December 2016 - U-Boot

[U-Boot] [PATCH 00/10] driver model bring-up of dwc3 usb peripheral
by Mugunthan V N 20 Dec '16

20 Dec '16

This patch series enables dwc3 usb driver to adopt driver model. This has been tested on AM437x evm sk (logs [1]) by loading kernel through usb ether Also pushed a branch for testing [2] [1] - http://pastebin.ubuntu.com/15391169/ [2] - git://git.ti.com/~mugunthanvnm/ti-u-boot/mugunth-ti-u-boot.git dm-dwc3 Kishon Vijay Abraham I (1): configs: am43xx: Add am43xx_evm_usbspl_defconfig Mugunthan V N (8): drivers: usb: dwc3: remove devm_zalloc from linux_compact drivers: usb: dwc3-omap: move usb_gadget_handle_interrupts from board files to drivers am437x: board: do not register usb devices when CONFIG_DM_USB is defined dra7xx: board: do not register usb devices when CONFIG_DM_USB is defined drivers: usb: dwc3: add ti dwc3 misc driver for wrapper drivers: usb: common: add support to get maximum speed from dt drivers: usb: dwc3: add ti dwc3 peripheral driver with driver model support defconfig: am437x_sk_evm: enable usb driver model Tom Rini (1): am43xx: Add USB device boot support to SPL board/ti/am43xx/MAINTAINERS | 1 + board/ti/am43xx/board.c | 52 +++++--- board/ti/am57xx/board.c | 11 -- board/ti/dra7xx/evm.c | 13 +- configs/am437x_sk_evm_defconfig | 4 + configs/am43xx_evm_usbspl_defconfig | 9 ++ drivers/Makefile | 2 + drivers/usb/common/common.c | 29 +++++ drivers/usb/dwc3/core.c | 64 +++++++++- drivers/usb/dwc3/core.h | 6 + drivers/usb/dwc3/dwc3-omap.c | 230 +++++++++++++++++++++++++++++++++++- drivers/usb/dwc3/gadget.c | 2 +- drivers/usb/dwc3/linux-compat.h | 5 - drivers/usb/dwc3/ti_usb_phy.c | 1 + drivers/usb/gadget/gadget_chips.h | 2 + include/configs/am43xx_evm.h | 13 ++ include/linux/usb/otg.h | 9 ++ 17 files changed, 406 insertions(+), 47 deletions(-) create mode 100644 configs/am43xx_evm_usbspl_defconfig -- 2.7.2.333.g70bd996

5 34

[U-Boot] [PATCH 1/2] Convert CONFIG_SPL_RAM_DEVICE to defconfig
by Stefan Agner 20 Dec '16

20 Dec '16

From: Stefan Agner <stefan.agner(a)toradex.com> This converts the following to Kconfig: CONFIG_SPL_RAM_DEVICE Signed-off-by: Stefan Agner <stefan.agner(a)toradex.com> --- common/spl/Kconfig | 8 ++++++++ configs/apalis_t30_defconfig | 1 + configs/beaver_defconfig | 1 + configs/cardhu_defconfig | 1 + configs/cei-tk1-som_defconfig | 1 + configs/colibri_t20_defconfig | 1 + configs/colibri_t30_defconfig | 1 + configs/dalmore_defconfig | 1 + configs/harmony_defconfig | 1 + configs/jetson-tk1_defconfig | 1 + configs/medcom-wide_defconfig | 1 + configs/nyan-big_defconfig | 1 + configs/paz00_defconfig | 1 + configs/plutux_defconfig | 1 + configs/seaboard_defconfig | 1 + configs/socfpga_arria5_defconfig | 1 + configs/socfpga_cyclone5_defconfig | 1 + configs/socfpga_de0_nano_soc_defconfig | 1 + configs/socfpga_de1_soc_defconfig | 1 + configs/socfpga_is1_defconfig | 1 + configs/socfpga_mcvevk_defconfig | 1 + configs/socfpga_sockit_defconfig | 1 + configs/socfpga_socrates_defconfig | 1 + configs/socfpga_sr1500_defconfig | 1 + configs/socfpga_vining_fpga_defconfig | 1 + configs/tec-ng_defconfig | 1 + configs/tec_defconfig | 1 + configs/topic_miami_defconfig | 1 + configs/topic_miamiplus_defconfig | 1 + configs/trimslice_defconfig | 1 + configs/venice2_defconfig | 1 + configs/ventana_defconfig | 1 + configs/whistler_defconfig | 1 + configs/zynq_microzed_defconfig | 1 + configs/zynq_picozed_defconfig | 1 + configs/zynq_zc702_defconfig | 1 + configs/zynq_zc706_defconfig | 1 + configs/zynq_zc770_xm010_defconfig | 1 + configs/zynq_zc770_xm011_defconfig | 1 + configs/zynq_zc770_xm012_defconfig | 1 + configs/zynq_zc770_xm013_defconfig | 1 + configs/zynq_zed_defconfig | 1 + configs/zynq_zybo_defconfig | 1 + include/configs/microblaze-generic.h | 1 - include/configs/socfpga_common.h | 1 - include/configs/tegra-common.h | 1 - include/configs/xilinx_zynqmp.h | 1 - include/configs/zynq-common.h | 1 - 48 files changed, 50 insertions(+), 5 deletions(-) diff --git a/common/spl/Kconfig b/common/spl/Kconfig index cba51f5..8f779e6 100644 --- a/common/spl/Kconfig +++ b/common/spl/Kconfig @@ -449,6 +449,14 @@ config SPL_POWER_SUPPORT in drivers/power, drivers/power/pmic and drivers/power/regulator as part of an SPL build. +config SPL_RAM_DEVICE + bool "Support booting from preloaded image in RAM" + depends on SPL + help + Enable booting of an image already loaded in RAM. The image has to + be already in memory when SPL takes over, e.g. loaded by the boot + ROM. + config SPL_SATA_SUPPORT bool "Support loading from SATA" depends on SPL diff --git a/configs/apalis_t30_defconfig b/configs/apalis_t30_defconfig index 691148c..68ada32 100644 --- a/configs/apalis_t30_defconfig +++ b/configs/apalis_t30_defconfig @@ -7,6 +7,7 @@ CONFIG_OF_SYSTEM_SETUP=y CONFIG_CONSOLE_MUX=y CONFIG_SYS_STDIO_DEREGISTER=y # CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_SPL_RAM_DEVICE=y CONFIG_SYS_PROMPT="Apalis T30 # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set diff --git a/configs/beaver_defconfig b/configs/beaver_defconfig index 5cb73c0..7af382d 100644 --- a/configs/beaver_defconfig +++ b/configs/beaver_defconfig @@ -6,6 +6,7 @@ CONFIG_DEFAULT_DEVICE_TREE="tegra30-beaver" CONFIG_OF_SYSTEM_SETUP=y CONFIG_CONSOLE_MUX=y CONFIG_SYS_STDIO_DEREGISTER=y +CONFIG_SPL_RAM_DEVICE=y CONFIG_SYS_PROMPT="Tegra30 (Beaver) # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set diff --git a/configs/cardhu_defconfig b/configs/cardhu_defconfig index 0214758..9673387 100644 --- a/configs/cardhu_defconfig +++ b/configs/cardhu_defconfig @@ -6,6 +6,7 @@ CONFIG_DEFAULT_DEVICE_TREE="tegra30-cardhu" CONFIG_OF_SYSTEM_SETUP=y CONFIG_CONSOLE_MUX=y CONFIG_SYS_STDIO_DEREGISTER=y +CONFIG_SPL_RAM_DEVICE=y CONFIG_SYS_PROMPT="Tegra30 (Cardhu) # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set diff --git a/configs/cei-tk1-som_defconfig b/configs/cei-tk1-som_defconfig index 909b367..f901296 100644 --- a/configs/cei-tk1-som_defconfig +++ b/configs/cei-tk1-som_defconfig @@ -6,6 +6,7 @@ CONFIG_DEFAULT_DEVICE_TREE="tegra124-cei-tk1-som" CONFIG_OF_SYSTEM_SETUP=y CONFIG_CONSOLE_MUX=y CONFIG_SYS_STDIO_DEREGISTER=y +CONFIG_SPL_RAM_DEVICE=y CONFIG_SYS_PROMPT="Tegra124 (TK1-SOM) # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set diff --git a/configs/colibri_t20_defconfig b/configs/colibri_t20_defconfig index a543246..7806799 100644 --- a/configs/colibri_t20_defconfig +++ b/configs/colibri_t20_defconfig @@ -6,6 +6,7 @@ CONFIG_DEFAULT_DEVICE_TREE="tegra20-colibri" CONFIG_OF_SYSTEM_SETUP=y CONFIG_SYS_STDIO_DEREGISTER=y # CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_SPL_RAM_DEVICE=y CONFIG_SYS_PROMPT="Colibri T20 # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set diff --git a/configs/colibri_t30_defconfig b/configs/colibri_t30_defconfig index 2ab6764..fd27e4f 100644 --- a/configs/colibri_t30_defconfig +++ b/configs/colibri_t30_defconfig @@ -7,6 +7,7 @@ CONFIG_OF_SYSTEM_SETUP=y CONFIG_CONSOLE_MUX=y CONFIG_SYS_STDIO_DEREGISTER=y # CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_SPL_RAM_DEVICE=y CONFIG_SYS_PROMPT="Colibri T30 # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set diff --git a/configs/dalmore_defconfig b/configs/dalmore_defconfig index 0db2d1d..159e98a 100644 --- a/configs/dalmore_defconfig +++ b/configs/dalmore_defconfig @@ -6,6 +6,7 @@ CONFIG_DEFAULT_DEVICE_TREE="tegra114-dalmore" CONFIG_OF_SYSTEM_SETUP=y CONFIG_CONSOLE_MUX=y CONFIG_SYS_STDIO_DEREGISTER=y +CONFIG_SPL_RAM_DEVICE=y CONFIG_SYS_PROMPT="Tegra114 (Dalmore) # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set diff --git a/configs/harmony_defconfig b/configs/harmony_defconfig index d8712d5..9d14df9 100644 --- a/configs/harmony_defconfig +++ b/configs/harmony_defconfig @@ -5,6 +5,7 @@ CONFIG_TARGET_HARMONY=y CONFIG_DEFAULT_DEVICE_TREE="tegra20-harmony" CONFIG_OF_SYSTEM_SETUP=y CONFIG_SYS_STDIO_DEREGISTER=y +CONFIG_SPL_RAM_DEVICE=y CONFIG_SYS_PROMPT="Tegra20 (Harmony) # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set diff --git a/configs/jetson-tk1_defconfig b/configs/jetson-tk1_defconfig index b0aa3c7..3406abc 100644 --- a/configs/jetson-tk1_defconfig +++ b/configs/jetson-tk1_defconfig @@ -6,6 +6,7 @@ CONFIG_DEFAULT_DEVICE_TREE="tegra124-jetson-tk1" CONFIG_OF_SYSTEM_SETUP=y CONFIG_CONSOLE_MUX=y CONFIG_SYS_STDIO_DEREGISTER=y +CONFIG_SPL_RAM_DEVICE=y CONFIG_SYS_PROMPT="Tegra124 (Jetson TK1) # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set diff --git a/configs/medcom-wide_defconfig b/configs/medcom-wide_defconfig index a65c3ad..2ed76c3 100644 --- a/configs/medcom-wide_defconfig +++ b/configs/medcom-wide_defconfig @@ -6,6 +6,7 @@ CONFIG_DEFAULT_DEVICE_TREE="tegra20-medcom-wide" CONFIG_FIT=y CONFIG_OF_SYSTEM_SETUP=y CONFIG_SYS_STDIO_DEREGISTER=y +CONFIG_SPL_RAM_DEVICE=y CONFIG_SYS_PROMPT="Tegra20 (Medcom-Wide) # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set diff --git a/configs/nyan-big_defconfig b/configs/nyan-big_defconfig index e6f862d..7953531 100644 --- a/configs/nyan-big_defconfig +++ b/configs/nyan-big_defconfig @@ -7,6 +7,7 @@ CONFIG_FIT=y CONFIG_FIT_BEST_MATCH=y CONFIG_OF_SYSTEM_SETUP=y CONFIG_SYS_STDIO_DEREGISTER=y +CONFIG_SPL_RAM_DEVICE=y CONFIG_SYS_PROMPT="Tegra124 (Nyan-big) # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set diff --git a/configs/paz00_defconfig b/configs/paz00_defconfig index b3d6f90..07f9d24 100644 --- a/configs/paz00_defconfig +++ b/configs/paz00_defconfig @@ -5,6 +5,7 @@ CONFIG_TARGET_PAZ00=y CONFIG_DEFAULT_DEVICE_TREE="tegra20-paz00" CONFIG_OF_SYSTEM_SETUP=y CONFIG_SYS_STDIO_DEREGISTER=y +CONFIG_SPL_RAM_DEVICE=y CONFIG_SYS_PROMPT="Tegra20 (Paz00) MOD # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set diff --git a/configs/plutux_defconfig b/configs/plutux_defconfig index 3c45b9d..9e3b2f3 100644 --- a/configs/plutux_defconfig +++ b/configs/plutux_defconfig @@ -7,6 +7,7 @@ CONFIG_FIT=y CONFIG_OF_SYSTEM_SETUP=y CONFIG_CONSOLE_MUX=y CONFIG_SYS_STDIO_DEREGISTER=y +CONFIG_SPL_RAM_DEVICE=y CONFIG_SYS_PROMPT="Tegra20 (Plutux) # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set diff --git a/configs/seaboard_defconfig b/configs/seaboard_defconfig index c3119dc..f066c06 100644 --- a/configs/seaboard_defconfig +++ b/configs/seaboard_defconfig @@ -4,6 +4,7 @@ CONFIG_TEGRA20=y CONFIG_TARGET_SEABOARD=y CONFIG_DEFAULT_DEVICE_TREE="tegra20-seaboard" CONFIG_OF_SYSTEM_SETUP=y +CONFIG_SPL_RAM_DEVICE=y CONFIG_SYS_PROMPT="Tegra20 (SeaBoard) # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set diff --git a/configs/socfpga_arria5_defconfig b/configs/socfpga_arria5_defconfig index d91990c..5f7615b 100644 --- a/configs/socfpga_arria5_defconfig +++ b/configs/socfpga_arria5_defconfig @@ -13,6 +13,7 @@ CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_STACK_R=y +CONFIG_SPL_RAM_DEVICE=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set diff --git a/configs/socfpga_cyclone5_defconfig b/configs/socfpga_cyclone5_defconfig index 905f766..11c4205 100644 --- a/configs/socfpga_cyclone5_defconfig +++ b/configs/socfpga_cyclone5_defconfig @@ -13,6 +13,7 @@ CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_STACK_R=y +CONFIG_SPL_RAM_DEVICE=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set diff --git a/configs/socfpga_de0_nano_soc_defconfig b/configs/socfpga_de0_nano_soc_defconfig index 7daf81a..8edbe06 100644 --- a/configs/socfpga_de0_nano_soc_defconfig +++ b/configs/socfpga_de0_nano_soc_defconfig @@ -13,6 +13,7 @@ CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_STACK_R=y +CONFIG_SPL_RAM_DEVICE=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set diff --git a/configs/socfpga_de1_soc_defconfig b/configs/socfpga_de1_soc_defconfig index d8a3b82..e306062 100644 --- a/configs/socfpga_de1_soc_defconfig +++ b/configs/socfpga_de1_soc_defconfig @@ -15,6 +15,7 @@ CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_STACK_R=y +CONFIG_SPL_RAM_DEVICE=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set diff --git a/configs/socfpga_is1_defconfig b/configs/socfpga_is1_defconfig index a0f04d0..84c5463 100644 --- a/configs/socfpga_is1_defconfig +++ b/configs/socfpga_is1_defconfig @@ -12,6 +12,7 @@ CONFIG_VERSION_VARIABLE=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SPL=y CONFIG_SPL_STACK_R=y +CONFIG_SPL_RAM_DEVICE=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set diff --git a/configs/socfpga_mcvevk_defconfig b/configs/socfpga_mcvevk_defconfig index 5a53246..192a4b9 100644 --- a/configs/socfpga_mcvevk_defconfig +++ b/configs/socfpga_mcvevk_defconfig @@ -13,6 +13,7 @@ CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_STACK_R=y +CONFIG_SPL_RAM_DEVICE=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set diff --git a/configs/socfpga_sockit_defconfig b/configs/socfpga_sockit_defconfig index 9450d21..bd52885 100644 --- a/configs/socfpga_sockit_defconfig +++ b/configs/socfpga_sockit_defconfig @@ -13,6 +13,7 @@ CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_STACK_R=y +CONFIG_SPL_RAM_DEVICE=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set diff --git a/configs/socfpga_socrates_defconfig b/configs/socfpga_socrates_defconfig index 84a8890..9c5dd45 100644 --- a/configs/socfpga_socrates_defconfig +++ b/configs/socfpga_socrates_defconfig @@ -13,6 +13,7 @@ CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_STACK_R=y +CONFIG_SPL_RAM_DEVICE=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set diff --git a/configs/socfpga_sr1500_defconfig b/configs/socfpga_sr1500_defconfig index 641dd4d..b7b1bfc 100644 --- a/configs/socfpga_sr1500_defconfig +++ b/configs/socfpga_sr1500_defconfig @@ -14,6 +14,7 @@ CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_STACK_R=y +CONFIG_SPL_RAM_DEVICE=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set diff --git a/configs/socfpga_vining_fpga_defconfig b/configs/socfpga_vining_fpga_defconfig index 608cdf8..d95c399 100644 --- a/configs/socfpga_vining_fpga_defconfig +++ b/configs/socfpga_vining_fpga_defconfig @@ -14,6 +14,7 @@ CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_STACK_R=y +CONFIG_SPL_RAM_DEVICE=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set diff --git a/configs/tec-ng_defconfig b/configs/tec-ng_defconfig index f52f19b..d554688 100644 --- a/configs/tec-ng_defconfig +++ b/configs/tec-ng_defconfig @@ -7,6 +7,7 @@ CONFIG_FIT=y CONFIG_OF_SYSTEM_SETUP=y CONFIG_CONSOLE_MUX=y CONFIG_SYS_STDIO_DEREGISTER=y +CONFIG_SPL_RAM_DEVICE=y CONFIG_SYS_PROMPT="Tegra30 (TEC-NG) # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set diff --git a/configs/tec_defconfig b/configs/tec_defconfig index 1ccec73..fe4b27c 100644 --- a/configs/tec_defconfig +++ b/configs/tec_defconfig @@ -6,6 +6,7 @@ CONFIG_DEFAULT_DEVICE_TREE="tegra20-tec" CONFIG_FIT=y CONFIG_OF_SYSTEM_SETUP=y CONFIG_SYS_STDIO_DEREGISTER=y +CONFIG_SPL_RAM_DEVICE=y CONFIG_SYS_PROMPT="Tegra20 (TEC) # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set diff --git a/configs/topic_miami_defconfig b/configs/topic_miami_defconfig index 3d6161e..4ecd00d 100644 --- a/configs/topic_miami_defconfig +++ b/configs/topic_miami_defconfig @@ -8,6 +8,7 @@ CONFIG_BOOTDELAY=0 CONFIG_SYS_NO_FLASH=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_SPL=y +CONFIG_SPL_RAM_DEVICE=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="zynq-uboot> " # CONFIG_CMD_IMLS is not set diff --git a/configs/topic_miamiplus_defconfig b/configs/topic_miamiplus_defconfig index 3160f00..5edbf5c 100644 --- a/configs/topic_miamiplus_defconfig +++ b/configs/topic_miamiplus_defconfig @@ -8,6 +8,7 @@ CONFIG_BOOTDELAY=0 CONFIG_SYS_NO_FLASH=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_SPL=y +CONFIG_SPL_RAM_DEVICE=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="zynq-uboot> " # CONFIG_CMD_IMLS is not set diff --git a/configs/trimslice_defconfig b/configs/trimslice_defconfig index a145ff8..3959689 100644 --- a/configs/trimslice_defconfig +++ b/configs/trimslice_defconfig @@ -6,6 +6,7 @@ CONFIG_DEFAULT_DEVICE_TREE="tegra20-trimslice" CONFIG_OF_SYSTEM_SETUP=y CONFIG_CONSOLE_MUX=y CONFIG_SYS_STDIO_DEREGISTER=y +CONFIG_SPL_RAM_DEVICE=y CONFIG_SYS_PROMPT="Tegra20 (TrimSlice) # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set diff --git a/configs/venice2_defconfig b/configs/venice2_defconfig index 8ff879f..635184c 100644 --- a/configs/venice2_defconfig +++ b/configs/venice2_defconfig @@ -6,6 +6,7 @@ CONFIG_DEFAULT_DEVICE_TREE="tegra124-venice2" CONFIG_OF_SYSTEM_SETUP=y CONFIG_CONSOLE_MUX=y CONFIG_SYS_STDIO_DEREGISTER=y +CONFIG_SPL_RAM_DEVICE=y CONFIG_SYS_PROMPT="Tegra124 (Venice2) # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set diff --git a/configs/ventana_defconfig b/configs/ventana_defconfig index 1f2809a..a5ebda2 100644 --- a/configs/ventana_defconfig +++ b/configs/ventana_defconfig @@ -4,6 +4,7 @@ CONFIG_TEGRA20=y CONFIG_TARGET_VENTANA=y CONFIG_DEFAULT_DEVICE_TREE="tegra20-ventana" CONFIG_OF_SYSTEM_SETUP=y +CONFIG_SPL_RAM_DEVICE=y CONFIG_SYS_PROMPT="Tegra20 (Ventana) # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set diff --git a/configs/whistler_defconfig b/configs/whistler_defconfig index b7c3ed9..471a6b6 100644 --- a/configs/whistler_defconfig +++ b/configs/whistler_defconfig @@ -6,6 +6,7 @@ CONFIG_DEFAULT_DEVICE_TREE="tegra20-whistler" CONFIG_OF_SYSTEM_SETUP=y CONFIG_CONSOLE_MUX=y CONFIG_SYS_STDIO_DEREGISTER=y +CONFIG_SPL_RAM_DEVICE=y CONFIG_SYS_PROMPT="Tegra20 (Whistler) # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set diff --git a/configs/zynq_microzed_defconfig b/configs/zynq_microzed_defconfig index 16d26c0..02c64e1 100644 --- a/configs/zynq_microzed_defconfig +++ b/configs/zynq_microzed_defconfig @@ -8,6 +8,7 @@ CONFIG_SYS_NO_FLASH=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_SPL=y CONFIG_SPL_OS_BOOT=y +CONFIG_SPL_RAM_DEVICE=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="Zynq> " # CONFIG_CMD_IMLS is not set diff --git a/configs/zynq_picozed_defconfig b/configs/zynq_picozed_defconfig index 3ba6b66..3502882 100644 --- a/configs/zynq_picozed_defconfig +++ b/configs/zynq_picozed_defconfig @@ -5,6 +5,7 @@ CONFIG_SYS_NO_FLASH=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_SPL=y CONFIG_SPL_OS_BOOT=y +CONFIG_SPL_RAM_DEVICE=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="Zynq> " # CONFIG_CMD_IMLS is not set diff --git a/configs/zynq_zc702_defconfig b/configs/zynq_zc702_defconfig index 117bfda..b4cef10 100644 --- a/configs/zynq_zc702_defconfig +++ b/configs/zynq_zc702_defconfig @@ -9,6 +9,7 @@ CONFIG_SYS_NO_FLASH=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_SPL=y CONFIG_SPL_OS_BOOT=y +CONFIG_SPL_RAM_DEVICE=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="Zynq> " # CONFIG_CMD_IMLS is not set diff --git a/configs/zynq_zc706_defconfig b/configs/zynq_zc706_defconfig index ef73849..007a547 100644 --- a/configs/zynq_zc706_defconfig +++ b/configs/zynq_zc706_defconfig @@ -9,6 +9,7 @@ CONFIG_SYS_NO_FLASH=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_SPL=y CONFIG_SPL_OS_BOOT=y +CONFIG_SPL_RAM_DEVICE=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="Zynq> " # CONFIG_CMD_IMLS is not set diff --git a/configs/zynq_zc770_xm010_defconfig b/configs/zynq_zc770_xm010_defconfig index 1419efa..f338504 100644 --- a/configs/zynq_zc770_xm010_defconfig +++ b/configs/zynq_zc770_xm010_defconfig @@ -9,6 +9,7 @@ CONFIG_SYS_NO_FLASH=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_SPL=y CONFIG_SPL_OS_BOOT=y +CONFIG_SPL_RAM_DEVICE=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="Zynq> " # CONFIG_CMD_IMLS is not set diff --git a/configs/zynq_zc770_xm011_defconfig b/configs/zynq_zc770_xm011_defconfig index 2f4fc1e..a64ead1 100644 --- a/configs/zynq_zc770_xm011_defconfig +++ b/configs/zynq_zc770_xm011_defconfig @@ -9,6 +9,7 @@ CONFIG_SYS_NO_FLASH=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_SPL=y CONFIG_SPL_OS_BOOT=y +CONFIG_SPL_RAM_DEVICE=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="Zynq> " # CONFIG_CMD_IMLS is not set diff --git a/configs/zynq_zc770_xm012_defconfig b/configs/zynq_zc770_xm012_defconfig index d3116e1..08069ae 100644 --- a/configs/zynq_zc770_xm012_defconfig +++ b/configs/zynq_zc770_xm012_defconfig @@ -8,6 +8,7 @@ CONFIG_SYS_EXTRA_OPTIONS="ZC770_XM012" # CONFIG_DISPLAY_CPUINFO is not set CONFIG_SPL=y CONFIG_SPL_OS_BOOT=y +CONFIG_SPL_RAM_DEVICE=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="Zynq> " CONFIG_CMD_GPIO=y diff --git a/configs/zynq_zc770_xm013_defconfig b/configs/zynq_zc770_xm013_defconfig index add038c..baa192c 100644 --- a/configs/zynq_zc770_xm013_defconfig +++ b/configs/zynq_zc770_xm013_defconfig @@ -9,6 +9,7 @@ CONFIG_SYS_NO_FLASH=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_SPL=y CONFIG_SPL_OS_BOOT=y +CONFIG_SPL_RAM_DEVICE=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="Zynq> " # CONFIG_CMD_IMLS is not set diff --git a/configs/zynq_zed_defconfig b/configs/zynq_zed_defconfig index 96f00e4..f4f9d01 100644 --- a/configs/zynq_zed_defconfig +++ b/configs/zynq_zed_defconfig @@ -8,6 +8,7 @@ CONFIG_SYS_NO_FLASH=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_SPL=y CONFIG_SPL_OS_BOOT=y +CONFIG_SPL_RAM_DEVICE=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="Zynq> " # CONFIG_CMD_IMLS is not set diff --git a/configs/zynq_zybo_defconfig b/configs/zynq_zybo_defconfig index dfac764..b990d44 100644 --- a/configs/zynq_zybo_defconfig +++ b/configs/zynq_zybo_defconfig @@ -9,6 +9,7 @@ CONFIG_SYS_NO_FLASH=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_SPL=y CONFIG_SPL_OS_BOOT=y +CONFIG_SPL_RAM_DEVICE=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="Zynq> " # CONFIG_CMD_IMLS is not set diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h index 7abffdb..cc90b73 100644 --- a/include/configs/microblaze-generic.h +++ b/include/configs/microblaze-generic.h @@ -284,7 +284,6 @@ #define CONFIG_SPL_LDSCRIPT "arch/microblaze/cpu/u-boot-spl.lds" -#define CONFIG_SPL_RAM_DEVICE #ifdef CONFIG_SYS_FLASH_BASE # define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_FLASH_BASE #endif diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h index 58a6550..7292469 100644 --- a/include/configs/socfpga_common.h +++ b/include/configs/socfpga_common.h @@ -309,7 +309,6 @@ unsigned int cm_get_qspi_controller_clk_hz(void); * 0xFFFF_FF00 ...... End of SRAM */ #define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_RAM_DEVICE #define CONFIG_SPL_TEXT_BASE CONFIG_SYS_INIT_RAM_ADDR #define CONFIG_SPL_MAX_SIZE (64 * 1024) diff --git a/include/configs/tegra-common.h b/include/configs/tegra-common.h index 63b711b..4d57b8d 100644 --- a/include/configs/tegra-common.h +++ b/include/configs/tegra-common.h @@ -104,7 +104,6 @@ /* Defines for SPL */ #define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_RAM_DEVICE #define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_NAND_SIMPLE #define CONFIG_SPL_MAX_FOOTPRINT (CONFIG_SYS_TEXT_BASE - \ diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h index d480990..7ee0e0b 100644 --- a/include/configs/xilinx_zynqmp.h +++ b/include/configs/xilinx_zynqmp.h @@ -261,7 +261,6 @@ #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_BOARD_INIT -#define CONFIG_SPL_RAM_DEVICE /* u-boot is like dtb */ #define CONFIG_SPL_FS_LOAD_ARGS_NAME "u-boot.bin" diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index 953e731..e04be5c 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -296,7 +296,6 @@ #define CONFIG_CMD_SPL #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_BOARD_INIT -#define CONFIG_SPL_RAM_DEVICE #define CONFIG_SPL_LDSCRIPT "arch/arm/mach-zynq/u-boot-spl.lds" -- 2.10.2

2 3

[U-Boot] Problem: the build does not recurse into subdirectory
by Maxim Sloyko 20 Dec '16

20 Dec '16

Greetings, I'm working on adding new platform to U-Boot and right now I'm trying to clean up the directory structure, but running into a problem of Make not recursing into a subdirectory that I've created. in my arch/arm/mach-aspeed/Makefile I have this: obj-$(CONFIG_ASPEED_AST2500) += ast2500/ ast2500-board.o and then in arch/arm/mach-aspeed/ast2500/Makefile: $obj-y += clk_ast2500.o sdram_ast2500.o When I try to build everything, I get this error: arm-linux-gnueabi-ld.bfd: cannot find arch/arm/mach-aspeed/ast2500/built-in.o: No such file or directory If instead in arch/arm/mach-aspeed/Makefile I specify: obj-$(CONFIG_ASPEED_AST2500) += ast2500/clk_ast2500.o ast2500/sdram_ast2500.o ast2500-board.o (That is, I just added binaries from the lower level dir explicitly) everything builds fine, which means that CONFIG_ASPEED_AST2500 is defined. Any ideas what might be the problem here? If you need more details, you can see the code here https://github.com/maksymko/u-boot/tree/aspeed_ast2500_evb/arch/arm/mach-as… Many thanks for the help! -- Maxim Sloyko

2 3

[U-Boot] [RESEND PATCH v2] powerpc: Retain compatible property for L2 cache
by Chris Packham 20 Dec '16

20 Dec '16

When setting the compatible property for the L2 cache ensure that we follow the documented binding by setting both "<chip>-l2-cache-controller" and "cache" as values. Signed-off-by: Chris Packham <judge.packham(a)gmail.com> --- Changes in v2: - extract a helper function to set the compatible property and use it in both the CONFIG_L2_CACHE and CONFIG_BACKSIDE_L2_CACHE cases. arch/powerpc/cpu/mpc85xx/fdt.c | 61 +++++++++++++++++++++++++----------------- 1 file changed, 36 insertions(+), 25 deletions(-) diff --git a/arch/powerpc/cpu/mpc85xx/fdt.c b/arch/powerpc/cpu/mpc85xx/fdt.c index 12001f85e9fd..67140ba9ee18 100644 --- a/arch/powerpc/cpu/mpc85xx/fdt.c +++ b/arch/powerpc/cpu/mpc85xx/fdt.c @@ -180,6 +180,39 @@ static inline void ft_fixup_l3cache(void *blob, int off) #define ft_fixup_l3cache(x, y) #endif +#if defined(CONFIG_L2_CACHE) || \ + defined(CONFIG_BACKSIDE_L2_CACHE) || \ + defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2) +static inline void ft_fixup_l2cache_compatible(void *blob, int off) +{ + int len; + struct cpu_type *cpu = identify_cpu(SVR_SOC_VER(get_svr())); + + if (cpu) { + char buf[40]; + + if (isdigit(cpu->name[0])) { + /* MPCxxxx, where xxxx == 4-digit number */ + len = sprintf(buf, "fsl,mpc%s-l2-cache-controller", + cpu->name) + 1; + } else { + /* Pxxxx or Txxxx, where xxxx == 4-digit number */ + len = sprintf(buf, "fsl,%c%s-l2-cache-controller", + tolower(cpu->name[0]), cpu->name + 1) + 1; + } + + /* + * append "cache" after the NULL character that the previous + * sprintf wrote. This is how a device tree stores multiple + * strings in a property. + */ + len += sprintf(buf + len, "cache") + 1; + + fdt_setprop(blob, off, "compatible", buf, len); + } +} +#endif + #if defined(CONFIG_L2_CACHE) /* return size in kilobytes */ static inline u32 l2cache_size(void) @@ -215,9 +248,8 @@ static inline u32 l2cache_size(void) static inline void ft_fixup_l2cache(void *blob) { - int len, off; + int off; u32 *ph; - struct cpu_type *cpu = identify_cpu(SVR_SOC_VER(get_svr())); const u32 line_size = 32; const u32 num_ways = 8; @@ -243,28 +275,7 @@ static inline void ft_fixup_l2cache(void *blob) return ; } - if (cpu) { - char buf[40]; - - if (isdigit(cpu->name[0])) { - /* MPCxxxx, where xxxx == 4-digit number */ - len = sprintf(buf, "fsl,mpc%s-l2-cache-controller", - cpu->name) + 1; - } else { - /* Pxxxx or Txxxx, where xxxx == 4-digit number */ - len = sprintf(buf, "fsl,%c%s-l2-cache-controller", - tolower(cpu->name[0]), cpu->name + 1) + 1; - } - - /* - * append "cache" after the NULL character that the previous - * sprintf wrote. This is how a device tree stores multiple - * strings in a property. - */ - len += sprintf(buf + len, "cache") + 1; - - fdt_setprop(blob, off, "compatible", buf, len); - } + ft_fixup_l2cache_compatible(blob, off); fdt_setprop(blob, off, "cache-unified", NULL, 0); fdt_setprop_cell(blob, off, "cache-block-size", line_size); fdt_setprop_cell(blob, off, "cache-size", size); @@ -337,7 +348,7 @@ static inline void ft_fixup_l2cache(void *blob) fdt_setprop_cell(blob, l2_off, "cache-size", size); fdt_setprop_cell(blob, l2_off, "cache-sets", num_sets); fdt_setprop_cell(blob, l2_off, "cache-level", 2); - fdt_setprop(blob, l2_off, "compatible", "cache", 6); + ft_fixup_l2cache_compatible(blob, l2_off); } if (l3_off < 0) { -- 2.11.0.24.ge6920cf

2 2

[U-Boot] [PATCH 1/4] ARM: zynq: Remove CONFIG_BOOTP_SERVERIP
by Michal Simek 20 Dec '16

20 Dec '16

Do the same change which was done in ZynqMP by: "ARM64: zynqmp: Remove CONFIG_BOOTP_SERVERIP" (sha1: a8b6a156c0f7fb99502229e454bc9c3b38645280) Signed-off-by: Michal Simek <michal.simek(a)xilinx.com> --- include/configs/zynq-common.h | 1 - 1 file changed, 1 deletion(-) diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index 57176f9c0619..6adb4e74745f 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -43,7 +43,6 @@ # define CONFIG_PHY_MARVELL # define CONFIG_PHY_REALTEK # define CONFIG_PHY_XILINX -# define CONFIG_BOOTP_SERVERIP # define CONFIG_BOOTP_BOOTPATH # define CONFIG_BOOTP_GATEWAY # define CONFIG_BOOTP_HOSTNAME -- 1.9.1

3 8

[U-Boot] [PATCH v3 0/3] Add generic FDT memory bank decoding and gd initialization
by Nathan Rossi 20 Dec '16

20 Dec '16

Currently most boards that have static memory config (which cannot be detected automatically) use CONFIG_SYS_SDRAM_SIZE to define the size of memory which is hard coded into U-Boot. With the addition of device tree support into U-Boot, boards that have device tree data can instead query the memory bank information from the embedded or appended device tree. This allows for more dynamic memory configuration and avoids the need to hard code memory configuration into U-Boot. The first patch of this series adds two helper functions for handling the memory bank decoding and initialization of global data which can be used by boards in their dram_init and dram_init_banksize functions. The purpose of these helper functions is to provide generic functions that handle the decoding and setup of memory and memory banks for boards that intend to use this mechanism. The series also changes the zynq and zynqmp board implementations to use these functions to resolve a issue with static variable use. Changes in v2: * Make fdtdec_setup_memory_banksize() return value consistent * Add more detail into the function documentation Changes in v3: * Wrap the fdtdec_setup_memory_banksize() function with an #if on CONFIG_NR_DRAM_BANKS, so that the function is only available for configs that have memory banks available in bd_t. Nathan Rossi (3): fdt: add memory bank decoding functions for board setup ARM: zynq: Replace board specific with generic memory bank decoding ARM64: zynqmp: Replace board specific with generic memory bank decoding board/xilinx/zynq/board.c | 112 ++----------------------------------------- board/xilinx/zynqmp/zynqmp.c | 112 ++----------------------------------------- include/fdtdec.h | 34 +++++++++++++ lib/fdtdec.c | 56 ++++++++++++++++++++++ 4 files changed, 96 insertions(+), 218 deletions(-) -- 2.11.0

2 4

[U-Boot] [ANN] U-Boot v2017.01-rc2 released
by Tom Rini 19 Dec '16

19 Dec '16

Hey all, It's release day and v2017.01-rc2 is out. I've tried to clean up my queue a bit and I think it's looking OK. I also know that there's a few things others have outstanding that I'm inclined to let come in such as binman. If anyone thinks that's a bad idea, please shout. I think things are looking good and I plan to grab some Kconfig changes next and verify the (lack of) size changes. Things are on track for -rc3 on January 2nd. Thanks all! -- Tom

1 0

[U-Boot] [PATCH V2] tools: mxsimage: Fix build with OpenSSL 1.1.x
by Marek Vasut 19 Dec '16

19 Dec '16

The EVP_MD_CTX and EVP_CIPHER_CTX are made opaque since 1.1.x , so instead of embedding them directly into struct sb_image_ctx and initializing them using EVP_*_CTX_init(), we use pointers and allocate the crypto contexts using EVP_*_CTX_new(). Signed-off-by: Marek Vasut <marex(a)denx.de> Cc: Tom Rini <trini(a)konsulko.com> --- V2: Fix build with older versions of OpenSSL than 1.1.0 --- tools/mxsimage.c | 104 +++++++++++++++++++++++++++++++++++++------------------ 1 file changed, 70 insertions(+), 34 deletions(-) diff --git a/tools/mxsimage.c b/tools/mxsimage.c index 98fc644..32a7978 100644 --- a/tools/mxsimage.c +++ b/tools/mxsimage.c @@ -22,6 +22,36 @@ #include "pbl_crc32.h" #include <image.h> +/* + * OpenSSL 1.1.0 and newer compatibility functions: + * https://wiki.openssl.org/index.php/1.1_API_Changes + */ +#if OPENSSL_VERSION_NUMBER < 0x10100000L +static void *OPENSSL_zalloc(size_t num) +{ + void *ret = OPENSSL_malloc(num); + + if (ret != NULL) + memset(ret, 0, num); + return ret; +} + +EVP_MD_CTX *EVP_MD_CTX_new(void) +{ + return OPENSSL_zalloc(sizeof(EVP_MD_CTX)); +} + +void EVP_MD_CTX_free(EVP_MD_CTX *ctx) +{ + EVP_MD_CTX_cleanup(ctx); + OPENSSL_free(ctx); +} + +int EVP_CIPHER_CTX_reset(EVP_CIPHER_CTX *ctx) +{ + return EVP_CIPHER_CTX_cleanup(ctx); +} +#endif /* * DCD block @@ -144,8 +174,8 @@ struct sb_image_ctx { struct sb_dcd_ctx *dcd_head; struct sb_dcd_ctx *dcd_tail; - EVP_CIPHER_CTX cipher_ctx; - EVP_MD_CTX md_ctx; + EVP_CIPHER_CTX *cipher_ctx; + EVP_MD_CTX *md_ctx; uint8_t digest[32]; struct sb_key_dictionary_key sb_dict_key; @@ -173,24 +203,26 @@ struct sb_image_ctx { */ static int sb_aes_init(struct sb_image_ctx *ictx, uint8_t *iv, int enc) { - EVP_CIPHER_CTX *ctx = &ictx->cipher_ctx; + EVP_CIPHER_CTX *ctx; int ret; /* If there is no init vector, init vector is all zeroes. */ if (!iv) iv = ictx->image_key; - EVP_CIPHER_CTX_init(ctx); + ctx = EVP_CIPHER_CTX_new(); ret = EVP_CipherInit(ctx, EVP_aes_128_cbc(), ictx->image_key, iv, enc); - if (ret == 1) + if (ret == 1) { EVP_CIPHER_CTX_set_padding(ctx, 0); + ictx->cipher_ctx = ctx; + } return ret; } static int sb_aes_crypt(struct sb_image_ctx *ictx, uint8_t *in_data, uint8_t *out_data, int in_len) { - EVP_CIPHER_CTX *ctx = &ictx->cipher_ctx; + EVP_CIPHER_CTX *ctx = ictx->cipher_ctx; int ret, outlen; uint8_t *outbuf; @@ -215,13 +247,13 @@ err: static int sb_aes_deinit(EVP_CIPHER_CTX *ctx) { - return EVP_CIPHER_CTX_cleanup(ctx); + return EVP_CIPHER_CTX_reset(ctx); } static int sb_aes_reinit(struct sb_image_ctx *ictx, int enc) { int ret; - EVP_CIPHER_CTX *ctx = &ictx->cipher_ctx; + EVP_CIPHER_CTX *ctx = ictx->cipher_ctx; struct sb_boot_image_header *sb_header = &ictx->payload; uint8_t *iv = sb_header->iv; @@ -276,7 +308,7 @@ static int sb_get_time(time_t time, struct tm *tm) static void sb_encrypt_sb_header(struct sb_image_ctx *ictx) { - EVP_MD_CTX *md_ctx = &ictx->md_ctx; + EVP_MD_CTX *md_ctx = ictx->md_ctx; struct sb_boot_image_header *sb_header = &ictx->payload; uint8_t *sb_header_ptr = (uint8_t *)sb_header; @@ -287,7 +319,7 @@ static void sb_encrypt_sb_header(struct sb_image_ctx *ictx) static void sb_encrypt_sb_sections_header(struct sb_image_ctx *ictx) { - EVP_MD_CTX *md_ctx = &ictx->md_ctx; + EVP_MD_CTX *md_ctx = ictx->md_ctx; struct sb_section_ctx *sctx = ictx->sect_head; struct sb_sections_header *shdr; uint8_t *sb_sections_header_ptr; @@ -307,7 +339,7 @@ static void sb_encrypt_sb_sections_header(struct sb_image_ctx *ictx) static void sb_encrypt_key_dictionary_key(struct sb_image_ctx *ictx) { - EVP_MD_CTX *md_ctx = &ictx->md_ctx; + EVP_MD_CTX *md_ctx = ictx->md_ctx; sb_aes_crypt(ictx, ictx->image_key, ictx->sb_dict_key.key, sizeof(ictx->sb_dict_key.key)); @@ -316,7 +348,7 @@ static void sb_encrypt_key_dictionary_key(struct sb_image_ctx *ictx) static void sb_decrypt_key_dictionary_key(struct sb_image_ctx *ictx) { - EVP_MD_CTX *md_ctx = &ictx->md_ctx; + EVP_MD_CTX *md_ctx = ictx->md_ctx; EVP_DigestUpdate(md_ctx, &ictx->sb_dict_key, sizeof(ictx->sb_dict_key)); sb_aes_crypt(ictx, ictx->sb_dict_key.key, ictx->image_key, @@ -326,7 +358,7 @@ static void sb_decrypt_key_dictionary_key(struct sb_image_ctx *ictx) static void sb_encrypt_tag(struct sb_image_ctx *ictx, struct sb_cmd_ctx *cctx) { - EVP_MD_CTX *md_ctx = &ictx->md_ctx; + EVP_MD_CTX *md_ctx = ictx->md_ctx; struct sb_command *cmd = &cctx->payload; sb_aes_crypt(ictx, (uint8_t *)cmd, @@ -337,8 +369,8 @@ static void sb_encrypt_tag(struct sb_image_ctx *ictx, static int sb_encrypt_image(struct sb_image_ctx *ictx) { /* Start image-wide crypto. */ - EVP_MD_CTX_init(&ictx->md_ctx); - EVP_DigestInit(&ictx->md_ctx, EVP_sha1()); + ictx->md_ctx = EVP_MD_CTX_new(); + EVP_DigestInit(ictx->md_ctx, EVP_sha1()); /* * SB image header. @@ -379,7 +411,7 @@ static int sb_encrypt_image(struct sb_image_ctx *ictx) } else if (ccmd->header.tag == ROM_LOAD_CMD) { sb_aes_crypt(ictx, cctx->data, cctx->data, cctx->length); - EVP_DigestUpdate(&ictx->md_ctx, cctx->data, + EVP_DigestUpdate(ictx->md_ctx, cctx->data, cctx->length); } @@ -394,11 +426,12 @@ static int sb_encrypt_image(struct sb_image_ctx *ictx) */ sb_aes_reinit(ictx, 1); - EVP_DigestFinal(&ictx->md_ctx, ictx->digest, NULL); + EVP_DigestFinal(ictx->md_ctx, ictx->digest, NULL); + EVP_MD_CTX_free(ictx->md_ctx); sb_aes_crypt(ictx, ictx->digest, ictx->digest, sizeof(ictx->digest)); /* Stop the encryption session. */ - sb_aes_deinit(&ictx->cipher_ctx); + sb_aes_deinit(ictx->cipher_ctx); return 0; } @@ -1322,7 +1355,7 @@ static int sb_postfill_image_header(struct sb_image_ctx *ictx) struct sb_boot_image_header *hdr = &ictx->payload; struct sb_section_ctx *sctx = ictx->sect_head; uint32_t kd_size, sections_blocks; - EVP_MD_CTX md_ctx; + EVP_MD_CTX *md_ctx; /* The main SB header size in blocks. */ hdr->image_blocks = hdr->header_blocks; @@ -1359,13 +1392,14 @@ static int sb_postfill_image_header(struct sb_image_ctx *ictx) hdr->key_dictionary_block + kd_size / SB_BLOCK_SIZE; /* Compute header digest. */ - EVP_MD_CTX_init(&md_ctx); + md_ctx = EVP_MD_CTX_new(); - EVP_DigestInit(&md_ctx, EVP_sha1()); - EVP_DigestUpdate(&md_ctx, hdr->signature1, + EVP_DigestInit(md_ctx, EVP_sha1()); + EVP_DigestUpdate(md_ctx, hdr->signature1, sizeof(struct sb_boot_image_header) - sizeof(hdr->digest)); - EVP_DigestFinal(&md_ctx, hdr->digest, NULL); + EVP_DigestFinal(md_ctx, hdr->digest, NULL); + EVP_MD_CTX_free(md_ctx); return 0; } @@ -1621,12 +1655,12 @@ static int sb_verify_image_header(struct sb_image_ctx *ictx, struct tm tm; int sz, ret = 0; unsigned char digest[20]; - EVP_MD_CTX md_ctx; + EVP_MD_CTX *md_ctx; unsigned long size; /* Start image-wide crypto. */ - EVP_MD_CTX_init(&ictx->md_ctx); - EVP_DigestInit(&ictx->md_ctx, EVP_sha1()); + ictx->md_ctx = EVP_MD_CTX_new(); + EVP_DigestInit(ictx->md_ctx, EVP_sha1()); soprintf(ictx, "---------- Verifying SB Image Header ----------\n"); @@ -1637,12 +1671,13 @@ static int sb_verify_image_header(struct sb_image_ctx *ictx, } /* Compute header digest. */ - EVP_MD_CTX_init(&md_ctx); - EVP_DigestInit(&md_ctx, EVP_sha1()); - EVP_DigestUpdate(&md_ctx, hdr->signature1, + md_ctx = EVP_MD_CTX_new(); + EVP_DigestInit(md_ctx, EVP_sha1()); + EVP_DigestUpdate(md_ctx, hdr->signature1, sizeof(struct sb_boot_image_header) - sizeof(hdr->digest)); - EVP_DigestFinal(&md_ctx, digest, NULL); + EVP_DigestFinal(md_ctx, digest, NULL); + EVP_MD_CTX_free(md_ctx); sb_aes_init(ictx, NULL, 1); sb_encrypt_sb_header(ictx); @@ -1761,7 +1796,7 @@ static int sb_verify_image_header(struct sb_image_ctx *ictx, static void sb_decrypt_tag(struct sb_image_ctx *ictx, struct sb_cmd_ctx *cctx) { - EVP_MD_CTX *md_ctx = &ictx->md_ctx; + EVP_MD_CTX *md_ctx = ictx->md_ctx; struct sb_command *cmd = &cctx->payload; sb_aes_crypt(ictx, (uint8_t *)&cctx->c_payload, @@ -1818,7 +1853,7 @@ static int sb_verify_command(struct sb_image_ctx *ictx, *tsize += size; - EVP_DigestUpdate(&ictx->md_ctx, cctx->data, asize); + EVP_DigestUpdate(ictx->md_ctx, cctx->data, asize); sb_aes_crypt(ictx, cctx->data, cctx->data, asize); if (ccmd->load.crc32 != pbl_crc32(0, @@ -2007,7 +2042,8 @@ static int sb_verify_image_end(struct sb_image_ctx *ictx, } /* Check the image digest. */ - EVP_DigestFinal(&ictx->md_ctx, ictx->digest, NULL); + EVP_DigestFinal(ictx->md_ctx, ictx->digest, NULL); + EVP_MD_CTX_free(ictx->md_ctx); /* Decrypt the image digest from the input image. */ sb_aes_reinit(ictx, 0); @@ -2083,7 +2119,7 @@ err_verify: soprintf(ictx, "Verification %s\n", ret ? "FAILED" : "PASSED"); /* Stop the encryption session. */ - sb_aes_deinit(&ictx->cipher_ctx); + sb_aes_deinit(ictx->cipher_ctx); fclose(fp); return ret; -- 2.10.2

2 1

[U-Boot] [PATCH] ARM: mxs: Remove unused variable warning
by Marek Vasut 19 Dec '16

19 Dec '16

Shuffle the macros around a little to remove the following warning when building for i.MX28: arch/arm/cpu/arm926ejs/mxs/spl_boot.c:44:26: warning: ‘iomux_boot’ defined but not used [-Wunused-const-variable=] static const iomux_cfg_t iomux_boot[] = { ^~~~~~~~~~ Signed-off-by: Marek Vasut <marex(a)denx.de> Cc: Tom Rini <trini(a)konsulko.com> Cc: Stefano Babic <sbabic(a)denx.de> --- arch/arm/cpu/arm926ejs/mxs/spl_boot.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_boot.c b/arch/arm/cpu/arm926ejs/mxs/spl_boot.c index eb8669b..d9d1d73 100644 --- a/arch/arm/cpu/arm926ejs/mxs/spl_boot.c +++ b/arch/arm/cpu/arm926ejs/mxs/spl_boot.c @@ -40,17 +40,17 @@ void early_delay(int delay) ; } +#if defined(CONFIG_MX23) #define MUX_CONFIG_BOOTMODE_PAD (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL) static const iomux_cfg_t iomux_boot[] = { -#if defined(CONFIG_MX23) MX23_PAD_LCD_D00__GPIO_1_0 | MUX_CONFIG_BOOTMODE_PAD, MX23_PAD_LCD_D01__GPIO_1_1 | MUX_CONFIG_BOOTMODE_PAD, MX23_PAD_LCD_D02__GPIO_1_2 | MUX_CONFIG_BOOTMODE_PAD, MX23_PAD_LCD_D03__GPIO_1_3 | MUX_CONFIG_BOOTMODE_PAD, MX23_PAD_LCD_D04__GPIO_1_4 | MUX_CONFIG_BOOTMODE_PAD, MX23_PAD_LCD_D05__GPIO_1_5 | MUX_CONFIG_BOOTMODE_PAD, -#endif }; +#endif static uint8_t mxs_get_bootmode_index(void) { -- 2.10.2

2 1

[U-Boot] [PULL] Please pull u-boot-imx
by Stefano Babic 19 Dec '16

19 Dec '16

Hi Tom, please pull from u-boot-imx, thanks ! The following changes since commit 53e8ca22538c2cec691fe74098684a359302688c: MAINTAINERS: DFU: Change e-mail address for DFU maintainer (2016-12-12 13:03:15 -0500) are available in the git repository at: git://www.denx.de/git/u-boot-imx.git master for you to fetch changes up to 854bb75be98ad792ff64c26ae38a1392ea185cd6: imx6: icorem6_rqs: Add FEC support (2016-12-16 18:39:06 +0100) ---------------------------------------------------------------- Breno Lima (10): Revert "ARM: mx6: add MMC2 boot device detection support in SPL" udoo_neo: Remove USDHC3 support udoo_neo: Move MX6SX configuration to Kconfig udoo_neo: Staticize board_string() udoo_neo: Remove mmcautodetect option udoo_neo: Remove console option udoo_neo: Add thermal support power: pmic: Add Voltage configuration macro udoo_neo: Add PFUZE300 PMIC support udoo_neo: Add Ethernet support Jagan Teki (29): net: fec_mxc: Remove unneeded eth_device arg from fec_get_hwaddr net: fec_mxc: Convert into driver model net: fec_mxc: Driver cleanups dm: net: fec: Add .read_rom_hwaddr ARM: dts: imx6qdl-icore: Add FEC support icorem6: Use CONFIG_DM_ETH support video: Kconfig: Add VIDEO_IPV3 entry imx6: icorem6: Add framebuffer support imx6: icorem6: Add custom splashscreen support i2c: Kconfig: Add SYS_I2C_MXC entry i2c: mxc: Print hex instead of decimal for bus address i2c: mxc: Make 'no gpio pinctrl state' print as debug imx6: icorem6: Add I2C support arm: dts: Add devicetree for i.MX6UL arm: imx6ul: Add Engicam GEAM6UL Starter Kit initial support arm: dts: imx6ul-geam: Add I2C nodes imx6: geam6ul: Add I2C support imx6: geam6ul: Add NAND support imx6: geam6ul: Enable MTD device support imx6: geam6ul: Add default mtd nand partition table arm: imx6q: Add Engicam i.CoreM6 Quad/Dual RQS Starter Kit initial support arm: imx6q: Add Engicam i.CoreM6 Solo/Duallite RQS Starter Kit initial support imx6: icorem6: Rename engicam icorem6 defconfig files arm: dts: imx6qdl-icore-rqs: Add I2C node's imx6: icorem6_rqs: Add I2C support arm: dts: imx6ul-geam: Add FEC node imx6: geam6ul: Add FEC support arm: dts: imx6qdl-icore-rqs: Add FEC node imx6: icorem6_rqs: Add FEC support Marcin Niestroj (2): ARM: imx6ul: Add support for liteSOM board/liteboard: Add support for liteBoard Max Krummenacher (2): arm: imx: initial support for apalis imx6 arm: imx: initial support for colibri imx6 Patrick Bruenn (1): arm: imx: add i.MX53 Beckhoff CX9020 Embedded PC Peng Fan (19): imx: add i.MX 6SLL CPU type imx: mx6sll: add pinmux header files imx: mx6sll: update register address imx-common: timer: add i.MX6SLL support imx: mx6sll: add iomux settings imx: mx6: fix mmdc ch0 clk for 6SL imx: mx6: lcdif: gate clock before changing mux imx: mx6sl: add lcdif clock support imx: clock: gate clk before changing pix clk mux imx: mx6sll: add clock support imx-common: cache: configure L2 Cache for i.MX6SLL imx: mx6sll: add Kconfig entry for i.MX6SLL mx6_common: correct loadaddr and text base for i.MX6SLL OCOTP: Update OCOTP driver to support i.MX6SLL imx-common: lcdif: update lcdif regs for i.MX6SL/SLL pinctrl: imx6: support i.MX6SLL arm: dts: add i.MX6SLL device tree arm: imx: add i.MX6SLL EVK board support imx: mx6sllevk: add plugin support Sanchayan Maity (1): configs: colibri_vf: Add fdt_fixup environment variable Stefan Agner (6): toradex: fix USB Download gadget fixup callback toradex: allow custom fdt board setup in board file colibri_vf: use device-tree for MTD partitions colibri_vf: cleanup USB clock initialization colibri_vf: use same NAND clock as Linux uses ARM: dts: vf: Fix warning about missing reg property Stefano Babic (1): Merge branch 'master' of git://git.denx.de/u-boot arch/arm/Kconfig | 2 + arch/arm/Makefile | 1 + arch/arm/cpu/armv7/mx5/Kconfig | 8 + arch/arm/cpu/armv7/mx6/Kconfig | 63 ++ arch/arm/cpu/armv7/mx6/clock.c | 143 ++- arch/arm/dts/Makefile | 8 +- arch/arm/dts/imx53-cx9020.dts | 190 ++++ arch/arm/dts/imx53-pinfunc.h | 1189 +++++++++++++++++++++++ arch/arm/dts/imx53.dtsi | 110 +++ arch/arm/dts/imx6dl-icore-rqs.dts | 50 + arch/arm/dts/imx6q-icore-rqs.dts | 50 + arch/arm/dts/imx6qdl-icore-rqs.dtsi | 170 ++++ arch/arm/dts/imx6qdl-icore.dtsi | 24 + arch/arm/dts/imx6sll-evk.dts | 801 +++++++++++++++ arch/arm/dts/imx6sll-pinfunc.h | 882 +++++++++++++++++ arch/arm/dts/imx6sll.dtsi | 859 ++++++++++++++++ arch/arm/dts/imx6ul-geam-kit.dts | 168 ++++ arch/arm/dts/imx6ul.dtsi | 942 ++++++++++++++++++ arch/arm/dts/vf.dtsi | 2 + arch/arm/imx-common/cache.c | 17 +- arch/arm/imx-common/cpu.c | 2 + arch/arm/imx-common/iomux-v3.c | 10 +- arch/arm/imx-common/spl.c | 6 +- arch/arm/imx-common/timer.c | 10 +- arch/arm/include/asm/arch-imx/cpu.h | 3 +- arch/arm/include/asm/arch-mx6/clock.h | 2 +- arch/arm/include/asm/arch-mx6/crm_regs.h | 21 + arch/arm/include/asm/arch-mx6/imx-regs.h | 77 +- arch/arm/include/asm/arch-mx6/mx6-pins.h | 2 + arch/arm/include/asm/arch-mx6/mx6sll_pins.h | 1019 +++++++++++++++++++ arch/arm/include/asm/imx-common/iomux-v3.h | 6 +- arch/arm/include/asm/imx-common/regs-lcdif.h | 7 +- arch/arm/include/asm/imx-common/sys_proto.h | 1 + arch/arm/mach-litesom/Kconfig | 6 + arch/arm/mach-litesom/Makefile | 6 + arch/arm/mach-litesom/include/mach/litesom.h | 16 + arch/arm/mach-litesom/litesom.c | 200 ++++ board/beckhoff/mx53cx9020/Kconfig | 12 + board/beckhoff/mx53cx9020/MAINTAINERS | 6 + board/beckhoff/mx53cx9020/Makefile | 9 + board/beckhoff/mx53cx9020/imximage.cfg | 82 ++ board/beckhoff/mx53cx9020/mx53cx9020.c | 367 +++++++ board/beckhoff/mx53cx9020/mx53cx9020_video.c | 49 + board/engicam/geam6ul/Kconfig | 12 + board/engicam/geam6ul/MAINTAINERS | 6 + board/engicam/geam6ul/Makefile | 6 + board/engicam/geam6ul/README | 28 + board/engicam/geam6ul/geam6ul.c | 317 ++++++ board/engicam/icorem6/MAINTAINERS | 6 +- board/engicam/icorem6/README | 19 +- board/engicam/icorem6/icorem6.c | 184 ++-- board/engicam/icorem6_rqs/Kconfig | 12 + board/engicam/icorem6_rqs/MAINTAINERS | 7 + board/engicam/icorem6_rqs/Makefile | 6 + board/engicam/icorem6_rqs/README | 33 + board/engicam/icorem6_rqs/icorem6_rqs.c | 399 ++++++++ board/freescale/mx6sllevk/Kconfig | 12 + board/freescale/mx6sllevk/Makefile | 6 + board/freescale/mx6sllevk/imximage.cfg | 127 +++ board/freescale/mx6sllevk/mx6sllevk.c | 131 +++ board/freescale/mx6sllevk/plugin.S | 155 +++ board/freescale/mx6sxsabresd/mx6sxsabresd.c | 2 +- board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c | 2 +- board/grinn/liteboard/Kconfig | 12 + board/grinn/liteboard/MAINTAINERS | 6 + board/grinn/liteboard/Makefile | 6 + board/grinn/liteboard/README | 31 + board/grinn/liteboard/board.c | 287 ++++++ board/toradex/apalis_imx6/1066mhz_4x128mx16.cfg | 48 + board/toradex/apalis_imx6/1066mhz_4x256mx16.cfg | 48 + board/toradex/apalis_imx6/Kconfig | 55 ++ board/toradex/apalis_imx6/MAINTAINERS | 9 + board/toradex/apalis_imx6/Makefile | 5 + board/toradex/apalis_imx6/apalis_imx6.c | 1292 +++++++++++++++++++++++++ board/toradex/apalis_imx6/apalis_imx6q.cfg | 34 + board/toradex/apalis_imx6/clocks.cfg | 42 + board/toradex/apalis_imx6/ddr-setup.cfg | 97 ++ board/toradex/apalis_imx6/do_fuse.c | 98 ++ board/toradex/apalis_imx6/pf0100.c | 228 +++++ board/toradex/apalis_imx6/pf0100.h | 56 ++ board/toradex/apalis_imx6/pf0100_otp.inc | 191 ++++ board/toradex/apalis_t30/apalis_t30.c | 8 + board/toradex/colibri_imx6/800mhz_2x64mx16.cfg | 59 ++ board/toradex/colibri_imx6/800mhz_4x64mx16.cfg | 59 ++ board/toradex/colibri_imx6/Kconfig | 44 + board/toradex/colibri_imx6/MAINTAINERS | 8 + board/toradex/colibri_imx6/Makefile | 5 + board/toradex/colibri_imx6/clocks.cfg | 42 + board/toradex/colibri_imx6/colibri_imx6.c | 1130 +++++++++++++++++++++ board/toradex/colibri_imx6/colibri_imx6.cfg | 38 + board/toradex/colibri_imx6/ddr-setup.cfg | 98 ++ board/toradex/colibri_imx6/do_fuse.c | 98 ++ board/toradex/colibri_imx6/pf0100.c | 211 ++++ board/toradex/colibri_imx6/pf0100.h | 56 ++ board/toradex/colibri_imx6/pf0100_otp.inc | 189 ++++ board/toradex/colibri_imx7/colibri_imx7.c | 8 + board/toradex/colibri_pxa270/colibri_pxa270.c | 8 + board/toradex/colibri_t20/colibri_t20.c | 8 + board/toradex/colibri_t30/colibri_t30.c | 8 + board/toradex/colibri_vf/colibri_vf.c | 37 +- board/toradex/common/tdx-common.c | 12 +- board/toradex/common/tdx-common.h | 2 + board/udoo/neo/neo.c | 334 +++++-- configs/apalis_imx6_defconfig | 52 + configs/apalis_imx6_nospl_com_defconfig | 42 + configs/apalis_imx6_nospl_it_defconfig | 44 + configs/colibri_imx6_defconfig | 50 + configs/colibri_imx6_nospl_defconfig | 44 + ...x6qdl_icore_mmc_defconfig => imx6dl_icore_mmc_defconfig} | 7 +- ...qdl_icore_nand_defconfig => imx6dl_icore_nand_defconfig} | 7 +- configs/imx6dl_icore_rqs_mmc_defconfig | 43 + configs/imx6q_icore_mmc_defconfig | 47 + configs/imx6q_icore_nand_defconfig | 42 + configs/imx6q_icore_rqs_mmc_defconfig | 43 + configs/imx6ul_geam_mmc_defconfig | 44 + configs/imx6ul_geam_nand_defconfig | 37 + configs/liteboard_defconfig | 29 + configs/mx53cx9020_defconfig | 35 + configs/mx6sllevk_defconfig | 36 + configs/mx6sllevk_plugin_defconfig | 37 + configs/udoo_neo_defconfig | 4 +- drivers/fpga/Kconfig | 20 + drivers/i2c/Kconfig | 8 + drivers/i2c/mxc_i2c.c | 2 +- drivers/misc/mxc_ocotp.c | 16 +- drivers/net/Kconfig | 2 +- drivers/net/fec_mxc.c | 473 ++++++--- drivers/net/fec_mxc.h | 31 +- drivers/pinctrl/nxp/Kconfig | 14 + drivers/pinctrl/nxp/Makefile | 1 + drivers/pinctrl/nxp/pinctrl-imx5.c | 44 + drivers/pinctrl/nxp/pinctrl-imx6.c | 2 + drivers/serial/Kconfig | 2 +- drivers/video/Kconfig | 7 + include/configs/apalis_imx6.h | 342 +++++++ include/configs/colibri_imx6.h | 310 ++++++ include/configs/colibri_vf.h | 7 +- include/configs/imx6qdl_icore.h | 14 + include/configs/imx6qdl_icore_rqs.h | 135 +++ include/configs/imx6ul_geam.h | 165 ++++ include/configs/liteboard.h | 171 ++++ include/configs/mx53cx9020.h | 198 ++++ include/configs/mx6_common.h | 3 +- include/configs/mx6sllevk.h | 152 +++ include/configs/udoo_neo.h | 35 +- include/dt-bindings/clock/imx5-clock.h | 219 +++++ include/dt-bindings/clock/imx6sll-clock.h | 204 ++++ include/dt-bindings/clock/imx6ul-clock.h | 1 + include/power/pfuze3000_pmic.h | 5 + tools/logos/engicam.bmp | Bin 0 -> 60214 bytes 150 files changed, 16828 insertions(+), 473 deletions(-) create mode 100644 arch/arm/dts/imx53-cx9020.dts create mode 100644 arch/arm/dts/imx53-pinfunc.h create mode 100644 arch/arm/dts/imx53.dtsi create mode 100644 arch/arm/dts/imx6dl-icore-rqs.dts create mode 100644 arch/arm/dts/imx6q-icore-rqs.dts create mode 100644 arch/arm/dts/imx6qdl-icore-rqs.dtsi create mode 100644 arch/arm/dts/imx6sll-evk.dts create mode 100644 arch/arm/dts/imx6sll-pinfunc.h create mode 100644 arch/arm/dts/imx6sll.dtsi create mode 100644 arch/arm/dts/imx6ul-geam-kit.dts create mode 100644 arch/arm/dts/imx6ul.dtsi create mode 100644 arch/arm/include/asm/arch-mx6/mx6sll_pins.h create mode 100644 arch/arm/mach-litesom/Kconfig create mode 100644 arch/arm/mach-litesom/Makefile create mode 100644 arch/arm/mach-litesom/include/mach/litesom.h create mode 100644 arch/arm/mach-litesom/litesom.c create mode 100644 board/beckhoff/mx53cx9020/Kconfig create mode 100644 board/beckhoff/mx53cx9020/MAINTAINERS create mode 100644 board/beckhoff/mx53cx9020/Makefile create mode 100644 board/beckhoff/mx53cx9020/imximage.cfg create mode 100644 board/beckhoff/mx53cx9020/mx53cx9020.c create mode 100644 board/beckhoff/mx53cx9020/mx53cx9020_video.c create mode 100644 board/engicam/geam6ul/Kconfig create mode 100644 board/engicam/geam6ul/MAINTAINERS create mode 100644 board/engicam/geam6ul/Makefile create mode 100644 board/engicam/geam6ul/README create mode 100644 board/engicam/geam6ul/geam6ul.c create mode 100644 board/engicam/icorem6_rqs/Kconfig create mode 100644 board/engicam/icorem6_rqs/MAINTAINERS create mode 100644 board/engicam/icorem6_rqs/Makefile create mode 100644 board/engicam/icorem6_rqs/README create mode 100644 board/engicam/icorem6_rqs/icorem6_rqs.c create mode 100644 board/freescale/mx6sllevk/Kconfig create mode 100644 board/freescale/mx6sllevk/Makefile create mode 100644 board/freescale/mx6sllevk/imximage.cfg create mode 100644 board/freescale/mx6sllevk/mx6sllevk.c create mode 100644 board/freescale/mx6sllevk/plugin.S create mode 100644 board/grinn/liteboard/Kconfig create mode 100644 board/grinn/liteboard/MAINTAINERS create mode 100644 board/grinn/liteboard/Makefile create mode 100644 board/grinn/liteboard/README create mode 100644 board/grinn/liteboard/board.c create mode 100644 board/toradex/apalis_imx6/1066mhz_4x128mx16.cfg create mode 100644 board/toradex/apalis_imx6/1066mhz_4x256mx16.cfg create mode 100644 board/toradex/apalis_imx6/Kconfig create mode 100644 board/toradex/apalis_imx6/MAINTAINERS create mode 100644 board/toradex/apalis_imx6/Makefile create mode 100644 board/toradex/apalis_imx6/apalis_imx6.c create mode 100644 board/toradex/apalis_imx6/apalis_imx6q.cfg create mode 100644 board/toradex/apalis_imx6/clocks.cfg create mode 100644 board/toradex/apalis_imx6/ddr-setup.cfg create mode 100644 board/toradex/apalis_imx6/do_fuse.c create mode 100644 board/toradex/apalis_imx6/pf0100.c create mode 100644 board/toradex/apalis_imx6/pf0100.h create mode 100644 board/toradex/apalis_imx6/pf0100_otp.inc create mode 100644 board/toradex/colibri_imx6/800mhz_2x64mx16.cfg create mode 100644 board/toradex/colibri_imx6/800mhz_4x64mx16.cfg create mode 100644 board/toradex/colibri_imx6/Kconfig create mode 100644 board/toradex/colibri_imx6/MAINTAINERS create mode 100644 board/toradex/colibri_imx6/Makefile create mode 100644 board/toradex/colibri_imx6/clocks.cfg create mode 100644 board/toradex/colibri_imx6/colibri_imx6.c create mode 100644 board/toradex/colibri_imx6/colibri_imx6.cfg create mode 100644 board/toradex/colibri_imx6/ddr-setup.cfg create mode 100644 board/toradex/colibri_imx6/do_fuse.c create mode 100644 board/toradex/colibri_imx6/pf0100.c create mode 100644 board/toradex/colibri_imx6/pf0100.h create mode 100644 board/toradex/colibri_imx6/pf0100_otp.inc create mode 100644 configs/apalis_imx6_defconfig create mode 100644 configs/apalis_imx6_nospl_com_defconfig create mode 100644 configs/apalis_imx6_nospl_it_defconfig create mode 100644 configs/colibri_imx6_defconfig create mode 100644 configs/colibri_imx6_nospl_defconfig rename configs/{imx6qdl_icore_mmc_defconfig => imx6dl_icore_mmc_defconfig} (90%) rename configs/{imx6qdl_icore_nand_defconfig => imx6dl_icore_nand_defconfig} (89%) create mode 100644 configs/imx6dl_icore_rqs_mmc_defconfig create mode 100644 configs/imx6q_icore_mmc_defconfig create mode 100644 configs/imx6q_icore_nand_defconfig create mode 100644 configs/imx6q_icore_rqs_mmc_defconfig create mode 100644 configs/imx6ul_geam_mmc_defconfig create mode 100644 configs/imx6ul_geam_nand_defconfig create mode 100644 configs/liteboard_defconfig create mode 100644 configs/mx53cx9020_defconfig create mode 100644 configs/mx6sllevk_defconfig create mode 100644 configs/mx6sllevk_plugin_defconfig create mode 100644 drivers/pinctrl/nxp/pinctrl-imx5.c create mode 100644 include/configs/apalis_imx6.h create mode 100644 include/configs/colibri_imx6.h create mode 100644 include/configs/imx6qdl_icore_rqs.h create mode 100644 include/configs/imx6ul_geam.h create mode 100644 include/configs/liteboard.h create mode 100644 include/configs/mx53cx9020.h create mode 100644 include/configs/mx6sllevk.h create mode 100644 include/dt-bindings/clock/imx5-clock.h create mode 100644 include/dt-bindings/clock/imx6sll-clock.h create mode 100755 tools/logos/engicam.bmp -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic(a)denx.de =====================================================================

2 1