December 2016 - U-Boot

[U-Boot] [PATCH v2 0/6] arm64: mvebu: Armada-8K family patches
by kostap＠marvell.com 06 Dec '16

06 Dec '16

From: Konstantin Porotchkin <kostap(a)marvell.com> This set of patches is adding more features for bards based on new Marvell MoChi platforms - Armada-70x0 and Armada-80x0. The patches were applied on top of Stefan's mvebu-related patch set v2 with the last patch named "dm: core: Add dev_get_addr_size_index() to retrieve addr and size". The test was done on Armada-70x0 and Armada-80x0 development boards equipped with SoC release A1. Since the SPI and I2C channels mapping between A0 and A1 releases were changed, the execution of added features on A0 boards will fail. Currently 2 major features were added: - BUBT command support - Pin controller driver for A8K family Changes for v2: - 7040-db: remove i2c0 and spi0 entries from AP (MPPs are reserved for SDIO) - Add "bubt" documentation - Fix code syntax - Fix the pin controller driver code following Simon's review - Added MPP functions documentation for CP110 and APN806 - Remove Gerrit Change ID from all patches - Fix wrong pin function values in A8K DTS files - Add missing cpm_i2c0 node to armada-7040-db.dts Konstantin Porotchkin (6): arm64: mvebu: Modify the A8K SPI and I2C config in DTS arm64: mvebu: Add bubt command for flash image burn arm64: mvebu: pinctrl: Add pin control driver for A8K family arm64: mvebu: Add pin control nodes to A8K family DTS files arm64: mvebu: Enable BUBT command support in A8K default config arm64: mvebu: Enable pin control support in A8K default config arch/arm/dts/armada-7040-db.dts | 64 +- arch/arm/dts/armada-8040-db.dts | 114 +++- arch/arm/dts/armada-ap806.dtsi | 18 + arch/arm/dts/armada-cp110-master.dtsi | 32 + arch/arm/dts/armada-cp110-slave.dtsi | 19 + arch/arm/include/asm/arch-armada8k/soc-info.h | 17 + arch/arm/mach-mvebu/Kconfig | 34 + cmd/Kconfig | 3 + cmd/Makefile | 2 + cmd/mvebu/Kconfig | 10 + cmd/mvebu/Makefile | 8 + cmd/mvebu/bubt.c | 726 +++++++++++++++++++++ configs/mvebu_db-88f7040_defconfig | 2 + configs/mvebu_db-88f8040_defconfig | 2 + .../pinctrl/marvell,armada-apn806-pinctrl.txt | 25 + .../pinctrl/marvell,armada-cp110-pinctrl.txt | 270 ++++++++ .../pinctrl/marvell,mvebu-pinctrl.txt | 113 ++++ doc/mvebu/cmd/bubt.txt | 64 ++ drivers/pinctrl/Kconfig | 1 + drivers/pinctrl/Makefile | 1 + drivers/pinctrl/mvebu/Kconfig | 7 + drivers/pinctrl/mvebu/Makefile | 7 + drivers/pinctrl/mvebu/pinctrl-mvebu.c | 179 +++++ drivers/pinctrl/mvebu/pinctrl-mvebu.h | 31 + 24 files changed, 1685 insertions(+), 64 deletions(-) create mode 100644 arch/arm/include/asm/arch-armada8k/soc-info.h create mode 100644 cmd/mvebu/Kconfig create mode 100644 cmd/mvebu/Makefile create mode 100644 cmd/mvebu/bubt.c create mode 100644 doc/device-tree-bindings/pinctrl/marvell,armada-apn806-pinctrl.txt create mode 100644 doc/device-tree-bindings/pinctrl/marvell,armada-cp110-pinctrl.txt create mode 100644 doc/device-tree-bindings/pinctrl/marvell,mvebu-pinctrl.txt create mode 100644 doc/mvebu/cmd/bubt.txt create mode 100644 drivers/pinctrl/mvebu/Kconfig create mode 100644 drivers/pinctrl/mvebu/Makefile create mode 100644 drivers/pinctrl/mvebu/pinctrl-mvebu.c create mode 100644 drivers/pinctrl/mvebu/pinctrl-mvebu.h -- 2.7.4

4 15

[U-Boot] [ANN] U-Boot v2017.01-rc1 released
by Tom Rini 06 Dec '16

06 Dec '16

Hey all, It's release day and v2017.01-rc1 is out and the merge window is closed. I've updated git and the tarballs are also up now. I plan on doing -rc2 on the 19th. My queue is, I think, looking good but I'll take another good hard look at things soon. Thanks all! -- Tom

1 0

[U-Boot] Please pull u-boot-fsl-qoriq master
by york sun 06 Dec '16

06 Dec '16

Tom, The following changes since commit 5102af4d2f53ec8d76ce60d103c65ae062b9c8fe: sata: sata_mv: Fix misaligned cache warnings (2016-12-05 13:53:42 +0100) are available in the git repository at: git://git.denx.de/u-boot-fsl-qoriq.git for you to fetch changes up to dd2ad2f1318975da1cf64cf95a4a3b3ed44172a5: armv8: QSPI: Add AHB bus 16MB+ size support (2016-12-05 08:32:43 -0800) ---------------------------------------------------------------- Priyanka Jain (1): armv8: ls2080a: Add serdes1 protocol 0x3b support Shengzhou Liu (2): fsl/ddr: Fix compiling warning fsl/ddr: Add erratum_a009942_check_cpo and clean related erratum Yuan Yao (2): ls1021a: QSPI: update the node for QSPI support armv8: QSPI: Add AHB bus 16MB+ size support jerry.huang(a)nxp.com (1): fsl/usb: enable the errata-a005697 for ls1012a arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 7 ++ arch/arm/cpu/armv8/fsl-layerscape/cpu.c | 7 +- arch/arm/cpu/armv8/fsl-layerscape/ls2080a_serdes.c | 1 + arch/arm/cpu/armv8/fsl-layerscape/soc.c | 42 +++++++ arch/arm/dts/ls1021a.dtsi | 1 + .../include/asm/arch-fsl-layerscape/immap_lsch2.h | 1 + .../include/asm/arch-fsl-layerscape/immap_lsch3.h | 1 + arch/powerpc/cpu/mpc85xx/cpu_init.c | 8 +- arch/powerpc/include/asm/config_mpc85xx.h | 2 - board/freescale/ls1021aqds/ls1021aqds.c | 6 +- configs/ls1012afrdm_qspi_defconfig | 1 + configs/ls1012aqds_qspi_defconfig | 1 + configs/ls1012ardb_qspi_defconfig | 1 + configs/ls1046ardb_qspi_defconfig | 1 + drivers/ddr/fsl/ctrl_regs.c | 136 ++++++++++++++++++++- drivers/ddr/fsl/fsl_ddr_gen4.c | 67 +++------- drivers/ddr/fsl/mpc85xx_ddr_gen3.c | 3 - drivers/usb/common/fsl-errata.c | 4 + include/fsl_ddr.h | 2 + include/fsl_ddr_sdram.h | 3 +- 20 files changed, 233 insertions(+), 62 deletions(-) Thanks. York

2 1

[U-Boot] Please pull from u-boot-i2c
by Heiko Schocher 06 Dec '16

06 Dec '16

Hello Tom, please pull from u-boot-i2c.git master The following changes since commit 194eded14ccb40af18e1a9fb8ab85903ee0803ef: Merge git://git.denx.de/u-boot-mpc85xx (2016-12-04 13:55:15 -0500) are available in the git repository at: git://git.denx.de/u-boot-i2c.git master for you to fetch changes up to 6ccb410124aef766f5c8ccf8a53a0adbe30d07b0: dm: Add timeline and guide for porting I2C drivers (2016-12-05 13:28:12 +0100) ---------------------------------------------------------------- Simon Glass (6): arm: exynos: i2c: Convert exynos boards to use DM_I2C arm: samsung: Convert s5p_goni and smdkc100 to DM_I2C samsung: i2c: Drop old code from I2C driver samsung: i2c: Split the high-speed I2C code into a new driver dm: i2c: Add a note to I2C drivers which need conversion dm: Add timeline and guide for porting I2C drivers arch/arm/Kconfig | 2 + board/samsung/common/misc.c | 4 + board/samsung/goni/goni.c | 7 +- board/samsung/trats/trats.c | 20 ++- board/samsung/trats2/trats2.c | 18 ++- board/samsung/universal_c210/universal.c | 22 ++- configs/origen_defconfig | 1 + doc/driver-model/i2c-howto.txt | 56 ++++++++ drivers/i2c/Makefile | 2 +- drivers/i2c/adi_i2c.c | 3 + drivers/i2c/davinci_i2c.c | 3 + drivers/i2c/exynos_hs_i2c.c | 561 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ drivers/i2c/fti2c010.c | 3 + drivers/i2c/ihs_i2c.c | 3 + drivers/i2c/kona_i2c.c | 3 + drivers/i2c/lpc32xx_i2c.c | 3 + drivers/i2c/pca9564_i2c.c | 3 + drivers/i2c/ppc4xx_i2c.c | 3 + drivers/i2c/rcar_i2c.c | 3 + drivers/i2c/s3c24x0_i2c.c | 1136 ++--------------------------------------------------------------------------------------------------------------------------------------------------- drivers/i2c/s3c24x0_i2c.h | 22 +++ drivers/i2c/sh_i2c.c | 3 + drivers/i2c/sh_sh7734_i2c.c | 3 + drivers/i2c/soft_i2c.c | 3 + drivers/i2c/tsi108_i2c.c | 3 + drivers/i2c/zynq_i2c.c | 3 + include/configs/s5p_goni.h | 19 --- include/configs/s5pc210_universal.h | 19 --- include/configs/trats.h | 30 ---- include/configs/trats2.h | 33 ----- 30 files changed, 752 insertions(+), 1242 deletions(-) create mode 100644 doc/driver-model/i2c-howto.txt create mode 100644 drivers/i2c/exynos_hs_i2c.c No errors detected on a travis build ... https://travis-ci.org/hsdenx/u-boot-i2c bye, Heiko -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

2 1

[U-Boot] [PATCH v2 0/7] imx6: icorem6: Add framebuffer and I2C support
by Jagan Teki 06 Dec '16

06 Dec '16

From: Jagan Teki <jagan(a)amarulasolutions.com> This series support framebuffer and I2C on top of u-boot-imx.git with latest u-boot.git merge. Changes for v2: - Rebase on u-boot-imx.git and u-boot.git Jagan Teki (7): video: Kconfig: Add VIDEO_IPV3 entry imx6: icorem6: Add framebuffer support imx6: icorem6: Add custom splashscreen support i2c: Kconfig: Add SYS_I2C_MXC entry i2c: mxc: Print hex instead of decimal for bus address i2c: mxc: Make 'no gpio pinctrl state' print as debug imx6: icorem6: Add I2C support arch/arm/cpu/armv7/mx6/Kconfig | 1 + board/engicam/icorem6/icorem6.c | 113 +++++++++++++++++++++++++++++++++++ configs/imx6qdl_icore_mmc_defconfig | 5 +- configs/imx6qdl_icore_nand_defconfig | 5 +- drivers/i2c/Kconfig | 8 +++ drivers/i2c/mxc_i2c.c | 2 +- drivers/video/Kconfig | 8 +++ include/configs/imx6qdl_icore.h | 14 +++++ tools/logos/engicam.bmp | Bin 0 -> 60214 bytes 9 files changed, 153 insertions(+), 3 deletions(-) create mode 100755 tools/logos/engicam.bmp -- 2.7.4

2 13

[U-Boot] check_config.sh produces false positive error?
by Mirza Krak 05 Dec '16

05 Dec '16

Hi. Recently a check was added to if new ad-hoc CONFIG options where added and produced an error. The exact commit is [1]. While building (2016.11) with some out of tree files in include folder I get the following error: Build error: | Error: You must add new CONFIG options using Kconfig | The following new ad-hoc CONFIG options were detected: | CONFIG_MENDER_H | | Please add these via Kconfig instead. Find a suitable Kconfig | file and add a 'config' or 'menuconfig' option. As you can see above that this is not a new configuration option but a header guard. Probably not the best naming convention here, but still I wonder if the check_config.sh script should produce errors in cases like the one above? The common practice in u-boot is to use _H as part of a header guard name (as far as I can see at least) so maybe that should be added to the regexp in check_config.sh? [1]. http://git.denx.de/?p=u-boot.git;a=commit;h=371244cb19f9804711dd66e4281ff79… Best Regards Mirza

2 2

[U-Boot] How to change partition sizes in Uboot
by Haris Papadopoulos 05 Dec '16

05 Dec '16

Hi, I use embedded yocto to build a real time linux environment on a board. The kernel rootfs and bootloader are stored on nand flash, on a different partition each. When I type in the bootloader mtdparts I observe the following: => mtdparts device nand0 <gpmi-nand>, # parts = 7 #: name size offset mask_flags 0: bootloader 0x00300000 0x00000000 0 1: environment 0x00100000 0x00300000 0 2: safe 0x00100000 0x00400000 0 3: linux 0x00e00000 0x00500000 0 4: recovery 0x00e00000 0x01300000 0 5: rootfs 0x08000000 0x02100000 0 6: update 0x05f00000 0x0a100000 0 active partition: nand0,0 - (bootloader) 0x00300000 @ 0x00000000 defaults: mtdids : nand0=gpmi-nand mtdparts: mtdparts=gpmi-nand:3m(bootloader),1m(environment),1m(safe),14m(linux),14m(recovery),128m(rootfs),-(update) I can modify this by typing setenv mtdparts 'mtdparts=gpmi-nand:3m(bootloader),1m(environment),1m(safe),14m(linux),14m(recovery),112m(rootfs),-(update)' How can I modify this by modifying the uboot code? Thanks -- Haris Papadopoulos| AmberBox | Software Engineer haris(a)amberbox.com <tomas(a)amberbox.com> | + 1 650-686-0230

1 0

[U-Boot] [PATCH v3] armv8: QSPI: Add AHB bus 16MB+ size support
by Yuan Yao 05 Dec '16

05 Dec '16

From: Yuan Yao <yao.yuan(a)nxp.com> The default configuration for QSPI AHB bus can't support 16MB+. But some flash on NXP layerscape board are more than 16MB. Signed-off-by: Yuan Yao <yao.yuan(a)nxp.com> --- Changed in v3: Rename the CONFIG_SYS_QSPI_ADDR to SYS_FSL_QSPI_ADDR. Changed in v2: Remove the CONFIG_QSPI_AHB_INIT into Kconfig. --- arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 7 ++++ arch/arm/cpu/armv8/fsl-layerscape/soc.c | 42 ++++++++++++++++++++++ .../include/asm/arch-fsl-layerscape/immap_lsch2.h | 1 + .../include/asm/arch-fsl-layerscape/immap_lsch3.h | 1 + configs/ls1012afrdm_qspi_defconfig | 1 + configs/ls1012aqds_qspi_defconfig | 1 + configs/ls1012ardb_qspi_defconfig | 1 + configs/ls1046ardb_qspi_defconfig | 1 + 9 files changed, 56 insertions(+) diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig index 94ec8d5..f078712 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig +++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig @@ -71,6 +71,13 @@ config NUM_DDR_CONTROLLERS default 3 if ARCH_LS2080A default 1 +config QSPI_AHB_INIT + bool "Init the QSPI AHB bus" + help + The default setting for QSPI AHB bus just support 3bytes addressing. + But some QSPI flash size up to 64MBytes, so initialize the QSPI AHB + bus for those flashes to support the full QSPI flash size. + config SYS_FSL_IFC_BANK_COUNT int "Maximum banks of Integrated flash controller" depends on ARCH_LS1043A || ARCH_LS1046A || ARCH_LS2080A diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c b/arch/arm/cpu/armv8/fsl-layerscape/soc.c index 6c42387..2f54625 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c @@ -373,6 +373,45 @@ void fsl_lsch2_early_init_f(void) } #endif +#ifdef CONFIG_QSPI_AHB_INIT +/* Enable 4bytes address support and fast read */ +int qspi_ahb_init(void) +{ + u32 *qspi_lut, lut_key, *qspi_key; + + qspi_key = (void *)SYS_FSL_QSPI_ADDR + 0x300; + qspi_lut = (void *)SYS_FSL_QSPI_ADDR + 0x310; + + lut_key = in_be32(qspi_key); + + if (lut_key == 0x5af05af0) { + /* That means the register is BE */ + out_be32(qspi_key, 0x5af05af0); + /* Unlock the lut table */ + out_be32(qspi_key + 1, 0x00000002); + out_be32(qspi_lut, 0x0820040c); + out_be32(qspi_lut + 1, 0x1c080c08); + out_be32(qspi_lut + 2, 0x00002400); + /* Lock the lut table */ + out_be32(qspi_key, 0x5af05af0); + out_be32(qspi_key + 1, 0x00000001); + } else { + /* That means the register is LE */ + out_le32(qspi_key, 0x5af05af0); + /* Unlock the lut table */ + out_le32(qspi_key + 1, 0x00000002); + out_le32(qspi_lut, 0x0820040c); + out_le32(qspi_lut + 1, 0x1c080c08); + out_le32(qspi_lut + 2, 0x00002400); + /* Lock the lut table */ + out_le32(qspi_key, 0x5af05af0); + out_le32(qspi_key + 1, 0x00000001); + } + + return 0; +} +#endif + #ifdef CONFIG_BOARD_LATE_INIT int board_late_init(void) { @@ -382,6 +421,9 @@ int board_late_init(void) #ifdef CONFIG_CHAIN_OF_TRUST fsl_setenv_chain_of_trust(); #endif +#ifdef CONFIG_QSPI_AHB_INIT + qspi_ahb_init(); +#endif return 0; } diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h index d88543d..ff0a88a 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h @@ -18,6 +18,7 @@ #define CONFIG_SYS_CCI400_ADDR (CONFIG_SYS_IMMR + 0x00180000) #define CONFIG_SYS_GIC400_ADDR (CONFIG_SYS_IMMR + 0x00400000) #define CONFIG_SYS_IFC_ADDR (CONFIG_SYS_IMMR + 0x00530000) +#define SYS_FSL_QSPI_ADDR (CONFIG_SYS_IMMR + 0x00550000) #define CONFIG_SYS_FSL_ESDHC_ADDR (CONFIG_SYS_IMMR + 0x00560000) #define CONFIG_SYS_FSL_CSU_ADDR (CONFIG_SYS_IMMR + 0x00510000) #define CONFIG_SYS_FSL_GUTS_ADDR (CONFIG_SYS_IMMR + 0x00ee0000) diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h index 2df56f7..e18dcbd 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h @@ -19,6 +19,7 @@ #define CONFIG_SYS_FSL_CH3_CLK_GRPA_ADDR (CONFIG_SYS_IMMR + 0x00300000) #define CONFIG_SYS_FSL_CH3_CLK_GRPB_ADDR (CONFIG_SYS_IMMR + 0x00310000) #define CONFIG_SYS_FSL_CH3_CLK_CTRL_ADDR (CONFIG_SYS_IMMR + 0x00370000) +#define SYS_FSL_QSPI_ADDR (CONFIG_SYS_IMMR + 0x010c0000) #define CONFIG_SYS_FSL_ESDHC_ADDR (CONFIG_SYS_IMMR + 0x01140000) #define CONFIG_SYS_IFC_ADDR (CONFIG_SYS_IMMR + 0x01240000) #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR + 0x011C0500) diff --git a/configs/ls1012afrdm_qspi_defconfig b/configs/ls1012afrdm_qspi_defconfig index 1f3d487..c83b2eb 100644 --- a/configs/ls1012afrdm_qspi_defconfig +++ b/configs/ls1012afrdm_qspi_defconfig @@ -34,3 +34,4 @@ CONFIG_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_USB_STORAGE=y +CONFIG_QSPI_AHB_INIT=y diff --git a/configs/ls1012aqds_qspi_defconfig b/configs/ls1012aqds_qspi_defconfig index c0514ae..27bccd1 100644 --- a/configs/ls1012aqds_qspi_defconfig +++ b/configs/ls1012aqds_qspi_defconfig @@ -38,3 +38,4 @@ CONFIG_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_USB_STORAGE=y +CONFIG_QSPI_AHB_INIT=y diff --git a/configs/ls1012ardb_qspi_defconfig b/configs/ls1012ardb_qspi_defconfig index 13c9f21..459682d 100644 --- a/configs/ls1012ardb_qspi_defconfig +++ b/configs/ls1012ardb_qspi_defconfig @@ -38,3 +38,4 @@ CONFIG_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_USB_STORAGE=y +CONFIG_QSPI_AHB_INIT=y diff --git a/configs/ls1046ardb_qspi_defconfig b/configs/ls1046ardb_qspi_defconfig index 8508c09..fa17373 100644 --- a/configs/ls1046ardb_qspi_defconfig +++ b/configs/ls1046ardb_qspi_defconfig @@ -24,3 +24,4 @@ CONFIG_SPI_FLASH=y CONFIG_SYS_NS16550=y CONFIG_DM_SPI=y CONFIG_FSL_QSPI=y +CONFIG_QSPI_AHB_INIT=y -- 2.1.0.27.g96db324

2 1

[U-Boot] [PATCH v2] fsl/usb: enable the errata-a005697 for ls1012a
by Changming Huang 05 Dec '16

05 Dec '16

Enable the errata-a005697 for ls1012a Signed-off-by: Changming Huang <jerry.huang(a)nxp.com> --- changes in v2: - change the macro to ARM64 drivers/usb/common/fsl-errata.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/usb/common/fsl-errata.c b/drivers/usb/common/fsl-errata.c index 0dc3dd8..6069c93 100644 --- a/drivers/usb/common/fsl-errata.c +++ b/drivers/usb/common/fsl-errata.c @@ -139,6 +139,10 @@ bool has_erratum_a005697(void) case SVR_9132: return IS_SVR_REV(svr, 1, 0) || IS_SVR_REV(svr, 1, 1); #endif +#ifdef ONFIG_ARM64 + case SVR_LS1012A: + return IS_SVR_REV(svr, 1, 0); +#endif } return false; } -- 1.7.9.5

2 1

[U-Boot] [PATCH v2] ls1021a: QSPI: update the node for QSPI support
by Yuan Yao 05 Dec '16

05 Dec '16

From: Yuan Yao <yao.yuan(a)nxp.com> Add the name for register space and memory space. <0x1550000 0x10000 > is the QSPI register space. <0x40000000 0x4000000> is the QSPI memory space. Signed-off-by: Yuan Yao <yao.yuan(a)nxp.com> --- Changed in v2: Updated the commit message. --- arch/arm/dts/ls1021a.dtsi | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/dts/ls1021a.dtsi b/arch/arm/dts/ls1021a.dtsi index 119b1af..37be169 100644 --- a/arch/arm/dts/ls1021a.dtsi +++ b/arch/arm/dts/ls1021a.dtsi @@ -176,6 +176,7 @@ #size-cells = <0>; reg = <0x1550000 0x10000>, <0x40000000 0x4000000>; + reg-names = "QuadSPI", "QuadSPI-memory"; num-cs = <2>; big-endian; status = "disabled"; -- 2.1.0.27.g96db324

2 1