November 2014 - U-Boot

[U-Boot] [PATCH 2/4] qe: add u-qe support to arm board
by Zhao Qiang 25 Nov '14

25 Nov '14

ls1021 is arm-core and support qe which is u-qe. add u-qe init for arm board. Signed-off-by: Zhao Qiang <B45475(a)freescale.com> --- arch/arm/include/asm/arch-ls102xa/config.h | 4 ++++ arch/arm/include/asm/global_data.h | 8 ++++++++ drivers/Makefile | 1 + drivers/qe/Makefile | 3 ++- drivers/qe/fdt.c | 2 ++ drivers/qe/qe.c | 13 +++++++++++++ drivers/qe/qe.h | 1 + 7 files changed, 31 insertions(+), 1 deletion(-) diff --git a/arch/arm/include/asm/arch-ls102xa/config.h b/arch/arm/include/asm/arch-ls102xa/config.h index ed78c33..526ceb4 100644 --- a/arch/arm/include/asm/arch-ls102xa/config.h +++ b/arch/arm/include/asm/arch-ls102xa/config.h @@ -65,6 +65,10 @@ #define DCU_LAYER_MAX_NUM 16 +#define QE_MURAM_SIZE 0x6000UL +#define MAX_QE_RISC 1 +#define QE_NUM_OF_SNUM 28 + #define CONFIG_SYS_FSL_SRDS_1 #ifdef CONFIG_LS102XA diff --git a/arch/arm/include/asm/global_data.h b/arch/arm/include/asm/global_data.h index 63e4ad5..900f127 100644 --- a/arch/arm/include/asm/global_data.h +++ b/arch/arm/include/asm/global_data.h @@ -17,6 +17,14 @@ struct arch_global_data { #if defined(CONFIG_FSL_ESDHC) u32 sdhc_clk; #endif + +#if defined(CONFIG_U_QE) + u32 qe_clk; + u32 brg_clk; + uint mp_alloc_base; + uint mp_alloc_top; +#endif /* CONFIG_U_QE */ + #ifdef CONFIG_AT91FAMILY /* "static data" needed by at91's clock.c */ unsigned long cpu_clk_rate_hz; diff --git a/drivers/Makefile b/drivers/Makefile index b23076f..f4ae477 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -14,4 +14,5 @@ obj-y += twserial/ obj-y += video/ obj-y += watchdog/ obj-$(CONFIG_QE) += qe/ +obj-$(CONFIG_U_QE) += qe/ obj-y += memory/ diff --git a/drivers/qe/Makefile b/drivers/qe/Makefile index 7f1bd06..8fa4866 100644 --- a/drivers/qe/Makefile +++ b/drivers/qe/Makefile @@ -4,5 +4,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-y := qe.o uccf.o uec.o uec_phy.o +obj-$(CONFIG_QE) += qe.o uccf.o uec.o uec_phy.o +obj-$(CONFIG_U_QE) += qe.o obj-$(CONFIG_OF_LIBFDT) += fdt.o diff --git a/drivers/qe/fdt.c b/drivers/qe/fdt.c index d9a7d82..dfae4bf 100644 --- a/drivers/qe/fdt.c +++ b/drivers/qe/fdt.c @@ -12,6 +12,7 @@ #include <fdt_support.h> #include "qe.h" +#ifdef CONFIG_QE DECLARE_GLOBAL_DATA_PTR; /* @@ -72,3 +73,4 @@ void ft_qe_setup(void *blob) "clock-frequency", gd->arch.qe_clk / 2, 1); fdt_fixup_qe_firmware(blob); } +#endif diff --git a/drivers/qe/qe.c b/drivers/qe/qe.c index be09a17..075fd48 100644 --- a/drivers/qe/qe.c +++ b/drivers/qe/qe.c @@ -40,6 +40,7 @@ void qe_issue_cmd(uint cmd, uint sbc, u8 mcn, u32 cmd_data) return; } +#ifdef CONFIG_QE uint qe_muram_alloc(uint size, uint align) { uint retloc; @@ -70,6 +71,7 @@ uint qe_muram_alloc(uint size, uint align) return retloc; } +#endif void *qe_muram_addr(uint offset) { @@ -180,6 +182,15 @@ void qe_init(uint qe_base) qe_snums_init(); } +void u_qe_init(void) +{ + uint qe_base = CONFIG_SYS_IMMR + 0x01400000; /* QE immr base */ + qe_immr = (qe_map_t *)qe_base; + + qe_upload_firmware((const void *)CONFIG_SYS_QE_FW_ADDR); + out_be32(&qe_immr->iram.iready, QE_IRAM_READY); +} + void qe_reset(void) { qe_issue_cmd(QE_RESET, QE_CR_SUBBLOCK_INVALID, @@ -212,6 +223,7 @@ void qe_assign_page(uint snum, uint para_ram_base) #define BRG_CLK (gd->arch.brg_clk) +#ifdef CONFIG_QE int qe_set_brg(uint brg, uint rate) { volatile uint *bp; @@ -239,6 +251,7 @@ int qe_set_brg(uint brg, uint rate) return 0; } +#endif /* Set ethernet MII clock master */ diff --git a/drivers/qe/qe.h b/drivers/qe/qe.h index ebb7c5f..30484b8 100644 --- a/drivers/qe/qe.h +++ b/drivers/qe/qe.h @@ -275,6 +275,7 @@ void *qe_muram_addr(uint offset); int qe_get_snum(void); void qe_put_snum(u8 snum); void qe_init(uint qe_base); +void u_qe_init(void); void qe_reset(void); void qe_assign_page(uint snum, uint para_ram_base); int qe_set_brg(uint brg, uint rate); -- 2.1.0.27.g96db324

3 3

[U-Boot] [Patch] mmc: fsl_esdhc: fix f_max retrieval during init
by Markus Niebel 25 Nov '14

25 Nov '14

From: Markus Niebel <Markus.Niebel(a)tq-group.com> for multi instance API we use struct fsl_esdhc_cfg to pass the clock rate. Do not set f_max from global data, since this is wrong for multi instance case. Signed-off-by: Markus Niebel <Markus.Niebel(a)tq-group.com> --- drivers/mmc/fsl_esdhc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c index 2640607..8a1a461 100644 --- a/drivers/mmc/fsl_esdhc.c +++ b/drivers/mmc/fsl_esdhc.c @@ -610,7 +610,7 @@ int fsl_esdhc_initialize(bd_t *bis, struct fsl_esdhc_cfg *cfg) #endif cfg->cfg.f_min = 400000; - cfg->cfg.f_max = min(gd->arch.sdhc_clk, 52000000); + cfg->cfg.f_max = min(cfg->sdhc_clk, 52000000); cfg->cfg.b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT; -- 2.1.1

4 3

[U-Boot] [PATCH 1/4] net/fm: add 2.5G SGMII support
by Shengzhou Liu 25 Nov '14

25 Nov '14

As auto-negotiation is not supported for 2.5G SGMII, we need to add a new type PHY_INTERFACE_MODE_SGMII_2500 to differentiate SGMII-1G and SGMII-2.5G with different setting for auto-negotiation. Signed-off-by: Shaohui Xie <Shaohui.Xie(a)freescale.com> Signed-off-by: Shengzhou Liu <Shengzhou.Liu(a)freescale.com> --- arch/powerpc/include/asm/fsl_serdes.h | 16 ++++++++++++++++ drivers/net/fm/eth.c | 16 ++++++++++++---- include/phy.h | 2 ++ 3 files changed, 30 insertions(+), 4 deletions(-) diff --git a/arch/powerpc/include/asm/fsl_serdes.h b/arch/powerpc/include/asm/fsl_serdes.h index f60cb0a..8e0e190 100644 --- a/arch/powerpc/include/asm/fsl_serdes.h +++ b/arch/powerpc/include/asm/fsl_serdes.h @@ -71,6 +71,22 @@ enum srds_prtcl { INTERLAKEN, QSGMII_SW1_A, /* Indicates ports on L2 Switch */ QSGMII_SW1_B, + SGMII_2500_FM1_DTSEC1, + SGMII_2500_FM1_DTSEC2, + SGMII_2500_FM1_DTSEC3, + SGMII_2500_FM1_DTSEC4, + SGMII_2500_FM1_DTSEC5, + SGMII_2500_FM1_DTSEC6, + SGMII_2500_FM1_DTSEC9, + SGMII_2500_FM1_DTSEC10, + SGMII_2500_FM2_DTSEC1, + SGMII_2500_FM2_DTSEC2, + SGMII_2500_FM2_DTSEC3, + SGMII_2500_FM2_DTSEC4, + SGMII_2500_FM2_DTSEC5, + SGMII_2500_FM2_DTSEC6, + SGMII_2500_FM2_DTSEC9, + SGMII_2500_FM2_DTSEC10, }; enum srds { diff --git a/drivers/net/fm/eth.c b/drivers/net/fm/eth.c index 218a5ed..137886c 100644 --- a/drivers/net/fm/eth.c +++ b/drivers/net/fm/eth.c @@ -39,9 +39,14 @@ static void dtsec_configure_serdes(struct fm_eth *priv) u32 value; struct mii_dev bus; bus.priv = priv->mac->phyregs; + bool sgmii_2500 = (priv->enet_if == + PHY_INTERFACE_MODE_SGMII_2500) ? true : false; + + /* SGMII IF mode + AN enable only for 1G SGMII, not for 2.5G */ + value = PHY_SGMII_IF_MODE_SGMII; + if (!sgmii_2500) + value |= PHY_SGMII_IF_MODE_AN; - /* SGMII IF mode + AN enable */ - value = PHY_SGMII_IF_MODE_AN | PHY_SGMII_IF_MODE_SGMII; memac_mdio_write(&bus, 0, MDIO_DEVAD_NONE, 0x14, value); /* Dev ability according to SGMII specification */ @@ -54,7 +59,9 @@ static void dtsec_configure_serdes(struct fm_eth *priv) memac_mdio_write(&bus, 0, MDIO_DEVAD_NONE, 0x12, 0xd40); /* Restart AN */ - value = PHY_SGMII_CR_DEF_VAL | PHY_SGMII_CR_RESET_AN; + value = PHY_SGMII_CR_DEF_VAL; + if (!sgmii_2500) + value |= PHY_SGMII_CR_RESET_AN; memac_mdio_write(&bus, 0, MDIO_DEVAD_NONE, 0, value); #else struct dtsec *regs = priv->mac->base; @@ -83,7 +90,8 @@ static void dtsec_init_phy(struct eth_device *dev) out_be32(&regs->tbipa, CONFIG_SYS_TBIPA_VALUE); #endif - if (fm_eth->enet_if == PHY_INTERFACE_MODE_SGMII) + if (fm_eth->enet_if == PHY_INTERFACE_MODE_SGMII || + fm_eth->enet_if == PHY_INTERFACE_MODE_SGMII_2500) dtsec_configure_serdes(fm_eth); } diff --git a/include/phy.h b/include/phy.h index d3ecd63..3c5f111 100644 --- a/include/phy.h +++ b/include/phy.h @@ -39,6 +39,7 @@ typedef enum { PHY_INTERFACE_MODE_MII, PHY_INTERFACE_MODE_GMII, PHY_INTERFACE_MODE_SGMII, + PHY_INTERFACE_MODE_SGMII_2500, PHY_INTERFACE_MODE_QSGMII, PHY_INTERFACE_MODE_TBI, PHY_INTERFACE_MODE_RMII, @@ -55,6 +56,7 @@ static const char *phy_interface_strings[] = { [PHY_INTERFACE_MODE_MII] = "mii", [PHY_INTERFACE_MODE_GMII] = "gmii", [PHY_INTERFACE_MODE_SGMII] = "sgmii", + [PHY_INTERFACE_MODE_SGMII_2500] = "sgmii-2500", [PHY_INTERFACE_MODE_QSGMII] = "qsgmii", [PHY_INTERFACE_MODE_TBI] = "tbi", [PHY_INTERFACE_MODE_RMII] = "rmii", -- 1.8.0

3 2

[U-Boot] [PATCH 2/2][v2] powerpc/t2080qds: fix for 1000BASE-KX
by shh.xie＠gmail.com 25 Nov '14

25 Nov '14

From: Shaohui Xie <Shaohui.Xie(a)freescale.com> 1000BASE-KX(1G-KX) uses SGMII protocol but the serdes lane runs in 1G-KX mode. By default, the lane runs in SGMII mode, when a MAC uses a lane in 1G-KX mode, corresponding bit in PCCR1 for the lane needs to be set, and needs to fixup dtb accordingly for kernel to do proper initialization. Hwconfig "fsl_1gkx" is used to indicate a MAC runs in 1G-KX mode, FM1 MAC 1/2/5/6/9/10 are available for 1G-KX, MAC 3/4 run in RGMII mode. To set a MAC runs in 1G-KX mode, set its' corresponding env in "fsl_1gkx", 'fm1_1g1' stands for FM1-MAC1, 'fm1_1g2' stands for FM1-MAC2, etc. If all MAC 1/2/5/6/9/10 run in 1G-KX mode, the hwconfig should has below setting: fsl_1gkx:fm1_1g1,fm1_1g2,fm1_1g5,fm1_1g6,fm1_1g9,fm1_1g10 Signed-off-by: Shaohui Xie <Shaohui.Xie(a)freescale.com> --- changes for V2: - add 1G-KX description in t208xqds README. - refined commit message. board/freescale/t208xqds/README | 12 +++++ board/freescale/t208xqds/eth_t208xqds.c | 86 +++++++++++++++++++++++++++++++++ 2 files changed, 98 insertions(+) diff --git a/board/freescale/t208xqds/README b/board/freescale/t208xqds/README index e3eb5ba..83060c1 100755 --- a/board/freescale/t208xqds/README +++ b/board/freescale/t208xqds/README @@ -104,6 +104,18 @@ XFI: set "fsl_10gkr_copper:fm1_10g1,fm1_10g2" in hwconfig, then first two XFI ports will use copper cable, the other two XFI ports will use fiber cable. +1000BASE-KX(1G-KX): + - T2080QDS can support 1G-KX by using SGMII protocol, but serdes lane + runs in 1G-KX mode. By default, the lane runs in SGMII mode, to set a lane + in 1G-KX mode, need to set corresponding bit in SerDes Protocol Configuration + Register 1 (PCCR1), and U-boot fixup the dtb for kernel to do proper + initialization. + Hwconfig "fsl_1gkx" is used to indicate a lane runs in 1G-KX mode, MAC + 1/2/5/6/9/10 are available for 1G-KX, MAC 3/4 run in RGMII mode. To set a + MAC to use 1G-KX mode, set its' corresponding env in "fsl_1gkx", 'fm1_1g1' + stands for MAC 1, 'fm1_1g2' stands for MAC 2, etc. + For ex. set "fsl_1gkx:fm1_1g1,fm1_1g2,fm1_1g5,fm1_1g6,fm1_1g9,fm1_1g10" in + hwconfig, MAC 1/2/5/6/9/10 will use 1G-KX mode. System Memory map ---------------- diff --git a/board/freescale/t208xqds/eth_t208xqds.c b/board/freescale/t208xqds/eth_t208xqds.c index 8675dbb..b3a4317 100644 --- a/board/freescale/t208xqds/eth_t208xqds.c +++ b/board/freescale/t208xqds/eth_t208xqds.c @@ -47,6 +47,15 @@ #define EMI2 8 #endif +#define PCCR1_SGMIIA_KX_MASK 0x00008000 +#define PCCR1_SGMIIB_KX_MASK 0x00004000 +#define PCCR1_SGMIIC_KX_MASK 0x00002000 +#define PCCR1_SGMIID_KX_MASK 0x00001000 +#define PCCR1_SGMIIE_KX_MASK 0x00000800 +#define PCCR1_SGMIIF_KX_MASK 0x00000400 +#define PCCR1_SGMIIG_KX_MASK 0x00000200 +#define PCCR1_SGMIIH_KX_MASK 0x00000100 + static int mdio_mux[NUM_FM_PORTS]; static const char * const mdio_names[] = { @@ -195,6 +204,10 @@ void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr, int off; ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + serdes_corenet_t *srds_regs = + (void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR; + u32 srds1_pccr1 = in_be32(&srds_regs->srdspccr1); + u32 srds_s1 = in_be32(&gur->rcwsr[4]) & FSL_CORENET2_RCWSR4_SRDS1_PRTCL; @@ -205,9 +218,54 @@ void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr, switch (port) { #if defined(CONFIG_T2080QDS) case FM1_DTSEC1: + if (hwconfig_sub("fsl_1gkx", "fm1_1g1")) { + media_type = 1; + fdt_set_phy_handle(fdt, compat, addr, + "phy_1gkx1"); + fdt_status_okay_by_alias(fdt, "1gkx_pcs_mdio1"); + sprintf(buf, "%s%s%s", buf, "lane-c,", + (char *)lane_mode[0]); + out_be32(&srds_regs->srdspccr1, srds1_pccr1 | + PCCR1_SGMIIH_KX_MASK); + break; + } case FM1_DTSEC2: + if (hwconfig_sub("fsl_1gkx", "fm1_1g2")) { + media_type = 1; + fdt_set_phy_handle(fdt, compat, addr, + "phy_1gkx2"); + fdt_status_okay_by_alias(fdt, "1gkx_pcs_mdio2"); + sprintf(buf, "%s%s%s", buf, "lane-d,", + (char *)lane_mode[0]); + out_be32(&srds_regs->srdspccr1, srds1_pccr1 | + PCCR1_SGMIIG_KX_MASK); + break; + } case FM1_DTSEC9: + if (hwconfig_sub("fsl_1gkx", "fm1_1g9")) { + media_type = 1; + fdt_set_phy_handle(fdt, compat, addr, + "phy_1gkx9"); + fdt_status_okay_by_alias(fdt, "1gkx_pcs_mdio9"); + sprintf(buf, "%s%s%s", buf, "lane-a,", + (char *)lane_mode[0]); + out_be32(&srds_regs->srdspccr1, srds1_pccr1 | + PCCR1_SGMIIE_KX_MASK); + break; + } case FM1_DTSEC10: + if (hwconfig_sub("fsl_1gkx", "fm1_1g10")) { + media_type = 1; + fdt_set_phy_handle(fdt, compat, addr, + "phy_1gkx10"); + fdt_status_okay_by_alias(fdt, + "1gkx_pcs_mdio10"); + sprintf(buf, "%s%s%s", buf, "lane-b,", + (char *)lane_mode[0]); + out_be32(&srds_regs->srdspccr1, srds1_pccr1 | + PCCR1_SGMIIF_KX_MASK); + break; + } if (mdio_mux[port] == EMI1_SLOT2) { sprintf(alias, "phy_sgmii_s2_%x", phy); fdt_set_phy_handle(fdt, compat, addr, alias); @@ -219,7 +277,29 @@ void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr, } break; case FM1_DTSEC5: + if (hwconfig_sub("fsl_1gkx", "fm1_1g5")) { + media_type = 1; + fdt_set_phy_handle(fdt, compat, addr, + "phy_1gkx5"); + fdt_status_okay_by_alias(fdt, "1gkx_pcs_mdio5"); + sprintf(buf, "%s%s%s", buf, "lane-g,", + (char *)lane_mode[0]); + out_be32(&srds_regs->srdspccr1, srds1_pccr1 | + PCCR1_SGMIIC_KX_MASK); + break; + } case FM1_DTSEC6: + if (hwconfig_sub("fsl_1gkx", "fm1_1g6")) { + media_type = 1; + fdt_set_phy_handle(fdt, compat, addr, + "phy_1gkx6"); + fdt_status_okay_by_alias(fdt, "1gkx_pcs_mdio6"); + sprintf(buf, "%s%s%s", buf, "lane-h,", + (char *)lane_mode[0]); + out_be32(&srds_regs->srdspccr1, srds1_pccr1 | + PCCR1_SGMIID_KX_MASK); + break; + } if (mdio_mux[port] == EMI1_SLOT1) { sprintf(alias, "phy_sgmii_s1_%x", phy); fdt_set_phy_handle(fdt, compat, addr, alias); @@ -263,6 +343,12 @@ void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr, default: break; } + if (media_type) { + /* set property for 1000BASE-KX in dtb */ + off = fdt_node_offset_by_compat_reg(fdt, + "fsl,fman-memac-mdio", addr + 0x1000); + fdt_setprop_string(fdt, off, "lane-instance", buf); + } } else if (fm_info_get_enet_if(port) == PHY_INTERFACE_MODE_XGMII) { switch (srds_s1) { -- 1.8.0

2 1

[U-Boot] [PATCH 1/2][v2] powerpc/t2080qds: fixup dtb for 10g-kr
by Shaohui Xie 25 Nov '14

25 Nov '14

XFI ports on t2080qds can work with fiber cable and direct attach cable(copper). We use hwconfig to define cable type for XFI, and fixup dtb based on the cable type. For copper cable, set below env in hwconfig: fsl_10gkr_copper:<10g_mac_name> the <10g_mac_name> can be fm1_10g1, fm1_10g2, fm1_10g3, fm1_10g4. fm1_10g1 stands for FM1-MAC9, fm1_10g2 stands for FM1-MAC10, fm1_10g3 stands for FM1-MAC1, fm1_10g4 stands for FM1-MAC2. The four <10g_mac_name>s do not have to be coexist in hwconfig. For XFI ports, if a given 10G port will use the copper cable for 10GBASE-KR, set the <10g_mac_name> of the port in hwconfig, otherwise, fiber cable will be assumed to be used for the port. For ex. if four XFI ports will both use copper cable, the hwconfig should contain: fsl_10gkr_copper:fm1_10g1,fm1_10g2,fm1_10g3,fm1_10g4 Signed-off-by: Shaohui Xie <Shaohui.Xie(a)freescale.com> --- changes for V2: add XFI description in t208xqds README. board/freescale/t208xqds/README | 23 ++++++++- board/freescale/t208xqds/eth_t208xqds.c | 86 +++++++++++++++++++++++++++++---- 2 files changed, 98 insertions(+), 11 deletions(-) diff --git a/board/freescale/t208xqds/README b/board/freescale/t208xqds/README index e05a10f..e3eb5ba 100755 --- a/board/freescale/t208xqds/README +++ b/board/freescale/t208xqds/README @@ -85,10 +85,29 @@ System Logic: - QIXIS-II FPGA system controll Debug Features: - Support Legacy, COP/JTAG, Aurora, Event and EVT - +XFI: + - XFI is supported on T2080QDS through Lane A/B/C/D on Serdes 1 routed to + a on-board SFP+ cages, which to house optical module (fiber cable) or + direct attach cable(copper), the copper cable is used to emulate + 10GBASE-KR scenario. + So, for XFI usage, there are two scenarios, one will use fiber cable, + another will use copper cable. An hwconfig env "fsl_10gkr_copper" is + introduced to indicate a XFI port will use copper cable, and U-boot + will fixup the dtb accordingly. + It's used as: fsl_10gkr_copper:<10g_mac_name> + The <10g_mac_name> can be fm1_10g1, fm1_10g2, fm1_10g3, fm1_10g4, they + do not have to be coexist in hwconfig. If a MAC is listed in the env + "fsl_10gkr_copper", it will use copper cable, otherwise, fiber cable + will be used by default. + for ex. set "fsl_10gkr_copper:fm1_10g1,fm1_10g2,fm1_10g3,fm1_10g4" in + hwconfig, then both four XFI ports will use copper cable. + set "fsl_10gkr_copper:fm1_10g1,fm1_10g2" in hwconfig, then first two + XFI ports will use copper cable, the other two XFI ports will use fiber + cable. System Memory map ------------------ +---------------- + Start Address End Address Description Size 0xF_FFDF_0000 0xF_FFDF_0FFF IFC - CPLD 4KB 0xF_FF80_0000 0xF_FF80_FFFF IFC - NAND Flash 64KB diff --git a/board/freescale/t208xqds/eth_t208xqds.c b/board/freescale/t208xqds/eth_t208xqds.c index 5879198..8675dbb 100644 --- a/board/freescale/t208xqds/eth_t208xqds.c +++ b/board/freescale/t208xqds/eth_t208xqds.c @@ -23,6 +23,7 @@ #include <phy.h> #include <asm/fsl_dtsec.h> #include <asm/fsl_serdes.h> +#include <hwconfig.h> #include "../common/qixis.h" #include "../common/fman.h" #include "t208xqds_qixis.h" @@ -187,7 +188,12 @@ void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr, { int phy; char alias[20]; + char lane_mode[2][20] = {"1000BASE-KX", "10GBASE-KR"}; + char buf[32] = "serdes-1,"; struct fixed_link f_link; + int media_type = 0; + int off; + ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); u32 srds_s1 = in_be32(&gur->rcwsr[4]) & FSL_CORENET2_RCWSR4_SRDS1_PRTCL; @@ -265,15 +271,77 @@ void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr, case 0x6c: case 0x6d: case 0x71: - f_link.phy_id = port; - f_link.duplex = 1; - f_link.link_speed = 10000; - f_link.pause = 0; - f_link.asym_pause = 0; - /* no PHY for XFI */ - fdt_delprop(fdt, offset, "phy-handle"); - fdt_setprop(fdt, offset, "fixed-link", &f_link, - sizeof(f_link)); + /* + * if the 10G is XFI, check hwconfig to see what is the + * media type, there are two types, fiber or copper, + * fix the dtb accordingly. + */ + switch (port) { + case FM1_10GEC1: + if (hwconfig_sub("fsl_10gkr_copper", "fm1_10g1")) { + /* it's MAC9 */ + media_type = 1; + fdt_set_phy_handle(fdt, compat, addr, + "phy_xfi9"); + fdt_status_okay_by_alias(fdt, "xfi_pcs_mdio9"); + sprintf(buf, "%s%s%s", buf, "lane-a,", + (char *)lane_mode[1]); + } + break; + case FM1_10GEC2: + if (hwconfig_sub("fsl_10gkr_copper", "fm1_10g2")) { + /* it's MAC10 */ + media_type = 1; + fdt_set_phy_handle(fdt, compat, addr, + "phy_xfi10"); + fdt_status_okay_by_alias(fdt, "xfi_pcs_mdio10"); + sprintf(buf, "%s%s%s", buf, "lane-b,", + (char *)lane_mode[1]); + } + break; + case FM1_10GEC3: + if (hwconfig_sub("fsl_10gkr_copper", "fm1_10g3")) { + /* it's MAC1 */ + media_type = 1; + fdt_set_phy_handle(fdt, compat, addr, + "phy_xfi1"); + fdt_status_okay_by_alias(fdt, "xfi_pcs_mdio1"); + sprintf(buf, "%s%s%s", buf, "lane-c,", + (char *)lane_mode[1]); + } + break; + case FM1_10GEC4: + if (hwconfig_sub("fsl_10gkr_copper", "fm1_10g4")) { + /* it's MAC2 */ + media_type = 1; + fdt_set_phy_handle(fdt, compat, addr, + "phy_xfi2"); + fdt_status_okay_by_alias(fdt, "xfi_pcs_mdio2"); + sprintf(buf, "%s%s%s", buf, "lane-d,", + (char *)lane_mode[1]); + } + break; + default: + return; + } + + if (!media_type) { + /* fixed-link is used for XFI fiber cable */ + f_link.phy_id = port; + f_link.duplex = 1; + f_link.link_speed = 10000; + f_link.pause = 0; + f_link.asym_pause = 0; + fdt_delprop(fdt, offset, "phy-handle"); + fdt_setprop(fdt, offset, "fixed-link", &f_link, + sizeof(f_link)); + } else { + /* set property for copper cable */ + off = fdt_node_offset_by_compat_reg(fdt, + "fsl,fman-memac-mdio", addr + 0x1000); + fdt_setprop_string(fdt, off, + "lane-instance", buf); + } break; default: break; -- 1.8.0

2 1

[U-Boot] [PATCH] config: MPC837X : Add complete USB EHCI support
by Nikhil Badola 25 Nov '14

25 Nov '14

Add complete USB EHCI support for MPC837XEMDS and MPC837XERDB Signed-off-by: Nikhil Badola <nikhil.badola(a)freescale.com> --- include/configs/MPC837XEMDS.h | 5 +++++ include/configs/MPC837XERDB.h | 5 +++++ 2 files changed, 10 insertions(+) diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h index 695e47b..832c10f 100644 --- a/include/configs/MPC837XEMDS.h +++ b/include/configs/MPC837XEMDS.h @@ -387,6 +387,11 @@ extern int board_pci_host_broken(void); #define CONFIG_PQ_MDS_PIB 1 /* PQ MDS Platform IO Board */ #define CONFIG_HAS_FSL_DR_USB 1 /* fixup device tree for the DR USB */ +#define CONFIG_CMD_USB +#define CONFIG_USB_STORAGE +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_FSL +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_PCI_PNP /* do pci plug-and-play */ diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h index 1d1f4c0..8ed0f7c 100644 --- a/include/configs/MPC837XERDB.h +++ b/include/configs/MPC837XERDB.h @@ -685,6 +685,11 @@ #define CONFIG_ENV_OVERWRITE #define CONFIG_HAS_FSL_DR_USB +#define CONFIG_CMD_USB +#define CONFIG_USB_STORAGE +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_FSL +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_NETDEV "eth1" -- 1.7.11.7

2 1

[U-Boot] [PATCH v2] powerpc/t4rdb: Add support of CPLD
by Chunhe Lan 25 Nov '14

25 Nov '14

This support of CPLD includes - Files and register definitions - Command to switch alternate bank - Command to switch default bank Signed-off-by: Chunhe Lan <Chunhe.Lan(a)freescale.com> --- board/freescale/t4rdb/Makefile | 1 + board/freescale/t4rdb/cpld.c | 136 ++++++++++++++++++++++++++++++++++++++ board/freescale/t4rdb/cpld.h | 49 ++++++++++++++ board/freescale/t4rdb/law.c | 3 + board/freescale/t4rdb/t4240rdb.c | 12 ++++ board/freescale/t4rdb/tlb.c | 5 ++ include/configs/T4240RDB.h | 23 +++++++ 7 files changed, 229 insertions(+), 0 deletions(-) create mode 100644 board/freescale/t4rdb/cpld.c create mode 100644 board/freescale/t4rdb/cpld.h diff --git a/board/freescale/t4rdb/Makefile b/board/freescale/t4rdb/Makefile index f7f7fc0..3886e3d 100644 --- a/board/freescale/t4rdb/Makefile +++ b/board/freescale/t4rdb/Makefile @@ -5,6 +5,7 @@ # obj-$(CONFIG_T4240RDB) += t4240rdb.o +obj-y += cpld.o obj-y += ddr.o obj-y += eth.o obj-$(CONFIG_PCI) += pci.o diff --git a/board/freescale/t4rdb/cpld.c b/board/freescale/t4rdb/cpld.c new file mode 100644 index 0000000..d5f3812 --- /dev/null +++ b/board/freescale/t4rdb/cpld.c @@ -0,0 +1,136 @@ +/** + * Copyright 2014 Freescale Semiconductor + * + * Author: Chunhe Lan <Chunhe.Lan(a)freescale.com> + * + * SPDX-License-Identifier: GPL-2.0+ + * + * This file provides support for the board-specific CPLD used on some Freescale + * reference boards. + * + * The following macros need to be defined: + * + * CONFIG_SYS_CPLD_BASE - The virtual address of the base of the + * CPLD register map + * + */ + +#include <common.h> +#include <command.h> +#include <asm/io.h> + +#include "cpld.h" + +u8 cpld_read(unsigned int reg) +{ + void *p = (void *)CONFIG_SYS_CPLD_BASE; + + return in_8(p + reg); +} + +void cpld_write(unsigned int reg, u8 value) +{ + void *p = (void *)CONFIG_SYS_CPLD_BASE; + + out_8(p + reg, value); +} + +/** + * Set the boot bank to the alternate bank + */ +void cpld_set_altbank(void) +{ + u8 val, curbank, altbank, override; + + val = CPLD_READ(vbank); + curbank = val & CPLD_BANK_SEL_MASK; + + switch (curbank) { + case CPLD_SELECT_BANK0: + altbank = CPLD_SELECT_BANK4; + CPLD_WRITE(vbank, altbank); + override = CPLD_READ(software_on); + CPLD_WRITE(software_on, override | CPLD_BANK_SEL_EN); + CPLD_WRITE(sys_reset, CPLD_SYSTEM_RESET); + break; + case CPLD_SELECT_BANK4: + altbank = CPLD_SELECT_BANK0; + CPLD_WRITE(vbank, altbank); + override = CPLD_READ(software_on); + CPLD_WRITE(software_on, override | CPLD_BANK_SEL_EN); + CPLD_WRITE(sys_reset, CPLD_SYSTEM_RESET); + break; + default: + printf("CPLD Altbank Fail: Invalid value!\n"); + return; + } +} + +/** + * Set the boot bank to the default bank + */ +void cpld_set_defbank(void) +{ + u8 val; + + val = CPLD_DEFAULT_BANK; + + CPLD_WRITE(global_reset, val); +} + +#ifdef DEBUG +static void cpld_dump_regs(void) +{ + printf("chip_id1 = 0x%02x\n", CPLD_READ(chip_id1)); + printf("chip_id2 = 0x%02x\n", CPLD_READ(chip_id2)); + printf("sw_maj_ver = 0x%02x\n", CPLD_READ(sw_maj_ver)); + printf("sw_min_ver = 0x%02x\n", CPLD_READ(sw_min_ver)); + printf("hw_ver = 0x%02x\n", CPLD_READ(hw_ver)); + printf("software_on = 0x%02x\n", CPLD_READ(software_on)); + printf("cfg_rcw_src = 0x%02x\n", CPLD_READ(cfg_rcw_src)); + printf("res0 = 0x%02x\n", CPLD_READ(res0)); + printf("vbank = 0x%02x\n", CPLD_READ(vbank)); + printf("sw1_sysclk = 0x%02x\n", CPLD_READ(sw1_sysclk)); + printf("sw2_status = 0x%02x\n", CPLD_READ(sw2_status)); + printf("sw3_status = 0x%02x\n", CPLD_READ(sw3_status)); + printf("sw4_status = 0x%02x\n", CPLD_READ(sw4_status)); + printf("sys_reset = 0x%02x\n", CPLD_READ(sys_reset)); + printf("global_reset = 0x%02x\n", CPLD_READ(global_reset)); + printf("res1 = 0x%02x\n", CPLD_READ(res1)); + putc('\n'); +} +#endif + +#ifndef CONFIG_SPL_BUILD +int do_cpld(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + int rc = 0; + + if (argc <= 1) + return cmd_usage(cmdtp); + + if (strcmp(argv[1], "reset") == 0) { + if (strcmp(argv[2], "altbank") == 0) + cpld_set_altbank(); + else + cpld_set_defbank(); +#ifdef DEBUG + } else if (strcmp(argv[1], "dump") == 0) { + cpld_dump_regs(); +#endif + } else + rc = cmd_usage(cmdtp); + + return rc; +} + +U_BOOT_CMD( + cpld, CONFIG_SYS_MAXARGS, 1, do_cpld, + "Reset the board or alternate bank", + "reset - reset to default bank\n" + "cpld reset altbank - reset to alternate bank\n" +#ifdef DEBUG + "cpld dump - display the CPLD registers\n" +#endif + ); +#endif diff --git a/board/freescale/t4rdb/cpld.h b/board/freescale/t4rdb/cpld.h new file mode 100644 index 0000000..0180082 --- /dev/null +++ b/board/freescale/t4rdb/cpld.h @@ -0,0 +1,49 @@ +/** + * Copyright 2014 Freescale Semiconductor + * + * Author: Chunhe Lan <Chunhe.Lan(a)freescale.com> + * + * SPDX-License-Identifier: GPL-2.0+ + * + * This file provides support for the ngPIXIS, a board-specific FPGA used on + * some Freescale reference boards. + */ + +/* + * CPLD register set. Feel free to add board-specific #ifdefs where necessary. + */ +struct cpld_data { + u8 chip_id1; /* 0x00 - CPLD Chip ID1 Register */ + u8 chip_id2; /* 0x01 - CPLD Chip ID2 Register */ + u8 sw_maj_ver; /* 0x02 - CPLD Code Major Version Register */ + u8 sw_min_ver; /* 0x03 - CPLD Code Minor Version Register */ + u8 hw_ver; /* 0x04 - PCBA Version Register */ + u8 software_on; /* 0x05 - Override Physical Switch Enable Register */ + u8 cfg_rcw_src; /* 0x06 - RCW Source Location Control Register */ + u8 res0; /* 0x07 - not used */ + u8 vbank; /* 0x08 - Flash Bank Selection Control Register */ + u8 sw1_sysclk; /* 0x09 - SW1 Status Read Back Register */ + u8 sw2_status; /* 0x0a - SW2 Status Read Back Register */ + u8 sw3_status; /* 0x0b - SW3 Status Read Back Register */ + u8 sw4_status; /* 0x0c - SW4 Status Read Back Register */ + u8 sys_reset; /* 0x0d - Reset System With Reserving Registers Value*/ + u8 global_reset;/* 0x0e - Reset System With Default Registers Value */ + u8 res1; /* 0x0f - not used */ +}; + +#define CPLD_BANK_SEL_MASK 0x07 +#define CPLD_BANK_SEL_EN 0x04 +#define CPLD_SYSTEM_RESET 0x01 +#define CPLD_SELECT_BANK0 0x00 +#define CPLD_SELECT_BANK4 0x04 +#define CPLD_DEFAULT_BANK 0x01 + +/* Pointer to the CPLD register set */ + +u8 cpld_read(unsigned int reg); +void cpld_write(unsigned int reg, u8 value); + +#define CPLD_READ(reg) cpld_read(offsetof(struct cpld_data, reg)) +#define CPLD_WRITE(reg, value) \ + cpld_write(offsetof(struct cpld_data, reg), value) + diff --git a/board/freescale/t4rdb/law.c b/board/freescale/t4rdb/law.c index 1f58768..39818fc 100644 --- a/board/freescale/t4rdb/law.c +++ b/board/freescale/t4rdb/law.c @@ -16,6 +16,9 @@ struct law_entry law_table[] = { #ifdef CONFIG_SYS_QMAN_MEM_PHYS SET_LAW(CONFIG_SYS_QMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_QMAN), #endif +#ifdef CONFIG_SYS_CPLD_BASE_PHYS + SET_LAW(CONFIG_SYS_CPLD_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_IFC), +#endif #ifdef CONFIG_SYS_DCSRBAR_PHYS /* Limit DCSR to 32M to access NPC Trace Buffer */ SET_LAW(CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_DCSR), diff --git a/board/freescale/t4rdb/t4240rdb.c b/board/freescale/t4rdb/t4240rdb.c index 5448c86..027861f 100644 --- a/board/freescale/t4rdb/t4240rdb.c +++ b/board/freescale/t4rdb/t4240rdb.c @@ -20,14 +20,26 @@ #include <fm_eth.h> #include "t4rdb.h" +#include "cpld.h" DECLARE_GLOBAL_DATA_PTR; int checkboard(void) { struct cpu_type *cpu = gd->arch.cpu; + u8 sw; printf("Board: %sRDB, ", cpu->name); + printf("Board rev: 0x%02x CPLD ver: 0x%02x%02x, ", + CPLD_READ(hw_ver), CPLD_READ(sw_maj_ver), CPLD_READ(sw_min_ver)); + + sw = CPLD_READ(vbank); + sw = sw & CPLD_BANK_SEL_MASK; + + if (sw <= 7) + printf("vBank: %d\n", sw); + else + printf("Unsupported Bank=%x\n", sw); puts("SERDES Reference Clocks:\n"); printf(" SERDES1=100MHz SERDES2=156.25MHz\n" diff --git a/board/freescale/t4rdb/tlb.c b/board/freescale/t4rdb/tlb.c index 4b50bcd..474301e 100644 --- a/board/freescale/t4rdb/tlb.c +++ b/board/freescale/t4rdb/tlb.c @@ -106,6 +106,11 @@ struct fsl_e_tlb_entry tlb_table[] = { MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 16, BOOKE_PAGESZ_64K, 1), #endif +#ifdef CONFIG_SYS_CPLD_BASE + SET_TLB_ENTRY(1, CONFIG_SYS_CPLD_BASE, CONFIG_SYS_CPLD_BASE_PHYS, + MAS3_SW|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 17, BOOKE_PAGESZ_4K, 1), +#endif }; int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/include/configs/T4240RDB.h b/include/configs/T4240RDB.h index 183255d..7b7fce5 100644 --- a/include/configs/T4240RDB.h +++ b/include/configs/T4240RDB.h @@ -513,6 +513,29 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NOR_FTIM2 #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NOR_FTIM3 +/* CPLD on IFC */ +#define CONFIG_SYS_CPLD_BASE 0xffdf0000 +#define CONFIG_SYS_CPLD_BASE_PHYS (0xf00000000ull | CONFIG_SYS_CPLD_BASE) +#define CONFIG_SYS_CSPR3_EXT (0xf) +#define CONFIG_SYS_CSPR3 (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \ + | CSPR_PORT_SIZE_8 \ + | CSPR_MSEL_GPCM \ + | CSPR_V) + +#define CONFIG_SYS_AMASK3 IFC_AMASK(4*1024) +#define CONFIG_SYS_CSOR3 0x0 + +/* CPLD Timing parameters for IFC CS3 */ +#define CONFIG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ + FTIM0_GPCM_TEADC(0x0e) | \ + FTIM0_GPCM_TEAHC(0x0e)) +#define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0x0e) | \ + FTIM1_GPCM_TRAD(0x1f)) +#define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ + FTIM2_GPCM_TCH(0x8) | \ + FTIM2_GPCM_TWP(0x1f)) +#define CONFIG_SYS_CS3_FTIM3 0x0 + #if defined(CONFIG_RAMBOOT_PBL) #define CONFIG_SYS_RAMBOOT #endif -- 1.7.6.5

2 1

[U-Boot] [PATCH] board/t2080qds: add readme for t2080qds
by Shengzhou Liu 25 Nov '14

25 Nov '14

Signed-off-by: Shengzhou Liu <Shengzhou.Liu(a)freescale.com> --- board/freescale/t208xqds/README | 243 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 243 insertions(+) create mode 100755 board/freescale/t208xqds/README diff --git a/board/freescale/t208xqds/README b/board/freescale/t208xqds/README new file mode 100755 index 0000000..e05a10f --- /dev/null +++ b/board/freescale/t208xqds/README @@ -0,0 +1,243 @@ +The T2080QDS is a high-performance computing evaluation, development and +test platform supporting the T2080 QorIQ Power Architecture processor. + +T2080 SoC Overview +------------------ +The T2080 QorIQ multicore processor combines four dual-threaded e6500 Power +Architecture processor cores with high-performance datapath acceleration +logic and network and peripheral bus interfaces required for networking, +telecom/datacom, wireless infrastructure, and mil/aerospace applications. + +T2080 includes the following functions and features: + - Four dual-threads 64-bit Power architecture e6500 cores, up to 1.8GHz + - 2MB L2 cache and 512KB CoreNet platform cache (CPC) + - Hierarchical interconnect fabric + - One 32-/64-bit DDR3/3L SDRAM memory controllers with ECC and interleaving + - Data Path Acceleration Architecture (DPAA) incorporating acceleration + - 16 SerDes lanes up to 10.3125 GHz + - 8 Ethernet interfaces, supporting combinations of the following: + - Up to four 10 Gbps Ethernet MACs + - Up to eight 1 Gbps Ethernet MACs + - Up to four 2.5 Gbps Ethernet MACs + - High-speed peripheral interfaces + - Four PCI Express controllers (two PCIe 2.0 and two PCIe 3.0 with SR-IOV) + - Two Serial RapidIO 2.0 controllers/ports running at up to 5 GHz + - Additional peripheral interfaces + - Two serial ATA (SATA 2.0) controllers + - Two high-speed USB 2.0 controllers with integrated PHY + - Enhanced secure digital host controller (SD/SDHC/SDXC/eMMC) + - Enhanced serial peripheral interface (eSPI) + - Four I2C controllers + - Four 2-pin UARTs or two 4-pin UARTs + - Integrated Flash Controller supporting NAND and NOR flash + - Three eight-channel DMA engines + - Support for hardware virtualization and partitioning enforcement + - QorIQ Platform's Trust Architecture 2.0 + +Differences between T2080 and T2081 +----------------------------------- + Feature T2080 T2081 + 1G Ethernet numbers: 8 6 + 10G Ethernet numbers: 4 2 + SerDes lanes: 16 8 + Serial RapidIO,RMan: 2 no + SATA Controller: 2 no + Aurora: yes no + SoC Package: 896-pins 780-pins + + +T2080QDS feature overview +------------------------- +Processor: + - T2080 SoC integrating four 64-bit dual-threads e6500 cores up to 1.8GHz +Memory: + - Single memory controller capable of supporting DDR3 and DDR3-LV devices + - Two DDR3 DIMMs up to 4GB, Dual rank @ 2133MT/s and ECC support +Ethernet interfaces: + - Two 1Gbps RGMII on-board ports + - Four 10Gbps XFI on-board cages + - 1Gbps/2.5Gbps SGMII Riser card + - 10Gbps XAUI Riser card +Accelerator: + - DPAA components consist of FMan, BMan, QMan, PME, DCE and SEC +SerDes: + - 16 lanes up to 10.3125GHz + - Supports Aurora debug, PEX, SATA, SGMII, sRIO, HiGig, XFI and XAUI +IFC: + - 128MB NOR Flash, 512MB NAND Flash, PromJet debug port and FPGA +eSPI: + - Three SPI flash (16MB N25Q128A + 16MB EN25S64 + 512KB SST25WF040) +USB: + - Two USB2.0 ports with internal PHY (one Type-A + one micro Type-AB) +PCIE: + - Four PCI Express controllers (two PCIe 2.0 and two PCIe 3.0 with SR-IOV) +SATA: + - Two SATA 2.0 ports on-board +SRIO: + - Two Serial RapidIO 2.0 ports up to 5 GHz +eSDHC: + - Supports SD/SDHC/SDXC/eMMC Card +I2C: + - Four I2C controllers. +UART: + - Dual 4-pins UART serial ports +System Logic: + - QIXIS-II FPGA system controll +Debug Features: + - Support Legacy, COP/JTAG, Aurora, Event and EVT + + +System Memory map +----------------- +Start Address End Address Description Size +0xF_FFDF_0000 0xF_FFDF_0FFF IFC - CPLD 4KB +0xF_FF80_0000 0xF_FF80_FFFF IFC - NAND Flash 64KB +0xF_FE00_0000 0xF_FEFF_FFFF CCSRBAR 16MB +0xF_F803_0000 0xF_F803_FFFF PCI Express 4 I/O Space 64KB +0xF_F802_0000 0xF_F802_FFFF PCI Express 3 I/O Space 64KB +0xF_F801_0000 0xF_F801_FFFF PCI Express 2 I/O Space 64KB +0xF_F800_0000 0xF_F800_FFFF PCI Express 1 I/O Space 64KB +0xF_F600_0000 0xF_F7FF_FFFF Queue manager software portal 32MB +0xF_F400_0000 0xF_F5FF_FFFF Buffer manager software portal 32MB +0xF_E800_0000 0xF_EFFF_FFFF IFC - NOR Flash 128MB +0xF_0000_0000 0xF_003F_FFFF DCSR 4MB +0xC_4000_0000 0xC_4FFF_FFFF PCI Express 4 Mem Space 256MB +0xC_3000_0000 0xC_3FFF_FFFF PCI Express 3 Mem Space 256MB +0xC_2000_0000 0xC_2FFF_FFFF PCI Express 2 Mem Space 256MB +0xC_0000_0000 0xC_1FFF_FFFF PCI Express 1 Mem Space 512MB +0x0_0000_0000 0x0_ffff_ffff DDR 4GB + + +128M NOR Flash memory Map +------------------------- +Start Address End Address Definition Max size +0xEFF40000 0xEFFFFFFF u-boot (current bank) 768KB +0xEFF20000 0xEFF3FFFF u-boot env (current bank) 128KB +0xEFF00000 0xEFF1FFFF FMAN Ucode (current bank) 128KB +0xED300000 0xEFEFFFFF rootfs (alt bank) 44MB +0xEC800000 0xEC8FFFFF Hardware device tree (alt bank) 1MB +0xEC020000 0xEC7FFFFF Linux.uImage (alt bank) 7MB + 875KB +0xEC000000 0xEC01FFFF RCW (alt bank) 128KB +0xEBF40000 0xEBFFFFFF u-boot (alt bank) 768KB +0xEBF20000 0xEBF3FFFF u-boot env (alt bank) 128KB +0xEBF00000 0xEBF1FFFF FMAN ucode (alt bank) 128KB +0xE9300000 0xEBEFFFFF rootfs (current bank) 44MB +0xE8800000 0xE88FFFFF Hardware device tree (cur bank) 1MB +0xE8020000 0xE86FFFFF Linux.uImage (current bank) 7MB + 875KB +0xE8000000 0xE801FFFF RCW (current bank) 128KB + + + +Software configurations and board settings +------------------------------------------ +1. NOR boot: + a. build NOR boot image + $ make T2080QDS_config + $ make + b. program u-boot.bin image to NOR flash + => tftp 1000000 u-boot.bin + => pro off all;era eff40000 efffffff;cp.b 1000000 eff40000 $filesize + set SW1[1:8] = '00010011', SW2[1] = '1', SW6[1:4] = '0000' for NOR boot + + Switching between default bank0 and alternate bank4 on NOR flash + To change boot source to vbank4: + by software: run command 'qixis_reset altbank' in u-boot. + by DIP-switch: set SW6[1:4] = '0100' + + To change boot source to vbank0: + by software: run command 'qixis_reset' in u-boot. + by DIP-Switch: set SW6[1:4] = '0000' + +2. NAND Boot: + a. build PBL image for NAND boot + $ make T2080QDS_NAND_config + $ make + b. program u-boot-with-spl-pbl.bin to NAND flash + => tftp 1000000 u-boot-with-spl-pbl.bin + => nand erase 0 $filesize + => nand write 1000000 0 $filesize + set SW1[1:8] = '10000010', SW2[1] = '0' and SW6[1:4] = '1001' for NAND boot + +3. SPI Boot: + a. build PBL image for SPI boot + $ make T2080QDS_SPIFLASH_config + $ make + b. program u-boot-with-spl-pbl.bin to SPI flash + => tftp 1000000 u-boot-with-spl-pbl.bin + => sf probe 0 + => sf erase 0 f0000 + => sf write 1000000 0 $filesize + set SW1[1:8] = '00100010', SW2[1] ='1' for SPI boot + +4. SD Boot: + a. build PBL image for SD boot + $ make T2080QDS_SDCARD_config + $ make + b. program u-boot-with-spl-pbl.bin to SD/MMC card + => tftp 1000000 u-boot-with-spl-pbl.bin + => mmc write 1000000 8 0x800 + => tftp 1000000 fsl_fman_ucode_T2080_xx.bin + => mmc write 1000000 0x820 80 + set SW1[1:8] = '00100000', SW2[1] = '0' for SD boot + + +2-stage NAND/SPI/SD boot loader +------------------------------- +PBL initializes the internal CPC-SRAM and copy SPL(160K) to SRAM. +SPL further initializes DDR using SPD and environment variables +and copy u-boot(768 KB) from NAND/SPI/SD device to DDR. +Finally SPL transers control to u-boot for futher booting. + +SPL has following features: + - Executes within 256K + - No relocation required + +Run time view of SPL framework +------------------------------------------------- +|Area | Address | +------------------------------------------------- +|SecureBoot header | 0xFFFC0000 (32KB) | +------------------------------------------------- +|GD, BD | 0xFFFC8000 (4KB) | +------------------------------------------------- +|ENV | 0xFFFC9000 (8KB) | +------------------------------------------------- +|HEAP | 0xFFFCB000 (50KB) | +------------------------------------------------- +|STACK | 0xFFFD8000 (22KB) | +------------------------------------------------- +|U-boot SPL | 0xFFFD8000 (160KB) | +------------------------------------------------- + +NAND Flash memory Map on T2080QDS +-------------------------------------------------------------- +Start End Definition Size +0x000000 0x0FFFFF u-boot img 1MB (2 blocks) +0x100000 0x17FFFF u-boot env 512KB (1 block) +0x180000 0x1FFFFF FMAN ucode 512KB (1 block) + + +Micro SD Card memory Map on T2080QDS +---------------------------------------------------- +Block #blocks Definition Size +0x008 2048 u-boot img 1MB +0x800 0016 u-boot env 8KB +0x820 0128 FMAN ucode 64KB + + +SPI Flash memory Map on T2080QDS +---------------------------------------------------- +Start End Definition Size +0x000000 0x0FFFFF u-boot img 1MB +0x100000 0x101FFF u-boot env 8KB +0x110000 0x11FFFF FMAN ucode 64KB + + +How to update the ucode of Freescale FMAN +----------------------------------------- +=> tftp 1000000 fsl_fman_ucode_t2080_xx.bin +=> pro off all;erase 0xeff00000 0xeff1ffff;cp 1000000 0xeff00000 $filesize + + +For more details, please refer to T2080QDS User Guide and access +website www.freescale.com and Freescale QorIQ SDK Infocenter document. -- 1.8.0

2 1

[U-Boot] [PATCH] P1023RDB: Update default environment
by Chunhe Lan 25 Nov '14

25 Nov '14

Signed-off-by: Chunhe Lan <Chunhe.Lan(a)freescale.com> --- include/configs/P1023RDB.h | 43 +++++++++++++++++++++++++++++++++++++++++++ 1 files changed, 43 insertions(+), 0 deletions(-) diff --git a/include/configs/P1023RDB.h b/include/configs/P1023RDB.h index ba3da06..6b29add 100644 --- a/include/configs/P1023RDB.h +++ b/include/configs/P1023RDB.h @@ -374,6 +374,49 @@ extern unsigned long get_clock_freq(void); #endif #define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ + "loadaddr=1000000\0" \ + "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ + "tftpflash=tftpboot $loadaddr $uboot; " \ + "protect off $ubootaddr +$filesize; " \ + "erase $ubootaddr +$filesize; " \ + "cp.b $loadaddr $ubootaddr $filesize; " \ + "protect on $ubootaddr +$filesize; " \ + "cmp.b $loadaddr $ubootaddr $filesize\0" \ + "consoledev=ttyS0\0" \ + "ramdiskaddr=2000000\0" \ + "ramdiskfile=rootfs.ext2.gz.uboot\0" \ + "fdtaddr=c00000\0" \ + "fdtfile=p1023rdb.dtb\0" \ + "othbootargs=ramdisk_size=600000\0" \ + "bdev=sda1\0" \ "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0" +#define CONFIG_HDBOOT \ + "setenv bootargs root=/dev/$bdev rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" + +#define CONFIG_NFSBOOTCOMMAND \ + "setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$serverip:$rootpath " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" + +#define CONFIG_RAMBOOTCOMMAND \ + "setenv bootargs root=/dev/ram rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $ramdiskaddr $ramdiskfile;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" + +#define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND + #endif /* __CONFIG_H */ -- 1.7.6.5

2 2

[U-Boot] Raspberry Pi with driver model
by Simon Glass 25 Nov '14

25 Nov '14

Hi Stephen, There was another thread where you reported a hang when booting Raspberry Pi with driver model. It can be repeated by applying this patch and trying to boot with syslinux. http://patchwork.ozlabs.org/patch/392180/ When it hangs, the HDMI display displays lots of spaces, then lots of dots, scrolling forever. The serial console displays nothing further. I narrowed the problem down to writing to address 0. So it is easy to repeat with something like 'mw 0 0'. However I'm really not sure what is going on. Something with driver model seems to make address 0 sensitive to writes. I can't see what that might be, but I don't understand the platform very well. Do you have any ideas? Regards, Simon

3 4