May 2014 - U-Boot

[U-Boot] [PATCH] arm, davinci: Use CONFIG_SPL_PAD_TO for padding the SPL in an ais image
by Christian Riesch 14 May '14

14 May '14

The commits commit b7b5f1a16ca66dfdd817e7339f0e263a5b9f2758 Author: Albert ARIBAUD <albert.u.boot(a)aribaud.net> da850evm, da850_am18xxevm: convert to CONFIG_SPL_MAX_FOOTPRINT and commit e7497891e34efe5cb2b3a3dc7c6c096c012ede28 Author: Albert ARIBAUD <albert.u.boot(a)aribaud.net> cam_enc_4xx: convert to CONFIG_SPL_MAX_FOOTPRINT replaced CONFIG_SPL_MAX_SIZE by CONFIG_SPL_MAX_FOOTPRINT. However, CONFIG_SPL_MAX_SIZE is used in the Makefile for padding the SPL when preparing an u-boot.ais image. By removing CONFIG_SPL_MAX_SIZE said commits broke the ais image of the da850evm and cam_enc_4xx configurations. This patch converts the u-boot.ais target to use CONFIG_SPL_PAD_TO instead of CONFIG_SPL_MAX_SIZE for padding the SPL and adds a #define CONFIG_SPL_PAD_TO where it is required. Signed-off-by: Christian Riesch <christian.riesch(a)omicron.at> Reported-by: Tom Taylor <ttaylor.tampa(a)gmail.com> Cc: Sudhakar Rajashekhara <sudhakar.raj(a)ti.com> Cc: Heiko Schocher <hs(a)denx.de> Cc: Albert ARIBAUD <albert.u.boot(a)aribaud.net> --- Sent again since date was wrong in my earlier email. Sorry for that. Christian Makefile | 2 +- include/configs/da850evm.h | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/Makefile b/Makefile index ff38a43..869f442 100644 --- a/Makefile +++ b/Makefile @@ -890,7 +890,7 @@ MKIMAGEFLAGS_u-boot-spl.ais = -s -n $(if $(CONFIG_AIS_CONFIG_FILE), \ spl/u-boot-spl.ais: spl/u-boot-spl.bin FORCE $(call if_changed,mkimage) -OBJCOPYFLAGS_u-boot.ais = -I binary -O binary --pad-to=$(CONFIG_SPL_MAX_SIZE) +OBJCOPYFLAGS_u-boot.ais = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) u-boot.ais: spl/u-boot-spl.ais u-boot.img FORCE $(call if_changed,pad_cat) diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h index 509fe20..0ca0c8d 100644 --- a/include/configs/da850evm.h +++ b/include/configs/da850evm.h @@ -386,6 +386,7 @@ #define CONFIG_SPL_STACK 0x8001ff00 #define CONFIG_SPL_TEXT_BASE 0x80000000 #define CONFIG_SPL_MAX_FOOTPRINT 32768 +#define CONFIG_SPL_PAD_TO 32768 #endif /* Load U-Boot Image From MMC */ -- 1.7.9.5

2 1

[U-Boot] [PATCH 0/2] siemens: rename board dxr2 to draco and add target draco
by Samuel Egli 14 May '14

14 May '14

These two patches rename board dxr2 to draco and add new target draco with new MACH_TYPE. New target (patch 2) depends on renaming (patch 1). Samuel Egli (2): siemens:cosmetic, dxr2: rename dxr2 to draco siemens, draco: add new target board/siemens/{dxr2 => draco}/Makefile | 0 board/siemens/{dxr2 => draco}/board.c | 71 ++++++++++++------------ board/siemens/{dxr2 => draco}/board.h | 2 +- board/siemens/{dxr2 => draco}/mux.c | 2 +- boards.cfg | 3 +- include/configs/draco.h | 92 ++++++++++++++++++++++++++++++++ 6 files changed, 131 insertions(+), 39 deletions(-) rename board/siemens/{dxr2 => draco}/Makefile (100%) rename board/siemens/{dxr2 => draco}/board.c (77%) rename board/siemens/{dxr2 => draco}/board.h (98%) rename board/siemens/{dxr2 => draco}/mux.c (99%) create mode 100644 include/configs/draco.h -- 1.7.10.4

2 4

[U-Boot] [PATCH 2/2] omap3_beagle: xM A/B validate new dtb exits in file system
by robertcnelson 14 May '14

14 May '14

From: Robert Nelson <robertcnelson(a)gmail.com> Fall back to previous dtb used when omap3-beagle-xm-ab.dtb doesn't exist in file system Signed-off-by: Robert Nelson <robertcnelson(a)gmail.com> CC: Tom Rini <trini(a)ti.com> CC: Nishanth Menon <nm(a)ti.com> --- include/configs/omap3_beagle.h | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index a1d38ff..06b9006 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -248,6 +248,12 @@ "setenv fdtfile omap3-beagle-xm.dtb; fi; " \ "if test $fdtfile = undefined; then " \ "echo WARNING: Could not determine device tree to use; fi; \0" \ + "validatefdt=" \ + "if test $beaglerev = xMAB; then " \ + "if test ! -e mmc ${bootpart} ${bootdir}/${fdtfile}; then " \ + "setenv fdtfile omap3-beagle-xm.dtb; " \ + "fi; " \ + "fi; \0" \ "bootenv=uEnv.txt\0" \ "loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \ "importbootenv=echo Importing environment from mmc ...; " \ @@ -263,7 +269,7 @@ "rootfstype=${ramrootfstype}\0" \ "loadramdisk=load mmc ${bootpart} ${rdaddr} ${bootdir}/${ramdisk}\0" \ "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \ - "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \ + "loadfdt=run validatefdt; load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \ "mmcboot=echo Booting from mmc ...; " \ "run mmcargs; " \ "bootm ${loadaddr}\0" \ -- 1.9.2

3 3

[U-Boot] [PATCH 1/2] omap3_beagle: use omap3-beagle-xm-ab.dtb for the xM AB revision
by robertcnelson 14 May '14

14 May '14

From: Robert Nelson <robertcnelson(a)gmail.com> As of v3.15-rc3, omap3-beagle-xm-ab.dtb now exists with the usb hub (ehci) enabled. For older kernels versions, cherry pick from mainline: ef78f3869c37c480f1d58462a760a40dabc823f4 Signed-off-by: Robert Nelson <robertcnelson(a)gmail.com> CC: Tom Rini <trini(a)ti.com> CC: Nishanth Menon <nm(a)ti.com> --- include/configs/omap3_beagle.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index 0b57421..a1d38ff 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -243,7 +243,7 @@ "if test $beaglerev = C4; then " \ "setenv fdtfile omap3-beagle.dtb; fi; " \ "if test $beaglerev = xMAB; then " \ - "setenv fdtfile omap3-beagle-xm.dtb; fi; " \ + "setenv fdtfile omap3-beagle-xm-ab.dtb; fi; " \ "if test $beaglerev = xMC; then " \ "setenv fdtfile omap3-beagle-xm.dtb; fi; " \ "if test $fdtfile = undefined; then " \ -- 1.9.2

2 1

[U-Boot] [PATCH] mtd: nand: omap_gpmc: Fix update of read_ecc in oob
by Marek Belisko 14 May '14

14 May '14

We need to flip only one bit not assign. Signed-off-by: Marek Belisko <marek.belisko(a)gmail.com> --- drivers/mtd/nand/omap_gpmc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mtd/nand/omap_gpmc.c b/drivers/mtd/nand/omap_gpmc.c index 881a636..bf99b8e 100644 --- a/drivers/mtd/nand/omap_gpmc.c +++ b/drivers/mtd/nand/omap_gpmc.c @@ -403,7 +403,7 @@ static int omap_correct_data_bch(struct mtd_info *mtd, uint8_t *dat, dat[byte_pos] ^= 1 << bit_pos; printf("nand: bit-flip corrected @data=%d\n", byte_pos); } else if (byte_pos < error_max) { - read_ecc[byte_pos - SECTOR_BYTES] = 1 << bit_pos; + read_ecc[byte_pos - SECTOR_BYTES] ^= 1 << bit_pos; printf("nand: bit-flip corrected @oob=%d\n", byte_pos - SECTOR_BYTES); } else { -- 1.7.9.5

3 2

[U-Boot] [PATCH 0/5] siemens: update and cleanup code
by Samuel Egli 14 May '14

14 May '14

This patch series provides a general update and clean up for siemens boards. * Update DDR3 settings for dxr2 board. Provide DDR3 software leveling parameters for new engineering samples * Add more flexible control of LEDs * Cosmetic changes in dxr2 and pxm2 Samuel Egli (5): siemens: cosmetic: remove unused and rename defines siemens: update DDR3 parameters for dxr2 siemens: add led cmd for flexible LED control siemens: change LED indication in DFU mode siemens: cosmetic: rename project_dir board/siemens/common/board.c | 46 +++++++++++++++++++++++++++----- board/siemens/dxr2/board.c | 41 +++++++++++++++++++--------- board/siemens/dxr2/board.h | 24 +++++++++-------- board/siemens/pxm2/board.c | 10 +++---- include/configs/dxr2.h | 4 +-- include/configs/pxm2.h | 2 +- include/configs/siemens-am33x-common.h | 8 ++++-- 7 files changed, 96 insertions(+), 39 deletions(-) -- 1.7.10.4

2 10

[U-Boot] [PATCH v2] am33xx: add SSC enable macro
by Yegor Yefremov 14 May '14

14 May '14

Signed-off-by: Yegor Yefremov <yegorslists(a)googlemail.com> --- Changes: v2: use CM_CLKMODE_DPLL_SSC_EN_MASK in board file of Siemens device arch/arm/include/asm/arch-am33xx/clock.h | 2 ++ board/siemens/rut/board.c | 2 +- 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/arm/include/asm/arch-am33xx/clock.h b/arch/arm/include/asm/arch-am33xx/clock.h index 7637457..f00fad3 100644 --- a/arch/arm/include/asm/arch-am33xx/clock.h +++ b/arch/arm/include/asm/arch-am33xx/clock.h @@ -42,6 +42,8 @@ #define MODULE_CLKCTRL_IDLEST_DISABLED 3 /* CM_CLKMODE_DPLL */ +#define CM_CLKMODE_DPLL_SSC_EN_SHIFT 12 +#define CM_CLKMODE_DPLL_SSC_EN_MASK (1 << 12) #define CM_CLKMODE_DPLL_REGM4XEN_SHIFT 11 #define CM_CLKMODE_DPLL_REGM4XEN_MASK (1 << 11) #define CM_CLKMODE_DPLL_LPMODE_EN_SHIFT 10 diff --git a/board/siemens/rut/board.c b/board/siemens/rut/board.c index e0ada3f..1752df2 100644 --- a/board/siemens/rut/board.c +++ b/board/siemens/rut/board.c @@ -400,7 +400,7 @@ static int conf_disp_pll(int m, int n) #if defined(DISPL_PLL_SPREAD_SPECTRUM) writel(0x64, &cmwkup->resv6[3]); /* 0x50 */ writel(0x800, &cmwkup->resv6[2]); /* 0x4c */ - writel(readl(&cmwkup->clkmoddplldisp) | (1 << 12), + writel(readl(&cmwkup->clkmoddplldisp) | CM_CLKMODE_DPLL_SSC_EN_MASK, &cmwkup->clkmoddplldisp); /* 0x98 */ #endif return 0; -- 1.8.3.2

2 1

[U-Boot] [PATCH] omap4: duovero: Add Gumstix DuoVero machine.
by Ash Charles 14 May '14

14 May '14

This adds the Gumstix DuoVero machine [1]. This is a OMAP4430-based computer-on-module (COM aka SOM) that can be mounted on various expansion boards with different peripherals. [1] https://store.gumstix.com/index.php/category/43/ Signed-off-by: Ash Charles <ash(a)gumstix.com> Cc: Tom Rini <trini(a)ti.com> --- board/gumstix/duovero/Makefile | 8 + board/gumstix/duovero/duovero.c | 264 +++++++++++++++++++++++++++++++ board/gumstix/duovero/duovero_mux_data.h | 199 +++++++++++++++++++++++ boards.cfg | 1 + include/configs/duovero.h | 62 ++++++++ include/configs/ti_omap4_common.h | 9 ++ 6 files changed, 543 insertions(+) create mode 100644 board/gumstix/duovero/Makefile create mode 100644 board/gumstix/duovero/duovero.c create mode 100644 board/gumstix/duovero/duovero_mux_data.h create mode 100644 include/configs/duovero.h diff --git a/board/gumstix/duovero/Makefile b/board/gumstix/duovero/Makefile new file mode 100644 index 0000000..f738c58 --- /dev/null +++ b/board/gumstix/duovero/Makefile @@ -0,0 +1,8 @@ +# +# (C) Copyright 2000, 2001, 2002 +# Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y := duovero.o diff --git a/board/gumstix/duovero/duovero.c b/board/gumstix/duovero/duovero.c new file mode 100644 index 0000000..8409af1 --- /dev/null +++ b/board/gumstix/duovero/duovero.c @@ -0,0 +1,264 @@ +/* + * (C) Copyright 2013 + * Gumstix Inc. <www.gumstix.com> + * Maintainer: Ash Charles <ash(a)gumstix.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#include <common.h> +#include <netdev.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/mmc_host_def.h> +#include <twl6030.h> +#include <asm/emif.h> +#include <asm/arch/clock.h> +#include <asm/arch/gpio.h> +#include <asm/gpio.h> + +#include "duovero_mux_data.h" + +#define WIFI_EN 43 + +#if defined(CONFIG_CMD_NET) +#define SMSC_NRESET 45 +static void setup_net_chip(void); +#endif + +#ifdef CONFIG_USB_EHCI +#include <usb.h> +#include <asm/arch/ehci.h> +#include <asm/ehci-omap.h> +#endif + +DECLARE_GLOBAL_DATA_PTR; + +const struct omap_sysinfo sysinfo = { + "Board: duovero\n" +}; + +struct omap4_scrm_regs *const scrm = (struct omap4_scrm_regs *)0x4a30a000; + +/** + * @brief board_init + * + * @return 0 + */ +int board_init(void) +{ + gpmc_init(); + + gd->bd->bi_arch_number = MACH_TYPE_OMAP4_DUOVERO; + gd->bd->bi_boot_params = (0x80000000 + 0x100); /* boot param addr */ + + return 0; +} + +/** + * @brief misc_init_r - Configure board specific configurations + * such as power configurations, ethernet initialization as phase2 of + * boot sequence + * + * @return 0 + */ +int misc_init_r(void) +{ + int ret = 0; + u8 val; + + /* wifi setup: first enable 32Khz clock from 6030 pmic */ + val = 0xe1; + ret = i2c_write(TWL6030_CHIP_PM, 0xbe, 1, &val, 1); + if (ret) + printf("Failed to enable 32Khz clock to wifi module\n"); + + /* then setup WIFI_EN as an output pin and send reset pulse */ + if (!gpio_request(WIFI_EN, "")) { + gpio_direction_output(WIFI_EN, 0); + gpio_set_value(WIFI_EN, 1); + udelay(1); + gpio_set_value(WIFI_EN, 0); + udelay(1); + gpio_set_value(WIFI_EN, 1); + } + +#if defined(CONFIG_CMD_NET) + setup_net_chip(); +#endif + return 0; +} + +void set_muxconf_regs_essential(void) +{ + do_set_mux((*ctrl)->control_padconf_core_base, + core_padconf_array_essential, + sizeof(core_padconf_array_essential) / + sizeof(struct pad_conf_entry)); + + do_set_mux((*ctrl)->control_padconf_wkup_base, + wkup_padconf_array_essential, + sizeof(wkup_padconf_array_essential) / + sizeof(struct pad_conf_entry)); + + do_set_mux((*ctrl)->control_padconf_core_base, + core_padconf_array_non_essential, + sizeof(core_padconf_array_non_essential) / + sizeof(struct pad_conf_entry)); + + do_set_mux((*ctrl)->control_padconf_wkup_base, + wkup_padconf_array_non_essential, + sizeof(wkup_padconf_array_non_essential) / + sizeof(struct pad_conf_entry)); +} + +#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_GENERIC_MMC) +int board_mmc_init(bd_t *bis) +{ + return omap_mmc_init(0, 0, 0, -1, -1); +} +#endif + + +#if defined(CONFIG_CMD_NET) + +#define GPMC_SIZE_16M 0xF +#define GPMC_BASEADDR_MASK 0x3F +#define GPMC_CS_ENABLE 0x1 + +void enable_gpmc_cs_config(const u32 *gpmc_config, struct gpmc_cs *cs, u32 base, + u32 size) +{ + writel(0, &cs->config7); + sdelay(1000); + /* Delay for settling */ + writel(gpmc_config[0], &cs->config1); + writel(gpmc_config[1], &cs->config2); + writel(gpmc_config[2], &cs->config3); + writel(gpmc_config[3], &cs->config4); + writel(gpmc_config[4], &cs->config5); + writel(gpmc_config[5], &cs->config6); + + /* + * Enable the config. size is the CS size and goes in + * bits 11:8. We set bit 6 to enable this CS and the base + * address goes into bits 5:0. + */ + writel((size << 8) | (GPMC_CS_ENABLE << 6) | + ((base >> 24) & GPMC_BASEADDR_MASK), + &cs->config7); + + sdelay(2000); +} + +/* GPMC CS configuration for an SMSC LAN9221 ethernet controller */ +#define NET_LAN9221_GPMC_CONFIG1 0x2a001203 +#define NET_LAN9221_GPMC_CONFIG2 0x000a0a02 +#define NET_LAN9221_GPMC_CONFIG3 0x00020200 +#define NET_LAN9221_GPMC_CONFIG4 0x0a030a03 +#define NET_LAN9221_GPMC_CONFIG5 0x000a0a0a +#define NET_LAN9221_GPMC_CONFIG6 0x8a070707 +#define NET_LAN9221_GPMC_CONFIG7 0x00000f6c + +/* GPMC definitions for LAN9221 chips on expansion boards */ +static const u32 gpmc_lan_config[] = { + NET_LAN9221_GPMC_CONFIG1, + NET_LAN9221_GPMC_CONFIG2, + NET_LAN9221_GPMC_CONFIG3, + NET_LAN9221_GPMC_CONFIG4, + NET_LAN9221_GPMC_CONFIG5, + NET_LAN9221_GPMC_CONFIG6, + /*CONFIG7- computed as params */ +}; + +/* + * Routine: setup_net_chip + * Description: Setting up the configuration GPMC registers specific to the + * Ethernet hardware. + */ +static void setup_net_chip(void) +{ + enable_gpmc_cs_config(gpmc_lan_config, &gpmc_cfg->cs[5], 0x2C000000, + GPMC_SIZE_16M); + + /* Make GPIO SMSC_NRESET as output pin and send reset pulse */ + if (!gpio_request(SMSC_NRESET, "")) { + gpio_direction_output(SMSC_NRESET, 0); + gpio_set_value(SMSC_NRESET, 1); + udelay(1); + gpio_set_value(SMSC_NRESET, 0); + udelay(1); + gpio_set_value(SMSC_NRESET, 1); + } +} +#endif + +int board_eth_init(bd_t *bis) +{ + int rc = 0; +#ifdef CONFIG_SMC911X + rc = smc911x_initialize(0, CONFIG_SMC911X_BASE); +#endif + return rc; +} + +#ifdef CONFIG_USB_EHCI + +static struct omap_usbhs_board_data usbhs_bdata = { + .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, +}; + +int ehci_hcd_init(int index, enum usb_init_type init, + struct ehci_hccr **hccr, struct ehci_hcor **hcor) +{ + int ret; + unsigned int utmi_clk; + u32 auxclk, altclksrc; + + /* Now we can enable our port clocks */ + utmi_clk = readl((void *)CM_L3INIT_HSUSBHOST_CLKCTRL); + utmi_clk |= HSUSBHOST_CLKCTRL_CLKSEL_UTMI_P1_MASK; + sr32((void *)CM_L3INIT_HSUSBHOST_CLKCTRL, 0, 32, utmi_clk); + + auxclk = readl(&scrm->auxclk3); + /* Select sys_clk */ + auxclk &= ~AUXCLK_SRCSELECT_MASK; + auxclk |= AUXCLK_SRCSELECT_SYS_CLK << AUXCLK_SRCSELECT_SHIFT; + /* Set the divisor to 2 */ + auxclk &= ~AUXCLK_CLKDIV_MASK; + auxclk |= AUXCLK_CLKDIV_2 << AUXCLK_CLKDIV_SHIFT; + /* Request auxilary clock #3 */ + auxclk |= AUXCLK_ENABLE_MASK; + writel(auxclk, &scrm->auxclk3); + + altclksrc = readl(&scrm->altclksrc); + + /* Activate alternate system clock supplier */ + altclksrc &= ~ALTCLKSRC_MODE_MASK; + altclksrc |= ALTCLKSRC_MODE_ACTIVE; + + /* enable clocks */ + altclksrc |= ALTCLKSRC_ENABLE_INT_MASK | ALTCLKSRC_ENABLE_EXT_MASK; + + writel(altclksrc, &scrm->altclksrc); + + ret = omap_ehci_hcd_init(index, &usbhs_bdata, hccr, hcor); + if (ret < 0) + return ret; + + return 0; +} + +int ehci_hcd_stop(int index) +{ + return omap_ehci_hcd_stop(); +} +#endif + +/* + * get_board_rev() - get board revision + */ +u32 get_board_rev(void) +{ + return 0x20; +} diff --git a/board/gumstix/duovero/duovero_mux_data.h b/board/gumstix/duovero/duovero_mux_data.h new file mode 100644 index 0000000..1be247b --- /dev/null +++ b/board/gumstix/duovero/duovero_mux_data.h @@ -0,0 +1,199 @@ +/* + * (C) Copyright 2012 + * Gumstix Incorporated, <www.gumstix.com> + * Maintainer: Ash Charles <ash(a)gumstix.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#ifndef _DUOVERO_MUX_DATA_H_ +#define _DUOVERO_MUX_DATA_H_ + +#include <asm/arch/mux_omap4.h> + +const struct pad_conf_entry core_padconf_array_essential[] = { + {SDMMC1_CLK, (PTU | OFF_EN | OFF_OUT_PTD | M0)}, /* sdmmc1_clk */ + {SDMMC1_CMD, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_cmd */ + {SDMMC1_DAT0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat0 */ + {SDMMC1_DAT1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat1 */ + {SDMMC1_DAT2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat2 */ + {SDMMC1_DAT3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat3 */ + {I2C1_SCL, (PTU | IEN | M0)}, /* i2c1_scl */ + {I2C1_SDA, (PTU | IEN | M0)}, /* i2c1_sda */ + {I2C2_SCL, (PTU | IEN | M0)}, /* i2c2_scl */ + {I2C2_SDA, (PTU | IEN | M0)}, /* i2c2_sda */ + {I2C3_SCL, (PTU | IEN | M0)}, /* i2c3_scl */ + {I2C3_SDA, (PTU | IEN | M0)}, /* i2c3_sda */ + {I2C4_SCL, (PTU | IEN | M0)}, /* i2c4_scl */ + {I2C4_SDA, (PTU | IEN | M0)}, /* i2c4_sda */ + {UART3_CTS_RCTX, (PTU | IEN | M0)}, /* uart3_tx */ + {UART3_RTS_SD, (M0)}, /* uart3_rts_sd */ + {UART3_RX_IRRX, (PTU | IEN | M0)}, /* uart3_rx */ + {UART3_TX_IRTX, (M0)} /* uart3_tx */ +}; + +const struct pad_conf_entry wkup_padconf_array_essential[] = { + {PAD1_SR_SCL, (PTU | IEN | M0)}, /* sr_scl */ + {PAD0_SR_SDA, (PTU | IEN | M0)}, /* sr_sda */ + {PAD1_SYS_32K, (IEN | M0)} /* sys_32k */ +}; + +const struct pad_conf_entry core_padconf_array_non_essential[] = { + {GPMC_AD0, (PTU | IEN | M0)}, /* gpmc_ad0 */ + {GPMC_AD1, (PTU | IEN | M0)}, /* gpmc_ad1 */ + {GPMC_AD2, (PTU | IEN | M0)}, /* gpmc_ad2 */ + {GPMC_AD3, (PTU | IEN | M0)}, /* gpmc_ad3 */ + {GPMC_AD4, (PTU | IEN | M0)}, /* gpmc_ad4 */ + {GPMC_AD5, (PTU | IEN | M0)}, /* gpmc_ad5 */ + {GPMC_AD6, (PTU | IEN | M0)}, /* gpmc_ad6 */ + {GPMC_AD7, (PTU | IEN | M0)}, /* gpmc_ad7 */ + {GPMC_AD8, (PTU | IEN | M0)}, /* gpmc_ad8 */ + {GPMC_AD9, (PTU | IEN | M0)}, /* gpmc_ad9 */ + {GPMC_AD10, (PTU | IEN | M0)}, /* gpmc_ad10 */ + {GPMC_AD11, (PTU | IEN | M0)}, /* gpmc_ad11 */ + {GPMC_AD12, (PTU | IEN | M0)}, /* gpmc_ad12 */ + {GPMC_AD13, (PTU | IEN | M0)}, /* gpmc_ad13 */ + {GPMC_AD14, (PTU | IEN | M0)}, /* gpmc_ad14 */ + {GPMC_AD15, (PTU | IEN | M0)}, /* gpmc_ad15 */ + {GPMC_A16, (PTU | IEN | M3)}, /* gpio_40 */ + {GPMC_A17, (PTU | IEN | M3)}, /* gpio_41 - hdmi_ls_oe */ + {GPMC_A18, (PTU | IEN | M3)}, /* gpio_42 */ + {GPMC_A19, (PTU | IEN | M3)}, /* gpio_43 - wifi_en */ + {GPMC_A20, (PTU | IEN | M3)}, /* gpio_44 - eth_irq */ + {GPMC_A21, (PTU | IEN | M3)}, /* gpio_45 - eth_nreset */ + {GPMC_A22, (PTU | IEN | M3)}, /* gpio_46 - eth_pme */ + {GPMC_A23, (PTU | IEN | M3)}, /* gpio_47 */ + {GPMC_A24, (PTU | IEN | M3)}, /* gpio_48 - eth_mdix */ + {GPMC_A25, (PTU | IEN | M3)}, /* gpio_49 - bt_wakeup */ + {GPMC_NCS0, (PTU | M0)}, /* gpmc_ncs0 */ + {GPMC_NCS1, (PTU | M0)}, /* gpmc_ncs1 */ + {GPMC_NCS2, (PTU | M0)}, /* gpmc_ncs2 */ + {GPMC_NCS3, (PTU | IEN | M3)}, /* gpio_53 */ + {C2C_DATA12, (PTU | M0)}, /* gpmc_ncs4 */ + {C2C_DATA13, (PTU | M0)}, /* gpmc_ncs5 - eth_cs */ + {GPMC_NWP, (PTU | IEN | M0)}, /* gpmc_nwp */ + {GPMC_CLK, (PTU | IEN | M0)}, /* gpmc_clk */ + {GPMC_NADV_ALE, (PTU | M0)}, /* gpmc_nadv_ale */ + {GPMC_NBE0_CLE, (PTU | M0)}, /* gpmc_nbe0_cle */ + {GPMC_NBE1, (PTU | M0)}, /* gpmc_nbe1 */ + {GPMC_WAIT0, (PTU | IEN | M0)}, /* gpmc_wait0 */ + {GPMC_WAIT1, (PTU | IEN | M0)}, /* gpio_62 - usbh_nreset */ + {GPMC_NOE, (PTU | M0)}, /* gpmc_noe */ + {GPMC_NWE, (PTU | M0)}, /* gpmc_nwe */ + {HDMI_HPD, (PTD | IEN | M3)}, /* gpio_63 - hdmi_hpd */ + {HDMI_CEC, (PTU | IEN | M0)}, /* hdmi_cec */ + {HDMI_DDC_SCL, (M0)}, /* hdmi_ddc_scl */ + {HDMI_DDC_SDA, (IEN | M0)}, /* hdmi_ddc_sda */ + {CSI21_DX0, (IEN | M0)}, /* csi21_dx0 */ + {CSI21_DY0, (IEN | M0)}, /* csi21_dy0 */ + {CSI21_DX1, (IEN | M0)}, /* csi21_dx1 */ + {CSI21_DY1, (IEN | M0)}, /* csi21_dy1 */ + {CSI21_DX2, (IEN | M0)}, /* csi21_dx2 */ + {CSI21_DY2, (IEN | M0)}, /* csi21_dy2 */ + {CSI21_DX3, (IEN | M0)}, /* csi21_dx3 */ + {CSI21_DY3, (IEN | M0)}, /* csi21_dy3 */ + {CSI21_DX4, (IEN | M0)}, /* csi21_dx4 */ + {CSI21_DY4, (IEN | M0)}, /* csi21_dy4 */ + {CSI22_DX0, (IEN | M0)}, /* csi22_dx0 */ + {CSI22_DY0, (IEN | M0)}, /* csi22_dy0 */ + {CSI22_DX1, (IEN | M0)}, /* csi22_dx1 */ + {CSI22_DY1, (IEN | M0)}, /* csi22_dy1 */ + {USBB1_ULPITLL_CLK, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M4)},/* usbb1_ulpiphy_clk */ + {USBB1_ULPITLL_STP, (OFF_EN | OFF_OUT_PTD | M4)}, /* usbb1_ulpiphy_stp */ + {USBB1_ULPITLL_DIR, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dir */ + {USBB1_ULPITLL_NXT, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_nxt */ + {USBB1_ULPITLL_DAT0, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat0 */ + {USBB1_ULPITLL_DAT1, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat1 */ + {USBB1_ULPITLL_DAT2, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat2 */ + {USBB1_ULPITLL_DAT3, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat3 */ + {USBB1_ULPITLL_DAT4, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat4 */ + {USBB1_ULPITLL_DAT5, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat5 */ + {USBB1_ULPITLL_DAT6, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat6 */ + {USBB1_ULPITLL_DAT7, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat7 */ + {USBB1_HSIC_DATA, (PTU | IEN | M3)}, /* gpio_96 - usbh_cpen */ + {USBB1_HSIC_STROBE, (PTU | IEN | M3)}, /* gpio_97 - usbh_reset */ + {ABE_MCBSP2_CLKX, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_mcbsp2_clkx */ + {ABE_MCBSP2_DR, (IEN | OFF_EN | OFF_OUT_PTD | M0)}, /* abe_mcbsp2_dr */ + {ABE_MCBSP2_DX, (OFF_EN | OFF_OUT_PTD | M0)}, /* abe_mcbsp2_dx */ + {ABE_MCBSP2_FSX, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_mcbsp2_fsx */ + {ABE_PDM_UL_DATA, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_pdm_ul_data */ + {ABE_PDM_DL_DATA, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_pdm_dl_data */ + {ABE_PDM_FRAME, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_pdm_frame */ + {ABE_PDM_LB_CLK, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_pdm_lb_clk */ + {ABE_CLKS, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_clks */ + {ABE_DMIC_CLK1, (M0)}, /* abe_dmic_clk1 */ + {ABE_DMIC_DIN1, (IEN | M0)}, /* abe_dmic_din1 */ + {ABE_DMIC_DIN2, (IEN | M0)}, /* abe_dmic_din2 */ + {ABE_DMIC_DIN3, (IEN | M0)}, /* abe_dmic_din3 */ + {UART2_CTS, (PTU | IEN | M0)}, /* uart2_cts */ + {UART2_RTS, (M0)}, /* uart2_rts */ + {UART2_RX, (PTU | IEN | M0)}, /* uart2_rx */ + {UART2_TX, (M0)}, /* uart2_tx */ + {HDQ_SIO, (M0)}, /* hdq-sio */ + {MCSPI1_CLK, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi1_clk */ + {MCSPI1_SOMI, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi1_somi */ + {MCSPI1_SIMO, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi1_simo */ + {MCSPI1_CS0, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi1_cs0 */ + {MCSPI1_CS1, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi1_cs1 */ + {SDMMC5_CLK, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc5_clk */ + {SDMMC5_CMD, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc5_cmd */ + {SDMMC5_DAT0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc5_dat0 */ + {SDMMC5_DAT1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc5_dat1 */ + {SDMMC5_DAT2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc5_dat2 */ + {SDMMC5_DAT3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc5_dat3 */ + {MCSPI4_CLK, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi4_clk */ + {MCSPI4_SIMO, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi4_simo */ + {MCSPI4_SOMI, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi4_somi */ + {MCSPI4_CS0, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi4_cs0 */ + {UART4_RX, (IEN | PTU | M0)}, /* uart4_rx */ + {UART4_TX, (M0)}, /* uart4_tx */ + {USBB2_ULPITLL_CLK, (PTU | IEN | M3)}, /* gpio_157 - start_adc */ + {USBB2_ULPITLL_STP, (PTU | IEN | M3)}, /* gpio_158 - spi_nirq */ + {USBB2_ULPITLL_DIR, (PTU | IEN | M3)}, /* gpio_159 - bt_nreset */ + {USBB2_ULPITLL_NXT, (PTU | IEN | M3)}, /* gpio_160 - audio_pwron*/ + {USBB2_ULPITLL_DAT0, (PTU | IEN | M3)}, /* gpio_161 - bid_0 */ + {USBB2_ULPITLL_DAT1, (PTU | IEN | M3)}, /* gpio_162 - bid_1 */ + {USBB2_ULPITLL_DAT2, (PTU | IEN | M3)}, /* gpio_163 - bid_2 */ + {USBB2_ULPITLL_DAT3, (PTU | IEN | M3)}, /* gpio_164 - bid_3 */ + {USBB2_ULPITLL_DAT4, (PTU | IEN | M3)}, /* gpio_165 - bid_4 */ + {USBB2_ULPITLL_DAT5, (PTU | IEN | M3)}, /* gpio_166 - ts_irq*/ + {USBB2_ULPITLL_DAT6, (PTU | IEN | M3)}, /* gpio_167 - gps_pps */ + {USBB2_ULPITLL_DAT7, (PTU | IEN | M3)}, /* gpio_168 */ + {USBB2_HSIC_DATA, (PTU | IEN | M3)}, /* gpio_169 */ + {USBB2_HSIC_STROBE, (PTU | IEN | M3)}, /* gpio_170 */ + {UNIPRO_TX1, (PTU | IEN | M3)}, /* gpio_173 */ + {USBA0_OTG_CE, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M0)}, /* usba0_otg_ce */ + {USBA0_OTG_DP, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usba0_otg_dp */ + {USBA0_OTG_DM, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usba0_otg_dm */ + {SYS_NIRQ1, (PTU | IEN | M0)}, /* sys_nirq1 */ + {SYS_NIRQ2, (PTU | IEN | M0)}, /* sys_nirq2 */ + {SYS_BOOT0, (M0)}, /* sys_boot0 */ + {SYS_BOOT1, (M0)}, /* sys_boot1 */ + {SYS_BOOT2, (M0)}, /* sys_boot2 */ + {SYS_BOOT3, (M0)}, /* sys_boot3 */ + {SYS_BOOT4, (M0)}, /* sys_boot4 */ + {SYS_BOOT5, (M0)}, /* sys_boot5 */ + {DPM_EMU0, (IEN | M0)}, /* dpm_emu0 */ + {DPM_EMU1, (IEN | M0)}, /* dpm_emu1 */ + {DPM_EMU16, (PTU | IEN | M3)}, /* gpio_27 */ + {DPM_EMU17, (PTU | IEN | M3)}, /* gpio_28 */ + {DPM_EMU18, (PTU | IEN | M3)}, /* gpio_29 */ + {DPM_EMU19, (PTU | IEN | M3)}, /* gpio_30 */ +}; + +const struct pad_conf_entry wkup_padconf_array_non_essential[] = { + {PAD1_FREF_XTAL_IN, (M0)}, /* fref_xtal_in */ + {PAD0_FREF_SLICER_IN, (M0)}, /* fref_slicer_in */ + {PAD1_FREF_CLK_IOREQ, (M0)}, /* fref_clk_ioreq */ + {PAD0_FREF_CLK0_OUT, (M7)}, /* safe mode */ + {PAD1_FREF_CLK3_REQ, M7}, /* safe mode */ + {PAD0_FREF_CLK3_OUT, (M0)}, /* fref_clk3_out */ + {PAD0_SYS_NRESPWRON, (M0)}, /* sys_nrespwron */ + {PAD1_SYS_NRESWARM, (M0)}, /* sys_nreswarm */ + {PAD0_SYS_PWR_REQ, (PTU | M0)}, /* sys_pwr_req */ + {PAD1_SYS_PWRON_RESET, (M3)}, /* gpio_wk29 */ + {PAD0_SYS_BOOT6, (M0)}, /* sys_boot6 */ + {PAD1_SYS_BOOT7, (M0)}, /* sys_boot7 */ +}; + + +#endif /* _DUOVERO_MUX_DATA_H_ */ diff --git a/boards.cfg b/boards.cfg index 983c657..05f24e1 100644 --- a/boards.cfg +++ b/boards.cfg @@ -357,6 +357,7 @@ Active arm armv7 omap3 ti evm Active arm armv7 omap3 ti evm omap3_evm_quick_nand - - Active arm armv7 omap3 ti sdp3430 omap3_sdp3430 - Nishanth Menon <nm(a)ti.com> Active arm armv7 omap3 timll devkit8000 devkit8000 - Thomas Weber <weber(a)corscience.de> +Active arm armv7 omap4 gumstix duovero duovero - Ash Charles <ash(a)gumstix.com> Active arm armv7 omap4 ti panda omap4_panda - Sricharan R <r.sricharan(a)ti.com> Active arm armv7 omap4 ti sdp4430 omap4_sdp4430 - Sricharan R <r.sricharan(a)ti.com> Active arm armv7 omap5 ti dra7xx dra7xx_evm dra7xx_evm:CONS_INDEX=1 Lokesh Vutla <lokeshvutla(a)ti.com> diff --git a/include/configs/duovero.h b/include/configs/duovero.h new file mode 100644 index 0000000..e68f415 --- /dev/null +++ b/include/configs/duovero.h @@ -0,0 +1,62 @@ +/* + * (C) Copyright: 2013 + * Gumstix, Inc - http://www.gumstix.com + * Maintainer: Ash Charles <ash(a)gumstix.com> + * + * Configuration settings for the Gumstix DuoVero board. + * See omap4_common.h for OMAP4 common part + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_DUOVERO_H +#define __CONFIG_DUOVERO_H + +/* + * High Level Configuration Options + */ +#define CONFIG_DUOVERO +#define MACH_TYPE_OMAP4_DUOVERO 4097 /* Until the next sync */ +#define CONFIG_MACH_TYPE MACH_TYPE_OMAP4_DUOVERO + +#include <configs/ti_omap4_common.h> + +#undef CONFIG_SPL_OS_BOOT + +#undef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS +#define CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION +#define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS + +#undef CONFIG_SYS_PROMPT +#define CONFIG_SYS_PROMPT "duovero # " + +/* USB UHH support options */ +#define CONFIG_CMD_USB +#define CONFIG_USB_HOST +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_OMAP +#define CONFIG_USB_STORAGE +#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 + +#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 1 +#define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 62 + +#define CONFIG_SYS_ENABLE_PADS_ALL + +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_NET + +#define CONFIG_SMC911X +#define CONFIG_SMC911X_32_BIT +#define CONFIG_SMC911X_BASE 0x2C000000 + +/* GPIO */ +#define CONFIG_CMD_GPIO + +/* ENV related config options */ +#define CONFIG_ENV_IS_NOWHERE + +#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG + +#endif /* __CONFIG_DUOVERO_H */ diff --git a/include/configs/ti_omap4_common.h b/include/configs/ti_omap4_common.h index bcb5eab..4563cbb 100644 --- a/include/configs/ti_omap4_common.h +++ b/include/configs/ti_omap4_common.h @@ -111,9 +111,13 @@ "importbootenv=echo Importing environment from mmc${mmcdev} ...; " \ "env import -t ${loadaddr} ${filesize}\0" \ "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \ + "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ "mmcboot=echo Booting from mmc${mmcdev} ...; " \ "run mmcargs; " \ "bootz ${loadaddr} - ${fdtaddr}\0" \ + "uimageboot=echo Booting from mmc${mmcdev} ...; " \ + "run mmcargs; " \ + "bootm ${loadaddr}\0" \ "findfdt="\ "if test $board_name = sdp4430; then " \ "setenv fdtfile omap4-sdp.dtb; fi; " \ @@ -123,6 +127,8 @@ "setenv fdtfile omap4-panda-a4.dtb; fi;" \ "if test $board_name = panda-es; then " \ "setenv fdtfile omap4-panda-es.dtb; fi;" \ + "if test $board_name = duovero; then " \ + "setenv fdtfile omap4-duovero.dtb; fi;" \ "if test $fdtfile = undefined; then " \ "echo WARNING: Could not determine device tree to use; fi; \0" \ "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \ @@ -146,6 +152,9 @@ "run loadfdt;" \ "run mmcboot; " \ "fi; " \ + "if run loaduimage; then " \ + "run uimageboot;" \ + "fi; " \ "fi" /* -- 1.8.3.2

2 4

[U-Boot] Please pull mpc85xx
by York Sun 13 May '14

13 May '14

Tom, The following changes since commit 69c0d323e325f48f3124fb0696de3d68fcbcae8e: kbuild: Fix trailing whitespaces (2014-05-12 16:31:51 -0400) are available in the git repository at: git://git.denx.de/u-boot-mpc85xx.git master for you to fetch changes up to 8ad5d45e0044f5e64dbe7c6bd4e6aa0121a26b23: boards.cfg: fix a configuration error of ep8248 board (2014-05-13 11:00:01 -0500) ---------------------------------------------------------------- Alexander Graf (4): PPC 85xx QEMU: Always assume 1 core PPC 85xx QEMU: Don't use HID1 powerpc/mpc85xx: Update TLB CAMs in relocated mode PPC 85xx QEMU: Make a generic board file Aneesh Bansal (2): powerpc/mpc85xx: SECURE BOOT- secure boot target for t1040rdb powerpc/mpc85xx: SECURE BOOT- Add secure boot target for T2080RDB Chunhe Lan (1): powerpc/85xx: Add T4240RDB board support Masahiro Yamada (1): boards.cfg: fix a configuration error of ep8248 board Shaohui Xie (1): powerpc/fman/memac: use default MDIO_HOLD value Shaveta Leekha (2): board/freescale/common: ZM7300 driver board/b4qds: VID support Shengzhou Liu (2): powerpc/t208x: enable errata A006261, A006593, A006379 powerpc/85xx: add T4080 SoC support Stefan Bigler (2): kmp204x: Add support for the unit LEDs kmp204x: handle dip-switch for factory settings Valentin Longchamp (6): kmp204x: selftest/factory test pin support kmp204x: update the CONFIG_PRAM and CONFIG_KM_RESERVED_PRAM defines kmp204x: complete the reset sequence and PRST configuration kmp204x: update the RCW kmp204x: add workaround for A-004849 kmp204x: enable the errata command York Sun (6): powerpc/mpc8572ds: Increase u-boot size to 768KB powerpc/mpc85xx: Ignore FDT pointer for non-QEMU in cpu_init_early_f() powerpc/freescale: Change the return value of mac_read_from_eeprom() powerpc/mpc85xx: Fix boot_flag for calling board_init_f() powerpc/mpc86xx: Fix boot_flag for calling board_init_f() powerpc/freescale: Convert selected boards to generic board architecture Zhao Qiang (1): qe: disable qe when qe-ucode fails to be uploaded for "deep sleep" arch/powerpc/cpu/mpc85xx/Makefile | 2 + arch/powerpc/cpu/mpc85xx/cpu.c | 24 + arch/powerpc/cpu/mpc85xx/cpu_init.c | 17 +- arch/powerpc/cpu/mpc85xx/cpu_init_early.c | 2 + arch/powerpc/cpu/mpc85xx/speed.c | 3 +- arch/powerpc/cpu/mpc85xx/spl_minimal.c | 4 +- arch/powerpc/cpu/mpc85xx/start.S | 4 +- arch/powerpc/cpu/mpc85xx/t4240_ids.c | 2 + arch/powerpc/cpu/mpc85xx/t4240_serdes.c | 2 +- arch/powerpc/cpu/mpc86xx/start.S | 1 + arch/powerpc/cpu/mpc8xxx/cpu.c | 5 +- arch/powerpc/include/asm/config_mpc85xx.h | 19 +- arch/powerpc/include/asm/fsl_errata.h | 5 + arch/powerpc/include/asm/fsl_secure_boot.h | 3 +- arch/powerpc/include/asm/immap_85xx.h | 6 +- arch/powerpc/include/asm/processor.h | 1 + board/freescale/b4860qds/b4860qds.c | 240 +++++++++ board/freescale/common/Makefile | 1 + board/freescale/common/sys_eeprom.c | 6 +- board/freescale/common/zm7300.c | 235 +++++++++ board/freescale/common/zm7300.h | 22 + board/freescale/qemu-ppce500/qemu-ppce500.c | 20 + board/freescale/t4rdb/Makefile | 12 + board/freescale/t4rdb/ddr.c | 118 +++++ board/freescale/t4rdb/ddr.h | 78 +++ board/freescale/t4rdb/eth.c | 146 ++++++ board/freescale/t4rdb/law.c | 28 + board/freescale/t4rdb/pci.c | 23 + board/freescale/t4rdb/t4240rdb.c | 125 +++++ board/freescale/t4rdb/t4_pbi.cfg | 31 ++ board/freescale/t4rdb/t4_rcw.cfg | 7 + board/freescale/t4rdb/t4rdb.h | 18 + board/freescale/t4rdb/tlb.c | 111 ++++ board/keymile/kmp204x/kmp204x.c | 75 ++- board/keymile/kmp204x/kmp204x.h | 3 + board/keymile/kmp204x/pbi.cfg | 43 +- board/keymile/kmp204x/pci.c | 17 +- board/keymile/kmp204x/qrio.c | 31 +- board/keymile/kmp204x/rcw_kmp204x.cfg | 2 +- boards.cfg | 7 +- drivers/mmc/fsl_esdhc.c | 2 +- drivers/net/fm/Makefile | 1 + drivers/net/fm/memac_phy.c | 8 +- drivers/qe/qe.c | 9 +- include/common.h | 5 +- include/configs/B4860QDS.h | 14 + include/configs/MPC8536DS.h | 2 + include/configs/MPC8572DS.h | 5 +- include/configs/MPC8641HPCN.h | 3 + include/configs/T208xRDB.h | 1 + include/configs/T4240RDB.h | 752 +++++++++++++++++++++++++++ include/configs/corenet_ds.h | 3 + include/configs/km/kmp204x-common.h | 17 +- include/configs/p1_p2_rdb_pc.h | 3 + include/configs/qemu-ppce500.h | 1 + include/configs/t4qds.h | 2 + 56 files changed, 2257 insertions(+), 70 deletions(-) create mode 100644 board/freescale/common/zm7300.c create mode 100644 board/freescale/common/zm7300.h create mode 100644 board/freescale/t4rdb/Makefile create mode 100644 board/freescale/t4rdb/ddr.c create mode 100644 board/freescale/t4rdb/ddr.h create mode 100644 board/freescale/t4rdb/eth.c create mode 100644 board/freescale/t4rdb/law.c create mode 100644 board/freescale/t4rdb/pci.c create mode 100644 board/freescale/t4rdb/t4240rdb.c create mode 100644 board/freescale/t4rdb/t4_pbi.cfg create mode 100644 board/freescale/t4rdb/t4_rcw.cfg create mode 100644 board/freescale/t4rdb/t4rdb.h create mode 100644 board/freescale/t4rdb/tlb.c create mode 100644 include/configs/T4240RDB.h Thanks, York

2 2

[U-Boot] Support for Tegra Jetson TK1
by Hamza Farooq 13 May '14

13 May '14

Hello, does the current u-boot for Tegra branch fully support Jetson TK1 board? The recent commits somehow look incomplete (I was not able to find RAM/Flash configuration). If it is the case, I'll be thankful if I could be pointed in the right direction. It is obvious that I am not very experienced with uboot but I am planning to learn/develop it for my Master thesis. PS: This is my first post ever in a mailing list. In case I am doing something wrong, please point me to the right direction. Thank you all for your patience Regards, Hamza Farooq

2 1