September 2010 - U-Boot

[U-Boot] Dear Valued Member
by System Administration 24 Sep '10

24 Sep '10

Dear Valued Member, Due to the congestion in all Web mail account and removal of all unused Accounts,we would be shutting down all unused accounts, You will have to confirm your E-mail by filling out your Login Info below after clicking the reply button, or your account will be suspended within 48 hours for security reasons. User Name: .......................................... Password:........................................... Date Of Birth: ..................................... Country Or Territory:............................... After Following the instructions in the sheet,your account will not be interrupted and will continue as normal.Thanks for your attention to this request. We apologize for any inconvenience. Webmaster Case number: 447045727401 Property: Account Security

1 0

[U-Boot] Transfer Alert
by Western Union Herd Office 24 Sep '10

24 Sep '10

-- How are you today? This is to inform you that we have already sent USD5000.00 dollars through Western Union as we have been mandated to transfer the payment of compensation the total sum of USD150, 000.00 through Western Union by the UN government. In this connection, I tried to call yesterday to provide this information via telephone in order to avoid the potential for cyber criminals to laying hold of this vital information, but could not reach you. So I decided to send MTCN, sender's name and relevant information, so you can pick up this USD5000.00 so we can send another USD5000.00 tomorrow as you know, we will be sending only USD5000.00 per day. Please collect this information and go to any Western Union office near you in your country to collect USD5000.00 and email us so we can continue with the amount of rest tomorrow. Mr. Roy Charlton Manager Tel:+2348073280772 Email: wumto44(a)yahoo.com.hk call or email once I picked up this USD5000.00 today. Here is the information from Western Union to collect compensation MTCN: 622 159 4597 Sender's Name: Linda Benson Question: Honesty Answer: Trust Amount: USD5000.00 I am waiting for your call once you pick this transfer Regards Director of Operations Western Union ® Moneytransfer ________________________________________________________________________ This email has been scanned for all viruses by the iMail VirusWall Email Security System. For more information on this proactive email security service working around the clock, around the globe, visit http://viruswall.aserver.com.hk ________________________________________________________________________

1 0

[U-Boot] [PATCH] ARMV7: OMAP3: Update Beagle xM pinmux with USB hub and DVI gpio setup
by Steve Sakoman 24 Sep '10

24 Sep '10

This patch adds missing pinmux setup for 4 GPIO signals used on the Beagle xM: - USB hub reset (gpio_56) - P8 USB hub reset (gpio_63) - DVI enable (gpio_129) - P8 DVI enable (gpio_170) Signed-off-by: Steve Sakoman <steve(a)sakoman.com> --- board/ti/beagle/beagle.h | 4 ++++ 1 files changed, 4 insertions(+), 0 deletions(-) diff --git a/board/ti/beagle/beagle.h b/board/ti/beagle/beagle.h index d860337..f0ca468 100644 --- a/board/ti/beagle/beagle.h +++ b/board/ti/beagle/beagle.h @@ -386,6 +386,10 @@ const omap3_sysinfo sysinfo = { MUX_VAL(CP(UART2_TX), (IDIS | PTD | DIS | M0)) /*UART2_TX*/ #define MUX_BEAGLE_XM() \ + MUX_VAL(CP(GPMC_NCS5), (IDIS | PTD | EN | M4)) /*GPIO_56*/\ + MUX_VAL(CP(GPMC_WAIT0), (IDIS | PTU | EN | M4)) /*GPIO_63*/\ + MUX_VAL(CP(MMC1_DAT7), (IDIS | PTU | EN | M4)) /*GPIO_129*/\ + MUX_VAL(CP(HDQ_SIO), (IDIS | PTU | EN | M4)) /*GPIO_170*/\ MUX_VAL(CP(MCBSP3_DX), (IEN | PTD | DIS | M4)) /*GPIO_140*/\ MUX_VAL(CP(MCBSP3_DR), (IEN | PTD | DIS | M4)) /*GPIO_142*/\ MUX_VAL(CP(MCBSP3_CLKX), (IEN | PTD | DIS | M4)) /*GPIO_141*/\ -- 1.7.0.4

1 0

[U-Boot] Please pull u-boot-ppc4xx/master (updated as reqeusted)
by Stefan Roese 23 Sep '10

23 Sep '10

Hi Wolfgang, please pull the following 4xx fixes into master: The following changes since commit e6e1fb3050351ae96153b1ba6a5bd0a2d745794b: Merge branch 'master' of git://git.denx.de/u-boot-blackfin (2010-09-22 22:36:42 +0200) are available in the git repository at: git://www.denx.de/git/u-boot-ppc4xx.git master Stefan Roese (3): ppc4xx: Fix CATcenter build ppc4xx: POST UART: Use in/out_8() io-accessor functions ppc4xx/fdt/flash: Change fdt_fixup_nor_flash_node() to not rely on cs size arch/powerpc/cpu/ppc4xx/fdt.c | 10 ++-- board/amcc/ebony/flash.c | 31 ++++++++++++ common/fdt_support.c | 51 ++++++++++++++++---- include/configs/CATcenter.h | 23 +-------- include/configs/acadia.h | 8 +++- include/fdt_support.h | 2 +- include/ppc4xx.h | 10 ++++ post/cpu/ppc4xx/uart.c | 105 ++++++++++++++++------------------------- 8 files changed, 138 insertions(+), 102 deletions(-)

2 1

[U-Boot] [GIT PULL][NEXT] mpc83xx: new mpc8308_p1m board, boot larger kernels, other cleanups
by Kim Phillips 23 Sep '10

23 Sep '10

Wolfgang Denk, Please pull a new board (mpc8308_p1m), ability to boot larger kernels, and various other cleanups for the next branch: The following changes since commit d70d8ccc200db8c16a6654cb726c3d74b6640b32: silence config step commands display during MAKEALL builds (2010-09-21 21:46:49 +0200) are available in the git repository at: git://git.denx.de/u-boot-mpc83xx next Ilya Yanok (5): mpc83xx/pcie: make it compile with PCIE2 unconfigured mpc83xx: add support for setting PCIE clocks mpc8308: add SICR{L,H} fields definitions MPC8308RDB: various clean ups mpc8308_p1m: support for MPC8308 P1M board Ira W. Snyder (1): e300: increase CONFIG_SYS_BOOTMAPSZ to allow booting large kernels Kim Phillips (2): mpc83xx: fix pcie build warning mpc83xx: extend CONFIG_SYS_BOOTMAPSZ increase to mpc8308_p1m Peter Tyser (1): 83xx: Remove warmboot parameter from PCI init functions Scott Wood (1): mpc831xerdb: enable mtdparts for NAND MAINTAINERS | 1 + arch/powerpc/cpu/mpc83xx/cpu_init.c | 12 + arch/powerpc/cpu/mpc83xx/pci.c | 6 +- arch/powerpc/cpu/mpc83xx/pcie.c | 44 ++- board/esd/vme8349/pci.c | 2 +- board/freescale/mpc8308rdb/mpc8308rdb.c | 22 +- board/freescale/mpc8308rdb/sdram.c | 31 +-- board/freescale/mpc8313erdb/mpc8313erdb.c | 8 +- board/freescale/mpc8315erdb/mpc8315erdb.c | 8 +- board/freescale/mpc8323erdb/mpc8323erdb.c | 2 +- board/freescale/mpc832xemds/pci.c | 6 +- board/freescale/mpc8349emds/pci.c | 6 +- board/freescale/mpc8349itx/pci.c | 4 +- board/freescale/mpc8360emds/pci.c | 6 +- board/freescale/mpc8360erdk/mpc8360erdk.c | 2 +- board/freescale/mpc837xemds/pci.c | 2 +- board/freescale/mpc837xerdb/pci.c | 4 +- board/matrix_vision/mvblm7/pci.c | 5 +- board/mpc8308_p1m/Makefile | 52 +++ board/mpc8308_p1m/config.mk | 3 + board/mpc8308_p1m/mpc8308_p1m.c | 106 ++++++ board/mpc8308_p1m/sdram.c | 93 +++++ board/sbc8349/pci.c | 2 +- board/sheldon/simpc8313/simpc8313.c | 5 +- board/tqc/tqm834x/pci.c | 2 +- board/ve8313/ve8313.c | 5 +- boards.cfg | 1 + include/configs/MPC8308RDB.h | 50 ++-- include/configs/MPC8313ERDB.h | 13 +- include/configs/MPC8315ERDB.h | 13 +- include/configs/MPC8323ERDB.h | 4 +- include/configs/MPC832XEMDS.h | 4 +- include/configs/MPC8349EMDS.h | 4 +- include/configs/MPC8349ITX.h | 4 +- include/configs/MPC8360EMDS.h | 4 +- include/configs/MPC8360ERDK.h | 4 +- include/configs/MPC837XEMDS.h | 4 +- include/configs/MPC837XERDB.h | 4 +- include/configs/MVBLM7.h | 4 +- include/configs/SIMPC8313.h | 4 +- include/configs/TQM834x.h | 4 +- include/configs/aria.h | 4 +- include/configs/kmeter1.h | 4 +- include/configs/mecp5123.h | 4 +- include/configs/mpc5121ads.h | 4 +- include/configs/mpc8308_p1m.h | 555 +++++++++++++++++++++++++++++ include/configs/pdm360ng.h | 4 +- include/configs/sbc8349.h | 4 +- include/configs/ve8313.h | 4 +- include/configs/vme8349.h | 4 +- include/mpc83xx.h | 52 +++- 51 files changed, 1021 insertions(+), 178 deletions(-) create mode 100644 board/mpc8308_p1m/Makefile create mode 100644 board/mpc8308_p1m/config.mk create mode 100644 board/mpc8308_p1m/mpc8308_p1m.c create mode 100644 board/mpc8308_p1m/sdram.c create mode 100644 include/configs/mpc8308_p1m.h Thanks, Kim

2 1

[U-Boot] Please pull u-boot-ppc4xx/next
by Stefan Roese 23 Sep '10

23 Sep '10

The following changes since commit d70d8ccc200db8c16a6654cb726c3d74b6640b32: silence config step commands display during MAKEALL builds (2010-09-21 21:46:49 +0200) are available in the git repository at: git://www.denx.de/git/u-boot-ppc4xx.git next Matthias Fuchs (1): ppx4xx: remove unused functionality for DU405 boards Stefan Roese (9): ppc4xx: Remove unreferenced file include/405_dimm.h ppc4xx: Move ppc4xx headers to powerpc include directory ppc4xx: Move gpio.h to ppc4xx-gpio.h since its ppc4xx specific ppc4xx: Big header cleanup, mostly PPC440 related ppc4xx: Big header cleanup part 2, mostly PPC405 related ppc4xx: Use common NS16550 driver for PPC4xx UART ppc4xx: Remove now unused CONFIG_UART1_CONSOLE Remove unused CONFIG_SERIAL_SOFTWARE_FIFO feature ppc4xx: Cleanup of PVR detection code in cpu.c Victor Gallardo (1): ppc4xx: Disable trace broadcast for 44x non debug mode README | 19 - arch/i386/lib/board.c | 7 - arch/m68k/lib/board.c | 4 - arch/powerpc/cpu/ppc4xx/40x_spd_sdram.c | 2 +- arch/powerpc/cpu/ppc4xx/44x_spd_ddr.c | 2 +- arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c | 4 +- arch/powerpc/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c | 2 +- arch/powerpc/cpu/ppc4xx/4xx_pci.c | 36 +- arch/powerpc/cpu/ppc4xx/4xx_pcie.c | 2 +- arch/powerpc/cpu/ppc4xx/4xx_uart.c | 827 ++------- arch/powerpc/cpu/ppc4xx/cache.S | 2 +- arch/powerpc/cpu/ppc4xx/cmd_ecctest.c | 2 +- arch/powerpc/cpu/ppc4xx/cpu.c | 146 +- arch/powerpc/cpu/ppc4xx/cpu_init.c | 16 +- arch/powerpc/cpu/ppc4xx/dcr.S | 2 +- arch/powerpc/cpu/ppc4xx/denali_data_eye.c | 2 +- arch/powerpc/cpu/ppc4xx/denali_spd_ddr2.c | 2 +- arch/powerpc/cpu/ppc4xx/ecc.c | 2 +- arch/powerpc/cpu/ppc4xx/fdt.c | 2 +- arch/powerpc/cpu/ppc4xx/gpio.c | 7 +- arch/powerpc/cpu/ppc4xx/interrupts.c | 2 +- arch/powerpc/cpu/ppc4xx/kgdb.S | 2 +- arch/powerpc/cpu/ppc4xx/miiphy.c | 4 +- arch/powerpc/cpu/ppc4xx/reginfo.c | 8 +- arch/powerpc/cpu/ppc4xx/sdram.c | 2 +- arch/powerpc/cpu/ppc4xx/speed.c | 4 +- arch/powerpc/cpu/ppc4xx/start.S | 5 +- arch/powerpc/cpu/ppc4xx/tlb.c | 2 +- arch/powerpc/cpu/ppc4xx/uic.c | 2 +- arch/powerpc/cpu/ppc4xx/xilinx_irq.c | 2 +- arch/powerpc/include/asm/4xx_pcie.h | 2 +- arch/powerpc/include/asm/ppc405.h | 80 + arch/powerpc/include/asm/ppc405cr.h | 105 ++ arch/powerpc/include/asm/ppc405ep.h | 252 +++ arch/powerpc/include/asm/ppc405ex.h | 90 + arch/powerpc/include/asm/ppc405ez.h | 102 + arch/powerpc/include/asm/ppc405gp.h | 108 ++ arch/powerpc/include/asm/ppc440.h | 190 ++ arch/powerpc/include/asm/ppc440ep_gr.h | 244 +++ arch/powerpc/include/asm/ppc440epx_grx.h | 464 +++++ arch/powerpc/include/asm/ppc440gp.h | 72 + arch/powerpc/include/asm/ppc440gx.h | 102 + arch/powerpc/include/asm/ppc440sp.h | 98 + arch/powerpc/include/asm/ppc440spe.h | 114 ++ arch/powerpc/include/asm/ppc460ex_gt.h | 222 +++ arch/powerpc/include/asm/ppc460sx.h | 44 + .../powerpc/include/asm/ppc4xx-emac.h | 8 +- arch/powerpc/include/asm/{gpio.h => ppc4xx-gpio.h} | 0 .../powerpc/include/asm/ppc4xx-i2c.h | 0 arch/powerpc/include/asm/ppc4xx-mal.h | 168 ++ arch/powerpc/include/asm/ppc4xx-sdram.h | 2 - arch/powerpc/include/asm/ppc4xx.h | 344 ++++ arch/powerpc/lib/board.c | 7 - arch/sparc/lib/board.c | 4 - board/amcc/acadia/memory.c | 2 +- board/amcc/acadia/pll.c | 30 +- board/amcc/bamboo/bamboo.c | 6 +- board/amcc/bamboo/bamboo.h | 11 - board/amcc/bamboo/flash.c | 6 +- board/amcc/bubinga/flash.c | 2 +- board/amcc/canyonlands/canyonlands.c | 4 +- board/amcc/common/flash.c | 2 +- board/amcc/ebony/flash.c | 2 +- board/amcc/ebony/init.S | 1 + board/amcc/katmai/init.S | 1 + board/amcc/katmai/katmai.c | 4 +- board/amcc/kilauea/kilauea.c | 4 +- board/amcc/luan/flash.c | 2 +- board/amcc/luan/init.S | 1 + board/amcc/luan/luan.c | 2 +- board/amcc/makalu/makalu.c | 6 +- board/amcc/ocotea/flash.c | 2 +- board/amcc/ocotea/init.S | 1 + board/amcc/ocotea/ocotea.c | 2 +- board/amcc/redwood/init.S | 1 + board/amcc/redwood/redwood.c | 2 +- board/amcc/sequoia/sdram.c | 2 +- board/amcc/sequoia/sequoia.c | 8 +- board/amcc/taihu/flash.c | 2 +- board/amcc/taihu/lcd.c | 2 +- board/amcc/taihu/taihu.c | 2 +- board/amcc/taishan/init.S | 1 + board/amcc/taishan/taishan.c | 2 +- board/amcc/walnut/flash.c | 2 +- board/amcc/yosemite/yosemite.c | 2 +- board/amcc/yucca/flash.c | 4 +- board/amcc/yucca/init.S | 1 + board/amcc/yucca/yucca.c | 2 +- board/amirix/ap1000/init.S | 2 +- board/amirix/ap1000/pci.c | 2 +- board/cray/L1/L1.c | 2 +- board/cray/L1/flash.c | 2 +- board/cray/L1/init.S | 2 +- board/csb272/csb272.c | 2 +- board/csb272/init.S | 2 +- board/csb472/csb472.c | 2 +- board/csb472/init.S | 2 +- board/dave/PPChameleonEVB/flash.c | 2 +- board/dave/common/pci.c | 2 +- board/eric/flash.c | 2 +- board/eric/init.S | 2 +- board/esd/adciop/flash.c | 2 +- board/esd/ar405/flash.c | 2 +- board/esd/ash405/flash.c | 2 +- board/esd/canbt/flash.c | 2 +- board/esd/cms700/flash.c | 2 +- board/esd/common/flash.c | 2 +- board/esd/common/pci.c | 2 +- board/esd/cpci2dp/flash.c | 2 +- board/esd/cpci405/flash.c | 2 +- board/esd/cpciiser4/flash.c | 2 +- board/esd/dasa_sim/flash.c | 2 +- board/esd/dp405/flash.c | 2 +- board/esd/du405/du405.c | 4 +- board/esd/du405/flash.c | 2 +- board/esd/du440/du440.c | 6 +- board/esd/hh405/flash.c | 2 +- board/esd/hub405/flash.c | 2 +- board/esd/ocrtc/flash.c | 2 +- board/esd/pci405/flash.c | 2 +- board/esd/pci405/pci405.c | 1 - board/esd/pci405/writeibm.S | 2 +- board/esd/plu405/flash.c | 2 +- board/esd/pmc405de/pmc405de.c | 2 +- board/esd/pmc440/pmc440.c | 12 +- board/esd/pmc440/sdram.c | 2 +- board/esd/tasreg/flash.c | 2 +- board/esd/voh405/flash.c | 2 +- board/esd/vom405/flash.c | 2 +- board/esd/wuh405/flash.c | 2 +- board/gdsys/dlvision/dlvision.c | 2 +- board/gdsys/gdppc440etx/gdppc440etx.c | 2 +- board/gdsys/intip/intip.c | 4 +- board/jse/flash.c | 2 +- board/jse/init.S | 2 +- board/jse/jse.c | 2 +- board/jse/sdram.c | 2 +- board/korat/korat.c | 8 +- board/lwmon5/lwmon5.c | 12 +- board/lwmon5/sdram.c | 2 +- board/ml2/init.S | 2 +- board/mosaixtech/icon/icon.c | 4 +- board/mosaixtech/icon/init.S | 1 + board/mpl/common/flash.c | 2 +- board/mpl/common/memtst.c | 2 +- board/mpl/mip405/init.S | 3 +- board/mpl/mip405/mip405.c | 3 +- board/mpl/pip405/init.S | 3 +- board/netstal/common/fixed_sdram.c | 2 +- board/netstal/hcu4/hcu4.c | 2 +- board/netstal/hcu5/hcu5.c | 26 +- board/netstal/hcu5/sdram.c | 2 +- board/netstal/mcu25/mcu25.c | 2 +- board/pcs440ep/pcs440ep.c | 2 +- board/prodrive/alpr/alpr.c | 2 +- board/prodrive/alpr/fpga.c | 2 +- board/prodrive/alpr/init.S | 1 + board/prodrive/p3p440/init.S | 1 + board/quad100hd/nand.c | 2 +- board/quad100hd/quad100hd.c | 2 +- board/sandburst/common/flash.c | 2 +- board/sandburst/common/ppc440gx_i2c.c | 4 +- board/sandburst/common/ppc440gx_i2c.h | 4 +- board/sandburst/karef/init.S | 1 + board/sandburst/metrobox/init.S | 1 + board/sc3/init.S | 2 +- board/sc3/sc3.c | 10 +- board/snmc/qs850/flash.c | 2 +- board/snmc/qs860t/flash.c | 2 +- board/t3corp/t3corp.c | 4 +- board/tb0229/flash.c | 2 +- board/w7o/flash.c | 2 +- board/w7o/init.S | 2 +- board/w7o/post1.S | 2 +- board/xes/xpedite1000/init.S | 1 + board/zeus/update.c | 2 +- board/zeus/zeus.c | 2 +- common/serial.c | 15 +- common/stdio.c | 8 - doc/README.ppc440 | 6 - drivers/i2c/ppc4xx_i2c.c | 4 +- drivers/mtd/nand/ndfc.c | 2 +- drivers/net/4xx_enet.c | 9 +- drivers/serial/serial_netarm.c | 5 - include/405_dimm.h | 4 - include/405_mal.h | 129 -- include/common.h | 11 +- include/configs/AP1000.h | 6 - include/configs/APC405.h | 6 + include/configs/AR405.h | 6 + include/configs/ASH405.h | 17 +- include/configs/ATUM8548.h | 1 - include/configs/CANBT.h | 6 + include/configs/CATcenter.h | 18 +- include/configs/CMS700.h | 19 +- include/configs/CPCI2DP.h | 7 +- include/configs/CPCI405.h | 6 + include/configs/CPCI4052.h | 6 + include/configs/CPCI405AB.h | 6 + include/configs/CPCI405DT.h | 6 + include/configs/CPCIISER4.h | 6 + include/configs/CRAYL1.h | 6 + include/configs/DP405.h | 19 +- include/configs/DU405.h | 37 +- include/configs/DU440.h | 9 +- include/configs/ERIC.h | 6 + include/configs/G2000.h | 17 +- include/configs/HH405.h | 17 +- include/configs/HUB405.h | 17 +- include/configs/JSE.h | 14 +- include/configs/KAREF.h | 7 +- include/configs/METROBOX.h | 7 +- include/configs/MIP405.h | 6 + include/configs/ML2.h | 10 - include/configs/MPC8308RDB.h | 1 - include/configs/MPC8315ERDB.h | 1 - include/configs/MPC8323ERDB.h | 1 - include/configs/MPC832XEMDS.h | 1 - include/configs/MPC8349EMDS.h | 1 - include/configs/MPC8349ITX.h | 1 - include/configs/MPC8360EMDS.h | 1 - include/configs/MPC8360ERDK.h | 1 - include/configs/MPC837XEMDS.h | 1 - include/configs/MPC837XERDB.h | 1 - include/configs/MPC8536DS.h | 1 - include/configs/MPC8540ADS.h | 1 - include/configs/MPC8540EVAL.h | 1 - include/configs/MPC8541CDS.h | 1 - include/configs/MPC8544DS.h | 1 - include/configs/MPC8548CDS.h | 1 - include/configs/MPC8555CDS.h | 1 - include/configs/MPC8568MDS.h | 1 - include/configs/MPC8569MDS.h | 1 - include/configs/MPC8572DS.h | 1 - include/configs/MPC8610HPCD.h | 1 - include/configs/MPC8641HPCN.h | 1 - include/configs/MVBLM7.h | 1 - include/configs/OCRTC.h | 6 + include/configs/ORSG.h | 6 + include/configs/P1_P2_RDB.h | 1 - include/configs/P2020DS.h | 1 - include/configs/PCI405.h | 6 + include/configs/PIP405.h | 6 + include/configs/PLU405.h | 17 +- include/configs/PM854.h | 1 - include/configs/PMC405.h | 6 + include/configs/PMC405DE.h | 7 +- include/configs/PMC440.h | 11 +- include/configs/PPChameleonEVB.h | 29 +- include/configs/SBC8540.h | 1 - include/configs/TQM834x.h | 1 - include/configs/TQM85xx.h | 1 - include/configs/VOH405.h | 17 +- include/configs/VOM405.h | 19 +- include/configs/W7OLMC.h | 6 + include/configs/W7OLMG.h | 6 + include/configs/WUH405.h | 17 +- include/configs/XPEDITE1000.h | 7 +- include/configs/acadia.h | 1 + include/configs/alpr.h | 8 +- include/configs/amcc-common.h | 6 +- include/configs/aria.h | 1 - include/configs/bamboo.h | 6 +- include/configs/bubinga.h | 12 +- include/configs/canyonlands.h | 4 +- include/configs/csb272.h | 6 + include/configs/csb472.h | 6 + include/configs/dlvision.h | 2 +- include/configs/eNET.h | 1 - include/configs/ebony.h | 3 +- include/configs/gdppc440etx.h | 7 +- include/configs/hcu5.h | 5 - include/configs/icon.h | 3 +- include/configs/intip.h | 4 +- include/configs/katmai.h | 3 +- include/configs/kilauea.h | 4 +- include/configs/kmeter1.h | 1 - include/configs/korat.h | 10 +- include/configs/luan.h | 4 +- include/configs/lwmon5.h | 10 +- include/configs/makalu.h | 4 +- include/configs/mcu25.h | 7 - include/configs/mecp5123.h | 1 - include/configs/mpc5121ads.h | 1 - include/configs/neo.h | 7 +- include/configs/netstal-common.h | 5 + include/configs/ocotea.h | 3 +- include/configs/p3p440.h | 7 +- include/configs/pcs440ep.h | 8 +- include/configs/quad100hd.h | 15 +- include/configs/redwood.h | 6 +- include/configs/sbc405.h | 6 + include/configs/sbc8349.h | 1 - include/configs/sbc8548.h | 1 - include/configs/sbc8560.h | 1 - include/configs/sbc8641d.h | 1 - include/configs/sc3.h | 13 +- include/configs/sequoia.h | 6 +- include/configs/socrates.h | 1 - include/configs/stxssa.h | 1 - include/configs/t3corp.h | 4 +- include/configs/taihu.h | 3 +- include/configs/taishan.h | 3 +- include/configs/vme8349.h | 1 - include/configs/walnut.h | 2 +- include/configs/yosemite.h | 4 +- include/configs/yucca.h | 4 +- include/configs/zeus.h | 22 +- include/ppc405.h | 832 --------- include/ppc440.h | 1958 -------------------- include/ppc4xx.h | 225 --- nand_spl/board/amcc/bamboo/sdram.c | 2 +- nand_spl/board/amcc/canyonlands/ddr2_fixed.c | 4 +- post/board/lwmon5/watchdog.c | 2 +- post/cpu/ppc4xx/denali_ecc.c | 2 +- post/cpu/ppc4xx/ether.c | 4 +- post/cpu/ppc4xx/fpu.c | 2 +- 317 files changed, 3689 insertions(+), 4578 deletions(-) create mode 100644 arch/powerpc/include/asm/ppc405.h create mode 100644 arch/powerpc/include/asm/ppc405cr.h create mode 100644 arch/powerpc/include/asm/ppc405ep.h create mode 100644 arch/powerpc/include/asm/ppc405ex.h create mode 100644 arch/powerpc/include/asm/ppc405ez.h create mode 100644 arch/powerpc/include/asm/ppc405gp.h create mode 100644 arch/powerpc/include/asm/ppc440.h create mode 100644 arch/powerpc/include/asm/ppc440ep_gr.h create mode 100644 arch/powerpc/include/asm/ppc440epx_grx.h create mode 100644 arch/powerpc/include/asm/ppc440gp.h create mode 100644 arch/powerpc/include/asm/ppc440gx.h create mode 100644 arch/powerpc/include/asm/ppc440sp.h create mode 100644 arch/powerpc/include/asm/ppc440spe.h create mode 100644 arch/powerpc/include/asm/ppc460ex_gt.h create mode 100644 arch/powerpc/include/asm/ppc460sx.h rename include/ppc4xx_enet.h => arch/powerpc/include/asm/ppc4xx-emac.h (98%) rename arch/powerpc/include/asm/{gpio.h => ppc4xx-gpio.h} (100%) rename include/4xx_i2c.h => arch/powerpc/include/asm/ppc4xx-i2c.h (100%) create mode 100644 arch/powerpc/include/asm/ppc4xx-mal.h create mode 100644 arch/powerpc/include/asm/ppc4xx.h delete mode 100644 include/405_dimm.h delete mode 100644 include/405_mal.h delete mode 100644 include/ppc405.h delete mode 100644 include/ppc440.h delete mode 100644 include/ppc4xx.h

2 3

[U-Boot] The board hangs while PCI-init
by sywang 23 Sep '10

23 Sep '10

Hello, everyone, I try to bring the u-boot up on the board with Cavium CN5010. When pci-init is executed on the board_init_r, the board will hang. Did you have such a question before? Any suggestions are welcome. Thanks! Shuyou

3 2

[U-Boot] [PATCH 1/2] [NEXT] orion5x: fix relocation-incompatible code
by Albert Aribaud 23 Sep '10

23 Sep '10

Signed-off-by: Albert Aribaud <albert.aribaud(a)free.fr> --- Device address window mapping code would not run from FLASH due to cutting access to BOOTCS. Fixed by reordering code. Timer initialization would write globals, thus would not run correctly from FLASH. Fixed by moving the writes to a later phase in RAM. arch/arm/cpu/arm926ejs/orion5x/cpu.c | 80 +++++++++++++++++++------------ arch/arm/cpu/arm926ejs/orion5x/timer.c | 8 ++- arch/arm/include/asm/arch-orion5x/cpu.h | 1 + 3 files changed, 56 insertions(+), 33 deletions(-) diff --git a/arch/arm/cpu/arm926ejs/orion5x/cpu.c b/arch/arm/cpu/arm926ejs/orion5x/cpu.c index 260f88b..5cffa86 100644 --- a/arch/arm/cpu/arm926ejs/orion5x/cpu.c +++ b/arch/arm/cpu/arm926ejs/orion5x/cpu.c @@ -77,6 +77,17 @@ unsigned int orion5x_winctrl_calcsize(unsigned int sizeval) * * If remap function not used, remap_lo must be set as base * + * NOTES: + * + * 1) in order to avoid windows with inconsistent control and base values + * (which could prevent access to BOOTCS and hence execution from FLASH) + * always disable window before writing the base value then reenable it + * by writing the control value. + * + * 2) in order to avoid losing access to BOOTCS when disabling window 7, + * first configure window 6 for BOOTCS, then configure window 7 for BOOTCS, + * then configure windows 0 to 6 for their own target. + * * Reference Documentation: * Mbus-L to Mbus Bridge Registers Configuration. * (Sec 25.1 and 25.3 of Datasheet) @@ -86,57 +97,64 @@ int orion5x_config_adr_windows(void) struct orion5x_win_registers *winregs = (struct orion5x_win_registers *)ORION5X_CPU_WIN_BASE; - /* Window 0: PCIE MEM address space */ +/* Disable window 6, configure it for FLASH, enable it. */ + writel(0, &winregs[6].ctrl); + writel(ORION5X_ADR_BOOTROM, &winregs[6].base); + writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_SZ_BOOTROM, + ORION5X_TARGET_DEVICE, ORION5X_ATTR_BOOTROM, + ORION5X_WIN_ENABLE), &winregs[6].ctrl); +/* Disable window 7, configure it for FLASH, enable it. */ + writel(0, &winregs[7].ctrl); + writel(ORION5X_ADR_BOOTROM, &winregs[7].base); + writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_SZ_BOOTROM, + ORION5X_TARGET_DEVICE, ORION5X_ATTR_BOOTROM, + ORION5X_WIN_ENABLE), &winregs[7].ctrl); +/* Disable window 0, configure it for its intended target, enable it. */ + writel(0, &winregs[0].ctrl); + writel(ORION5X_ADR_PCIE_MEM, &winregs[0].base); + writel(ORION5X_ADR_PCIE_MEM_REMAP_LO, &winregs[0].remap_lo); + writel(ORION5X_ADR_PCIE_MEM_REMAP_HI, &winregs[0].remap_hi); writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_SZ_PCIE_MEM, ORION5X_TARGET_PCIE, ORION5X_ATTR_PCIE_MEM, ORION5X_WIN_ENABLE), &winregs[0].ctrl); - writel(ORION5X_ADR_PCIE_MEM, &winregs[0].base); - writel(ORION5X_ADR_PCIE_MEM_REMAP_LO, &winregs[0].remap_lo); - writel(ORION5X_ADR_PCIE_MEM_REMAP_HI, &winregs[0].remap_hi); - - /* Window 1: PCIE IO address space */ - writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_SZ_PCIE_IO, - ORION5X_TARGET_PCIE, ORION5X_ATTR_PCIE_IO, - ORION5X_WIN_ENABLE), &winregs[1].ctrl); +/* Disable window 1, configure it for its intended target, enable it. */ + writel(0, &winregs[1].ctrl); writel(ORION5X_ADR_PCIE_IO, &winregs[1].base); writel(ORION5X_ADR_PCIE_IO_REMAP_LO, &winregs[1].remap_lo); writel(ORION5X_ADR_PCIE_IO_REMAP_HI, &winregs[1].remap_hi); - - /* Window 2: PCI MEM address space */ + writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_SZ_PCIE_IO, + ORION5X_TARGET_PCIE, ORION5X_ATTR_PCIE_IO, + ORION5X_WIN_ENABLE), &winregs[1].ctrl); +/* Disable window 2, configure it for its intended target, enable it. */ + writel(0, &winregs[2].ctrl); + writel(ORION5X_ADR_PCI_MEM, &winregs[2].base); writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_SZ_PCI_MEM, ORION5X_TARGET_PCI, ORION5X_ATTR_PCI_MEM, ORION5X_WIN_ENABLE), &winregs[2].ctrl); - writel(ORION5X_ADR_PCI_MEM, &winregs[2].base); - - /* Window 3: PCI IO address space */ +/* Disable window 3, configure it for its intended target, enable it. */ + writel(0, &winregs[3].ctrl); + writel(ORION5X_ADR_PCI_IO, &winregs[3].base); writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_SZ_PCI_IO, ORION5X_TARGET_PCI, ORION5X_ATTR_PCI_IO, ORION5X_WIN_ENABLE), &winregs[3].ctrl); - writel(ORION5X_ADR_PCI_IO, &winregs[3].base); - - /* Window 4: DEV_CS0 address space */ +/* Disable window 4, configure it for its intended target, enable it. */ + writel(0, &winregs[4].ctrl); + writel(ORION5X_ADR_DEV_CS0, &winregs[4].base); writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_SZ_DEV_CS0, ORION5X_TARGET_DEVICE, ORION5X_ATTR_DEV_CS0, ORION5X_WIN_ENABLE), &winregs[4].ctrl); - writel(ORION5X_ADR_DEV_CS0, &winregs[4].base); - - /* Window 5: DEV_CS1 address space */ +/* Disable window 5, configure it for its intended target, enable it. */ + writel(0, &winregs[5].ctrl); + writel(ORION5X_ADR_DEV_CS1, &winregs[5].base); writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_SZ_DEV_CS1, ORION5X_TARGET_DEVICE, ORION5X_ATTR_DEV_CS1, ORION5X_WIN_ENABLE), &winregs[5].ctrl); - writel(ORION5X_ADR_DEV_CS1, &winregs[5].base); - - /* Window 6: DEV_CS2 address space */ +/* Disable window 6, configure it for its intended target, enable it. */ + writel(0, &winregs[6].ctrl); + writel(ORION5X_ADR_DEV_CS2, &winregs[6].base); writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_SZ_DEV_CS2, ORION5X_TARGET_DEVICE, ORION5X_ATTR_DEV_CS2, ORION5X_WIN_ENABLE), &winregs[6].ctrl); - writel(ORION5X_ADR_DEV_CS2, &winregs[6].base); - - /* Window 7: BOOT Memory address space */ - writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_SZ_BOOTROM, - ORION5X_TARGET_DEVICE, ORION5X_ATTR_BOOTROM, - ORION5X_WIN_ENABLE), &winregs[7].ctrl); - writel(ORION5X_ADR_BOOTROM, &winregs[7].base); return 0; } @@ -265,6 +283,8 @@ int arch_misc_init(void) writel(ORION5X_MPP16_23, ORION5X_MPP_BASE+0x50); writel(ORION5X_GPIO_OUT_ENABLE, ORION5X_GPIO_BASE+0x04); + /* initialize timer */ + timer_init_r(); return 0; } #endif /* CONFIG_ARCH_MISC_INIT */ diff --git a/arch/arm/cpu/arm926ejs/orion5x/timer.c b/arch/arm/cpu/arm926ejs/orion5x/timer.c index 115448f..d976f5a 100644 --- a/arch/arm/cpu/arm926ejs/orion5x/timer.c +++ b/arch/arm/cpu/arm926ejs/orion5x/timer.c @@ -173,9 +173,11 @@ int timer_init(void) cntmrctrl |= CTCR_ARM_TIMER_EN(UBOOT_CNTR); cntmrctrl |= CTCR_ARM_TIMER_AUTO_EN(UBOOT_CNTR); writel(cntmrctrl, CNTMR_CTRL_REG); + return 0; +} +void timer_init_r(void) +{ /* init the timestamp and lastdec value */ reset_timer_masked(); - - return 0; -} +} \ No newline at end of file diff --git a/arch/arm/include/asm/arch-orion5x/cpu.h b/arch/arm/include/asm/arch-orion5x/cpu.h index 6ce02a9..c84efaf 100644 --- a/arch/arm/include/asm/arch-orion5x/cpu.h +++ b/arch/arm/include/asm/arch-orion5x/cpu.h @@ -255,5 +255,6 @@ void reset_cpu(unsigned long ignored); u32 orion5x_device_id(void); u32 orion5x_device_rev(void); unsigned int orion5x_winctrl_calcsize(unsigned int sizeval); +void timer_init_r(void); #endif /* __ASSEMBLY__ */ #endif /* _ORION5X_CPU_H */ -- 1.7.0.4

4 6

[U-Boot] cuImage and multi image?
by Shawn Jin 23 Sep '10

23 Sep '10

Hi, I have a cuImage kernel in order to support legacy u-boot and a ramdisk image. Kernel boots fine if these two images are separate and "bootm $kernel $ramdisk" is used. But I can not make it to work using a single multi image that contains the kernel and ramdisk images. Is it even technically possible to boot a multi-image with cuboot wrapper? On the cuImage kernel I have load address set to 0x400000 and the entry address set to 0x400554 due to the cuboot wrapper. But to make a multi image, both the load and the entry addresses should be set to zero. And u-boot (1.1.2) bootm takes the entry address of the multi image (i.e. 0x0) as the kernel entry address. 0x0 is certainly not the entry address for a cuImage kernel. Is there a possible workaround other than using two separate images? Thanks, -Shawn.

4 11

[U-Boot] Ramdisk - allocation error
by Ronny D 23 Sep '10

23 Sep '10

Hi, I am using ppc440 based customised board. While running the u-boot linux kernel uncompressed successfully but ramdisk end-up with following error: ERROR: Failed to allocate 0x800000 bytes below 0xffffffff. ramdisk - allocation error Regards, Ronny D.

2 2