April 2017 - U-Boot

[U-Boot] [PULL] u-boot-socfpga/master
by Marek Vasut 25 Apr '17

25 Apr '17

This was rotting in for too long, might as well push it upstream ... The following changes since commit 3c476d841daa491f87c8f07851038afbdf4d90a8: Merge git://git.denx.de/u-boot-fsl-qoriq (2017-04-18 11:36:06 -0400) are available in the git repository at: git://git.denx.de/u-boot-socfpga.git master for you to fetch changes up to 6bd041f00d5d80761852eae1ecb7879a27f3c289: arm: socfpga: add cyclone5 based de10-nano board (2017-04-25 12:46:44 +0200) ---------------------------------------------------------------- Dalon Westergreen (1): arm: socfpga: add cyclone5 based de10-nano board arch/arm/dts/Makefile | 1 + arch/arm/dts/socfpga_cyclone5_de10_nano.dts | 68 ++++++++++ arch/arm/mach-socfpga/Kconfig | 7 + board/terasic/de10-nano/MAINTAINERS | 5 + board/terasic/de10-nano/Makefile | 9 ++ board/terasic/de10-nano/qts/iocsr_config.h | 660 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ board/terasic/de10-nano/qts/pinmux_config.h | 219 +++++++++++++++++++++++++++++++ board/terasic/de10-nano/qts/pll_config.h | 85 ++++++++++++ board/terasic/de10-nano/qts/sdram_config.h | 344 ++++++++++++++++++++++++++++++++++++++++++++++++ board/terasic/de10-nano/socfpga.c | 6 + configs/socfpga_de10_nano_defconfig | 59 +++++++++ include/configs/socfpga_de10_nano.h | 33 +++++ 12 files changed, 1496 insertions(+) create mode 100644 arch/arm/dts/socfpga_cyclone5_de10_nano.dts create mode 100644 board/terasic/de10-nano/MAINTAINERS create mode 100644 board/terasic/de10-nano/Makefile create mode 100644 board/terasic/de10-nano/qts/iocsr_config.h create mode 100644 board/terasic/de10-nano/qts/pinmux_config.h create mode 100644 board/terasic/de10-nano/qts/pll_config.h create mode 100644 board/terasic/de10-nano/qts/sdram_config.h create mode 100644 board/terasic/de10-nano/socfpga.c create mode 100644 configs/socfpga_de10_nano_defconfig create mode 100644 include/configs/socfpga_de10_nano.h

2 1

Re: [U-Boot] [PATCH 1/5] i.MX6Q: icorem6: Add modeboot env via board_late_init
by Jagan Teki 25 Apr '17

25 Apr '17

Hi Stefano, On Mon, Apr 17, 2017 at 9:18 PM, Jagan Teki <jagannadh.teki(a)gmail.com> wrote: > On Wed, Apr 12, 2017 at 9:27 PM, Stefano Babic <sbabic(a)denx.de> wrote: >> On 07/04/2017 19:50, Jagan Teki wrote: >>> Hi Stefano, >>> >>> On Mon, Mar 27, 2017 at 11:32 PM, Jagan Teki <jagan(a)openedev.com> wrote: >>>> From: Jagan Teki <jagan(a)amarulasolutions.com> >>>> >>>> Add runtime, modeboot env which is setting mmcboot, or >>>> nandboot based on the bootdevice so-that conditional >>>> macros b/w MMC and NAND for CONFIG_BOOTCOMMAND should >>>> be avoided in config files. >>>> >>>> Cc: Matteo Lisi <matteo.lisi(a)engicam.com> >>>> Cc: Michael Trimarchi <michael(a)amarulasolutions.com> >>>> Cc: Stefano Babic <sbabic(a)denx.de> >>>> Signed-off-by: Jagan Teki <jagan(a)amarulasolutions.com> >>> >>> Can you take this series? >>> >> >> I could take, but I am just asking if you do not find another way to >> avoid code duplication. You have very similar boards, and code is simply >> duplicated. Let's see Pathch 1/5 and Patch 3/5: >> >> >> +int board_late_init(void) >> +{ >> + switch ((imx6_src_get_boot_mode() & IMX6_BMODE_MASK) >> >> + IMX6_BMODE_SHIFT) { >> + case IMX6_BMODE_SD: >> + case IMX6_BMODE_ESD: >> + setenv("modeboot", "mmcboot"); >> + break; >> + case IMX6_BMODE_NAND: >> + setenv("modeboot", "nandboot"); >> + break; >> + default: >> + setenv("modeboot", ""); >> + break; >> + } >> + >> + return 0; >> +} >> >> And patch 3/5: >> >> +int board_late_init(void) >> +{ >> + switch ((imx6_src_get_boot_mode() & IMX6_BMODE_MASK) >> >> + IMX6_BMODE_SHIFT) { >> + case IMX6_BMODE_SD: >> + case IMX6_BMODE_ESD: >> + setenv("modeboot", "mmcboot"); >> + break; >> + case IMX6_BMODE_NAND: >> + setenv("modeboot", "nandboot"); >> + break; >> + default: >> + setenv("modeboot", ""); >> + break; >> + } >> + >> + return 0; >> +} >> + >> >> >> Why do you not use the same factorization as for Freescale's boards ? A >> board/engicam/common could contain shared code, and you reuse it among >> boards. The same for the default environment: it is duplicated again. > > Yes, I understand completely. will factorized the code in coming MW. Any help? thanks! -- Jagan Teki Free Software Engineer | www.openedev.com U-Boot, Linux | Upstream Maintainer Hyderabad, India.

1 0

[U-Boot] [PATCH v1 0/2] DS1307 RTC update
by Chris Packham 25 Apr '17

25 Apr '17

The first patch is the addition of a KConfig option for the date command. I haven't updated any boards to use the new option due to the sheer number of boards that would affect. It's probably better if board maintainers switch if/when they're ready. The second patch is the change I really want to see. As it allows me to switch a board I'm working on over to the driver model. I've tried to replicate the non-DM version of the driver faithfully but I've only got access to a ds1340 device so I can't be sure that the mcp7941x specific code is correct. Chris Packham (2): cmd: add Kconfig option for 'date' command rtc: Add DM support to ds1307 cmd/Kconfig | 6 ++ drivers/rtc/Kconfig | 7 ++ drivers/rtc/ds1307.c | 196 ++++++++++++++++++++++++++++++++++++++++++++++----- 3 files changed, 190 insertions(+), 19 deletions(-) -- 2.10.1

3 4

[U-Boot] "syntax error" after erasing flash sector
by Ohad Peleg 25 Apr '17

25 Apr '17

hello, from the hush cli im trying to update the uboot within the uboot. but after erasing a flash sector (which is succeded) i get: "syntax error" for every coomand.. im not sure why, uboot supposed to run from ram at this point so why does it matter i erased the flash?

1 0

[U-Boot] pull request: u-boot-uniphier/master
by Masahiro Yamada 25 Apr '17

25 Apr '17

Hi Tom, Here is a small pull request for UniPhier SoCs. Please pull! - Add USB PHY settings - Use PSCI system reset when used with ARM Trusted Firmware - Improve boot log to show SCP status - Sync DT with Linux The following changes since commit 3c476d841daa491f87c8f07851038afbdf4d90a8: Merge git://git.denx.de/u-boot-fsl-qoriq (2017-04-18 11:36:06 -0400) are available in the git repository at: git://git.denx.de/u-boot-uniphier.git master for you to fetch changes up to 4e7f8de42642cd0036dc78bf0df293f105cb5267: ARM: dts: uniphier: sync Device Tree with Linux (2017-04-20 23:50:02 +0900) ---------------------------------------------------------------- Masahiro Yamada (4): ARM: uniphier: setup EHCI PHY paramters for LD11 ARM: uniphier: enable PSCI sysreset for uniphier_v8_defconfig ARM: uniphier: show STM (SCP) status on boot and pinmon command ARM: dts: uniphier: sync Device Tree with Linux arch/arm/dts/uniphier-ld11.dtsi | 59 ++++++++++++++++++++++----- arch/arm/dts/uniphier-ld20.dtsi | 77 +++++++++++++++++++++++++++--------- arch/arm/dts/uniphier-pro5.dtsi | 72 ++++++++++++++++++++++++--------- arch/arm/dts/uniphier-pxs2.dtsi | 56 +++++++++++++++++++++----- arch/arm/mach-uniphier/Makefile | 2 + arch/arm/mach-uniphier/board_late_init.c | 16 +++++--- arch/arm/mach-uniphier/boot-device/boot-device.c | 38 ++++++++++++++++-- arch/arm/mach-uniphier/clk/clk-ld11.c | 9 +++++ arch/arm/mach-uniphier/init.h | 2 + arch/arm/mach-uniphier/sg-regs.h | 1 + configs/uniphier_v8_defconfig | 3 ++ 11 files changed, 272 insertions(+), 63 deletions(-) -- Best Regards Masahiro Yamada

2 1

[U-Boot] Please pull u-boot-mips
by Daniel Schwierzeck 25 Apr '17

25 Apr '17

Hi Tom, please pull two bugfixes for qemu_mips, thanks. The following changes since commit f6c1df44b815a08585e7fd3805a1db51a5955d09: Prepare v2017.05-rc2 (2017-04-17 18:16:49 -0400) are available in the git repository at: git://git.denx.de/u-boot-mips.git master for you to fetch changes up to 1967228b028b5ddf0b0b41806e5bd10e49e836a6: mips: qemu-mips/64: Expand malloc pool for CONFIG_SYS_BOOTPARAMS_LEN (2017-04-21 13:54:47 +0200) ---------------------------------------------------------------- Kyle Edwards (2): mips: qemu-mips/64: Remove obsolete CONFIG_SYS_MONITOR_LEN from config mips: qemu-mips/64: Expand malloc pool for CONFIG_SYS_BOOTPARAMS_LEN include/configs/qemu-mips.h | 5 ++--- include/configs/qemu-mips64.h | 5 ++--- 2 files changed, 4 insertions(+), 6 deletions(-)

2 1

[U-Boot] sunxi: Build issue with Bananapi_M2_Ultra
by Jagan Teki 25 Apr '17

25 Apr '17

Hi, We're unable to build with buildman with gcc-4.9.x arm: + Bananapi_M2_Ultra +arm-unknown-linux-gnueabi-ld.bfd: u-boot-spl section `.rodata' will not fit in region `.sram' +arm-unknown-linux-gnueabi-ld.bfd: region `.sram' overflowed by 716 bytes +make[2]: *** [spl/u-boot-spl] Error 1 +make[1]: *** [spl/u-boot-spl] Error 2 Any inputs? thanks! -- Jagan Teki Free Software Engineer | www.openedev.com U-Boot, Linux | Upstream Maintainer Hyderabad, India.

3 3

[U-Boot] [PATCH 1/2][v4] board: freescale: ls2080ardb: Update QIXIS code
by Priyanka Jain 25 Apr '17

25 Apr '17

Update QIXIS related code to be executed only if CONFIG_FSL_QIXIS flag is enabled As per board documentation, default sysclk is 100MHz. In case QIXIS code is not enabled, update default sysclk value to 100MHz Signed-off-by: Priyanka Jain <priyanka.jain(a)nxp.com> --- Changes for v4: Added changes for default sysclk as 100MHz board/freescale/ls2080ardb/ls2080ardb.c | 21 +++++++++++++++++---- 1 files changed, 17 insertions(+), 4 deletions(-) diff --git a/board/freescale/ls2080ardb/ls2080ardb.c b/board/freescale/ls2080ardb/ls2080ardb.c index c2aa101..10e8ea4 100644 --- a/board/freescale/ls2080ardb/ls2080ardb.c +++ b/board/freescale/ls2080ardb/ls2080ardb.c @@ -23,8 +23,10 @@ #include <asm/arch/ppa.h> #include <fsl_sec.h> +#ifdef CONFIG_FSL_QIXIS #include "../common/qixis.h" #include "ls2080ardb_qixis.h" +#endif #include "../common/vid.h" #define PIN_MUX_SEL_SDHC 0x00 @@ -58,12 +60,15 @@ unsigned long long get_qixis_addr(void) int checkboard(void) { +#ifdef CONFIG_FSL_QIXIS u8 sw; +#endif char buf[15]; cpu_name(buf); printf("Board: %s-RDB, ", buf); +#ifdef CONFIG_FSL_QIXIS sw = QIXIS_READ(arch); printf("Board Arch: V%d, ", sw >> 4); printf("Board version: %c, boot from ", (sw & 0xf) + 'A'); @@ -79,7 +84,7 @@ int checkboard(void) printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH); printf("FPGA: v%d.%d\n", QIXIS_READ(scver), QIXIS_READ(tagdata)); - +#endif puts("SERDES1 Reference : "); printf("Clock1 = 156.25MHz "); printf("Clock2 = 156.25MHz"); @@ -93,6 +98,7 @@ int checkboard(void) unsigned long get_board_sys_clk(void) { +#ifdef CONFIG_FSL_QIXIS u8 sysclk_conf = QIXIS_READ(brdcfg[1]); switch (sysclk_conf & 0x0F) { @@ -111,7 +117,8 @@ unsigned long get_board_sys_clk(void) case QIXIS_SYSCLK_166: return 166666666; } - return 66666666; +#endif + return 100000000; } int select_i2c_ch_pca9547(u8 ch) @@ -134,6 +141,7 @@ int i2c_multiplexer_select_vid_channel(u8 channel) int config_board_mux(int ctrl_type) { +#ifdef CONFIG_FSL_QIXIS u8 reg5; reg5 = QIXIS_READ(brdcfg[5]); @@ -151,7 +159,7 @@ int config_board_mux(int ctrl_type) } QIXIS_WRITE(brdcfg[5], reg5); - +#endif return 0; } @@ -181,8 +189,9 @@ int board_init(void) #endif select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT); +#ifdef CONFIG_FSL_QIXIS QIXIS_WRITE(rst_ctl, QIXIS_RST_CTL_RESET_EN); - +#endif #ifdef CONFIG_FSL_LS_PPA ppa_init(); #endif @@ -319,6 +328,7 @@ int ft_board_setup(void *blob, bd_t *bd) void qixis_dump_switch(void) { +#ifdef CONFIG_FSL_QIXIS int i, nr_of_cfgsw; QIXIS_WRITE(cms[0], 0x00); @@ -329,6 +339,7 @@ void qixis_dump_switch(void) QIXIS_WRITE(cms[0], i); printf("SW%d = (0x%02x)\n", i, QIXIS_READ(cms[1])); } +#endif } /* @@ -339,6 +350,7 @@ void update_spd_address(unsigned int ctrl_num, unsigned int slot, unsigned int *addr) { +#ifdef CONFIG_FSL_QIXIS u8 sw; sw = QIXIS_READ(arch); @@ -348,4 +360,5 @@ void update_spd_address(unsigned int ctrl_num, else if (ctrl_num == 1 && slot == 1) *addr = SPD_EEPROM_ADDRESS3; } +#endif } -- 1.7.4.1

1 0

[U-Boot] orangepi_pc2: Build error
by Jagan Teki 25 Apr '17

25 Apr '17

Hi Andre, Can you check this error on master? COPY spl/u-boot-spl.bin MKSUNXI spl/sunxi-spl.bin ERROR: File too large! make[1]: *** [spl/sunxi-spl.bin] Error 1 make: *** [spl/u-boot-spl] Error 2 thanks! -- Jagan Teki Free Software Engineer | www.openedev.com U-Boot, Linux | Upstream Maintainer Hyderabad, India.

3 3

[U-Boot] [PATCH] sunxi: fix the default value of CONS_INDEX on non-A23/A33 SUN8I
by Icenowy Zheng 25 Apr '17

25 Apr '17

Only A23/A33 in SUN8I want a default value of CONS_INDEX of 5, for other chips the default value is 1 like other Allwinner SoCs. Fix this default value. The original wrong value has lead to wrong console on H3 Orange Pi boards. Fixes: 7095f8641863 ("sunxi: Convert CONS_INDEX to Kconfig") Signed-off-by: Icenowy Zheng <icenowy(a)aosc.io> --- drivers/serial/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index a753367ee1..58320666b7 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -48,11 +48,11 @@ config CONS_INDEX int "UART used for console" depends on ARCH_SUNXI default 2 if MACH_SUN5I - default 5 if MACH_SUN8I + default 5 if MACH_SUN8I_A23 || MACH_SUN8I_A33 default 1 help Configures the console index. - For Allwinner SoC., default values are 2 for SUN5I and 5 for SUN8I. + For Allwinner SoC., default values are 2 for SUN5I and 5 for A23/A33. Otherwise, the index equals 1. config DM_SERIAL -- 2.12.2

2 1