September 2017 - U-Boot

[U-Boot] QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA
by Hannes Schmelzer 27 Sep '17

27 Sep '17

Hi Eldor, just found your post in the mailinglist. https://lists.denx.de/pipermail/u-boot/2016-December/276491.html Reason why i'm searched there is, that i've now excactly same problem as you. ---- ---- I'm using most current mainline u-boot. did you ever found some solution for your trouble ? cheers, Hannes

4 6

[U-Boot] [PATCH 1/1] GPT: incomplete initialization in allocate_disk_part
by Heinrich Schuchardt 27 Sep '17

27 Sep '17

memset(newpart, '\0', sizeof(newpart)); only initializes the firest 4 or 8 bytes of *newpart and not the whole structure disk_part. We should use sizeof(struct disk_part). Identified by cppcheck. Fixes: 09a49930e41 GPT: read partition table from device into a data structure Signed-off-by: Heinrich Schuchardt <xypron.glpk(a)gmx.de> --- cmd/gpt.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/cmd/gpt.c b/cmd/gpt.c index 638aa19826..a9c562123f 100644 --- a/cmd/gpt.c +++ b/cmd/gpt.c @@ -190,10 +190,10 @@ static void del_gpt_info(void) static struct disk_part *allocate_disk_part(disk_partition_t *info, int partnum) { struct disk_part *newpart; - newpart = malloc(sizeof(*newpart)); + newpart = malloc(sizeof(struct disk_part)); if (!newpart) return ERR_PTR(-ENOMEM); - memset(newpart, '\0', sizeof(newpart)); + memset(newpart, '\0', sizeof(struct disk_part)); newpart->gpt_part_info.start = info->start; newpart->gpt_part_info.size = info->size; -- 2.11.0

4 5

[U-Boot] Please pull u-boot-cfi-flash/master
by Stefan Roese 27 Sep '17

27 Sep '17

Hi Tom, please pull the following 2 patches from Marek for the CFI driver. Thanks, Stefan The following changes since commit 1f6049e2501b5c35c61435dbc05ba96743202674: tools/mkimage: Make the path to the dtc binary that mkimage calls configurable (2017-09-24 07:33:03 -0400) are available in the git repository at: git://www.denx.de/git/u-boot-cfi-flash.git for you to fetch changes up to 72443c7f7d2174903e73ee88dcb4364e0387bbb2: mtd: cfi: Add support for status register polling (2017-09-26 10:57:53 +0200) ---------------------------------------------------------------- Marek Vasut (2): mtd: cfi: Zap cfi_flash_base in DM case mtd: cfi: Add support for status register polling drivers/mtd/cfi_flash.c | 25 +++++++++++++++++++------ include/flash.h | 5 +++++ include/mtd/cfi_flash.h | 1 + 3 files changed, 25 insertions(+), 6 deletions(-)

2 1

[U-Boot] Please pull u-boot-marvell/master
by Stefan Roese 27 Sep '17

27 Sep '17

Hi Tom, please pull the following MVEBU related patches. Thanks, Stefan The following changes since commit 1f6049e2501b5c35c61435dbc05ba96743202674: tools/mkimage: Make the path to the dtc binary that mkimage calls configurable (2017-09-24 07:33:03 -0400) are available in the git repository at: git://www.denx.de/git/u-boot-marvell.git for you to fetch changes up to 0d106f1e731a4ea47eaeb4b70cc8b4fcc13a3e40: arm: mvebu: clearfog: document boot from UART (2017-09-26 06:53:26 +0200) ---------------------------------------------------------------- Baruch Siach (2): arm: mvebu: fix boot from UART on ClearFog Base arm: mvebu: clearfog: document boot from UART Chris Packham (4): ARM: mvebu: Convert CONFIG_MVNETA to Kconfig ARM: mvebu: Add SoC IDs for Marvell's integrated CPUs ARM: mvebu: add SAR frequency values for 1.8/2.0GHz ARM: mvebu: handle unused DRAM banks with ECC enabled Joshua Scott (1): ARM: mvebu: add additional information to board_add_ram_info() Stefan Roese (1): arm: mvebu: Remove theadorable_defconfig arch/arm/mach-mvebu/cpu.c | 30 +++++++++++++---- arch/arm/mach-mvebu/dram.c | 51 +++++++++++++++++++++++++++-- arch/arm/mach-mvebu/include/mach/config.h | 3 -- arch/arm/mach-mvebu/include/mach/cpu.h | 1 + arch/arm/mach-mvebu/include/mach/soc.h | 4 +++ arch/arm/mach-mvebu/spl.c | 3 ++ board/solidrun/clearfog/README | 20 ++++++++++++ board/theadorable/MAINTAINERS | 1 - configs/clearfog_defconfig | 2 +- configs/controlcenterdc_defconfig | 2 +- configs/db-88f6820-amc_defconfig | 2 +- configs/db-88f6820-gp_defconfig | 2 +- configs/db-mv784mp-gp_defconfig | 2 +- configs/ds414_defconfig | 2 +- configs/maxbcm_defconfig | 2 +- configs/theadorable_debug_defconfig | 2 +- configs/theadorable_defconfig | 54 ------------------------------- configs/turris_omnia_defconfig | 2 +- drivers/net/Kconfig | 8 +++++ include/configs/mvebu_armada-37xx.h | 1 - scripts/config_whitelist.txt | 1 - 21 files changed, 116 insertions(+), 79 deletions(-) delete mode 100644 configs/theadorable_defconfig

2 1

[U-Boot] Issues with mx6 (cubox/wandboard) with 2017.09
by Peter Robinson 26 Sep '17

26 Sep '17

Hi Fabio, I'm seeing some issues with some of the i.MX6 devices with the latest stable release. It loads the SPL and then just seems to loop: U-Boot SPL 2017.09 (Sep 25 2017 - 18:42:10) Trying to boot from MMC1 U-Boot SPL 2017.09 (Sep 25 2017 - 18:42:10) Trying to boot from MMC1 U-Boot SPL 2017.09 (Sep 25 2017 - 18:42:10) Trying to boot from MMC1 This is built on Fedora with latest gcc7 so I'm not sure if that's a possible issue. Is this something people are aware of and I've missed the fix. Thanks, Peter

3 4

[U-Boot] [PATCH v2 00/14] log: Add a new logging feature
by Simon Glass 26 Sep '17

26 Sep '17

U-Boot currently has fairly rudimentary logging features. A basic printf() provides console output and debug() provides debug output which is activated if DEBUG is defined in the file containing the debug() statements. It would be useful to have a few more features: - control of debug output at runtime, so problems can potentially be debugged without recompiling U-Boot - control of which subsystems output debug information, so that (for example) it is possible to enable debugging for MMC or SATA at runtime - indication of severity with each message, so that the user can control whether just errors are displayed, warnings, or all debug messages - sending logging information to different destinations, such as console, memory, linux, etc, At present U-Boot has a logbuffer feature which records output in a memory buffer for later display or storage. This is useful but is not at present enabled for any board. This series introduced a new logging system which supports: - various log levels from panic to debug - log categories including all uclasses and a few others - log drivers to which all log records can be sent - log filters which control which log records make it to which drivers Enabling logging with the default options does not add much to code size. By default the maximum recorded log level is LOGL_INFO, meaning that debug messages (and above) are discarded a build-time. Increasing this level provides more run-time flexibility to enable/disable logging at the cost of increased code size. This feature is by no means finished. The README provides a long list of features and clean-ups that could be done. But hopefully this is a starting point for improving this important area in U-Boot. The series is available at u-boot-dm/log-working Changes in v2: - Add a comment as to why CONFIG_LOG_MAX_LEVEL is not defined - Change log levels to match new header - Change sandbox log level to 6 - Drop MAINTAINERS entries for files not added by this patch - Drop the special log() functions from the README - Drop the use of 'continue' in the macro - Fix LOG_SPL_MAX_LEVEL typo (should be SPL_LOG_MAX_LEVEL) - Fix function called when test command is selected - Fix help output for 'log test' - Fix up bad use of #if CONFIG_VAL() - use #ifdef instead - Line up log levels with Linux - Only execute log tests if CONFIG_LOG is enabled - Rename LOGL_WARN to LOGL_WARNING - Split pre-console address change into a separate patch - Update commit message to explain that this is not just for serial output Simon Glass (14): Revert "sandbox: remove os_putc() and os_puts()" sandbox: Adjust pre-console address to avoid conflict Revert "sandbox: Drop special case console code for sandbox" Move debug and logging support to a separate header mtdparts: Correct use of debug() Drop the log buffer log: Add an implemention of logging log: Add a console driver log: Add a 'log level' command log: Add a test command log: Plumb logging into the init sequence log: sandbox: Enable logging log: test: Add a pytest for logging log: Add documentation MAINTAINERS | 9 ++ arch/sandbox/cpu/os.c | 11 ++ cmd/Kconfig | 8 + cmd/Makefile | 2 +- cmd/log.c | 326 +++++--------------------------------- cmd/mtdparts.c | 3 - common/Kconfig | 86 ++++++++++ common/Makefile | 2 + common/board_f.c | 23 +-- common/board_r.c | 27 +--- common/console.c | 7 + common/image.c | 9 -- common/log.c | 245 ++++++++++++++++++++++++++++ common/log_console.c | 23 +++ common/stdio.c | 6 - configs/sandbox_defconfig | 5 +- doc/README.log | 214 +++++++++++++++++++++++++ include/asm-generic/global_data.h | 8 +- include/common.h | 64 +------- include/log.h | 316 ++++++++++++++++++++++++++++++++++++ include/logbuff.h | 49 ------ include/os.h | 20 +++ include/post.h | 4 +- post/post.c | 9 -- post/tests.c | 4 - scripts/config_whitelist.txt | 1 - test/Makefile | 1 + test/log/Makefile | 7 + test/log/log_test.c | 204 ++++++++++++++++++++++++ test/py/tests/test_log.py | 107 +++++++++++++ 30 files changed, 1320 insertions(+), 480 deletions(-) create mode 100644 common/log.c create mode 100644 common/log_console.c create mode 100644 doc/README.log create mode 100644 include/log.h delete mode 100644 include/logbuff.h create mode 100644 test/log/Makefile create mode 100644 test/log/log_test.c create mode 100644 test/py/tests/test_log.py -- 2.14.1.992.g2c7b836f3a-goog

1 14

[U-Boot] [PATCH] ARM: rmobile: Move CONFIG_CMD_ from rcar-gen3-common to configs
by Marek Vasut 26 Sep '17

26 Sep '17

Just move those config options from macros to configs. Signed-off-by: Marek Vasut <marek.vasut+renesas(a)gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu(a)nigauri.org> --- configs/r8a7795_salvator-x_defconfig | 4 ++++ configs/r8a7795_ulcb_defconfig | 5 +++++ configs/r8a7796_salvator-x_defconfig | 4 ++++ configs/r8a7796_ulcb_defconfig | 5 +++++ include/configs/rcar-gen3-common.h | 4 ---- 5 files changed, 18 insertions(+), 4 deletions(-) diff --git a/configs/r8a7795_salvator-x_defconfig b/configs/r8a7795_salvator-x_defconfig index 585eb64973..c5f86464d6 100644 --- a/configs/r8a7795_salvator-x_defconfig +++ b/configs/r8a7795_salvator-x_defconfig @@ -19,7 +19,11 @@ CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y +CONFIG_CMD_EXT2=y +CONFIG_CMD_EXT4=y +CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y +CONFIG_CMD_FS_GENERIC=y CONFIG_OF_CONTROL=y CONFIG_ENV_IS_IN_MMC=y CONFIG_CLK=y diff --git a/configs/r8a7795_ulcb_defconfig b/configs/r8a7795_ulcb_defconfig index 6f30c8d870..63fdb8d697 100644 --- a/configs/r8a7795_ulcb_defconfig +++ b/configs/r8a7795_ulcb_defconfig @@ -18,6 +18,11 @@ CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y +CONFIG_CMD_EXT2=y +CONFIG_CMD_EXT4=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_CMD_FAT=y +CONFIG_CMD_FS_GENERIC=y CONFIG_OF_CONTROL=y CONFIG_ENV_IS_IN_MMC=y CONFIG_CLK=y diff --git a/configs/r8a7796_salvator-x_defconfig b/configs/r8a7796_salvator-x_defconfig index 302e8999a6..4273f4186f 100644 --- a/configs/r8a7796_salvator-x_defconfig +++ b/configs/r8a7796_salvator-x_defconfig @@ -20,7 +20,11 @@ CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y +CONFIG_CMD_EXT2=y +CONFIG_CMD_EXT4=y +CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y +CONFIG_CMD_FS_GENERIC=y CONFIG_OF_CONTROL=y CONFIG_ENV_IS_IN_MMC=y CONFIG_CLK=y diff --git a/configs/r8a7796_ulcb_defconfig b/configs/r8a7796_ulcb_defconfig index 2ff91dfbf3..77a5018dc7 100644 --- a/configs/r8a7796_ulcb_defconfig +++ b/configs/r8a7796_ulcb_defconfig @@ -19,6 +19,11 @@ CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y +CONFIG_CMD_EXT2=y +CONFIG_CMD_EXT4=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_CMD_FAT=y +CONFIG_CMD_FS_GENERIC=y CONFIG_OF_CONTROL=y CONFIG_ENV_IS_IN_MMC=y CONFIG_CLK=y diff --git a/include/configs/rcar-gen3-common.h b/include/configs/rcar-gen3-common.h index 49b1b5ade4..745291a971 100644 --- a/include/configs/rcar-gen3-common.h +++ b/include/configs/rcar-gen3-common.h @@ -12,10 +12,6 @@ #include <asm/arch/rmobile.h> -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_EXT4 -#define CONFIG_CMD_EXT4_WRITE - #define CONFIG_REMAKE_ELF /* boot option */ -- 2.11.0

1 0

[U-Boot] [PATCH 1/6] ARM: rmobile: dts: Add EHCI USB nodes to r8a7796
by Marek Vasut 26 Sep '17

26 Sep '17

The R8A7796 EHCI USB nodes are missing from r8a7796 dtsi, add them. These nodes don't come from mainline Linux, yet the DT binding is similar enough to R8A7795 which already has those in mainline and once the nodes hit mainline, this DT should be resynched. Signed-off-by: Marek Vasut <marek.vasut+renesas(a)gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu(a)nigauri.org> --- arch/arm/dts/r8a7796.dtsi | 51 ++++++++++++++++++++++++++++++++++++++++++----- 1 file changed, 46 insertions(+), 5 deletions(-) diff --git a/arch/arm/dts/r8a7796.dtsi b/arch/arm/dts/r8a7796.dtsi index c0cb4a952f..7e3b1d82a1 100644 --- a/arch/arm/dts/r8a7796.dtsi +++ b/arch/arm/dts/r8a7796.dtsi @@ -1106,7 +1106,17 @@ }; hsusb: usb@e6590000 { - /* placeholder */ + compatible = "renesas,usbhs-r8a7796", + "renesas,rcar-gen3-usbhs"; + reg = <0 0xe6590000 0 0x100>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 704>; + renesas,buswait = <11>; + phys = <&usb2_phy0>; + phy-names = "usb"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 704>; + status = "disabled"; }; xhci0: usb@ee000000 { @@ -1118,11 +1128,27 @@ }; ehci0: usb@ee080100 { - /* placeholder */ + compatible = "generic-ehci"; + reg = <0 0xee080100 0 0x100>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>; + phys = <&usb2_phy0>; + phy-names = "usb"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 703>; + status = "disabled"; }; usb2_phy0: usb-phy@ee080200 { - /* placeholder */ + compatible = "renesas,usb2-phy-r8a7796", + "renesas,rcar-gen3-usb2-phy"; + reg = <0 0xee080200 0 0x700>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 703>; + #phy-cells = <0>; + status = "disabled"; }; ohci1: usb@ee0a0000 { @@ -1130,11 +1156,26 @@ }; ehci1: usb@ee0a0100 { - /* placeholder */ + compatible = "generic-ehci"; + reg = <0 0xee0a0100 0 0x100>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 702>; + phys = <&usb2_phy1>; + phy-names = "usb"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 702>; + status = "disabled"; }; usb2_phy1: usb-phy@ee0a0200 { - /* placeholder */ + compatible = "renesas,usb2-phy-r8a7796", + "renesas,rcar-gen3-usb2-phy"; + reg = <0 0xee0a0200 0 0x700>; + clocks = <&cpg CPG_MOD 702>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 702>; + #phy-cells = <0>; + status = "disabled"; }; sdhi0: sd@ee100000 { -- 2.11.0

1 5

[U-Boot] [PATCH] ARM: rmobile: Switch to UniPhier SD driver on Gen3
by Marek Vasut 26 Sep '17

26 Sep '17

The UniPhier SD driver handles the same Matsushita IP as is used in the Renesas RCar SoCs, yet the driver is significantly better than the SH SDHI one. Switch over to the Uniphier driver. Signed-off-by: Marek Vasut <marek.vasut+renesas(a)gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu(a)nigauri.org> --- configs/r8a7795_salvator-x_defconfig | 2 +- configs/r8a7795_ulcb_defconfig | 2 +- configs/r8a7796_salvator-x_defconfig | 2 +- configs/r8a7796_ulcb_defconfig | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) diff --git a/configs/r8a7795_salvator-x_defconfig b/configs/r8a7795_salvator-x_defconfig index 62b16b7a1c..271b15da42 100644 --- a/configs/r8a7795_salvator-x_defconfig +++ b/configs/r8a7795_salvator-x_defconfig @@ -25,7 +25,7 @@ CONFIG_ENV_IS_IN_MMC=y CONFIG_CLK=y CONFIG_CLK_RENESAS=y CONFIG_DM_MMC=y -CONFIG_SH_SDHI=y +CONFIG_MMC_UNIPHIER=y CONFIG_PHY_MICREL=y CONFIG_PHY_MICREL_KSZ90X1=y CONFIG_DM_ETH=y diff --git a/configs/r8a7795_ulcb_defconfig b/configs/r8a7795_ulcb_defconfig index a3dba70305..832998083a 100644 --- a/configs/r8a7795_ulcb_defconfig +++ b/configs/r8a7795_ulcb_defconfig @@ -23,7 +23,7 @@ CONFIG_ENV_IS_IN_MMC=y CONFIG_CLK=y CONFIG_CLK_RENESAS=y CONFIG_DM_MMC=y -CONFIG_SH_SDHI=y +CONFIG_MMC_UNIPHIER=y CONFIG_DM_ETH=y CONFIG_RENESAS_RAVB=y CONFIG_SCIF_CONSOLE=y diff --git a/configs/r8a7796_salvator-x_defconfig b/configs/r8a7796_salvator-x_defconfig index aa231b65e0..921fdf77ff 100644 --- a/configs/r8a7796_salvator-x_defconfig +++ b/configs/r8a7796_salvator-x_defconfig @@ -26,7 +26,7 @@ CONFIG_ENV_IS_IN_MMC=y CONFIG_CLK=y CONFIG_CLK_RENESAS=y CONFIG_DM_MMC=y -CONFIG_SH_SDHI=y +CONFIG_MMC_UNIPHIER=y CONFIG_PHY_MICREL=y CONFIG_PHY_MICREL_KSZ90X1=y CONFIG_DM_ETH=y diff --git a/configs/r8a7796_ulcb_defconfig b/configs/r8a7796_ulcb_defconfig index f222a6833c..5846147348 100644 --- a/configs/r8a7796_ulcb_defconfig +++ b/configs/r8a7796_ulcb_defconfig @@ -24,7 +24,7 @@ CONFIG_ENV_IS_IN_MMC=y CONFIG_CLK=y CONFIG_CLK_RENESAS=y CONFIG_DM_MMC=y -CONFIG_SH_SDHI=y +CONFIG_MMC_UNIPHIER=y CONFIG_DM_ETH=y CONFIG_RENESAS_RAVB=y CONFIG_SCIF_CONSOLE=y -- 2.11.0

1 0

[U-Boot] [PATCH v2 0/9] Add STM32H7 SoC, Discovery and Evaluation board support
by patrice.chotard＠st.com 26 Sep '17

26 Sep '17

From: Patrice Chotard <patrice.chotard(a)st.com> This series adds support for STM32H7 SoCs series and its Discovery and Evaluation board For more detailed information please visit: www.st.com/en/microcontrollers/stm32h7-series.html v2:_ add stm32h743 Evaluation board support _ squash all DTS patches which did specific adpatation for U-boot _ reword the board description in patches 6 and 7 _ use separate file stm32h7-u-boot.dtsi for "u-boot,dm-pre-reloc" property _ get memory address and size from DT in board file _ rework clock driver for stm32h743: _ merge peripheral and kernel clocks arrays _ add voltage scaling support needed for evaluation board Christophe Kerello (1): dm: misc: add stm32 rcc driver Patrice Chotard (8): pinctrl: stm32: add stm32h743-pinctrl compatible serial: stm32x7: add STM32H7 support dm: clk: add clk driver support for stm32h7 SoCs dm: reset: add stm32 reset driver ARM: DTS: stm32: add stm32h743i-disco files ARM: DTS: stm32: add stm32h743i-eval files ARM: DTS: stm32: adapt stm32h7 dts files for U-boot board: Add stm32h7 SoC, discovery and evaluation boards support arch/arm/dts/Makefile | 2 + arch/arm/dts/stm32h7-u-boot.dtsi | 88 ++ arch/arm/dts/stm32h743-pinctrl.dtsi | 249 ++++ arch/arm/dts/stm32h743.dtsi | 129 ++ arch/arm/dts/stm32h743i-disco.dts | 100 ++ arch/arm/dts/stm32h743i-eval.dts | 100 ++ arch/arm/include/asm/arch-stm32h7/gpio.h | 126 ++ arch/arm/include/asm/arch-stm32h7/stm32.h | 21 + arch/arm/mach-stm32/Kconfig | 17 + arch/arm/mach-stm32/Makefile | 1 + arch/arm/mach-stm32/stm32h7/Kconfig | 12 + arch/arm/mach-stm32/stm32h7/Makefile | 8 + arch/arm/mach-stm32/stm32h7/soc.c | 59 + board/st/stm32h743-disco/Kconfig | 19 + board/st/stm32h743-disco/MAINTAINERS | 7 + board/st/stm32h743-disco/Makefile | 8 + board/st/stm32h743-disco/stm32h743-disco.c | 56 + board/st/stm32h743-eval/Kconfig | 19 + board/st/stm32h743-eval/MAINTAINERS | 6 + board/st/stm32h743-eval/Makefile | 8 + board/st/stm32h743-eval/stm32h743-eval.c | 56 + configs/stm32h743-disco_defconfig | 30 + configs/stm32h743-eval_defconfig | 30 + doc/device-tree-bindings/clock/st,stm32h7-rcc.txt | 152 ++ doc/device-tree-bindings/reset/st,stm32-rcc.txt | 6 + drivers/clk/Makefile | 1 + drivers/clk/clk_stm32h7.c | 802 ++++++++++ drivers/misc/Kconfig | 9 + drivers/misc/Makefile | 1 + drivers/misc/stm32_rcc.c | 45 + drivers/pinctrl/pinctrl_stm32.c | 1 + drivers/reset/Kconfig | 7 + drivers/reset/Makefile | 1 + drivers/reset/stm32-reset.c | 80 + drivers/serial/Kconfig | 7 +- drivers/serial/serial_stm32x7.c | 2 + include/configs/stm32h743-disco.h | 51 + include/configs/stm32h743-eval.h | 51 + include/dt-bindings/clock/stm32h7-clks.h | 167 +++ include/dt-bindings/memory/stm32-sdram.h | 7 + include/dt-bindings/mfd/stm32h7-rcc.h | 138 ++ include/dt-bindings/pinctrl/stm32h7-pinfunc.h | 1612 +++++++++++++++++++++ 42 files changed, 4288 insertions(+), 3 deletions(-) create mode 100644 arch/arm/dts/stm32h7-u-boot.dtsi create mode 100644 arch/arm/dts/stm32h743-pinctrl.dtsi create mode 100644 arch/arm/dts/stm32h743.dtsi create mode 100644 arch/arm/dts/stm32h743i-disco.dts create mode 100644 arch/arm/dts/stm32h743i-eval.dts create mode 100644 arch/arm/include/asm/arch-stm32h7/gpio.h create mode 100644 arch/arm/include/asm/arch-stm32h7/stm32.h create mode 100644 arch/arm/mach-stm32/stm32h7/Kconfig create mode 100644 arch/arm/mach-stm32/stm32h7/Makefile create mode 100644 arch/arm/mach-stm32/stm32h7/soc.c create mode 100644 board/st/stm32h743-disco/Kconfig create mode 100644 board/st/stm32h743-disco/MAINTAINERS create mode 100644 board/st/stm32h743-disco/Makefile create mode 100644 board/st/stm32h743-disco/stm32h743-disco.c create mode 100644 board/st/stm32h743-eval/Kconfig create mode 100644 board/st/stm32h743-eval/MAINTAINERS create mode 100644 board/st/stm32h743-eval/Makefile create mode 100644 board/st/stm32h743-eval/stm32h743-eval.c create mode 100644 configs/stm32h743-disco_defconfig create mode 100644 configs/stm32h743-eval_defconfig create mode 100644 doc/device-tree-bindings/clock/st,stm32h7-rcc.txt create mode 100644 doc/device-tree-bindings/reset/st,stm32-rcc.txt create mode 100644 drivers/clk/clk_stm32h7.c create mode 100644 drivers/misc/stm32_rcc.c create mode 100644 drivers/reset/stm32-reset.c create mode 100644 include/configs/stm32h743-disco.h create mode 100644 include/configs/stm32h743-eval.h create mode 100644 include/dt-bindings/clock/stm32h7-clks.h create mode 100644 include/dt-bindings/mfd/stm32h7-rcc.h create mode 100644 include/dt-bindings/pinctrl/stm32h7-pinfunc.h -- 1.9.1

6 35