April 2019 - U-Boot

[U-Boot] [PATCH] Makefile: Create single image for imx6 socs based boards
by Shyam Saini 30 Apr '19

30 Apr '19

IMX6 platform has two stage boot loaders like SPL and U-Boot proper. For each stage we need to burn the image on to flash with respective offsets. This patch create a single image using binman, so that user can get rid of burning different stage boot images. without this patch: ------------------ $ sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1 $ sudo dd if=u-boot-dtb.img of=/dev/mmcblk0 bs=1k seek=69 with this patch: --------------- $ sudo dd if=u-boot-imx6-with-spl.bin of=/dev/mmcblk0 bs=1k seek=1 This would be easily extended to single image creation for other imx6 soc boards. This was tested on engicam imx6qdl and imx6ul boards Reviewed-by: Jagan Teki <jagan(a)amarulasolutions.com> Signed-off-by: Shyam Saini <shyam.saini(a)amarulasolutions.com> --- Makefile | 10 ++++++++++ arch/arm/dts/imx6-u-boot-binman.dtsi | 16 ++++++++++++++++ arch/arm/dts/imx6qdl-u-boot.dtsi | 1 + arch/arm/dts/imx6ul-u-boot.dtsi | 1 + arch/arm/mach-imx/mx6/Kconfig | 2 ++ doc/imx/common/imx6.txt | 5 +++++ 6 files changed, 35 insertions(+) create mode 100644 arch/arm/dts/imx6-u-boot-binman.dtsi diff --git a/Makefile b/Makefile index f2c7bb6041..474271a1d0 100644 --- a/Makefile +++ b/Makefile @@ -851,6 +851,11 @@ ifeq ($(CONFIG_ARCH_SUNXI)$(CONFIG_SPL),yy) ALL-y += u-boot-sunxi-with-spl.bin endif +# Build a combined spl + u-boot image for imx6 +ifeq ($(filter y, $(CONFIG_MX6QDL) $(CONFIG_MX6UL))$(CONFIG_SPL)$(CONFIG_OF_CONTROL),yyy) +ALL-$(CONFIG_ARCH_MX6) += u-boot-imx6-with-spl.bin +endif + # enable combined SPL/u-boot/dtb rules for tegra ifeq ($(CONFIG_TEGRA)$(CONFIG_SPL),yy) ALL-y += u-boot-tegra.bin u-boot-nodtb-tegra.bin @@ -1364,6 +1369,11 @@ u-boot-br.bin: u-boot FORCE endif endif +ifeq ($(filter y, $(CONFIG_MX6QDL) $(CONFIG_MX6UL))$(CONFIG_SPL)$(CONFIG_OF_CONTROL),yyy) +u-boot-imx6-with-spl.bin: SPL u-boot-dtb.img FORCE + @$(call if_changed,binman) +endif + # x86 uses a large ROM. We fill it with 0xff, put the 16-bit stuff (including # reset vector) at the top, Intel ME descriptor at the bottom, and U-Boot in # the middle. This is handled by binman based on an image description in the diff --git a/arch/arm/dts/imx6-u-boot-binman.dtsi b/arch/arm/dts/imx6-u-boot-binman.dtsi new file mode 100644 index 0000000000..fa02d5f61f --- /dev/null +++ b/arch/arm/dts/imx6-u-boot-binman.dtsi @@ -0,0 +1,16 @@ +#include <config.h> + +/ { + binman { + filename = "u-boot-imx6-with-spl.bin"; + pad-byte = <0xff>; + + blob { + filename = "SPL"; + }; + + u-boot-img { + offset = <CONFIG_SPL_PAD_TO>; + }; + }; +}; diff --git a/arch/arm/dts/imx6qdl-u-boot.dtsi b/arch/arm/dts/imx6qdl-u-boot.dtsi index 0aa29e38b8..3dfa84dcac 100644 --- a/arch/arm/dts/imx6qdl-u-boot.dtsi +++ b/arch/arm/dts/imx6qdl-u-boot.dtsi @@ -2,6 +2,7 @@ /* * Copyright (C) 2018 Jagan Teki <jagan(a)amarulasolutions.com> */ +#include "imx6-u-boot-binman.dtsi" / { soc { diff --git a/arch/arm/dts/imx6ul-u-boot.dtsi b/arch/arm/dts/imx6ul-u-boot.dtsi index eb190cf8c8..4e769da0d5 100644 --- a/arch/arm/dts/imx6ul-u-boot.dtsi +++ b/arch/arm/dts/imx6ul-u-boot.dtsi @@ -2,6 +2,7 @@ /* * Copyright (C) 2018 Jagan Teki <jagan(a)amarulasolutions.com> */ +#include "imx6-u-boot-binman.dtsi" / { soc { diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig index e782859b1e..7de1a00935 100644 --- a/arch/arm/mach-imx/mx6/Kconfig +++ b/arch/arm/mach-imx/mx6/Kconfig @@ -34,6 +34,7 @@ config MX6QDL bool select HAS_CAAM select MX6_SMP + select BINMAN if SPL && OF_CONTROL config MX6S bool @@ -57,6 +58,7 @@ config MX6UL select ROM_UNIFIED_SECTIONS select SYSCOUNTER_TIMER select SYS_L2CACHE_OFF + select BINMAN if SPL && OF_CONTROL config MX6UL_LITESOM bool diff --git a/doc/imx/common/imx6.txt b/doc/imx/common/imx6.txt index eab88353f6..5a10f94957 100644 --- a/doc/imx/common/imx6.txt +++ b/doc/imx/common/imx6.txt @@ -88,3 +88,8 @@ Reading bank 4: Word 0x00000002: 9f027772 00000004 +2. Single Boot Image +--------------------- +Write your single imx6 uboot image as: + +$ sudo dd if=u-boot-imx6-with-spl.bin of=/dev/mmcblk0 bs=1k seek=1 -- 2.11.0

4 7

[U-Boot] [PATCH] Convert CONFIG_SUPPORT_EMMC_BOOT to Kconfig
by Alex Kiernan 30 Apr '19

30 Apr '19

This converts the following to Kconfig: CONFIG_SUPPORT_EMMC_BOOT Signed-off-by: Alex Kiernan <alex.kiernan(a)gmail.com> --- Green travis build: https://travis-ci.org/akiernan/u-boot/builds/521906850 Testing affected boards for configuration changes: boards.cfg is up to date. Nothing to do. Summary of 3 commits for 95 boards (4 threads, 1 job per thread) 01: Merge tag 'u-boot-imx-20190415' of git://git.denx.de/u-boot-imx aarch64: w+ xilinx_zynqmp_mini_emmc1 xilinx_zynqmp_mini_emmc0 xilinx_zynqmp_mini_qspi clearfog_gt_8k imx8qxp_mek xilinx_zynqmp_mini xilinx_zynqmp_mini_nand imx8mq_evk arm: w+ cm_t54 cl-som-imx7 marsboard clearfog apalis_imx6 warp7 pico-hobbit-imx7d pico-pi-imx6ul dms-ba16 arndale riotboard pico-hobbit-imx6ul colibri_imx7 pico-imx7d xpress_spl opos6uldev warp7_bl33 imx6dl_mamoj ge_bx50v3 display5 mx7dsabresd_qspi display5_factory colibri_imx7_emmc gwventana_nand mx7dsabresd gwventana_gw5904 gwventana_emmc am57xx_hs_evm_usb omap5_uevm brppt1_spi xilinx_zynqmp_r5 vinco mx6sabresd warp riotboard_spl vining_2000 zc5601 zc5202 xpress pico-imx6ul dms-ba16-1g pico-pi-imx7d 02: configs: Resync with savedefconfig 03: Convert CONFIG_SUPPORT_EMMC_BOOT to Kconfig README | 3 --- configs/am57xx_evm_defconfig | 1 + configs/am57xx_hs_evm_defconfig | 1 + configs/am57xx_hs_evm_usb_defconfig | 1 + configs/apalis-tk1_defconfig | 1 + configs/apalis_imx6_defconfig | 1 + configs/arndale_defconfig | 1 + configs/avnet_ultra96_rev1_defconfig | 1 + configs/cl-som-imx7_defconfig | 1 + configs/clearfog_defconfig | 1 + configs/cm_t54_defconfig | 1 + configs/colibri_imx6_defconfig | 1 + configs/colibri_imx7_emmc_defconfig | 1 + configs/display5_defconfig | 1 + configs/display5_factory_defconfig | 1 + configs/dms-ba16-1g_defconfig | 1 + configs/dms-ba16_defconfig | 1 + configs/dra7xx_evm_defconfig | 1 + configs/dra7xx_hs_evm_defconfig | 1 + configs/dra7xx_hs_evm_usb_defconfig | 1 + configs/edison_defconfig | 1 + configs/ge_bx50v3_defconfig | 1 + configs/gwventana_emmc_defconfig | 1 + configs/gwventana_gw5904_defconfig | 1 + configs/gwventana_nand_defconfig | 1 + configs/imx6dl_mamoj_defconfig | 1 + configs/imx8mq_evk_defconfig | 1 + configs/imx8qxp_mek_defconfig | 1 + configs/liteboard_defconfig | 1 + configs/mt7623n_bpir2_defconfig | 1 + configs/mx6sabresd_defconfig | 1 + configs/mx7dsabresd_defconfig | 1 + configs/mx7dsabresd_qspi_defconfig | 1 + configs/mx7ulp_evk_defconfig | 1 + configs/mx7ulp_evk_plugin_defconfig | 1 + configs/odroid-xu3_defconfig | 1 + configs/omap5_uevm_defconfig | 1 + configs/opos6uldev_defconfig | 1 + configs/peach-pi_defconfig | 1 + configs/peach-pit_defconfig | 1 + configs/pico-hobbit-imx6ul_defconfig | 1 + configs/pico-hobbit-imx7d_defconfig | 1 + configs/pico-imx6ul_defconfig | 1 + configs/pico-imx7d_defconfig | 1 + configs/pico-pi-imx6ul_defconfig | 1 + configs/pico-pi-imx7d_defconfig | 1 + configs/riotboard_defconfig | 1 + configs/riotboard_spl_defconfig | 1 + configs/smdk5250_defconfig | 1 + configs/smdk5420_defconfig | 1 + configs/snow_defconfig | 1 + configs/spring_defconfig | 1 + configs/stm32mp15_basic_defconfig | 1 + configs/stm32mp15_trusted_defconfig | 1 + configs/uniphier_ld4_sld8_defconfig | 1 + configs/uniphier_v7_defconfig | 1 + configs/uniphier_v8_defconfig | 1 + configs/vinco_defconfig | 1 + configs/vining_2000_defconfig | 1 + configs/warp7_bl33_defconfig | 1 + configs/warp7_defconfig | 1 + configs/warp_defconfig | 1 + configs/xilinx_zynqmp_mini_emmc0_defconfig | 1 + configs/xilinx_zynqmp_mini_emmc1_defconfig | 1 + configs/xilinx_zynqmp_zc1275_revB_defconfig | 1 + configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig | 1 + configs/xilinx_zynqmp_zc1751_xm017_dc3_defconfig | 1 + configs/xilinx_zynqmp_zc1751_xm018_dc4_defconfig | 1 + configs/xilinx_zynqmp_zc1751_xm019_dc5_defconfig | 1 + configs/xilinx_zynqmp_zcu100_revC_defconfig | 1 + configs/xilinx_zynqmp_zcu102_rev1_0_defconfig | 1 + configs/xilinx_zynqmp_zcu102_revA_defconfig | 1 + configs/xilinx_zynqmp_zcu102_revB_defconfig | 1 + configs/xilinx_zynqmp_zcu104_revA_defconfig | 1 + configs/xilinx_zynqmp_zcu104_revC_defconfig | 1 + configs/xilinx_zynqmp_zcu106_revA_defconfig | 1 + configs/xilinx_zynqmp_zcu111_revA_defconfig | 1 + configs/xpress_defconfig | 1 + configs/xpress_spl_defconfig | 1 + configs/zc5202_defconfig | 1 + configs/zc5601_defconfig | 1 + drivers/mmc/Kconfig | 6 ++++++ include/configs/advantech_dms-ba16.h | 2 -- include/configs/am57xx_evm.h | 2 -- include/configs/apalis-tk1.h | 3 --- include/configs/apalis_imx6.h | 2 -- include/configs/arndale.h | 3 --- include/configs/brppt1.h | 5 ----- include/configs/cl-som-imx7.h | 1 - include/configs/clearfog.h | 4 ---- include/configs/cm_t54.h | 1 - include/configs/colibri_imx6.h | 2 -- include/configs/colibri_imx7.h | 2 -- include/configs/display5.h | 1 - include/configs/dra7xx_evm.h | 2 -- include/configs/dragonboard410c.h | 7 ------- include/configs/edison.h | 1 - include/configs/embestmx6boards.h | 1 - include/configs/exynos5-common.h | 1 - include/configs/ge_bx50v3.h | 3 --- include/configs/gw_ventana.h | 3 --- include/configs/imx6dl-mamoj.h | 1 - include/configs/imx8mq_evk.h | 1 - include/configs/imx8qxp_mek.h | 1 - include/configs/liteboard.h | 1 - include/configs/mt7623.h | 1 - include/configs/mx6sabresd.h | 2 -- include/configs/mx7dsabresd.h | 1 - include/configs/mx7ulp_evk.h | 1 - include/configs/omap5_uevm.h | 1 - include/configs/opos6uldev.h | 3 --- include/configs/pico-imx6ul.h | 1 - include/configs/pico-imx7d.h | 1 - include/configs/stm32mp1.h | 1 - include/configs/uniphier.h | 3 --- include/configs/vinco.h | 1 - include/configs/vining_2000.h | 1 - include/configs/warp.h | 1 - include/configs/warp7.h | 1 - include/configs/xilinx_zynqmp.h | 4 ---- include/configs/xpress.h | 1 - include/configs/zc5202.h | 2 -- include/configs/zc5601.h | 2 -- scripts/config_whitelist.txt | 1 - 124 files changed, 86 insertions(+), 82 deletions(-) diff --git a/README b/README index a514f48caefc..c444959b662d 100644 --- a/README +++ b/README @@ -1120,9 +1120,6 @@ The following options need to be configured: CONFIG_SH_MMCIF_CLK Define the clock frequency for MMCIF - CONFIG_SUPPORT_EMMC_BOOT - Enable some additional features of the eMMC boot partitions. - - USB Device Firmware Update (DFU) class support: CONFIG_DFU_OVER_USB This enables the USB portion of the DFU USB class diff --git a/configs/am57xx_evm_defconfig b/configs/am57xx_evm_defconfig index 7a46e62ffb59..c17a7d32a8f9 100644 --- a/configs/am57xx_evm_defconfig +++ b/configs/am57xx_evm_defconfig @@ -58,6 +58,7 @@ CONFIG_DM_GPIO=y CONFIG_DM_I2C=y CONFIG_MISC=y CONFIG_DM_MMC=y +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_MMC_OMAP_HS=y CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH=y diff --git a/configs/am57xx_hs_evm_defconfig b/configs/am57xx_hs_evm_defconfig index 354c3c5c5ab1..0d0afed91604 100644 --- a/configs/am57xx_hs_evm_defconfig +++ b/configs/am57xx_hs_evm_defconfig @@ -57,6 +57,7 @@ CONFIG_DM_GPIO=y CONFIG_DM_I2C=y CONFIG_MISC=y CONFIG_DM_MMC=y +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_MMC_OMAP_HS=y CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH=y diff --git a/configs/am57xx_hs_evm_usb_defconfig b/configs/am57xx_hs_evm_usb_defconfig index 83b0110bcf40..812df8ffe45c 100644 --- a/configs/am57xx_hs_evm_usb_defconfig +++ b/configs/am57xx_hs_evm_usb_defconfig @@ -62,6 +62,7 @@ CONFIG_DM_GPIO=y CONFIG_DM_I2C=y CONFIG_MISC=y CONFIG_DM_MMC=y +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_MMC_OMAP_HS=y CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH=y diff --git a/configs/apalis-tk1_defconfig b/configs/apalis-tk1_defconfig index d3ffbc736cef..5fd0b65b392b 100644 --- a/configs/apalis-tk1_defconfig +++ b/configs/apalis-tk1_defconfig @@ -33,6 +33,7 @@ CONFIG_SPL_DM=y CONFIG_DFU_MMC=y CONFIG_DFU_RAM=y CONFIG_SYS_I2C_TEGRA=y +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_TEGRA124_MMC_DISABLE_EXT_LOOPBACK=y CONFIG_E1000=y CONFIG_PCI=y diff --git a/configs/apalis_imx6_defconfig b/configs/apalis_imx6_defconfig index 2bc5de49011a..7d0736f2f52e 100644 --- a/configs/apalis_imx6_defconfig +++ b/configs/apalis_imx6_defconfig @@ -57,6 +57,7 @@ CONFIG_DFU_MMC=y CONFIG_DM_GPIO=y CONFIG_DM_I2C=y CONFIG_DM_MMC=y +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_FSL_ESDHC=y CONFIG_PHYLIB=y CONFIG_PHY_MICREL=y diff --git a/configs/arndale_defconfig b/configs/arndale_defconfig index 89ae6f224a5e..d0af2be0c9c2 100644 --- a/configs/arndale_defconfig +++ b/configs/arndale_defconfig @@ -25,6 +25,7 @@ CONFIG_CMD_EXT4_WRITE=y CONFIG_DEFAULT_DEVICE_TREE="exynos5250-arndale" CONFIG_ENV_IS_IN_MMC=y CONFIG_DM_I2C_COMPAT=y +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_MMC_DW=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_S5P=y diff --git a/configs/avnet_ultra96_rev1_defconfig b/configs/avnet_ultra96_rev1_defconfig index 15a682789350..924153081149 100644 --- a/configs/avnet_ultra96_rev1_defconfig +++ b/configs/avnet_ultra96_rev1_defconfig @@ -55,6 +55,7 @@ CONFIG_I2C_MUX_PCA954x=y CONFIG_LED=y CONFIG_LED_GPIO=y CONFIG_MISC=y +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ZYNQ=y CONFIG_SPI_FLASH=y diff --git a/configs/cl-som-imx7_defconfig b/configs/cl-som-imx7_defconfig index 1701895646dd..2bc668f8a978 100644 --- a/configs/cl-som-imx7_defconfig +++ b/configs/cl-som-imx7_defconfig @@ -49,6 +49,7 @@ CONFIG_DEFAULT_DEVICE_TREE="imx7d-sdb" # CONFIG_ENV_IS_IN_MMC is not set CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_DM_MMC=y +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_FSL_ESDHC=y CONFIG_SPI_FLASH=y CONFIG_SF_DEFAULT_MODE=0 diff --git a/configs/clearfog_defconfig b/configs/clearfog_defconfig index 8f088419d20f..3ed74fdaac6c 100644 --- a/configs/clearfog_defconfig +++ b/configs/clearfog_defconfig @@ -44,6 +44,7 @@ CONFIG_DM_GPIO=y CONFIG_DM_PCA953X=y CONFIG_DM_I2C=y CONFIG_SYS_I2C_MVTWSI=y +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_SDMA=y CONFIG_MMC_SDHCI_MV=y diff --git a/configs/cm_t54_defconfig b/configs/cm_t54_defconfig index 05ac37cc2503..31d011c7f311 100644 --- a/configs/cm_t54_defconfig +++ b/configs/cm_t54_defconfig @@ -31,6 +31,7 @@ CONFIG_CMD_EXT4_WRITE=y CONFIG_ENV_IS_IN_MMC=y CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y CONFIG_SCSI_AHCI=y +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_MMC_OMAP_HS=y CONFIG_SCSI=y CONFIG_CONS_INDEX=4 diff --git a/configs/colibri_imx6_defconfig b/configs/colibri_imx6_defconfig index 6e3fc5955def..1c8613f0672c 100644 --- a/configs/colibri_imx6_defconfig +++ b/configs/colibri_imx6_defconfig @@ -55,6 +55,7 @@ CONFIG_DFU_MMC=y CONFIG_DM_GPIO=y CONFIG_DM_I2C=y CONFIG_DM_MMC=y +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_FSL_ESDHC=y CONFIG_PHYLIB=y CONFIG_PHY_MICREL=y diff --git a/configs/colibri_imx7_emmc_defconfig b/configs/colibri_imx7_emmc_defconfig index 5e2a204a881b..0617b120a05c 100644 --- a/configs/colibri_imx7_emmc_defconfig +++ b/configs/colibri_imx7_emmc_defconfig @@ -45,6 +45,7 @@ CONFIG_DFU_MMC=y CONFIG_DM_GPIO=y CONFIG_DM_I2C=y CONFIG_DM_MMC=y +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_FSL_ESDHC=y CONFIG_PHYLIB=y CONFIG_PHY_MICREL=y diff --git a/configs/display5_defconfig b/configs/display5_defconfig index f22e1a1701a4..294ee93ea080 100644 --- a/configs/display5_defconfig +++ b/configs/display5_defconfig @@ -62,6 +62,7 @@ CONFIG_BOOTCOUNT_LIMIT=y CONFIG_BOOTCOUNT_BOOTLIMIT=3 CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y CONFIG_SYS_BOOTCOUNT_ADDR=0x020CC068 +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_FSL_ESDHC=y CONFIG_MTD_DEVICE=y CONFIG_SPI_FLASH=y diff --git a/configs/display5_factory_defconfig b/configs/display5_factory_defconfig index 54ec97c4c66c..c601425cfd09 100644 --- a/configs/display5_factory_defconfig +++ b/configs/display5_factory_defconfig @@ -63,6 +63,7 @@ CONFIG_PARTITION_TYPE_GUID=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_DFU_MMC=y CONFIG_DFU_SF=y +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_FSL_ESDHC=y CONFIG_MTD_DEVICE=y CONFIG_SPI_FLASH=y diff --git a/configs/dms-ba16-1g_defconfig b/configs/dms-ba16-1g_defconfig index eed0b67a1278..980f7b4abb62 100644 --- a/configs/dms-ba16-1g_defconfig +++ b/configs/dms-ba16-1g_defconfig @@ -32,6 +32,7 @@ CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_DWC_AHSATA=y +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_FSL_ESDHC=y CONFIG_SPI_FLASH=y CONFIG_SF_DEFAULT_MODE=0 diff --git a/configs/dms-ba16_defconfig b/configs/dms-ba16_defconfig index d9f6d59874bf..bea75b5d23c9 100644 --- a/configs/dms-ba16_defconfig +++ b/configs/dms-ba16_defconfig @@ -31,6 +31,7 @@ CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_DWC_AHSATA=y +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_FSL_ESDHC=y CONFIG_SPI_FLASH=y CONFIG_SF_DEFAULT_MODE=0 diff --git a/configs/dra7xx_evm_defconfig b/configs/dra7xx_evm_defconfig index bfc9d36b20e3..cd4c74f12f5c 100644 --- a/configs/dra7xx_evm_defconfig +++ b/configs/dra7xx_evm_defconfig @@ -64,6 +64,7 @@ CONFIG_PCF8575_GPIO=y CONFIG_DM_I2C=y CONFIG_MISC=y CONFIG_DM_MMC=y +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_MMC_IO_VOLTAGE=y CONFIG_MMC_UHS_SUPPORT=y CONFIG_MMC_HS200_SUPPORT=y diff --git a/configs/dra7xx_hs_evm_defconfig b/configs/dra7xx_hs_evm_defconfig index 56dd35b39075..dfe443d71207 100644 --- a/configs/dra7xx_hs_evm_defconfig +++ b/configs/dra7xx_hs_evm_defconfig @@ -68,6 +68,7 @@ CONFIG_PCF8575_GPIO=y CONFIG_DM_I2C=y CONFIG_MISC=y CONFIG_DM_MMC=y +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_MMC_IO_VOLTAGE=y CONFIG_MMC_UHS_SUPPORT=y CONFIG_MMC_HS200_SUPPORT=y diff --git a/configs/dra7xx_hs_evm_usb_defconfig b/configs/dra7xx_hs_evm_usb_defconfig index 63e31dac3cb2..c9ad06778ac6 100644 --- a/configs/dra7xx_hs_evm_usb_defconfig +++ b/configs/dra7xx_hs_evm_usb_defconfig @@ -69,6 +69,7 @@ CONFIG_PCF8575_GPIO=y CONFIG_DM_I2C=y CONFIG_MISC=y CONFIG_DM_MMC=y +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_MMC_IO_VOLTAGE=y CONFIG_MMC_UHS_SUPPORT=y CONFIG_MMC_HS200_SUPPORT=y diff --git a/configs/edison_defconfig b/configs/edison_defconfig index 22fc84a41e38..b99906a4d144 100644 --- a/configs/edison_defconfig +++ b/configs/edison_defconfig @@ -30,6 +30,7 @@ CONFIG_ENV_IS_IN_MMC=y CONFIG_CPU=y CONFIG_DFU_MMC=y CONFIG_DFU_RAM=y +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_DM_PCI_COMPAT=y CONFIG_RTC_MC146818=y CONFIG_USB_DWC3_GADGET=y diff --git a/configs/ge_bx50v3_defconfig b/configs/ge_bx50v3_defconfig index eba37939f914..3111451162c1 100644 --- a/configs/ge_bx50v3_defconfig +++ b/configs/ge_bx50v3_defconfig @@ -42,6 +42,7 @@ CONFIG_SYS_BOOTCOUNT_EXT_DEVPART="1:5" CONFIG_SYS_BOOTCOUNT_ADDR=0x7000A000 CONFIG_DM_GPIO=y CONFIG_DM_MMC=y +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_FSL_ESDHC=y CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH=y diff --git a/configs/gwventana_emmc_defconfig b/configs/gwventana_emmc_defconfig index 4cce2a02a032..9b6aa3bb0e59 100644 --- a/configs/gwventana_emmc_defconfig +++ b/configs/gwventana_emmc_defconfig @@ -61,6 +61,7 @@ CONFIG_ENV_IS_IN_MMC=y CONFIG_DM=y CONFIG_DWC_AHSATA=y CONFIG_SUPPORT_EMMC_RPMB=y +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_FSL_ESDHC=y CONFIG_MTD_DEVICE=y CONFIG_PHYLIB=y diff --git a/configs/gwventana_gw5904_defconfig b/configs/gwventana_gw5904_defconfig index 7983d9a69db8..c812ff8d6628 100644 --- a/configs/gwventana_gw5904_defconfig +++ b/configs/gwventana_gw5904_defconfig @@ -61,6 +61,7 @@ CONFIG_ENV_IS_IN_MMC=y CONFIG_DM=y CONFIG_DWC_AHSATA=y CONFIG_SUPPORT_EMMC_RPMB=y +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_FSL_ESDHC=y CONFIG_MTD_DEVICE=y CONFIG_PHYLIB=y diff --git a/configs/gwventana_nand_defconfig b/configs/gwventana_nand_defconfig index 5b4e807e5cc4..8557fed9253c 100644 --- a/configs/gwventana_nand_defconfig +++ b/configs/gwventana_nand_defconfig @@ -63,6 +63,7 @@ CONFIG_ENV_IS_IN_NAND=y CONFIG_DM=y CONFIG_DWC_AHSATA=y CONFIG_SUPPORT_EMMC_RPMB=y +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_FSL_ESDHC=y CONFIG_NAND=y CONFIG_NAND_MXS=y diff --git a/configs/imx6dl_mamoj_defconfig b/configs/imx6dl_mamoj_defconfig index 10e271c1f07f..53cd1750c3fa 100644 --- a/configs/imx6dl_mamoj_defconfig +++ b/configs/imx6dl_mamoj_defconfig @@ -31,6 +31,7 @@ CONFIG_FASTBOOT_BUF_SIZE=0x10000000 CONFIG_FASTBOOT_FLASH=y CONFIG_FASTBOOT_FLASH_MMC_DEV=2 CONFIG_SYS_I2C_MXC=y +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_FSL_ESDHC=y CONFIG_PHYLIB=y CONFIG_PHY_MICREL=y diff --git a/configs/imx8mq_evk_defconfig b/configs/imx8mq_evk_defconfig index 46100b671963..dc622b263d21 100644 --- a/configs/imx8mq_evk_defconfig +++ b/configs/imx8mq_evk_defconfig @@ -28,6 +28,7 @@ CONFIG_DM_GPIO=y CONFIG_DM_I2C=y CONFIG_SYS_I2C_MXC=y CONFIG_DM_MMC=y +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_DM_ETH=y CONFIG_PINCTRL=y CONFIG_PINCTRL_IMX8M=y diff --git a/configs/imx8qxp_mek_defconfig b/configs/imx8qxp_mek_defconfig index a94998b8b524..574e9467c4b8 100644 --- a/configs/imx8qxp_mek_defconfig +++ b/configs/imx8qxp_mek_defconfig @@ -51,6 +51,7 @@ CONFIG_I2C_MUX=y CONFIG_I2C_MUX_PCA954x=y CONFIG_MISC=y CONFIG_DM_MMC=y +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_PHYLIB=y CONFIG_PHY_ADDR_ENABLE=y CONFIG_PHY_ATHEROS=y diff --git a/configs/liteboard_defconfig b/configs/liteboard_defconfig index e4a2fcc7fbe5..f2fceb8f3ddb 100644 --- a/configs/liteboard_defconfig +++ b/configs/liteboard_defconfig @@ -37,6 +37,7 @@ CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM_GPIO=y CONFIG_DM_I2C=y CONFIG_DM_MMC=y +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_FSL_ESDHC=y CONFIG_PHYLIB=y CONFIG_DM_ETH=y diff --git a/configs/mt7623n_bpir2_defconfig b/configs/mt7623n_bpir2_defconfig index 5c411fe1d166..ae8209831b44 100644 --- a/configs/mt7623n_bpir2_defconfig +++ b/configs/mt7623n_bpir2_defconfig @@ -35,6 +35,7 @@ CONFIG_SYSCON=y CONFIG_CLK=y CONFIG_DM_MMC=y # CONFIG_MMC_QUIRKS is not set +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_MMC_HS400_SUPPORT=y CONFIG_MMC_MTK=y CONFIG_PHY_FIXED=y diff --git a/configs/mx6sabresd_defconfig b/configs/mx6sabresd_defconfig index e5174bbe7845..746be0dcf8b4 100644 --- a/configs/mx6sabresd_defconfig +++ b/configs/mx6sabresd_defconfig @@ -72,6 +72,7 @@ CONFIG_FASTBOOT_FLASH=y CONFIG_FASTBOOT_FLASH_MMC_DEV=2 CONFIG_DM_GPIO=y CONFIG_DM_MMC=y +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_FSL_ESDHC=y CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH=y diff --git a/configs/mx7dsabresd_defconfig b/configs/mx7dsabresd_defconfig index 88d363a27e61..b2ca4f96ccdf 100644 --- a/configs/mx7dsabresd_defconfig +++ b/configs/mx7dsabresd_defconfig @@ -44,6 +44,7 @@ CONFIG_DM_GPIO=y CONFIG_DM_74X164=y CONFIG_DM_I2C=y CONFIG_DM_MMC=y +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_MMC_IO_VOLTAGE=y CONFIG_MMC_UHS_SUPPORT=y CONFIG_MMC_HS200_SUPPORT=y diff --git a/configs/mx7dsabresd_qspi_defconfig b/configs/mx7dsabresd_qspi_defconfig index 3d74967432da..27a838787a7c 100644 --- a/configs/mx7dsabresd_qspi_defconfig +++ b/configs/mx7dsabresd_qspi_defconfig @@ -44,6 +44,7 @@ CONFIG_DM_GPIO=y CONFIG_DM_74X164=y CONFIG_DM_I2C=y CONFIG_DM_MMC=y +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_MMC_IO_VOLTAGE=y CONFIG_MMC_UHS_SUPPORT=y CONFIG_MMC_HS200_SUPPORT=y diff --git a/configs/mx7ulp_evk_defconfig b/configs/mx7ulp_evk_defconfig index 6bbacaa68618..d125ccc1af04 100644 --- a/configs/mx7ulp_evk_defconfig +++ b/configs/mx7ulp_evk_defconfig @@ -21,6 +21,7 @@ CONFIG_IMX_RGPIO2P=y # CONFIG_MXC_GPIO is not set CONFIG_DM_I2C=y CONFIG_DM_MMC=y +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_FSL_ESDHC=y CONFIG_PINCTRL=y CONFIG_PINCTRL_IMX7ULP=y diff --git a/configs/mx7ulp_evk_plugin_defconfig b/configs/mx7ulp_evk_plugin_defconfig index 549ca2e9643f..fcead94f57b3 100644 --- a/configs/mx7ulp_evk_plugin_defconfig +++ b/configs/mx7ulp_evk_plugin_defconfig @@ -20,6 +20,7 @@ CONFIG_IMX_RGPIO2P=y # CONFIG_MXC_GPIO is not set CONFIG_DM_I2C=y CONFIG_DM_MMC=y +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_FSL_ESDHC=y CONFIG_PINCTRL=y CONFIG_PINCTRL_IMX7ULP=y diff --git a/configs/odroid-xu3_defconfig b/configs/odroid-xu3_defconfig index 4ec4e5871c5d..b8ebd56bf9d3 100644 --- a/configs/odroid-xu3_defconfig +++ b/configs/odroid-xu3_defconfig @@ -34,6 +34,7 @@ CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y CONFIG_ADC=y CONFIG_ADC_EXYNOS=y CONFIG_DFU_MMC=y +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_MMC_DW=y CONFIG_SMC911X=y CONFIG_SMC911X_BASE=0x5000000 diff --git a/configs/omap5_uevm_defconfig b/configs/omap5_uevm_defconfig index 84d4e2b37cdc..9af25fdf9891 100644 --- a/configs/omap5_uevm_defconfig +++ b/configs/omap5_uevm_defconfig @@ -29,6 +29,7 @@ CONFIG_SCSI_AHCI=y CONFIG_DFU_MMC=y CONFIG_DFU_RAM=y CONFIG_CMD_TCA642X=y +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_MMC_OMAP_HS=y CONFIG_SCSI=y CONFIG_CONS_INDEX=3 diff --git a/configs/opos6uldev_defconfig b/configs/opos6uldev_defconfig index 7dbeaf1044fb..cf5f52ccd874 100644 --- a/configs/opos6uldev_defconfig +++ b/configs/opos6uldev_defconfig @@ -67,6 +67,7 @@ CONFIG_SYSCON=y CONFIG_DM_I2C=y CONFIG_SYS_I2C_MXC=y CONFIG_PWRSEQ=y +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_FSL_ESDHC=y CONFIG_PHYLIB=y CONFIG_PHY_MICREL=y diff --git a/configs/peach-pi_defconfig b/configs/peach-pi_defconfig index f441d5eb9706..002d0969fe72 100644 --- a/configs/peach-pi_defconfig +++ b/configs/peach-pi_defconfig @@ -37,6 +37,7 @@ CONFIG_I2C_ARB_GPIO_CHALLENGE=y CONFIG_CROS_EC_KEYB=y CONFIG_CROS_EC=y CONFIG_CROS_EC_SPI=y +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_MMC_DW=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_S5P=y diff --git a/configs/peach-pit_defconfig b/configs/peach-pit_defconfig index f091d24f4f3a..33245efc55c6 100644 --- a/configs/peach-pit_defconfig +++ b/configs/peach-pit_defconfig @@ -36,6 +36,7 @@ CONFIG_I2C_ARB_GPIO_CHALLENGE=y CONFIG_CROS_EC_KEYB=y CONFIG_CROS_EC=y CONFIG_CROS_EC_SPI=y +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_MMC_DW=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_S5P=y diff --git a/configs/pico-hobbit-imx6ul_defconfig b/configs/pico-hobbit-imx6ul_defconfig index b5ac3a3b260e..0bfe0678a9c8 100644 --- a/configs/pico-hobbit-imx6ul_defconfig +++ b/configs/pico-hobbit-imx6ul_defconfig @@ -44,6 +44,7 @@ CONFIG_FASTBOOT_CMD_OEM_FORMAT=y CONFIG_DM_GPIO=y CONFIG_DM_I2C=y CONFIG_DM_MMC=y +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_FSL_ESDHC=y CONFIG_PHYLIB=y CONFIG_PHY_MICREL=y diff --git a/configs/pico-hobbit-imx7d_defconfig b/configs/pico-hobbit-imx7d_defconfig index 59bc4249c7ed..24f69170a05e 100644 --- a/configs/pico-hobbit-imx7d_defconfig +++ b/configs/pico-hobbit-imx7d_defconfig @@ -46,6 +46,7 @@ CONFIG_FASTBOOT_BUF_SIZE=0x10000000 CONFIG_FASTBOOT_FLASH=y CONFIG_FASTBOOT_FLASH_MMC_DEV=0 CONFIG_FASTBOOT_CMD_OEM_FORMAT=y +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_FSL_ESDHC=y CONFIG_PHYLIB=y CONFIG_MII=y diff --git a/configs/pico-imx6ul_defconfig b/configs/pico-imx6ul_defconfig index f81b5a9692aa..366e3d381c59 100644 --- a/configs/pico-imx6ul_defconfig +++ b/configs/pico-imx6ul_defconfig @@ -46,6 +46,7 @@ CONFIG_FASTBOOT_CMD_OEM_FORMAT=y CONFIG_DM_GPIO=y CONFIG_DM_I2C=y CONFIG_DM_MMC=y +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_FSL_ESDHC=y CONFIG_PHYLIB=y CONFIG_PHY_MICREL=y diff --git a/configs/pico-imx7d_defconfig b/configs/pico-imx7d_defconfig index 3e870518610e..6ecd916ebd38 100644 --- a/configs/pico-imx7d_defconfig +++ b/configs/pico-imx7d_defconfig @@ -46,6 +46,7 @@ CONFIG_FASTBOOT_BUF_SIZE=0x10000000 CONFIG_FASTBOOT_FLASH=y CONFIG_FASTBOOT_FLASH_MMC_DEV=0 CONFIG_FASTBOOT_CMD_OEM_FORMAT=y +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_FSL_ESDHC=y CONFIG_PHYLIB=y CONFIG_MII=y diff --git a/configs/pico-pi-imx6ul_defconfig b/configs/pico-pi-imx6ul_defconfig index d6c39e4f9de8..17b3ba328ea5 100644 --- a/configs/pico-pi-imx6ul_defconfig +++ b/configs/pico-pi-imx6ul_defconfig @@ -44,6 +44,7 @@ CONFIG_FASTBOOT_CMD_OEM_FORMAT=y CONFIG_DM_GPIO=y CONFIG_DM_I2C=y CONFIG_DM_MMC=y +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_FSL_ESDHC=y CONFIG_PHYLIB=y CONFIG_PHY_MICREL=y diff --git a/configs/pico-pi-imx7d_defconfig b/configs/pico-pi-imx7d_defconfig index 20a34eb5627e..9e6f0ffa5432 100644 --- a/configs/pico-pi-imx7d_defconfig +++ b/configs/pico-pi-imx7d_defconfig @@ -46,6 +46,7 @@ CONFIG_FASTBOOT_BUF_SIZE=0x10000000 CONFIG_FASTBOOT_FLASH=y CONFIG_FASTBOOT_FLASH_MMC_DEV=0 CONFIG_FASTBOOT_CMD_OEM_FORMAT=y +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_FSL_ESDHC=y CONFIG_PHYLIB=y CONFIG_MII=y diff --git a/configs/riotboard_defconfig b/configs/riotboard_defconfig index da08bb89186b..6b0d7e58532e 100644 --- a/configs/riotboard_defconfig +++ b/configs/riotboard_defconfig @@ -21,6 +21,7 @@ CONFIG_CMD_CACHE=y CONFIG_CMD_EXT4_WRITE=y CONFIG_ENV_IS_IN_MMC=y CONFIG_DM=y +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_FSL_ESDHC=y CONFIG_SPI_FLASH=y CONFIG_SF_DEFAULT_MODE=0 diff --git a/configs/riotboard_spl_defconfig b/configs/riotboard_spl_defconfig index 65ab90614fe9..d30fc2f4ca83 100644 --- a/configs/riotboard_spl_defconfig +++ b/configs/riotboard_spl_defconfig @@ -30,6 +30,7 @@ CONFIG_CMD_CACHE=y CONFIG_CMD_EXT4_WRITE=y CONFIG_ENV_IS_IN_MMC=y CONFIG_DM=y +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_FSL_ESDHC=y CONFIG_SPI_FLASH=y CONFIG_SF_DEFAULT_MODE=0 diff --git a/configs/smdk5250_defconfig b/configs/smdk5250_defconfig index b9ab5192e929..bc34d21ca07a 100644 --- a/configs/smdk5250_defconfig +++ b/configs/smdk5250_defconfig @@ -32,6 +32,7 @@ CONFIG_DEFAULT_DEVICE_TREE="exynos5250-smdk5250" CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_USE_ENV_SPI_BUS=y CONFIG_ENV_SPI_BUS=1 +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_MMC_DW=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_S5P=y diff --git a/configs/smdk5420_defconfig b/configs/smdk5420_defconfig index dc17e66a1729..6e555e562270 100644 --- a/configs/smdk5420_defconfig +++ b/configs/smdk5420_defconfig @@ -27,6 +27,7 @@ CONFIG_DEFAULT_DEVICE_TREE="exynos5420-smdk5420" CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_USE_ENV_SPI_BUS=y CONFIG_ENV_SPI_BUS=1 +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_MMC_DW=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_S5P=y diff --git a/configs/snow_defconfig b/configs/snow_defconfig index 43576f7fd7b0..2d34711dd887 100644 --- a/configs/snow_defconfig +++ b/configs/snow_defconfig @@ -42,6 +42,7 @@ CONFIG_I2C_ARB_GPIO_CHALLENGE=y CONFIG_CROS_EC_KEYB=y CONFIG_CROS_EC=y CONFIG_CROS_EC_I2C=y +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_MMC_DW=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_S5P=y diff --git a/configs/spring_defconfig b/configs/spring_defconfig index 7ec9f674e561..7d4ae5ec08d4 100644 --- a/configs/spring_defconfig +++ b/configs/spring_defconfig @@ -42,6 +42,7 @@ CONFIG_I2C_ARB_GPIO_CHALLENGE=y CONFIG_CROS_EC_KEYB=y CONFIG_CROS_EC=y CONFIG_CROS_EC_I2C=y +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_MMC_DW=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_S5P=y diff --git a/configs/stm32mp15_basic_defconfig b/configs/stm32mp15_basic_defconfig index 6781adb81e73..88e1dfe96bc7 100644 --- a/configs/stm32mp15_basic_defconfig +++ b/configs/stm32mp15_basic_defconfig @@ -52,6 +52,7 @@ CONFIG_SYS_I2C_STM32F7=y CONFIG_LED=y CONFIG_LED_GPIO=y CONFIG_DM_MMC=y +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_STM32_SDMMC2=y CONFIG_PHY=y CONFIG_PHY_STM32_USBPHYC=y diff --git a/configs/stm32mp15_trusted_defconfig b/configs/stm32mp15_trusted_defconfig index a050cee6918e..c416c8ca447c 100644 --- a/configs/stm32mp15_trusted_defconfig +++ b/configs/stm32mp15_trusted_defconfig @@ -45,6 +45,7 @@ CONFIG_SYS_I2C_STM32F7=y CONFIG_LED=y CONFIG_LED_GPIO=y CONFIG_DM_MMC=y +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_STM32_SDMMC2=y CONFIG_PHY=y CONFIG_PHY_STM32_USBPHYC=y diff --git a/configs/uniphier_ld4_sld8_defconfig b/configs/uniphier_ld4_sld8_defconfig index e69649f30915..3102ebf6507d 100644 --- a/configs/uniphier_ld4_sld8_defconfig +++ b/configs/uniphier_ld4_sld8_defconfig @@ -39,6 +39,7 @@ CONFIG_GPIO_UNIPHIER=y CONFIG_MISC=y CONFIG_I2C_EEPROM=y CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=10 +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_MMC_UNIPHIER=y CONFIG_FLASH_CFI_DRIVER=y CONFIG_SYS_FLASH_CFI=y diff --git a/configs/uniphier_v7_defconfig b/configs/uniphier_v7_defconfig index 59ed7c2d74e4..75f8a7674ca9 100644 --- a/configs/uniphier_v7_defconfig +++ b/configs/uniphier_v7_defconfig @@ -38,6 +38,7 @@ CONFIG_GPIO_UNIPHIER=y CONFIG_MISC=y CONFIG_I2C_EEPROM=y CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=10 +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_MMC_UNIPHIER=y CONFIG_FLASH_CFI_DRIVER=y CONFIG_SYS_FLASH_CFI=y diff --git a/configs/uniphier_v8_defconfig b/configs/uniphier_v8_defconfig index b0c673c98e59..83f78776b7d2 100644 --- a/configs/uniphier_v8_defconfig +++ b/configs/uniphier_v8_defconfig @@ -34,6 +34,7 @@ CONFIG_MISC=y CONFIG_I2C_EEPROM=y CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=10 CONFIG_SUPPORT_EMMC_RPMB=y +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_MMC_HS200_SUPPORT=y CONFIG_MMC_UNIPHIER=y CONFIG_MMC_SDHCI=y diff --git a/configs/vinco_defconfig b/configs/vinco_defconfig index 5d929437bf35..745aa85f3b6d 100644 --- a/configs/vinco_defconfig +++ b/configs/vinco_defconfig @@ -27,6 +27,7 @@ CONFIG_CMD_FAT=y CONFIG_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="at91-vinco" CONFIG_ENV_IS_IN_SPI_FLASH=y +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_SPI_FLASH=y CONFIG_SF_DEFAULT_MODE=0 CONFIG_SF_DEFAULT_SPEED=50000000 diff --git a/configs/vining_2000_defconfig b/configs/vining_2000_defconfig index 5347ac8fe851..073ff4832968 100644 --- a/configs/vining_2000_defconfig +++ b/configs/vining_2000_defconfig @@ -33,6 +33,7 @@ CONFIG_CMD_FS_GENERIC=y CONFIG_EFI_PARTITION=y CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y CONFIG_SUPPORT_EMMC_RPMB=y +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_FSL_ESDHC=y CONFIG_PHYLIB=y CONFIG_MII=y diff --git a/configs/warp7_bl33_defconfig b/configs/warp7_bl33_defconfig index 6eaf152bace6..8290c5a4dc91 100644 --- a/configs/warp7_bl33_defconfig +++ b/configs/warp7_bl33_defconfig @@ -29,6 +29,7 @@ CONFIG_DFU_MMC=y CONFIG_DM_GPIO=y CONFIG_DM_I2C=y CONFIG_DM_MMC=y +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_FSL_ESDHC=y CONFIG_PINCTRL=y CONFIG_PINCTRL_IMX7=y diff --git a/configs/warp7_defconfig b/configs/warp7_defconfig index efd8860d28f3..0a0862ccfdcb 100644 --- a/configs/warp7_defconfig +++ b/configs/warp7_defconfig @@ -38,6 +38,7 @@ CONFIG_DFU_MMC=y CONFIG_DM_GPIO=y CONFIG_DM_I2C=y CONFIG_DM_MMC=y +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_FSL_ESDHC=y CONFIG_PINCTRL=y CONFIG_PINCTRL_IMX7=y diff --git a/configs/warp_defconfig b/configs/warp_defconfig index df43a7986978..a37d76929692 100644 --- a/configs/warp_defconfig +++ b/configs/warp_defconfig @@ -29,6 +29,7 @@ CONFIG_CMD_FS_GENERIC=y CONFIG_ENV_IS_IN_MMC=y # CONFIG_NET is not set CONFIG_DFU_MMC=y +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_FSL_ESDHC=y CONFIG_USB=y CONFIG_USB_STORAGE=y diff --git a/configs/xilinx_zynqmp_mini_emmc0_defconfig b/configs/xilinx_zynqmp_mini_emmc0_defconfig index d16ec756a99d..3c2ce615828c 100644 --- a/configs/xilinx_zynqmp_mini_emmc0_defconfig +++ b/configs/xilinx_zynqmp_mini_emmc0_defconfig @@ -52,6 +52,7 @@ CONFIG_SPL_DM=y # CONFIG_DM_WARN is not set # CONFIG_DM_DEVICE_REMOVE is not set CONFIG_SPL_DM_SEQ_ALIAS=y +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ZYNQ=y # CONFIG_EFI_LOADER is not set diff --git a/configs/xilinx_zynqmp_mini_emmc1_defconfig b/configs/xilinx_zynqmp_mini_emmc1_defconfig index 48b9b5d41d66..c347ef6eed34 100644 --- a/configs/xilinx_zynqmp_mini_emmc1_defconfig +++ b/configs/xilinx_zynqmp_mini_emmc1_defconfig @@ -52,6 +52,7 @@ CONFIG_SPL_DM=y # CONFIG_DM_WARN is not set # CONFIG_DM_DEVICE_REMOVE is not set CONFIG_SPL_DM_SEQ_ALIAS=y +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ZYNQ=y # CONFIG_EFI_LOADER is not set diff --git a/configs/xilinx_zynqmp_zc1275_revB_defconfig b/configs/xilinx_zynqmp_zc1275_revB_defconfig index aa44f0424337..5de861910cde 100644 --- a/configs/xilinx_zynqmp_zc1275_revB_defconfig +++ b/configs/xilinx_zynqmp_zc1275_revB_defconfig @@ -37,6 +37,7 @@ CONFIG_CLK_ZYNQMP=y CONFIG_FPGA_XILINX=y CONFIG_FPGA_ZYNQMPPL=y CONFIG_MISC=y +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ZYNQ=y CONFIG_SPI_FLASH=y diff --git a/configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig b/configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig index bf141c5e168a..ce1ea089ce8d 100644 --- a/configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig +++ b/configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig @@ -57,6 +57,7 @@ CONFIG_DM_GPIO=y CONFIG_DM_I2C=y CONFIG_SYS_I2C_CADENCE=y CONFIG_MISC=y +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_MMC_HS200_SUPPORT=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ZYNQ=y diff --git a/configs/xilinx_zynqmp_zc1751_xm017_dc3_defconfig b/configs/xilinx_zynqmp_zc1751_xm017_dc3_defconfig index 439f89e50f3c..877f5b230da3 100644 --- a/configs/xilinx_zynqmp_zc1751_xm017_dc3_defconfig +++ b/configs/xilinx_zynqmp_zc1751_xm017_dc3_defconfig @@ -49,6 +49,7 @@ CONFIG_DM_GPIO=y CONFIG_DM_I2C=y CONFIG_SYS_I2C_CADENCE=y CONFIG_MISC=y +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ZYNQ=y CONFIG_MTD_DEVICE=y diff --git a/configs/xilinx_zynqmp_zc1751_xm018_dc4_defconfig b/configs/xilinx_zynqmp_zc1751_xm018_dc4_defconfig index 6f14234a590e..7cd1c905f8b1 100644 --- a/configs/xilinx_zynqmp_zc1751_xm018_dc4_defconfig +++ b/configs/xilinx_zynqmp_zc1751_xm018_dc4_defconfig @@ -44,6 +44,7 @@ CONFIG_DM_GPIO=y CONFIG_DM_I2C=y CONFIG_SYS_I2C_CADENCE=y CONFIG_MISC=y +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ZYNQ=y CONFIG_SPI_FLASH=y diff --git a/configs/xilinx_zynqmp_zc1751_xm019_dc5_defconfig b/configs/xilinx_zynqmp_zc1751_xm019_dc5_defconfig index f1970aadf417..e42d401b54ea 100644 --- a/configs/xilinx_zynqmp_zc1751_xm019_dc5_defconfig +++ b/configs/xilinx_zynqmp_zc1751_xm019_dc5_defconfig @@ -43,6 +43,7 @@ CONFIG_DM_GPIO=y CONFIG_DM_I2C=y CONFIG_SYS_I2C_CADENCE=y CONFIG_MISC=y +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ZYNQ=y CONFIG_PHY_MARVELL=y diff --git a/configs/xilinx_zynqmp_zcu100_revC_defconfig b/configs/xilinx_zynqmp_zcu100_revC_defconfig index cd7d2f5376d2..90163001da9f 100644 --- a/configs/xilinx_zynqmp_zcu100_revC_defconfig +++ b/configs/xilinx_zynqmp_zcu100_revC_defconfig @@ -55,6 +55,7 @@ CONFIG_I2C_MUX_PCA954x=y CONFIG_LED=y CONFIG_LED_GPIO=y CONFIG_MISC=y +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ZYNQ=y CONFIG_SPI_FLASH=y diff --git a/configs/xilinx_zynqmp_zcu102_rev1_0_defconfig b/configs/xilinx_zynqmp_zcu102_rev1_0_defconfig index 371e6363db2f..62d23bf237c1 100644 --- a/configs/xilinx_zynqmp_zcu102_rev1_0_defconfig +++ b/configs/xilinx_zynqmp_zcu102_rev1_0_defconfig @@ -70,6 +70,7 @@ CONFIG_I2C_EEPROM=y CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0x20 CONFIG_SYS_I2C_EEPROM_ADDR=0x0 CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0 +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_MMC_IO_VOLTAGE=y CONFIG_MMC_UHS_SUPPORT=y CONFIG_MMC_SDHCI=y diff --git a/configs/xilinx_zynqmp_zcu102_revA_defconfig b/configs/xilinx_zynqmp_zcu102_revA_defconfig index a0fb6c3586cc..1fdee2fd384b 100644 --- a/configs/xilinx_zynqmp_zcu102_revA_defconfig +++ b/configs/xilinx_zynqmp_zcu102_revA_defconfig @@ -71,6 +71,7 @@ CONFIG_I2C_EEPROM=y CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0x20 CONFIG_SYS_I2C_EEPROM_ADDR=0x0 CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0 +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ZYNQ=y CONFIG_SPI_FLASH=y diff --git a/configs/xilinx_zynqmp_zcu102_revB_defconfig b/configs/xilinx_zynqmp_zcu102_revB_defconfig index db7c093d5ebc..ccc72c52887e 100644 --- a/configs/xilinx_zynqmp_zcu102_revB_defconfig +++ b/configs/xilinx_zynqmp_zcu102_revB_defconfig @@ -71,6 +71,7 @@ CONFIG_I2C_EEPROM=y CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0x20 CONFIG_SYS_I2C_EEPROM_ADDR=0x0 CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0 +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ZYNQ=y CONFIG_SPI_FLASH=y diff --git a/configs/xilinx_zynqmp_zcu104_revA_defconfig b/configs/xilinx_zynqmp_zcu104_revA_defconfig index eacf75d9f8e2..730640758a38 100644 --- a/configs/xilinx_zynqmp_zcu104_revA_defconfig +++ b/configs/xilinx_zynqmp_zcu104_revA_defconfig @@ -56,6 +56,7 @@ CONFIG_MISC=y CONFIG_I2C_EEPROM=y CONFIG_SYS_I2C_EEPROM_ADDR=0x0 CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0 +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ZYNQ=y CONFIG_SPI_FLASH=y diff --git a/configs/xilinx_zynqmp_zcu104_revC_defconfig b/configs/xilinx_zynqmp_zcu104_revC_defconfig index 1c9a6d6f1ec4..a4223ebdee54 100644 --- a/configs/xilinx_zynqmp_zcu104_revC_defconfig +++ b/configs/xilinx_zynqmp_zcu104_revC_defconfig @@ -57,6 +57,7 @@ CONFIG_I2C_EEPROM=y CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0x20 CONFIG_SYS_I2C_EEPROM_ADDR=0x0 CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0 +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ZYNQ=y CONFIG_SPI_FLASH=y diff --git a/configs/xilinx_zynqmp_zcu106_revA_defconfig b/configs/xilinx_zynqmp_zcu106_revA_defconfig index 1b685ca04925..ed56ece40158 100644 --- a/configs/xilinx_zynqmp_zcu106_revA_defconfig +++ b/configs/xilinx_zynqmp_zcu106_revA_defconfig @@ -66,6 +66,7 @@ CONFIG_I2C_EEPROM=y CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0x20 CONFIG_SYS_I2C_EEPROM_ADDR=0x0 CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0 +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ZYNQ=y CONFIG_SPI_FLASH=y diff --git a/configs/xilinx_zynqmp_zcu111_revA_defconfig b/configs/xilinx_zynqmp_zcu111_revA_defconfig index 74106d7ea8fa..13816205caea 100644 --- a/configs/xilinx_zynqmp_zcu111_revA_defconfig +++ b/configs/xilinx_zynqmp_zcu111_revA_defconfig @@ -58,6 +58,7 @@ CONFIG_I2C_EEPROM=y CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0x20 CONFIG_SYS_I2C_EEPROM_ADDR=0x0 CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0 +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ZYNQ=y CONFIG_SPI_FLASH=y diff --git a/configs/xpress_defconfig b/configs/xpress_defconfig index 2cbeeb390087..709a7ef90842 100644 --- a/configs/xpress_defconfig +++ b/configs/xpress_defconfig @@ -25,6 +25,7 @@ CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y CONFIG_ENV_IS_IN_MMC=y +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_FSL_ESDHC=y CONFIG_PHYLIB=y CONFIG_MII=y diff --git a/configs/xpress_spl_defconfig b/configs/xpress_spl_defconfig index cf4f0ed054a5..0026d60c2715 100644 --- a/configs/xpress_spl_defconfig +++ b/configs/xpress_spl_defconfig @@ -35,6 +35,7 @@ CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y CONFIG_ENV_IS_IN_MMC=y +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_FSL_ESDHC=y CONFIG_PHYLIB=y CONFIG_MII=y diff --git a/configs/zc5202_defconfig b/configs/zc5202_defconfig index 3c35bed1820c..8d8d172d2112 100644 --- a/configs/zc5202_defconfig +++ b/configs/zc5202_defconfig @@ -33,6 +33,7 @@ CONFIG_CMD_CACHE=y CONFIG_CMD_EXT4_WRITE=y CONFIG_ENV_IS_IN_MMC=y CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_FSL_ESDHC=y CONFIG_SPI_FLASH=y CONFIG_SF_DEFAULT_BUS=3 diff --git a/configs/zc5601_defconfig b/configs/zc5601_defconfig index 2f5de909ca2e..02f8da8fbaf6 100644 --- a/configs/zc5601_defconfig +++ b/configs/zc5601_defconfig @@ -32,6 +32,7 @@ CONFIG_CMD_CACHE=y CONFIG_CMD_EXT4_WRITE=y CONFIG_ENV_IS_IN_MMC=y CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_FSL_ESDHC=y CONFIG_SPI_FLASH=y CONFIG_SF_DEFAULT_BUS=3 diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig index c34dd5d18790..e96e69370728 100644 --- a/drivers/mmc/Kconfig +++ b/drivers/mmc/Kconfig @@ -78,6 +78,12 @@ config SUPPORT_EMMC_RPMB Enable support for reading, writing and programming the key for the Replay Protection Memory Block partition in eMMC. +config SUPPORT_EMMC_BOOT + bool "Support some additional features of the eMMC boot partitions" + help + Enable support for eMMC boot partitions. This also enables + extensions within the mmc command. + config MMC_IO_VOLTAGE bool "Support IO voltage configuration" help diff --git a/include/configs/advantech_dms-ba16.h b/include/configs/advantech_dms-ba16.h index 57edeee941e7..22d1e41bc8dc 100644 --- a/include/configs/advantech_dms-ba16.h +++ b/include/configs/advantech_dms-ba16.h @@ -21,8 +21,6 @@ #define CONFIG_LOADCMD "fatload" #define CONFIG_RFSPART "2" -#define CONFIG_SUPPORT_EMMC_BOOT - #include "mx6_common.h" #include <linux/sizes.h> diff --git a/include/configs/am57xx_evm.h b/include/configs/am57xx_evm.h index c14b010550fe..2c651aab178b 100644 --- a/include/configs/am57xx_evm.h +++ b/include/configs/am57xx_evm.h @@ -63,8 +63,6 @@ #define CONFIG_NET_RETRY_COUNT 10 #define PHY_ANEG_TIMEOUT 8000 /* PHY needs longer aneg time at 1G */ -#define CONFIG_SUPPORT_EMMC_BOOT - /* USB xHCI HOST */ #define CONFIG_USB_XHCI_OMAP diff --git a/include/configs/apalis-tk1.h b/include/configs/apalis-tk1.h index 1d296ba51a05..9c8c8979f046 100644 --- a/include/configs/apalis-tk1.h +++ b/include/configs/apalis-tk1.h @@ -18,9 +18,6 @@ #define CONFIG_TEGRA_ENABLE_UARTA #define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE -/* SD/MMC support */ -#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */ - /* Environment in eMMC, before config block at the end of 1st "boot sector" */ #define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE + \ CONFIG_TDX_CFG_BLOCK_OFFSET) diff --git a/include/configs/apalis_imx6.h b/include/configs/apalis_imx6.h index 96169f55f08c..135a0d78287e 100644 --- a/include/configs/apalis_imx6.h +++ b/include/configs/apalis_imx6.h @@ -46,8 +46,6 @@ #define CONFIG_SYS_FSL_ESDHC_ADDR 0 #define CONFIG_SYS_FSL_USDHC_NUM 3 -#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */ - /* * SATA Configs */ diff --git a/include/configs/arndale.h b/include/configs/arndale.h index 06b02ce90a94..dd321c4748d0 100644 --- a/include/configs/arndale.h +++ b/include/configs/arndale.h @@ -14,9 +14,6 @@ #include "exynos5250-common.h" #include <configs/exynos5-common.h> -/* SD/MMC configuration */ -#define CONFIG_SUPPORT_EMMC_BOOT - /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE diff --git a/include/configs/brppt1.h b/include/configs/brppt1.h index ae9b75bb87ad..1d30d4e38f76 100644 --- a/include/configs/brppt1.h +++ b/include/configs/brppt1.h @@ -31,11 +31,6 @@ /*#define CONFIG_MACH_TYPE 3589*/ #define CONFIG_MACH_TYPE 0xFFFFFFFF /* TODO: check with kernel*/ -/* MMC/SD IP block */ -#if defined(CONFIG_EMMC_BOOT) - #define CONFIG_SUPPORT_EMMC_BOOT -#endif /* CONFIG_EMMC_BOOT */ - /* * When we have NAND flash we expect to be making use of mtdparts, * both for ease of use in U-Boot and for passing information on to diff --git a/include/configs/cl-som-imx7.h b/include/configs/cl-som-imx7.h index 26d1a97891d8..4c93fc6cbea2 100644 --- a/include/configs/cl-som-imx7.h +++ b/include/configs/cl-som-imx7.h @@ -153,7 +153,6 @@ #define CONFIG_SYS_FSL_USDHC_NUM 2 #define CONFIG_MMCROOT "/dev/mmcblk0p2" /* USDHC1 */ -#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */ #endif /* USB Configs */ diff --git a/include/configs/clearfog.h b/include/configs/clearfog.h index 9f8d3cc9e5e8..d8bd59cc070b 100644 --- a/include/configs/clearfog.h +++ b/include/configs/clearfog.h @@ -26,10 +26,6 @@ */ #define CONFIG_SYS_MMC_BASE MVEBU_SDIO_BASE -#ifdef CONFIG_CMD_MMC -#define CONFIG_SUPPORT_EMMC_BOOT -#endif - /* USB/EHCI configuration */ #define CONFIG_EHCI_IS_TDI diff --git a/include/configs/cm_t54.h b/include/configs/cm_t54.h index cda1b5528ffa..2387f864e32b 100644 --- a/include/configs/cm_t54.h +++ b/include/configs/cm_t54.h @@ -41,7 +41,6 @@ /* Enhance our eMMC support / experience. */ #define CONFIG_HSMMC2_8BIT -#define CONFIG_SUPPORT_EMMC_BOOT /* SATA Boot related defines */ #define CONFIG_SPL_SATA_BOOT_DEVICE 0 diff --git a/include/configs/colibri_imx6.h b/include/configs/colibri_imx6.h index 803c9be0646b..acb79afb039c 100644 --- a/include/configs/colibri_imx6.h +++ b/include/configs/colibri_imx6.h @@ -44,8 +44,6 @@ #define CONFIG_SYS_FSL_ESDHC_ADDR 0 #define CONFIG_SYS_FSL_USDHC_NUM 2 -#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */ - /* Network */ #define CONFIG_FEC_MXC #define IMX_FEC_BASE ENET_BASE_ADDR diff --git a/include/configs/colibri_imx7.h b/include/configs/colibri_imx7.h index 5a4b9801cb77..7dfc92c085b9 100644 --- a/include/configs/colibri_imx7.h +++ b/include/configs/colibri_imx7.h @@ -35,8 +35,6 @@ #define CONFIG_SYS_FSL_USDHC_NUM 1 #elif CONFIG_TARGET_COLIBRI_IMX7_EMMC #define CONFIG_SYS_FSL_USDHC_NUM 2 - -#define CONFIG_SUPPORT_EMMC_BOOT #endif #undef CONFIG_BOOTM_PLAN9 diff --git a/include/configs/display5.h b/include/configs/display5.h index 8ab47abfa85d..8829cbad913c 100644 --- a/include/configs/display5.h +++ b/include/configs/display5.h @@ -83,7 +83,6 @@ #define CONFIG_FSL_USDHC #define CONFIG_SYS_FSL_ESDHC_ADDR 0 #define CONFIG_SYS_FSL_USDHC_NUM 2 -#define CONFIG_SUPPORT_EMMC_BOOT /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h index f6be6595fe3c..aec70ee7182d 100644 --- a/include/configs/dra7xx_evm.h +++ b/include/configs/dra7xx_evm.h @@ -96,8 +96,6 @@ /* SPI SPL */ #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x40000 -#define CONFIG_SUPPORT_EMMC_BOOT - /* USB xHCI HOST */ #define CONFIG_USB_XHCI_OMAP diff --git a/include/configs/dragonboard410c.h b/include/configs/dragonboard410c.h index cf021083ae28..7155ebac5c24 100644 --- a/include/configs/dragonboard410c.h +++ b/include/configs/dragonboard410c.h @@ -31,13 +31,6 @@ * it has to be done after each HCD reset */ #define CONFIG_EHCI_HCD_INIT_AFTER_RESET -/* Support all possible USB ethernet dongles */ - -/* Extra Commands */ -/* Enable that for switching of boot partitions */ -/* Disabled by default as some sub-commands can brick eMMC */ -/*#define CONFIG_SUPPORT_EMMC_BOOT */ - /* BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE diff --git a/include/configs/edison.h b/include/configs/edison.h index a6155ba5a8b9..218b50a1d9bb 100644 --- a/include/configs/edison.h +++ b/include/configs/edison.h @@ -34,7 +34,6 @@ #define CONFIG_ENV_SIZE (64 * 1024) #define CONFIG_ENV_OFFSET (3 * 1024 * 1024) #define CONFIG_ENV_OFFSET_REDUND (6 * 1024 * 1024) -#define CONFIG_SUPPORT_EMMC_BOOT /* RTC */ #define CONFIG_SYS_ISA_IO_BASE_ADDRESS 0 diff --git a/include/configs/embestmx6boards.h b/include/configs/embestmx6boards.h index 858bed012c63..8bc7a3ad2e13 100644 --- a/include/configs/embestmx6boards.h +++ b/include/configs/embestmx6boards.h @@ -76,7 +76,6 @@ #define CONFIG_SYS_FSL_USDHC_NUM 3 #define CONFIG_SYS_MMC_ENV_DEV 2 /* SDHC4 */ #define CONFIG_ENV_OFFSET (6 * 64 * 1024) -#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */ #elif defined(CONFIG_ENV_IS_IN_SPI_FLASH) /* MarSBoard */ #define CONFIG_FDTFILE "imx6q-marsboard.dtb" diff --git a/include/configs/exynos5-common.h b/include/configs/exynos5-common.h index db1fc934bbba..397bbf6d9d30 100644 --- a/include/configs/exynos5-common.h +++ b/include/configs/exynos5-common.h @@ -44,7 +44,6 @@ /* MMC SPL */ #define COPY_BL2_FNPTR_ADDR 0x02020030 -#define CONFIG_SUPPORT_EMMC_BOOT /* specific .lds file */ diff --git a/include/configs/ge_bx50v3.h b/include/configs/ge_bx50v3.h index 196f114c60e8..0481ed06a91f 100644 --- a/include/configs/ge_bx50v3.h +++ b/include/configs/ge_bx50v3.h @@ -19,9 +19,6 @@ #define CONFIG_MXC_UART_BASE UART3_BASE #define CONSOLE_DEV "ttymxc2" -#define CONFIG_SUPPORT_EMMC_BOOT - - #include "mx6_common.h" #include <linux/sizes.h> diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h index 93608e5aec4d..02ceb4c8fc8b 100644 --- a/include/configs/gw_ventana.h +++ b/include/configs/gw_ventana.h @@ -81,9 +81,6 @@ /* MMC Configs */ #define CONFIG_SYS_FSL_ESDHC_ADDR 0 -/* eMMC Configs */ -#define CONFIG_SUPPORT_EMMC_BOOT - /* * SATA Configs */ diff --git a/include/configs/imx6dl-mamoj.h b/include/configs/imx6dl-mamoj.h index 030dbedce81b..7605e145c2f3 100644 --- a/include/configs/imx6dl-mamoj.h +++ b/include/configs/imx6dl-mamoj.h @@ -51,7 +51,6 @@ /* MMC */ #define CONFIG_SYS_MMC_ENV_DEV 2 -#define CONFIG_SUPPORT_EMMC_BOOT /* Ethernet */ #define CONFIG_FEC_MXC_PHYADDR 1 diff --git a/include/configs/imx8mq_evk.h b/include/configs/imx8mq_evk.h index 6094d1bf1800..35c1b65079e1 100644 --- a/include/configs/imx8mq_evk.h +++ b/include/configs/imx8mq_evk.h @@ -225,7 +225,6 @@ #define CONFIG_SYS_FSL_USDHC_NUM 2 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */ #define CONFIG_SYS_MMC_IMG_LOAD_PART 1 #define CONFIG_MXC_GPIO diff --git a/include/configs/imx8qxp_mek.h b/include/configs/imx8qxp_mek.h index 312e30dc6c18..3259febdb94f 100644 --- a/include/configs/imx8qxp_mek.h +++ b/include/configs/imx8qxp_mek.h @@ -54,7 +54,6 @@ #define CONFIG_SYS_FSL_ESDHC_ADDR 0 #define USDHC1_BASE_ADDR 0x5B010000 #define USDHC2_BASE_ADDR 0x5B020000 -#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */ #define CONFIG_ENV_OVERWRITE diff --git a/include/configs/liteboard.h b/include/configs/liteboard.h index a97ccb50b2ff..975f32474c4a 100644 --- a/include/configs/liteboard.h +++ b/include/configs/liteboard.h @@ -24,7 +24,6 @@ /* MMC Configs */ #ifdef CONFIG_FSL_USDHC #define CONFIG_SYS_FSL_ESDHC_ADDR USDHC1_BASE_ADDR -#define CONFIG_SUPPORT_EMMC_BOOT #endif #define CONFIG_SYS_MMC_IMG_LOAD_PART 1 diff --git a/include/configs/mt7623.h b/include/configs/mt7623.h index e449364ad48a..5f67893f3127 100644 --- a/include/configs/mt7623.h +++ b/include/configs/mt7623.h @@ -42,7 +42,6 @@ /* MMC */ #define MMC_SUPPORTS_TUNING -#define CONFIG_SUPPORT_EMMC_BOOT /* DRAM */ #define CONFIG_SYS_SDRAM_BASE 0x80000000 diff --git a/include/configs/mx6sabresd.h b/include/configs/mx6sabresd.h index 555942a2c2ab..ec1537541aea 100644 --- a/include/configs/mx6sabresd.h +++ b/include/configs/mx6sabresd.h @@ -16,8 +16,6 @@ #define CONFIG_MXC_UART_BASE UART1_BASE #define CONSOLE_DEV "ttymxc0" -#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */ - #include "mx6sabre_common.h" /* Falcon Mode */ diff --git a/include/configs/mx7dsabresd.h b/include/configs/mx7dsabresd.h index 39d29de74468..77856a8f3a47 100644 --- a/include/configs/mx7dsabresd.h +++ b/include/configs/mx7dsabresd.h @@ -38,7 +38,6 @@ #define CONFIG_SYS_I2C_MXC #define CONFIG_SYS_I2C_SPEED 100000 -#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */ #define CONFIG_SYS_MMC_IMG_LOAD_PART 1 #ifdef CONFIG_IMX_BOOTAUX diff --git a/include/configs/mx7ulp_evk.h b/include/configs/mx7ulp_evk.h index b8dcaa10361d..5bd63929735e 100644 --- a/include/configs/mx7ulp_evk.h +++ b/include/configs/mx7ulp_evk.h @@ -28,7 +28,6 @@ #define IOMUXC_BASE_ADDR IOMUXC1_RBASE #define CONFIG_FSL_USDHC -#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */ #define CONFIG_SYS_FSL_USDHC_NUM 1 diff --git a/include/configs/omap5_uevm.h b/include/configs/omap5_uevm.h index 66bd288040c1..0d8f945349dc 100644 --- a/include/configs/omap5_uevm.h +++ b/include/configs/omap5_uevm.h @@ -39,7 +39,6 @@ /* Enhance our eMMC support / experience. */ #define CONFIG_HSMMC2_8BIT -#define CONFIG_SUPPORT_EMMC_BOOT /* Required support for the TCA642X GPIO we have on the uEVM */ #define CONFIG_TCA642X diff --git a/include/configs/opos6uldev.h b/include/configs/opos6uldev.h index 70cf4665df37..e0c76ff43daa 100644 --- a/include/configs/opos6uldev.h +++ b/include/configs/opos6uldev.h @@ -33,9 +33,6 @@ #define CONFIG_SYS_INIT_SP_ADDR \ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) -/* MMC */ -#define CONFIG_SUPPORT_EMMC_BOOT - /* USB */ #ifdef CONFIG_USB_EHCI_MX6 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET diff --git a/include/configs/pico-imx6ul.h b/include/configs/pico-imx6ul.h index 050f69801b47..cd051bf263f8 100644 --- a/include/configs/pico-imx6ul.h +++ b/include/configs/pico-imx6ul.h @@ -41,7 +41,6 @@ /* MMC Configs */ #define CONFIG_SYS_FSL_ESDHC_ADDR USDHC1_BASE_ADDR -#define CONFIG_SUPPORT_EMMC_BOOT /* USB Configs */ #define CONFIG_EHCI_HCD_INIT_AFTER_RESET diff --git a/include/configs/pico-imx7d.h b/include/configs/pico-imx7d.h index 0f6d6b789454..0fcecacc0e98 100644 --- a/include/configs/pico-imx7d.h +++ b/include/configs/pico-imx7d.h @@ -58,7 +58,6 @@ "bootmenu_1=Boot using PICO-Pi baseboard=" \ "setenv fdtfile imx7d-pico-pi.dtb\0" \ -#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */ #define CONFIG_SYS_MMC_IMG_LOAD_PART 1 #define CONFIG_EXTRA_ENV_SETTINGS \ diff --git a/include/configs/stm32mp1.h b/include/configs/stm32mp1.h index 737dfd6a5c2a..546d7bc88029 100644 --- a/include/configs/stm32mp1.h +++ b/include/configs/stm32mp1.h @@ -78,7 +78,6 @@ /*MMC SD*/ #define CONFIG_SYS_MMC_MAX_DEVICE 3 -#define CONFIG_SUPPORT_EMMC_BOOT /*****************************************************************************/ #ifdef CONFIG_DISTRO_DEFAULTS diff --git a/include/configs/uniphier.h b/include/configs/uniphier.h index 1e509ce9ad7b..3edff50a86be 100644 --- a/include/configs/uniphier.h +++ b/include/configs/uniphier.h @@ -94,9 +94,6 @@ #define CONFIG_SYS_NAND_DATA_BASE 0x68000000 #define CONFIG_SYS_NAND_BAD_BLOCK_POS 0 -/* SD/MMC */ -#define CONFIG_SUPPORT_EMMC_BOOT - /* memtest works on */ #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x01000000) diff --git a/include/configs/vinco.h b/include/configs/vinco.h index ec22a30cda12..eebb3f7ca789 100644 --- a/include/configs/vinco.h +++ b/include/configs/vinco.h @@ -43,7 +43,6 @@ /* MMC */ #ifdef CONFIG_CMD_MMC -#define CONFIG_SUPPORT_EMMC_BOOT #define CONFIG_GENERIC_ATMEL_MCI #define ATMEL_BASE_MMCI 0xfc000000 #define CONFIG_SYS_MMC_CLK_OD 500000 diff --git a/include/configs/vining_2000.h b/include/configs/vining_2000.h index d3cbdc6f2e49..fd98c1417e70 100644 --- a/include/configs/vining_2000.h +++ b/include/configs/vining_2000.h @@ -95,7 +95,6 @@ #define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE #ifdef CONFIG_ENV_IS_IN_MMC -#define CONFIG_SUPPORT_EMMC_BOOT #define CONFIG_SYS_MMC_ENV_DEV 0 /* USDHC4 eMMC */ /* 0=user, 1=boot0, 2=boot1, * 4..7=general0..3. */ #define CONFIG_SYS_MMC_ENV_PART 1 /* boot0 */ diff --git a/include/configs/warp.h b/include/configs/warp.h index 9aa8a48d3d85..5345f5314d66 100644 --- a/include/configs/warp.h +++ b/include/configs/warp.h @@ -23,7 +23,6 @@ /* MMC Configs */ #define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR #define CONFIG_SYS_FSL_ESDHC_HAS_DDR_MODE -#define CONFIG_SUPPORT_EMMC_BOOT /* Watchdog */ #define CONFIG_WATCHDOG_TIMEOUT_MSECS 30000 /* 30s */ diff --git a/include/configs/warp7.h b/include/configs/warp7.h index 043f2861b62d..82c483999031 100644 --- a/include/configs/warp7.h +++ b/include/configs/warp7.h @@ -31,7 +31,6 @@ /* MMC Config*/ #define CONFIG_SYS_FSL_ESDHC_ADDR USDHC3_BASE_ADDR -#define CONFIG_SUPPORT_EMMC_BOOT #define CONFIG_SYS_FSL_ESDHC_HAS_DDR_MODE #define CONFIG_SYS_MMC_IMG_LOAD_PART 1 diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h index 91ae7088a50a..5759b44d2695 100644 --- a/include/configs/xilinx_zynqmp.h +++ b/include/configs/xilinx_zynqmp.h @@ -47,10 +47,6 @@ #define CONFIG_BOOTP_BOOTFILESIZE #define CONFIG_BOOTP_MAY_FAIL -#if defined(CONFIG_MMC_SDHCI_ZYNQ) -# define CONFIG_SUPPORT_EMMC_BOOT -#endif - #ifdef CONFIG_NAND_ARASAN # define CONFIG_SYS_MAX_NAND_DEVICE 1 # define CONFIG_SYS_NAND_ONFI_DETECTION diff --git a/include/configs/xpress.h b/include/configs/xpress.h index 08e0ca0c8f15..4cbf8aa5261d 100644 --- a/include/configs/xpress.h +++ b/include/configs/xpress.h @@ -21,7 +21,6 @@ /* MMC Configs */ #define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR -#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */ /* I2C configs */ #define CONFIG_SYS_I2C diff --git a/include/configs/zc5202.h b/include/configs/zc5202.h index 40d33f7830a5..77ff04754bc9 100644 --- a/include/configs/zc5202.h +++ b/include/configs/zc5202.h @@ -12,8 +12,6 @@ #define CONSOLE_DEV "ttymxc1" #define CONFIG_MMCROOT "/dev/mmcblk0p2" -#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */ - #include "el6x_common.h" /* Ethernet */ diff --git a/include/configs/zc5601.h b/include/configs/zc5601.h index b9673e2c0651..e4fe7a462d23 100644 --- a/include/configs/zc5601.h +++ b/include/configs/zc5601.h @@ -13,8 +13,6 @@ #define CONSOLE_DEV "ttymxc1" #define CONFIG_MMCROOT "/dev/mmcblk0p1" -#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */ - #include "el6x_common.h" /* Ethernet */ diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index 5092c3fb4ce5..78ccef49fd11 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -1940,7 +1940,6 @@ CONFIG_ST_SMI CONFIG_SUNXI_GPIO CONFIG_SUNXI_MAX_FB_SIZE CONFIG_SUPERH_ON_CHIP_R8A66597 -CONFIG_SUPPORT_EMMC_BOOT CONFIG_SUVD3 CONFIG_SXNI855T CONFIG_SYSFLAGS_ADDR -- 2.17.1

8 10

[U-Boot] [PATCH] board: stm32mp1: Update power supply check via USB TYPE-C
by Patrice Chotard 30 Apr '19

30 Apr '19

Add 2 new checks: - detect when USB TYPE-C cable is not plugged correctly. In this case, GND and VBUS pins are connected but not CC1 and CC2 pins. - detect is an USB Type-C charger supplies more than 3 Amps which is not compliant with the USB Type-C specification In these 2 situations, stop the boot process and let red led blinks forever. V cc1 | V cc2 | power supply | red led | console message range (Volts) |range (Volts)| (Amps) | blinks | --------------|-------------|--------------|---------|----------------------------------- > 2.15 | < 0.2 | > 3 | for ever| USB TYPE-C charger not compliant with specification [2.15 - 1.23[ | < 0.2 | 3 | NO | NO [1.23 - 0.66[ | < 0.2 | 1.5 | 3 times | WARNING 1.5A power supply detected [0.66 - 0] | < 0.2 | 0.5 | 2 times | WARNING 500mA power supply detected < 0.2 | < 0.2 | | for ever| ERROR USB TYPE-C connection in unattached mode > 0.2 | > 0.2 | | for ever| ERROR USB TYPE-C connection in unattached mode Signed-off-by: Patrice Chotard <patrice.chotard(a)st.com> --- board/st/stm32mp1/stm32mp1.c | 69 +++++++++++++++++++++++++++++++++++--------- 1 file changed, 56 insertions(+), 13 deletions(-) diff --git a/board/st/stm32mp1/stm32mp1.c b/board/st/stm32mp1/stm32mp1.c index 76917b0..8c591a5 100644 --- a/board/st/stm32mp1/stm32mp1.c +++ b/board/st/stm32mp1/stm32mp1.c @@ -60,9 +60,10 @@ */ DECLARE_GLOBAL_DATA_PTR; +#define USB_LOW_THRESHOLD_UV 200000 #define USB_WARNING_LOW_THRESHOLD_UV 660000 #define USB_START_LOW_THRESHOLD_UV 1230000 -#define USB_START_HIGH_THRESHOLD_UV 2100000 +#define USB_START_HIGH_THRESHOLD_UV 2150000 int checkboard(void) { @@ -263,9 +264,10 @@ static int board_check_usb_power(void) ofnode node; unsigned int raw; int max_uV = 0; + int min_uV = USB_START_HIGH_THRESHOLD_UV; int ret, uV, adc_count; - u8 i, nb_blink; - + u32 nb_blink; + u8 i; node = ofnode_path("/config"); if (!ofnode_valid(node)) { debug("%s: no /config node?\n", __func__); @@ -317,6 +319,8 @@ static int board_check_usb_power(void) if (!adc_raw_to_uV(adc, raw, &uV)) { if (uV > max_uV) max_uV = uV; + if (uV < min_uV) + min_uV = uV; pr_debug("%s: %s[%02d] = %u, %d uV\n", __func__, adc->name, adc_args.args[0], raw, uV); } else { @@ -331,27 +335,66 @@ static int board_check_usb_power(void) * continue. */ if (max_uV > USB_START_LOW_THRESHOLD_UV && - max_uV < USB_START_HIGH_THRESHOLD_UV) + max_uV <= USB_START_HIGH_THRESHOLD_UV && + min_uV <= USB_LOW_THRESHOLD_UV) return 0; - /* Display warning message and make u-boot,error-led blinking */ - pr_err("\n*******************************************\n"); + pr_err("****************************************************\n"); + + /* + * If highest and lowest value are either both below + * USB_LOW_THRESHOLD_UV or both above USB_LOW_THRESHOLD_UV, that + * means USB TYPE-C is in unattached mode, this is an issue, make + * u-boot,error-led blinking and stop boot process. + */ + if ((max_uV > USB_LOW_THRESHOLD_UV && + min_uV > USB_LOW_THRESHOLD_UV) || + (max_uV <= USB_LOW_THRESHOLD_UV && + min_uV <= USB_LOW_THRESHOLD_UV)) { + pr_err("* ERROR USB TYPE-C connection in unattached mode *\n"); + pr_err("* Check that USB TYPE-C cable is correctly plugged *\n"); + /* with 125ms interval, led will blink for 17.02 years ....*/ + nb_blink = U32_MAX; + } - if (max_uV < USB_WARNING_LOW_THRESHOLD_UV) { - pr_err("* WARNING 500mA power supply detected *\n"); + if (max_uV > USB_LOW_THRESHOLD_UV && + max_uV <= USB_WARNING_LOW_THRESHOLD_UV && + min_uV <= USB_LOW_THRESHOLD_UV) { + pr_err("* WARNING 500mA power supply detected *\n"); nb_blink = 2; - } else { - pr_err("* WARNING 1.5A power supply detected *\n"); + } + + if (max_uV > USB_WARNING_LOW_THRESHOLD_UV && + max_uV <= USB_START_LOW_THRESHOLD_UV && + min_uV <= USB_LOW_THRESHOLD_UV) { + pr_err("* WARNING 1.5mA power supply detected *\n"); nb_blink = 3; } - pr_err("* Current too low, use a 3A power supply! *\n"); - pr_err("*******************************************\n\n"); + /* + * If highest value is above 2.15 Volts that means that the USB TypeC + * supplies more than 3 Amp, this is not compliant with TypeC specification + */ + if (max_uV > USB_START_HIGH_THRESHOLD_UV) { + pr_err("* USB TYPE-C charger not compliant with *\n"); + pr_err("* specification *\n"); + pr_err("****************************************************\n\n"); + /* with 125ms interval, led will blink for 17.02 years ....*/ + nb_blink = U32_MAX; + } else { + pr_err("* Current too low, use a 3A power supply! *\n"); + pr_err("****************************************************\n\n"); + } ret = get_led(&led, "u-boot,error-led"); - if (ret) + if (ret) { + /* in unattached case, the boot process must be stopped */ + if (nb_blink == U32_MAX) + hang(); return ret; + } + /* make u-boot,error-led blinking */ for (i = 0; i < nb_blink * 2; i++) { led_set_state(led, LEDST_TOGGLE); mdelay(125); -- 1.9.1

1 0

[U-Boot] [PATCH 0/3] Add SPI driver suport for STM32MP1
by Patrice Chotard 30 Apr '19

30 Apr '19

This series: - adds SPI1 clock entry in clock driver - adds STM32MP1 SPI driver - enables SPI for STM32MP1 Patrice Chotard (3): clk: stm32mp1: Add SPI1 clock entry spi: stm32: Add Serial Peripheral Interface driver for STM32MP configs: stm32mp15: Enable SPI relative flags MAINTAINERS | 1 + configs/stm32mp15_basic_defconfig | 4 + configs/stm32mp15_trusted_defconfig | 4 + drivers/clk/clk_stm32mp1.c | 7 + drivers/spi/Kconfig | 8 + drivers/spi/Makefile | 1 + drivers/spi/stm32_spi.c | 615 ++++++++++++++++++++++++++++++++++++ 7 files changed, 640 insertions(+) create mode 100644 drivers/spi/stm32_spi.c -- 1.9.1

1 3

[U-Boot] [PATCH 1/2 v2] i2c: mxc_i2c: Document how non-DM functions work
by Trent Piepho 30 Apr '19

30 Apr '19

It is not very clear how these work in relation to the exact I2C xfers they produce. In paticular, the address length is somewhat overloaded in the read method. Clearly document the existing behavior. Maybe this will help the next person who needs to work on this driver and not break non-DM boards. Cc: Nandor Han <nandor.han(a)ge.com> Cc: Heiko Schocher <hs(a)denx.de> Cc: Stefano Babic <sbabic(a)denx.de> Cc: Fabio Estevam <festevam(a)gmail.com> Cc: Breno Matheus Lima <brenomatheus(a)gmail.com> Signed-off-by: Trent Piepho <tpiepho(a)impinj.com> --- Changes from v1: None, re-sending as base64 to avoid Microsoft email mangling. drivers/i2c/mxc_i2c.c | 34 ++++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+) diff --git a/drivers/i2c/mxc_i2c.c b/drivers/i2c/mxc_i2c.c index 5420afbc8e..f17a47f600 100644 --- a/drivers/i2c/mxc_i2c.c +++ b/drivers/i2c/mxc_i2c.c @@ -540,6 +540,25 @@ static int i2c_read_data(struct mxc_i2c_bus *i2c_bus, uchar chip, uchar *buf, #ifndef CONFIG_DM_I2C /* * Read data from I2C device + * + * The transactions use the syntax defined in the Linux kernel I2C docs. + * + * If alen is > 0, then this function will send a transaction of the form: + * S Chip Wr [A] Addr [A] S Chip Rd [A] [data] A ... NA P + * This is a normal I2C register read: writing the register address, then doing + * a repeated start and reading the data. + * + * If alen == 0, then we get this transaction: + * S Chip Wr [A] S Chip Rd [A] [data] A ... NA P + * This is somewhat unusual, though valid, transaction. It addresses the chip + * in write mode, but doesn't actually write any register address or data, then + * does a repeated start and reads data. + * + * If alen < 0, then we get this transaction: + * S Chip Rd [A] [data] A ... NA P + * The chip is addressed in read mode and then data is read. No register + * address is written first. This is perfectly valid on most devices and + * required on some (usually those that don't act like an array of registers). */ static int bus_i2c_read(struct mxc_i2c_bus *i2c_bus, u8 chip, u32 addr, int alen, u8 *buf, int len) @@ -574,6 +593,20 @@ static int bus_i2c_read(struct mxc_i2c_bus *i2c_bus, u8 chip, u32 addr, /* * Write data to I2C device + * + * If alen > 0, we get this transaction: + * S Chip Wr [A] addr [A] data [A] ... [A] P + * An ordinary write register command. + * + * If alen == 0, then we get this: + * S Chip Wr [A] data [A] ... [A] P + * This is a simple I2C write. + * + * If alen < 0, then we get this: + * S data [A] ... [A] P + * This is most likely NOT something that should be used. It doesn't send the + * chip address first, so in effect, the first byte of data will be used as the + * address. */ static int bus_i2c_write(struct mxc_i2c_bus *i2c_bus, u8 chip, u32 addr, int alen, const u8 *buf, int len) @@ -881,6 +914,7 @@ static int mxc_i2c_probe(struct udevice *bus) return 0; } +/* Sends: S Addr Wr [A|NA] P */ static int mxc_i2c_probe_chip(struct udevice *bus, u32 chip_addr, u32 chip_flags) { -- 2.14.5

1 1

[U-Boot] [PATCH 0/4 RFC] imx: Implement job-ring context switching
by Bryan O'Donoghue 30 Apr '19

30 Apr '19

This series implements an RFC to save/restore CAAM settings for the job-rings prior to performing DEK blob verification. This follows on from a converstion with Breno and Fabio where we discussed how i.MX HAB implementations for the i.MX6 and i.MX7 will verify job-ring ownership when doing DEK blob verification, which contrasts to HAB authenticate image callbacks. https://marc.info/?l=u-boot&m=155448099126800&w=2 The objective is to make job-ring ownership normal-world when handing over from u-boot, so that a secure-world or normal-world Linux kernel has full access to the CAAM job-rings. By switching job-ring ownership to secure world prior to DEK blob verification, we ensure the BootROM will be happy with the job-ring ownership bits. Once DEK verification is complete we switch the job rings back to normal world so that subsequent boot phases can be in either secure or normal world. Please note: compile tested but not runtime tested, I don't currently have DEK blob encrypted images to test against - hence RFC on this patchset. Bryan O'Donoghue (4): crypto/fsl: Introduce API to save/restore job-ring context crypto/fsl: Use __sec_set_jr_context_normal powerpc: mpc85xx: crypto: Implement mpc85xxx specific job-ring fix crypto/fsl: Wrapper run_descriptor_jr_idx() to set jr permissions arch/powerpc/cpu/mpc85xx/cpu_init.c | 22 ++++++++++++ drivers/crypto/fsl/jr.c | 53 +++++++++++++++++++++++++---- include/fsl_sec.h | 3 ++ 3 files changed, 71 insertions(+), 7 deletions(-) -- 2.20.1

2 10

[U-Boot] [PATCH 0/4] Tidy up some dangling OP-TEE gotchas
by Bryan O'Donoghue 30 Apr '19

30 Apr '19

Rober P Day rightly pointed out that some odd OP-TEE specific defines were appearing in his defconfig, despite not having CONFIG_OPTEE=y set in his defconfig. Looking into this with a small bit of restructure we can fix this corner case. - Make sure OP-TEE CONFIG options only appear when you are compiling for OPTEE - Fix WaRP7 BL33 so that the low-level init skipping routines can tolerate the afore mentioned change. - Update MAINTAINERS with my own details so that questions pertaining to lib/optee comes my way. Bryan O'Donoghue (4): optee: Make TZDRAM config options contingent on CONFIG_OPTEE warp7: include: configs: Skip low-level init if BOOTM_OPTEE false warp7: configs: bl33: Tidy up OPTEE defines MAINTAINERS: Update lib/optee with my details MAINTAINERS | 5 +++++ configs/warp7_bl33_defconfig | 4 +++- include/configs/warp7.h | 4 +--- lib/optee/Kconfig | 2 ++ 4 files changed, 11 insertions(+), 4 deletions(-) -- 2.20.1

3 7

[U-Boot] (no subject)
by Adam Ford 30 Apr '19

30 Apr '19

>From 323b5ea0eec7aac821eb2319ca0debda711e8bec Mon Sep 17 00:00:00 2001 From: Adam Ford <aford173(a)gmail.com> Date: Sun, 28 Apr 2019 16:42:42 -0500 Subject: [PATCH 0/4] Enable Host OHCI USB controller wtih DM_USB This series enables some commented-out code, resurrects some older code and enables DA850 OHCI USB Host controller on the da850evm Adam Ford (4): usb: ohci: Re-enable commented out delay ARM: davinci: Remove unused functions from header usb: ohci: ohci-da8xx: Enable da850-ohci driver with DM support ARM: da850evm: Enable da850-ohci USB host controller .../arm/mach-davinci/include/mach/da8xx-usb.h | 3 - configs/da850evm_defconfig | 7 +- drivers/usb/host/Kconfig | 5 + drivers/usb/host/ohci-da8xx.c | 147 +++++++++++++++++- drivers/usb/host/ohci-hcd.c | 2 - include/configs/da850evm.h | 8 + 6 files changed, 165 insertions(+), 7 deletions(-) -- 2.17.1

2 9

[U-Boot] [PATCH] dts: arm: socfpga: fix socfpga_de10_nano console
by Simon Goldschmidt 30 Apr '19

30 Apr '19

Booting this board failed as the initial console isn't found since commit c402e8170245 ("dts: arm: socfpga: merge gen5 devicetrees from linux") The uart0 devicetree entry was missing "clock-frequency = <100000000>:" since that commit Fixes: c402e8170245 ("dts: arm: socfpga: merge gen5 devicetrees from linux") Reported-by: rafael mello <rafaelmello_3(a)hotmail.com> Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt(a)gmail.com> --- arch/arm/dts/socfpga_cyclone5_de10_nano.dts | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/dts/socfpga_cyclone5_de10_nano.dts b/arch/arm/dts/socfpga_cyclone5_de10_nano.dts index b620dd8dda..4be4083941 100644 --- a/arch/arm/dts/socfpga_cyclone5_de10_nano.dts +++ b/arch/arm/dts/socfpga_cyclone5_de10_nano.dts @@ -77,6 +77,7 @@ }; &uart0 { + clock-frequency = <100000000>; u-boot,dm-pre-reloc; }; -- 2.20.1

2 6

[U-Boot] [PATCH] i2c: mvtwsi: Fix delay time for Turris Omnia
by Marek Behún 30 Apr '19

30 Apr '19

Commit c68c6243 ("i2c: mvtwsi: Make delay times frequency-dependent") broke the default configuration of the Turris Omnia target. With i2c frequency at 100kHz the twsi_wait function call to ndelay(tick) the tick variable is computed to 10340 (nanoseconds). Since ndelay calls udelay(DIV_ROUND_UP(10340, 1000), the result is udelay(11). For some reason this sometimes (cca every third boot) breaks the i2c controller on Turris Omnia completely (even kernel cannot use it, and soft reset does not help, only complete power off). Microcontroller watchdog cannot be disabled without i2c and the device is unusable. The original commit message mentions erratum FE-8471889. This is weird since Linux does not enable this erratum workaround for armada-38x. But the commit message says that it was tested on Armada MV88F6820. I therefore fix this in this unclean way only for Turris Omnia, because I do not know if it would not break other devices. Signed-off-by: Marek Behún <marek.behun(a)nic.cz> Cc: Mario Six <mario.six(a)gdsys.cc> Cc: Stefan Roese <sr(a)denx.de> --- drivers/i2c/mvtwsi.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/i2c/mvtwsi.c b/drivers/i2c/mvtwsi.c index b0f7c3e057..ef269f3b0c 100644 --- a/drivers/i2c/mvtwsi.c +++ b/drivers/i2c/mvtwsi.c @@ -176,9 +176,13 @@ enum mvtwsi_ack_flags { */ inline uint calc_tick(uint speed) { +#ifdef CONFIG_TARGET_TURRIS_OMNIA + return 10000; +#else /* One tick = the duration of a period at the specified speed in ns (we * add 100 ns to be on the safe side) */ return (1000000000u / speed) + 100; +#endif } #ifndef CONFIG_DM_I2C -- 2.21.0

4 5