December 2015 - U-Boot

Re: [U-Boot] [PATCH 1/3] armv8/ls1043aqds: add DSPI support
by Shaohui Xie 24 Dec '15

24 Dec '15

> -----Original Message----- > From: Gong Qianyu [mailto:Qianyu.Gong@nxp.com] > Sent: Thursday, December 24, 2015 4:40 PM > To: u-boot(a)lists.denx.de > Cc: Mingkai Hu; R58495(a)freescale.com; B48286(a)freescale.com; > Shaohui.Xie(a)freescale.com; Wenbin.Song(a)freescale.com; > B07421(a)freescale.com; Gong Qianyu; Qianyu Gong > Subject: [PATCH 1/3] armv8/ls1043aqds: add DSPI support > > From: Gong Qianyu <Qianyu.Gong(a)freescale.com> > > Enable three DSPI flash memories on board. > > Commands: > => sf probe 1:0 > SF: Detected N25Q128A with page size 256 Bytes, > erase size 64 KiB, total 16 MiB > => sf probe 1:1 > SF: Detected SST25WF040B with page size 256 Bytes, > erase size 4 KiB, total 512 KiB > => sf probe 1:2 > SF: Detected EN25S64 with page size 256 Bytes, > erase size 64 KiB, total 8 MiB > > Signed-off-by: Gong Qianyu <Qianyu.Gong(a)freescale.com> > Signed-off-by: Gong Qianyu <Qianyu.Gong(a)nxp.com> [S.H] keep one email address. > --- > arch/arm/dts/fsl-ls1043a-qds.dts | 30 > ++++++++++++++++++++++++++++++ > configs/ls1043aqds_defconfig | 3 +++ > configs/ls1043aqds_nand_defconfig | 5 +++++ > configs/ls1043aqds_sdcard_ifc_defconfig | 5 +++++ > include/configs/ls1043a_common.h | 13 +++++++++++++ > include/configs/ls1043ardb.h | 10 ---------- > 6 files changed, 56 insertions(+), 10 deletions(-) > > diff --git a/arch/arm/dts/fsl-ls1043a-qds.dts b/arch/arm/dts/fsl-ls1043a- > qds.dts > index 7435222..0fe9c54 100644 > --- a/arch/arm/dts/fsl-ls1043a-qds.dts > +++ b/arch/arm/dts/fsl-ls1043a-qds.dts > @@ -15,6 +15,36 @@ > > / { > model = "LS1043A QDS Board"; > + aliases { > + spi1 = &dspi0; > + }; > +}; > + > +&dspi0 { > + bus-num = <0>; > + status = "okay"; > + > + dflash0: n25q128a { > + #address-cells = <1>; > + #size-cells = <1>; > + compatible = "spi-flash"; > + reg = <0>; > + spi-max-frequency = <1000000>; /* input clock */ > + }; [S.H] empty line. > + dflash1: sst25wf040b { > + #address-cells = <1>; > + #size-cells = <1>; > + compatible = "spi-flash"; > + spi-max-frequency = <3500000>; > + reg = <1>; > + }; [S.H] ditto. > + dflash2: en25s64 { > + #address-cells = <1>; > + #size-cells = <1>; > + compatible = "spi-flash"; > + spi-max-frequency = <3500000>; > + reg = <2>; > + }; > }; > > &i2c0 { > diff --git a/configs/ls1043aqds_defconfig b/configs/ls1043aqds_defconfig > index 60fb0ad..5b12632 100644 > --- a/configs/ls1043aqds_defconfig > +++ b/configs/ls1043aqds_defconfig > @@ -4,3 +4,6 @@ CONFIG_TARGET_LS1043AQDS=y CONFIG_SYS_NS16550=y > CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-qds" > CONFIG_OF_CONTROL=y > +CONFIG_DM=y > +CONFIG_SPI_FLASH=y > +CONFIG_DM_SPI=y > diff --git a/configs/ls1043aqds_nand_defconfig > b/configs/ls1043aqds_nand_defconfig > index e9d5afd..d4f758c 100644 > --- a/configs/ls1043aqds_nand_defconfig > +++ b/configs/ls1043aqds_nand_defconfig > @@ -3,3 +3,8 @@ > CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4,RAMBOOT_PBL,SPL_FSL_PBL,NAND_BOOT" > CONFIG_ARM=y > CONFIG_TARGET_LS1043AQDS=y > CONFIG_SYS_NS16550=y > +CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-qds" > +CONFIG_OF_CONTROL=y > +CONFIG_DM=y > +CONFIG_SPI_FLASH=y > +CONFIG_DM_SPI=y > diff --git a/configs/ls1043aqds_sdcard_ifc_defconfig > b/configs/ls1043aqds_sdcard_ifc_defconfig > index 6765d3d..25ae9cc 100644 > --- a/configs/ls1043aqds_sdcard_ifc_defconfig > +++ b/configs/ls1043aqds_sdcard_ifc_defconfig > @@ -3,3 +3,8 @@ > CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4,RAMBOOT_PBL,SPL_FSL_PBL,SD_BOOT" > CONFIG_ARM=y > CONFIG_TARGET_LS1043AQDS=y > CONFIG_SYS_NS16550=y > +CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-qds" > +CONFIG_OF_CONTROL=y > +CONFIG_DM=y > +CONFIG_SPI_FLASH=y > +CONFIG_DM_SPI=y > diff --git a/include/configs/ls1043a_common.h > b/include/configs/ls1043a_common.h > index 677d281..139d1d4 100644 > --- a/include/configs/ls1043a_common.h > +++ b/include/configs/ls1043a_common.h > @@ -197,6 +197,19 @@ > #define CONFIG_DOS_PARTITION > #endif > > +/* DSPI */ > +#define CONFIG_FSL_DSPI > +#ifdef CONFIG_FSL_DSPI > +#define CONFIG_CMD_SF > +#define CONFIG_DM_SPI_FLASH > +#define CONFIG_SPI_FLASH_STMICRO /* cs0 */ > +#define CONFIG_SPI_FLASH_SST /* cs1 */ > +#define CONFIG_SPI_FLASH_EON /* cs2 */ > +#define CONFIG_SF_DEFAULT_BUS 1 > +#define CONFIG_SF_DEFAULT_CS 0 > +#endif > + > + [S.H] remove one empty line. > /* FMan ucode */ > #define CONFIG_SYS_DPAA_FMAN > #ifdef CONFIG_SYS_DPAA_FMAN > diff --git a/include/configs/ls1043ardb.h b/include/configs/ls1043ardb.h > index 585114f..f768348 100644 > --- a/include/configs/ls1043ardb.h > +++ b/include/configs/ls1043ardb.h > @@ -222,16 +222,6 @@ > #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 > #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 > > -/* DSPI */ > -#define CONFIG_FSL_DSPI > -#ifdef CONFIG_FSL_DSPI > -#define CONFIG_CMD_SF > -#define CONFIG_DM_SPI_FLASH > -#define CONFIG_SPI_FLASH_STMICRO > -#define CONFIG_SF_DEFAULT_BUS 1 > -#define CONFIG_SF_DEFAULT_CS 0 > -#endif > - > /* > * Environment > */ > -- > 2.1.0.27.g96db324

1 0

[U-Boot] [PATCH] sf: call callback even if the mtd erase failed
by Thomas Chou 24 Dec '15

24 Dec '15

Erase is an asynchronous operation. Device drivers are supposed to call instr->callback() whenever the operation completes, even if it completes with a failure. Signed-off-by: Thomas Chou <thomas(a)wytron.com.tw> --- drivers/mtd/spi/sf_mtd.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/mtd/spi/sf_mtd.c b/drivers/mtd/spi/sf_mtd.c index 0b9cb62..6140a35 100644 --- a/drivers/mtd/spi/sf_mtd.c +++ b/drivers/mtd/spi/sf_mtd.c @@ -24,6 +24,7 @@ static int spi_flash_mtd_erase(struct mtd_info *mtd, struct erase_info *instr) if (err) { instr->state = MTD_ERASE_FAILED; instr->fail_addr = MTD_FAIL_ADDR_UNKNOWN; + mtd_erase_callback(instr); return -EIO; } -- 2.5.0

1 0

[U-Boot] [PATCH v2] arm: socfpga: Enabling MTD default partitions
by Chin Liang See 24 Dec '15

24 Dec '15

Enabling MTD default partitions if its not defined in board configuration file. The layout as below device nor0 <ff705000.spi0>, # parts = 6 #: name size offset mask_flags 0: u-boot 0x00100000 0x00000000 0 1: env1 0x00040000 0x00100000 0 2: env2 0x00040000 0x00140000 0 3: UBI 0x03e80000 0x00180000 0 4: boot 0x00e80000 0x00180000 0 5: rootfs 0x01000000 0x01000000 0 Signed-off-by: Chin Liang See <clsee(a)altera.com> Cc: Dinh Nguyen <dinguyen(a)opensource.altera.com> Cc: Dinh Nguyen <dinh.linux(a)gmail.com> Cc: Pavel Machek <pavel(a)denx.de> Cc: Marek Vasut <marex(a)denx.de> Cc: Stefan Roese <sr(a)denx.de> --- Changes for v2 - include mtd layout as part of commit message - using spi0 in mtdparts for multiple spi support - fix the checking condition --- include/configs/socfpga_common.h | 25 ++++++++++++++++++++++++- 1 file changed, 24 insertions(+), 1 deletion(-) diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h index 699e78a..f7c0eb5 100644 --- a/include/configs/socfpga_common.h +++ b/include/configs/socfpga_common.h @@ -197,7 +197,7 @@ unsigned int cm_get_l4_sp_clk_hz(void); #define CONFIG_CMD_MTDPARTS #define CONFIG_MTD_DEVICE #define CONFIG_MTD_PARTITIONS -#define MTDIDS_DEFAULT "nor0=ff705000.spi" +#define MTDIDS_DEFAULT "nor0=ff705000.spi.0" #endif /* QSPI reference clock */ #ifndef __ASSEMBLY__ @@ -278,6 +278,29 @@ unsigned int cm_get_qspi_controller_clk_hz(void); #endif /* + * mtd partitioning for serial NOR flash + * + * device nor0 <ff705000.spi.0>, # parts = 6 + * #: name size offset mask_flags + * 0: u-boot 0x00100000 0x00000000 0 + * 1: env1 0x00040000 0x00100000 0 + * 2: env2 0x00040000 0x00140000 0 + * 3: UBI 0x03e80000 0x00180000 0 + * 4: boot 0x00e80000 0x00180000 0 + * 5: rootfs 0x01000000 0x01000000 0 + * + */ +#if defined(CONFIG_CMD_SF) && !defined(MTDPARTS_DEFAULT) +#define MTDPARTS_DEFAULT "mtdparts=ff705000.spi.0:"\ + "1m(u-boot)," \ + "256k(env1)," \ + "256k(env2)," \ + "14848k(boot)," \ + "16m(rootfs)," \ + "-@1536k(UBI)\0" +#endif + +/* * SPL * * SRAM Memory layout: -- 1.9.2.468.g3f0c02a

3 3

[U-Boot] [PATCH v2 1/5] arm: socfpga: Enable ubi and ubifs support
by Chin Liang See 24 Dec '15

24 Dec '15

When QSPI and NAND is enabled, the ubi and ubifs support will be enabled too. Signed-off-by: Chin Liang See <clsee(a)altera.com> Cc: Dinh Nguyen <dinguyen(a)opensource.altera.com> Cc: Dinh Nguyen <dinh.linux(a)gmail.com> Cc: Pavel Machek <pavel(a)denx.de> Cc: Marek Vasut <marex(a)denx.de> Cc: Stefan Roese <sr(a)denx.de> --- Changes for v2 - move CONFIG_SPI_FLASH_USE_4K_SECTORS to Kconfig --- include/configs/socfpga_common.h | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h index f7c0eb5..dfc3ed5 100644 --- a/include/configs/socfpga_common.h +++ b/include/configs/socfpga_common.h @@ -300,6 +300,14 @@ unsigned int cm_get_qspi_controller_clk_hz(void); "-@1536k(UBI)\0" #endif +/* UBI and UBIFS support */ +#if defined(CONFIG_CMD_SF) || defined(CONFIG_CMD_NAND) +#define CONFIG_CMD_UBI +#define CONFIG_CMD_UBIFS +#define CONFIG_RBTREE +#define CONFIG_LZO +#endif + /* * SPL * -- 1.9.2.468.g3f0c02a

4 13

[U-Boot] what are flash settings for Spansion 4M S29AL032D flash?
by Robert P. J. Day 23 Dec '15

23 Dec '15

a couple of us have been fighting with this for a couple hours ... we have an old powerpc board on which we've hacked u-boot to get to the prompt, now we're trying to get u-boot to recognize that flash chip. at u-boot time, u-boot prints both the manufacturer ID and device as "0x0" so, clearly, it's not picking that up properly. can anyone suggest what the proper u-boot configuration selections should be for that particular flash? rday -- ======================================================================== Robert P. J. Day Ottawa, Ontario, CANADA http://crashcourse.ca Twitter: http://twitter.com/rpjday LinkedIn: http://ca.linkedin.com/in/rpjday ========================================================================

1 0

[U-Boot] [PATCH v6 00/16] device model bring-up of ti-qspi on dra72, dra74 and am437x-sk evm
by Mugunthan V N 23 Dec '15

23 Dec '15

This patch series enables ti_qspi to adopt driver model. This has been tested on dra72, dra74 and am437x-sk evms (logs [1]). Also pushed a branch for testing [2] This patch series is based on u-boot-spi/next and a fix for Macronix flash Quad Enable as per the comments in thread [3]. [1]: http://pastebin.ubuntu.com/14164638/ [2]: git://git.ti.com/~mugunthanvnm/ti-u-boot/mugunth-ti-u-boot.git dm-qspi-v6 Changes from v5->v6: * Removed adding flash compatibles to flash driver and added "spi-flash" compatible to dts as done by other flash devices. Changes from v4->v5: * Adopt to latest spi framework changes by Jagan [3] and [4] [3]: http://permalink.gmane.org/gmane.comp.boot-loaders.u-boot/245039 [4]: https://www.mail-archive.com/u-boot@lists.denx.de/msg196464.html Changes from v3->v4: * used op_mode_{t/r}x to hold flash tx/rx modes. Changes from v2->v3: * removed usage of spi_slave structure in driver model and introduced required variables in qspi priv itself. * Used fdt_addr_cells() and fdt_size_cells() instead of hard-coding size of each address-size pair. * Changed qspi dts entries to be same as in kernel qspi dts patch for avoiding future conflicts. * Fixed some typos and added more info in commits. * Added error check on chip select passed from framework. * Removed un-used define QSPI_RD_DUAL. Changes from Initial version: * Split "prepare driver for DM conversion" for easier review * added memory map mode to the driver * Fixed the cosmetic reviews from Simon * Modified the dev_get_addr_index to adopt OF_TRANSULATE as well and also removed code duplicate. * Added compatibles for spi flashed found in DRA7xx and AM437x SK Mugunthan V N (16): drivers: spi:ti_qspi: change ti_qspi_slave to ti_qspi_priv for driver model conversion drivers: spi: ti_qspi: prepare driver for DM conversion dm: core: Add a new api to get indexed device address spi: Add support for dual and quad mode dra7xx_evm: qspi: do not define DM_SPI and DM_SPI_FLASH for spl dts: dra7: add spi alias for qspi drivers: spi: ti_qspi: convert driver to adopt device driver model arm: dts: dra7: add qspi register maps for memory map and control module arm: dts: am437x-gp-evm: add spi-flash comaptible for flash arm: dts: dra7-evm: add spi-flash comaptible for flash arm: dts: dra72-evm: add spi-flash comaptible for flash defconfig: dra72_evm: enable spi driver model defconfig: dra74_evm: enable spi driver model am43xx_evm: qspi: do not define DM_SPI and DM_SPI_FLASH for spl arm: dts: am4372: add qspi register maps for memory map defconfig: am437x_sk_evm: enable spi driver model arch/arm/dts/am4372.dtsi | 5 +- arch/arm/dts/am437x-sk-evm.dts | 2 +- arch/arm/dts/dra7-evm.dts | 2 +- arch/arm/dts/dra7.dtsi | 8 +- arch/arm/dts/dra72-evm.dts | 2 +- configs/am437x_sk_evm_defconfig | 3 + configs/dra72_evm_defconfig | 2 + configs/dra74_evm_defconfig | 2 + drivers/core/device.c | 31 ++- drivers/spi/spi-uclass.c | 31 +++ drivers/spi/ti_qspi.c | 522 ++++++++++++++++++++++++++++------------ include/configs/am43xx_evm.h | 2 + include/configs/dra7xx_evm.h | 5 + include/dm/device.h | 11 + include/spi.h | 4 + 15 files changed, 468 insertions(+), 164 deletions(-) -- 2.7.0.rc1.5.gf3adf45

1 17

[U-Boot] [PATCH 0/7] Determine Boot mode at run time for ARM
by Aneesh Bansal 23 Dec '15

23 Dec '15

For ARM based SoC's there is no need to add a separate target/defconfig for Secure Boot. Boot Mode can be determined at run time to continue the chain of trust. The patch set is dependent on following: http://patchwork.ozlabs.org/patch/560391/ http://patchwork.ozlabs.org/patch/553826/ Aneesh Bansal (7): include/configs: make secure boot header file include uniform include/configs: move definition of CONFIG_CMD_BLOB SECURE_BOOT: split the secure boot functionality in two parts create function to determine boot mode enable chain of trust for ARM platforms enable chain of trust for PowerPC platforms SECURE_BOOT: change error handler for esbc_validate arch/arm/cpu/armv8/fsl-layerscape/soc.c | 4 + .../include/asm/arch-fsl-layerscape/immap_lsch2.h | 3 + arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h | 2 + arch/arm/include/asm/fsl_secure_boot.h | 7 +- arch/powerpc/cpu/mpc85xx/cpu_init.c | 12 +++ arch/powerpc/include/asm/fsl_secure_boot.h | 39 ++++--- arch/powerpc/include/asm/immap_85xx.h | 3 + board/freescale/common/Makefile | 3 +- board/freescale/common/cmd_esbc_validate.c | 7 +- board/freescale/common/fsl_chain_of_trust.c | 70 +++++++++++++ board/freescale/common/fsl_validate.c | 7 ++ board/freescale/ls1021aqds/ls1021aqds.c | 4 + board/freescale/ls1021atwr/ls1021atwr.c | 4 + configs/ls1021aqds_nor_SECURE_BOOT_defconfig | 7 -- configs/ls1021atwr_nor_SECURE_BOOT_defconfig | 7 -- configs/ls1043ardb_SECURE_BOOT_defconfig | 9 -- include/config_fsl_chain_trust.h | 89 ++++++++++++++++ include/config_fsl_secboot.h | 116 --------------------- include/configs/B4860QDS.h | 4 - include/configs/BSC9132QDS.h | 4 - include/configs/P1010RDB.h | 4 - include/configs/P2041RDB.h | 4 - include/configs/T102xQDS.h | 10 +- include/configs/T102xRDB.h | 10 +- include/configs/T1040QDS.h | 3 - include/configs/T104xRDB.h | 3 - include/configs/T208xQDS.h | 4 - include/configs/T208xRDB.h | 4 - include/configs/T4240QDS.h | 4 - include/configs/T4240RDB.h | 9 -- include/configs/corenet_ds.h | 4 - include/configs/ls1021aqds.h | 8 +- include/configs/ls1021atwr.h | 8 +- include/configs/ls1043a_common.h | 8 ++ include/configs/ls1043aqds.h | 10 ++ include/configs/ls1043ardb.h | 12 +-- include/fsl_validate.h | 2 + 37 files changed, 287 insertions(+), 221 deletions(-) create mode 100644 board/freescale/common/fsl_chain_of_trust.c delete mode 100644 configs/ls1021aqds_nor_SECURE_BOOT_defconfig delete mode 100644 configs/ls1021atwr_nor_SECURE_BOOT_defconfig delete mode 100644 configs/ls1043ardb_SECURE_BOOT_defconfig create mode 100644 include/config_fsl_chain_trust.h delete mode 100644 include/config_fsl_secboot.h -- 1.8.1.4

1 7

[U-Boot] [PATCH] arm: socfpga: Fix i2c mux on cyclone5-socdk board
by Chin Liang See 23 Dec '15

23 Dec '15

Updated pinmux group GENERALIO[15-16] for i2c. Signed-off-by: Chin Liang See <clsee(a)altera.com> Cc: Dinh Nguyen <dinguyen(a)opensource.altera.com> Cc: Dinh Nguyen <dinh.linux(a)gmail.com> Cc: Pavel Machek <pavel(a)denx.de> Cc: Marek Vasut <marex(a)denx.de> Cc: Stefan Roese <sr(a)denx.de> Cc: shengjiangwu <shengjiangwu(a)icloud.com> --- board/altera/cyclone5-socdk/qts/pinmux_config.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/board/altera/cyclone5-socdk/qts/pinmux_config.h b/board/altera/cyclone5-socdk/qts/pinmux_config.h index 7819ad0..f1e6d2b 100644 --- a/board/altera/cyclone5-socdk/qts/pinmux_config.h +++ b/board/altera/cyclone5-socdk/qts/pinmux_config.h @@ -55,8 +55,8 @@ const u8 sys_mgr_init_table[] = { 0, /* GENERALIO12 */ 2, /* GENERALIO13 */ 2, /* GENERALIO14 */ - 0, /* GENERALIO15 */ - 0, /* GENERALIO16 */ + 3, /* GENERALIO15 */ + 3, /* GENERALIO16 */ 2, /* GENERALIO17 */ 2, /* GENERALIO18 */ 0, /* GENERALIO19 */ -- 1.9.2.468.g3f0c02a

1 0

[U-Boot] [PATCH v5 00/16] device model bring-up of ti-qspi on dra72, dra74 and am437x-sk evm
by Mugunthan V N 23 Dec '15

23 Dec '15

This patch series enables ti_qspi to adopt driver model. This has been tested on dra72, dra74 and am437x-sk evms (logs [1]). Also pushed a branch for testing [2] This patch series is based on u-boot-spi/next and a fix for Macronix flash Quad Enable as per the comments in thread [3]. [1]: http://pastebin.ubuntu.com/14160996/ [2]: git://git.ti.com/~mugunthanvnm/ti-u-boot/mugunth-ti-u-boot.git dm-qspi-v5 Changes from v4->v5 * Adopt to latest spi framework changes by Jagan [3] and [4] [3]: http://permalink.gmane.org/gmane.comp.boot-loaders.u-boot/245039 [4]: https://www.mail-archive.com/u-boot@lists.denx.de/msg196464.html Changes from v3->v4: * used op_mode_{t/r}x to hold flash tx/rx modes. Changes from v2->v3: * removed usage of spi_slave structure in driver model and introduced required variables in qspi priv itself. * Used fdt_addr_cells() and fdt_size_cells() instead of hard-coding size of each address-size pair. * Changed qspi dts entries to be same as in kernel qspi dts patch for avoiding future conflicts. * Fixed some typos and added more info in commits. * Added error check on chip select passed from framework. * Removed un-used define QSPI_RD_DUAL. Changes from Initial version: * Split "prepare driver for DM conversion" for easier review * added memory map mode to the driver * Fixed the cosmetic reviews from Simon * Modified the dev_get_addr_index to adopt OF_TRANSULATE as well and also removed code duplicate. * Added compatibles for spi flashed found in DRA7xx and AM437x SK Mugunthan V N (16): drivers: spi: ti_qspi: do not hard code chip select for memory map configuration drivers: spi:ti_qspi: change ti_qspi_slave to ti_qspi_priv for driver model conversion drivers: spi: ti_qspi: prepare driver for DM conversion dm: core: Add a new api to get indexed device address spi: Add support for dual and quad mode dra7xx_evm: qspi: do not define DM_SPI and DM_SPI_FLASH for spl dts: dra7: add spi alias for qspi drivers: spi: ti_qspi: convert driver to adopt device driver model arm: dts: dra7: add qspi register maps for memory map and control module drivers: mtd: spi: sf_probe: add compatible for spansion spi flash drivers: mtd: spi: sf_probe: add compatible for Macronix spi flash defconfig: dra72_evm: enable spi driver model defconfig: dra74_evm: enable spi driver model am43xx_evm: qspi: do not define DM_SPI and DM_SPI_FLASH for spl arm: dts: am4372: add qspi register maps for memory map defconfig: am437x_sk_evm: enable spi driver model arch/arm/dts/am4372.dtsi | 5 +- arch/arm/dts/dra7.dtsi | 8 +- configs/am437x_sk_evm_defconfig | 3 + configs/dra72_evm_defconfig | 2 + configs/dra74_evm_defconfig | 2 + drivers/core/device.c | 31 ++- drivers/mtd/spi/sf_probe.c | 2 + drivers/spi/spi-uclass.c | 31 +++ drivers/spi/ti_qspi.c | 524 ++++++++++++++++++++++++++++------------ include/configs/am43xx_evm.h | 2 + include/configs/dra7xx_evm.h | 5 + include/dm/device.h | 11 + include/spi.h | 4 + 13 files changed, 468 insertions(+), 162 deletions(-) -- 2.7.0.rc1.5.gf3adf45

2 20

[U-Boot] [PATCH v2] cmd_boot: Add a poweroff command
by Hans de Goede 23 Dec '15

23 Dec '15

From: Michael van Slingerland <michael(a)deviousops.nl> Add a 'poweroff' command to boot commands, this only gets enabled if the board Kconfig does a "select CMD_POWEROFF". Signed-off-by: Michael van Slingerland <michael(a)deviousops.nl> [hdegoede(a)redhat.com: Make the cmd conditional on a CMD_POWEROFF Kconfig] Signed-off-by: Hans de Goede <hdegoede(a)redhat.com> --- Changes in v2: -Improve poweroff help text -Remove unnecessary #ifdef from command.h --- common/Kconfig | 3 +++ common/cmd_boot.c | 8 ++++++++ include/command.h | 1 + 3 files changed, 12 insertions(+) diff --git a/common/Kconfig b/common/Kconfig index ccf5475..9d446bf 100644 --- a/common/Kconfig +++ b/common/Kconfig @@ -184,6 +184,9 @@ config CMD_XIMG help Extract a part of a multi-image. +config CMD_POWEROFF + bool + endmenu menu "Environment commands" diff --git a/common/cmd_boot.c b/common/cmd_boot.c index 8f2e070..72f2cf3 100644 --- a/common/cmd_boot.c +++ b/common/cmd_boot.c @@ -61,3 +61,11 @@ U_BOOT_CMD( "Perform RESET of the CPU", "" ); + +#ifdef CONFIG_CMD_POWEROFF +U_BOOT_CMD( + poweroff, 1, 0, do_poweroff, + "Perform POWEROFF of the device", + "" +); +#endif diff --git a/include/command.h b/include/command.h index 2ae9b6c..0524c0b 100644 --- a/include/command.h +++ b/include/command.h @@ -110,6 +110,7 @@ extern int common_diskboot(cmd_tbl_t *cmdtp, const char *intf, int argc, char *const argv[]); extern int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]); +extern int do_poweroff(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]); /* * Error codes that commands return to cmd_process(). We use the standard 0 -- 2.5.0

2 2