update cover letter with updated SKU naming and few clarifications. Igor Opaniuk (3): board: toradex: Add Verdin iMX8M Mini support board: toradex: verdin-imx8mm: add README board: toradex: verdin-imx8mm: add MAINTAINERS Marcel Ziswiler (4): arm: dts: imx8mm-pinfunc: sync latest linux-next pin func header toradex: tdx-cfg-block: add Apalis iMX8X support toradex: tdx-cfg-block: add Verdin iMX8M Mini/Nano support imx: imx8mm_evk: spelling in readme file arch/arm/dts/Makefile | 1 + arch/arm/dts/imx8mm-pinfunc.h | 20 +- arch/arm/dts/imx8mm-verdin-u-boot.dtsi | 103 ++ arch/arm/dts/imx8mm-verdin.dts | 1007 ++++++++++ arch/arm/mach-imx/imx8m/Kconfig | 7 + board/freescale/imx8mm_evk/README | 2 +- board/toradex/common/tdx-cfg-block.c | 39 +- board/toradex/common/tdx-cfg-block.h | 7 +- board/toradex/verdin-imx8mm/Kconfig | 30 + board/toradex/verdin-imx8mm/MAINTAINERS | 9 + board/toradex/verdin-imx8mm/Makefile | 11 + board/toradex/verdin-imx8mm/README | 88 + board/toradex/verdin-imx8mm/imximage.cfg | 16 + board/toradex/verdin-imx8mm/lpddr4_timing.c | 1850 +++++++++++++++++++ board/toradex/verdin-imx8mm/spl.c | 180 ++ board/toradex/verdin-imx8mm/verdin-imx8mm.c | 73 + configs/verdin-imx8mm_defconfig | 98 + include/configs/verdin-imx8mm.h | 128 ++ 18 files changed, 3662 insertions(+), 7 deletions(-) create mode 100644 arch/arm/dts/imx8mm-verdin-u-boot.dtsi create mode 100644 arch/arm/dts/imx8mm-verdin.dts create mode 100644 board/toradex/verdin-imx8mm/Kconfig create mode 100644 board/toradex/verdin-imx8mm/MAINTAINERS create mode 100644 board/toradex/verdin-imx8mm/Makefile create mode 100644 board/toradex/verdin-imx8mm/README create mode 100644 board/toradex/verdin-imx8mm/imximage.cfg create mode 100644 board/toradex/verdin-imx8mm/lpddr4_timing.c create mode 100644 board/toradex/verdin-imx8mm/spl.c create mode 100644 board/toradex/verdin-imx8mm/verdin-imx8mm.c create mode 100644 configs/verdin-imx8mm_defconfig create mode 100644 include/configs/verdin-imx8mm.h -- 2.24.1

4 16

[PATCH V2 1/4] warp7: Fix the pmic_get() parameter in the DM case
by Joris Offouga 10 Feb '20

10 Feb '20

When pmic_get() is used with DM the first parameter must be the complete node name plus the unit address, so fix it accordingly Signed-off-by: Joris Offouga <offougajoris(a)gmail.com> Reviewed-by: Fabio Estevam <festevam(a)gmail.com> --- changes v1->v2: add commit log change commit message add reviewed board/warp7/warp7.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/board/warp7/warp7.c b/board/warp7/warp7.c index 9efc62f2fb..1ebec93916 100644 --- a/board/warp7/warp7.c +++ b/board/warp7/warp7.c @@ -67,7 +67,7 @@ int power_init_board(void) struct udevice *dev; int ret, dev_id, rev_id; - ret = pmic_get("pfuze3000", &dev); + ret = pmic_get("pfuze3000@8", &dev); if (ret == -ENODEV) return 0; if (ret != 0) -- 2.20.1

3 10

[PATCH v1 0/5] arm: xea: Enhancements for i.MX28 based XEA board
by Lukasz Majewski 10 Feb '20

10 Feb '20

This patch set provides some enhancements for i.MX28 based XEA board. The most notably one is the ethaddr setup for L2 switch based design and the code to very early enable fec regulator. Lukasz Majewski (5): arm: xea: defconfig: Define space for redundant envs in SPI-NOR flash arm: xea: Provide function to set L2 switch 'local-mac-address' property arm: xea: config: Enable support for XEA board specific device tree tweaks arm: xea: spl: Add GPIO0_0 setup on spl_board_init arm: xea: dts: Add 'fec-3v3' regulator properties to prevent accidental disablement arch/arm/dts/imx28-xea.dts | 2 ++ board/liebherr/xea/xea.c | 49 ++++++++++++++++++++++++++++++++++++- configs/imx28_xea_defconfig | 3 +++ 3 files changed, 53 insertions(+), 1 deletion(-) -- 2.20.1

2 10

[PATCH 1/3] ARM: imx: novena: Move defconfig bits to arch Kconfig
by Marek Vasut 10 Feb '20

10 Feb '20

Just move the defconfig entries which are required into the Novena entry in arch Kconfig, no functional change. Signed-off-by: Marek Vasut <marex(a)denx.de> Cc: Fabio Estevam <fabio.estevam(a)nxp.com> Cc: Stefano Babic <sbabic(a)denx.de> Cc: Vagrant Cascadian <vagrant(a)debian.org> --- arch/arm/mach-imx/mx6/Kconfig | 8 ++++++++ configs/novena_defconfig | 8 -------- 2 files changed, 8 insertions(+), 8 deletions(-) diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig index 9d91f9ab44..811c41d906 100644 --- a/arch/arm/mach-imx/mx6/Kconfig +++ b/arch/arm/mach-imx/mx6/Kconfig @@ -259,7 +259,15 @@ config TARGET_GW_VENTANA config TARGET_KOSAGI_NOVENA bool "Kosagi Novena" select BOARD_LATE_INIT + select DM_GPIO + select DM_MMC + select DM_PCI + select DM_SCSI + select DM_USB + select DM_VIDEO + select OF_CONTROL select SUPPORT_SPL + imply CMD_DM config TARGET_MCCMON6 bool "mccmon6" diff --git a/configs/novena_defconfig b/configs/novena_defconfig index f14f82b9a6..2fd89b2939 100644 --- a/configs/novena_defconfig +++ b/configs/novena_defconfig @@ -8,7 +8,6 @@ CONFIG_MX6_DDRCAL=y CONFIG_TARGET_KOSAGI_NOVENA=y CONFIG_ENV_SIZE=0x4000 CONFIG_ENV_OFFSET=0x80000 -CONFIG_DM_GPIO=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_NR_DRAM_BANKS=1 @@ -33,7 +32,6 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_CMD_ASKENV=y CONFIG_CMD_EEPROM=y -CONFIG_CMD_DM=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y @@ -44,7 +42,6 @@ CONFIG_CMD_CACHE=y CONFIG_CMD_TIME=y CONFIG_CMD_EXT4_WRITE=y # CONFIG_SPL_PARTITION_UUIDS is not set -CONFIG_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="imx6q-novena" CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_REDUNDAND_ENVIRONMENT=y @@ -52,19 +49,15 @@ CONFIG_ENV_OFFSET_REDUND=0x84000 CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y CONFIG_DWC_AHSATA=y -CONFIG_DM_MMC=y CONFIG_FSL_USDHC=y CONFIG_PHYLIB=y CONFIG_PHY_MICREL=y CONFIG_PHY_MICREL_KSZ90X1=y CONFIG_MII=y CONFIG_PCI=y -CONFIG_DM_PCI=y CONFIG_PINCTRL=y CONFIG_PINCTRL_IMX6=y -CONFIG_DM_SCSI=y CONFIG_USB=y -CONFIG_DM_USB=y CONFIG_USB_KEYBOARD=y CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP=y CONFIG_USB_GADGET=y @@ -74,7 +67,6 @@ CONFIG_USB_ETH_CDC=y CONFIG_USB_HOST_ETHER=y CONFIG_USB_ETHER_ASIX=y CONFIG_USB_ETHER_SMSC95XX=y -CONFIG_DM_VIDEO=y CONFIG_VIDEO_BPP16=y CONFIG_SYS_WHITE_ON_BLACK=y CONFIG_VIDEO_IPUV3=y -- 2.24.1

2 5

[PATCH v2] mx6sxsabresd: Keep only one target
by Fabio Estevam 10 Feb '20

10 Feb '20

Currently there are two targets for the i.MX6SX SabreSD board: mx6sxsabresd_defconfig and mx6sxsabresd_spl_defconfig. This brings additional maintainance effort without a clear advantage. Keep only the mx6sxsabresd_defconfig one and remove mx6sxsabresd_spl_defconfig to keep it simpler. Also remove the SPL related code from the board file. Signed-off-by: Fabio Estevam <festevam(a)gmail.com> --- Changes since v1: - Also remove the SPL related code. (Peng) board/freescale/mx6sxsabresd/MAINTAINERS | 1 - board/freescale/mx6sxsabresd/mx6sxsabresd.c | 236 -------------------- configs/mx6sxsabresd_spl_defconfig | 69 ------ 3 files changed, 306 deletions(-) delete mode 100644 configs/mx6sxsabresd_spl_defconfig diff --git a/board/freescale/mx6sxsabresd/MAINTAINERS b/board/freescale/mx6sxsabresd/MAINTAINERS index 1dcec67545..a56d252edb 100644 --- a/board/freescale/mx6sxsabresd/MAINTAINERS +++ b/board/freescale/mx6sxsabresd/MAINTAINERS @@ -4,4 +4,3 @@ S: Maintained F: board/freescale/mx6sxsabresd/ F: include/configs/mx6sxsabresd.h F: configs/mx6sxsabresd_defconfig -F: configs/mx6sxsabresd_spl_defconfig diff --git a/board/freescale/mx6sxsabresd/mx6sxsabresd.c b/board/freescale/mx6sxsabresd/mx6sxsabresd.c index 9fff8ffc4c..4f1d6602e5 100644 --- a/board/freescale/mx6sxsabresd/mx6sxsabresd.c +++ b/board/freescale/mx6sxsabresd/mx6sxsabresd.c @@ -321,239 +321,3 @@ int checkboard(void) return 0; } - -#ifdef CONFIG_SPL_BUILD -#include <linux/libfdt.h> -#include <spl.h> -#include <asm/arch/mx6-ddr.h> - -static struct fsl_esdhc_cfg usdhc_cfg[3] = { - {USDHC2_BASE_ADDR, 0, 4}, - {USDHC3_BASE_ADDR}, - {USDHC4_BASE_ADDR}, -}; - -#define USDHC3_CD_GPIO IMX_GPIO_NR(2, 10) -#define USDHC3_PWR_GPIO IMX_GPIO_NR(2, 11) -#define USDHC4_CD_GPIO IMX_GPIO_NR(6, 21) - -static iomux_v3_cfg_t const usdhc2_pads[] = { - MX6_PAD_SD2_CLK__USDHC2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD2_CMD__USDHC2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD2_DATA0__USDHC2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD2_DATA1__USDHC2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD2_DATA2__USDHC2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD2_DATA3__USDHC2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), -}; - -static iomux_v3_cfg_t const usdhc3_pads[] = { - MX6_PAD_SD3_CLK__USDHC3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD3_CMD__USDHC3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD3_DATA0__USDHC3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD3_DATA1__USDHC3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD3_DATA2__USDHC3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD3_DATA3__USDHC3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD3_DATA4__USDHC3_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD3_DATA5__USDHC3_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD3_DATA6__USDHC3_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD3_DATA7__USDHC3_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - - /* CD pin */ - MX6_PAD_KEY_COL0__GPIO2_IO_10 | MUX_PAD_CTRL(NO_PAD_CTRL), - - /* RST_B, used for power reset cycle */ - MX6_PAD_KEY_COL1__GPIO2_IO_11 | MUX_PAD_CTRL(NO_PAD_CTRL), -}; - -static iomux_v3_cfg_t const usdhc4_pads[] = { - MX6_PAD_SD4_CLK__USDHC4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD4_CMD__USDHC4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD4_DATA0__USDHC4_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD4_DATA1__USDHC4_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD4_DATA2__USDHC4_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD4_DATA3__USDHC4_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD4_DATA7__GPIO6_IO_21 | MUX_PAD_CTRL(NO_PAD_CTRL), -}; - -int board_mmc_init(bd_t *bis) -{ - struct src *src_regs = (struct src *)SRC_BASE_ADDR; - u32 val; - u32 port; - - val = readl(&src_regs->sbmr1); - - if ((val & 0xc0) != 0x40) { - printf("Not boot from USDHC!\n"); - return -EINVAL; - } - - port = (val >> 11) & 0x3; - printf("port %d\n", port); - switch (port) { - case 1: - imx_iomux_v3_setup_multiple_pads( - usdhc2_pads, ARRAY_SIZE(usdhc2_pads)); - usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK); - usdhc_cfg[0].esdhc_base = USDHC2_BASE_ADDR; - break; - case 2: - imx_iomux_v3_setup_multiple_pads( - usdhc3_pads, ARRAY_SIZE(usdhc3_pads)); - gpio_direction_input(USDHC3_CD_GPIO); - gpio_direction_output(USDHC3_PWR_GPIO, 1); - usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); - usdhc_cfg[0].esdhc_base = USDHC3_BASE_ADDR; - break; - case 3: - imx_iomux_v3_setup_multiple_pads( - usdhc4_pads, ARRAY_SIZE(usdhc4_pads)); - gpio_direction_input(USDHC4_CD_GPIO); - usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK); - usdhc_cfg[0].esdhc_base = USDHC4_BASE_ADDR; - break; - } - - gd->arch.sdhc_clk = usdhc_cfg[0].sdhc_clk; - return fsl_esdhc_initialize(bis, &usdhc_cfg[0]); -} - -int board_mmc_getcd(struct mmc *mmc) -{ - struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; - int ret = 0; - - switch (cfg->esdhc_base) { - case USDHC2_BASE_ADDR: - ret = 1; /* Assume uSDHC2 is always present */ - break; - case USDHC3_BASE_ADDR: - ret = !gpio_get_value(USDHC3_CD_GPIO); - break; - case USDHC4_BASE_ADDR: - ret = !gpio_get_value(USDHC4_CD_GPIO); - break; - } - - return ret; -} - -const struct mx6sx_iomux_ddr_regs mx6_ddr_ioregs = { - .dram_dqm0 = 0x00000028, - .dram_dqm1 = 0x00000028, - .dram_dqm2 = 0x00000028, - .dram_dqm3 = 0x00000028, - .dram_ras = 0x00000020, - .dram_cas = 0x00000020, - .dram_odt0 = 0x00000020, - .dram_odt1 = 0x00000020, - .dram_sdba2 = 0x00000000, - .dram_sdcke0 = 0x00003000, - .dram_sdcke1 = 0x00003000, - .dram_sdclk_0 = 0x00000030, - .dram_sdqs0 = 0x00000028, - .dram_sdqs1 = 0x00000028, - .dram_sdqs2 = 0x00000028, - .dram_sdqs3 = 0x00000028, - .dram_reset = 0x00000020, -}; - -const struct mx6sx_iomux_grp_regs mx6_grp_ioregs = { - .grp_addds = 0x00000020, - .grp_ddrmode_ctl = 0x00020000, - .grp_ddrpke = 0x00000000, - .grp_ddrmode = 0x00020000, - .grp_b0ds = 0x00000028, - .grp_b1ds = 0x00000028, - .grp_ctlds = 0x00000020, - .grp_ddr_type = 0x000c0000, - .grp_b2ds = 0x00000028, - .grp_b3ds = 0x00000028, -}; - -const struct mx6_mmdc_calibration mx6_mmcd_calib = { - .p0_mpwldectrl0 = 0x00290025, - .p0_mpwldectrl1 = 0x00220022, - .p0_mpdgctrl0 = 0x41480144, - .p0_mpdgctrl1 = 0x01340130, - .p0_mprddlctl = 0x3C3E4244, - .p0_mpwrdlctl = 0x34363638, -}; - -static struct mx6_ddr3_cfg mem_ddr = { - .mem_speed = 1600, - .density = 4, - .width = 32, - .banks = 8, - .rowaddr = 15, - .coladdr = 10, - .pagesz = 2, - .trcd = 1375, - .trcmin = 4875, - .trasmin = 3500, -}; - -static void ccgr_init(void) -{ - struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; - - writel(0xFFFFFFFF, &ccm->CCGR0); - writel(0xFFFFFFFF, &ccm->CCGR1); - writel(0xFFFFFFFF, &ccm->CCGR2); - writel(0xFFFFFFFF, &ccm->CCGR3); - writel(0xFFFFFFFF, &ccm->CCGR4); - writel(0xFFFFFFFF, &ccm->CCGR5); - writel(0xFFFFFFFF, &ccm->CCGR6); - writel(0xFFFFFFFF, &ccm->CCGR7); -} - -static void spl_dram_init(void) -{ - struct mx6_ddr_sysinfo sysinfo = { - .dsize = mem_ddr.width/32, - .cs_density = 24, - .ncs = 1, - .cs1_mirror = 0, - .rtt_wr = 2, - .rtt_nom = 2, /* RTT_Nom = RZQ/2 */ - .walat = 1, /* Write additional latency */ - .ralat = 5, /* Read additional latency */ - .mif3_mode = 3, /* Command prediction working mode */ - .bi_on = 1, /* Bank interleaving enabled */ - .sde_to_rst = 0x10, /* 14 cycles, 200us (JEDEC default) */ - .rst_to_cke = 0x23, /* 33 cycles, 500us (JEDEC default) */ - .ddr_type = DDR_TYPE_DDR3, - .refsel = 1, /* Refresh cycles at 32KHz */ - .refr = 7, /* 8 refresh commands per refresh cycle */ - }; - - mx6sx_dram_iocfg(mem_ddr.width, &mx6_ddr_ioregs, &mx6_grp_ioregs); - mx6_dram_cfg(&sysinfo, &mx6_mmcd_calib, &mem_ddr); -} - -void board_init_f(ulong dummy) -{ - /* setup AIPS and disable watchdog */ - arch_cpu_init(); - - ccgr_init(); - - /* iomux and setup of i2c */ - board_early_init_f(); - - /* setup GP timer */ - timer_init(); - - /* UART clocks enabled and gd valid - init serial console */ - preloader_console_init(); - - /* DDR initialization */ - spl_dram_init(); - - /* Clear the BSS. */ - memset(__bss_start, 0, __bss_end - __bss_start); - - /* load/boot image from boot device */ - board_init_r(NULL, 0); -} -#endif diff --git a/configs/mx6sxsabresd_spl_defconfig b/configs/mx6sxsabresd_spl_defconfig deleted file mode 100644 index 65a8581044..0000000000 -- 2.17.1

3 2

[PATCH] imx: mx6ul_14x14_evk: turn of backlight and LCD before booting OS
by Anatolij Gustschin 10 Feb '20

10 Feb '20

This should help keeping the screen black when booting the kernel. Signed-off-by: Anatolij Gustschin <agust(a)denx.de> Reported-by: Fabio Estevam <festevam(a)gmail.com> --- board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c b/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c index 086e0e6739..9cb5b14f13 100644 --- a/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c +++ b/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c @@ -384,6 +384,15 @@ int checkboard(void) return 0; } +/* + * Backlight off and reset LCD before OS handover + */ +void board_preboot_os(void) +{ + gpio_set_value(IMX_GPIO_NR(1, 8), 0); + gpio_set_value(IMX_GPIO_NR(5, 9), 0); +} + #ifdef CONFIG_SPL_BUILD #include <linux/libfdt.h> #include <spl.h> -- 2.17.1

3 2

[PATCH] imx6: aristainetos: fix NAND detection with latest mainline
by Heiko Schocher 10 Feb '20

10 Feb '20

commit 88718be30010 ("mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND") moved CONFIG_NAND -> CONFIG_MTD_RAW_NAND. Adapt board code to this change, as last merge did not respect the above commit. Signed-off-by: Heiko Schocher <hs(a)denx.de> --- board/aristainetos/aristainetos.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/board/aristainetos/aristainetos.c b/board/aristainetos/aristainetos.c index c79ac1d339..3541717873 100644 --- a/board/aristainetos/aristainetos.c +++ b/board/aristainetos/aristainetos.c @@ -521,7 +521,7 @@ struct display_info_t const displays[] = { }; size_t display_count = ARRAY_SIZE(displays); -#if defined(CONFIG_NAND) +#if defined(CONFIG_MTD_RAW_NAND) iomux_v3_cfg_t nfc_pads[] = { MX6_PAD_NANDF_CLE__NAND_CLE | MUX_PAD_CTRL(NO_PAD_CTRL), MX6_PAD_NANDF_ALE__NAND_ALE | MUX_PAD_CTRL(NO_PAD_CTRL), -- 2.24.1

2 1