July 2010 - U-Boot

[U-Boot] [PATCH] cmd_ide: Convert to [read,write][b,w]
by Marek Vasut 21 Jul '10

21 Jul '10

Signed-off-by: Marek Vasut <marek.vasut(a)gmail.com> --- common/cmd_ide.c | 22 +++++++++++++--------- 1 files changed, 13 insertions(+), 9 deletions(-) diff --git a/common/cmd_ide.c b/common/cmd_ide.c index 093ca9f..9c4b250 100644 --- a/common/cmd_ide.c +++ b/common/cmd_ide.c @@ -161,8 +161,8 @@ static uchar ide_wait (int dev, ulong t); #define IDE_SPIN_UP_TIME_OUT 5000 /* 5 sec spin-up timeout */ -static void input_data(int dev, ulong *sect_buf, int words); -static void output_data(int dev, ulong *sect_buf, int words); +static void input_data(int dev, uint16_t *sect_buf, int words); +static void output_data(int dev, uint16_t *sect_buf, int words); static void ident_cpy (unsigned char *dest, unsigned char *src, unsigned int len); #ifndef CONFIG_SYS_ATA_PORT_ADDR @@ -526,7 +526,7 @@ __ide_outb(int dev, int port, unsigned char val) { debug ("ide_outb (dev= %d, port= 0x%x, val= 0x%02x) : @ 0x%08lx\n", dev, port, val, (ATA_CURR_BASE(dev)+CONFIG_SYS_ATA_PORT_ADDR(port))); - outb(val, (ATA_CURR_BASE(dev)+CONFIG_SYS_ATA_PORT_ADDR(port))); + writeb(val, (ATA_CURR_BASE(dev)+CONFIG_SYS_ATA_PORT_ADDR(port))); } void ide_outb (int dev, int port, unsigned char val) __attribute__((weak, alias("__ide_outb"))); @@ -535,7 +535,7 @@ unsigned char inline __ide_inb(int dev, int port) { uchar val; - val = inb((ATA_CURR_BASE(dev)+CONFIG_SYS_ATA_PORT_ADDR(port))); + val = readb((ATA_CURR_BASE(dev)+CONFIG_SYS_ATA_PORT_ADDR(port))); debug ("ide_inb (dev= %d, port= 0x%x) : @ 0x%08lx -> 0x%02x\n", dev, port, (ATA_CURR_BASE(dev)+CONFIG_SYS_ATA_PORT_ADDR(port)), val); return val; @@ -937,9 +937,11 @@ output_data(int dev, ulong *sect_buf, int words) } #else /* ! __PPC__ */ static void -output_data(int dev, ulong *sect_buf, int words) +output_data(int dev, uint16_t *sect_buf, int words) { - outsw(ATA_CURR_BASE(dev)+ATA_DATA_REG, sect_buf, words<<1); + int i; + for (i = 0; i < (words << 1); i++) + writew(sect_buf[i], ATA_CURR_BASE(dev)+ATA_DATA_REG); } #endif /* __PPC__ */ @@ -995,9 +997,11 @@ input_data(int dev, ulong *sect_buf, int words) } #else /* ! __PPC__ */ static void -input_data(int dev, ulong *sect_buf, int words) +input_data(int dev, uint16_t *sect_buf, int words) { - insw(ATA_CURR_BASE(dev)+ATA_DATA_REG, sect_buf, words << 1); + int i; + for (i = 0; i < (words << 1); i++) + sect_buf[i] = readw(ATA_CURR_BASE(dev)+ATA_DATA_REG); } #endif /* __PPC__ */ @@ -1115,7 +1119,7 @@ static void ide_ident (block_dev_desc_t *dev_desc) return; #endif - input_swap_data (device, iobuf, ATA_SECTORWORDS); + input_swap_data (device, (uint16_t *)iobuf, ATA_SECTORWORDS); ident_cpy ((unsigned char*)dev_desc->revision, iop->fw_rev, sizeof(dev_desc->revision)); ident_cpy ((unsigned char*)dev_desc->vendor, iop->model, sizeof(dev_desc->vendor)); -- 1.7.1

3 6

Re: [U-Boot] mtd partition &kernel
by Ben Gardiner 21 Jul '10

21 Jul '10

Please keep all correspondence on the list. On Wed, Jul 21, 2010 at 1:52 AM, Fundu <fundu_1999(a)yahoo.com> wrote: > is there a way i could put this information in the kernel for testing ? I don't understand the question. > in u-boot for my board is saw board/mini2440/mini2440.c > > i saw > > unsigned int dynpart_size[] = { > CFG_UBOOT_SIZE, 0x20000, 0x500000, 0xffffffff, 0 }; > char *dynpart_names[] = { > "u-boot", "u-boot_env", "kernel", "rootfs", NULL }; > > If i change this would the propogation be taken care of. The dynpart feature is not in mainline u-boot. There is currently a port of the dynpart feature submitted for inclusion [1]. Where did your source code come from? Perhaps the people that provided the source code can help? As far as I understand dynpart you will need to take whatever space you need for the new partition from the rootfs partition and add the new partition definition to the mini2440.c file by appending an entry to both the dynpart_size and dynpart_names arrays. Compile and flash the new u-boot and with this u-boot execute the 'dynpart' command followed by saveenv. Then re-flash the rootfs and your new partition. Best Regards, Ben Gardiner [1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/80843 --- Nanometrics Inc. http://www.nanometrics.ca

1 0

[U-Boot] question about example/standalone/mips.lds
by "Xiangfu Liu(刘向富)" 21 Jul '10

21 Jul '10

Hi all in this file :" example/standalone/mips.lds " it indicate compile example as BIG mips. but my device is LITTLE mips. so I simply comment this line[1]. I found other boards compile fine. without any error. do I must compile this example? is that ok to comment this line? or what I need to to ? thanks. [1] OUTPUT_FORMAT("elf32-tradbigmips", "elf32-tradbigmips", "elf32-tradbigmips") -- Best Regards Xiangfu Liu http://www.openmobilefree.net

4 6

[U-Boot] question about add new board to MAKEALL
by "Xiangfu Liu(刘向富)" 21 Jul '10

21 Jul '10

Hi all. I am try to add new board to "MAKEALL" here[1] is the patch. but "MAKEALL" doesn't compile the new board qi_lb60. here[2] is the tail of compile log this board is base on next branch commit: 953b7e629198fe2eb0adf272fb9140f2a4a51826 I am sure that when I use mipsel-openwrt-linux-, the qi_lb60 compile fine. did I need add the "mipsel-openwrt-linux-" to MAKEALL?? give me some advice? thanks. [1]------------------ diff --git a/MAKEALL b/MAKEALL index d6d5f5b..3b6953b 100755 --- a/MAKEALL +++ b/MAKEALL @@ -786,7 +786,8 @@ LIST_mips=" \ ## MIPS Systems (little endian) ######################################################################### -LIST_mips4kc_el="" +LIST_mips4kc_el=" \ + qi_lb60" LIST_mips5kc_el="" [2] xiangfu@openmobilefree:~/u-boot/u-boot.git$ tail ../build.all.log text data bss dec hex filename 191056 14820 22604 228480 37c80 ../u-boot-build/u-boot Configuring for ppmc7xx board... text data bss dec hex filename 144420 9768 22464 176652 2b20c ../u-boot-build/u-boot --------------------- SUMMARY ---------------------------- Boards compiled: 354 Boards with warnings or errors: 19 ( MVBC_P lwmon TQM823L_LCD BMW caddy2 MPC8536DS MPC8536DS_NAND MPC8536DS_SDCARD MPC8536DS_SPIFLASH MPC8544DS P2020DS P2020DS_36BIT PM854 AP1000 ML2 sc3 EVB64260 P3G4 ZUMA ) ---------------------------------------------------------- -- Best Regards Xiangfu Liu http://www.openmobilefree.net

3 10

[U-Boot] [PATCH] powerpc/85xx: Rework MPC8536 SERDES is_serdes_configured support
by Kumar Gala 21 Jul '10

21 Jul '10

Move serdes init until after we are in ram so we can keep track of a global static protocal map for the particular serdes config we are in. This makes is_serdes_configured() much simplier and not constantly reading registers to determine if a given device is enabled based on the protocol. Signed-off-by: Kumar Gala <galak(a)kernel.crashing.org> --- arch/powerpc/cpu/mpc85xx/cpu_init.c | 12 ++--- arch/powerpc/cpu/mpc85xx/mpc8536_serdes.c | 66 ++++++++++++++-------------- arch/powerpc/include/asm/fsl_serdes.h | 1 + include/configs/MPC8536DS.h | 1 + 4 files changed, 40 insertions(+), 40 deletions(-) diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c index d491e2a..5d5b4c2 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c @@ -39,10 +39,6 @@ DECLARE_GLOBAL_DATA_PTR; -#ifdef CONFIG_MPC8536 -extern void fsl_serdes_init(void); -#endif - #ifdef CONFIG_QE extern qe_iop_conf_t qe_iop_conf_tab[]; extern void qe_config_iopin(u8 port, u8 pin, int dir, @@ -185,9 +181,6 @@ void cpu_init_f (void) /* Config QE ioports */ config_qe_ioports(); #endif -#if defined(CONFIG_MPC8536) - fsl_serdes_init(); -#endif #if defined(CONFIG_FSL_DMA) dma_init(); #endif @@ -332,6 +325,11 @@ int cpu_init_r(void) qe_reset(); #endif +#if defined(CONFIG_SYS_HAS_SERDES) + /* needs to be in ram since code uses global static vars */ + fsl_serdes_init(); +#endif + #if defined(CONFIG_MP) setup_mp(); #endif diff --git a/arch/powerpc/cpu/mpc85xx/mpc8536_serdes.c b/arch/powerpc/cpu/mpc85xx/mpc8536_serdes.c index 7e72f5f..6dadeb8 100644 --- a/arch/powerpc/cpu/mpc85xx/mpc8536_serdes.c +++ b/arch/powerpc/cpu/mpc85xx/mpc8536_serdes.c @@ -66,10 +66,11 @@ #define FSL_SRDSCR3_LANEE_SGMII 0x00000000 #define FSL_SRDSCR3_LANEE_SATA 0x00150005 - #define SRDS1_MAX_LANES 8 #define SRDS2_MAX_LANES 2 +static u32 serdes1_prtcl_map, serdes2_prtcl_map; + static u8 serdes1_cfg_tbl[][SRDS1_MAX_LANES] = { [0x2] = {PCIE1, PCIE1, PCIE1, PCIE1, NONE, NONE, NONE, NONE}, [0x3] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1}, @@ -86,39 +87,12 @@ static u8 serdes2_cfg_tbl[][SRDS2_MAX_LANES] = { int is_serdes_configured(enum srds_prtcl device) { - int i; - ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - u32 pordevsr = in_be32(&gur->pordevsr); - u32 srds1_cfg = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> - MPC85xx_PORDEVSR_IO_SEL_SHIFT; + int ret = (1 << device) & serdes1_prtcl_map; - u32 srds2_cfg = (pordevsr & MPC85xx_PORDEVSR_SRDS2_IO_SEL) >> - GUTS_PORDEVSR_SERDES2_IO_SEL_SHIFT; - - debug("%s: dev = %d\n", __FUNCTION__, device); - debug("PORDEVSR[IO_SEL] = %x\n", srds1_cfg); - debug("PORDEVSR[SRDS2_IO_SEL] = %x\n", srds2_cfg); - - if (srds1_cfg > ARRAY_SIZE(serdes1_cfg_tbl)) { - printf("Invalid PORDEVSR[IO_SEL] = %d\n", srds1_cfg); - return 0; - } - - if (srds2_cfg > ARRAY_SIZE(serdes2_cfg_tbl)) { - printf("Invalid PORDEVSR[SRDS2_IO_SEL] = %d\n", srds2_cfg); - return 0; - } - - for (i = 0; i < SRDS1_MAX_LANES; i++) { - if (serdes1_cfg_tbl[srds1_cfg][i] == device) - return 1; - } - for (i = 0; i < SRDS2_MAX_LANES; i++) { - if (serdes2_cfg_tbl[srds2_cfg][i] == device) - return 1; - } + if (ret) + return ret; - return 0; + return (1 << device) & serdes2_prtcl_map; } void fsl_serdes_init(void) @@ -126,13 +100,20 @@ void fsl_serdes_init(void) void *guts = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); void *sd = (void *)CONFIG_SYS_MPC85xx_SERDES2_ADDR; u32 pordevsr = in_be32(guts + GUTS_PORDEVSR_OFFS); - u32 srds2_io_sel; + u32 srds1_io_sel, srds2_io_sel; u32 tmp; + int lane; + + srds1_io_sel = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> + MPC85xx_PORDEVSR_IO_SEL_SHIFT; /* parse the SRDS2_IO_SEL of PORDEVSR */ srds2_io_sel = (pordevsr & GUTS_PORDEVSR_SERDES2_IO_SEL) >> GUTS_PORDEVSR_SERDES2_IO_SEL_SHIFT; + debug("PORDEVSR[SRDS1_IO_SEL] = %x\n", srds1_io_sel); + debug("PORDEVSR[SRDS2_IO_SEL] = %x\n", srds2_io_sel); + switch (srds2_io_sel) { case 1: /* Lane A - SATA1, Lane E - SATA2 */ /* CR 0 */ @@ -246,4 +227,23 @@ void fsl_serdes_init(void) default: break; } + + if (srds1_io_sel > ARRAY_SIZE(serdes1_cfg_tbl)) { + printf("Invalid PORDEVSR[SRDS1_IO_SEL] = %d\n", srds1_io_sel); + return; + } + for (lane = 0; lane < SRDS1_MAX_LANES; lane++) { + enum srds_prtcl lane_prtcl = serdes1_cfg_tbl[srds1_io_sel][lane]; + serdes1_prtcl_map |= (1 << lane_prtcl); + } + + if (srds2_io_sel > ARRAY_SIZE(serdes2_cfg_tbl)) { + printf("Invalid PORDEVSR[SRDS2_IO_SEL] = %d\n", srds2_io_sel); + return; + } + + for (lane = 0; lane < SRDS2_MAX_LANES; lane++) { + enum srds_prtcl lane_prtcl = serdes2_cfg_tbl[srds2_io_sel][lane]; + serdes2_prtcl_map |= (1 << lane_prtcl); + } } diff --git a/arch/powerpc/include/asm/fsl_serdes.h b/arch/powerpc/include/asm/fsl_serdes.h index d4839f4..c7877b9 100644 --- a/arch/powerpc/include/asm/fsl_serdes.h +++ b/arch/powerpc/include/asm/fsl_serdes.h @@ -44,5 +44,6 @@ enum srds_prtcl { }; int is_serdes_configured(enum srds_prtcl device); +void fsl_serdes_init(void); #endif /* __FSL_SERDES_H */ diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h index a014ad0..953a463 100644 --- a/include/configs/MPC8536DS.h +++ b/include/configs/MPC8536DS.h @@ -65,6 +65,7 @@ #define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ #define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */ #define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ +#define CONFIG_SYS_HAS_SERDES /* has SERDES */ #define CONFIG_FSL_LAW 1 /* Use common FSL init code */ #define CONFIG_E1000 1 /* Defind e1000 pci Ethernet card*/ -- 1.6.0.6

1 3

[U-Boot] [PATCH 1/4] powerpc/85xx: Move PCI/PCIe address defines into common immap_85xx.h
by Kumar Gala 21 Jul '10

21 Jul '10

Remove dupliacted setting of PCI/PCIe address and offsets in board config.h. Signed-off-by: Kumar Gala <galak(a)kernel.crashing.org> --- arch/powerpc/include/asm/immap_85xx.h | 20 ++++++++++++++++++++ include/configs/ATUM8548.h | 3 --- include/configs/MPC8536DS.h | 5 ----- include/configs/MPC8544DS.h | 5 ----- include/configs/MPC8548CDS.h | 4 ---- include/configs/MPC8568MDS.h | 3 --- include/configs/MPC8569MDS.h | 3 --- include/configs/MPC8572DS.h | 4 ---- include/configs/P1022DS.h | 4 ---- include/configs/P1_P2_RDB.h | 3 --- include/configs/P2020DS.h | 4 ---- include/configs/TQM85xx.h | 4 ---- include/configs/XPEDITE5200.h | 1 - include/configs/XPEDITE5370.h | 2 -- include/configs/sbc8548.h | 4 ---- 15 files changed, 20 insertions(+), 49 deletions(-) diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h index a37bc80..ac9b7ab 100644 --- a/arch/powerpc/include/asm/immap_85xx.h +++ b/arch/powerpc/include/asm/immap_85xx.h @@ -2092,8 +2092,17 @@ typedef struct ccsr_sec { #define CONFIG_SYS_MPC85xx_LBC_OFFSET 0x5000 #define CONFIG_SYS_MPC85xx_DDR2_OFFSET 0x6000 #define CONFIG_SYS_MPC85xx_ESPI_OFFSET 0x7000 +#define CONFIG_SYS_MPC85xx_PCI1_OFFSET 0x8000 #define CONFIG_SYS_MPC85xx_PCIX_OFFSET 0x8000 +#define CONFIG_SYS_MPC85xx_PCI2_OFFSET 0x9000 #define CONFIG_SYS_MPC85xx_PCIX2_OFFSET 0x9000 +#define CONFIG_SYS_MPC85xx_PCIE1_OFFSET 0xa000 +#define CONFIG_SYS_MPC85xx_PCIE2_OFFSET 0x9000 +#if defined(CONFIG_MPC8572) || defined(CONFIG_P2020) +#define CONFIG_SYS_MPC85xx_PCIE3_OFFSET 0x8000 +#else +#define CONFIG_SYS_MPC85xx_PCIE3_OFFSET 0xb000 +#endif #define CONFIG_SYS_MPC85xx_GPIO_OFFSET 0xF000 #define CONFIG_SYS_MPC85xx_SATA1_OFFSET 0x18000 #define CONFIG_SYS_MPC85xx_SATA2_OFFSET 0x19000 @@ -2176,6 +2185,17 @@ typedef struct ccsr_sec { #define CONFIG_SYS_FSL_SEC_ADDR \ (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_SEC_OFFSET) +#define CONFIG_SYS_PCI1_ADDR \ + (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_PCI1_OFFSET) +#define CONFIG_SYS_PCI2_ADDR \ + (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_PCI2_OFFSET) +#define CONFIG_SYS_PCIE1_ADDR \ + (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_PCIE1_OFFSET) +#define CONFIG_SYS_PCIE2_ADDR \ + (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_PCIE2_OFFSET) +#define CONFIG_SYS_PCIE3_ADDR \ + (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_PCIE3_OFFSET) + #define TSEC_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET) #define MDIO_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MDIO1_OFFSET) diff --git a/include/configs/ATUM8548.h b/include/configs/ATUM8548.h index 49a86fd..c133033 100644 --- a/include/configs/ATUM8548.h +++ b/include/configs/ATUM8548.h @@ -91,9 +91,6 @@ #define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */ #define PCI_SPEED 33333000 /* CPLD currenlty does not have PCI setup info */ -#define CONFIG_SYS_PCI1_ADDR (CONFIG_SYS_CCSRBAR+0x8000) -#define CONFIG_SYS_PCI2_ADDR (CONFIG_SYS_CCSRBAR+0x9000) -#define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_CCSRBAR+0xa000) /* DDR Setup */ #define CONFIG_FSL_DDR2 diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h index 9c46d3e..f03d707 100644 --- a/include/configs/MPC8536DS.h +++ b/include/configs/MPC8536DS.h @@ -129,11 +129,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); #define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */ #endif -#define CONFIG_SYS_PCI1_ADDR (CONFIG_SYS_CCSRBAR + 0x8000) -#define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_CCSRBAR + 0xa000) -#define CONFIG_SYS_PCIE2_ADDR (CONFIG_SYS_CCSRBAR + 0x9000) -#define CONFIG_SYS_PCIE3_ADDR (CONFIG_SYS_CCSRBAR + 0xb000) - /* DDR Setup */ #define CONFIG_VERY_BIG_RAM #define CONFIG_FSL_DDR2 diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h index faba353..96fd024 100644 --- a/include/configs/MPC8544DS.h +++ b/include/configs/MPC8544DS.h @@ -79,11 +79,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of CCSRBAR */ #define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */ -#define CONFIG_SYS_PCI1_ADDR (CONFIG_SYS_CCSRBAR+0x8000) -#define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_CCSRBAR+0xa000) -#define CONFIG_SYS_PCIE2_ADDR (CONFIG_SYS_CCSRBAR+0x9000) -#define CONFIG_SYS_PCIE3_ADDR (CONFIG_SYS_CCSRBAR+0xb000) - /* DDR Setup */ #define CONFIG_FSL_DDR2 #undef CONFIG_FSL_DDR_INTERACTIVE diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h index fdd3597..23594a7 100644 --- a/include/configs/MPC8548CDS.h +++ b/include/configs/MPC8548CDS.h @@ -80,10 +80,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of CCSRBAR */ #define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */ -#define CONFIG_SYS_PCI1_ADDR (CONFIG_SYS_CCSRBAR+0x8000) -#define CONFIG_SYS_PCI2_ADDR (CONFIG_SYS_CCSRBAR+0x9000) -#define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_CCSRBAR+0xa000) - /* DDR Setup */ #define CONFIG_FSL_DDR2 #undef CONFIG_FSL_DDR_INTERACTIVE diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h index 0cc2d47..bc6c5c7 100644 --- a/include/configs/MPC8568MDS.h +++ b/include/configs/MPC8568MDS.h @@ -75,9 +75,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of CCSRBAR */ #define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */ -#define CONFIG_SYS_PCI1_ADDR (CONFIG_SYS_CCSRBAR+0x8000) -#define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_CCSRBAR+0xa000) - /* DDR Setup */ #define CONFIG_FSL_DDR2 #undef CONFIG_FSL_DDR_INTERACTIVE diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h index bb7bb47..92c2b49 100644 --- a/include/configs/MPC8569MDS.h +++ b/include/configs/MPC8569MDS.h @@ -103,9 +103,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */ #endif -#define CONFIG_SYS_PCI1_ADDR (CONFIG_SYS_CCSRBAR+0x8000) -#define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_CCSRBAR+0xa000) - /* DDR Setup */ #define CONFIG_FSL_DDR3 #undef CONFIG_FSL_DDR_INTERACTIVE diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h index 6038de1..8dfc3cf 100644 --- a/include/configs/MPC8572DS.h +++ b/include/configs/MPC8572DS.h @@ -93,10 +93,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); #endif #define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */ -#define CONFIG_SYS_PCIE3_ADDR (CONFIG_SYS_CCSRBAR+0x8000) -#define CONFIG_SYS_PCIE2_ADDR (CONFIG_SYS_CCSRBAR+0x9000) -#define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_CCSRBAR+0xa000) - /* DDR Setup */ #define CONFIG_VERY_BIG_RAM #define CONFIG_FSL_DDR2 diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h index e444179..3ed188f 100644 --- a/include/configs/P1022DS.h +++ b/include/configs/P1022DS.h @@ -60,10 +60,6 @@ #define CONFIG_SYS_CCSRBAR_PHYS 0xfffe00000ull #define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR -#define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_CCSRBAR + 0x9000) /* pci0 */ -#define CONFIG_SYS_PCIE2_ADDR (CONFIG_SYS_CCSRBAR + 0xa000) /* pci1 */ -#define CONFIG_SYS_PCIE3_ADDR (CONFIG_SYS_CCSRBAR + 0xb000) /* pci2 */ - /* DDR Setup */ #define CONFIG_DDR_SPD #define CONFIG_VERY_BIG_RAM diff --git a/include/configs/P1_P2_RDB.h b/include/configs/P1_P2_RDB.h index 3cebbab..fca3cdd 100644 --- a/include/configs/P1_P2_RDB.h +++ b/include/configs/P1_P2_RDB.h @@ -129,9 +129,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */ #endif -#define CONFIG_SYS_PCIE2_ADDR (CONFIG_SYS_CCSRBAR+0x9000) -#define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_CCSRBAR+0xa000) - /* DDR Setup */ #define CONFIG_FSL_DDR2 #undef CONFIG_FSL_DDR_INTERACTIVE diff --git a/include/configs/P2020DS.h b/include/configs/P2020DS.h index 569da4f..bf2acbf 100644 --- a/include/configs/P2020DS.h +++ b/include/configs/P2020DS.h @@ -90,10 +90,6 @@ #endif #define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */ -#define CONFIG_SYS_PCIE3_ADDR (CONFIG_SYS_CCSRBAR+0x8000) -#define CONFIG_SYS_PCIE2_ADDR (CONFIG_SYS_CCSRBAR+0x9000) -#define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_CCSRBAR+0xa000) - /* DDR Setup */ #define CONFIG_VERY_BIG_RAM #define CONFIG_FSL_DDR3 1 diff --git a/include/configs/TQM85xx.h b/include/configs/TQM85xx.h index 90abe14..d8f2602 100644 --- a/include/configs/TQM85xx.h +++ b/include/configs/TQM85xx.h @@ -137,10 +137,6 @@ #define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of CCSRBAR */ #define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */ -#define CONFIG_SYS_PCI1_ADDR (CONFIG_SYS_CCSRBAR + 0x8000) -#define CONFIG_SYS_PCI2_ADDR (CONFIG_SYS_CCSRBAR + 0x9000) -#define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_CCSRBAR + 0xa000) - /* * DDR Setup */ diff --git a/include/configs/XPEDITE5200.h b/include/configs/XPEDITE5200.h index df5ef78..83aeffd 100644 --- a/include/configs/XPEDITE5200.h +++ b/include/configs/XPEDITE5200.h @@ -81,7 +81,6 @@ #define CONFIG_SYS_CCSRBAR 0xef000000 /* relocated CCSRBAR */ #define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of CCSRBAR */ #define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */ -#define CONFIG_SYS_PCI1_ADDR (CONFIG_SYS_CCSRBAR + 0x8000) /* * Diagnostics diff --git a/include/configs/XPEDITE5370.h b/include/configs/XPEDITE5370.h index 1d6091c..fc4a986 100644 --- a/include/configs/XPEDITE5370.h +++ b/include/configs/XPEDITE5370.h @@ -99,8 +99,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); #define CONFIG_SYS_CCSRBAR 0xef000000 /* relocated CCSRBAR */ #define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of CCSRBAR */ #define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */ -#define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_CCSRBAR + 0xa000) -#define CONFIG_SYS_PCIE2_ADDR (CONFIG_SYS_CCSRBAR + 0x9000) /* * Diagnostics diff --git a/include/configs/sbc8548.h b/include/configs/sbc8548.h index 3f4056e..c8b8d0d 100644 --- a/include/configs/sbc8548.h +++ b/include/configs/sbc8548.h @@ -109,10 +109,6 @@ #define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of CCSRBAR */ #define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */ -#define CONFIG_SYS_PCI1_ADDR (CONFIG_SYS_CCSRBAR+0x8000) -#define CONFIG_SYS_PCI2_ADDR (CONFIG_SYS_CCSRBAR+0x9000) -#define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_CCSRBAR+0xa000) - /* DDR Setup */ #define CONFIG_FSL_DDR2 #undef CONFIG_FSL_DDR_INTERACTIVE -- 1.6.0.6

2 10

[U-Boot] [PATCH 1/2] fdt: Add fdt_translate_address to convert reg node to cpu phys addr
by Kumar Gala 21 Jul '10

21 Jul '10

This code is extracted out of the Linux Kernel code from arch/powerpc/kernel/prom_parse.c. We maintain some of the same structure to support multiple bus types even though we only have one in the current code. In the future we might want to translate across a PCI bus and thus it will be easier to add that functionality back in. Signed-off-by: Kumar Gala <galak(a)kernel.crashing.org> --- common/fdt_support.c | 264 +++++++++++++++++++++++++++++++++++++++++++++++++ include/fdt_support.h | 1 + 2 files changed, 265 insertions(+), 0 deletions(-) diff --git a/common/fdt_support.c b/common/fdt_support.c index 4d87135..70ad81d 100644 --- a/common/fdt_support.c +++ b/common/fdt_support.c @@ -2,6 +2,8 @@ * (C) Copyright 2007 * Gerald Van Baren, Custom IDEAS, vanbaren(a)cideas.com * + * Copyright 2010 Freescale Semiconductor, Inc. + * * See file CREDITS for list of people who contributed to this * project. * @@ -861,3 +863,265 @@ void fdt_del_node_and_alias(void *blob, const char *alias) off = fdt_path_offset(blob, "/aliases"); fdt_delprop(blob, off, alias); } + +/* Helper to read a big number; size is in cells (not bytes) */ +static inline u64 of_read_number(const __be32 *cell, int size) +{ + u64 r = 0; + while (size--) + r = (r << 32) | be32_to_cpu(*(cell++)); + return r; +} + +static int of_n_cells(const void *blob, int nodeoffset, const char *name) +{ + int np; + const int *ip; + + do { + np = fdt_parent_offset(blob, nodeoffset); + + if (np >= 0) + nodeoffset = np; + ip = (int *)fdt_getprop(blob, nodeoffset, name, NULL); + if (ip) + return be32_to_cpup(ip); + } while (np >= 0); + + /* No #<NAME>-cells property for the root node */ + return 1; +} + +int of_n_addr_cells(const void *blob, int nodeoffset) +{ + return of_n_cells(blob, nodeoffset, "#address-cells"); +} + +int of_n_size_cells(const void *blob, int nodeoffset) +{ + return of_n_cells(blob, nodeoffset, "#size-cells"); +} + +#define PRu64 "%llx" + +/* Max address size we deal with */ +#define OF_MAX_ADDR_CELLS 4 +#define OF_BAD_ADDR ((u64)-1) +#define OF_CHECK_COUNTS(na, ns) ((na) > 0 && (na) <= OF_MAX_ADDR_CELLS && \ + (ns) > 0) + +/* Debug utility */ +#ifdef DEBUG +static void of_dump_addr(const char *s, const u32 *addr, int na) +{ + printf("%s", s); + while(na--) + printf(" %08x", *(addr++)); + printf("\n"); +} +#else +static void of_dump_addr(const char *s, const u32 *addr, int na) { } +#endif + +/* Callbacks for bus specific translators */ +struct of_bus { + const char *name; + const char *addresses; + void (*count_cells)(void *blob, int offset, + int *addrc, int *sizec); + u64 (*map)(u32 *addr, const u32 *range, + int na, int ns, int pna); + int (*translate)(u32 *addr, u64 offset, int na); +}; + +/* Default translator (generic bus) */ +static void of_bus_default_count_cells(void *blob, int offset, + int *addrc, int *sizec) +{ + if (addrc) + *addrc = of_n_addr_cells(blob, offset); + if (sizec) + *sizec = of_n_size_cells(blob, offset); +} + +static u64 of_bus_default_map(u32 *addr, const u32 *range, + int na, int ns, int pna) +{ + u64 cp, s, da; + + cp = of_read_number(range, na); + s = of_read_number(range + na + pna, ns); + da = of_read_number(addr, na); + + debug("OF: default map, cp="PRu64", s="PRu64", da="PRu64"\n", + cp, s, da); + + if (da < cp || da >= (cp + s)) + return OF_BAD_ADDR; + return da - cp; +} + +static int of_bus_default_translate(u32 *addr, u64 offset, int na) +{ + u64 a = of_read_number(addr, na); + memset(addr, 0, na * 4); + a += offset; + if (na > 1) + addr[na - 2] = a >> 32; + addr[na - 1] = a & 0xffffffffu; + + return 0; +} + +/* Array of bus specific translators */ +static struct of_bus of_busses[] = { + /* Default */ + { + .name = "default", + .addresses = "reg", + .count_cells = of_bus_default_count_cells, + .map = of_bus_default_map, + .translate = of_bus_default_translate, + }, +}; + +static int of_translate_one(void * blob, int parent, struct of_bus *bus, + struct of_bus *pbus, u32 *addr, + int na, int ns, int pna, const char *rprop) +{ + const u32 *ranges; + int rlen; + int rone; + u64 offset = OF_BAD_ADDR; + + /* Normally, an absence of a "ranges" property means we are + * crossing a non-translatable boundary, and thus the addresses + * below the current not cannot be converted to CPU physical ones. + * Unfortunately, while this is very clear in the spec, it's not + * what Apple understood, and they do have things like /uni-n or + * /ht nodes with no "ranges" property and a lot of perfectly + * useable mapped devices below them. Thus we treat the absence of + * "ranges" as equivalent to an empty "ranges" property which means + * a 1:1 translation at that level. It's up to the caller not to try + * to translate addresses that aren't supposed to be translated in + * the first place. --BenH. + */ + ranges = (u32 *)fdt_getprop(blob, parent, rprop, &rlen); + if (ranges == NULL || rlen == 0) { + offset = of_read_number(addr, na); + memset(addr, 0, pna * 4); + debug("OF: no ranges, 1:1 translation\n"); + goto finish; + } + + debug("OF: walking ranges...\n"); + + /* Now walk through the ranges */ + rlen /= 4; + rone = na + pna + ns; + for (; rlen >= rone; rlen -= rone, ranges += rone) { + offset = bus->map(addr, ranges, na, ns, pna); + if (offset != OF_BAD_ADDR) + break; + } + if (offset == OF_BAD_ADDR) { + debug("OF: not found !\n"); + return 1; + } + memcpy(addr, ranges + na, 4 * pna); + + finish: + of_dump_addr("OF: parent translation for:", addr, pna); + debug("OF: with offset: "PRu64"\n", offset); + + /* Translate it into parent bus space */ + return pbus->translate(addr, offset, pna); +} + +/* + * Translate an address from the device-tree into a CPU physical address, + * this walks up the tree and applies the various bus mappings on the + * way. + * + * Note: We consider that crossing any level with #size-cells == 0 to mean + * that translation is impossible (that is we are not dealing with a value + * that can be mapped to a cpu physical address). This is not really specified + * that way, but this is traditionally the way IBM at least do things + */ +u64 __of_translate_address(void *blob, int node_offset, const u32 *in_addr, + const char *rprop) +{ + int parent; + struct of_bus *bus, *pbus; + u32 addr[OF_MAX_ADDR_CELLS]; + int na, ns, pna, pns; + u64 result = OF_BAD_ADDR; + + debug("OF: ** translation for device %s **\n", + fdt_get_name(blob, node_offset, NULL)); + + /* Get parent & match bus type */ + parent = fdt_parent_offset(blob, node_offset); + if (parent < 0) + goto bail; + bus = &of_busses[0]; + + /* Cound address cells & copy address locally */ + bus->count_cells(blob, node_offset, &na, &ns); + if (!OF_CHECK_COUNTS(na, ns)) { + printf("%s: Bad cell count for %s\n", __FUNCTION__, + fdt_get_name(blob, node_offset, NULL)); + goto bail; + } + memcpy(addr, in_addr, na * 4); + + debug("OF: bus is %s (na=%d, ns=%d) on %s\n", + bus->name, na, ns, fdt_get_name(blob, parent, NULL)); + of_dump_addr("OF: translating address:", addr, na); + + /* Translate */ + for (;;) { + /* Switch to parent bus */ + node_offset = parent; + parent = fdt_parent_offset(blob, node_offset); + + /* If root, we have finished */ + if (parent < 0) { + debug("OF: reached root node\n"); + result = of_read_number(addr, na); + break; + } + + /* Get new parent bus and counts */ + pbus = &of_busses[0]; + pbus->count_cells(blob, node_offset, &pna, &pns); + if (!OF_CHECK_COUNTS(pna, pns)) { + printf("%s: Bad cell count for %s\n", __FUNCTION__, + fdt_get_name(blob, node_offset, NULL)); + break; + } + + debug("OF: parent bus is %s (na=%d, ns=%d) on %s\n", + pbus->name, pna, pns, fdt_get_name(blob, parent, NULL)); + + /* Apply bus translation */ + if (of_translate_one(blob, node_offset, bus, pbus, + addr, na, ns, pna, rprop)) + break; + + /* Complete the move up one level */ + na = pna; + ns = pns; + bus = pbus; + + of_dump_addr("OF: one level translation:", addr, na); + } + bail: + + return result; +} + +u64 fdt_translate_address(void *blob, int node_offset, const u32 *in_addr) +{ + return __of_translate_address(blob, node_offset, in_addr, "ranges"); +} diff --git a/include/fdt_support.h b/include/fdt_support.h index fc16159..78c38b2 100644 --- a/include/fdt_support.h +++ b/include/fdt_support.h @@ -83,6 +83,7 @@ int fdt_fixup_nor_flash_size(void *blob, int cs, u32 size); void fdt_fixup_mtdparts(void *fdt, void *node_info, int node_info_size); void fdt_del_node_and_alias(void *blob, const char *alias); +u64 fdt_translate_address(void *blob, int node_offset, const u32 *in_addr); #endif /* ifdef CONFIG_OF_LIBFDT */ #endif /* ifndef __FDT_SUPPORT_H */ -- 1.6.0.6

2 7

[U-Boot] mtd partition &kernel
by Fundu 21 Jul '10

21 Jul '10

does the kernel know about different mtd partition from the boot loader? How do I go about creating a new mtd partition say /var/logs. I'm using a mini2440 board which has 4 mtd partition uboot uboot-env kernel rootfs I want to add another one, how do I go about doing that? TIA

2 1

[U-Boot] Virtual Private Answering Service - Never Miss A Call Again!
by Private Virtual Live Answering Service! 21 Jul '10

21 Jul '10

GLOBAL MARKETING CALLWAVE ANSWERING SERVICE Do you need to step away for lunch breaks, go on vacation or busy with clients? We offer NO MORE MISSED CALLS!! We will be delighted to handle your important & private incoming calls................. BONUS MONTHLY SPECIAL! **Join Now or Renew services by the end of your renewal billing cycle and receive 30 minutes FREE call time.** ** No Account Setup Fee ** ** We offer affordable flat weekly and monthly rates ** ** Forward your calls to our live operators while your away! ** Our professional speaking remote live operators are available 24/7 at your service! ** About Global Marketing Callwave Answering Service Global Marketing Callwave Answering Service provides answering service to all businesses across the USA. We pride ourselves on having excellent customer service, and using the best call center operators to keep our customers satisfied. We work with you to customize a plan and to customize our service for each business. We feel each business in unique and its answering service needs are equally unique. Who is Global Marketing Callwave Answering Service? Global Marketing Callwave Answering Service is the best of the best; our many years in the answering service business have given us a great wisdom in dealing with customers and call centers. We all companies, regardless of size, budget, or what your business does, we are a company designed to aid you business in succeeding. We pride ourselves in being a company based upon providing business with the most affordable answering service; we give you the most for your money. We are a bare bones business, not fluff what you see is what you get, and what you get is a reliable company with great customer service who's main concern is helping your business grow. Every business has the ability to customize how they want their calls to be answered. What you want the operator to say, what type of message you would like the operator to take, how much information from each caller should the operator take, perhaps you would like the operator to know a certain amount of information so they can answer general questions, the list goes on. Global Marketing Callwave Answering Service is all about customizability, each business is unique and therefore deserves a unique operating system. We offer the most customizable operating system, the most customizable pricing, and the best customer service. What Global Marketing Callwave Answering Service Offer Businesses: * Quick Setup - We Get Businesses Started Within 24 Hours * Per Minute & Per Call Plans To Accommodate Any Business * Pay as you use services month to month, no contracts! * Operators Act as Representatives of your Business * 24/7 Live Operator Service * Great reliable on call answering service for small to large businesses! * Comprehensive List of Call Center Services Answering Services include the following: Order Entry Message Taking Call Patching Voice Mail Service Nextel Radio Dispatch Remote Secretary Call Directing Office Call Overflow Service Wake-Up Service Automatic Message Dispatch Manual Message Dispatch Call Scheduling Appointment Scheduling Email Message Delivery Emergency Dispatching Emergency Tracking Substitute Teacher Location Staffing Services Referral services 24-Hour coverage Credit Card Confirm Emergency Access Information Desk Referrals Dealer Location Alpha Paging Message Dispatch Fax Message Delivery Voice Mail Service Radio Dispatch Select your callwave answering service plan: http://globalmarketingspecialistgroup.com/ad_application_17.html How To Sign Up! 1 - We will need a brief introduction of your company details and what you need exactly, telephone script details and overview on your products or business services. 2 - Forward your telephone number to our live answering service. 3 - We are now LIVE and ready to take your calls! We will login to our terminals at your selected date and times that you request for our live operator staff to take your incoming customer and client calls. Your account will be activated within 24 hours of placing your order. For more information on how to get your live or after hours answering service activated please call us at 1-785-310-9408, email - marketing(a)globalmarketingspecialistgroup.com to consult with a live sales representative. Your messages, appointments etc. will be delivered to you at your choice of the following: Faxing Email Telephone Text Message Skype, Yahoo & AIM Chat Messenger Online Web Calendar ===================================== Answering Service Global Marketing Callwave Answering Service is an answering service and call center that helps businesses grow by offering our skilled telephone operators to answer your phone calls when you are unavailable. Our answering service is available when you need us and we are sure to offer the right service plan to fit your business. How We Can Benefit Your Business An answering service is beneficial to businesses as the service can help keep costs down while helping to grow business by providing live access to a company staff member at any hour of the day. When you use an answering service, there is nothing to install and no new equipment to buy. Our answering service, like many other services, operate on the principle of call forwarding. When you want our service to answer your calls, simply forward your phones to us. Our service is a live phone answering service which means we are a live service - our operators always answer the phone after it rings with your customized greeting (unless you prefer an automated answer). How we answer the phone and process your messages are customized to meet the needs of your business. If you need our answering service to schedule appointments or want your messages delivered in real time as they occur, we are able to customize your service to meet not your needs. You will never have to change your company to fit into our service. 24 hours a day, 7 days a week, our live answering service & call center is able and here to assist your needs. Why You Need An Answering Service? No matter the size of your business, you will most likely not have enough time to answer each phone call, because it will not give you enough time to finish the necessary tasks to keep your business running. Now you are probably thinking if I do not answer the phone I am going to lose important business, yes you are. Just think though what is more important, answering every phone call or getting paperwork done so the business does not go under, the latter option is the correct answer. Therefore, you need an answering service so you can still take phone calls to keep important business and keep your company thriving. You need a live operator because anyone who calls your business and gets a voicemail will be put off and simply move onto one of your competitors, studies show this happens 75% of the time. Available Answering Service & Inbound Call Center Services Doctor, Physician, Surgeon, Medical Specialist Answering Service Psychiatrist, Psychologist, Counselor, Mental Health Professional Answering Service Home Health Business, Hospice Nurse, Palliative Care Professional Answering Service HVAC, Refrigeration, Duct Installer, Chimney Business Answering Service General Contractor, Builder, Construction Firm Answering Service Disaster Restoration Firm, Janitorial Company Answering Service Plumber, Plumbing Supply Company Answering Service Realtor®, Real Estate Affiliated Business Answering Service Apartment Complex, Property Management Firm Answering Service E-Commerce Business, Internet Driven Business Answering Service Association, Large Corporation, Organization, Hospital System Answering Service Limousine Company, Taxi Business Answering Service Funeral Home, Crematory, Cemetery, Mortician Answering Service Locksmith, Lock Repair Specialists Answering Service Elevator Repair Business, Emergency Elevator Service Answering Service How can we help you? Online Message Relay Form: http://globalmarketingspecialistgroup.com/message_center_30.html What We Cover: Call Center Services: Everything from live web chat, catalog order taking, credit card processing, order entry, order tracking, up-sell, cross-sell, product answering, help desk services, high volume support, appointment setting, and total product fulfillment. Business Answering Service: Specialty Answering Service is dedicated to providing large and small businesses an excellent and affordable 24/7 live operator business answering service solution. Our business answering service can assist with sales, receptionist services, and customer service. Outbound Call Center Services: Surveys, outbound telemarketing, customer service support, and ongoing or short term customer contact. Our outbound call center services are equipped to handle small business to enterprise level outbound call campaigns. Answering Service: We are answering service experts. We provide 24 hour live operator telephone answering service support to all business in all industries. We are available as a full time answering service receptionist or as en after hours answering service or overflow service. Its not just a question; it is our philosophy and the cornerstone of everything that we do. At Global Marketing Specialist Group, we continually find innovative ways to help our clients make a profitable connection with their customers and other businesses through the latest technology. Our award winning services include: Live Answering Service Receptionist Services Transportation, Travel & Hotel Reservations 24/7 In-Bound Services Overflow and After Hours Calls Lunch Breaks & Down Time Emergency Services Fulfillment Outbound Projects Toll-Free Answering Appointment Scheduling Voicemail & Pager Services Lead Generation In-Bound Sales and Order Taking Complete Marketing Research Internet Lead Source Management and more............ Medical Management Live Chat Live Internet Operators Loan & Credit Applications Order Taking & Fulfillment Outbound Telemarketing Virtual Receptionist 800 Numbers Toll Free Pagers 24/7 Live Answering Service Appointment Scheduling Conference Calling Dealer Locate with Live Operators Help Desk & Customer Service Lead Generation Insurance Claims Processing Intelligent Messaging Get your messages up to the minute from customers and clients. Eliminate 90% of your Appointments, Reservation Bookings, Customer Calls Let us handle your incoming calls off site, and enjoy unrestricted access to your phone lines. Valuable phone lines are free to be used for inbound customer/patient questions or outbound follow-up calls. Do you have customers/patients who cannot call during your normal business hours? No problem. Trust the highly trained Available live operators to make the appointment accurately and cost-effectively. Gain New Business Open yourself for new business with an appointment scheduling service that never closes! Our clients have found this service to be very effective in beating competitors for new customers. Our operators can add any sales message you would like to include at the time of the appointment scheduling to highlight an upcoming seminar, new product introduction, or special offer. The best news is that our representatives are available 24 hours a day, 7 days a week. We have unlimited seating...Whether shared or dedicated, we will give you the coverage you need! Put our 20 years of experience to work for you. Monthly Callwave Answering Service Rates Per minute overage - $0.85 Callwave Hourly Minutes - 60 Flat hourly rate - $75.00 ===================================== Light Callwave Minutes - 100 Flat rate per week or month depending on your usage - $95.00 ===================================== Medium Light Callwave Minutes - 180 Flat rate per week or month depending on your usage - $155.00 ===================================== Medium Callwave Minutes - 250 Flat rate per week or month depending on your usage - $215.00 ===================================== Durablast Callwave Minutes - 375 Flat rate per week or month depending on your usage - $315.00 ===================================== Super Power Callwave Minutes - 500 Flat rate per week or month depending on your usage - $425.00 ===================================== Bronze Callwave Minutes - 750 Flat rate per week or month depending on your usage - $600.00 ===================================== Golden Callwave Minutes - 1,000 Flat rate per week or month depending on your usage - $850.00 ===================================== Platinum Callwave Minutes - 1,200 Flat rate per week or month depending on your usage - $1,040.00 ===================================== Solid Platinum Callwave Minutes - 1,500 Flat rate per week or month depending on your usage - $1,325.00 ===================================== Solid Gold Platinum Callwave Minutes - 1,680 Flat rate per week or month depending on your usage - $1,550.00 ===================================== Platinum Plus Callwave Minutes - 2,000 Flat rate per week or month depending on your usage - $1,650.00 **Additional Plans Available for Higher Volume ===================================== Contact Request or Opt Out - http://globalmarketingspecialistgroup.com/contact_us_8.html

1 0

[U-Boot] Virtual Private Answering Service - Never Miss A Call Again!
by Private Virtual Live Answering Service! 21 Jul '10

21 Jul '10

GLOBAL MARKETING CALLWAVE ANSWERING SERVICE Do you need to step away for lunch breaks, go on vacation or busy with clients? We offer NO MORE MISSED CALLS!! We will be delighted to handle your important & private incoming calls................. BONUS MONTHLY SPECIAL! **Join Now or Renew services by the end of your renewal billing cycle and receive 30 minutes FREE call time.** ** No Account Setup Fee ** ** We offer affordable flat weekly and monthly rates ** ** Forward your calls to our live operators while your away! ** Our professional speaking remote live operators are available 24/7 at your service! ** About Global Marketing Callwave Answering Service Global Marketing Callwave Answering Service provides answering service to all businesses across the USA. We pride ourselves on having excellent customer service, and using the best call center operators to keep our customers satisfied. We work with you to customize a plan and to customize our service for each business. We feel each business in unique and its answering service needs are equally unique. Who is Global Marketing Callwave Answering Service? Global Marketing Callwave Answering Service is the best of the best; our many years in the answering service business have given us a great wisdom in dealing with customers and call centers. We all companies, regardless of size, budget, or what your business does, we are a company designed to aid you business in succeeding. We pride ourselves in being a company based upon providing business with the most affordable answering service; we give you the most for your money. We are a bare bones business, not fluff what you see is what you get, and what you get is a reliable company with great customer service who's main concern is helping your business grow. Every business has the ability to customize how they want their calls to be answered. What you want the operator to say, what type of message you would like the operator to take, how much information from each caller should the operator take, perhaps you would like the operator to know a certain amount of information so they can answer general questions, the list goes on. Global Marketing Callwave Answering Service is all about customizability, each business is unique and therefore deserves a unique operating system. We offer the most customizable operating system, the most customizable pricing, and the best customer service. What Global Marketing Callwave Answering Service Offer Businesses: * Quick Setup - We Get Businesses Started Within 24 Hours * Per Minute & Per Call Plans To Accommodate Any Business * Pay as you use services month to month, no contracts! * Operators Act as Representatives of your Business * 24/7 Live Operator Service * Great reliable on call answering service for small to large businesses! * Comprehensive List of Call Center Services Answering Services include the following: Order Entry Message Taking Call Patching Voice Mail Service Nextel Radio Dispatch Remote Secretary Call Directing Office Call Overflow Service Wake-Up Service Automatic Message Dispatch Manual Message Dispatch Call Scheduling Appointment Scheduling Email Message Delivery Emergency Dispatching Emergency Tracking Substitute Teacher Location Staffing Services Referral services 24-Hour coverage Credit Card Confirm Emergency Access Information Desk Referrals Dealer Location Alpha Paging Message Dispatch Fax Message Delivery Voice Mail Service Radio Dispatch Select your callwave answering service plan: http://globalmarketingspecialistgroup.com/ad_application_17.html How To Sign Up! 1 - We will need a brief introduction of your company details and what you need exactly, telephone script details and overview on your products or business services. 2 - Forward your telephone number to our live answering service. 3 - We are now LIVE and ready to take your calls! We will login to our terminals at your selected date and times that you request for our live operator staff to take your incoming customer and client calls. Your account will be activated within 24 hours of placing your order. For more information on how to get your live or after hours answering service activated please call us at 1-785-310-9408, email - marketing(a)globalmarketingspecialistgroup.com to consult with a live sales representative. Your messages, appointments etc. will be delivered to you at your choice of the following: Faxing Email Telephone Text Message Skype, Yahoo & AIM Chat Messenger Online Web Calendar ===================================== Answering Service Global Marketing Callwave Answering Service is an answering service and call center that helps businesses grow by offering our skilled telephone operators to answer your phone calls when you are unavailable. Our answering service is available when you need us and we are sure to offer the right service plan to fit your business. How We Can Benefit Your Business An answering service is beneficial to businesses as the service can help keep costs down while helping to grow business by providing live access to a company staff member at any hour of the day. When you use an answering service, there is nothing to install and no new equipment to buy. Our answering service, like many other services, operate on the principle of call forwarding. When you want our service to answer your calls, simply forward your phones to us. Our service is a live phone answering service which means we are a live service - our operators always answer the phone after it rings with your customized greeting (unless you prefer an automated answer). How we answer the phone and process your messages are customized to meet the needs of your business. If you need our answering service to schedule appointments or want your messages delivered in real time as they occur, we are able to customize your service to meet not your needs. You will never have to change your company to fit into our service. 24 hours a day, 7 days a week, our live answering service & call center is able and here to assist your needs. Why You Need An Answering Service? No matter the size of your business, you will most likely not have enough time to answer each phone call, because it will not give you enough time to finish the necessary tasks to keep your business running. Now you are probably thinking if I do not answer the phone I am going to lose important business, yes you are. Just think though what is more important, answering every phone call or getting paperwork done so the business does not go under, the latter option is the correct answer. Therefore, you need an answering service so you can still take phone calls to keep important business and keep your company thriving. You need a live operator because anyone who calls your business and gets a voicemail will be put off and simply move onto one of your competitors, studies show this happens 75% of the time. Available Answering Service & Inbound Call Center Services Doctor, Physician, Surgeon, Medical Specialist Answering Service Psychiatrist, Psychologist, Counselor, Mental Health Professional Answering Service Home Health Business, Hospice Nurse, Palliative Care Professional Answering Service HVAC, Refrigeration, Duct Installer, Chimney Business Answering Service General Contractor, Builder, Construction Firm Answering Service Disaster Restoration Firm, Janitorial Company Answering Service Plumber, Plumbing Supply Company Answering Service Realtor®, Real Estate Affiliated Business Answering Service Apartment Complex, Property Management Firm Answering Service E-Commerce Business, Internet Driven Business Answering Service Association, Large Corporation, Organization, Hospital System Answering Service Limousine Company, Taxi Business Answering Service Funeral Home, Crematory, Cemetery, Mortician Answering Service Locksmith, Lock Repair Specialists Answering Service Elevator Repair Business, Emergency Elevator Service Answering Service How can we help you? Online Message Relay Form: http://globalmarketingspecialistgroup.com/message_center_30.html What We Cover: Call Center Services: Everything from live web chat, catalog order taking, credit card processing, order entry, order tracking, up-sell, cross-sell, product answering, help desk services, high volume support, appointment setting, and total product fulfillment. Business Answering Service: Specialty Answering Service is dedicated to providing large and small businesses an excellent and affordable 24/7 live operator business answering service solution. Our business answering service can assist with sales, receptionist services, and customer service. Outbound Call Center Services: Surveys, outbound telemarketing, customer service support, and ongoing or short term customer contact. Our outbound call center services are equipped to handle small business to enterprise level outbound call campaigns. Answering Service: We are answering service experts. We provide 24 hour live operator telephone answering service support to all business in all industries. We are available as a full time answering service receptionist or as en after hours answering service or overflow service. Its not just a question; it is our philosophy and the cornerstone of everything that we do. At Global Marketing Specialist Group, we continually find innovative ways to help our clients make a profitable connection with their customers and other businesses through the latest technology. Our award winning services include: Live Answering Service Receptionist Services Transportation, Travel & Hotel Reservations 24/7 In-Bound Services Overflow and After Hours Calls Lunch Breaks & Down Time Emergency Services Fulfillment Outbound Projects Toll-Free Answering Appointment Scheduling Voicemail & Pager Services Lead Generation In-Bound Sales and Order Taking Complete Marketing Research Internet Lead Source Management and more............ Medical Management Live Chat Live Internet Operators Loan & Credit Applications Order Taking & Fulfillment Outbound Telemarketing Virtual Receptionist 800 Numbers Toll Free Pagers 24/7 Live Answering Service Appointment Scheduling Conference Calling Dealer Locate with Live Operators Help Desk & Customer Service Lead Generation Insurance Claims Processing Intelligent Messaging Get your messages up to the minute from customers and clients. Eliminate 90% of your Appointments, Reservation Bookings, Customer Calls Let us handle your incoming calls off site, and enjoy unrestricted access to your phone lines. Valuable phone lines are free to be used for inbound customer/patient questions or outbound follow-up calls. Do you have customers/patients who cannot call during your normal business hours? No problem. Trust the highly trained Available live operators to make the appointment accurately and cost-effectively. Gain New Business Open yourself for new business with an appointment scheduling service that never closes! Our clients have found this service to be very effective in beating competitors for new customers. Our operators can add any sales message you would like to include at the time of the appointment scheduling to highlight an upcoming seminar, new product introduction, or special offer. The best news is that our representatives are available 24 hours a day, 7 days a week. We have unlimited seating...Whether shared or dedicated, we will give you the coverage you need! Put our 20 years of experience to work for you. Monthly Callwave Answering Service Rates Per minute overage - $0.85 Callwave Hourly Minutes - 60 Flat hourly rate - $75.00 ===================================== Light Callwave Minutes - 100 Flat rate per week or month depending on your usage - $95.00 ===================================== Medium Light Callwave Minutes - 180 Flat rate per week or month depending on your usage - $155.00 ===================================== Medium Callwave Minutes - 250 Flat rate per week or month depending on your usage - $215.00 ===================================== Durablast Callwave Minutes - 375 Flat rate per week or month depending on your usage - $315.00 ===================================== Super Power Callwave Minutes - 500 Flat rate per week or month depending on your usage - $425.00 ===================================== Bronze Callwave Minutes - 750 Flat rate per week or month depending on your usage - $600.00 ===================================== Golden Callwave Minutes - 1,000 Flat rate per week or month depending on your usage - $850.00 ===================================== Platinum Callwave Minutes - 1,200 Flat rate per week or month depending on your usage - $1,040.00 ===================================== Solid Platinum Callwave Minutes - 1,500 Flat rate per week or month depending on your usage - $1,325.00 ===================================== Solid Gold Platinum Callwave Minutes - 1,680 Flat rate per week or month depending on your usage - $1,550.00 ===================================== Platinum Plus Callwave Minutes - 2,000 Flat rate per week or month depending on your usage - $1,650.00 **Additional Plans Available for Higher Volume ===================================== Contact Request or Opt Out - http://globalmarketingspecialistgroup.com/contact_us_8.html

1 0