October 2007 - U-Boot

[U-Boot-Users] [PATCH] TQM5200S: fix commands for STK52xx base board because of missing SM501 grafic controller
by Martin Krause 24 Oct '07

24 Oct '07

Some commands for the STK52xx base board try to access the SM501 grafic controller. But the TQM5200S has no grafic controller (only the TQM5200 and the TQM5200B have). This patch deactivates the commands accessing the SM501 for the TQM5200S. Signed-off-by: Martin Krause <martin.krause(a)tqs.de> --- If I receive no negative comments to this patch, I will pick it to the u-boot-tq-group repository and send a pull request. Best regards, Martin board/tqm5200/cmd_stk52xx.c | 17 ++++++++++------- board/tqm5200/tqm5200.c | 2 ++ 2 files changed, 12 insertions(+), 7 deletions(-) diff --git a/board/tqm5200/cmd_stk52xx.c b/board/tqm5200/cmd_stk52xx.c index b746679..27a6c41 100644 --- a/board/tqm5200/cmd_stk52xx.c +++ b/board/tqm5200/cmd_stk52xx.c @@ -561,7 +561,7 @@ void led_init(void) gpt->gpt6.emsr |= 0x00000024; gpt->gpt7.emsr |= 0x00000024; - +#ifndef CONFIG_TQM5200S /* enable SM501 GPIO control (in both power modes) */ *(vu_long *) (SM501_MMIO_BASE+SM501_POWER_MODE0_GATE) |= POWER_MODE_GATE_GPIO_PWM_I2C; @@ -574,6 +574,7 @@ void led_init(void) /* configure SM501 gpio pins 48-51 as output */ *(vu_long *) (SM501_MMIO_BASE+SM501_GPIO_DATA_DIR_HIGH) |= (0xF << 16); +#endif /* !CONFIG_TQM5200S */ } /* @@ -650,7 +651,7 @@ int do_led(char *argv[]) gpt->gpt7.emsr &= ~(1 << 4); } break; - +#ifndef CONFIG_TQM5200S case 24: if (strcmp (argv[3], "on") == 0) { *(vu_long *) (SM501_MMIO_BASE+SM501_GPIO_DATA_LOW) |= @@ -730,7 +731,7 @@ int do_led(char *argv[]) ~(0x1 << 19); } break; - +#endif /* !CONFIG_TQM5200S */ default: printf ("%s: invalid led number %s\n", __FUNCTION__, argv[2]); return 1; @@ -1110,7 +1111,7 @@ int do_rs232(char *argv[]) return error_status; } -#ifndef CONFIG_FO300 +#if !defined(CONFIG_FO300) && !defined(CONFIG_TQM5200S) static void sm501_backlight (unsigned int state) { if (state == BL_ON) { @@ -1120,7 +1121,7 @@ static void sm501_backlight (unsigned int state) *(vu_long *)(SM501_MMIO_BASE+SM501_PANEL_DISPLAY_CONTROL) &= ~((1 << 26) | (1 << 27)); } -#endif +#endif /* !CONFIG_FO300 & !CONFIG_TQM5200S */ int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { @@ -1160,7 +1161,7 @@ int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) else printf ("Error\n"); return rcode; -#ifndef CONFIG_FO300 +#if !defined(CONFIG_FO300) && !defined(CONFIG_TQM5200S) } else if (strncmp (argv[1], "backlight", 4) == 0) { if (strncmp (argv[2], "on", 2) == 0) { sm501_backlight (BL_ON); @@ -1170,7 +1171,7 @@ int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) sm501_backlight (BL_OFF); return 0; } -#endif +#endif /* !CONFIG_FO300 & !CONFIG_TQM5200S */ } break; @@ -1228,8 +1229,10 @@ U_BOOT_CMD( " - loopback plug for X83 required\n" "fkt rs232 number\n" " - loopback plug(s) for X2 required\n" +#ifndef CONFIG_TQM5200S "fkt backlight on/off\n" " - switch backlight on or off\n" +#endif /* !CONFIG_TQM5200S */ ); #elif defined(CONFIG_FO300) U_BOOT_CMD( diff --git a/board/tqm5200/tqm5200.c b/board/tqm5200/tqm5200.c index 29d6f00..d10cb59 100644 --- a/board/tqm5200/tqm5200.c +++ b/board/tqm5200/tqm5200.c @@ -543,6 +543,7 @@ int last_stage_init (void) __asm__ volatile ("sync"); } +#ifndef CONFIG_TQM5200S /* The TQM5200S has no SM501 grafic controller */ /* * Check for Grafic Controller */ @@ -586,6 +587,7 @@ int last_stage_init (void) #endif return 0; +#endif /* !CONFIG_TQM5200S */ } #ifdef CONFIG_VIDEO_SM501

3 2

[U-Boot-Users] [PATCH] NE2000 working again
by Vlad Lungu 24 Oct '07

24 Oct '07

Fixed typo in ne2000.h, thinko re n2k_inb() usage, don't try to do anything in eth_stop() if eth_init() was not called. Simplified RX path in order to avoid timeouts on really really fast NE2000 cards (read: qemu with internal tftp), NetLoop() is clever enough to cope with 1 packet per eth_rx(). Signed-off-by: Vlad Lungu <vlad(a)comsys.ro> --- drivers/ne2000.c | 36 +++++++++++++----------------------- drivers/ne2000.h | 2 +- 2 files changed, 14 insertions(+), 24 deletions(-) diff --git a/drivers/ne2000.c b/drivers/ne2000.c index b7ed876..0bfe74e 100644 --- a/drivers/ne2000.c +++ b/drivers/ne2000.c @@ -755,7 +755,7 @@ static void pcnet_reset_8390(void) #endif n2k_outb(E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD); - n2k_outb(n2k_inb(nic_base + PCNET_RESET), PCNET_RESET); + n2k_outb(n2k_inb(PCNET_RESET), PCNET_RESET); for (i = 0; i < 100; i++) { if ((r = (n2k_inb(EN0_ISR) & ENISR_RESET)) != 0) @@ -833,6 +833,7 @@ static int plen[NB]; static int nrx = 0; static int pkey = -1; +static int initialized=0; void uboot_push_packet_len(int len) { PRINTK("pushed len = %d, nrx = %d\n", len, nrx); @@ -846,7 +847,12 @@ void uboot_push_packet_len(int len) { } plen[nrx] = len; dp83902a_recv(&pbuf[nrx*2000], len); +/*Just pass it to the upper layer*/ + NetReceive(&pbuf[nrx*2000], plen[nrx]); +/*eth_rx() was gutted, so this is not needed anymore*/ +#if 0 nrx++; +#endif } void uboot_push_tx_done(int key, int val) { @@ -903,37 +909,21 @@ int eth_init(bd_t *bd) { if (dp83902a_init() == false) return -1; dp83902a_start(dev_addr); + initialized=1; return 0; } void eth_halt() { PRINTK("### eth_halt\n"); - - dp83902a_stop(); + if(initialized) + dp83902a_stop(); + initialized=0; } int eth_rx() { - int j, tmo; - - PRINTK("### eth_rx\n"); - - tmo = get_timer (0) + TOUT * CFG_HZ; - while(1) { - dp83902a_poll(); - if (nrx > 0) { - for(j=0; j<nrx; j++) { - NetReceive(&pbuf[j*2000], plen[j]); - } - nrx = 0; - return 1; - } - if (get_timer (0) >= tmo) { - printf("timeout during rx\n"); - return 0; - } - } - return 0; +dp83902a_poll(); +return 1; } int eth_send(volatile void *packet, int length) { diff --git a/drivers/ne2000.h b/drivers/ne2000.h index 2955533..c13d9f0 100644 --- a/drivers/ne2000.h +++ b/drivers/ne2000.h @@ -42,7 +42,7 @@ are GPL, so this is, of course, GPL. this file might be covered by the GNU General Public License. Alternative licenses for eCos may be arranged by contacting Red Hat, Inc. - at http://sources.redhat.com/ecos/ecos-license/ */ + at http://sources.redhat.com/ecos/ecos-license/ ------------------------------------------- ####ECOSGPLCOPYRIGHTEND#### ####BSDCOPYRIGHTBEGIN#### -- 1.5.2.2

2 3

[U-Boot-Users] [PATCH] Mips: Fix string functions differ prototype declaration
by Jean-Christophe PLAGNIOL-VILLARD 24 Oct '07

24 Oct '07

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj(a)jcrosoft.com> diff --git a/include/asm-mips/string.h b/include/asm-mips/string.h index c42ad82..579a591 100644 --- a/include/asm-mips/string.h +++ b/include/asm-mips/string.h @@ -19,21 +19,21 @@ extern char *strcpy(char *__dest, __const__ char *__src); #undef __HAVE_ARCH_STRNCPY -extern char *strncpy(char *__dest, __const__ char *__src, size_t __n); +extern char *strncpy(char *__dest, __const__ char *__src, __kernel_size_t __n); #undef __HAVE_ARCH_STRCMP extern int strcmp(__const__ char *__cs, __const__ char *__ct); #undef __HAVE_ARCH_STRNCMP -extern int strncmp(__const__ char *__cs, __const__ char *__ct, size_t __count); +extern int strncmp(__const__ char *__cs, __const__ char *__ct, __kernel_size_t __count); #undef __HAVE_ARCH_MEMSET -extern void *memset(void *__s, int __c, size_t __count); +extern void *memset(void *__s, int __c, __kernel_size_t __count); #undef __HAVE_ARCH_MEMCPY -extern void *memcpy(void *__to, __const__ void *__from, size_t __n); +extern void *memcpy(void *__to, __const__ void *__from, __kernel_size_t __n); #undef __HAVE_ARCH_MEMMOVE -extern void *memmove(void *__dest, __const__ void *__src, size_t __n); +extern void *memmove(void *__dest, __const__ void *__src, __kernel_size_t __n); #endif /* _ASM_STRING_H */ -- 1.5.3.2

2 1

[U-Boot-Users] [PATCH] fix warning: no return statement in function returning non-void
by Jean-Christophe PLAGNIOL-VILLARD 24 Oct '07

24 Oct '07

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj(a)jcrosoft.com> diff --git a/cpu/arm920t/at91rm9200/usb.c b/cpu/arm920t/at91rm9200/usb.c index 366262e..c121de6 100644 --- a/cpu/arm920t/at91rm9200/usb.c +++ b/cpu/arm920t/at91rm9200/usb.c @@ -28,7 +28,7 @@ #include <asm/arch/hardware.h> -int usb_cpu_init() +int usb_cpu_init(void) { /* Enable USB host clock. */ *AT91C_PMC_SCER = AT91C_PMC_UHP; /* 48MHz clock enabled for UHP */ @@ -36,7 +36,7 @@ int usb_cpu_init() return 0; } -int usb_cpu_stop() +int usb_cpu_stop(void) { /* Initialization failed */ *AT91C_PMC_PCDR = 1 << AT91C_ID_UHP; /* Peripheral Clock Disable Register */ @@ -44,9 +44,9 @@ int usb_cpu_stop() return 0; } -int usb_cpu_init_fail() +int usb_cpu_init_fail(void) { - usb_cpu_stop(); + return usb_cpu_stop(); } # endif /* CONFIG_AT91RM9200 */ diff --git a/cpu/pxa/usb.c b/cpu/pxa/usb.c index 3c11d4d..d2812a4 100644 --- a/cpu/pxa/usb.c +++ b/cpu/pxa/usb.c @@ -28,7 +28,7 @@ #include <asm/arch/pxa-regs.h> -int usb_cpu_init() +int usb_cpu_init(void) { #if defined(CONFIG_CPU_MONAHANS) /* Enable USB host clock. */ @@ -65,7 +65,7 @@ int usb_cpu_init() return 0; } -int usb_cpu_stop() +int usb_cpu_stop(void) { UHCHR |= UHCHR_FHR; udelay(11); @@ -86,7 +86,7 @@ int usb_cpu_stop() return 0; } -int usb_cpu_init_fail() +int usb_cpu_init_fail(void) { return 0; } -- 1.5.3.2

2 1

[U-Boot-Users] [PATCH] delta: Fix OHCI_REGS_BASE undeclared and wait_ms implicit declaration
by Jean-Christophe PLAGNIOL-VILLARD 24 Oct '07

24 Oct '07

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj(a)jcrosoft.com> diff --git a/cpu/pxa/usb.c b/cpu/pxa/usb.c index d2812a4..72b7dfa 100644 --- a/cpu/pxa/usb.c +++ b/cpu/pxa/usb.c @@ -27,6 +27,7 @@ # if defined(CONFIG_CPU_MONAHANS) || defined(CONFIG_PXA27X) #include <asm/arch/pxa-regs.h> +#include <usb.h> int usb_cpu_init(void) { diff --git a/include/configs/delta.h b/include/configs/delta.h index 09667ed..14fde1a 100644 --- a/include/configs/delta.h +++ b/include/configs/delta.h @@ -123,6 +123,8 @@ #define CONFIG_USB_STORAGE 1 #define CONFIG_DOS_PARTITION 1 +#include <asm/arch/pxa-regs.h> /* for OHCI_REGS_BASE */ + #undef CFG_USB_OHCI_BOARD_INIT #define CFG_USB_OHCI_CPU_INIT 1 #define CFG_USB_OHCI_REGS_BASE OHCI_REGS_BASE -- 1.5.3.2

2 1

[U-Boot-Users] [PATCH] fsl_pci_init enable COMMAND_MEMORY if inbound window
by Ed Swarthout 24 Oct '07

24 Oct '07

Patch 16e23c3f removed PCSRBAR allocation. But passing zero windows to pciauto_setup_device has the side effect of not getting COMMAND_MEMORY set. Signed-off-by: Ed Swarthout <Ed.Swarthout(a)freescale.com> --- This fixes the PCI ethernet card problem that use dma for the mpc8544ds and mpc8610hpcd boards. drivers/fsl_pci_init.c | 8 ++++++++ 1 files changed, 8 insertions(+), 0 deletions(-) diff --git a/drivers/fsl_pci_init.c b/drivers/fsl_pci_init.c index 6394234..e0c3bed 100644 --- a/drivers/fsl_pci_init.c +++ b/drivers/fsl_pci_init.c @@ -54,6 +54,7 @@ fsl_pci_init(struct pci_controller *hose) u8 temp8; int r; int bridge; + int inbound = 0; volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) hose->cfg_addr; pci_dev_t dev = PCI_BDF(busno,0,0); @@ -74,6 +75,7 @@ fsl_pci_init(struct pci_controller *hose) PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP | (__ilog2(hose->regions[r].size) - 1); pi++; + inbound = hose->regions[r].size > 0; } else { /* Outbound */ po->powbar = (hose->regions[r].phys_start >> 12) & 0x000fffff; po->potar = (hose->regions[r].bus_start >> 12) & 0x000fffff; @@ -138,6 +140,12 @@ fsl_pci_init(struct pci_controller *hose) pciauto_setup_device(hose, dev, 0, hose->pci_mem, hose->pci_prefetch, hose->pci_io); + if (inbound) { + pci_hose_read_config_word(hose, dev, PCI_COMMAND, &temp16); + pci_hose_write_config_word(hose, dev, PCI_COMMAND, + temp16 | PCI_COMMAND_MEMORY); + } + #ifndef CONFIG_PCI_NOSCAN printf (" Scanning PCI bus %02x\n", hose->current_busno); hose->last_busno = pci_hose_scan_bus(hose,hose->current_busno); -- 1.5.3.4.225.gbee42

3 2

[U-Boot-Users] [PATCH] Use config_cmd_default.h instead of config_cmd_all.h
by Jean-Christophe PLAGNIOL-VILLARD 24 Oct '07

24 Oct '07

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj(a)jcrosoft.com> diff --git a/include/configs/ADNPESC1.h b/include/configs/ADNPESC1.h index 77938b1..c45c395 100644 --- a/include/configs/ADNPESC1.h +++ b/include/configs/ADNPESC1.h @@ -574,38 +574,30 @@ /* * Command line configuration. */ -#include <config_cmd_all.h> - -#undef CONFIG_CMD_ASKENV -#undef CONFIG_CMD_BEDBUG -#undef CONFIG_CMD_BMP -#undef CONFIG_CMD_CACHE -#undef CONFIG_CMD_DOC -#undef CONFIG_CMD_DTT -#undef CONFIG_CMD_EEPROM -#undef CONFIG_CMD_ELF -#undef CONFIG_CMD_FAT -#undef CONFIG_CMD_FDC -#undef CONFIG_CMD_FDOS -#undef CONFIG_CMD_HWFLOW -#undef CONFIG_CMD_IDE -#undef CONFIG_CMD_I2C -#undef CONFIG_CMD_JFFS2 -#undef CONFIG_CMD_KGDB -#undef CONFIG_CMD_NAND +#include <config_cmd_default.h> + +#define CONFIG_CMD_BSP +#define CONFIG_CMD_CDP +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_DISPLAY +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_IMMAP +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_PING +#define CONFIG_CMD_PORTIO +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_REISER +#define CONFIG_CMD_SAVES +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_SNTP + #undef CONFIG_CMD_NFS -#undef CONFIG_CMD_MMC -#undef CONFIG_CMD_MII -#undef CONFIG_CMD_PCI -#undef CONFIG_CMD_PCMCIA -#undef CONFIG_CMD_SCSI -#undef CONFIG_CMD_VFD -#undef CONFIG_CMD_USB #undef CONFIG_CMD_XIMG -#if (CFG_NIOS_CPU_SPI_NUMS != 1) -#undef CONFIG_CMD_SPI -#undef CONFIG_CMD_DATE +#if (CFG_NIOS_CPU_SPI_NUMS == 1) +#define CONFIG_CMD_DATE +#define CONFIG_CMD_SPI #endif /*------------------------------------------------------------------------ diff --git a/include/configs/DK1C20.h b/include/configs/DK1C20.h index 0ddf0e3..29c21a5 100644 --- a/include/configs/DK1C20.h +++ b/include/configs/DK1C20.h @@ -459,38 +459,27 @@ /* * Command line configuration. */ -#include <config_cmd_all.h> - -#undef CONFIG_CMD_ASKENV -#undef CONFIG_CMD_BEDBUG -#undef CONFIG_CMD_BMP -#undef CONFIG_CMD_BSP -#undef CONFIG_CMD_CACHE -#undef CONFIG_CMD_DATE -#undef CONFIG_CMD_DOC -#undef CONFIG_CMD_DTT -#undef CONFIG_CMD_EEPROM -#undef CONFIG_CMD_ELF -#undef CONFIG_CMD_FDC -#undef CONFIG_CMD_FDOS -#undef CONFIG_CMD_HWFLOW -#undef CONFIG_CMD_I2C -#undef CONFIG_CMD_JFFS2 -#undef CONFIG_CMD_KGDB -#undef CONFIG_CMD_NAND +#include <config_cmd_default.h> + +#define CONFIG_CMD_CDP +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_DISPLAY +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_IDE +#define CONFIG_CMD_IMMAP +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_PING +#define CONFIG_CMD_PORTIO +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SAVES +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_SNTP + #undef CONFIG_CMD_NFS -#undef CONFIG_CMD_MMC -#undef CONFIG_CMD_MII -#undef CONFIG_CMD_PCI -#undef CONFIG_CMD_PCMCIA -#undef CONFIG_CMD_REISER -#undef CONFIG_CMD_SCSI -#undef CONFIG_CMD_SPI -#undef CONFIG_CMD_VFD -#undef CONFIG_CMD_USB #undef CONFIG_CMD_XIMG - /*------------------------------------------------------------------------ * COMPACT FLASH *----------------------------------------------------------------------*/ diff --git a/include/configs/DK1S10.h b/include/configs/DK1S10.h index 0032fd3..bd36071 100644 --- a/include/configs/DK1S10.h +++ b/include/configs/DK1S10.h @@ -466,38 +466,25 @@ /* * Command line configuration. */ -#include <config_cmd_all.h> - -#undef CONFIG_CMD_ASKENV -#undef COND_CMD_BEDBUG -#undef COND_CMD_BMP -#undef COND_CMD_BSP -#undef COND_CMD_CACHE -#undef COND_CMD_DATE -#undef COND_CMD_DOC -#undef COND_CMD_DTT -#undef COND_CMD_EEPROM -#undef COND_CMD_ELF -#undef COND_CMD_FAT -#undef COND_CMD_FDC -#undef COND_CMD_FDOS -#undef COND_CMD_HWFLOW -#undef COND_CMD_IDE -#undef COND_CMD_I2C -#undef COND_CMD_JFFS2 -#undef COND_CMD_KGDB -#undef COND_CMD_NAND -#undef COND_CMD_NFS -#undef COND_CMD_MMC -#undef COND_CMD_MII -#undef COND_CMD_PCI -#undef COND_CMD_PCMCIA -#undef COND_CMD_SCSI -#undef COND_CMD_SPI -#undef COND_CMD_VFD -#undef COND_CMD_USB -#undef COND_CMD_XIMG - +#include <config_cmd_default.h> + +#define CONFIG_CMD_CDP +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_DISPLAY +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_IMMAP +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_PING +#define CONFIG_CMD_PORTIO +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_REISER +#define CONFIG_CMD_SAVES +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_SNTP + +#undef CONFIG_CMD_NFS +#undef CONFIG_CMD_XIMG /*------------------------------------------------------------------------ * KGDB diff --git a/include/configs/LANTEC.h b/include/configs/LANTEC.h index 46edd08..e92069b 100644 --- a/include/configs/LANTEC.h +++ b/include/configs/LANTEC.h @@ -87,37 +87,23 @@ /* * Command line configuration. */ -#include <config_cmd_all.h> - -#undef CONFIG_CMD_BEDBUG -#undef CONFIG_CMD_BMP -#undef CONFIG_CMD_BSP -#undef CONFIG_CMD_DISPLAY -#undef CONFIG_CMD_DOC -#undef CONFIG_CMD_DTT -#undef CONFIG_CMD_EEPROM -#undef CONFIG_CMD_ELF -#undef CONFIG_CMD_EXT2 -#undef CONFIG_CMD_FDC -#undef CONFIG_CMD_FDOS -#undef CONFIG_CMD_HWFLOW -#undef CONFIG_CMD_I2C -#undef CONFIG_CMD_IDE -#undef CONFIG_CMD_IRQ -#undef CONFIG_CMD_JFFS2 -#undef CONFIG_CMD_KGDB -#undef CONFIG_CMD_MFSL -#undef CONFIG_CMD_MII -#undef CONFIG_CMD_MMC -#undef CONFIG_CMD_NAND -#undef CONFIG_CMD_PCI -#undef CONFIG_CMD_PCMCIA -#undef CONFIG_CMD_REISER -#undef CONFIG_CMD_SCSI -#undef CONFIG_CMD_SPI -#undef CONFIG_CMD_UNIVERSE -#undef CONFIG_CMD_USB -#undef CONFIG_CMD_VFD +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_CDP +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_FAT +#define CONFIG_CMD_IMMAP +#define CONFIG_CMD_PING +#define CONFIG_CMD_PORTIO +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SAVES +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_SNTP + #undef CONFIG_CMD_XIMG #if !(CONFIG_LANTEC >= 2) diff --git a/include/configs/MPC8260ADS.h b/include/configs/MPC8260ADS.h index 713518d..23508f9 100644 --- a/include/configs/MPC8260ADS.h +++ b/include/configs/MPC8260ADS.h @@ -209,35 +209,25 @@ /* * Command line configuration. */ -#include <config_cmd_all.h> - -#undef CONFIG_CMD_BEDBUG -#undef CONFIG_CMD_BMP -#undef CONFIG_CMD_BSP -#undef CONFIG_CMD_DATE -#undef CONFIG_CMD_DISPLAY -#undef CONFIG_CMD_DOC -#undef CONFIG_CMD_DTT -#undef CONFIG_CMD_EEPROM -#undef CONFIG_CMD_ELF -#undef CONFIG_CMD_EXT2 -#undef CONFIG_CMD_FAT -#undef CONFIG_CMD_FDC -#undef CONFIG_CMD_FDOS -#undef CONFIG_CMD_HWFLOW -#undef CONFIG_CMD_IDE -#undef CONFIG_CMD_KGDB -#undef CONFIG_CMD_MFSL -#undef CONFIG_CMD_MMC -#undef CONFIG_CMD_NAND -#undef CONFIG_CMD_PCMCIA -#undef CONFIG_CMD_REISER -#undef CONFIG_CMD_SCSI -#undef CONFIG_CMD_SPI -#undef CONFIG_CMD_SNTP -#undef CONFIG_CMD_UNIVERSE -#undef CONFIG_CMD_USB -#undef CONFIG_CMD_VFD +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_CDP +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IMMAP +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_MII +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_PORTIO +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SAVES +#define CONFIG_CMD_SDRAM + #undef CONFIG_CMD_XIMG #if CONFIG_ADSTYPE == CFG_8272ADS diff --git a/include/configs/MPC8266ADS.h b/include/configs/MPC8266ADS.h index 14b041e..0856b6a 100644 --- a/include/configs/MPC8266ADS.h +++ b/include/configs/MPC8266ADS.h @@ -146,36 +146,24 @@ /* * Command line configuration. */ -#include <config_cmd_all.h> - -#undef CONFIG_CMD_BEDBUG -#undef CONFIG_CMD_BMP -#undef CONFIG_CMD_BSP -#undef CONFIG_CMD_DATE -#undef CONFIG_CMD_DHCP -#undef CONFIG_CMD_DISPLAY -#undef CONFIG_CMD_DOC -#undef CONFIG_CMD_DTT -#undef CONFIG_CMD_EEPROM -#undef CONFIG_CMD_ELF -#undef CONFIG_CMD_EXT2 -#undef CONFIG_CMD_FDC -#undef CONFIG_CMD_FDOS -#undef CONFIG_CMD_HWFLOW -#undef CONFIG_CMD_IDE -#undef CONFIG_CMD_JFFS2 -#undef CONFIG_CMD_KGDB -#undef CONFIG_CMD_MFSL -#undef CONFIG_CMD_MMC -#undef CONFIG_CMD_NAND -#undef CONFIG_CMD_PCMCIA -#undef CONFIG_CMD_REISER -#undef CONFIG_CMD_SCSI -#undef CONFIG_CMD_SPI -#undef CONFIG_CMD_SNTP -#undef CONFIG_CMD_VFD -#undef CONFIG_CMD_UNIVERSE -#undef CONFIG_CMD_USB +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_CDP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_FAT +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IMMAP +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_MII +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_PORTIO +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SAVES +#define CONFIG_CMD_SDRAM + #undef CONFIG_CMD_XIMG /* Define a command string that is automatically executed when no character diff --git a/include/configs/RBC823.h b/include/configs/RBC823.h index 2f6de81..fa32e33 100644 --- a/include/configs/RBC823.h +++ b/include/configs/RBC823.h @@ -105,36 +105,31 @@ /* * Command line configuration. */ -#include <config_cmd_all.h> - -#undef CONFIG_CMD_BSP -#undef CONFIG_CMD_DATE -#undef CONFIG_CMD_DISPLAY -#undef CONFIG_CMD_DTT -#undef CONFIG_CMD_EXT2 -#undef CONFIG_CMD_FDC -#undef CONFIG_CMD_FDOS -#undef CONFIG_CMD_HWFLOW -#undef CONFIG_CMD_IDE -#undef CONFIG_CMD_IRQ -#undef CONFIG_CMD_JFFS2 -#undef CONFIG_CMD_MII -#undef CONFIG_CMD_MFSL -#undef CONFIG_CMD_MMC -#undef CONFIG_CMD_NAND -#undef CONFIG_CMD_PCI -#undef CONFIG_CMD_PCMCIA -#undef CONFIG_CMD_REISER -#undef CONFIG_CMD_SCSI +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_BEDBUG +#define CONFIG_CMD_BMP +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_CDP +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_DOC +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_ELF +#define CONFIG_CMD_FAT +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IMMAP +#define CONFIG_CMD_KGDB +#define CONFIG_CMD_PING +#define CONFIG_CMD_PORTIO +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SAVES +#define CONFIG_CMD_SDRAM + #undef CONFIG_CMD_SETGETDCR -#undef CONFIG_CMD_SNTP -#undef CONFIG_CMD_SPI -#undef CONFIG_CMD_UNIVERSE -#undef CONFIG_CMD_USB -#undef CONFIG_CMD_VFD #undef CONFIG_CMD_XIMG - /* * Miscellaneous configurable options */ diff --git a/include/configs/ep8260.h b/include/configs/ep8260.h index 025c249..0a509d6 100644 --- a/include/configs/ep8260.h +++ b/include/configs/ep8260.h @@ -303,38 +303,29 @@ /* * Command line configuration. */ -#include <config_cmd_all.h> +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_BEDBUG +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_CDP +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_ELF +#define CONFIG_CMD_FAT +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IMMAP +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_PING +#define CONFIG_CMD_PORTIO +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SAVES +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_SNTP -#undef CONFIG_CMD_BMP -#undef CONFIG_CMD_BSP #undef CONFIG_CMD_DCR -#undef CONFIG_CMD_DHCP -#undef CONFIG_CMD_DISPLAY -#undef CONFIG_CMD_DOC -#undef CONFIG_CMD_DTT -#undef CONFIG_CMD_EEPROM -#undef CONFIG_CMD_EXT2 -#undef CONFIG_CMD_FDC -#undef CONFIG_CMD_FDOS -#undef CONFIG_CMD_HWFLOW -#undef CONFIG_CMD_IDE -#undef CONFIG_CMD_JFFS2 -#undef CONFIG_CMD_KGDB -#undef CONFIG_CMD_MII -#undef CONFIG_CMD_MFSL -#undef CONFIG_CMD_MMC -#undef CONFIG_CMD_NAND -#undef CONFIG_CMD_PCI -#undef CONFIG_CMD_PCMCIA -#undef CONFIG_CMD_REISER -#undef CONFIG_CMD_SCSI -#undef CONFIG_CMD_SPI -#undef CONFIG_CMD_UNIVERSE -#undef CONFIG_CMD_USB -#undef CONFIG_CMD_VFD #undef CONFIG_CMD_XIMG - /* Where do the internal registers live? */ #define CFG_IMMR 0xF0000000 #define CFG_DEFAULT_IMMR 0x00010000 diff --git a/include/configs/hymod.h b/include/configs/hymod.h index 2547afb..01e7970 100644 --- a/include/configs/hymod.h +++ b/include/configs/hymod.h @@ -185,33 +185,34 @@ /* * Command line configuration. */ -#include <config_cmd_all.h> - -#undef CONFIG_CMD_BEDBUG -#undef CONFIG_CMD_BMP -#undef CONFIG_CMD_DISPLAY -#undef CONFIG_CMD_DOC -#undef CONFIG_CMD_EXT2 -#undef CONFIG_CMD_FDC -#undef CONFIG_CMD_FDOS +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_BSP +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_CDP +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_DTT +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_ELF +#define CONFIG_CMD_FAT +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IMMAP +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_KGDB +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_PORTIO +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SAVES +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_SNTP + #undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_HWFLOW -#undef CONFIG_CMD_IDE -#undef CONFIG_CMD_JFFS2 -#undef CONFIG_CMD_NAND -#undef CONFIG_CMD_MFSL -#undef CONFIG_CMD_MMC -#undef CONFIG_CMD_PCMCIA -#undef CONFIG_CMD_PCI -#undef CONFIG_CMD_USB -#undef CONFIG_CMD_REISER -#undef CONFIG_CMD_SCSI -#undef CONFIG_CMD_SPI -#undef CONFIG_CMD_UNIVERSE -#undef CONFIG_CMD_VFD #undef CONFIG_CMD_XIMG - #ifdef DEBUG #define CONFIG_BOOTDELAY -1 /* autoboot disabled */ #else -- 1.5.3.2

2 1

[U-Boot-Users] [PATCH] xsengine: Fix no partition type specified, use DOS as default
by Jean-Christophe PLAGNIOL-VILLARD 24 Oct '07

24 Oct '07

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj(a)jcrosoft.com> diff --git a/board/xsengine/flash.c b/board/xsengine/flash.c index 2b9afc7..a188e24 100644 --- a/board/xsengine/flash.c +++ b/board/xsengine/flash.c @@ -46,11 +46,11 @@ unsigned long flash_init (void) for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) { switch (i) { case 0: - flash_get_size ((long *) PHYS_FLASH_1, &flash_info[i]); + flash_get_size ((vu_long *) PHYS_FLASH_1, &flash_info[i]); flash_get_offsets (PHYS_FLASH_1, &flash_info[i]); break; case 1: - flash_get_size ((long *) PHYS_FLASH_2, &flash_info[i]); + flash_get_size ((vu_long *) PHYS_FLASH_2, &flash_info[i]); flash_get_offsets (PHYS_FLASH_2, &flash_info[i]); break; default: diff --git a/include/configs/xsengine.h b/include/configs/xsengine.h index 5733933..766617e 100644 --- a/include/configs/xsengine.h +++ b/include/configs/xsengine.h @@ -32,6 +32,7 @@ #define CONFIG_PXA250 1 /* This is an PXA250 CPU */ #define CONFIG_XSENGINE 1 #define CONFIG_MMC 1 +#define CONFIG_DOS_PARTITION 1 #define BOARD_POST_INIT 1 #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ #define CFG_HZ 3686400 /* incrementer freq: 3.6864 MHz */ -- 1.5.3.2

2 1

[U-Boot-Users] [PATCH] lubbock: Fix no partition type specified, use DOS as default
by Jean-Christophe PLAGNIOL-VILLARD 24 Oct '07

24 Oct '07

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj(a)jcrosoft.com> diff --git a/include/configs/lubbock.h b/include/configs/lubbock.h index 4adf254..82fe19c 100644 --- a/include/configs/lubbock.h +++ b/include/configs/lubbock.h @@ -42,6 +42,7 @@ #endif #define CONFIG_MMC 1 #define BOARD_LATE_INIT 1 +#define CONFIG_DOS_PARTITION #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ -- 1.5.3.2

2 1

[U-Boot-Users] [PATCH] Fix missing drivers makefile entries ds1722.c mw_eeprom.c
by Jean-Christophe PLAGNIOL-VILLARD 24 Oct '07

24 Oct '07

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj(a)jcrosoft.com> diff --git a/drivers/Makefile b/drivers/Makefile index 6bf05cc..aba64f5 100755 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -54,7 +54,8 @@ COBJS = 3c589.o 5701rls.o ali512x.o at45.o ata_piix.o atmel_usart.o \ ks8695eth.o \ pxa_pcmcia.o mpc8xx_pcmcia.o tqm8xx_pcmcia.o \ rpx_pcmcia.o \ - fsl_i2c.o fsl_pci_init.o ati_radeon_fb.o + fsl_i2c.o fsl_pci_init.o ati_radeon_fb.o \ + ds1722.o mw_eeprom.o SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/drivers/ds1722.c b/drivers/ds1722.c index 227d816..c19ee01 100644 --- a/drivers/ds1722.c +++ b/drivers/ds1722.c @@ -1,10 +1,10 @@ #include <common.h> -#include <ssi.h> - #ifdef CONFIG_DS1722 +#include <ssi.h> + static void ds1722_select(int dev) { ssi_set_interface(4096, 0, 0, 0); diff --git a/drivers/mw_eeprom.c b/drivers/mw_eeprom.c index 2a1f489..2b33488 100644 --- a/drivers/mw_eeprom.c +++ b/drivers/mw_eeprom.c @@ -1,11 +1,11 @@ /* Three-wire (MicroWire) serial eeprom driver (for 93C46 and compatibles) */ #include <common.h> -#include <ssi.h> - #ifdef CONFIG_MW_EEPROM +#include <ssi.h> + /* * Serial EEPROM opcodes, including start bit */ -- 1.5.3.2

2 1