January 2014 - U-Boot

[U-Boot] [PATCH v7 13/17] sf: ops: Unify read_ops bank configuration
by Jagannadha Sutradharudu Teki 12 Jan '14

12 Jan '14

Unified the bar code from read_ops into a spi_flash_bar() Signed-off-by: Jagannadha Sutradharudu Teki <jaganna(a)xilinx.com> --- drivers/mtd/spi/sf_ops.c | 13 +++++-------- 1 file changed, 5 insertions(+), 8 deletions(-) diff --git a/drivers/mtd/spi/sf_ops.c b/drivers/mtd/spi/sf_ops.c index bc4a822..7ae9582 100644 --- a/drivers/mtd/spi/sf_ops.c +++ b/drivers/mtd/spi/sf_ops.c @@ -127,7 +127,7 @@ static int spi_flash_bank(struct spi_flash *flash, u32 offset) return ret; } - return 0; + return bank_sel; } #endif @@ -321,8 +321,9 @@ int spi_flash_read_common(struct spi_flash *flash, const u8 *cmd, int spi_flash_cmd_read_ops(struct spi_flash *flash, u32 offset, size_t len, void *data) { - u8 *cmd, cmdsz, bank_sel = 0; + u8 *cmd, cmdsz; u32 remain_len, read_len; + int bank_sel = 0; int ret = -1; /* Handle memory-mapped SPI */ @@ -346,13 +347,9 @@ int spi_flash_cmd_read_ops(struct spi_flash *flash, u32 offset, cmd[0] = flash->read_cmd; while (len) { #ifdef CONFIG_SPI_FLASH_BAR - bank_sel = offset / SPI_FLASH_16MB_BOUN; - - ret = spi_flash_cmd_bankaddr_write(flash, bank_sel); - if (ret) { - debug("SF: fail to set bank%d\n", bank_sel); + bank_sel = spi_flash_bank(flash, offset); + if (bank_sel < 0) return ret; - } #endif remain_len = (SPI_FLASH_16MB_BOUN * (bank_sel + 1)) - offset; if (len < remain_len) -- 1.8.3

1 0

[U-Boot] [PATCH v7 12/17] sf: Code cleanups
by Jagannadha Sutradharudu Teki 12 Jan '14

12 Jan '14

- comment typo's - func args have a proper names Signed-off-by: Jagannadha Sutradharudu Teki <jaganna(a)xilinx.com> --- drivers/mtd/spi/sf_internal.h | 11 +++-------- drivers/mtd/spi/sf_ops.c | 6 +++--- drivers/mtd/spi/sf_probe.c | 4 ++-- include/spi_flash.h | 5 ++++- 4 files changed, 12 insertions(+), 14 deletions(-) diff --git a/drivers/mtd/spi/sf_internal.h b/drivers/mtd/spi/sf_internal.h index c77961f..6bcd522 100644 --- a/drivers/mtd/spi/sf_internal.h +++ b/drivers/mtd/spi/sf_internal.h @@ -20,11 +20,6 @@ #define SPI_FLASH_CFI_MFR_MACRONIX 0xc2 #define SPI_FLASH_CFI_MFR_WINBOND 0xef -/* SECT flags */ -#define SECT_4K (1 << 1) -#define SECT_32K (1 << 2) -#define E_FSR (1 << 3) - /* Erase commands */ #define CMD_ERASE_4K 0x20 #define CMD_ERASE_32K 0x52 @@ -60,10 +55,10 @@ #endif /* Common status */ -#define STATUS_WIP 0x01 +#define STATUS_WIP (1 << 0) #define STATUS_QEB_WINSPAN (1 << 1) #define STATUS_QEB_MXIC (1 << 6) -#define STATUS_PEC 0x80 +#define STATUS_PEC (1 << 7) /* Flash timeout values */ #define SPI_FLASH_PROG_TIMEOUT (2 * CONFIG_SYS_HZ) @@ -105,7 +100,7 @@ int spi_flash_cmd_erase_ops(struct spi_flash *flash, u32 offset, size_t len); int spi_flash_cmd_read_status(struct spi_flash *flash, u8 *rs); /* Program the status register */ -int spi_flash_cmd_write_status(struct spi_flash *flash, u8 sr); +int spi_flash_cmd_write_status(struct spi_flash *flash, u8 ws); /* Read the config register */ int spi_flash_cmd_read_config(struct spi_flash *flash, u8 *rc); diff --git a/drivers/mtd/spi/sf_ops.c b/drivers/mtd/spi/sf_ops.c index 28527fa..bc4a822 100644 --- a/drivers/mtd/spi/sf_ops.c +++ b/drivers/mtd/spi/sf_ops.c @@ -39,13 +39,13 @@ int spi_flash_cmd_read_status(struct spi_flash *flash, u8 *rs) return 0; } -int spi_flash_cmd_write_status(struct spi_flash *flash, u8 sr) +int spi_flash_cmd_write_status(struct spi_flash *flash, u8 ws) { u8 cmd; int ret; cmd = CMD_WRITE_STATUS; - ret = spi_flash_write_common(flash, &cmd, 1, &sr, 1); + ret = spi_flash_write_common(flash, &cmd, 1, &ws, 1); if (ret < 0) { debug("SF: fail to write status register\n"); return ret; @@ -279,7 +279,7 @@ int spi_flash_cmd_write_ops(struct spi_flash *flash, u32 offset, spi_flash_addr(offset, cmd); - debug("PP: 0x%p => cmd = { 0x%02x 0x%02x%02x%02x } chunk_len = %zu\n", + debug("SF: 0x%p => cmd = { 0x%02x 0x%02x%02x%02x } chunk_len = %zu\n", buf + actual, cmd[0], cmd[1], cmd[2], cmd[3], chunk_len); ret = spi_flash_write_common(flash, cmd, sizeof(cmd), diff --git a/drivers/mtd/spi/sf_probe.c b/drivers/mtd/spi/sf_probe.c index 6b59f2a..ac42b60 100644 --- a/drivers/mtd/spi/sf_probe.c +++ b/drivers/mtd/spi/sf_probe.c @@ -167,7 +167,7 @@ static struct spi_flash *spi_flash_validate_params(struct spi_slave *spi, cmd = spi_read_cmds_array[cmd - 1]; flash->read_cmd = cmd; } else { - /* Go for for default supported read cmd */ + /* Go for default supported read cmd */ flash->read_cmd = CMD_READ_ARRAY_FAST; } @@ -207,7 +207,7 @@ static struct spi_flash *spi_flash_validate_params(struct spi_slave *spi, flash->dummy_byte = 1; } - /* Poll cmd seclection */ + /* Poll cmd selection */ flash->poll_cmd = CMD_READ_STATUS; #ifdef CONFIG_SPI_FLASH_STMICRO if (params->flags & E_FSR) diff --git a/include/spi_flash.h b/include/spi_flash.h index 437937c..213d659 100644 --- a/include/spi_flash.h +++ b/include/spi_flash.h @@ -19,7 +19,10 @@ #include <linux/types.h> #include <linux/compiler.h> -/* No enum list for write commands only QPP */ +/* sf param flags */ +#define SECT_4K 1 << 1 +#define SECT_32K 1 << 2 +#define E_FSR 1 << 3 #define WR_QPP 1 << 4 /* Enum list - Full read commands */ -- 1.8.3

1 0

[U-Boot] [PATCH v7 11/17] sf: Divide flash register ops from QEB code
by Jagannadha Sutradharudu Teki 12 Jan '14

12 Jan '14

QEB code comprises of couple of flash register read/write operations, this patch moved flash register operations on to sf_op Signed-off-by: Jagannadha Sutradharudu Teki <jaganna(a)xilinx.com> --- drivers/mtd/spi/sf_internal.h | 11 ++++--- drivers/mtd/spi/sf_ops.c | 75 +++++++++++++++---------------------------- drivers/mtd/spi/sf_probe.c | 44 +++++++++++++++++++++++++ 3 files changed, 77 insertions(+), 53 deletions(-) diff --git a/drivers/mtd/spi/sf_internal.h b/drivers/mtd/spi/sf_internal.h index c69b53d..c77961f 100644 --- a/drivers/mtd/spi/sf_internal.h +++ b/drivers/mtd/spi/sf_internal.h @@ -101,14 +101,17 @@ int spi_flash_cmd_write(struct spi_slave *spi, const u8 *cmd, size_t cmd_len, /* Flash erase(sectors) operation, support all possible erase commands */ int spi_flash_cmd_erase_ops(struct spi_flash *flash, u32 offset, size_t len); +/* Read the status register */ +int spi_flash_cmd_read_status(struct spi_flash *flash, u8 *rs); + /* Program the status register */ int spi_flash_cmd_write_status(struct spi_flash *flash, u8 sr); -/* Set quad enbale bit for macronix flashes */ -int spi_flash_set_qeb_mxic(struct spi_flash *flash); +/* Read the config register */ +int spi_flash_cmd_read_config(struct spi_flash *flash, u8 *rc); -/* Set quad enbale bit for winbond and spansion flashes */ -int spi_flash_set_qeb_winspan(struct spi_flash *flash); +/* Program the config register */ +int spi_flash_cmd_write_config(struct spi_flash *flash, u8 wc); /* Enable writing on the SPI flash */ static inline int spi_flash_cmd_write_enable(struct spi_flash *flash) diff --git a/drivers/mtd/spi/sf_ops.c b/drivers/mtd/spi/sf_ops.c index 05fbcbd..28527fa 100644 --- a/drivers/mtd/spi/sf_ops.c +++ b/drivers/mtd/spi/sf_ops.c @@ -24,94 +24,71 @@ static void spi_flash_addr(u32 addr, u8 *cmd) cmd[3] = addr >> 0; } -int spi_flash_cmd_write_status(struct spi_flash *flash, u8 sr) +int spi_flash_cmd_read_status(struct spi_flash *flash, u8 *rs) { - u8 cmd; int ret; + u8 cmd; - cmd = CMD_WRITE_STATUS; - ret = spi_flash_write_common(flash, &cmd, 1, &sr, 1); + cmd = CMD_READ_STATUS; + ret = spi_flash_read_common(flash, &cmd, 1, rs, 1); if (ret < 0) { - debug("SF: fail to write status register\n"); + debug("SF: fail to read status register\n"); return ret; } return 0; } -#ifdef CONFIG_SPI_FLASH_MACRONIX -int spi_flash_set_qeb_mxic(struct spi_flash *flash) +int spi_flash_cmd_write_status(struct spi_flash *flash, u8 sr) { - u8 qeb_status; u8 cmd; int ret; - cmd = CMD_READ_STATUS; - ret = spi_flash_read_common(flash, &cmd, 1, &qeb_status, 1); + cmd = CMD_WRITE_STATUS; + ret = spi_flash_write_common(flash, &cmd, 1, &sr, 1); if (ret < 0) { - debug("SF: fail to read status register\n"); + debug("SF: fail to write status register\n"); return ret; } - if (qeb_status & STATUS_QEB_MXIC) { - debug("SF: Quad enable bit is already set\n"); - } else { - ret = spi_flash_cmd_write_status(flash, STATUS_QEB_MXIC); - if (ret < 0) - return ret; - } - - return ret; + return 0; } -#endif #if defined(CONFIG_SPI_FLASH_SPANSION) || defined(CONFIG_SPI_FLASH_WINBOND) -static int spi_flash_cmd_write_config(struct spi_flash *flash, u8 cr) +int spi_flash_cmd_read_config(struct spi_flash *flash, u8 *rc) { - u8 data[2]; - u8 cmd; int ret; + u8 cmd; - cmd = CMD_READ_STATUS; - ret = spi_flash_read_common(flash, &cmd, 1, &data[0], 1); + cmd = CMD_READ_CONFIG; + ret = spi_flash_read_common(flash, &cmd, 1, rc, 1); if (ret < 0) { - debug("SF: fail to read status register\n"); - return ret; - } - - cmd = CMD_WRITE_STATUS; - data[1] = cr; - ret = spi_flash_write_common(flash, &cmd, 1, &data, 2); - if (ret) { - debug("SF: fail to write config register\n"); + debug("SF: fail to read config register\n"); return ret; } return 0; } -int spi_flash_set_qeb_winspan(struct spi_flash *flash) +int spi_flash_cmd_write_config(struct spi_flash *flash, u8 wc) { - u8 qeb_status; + u8 data[2]; u8 cmd; int ret; - cmd = CMD_READ_CONFIG; - ret = spi_flash_read_common(flash, &cmd, 1, &qeb_status, 1); - if (ret < 0) { - debug("SF: fail to read config register\n"); + ret = spi_flash_cmd_read_status(flash, &data[0]); + if (ret < 0) return ret; - } - if (qeb_status & STATUS_QEB_WINSPAN) { - debug("SF: Quad enable bit is already set\n"); - } else { - ret = spi_flash_cmd_write_config(flash, STATUS_QEB_WINSPAN); - if (ret < 0) - return ret; + cmd = CMD_WRITE_STATUS; + data[1] = wc; + ret = spi_flash_write_common(flash, &cmd, 1, &data, 2); + if (ret) { + debug("SF: fail to write config register\n"); + return ret; } - return ret; + return 0; } #endif diff --git a/drivers/mtd/spi/sf_probe.c b/drivers/mtd/spi/sf_probe.c index 88d1d0a..6b59f2a 100644 --- a/drivers/mtd/spi/sf_probe.c +++ b/drivers/mtd/spi/sf_probe.c @@ -28,6 +28,50 @@ static u8 spi_read_cmds_array[] = { CMD_READ_QUAD_IO_FAST, }; +#ifdef CONFIG_SPI_FLASH_MACRONIX +static int spi_flash_set_qeb_mxic(struct spi_flash *flash) +{ + u8 qeb_status; + int ret; + + ret = spi_flash_cmd_read_status(flash, &qeb_status); + if (ret < 0) + return ret; + + if (qeb_status & STATUS_QEB_MXIC) { + debug("SF: mxic: QEB is already set\n"); + } else { + ret = spi_flash_cmd_write_status(flash, STATUS_QEB_MXIC); + if (ret < 0) + return ret; + } + + return ret; +} +#endif + +#if defined(CONFIG_SPI_FLASH_SPANSION) || defined(CONFIG_SPI_FLASH_WINBOND) +static int spi_flash_set_qeb_winspan(struct spi_flash *flash) +{ + u8 qeb_status; + int ret; + + ret = spi_flash_cmd_read_config(flash, &qeb_status); + if (ret < 0) + return ret; + + if (qeb_status & STATUS_QEB_WINSPAN) { + debug("SF: winspan: QEB is already set\n"); + } else { + ret = spi_flash_cmd_write_config(flash, STATUS_QEB_WINSPAN); + if (ret < 0) + return ret; + } + + return ret; +} +#endif + static int spi_flash_set_qeb(struct spi_flash *flash, u8 idcode0) { switch (idcode0) { -- 1.8.3

1 0

[U-Boot] [PATCH v7 10/17] sf: probe: Enable macronix quad read/write cmds support
by Jagannadha Sutradharudu Teki 12 Jan '14

12 Jan '14

Added macronix flash quad read/write commands support and it's up to the respective controller driver usecase to configure the respective commands by defining SPI RX/TX operation modes from include/spi.h on the driver. Signed-off-by: Jagannadha Sutradharudu Teki <jaganna(a)xilinx.com> --- drivers/mtd/spi/sf_params.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/mtd/spi/sf_params.c b/drivers/mtd/spi/sf_params.c index ad101fb..4cdb4c2 100644 --- a/drivers/mtd/spi/sf_params.c +++ b/drivers/mtd/spi/sf_params.c @@ -40,10 +40,10 @@ const struct spi_flash_params spi_flash_params_table[] = { {"MX25L1605D", 0xc22015, 0x0, 64 * 1024, 32, 0, 0}, {"MX25L3205D", 0xc22016, 0x0, 64 * 1024, 64, 0, 0}, {"MX25L6405D", 0xc22017, 0x0, 64 * 1024, 128, 0, 0}, - {"MX25L12805", 0xc22018, 0x0, 64 * 1024, 256, 0, 0}, - {"MX25L25635F", 0xc22019, 0x0, 64 * 1024, 512, 0, 0}, - {"MX25L51235F", 0xc2201a, 0x0, 64 * 1024, 1024, 0, 0}, - {"MX25L12855E", 0xc22618, 0x0, 64 * 1024, 256, 0, 0}, + {"MX25L12805", 0xc22018, 0x0, 64 * 1024, 256, RD_FULL, WR_QPP}, + {"MX25L25635F", 0xc22019, 0x0, 64 * 1024, 512, RD_FULL, WR_QPP}, + {"MX25L51235F", 0xc2201a, 0x0, 64 * 1024, 1024, RD_FULL, WR_QPP}, + {"MX25L12855E", 0xc22618, 0x0, 64 * 1024, 256, RD_FULL, WR_QPP}, #endif #ifdef CONFIG_SPI_FLASH_SPANSION /* SPANSION */ {"S25FL008A", 0x010213, 0x0, 64 * 1024, 16, 0, 0}, -- 1.8.3

1 0

[U-Boot] [PATCH v7 09/17] sf: Add macronix set QEB support
by Jagannadha Sutradharudu Teki 12 Jan '14

12 Jan '14

This patch adds set QEB support for macronix flash devices which are trying to program/read quad operations. Signed-off-by: Jagannadha Sutradharudu Teki <jaganna(a)xilinx.com> --- drivers/mtd/spi/sf_internal.h | 5 +++++ drivers/mtd/spi/sf_ops.c | 26 ++++++++++++++++++++++++++ drivers/mtd/spi/sf_probe.c | 4 ++++ 3 files changed, 35 insertions(+) diff --git a/drivers/mtd/spi/sf_internal.h b/drivers/mtd/spi/sf_internal.h index a9f5a81..c69b53d 100644 --- a/drivers/mtd/spi/sf_internal.h +++ b/drivers/mtd/spi/sf_internal.h @@ -17,6 +17,7 @@ /* CFI Manufacture ID's */ #define SPI_FLASH_CFI_MFR_SPANSION 0x01 #define SPI_FLASH_CFI_MFR_STMICRO 0x20 +#define SPI_FLASH_CFI_MFR_MACRONIX 0xc2 #define SPI_FLASH_CFI_MFR_WINBOND 0xef /* SECT flags */ @@ -61,6 +62,7 @@ /* Common status */ #define STATUS_WIP 0x01 #define STATUS_QEB_WINSPAN (1 << 1) +#define STATUS_QEB_MXIC (1 << 6) #define STATUS_PEC 0x80 /* Flash timeout values */ @@ -102,6 +104,9 @@ int spi_flash_cmd_erase_ops(struct spi_flash *flash, u32 offset, size_t len); /* Program the status register */ int spi_flash_cmd_write_status(struct spi_flash *flash, u8 sr); +/* Set quad enbale bit for macronix flashes */ +int spi_flash_set_qeb_mxic(struct spi_flash *flash); + /* Set quad enbale bit for winbond and spansion flashes */ int spi_flash_set_qeb_winspan(struct spi_flash *flash); diff --git a/drivers/mtd/spi/sf_ops.c b/drivers/mtd/spi/sf_ops.c index 6adee32..05fbcbd 100644 --- a/drivers/mtd/spi/sf_ops.c +++ b/drivers/mtd/spi/sf_ops.c @@ -39,6 +39,32 @@ int spi_flash_cmd_write_status(struct spi_flash *flash, u8 sr) return 0; } +#ifdef CONFIG_SPI_FLASH_MACRONIX +int spi_flash_set_qeb_mxic(struct spi_flash *flash) +{ + u8 qeb_status; + u8 cmd; + int ret; + + cmd = CMD_READ_STATUS; + ret = spi_flash_read_common(flash, &cmd, 1, &qeb_status, 1); + if (ret < 0) { + debug("SF: fail to read status register\n"); + return ret; + } + + if (qeb_status & STATUS_QEB_MXIC) { + debug("SF: Quad enable bit is already set\n"); + } else { + ret = spi_flash_cmd_write_status(flash, STATUS_QEB_MXIC); + if (ret < 0) + return ret; + } + + return ret; +} +#endif + #if defined(CONFIG_SPI_FLASH_SPANSION) || defined(CONFIG_SPI_FLASH_WINBOND) static int spi_flash_cmd_write_config(struct spi_flash *flash, u8 cr) { diff --git a/drivers/mtd/spi/sf_probe.c b/drivers/mtd/spi/sf_probe.c index 8bd06ee..88d1d0a 100644 --- a/drivers/mtd/spi/sf_probe.c +++ b/drivers/mtd/spi/sf_probe.c @@ -31,6 +31,10 @@ static u8 spi_read_cmds_array[] = { static int spi_flash_set_qeb(struct spi_flash *flash, u8 idcode0) { switch (idcode0) { +#ifdef CONFIG_SPI_FLASH_MACRONIX + case SPI_FLASH_CFI_MFR_MACRONIX: + return spi_flash_set_qeb_mxic(flash); +#endif #if defined(CONFIG_SPI_FLASH_SPANSION) || defined(CONFIG_SPI_FLASH_WINBOND) case SPI_FLASH_CFI_MFR_SPANSION: case SPI_FLASH_CFI_MFR_WINBOND: -- 1.8.3

1 0

[U-Boot] [PATCH v7 08/17] sf: Discover read dummy_byte
by Jagannadha Sutradharudu Teki 12 Jan '14

12 Jan '14

Discovered the read dummy_byte based on the configured read command. Signed-off-by: Jagannadha Sutradharudu Teki <jaganna(a)xilinx.com> --- drivers/mtd/spi/sf_internal.h | 2 ++ drivers/mtd/spi/sf_ops.c | 16 +++++++++------- drivers/mtd/spi/sf_probe.c | 19 +++++++++++++++++++ include/spi_flash.h | 2 ++ 4 files changed, 32 insertions(+), 7 deletions(-) diff --git a/drivers/mtd/spi/sf_internal.h b/drivers/mtd/spi/sf_internal.h index 7be0292..a9f5a81 100644 --- a/drivers/mtd/spi/sf_internal.h +++ b/drivers/mtd/spi/sf_internal.h @@ -10,6 +10,8 @@ #ifndef _SF_INTERNAL_H_ #define _SF_INTERNAL_H_ +#define SPI_FLASH_3B_ADDR_LEN 3 +#define SPI_FLASH_CMD_LEN (1 + SPI_FLASH_3B_ADDR_LEN) #define SPI_FLASH_16MB_BOUN 0x1000000 /* CFI Manufacture ID's */ diff --git a/drivers/mtd/spi/sf_ops.c b/drivers/mtd/spi/sf_ops.c index 827f719..6adee32 100644 --- a/drivers/mtd/spi/sf_ops.c +++ b/drivers/mtd/spi/sf_ops.c @@ -9,6 +9,7 @@ */ #include <common.h> +#include <malloc.h> #include <spi.h> #include <spi_flash.h> #include <watchdog.h> @@ -216,7 +217,7 @@ int spi_flash_write_common(struct spi_flash *flash, const u8 *cmd, int spi_flash_cmd_erase_ops(struct spi_flash *flash, u32 offset, size_t len) { u32 erase_size; - u8 cmd[4]; + u8 cmd[SPI_FLASH_CMD_LEN]; int ret = -1; erase_size = flash->erase_size; @@ -255,7 +256,7 @@ int spi_flash_cmd_write_ops(struct spi_flash *flash, u32 offset, { unsigned long byte_addr, page_size; size_t chunk_len, actual; - u8 cmd[4]; + u8 cmd[SPI_FLASH_CMD_LEN]; int ret = -1; page_size = flash->page_size; @@ -317,7 +318,7 @@ int spi_flash_read_common(struct spi_flash *flash, const u8 *cmd, int spi_flash_cmd_read_ops(struct spi_flash *flash, u32 offset, size_t len, void *data) { - u8 cmd[5], bank_sel = 0; + u8 *cmd, cmdsz, bank_sel = 0; u32 remain_len, read_len; int ret = -1; @@ -335,9 +336,11 @@ int spi_flash_cmd_read_ops(struct spi_flash *flash, u32 offset, return 0; } - cmd[0] = flash->read_cmd; - cmd[4] = 0x00; + cmdsz = SPI_FLASH_CMD_LEN + flash->dummy_byte; + cmd = malloc(cmdsz); + memset(cmd, 0, cmdsz); + cmd[0] = flash->read_cmd; while (len) { #ifdef CONFIG_SPI_FLASH_BAR bank_sel = offset / SPI_FLASH_16MB_BOUN; @@ -356,8 +359,7 @@ int spi_flash_cmd_read_ops(struct spi_flash *flash, u32 offset, spi_flash_addr(offset, cmd); - ret = spi_flash_read_common(flash, cmd, sizeof(cmd), - data, read_len); + ret = spi_flash_read_common(flash, cmd, cmdsz, data, read_len); if (ret < 0) { debug("SF: read failed\n"); break; diff --git a/drivers/mtd/spi/sf_probe.c b/drivers/mtd/spi/sf_probe.c index a049e72..8bd06ee 100644 --- a/drivers/mtd/spi/sf_probe.c +++ b/drivers/mtd/spi/sf_probe.c @@ -140,6 +140,25 @@ static struct spi_flash *spi_flash_validate_params(struct spi_slave *spi, } } + /* Read dummy_byte: dummy byte is determined based on the + * dummy cycles of a particular command. + * Fast commands - dummy_byte = dummy_cycles/8 + * I/O commands- dummy_byte = (dummy_cycles * no.of lines)/8 + * For I/O commands except cmd[0] everything goes on no.of lines + * based on particular command but incase of fast commands except + * data all go on single line irrespective of command. + */ + switch (flash->read_cmd) { + case CMD_READ_QUAD_IO_FAST: + flash->dummy_byte = 2; + break; + case CMD_READ_ARRAY_SLOW: + flash->dummy_byte = 0; + break; + default: + flash->dummy_byte = 1; + } + /* Poll cmd seclection */ flash->poll_cmd = CMD_READ_STATUS; #ifdef CONFIG_SPI_FLASH_STMICRO diff --git a/include/spi_flash.h b/include/spi_flash.h index 99724a0..437937c 100644 --- a/include/spi_flash.h +++ b/include/spi_flash.h @@ -72,6 +72,7 @@ extern const struct spi_flash_params spi_flash_params_table[]; * @erase_cmd: Erase cmd 4K, 32K, 64K * @read_cmd: Read cmd - Array Fast, Extn read and quad read. * @write_cmd: Write cmd - page and quad program. + * @dummy_byte: Dummy cycles for read operation. * @memory_map: Address of read-only SPI flash access * @read: Flash read ops: Read len bytes at offset into buf * Supported cmds: Fast Array Read @@ -98,6 +99,7 @@ struct spi_flash { u8 erase_cmd; u8 read_cmd; u8 write_cmd; + u8 dummy_byte; void *memory_map; int (*read)(struct spi_flash *flash, u32 offset, size_t len, void *buf); -- 1.8.3

1 0

[U-Boot] [PATCH v7 07/17] sf: Add QUAD_IO_FAST read support
by Jagannadha Sutradharudu Teki 12 Jan '14

12 Jan '14

This patch adds support QUAD_IO_FAST read command. Signed-off-by: Jagannadha Sutradharudu Teki <jaganna(a)xilinx.com> --- drivers/mtd/spi/sf_internal.h | 1 + drivers/mtd/spi/sf_probe.c | 2 ++ include/spi.h | 4 +++- include/spi_flash.h | 3 ++- 4 files changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/mtd/spi/sf_internal.h b/drivers/mtd/spi/sf_internal.h index dca34f7..7be0292 100644 --- a/drivers/mtd/spi/sf_internal.h +++ b/drivers/mtd/spi/sf_internal.h @@ -45,6 +45,7 @@ #define CMD_READ_DUAL_OUTPUT_FAST 0x3b #define CMD_READ_DUAL_IO_FAST 0xbb #define CMD_READ_QUAD_OUTPUT_FAST 0x6b +#define CMD_READ_QUAD_IO_FAST 0xeb #define CMD_READ_ID 0x9f /* Bank addr access commands */ diff --git a/drivers/mtd/spi/sf_probe.c b/drivers/mtd/spi/sf_probe.c index d95c8b9..a049e72 100644 --- a/drivers/mtd/spi/sf_probe.c +++ b/drivers/mtd/spi/sf_probe.c @@ -25,6 +25,7 @@ static u8 spi_read_cmds_array[] = { CMD_READ_DUAL_OUTPUT_FAST, CMD_READ_DUAL_IO_FAST, CMD_READ_QUAD_OUTPUT_FAST, + CMD_READ_QUAD_IO_FAST, }; static int spi_flash_set_qeb(struct spi_flash *flash, u8 idcode0) @@ -131,6 +132,7 @@ static struct spi_flash *spi_flash_validate_params(struct spi_slave *spi, /* Set the quad enable bit - only for quad commands */ if ((flash->read_cmd == CMD_READ_QUAD_OUTPUT_FAST) || + (flash->read_cmd == CMD_READ_QUAD_IO_FAST) || (flash->write_cmd == CMD_QUAD_PAGE_PROGRAM)) { if (spi_flash_set_qeb(flash, idcode[0])) { debug("SF: Fail to set QEB for %02x\n", idcode[0]); diff --git a/include/spi.h b/include/spi.h index 5dd490a..c8a9d87 100644 --- a/include/spi.h +++ b/include/spi.h @@ -39,8 +39,10 @@ #define SPI_OPM_RX_DOUT 1 << 1 #define SPI_OPM_RX_DIO 1 << 2 #define SPI_OPM_RX_QOF 1 << 3 +#define SPI_OPM_RX_QIOF 1 << 4 #define SPI_OPM_RX_EXTN SPI_OPM_RX_AS | SPI_OPM_RX_DOUT | \ - SPI_OPM_RX_DIO | SPI_OPM_RX_QOF + SPI_OPM_RX_DIO | SPI_OPM_RX_QOF | \ + SPI_OPM_RX_QIOF /* Header byte that marks the start of the message */ #define SPI_PREAMBLE_END_BYTE 0xec diff --git a/include/spi_flash.h b/include/spi_flash.h index 8e0bb46..99724a0 100644 --- a/include/spi_flash.h +++ b/include/spi_flash.h @@ -28,9 +28,10 @@ enum spi_read_cmds { DUAL_OUTPUT_FAST = 1 << 1, DUAL_IO_FAST = 1 << 2, QUAD_OUTPUT_FAST = 1 << 3, + QUAD_IO_FAST = 1 << 4, }; #define RD_EXTN ARRAY_SLOW | DUAL_OUTPUT_FAST | DUAL_IO_FAST -#define RD_FULL RD_EXTN | QUAD_OUTPUT_FAST +#define RD_FULL RD_EXTN | QUAD_OUTPUT_FAST | QUAD_IO_FAST /** * struct spi_flash_params - SPI/QSPI flash device params structure -- 1.8.3

1 0

[U-Boot] [PATCH v7 06/17] sf: Separate the flash params table
by Jagannadha Sutradharudu Teki 12 Jan '14

12 Jan '14

Moved the flash params table from sf_probe.c and placed on to sf_params.c, hence flash params file will alter based on new addons. Signed-off-by: Jagannadha Sutradharudu Teki <jaganna(a)xilinx.com> --- drivers/mtd/spi/Makefile | 4 +- drivers/mtd/spi/sf_params.c | 130 +++++++++++++++++++++++++++++++++++++++ drivers/mtd/spi/sf_probe.c | 146 +------------------------------------------- include/spi_flash.h | 23 +++++++ 4 files changed, 158 insertions(+), 145 deletions(-) create mode 100644 drivers/mtd/spi/sf_params.c diff --git a/drivers/mtd/spi/Makefile b/drivers/mtd/spi/Makefile index 26483a2..9e18fb4 100644 --- a/drivers/mtd/spi/Makefile +++ b/drivers/mtd/spi/Makefile @@ -10,8 +10,8 @@ obj-$(CONFIG_SPL_SPI_LOAD) += spi_spl_load.o obj-$(CONFIG_SPL_SPI_BOOT) += fsl_espi_spl.o endif -obj-$(CONFIG_CMD_SF) += sf.o -obj-$(CONFIG_SPI_FLASH) += sf_probe.o sf_ops.o +obj-$(CONFIG_CMD_SF) += sf.o +obj-$(CONFIG_SPI_FLASH) += sf_params.o sf_probe.o sf_ops.o obj-$(CONFIG_SPI_FRAM_RAMTRON) += ramtron.o obj-$(CONFIG_SPI_FLASH_SANDBOX) += sandbox.o obj-$(CONFIG_SPI_M95XXX) += eeprom_m95xxx.o diff --git a/drivers/mtd/spi/sf_params.c b/drivers/mtd/spi/sf_params.c new file mode 100644 index 0000000..ad101fb --- /dev/null +++ b/drivers/mtd/spi/sf_params.c @@ -0,0 +1,130 @@ +/* + * SPI flash Params table + * + * Copyright (C) 2013 Jagannadha Sutradharudu Teki, Xilinx Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <spi_flash.h> + +#include "sf_internal.h" + +/* SPI/QSPI flash device params structure */ +const struct spi_flash_params spi_flash_params_table[] = { +#ifdef CONFIG_SPI_FLASH_ATMEL /* ATMEL */ + {"AT45DB011D", 0x1f2200, 0x0, 64 * 1024, 4, 0, SECT_4K}, + {"AT45DB021D", 0x1f2300, 0x0, 64 * 1024, 8, 0, SECT_4K}, + {"AT45DB041D", 0x1f2400, 0x0, 64 * 1024, 8, 0, SECT_4K}, + {"AT45DB081D", 0x1f2500, 0x0, 64 * 1024, 16, 0, SECT_4K}, + {"AT45DB161D", 0x1f2600, 0x0, 64 * 1024, 32, 0, SECT_4K}, + {"AT45DB321D", 0x1f2700, 0x0, 64 * 1024, 64, 0, SECT_4K}, + {"AT45DB641D", 0x1f2800, 0x0, 64 * 1024, 128, 0, SECT_4K}, + {"AT25DF321", 0x1f4701, 0x0, 64 * 1024, 64, 0, SECT_4K}, +#endif +#ifdef CONFIG_SPI_FLASH_EON /* EON */ + {"EN25Q32B", 0x1c3016, 0x0, 64 * 1024, 64, 0, 0}, + {"EN25Q64", 0x1c3017, 0x0, 64 * 1024, 128, 0, SECT_4K}, + {"EN25Q128B", 0x1c3018, 0x0, 64 * 1024, 256, 0, 0}, + {"EN25S64", 0x1c3817, 0x0, 64 * 1024, 128, 0, 0}, +#endif +#ifdef CONFIG_SPI_FLASH_GIGADEVICE /* GIGADEVICE */ + {"GD25Q64B", 0xc84017, 0x0, 64 * 1024, 128, 0, SECT_4K}, + {"GD25LQ32", 0xc86016, 0x0, 64 * 1024, 64, 0, SECT_4K}, +#endif +#ifdef CONFIG_SPI_FLASH_MACRONIX /* MACRONIX */ + {"MX25L2006E", 0xc22012, 0x0, 64 * 1024, 4, 0, 0}, + {"MX25L4005", 0xc22013, 0x0, 64 * 1024, 8, 0, 0}, + {"MX25L8005", 0xc22014, 0x0, 64 * 1024, 16, 0, 0}, + {"MX25L1605D", 0xc22015, 0x0, 64 * 1024, 32, 0, 0}, + {"MX25L3205D", 0xc22016, 0x0, 64 * 1024, 64, 0, 0}, + {"MX25L6405D", 0xc22017, 0x0, 64 * 1024, 128, 0, 0}, + {"MX25L12805", 0xc22018, 0x0, 64 * 1024, 256, 0, 0}, + {"MX25L25635F", 0xc22019, 0x0, 64 * 1024, 512, 0, 0}, + {"MX25L51235F", 0xc2201a, 0x0, 64 * 1024, 1024, 0, 0}, + {"MX25L12855E", 0xc22618, 0x0, 64 * 1024, 256, 0, 0}, +#endif +#ifdef CONFIG_SPI_FLASH_SPANSION /* SPANSION */ + {"S25FL008A", 0x010213, 0x0, 64 * 1024, 16, 0, 0}, + {"S25FL016A", 0x010214, 0x0, 64 * 1024, 32, 0, 0}, + {"S25FL032A", 0x010215, 0x0, 64 * 1024, 64, 0, 0}, + {"S25FL064A", 0x010216, 0x0, 64 * 1024, 128, 0, 0}, + {"S25FL128P_256K", 0x012018, 0x0300, 256 * 1024, 64, RD_FULL, WR_QPP}, + {"S25FL128P_64K", 0x012018, 0x0301, 64 * 1024, 256, RD_FULL, WR_QPP}, + {"S25FL032P", 0x010215, 0x4d00, 64 * 1024, 64, RD_FULL, WR_QPP}, + {"S25FL064P", 0x010216, 0x4d00, 64 * 1024, 128, RD_FULL, WR_QPP}, + {"S25FL128S_64K", 0x012018, 0x4d01, 64 * 1024, 256, RD_FULL, WR_QPP}, + {"S25FL256S_256K", 0x010219, 0x4d00, 64 * 1024, 512, RD_FULL, WR_QPP}, + {"S25FL256S_64K", 0x010219, 0x4d01, 64 * 1024, 512, RD_FULL, WR_QPP}, + {"S25FL512S_256K", 0x010220, 0x4d00, 64 * 1024, 1024, RD_FULL, WR_QPP}, + {"S25FL512S_64K", 0x010220, 0x4d01, 64 * 1024, 1024, RD_FULL, WR_QPP}, +#endif +#ifdef CONFIG_SPI_FLASH_STMICRO /* STMICRO */ + {"M25P10", 0x202011, 0x0, 32 * 1024, 4, 0, 0}, + {"M25P20", 0x202012, 0x0, 64 * 1024, 4, 0, 0}, + {"M25P40", 0x202013, 0x0, 64 * 1024, 8, 0, 0}, + {"M25P80", 0x202014, 0x0, 64 * 1024, 16, 0, 0}, + {"M25P16", 0x202015, 0x0, 64 * 1024, 32, 0, 0}, + {"M25P32", 0x202016, 0x0, 64 * 1024, 64, 0, 0}, + {"M25P64", 0x202017, 0x0, 64 * 1024, 128, 0, 0}, + {"M25P128", 0x202018, 0x0, 256 * 1024, 64, 0, 0}, + {"N25Q32", 0x20ba16, 0x0, 64 * 1024, 64, RD_FULL, WR_QPP | SECT_4K}, + {"N25Q32A", 0x20bb16, 0x0, 64 * 1024, 64, RD_FULL, WR_QPP | SECT_4K}, + {"N25Q64", 0x20ba17, 0x0, 64 * 1024, 128, RD_FULL, WR_QPP | SECT_4K}, + {"N25Q64A", 0x20bb17, 0x0, 64 * 1024, 128, RD_FULL, WR_QPP | SECT_4K}, + {"N25Q128", 0x20ba18, 0x0, 64 * 1024, 256, RD_FULL, WR_QPP | SECT_4K}, + {"N25Q128A", 0x20bb18, 0x0, 64 * 1024, 256, RD_FULL, WR_QPP | SECT_4K}, + {"N25Q256", 0x20ba19, 0x0, 64 * 1024, 512, RD_FULL, WR_QPP | SECT_4K}, + {"N25Q256A", 0x20bb19, 0x0, 64 * 1024, 512, RD_FULL, WR_QPP | SECT_4K}, + {"N25Q512", 0x20ba20, 0x0, 64 * 1024, 1024, RD_FULL, WR_QPP | E_FSR | SECT_4K}, + {"N25Q512A", 0x20bb20, 0x0, 64 * 1024, 1024, RD_FULL, WR_QPP | E_FSR | SECT_4K}, + {"N25Q1024", 0x20ba21, 0x0, 64 * 1024, 2048, RD_FULL, WR_QPP | E_FSR | SECT_4K}, + {"N25Q1024A", 0x20bb21, 0x0, 64 * 1024, 2048, RD_FULL, WR_QPP | E_FSR | SECT_4K}, +#endif +#ifdef CONFIG_SPI_FLASH_SST /* SST */ + {"SST25VF040B", 0xbf258d, 0x0, 64 * 1024, 8, 0, SECT_4K | SST_WP}, + {"SST25VF080B", 0xbf258e, 0x0, 64 * 1024, 16, 0, SECT_4K | SST_WP}, + {"SST25VF016B", 0xbf2541, 0x0, 64 * 1024, 32, 0, SECT_4K | SST_WP}, + {"SST25VF032B", 0xbf254a, 0x0, 64 * 1024, 64, 0, SECT_4K | SST_WP}, + {"SST25VF064C", 0xbf254b, 0x0, 64 * 1024, 128, 0, SECT_4K}, + {"SST25WF512", 0xbf2501, 0x0, 64 * 1024, 1, 0, SECT_4K | SST_WP}, + {"SST25WF010", 0xbf2502, 0x0, 64 * 1024, 2, 0, SECT_4K | SST_WP}, + {"SST25WF020", 0xbf2503, 0x0, 64 * 1024, 4, 0, SECT_4K | SST_WP}, + {"SST25WF040", 0xbf2504, 0x0, 64 * 1024, 8, 0, SECT_4K | SST_WP}, + {"SST25WF080", 0xbf2505, 0x0, 64 * 1024, 16, 0, SECT_4K | SST_WP}, +#endif +#ifdef CONFIG_SPI_FLASH_WINBOND /* WINBOND */ + {"W25P80", 0xef2014, 0x0, 64 * 1024, 16, 0, 0}, + {"W25P16", 0xef2015, 0x0, 64 * 1024, 32, 0, 0}, + {"W25P32", 0xef2016, 0x0, 64 * 1024, 64, 0, 0}, + {"W25X40", 0xef3013, 0x0, 64 * 1024, 8, 0, SECT_4K}, + {"W25X16", 0xef3015, 0x0, 64 * 1024, 32, 0, SECT_4K}, + {"W25X32", 0xef3016, 0x0, 64 * 1024, 64, 0, SECT_4K}, + {"W25X64", 0xef3017, 0x0, 64 * 1024, 128, 0, SECT_4K}, + {"W25Q80BL", 0xef4014, 0x0, 64 * 1024, 16, RD_FULL, WR_QPP | SECT_4K}, + {"W25Q16CL", 0xef4015, 0x0, 64 * 1024, 32, RD_FULL, WR_QPP | SECT_4K}, + {"W25Q32BV", 0xef4016, 0x0, 64 * 1024, 64, RD_FULL, WR_QPP | SECT_4K}, + {"W25Q64CV", 0xef4017, 0x0, 64 * 1024, 128, RD_FULL, WR_QPP | SECT_4K}, + {"W25Q128BV", 0xef4018, 0x0, 64 * 1024, 256, RD_FULL, WR_QPP | SECT_4K}, + {"W25Q256", 0xef4019, 0x0, 64 * 1024, 512, RD_FULL, WR_QPP | SECT_4K}, + {"W25Q80BW", 0xef5014, 0x0, 64 * 1024, 16, RD_FULL, WR_QPP | SECT_4K}, + {"W25Q16DW", 0xef6015, 0x0, 64 * 1024, 32, RD_FULL, WR_QPP | SECT_4K}, + {"W25Q32DW", 0xef6016, 0x0, 64 * 1024, 64, RD_FULL, WR_QPP | SECT_4K}, + {"W25Q64DW", 0xef6017, 0x0, 64 * 1024, 128, RD_FULL, WR_QPP | SECT_4K}, + {"W25Q128FW", 0xef6018, 0x0, 64 * 1024, 256, RD_FULL, WR_QPP | SECT_4K}, +#endif + /* + * Note: + * Below paired flash devices has similar spi_flash params. + * (S25FL129P_64K, S25FL128S_64K) + * (W25Q80BL, W25Q80BV) + * (W25Q16CL, W25Q16DV) + * (W25Q32BV, W25Q32FV_SPI) + * (W25Q64CV, W25Q64FV_SPI) + * (W25Q128BV, W25Q128FV_SPI) + * (W25Q32DW, W25Q32FV_QPI) + * (W25Q64DW, W25Q64FV_QPI) + * (W25Q128FW, W25Q128FV_QPI) + */ +}; diff --git a/drivers/mtd/spi/sf_probe.c b/drivers/mtd/spi/sf_probe.c index f24bc1b..d95c8b9 100644 --- a/drivers/mtd/spi/sf_probe.c +++ b/drivers/mtd/spi/sf_probe.c @@ -19,144 +19,6 @@ DECLARE_GLOBAL_DATA_PTR; -/** - * struct spi_flash_params - SPI/QSPI flash device params structure - * - * @name: Device name ([MANUFLETTER][DEVTYPE][DENSITY][EXTRAINFO]) - * @jedec: Device jedec ID (0x[1byte_manuf_id][2byte_dev_id]) - * @ext_jedec: Device ext_jedec ID - * @sector_size: Sector size of this device - * @nr_sectors: No.of sectors on this device - * @e_rd_cmd: Enum list for read commands - * @flags: Importent param, for flash specific behaviour - */ -struct spi_flash_params { - const char *name; - u32 jedec; - u16 ext_jedec; - u32 sector_size; - u32 nr_sectors; - u8 e_rd_cmd; - u16 flags; -}; - -static const struct spi_flash_params spi_flash_params_table[] = { -#ifdef CONFIG_SPI_FLASH_ATMEL /* ATMEL */ - {"AT45DB011D", 0x1f2200, 0x0, 64 * 1024, 4, 0, SECT_4K}, - {"AT45DB021D", 0x1f2300, 0x0, 64 * 1024, 8, 0, SECT_4K}, - {"AT45DB041D", 0x1f2400, 0x0, 64 * 1024, 8, 0, SECT_4K}, - {"AT45DB081D", 0x1f2500, 0x0, 64 * 1024, 16, 0, SECT_4K}, - {"AT45DB161D", 0x1f2600, 0x0, 64 * 1024, 32, 0, SECT_4K}, - {"AT45DB321D", 0x1f2700, 0x0, 64 * 1024, 64, 0, SECT_4K}, - {"AT45DB641D", 0x1f2800, 0x0, 64 * 1024, 128, 0, SECT_4K}, - {"AT25DF321", 0x1f4701, 0x0, 64 * 1024, 64, 0, SECT_4K}, -#endif -#ifdef CONFIG_SPI_FLASH_EON /* EON */ - {"EN25Q32B", 0x1c3016, 0x0, 64 * 1024, 64, 0, 0}, - {"EN25Q64", 0x1c3017, 0x0, 64 * 1024, 128, 0, SECT_4K}, - {"EN25Q128B", 0x1c3018, 0x0, 64 * 1024, 256, 0, 0}, - {"EN25S64", 0x1c3817, 0x0, 64 * 1024, 128, 0, 0}, -#endif -#ifdef CONFIG_SPI_FLASH_GIGADEVICE /* GIGADEVICE */ - {"GD25Q64B", 0xc84017, 0x0, 64 * 1024, 128, 0, SECT_4K}, - {"GD25LQ32", 0xc86016, 0x0, 64 * 1024, 64, 0, SECT_4K}, -#endif -#ifdef CONFIG_SPI_FLASH_MACRONIX /* MACRONIX */ - {"MX25L2006E", 0xc22012, 0x0, 64 * 1024, 4, 0, 0}, - {"MX25L4005", 0xc22013, 0x0, 64 * 1024, 8, 0, 0}, - {"MX25L8005", 0xc22014, 0x0, 64 * 1024, 16, 0, 0}, - {"MX25L1605D", 0xc22015, 0x0, 64 * 1024, 32, 0, 0}, - {"MX25L3205D", 0xc22016, 0x0, 64 * 1024, 64, 0, 0}, - {"MX25L6405D", 0xc22017, 0x0, 64 * 1024, 128, 0, 0}, - {"MX25L12805", 0xc22018, 0x0, 64 * 1024, 256, 0, 0}, - {"MX25L25635F", 0xc22019, 0x0, 64 * 1024, 512, 0, 0}, - {"MX25L51235F", 0xc2201a, 0x0, 64 * 1024, 1024, 0, 0}, - {"MX25L12855E", 0xc22618, 0x0, 64 * 1024, 256, 0, 0}, -#endif -#ifdef CONFIG_SPI_FLASH_SPANSION /* SPANSION */ - {"S25FL008A", 0x010213, 0x0, 64 * 1024, 16, 0, 0}, - {"S25FL016A", 0x010214, 0x0, 64 * 1024, 32, 0, 0}, - {"S25FL032A", 0x010215, 0x0, 64 * 1024, 64, 0, 0}, - {"S25FL064A", 0x010216, 0x0, 64 * 1024, 128, 0, 0}, - {"S25FL128P_256K", 0x012018, 0x0300, 256 * 1024, 64, RD_FULL, WR_QPP}, - {"S25FL128P_64K", 0x012018, 0x0301, 64 * 1024, 256, RD_FULL, WR_QPP}, - {"S25FL032P", 0x010215, 0x4d00, 64 * 1024, 64, RD_FULL, WR_QPP}, - {"S25FL064P", 0x010216, 0x4d00, 64 * 1024, 128, RD_FULL, WR_QPP}, - {"S25FL128S_64K", 0x012018, 0x4d01, 64 * 1024, 256, RD_FULL, WR_QPP}, - {"S25FL256S_256K", 0x010219, 0x4d00, 64 * 1024, 512, RD_FULL, WR_QPP}, - {"S25FL256S_64K", 0x010219, 0x4d01, 64 * 1024, 512, RD_FULL, WR_QPP}, - {"S25FL512S_256K", 0x010220, 0x4d00, 64 * 1024, 1024, RD_FULL, WR_QPP}, - {"S25FL512S_64K", 0x010220, 0x4d01, 64 * 1024, 1024, RD_FULL, WR_QPP}, -#endif -#ifdef CONFIG_SPI_FLASH_STMICRO /* STMICRO */ - {"M25P10", 0x202011, 0x0, 32 * 1024, 4, 0, 0}, - {"M25P20", 0x202012, 0x0, 64 * 1024, 4, 0, 0}, - {"M25P40", 0x202013, 0x0, 64 * 1024, 8, 0, 0}, - {"M25P80", 0x202014, 0x0, 64 * 1024, 16, 0, 0}, - {"M25P16", 0x202015, 0x0, 64 * 1024, 32, 0, 0}, - {"M25P32", 0x202016, 0x0, 64 * 1024, 64, 0, 0}, - {"M25P64", 0x202017, 0x0, 64 * 1024, 128, 0, 0}, - {"M25P128", 0x202018, 0x0, 256 * 1024, 64, 0, 0}, - {"N25Q32", 0x20ba16, 0x0, 64 * 1024, 64, RD_FULL, WR_QPP | SECT_4K}, - {"N25Q32A", 0x20bb16, 0x0, 64 * 1024, 64, RD_FULL, WR_QPP | SECT_4K}, - {"N25Q64", 0x20ba17, 0x0, 64 * 1024, 128, RD_FULL, WR_QPP | SECT_4K}, - {"N25Q64A", 0x20bb17, 0x0, 64 * 1024, 128, RD_FULL, WR_QPP | SECT_4K}, - {"N25Q128", 0x20ba18, 0x0, 64 * 1024, 256, RD_FULL, WR_QPP | SECT_4K}, - {"N25Q128A", 0x20bb18, 0x0, 64 * 1024, 256, RD_FULL, WR_QPP | SECT_4K}, - {"N25Q256", 0x20ba19, 0x0, 64 * 1024, 512, RD_FULL, WR_QPP | SECT_4K}, - {"N25Q256A", 0x20bb19, 0x0, 64 * 1024, 512, RD_FULL, WR_QPP | SECT_4K}, - {"N25Q512", 0x20ba20, 0x0, 64 * 1024, 1024, RD_FULL, WR_QPP | E_FSR | SECT_4K}, - {"N25Q512A", 0x20bb20, 0x0, 64 * 1024, 1024, RD_FULL, WR_QPP | E_FSR | SECT_4K}, - {"N25Q1024", 0x20ba21, 0x0, 64 * 1024, 2048, RD_FULL, WR_QPP | E_FSR | SECT_4K}, - {"N25Q1024A", 0x20bb21, 0x0, 64 * 1024, 2048, RD_FULL, WR_QPP | E_FSR | SECT_4K}, -#endif -#ifdef CONFIG_SPI_FLASH_SST /* SST */ - {"SST25VF040B", 0xbf258d, 0x0, 64 * 1024, 8, 0, SECT_4K | SST_WP}, - {"SST25VF080B", 0xbf258e, 0x0, 64 * 1024, 16, 0, SECT_4K | SST_WP}, - {"SST25VF016B", 0xbf2541, 0x0, 64 * 1024, 32, 0, SECT_4K | SST_WP}, - {"SST25VF032B", 0xbf254a, 0x0, 64 * 1024, 64, 0, SECT_4K | SST_WP}, - {"SST25VF064C", 0xbf254b, 0x0, 64 * 1024, 128, 0, SECT_4K}, - {"SST25WF512", 0xbf2501, 0x0, 64 * 1024, 1, 0, SECT_4K | SST_WP}, - {"SST25WF010", 0xbf2502, 0x0, 64 * 1024, 2, 0, SECT_4K | SST_WP}, - {"SST25WF020", 0xbf2503, 0x0, 64 * 1024, 4, 0, SECT_4K | SST_WP}, - {"SST25WF040", 0xbf2504, 0x0, 64 * 1024, 8, 0, SECT_4K | SST_WP}, - {"SST25WF080", 0xbf2505, 0x0, 64 * 1024, 16, 0, SECT_4K | SST_WP}, -#endif -#ifdef CONFIG_SPI_FLASH_WINBOND /* WINBOND */ - {"W25P80", 0xef2014, 0x0, 64 * 1024, 16, 0, 0}, - {"W25P16", 0xef2015, 0x0, 64 * 1024, 32, 0, 0}, - {"W25P32", 0xef2016, 0x0, 64 * 1024, 64, 0, 0}, - {"W25X40", 0xef3013, 0x0, 64 * 1024, 8, 0, SECT_4K}, - {"W25X16", 0xef3015, 0x0, 64 * 1024, 32, 0, SECT_4K}, - {"W25X32", 0xef3016, 0x0, 64 * 1024, 64, 0, SECT_4K}, - {"W25X64", 0xef3017, 0x0, 64 * 1024, 128, 0, SECT_4K}, - {"W25Q80BL", 0xef4014, 0x0, 64 * 1024, 16, RD_FULL, WR_QPP | SECT_4K}, - {"W25Q16CL", 0xef4015, 0x0, 64 * 1024, 32, RD_FULL, WR_QPP | SECT_4K}, - {"W25Q32BV", 0xef4016, 0x0, 64 * 1024, 64, RD_FULL, WR_QPP | SECT_4K}, - {"W25Q64CV", 0xef4017, 0x0, 64 * 1024, 128, RD_FULL, WR_QPP | SECT_4K}, - {"W25Q128BV", 0xef4018, 0x0, 64 * 1024, 256, RD_FULL, WR_QPP | SECT_4K}, - {"W25Q256", 0xef4019, 0x0, 64 * 1024, 512, RD_FULL, WR_QPP | SECT_4K}, - {"W25Q80BW", 0xef5014, 0x0, 64 * 1024, 16, RD_FULL, WR_QPP | SECT_4K}, - {"W25Q16DW", 0xef6015, 0x0, 64 * 1024, 32, RD_FULL, WR_QPP | SECT_4K}, - {"W25Q32DW", 0xef6016, 0x0, 64 * 1024, 64, RD_FULL, WR_QPP | SECT_4K}, - {"W25Q64DW", 0xef6017, 0x0, 64 * 1024, 128, RD_FULL, WR_QPP | SECT_4K}, - {"W25Q128FW", 0xef6018, 0x0, 64 * 1024, 256, RD_FULL, WR_QPP | SECT_4K}, -#endif - /* - * Note: - * Below paired flash devices has similar spi_flash params. - * (S25FL129P_64K, S25FL128S_64K) - * (W25Q80BL, W25Q80BV) - * (W25Q16CL, W25Q16DV) - * (W25Q32BV, W25Q32FV_SPI) - * (W25Q64CV, W25Q64FV_SPI) - * (W25Q128BV, W25Q128FV_SPI) - * (W25Q32DW, W25Q32FV_QPI) - * (W25Q64DW, W25Q64FV_QPI) - * (W25Q128FW, W25Q128FV_QPI) - */ -}; - /* Read commands array */ static u8 spi_read_cmds_array[] = { CMD_READ_ARRAY_SLOW, @@ -189,14 +51,12 @@ static struct spi_flash *spi_flash_validate_params(struct spi_slave *spi, { const struct spi_flash_params *params; struct spi_flash *flash; - int i; u8 cmd; u16 jedec = idcode[1] << 8 | idcode[2]; u16 ext_jedec = idcode[3] << 8 | idcode[4]; - /* Get the flash id (jedec = manuf_id + dev_id, ext_jedec) */ - for (i = 0; i < ARRAY_SIZE(spi_flash_params_table); i++) { - params = &spi_flash_params_table[i]; + params = spi_flash_params_table; + for (; params->name != NULL; params++) { if ((params->jedec >> 16) == idcode[0]) { if ((params->jedec & 0xFFFF) == jedec) { if (params->ext_jedec == 0) @@ -207,7 +67,7 @@ static struct spi_flash *spi_flash_validate_params(struct spi_slave *spi, } } - if (i == ARRAY_SIZE(spi_flash_params_table)) { + if (!params->name) { printf("SF: Unsupported flash IDs: "); printf("manuf %02x, jedec %04x, ext_jedec %04x\n", idcode[0], jedec, ext_jedec); diff --git a/include/spi_flash.h b/include/spi_flash.h index 9fd9d3b..8e0bb46 100644 --- a/include/spi_flash.h +++ b/include/spi_flash.h @@ -33,6 +33,29 @@ enum spi_read_cmds { #define RD_FULL RD_EXTN | QUAD_OUTPUT_FAST /** + * struct spi_flash_params - SPI/QSPI flash device params structure + * + * @name: Device name ([MANUFLETTER][DEVTYPE][DENSITY][EXTRAINFO]) + * @jedec: Device jedec ID (0x[1byte_manuf_id][2byte_dev_id]) + * @ext_jedec: Device ext_jedec ID + * @sector_size: Sector size of this device + * @nr_sectors: No.of sectors on this device + * @e_rd_cmd: Enum list for read commands + * @flags: Importent param, for flash specific behaviour + */ +struct spi_flash_params { + const char *name; + u32 jedec; + u16 ext_jedec; + u32 sector_size; + u32 nr_sectors; + u8 e_rd_cmd; + u16 flags; +}; + +extern const struct spi_flash_params spi_flash_params_table[]; + +/** * struct spi_flash - SPI flash structure * * @spi: SPI slave -- 1.8.3

1 0

[U-Boot] [PATCH v7 05/17] sf: probe: Enable RD_FULL and WR_QPP
by Jagannadha Sutradharudu Teki 12 Jan '14

12 Jan '14

This patch enabled RD_FULL and WR_QPP for supported flashes in micron, winbond and spansion. Remaining parts will be add in future patches. Signed-off-by: Jagannadha Sutradharudu Teki <jaganna(a)xilinx.com> --- drivers/mtd/spi/sf_probe.c | 60 +++++++++++++++++++++++----------------------- 1 file changed, 30 insertions(+), 30 deletions(-) diff --git a/drivers/mtd/spi/sf_probe.c b/drivers/mtd/spi/sf_probe.c index 8b2972c..f24bc1b 100644 --- a/drivers/mtd/spi/sf_probe.c +++ b/drivers/mtd/spi/sf_probe.c @@ -78,15 +78,15 @@ static const struct spi_flash_params spi_flash_params_table[] = { {"S25FL016A", 0x010214, 0x0, 64 * 1024, 32, 0, 0}, {"S25FL032A", 0x010215, 0x0, 64 * 1024, 64, 0, 0}, {"S25FL064A", 0x010216, 0x0, 64 * 1024, 128, 0, 0}, - {"S25FL128P_256K", 0x012018, 0x0300, 256 * 1024, 64, 0, 0}, - {"S25FL128P_64K", 0x012018, 0x0301, 64 * 1024, 256, 0, 0}, - {"S25FL032P", 0x010215, 0x4d00, 64 * 1024, 64, 0, 0}, - {"S25FL064P", 0x010216, 0x4d00, 64 * 1024, 128, 0, 0}, - {"S25FL128S_64K", 0x012018, 0x4d01, 64 * 1024, 256, 0, 0}, + {"S25FL128P_256K", 0x012018, 0x0300, 256 * 1024, 64, RD_FULL, WR_QPP}, + {"S25FL128P_64K", 0x012018, 0x0301, 64 * 1024, 256, RD_FULL, WR_QPP}, + {"S25FL032P", 0x010215, 0x4d00, 64 * 1024, 64, RD_FULL, WR_QPP}, + {"S25FL064P", 0x010216, 0x4d00, 64 * 1024, 128, RD_FULL, WR_QPP}, + {"S25FL128S_64K", 0x012018, 0x4d01, 64 * 1024, 256, RD_FULL, WR_QPP}, {"S25FL256S_256K", 0x010219, 0x4d00, 64 * 1024, 512, RD_FULL, WR_QPP}, {"S25FL256S_64K", 0x010219, 0x4d01, 64 * 1024, 512, RD_FULL, WR_QPP}, - {"S25FL512S_256K", 0x010220, 0x4d00, 64 * 1024, 1024, 0, 0}, - {"S25FL512S_64K", 0x010220, 0x4d01, 64 * 1024, 1024, 0, 0}, + {"S25FL512S_256K", 0x010220, 0x4d00, 64 * 1024, 1024, RD_FULL, WR_QPP}, + {"S25FL512S_64K", 0x010220, 0x4d01, 64 * 1024, 1024, RD_FULL, WR_QPP}, #endif #ifdef CONFIG_SPI_FLASH_STMICRO /* STMICRO */ {"M25P10", 0x202011, 0x0, 32 * 1024, 4, 0, 0}, @@ -97,18 +97,18 @@ static const struct spi_flash_params spi_flash_params_table[] = { {"M25P32", 0x202016, 0x0, 64 * 1024, 64, 0, 0}, {"M25P64", 0x202017, 0x0, 64 * 1024, 128, 0, 0}, {"M25P128", 0x202018, 0x0, 256 * 1024, 64, 0, 0}, - {"N25Q32", 0x20ba16, 0x0, 64 * 1024, 64, 0, SECT_4K}, - {"N25Q32A", 0x20bb16, 0x0, 64 * 1024, 64, 0, SECT_4K}, - {"N25Q64", 0x20ba17, 0x0, 64 * 1024, 128, 0, SECT_4K}, - {"N25Q64A", 0x20bb17, 0x0, 64 * 1024, 128, 0, SECT_4K}, - {"N25Q128", 0x20ba18, 0x0, 64 * 1024, 256, 0, SECT_4K}, - {"N25Q128A", 0x20bb18, 0x0, 64 * 1024, 256, 0, SECT_4K}, - {"N25Q256", 0x20ba19, 0x0, 64 * 1024, 512, 0, SECT_4K}, - {"N25Q256A", 0x20bb19, 0x0, 64 * 1024, 512, 0, SECT_4K}, - {"N25Q512", 0x20ba20, 0x0, 64 * 1024, 1024, 0, E_FSR | SECT_4K}, - {"N25Q512A", 0x20bb20, 0x0, 64 * 1024, 1024, 0, E_FSR | SECT_4K}, - {"N25Q1024", 0x20ba21, 0x0, 64 * 1024, 2048, 0, E_FSR | SECT_4K}, - {"N25Q1024A", 0x20bb21, 0x0, 64 * 1024, 2048, 0, E_FSR | SECT_4K}, + {"N25Q32", 0x20ba16, 0x0, 64 * 1024, 64, RD_FULL, WR_QPP | SECT_4K}, + {"N25Q32A", 0x20bb16, 0x0, 64 * 1024, 64, RD_FULL, WR_QPP | SECT_4K}, + {"N25Q64", 0x20ba17, 0x0, 64 * 1024, 128, RD_FULL, WR_QPP | SECT_4K}, + {"N25Q64A", 0x20bb17, 0x0, 64 * 1024, 128, RD_FULL, WR_QPP | SECT_4K}, + {"N25Q128", 0x20ba18, 0x0, 64 * 1024, 256, RD_FULL, WR_QPP | SECT_4K}, + {"N25Q128A", 0x20bb18, 0x0, 64 * 1024, 256, RD_FULL, WR_QPP | SECT_4K}, + {"N25Q256", 0x20ba19, 0x0, 64 * 1024, 512, RD_FULL, WR_QPP | SECT_4K}, + {"N25Q256A", 0x20bb19, 0x0, 64 * 1024, 512, RD_FULL, WR_QPP | SECT_4K}, + {"N25Q512", 0x20ba20, 0x0, 64 * 1024, 1024, RD_FULL, WR_QPP | E_FSR | SECT_4K}, + {"N25Q512A", 0x20bb20, 0x0, 64 * 1024, 1024, RD_FULL, WR_QPP | E_FSR | SECT_4K}, + {"N25Q1024", 0x20ba21, 0x0, 64 * 1024, 2048, RD_FULL, WR_QPP | E_FSR | SECT_4K}, + {"N25Q1024A", 0x20bb21, 0x0, 64 * 1024, 2048, RD_FULL, WR_QPP | E_FSR | SECT_4K}, #endif #ifdef CONFIG_SPI_FLASH_SST /* SST */ {"SST25VF040B", 0xbf258d, 0x0, 64 * 1024, 8, 0, SECT_4K | SST_WP}, @@ -130,17 +130,17 @@ static const struct spi_flash_params spi_flash_params_table[] = { {"W25X16", 0xef3015, 0x0, 64 * 1024, 32, 0, SECT_4K}, {"W25X32", 0xef3016, 0x0, 64 * 1024, 64, 0, SECT_4K}, {"W25X64", 0xef3017, 0x0, 64 * 1024, 128, 0, SECT_4K}, - {"W25Q80BL", 0xef4014, 0x0, 64 * 1024, 16, 0, SECT_4K}, - {"W25Q16CL", 0xef4015, 0x0, 64 * 1024, 32, 0, SECT_4K}, - {"W25Q32BV", 0xef4016, 0x0, 64 * 1024, 64, 0, SECT_4K}, - {"W25Q64CV", 0xef4017, 0x0, 64 * 1024, 128, 0, SECT_4K}, - {"W25Q128BV", 0xef4018, 0x0, 64 * 1024, 256, 0, SECT_4K}, - {"W25Q256", 0xef4019, 0x0, 64 * 1024, 512, 0, SECT_4K}, - {"W25Q80BW", 0xef5014, 0x0, 64 * 1024, 16, 0, SECT_4K}, - {"W25Q16DW", 0xef6015, 0x0, 64 * 1024, 32, 0, SECT_4K}, - {"W25Q32DW", 0xef6016, 0x0, 64 * 1024, 64, 0, SECT_4K}, - {"W25Q64DW", 0xef6017, 0x0, 64 * 1024, 128, 0, SECT_4K}, - {"W25Q128FW", 0xef6018, 0x0, 64 * 1024, 256, 0, SECT_4K}, + {"W25Q80BL", 0xef4014, 0x0, 64 * 1024, 16, RD_FULL, WR_QPP | SECT_4K}, + {"W25Q16CL", 0xef4015, 0x0, 64 * 1024, 32, RD_FULL, WR_QPP | SECT_4K}, + {"W25Q32BV", 0xef4016, 0x0, 64 * 1024, 64, RD_FULL, WR_QPP | SECT_4K}, + {"W25Q64CV", 0xef4017, 0x0, 64 * 1024, 128, RD_FULL, WR_QPP | SECT_4K}, + {"W25Q128BV", 0xef4018, 0x0, 64 * 1024, 256, RD_FULL, WR_QPP | SECT_4K}, + {"W25Q256", 0xef4019, 0x0, 64 * 1024, 512, RD_FULL, WR_QPP | SECT_4K}, + {"W25Q80BW", 0xef5014, 0x0, 64 * 1024, 16, RD_FULL, WR_QPP | SECT_4K}, + {"W25Q16DW", 0xef6015, 0x0, 64 * 1024, 32, RD_FULL, WR_QPP | SECT_4K}, + {"W25Q32DW", 0xef6016, 0x0, 64 * 1024, 64, RD_FULL, WR_QPP | SECT_4K}, + {"W25Q64DW", 0xef6017, 0x0, 64 * 1024, 128, RD_FULL, WR_QPP | SECT_4K}, + {"W25Q128FW", 0xef6018, 0x0, 64 * 1024, 256, RD_FULL, WR_QPP | SECT_4K}, #endif /* * Note: -- 1.8.3

1 0

[U-Boot] [PATCH v7 04/17] sf: Set quad enable bit support
by Jagannadha Sutradharudu Teki 12 Jan '14

12 Jan '14

This patch provides support to set the quad enable bit on flash. quad enable bit needs to set before performing any quad IO operations on respective SPI flashes. Currently added set quad enable bit for winbond and spansion flash devices. stmicro flash doesn't require to set as qeb is volatile. remaining flash devices support will add in future patches. Signed-off-by: Jagannadha Sutradharudu Teki <jaganna(a)xilinx.com> --- drivers/mtd/spi/sf_internal.h | 10 ++++++++-- drivers/mtd/spi/sf_ops.c | 26 ++++++++++++++++++++++++++ drivers/mtd/spi/sf_probe.c | 28 ++++++++++++++++++++++++++++ 3 files changed, 62 insertions(+), 2 deletions(-) diff --git a/drivers/mtd/spi/sf_internal.h b/drivers/mtd/spi/sf_internal.h index dcc9014..dca34f7 100644 --- a/drivers/mtd/spi/sf_internal.h +++ b/drivers/mtd/spi/sf_internal.h @@ -12,6 +12,11 @@ #define SPI_FLASH_16MB_BOUN 0x1000000 +/* CFI Manufacture ID's */ +#define SPI_FLASH_CFI_MFR_SPANSION 0x01 +#define SPI_FLASH_CFI_MFR_STMICRO 0x20 +#define SPI_FLASH_CFI_MFR_WINBOND 0xef + /* SECT flags */ #define SECT_4K (1 << 1) #define SECT_32K (1 << 2) @@ -52,6 +57,7 @@ /* Common status */ #define STATUS_WIP 0x01 +#define STATUS_QEB_WINSPAN (1 << 1) #define STATUS_PEC 0x80 /* Flash timeout values */ @@ -93,8 +99,8 @@ int spi_flash_cmd_erase_ops(struct spi_flash *flash, u32 offset, size_t len); /* Program the status register */ int spi_flash_cmd_write_status(struct spi_flash *flash, u8 sr); -/* Set quad enbale bit */ -int spi_flash_set_qeb(struct spi_flash *flash); +/* Set quad enbale bit for winbond and spansion flashes */ +int spi_flash_set_qeb_winspan(struct spi_flash *flash); /* Enable writing on the SPI flash */ static inline int spi_flash_cmd_write_enable(struct spi_flash *flash) diff --git a/drivers/mtd/spi/sf_ops.c b/drivers/mtd/spi/sf_ops.c index 39e06ec..827f719 100644 --- a/drivers/mtd/spi/sf_ops.c +++ b/drivers/mtd/spi/sf_ops.c @@ -38,6 +38,7 @@ int spi_flash_cmd_write_status(struct spi_flash *flash, u8 sr) return 0; } +#if defined(CONFIG_SPI_FLASH_SPANSION) || defined(CONFIG_SPI_FLASH_WINBOND) static int spi_flash_cmd_write_config(struct spi_flash *flash, u8 cr) { u8 data[2]; @@ -62,6 +63,31 @@ static int spi_flash_cmd_write_config(struct spi_flash *flash, u8 cr) return 0; } +int spi_flash_set_qeb_winspan(struct spi_flash *flash) +{ + u8 qeb_status; + u8 cmd; + int ret; + + cmd = CMD_READ_CONFIG; + ret = spi_flash_read_common(flash, &cmd, 1, &qeb_status, 1); + if (ret < 0) { + debug("SF: fail to read config register\n"); + return ret; + } + + if (qeb_status & STATUS_QEB_WINSPAN) { + debug("SF: Quad enable bit is already set\n"); + } else { + ret = spi_flash_cmd_write_config(flash, STATUS_QEB_WINSPAN); + if (ret < 0) + return ret; + } + + return ret; +} +#endif + #ifdef CONFIG_SPI_FLASH_BAR static int spi_flash_cmd_bankaddr_write(struct spi_flash *flash, u8 bank_sel) { diff --git a/drivers/mtd/spi/sf_probe.c b/drivers/mtd/spi/sf_probe.c index 3fa7363..8b2972c 100644 --- a/drivers/mtd/spi/sf_probe.c +++ b/drivers/mtd/spi/sf_probe.c @@ -165,6 +165,25 @@ static u8 spi_read_cmds_array[] = { CMD_READ_QUAD_OUTPUT_FAST, }; +static int spi_flash_set_qeb(struct spi_flash *flash, u8 idcode0) +{ + switch (idcode0) { +#if defined(CONFIG_SPI_FLASH_SPANSION) || defined(CONFIG_SPI_FLASH_WINBOND) + case SPI_FLASH_CFI_MFR_SPANSION: + case SPI_FLASH_CFI_MFR_WINBOND: + return spi_flash_set_qeb_winspan(flash); +#endif +#ifdef CONFIG_SPI_FLASH_STMICRO + case SPI_FLASH_CFI_MFR_STMICRO: + debug("SF: QEB is volatile for %02x flash\n", idcode0); + return 0; +#endif + default: + printf("SF: Need set QEB func for %02x flash\n", idcode0); + return -1; + } +} + static struct spi_flash *spi_flash_validate_params(struct spi_slave *spi, u8 *idcode) { @@ -250,6 +269,15 @@ static struct spi_flash *spi_flash_validate_params(struct spi_slave *spi, /* Go for default supported write cmd */ flash->write_cmd = CMD_PAGE_PROGRAM; + /* Set the quad enable bit - only for quad commands */ + if ((flash->read_cmd == CMD_READ_QUAD_OUTPUT_FAST) || + (flash->write_cmd == CMD_QUAD_PAGE_PROGRAM)) { + if (spi_flash_set_qeb(flash, idcode[0])) { + debug("SF: Fail to set QEB for %02x\n", idcode[0]); + return NULL; + } + } + /* Poll cmd seclection */ flash->poll_cmd = CMD_READ_STATUS; #ifdef CONFIG_SPI_FLASH_STMICRO -- 1.8.3

1 0