October 2007 - U-Boot

[U-Boot-Users] bugs seized in rtl8139.c
by Lucas Jin 11 Oct '07

11 Oct '07

Hi all: Base version of U-Boot is 1.1.1 1. L482: rx_status = *(unsigned int*)KSEG1ADDR((rx_ring + ring_offs)); Change to: rx_status = *(unsigned int*)le_to_cpu(rx_ring + ring_offs); For "le_to_cpu", the following head files should be included: #include <linux/byteorder/big_endian.h> #include <linux/byteorder/generic.h> 2. L215: pci_read_config_dword(devno, PCI_BASE_ADDRESS_1, &iobase); Change to: pci_read_config_dword(devno, PCI_BASE_ADDRESS_0, &iobase); 3. L107, L108: #define bus_to_phys(a) pci_mem_to_phys((pci_dev_t)dev->priv, a) #define phys_to_bus(a) pci_phys_to_mem((pci_dev_t)dev->priv, a) change to: #define bus_to_phys(a) pci_io_to_phys((pci_dev_t)dev->priv, a) #define phys_to_bus(a) pci_phys_to_io((pci_dev_t)dev->priv, a) 4. L385: outl(phys_to_bus((int)rx_ring), ioaddr + RxBuf); change to: outl((int)rx_ring, ioaddr + RxBuf); 5. L425: outl(phys_to_bus((int)tx_buffer), ioaddr + TxAddr0 + cur_tx*4); change to: outl((int)tx_buffer, ioaddr + TxAddr0 + cur_tx*4); -------------- Lucas Jin

2 1

[U-Boot-Users] [PATCH 00/24] drivers: initial tree import for drivers reorganization
by Jean-Christophe PLAGNIOL-VILLARD 11 Oct '07

11 Oct '07

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj(a)jcrosoft.com> diff --git a/Makefile b/Makefile index 6410f08..57038e7 100644 --- a/Makefile +++ b/Makefile @@ -208,18 +208,35 @@ LIBS += disk/libdisk.a LIBS += rtc/librtc.a LIBS += dtt/libdtt.a LIBS += drivers/libdrivers.a +LIBS += drivers/ata/libata.a LIBS += drivers/bios_emulator/libatibiosemu.a +LIBS += drivers/block/libblock.a +LIBS += drivers/char/libchar.a +LIBS += drivers/eeprom/libeeprom.a +LIBS += drivers/hwmon/libhwmon.a +LIBS += drivers/i2c/libi2c.a +LIBS += drivers/ide/libide.a +LIBS += drivers/input/libinput.a +LIBS += drivers/leds/libleds.a +LIBS += drivers/misc/libmisc.a +LIBS += drivers/mtd/libmtd.a LIBS += drivers/nand/libnand.a LIBS += drivers/nand_legacy/libnand_legacy.a LIBS += drivers/net/libnet.a +LIBS += drivers/pci/libpci.a +LIBS += drivers/pcmcia/libpcmcia.a ifeq ($(CPU),mpc83xx) LIBS += drivers/qe/qe.a endif ifeq ($(CPU),mpc85xx) LIBS += drivers/qe/qe.a endif +LIBS += drivers/sata/libsata.a +LIBS += drivers/scsi/libscsi.a LIBS += drivers/serial/libserial.a LIBS += drivers/sk98lin/libsk98lin.a +LIBS += drivers/usb/libusb.a +LIBS += drivers/video/libvideo.a LIBS += post/libpost.a post/drivers/libpostdrivers.a LIBS += $(shell if [ -d post/lib_$(ARCH) ]; then echo \ "post/lib_$(ARCH)/libpost$(ARCH).a"; fi) diff --git a/drivers/nand_legacy/Makefile b/drivers/ata/Makefile similarity index 88% copy from drivers/nand_legacy/Makefile copy to drivers/ata/Makefile index 95314d8..f93d6cb 100644 --- a/drivers/nand_legacy/Makefile +++ b/drivers/ata/Makefile @@ -1,7 +1,7 @@ # -# (C) Copyright 2006 +# (C) Copyright 2007 # Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. -# +# Jean-Christophe PLAGNIOL-VILLARD, plagnioj(a)jcrosoft.com. # See file CREDITS for list of people who contributed to this # project. # @@ -23,16 +23,17 @@ include $(TOPDIR)/config.mk -LIB := $(obj)libnand_legacy.a +LIB := $(obj)libata.a -COBJS := nand_legacy.o +COBJS-y += +COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) all: $(LIB) -$(LIB): $(obj).depend $(OBJS) +$(LIB): $(obj).depend $(OBJS) $(AR) $(ARFLAGS) $@ $(OBJS) ######################################################################### diff --git a/drivers/bios_emulator/Makefile b/drivers/bios_emulator/Makefile index 90c64da..cb0a13e 100644 --- a/drivers/bios_emulator/Makefile +++ b/drivers/bios_emulator/Makefile @@ -6,14 +6,18 @@ X86DIR = x86emu $(shell mkdir -p $(obj)$(X86DIR)) -COBJS = atibios.o biosemu.o besys.o bios.o \ - $(X86DIR)/decode.o \ - $(X86DIR)/ops2.o \ - $(X86DIR)/ops.o \ - $(X86DIR)/prim_ops.o \ - $(X86DIR)/sys.o \ - $(X86DIR)/debug.o - +COBJS-y += atibios.o +COBJS-y += biosemu.o +COBJS-y += besys.o +COBJS-y += bios.o +COBJS-y += $(X86DIR)/decode.o +COBJS-y += $(X86DIR)/ops2.o +COBJS-y += $(X86DIR)/ops.o +COBJS-y += $(X86DIR)/prim_ops.o +COBJS-y += $(X86DIR)/sys.o +COBJS-y += $(X86DIR)/debug.o + +COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/drivers/nand_legacy/Makefile b/drivers/block/Makefile similarity index 87% copy from drivers/nand_legacy/Makefile copy to drivers/block/Makefile index 95314d8..254908a 100644 --- a/drivers/nand_legacy/Makefile +++ b/drivers/block/Makefile @@ -1,7 +1,7 @@ # -# (C) Copyright 2006 +# (C) Copyright 2007 # Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. -# +# Jean-Christophe PLAGNIOL-VILLARD, plagnioj(a)jcrosoft.com. # See file CREDITS for list of people who contributed to this # project. # @@ -23,16 +23,17 @@ include $(TOPDIR)/config.mk -LIB := $(obj)libnand_legacy.a +LIB := $(obj)libblock.a -COBJS := nand_legacy.o +COBJS-y += +COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) all: $(LIB) -$(LIB): $(obj).depend $(OBJS) +$(LIB): $(obj).depend $(OBJS) $(AR) $(ARFLAGS) $@ $(OBJS) ######################################################################### diff --git a/drivers/nand_legacy/Makefile b/drivers/char/Makefile similarity index 87% copy from drivers/nand_legacy/Makefile copy to drivers/char/Makefile index 95314d8..ed12090 100644 --- a/drivers/nand_legacy/Makefile +++ b/drivers/char/Makefile @@ -1,7 +1,7 @@ # -# (C) Copyright 2006 +# (C) Copyright 2007 # Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. -# +# Jean-Christophe PLAGNIOL-VILLARD, plagnioj(a)jcrosoft.com. # See file CREDITS for list of people who contributed to this # project. # @@ -23,16 +23,17 @@ include $(TOPDIR)/config.mk -LIB := $(obj)libnand_legacy.a +LIB := $(obj)libchar.a -COBJS := nand_legacy.o +COBJS-y += +COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) all: $(LIB) -$(LIB): $(obj).depend $(OBJS) +$(LIB): $(obj).depend $(OBJS) $(AR) $(ARFLAGS) $@ $(OBJS) ######################################################################### diff --git a/drivers/nand_legacy/Makefile b/drivers/eeprom/Makefile similarity index 87% copy from drivers/nand_legacy/Makefile copy to drivers/eeprom/Makefile index 95314d8..8188775 100644 --- a/drivers/nand_legacy/Makefile +++ b/drivers/eeprom/Makefile @@ -1,7 +1,7 @@ # -# (C) Copyright 2006 +# (C) Copyright 2007 # Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. -# +# Jean-Christophe PLAGNIOL-VILLARD, plagnioj(a)jcrosoft.com. # See file CREDITS for list of people who contributed to this # project. # @@ -23,16 +23,17 @@ include $(TOPDIR)/config.mk -LIB := $(obj)libnand_legacy.a +LIB := $(obj)libeeprom.a -COBJS := nand_legacy.o +COBJS-y += +COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) all: $(LIB) -$(LIB): $(obj).depend $(OBJS) +$(LIB): $(obj).depend $(OBJS) $(AR) $(ARFLAGS) $@ $(OBJS) ######################################################################### diff --git a/drivers/nand_legacy/Makefile b/drivers/hwmon/Makefile similarity index 87% copy from drivers/nand_legacy/Makefile copy to drivers/hwmon/Makefile index 95314d8..18f816c 100644 --- a/drivers/nand_legacy/Makefile +++ b/drivers/hwmon/Makefile @@ -1,7 +1,7 @@ # -# (C) Copyright 2006 +# (C) Copyright 2007 # Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. -# +# Jean-Christophe PLAGNIOL-VILLARD, plagnioj(a)jcrosoft.com. # See file CREDITS for list of people who contributed to this # project. # @@ -23,16 +23,17 @@ include $(TOPDIR)/config.mk -LIB := $(obj)libnand_legacy.a +LIB := $(obj)libhwmon.a -COBJS := nand_legacy.o +COBJS-y += +COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) all: $(LIB) -$(LIB): $(obj).depend $(OBJS) +$(LIB): $(obj).depend $(OBJS) $(AR) $(ARFLAGS) $@ $(OBJS) ######################################################################### diff --git a/drivers/nand_legacy/Makefile b/drivers/i2c/Makefile similarity index 88% copy from drivers/nand_legacy/Makefile copy to drivers/i2c/Makefile index 95314d8..7595572 100644 --- a/drivers/nand_legacy/Makefile +++ b/drivers/i2c/Makefile @@ -1,7 +1,7 @@ # -# (C) Copyright 2006 +# (C) Copyright 2007 # Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. -# +# Jean-Christophe PLAGNIOL-VILLARD, plagnioj(a)jcrosoft.com. # See file CREDITS for list of people who contributed to this # project. # @@ -23,16 +23,17 @@ include $(TOPDIR)/config.mk -LIB := $(obj)libnand_legacy.a +LIB := $(obj)libi2c.a -COBJS := nand_legacy.o +COBJS-y += +COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) all: $(LIB) -$(LIB): $(obj).depend $(OBJS) +$(LIB): $(obj).depend $(OBJS) $(AR) $(ARFLAGS) $@ $(OBJS) ######################################################################### diff --git a/drivers/nand_legacy/Makefile b/drivers/ide/Makefile similarity index 88% copy from drivers/nand_legacy/Makefile copy to drivers/ide/Makefile index 95314d8..513259d 100644 --- a/drivers/nand_legacy/Makefile +++ b/drivers/ide/Makefile @@ -1,7 +1,7 @@ # -# (C) Copyright 2006 +# (C) Copyright 2007 # Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. -# +# Jean-Christophe PLAGNIOL-VILLARD, plagnioj(a)jcrosoft.com. # See file CREDITS for list of people who contributed to this # project. # @@ -23,16 +23,17 @@ include $(TOPDIR)/config.mk -LIB := $(obj)libnand_legacy.a +LIB := $(obj)libide.a -COBJS := nand_legacy.o +COBJS-y += +COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) all: $(LIB) -$(LIB): $(obj).depend $(OBJS) +$(LIB): $(obj).depend $(OBJS) $(AR) $(ARFLAGS) $@ $(OBJS) ######################################################################### diff --git a/drivers/nand_legacy/Makefile b/drivers/input/Makefile similarity index 87% copy from drivers/nand_legacy/Makefile copy to drivers/input/Makefile index 95314d8..60371b3 100644 --- a/drivers/nand_legacy/Makefile +++ b/drivers/input/Makefile @@ -1,7 +1,7 @@ # -# (C) Copyright 2006 +# (C) Copyright 2007 # Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. -# +# Jean-Christophe PLAGNIOL-VILLARD, plagnioj(a)jcrosoft.com. # See file CREDITS for list of people who contributed to this # project. # @@ -23,16 +23,17 @@ include $(TOPDIR)/config.mk -LIB := $(obj)libnand_legacy.a +LIB := $(obj)libinput.a -COBJS := nand_legacy.o +COBJS-y += +COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) all: $(LIB) -$(LIB): $(obj).depend $(OBJS) +$(LIB): $(obj).depend $(OBJS) $(AR) $(ARFLAGS) $@ $(OBJS) ######################################################################### diff --git a/drivers/nand_legacy/Makefile b/drivers/leds/Makefile similarity index 87% copy from drivers/nand_legacy/Makefile copy to drivers/leds/Makefile index 95314d8..0bbfb56 100644 --- a/drivers/nand_legacy/Makefile +++ b/drivers/leds/Makefile @@ -1,7 +1,7 @@ # -# (C) Copyright 2006 +# (C) Copyright 2007 # Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. -# +# Jean-Christophe PLAGNIOL-VILLARD, plagnioj(a)jcrosoft.com. # See file CREDITS for list of people who contributed to this # project. # @@ -23,16 +23,17 @@ include $(TOPDIR)/config.mk -LIB := $(obj)libnand_legacy.a +LIB := $(obj)libleds.a -COBJS := nand_legacy.o +COBJS-y += +COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) all: $(LIB) -$(LIB): $(obj).depend $(OBJS) +$(LIB): $(obj).depend $(OBJS) $(AR) $(ARFLAGS) $@ $(OBJS) ######################################################################### diff --git a/drivers/nand_legacy/Makefile b/drivers/misc/Makefile similarity index 87% copy from drivers/nand_legacy/Makefile copy to drivers/misc/Makefile index 95314d8..9eb8b50 100644 --- a/drivers/nand_legacy/Makefile +++ b/drivers/misc/Makefile @@ -1,7 +1,7 @@ # -# (C) Copyright 2006 +# (C) Copyright 2007 # Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. -# +# Jean-Christophe PLAGNIOL-VILLARD, plagnioj(a)jcrosoft.com. # See file CREDITS for list of people who contributed to this # project. # @@ -23,16 +23,17 @@ include $(TOPDIR)/config.mk -LIB := $(obj)libnand_legacy.a +LIB := $(obj)libmisc.a -COBJS := nand_legacy.o +COBJS-y += +COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) all: $(LIB) -$(LIB): $(obj).depend $(OBJS) +$(LIB): $(obj).depend $(OBJS) $(AR) $(ARFLAGS) $@ $(OBJS) ######################################################################### diff --git a/drivers/nand_legacy/Makefile b/drivers/mtd/Makefile similarity index 88% copy from drivers/nand_legacy/Makefile copy to drivers/mtd/Makefile index 95314d8..c0f6a06 100644 --- a/drivers/nand_legacy/Makefile +++ b/drivers/mtd/Makefile @@ -1,7 +1,7 @@ # -# (C) Copyright 2006 +# (C) Copyright 2007 # Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. -# +# Jean-Christophe PLAGNIOL-VILLARD, plagnioj(a)jcrosoft.com. # See file CREDITS for list of people who contributed to this # project. # @@ -23,16 +23,17 @@ include $(TOPDIR)/config.mk -LIB := $(obj)libnand_legacy.a +LIB := $(obj)libmtd.a -COBJS := nand_legacy.o +COBJS-y += +COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) all: $(LIB) -$(LIB): $(obj).depend $(OBJS) +$(LIB): $(obj).depend $(OBJS) $(AR) $(ARFLAGS) $@ $(OBJS) ######################################################################### diff --git a/drivers/nand_legacy/Makefile b/drivers/nand_legacy/Makefile index 95314d8..6f1283b 100644 --- a/drivers/nand_legacy/Makefile +++ b/drivers/nand_legacy/Makefile @@ -25,8 +25,9 @@ include $(TOPDIR)/config.mk LIB := $(obj)libnand_legacy.a -COBJS := nand_legacy.o +COBJS-y += nand_legacy.o +COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 37d69b9..7d115fe 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -25,8 +25,9 @@ include $(TOPDIR)/config.mk LIB := $(obj)libnet.a -COBJS := mcffec.o +COBJS-y += mcffec.o +COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/drivers/nand_legacy/Makefile b/drivers/pci/Makefile similarity index 88% copy from drivers/nand_legacy/Makefile copy to drivers/pci/Makefile index 95314d8..73af31f 100644 --- a/drivers/nand_legacy/Makefile +++ b/drivers/pci/Makefile @@ -1,7 +1,7 @@ # -# (C) Copyright 2006 +# (C) Copyright 2007 # Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. -# +# Jean-Christophe PLAGNIOL-VILLARD, plagnioj(a)jcrosoft.com. # See file CREDITS for list of people who contributed to this # project. # @@ -23,16 +23,17 @@ include $(TOPDIR)/config.mk -LIB := $(obj)libnand_legacy.a +LIB := $(obj)libpci.a -COBJS := nand_legacy.o +COBJS-y += +COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) all: $(LIB) -$(LIB): $(obj).depend $(OBJS) +$(LIB): $(obj).depend $(OBJS) $(AR) $(ARFLAGS) $@ $(OBJS) ######################################################################### diff --git a/drivers/nand_legacy/Makefile b/drivers/pcmcia/Makefile similarity index 87% copy from drivers/nand_legacy/Makefile copy to drivers/pcmcia/Makefile index 95314d8..39f105a 100644 --- a/drivers/nand_legacy/Makefile +++ b/drivers/pcmcia/Makefile @@ -1,7 +1,7 @@ # -# (C) Copyright 2006 +# (C) Copyright 2007 # Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. -# +# Jean-Christophe PLAGNIOL-VILLARD, plagnioj(a)jcrosoft.com. # See file CREDITS for list of people who contributed to this # project. # @@ -23,16 +23,17 @@ include $(TOPDIR)/config.mk -LIB := $(obj)libnand_legacy.a +LIB := $(obj)libpcmcia.a -COBJS := nand_legacy.o +COBJS-y += +COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) all: $(LIB) -$(LIB): $(obj).depend $(OBJS) +$(LIB): $(obj).depend $(OBJS) $(AR) $(ARFLAGS) $@ $(OBJS) ######################################################################### diff --git a/drivers/qe/Makefile b/drivers/qe/Makefile index 4844181..900f64d 100644 --- a/drivers/qe/Makefile +++ b/drivers/qe/Makefile @@ -24,8 +24,12 @@ include $(TOPDIR)/config.mk LIB := $(obj)qe.a -COBJS := qe.o uccf.o uec.o uec_phy.o +COBJS-y += qe.o +COBJS-y += uccf.o +COBJS-y += uec.o +COBJS-y += uec_phy.o +COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/drivers/nand_legacy/Makefile b/drivers/sata/Makefile similarity index 87% copy from drivers/nand_legacy/Makefile copy to drivers/sata/Makefile index 95314d8..6fab412 100644 --- a/drivers/nand_legacy/Makefile +++ b/drivers/sata/Makefile @@ -1,7 +1,7 @@ # -# (C) Copyright 2006 +# (C) Copyright 2007 # Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. -# +# Jean-Christophe PLAGNIOL-VILLARD, plagnioj(a)jcrosoft.com. # See file CREDITS for list of people who contributed to this # project. # @@ -23,16 +23,17 @@ include $(TOPDIR)/config.mk -LIB := $(obj)libnand_legacy.a +LIB := $(obj)libsata.a -COBJS := nand_legacy.o +COBJS-y += +COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) all: $(LIB) -$(LIB): $(obj).depend $(OBJS) +$(LIB): $(obj).depend $(OBJS) $(AR) $(ARFLAGS) $@ $(OBJS) ######################################################################### diff --git a/drivers/nand_legacy/Makefile b/drivers/scsi/Makefile similarity index 87% copy from drivers/nand_legacy/Makefile copy to drivers/scsi/Makefile index 95314d8..b6db6d3 100644 --- a/drivers/nand_legacy/Makefile +++ b/drivers/scsi/Makefile @@ -1,7 +1,7 @@ # -# (C) Copyright 2006 +# (C) Copyright 2007 # Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. -# +# Jean-Christophe PLAGNIOL-VILLARD, plagnioj(a)jcrosoft.com. # See file CREDITS for list of people who contributed to this # project. # @@ -23,16 +23,17 @@ include $(TOPDIR)/config.mk -LIB := $(obj)libnand_legacy.a +LIB := $(obj)libscsi.a -COBJS := nand_legacy.o +COBJS-y += +COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) all: $(LIB) -$(LIB): $(obj).depend $(OBJS) +$(LIB): $(obj).depend $(OBJS) $(AR) $(ARFLAGS) $@ $(OBJS) ######################################################################### diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index 93c68dd..fe3ade3 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -25,8 +25,9 @@ include $(TOPDIR)/config.mk LIB := $(obj)libserial.a -COBJS := mcfuart.o +COBJS-y += mcfuart.o +COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/drivers/nand_legacy/Makefile b/drivers/usb/Makefile similarity index 88% copy from drivers/nand_legacy/Makefile copy to drivers/usb/Makefile index 95314d8..e151fe5 100644 --- a/drivers/nand_legacy/Makefile +++ b/drivers/usb/Makefile @@ -1,7 +1,7 @@ # -# (C) Copyright 2006 +# (C) Copyright 2007 # Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. -# +# Jean-Christophe PLAGNIOL-VILLARD, plagnioj(a)jcrosoft.com. # See file CREDITS for list of people who contributed to this # project. # @@ -23,16 +23,17 @@ include $(TOPDIR)/config.mk -LIB := $(obj)libnand_legacy.a +LIB := $(obj)libusb.a -COBJS := nand_legacy.o +COBJS-y += +COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) all: $(LIB) -$(LIB): $(obj).depend $(OBJS) +$(LIB): $(obj).depend $(OBJS) $(AR) $(ARFLAGS) $@ $(OBJS) ######################################################################### diff --git a/drivers/nand_legacy/Makefile b/drivers/video/Makefile similarity index 87% copy from drivers/nand_legacy/Makefile copy to drivers/video/Makefile index 95314d8..f26ead9 100644 --- a/drivers/nand_legacy/Makefile +++ b/drivers/video/Makefile @@ -1,7 +1,7 @@ # -# (C) Copyright 2006 +# (C) Copyright 2007 # Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. -# +# Jean-Christophe PLAGNIOL-VILLARD, plagnioj(a)jcrosoft.com. # See file CREDITS for list of people who contributed to this # project. # @@ -23,16 +23,17 @@ include $(TOPDIR)/config.mk -LIB := $(obj)libnand_legacy.a +LIB := $(obj)libvideo.a -COBJS := nand_legacy.o +COBJS-y += +COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) all: $(LIB) -$(LIB): $(obj).depend $(OBJS) +$(LIB): $(obj).depend $(OBJS) $(AR) $(ARFLAGS) $@ $(OBJS) ######################################################################### -- 1.5.3.2

1 24

[U-Boot-Users] watchdog timer implementaion on BCM 5655
by Shakti Shrivastava 11 Oct '07

11 Oct '07

Hi, I'm using uboot 1.1.6 on BCM 5655 and MPC 8245. after compiling Uboot only .obj file is created for watcgdog.c but .bin file is not created. how to test if watchdog timer is working or not. do watchdog require some modification to support BCM 5655 board. Regards Shakti

1 0

[U-Boot-Users] MIPS question
by Vlad Lungu 11 Oct '07

11 Oct '07

For those who know a little about U-Boot on MIPS: in include/asm-mips/addrspace.h line 52, there is a #define UNCACHED_SDRAM(a) PHYSADDR(a) The question is: shouldn't we use KSEG1ADDR() instead of PHYSADDR()? If not, this means we have to actually map KUSEG ? Vlad

2 3

Re: [U-Boot-Users] MIPS question
by Tim Braun 11 Oct '07

11 Oct '07

> From: Vlad Lungu <vlad(a)comsys.ro> > Shinya Kuribayashi wrote: > > Vlad Lungu wrote: > > > >> in include/asm-mips/addrspace.h line 52, there is a > >> > >> #define UNCACHED_SDRAM(a) PHYSADDR(a) > >> > >> The question is: shouldn't we use KSEG1ADDR() instead of > PHYSADDR()? > >> > > > > I think we should. At least my target boards need that change. > The RAM might be mapped at 0 too on some boards, that's why > it works with PHYSADDR(). ... My code base is unchanged from U-Boot 1.1.1 : #if defined(CONFIG_AU1X00) || defined(CONFIG_TB0229) /* We use a 36 bit physical address map here and cannot access physical memory directly from core */ #define UNCACHED_SDRAM(a) (((unsigned long)(a)) | 0x20000000) #else /* !CONFIG_AU1X00 */ #define UNCACHED_SDRAM(a) PHYSADDR(a) #endif /* CONFIG_AU1X00 */ Since the name is uncached, you want an uncached address, so I think we want #define UNCACHED_SDRAM(a) KSEG1ADDR(a) In the Au1x00 based systems (like ours), the SDRAM is generally mapped to physical address 0x80000000, so it works out as valid KSEG0 / KSEG1 addresses. Tim Braun, Sr. Des. Eng. LibreStream Technologies 200-55 Rothwell Rd, Winnipeg, R3P 2M5 http://www.librestream.com

1 0

[U-Boot-Users] [PATCH] Dirvers Reorganization Patch for Grant Likely Kconfig Patch
by Jean-Christophe PLAGNIOL-VILLARD 11 Oct '07

11 Oct '07

Hi, The patch for Grant Likely Kconfig Patch. Best Regards Jean-Christophe PLAGNIOL-VILLARD

2 2

[U-Boot-Users] driver for Micrel's KS884X Ethernet controller
by Yasothabalan Ramaswamy-TLS,Chennai 11 Oct '07

11 Oct '07

Hi all, I am using Micrel's KS884x Ethernet controller in my board (MPC5200B processor) Where can I find suitable driver for Micrel's KS884X Ethernet controller which is supported by U-Boot 1.2.0 Thanks in Advance. Regards, Yasotha Balan R DISCLAIMER: ----------------------------------------------------------------------------------------------------------------------- The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only. It shall not attach any liability on the originator or HCL or its affiliates. Any views or opinions presented in this email are solely those of the author and may not necessarily reflect the opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of the author of this e-mail is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately. Before opening any mail and attachments please check them for viruses and defect. -----------------------------------------------------------------------------------------------------------------------

2 1

[U-Boot-Users] U-boot resets GPIO port registers on MPC8xx
by melinda develey 11 Oct '07

11 Oct '07

Hi all, I tried to configure pddat, pddir with the mw command on the u-boot prompt. Afterward I issued a reset command and when the u-boot restarts these value are changed to default values. Anyone knows which U-boot instruction causes this reset?. Bye, Melinda. --------------------------------- Catch up on fall's hot new shows on Yahoo! TV. Watch previews, get listings, and more!

2 1

[U-Boot-Users] (no subject)
by DI BACCO ANTONIO - technolabs 11 Oct '07

11 Oct '07

mw.w f0000970 0001 mw.w f0000976 0401 protect off F8000000 F803FFFF run dl_boot

1 0

[U-Boot-Users] How to run "itest" command
by Vaibhav Hiremath 11 Oct '07

11 Oct '07

Hi How "itest"command return the result on to serial console, I am issueing following command on U-Boot prompt - => itest.b 3 == 5 It returns without any output. I am using U-Boot-1.2.0 and my command defination looks like - #define CONFIG_COMMANDS ((CONFIG_CMD_DFL & ~CFG_CMD_NET) | \ CFG_CMD_MEMORY | \ CFG_CMD_ENV | \ CFG_CMD_FLASH | \ CFG_CMD_MISC | \ CFG_CMD_BSP | \ CFG_CMD_ELF | \ CFG_CMD_ASKENV | \ CFG_CMD_REGINFO | \ CFG_CMD_SDRAM | \ CFG_CMD_CACHE | \ CFG_CMD_NAND | \ CFG_CMD_ITEST | \ CFG_CMD_JFFS2 ) Can anybody tell me the exact procedure to get the result on U-boot prompt from "itest" command? Thanks in advance. Thanks, Vaibhav

2 3