September 2015 - U-Boot

[U-Boot] [PATCH 0/6] ARM: sunxi: Introduce CHIP support
by Maxime Ripard 22 Sep '15

22 Sep '15

Hi, Here is a serie introducing the support for the Allwinner R8 and the Nextthing's CHIP. The only missing parts for now are the display on the composite output and the NAND support that will come in due time. Everything else should work just fine, including the USB gadget and host support. Let me know what you think, Maxime Maxime Ripard (6): sunxi: Add an option to disable MMC fastboot: Implement OEM format only when we have MMC support sunxi: Add the R8 DTSI ARM: sun5i: dt: Move uart3 pinctrl node to common DTSI ARM: sun5i: dt: Add UART3 CTS and RTS pins sunxi: Add CHIP support arch/arm/cpu/armv7/sunxi/board.c | 6 + arch/arm/dts/Makefile | 3 +- arch/arm/dts/sun5i-a10s.dtsi | 7 -- arch/arm/dts/sun5i-r8-chip.dts | 261 +++++++++++++++++++++++++++++++++++++++ arch/arm/dts/sun5i-r8.dtsi | 61 +++++++++ arch/arm/dts/sun5i.dtsi | 14 +++ configs/CHIP_defconfig | 14 +++ drivers/usb/gadget/f_fastboot.c | 2 +- include/configs/sunxi-common.h | 7 +- 9 files changed, 364 insertions(+), 11 deletions(-) create mode 100644 arch/arm/dts/sun5i-r8-chip.dts create mode 100644 arch/arm/dts/sun5i-r8.dtsi create mode 100644 configs/CHIP_defconfig -- 2.5.1

5 31

[U-Boot] [PATCH 0/7] malloc_simple: Add support for switching to DRAM heap
by Hans de Goede 22 Sep '15

22 Sep '15

Hi Simon, Here is a patch-set to add support to keep using simple-malloc after dram is available in the SPL, using the spl stack relocation function to switch to a new heap which uses a chunk of the now in DRAM stack. I think you're the best candidate to review and merge the core patches (patches 1 - 4). I'll merge the sunxi patches through my tree once the core patches are in place. Esp. the patch to make sunxi use CONFIG_SPL_STACK_R is likely to cause conflicts if not merged through the sunxi tree. Regards, Hans p.s. In case it is not clear, these patches are intended for the next devel cycle.

3 20

[U-Boot] [PATCH V2 0/4] cm-fx6 updates for Utilite
by Nikita Kiryanov 22 Sep '15

22 Sep '15

This series provides a fix necessary for early models of Utilite, a miniature desktop based on CM-FX6. It implements a dynamic modification to the device tree that is necessary for mmc boot. Cc: Stefano Babic <sbabic(a)denx.de> Cc: Igor Grinberg <grinberg(a)compulab.co.il> Changes in V2: - New patch: compulab: eeprom: propagate error value in read_mac_addr() - s/BOARD_PRODUCT_NAME_*/PRODUCT_NAME_* - rewrote cl_eeprom_get_product_name() to take a buffer parameter and added documentation - #define USDHC3_PATH instead of const variable usdhc3_path - Do not update device tree on eeprom read failures in a more explicit way Nikita Kiryanov (4): compulab: eeprom: select i2c bus when querying for board rev compulab: eeprom: propagate error value in read_mac_addr() compulab: eeprom: add support for obtaining product name arm: mx6: cm-fx6: modify device tree for old revisions of utilite board/compulab/cm_fx6/cm_fx6.c | 22 +++++++++++++++++++++- board/compulab/cm_t35/cm_t35.c | 2 +- board/compulab/common/eeprom.c | 40 ++++++++++++++++++++++++++++++++++++---- board/compulab/common/eeprom.h | 10 ++++++++-- 4 files changed, 66 insertions(+), 8 deletions(-) -- 1.9.1

3 11

[U-Boot] [PATCH 1/4] dfu: defer parsing of device string to IO backend
by Stephen Warren 22 Sep '15

22 Sep '15

From: Stephen Warren <swarren(a)nvidia.com> Devices are not all identified by a single integer. To support this, defer the parsing of the device string to the IO backed, so that it can apply the appropriate rules. SPI devices are specified as controller:chip_select. SPI/SF support will be added soon. MMC devices can also be specified as controller[.hwpart][:partition] in many commands, although we don't support that syntax in DFU. Signed-off-by: Stephen Warren <swarren(a)nvidia.com> --- common/cmd_dfu.c | 3 +-- drivers/dfu/dfu.c | 20 ++++++++++---------- drivers/dfu/dfu_mmc.c | 21 ++++++++++++--------- drivers/dfu/dfu_nand.c | 2 +- drivers/dfu/dfu_ram.c | 2 +- include/dfu.h | 22 +++++++++++++--------- 6 files changed, 38 insertions(+), 32 deletions(-) diff --git a/common/cmd_dfu.c b/common/cmd_dfu.c index 433bddd5d2bd..2633b30e556f 100644 --- a/common/cmd_dfu.c +++ b/common/cmd_dfu.c @@ -24,8 +24,7 @@ static int do_dfu(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) int ret, i = 0; - ret = dfu_init_env_entities(interface, simple_strtoul(devstring, - NULL, 10)); + ret = dfu_init_env_entities(interface, devstring); if (ret) goto done; diff --git a/drivers/dfu/dfu.c b/drivers/dfu/dfu.c index 1bf66d0613c9..26d3b44e40f5 100644 --- a/drivers/dfu/dfu.c +++ b/drivers/dfu/dfu.c @@ -44,7 +44,7 @@ static int dfu_find_alt_num(const char *s) return ++i; } -int dfu_init_env_entities(char *interface, int dev) +int dfu_init_env_entities(char *interface, char *devstr) { const char *str_env; char *env_bkp; @@ -57,7 +57,7 @@ int dfu_init_env_entities(char *interface, int dev) } env_bkp = strdup(str_env); - ret = dfu_config_entities(env_bkp, interface, dev); + ret = dfu_config_entities(env_bkp, interface, devstr); if (ret) { error("DFU entities configuration failed!\n"); return ret; @@ -389,26 +389,25 @@ int dfu_read(struct dfu_entity *dfu, void *buf, int size, int blk_seq_num) } static int dfu_fill_entity(struct dfu_entity *dfu, char *s, int alt, - char *interface, int num) + char *interface, char *devstr) { char *st; - debug("%s: %s interface: %s num: %d\n", __func__, s, interface, num); + debug("%s: %s interface: %s dev: %s\n", __func__, s, interface, devstr); st = strsep(&s, " "); strcpy(dfu->name, st); - dfu->dev_num = num; dfu->alt = alt; /* Specific for mmc device */ if (strcmp(interface, "mmc") == 0) { - if (dfu_fill_entity_mmc(dfu, s)) + if (dfu_fill_entity_mmc(dfu, devstr, s)) return -1; } else if (strcmp(interface, "nand") == 0) { - if (dfu_fill_entity_nand(dfu, s)) + if (dfu_fill_entity_nand(dfu, devstr, s)) return -1; } else if (strcmp(interface, "ram") == 0) { - if (dfu_fill_entity_ram(dfu, s)) + if (dfu_fill_entity_ram(dfu, devstr, s)) return -1; } else { printf("%s: Device %s not (yet) supported!\n", @@ -434,7 +433,7 @@ void dfu_free_entities(void) alt_num_cnt = 0; } -int dfu_config_entities(char *env, char *interface, int num) +int dfu_config_entities(char *env, char *interface, char *devstr) { struct dfu_entity *dfu; int i, ret; @@ -457,7 +456,8 @@ int dfu_config_entities(char *env, char *interface, int num) for (i = 0; i < dfu_alt_num; i++) { s = strsep(&env, ";"); - ret = dfu_fill_entity(&dfu[i], s, alt_num_cnt, interface, num); + ret = dfu_fill_entity(&dfu[i], s, alt_num_cnt, interface, + devstr); if (ret) return -1; diff --git a/drivers/dfu/dfu_mmc.c b/drivers/dfu/dfu_mmc.c index 322bd8c5d2de..72fa03eedaec 100644 --- a/drivers/dfu/dfu_mmc.c +++ b/drivers/dfu/dfu_mmc.c @@ -27,7 +27,7 @@ static int mmc_access_part(struct dfu_entity *dfu, struct mmc *mmc, int part) if (part == mmc->part_num) return 0; - ret = mmc_switch_part(dfu->dev_num, part); + ret = mmc_switch_part(dfu->data.mmc.dev_num, part); if (ret) { error("Cannot switch to partition %d\n", part); return ret; @@ -40,7 +40,7 @@ static int mmc_access_part(struct dfu_entity *dfu, struct mmc *mmc, int part) static int mmc_block_op(enum dfu_op op, struct dfu_entity *dfu, u64 offset, void *buf, long *len) { - struct mmc *mmc = find_mmc_device(dfu->dev_num); + struct mmc *mmc = find_mmc_device(dfu->data.mmc.dev_num); u32 blk_start, blk_count, n = 0; int ret, part_num_bkp = 0; @@ -67,15 +67,15 @@ static int mmc_block_op(enum dfu_op op, struct dfu_entity *dfu, } debug("%s: %s dev: %d start: %d cnt: %d buf: 0x%p\n", __func__, - op == DFU_OP_READ ? "MMC READ" : "MMC WRITE", dfu->dev_num, - blk_start, blk_count, buf); + op == DFU_OP_READ ? "MMC READ" : "MMC WRITE", + dfu->data.mmc.dev_num, blk_start, blk_count, buf); switch (op) { case DFU_OP_READ: - n = mmc->block_dev.block_read(dfu->dev_num, blk_start, + n = mmc->block_dev.block_read(dfu->data.mmc.dev_num, blk_start, blk_count, buf); break; case DFU_OP_WRITE: - n = mmc->block_dev.block_write(dfu->dev_num, blk_start, + n = mmc->block_dev.block_write(dfu->data.mmc.dev_num, blk_start, blk_count, buf); break; default: @@ -270,7 +270,7 @@ int dfu_read_medium_mmc(struct dfu_entity *dfu, u64 offset, void *buf, * 4th (optional): * mmcpart <num> (access to HW eMMC partitions) */ -int dfu_fill_entity_mmc(struct dfu_entity *dfu, char *s) +int dfu_fill_entity_mmc(struct dfu_entity *dfu, char *devstr, char *s) { const char *entity_type; size_t second_arg; @@ -281,6 +281,8 @@ int dfu_fill_entity_mmc(struct dfu_entity *dfu, char *s) const char *argv[3]; const char **parg = argv; + dfu->data.mmc.dev_num = simple_strtoul(devstr, NULL, 10); + for (; parg < argv + sizeof(argv) / sizeof(*argv); ++parg) { *parg = strsep(&s, " "); if (*parg == NULL) { @@ -297,9 +299,10 @@ int dfu_fill_entity_mmc(struct dfu_entity *dfu, char *s) second_arg = simple_strtoul(argv[1], NULL, 0); third_arg = simple_strtoul(argv[2], NULL, 0); - mmc = find_mmc_device(dfu->dev_num); + mmc = find_mmc_device(dfu->data.mmc.dev_num); if (mmc == NULL) { - error("Couldn't find MMC device no. %d.\n", dfu->dev_num); + error("Couldn't find MMC device no. %d.\n", + dfu->data.mmc.dev_num); return -ENODEV; } diff --git a/drivers/dfu/dfu_nand.c b/drivers/dfu/dfu_nand.c index e1c9a8849246..f9ee18999ab7 100644 --- a/drivers/dfu/dfu_nand.c +++ b/drivers/dfu/dfu_nand.c @@ -179,7 +179,7 @@ unsigned int dfu_polltimeout_nand(struct dfu_entity *dfu) return DFU_DEFAULT_POLL_TIMEOUT; } -int dfu_fill_entity_nand(struct dfu_entity *dfu, char *s) +int dfu_fill_entity_nand(struct dfu_entity *dfu, char *devstr, char *s) { char *st; int ret, dev, part; diff --git a/drivers/dfu/dfu_ram.c b/drivers/dfu/dfu_ram.c index b6c6e60c443c..e094a946f6be 100644 --- a/drivers/dfu/dfu_ram.c +++ b/drivers/dfu/dfu_ram.c @@ -52,7 +52,7 @@ static int dfu_read_medium_ram(struct dfu_entity *dfu, u64 offset, return dfu_transfer_medium_ram(DFU_OP_READ, dfu, offset, buf, len); } -int dfu_fill_entity_ram(struct dfu_entity *dfu, char *s) +int dfu_fill_entity_ram(struct dfu_entity *dfu, char *devstr, char *s) { char *st; diff --git a/include/dfu.h b/include/dfu.h index df720310f2cc..21390aa9b7b3 100644 --- a/include/dfu.h +++ b/include/dfu.h @@ -39,6 +39,8 @@ enum dfu_op { }; struct mmc_internal_data { + int dev_num; + /* RAW programming */ unsigned int lba_start; unsigned int lba_size; @@ -87,7 +89,6 @@ struct dfu_entity { char name[DFU_NAME_SIZE]; int alt; void *dev_private; - int dev_num; enum dfu_device_type dev_type; enum dfu_layout layout; @@ -125,7 +126,7 @@ struct dfu_entity { unsigned int inited:1; }; -int dfu_config_entities(char *s, char *interface, int num); +int dfu_config_entities(char *s, char *interface, char *devstr); void dfu_free_entities(void); void dfu_show_entities(void); int dfu_get_alt_number(void); @@ -136,7 +137,7 @@ char *dfu_extract_token(char** e, int *n); void dfu_trigger_reset(void); int dfu_get_alt(char *name); bool dfu_reset(void); -int dfu_init_env_entities(char *interface, int dev); +int dfu_init_env_entities(char *interface, char *devstr); unsigned char *dfu_get_buf(void); unsigned char *dfu_free_buf(void); unsigned long dfu_get_buf_size(void); @@ -146,9 +147,10 @@ int dfu_write(struct dfu_entity *de, void *buf, int size, int blk_seq_num); int dfu_flush(struct dfu_entity *de, void *buf, int size, int blk_seq_num); /* Device specific */ #ifdef CONFIG_DFU_MMC -extern int dfu_fill_entity_mmc(struct dfu_entity *dfu, char *s); +extern int dfu_fill_entity_mmc(struct dfu_entity *dfu, char *devstr, char *s); #else -static inline int dfu_fill_entity_mmc(struct dfu_entity *dfu, char *s) +static inline int dfu_fill_entity_mmc(struct dfu_entity *dfu, char *devstr, + char *s) { puts("MMC support not available!\n"); return -1; @@ -156,9 +158,10 @@ static inline int dfu_fill_entity_mmc(struct dfu_entity *dfu, char *s) #endif #ifdef CONFIG_DFU_NAND -extern int dfu_fill_entity_nand(struct dfu_entity *dfu, char *s); +extern int dfu_fill_entity_nand(struct dfu_entity *dfu, char *devstr, char *s); #else -static inline int dfu_fill_entity_nand(struct dfu_entity *dfu, char *s) +static inline int dfu_fill_entity_nand(struct dfu_entity *dfu, char *devstr, + char *s) { puts("NAND support not available!\n"); return -1; @@ -166,9 +169,10 @@ static inline int dfu_fill_entity_nand(struct dfu_entity *dfu, char *s) #endif #ifdef CONFIG_DFU_RAM -extern int dfu_fill_entity_ram(struct dfu_entity *dfu, char *s); +extern int dfu_fill_entity_ram(struct dfu_entity *dfu, char *devstr, char *s); #else -static inline int dfu_fill_entity_ram(struct dfu_entity *dfu, char *s) +static inline int dfu_fill_entity_ram(struct dfu_entity *dfu, char *devstr, + char *s) { puts("RAM support not available!\n"); return -1; -- 1.8.1.5

3 15

[U-Boot] [PATCH] mmc: sdhci: Fix the SD clock stop sequence
by Wenyou Yang 22 Sep '15

22 Sep '15

According to the SDHC specification, stopping the SD Clock is by setting the SD Clock Enable bit in the Clock Control register at 0, instead of setting all bits at 0. Before stopping the SD clock, we need to make sure all SD transactions to complete, so add checking the CMD and DAT bits in the Presen State register, before stopping the SD clock. Signed-off-by: Wenyou Yang <wenyou.yang(a)atmel.com> --- drivers/mmc/sdhci.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c index d89e302..f02db4e 100644 --- a/drivers/mmc/sdhci.c +++ b/drivers/mmc/sdhci.c @@ -286,9 +286,15 @@ static int sdhci_send_command(struct mmc *mmc, struct mmc_cmd *cmd, static int sdhci_set_clock(struct mmc *mmc, unsigned int clock) { struct sdhci_host *host = mmc->priv; - unsigned int div, clk, timeout; + unsigned int div, clk, timeout, reg; - sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL); + while (sdhci_readl(host, SDHCI_PRESENT_STATE) & + (SDHCI_CMD_INHIBIT | SDHCI_DATA_INHIBIT)) + ; + + reg = sdhci_readw(host, SDHCI_CLOCK_CONTROL); + reg &= ~SDHCI_CLOCK_CARD_EN; + sdhci_writew(host, reg, SDHCI_CLOCK_CONTROL); if (clock == 0) return 0; -- 1.7.9.5

3 2

[U-Boot] [PATCH] dts: do not cut down pinctrl-0 and pinctrl-names for SPL full-pinctrl
by Masahiro Yamada 22 Sep '15

22 Sep '15

These properties are necessary to use full-featured pinctrl drivers in SPL. Signed-off-by: Masahiro Yamada <yamada.masahiro(a)socionext.com> --- dts/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/dts/Kconfig b/dts/Kconfig index a04bb96..0f4d755 100644 --- a/dts/Kconfig +++ b/dts/Kconfig @@ -59,6 +59,7 @@ config DEFAULT_DEVICE_TREE config OF_SPL_REMOVE_PROPS string "List of device tree properties to drop for SPL" depends on SPL_OF_CONTROL + default "clocks clock-names interrupt-parent" if SPL_PINCTRL_FULL default "pinctrl-0 pinctrl-names clocks clock-names interrupt-parent" help Since SPL normally runs in a reduced memory space, the device tree -- 1.9.1

2 4

[U-Boot] Flashing SPI NOR via DFU
by Fabio Estevam 22 Sep '15

22 Sep '15

Hi, I am trying to use DFU to flash the SPI NOR on a mx6qsabresd. These are the changes I made: --- a/include/configs/mx6sabre_common.h +++ b/include/configs/mx6sabre_common.h @@ -80,6 +80,7 @@ "boot_fdt=try\0" \ "ip_dyn=yes\0" \ "console=" CONFIG_CONSOLE_DEV "\0" \ + "dfu_alt_info=u-boot raw 0x0 0xc0000\0" \ "fdt_high=0xffffffff\0" \ "initrd_high=0xffffffff\0" \ "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ @@ -238,6 +239,15 @@ #define CONFIG_G_DNL_VENDOR_NUM 0x0525 #define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5 #define CONFIG_G_DNL_MANUFACTURER "FSL" + +/* USB Device Firmware Update support */ +#define CONFIG_CMD_DFU +#define CONFIG_USB_FUNCTION_DFU +#define CONFIG_DFU_MMC +#define CONFIG_DFU_SF +#define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_16M +#define DFU_DEFAULT_POLL_TIMEOUT 300 Then I run: => dfu 0 sf 0:0:25000000:0 SF: Detected M25P32 with page size 256 Bytes, erase size 64 KiB, total 4 MiB and on the PC host: sudo dfu-util -D u-boot.imx -a u-boot dfu-util 0.8 Copyright 2005-2009 Weston Schmidt, Harald Welte and OpenMoko Inc. Copyright 2010-2014 Tormod Volden and Stefan Schmidt This program is Free Software and has ABSOLUTELY NO WARRANTY Please report bugs to dfu-util(a)lists.gnumonks.org dfu-util: Invalid DFU suffix signature dfu-util: A valid DFU suffix will be required in a future dfu-util release!!! Opening DFU capable USB device... ID 0525:a4a5 Run-time device DFU version 0110 Claiming USB DFU Interface... Setting Alternate Setting #0 ... Determining device status: state = dfuIDLE, status = 0 dfuIDLE, continuing DFU mode device DFU version 0110 Device returned transfer size 4096 Copying data from PC to DFU device Download [=========================] 100% 478208 bytes Download done. state(7) = dfuMANIFEST, status(0) = No error condition is present state(10) = dfuERROR, status(14) = Something went wrong, but the device does not know what it was Done! and the mx6qsabresd hangs at the download mark: ######## I used the dfu_alt_info from Boundary Devices' U-boot. I am able to flash the SD card (need to adjust dfu_alt_info in this case), so DFU is working. Is there anything I am missing to get SPI NOR to be flashed via DFU? Thanks, Fabio Estevam

1 1

[U-Boot] Galileo instructions
by Simon Glass 22 Sep '15

22 Sep '15

Hi Bin, I have a Galileo Gen 2 and am trying to get U-Boot to start on it. The first problem I have is that the schematic says the chip is a W25Q64FV which I think is an 8MB part, but the image produced is only 1MB. Also I know that there is a Gen 1 and a Gen 2. I recall you saying that U-Boot supports the Gen 2 but can easily support the Gen 1. But perhaps I have done something wrong. I downloaded the BSP from here: https://downloadcenter.intel.com/download/23197/Intel-Quark-BSP File name: Board_Support_Package_Sources_for_Intel_Quark_v1.1.0.7z Version: 1.1.0 (Latest) Date: 03/03/2015 Size: 2.72 MB Any hints? I am using a dediprog em100 with a test clip over the flash chip. Regards, Simon

2 12

[U-Boot] [PATCH 1/3] imx-common: fix iomux settings
by Peng Fan 22 Sep '15

22 Sep '15

When setting iomux for a pin mux, there is no need to check mux_ctrl_ofs. Also If still checking mux_ctrl_ofs, we have no chance to set iomux for i.MX7D IOMUXC_LPSR_SW_MUX_CTL_PAD_GPIO1_IO00, because the mux_ctrl_ofs for this register is 0. Signed-off-by: Peng Fan <Peng.Fan(a)freescale.com> Cc: Stefano Babic <sbabic(a)denx.de> Cc: Fabio Estevam <fabio.estevam(a)freescale.com> --- arch/arm/imx-common/iomux-v3.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/arm/imx-common/iomux-v3.c b/arch/arm/imx-common/iomux-v3.c index b4f481f..9b9cf58 100644 --- a/arch/arm/imx-common/iomux-v3.c +++ b/arch/arm/imx-common/iomux-v3.c @@ -53,8 +53,7 @@ void imx_iomux_v3_setup_pad(iomux_v3_cfg_t pad) } #endif - if (mux_ctrl_ofs) - __raw_writel(mux_mode, base + mux_ctrl_ofs); + __raw_writel(mux_mode, base + mux_ctrl_ofs); if (sel_input_ofs) __raw_writel(sel_input, base + sel_input_ofs); -- 1.8.4

5 17

[U-Boot] [PATCH] ARM: tegra: p2371-2180: import latest pinmux
by Stephen Warren 22 Sep '15

22 Sep '15

From: Stephen Warren <swarren(a)nvidia.com> In order to avoid any assumptions about any device connected to P2371-2180's expansion connector, the latest pinmux spreadsheet configures all muxable pins on that connector to be GPIO inputs, with on-chip pulls where appropriate. Signed-off-by: Stephen Warren <swarren(a)nvidia.com> --- board/nvidia/p2371-2180/pinmux-config-p2371-2180.h | 56 ++++++++++++++-------- 1 file changed, 35 insertions(+), 21 deletions(-) diff --git a/board/nvidia/p2371-2180/pinmux-config-p2371-2180.h b/board/nvidia/p2371-2180/pinmux-config-p2371-2180.h index ff89b9ee4b0f..d5be6ecda93e 100644 --- a/board/nvidia/p2371-2180/pinmux-config-p2371-2180.h +++ b/board/nvidia/p2371-2180/pinmux-config-p2371-2180.h @@ -24,6 +24,17 @@ static const struct tegra_gpio_config p2371_2180_gpio_inits[] = { /* gpio, init_val */ GPIO_INIT(A5, IN), + GPIO_INIT(B0, IN), + GPIO_INIT(B1, IN), + GPIO_INIT(B2, IN), + GPIO_INIT(B3, IN), + GPIO_INIT(C0, IN), + GPIO_INIT(C1, IN), + GPIO_INIT(C2, IN), + GPIO_INIT(C3, IN), + GPIO_INIT(C4, IN), + GPIO_INIT(E4, IN), + GPIO_INIT(E5, IN), GPIO_INIT(E6, IN), GPIO_INIT(H0, OUT0), GPIO_INIT(H1, OUT0), @@ -32,7 +43,7 @@ static const struct tegra_gpio_config p2371_2180_gpio_inits[] = { GPIO_INIT(H4, OUT0), GPIO_INIT(H5, IN), GPIO_INIT(H6, IN), - GPIO_INIT(H7, OUT0), + GPIO_INIT(H7, IN), GPIO_INIT(I0, OUT0), GPIO_INIT(I1, IN), GPIO_INIT(I2, OUT0), @@ -47,6 +58,8 @@ static const struct tegra_gpio_config p2371_2180_gpio_inits[] = { GPIO_INIT(S7, OUT0), GPIO_INIT(T0, OUT0), GPIO_INIT(T1, OUT0), + GPIO_INIT(U2, IN), + GPIO_INIT(U3, IN), GPIO_INIT(V1, OUT0), GPIO_INIT(V2, OUT0), GPIO_INIT(V3, IN), @@ -65,8 +78,9 @@ static const struct tegra_gpio_config p2371_2180_gpio_inits[] = { GPIO_INIT(Z0, IN), GPIO_INIT(Z2, IN), GPIO_INIT(Z3, OUT0), + GPIO_INIT(BB0, IN), GPIO_INIT(BB2, OUT0), - GPIO_INIT(BB3, OUT0), + GPIO_INIT(BB3, IN), GPIO_INIT(CC1, IN), }; @@ -91,19 +105,19 @@ static const struct pmux_pingrp_config p2371_2180_pingrps[] = { PINCFG(PEX_L1_CLKREQ_N_PA4, PE1, NORMAL, NORMAL, INPUT, DISABLE, HIGH), PINCFG(SATA_LED_ACTIVE_PA5, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT), PINCFG(PA6, SATA, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT), - PINCFG(DAP1_FS_PB0, I2S1, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT), - PINCFG(DAP1_DIN_PB1, I2S1, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT), - PINCFG(DAP1_DOUT_PB2, I2S1, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT), - PINCFG(DAP1_SCLK_PB3, I2S1, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(DAP1_FS_PB0, DEFAULT, DOWN, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(DAP1_DIN_PB1, DEFAULT, DOWN, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(DAP1_DOUT_PB2, DEFAULT, DOWN, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(DAP1_SCLK_PB3, DEFAULT, DOWN, NORMAL, INPUT, DISABLE, DEFAULT), PINCFG(SPI2_MOSI_PB4, SPI2, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT), PINCFG(SPI2_MISO_PB5, SPI2, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT), PINCFG(SPI2_SCK_PB6, SPI2, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT), PINCFG(SPI2_CS0_PB7, SPI2, UP, NORMAL, INPUT, DISABLE, DEFAULT), - PINCFG(SPI1_MOSI_PC0, SPI1, DOWN, NORMAL, INPUT, DISABLE, DEFAULT), - PINCFG(SPI1_MISO_PC1, SPI1, DOWN, NORMAL, INPUT, DISABLE, DEFAULT), - PINCFG(SPI1_SCK_PC2, SPI1, DOWN, NORMAL, INPUT, DISABLE, DEFAULT), - PINCFG(SPI1_CS0_PC3, SPI1, UP, NORMAL, INPUT, DISABLE, DEFAULT), - PINCFG(SPI1_CS1_PC4, SPI1, UP, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(SPI1_MOSI_PC0, DEFAULT, DOWN, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(SPI1_MISO_PC1, DEFAULT, DOWN, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(SPI1_SCK_PC2, DEFAULT, DOWN, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(SPI1_CS0_PC3, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(SPI1_CS1_PC4, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT), PINCFG(SPI4_SCK_PC5, SPI4, DOWN, NORMAL, INPUT, DISABLE, DEFAULT), PINCFG(SPI4_CS0_PC6, SPI4, UP, NORMAL, INPUT, DISABLE, DEFAULT), PINCFG(SPI4_MOSI_PC7, SPI4, DOWN, NORMAL, INPUT, DISABLE, DEFAULT), @@ -116,9 +130,9 @@ static const struct pmux_pingrp_config p2371_2180_pingrps[] = { PINCFG(DMIC1_DAT_PE1, I2S3, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT), PINCFG(DMIC2_CLK_PE2, I2S3, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT), PINCFG(DMIC2_DAT_PE3, I2S3, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT), - PINCFG(DMIC3_CLK_PE4, DMIC3, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT), - PINCFG(DMIC3_DAT_PE5, DMIC3, UP, NORMAL, INPUT, DISABLE, DEFAULT), - PINCFG(PE6, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(DMIC3_CLK_PE4, DEFAULT, DOWN, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(DMIC3_DAT_PE5, DEFAULT, DOWN, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(PE6, DEFAULT, DOWN, NORMAL, INPUT, DISABLE, DEFAULT), PINCFG(PE7, PWM3, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT), PINCFG(GEN3_I2C_SCL_PF0, I2C3, NORMAL, NORMAL, INPUT, DISABLE, NORMAL), PINCFG(GEN3_I2C_SDA_PF1, I2C3, NORMAL, NORMAL, INPUT, DISABLE, NORMAL), @@ -133,7 +147,7 @@ static const struct pmux_pingrp_config p2371_2180_pingrps[] = { PINCFG(BT_RST_PH4, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT), PINCFG(BT_WAKE_AP_PH5, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT), PINCFG(PH6, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT), - PINCFG(AP_WAKE_NFC_PH7, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT), + PINCFG(AP_WAKE_NFC_PH7, DEFAULT, DOWN, NORMAL, INPUT, DISABLE, DEFAULT), PINCFG(NFC_EN_PI0, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT), PINCFG(NFC_INT_PI1, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT), PINCFG(GPS_EN_PI2, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT), @@ -184,8 +198,8 @@ static const struct pmux_pingrp_config p2371_2180_pingrps[] = { PINCFG(CAM1_STROBE_PT1, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT), PINCFG(UART1_TX_PU0, UARTA, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT), PINCFG(UART1_RX_PU1, UARTA, UP, NORMAL, INPUT, DISABLE, DEFAULT), - PINCFG(UART1_RTS_PU2, UARTA, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT), - PINCFG(UART1_CTS_PU3, UARTA, UP, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(UART1_RTS_PU2, DEFAULT, DOWN, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(UART1_CTS_PU3, DEFAULT, DOWN, NORMAL, INPUT, DISABLE, DEFAULT), PINCFG(LCD_BL_PWM_PV0, PWM0, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT), PINCFG(LCD_BL_EN_PV1, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT), PINCFG(LCD_RST_PV2, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT), @@ -194,10 +208,10 @@ static const struct pmux_pingrp_config p2371_2180_pingrps[] = { PINCFG(AP_READY_PV5, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT), PINCFG(TOUCH_RST_PV6, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT), PINCFG(TOUCH_CLK_PV7, TOUCH, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT), - PINCFG(MODEM_WAKE_AP_PX0, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(MODEM_WAKE_AP_PX0, DEFAULT, DOWN, NORMAL, INPUT, DISABLE, DEFAULT), PINCFG(TOUCH_INT_PX1, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT), PINCFG(MOTION_INT_PX2, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT), - PINCFG(ALS_PROX_INT_PX3, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(ALS_PROX_INT_PX3, DEFAULT, DOWN, NORMAL, INPUT, DISABLE, DEFAULT), PINCFG(TEMP_ALERT_PX4, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT), PINCFG(BUTTON_POWER_ON_PX5, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT), PINCFG(BUTTON_VOL_UP_PX6, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT), @@ -218,10 +232,10 @@ static const struct pmux_pingrp_config p2371_2180_pingrps[] = { PINCFG(DAP2_SCLK_PAA1, I2S2, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT), PINCFG(DAP2_DIN_PAA2, I2S2, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT), PINCFG(DAP2_DOUT_PAA3, I2S2, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT), - PINCFG(AUD_MCLK_PBB0, AUD, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT), + PINCFG(AUD_MCLK_PBB0, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT), PINCFG(DVFS_PWM_PBB1, CLDVFS, NORMAL, TRISTATE, OUTPUT, DISABLE, DEFAULT), PINCFG(DVFS_CLK_PBB2, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT), - PINCFG(GPIO_X1_AUD_PBB3, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT), + PINCFG(GPIO_X1_AUD_PBB3, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT), PINCFG(GPIO_X3_AUD_PBB4, RSVD0, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), PINCFG(HDMI_CEC_PCC0, CEC, NORMAL, NORMAL, INPUT, DISABLE, HIGH), PINCFG(HDMI_INT_DP_HPD_PCC1, DEFAULT, DOWN, NORMAL, INPUT, DISABLE, NORMAL), -- 1.9.1

1 0