July 2024 - U-Boot

[PATCH] configs: am64x_evm_a53_defconfig: Enable I2C GPIO drivers
by Roger Quadros 06 Jul '24

06 Jul '24

The board has the TCA9554 I2C GPIO expander chip for expansion board presence detection logic. Enable the relevant I2C GPIO drivers. Signed-off-by: Roger Quadros <rogerq(a)kernel.org> --- configs/am64x_evm_a53_defconfig | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/configs/am64x_evm_a53_defconfig b/configs/am64x_evm_a53_defconfig index e000549d6d0..8411a29a2ae 100644 --- a/configs/am64x_evm_a53_defconfig +++ b/configs/am64x_evm_a53_defconfig @@ -103,7 +103,11 @@ CONFIG_SYS_DFU_MAX_FILE_SIZE=0x800000 CONFIG_DMA_CHANNELS=y CONFIG_TI_K3_NAVSS_UDMA=y CONFIG_TI_SCI_PROTOCOL=y +CONFIG_DM_PCA953X=y +CONFIG_SPL_DM_PCA953X=y CONFIG_DM_I2C=y +CONFIG_I2C_SET_DEFAULT_BUS_NUM=y +CONFIG_DM_I2C_GPIO=y CONFIG_SYS_I2C_OMAP24XX=y CONFIG_DM_MAILBOX=y CONFIG_K3_SEC_PROXY=y --- base-commit: fe2ce09a0753634543c32cafe85eb87a625f76ca change-id: 20240623-for-2023-10-am64-nand-cdec8003ca80 Best regards, -- Roger Quadros <rogerq(a)kernel.org>

2 1

[PATCH] doc: board: phytec: phycore-am6: Describe UART based boot
by Wadim Egorov 06 Jul '24

06 Jul '24

Describe how to boot via UART. Signed-off-by: Wadim Egorov <w.egorov(a)phytec.de> --- For next --- doc/board/phytec/phycore-am62x.rst | 17 +++++++++++++++++ doc/board/phytec/phycore-am64x.rst | 19 +++++++++++++++++++ 2 files changed, 36 insertions(+) diff --git a/doc/board/phytec/phycore-am62x.rst b/doc/board/phytec/phycore-am62x.rst index a615d01474e..5f02a9db5f8 100644 --- a/doc/board/phytec/phycore-am62x.rst +++ b/doc/board/phytec/phycore-am62x.rst @@ -118,6 +118,23 @@ tiboot3.bin, tispl.bin and u-boot.img are stored on the uSD card. fatload mmc 1 ${loadaddr} u-boot.img mtd write ospi.u-boot ${loadaddr} 0 ${filesize} +UART based boot +--------------- + +To boot the board via UART, set the switches to UART mode and connect to the +micro USB port labeled as "Debug UART". After power-on the build artifacts +needs to be uploaded one by one with a tool like sz. + +Example bash script sequence for running on a Linux host PC feeding all boot +artifacts needed to the device. Assuming the host uses /dev/ttyUSB0 as +the main domain serial port: + +.. prompt:: bash $ + + stty -F /dev/ttyUSB0 115200 + sb --xmodem tiboot3.bin > /dev/ttyUSB0 < /dev/ttyUSB0 + sb --ymodem tispl.bin > /dev/ttyUSB0 < /dev/ttyUSB0 + sb --ymodem u-boot.img > /dev/ttyUSB0 < /dev/ttyUSB0 Boot Modes ---------- diff --git a/doc/board/phytec/phycore-am64x.rst b/doc/board/phytec/phycore-am64x.rst index 189da179534..e7f8656e1bf 100644 --- a/doc/board/phytec/phycore-am64x.rst +++ b/doc/board/phytec/phycore-am64x.rst @@ -119,6 +119,25 @@ tiboot3.bin, tispl.bin and u-boot.img are stored on the uSD card. fatload mmc 1 ${loadaddr} u-boot.img mtd write ospi.u-boot ${loadaddr} 0 ${filesize} +UART based boot +--------------- + +To boot the board via UART, set the switches to UART mode and connect to the +micro USB port labeled as "Debug UART". After power-on the build artifacts +needs to be uploaded one by one with a tool like sz. + +Example bash script sequence for running on a Linux host PC feeding all boot +artifacts needed to the device. Assuming the host uses /dev/ttyUSB0 as +the main domain serial port: + +.. prompt:: bash $ + + stty -F /dev/ttyUSB0 115200 + sb --xmodem tiboot3.bin > /dev/ttyUSB0 < /dev/ttyUSB0 + # Resend tiboot3.bin a 2nd time due to ErrataID:i2331 + sb --xmodem tiboot3.bin > /dev/ttyUSB0 < /dev/ttyUSB0 + sb --ymodem tispl.bin > /dev/ttyUSB0 < /dev/ttyUSB0 + sb --ymodem u-boot.img > /dev/ttyUSB0 < /dev/ttyUSB0 Boot Modes ---------- -- 2.34.1

2 1

[PATCH v5] cmd: bootm: add ELF file support
by Maxim Moskalets 06 Jul '24

06 Jul '24

Some operating systems (e.g. seL4) and embedded applications are ELF images. It is convenient to use FIT-images to implement trusted boot. Added "elf" image type for booting using bootm command. Signed-off-by: Maxim Moskalets <maximmosk4(a)gmail.com> --- v5: used func from lib/elf.c to avoid dependency form CLI --- boot/bootm_os.c | 18 ++++++++++++++++++ boot/image-fit.c | 3 ++- boot/image.c | 5 ++++- cmd/Kconfig | 7 +++++++ include/image.h | 1 + 5 files changed, 32 insertions(+), 2 deletions(-) diff --git a/boot/bootm_os.c b/boot/bootm_os.c index 15297ddb53..6a6621706f 100644 --- a/boot/bootm_os.c +++ b/boot/bootm_os.c @@ -8,6 +8,7 @@ #include <bootstage.h> #include <cpu_func.h> #include <efi_loader.h> +#include <elf.h> #include <env.h> #include <fdt_support.h> #include <image.h> @@ -394,6 +395,20 @@ static int do_bootm_qnxelf(int flag, struct bootm_info *bmi) } #endif +#if defined(CONFIG_BOOTM_ELF) +static int do_bootm_elf(int flag, struct bootm_info *bmi) +{ + Bootelf_flags flags = { .autostart = 1 }; + + if (flag != BOOTM_STATE_OS_GO) + return 0; + + bootelf(bmi->images->ep, flags, 0, NULL); + + return 1; +} +#endif + #ifdef CONFIG_INTEGRITY static int do_bootm_integrity(int flag, struct bootm_info *bmi) { @@ -535,6 +550,9 @@ static boot_os_fn *boot_os[] = { #ifdef CONFIG_BOOTM_EFI [IH_OS_EFI] = do_bootm_efi, #endif +#if defined(CONFIG_BOOTM_ELF) + [IH_OS_ELF] = do_bootm_elf, +#endif }; /* Allow for arch specific config before we boot */ diff --git a/boot/image-fit.c b/boot/image-fit.c index f6464bcf62..9253f81fff 100644 --- a/boot/image-fit.c +++ b/boot/image-fit.c @@ -2175,7 +2175,8 @@ int fit_image_load(struct bootm_headers *images, ulong addr, fit_image_check_os(fit, noffset, IH_OS_TEE) || fit_image_check_os(fit, noffset, IH_OS_OPENRTOS) || fit_image_check_os(fit, noffset, IH_OS_EFI) || - fit_image_check_os(fit, noffset, IH_OS_VXWORKS); + fit_image_check_os(fit, noffset, IH_OS_VXWORKS) || + fit_image_check_os(fit, noffset, IH_OS_ELF); /* * If either of the checks fail, we should report an error, but diff --git a/boot/image.c b/boot/image.c index fc774d605d..abac254e02 100644 --- a/boot/image.c +++ b/boot/image.c @@ -130,7 +130,10 @@ static const table_entry_t uimage_os[] = { { IH_OS_OPENRTOS, "openrtos", "OpenRTOS", }, #endif { IH_OS_OPENSBI, "opensbi", "RISC-V OpenSBI", }, - { IH_OS_EFI, "efi", "EFI Firmware" }, + { IH_OS_EFI, "efi", "EFI Firmware" }, +#ifdef CONFIG_BOOTM_ELF + { IH_OS_ELF, "elf", "ELF Image" }, +#endif { -1, "", "", }, }; diff --git a/cmd/Kconfig b/cmd/Kconfig index a2dee34689..613baa106e 100644 --- a/cmd/Kconfig +++ b/cmd/Kconfig @@ -321,6 +321,13 @@ config BOOTM_EFI help Support booting UEFI FIT images via the bootm command. +config BOOTM_ELF + bool "Support booting ELF images" + depends on CMD_BOOTM && LIB_ELF + default n + help + Support booting ELF images via the bootm command. + config CMD_BOOTZ bool "bootz" help diff --git a/include/image.h b/include/image.h index c5b288f62b..9daaee15cd 100644 --- a/include/image.h +++ b/include/image.h @@ -100,6 +100,7 @@ enum { IH_OS_TEE, /* Trusted Execution Environment */ IH_OS_OPENSBI, /* RISC-V OpenSBI */ IH_OS_EFI, /* EFI Firmware (e.g. GRUB2) */ + IH_OS_ELF, /* ELF Image (e.g. seL4) */ IH_OS_COUNT, }; -- 2.39.2

4 4

[PATCH] mkimage: Allow 'auto-conf' signing of scripts
by Alexander Dahl 06 Jul '24

06 Jul '24

U-Boot configured for verified boot with the "required" option set to "conf" also checks scripts put in FIT images for a valid signature, and refuses to source and run such a script if the signature for the configuration is bad or missing. Such a script could not be packaged before, because mkimage failed like this: % tools/mkimage -T script -C none -d tmp/my.scr -f auto-conf -k tmp -g dev -o sha256,rsa4096 my.uimg Failed to find any images for configuration 'conf-1/signature' tools/mkimage Can't add hashes to FIT blob: -1 Error: Bad parameters for FIT image type This is especially unfortunate if LEGACY_IMAGE_FORMAT is disabled as recommended. Listing the script configuration in a "sign-images" subnode instead, would have added even more complexity to the already complex auto fit generation code. Signed-off-by: Alexander Dahl <ada(a)thorsis.com> --- tools/image-host.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/image-host.c b/tools/image-host.c index 7bfc0cb6b18..49ce7436bb9 100644 --- a/tools/image-host.c +++ b/tools/image-host.c @@ -730,7 +730,7 @@ static const char *fit_config_get_image_list(const void *fit, int noffset, int *lenp, int *allow_missingp) { static const char default_list[] = FIT_KERNEL_PROP "\0" - FIT_FDT_PROP; + FIT_FDT_PROP "\0" FIT_SCRIPT_PROP; const char *prop; /* If there is an "sign-image" property, use that */ base-commit: fe2ce09a0753634543c32cafe85eb87a625f76ca -- 2.39.2

2 1

[PATCH] Fix Kconfig coding style from spaces to tab
by Anand Moon 06 Jul '24

06 Jul '24

Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: Anand Moon <linux.amoon(a)gmail.com> --- boot/Kconfig | 8 ++++---- cmd/Kconfig | 20 ++++++++++---------- disk/Kconfig | 2 +- lib/Kconfig | 2 +- net/Kconfig | 4 ++-- 5 files changed, 18 insertions(+), 18 deletions(-) diff --git a/boot/Kconfig b/boot/Kconfig index 6f3096c15a..12148ac3f2 100644 --- a/boot/Kconfig +++ b/boot/Kconfig @@ -150,10 +150,10 @@ config FIT_IMAGE_POST_PROCESS processed before being added to the FIT image). config FIT_PRINT - bool "Support FIT printing" - default y - help - Support printing the content of the fitImage in a verbose manner. + bool "Support FIT printing" + default y + help + Support printing the content of the fitImage in a verbose manner. config SPL_FIT bool "Support Flattened Image Tree within SPL" diff --git a/cmd/Kconfig b/cmd/Kconfig index b026439c77..011f4ad429 100644 --- a/cmd/Kconfig +++ b/cmd/Kconfig @@ -271,7 +271,7 @@ config CMD_BOOTM_PRE_LOAD depends on CMD_BOOTM depends on IMAGE_PRE_LOAD help - Enable support of stage pre-load for the bootm command. + Enable support of stage pre-load for the bootm command. This stage allow to check or modify the image provided to the bootm command. @@ -897,9 +897,9 @@ config CMD_MX_CYCLIC bool "Enable cyclic md/mw commands" depends on CMD_MEMORY help - Add the "mdc" and "mwc" memory commands. These are cyclic - "md/mw" commands. - Examples: + Add the "mdc" and "mwc" memory commands. These are cyclic + "md/mw" commands. + Examples: => mdc.b 10 4 500 This command will print 4 bytes (10,11,12,13) each 500 ms. @@ -2150,12 +2150,12 @@ config CMD_BLKMAP Example use-cases: - Treat a region of RAM as a block device, i.e. a RAM disk. This let's - you extract files from filesystem images stored in RAM (perhaps as a - result of a TFTP transfer). + you extract files from filesystem images stored in RAM (perhaps as a + result of a TFTP transfer). - Create a virtual partition on an existing device. This let's you - access filesystems that aren't stored at an exact partition - boundary. A common example is a filesystem image embedded in an FIT - image. + access filesystems that aren't stored at an exact partition + boundary. A common example is a filesystem image embedded in an FIT + image. config CMD_BUTTON bool "button" @@ -2934,7 +2934,7 @@ config CMD_UBI_RENAME bool "Enable rename" depends on CMD_UBI help - Enable a "ubi" command to rename ubi volume: + Enable a "ubi" command to rename ubi volume: ubi rename <oldname> <newname> config CMD_UBIFS diff --git a/disk/Kconfig b/disk/Kconfig index 8549695807..ffa835eb35 100644 --- a/disk/Kconfig +++ b/disk/Kconfig @@ -116,7 +116,7 @@ config EFI_PARTITION_ENTRIES_NUMBERS number. config EFI_PARTITION_ENTRIES_OFF - int "Offset (in bytes) of the EFI partition entries" + int "Offset (in bytes) of the EFI partition entries" depends on EFI_PARTITION default 0 help diff --git a/lib/Kconfig b/lib/Kconfig index 189e6eb31a..b8e4f516f9 100644 --- a/lib/Kconfig +++ b/lib/Kconfig @@ -1143,7 +1143,7 @@ config PHANDLE_CHECK_SEQ bool "Enable phandle check while getting sequence number" help When there are multiple device tree nodes with same name, - enable this config option to distinguish them using + enable this config option to distinguish them using phandles in fdtdec_get_alias_seq() function. endmenu diff --git a/net/Kconfig b/net/Kconfig index 5dff633629..7cb80b880a 100644 --- a/net/Kconfig +++ b/net/Kconfig @@ -42,8 +42,8 @@ config BOOTP_SEND_HOSTNAME DNS server. To do this, they need the hostname of the DHCP requester. If CONFIG_BOOTP_SEND_HOSTNAME is defined, the content - of the "hostname" environment variable is passed as - option 12 to the DHCP server. + of the "hostname" environment variable is passed as + option 12 to the DHCP server. config NET_RANDOM_ETHADDR bool "Random ethaddr if unset" -- 2.44.0

2 1

[PATCH] configs: Remove duplicate newlines
by Marek Vasut 06 Jul '24

06 Jul '24

Drop all duplicate newlines from config headers. No functional change. Signed-off-by: Marek Vasut <marek.vasut+renesas(a)mailbox.org> --- Cc: Francesco Dolcini <francesco.dolcini(a)toradex.com> Cc: Sean Anderson <seanga2(a)gmail.com> Cc: Simon Glass <sjg(a)chromium.org> Cc: Tom Rini <trini(a)konsulko.com> Cc: u-boot(a)lists.denx.de --- include/configs/M5208EVBE.h | 1 - include/configs/M5235EVB.h | 1 - include/configs/M5249EVB.h | 1 - include/configs/M5253DEMO.h | 2 -- include/configs/M5272C3.h | 1 - include/configs/M5275EVB.h | 1 - include/configs/M5282EVB.h | 1 - include/configs/M53017EVB.h | 1 - include/configs/M5329EVB.h | 1 - include/configs/M5373EVB.h | 1 - include/configs/MPC837XERDB.h | 1 - include/configs/P2041RDB.h | 1 - include/configs/T4240RDB.h | 1 - include/configs/arbel.h | 1 - include/configs/aristainetos2.h | 1 - include/configs/astro_mcf5373l.h | 1 - include/configs/cobra5272.h | 1 - include/configs/display5.h | 1 - include/configs/ds414.h | 1 - include/configs/eb_cpu5282.h | 1 - include/configs/ethernut5.h | 1 - include/configs/ge_bx50v3.h | 1 - include/configs/imx6_logic.h | 1 - include/configs/imx7-cm.h | 1 - include/configs/imx8mm-cl-iot-gate.h | 1 - include/configs/imx8mm_evk.h | 1 - include/configs/imx8mn_evk.h | 1 - include/configs/imx8mp_evk.h | 1 - include/configs/imx8mp_rsb3720.h | 1 - include/configs/imx8mq_cm.h | 1 - include/configs/imx8mq_evk.h | 1 - include/configs/imx8mq_phanbell.h | 1 - include/configs/imx8mq_reform2.h | 1 - include/configs/imx8ulp_evk.h | 2 -- include/configs/j721e_evm.h | 1 - include/configs/kontron_pitx_imx8m.h | 2 -- include/configs/ls1012aqds.h | 1 - include/configs/ls1043a_common.h | 1 - include/configs/ls1088a_common.h | 3 --- include/configs/ls1088aqds.h | 1 - include/configs/ls1088ardb.h | 1 - include/configs/lx2160a_common.h | 1 - include/configs/meson64.h | 1 - include/configs/mt8183.h | 1 - include/configs/mt8516.h | 1 - include/configs/mx53cx9020.h | 1 - include/configs/mx6ullevk.h | 1 - include/configs/mx7ulp_evk.h | 1 - include/configs/phycore_imx8mm.h | 1 - include/configs/phycore_imx8mp.h | 1 - include/configs/pico-imx6ul.h | 1 - include/configs/pico-imx8mq.h | 1 - include/configs/sei510.h | 1 - include/configs/siemens-am33x-common.h | 1 - include/configs/socrates.h | 1 - include/configs/stm32mp15_dh_dhsom.h | 1 - include/configs/stmark2.h | 1 - include/configs/ten64.h | 1 - include/configs/topic_miami.h | 1 - include/configs/warp7.h | 1 - include/configs/x86-common.h | 1 - include/configs/xtfpga.h | 1 - include/configs/zynq-common.h | 1 - 63 files changed, 68 deletions(-) diff --git a/include/configs/M5208EVBE.h b/include/configs/M5208EVBE.h index d4c1e066884..a4fda551f1f 100644 --- a/include/configs/M5208EVBE.h +++ b/include/configs/M5208EVBE.h @@ -111,5 +111,4 @@ #define CFG_SYS_CS0_MASK 0x007F0001 #define CFG_SYS_CS0_CTRL 0x00001FA0 - #endif /* _M5208EVBE_H */ diff --git a/include/configs/M5235EVB.h b/include/configs/M5235EVB.h index e5428183400..8939c8e7ab9 100644 --- a/include/configs/M5235EVB.h +++ b/include/configs/M5235EVB.h @@ -130,5 +130,4 @@ # define CFG_SYS_CS0_CTRL 0x00001D80 #endif - #endif /* _M5329EVB_H */ diff --git a/include/configs/M5249EVB.h b/include/configs/M5249EVB.h index 2f4743ce50c..4fd539c0174 100644 --- a/include/configs/M5249EVB.h +++ b/include/configs/M5249EVB.h @@ -120,5 +120,4 @@ #define CFG_SYS_GPIO1_OUT 0x00c70000 /* Set outputs to default state */ #define CFG_SYS_GPIO1_LED 0x00400000 /* user led */ - #endif /* M5249 */ diff --git a/include/configs/M5253DEMO.h b/include/configs/M5253DEMO.h index 0ff0bfce90b..75c70be7ac4 100644 --- a/include/configs/M5253DEMO.h +++ b/include/configs/M5253DEMO.h @@ -10,7 +10,6 @@ #define CFG_SYS_UART_PORT (0) - /* Configuration for environment * Environment is embedded in u-boot in the second sector of the flash */ @@ -132,5 +131,4 @@ #define CFG_SYS_GPIO1_OUT 0x00c70000 /* Set outputs to default state */ #define CFG_SYS_GPIO1_LED 0x00400000 /* user led */ - #endif /* _M5253DEMO_H */ diff --git a/include/configs/M5272C3.h b/include/configs/M5272C3.h index 98a17181a41..0d332cba61c 100644 --- a/include/configs/M5272C3.h +++ b/include/configs/M5272C3.h @@ -107,5 +107,4 @@ #define CFG_SYS_PBDAT 0x0000 #define CFG_SYS_PDCNT 0x00000000 - #endif /* _M5272C3_H */ diff --git a/include/configs/M5275EVB.h b/include/configs/M5275EVB.h index 77ddf717643..607c5dee2fb 100644 --- a/include/configs/M5275EVB.h +++ b/include/configs/M5275EVB.h @@ -116,5 +116,4 @@ #define CFG_SYS_CS1_CTRL 0x00001900 #define CFG_SYS_CS1_MASK 0x00070001 - #endif /* _M5275EVB_H */ diff --git a/include/configs/M5282EVB.h b/include/configs/M5282EVB.h index e289a23b800..31699a40b6f 100644 --- a/include/configs/M5282EVB.h +++ b/include/configs/M5282EVB.h @@ -127,5 +127,4 @@ #define CFG_SYS_DDRUA 0x05 #define CFG_SYS_PJPAR 0xFF - #endif /* _CONFIG_M5282EVB_H */ diff --git a/include/configs/M53017EVB.h b/include/configs/M53017EVB.h index dcc5701ee0b..6359915e09a 100644 --- a/include/configs/M53017EVB.h +++ b/include/configs/M53017EVB.h @@ -132,5 +132,4 @@ #define CFG_SYS_CS1_MASK 0x00070001 #define CFG_SYS_CS1_CTRL 0x00001FA0 - #endif /* _M53017EVB_H */ diff --git a/include/configs/M5329EVB.h b/include/configs/M5329EVB.h index dd5d4c98023..456135bdc64 100644 --- a/include/configs/M5329EVB.h +++ b/include/configs/M5329EVB.h @@ -138,5 +138,4 @@ #define CFG_SYS_CS2_CTRL 0x00001f60 #endif - #endif /* _M5329EVB_H */ diff --git a/include/configs/M5373EVB.h b/include/configs/M5373EVB.h index 4bb99487509..4e8dcb5ef7f 100644 --- a/include/configs/M5373EVB.h +++ b/include/configs/M5373EVB.h @@ -136,5 +136,4 @@ #define CFG_SYS_CS2_MASK (16 << 20) #define CFG_SYS_CS2_CTRL 0x00001f60 - #endif /* _M5373EVB_H */ diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h index 3967cc28363..a5176d176dc 100644 --- a/include/configs/MPC837XERDB.h +++ b/include/configs/MPC837XERDB.h @@ -132,7 +132,6 @@ */ #define CFG_SYS_NAND_BASE 0xE0600000 - /* Vitesse 7385 */ #define CFG_SYS_VSC7385_BASE 0xF0000000 diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h index 28f53ae78a1..7cf6514f148 100644 --- a/include/configs/P2041RDB.h +++ b/include/configs/P2041RDB.h @@ -160,7 +160,6 @@ /* I2C */ - /* * RapidIO */ diff --git a/include/configs/T4240RDB.h b/include/configs/T4240RDB.h index 78e136224ec..c95325e162d 100644 --- a/include/configs/T4240RDB.h +++ b/include/configs/T4240RDB.h @@ -355,7 +355,6 @@ #define CFG_SYS_FSL_ESDHC_ADDR CFG_SYS_MPC85xx_ESDHC_ADDR #endif - #define __USB_PHY_TYPE utmi /* diff --git a/include/configs/arbel.h b/include/configs/arbel.h index d8ccc459682..61f6a5e2438 100644 --- a/include/configs/arbel.h +++ b/include/configs/arbel.h @@ -15,7 +15,6 @@ #define CFG_SYS_BAUDRATE_TABLE \ { 9600, 14400, 19200, 38400, 57600, 115200, 230400, 380400, 460800, 921600 } - /* Default environemnt variables */ #define CFG_EXTRA_ENV_SETTINGS "uimage_flash_addr=80400000\0" \ "stdin=serial\0" \ diff --git a/include/configs/aristainetos2.h b/include/configs/aristainetos2.h index 286435d6f84..9d4a4bbdf43 100644 --- a/include/configs/aristainetos2.h +++ b/include/configs/aristainetos2.h @@ -22,7 +22,6 @@ #include "mx6_common.h" - /* MMC Configs */ #define CFG_SYS_FSL_ESDHC_ADDR USDHC1_BASE_ADDR diff --git a/include/configs/astro_mcf5373l.h b/include/configs/astro_mcf5373l.h index f3bfefa835e..65224324fbc 100644 --- a/include/configs/astro_mcf5373l.h +++ b/include/configs/astro_mcf5373l.h @@ -184,5 +184,4 @@ #define CFG_SYS_CACHE_ICACR (CF_CACR_EC | CF_CACR_CINVA | \ CF_CACR_DCM_P) - #endif /* _CONFIG_ASTRO_MCF5373L_H */ diff --git a/include/configs/cobra5272.h b/include/configs/cobra5272.h index 556705fb09f..cd50ffe98d0 100644 --- a/include/configs/cobra5272.h +++ b/include/configs/cobra5272.h @@ -184,5 +184,4 @@ configuration */ #define CFG_SYS_PBDAT 0x0000 /* PortB value reg. */ #define CFG_SYS_PDCNT 0x00000000 /* PortD control reg. */ - #endif /* _CONFIG_COBRA5272_H */ diff --git a/include/configs/display5.h b/include/configs/display5.h index 3b96fff7d6f..2005a256d6e 100644 --- a/include/configs/display5.h +++ b/include/configs/display5.h @@ -119,7 +119,6 @@ "run tftp_mmc_rootfs;" \ "run tftp_mmc_rootfs_bkp;" \ - #define TFTP_UPDATE_RECOVERY_SWU_KERNEL \ "tftp_sf_fitImg_SWU=" \ "if tftp ${loadaddr} ${kernel_file}; then " \ diff --git a/include/configs/ds414.h b/include/configs/ds414.h index f1921dac5e7..6fbcec0898a 100644 --- a/include/configs/ds414.h +++ b/include/configs/ds414.h @@ -53,7 +53,6 @@ "tftpboot ${loadaddr} u-boot-with-spl.kwb; " \ "sf update ${loadaddr} 0x0 0xd0000\0" - /* increase autoneg timeout, my NIC sucks */ #endif /* _CONFIG_SYNOLOGY_DS414_H */ diff --git a/include/configs/eb_cpu5282.h b/include/configs/eb_cpu5282.h index e2c9d9c43ce..26e4ade34ee 100644 --- a/include/configs/eb_cpu5282.h +++ b/include/configs/eb_cpu5282.h @@ -138,6 +138,5 @@ #define CFG_SYS_DDRUA 0x05 #define CFG_SYS_PJPAR 0xFF - #endif /* _CONFIG_M5282EVB_H */ /*---------------------------------------------------------------------*/ diff --git a/include/configs/ethernut5.h b/include/configs/ethernut5.h index 182369def91..807c6963192 100644 --- a/include/configs/ethernut5.h +++ b/include/configs/ethernut5.h @@ -32,7 +32,6 @@ /* 512kB on-chip NOR flash */ # define CFG_SYS_FLASH_BASE 0x00200000 /* AT91SAM9XE_FLASH_BASE */ - /* bootstrap + u-boot + env + linux in dataflash on CS0 */ /* NAND flash */ diff --git a/include/configs/ge_bx50v3.h b/include/configs/ge_bx50v3.h index 32960fb9325..07b36706e56 100644 --- a/include/configs/ge_bx50v3.h +++ b/include/configs/ge_bx50v3.h @@ -88,7 +88,6 @@ "run doboot; " \ "run failbootcmd\0" \ - /* Physical Memory Map */ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR diff --git a/include/configs/imx6_logic.h b/include/configs/imx6_logic.h index 85c054451f3..66004a6eb2a 100644 --- a/include/configs/imx6_logic.h +++ b/include/configs/imx6_logic.h @@ -17,7 +17,6 @@ #define CFG_SYS_FSL_ESDHC_ADDR 0 #define CFG_SYS_FSL_USDHC_NUM 2 - /* Ethernet Configs */ #define CFG_FEC_MXC_PHYADDR 0 diff --git a/include/configs/imx7-cm.h b/include/configs/imx7-cm.h index 106fbdb9053..131f18290b9 100644 --- a/include/configs/imx7-cm.h +++ b/include/configs/imx7-cm.h @@ -77,7 +77,6 @@ #define CFG_SYS_FSL_ESDHC_ADDR USDHC1_BASE_ADDR #define CFG_SYS_FSL_USDHC_NUM 2 - /* USB Configs */ #define CFG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) diff --git a/include/configs/imx8mm-cl-iot-gate.h b/include/configs/imx8mm-cl-iot-gate.h index 0c547027ba6..6442e3d570f 100644 --- a/include/configs/imx8mm-cl-iot-gate.h +++ b/include/configs/imx8mm-cl-iot-gate.h @@ -126,7 +126,6 @@ #define CFG_SYS_INIT_RAM_ADDR 0x40000000 #define CFG_SYS_INIT_RAM_SIZE 0x80000 - #define CFG_SYS_SDRAM_BASE 0x40000000 #define PHYS_SDRAM 0x40000000 #define PHYS_SDRAM_SIZE 0x80000000 /* 2GB DDR */ diff --git a/include/configs/imx8mm_evk.h b/include/configs/imx8mm_evk.h index d5642b96495..9dd63fc1196 100644 --- a/include/configs/imx8mm_evk.h +++ b/include/configs/imx8mm_evk.h @@ -56,7 +56,6 @@ #define CFG_SYS_INIT_RAM_ADDR 0x40000000 #define CFG_SYS_INIT_RAM_SIZE 0x200000 - #define CFG_SYS_SDRAM_BASE 0x40000000 #define PHYS_SDRAM 0x40000000 #define PHYS_SDRAM_SIZE 0x80000000 /* 2GB DDR */ diff --git a/include/configs/imx8mn_evk.h b/include/configs/imx8mn_evk.h index b759b834b80..ca02e26c26e 100644 --- a/include/configs/imx8mn_evk.h +++ b/include/configs/imx8mn_evk.h @@ -48,7 +48,6 @@ #define CFG_SYS_INIT_RAM_ADDR 0x40000000 #define CFG_SYS_INIT_RAM_SIZE 0x200000 - #define CFG_SYS_SDRAM_BASE 0x40000000 #define PHYS_SDRAM 0x40000000 #define PHYS_SDRAM_SIZE 0x80000000 /* 2GB DDR */ diff --git a/include/configs/imx8mp_evk.h b/include/configs/imx8mp_evk.h index 71452aa2833..741ee39db1a 100644 --- a/include/configs/imx8mp_evk.h +++ b/include/configs/imx8mp_evk.h @@ -43,7 +43,6 @@ #define CFG_SYS_INIT_RAM_ADDR 0x40000000 #define CFG_SYS_INIT_RAM_SIZE 0x80000 - /* Totally 6GB DDR */ #define CFG_SYS_SDRAM_BASE 0x40000000 #define PHYS_SDRAM 0x40000000 diff --git a/include/configs/imx8mp_rsb3720.h b/include/configs/imx8mp_rsb3720.h index 10a166d781e..b82e35f4963 100644 --- a/include/configs/imx8mp_rsb3720.h +++ b/include/configs/imx8mp_rsb3720.h @@ -126,7 +126,6 @@ #define CFG_SYS_INIT_RAM_ADDR 0x40000000 #define CFG_SYS_INIT_RAM_SIZE 0x80000 - /* Totally 6GB or 4G DDR */ #define CFG_SYS_SDRAM_BASE 0x40000000 #define PHYS_SDRAM 0x40000000 diff --git a/include/configs/imx8mq_cm.h b/include/configs/imx8mq_cm.h index 7cf482d6de1..2bbd6b1680f 100644 --- a/include/configs/imx8mq_cm.h +++ b/include/configs/imx8mq_cm.h @@ -48,7 +48,6 @@ #define CFG_SYS_INIT_RAM_ADDR 0x40000000 #define CFG_SYS_INIT_RAM_SIZE 0x80000 - #define CFG_SYS_SDRAM_BASE 0x40000000 #define PHYS_SDRAM 0x40000000 #define PHYS_SDRAM_SIZE 0x40000000 /* 1 GB DDR */ diff --git a/include/configs/imx8mq_evk.h b/include/configs/imx8mq_evk.h index d2e1649400a..9eefc31dc6f 100644 --- a/include/configs/imx8mq_evk.h +++ b/include/configs/imx8mq_evk.h @@ -53,7 +53,6 @@ #define CFG_SYS_INIT_RAM_ADDR 0x40000000 #define CFG_SYS_INIT_RAM_SIZE 0x80000 - #define CFG_SYS_SDRAM_BASE 0x40000000 #define PHYS_SDRAM 0x40000000 #define PHYS_SDRAM_SIZE 0xC0000000 /* 3GB DDR */ diff --git a/include/configs/imx8mq_phanbell.h b/include/configs/imx8mq_phanbell.h index b66fc18fa5e..cd73a72d2b7 100644 --- a/include/configs/imx8mq_phanbell.h +++ b/include/configs/imx8mq_phanbell.h @@ -86,7 +86,6 @@ #define CFG_SYS_INIT_RAM_ADDR 0x40000000 #define CFG_SYS_INIT_RAM_SIZE 0x80000 - #define CFG_SYS_SDRAM_BASE 0x40000000 #define PHYS_SDRAM 0x40000000 #define PHYS_SDRAM_SIZE 0x40000000 /* 1GB DDR */ diff --git a/include/configs/imx8mq_reform2.h b/include/configs/imx8mq_reform2.h index 3148e8622e1..7fa441a8a83 100644 --- a/include/configs/imx8mq_reform2.h +++ b/include/configs/imx8mq_reform2.h @@ -54,7 +54,6 @@ #define CFG_SYS_INIT_RAM_ADDR 0x40000000 #define CFG_SYS_INIT_RAM_SIZE 0x80000 - #define CFG_SYS_SDRAM_BASE 0x40000000 #define PHYS_SDRAM 0x40000000 #define PHYS_SDRAM_SIZE 0x100000000 /* 4 GiB DDR */ diff --git a/include/configs/imx8ulp_evk.h b/include/configs/imx8ulp_evk.h index 750aef1b597..aa9da19a11f 100644 --- a/include/configs/imx8ulp_evk.h +++ b/include/configs/imx8ulp_evk.h @@ -14,7 +14,6 @@ #ifdef CONFIG_SPL_BUILD #define CFG_MALLOC_F_ADDR 0x22040000 - #endif /* ENET Config */ @@ -51,7 +50,6 @@ #define CFG_SYS_INIT_RAM_ADDR 0x80000000 #define CFG_SYS_INIT_RAM_SIZE 0x80000 - #define CFG_SYS_SDRAM_BASE 0x80000000 #define PHYS_SDRAM 0x80000000 #define PHYS_SDRAM_SIZE 0x80000000 /* 2GB DDR */ diff --git a/include/configs/j721e_evm.h b/include/configs/j721e_evm.h index c26438c8684..d6853cd339f 100644 --- a/include/configs/j721e_evm.h +++ b/include/configs/j721e_evm.h @@ -25,5 +25,4 @@ /* Now for the remaining common defines */ #include <configs/ti_armv7_common.h> - #endif /* __CONFIG_J721E_EVM_H */ diff --git a/include/configs/kontron_pitx_imx8m.h b/include/configs/kontron_pitx_imx8m.h index 101c59141f7..3dda7b66806 100644 --- a/include/configs/kontron_pitx_imx8m.h +++ b/include/configs/kontron_pitx_imx8m.h @@ -18,7 +18,6 @@ #define CFG_MALLOC_F_ADDR 0x182000 /* For RAW image gives a error info not panic */ - #define CFG_POWER_PFUZE100_I2C_ADDR 0x08 #endif @@ -56,7 +55,6 @@ ENV_MEM_LAYOUT_SETTINGS \ BOOTENV - #define CFG_SYS_INIT_RAM_ADDR 0x40000000 #define CFG_SYS_INIT_RAM_SIZE 0x80000 diff --git a/include/configs/ls1012aqds.h b/include/configs/ls1012aqds.h index 35e8ff05798..3c4f8b75b18 100644 --- a/include/configs/ls1012aqds.h +++ b/include/configs/ls1012aqds.h @@ -48,7 +48,6 @@ */ #define CFG_SYS_I2C_RTC_ADDR 0x51 /* Channel 3*/ - /* Voltage monitor on channel 2*/ #define I2C_VOL_MONITOR_ADDR 0x40 #define I2C_VOL_MONITOR_BUS_V_OFFSET 0x2 diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h index ac2319c1b42..e500a7d80ff 100644 --- a/include/configs/ls1043a_common.h +++ b/include/configs/ls1043a_common.h @@ -159,7 +159,6 @@ " && esbc_validate ${kernelheader_addr_r};" \ "bootm $load_addr#$board\0" - #ifdef CONFIG_TFABOOT #define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; " \ "env exists secureboot && esbc_halt;" diff --git a/include/configs/ls1088a_common.h b/include/configs/ls1088a_common.h index 720a95d2f53..34085eeecc7 100644 --- a/include/configs/ls1088a_common.h +++ b/include/configs/ls1088a_common.h @@ -42,7 +42,6 @@ /* I2C */ - /* Serial Port */ #define CFG_SYS_NS16550_CLK (get_bus_freq(0) / 2) @@ -84,11 +83,9 @@ unsigned long long get_qixis_addr(void); #define QIXIS_BASE_PHYS 0x20000000 #define QIXIS_BASE_PHYS_EARLY 0xC000000 - #define CFG_SYS_NAND_BASE 0x530000000ULL #define CFG_SYS_NAND_BASE_PHYS 0x30000000 - /* MC firmware */ /* TODO Actual DPL max length needs to be confirmed with the MC FW team */ #define CFG_SYS_LS_MC_DPC_MAX_LENGTH 0x20000 diff --git a/include/configs/ls1088aqds.h b/include/configs/ls1088aqds.h index 084ee064ae6..36e8422c34d 100644 --- a/include/configs/ls1088aqds.h +++ b/include/configs/ls1088aqds.h @@ -16,7 +16,6 @@ #define SPD_EEPROM_ADDRESS 0x51 - /* * IFC Definitions */ diff --git a/include/configs/ls1088ardb.h b/include/configs/ls1088ardb.h index a1749149e50..8be5febe57b 100644 --- a/include/configs/ls1088ardb.h +++ b/include/configs/ls1088ardb.h @@ -17,7 +17,6 @@ #define SPD_EEPROM_ADDRESS 0x51 - #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI) #define CFG_SYS_NOR0_CSPR_EXT (0x0) #define CFG_SYS_NOR_AMASK IFC_AMASK(128 * 1024 * 1024) diff --git a/include/configs/lx2160a_common.h b/include/configs/lx2160a_common.h index 6f46ca78d4d..4c1b4bf2b2c 100644 --- a/include/configs/lx2160a_common.h +++ b/include/configs/lx2160a_common.h @@ -37,7 +37,6 @@ * will be udpated later when get_bus_freq(0) is available. */ - /* Serial Port */ #define CFG_PL011_CLOCK (get_bus_freq(0) / 4) #define CFG_SYS_SERIAL0 0x21c0000 diff --git a/include/configs/meson64.h b/include/configs/meson64.h index 65fa5f3d6dd..ccb8ea2e716 100644 --- a/include/configs/meson64.h +++ b/include/configs/meson64.h @@ -144,5 +144,4 @@ BOOTENV #endif - #endif /* __MESON64_CONFIG_H */ diff --git a/include/configs/mt8183.h b/include/configs/mt8183.h index 1f973829bba..7c31e219afd 100644 --- a/include/configs/mt8183.h +++ b/include/configs/mt8183.h @@ -11,7 +11,6 @@ #include <linux/sizes.h> - #define CFG_SYS_NS16550_COM1 0x11005200 #define CFG_SYS_NS16550_CLK 26000000 diff --git a/include/configs/mt8516.h b/include/configs/mt8516.h index 73776e3705b..27c3718352d 100644 --- a/include/configs/mt8516.h +++ b/include/configs/mt8516.h @@ -11,7 +11,6 @@ #include <linux/sizes.h> - #define CFG_SYS_NS16550_COM1 0x11005000 #define CFG_SYS_NS16550_CLK 26000000 diff --git a/include/configs/mx53cx9020.h b/include/configs/mx53cx9020.h index e995776d30d..dccfdc3a15d 100644 --- a/include/configs/mx53cx9020.h +++ b/include/configs/mx53cx9020.h @@ -21,7 +21,6 @@ /* bootz: zImage/initrd.img support */ - /* USB Configs */ #define CFG_MXC_USB_PORT 1 #define CFG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) diff --git a/include/configs/mx6ullevk.h b/include/configs/mx6ullevk.h index 2c3cd32cefa..910140ab4b7 100644 --- a/include/configs/mx6ullevk.h +++ b/include/configs/mx6ullevk.h @@ -7,7 +7,6 @@ #ifndef __MX6ULLEVK_CONFIG_H #define __MX6ULLEVK_CONFIG_H - #include <asm/arch/imx-regs.h> #include <linux/sizes.h> #include <linux/stringify.h> diff --git a/include/configs/mx7ulp_evk.h b/include/configs/mx7ulp_evk.h index 5f4cd930623..d1c1202d061 100644 --- a/include/configs/mx7ulp_evk.h +++ b/include/configs/mx7ulp_evk.h @@ -11,7 +11,6 @@ #include <linux/sizes.h> #include <asm/arch/imx-regs.h> - /* Using ULP WDOG for reset */ #define WDOG_BASE_ADDR WDG1_RBASE diff --git a/include/configs/phycore_imx8mm.h b/include/configs/phycore_imx8mm.h index ce6dc87c69c..dd7cfdba52d 100644 --- a/include/configs/phycore_imx8mm.h +++ b/include/configs/phycore_imx8mm.h @@ -63,7 +63,6 @@ #define CFG_SYS_INIT_RAM_ADDR 0x40000000 #define CFG_SYS_INIT_RAM_SIZE SZ_512K - #define CFG_SYS_SDRAM_BASE 0x40000000 #define PHYS_SDRAM 0x40000000 diff --git a/include/configs/phycore_imx8mp.h b/include/configs/phycore_imx8mp.h index 299fabc6a99..47c56b50b16 100644 --- a/include/configs/phycore_imx8mp.h +++ b/include/configs/phycore_imx8mp.h @@ -18,7 +18,6 @@ #define CFG_SYS_INIT_RAM_ADDR 0x40000000 #define CFG_SYS_INIT_RAM_SIZE SZ_512K - #define CFG_SYS_SDRAM_BASE 0x40000000 #define PHYS_SDRAM 0x40000000 diff --git a/include/configs/pico-imx6ul.h b/include/configs/pico-imx6ul.h index 4caa8233758..8a22f0134b3 100644 --- a/include/configs/pico-imx6ul.h +++ b/include/configs/pico-imx6ul.h @@ -7,7 +7,6 @@ #ifndef __PICO_IMX6UL_CONFIG_H #define __PICO_IMX6UL_CONFIG_H - #include <asm/arch/imx-regs.h> #include <linux/sizes.h> #include "mx6_common.h" diff --git a/include/configs/pico-imx8mq.h b/include/configs/pico-imx8mq.h index be31f8a23ca..422b89a3dd3 100644 --- a/include/configs/pico-imx8mq.h +++ b/include/configs/pico-imx8mq.h @@ -65,7 +65,6 @@ #define CFG_SYS_INIT_RAM_ADDR 0x40000000 #define CFG_SYS_INIT_RAM_SIZE 0x80000 - #define CFG_SYS_SDRAM_BASE 0x40000000 #define PHYS_SDRAM 0x40000000 #define PHYS_SDRAM_SIZE 0x80000000 /* 2 GiB DDR */ diff --git a/include/configs/sei510.h b/include/configs/sei510.h index ea91a061577..0f8070b8d31 100644 --- a/include/configs/sei510.h +++ b/include/configs/sei510.h @@ -25,7 +25,6 @@ "name=userdata,size=4820M,uuid=${uuid_gpt_userdata};" \ "name=rootfs,size=-,uuid=" ROOT_UUID - #include <configs/meson64_android.h> #endif /* __CONFIG_H */ diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h index 6b1d5caafb1..74b7fe85800 100644 --- a/include/configs/siemens-am33x-common.h +++ b/include/configs/siemens-am33x-common.h @@ -40,7 +40,6 @@ #define CFG_SYS_NS16550_COM1 0x44e09000 #define CFG_SYS_NS16550_COM4 0x481a6000 - /* I2C Configuration */ /* Defines for SPL */ diff --git a/include/configs/socrates.h b/include/configs/socrates.h index 64cc17ca7ca..006d649f6ed 100644 --- a/include/configs/socrates.h +++ b/include/configs/socrates.h @@ -48,7 +48,6 @@ /* I2C addresses of SPD EEPROMs */ #define SPD_EEPROM_ADDRESS 0x50 /* CTLR 0 DIMM 0 */ - /* Hardcoded values, to use instead of SPD */ #define CFG_SYS_DDR_CS0_BNDS 0x0000000f #define CFG_SYS_DDR_CS0_CONFIG 0x80010102 diff --git a/include/configs/stm32mp15_dh_dhsom.h b/include/configs/stm32mp15_dh_dhsom.h index c1fca8359d2..6fe6e7b9b8c 100644 --- a/include/configs/stm32mp15_dh_dhsom.h +++ b/include/configs/stm32mp15_dh_dhsom.h @@ -53,7 +53,6 @@ "update_sf=run dh_update_sd_to_sf\0" \ "usb_pgood_delay=1000\0" - #include <configs/stm32mp15_common.h> #endif diff --git a/include/configs/stmark2.h b/include/configs/stmark2.h index af5da096b7d..c8a39e191a2 100644 --- a/include/configs/stmark2.h +++ b/include/configs/stmark2.h @@ -95,7 +95,6 @@ #define CACR_STATUS (CFG_SYS_INIT_RAM_ADDR + \ CFG_SYS_INIT_RAM_SIZE - 12) - #define CFG_SYS_I2C_0 #endif /* __STMARK2_CONFIG_H */ diff --git a/include/configs/ten64.h b/include/configs/ten64.h index d2bef9b6e52..d5bb2e96c51 100644 --- a/include/configs/ten64.h +++ b/include/configs/ten64.h @@ -9,7 +9,6 @@ #include "ls1088a_common.h" - #define CFG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000 #define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd" diff --git a/include/configs/topic_miami.h b/include/configs/topic_miami.h index 3795e6152fa..06276175455 100644 --- a/include/configs/topic_miami.h +++ b/include/configs/topic_miami.h @@ -9,7 +9,6 @@ #ifndef __CONFIG_TOPIC_MIAMI_H #define __CONFIG_TOPIC_MIAMI_H - /* Speed up boot time by ignoring the environment which we never used */ #include "zynq-common.h" diff --git a/include/configs/warp7.h b/include/configs/warp7.h index 5d2956a5963..0da9250c3b7 100644 --- a/include/configs/warp7.h +++ b/include/configs/warp7.h @@ -92,7 +92,6 @@ #define CFG_SYS_FSL_USDHC_NUM 1 - #define CFG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) /* USB Device Firmware Update support */ diff --git a/include/configs/x86-common.h b/include/configs/x86-common.h index 8bd0716c08d..d93a45d5aae 100644 --- a/include/configs/x86-common.h +++ b/include/configs/x86-common.h @@ -36,5 +36,4 @@ "ramdisk_addr_r=0x4000000\0" \ "ramdiskfile=initramfs.gz\0" - #endif /* __CONFIG_H */ diff --git a/include/configs/xtfpga.h b/include/configs/xtfpga.h index 9655b666eda..468c5b85ab7 100644 --- a/include/configs/xtfpga.h +++ b/include/configs/xtfpga.h @@ -71,7 +71,6 @@ /* U-Boot autoboot configuration */ /*==============================*/ - /*=========================================*/ /* FPGA Registers (board info and control) */ /*=========================================*/ diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index 553bb1b45b6..03af859c951 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -185,7 +185,6 @@ #define CFG_SYS_INIT_RAM_ADDR 0xFFFF0000 #define CFG_SYS_INIT_RAM_SIZE 0x2000 - /* Extend size of kernel image for uncompression */ /* Address in RAM where the parameters must be copied by SPL. */ -- 2.43.0

2 1

[PATCH v2 0/8] net: tcp: improve tcp support
by Mikhail Kshevetskiy 06 Jul '24

06 Jul '24

This series of patches greatly improve TCP support. The benefits: * a lot of bug was fixed * tcp cliens becomes smaller/simpler * fix data uploading (now it's possible to transmit a huge array of data from the board to external server) * data downloading/uploading with netcat over tcp was added Mikhail Kshevetskiy (9): net/tcp: fix TCP options processing net/tcp: fix selective acknowledge net/tcp: put connection specific data into a tcp_stream structure net/tcp: add connection info to tcp_stream structure net/tcp: rename ack_edge and seq_init to more common rcv_nxt and irs net/tcp: improve tcp framework, use better state machine net/tcp: simplify tcp header filling code net/tcp: define a fallback value for rcv_wnd size net/netcat: add netcat over tcp support cmd/Kconfig | 7 + cmd/net.c | 34 +- include/net.h | 7 +- include/net/netcat.h | 20 + include/net/tcp.h | 227 +++++++- include/net/wget.h | 8 - net/Makefile | 1 + net/fastboot_tcp.c | 190 +++---- net/net.c | 30 +- net/netcat.c | 159 ++++++ net/tcp.c | 1253 +++++++++++++++++++++++++++++------------- net/wget.c | 479 +++++----------- 12 files changed, 1538 insertions(+), 877 deletions(-) create mode 100644 include/net/netcat.h create mode 100644 net/netcat.c -- 2.39.2

3 12

[PULL] Early Qualcomm changes for v2024.10
by Caleb Connolly 05 Jul '24

05 Jul '24

Hi Tom, Various minor fixes and improvements: * Fix Qualcomm SPMI v5 support * Move default environment to a file * Add support for special pins (e.g ufs/mmc reset/data pins) * IPQ moves to OF_UPSTREAM and receives some cleanup and MAINTAINERS changes * Add a reset driver for devices without PSCI * msm8916 USB clock improvements for mobile devices The following changes since commit 7c9c5c0562347dccb8ac89148784a34de402ea9e: Merge patch series "xtensa: Enable qemu-xtensa board" (2024-07-04 16:11:08 -0600) are available in the Git repository at: git@source.denx.de:u-boot/custodians/u-boot-snapdragon.git qcom-main for you to fetch changes up to 69b37f1625ac0c9d0c867d591564af91c0b52d18: spmi: msm: correct max_channels for v5 controllers (2024-07-05 12:07:37 +0200) ---------------------------------------------------------------- Caleb Connolly (4): qcom_defconfig: enable msm8916 and msm8996 spmi: msm: demote to debug() mach-snapdragon: move default environment to a file spmi: msm: correct max_channels for v5 controllers Neil Armstrong (5): pinctrl: qcom: add support for bias-pull-down arm: mach-snapdragon: gpio: introduce msm_special_pin_data pinctrl: qcom: add support setting pin configuration for special pins pinctrl: qcom: sm8550: add special pins pins configuration data pinctrl: qcom: sm8650: add special pins pins configuration data Robert Marko (9): sysreset: add Qualcomm PSHOLD reset driver mach-ipq40xx: add CPU specific code mach-ipq40xx: use OF_UPSTREAM arm: dts: drop downstream IPQ4019 DTSI MAINTAINERS: IPQ40XX: remove Luka Kovacic as maintainer MAINTAINERS: IPQ40XX: update GCC dt-bindings MAINTAINERS: IPQ40XX: add clock-ipq4019 instead of reset driver MAINTAINERS: IPQ40XX: add pinctrl driver clock: qcom: ipq4019: add I2C clocks Sam Day (2): clk/qcom: apq8016: add support for USB_HS clocks ehci: msm: bring up iface + core clocks MAINTAINERS | 7 +- arch/arm/Kconfig | 1 + arch/arm/dts/qcom-ipq4019.dtsi | 202 --------------------------- arch/arm/mach-ipq40xx/Makefile | 7 + arch/arm/mach-ipq40xx/cpu.c | 43 ++++++ arch/arm/mach-snapdragon/include/mach/gpio.h | 16 ++- board/qualcomm/default.env | 11 ++ configs/qcom_defconfig | 6 + drivers/clk/qcom/clock-apq8016.c | 32 +++++ drivers/clk/qcom/clock-ipq4019.c | 21 +++ drivers/pinctrl/qcom/pinctrl-qcom.c | 38 ++++- drivers/pinctrl/qcom/pinctrl-sm8550.c | 42 ++++-- drivers/pinctrl/qcom/pinctrl-sm8650.c | 42 ++++-- drivers/spmi/spmi-msm.c | 6 +- drivers/sysreset/Kconfig | 6 + drivers/sysreset/Makefile | 1 + drivers/sysreset/sysreset_qcom-pshold.c | 55 ++++++++ drivers/usb/host/ehci-msm.c | 37 ++++- include/configs/qcom.h | 7 - 19 files changed, 343 insertions(+), 237 deletions(-) delete mode 100644 arch/arm/dts/qcom-ipq4019.dtsi create mode 100644 arch/arm/mach-ipq40xx/Makefile create mode 100644 arch/arm/mach-ipq40xx/cpu.c create mode 100644 board/qualcomm/default.env create mode 100644 drivers/sysreset/sysreset_qcom-pshold.c

2 1

Please pull u-boot-tegra staging
by Svyatoslav Ryhel 05 Jul '24

05 Jul '24

Dear Tom, The following changes since commit 7c9c5c0562347dccb8ac89148784a34de402ea9e: Merge patch series "xtensa: Enable qemu-xtensa board" (2024-07-04 16:11:08 -0600) are available in the Git repository at: https://source.denx.de/u-boot/custodians/u-boot-tegra.git staging for you to fetch changes up to f6fb6b2608214b3ee2aef955ec18cf97c14f562e: board: lenovo: ideapad-yoga-11: add Lenovo Ideapad Yoga 11 support (2024-07-05 10:18:36 +0300) ---------------------------------------------------------------- Jonas Schwöbel (2): board: microsoft: surface-rt: add Microsoft Surface RT support board: lenovo: ideapad-yoga-11: add Lenovo Ideapad Yoga 11 support Svyatoslav Ryhel (7): configs: paz00: enable EDID support video: tegra20: dc: use nvidia,head property to identify DC controller include: configs: tegra-common-post: make usb first boot target configs: transformer: simplify boot command arm: tegra20: bct: add missing <vsprintf.h> board: asus: transformer: add ASUS Transformer T20 family support board: wexler: qc750: add WEXLER Tab 7t support arch/arm/dts/Makefile | 9 +- arch/arm/dts/tegra20-asus-sl101.dts | 9 + arch/arm/dts/tegra20-asus-tf101.dts | 9 + arch/arm/dts/tegra20-asus-tf101g.dts | 9 + arch/arm/dts/tegra20-asus-transformer.dtsi | 545 +++++++++++++++++++++++++ arch/arm/dts/tegra30-lenovo-ideapad-yoga-11.dts | 1266 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ arch/arm/dts/tegra30-microsoft-surface-rt.dts | 1083 +++++++++++++++++++++++++++++++++++++++++++++++++ arch/arm/dts/tegra30-wexler-qc750.dts | 1106 ++++++++++++++++++++++++++++++++++++++++++++++++++ arch/arm/mach-tegra/tegra20/Kconfig | 5 + arch/arm/mach-tegra/tegra20/bct.c | 1 + arch/arm/mach-tegra/tegra30/Kconfig | 15 + board/asus/transformer-t20/Kconfig | 12 + board/asus/transformer-t20/MAINTAINERS | 8 + board/asus/transformer-t20/Makefile | 9 + board/asus/transformer-t20/configs/sl101.config | 1 + board/asus/transformer-t20/configs/tf101.config | 1 + board/asus/transformer-t20/configs/tf101g.config | 1 + board/asus/transformer-t20/transformer-t20.c | 57 +++ board/lenovo/ideapad-yoga-11/Kconfig | 12 + board/lenovo/ideapad-yoga-11/MAINTAINERS | 7 + board/lenovo/ideapad-yoga-11/Makefile | 6 + board/lenovo/ideapad-yoga-11/ideapad-yoga-11-spl.c | 41 ++ board/microsoft/surface-rt/Kconfig | 12 + board/microsoft/surface-rt/MAINTAINERS | 7 + board/microsoft/surface-rt/Makefile | 6 + board/microsoft/surface-rt/surface-rt-spl.c | 41 ++ board/wexler/qc750/Kconfig | 12 + board/wexler/qc750/MAINTAINERS | 7 + board/wexler/qc750/Makefile | 11 + board/wexler/qc750/qc750-spl.c | 45 +++ board/wexler/qc750/qc750.c | 21 + configs/ideapad-yoga-11_defconfig | 84 ++++ configs/paz00_defconfig | 1 + configs/qc750_defconfig | 81 ++++ configs/surface-rt_defconfig | 80 ++++ configs/transformer_t20_defconfig | 82 ++++ configs/transformer_t30_defconfig | 2 +- doc/board/asus/index.rst | 1 + doc/board/asus/transformer_t20.rst | 129 ++++++ doc/board/index.rst | 3 + doc/board/lenovo/ideapad-yoga-11.rst | 41 ++ doc/board/lenovo/index.rst | 9 + doc/board/microsoft/index.rst | 9 + doc/board/microsoft/surface-rt.rst | 41 ++ doc/board/wexler/index.rst | 9 + doc/board/wexler/qc750.rst | 125 ++++++ drivers/video/tegra20/tegra-dc.c | 6 +- drivers/video/tegra20/tegra-dc.h | 4 +- include/configs/ideapad-yoga-11.h | 77 ++++ include/configs/qc750.h | 65 +++ include/configs/surface-rt.h | 39 ++ include/configs/tegra-common-post.h | 2 +- include/configs/transformer-t20.h | 21 + 53 files changed, 5275 insertions(+), 10 deletions(-) create mode 100644 arch/arm/dts/tegra20-asus-sl101.dts create mode 100644 arch/arm/dts/tegra20-asus-tf101.dts create mode 100644 arch/arm/dts/tegra20-asus-tf101g.dts create mode 100644 arch/arm/dts/tegra20-asus-transformer.dtsi create mode 100644 arch/arm/dts/tegra30-lenovo-ideapad-yoga-11.dts create mode 100644 arch/arm/dts/tegra30-microsoft-surface-rt.dts create mode 100644 arch/arm/dts/tegra30-wexler-qc750.dts create mode 100644 board/asus/transformer-t20/Kconfig create mode 100644 board/asus/transformer-t20/MAINTAINERS create mode 100644 board/asus/transformer-t20/Makefile create mode 100644 board/asus/transformer-t20/configs/sl101.config create mode 100644 board/asus/transformer-t20/configs/tf101.config create mode 100644 board/asus/transformer-t20/configs/tf101g.config create mode 100644 board/asus/transformer-t20/transformer-t20.c create mode 100644 board/lenovo/ideapad-yoga-11/Kconfig create mode 100644 board/lenovo/ideapad-yoga-11/MAINTAINERS create mode 100644 board/lenovo/ideapad-yoga-11/Makefile create mode 100644 board/lenovo/ideapad-yoga-11/ideapad-yoga-11-spl.c create mode 100644 board/microsoft/surface-rt/Kconfig create mode 100644 board/microsoft/surface-rt/MAINTAINERS create mode 100644 board/microsoft/surface-rt/Makefile create mode 100644 board/microsoft/surface-rt/surface-rt-spl.c create mode 100644 board/wexler/qc750/Kconfig create mode 100644 board/wexler/qc750/MAINTAINERS create mode 100644 board/wexler/qc750/Makefile create mode 100644 board/wexler/qc750/qc750-spl.c create mode 100644 board/wexler/qc750/qc750.c create mode 100644 configs/ideapad-yoga-11_defconfig create mode 100644 configs/qc750_defconfig create mode 100644 configs/surface-rt_defconfig create mode 100644 configs/transformer_t20_defconfig create mode 100644 doc/board/asus/transformer_t20.rst create mode 100644 doc/board/lenovo/ideapad-yoga-11.rst create mode 100644 doc/board/lenovo/index.rst create mode 100644 doc/board/microsoft/index.rst create mode 100644 doc/board/microsoft/surface-rt.rst create mode 100644 doc/board/wexler/index.rst create mode 100644 doc/board/wexler/qc750.rst create mode 100644 include/configs/ideapad-yoga-11.h create mode 100644 include/configs/qc750.h create mode 100644 include/configs/surface-rt.h create mode 100644 include/configs/transformer-t20.h Branch contains minor improvemets for existing tegra devices along with bring up of 4 new devices (ASUS Transformers T20, Microsoft Surface RT, Lenovo Ideapad Yoga 11 and WEXLER Tab 7t). All commits passed U-Boot CI. Thanks, Svyatoslav Ryhel.

2 1

[PATCH V3 0/4] Low Power Mode: Pakage TIFS Stub on BeaglePlay
by Dhruva Gole 05 Jul '24

05 Jul '24

This series includes the binman related changes required to package tIFS Stub to support Low Power Modes on BeaglePlay. Also, based on comments from previous patch [0] documentation has been added to describe small addition in boot flow as well as tispl image format. I am aware that the new boot flow image will need to be updated in other places like am62a, am62p and even other boards that use am62x. However, I would like to keep this series beagleplay TIFSStub specific and so I will be sending a follow up series to update other places seperately if that's ok. Changelog: * Add new image format for TISPL * Add new changes in boot flow for am62 family of devices. [0] https://lore.kernel.org/u-boot/20240618045610.271884-1-d-gole@ti.com/ Dhruva Gole (4): arm: dts: k3-am625-beagleplay: Package TIFS Stub doc: beagle: am62x_beagleplay: Update the boot flow to show TIFS Stub doc: beagle: am62x_beagleplay: Add TIFS Stub in image format doc: ti: k3: Add TIFS Stub documentation arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi | 33 +++++++++++++++++++- doc/board/beagle/am62x_beagleplay.rst | 4 +-- doc/board/ti/img/boot_diagram_am62.svg | 4 +++ doc/board/ti/img/tifsstub_dm_tispl.bin.svg | 4 +++ doc/board/ti/k3.rst | 5 +++ 5 files changed, 47 insertions(+), 3 deletions(-) create mode 100644 doc/board/ti/img/boot_diagram_am62.svg create mode 100644 doc/board/ti/img/tifsstub_dm_tispl.bin.svg base-commit: c53b344475734d0d29f522b7b1d80c5b8204442d -- 2.34.1

3 13