December 2016 - U-Boot

[U-Boot] [PATCH v2 0/4] dm: Update on serial driver progress
by Simon Glass 05 Dec '16

05 Dec '16

Only two serial drivers remain to be converted. This series drops one of those, since the boards appear to be unmaintained. Thank you to Marcel Ziswiler for converting the pxa serial driver. With this, only blackfin remains. The blackfin driver probably needs to be converted as there is recent activity with these boards. I am copying the maintainer so that this work can be completed. Changes in v2: - Drop the pxa patches since it is now converted Simon Glass (4): serial: Update docs to indicate mcfuart supports DM_SERIAL arm: Remove smdk2410 board arm: Remove VCMA9 board serial: Drop the s3c24x0 serial driver arch/arm/Kconfig | 10 - board/mpl/common/common_util.c | 23 -- board/mpl/vcma9/Kconfig | 15 - board/mpl/vcma9/MAINTAINERS | 6 - board/mpl/vcma9/Makefile | 11 - board/mpl/vcma9/cmd_vcma9.c | 119 -------- board/mpl/vcma9/lowlevel_init.S | 500 --------------------------------- board/mpl/vcma9/vcma9.c | 209 -------------- board/mpl/vcma9/vcma9.h | 28 -- board/samsung/smdk2410/Kconfig | 15 - board/samsung/smdk2410/MAINTAINERS | 6 - board/samsung/smdk2410/Makefile | 9 - board/samsung/smdk2410/lowlevel_init.S | 146 ---------- board/samsung/smdk2410/smdk2410.c | 139 --------- configs/VCMA9_defconfig | 17 -- configs/smdk2410_defconfig | 18 -- doc/driver-model/serial-howto.txt | 2 - drivers/serial/Makefile | 1 - drivers/serial/serial_s3c24x0.c | 208 -------------- include/configs/VCMA9.h | 205 -------------- include/configs/smdk2410.h | 180 ------------ scripts/config_whitelist.txt | 4 - 22 files changed, 1871 deletions(-) delete mode 100644 board/mpl/vcma9/Kconfig delete mode 100644 board/mpl/vcma9/MAINTAINERS delete mode 100644 board/mpl/vcma9/Makefile delete mode 100644 board/mpl/vcma9/cmd_vcma9.c delete mode 100644 board/mpl/vcma9/lowlevel_init.S delete mode 100644 board/mpl/vcma9/vcma9.c delete mode 100644 board/mpl/vcma9/vcma9.h delete mode 100644 board/samsung/smdk2410/Kconfig delete mode 100644 board/samsung/smdk2410/MAINTAINERS delete mode 100644 board/samsung/smdk2410/Makefile delete mode 100644 board/samsung/smdk2410/lowlevel_init.S delete mode 100644 board/samsung/smdk2410/smdk2410.c delete mode 100644 configs/VCMA9_defconfig delete mode 100644 configs/smdk2410_defconfig delete mode 100644 drivers/serial/serial_s3c24x0.c delete mode 100644 include/configs/VCMA9.h delete mode 100644 include/configs/smdk2410.h -- 2.8.0.rc3.226.g39d4020

4 17

[U-Boot] [PATCH] post: cosmetic: fix typo
by Tomas Melin 05 Dec '16

05 Dec '16

From: Niko Mauno <niko.mauno(a)vaisala.com> Change 'date' to 'data'. Signed-off-by: Tomas Melin <tomas.melin(a)vaisala.com> --- post/drivers/memory.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/post/drivers/memory.c b/post/drivers/memory.c index d512fa5..89725fa 100644 --- a/post/drivers/memory.c +++ b/post/drivers/memory.c @@ -234,7 +234,7 @@ static int memory_post_dataline(unsigned long long * pmem) hi = (temp64>>32) & 0xffffffff; lo = temp64 & 0xffffffff; - post_log("Memory (date line) error at %08x, " + post_log("Memory (data line) error at %08x, " "wrote %08x%08x, read %08x%08x !\n", pmem, pathi, patlo, hi, lo); ret = -1; -- 2.1.4

2 1

[U-Boot] [PATCH 00/11] ARM: ti: dra71: Add support for dra71-evm
by Lokesh Vutla 05 Dec '16

05 Dec '16

This series adds support for dra71-evm. This is dependent on the OPP kconfig support series posted recently[1]. Testing: dra71-evm: http://pastebin.ubuntu.com/23521081/ dra72-evm-revc: http://pastebin.ubuntu.com/23521117/ dra7-evm: http://pastebin.ubuntu.com/23521091/ [1] https://www.mail-archive.com/u-boot@lists.denx.de/msg231685.html Keerthy (2): board: ti: dra71x-evm: Add PMIC support configs: dra7xx: Enable lp873x options Lokesh Vutla (7): board: ti: dra71x-evm: Add epprom support board: ti: dra71x-evm: Add mux settings ARM: OMAP4+: Add support for getting pbias info from board ARM: dts: dra7xx: sync DT with latest Linux ARM: dts: dra71x-evm: Add DT support configs: dra7xx: hs: Enable DM_ETH configs: dra7xx: Enable pmic/regulator options Nishanth Menon (2): board: ti: dra72: Introduce optimization for rgmii timing for rev C configs: ti_omap5_common: Select dtb name for dra71x arch/arm/dts/Makefile | 2 +- arch/arm/dts/dra7-dspeve-thermal.dtsi | 27 ++ arch/arm/dts/dra7-evm.dts | 507 ++++++++++++++++------ arch/arm/dts/dra7-iva-thermal.dtsi | 27 ++ arch/arm/dts/dra7.dtsi | 717 ++++++++++++++++++++++++++------ arch/arm/dts/dra71-evm.dts | 230 ++++++++++ arch/arm/dts/dra72-evm-common.dtsi | 353 +++++++++------- arch/arm/dts/dra72-evm-revc.dts | 30 +- arch/arm/dts/dra72-evm-tps65917.dtsi | 134 ++++++ arch/arm/dts/dra72-evm.dts | 37 +- arch/arm/dts/dra7xx-clocks.dtsi | 425 ++++++++++--------- arch/arm/include/asm/arch-omap5/clock.h | 8 + arch/arm/include/asm/omap_common.h | 1 + arch/arm/include/asm/omap_mmc.h | 2 +- arch/arm/mach-omap2/omap4/hwinit.c | 13 + arch/arm/mach-omap2/omap5/hw_data.c | 16 + arch/arm/mach-omap2/omap5/hwinit.c | 34 ++ board/ti/dra7xx/evm.c | 69 ++- board/ti/dra7xx/mux_data.h | 275 ++++++++++-- configs/dra7xx_evm_defconfig | 6 +- configs/dra7xx_hs_evm_defconfig | 10 +- drivers/mmc/omap_hsmmc.c | 33 +- drivers/power/palmas.c | 21 +- include/configs/ti_omap5_common.h | 2 + include/dt-bindings/clk/ti-dra7-atl.h | 40 ++ include/dt-bindings/pinctrl/dra.h | 26 ++ include/palmas.h | 13 +- 27 files changed, 2354 insertions(+), 704 deletions(-) create mode 100644 arch/arm/dts/dra7-dspeve-thermal.dtsi create mode 100644 arch/arm/dts/dra7-iva-thermal.dtsi create mode 100644 arch/arm/dts/dra71-evm.dts create mode 100644 arch/arm/dts/dra72-evm-tps65917.dtsi create mode 100644 include/dt-bindings/clk/ti-dra7-atl.h -- 2.10.1

2 33

[U-Boot] [PATCH v2 0/3] ARM: DRA7: Add Kconfig support for selecting OPPs
by Lokesh Vutla 05 Dec '16

05 Dec '16

This series adds support for selecting DSPEVE, IVA, GPU OPPs via Kconfig and fixup DT clock nodes as required. Changes since v1: - Added help option for Kconfig entries. Lokesh Vutla (1): ARM: OMAP4+: Add support for dynamically selecting OPPs Suman Anna (2): ARM: DRA7: Redefine voltage and efuse macros per OPP using Kconfig ARM: DRA7: Fixup DSPEVE, IVA and GPU clock frequencies based on OPP arch/arm/include/asm/arch-omap5/clock.h | 47 ++++++++--- arch/arm/include/asm/omap_common.h | 23 +++++- arch/arm/mach-omap2/clocks-common.c | 116 ++++++++++++++++----------- arch/arm/mach-omap2/omap4/hw_data.c | 24 +++--- arch/arm/mach-omap2/omap5/Kconfig | 93 ++++++++++++++++++++++ arch/arm/mach-omap2/omap5/fdt.c | 136 ++++++++++++++++++++++++++++++++ arch/arm/mach-omap2/omap5/hw_data.c | 12 +-- board/ti/am57xx/board.c | 92 ++++++++++++++++----- board/ti/dra7xx/evm.c | 91 ++++++++++++++++----- 9 files changed, 517 insertions(+), 117 deletions(-) -- 2.10.1

2 9

[U-Boot] [U-BOOT][TEST PATCH 0/5] Cosmetic modifications api_storage.c
by Walt Feasel 05 Dec '16

05 Dec '16

Make various checkpatch style modifications for api_storage.c to include: Align parenthesis Blank line after { Line over 80 char Comment style Spelling correction Walt Feasel (5): Cosmetic api: api_storage.c Align parenthesis Cosmetic api: api_storage.c Blank line after { Cosmetic api: api_storage.c Line over 80 char Cosmetic api: api_storage.c Comment style Cosmetic api: api_storage.c Spelling correction api/api_storage.c | 42 +++++++++++++++++++++--------------------- 1 file changed, 21 insertions(+), 21 deletions(-) -- This patch series is to verify a correct patch submission. Please let me know if there is a problem or preferred wording for submitting cosmetic patches. 2.1.4

2 11

[U-Boot] [PATCH] defconfig: am43xx_evm: Enable DM_SPI and DM_SPI_FLASH
by Vignesh R 05 Dec '16

05 Dec '16

Commit 4c4e3b37750f3("ARM: AM43xx: Enable FIT") accidentally disabled DM_SPI and DM_SPI_FLASH. Add back DM_SPI and DM_SPI_FLASH to am43xx_evm_defconfig in order to make use of DM framework for QSPI. Signed-off-by: Vignesh R <vigneshr(a)ti.com> --- configs/am43xx_evm_defconfig | 2 ++ configs/am43xx_hs_evm_defconfig | 2 ++ 2 files changed, 4 insertions(+) diff --git a/configs/am43xx_evm_defconfig b/configs/am43xx_evm_defconfig index 443e1fb6bfc2..e596106e1326 100644 --- a/configs/am43xx_evm_defconfig +++ b/configs/am43xx_evm_defconfig @@ -51,6 +51,8 @@ CONFIG_SPI_FLASH_MACRONIX=y CONFIG_DM_ETH=y CONFIG_DM_SERIAL=y CONFIG_SYS_NS16550=y +CONFIG_DM_SPI=y +CONFIG_DM_SPI_FLASH=y CONFIG_TI_QSPI=y CONFIG_TIMER=y CONFIG_OMAP_TIMER=y diff --git a/configs/am43xx_hs_evm_defconfig b/configs/am43xx_hs_evm_defconfig index 1c538774b0a9..582866daa11c 100644 --- a/configs/am43xx_hs_evm_defconfig +++ b/configs/am43xx_hs_evm_defconfig @@ -52,6 +52,8 @@ CONFIG_SPI_FLASH_MACRONIX=y CONFIG_DM_ETH=y CONFIG_DM_SERIAL=y CONFIG_SYS_NS16550=y +CONFIG_DM_SPI=y +CONFIG_DM_SPI_FLASH=y CONFIG_TI_QSPI=y CONFIG_TIMER=y CONFIG_OMAP_TIMER=y -- 2.10.2

4 3

[U-Boot] [PATCH] common: image: Remove FIT header update from image post-processing
by Andrew F. Davis 05 Dec '16

05 Dec '16

After an image is selected out of a FIT blob for further processing we run an optional, platform specific, post-processing function on this component. This post-processing may modify the position and size of the image, so after post-processing we update the location and size for this image in the FIT header. This can cause problems as the position of subsequent components in the FIT blob are only referenced by relative position to the end of the last component. When we resize or move a component the following components position will be calculated incorrectly. To fix this, we do not update the FIT header but instead only update our local understanding of the image data. This also allows us to re-run post-processing steps if needed. Signed-off-by: Andrew F. Davis <afd(a)ti.com> Tested-by: Carlos Hernandez <ceh(a)ti.com> --- common/image-fit.c | 29 ++++++----------------------- 1 file changed, 6 insertions(+), 23 deletions(-) diff --git a/common/image-fit.c b/common/image-fit.c index 77dc011..23b9c54 100644 --- a/common/image-fit.c +++ b/common/image-fit.c @@ -1505,12 +1505,6 @@ void fit_conf_print(const void *fit, int noffset, const char *p) static int fit_image_select(const void *fit, int rd_noffset, int verify) { -#if !defined(USE_HOSTCC) && defined(CONFIG_FIT_IMAGE_POST_PROCESS) - const void *data; - size_t size; - int ret; -#endif - fit_image_print(fit, rd_noffset, " "); if (verify) { @@ -1522,23 +1516,6 @@ static int fit_image_select(const void *fit, int rd_noffset, int verify) puts("OK\n"); } -#if !defined(USE_HOSTCC) && defined(CONFIG_FIT_IMAGE_POST_PROCESS) - ret = fit_image_get_data(fit, rd_noffset, &data, &size); - if (ret) - return ret; - - /* perform any post-processing on the image data */ - board_fit_image_post_process((void **)&data, &size); - - /* - * update U-Boot's understanding of the "data" property start address - * and size according to the performed post-processing - */ - ret = fdt_setprop((void *)fit, rd_noffset, FIT_DATA_PROP, data, size); - if (ret) - return ret; -#endif - return 0; } @@ -1738,6 +1715,12 @@ int fit_image_load(bootm_headers_t *images, ulong addr, bootstage_error(bootstage_id + BOOTSTAGE_SUB_GET_DATA); return -ENOENT; } + +#if !defined(USE_HOSTCC) && defined(CONFIG_FIT_IMAGE_POST_PROCESS) + /* perform any post-processing on the image data */ + board_fit_image_post_process((void **)&buf, &size); +#endif + len = (ulong)size; /* verify that image data is a proper FDT blob */ -- 2.10.2

4 3

[U-Boot] [PATCH 00/12] Fix GCC 6.2 compiler warnings
by Andre Przywara 05 Dec '16

05 Dec '16

More or less by accident I ran buildman the other day on a box with GCC 6.2.0 cross-compilers. By default it seems that the 6.x series enables more (and new) warnings, so the results were non-clean builds for about two thirds of the armv8 defconfigs. Some of the warnings are cosmectic, but some are genuine bugs (mostly in error handling cases, but still). This is a first bunch of fixes, shamelessly picking the low hanging fruits here. I fixed even the cases where the code itself was correct, to avoid warnings and also not to confuse any readers of the code. Also getting used to ignore warnings leads to eventually missing that one genuine one in the future (been there ...) In a few cases I made a guess on the fix, please feel free to correct me in the (likely) case I got it wrong. Applies on top of v2016.11 release. Cheers, Andre. P.S. Almost every Freescale board build still complains along the lines of [1]. I spent some time in that file (drivers/ddr/fsl/options.c) and narrowly escaped before I lost the remaining bits of my sanity to the daemons of #ifdef hell. If someone more familiar with that code could take a look and decide whether those definitions either belong into some #ifdef clauses or they should be attributed with __maybe_unused. [1] http://pastebin.com/TrLSssqU Andre Przywara (12): ls2080aqds: eth: add missing braces mtd: cfi_flash: fix indentation net: e1000: fix indentation net: ldpaa_eth: add missing braces net: rtl8169: remove unneeded definition marvell: comphy_a3700: fix bitmask usb: eth: r8152_fw: fix indentation davinci: da8xxevm: fix indentation phy: micrel: add missing braces cmd: tpm_test: fix indentation Xilinx ZynqMP: fix minimum SDHCI frequency usb: gadget: remove unused shortname variable board/davinci/da8xxevm/da850evm.c | 4 ++-- board/freescale/ls2080aqds/eth.c | 3 ++- cmd/tpm_test.c | 4 ++-- drivers/mtd/cfi_flash.c | 4 ++-- drivers/net/e1000.c | 5 ++--- drivers/net/ldpaa_eth/ldpaa_eth.c | 3 ++- drivers/net/phy/micrel.c | 3 ++- drivers/net/rtl8169.c | 3 --- drivers/phy/marvell/comphy_a3700.h | 4 ++-- drivers/usb/eth/r8152_fw.c | 8 ++++---- drivers/usb/gadget/ether.c | 1 - include/configs/xilinx_zynqmp_ep.h | 2 +- 12 files changed, 21 insertions(+), 23 deletions(-) -- 2.8.2

11 38

[U-Boot] Please pull u-boot-mpc85xx master
by york sun 05 Dec '16

05 Dec '16

Tom, The following changes since commit 6b29a395b62965eef6b5065d3a526a8588a92038: Merge git://git.denx.de/u-boot-mpc85xx (2016-11-29 19:42:48 -0500) are available in the git repository at: git://git.denx.de/u-boot-mpc85xx.git for you to fetch changes up to 54db3c20bdc43c458854446939b706b4adee46cf: powerpc: mpc86xx: Convert CONFIG_SYS_FSL_NUM_LAWS to Kconfig option (2016-12-04 08:59:11 -0800) ---------------------------------------------------------------- York Sun (11): powerpc: cyrus: Separate P5020/P5040 config options powerpc: mpc85xx: Convert CONFIG_SYS_CCSRBAR_DEFAULT to Kconfig option powerpc: mpc86xx: Convert CONFIG_SYS_CCSRBAR_DEFAULT to Kconfig option script: remove CONFIG_SYS_CCSRBAR_DEFAULT from white list armv7: ls1021a: Move SECURE_BOOT option to Kconfig armv8: fsl-layerscape: Move SECURE_BOOT to Kconfig powerpc: mpc85xx: Move SECURE_BOOT to Kconfig powerpc: mpc85xx: Move CONFIG_FSL_LAW to Kconfig powerpc: mpc86xx: Move CONFIG_FSL_LAW to Kconfig powerpc: mpc85xx: Convert CONFIG_SYS_FSL_NUM_LAWS to Kconfig option powerpc: mpc86xx: Convert CONFIG_SYS_FSL_NUM_LAWS to Kconfig option arch/arm/cpu/armv7/ls102xa/Kconfig | 6 + arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 5 + arch/arm/include/asm/arch-fsl-layerscape/config.h | 1 - .../include/asm/arch-fsl-layerscape/immap_lsch2.h | 4 +- arch/powerpc/cpu/mpc85xx/Kconfig | 156 ++++++++++++++++++++- arch/powerpc/cpu/mpc86xx/Kconfig | 22 +++ arch/powerpc/include/asm/config_mpc85xx.h | 73 ---------- arch/powerpc/include/asm/config_mpc86xx.h | 12 -- board/varisys/cyrus/Kconfig | 2 +- configs/B4860QDS_SECURE_BOOT_defconfig | 2 +- configs/BSC9132QDS_NAND_DDRCLK100_SECURE_defconfig | 3 +- configs/BSC9132QDS_NAND_DDRCLK133_SECURE_defconfig | 3 +- configs/BSC9132QDS_NOR_DDRCLK100_SECURE_defconfig | 3 +- configs/BSC9132QDS_NOR_DDRCLK133_SECURE_defconfig | 3 +- .../BSC9132QDS_SDCARD_DDRCLK100_SECURE_defconfig | 3 +- .../BSC9132QDS_SDCARD_DDRCLK133_SECURE_defconfig | 3 +- .../BSC9132QDS_SPIFLASH_DDRCLK100_SECURE_defconfig | 3 +- .../BSC9132QDS_SPIFLASH_DDRCLK133_SECURE_defconfig | 3 +- configs/C29XPCIE_NOR_SECBOOT_defconfig | 2 +- configs/C29XPCIE_SPIFLASH_SECBOOT_defconfig | 3 +- configs/Cyrus_P5020_defconfig | 4 +- configs/Cyrus_P5040_defconfig | 4 +- configs/P1010RDB-PA_36BIT_NAND_SECBOOT_defconfig | 3 +- configs/P1010RDB-PA_36BIT_NOR_SECBOOT_defconfig | 2 +- .../P1010RDB-PA_36BIT_SPIFLASH_SECBOOT_defconfig | 3 +- configs/P1010RDB-PA_NAND_SECBOOT_defconfig | 3 +- configs/P1010RDB-PA_NOR_SECBOOT_defconfig | 2 +- configs/P1010RDB-PA_SPIFLASH_SECBOOT_defconfig | 3 +- configs/P1010RDB-PB_36BIT_NAND_SECBOOT_defconfig | 3 +- configs/P1010RDB-PB_36BIT_NOR_SECBOOT_defconfig | 2 +- .../P1010RDB-PB_36BIT_SPIFLASH_SECBOOT_defconfig | 3 +- configs/P1010RDB-PB_NAND_SECBOOT_defconfig | 3 +- configs/P1010RDB-PB_NOR_SECBOOT_defconfig | 2 +- configs/P1010RDB-PB_SPIFLASH_SECBOOT_defconfig | 3 +- configs/P2041RDB_SECURE_BOOT_defconfig | 2 +- configs/P3041DS_NAND_SECURE_BOOT_defconfig | 3 +- configs/P3041DS_SECURE_BOOT_defconfig | 2 +- configs/P4080DS_SECURE_BOOT_defconfig | 2 +- configs/P5020DS_NAND_SECURE_BOOT_defconfig | 3 +- configs/P5020DS_SECURE_BOOT_defconfig | 2 +- configs/P5040DS_NAND_SECURE_BOOT_defconfig | 3 +- configs/P5040DS_SECURE_BOOT_defconfig | 2 +- configs/T1023RDB_SECURE_BOOT_defconfig | 3 +- configs/T1024QDS_DDR4_SECURE_BOOT_defconfig | 3 +- configs/T1024QDS_SECURE_BOOT_defconfig | 2 +- configs/T1024RDB_SECURE_BOOT_defconfig | 3 +- configs/T1040D4RDB_SECURE_BOOT_defconfig | 3 +- configs/T1040QDS_SECURE_BOOT_defconfig | 2 +- configs/T1040RDB_SECURE_BOOT_defconfig | 2 +- configs/T1042D4RDB_SECURE_BOOT_defconfig | 3 +- configs/T1042RDB_PI_NAND_SECURE_BOOT_defconfig | 3 +- configs/T1042RDB_SECURE_BOOT_defconfig | 2 +- configs/T2080QDS_SECURE_BOOT_defconfig | 2 +- configs/T2080RDB_SECURE_BOOT_defconfig | 2 +- configs/T4160QDS_SECURE_BOOT_defconfig | 2 +- configs/T4240QDS_SECURE_BOOT_defconfig | 2 +- configs/ls1021aqds_nor_SECURE_BOOT_defconfig | 2 +- configs/ls1021atwr_nor_SECURE_BOOT_defconfig | 2 +- .../ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig | 3 +- configs/ls1043ardb_SECURE_BOOT_defconfig | 2 +- configs/ls2080aqds_SECURE_BOOT_defconfig | 3 +- configs/ls2080ardb_SECURE_BOOT_defconfig | 3 +- doc/README.ramboot-ppc85xx | 4 +- include/configs/B4860QDS.h | 3 - include/configs/BSC9131RDB.h | 1 - include/configs/BSC9132QDS.h | 1 - include/configs/C29XPCIE.h | 1 - include/configs/MPC8536DS.h | 1 - include/configs/MPC8540ADS.h | 1 - include/configs/MPC8541CDS.h | 2 - include/configs/MPC8544DS.h | 2 - include/configs/MPC8548CDS.h | 1 - include/configs/MPC8555CDS.h | 1 - include/configs/MPC8560ADS.h | 1 - include/configs/MPC8568MDS.h | 1 - include/configs/MPC8569MDS.h | 1 - include/configs/MPC8572DS.h | 2 - include/configs/MPC8610HPCD.h | 2 - include/configs/MPC8641HPCN.h | 2 - include/configs/P1010RDB.h | 3 - include/configs/P1022DS.h | 4 - include/configs/P1023RDB.h | 1 - include/configs/P2041RDB.h | 2 - include/configs/T102xQDS.h | 2 - include/configs/T102xRDB.h | 2 - include/configs/T1040QDS.h | 2 - include/configs/T104xRDB.h | 3 - include/configs/T208xQDS.h | 2 - include/configs/T208xRDB.h | 2 - include/configs/T4240QDS.h | 1 - include/configs/T4240RDB.h | 3 - include/configs/UCP1020.h | 2 - include/configs/controlcenterd.h | 1 - include/configs/corenet_ds.h | 2 - include/configs/cyrus.h | 2 - include/configs/km/kmp204x-common.h | 2 - include/configs/p1_p2_rdb_pc.h | 3 - include/configs/p1_twr.h | 1 - include/configs/sbc8548.h | 2 - include/configs/sbc8641d.h | 2 - include/configs/socrates.h | 2 - include/configs/t4qds.h | 2 - include/configs/xpedite517x.h | 2 - include/configs/xpedite520x.h | 1 - include/configs/xpedite537x.h | 1 - include/configs/xpedite550x.h | 1 - scripts/config_whitelist.txt | 3 - 107 files changed, 276 insertions(+), 227 deletions(-) Thanks. York

2 1

[U-Boot] Please pull u-boot-dm (take 2)
by Simon Glass 04 Dec '16

04 Dec '16

Hi Tom, (new version with more patches) Here are some buildman enhancements, a new TPM driver, the beginnings of the USB gadget DM conversion along with a few fixes and improvements. The following changes since commit 9ae0e14350758e6447c90615ff4df530549a45e2: Merge git://www.denx.de/git/u-boot-marvell (2016-12-01 09:24:02 -0500) are available in the git repository at: git://git.denx.de/u-boot-dm.git for you to fetch changes up to a2558e8729831e0bcef634ea2440e60425ef0ff6: cmd: crosec: Move cros_ec_decode_region helper to cmd/cros_ec.c (2016-12-02 21:04:48 -0700) ---------------------------------------------------------------- Fabien Parent (1): cmd/fdt: fix uncallable systemsetup command George McCollister (1): tpm: tpm_tis_lpc: Add support for AT97SC3204 Masahiro Yamada (1): libfdt: replace ARCH_FIXUP_FDT with ARCH_FIXUP_FDT_MEMORY Meng Yi (1): rtc: Add RTC chip pcf2127 support Michal Simek (1): dm: blk: Fix get_desc to return block device descriptor Moritz Fischer (1): cmd: crosec: Move cros_ec_decode_region helper to cmd/cros_ec.c Mugunthan V N (11): drivers: usb: gadget: ether: access network_started using local variable drivers: usb: gadget: ether: adopt to usb driver model drivers: usb: gadget: ether: consolidate global devices to single struct drivers: usb: gadget: ether: use net device priv to pass usb ether priv drivers: usb: gadget: ether: prepare driver for driver model migration configs: am335x: usb: do not define CONFIG_DM_USB for spl am33xx: board: do not register usb devices when CONFIG_DM_USB is defined drivers: usb: musb: add ti musb misc driver for wrapper am33xx: board: probe misc drivers to register musb devices drivers: usb: musb: adopt musb backend driver to driver model drivers: usb: musb: add ti musb host driver with driver model support Simon Glass (7): Makefile: Add a target to create the .cfg files buildman: Add an option to just create the config buildman: Add documentation for CONFIG checking buildman: Squash useless output from -K buildman: Clean up odd characters on the terminal buildman: Rename do_build to config_only dm: core: Handle global_data moving in SPL Stefan Brüns (1): cmd/tpm_test: Fix misleading code indentation Stefan Roese (1): dm: core: Add dev_get_addr_size_index() to retrieve addr and size Tom Rini (1): sandboxfs: Fix resource leak Kconfig | 5 +- Makefile | 3 + arch/arc/lib/bootm.c | 5 + arch/arm/include/asm/arch-omap3/musb.h | 6 +- arch/arm/include/asm/omap_musb.h | 7 +- arch/arm/lib/bootm-fdt.c | 2 - arch/arm/lib/bootm.c | 2 - arch/arm/mach-omap2/am33xx/board.c | 16 ++- arch/arm/mach-omap2/omap3/am35x_musb.c | 6 +- arch/microblaze/lib/bootm.c | 5 + arch/mips/lib/bootm.c | 2 - arch/powerpc/lib/bootm.c | 5 + arch/sandbox/lib/bootm.c | 5 + arch/x86/lib/bootm.c | 5 + cmd/cros_ec.c | 23 +++++ cmd/fdt.c | 22 ++-- cmd/tpm_test.c | 12 +-- common/fdt_support.c | 2 + common/image-fdt.c | 2 - common/spl/spl.c | 3 + drivers/block/blk-uclass.c | 2 + drivers/core/device.c | 22 ++++ drivers/core/root.c | 7 ++ drivers/misc/cros_ec.c | 16 --- drivers/rtc/Kconfig | 6 ++ drivers/rtc/Makefile | 1 + drivers/rtc/pcf2127.c | 107 +++++++++++++++++++ drivers/tpm/tpm_tis_lpc.c | 37 +++++-- drivers/usb/gadget/ether.c | 168 ++++++++++++++++++++---------- drivers/usb/musb-new/Kconfig | 9 ++ drivers/usb/musb-new/Makefile | 1 + drivers/usb/musb-new/am35x.c | 14 +-- drivers/usb/musb-new/musb_dsps.c | 8 +- drivers/usb/musb-new/ti-musb.c | 255 ++++++++++++++++++++++++++++++++++++++++++++++ fs/sandbox/sandboxfs.c | 5 +- include/configs/am335x_evm.h | 1 + include/cros_ec.h | 9 -- include/dm/device.h | 16 +++ include/dm/root.h | 10 ++ include/fdt_support.h | 8 ++ tools/buildman/README | 49 +++++++++ tools/buildman/builder.py | 39 ++++--- tools/buildman/builderthread.py | 14 ++- tools/buildman/cmdline.py | 4 + tools/buildman/control.py | 4 +- 45 files changed, 790 insertions(+), 160 deletions(-) create mode 100644 drivers/rtc/pcf2127.c create mode 100644 drivers/usb/musb-new/ti-musb.c Regards, Simon

2 1