October 2009 - U-Boot

[U-Boot] [PATCH] envcrc: check return value of fwrite()
by Mike Frysinger 19 Oct '09

19 Oct '09

Newer toolchains will often complain about unchecked fwrite(): envcrc.c:117: warning: ignoring return value of ‘fwrite’, declared with attribute warn_unused_result So check the return value to silence the warnings. Signed-off-by: Mike Frysinger <vapier(a)gentoo.org> --- tools/envcrc.c | 4 +++- 1 files changed, 3 insertions(+), 1 deletions(-) diff --git a/tools/envcrc.c b/tools/envcrc.c index d02a7db..d1e84b3 100644 --- a/tools/envcrc.c +++ b/tools/envcrc.c @@ -21,6 +21,7 @@ * MA 02111-1307 USA */ +#include <errno.h> #include <stdio.h> #include <stdint.h> #include <stdlib.h> @@ -114,7 +115,8 @@ int main (int argc, char **argv) } for (i = start; i != end; i += step) printf("%c", (crc & (0xFF << (i * 8))) >> (i * 8)); - fwrite(dataptr, 1, datasize, stdout); + if (fwrite(dataptr, 1, datasize, stdout) != datasize) + fprintf(stderr, "fwrite() failed: %s\n", strerror(errno)); } else { printf("CRC32 from offset %08X to %08X of environment = %08X\n", (unsigned int) (dataptr - envptr), -- 1.6.5.1

2 1

[U-Boot] ARM pull request
by Tom 19 Oct '09

19 Oct '09

The following changes since commit a380279b2abe130c2d3d2c8de36f8ff98bc6b3b0: Daniel Gorsulowski (1): at91: Update MEESC board support are available in the git repository at: git://git.denx.de/u-boot-arm master-sync Eric Benard (3): CPU9260 : fix machine ID when using a CPU9G20. fix CPU9260/CPU9G20 compile warnings main.c: In function 'abortboot': Minkyu Kang (4): s5pc1xx: support Samsung s5pc1xx SoC s5pc1xx: support onenand driver s5pc1xx: support serial driver s5pc1xx: add support SMDKC100 board Nishanth Menon (4): OMAP3: export enable_gpmc_cs_config to board files OMAP3: fix warnings when NAND/ONENAND is not used OMAP3: Fix SDRC init TI OMAP3: make gpmc_config as const Sandeep Paulraj (13): TI DaVinci DM355: Fix Compilation warning for DM355 EVM TI DaVinci DM365: Fix Compilation warning for DM365 EVM TI DaVinci DM646x: Adding initial support for DM6467 EVM TI: DaVinci: DM355 Leopard board support TI DaVinci: Maintainer for DM355 and DM365 EVM TI: OMAP3: Remove SZ_xx references TI DaVinci DM355: Add Config option for 64 bit Support TI DaVinci DM365: Add Config option for 64 bit Support TI DaVinci DVEVM: Add Config option for 64 bit Support TI DaVinci Sonata: Add Config option for 64 bit Support TI DaVinci: DM355 Leopard: Fix compilation warning TI DaVinci: Fix DM6467 EVM Compilation Warning TI DaVinci: Adding Copyright for DM365 EVM Simon Kagstrom (1): arm926ejs: 8-byte align stack to avoid LDRD/STRD problems Steve Sakoman (2): TI: OMAP3: Refactors the SM911x driver OMAP3: Update Overo and Beagle environment Tom Rix (2): Zoom2 Fix serial gpmc setup TI OMAP3 SDP3430: Initial Support kevin.morfitt(a)fearnside-systems.co.uk (5): CONFIG_SYS_HZ fix for ARM902T S3C24X0 Boards Clean-up of cpu_arm920t and cpu_arm920t_s3c24x0 code Clean-up of s3c24x0 header files Clean-up of s3c24x0 drivers excluding nand driver Clean-up of s3c24x0 nand driver MAINTAINERS | 12 + MAKEALL | 4 + Makefile | 12 + board/davinci/dm355evm/dm355evm.c | 4 +- board/davinci/dm355leopard/Makefile | 52 ++ board/davinci/dm355leopard/config.mk | 6 + board/davinci/dm355leopard/dm355leopard.c | 98 +++ board/davinci/dm365evm/dm365evm.c | 5 +- board/davinci/dm6467evm/Makefile | 52 ++ board/davinci/dm6467evm/config.mk | 2 + board/davinci/dm6467evm/dm6467evm.c | 31 + board/eukrea/cpu9260/cpu9260.c | 2 +- board/logicpd/zoom2/zoom2.c | 5 +- board/mpl/vcma9/vcma9.c | 13 +- board/mpl/vcma9/vcma9.h | 20 +- board/samsung/smdk2400/smdk2400.c | 5 +- board/samsung/smdk2410/smdk2410.c | 5 +- board/samsung/smdkc100/Makefile | 55 ++ board/samsung/smdkc100/config.mk | 16 + board/samsung/smdkc100/lowlevel_init.S | 215 +++++ board/samsung/smdkc100/mem_setup.S | 197 +++++ board/samsung/smdkc100/onenand.c | 83 ++ board/samsung/smdkc100/smdkc100.c | 51 ++ board/sbc2410x/sbc2410x.c | 7 +- board/ti/sdp3430/Makefile | 49 ++ board/ti/sdp3430/config.mk | 33 + board/ti/sdp3430/sdp.c | 204 +++++ board/ti/sdp3430/sdp.h | 417 +++++++++ board/trab/cmd_trab.c | 12 +- board/trab/rs485.c | 12 +- board/trab/trab.c | 17 +- board/trab/trab_fkt.c | 26 +- board/trab/tsc2000.c | 17 +- board/trab/tsc2000.h | 4 +- board/trab/vfd.c | 12 +- common/serial.c | 18 + cpu/arm920t/s3c24x0/interrupts.c | 4 +- cpu/arm920t/s3c24x0/speed.c | 42 +- cpu/arm920t/s3c24x0/timer.c | 110 ++-- cpu/arm920t/s3c24x0/usb.c | 30 +- cpu/arm920t/s3c24x0/usb_ohci.c | 1323 +++++++++++++++-------------- cpu/arm920t/s3c24x0/usb_ohci.h | 209 +++--- cpu/arm920t/start.S | 63 +- cpu/arm926ejs/start.S | 1 + cpu/arm_cortexa8/omap3/mem.c | 21 +- cpu/arm_cortexa8/omap3/sys_info.c | 2 +- cpu/arm_cortexa8/s5pc1xx/Makefile | 53 ++ cpu/arm_cortexa8/s5pc1xx/cache.c | 43 + cpu/arm_cortexa8/s5pc1xx/clock.c | 308 +++++++ cpu/arm_cortexa8/s5pc1xx/cpu_info.c | 57 ++ cpu/arm_cortexa8/s5pc1xx/reset.S | 47 + cpu/arm_cortexa8/s5pc1xx/timer.c | 195 +++++ doc/README.s5pc1xx | 56 ++ drivers/i2c/s3c24x0_i2c.c | 273 +++--- drivers/mtd/nand/s3c2410_nand.c | 62 +- drivers/mtd/onenand/Makefile | 1 + drivers/mtd/onenand/samsung.c | 636 ++++++++++++++ drivers/net/smc911x.c | 12 +- drivers/rtc/s3c24x0_rtc.c | 130 ++-- drivers/serial/Makefile | 1 + drivers/serial/serial_s3c24x0.c | 160 ++-- drivers/serial/serial_s5pc1xx.c | 195 +++++ include/asm-arm/arch-davinci/hardware.h | 2 + include/asm-arm/arch-omap3/cpu.h | 1 + include/asm-arm/arch-omap3/mem.h | 8 +- include/asm-arm/arch-omap3/sys_proto.h | 2 + include/asm-arm/arch-s5pc1xx/clk.h | 32 + include/asm-arm/arch-s5pc1xx/clock.h | 94 ++ include/asm-arm/arch-s5pc1xx/cpu.h | 72 ++ include/asm-arm/arch-s5pc1xx/gpio.h | 129 +++ include/asm-arm/arch-s5pc1xx/power.h | 42 + include/asm-arm/arch-s5pc1xx/pwm.h | 59 ++ include/asm-arm/arch-s5pc1xx/uart.h | 47 + include/configs/cpu9260.h | 1 + include/configs/cpuat91.h | 4 +- include/configs/davinci_dm355evm.h | 1 + include/configs/davinci_dm355leopard.h | 162 ++++ include/configs/davinci_dm365evm.h | 2 + include/configs/davinci_dm6467evm.h | 132 +++ include/configs/davinci_dvevm.h | 1 + include/configs/davinci_sonata.h | 1 + include/configs/devkit8000.h | 15 +- include/configs/omap3_beagle.h | 42 +- include/configs/omap3_evm.h | 15 +- include/configs/omap3_overo.h | 42 +- include/configs/omap3_pandora.h | 15 +- include/configs/omap3_sdp3430.h | 369 ++++++++ include/configs/omap3_zoom1.h | 15 +- include/configs/omap3_zoom2.h | 15 +- include/configs/sbc2410x.h | 4 +- include/configs/smdk2400.h | 4 +- include/configs/smdk2410.h | 4 +- include/configs/smdkc100.h | 242 ++++++ include/configs/trab.h | 12 +- include/linux/mtd/onenand.h | 1 + include/linux/mtd/onenand_regs.h | 4 + include/linux/mtd/samsung_onenand.h | 131 +++ include/s3c2400.h | 494 +---------- include/s3c2410.h | 159 +--- include/s3c24x0.h | 605 ++------------ include/serial.h | 7 + 101 files changed, 6329 insertions(+), 2465 deletions(-) create mode 100644 board/davinci/dm355leopard/Makefile create mode 100644 board/davinci/dm355leopard/config.mk create mode 100644 board/davinci/dm355leopard/dm355leopard.c create mode 100644 board/davinci/dm6467evm/Makefile create mode 100644 board/davinci/dm6467evm/config.mk create mode 100644 board/davinci/dm6467evm/dm6467evm.c create mode 100644 board/samsung/smdkc100/Makefile create mode 100644 board/samsung/smdkc100/config.mk create mode 100644 board/samsung/smdkc100/lowlevel_init.S create mode 100644 board/samsung/smdkc100/mem_setup.S create mode 100644 board/samsung/smdkc100/onenand.c create mode 100644 board/samsung/smdkc100/smdkc100.c create mode 100644 board/ti/sdp3430/Makefile create mode 100644 board/ti/sdp3430/config.mk create mode 100644 board/ti/sdp3430/sdp.c create mode 100644 board/ti/sdp3430/sdp.h create mode 100644 cpu/arm_cortexa8/s5pc1xx/Makefile create mode 100644 cpu/arm_cortexa8/s5pc1xx/cache.c create mode 100644 cpu/arm_cortexa8/s5pc1xx/clock.c create mode 100644 cpu/arm_cortexa8/s5pc1xx/cpu_info.c create mode 100644 cpu/arm_cortexa8/s5pc1xx/reset.S create mode 100644 cpu/arm_cortexa8/s5pc1xx/timer.c create mode 100644 doc/README.s5pc1xx create mode 100644 drivers/mtd/onenand/samsung.c create mode 100644 drivers/serial/serial_s5pc1xx.c create mode 100644 include/asm-arm/arch-s5pc1xx/clk.h create mode 100644 include/asm-arm/arch-s5pc1xx/clock.h create mode 100644 include/asm-arm/arch-s5pc1xx/cpu.h create mode 100644 include/asm-arm/arch-s5pc1xx/gpio.h create mode 100644 include/asm-arm/arch-s5pc1xx/power.h create mode 100644 include/asm-arm/arch-s5pc1xx/pwm.h create mode 100644 include/asm-arm/arch-s5pc1xx/uart.h create mode 100644 include/configs/davinci_dm355leopard.h create mode 100644 include/configs/davinci_dm6467evm.h create mode 100644 include/configs/omap3_sdp3430.h create mode 100644 include/configs/smdkc100.h create mode 100644 include/linux/mtd/samsung_onenand.h

5 9

[U-Boot] davinci_dm355evm_config -make error
by ExpatEgghead 19 Oct '09

19 Oct '09

Hi all The u-boot ti git source code (u-boot-ti) does not seem to build for the dm355evm. I'm getting a "lowlevel_init.S:619:2: error: #error "Unknown DDR configuration!!!" after : make davinci_dm355evm_config make Before I correct this am I missing something? -- --Adrian Edmonds

2 2

[U-Boot] mcc200 build fails (invalid #elif)
by Mike Frysinger 19 Oct '09

19 Oct '09

via MAKEALL: Configuring for mcc200 board... In file included from /usr/local/src/u-boot/blackfin/include/config.h:3, from /usr/local/src/u-boot/blackfin/common/env_embedded.c:28: /usr/local/src/u-boot/blackfin/include/configs/mcc200.h:401:6: error: #elif with no expression -mike

2 3

[U-Boot] imx27lite stability problems.
by javier Martin 19 Oct '09

19 Oct '09

I have tried u-boot for the imx27lite board from LogicPD which is currently in u-boot-arm repository and I have experienced some stability problems: - Sometimes the system gets stuck in serial_getc() from serial_mxc.c driver when printing information (ex. mii read ). - Pings do not work properly, the system gets stuck in fec_send() function waiting always for a frame to be sent (which actually does not happen). - Sometimes the system gets stuck when saving the environment to flash 'saveenv', but other times it does it well. I would like to help to solve this problems, but I don't know exactly where to begin from. I have been reviewing clock settings. Could this be happening because this board is using 32KHz xtal as reference instead of 26MHz one? Have you experienced these problems also? Thank you. -- Javier Martin Vista Silicon S.L. CDTUC - FASE C - Oficina S-345 Avda de los Castros s/n 39005- Santander. Cantabria. Spain +34 942 25 32 60 www.vista-silicon.com

3 9

[U-Boot] Fwd: Re: OMAP3 EVM: Only ONENAND supported, no NAND any more?
by Tuma 19 Oct '09

19 Oct '09

-- Software Developer General Satellite Corp.

1 0

[U-Boot] Confirmed Recipient
by Online-notification 19 Oct '09

19 Oct '09

Your email address has won a lump sum of £539,000.00. To claim your win, contact Mr. Brian Smith on this Email: barr_smith2009(a)live.com

2 1

[U-Boot] [PATCH v1 2/2] NET: Base support for etsec2.0
by Sandeep Gopalpet 19 Oct '09

19 Oct '09

1. Modified the tsec_mdio structure to include the new regs 2. Modified the MDIO_BASE_ADDR so that it will handle both older version and new version of etsec. Signed-off-by: Sandeep Gopalpet <sandeep.kumar(a)freescale.com> --- include/asm-ppc/immap_85xx.h | 6 +++++- include/configs/P1_P2_RDB.h | 5 +++++ include/tsec.h | 13 ++++++++++++- 3 files changed, 22 insertions(+), 2 deletions(-) diff --git a/include/asm-ppc/immap_85xx.h b/include/asm-ppc/immap_85xx.h index 6c9baac..fccfca5 100644 --- a/include/asm-ppc/immap_85xx.h +++ b/include/asm-ppc/immap_85xx.h @@ -1933,10 +1933,14 @@ typedef struct ccsr_gur { (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_USB_OFFSET) /* TSEC and MDIO OFFSETS */ +#ifdef CONFIG_TSECV2 +#define CONFIG_SYS_TSEC1_OFFSET (0xB0000) +#else #define CONFIG_SYS_TSEC1_OFFSET (0x24000) +#endif #define TSEC_SIZE (0x01000) -#define CONFIG_SYS_MDIO1_OFFSET (0x24520) +#define CONFIG_SYS_MDIO1_OFFSET (0x24000) #define MDIO_OFFSET (0x01000) #define TSEC_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET) diff --git a/include/configs/P1_P2_RDB.h b/include/configs/P1_P2_RDB.h index 8e97ad0..77c43e7 100644 --- a/include/configs/P1_P2_RDB.h +++ b/include/configs/P1_P2_RDB.h @@ -68,6 +68,11 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_MP #endif +/* TSECV2 */ +#if defined(CONFIG_P1020) +#define CONFIG_TSECV2 +#endif + /* * These can be toggled for performance analysis, otherwise use default. */ diff --git a/include/tsec.h b/include/tsec.h index 342c07e..a915266 100644 --- a/include/tsec.h +++ b/include/tsec.h @@ -29,7 +29,7 @@ #endif #ifndef CONFIG_SYS_MDIO1_OFFSET - #define CONFIG_SYS_MDIO1_OFFSET (0x24520) + #define CONFIG_SYS_MDIO1_OFFSET (0x24000) #endif #ifndef MDIO_OFFSET @@ -478,14 +478,25 @@ typedef struct tsec_hash_regs uint res2[24]; } tsec_hash_t; +/* MDIO structure for etsec2.0. + * Backward compatible to etsec1.x + */ + typedef struct tsec_mdio { + uint res1[4]; + uint ieventm; /* MDIO Interrupt event register */ + uint imaskm; /* MDIO Interrupt mask register */ + uint res2; + uint emapm; /* MDIO Event mapping register */ + uint res3[320]; uint miimcfg; /* MII Management: Configuration */ uint miimcom; /* MII Management: Command */ uint miimadd; /* MII Management: Address */ uint miimcon; /* MII Management: Control */ uint miimstat; /* MII Management: Status */ uint miimind; /* MII Management: Indicators */ + uint res4[690]; } tsec_mdio_t; typedef struct tsec -- 1.5.2.2

3 2

[U-Boot] [PATCH] Cleanup: use constant
by Niklaus Giger 19 Oct '09

19 Oct '09

Signed-off-by: Niklaus Giger <niklaus.giger(a)netstal.com> --- common/miiphyutil.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/common/miiphyutil.c b/common/miiphyutil.c index 66fd9ca..196ef4a 100644 --- a/common/miiphyutil.c +++ b/common/miiphyutil.c @@ -299,7 +299,7 @@ int miiphy_reset (char *devname, unsigned char addr) debug ("PHY status read failed\n"); return (-1); } - if (miiphy_write (devname, addr, PHY_BMCR, reg | 0x8000) != 0) { + if (miiphy_write (devname, addr, PHY_BMCR, reg | PHY_BMCR_RESET) != 0) { debug ("PHY reset failed\n"); return (-1); } -- 1.6.3.3

3 2

[U-Boot] [PATCH] TQM85xx: enable partition support, sort commands
by Wolfgang Denk 18 Oct '09

18 Oct '09

Signed-off-by: Wolfgang Denk <wd(a)denx.de> --- include/configs/TQM85xx.h | 18 +++++++++++------- 1 files changed, 11 insertions(+), 7 deletions(-) diff --git a/include/configs/TQM85xx.h b/include/configs/TQM85xx.h index 1fbf4bf..d62576e 100644 --- a/include/configs/TQM85xx.h +++ b/include/configs/TQM85xx.h @@ -562,7 +562,6 @@ * Use NAND-FLash as JFFS2 device */ #define CONFIG_CMD_NAND -#define CONFIG_CMD_JFFS2 #define CONFIG_JFFS2_NAND 1 @@ -584,17 +583,19 @@ */ #include <config_cmd_default.h> -#define CONFIG_CMD_PING -#define CONFIG_CMD_I2C -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_NFS -#define CONFIG_CMD_SNTP #ifndef CONFIG_TQM8548_AG #define CONFIG_CMD_DATE #endif -#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_DHCP #define CONFIG_CMD_DTT +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_I2C +#define CONFIG_CMD_JFFS2 #define CONFIG_CMD_MII +#define CONFIG_CMD_MTDPARTS +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PING +#define CONFIG_CMD_SNTP #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI @@ -602,6 +603,9 @@ #undef CONFIG_WATCHDOG /* watchdog disabled */ +#define CONFIG_MAC_PARTITION +#define CONFIG_DOS_PARTITION + /* * Miscellaneous configurable options */ -- 1.6.0.6

2 14