May 2024 - U-Boot

[PATCH] arm: mach-k3: am642: Provide a way to obtain boot device for non SPLs
by Wadim Egorov 10 May '24

10 May '24

Let's provide get_boot_device() for AM64, similar to what we did in commit 2f9095e2bf59 ("arm: mach-k3: am625: Provide a way to obtain boot device for non SPLs") for AM62. Signed-off-by: Wadim Egorov <w.egorov(a)phytec.de> --- arch/arm/mach-k3/Makefile | 1 + arch/arm/mach-k3/am642_init.c | 92 +--------------------------- arch/arm/mach-k3/am64x/Makefile | 2 + arch/arm/mach-k3/am64x/boot.c | 105 ++++++++++++++++++++++++++++++++ 4 files changed, 109 insertions(+), 91 deletions(-) create mode 100644 arch/arm/mach-k3/am64x/Makefile create mode 100644 arch/arm/mach-k3/am64x/boot.c diff --git a/arch/arm/mach-k3/Makefile b/arch/arm/mach-k3/Makefile index 1bd523329a4..3101f57d324 100644 --- a/arch/arm/mach-k3/Makefile +++ b/arch/arm/mach-k3/Makefile @@ -26,3 +26,4 @@ obj-$(CONFIG_SOC_K3_AM62P5) += am62p5_init.o endif obj-y += common.o security.o obj-$(CONFIG_SOC_K3_AM625) += am62x/ +obj-$(CONFIG_SOC_K3_AM642) += am64x/ diff --git a/arch/arm/mach-k3/am642_init.c b/arch/arm/mach-k3/am642_init.c index ddf47ef0a9b..feadad8c5a8 100644 --- a/arch/arm/mach-k3/am642_init.c +++ b/arch/arm/mach-k3/am642_init.c @@ -285,97 +285,7 @@ u32 spl_mmc_boot_mode(struct mmc *mmc, const u32 boot_device) } } -static u32 __get_backup_bootmedia(u32 main_devstat) -{ - u32 bkup_bootmode = - (main_devstat & MAIN_DEVSTAT_BACKUP_BOOTMODE_MASK) >> - MAIN_DEVSTAT_BACKUP_BOOTMODE_SHIFT; - u32 bkup_bootmode_cfg = - (main_devstat & MAIN_DEVSTAT_BACKUP_BOOTMODE_CFG_MASK) >> - MAIN_DEVSTAT_BACKUP_BOOTMODE_CFG_SHIFT; - - switch (bkup_bootmode) { - case BACKUP_BOOT_DEVICE_UART: - return BOOT_DEVICE_UART; - - case BACKUP_BOOT_DEVICE_DFU: - if (bkup_bootmode_cfg & MAIN_DEVSTAT_BACKUP_USB_MODE_MASK) - return BOOT_DEVICE_USB; - return BOOT_DEVICE_DFU; - - - case BACKUP_BOOT_DEVICE_ETHERNET: - return BOOT_DEVICE_ETHERNET; - - case BACKUP_BOOT_DEVICE_MMC: - if (bkup_bootmode_cfg) - return BOOT_DEVICE_MMC2; - return BOOT_DEVICE_MMC1; - - case BACKUP_BOOT_DEVICE_SPI: - return BOOT_DEVICE_SPI; - - case BACKUP_BOOT_DEVICE_I2C: - return BOOT_DEVICE_I2C; - }; - - return BOOT_DEVICE_RAM; -} - -static u32 __get_primary_bootmedia(u32 main_devstat) -{ - u32 bootmode = (main_devstat & MAIN_DEVSTAT_PRIMARY_BOOTMODE_MASK) >> - MAIN_DEVSTAT_PRIMARY_BOOTMODE_SHIFT; - u32 bootmode_cfg = - (main_devstat & MAIN_DEVSTAT_PRIMARY_BOOTMODE_CFG_MASK) >> - MAIN_DEVSTAT_PRIMARY_BOOTMODE_CFG_SHIFT; - - switch (bootmode) { - case BOOT_DEVICE_OSPI: - fallthrough; - case BOOT_DEVICE_QSPI: - fallthrough; - case BOOT_DEVICE_XSPI: - fallthrough; - case BOOT_DEVICE_SPI: - return BOOT_DEVICE_SPI; - - case BOOT_DEVICE_ETHERNET_RGMII: - fallthrough; - case BOOT_DEVICE_ETHERNET_RMII: - return BOOT_DEVICE_ETHERNET; - - case BOOT_DEVICE_EMMC: - return BOOT_DEVICE_MMC1; - - case BOOT_DEVICE_NAND: - return BOOT_DEVICE_NAND; - - case BOOT_DEVICE_MMC: - if ((bootmode_cfg & MAIN_DEVSTAT_PRIMARY_MMC_PORT_MASK) >> - MAIN_DEVSTAT_PRIMARY_MMC_PORT_SHIFT) - return BOOT_DEVICE_MMC2; - return BOOT_DEVICE_MMC1; - - case BOOT_DEVICE_DFU: - if ((bootmode_cfg & MAIN_DEVSTAT_PRIMARY_USB_MODE_MASK) >> - MAIN_DEVSTAT_PRIMARY_USB_MODE_SHIFT) - return BOOT_DEVICE_USB; - return BOOT_DEVICE_DFU; - - case BOOT_DEVICE_NOBOOT: - return BOOT_DEVICE_RAM; - } - - return bootmode; -} - u32 spl_boot_device(void) { - u32 devstat = readl(CTRLMMR_MAIN_DEVSTAT); - - if (bootindex == K3_PRIMARY_BOOTMODE) - return __get_primary_bootmedia(devstat); - else - return __get_backup_bootmedia(devstat); + return get_boot_device(); } diff --git a/arch/arm/mach-k3/am64x/Makefile b/arch/arm/mach-k3/am64x/Makefile new file mode 100644 index 00000000000..acf09c3426c --- /dev/null +++ b/arch/arm/mach-k3/am64x/Makefile @@ -0,0 +1,2 @@ +# SPDX-License-Identifier: GPL-2.0+ +obj-y += boot.o diff --git a/arch/arm/mach-k3/am64x/boot.c b/arch/arm/mach-k3/am64x/boot.c new file mode 100644 index 00000000000..ce8ae941be6 --- /dev/null +++ b/arch/arm/mach-k3/am64x/boot.c @@ -0,0 +1,105 @@ +// SPDX-License-Identifier: GPL-2.0+ +#include <asm/io.h> +#include <asm/arch/hardware.h> +#include <asm/arch/spl.h> + +static u32 __get_backup_bootmedia(u32 main_devstat) +{ + u32 bkup_bootmode = + (main_devstat & MAIN_DEVSTAT_BACKUP_BOOTMODE_MASK) >> + MAIN_DEVSTAT_BACKUP_BOOTMODE_SHIFT; + u32 bkup_bootmode_cfg = + (main_devstat & MAIN_DEVSTAT_BACKUP_BOOTMODE_CFG_MASK) >> + MAIN_DEVSTAT_BACKUP_BOOTMODE_CFG_SHIFT; + + switch (bkup_bootmode) { + case BACKUP_BOOT_DEVICE_UART: + return BOOT_DEVICE_UART; + + case BACKUP_BOOT_DEVICE_DFU: + if (bkup_bootmode_cfg & MAIN_DEVSTAT_BACKUP_USB_MODE_MASK) + return BOOT_DEVICE_USB; + return BOOT_DEVICE_DFU; + + case BACKUP_BOOT_DEVICE_ETHERNET: + return BOOT_DEVICE_ETHERNET; + + case BACKUP_BOOT_DEVICE_MMC: + if (bkup_bootmode_cfg) + return BOOT_DEVICE_MMC2; + return BOOT_DEVICE_MMC1; + + case BACKUP_BOOT_DEVICE_SPI: + return BOOT_DEVICE_SPI; + + case BACKUP_BOOT_DEVICE_I2C: + return BOOT_DEVICE_I2C; + }; + + return BOOT_DEVICE_RAM; +} + +static u32 __get_primary_bootmedia(u32 main_devstat) +{ + u32 bootmode = (main_devstat & MAIN_DEVSTAT_PRIMARY_BOOTMODE_MASK) >> + MAIN_DEVSTAT_PRIMARY_BOOTMODE_SHIFT; + u32 bootmode_cfg = + (main_devstat & MAIN_DEVSTAT_PRIMARY_BOOTMODE_CFG_MASK) >> + MAIN_DEVSTAT_PRIMARY_BOOTMODE_CFG_SHIFT; + + switch (bootmode) { + case BOOT_DEVICE_OSPI: + fallthrough; + case BOOT_DEVICE_QSPI: + fallthrough; + case BOOT_DEVICE_XSPI: + fallthrough; + case BOOT_DEVICE_SPI: + return BOOT_DEVICE_SPI; + + case BOOT_DEVICE_ETHERNET_RGMII: + fallthrough; + case BOOT_DEVICE_ETHERNET_RMII: + return BOOT_DEVICE_ETHERNET; + + case BOOT_DEVICE_EMMC: + return BOOT_DEVICE_MMC1; + + case BOOT_DEVICE_NAND: + return BOOT_DEVICE_NAND; + + case BOOT_DEVICE_MMC: + if ((bootmode_cfg & MAIN_DEVSTAT_PRIMARY_MMC_PORT_MASK) >> + MAIN_DEVSTAT_PRIMARY_MMC_PORT_SHIFT) + return BOOT_DEVICE_MMC2; + return BOOT_DEVICE_MMC1; + + case BOOT_DEVICE_DFU: + if ((bootmode_cfg & MAIN_DEVSTAT_PRIMARY_USB_MODE_MASK) >> + MAIN_DEVSTAT_PRIMARY_USB_MODE_SHIFT) + return BOOT_DEVICE_USB; + return BOOT_DEVICE_DFU; + + case BOOT_DEVICE_NOBOOT: + return BOOT_DEVICE_RAM; + } + + return bootmode; +} + +u32 get_boot_device(void) +{ + u32 devstat = readl(CTRLMMR_MAIN_DEVSTAT); + u32 bootmode = *(u32 *)(CONFIG_SYS_K3_BOOT_PARAM_TABLE_INDEX); + u32 bootmedia; + + if (bootmode == K3_PRIMARY_BOOTMODE) + bootmedia = __get_primary_bootmedia(devstat); + else + bootmedia = __get_backup_bootmedia(devstat); + + debug("%s: devstat = 0x%x bootmedia = 0x%x bootmode = %d\n", + __func__, devstat, bootmedia, bootmode); + + return bootmedia; +} -- 2.34.1

2 1

[PATCH 0/4] Clean-up patch set for MbedTLS integration
by Raymond Mao 10 May '24

10 May '24

This patch set is picked from the previously posted serie: "[RFC] Integrate MbedTLS v3.6 LTS with U-Boot" They are not directly related to MbedTLS integration, but the prerequisite for a few clean-up, refactoring and minor fixes. Raymond Mao (4): image: remove redundant hash includes efi_loader: remove redundant hash includes md5: Use typedef for MD5 context arm: EFI linker script text section alignment arch/arm/lib/elf_aarch64_efi.lds | 1 + boot/image-fit.c | 4 ---- boot/image.c | 2 -- drivers/crypto/hash/hash_sw.c | 8 ++++---- include/u-boot/md5.h | 10 +++++----- lib/efi_loader/efi_signature.c | 1 - lib/efi_loader/efi_tcg2.c | 3 --- lib/md5.c | 10 +++++----- 8 files changed, 15 insertions(+), 24 deletions(-) -- 2.25.1

3 12

imx8mp: Flashing U-Boot into eMMC hardware partition via UUU
by Fabio Estevam 10 May '24

10 May '24

Hi, I am using an imx8mp-evk board and I can flash the U-Boot into the eMMC hardware partition 0 by running: => tftpboot $loadaddr flash.bin => setexpr blkcnt $filesize + 0x1ff && setexpr blkcnt $blkcnt / 0x200 => mmc dev 2 1 => mmc write $loadaddr 0 $blkcnt Now I want to do the same via UUU. I tried to create a script called emmc_flash: uuu_version 1.5.21 SDPS: boot -f flash.bin SDPS: done FB: ucmd setenv fastboot_dev mmc FB: ucmd mmc dev 2 1 FB: flash bootloader flash.bin FB: Done Then on the PC: uuu emmc_flash U-Boot is loaded to RAM, but the eMMC hardware partition is not programmed. What is the correct script for doing this? Any suggestions? Thanks

2 3

[RFC] pci: mediatek: add PCIe controller support for Filogic
by Frank Wunderlich 10 May '24

10 May '24

From: John Crispin <john(a)phrozen.org> This adds PCIe controller support for the MediaTek Filogic family.. Signed-off-by: John Crispin <john(a)phrozen.org> Signed-off-by: Frank Wunderlich <frank-w(a)public-files.de> --- Note for mt7988: pcie2 needs a dedicated phy which has no driver in uboot yet, so this pcie port is not enabled in the board device- trees. Note for mt7981: i have no board and have no dts nodes yet for it, so only clock change first. --- arch/arm/dts/mt7986.dtsi | 46 +++ arch/arm/dts/mt7988-rfb.dts | 12 + arch/arm/dts/mt7988-sd-rfb.dts | 12 + arch/arm/dts/mt7988.dtsi | 164 +++++++++++ drivers/clk/mediatek/clk-mt7986.c | 5 +- drivers/pci/Kconfig | 7 + drivers/pci/Makefile | 1 + drivers/pci/pcie_mediatek_gen3.c | 382 +++++++++++++++++++++++++ include/dt-bindings/clock/mt7981-clk.h | 3 +- include/dt-bindings/clock/mt7986-clk.h | 3 +- 10 files changed, 631 insertions(+), 4 deletions(-) create mode 100644 drivers/pci/pcie_mediatek_gen3.c diff --git a/arch/arm/dts/mt7986.dtsi b/arch/arm/dts/mt7986.dtsi index c9aeeaca2b11..9a9b0b64cc68 100644 --- a/arch/arm/dts/mt7986.dtsi +++ b/arch/arm/dts/mt7986.dtsi @@ -375,5 +375,51 @@ #phy-cells = <1>; status = "okay"; }; + + pcie_port: pcie-phy@11c00000 { + reg = <0x11c00000 0x20000>; + clocks = <&dummy_clk>; + clock-names = "ref"; + #phy-cells = <1>; + status = "okay"; + }; + }; + + pcie: pcie@11280000 { + compatible = "mediatek,mt7986-pcie", + "mediatek,mt8192-pcie"; + device_type = "pci"; + reg = <0x11280000 0x4000>; + reg-names = "pcie-mac"; + #address-cells = <3>; + #size-cells = <2>; + + clocks = <&infracfg_ao CK_INFRA_IPCIE_PIPE_CK>, + <&infracfg_ao CK_INFRA_IPCIE_CK>, + <&infracfg_ao CK_INFRA_IPCIER_CK>, + <&infracfg_ao CK_INFRA_IPCIEB_CK>; + clock-names = "pl_250m", "tl_26m", "peri_26m", "top_133m"; + + bus-range = <0x00 0xff>; + ranges = <0x82000000 0 0x20000000 0x20000000 0 0x10000000>; + + interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <2>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc 0>, /* INTA */ + <0 0 0 2 &pcie_intc 1>, /* INTB */ + <0 0 0 3 &pcie_intc 2>, /* INTC */ + <0 0 0 4 &pcie_intc 3>; /* INTD */ + + phy-names = "pcie-phy"; + phys = <&pcie_port PHY_TYPE_PCIE>; + + status = "okay"; + + pcie_intc: legacy-interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; }; }; diff --git a/arch/arm/dts/mt7988-rfb.dts b/arch/arm/dts/mt7988-rfb.dts index 2c1142843091..2f0d00b6950b 100644 --- a/arch/arm/dts/mt7988-rfb.dts +++ b/arch/arm/dts/mt7988-rfb.dts @@ -180,3 +180,15 @@ non-removable; status = "okay"; }; + +&pcie0 { + status = "okay"; +}; + +&pcie1 { + status = "okay"; +}; + +&pcie3 { + status = "okay"; +}; diff --git a/arch/arm/dts/mt7988-sd-rfb.dts b/arch/arm/dts/mt7988-sd-rfb.dts index a3df37d252de..0a3eb5360d21 100644 --- a/arch/arm/dts/mt7988-sd-rfb.dts +++ b/arch/arm/dts/mt7988-sd-rfb.dts @@ -132,3 +132,15 @@ vqmmc-supply = <&reg_3p3v>; status = "okay"; }; + +&pcie0 { + status = "okay"; +}; + +&pcie1 { + status = "okay"; +}; + +&pcie3 { + status = "okay"; +}; diff --git a/arch/arm/dts/mt7988.dtsi b/arch/arm/dts/mt7988.dtsi index ac476d5cdd7f..b2e2724732fc 100644 --- a/arch/arm/dts/mt7988.dtsi +++ b/arch/arm/dts/mt7988.dtsi @@ -194,6 +194,152 @@ status = "okay"; }; + pcie2: pcie@11280000 { + compatible = "mediatek,mt7988-pcie", + "mediatek,mt7986-pcie", + "mediatek,mt8192-pcie"; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + reg = <0 0x11280000 0 0x2000>; + reg-names = "pcie-mac"; + linux,pci-domain = <3>; + interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; + bus-range = <0x00 0xff>; + ranges = <0x82000000 0 0x20200000 0 0x20200000 0 0x07e00000>; + clocks = <&infracfg_ao_cgs CK_INFRA_PCIE_PIPE_P2>, + <&infracfg_ao_cgs CK_INFRA_PCIE_GFMUX_TL_P2>, + <&infracfg_ao_cgs CK_INFRA_PCIE_PERI_26M_CK_P2>, + <&infracfg_ao_cgs CK_INFRA_133M_PCIE_CK_P2>; + clock-names = "pl_250m", "tl_26m", "peri_26m", + "top_133m"; + phys = <&xphyu3port0 PHY_TYPE_PCIE>; + phy-names = "pcie-phy"; + + status = "disabled"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &pcie_intc2 0>, + <0 0 0 2 &pcie_intc2 1>, + <0 0 0 3 &pcie_intc2 2>, + <0 0 0 4 &pcie_intc2 3>; + + pcie_intc2: interrupt-controller { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + }; + }; + + pcie3: pcie@11290000 { + compatible = "mediatek,mt7988-pcie", + "mediatek,mt7986-pcie", + "mediatek,mt8192-pcie"; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + reg = <0 0x11290000 0 0x2000>; + reg-names = "pcie-mac"; + linux,pci-domain = <2>; + interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>; + bus-range = <0x00 0xff>; + ranges = <0x82000000 0 0x28200000 0 0x28200000 0 0x07e00000>; + clocks = <&infracfg_ao_cgs CK_INFRA_PCIE_PIPE_P3>, + <&infracfg_ao_cgs CK_INFRA_PCIE_GFMUX_TL_P3>, + <&infracfg_ao_cgs CK_INFRA_PCIE_PERI_26M_CK_P3>, + <&infracfg_ao_cgs CK_INFRA_133M_PCIE_CK_P3>; + clock-names = "pl_250m", "tl_26m", "peri_26m", + "top_133m"; + use-dedicated-phy; + + status = "disabled"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &pcie_intc3 0>, + <0 0 0 2 &pcie_intc3 1>, + <0 0 0 3 &pcie_intc3 2>, + <0 0 0 4 &pcie_intc3 3>; + pcie_intc3: interrupt-controller { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + }; + }; + + pcie0: pcie@11300000 { + compatible = "mediatek,mt7988-pcie", + "mediatek,mt7986-pcie", + "mediatek,mt8192-pcie"; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + reg = <0 0x11300000 0 0x2000>; + reg-names = "pcie-mac"; + linux,pci-domain = <0>; + interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; + bus-range = <0x00 0xff>; + ranges = <0x82000000 0 0x30200000 0 0x30200000 0 0x07e00000>; + clocks = <&infracfg_ao_cgs CK_INFRA_PCIE_PIPE_P0>, + <&infracfg_ao_cgs CK_INFRA_PCIE_GFMUX_TL_P0>, + <&infracfg_ao_cgs CK_INFRA_PCIE_PERI_26M_CK_P0>, + <&infracfg_ao_cgs CK_INFRA_133M_PCIE_CK_P0>; + clock-names = "pl_250m", "tl_26m", "peri_26m", + "top_133m"; + use-dedicated-phy; + + status = "disabled"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &pcie_intc0 0>, + <0 0 0 2 &pcie_intc0 1>, + <0 0 0 3 &pcie_intc0 2>, + <0 0 0 4 &pcie_intc0 3>; + pcie_intc0: interrupt-controller { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + }; + }; + + pcie1: pcie@11310000 { + compatible = "mediatek,mt7988-pcie", + "mediatek,mt7986-pcie", + "mediatek,mt8192-pcie"; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + reg = <0 0x11310000 0 0x2000>; + reg-names = "pcie-mac"; + linux,pci-domain = <1>; + interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; + bus-range = <0x00 0xff>; + ranges = <0x82000000 0 0x38200000 0 0x38200000 0 0x07e00000>; + clocks = <&infracfg_ao_cgs CK_INFRA_PCIE_PIPE_P1>, + <&infracfg_ao_cgs CK_INFRA_PCIE_GFMUX_TL_P1>, + <&infracfg_ao_cgs CK_INFRA_PCIE_PERI_26M_CK_P1>, + <&infracfg_ao_cgs CK_INFRA_133M_PCIE_CK_P1>; + clock-names = "pl_250m", "tl_26m", "peri_26m", + "top_133m"; + use-dedicated-phy; + + status = "disabled"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &pcie_intc1 0>, + <0 0 0 2 &pcie_intc1 1>, + <0 0 0 3 &pcie_intc1 2>, + <0 0 0 4 &pcie_intc1 3>; + pcie_intc1: interrupt-controller { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + }; + }; + usbtphy: usb-phy@11c50000 { compatible = "mediatek,mt7988", "mediatek,generic-tphy-v2"; @@ -219,6 +365,24 @@ mediatek,usb3-pll-ssc-delta1; status = "okay"; }; + + }; + + xphy: xphy@11e10000 { + compatible = "mediatek,mt7988", + "mediatek,xsphy"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + xphyu3port0: usb-phy@11e13000 { + reg = <0 0x11e13400 0 0x500>; + clocks = <&dummy_clk>; + clock-names = "ref"; + #phy-cells = <1>; + status = "okay"; + }; }; xfi_pextp0: syscon@11f20000 { diff --git a/drivers/clk/mediatek/clk-mt7986.c b/drivers/clk/mediatek/clk-mt7986.c index b3fa63fc0ab4..93e02cd23ac1 100644 --- a/drivers/clk/mediatek/clk-mt7986.c +++ b/drivers/clk/mediatek/clk-mt7986.c @@ -504,8 +504,9 @@ static const struct mtk_gate infracfg_ao_gates[] = { GATE_INFRA2(CK_INFRA_IUSB_SYS_CK, "infra_iusb_sys", CK_INFRA_USB_SYS_CK, 2), GATE_INFRA2(CK_INFRA_IUSB_CK, "infra_iusb", CK_INFRA_USB_CK, 3), - GATE_INFRA2(CK_INFRA_IPCIE_CK, "infra_ipcie", CK_INFRA_PCIE_CK, 13), - GATE_INFRA2(CK_INFRA_IPCIER_CK, "infra_ipcier", CK_INFRA_F26M_CK0, 15), + GATE_INFRA2(CK_INFRA_IPCIE_CK, "infra_ipcie", CK_INFRA_PCIE_CK, 12), + GATE_INFRA2(CK_INFRA_IPCIE_PIPE_CK, "infra_ipcie_pipe", CK_INFRA_PCIE_CK, 13), + GATE_INFRA2(CK_INFRA_IPCIER_CK, "infra_ipcier", CK_INFRA_F26M_CK0, 14), GATE_INFRA2(CK_INFRA_IPCIEB_CK, "infra_ipcieb", CK_INFRA_133M_PHCK, 15), }; diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig index 463ec47eb92d..f62a9844b1ef 100644 --- a/drivers/pci/Kconfig +++ b/drivers/pci/Kconfig @@ -350,6 +350,13 @@ config PCIE_MEDIATEK Say Y here if you want to enable Gen2 PCIe controller, which could be found on MT7623 SoC family. +config PCIE_MEDIATEK_GEN3 + bool "MediaTek PCIe Gen3 controller" + depends on ARCH_MEDIATEK + help + Say Y here if you want to enable Gen3 PCIe controller, + which could be found on the Mediatek Filogic SoC family. + config PCIE_DW_MESON bool "Amlogic Meson DesignWare based PCIe controller" depends on ARCH_MESON diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile index 72ef8b4bc772..aa254a2f4338 100644 --- a/drivers/pci/Makefile +++ b/drivers/pci/Makefile @@ -42,6 +42,7 @@ obj-$(CONFIG_PCIE_INTEL_FPGA) += pcie_intel_fpga.o obj-$(CONFIG_PCIE_DW_COMMON) += pcie_dw_common.o obj-$(CONFIG_PCI_KEYSTONE) += pcie_dw_ti.o obj-$(CONFIG_PCIE_MEDIATEK) += pcie_mediatek.o +obj-$(CONFIG_PCIE_MEDIATEK_GEN3) += pcie_mediatek_gen3.o obj-$(CONFIG_PCIE_ROCKCHIP) += pcie_rockchip.o obj-$(CONFIG_PCIE_DW_ROCKCHIP) += pcie_dw_rockchip.o obj-$(CONFIG_PCIE_DW_MESON) += pcie_dw_meson.o diff --git a/drivers/pci/pcie_mediatek_gen3.c b/drivers/pci/pcie_mediatek_gen3.c new file mode 100644 index 000000000000..a273ea123aaa --- /dev/null +++ b/drivers/pci/pcie_mediatek_gen3.c @@ -0,0 +1,382 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * MediaTek PCIe host controller driver. + * + * Copyright (c) 2023 John Crispin <john(a)phrozen.org> + * Driver is based on u-boot gen1/2 and upstream linux gen3 code + */ + +#include <clk.h> +#include <dm.h> +#include <generic-phy.h> +#include <log.h> +#include <malloc.h> +#include <pci.h> +#include <reset.h> +#include <asm/io.h> +#include <dm/devres.h> +#include <linux/bitops.h> +#include <linux/iopoll.h> +#include <linux/list.h> +#include "pci_internal.h" + +/* PCIe shared registers */ +#define PCIE_CFG_ADDR 0x20 +#define PCIE_CFG_DATA 0x24 + +#define PCIE_SETTING_REG 0x80 + +#define PCIE_PCI_IDS_1 0x9c +#define PCIE_RC_MODE BIT(0) +#define PCI_CLASS(class) (class << 8) + +#define PCIE_CFGNUM_REG 0x140 +#define PCIE_CFG_DEVFN(devfn) ((devfn) & GENMASK(7, 0)) +#define PCIE_CFG_BUS(bus) (((bus) << 8) & GENMASK(15, 8)) +#define PCIE_CFG_BYTE_EN(bytes) (((bytes) << 16) & GENMASK(19, 16)) +#define PCIE_CFG_FORCE_BYTE_EN BIT(20) +#define PCIE_CFG_OFFSET_ADDR 0x1000 +#define PCIE_CFG_HEADER(bus, devfn) (PCIE_CFG_BUS(bus) | PCIE_CFG_DEVFN(devfn)) + +#define PCIE_RST_CTRL_REG 0x148 +#define PCIE_MAC_RSTB BIT(0) +#define PCIE_PHY_RSTB BIT(1) +#define PCIE_BRG_RSTB BIT(2) +#define PCIE_PE_RSTB BIT(3) + +#define PCIE_LINK_STATUS_REG 0x154 +#define PCIE_PORT_LINKUP BIT(8) + +#define PCIE_INT_ENABLE_REG 0x180 + +#define PCIE_MISC_CTRL_REG 0x348 +#define PCIE_DISABLE_DVFSRC_VLT_REQ BIT(1) + +#define PCIE_TRANS_TABLE_BASE_REG 0x800 +#define PCIE_ATR_SRC_ADDR_MSB_OFFSET 0x4 +#define PCIE_ATR_TRSL_ADDR_LSB_OFFSET 0x8 +#define PCIE_ATR_TRSL_ADDR_MSB_OFFSET 0xc +#define PCIE_ATR_TRSL_PARAM_OFFSET 0x10 +#define PCIE_ATR_TLB_SET_OFFSET 0x20 + +#define PCIE_MAX_TRANS_TABLES 8 +#define PCIE_ATR_EN BIT(0) +#define PCIE_ATR_SIZE(size) \ + (((((size) - 1) << 1) & GENMASK(6, 1)) | PCIE_ATR_EN) +#define PCIE_ATR_ID(id) ((id) & GENMASK(3, 0)) +#define PCIE_ATR_TYPE_MEM PCIE_ATR_ID(0) +#define PCIE_ATR_TYPE_IO PCIE_ATR_ID(1) +#define PCIE_ATR_TLP_TYPE(type) (((type) << 16) & GENMASK(18, 16)) +#define PCIE_ATR_TLP_TYPE_MEM PCIE_ATR_TLP_TYPE(0) +#define PCIE_ATR_TLP_TYPE_IO PCIE_ATR_TLP_TYPE(2) + +struct mtk_pcie { + void __iomem *base; + void *priv; + struct clk pl_250m_ck; + struct clk tl_26m_ck; + struct clk peri_26m_ck; + struct clk top_133m_ck; + struct reset_ctl reset_phy; + struct reset_ctl reset_mac; + bool use_dedicated_phy; + struct phy phy; +}; + +static void mtk_pcie_config_tlp_header(const struct udevice *bus, + pci_dev_t devfn, + int where, int size) +{ + struct mtk_pcie *pcie = dev_get_priv(bus); + int bytes; + u32 val; + + size = 1 << size; + bytes = (GENMASK(size - 1, 0) & 0xf) << (where & 0x3); + + val = PCIE_CFG_FORCE_BYTE_EN | PCIE_CFG_BYTE_EN(bytes) | + PCIE_CFG_HEADER(PCI_BUS(devfn), (devfn >> 8)); + + writel(val, pcie->base + PCIE_CFGNUM_REG); +} + +static int mtk_pcie_config_address(const struct udevice *udev, pci_dev_t bdf, + uint offset, void **paddress) +{ + struct mtk_pcie *pcie = dev_get_priv(udev); + + *paddress = pcie->base + PCIE_CFG_OFFSET_ADDR + offset; + + return 0; +} + +static int mtk_pcie_read_config(const struct udevice *bus, pci_dev_t bdf, + uint offset, ulong *valuep, + enum pci_size_t size) +{ + int ret; + + mtk_pcie_config_tlp_header(bus, bdf, offset, size); + ret = pci_generic_mmap_read_config(bus, mtk_pcie_config_address, + bdf, offset, valuep, size); + return ret; +} + +static int mtk_pcie_write_config(struct udevice *bus, pci_dev_t bdf, + uint offset, ulong value, + enum pci_size_t size) +{ + mtk_pcie_config_tlp_header(bus, bdf, offset, size); + + switch (size) { + case PCI_SIZE_8: + case PCI_SIZE_16: + value <<= (offset & 0x3) * 8; + case PCI_SIZE_32: + break; + default: + return -EINVAL; + } + + return pci_generic_mmap_write_config(bus, mtk_pcie_config_address, + bdf, (offset & ~0x3), value, PCI_SIZE_32); +} + +static const struct dm_pci_ops mtk_pcie_ops = { + .read_config = mtk_pcie_read_config, + .write_config = mtk_pcie_write_config, +}; + +static int mtk_pcie_set_trans_table(struct mtk_pcie *pcie, u64 cpu_addr, + u64 pci_addr, u64 size, + unsigned long type, int num) +{ + void __iomem *table; + u32 val; + + if (num >= PCIE_MAX_TRANS_TABLES) { + printf("not enough translate table for addr: %#llx, limited to [%d]\n", + (unsigned long long)cpu_addr, PCIE_MAX_TRANS_TABLES); + return -ENODEV; + } + + table = pcie->base + PCIE_TRANS_TABLE_BASE_REG + + num * PCIE_ATR_TLB_SET_OFFSET; + + writel(lower_32_bits(cpu_addr) | PCIE_ATR_SIZE(fls(size) - 1), table); + writel(upper_32_bits(cpu_addr), table + PCIE_ATR_SRC_ADDR_MSB_OFFSET); + writel(lower_32_bits(pci_addr), table + PCIE_ATR_TRSL_ADDR_LSB_OFFSET); + writel(upper_32_bits(pci_addr), table + PCIE_ATR_TRSL_ADDR_MSB_OFFSET); + + if (type == PCI_REGION_IO) + val = PCIE_ATR_TYPE_IO | PCIE_ATR_TLP_TYPE_IO; + else + val = PCIE_ATR_TYPE_MEM | PCIE_ATR_TLP_TYPE_MEM; + writel(val, table + PCIE_ATR_TRSL_PARAM_OFFSET); + + return 0; +} + +static int mtk_pcie_startup_port(struct udevice *dev) +{ + struct mtk_pcie *pcie = dev_get_priv(dev); + struct udevice *ctlr = pci_get_controller(dev); + struct pci_controller *hose = dev_get_uclass_priv(ctlr); + u32 val; + int i, err; + + /* Set as RC mode */ + val = readl(pcie->base + PCIE_SETTING_REG); + val |= PCIE_RC_MODE; + writel(val, pcie->base + PCIE_SETTING_REG); + + /* setup RC BARs */ + writel(PCI_BASE_ADDRESS_MEM_TYPE_64, + pcie->base + PCI_BASE_ADDRESS_0); + writel(0x0, pcie->base + PCI_BASE_ADDRESS_1); + + /* setup interrupt pins */ + clrsetbits_le32(pcie->base + PCI_INTERRUPT_LINE, + 0xff00, 0x100); + + /* setup bus numbers */ + clrsetbits_le32(pcie->base + PCI_PRIMARY_BUS, + 0xffffff, 0x00ff0100); + + /* setup command register */ + clrsetbits_le32(pcie->base + PCI_PRIMARY_BUS, + 0xffff, + PCI_COMMAND_IO | PCI_COMMAND_MEMORY | + PCI_COMMAND_MASTER | PCI_COMMAND_SERR); + + /* Set class code */ + val = readl(pcie->base + PCIE_PCI_IDS_1); + val &= ~GENMASK(31, 8); + val |= PCI_CLASS(PCI_CLASS_BRIDGE_PCI << 8); + writel(val, pcie->base + PCIE_PCI_IDS_1); + + /* Mask all INTx interrupts */ + val = readl(pcie->base + PCIE_INT_ENABLE_REG); + val &= ~0xFF000000; + writel(val, pcie->base + PCIE_INT_ENABLE_REG); + + /* Disable DVFSRC voltage request */ + val = readl(pcie->base + PCIE_MISC_CTRL_REG); + val |= PCIE_DISABLE_DVFSRC_VLT_REQ; + writel(val, pcie->base + PCIE_MISC_CTRL_REG); + + /* Assert all reset signals */ + val = readl(pcie->base + PCIE_RST_CTRL_REG); + val |= PCIE_MAC_RSTB | PCIE_PHY_RSTB | PCIE_BRG_RSTB | PCIE_PE_RSTB; + writel(val, pcie->base + PCIE_RST_CTRL_REG); + + /* + * Described in PCIe CEM specification sections 2.2 (PERST# Signal) + * and 2.2.1 (Initial Power-Up (G3 to S0)). + * The deassertion of PERST# should be delayed 100ms (TPVPERL) + * for the power and clock to become stable. + */ + mdelay(100); + + /* De-assert reset signals */ + val &= ~(PCIE_MAC_RSTB | PCIE_PHY_RSTB | PCIE_BRG_RSTB); + writel(val, pcie->base + PCIE_RST_CTRL_REG); + + mdelay(100); + + /* De-assert PERST# signals */ + val &= ~(PCIE_PE_RSTB); + writel(val, pcie->base + PCIE_RST_CTRL_REG); + + /* 100ms timeout value should be enough for Gen1/2 training */ + err = readl_poll_timeout(pcie->base + PCIE_LINK_STATUS_REG, val, + !!(val & PCIE_PORT_LINKUP), + 100 * 1000); + if (err) { + printf("no card detected at 0x%08lx\n", (unsigned long)pcie->base); + return -ETIMEDOUT; + } + printf("detected a card at 0x%08lx\n", (unsigned long)pcie->base); + + for (i = 0; i < hose->region_count; i++) { + struct pci_region *reg = &hose->regions[i]; + + if (reg->flags != PCI_REGION_MEM) + continue; + + mtk_pcie_set_trans_table(pcie, reg->bus_start, reg->phys_start, + reg->size, reg->flags, 0); + } + + return 0; +} + +static int mtk_pcie_power_on(struct udevice *dev) +{ + struct mtk_pcie *pcie = dev_get_priv(dev); + int err; + + pcie->base = dev_remap_addr_name(dev, "pcie-mac"); + if (!pcie->base) + return -ENOENT; + + pcie->priv = dev; + + pcie->use_dedicated_phy = dev_read_bool(dev, "use-dedicated-phy"); + + if (!pcie->use_dedicated_phy) { + err = generic_phy_get_by_name(dev, "pcie-phy", &pcie->phy); + if (err) + return err; + } + + err = clk_get_by_name(dev, "pl_250m", &pcie->pl_250m_ck); + if (err) + return err; + + err = clk_get_by_name(dev, "tl_26m", &pcie->tl_26m_ck); + if (err) + return err; + + err = clk_get_by_name(dev, "peri_26m", &pcie->peri_26m_ck); + if (err) + return err; + + err = clk_get_by_name(dev, "top_133m", &pcie->top_133m_ck); + if (err) + return err; + + err = generic_phy_init(&pcie->phy); + if (err) + return err; + + if (!pcie->use_dedicated_phy) { + err = generic_phy_power_on(&pcie->phy); + if (err) + goto err_phy_on; + } + + err = clk_enable(&pcie->pl_250m_ck); + if (err) + goto err_clk_pl_250m; + + err = clk_enable(&pcie->tl_26m_ck); + if (err) + goto err_clk_tl_26m; + + err = clk_enable(&pcie->peri_26m_ck); + if (err) + goto err_clk_peri_26m; + + err = clk_enable(&pcie->top_133m_ck); + if (err) + goto err_clk_top_133m; + + err = mtk_pcie_startup_port(dev); + if (err) + goto err_startup; + + return 0; + +err_startup: +err_clk_top_133m: + clk_disable(&pcie->top_133m_ck); +err_clk_peri_26m: + clk_disable(&pcie->peri_26m_ck); +err_clk_tl_26m: + clk_disable(&pcie->tl_26m_ck); +err_clk_pl_250m: + clk_disable(&pcie->pl_250m_ck); +err_phy_on: + generic_phy_exit(&pcie->phy); + + return err; +} + +static int mtk_pcie_probe(struct udevice *dev) +{ + struct mtk_pcie *pcie = dev_get_priv(dev); + int err; + + pcie->priv = dev; + + err = mtk_pcie_power_on(dev); + if (err) + return err; + + return 0; +} + +static const struct udevice_id mtk_pcie_ids[] = { + { .compatible = "mediatek,mt8192-pcie" }, + { } +}; + +U_BOOT_DRIVER(pcie_mediatek_gen3) = { + .name = "pcie_mediatek_gen3", + .id = UCLASS_PCI, + .of_match = mtk_pcie_ids, + .ops = &mtk_pcie_ops, + .probe = mtk_pcie_probe, + .priv_auto = sizeof(struct mtk_pcie), +}; diff --git a/include/dt-bindings/clock/mt7981-clk.h b/include/dt-bindings/clock/mt7981-clk.h index e24c759e4992..1c2781cd765c 100644 --- a/include/dt-bindings/clock/mt7981-clk.h +++ b/include/dt-bindings/clock/mt7981-clk.h @@ -226,7 +226,8 @@ #define CK_INFRA_IPCIE_CK (54 - INFRACFG_AO_OFFSET) #define CK_INFRA_IPCIER_CK (55 - INFRACFG_AO_OFFSET) #define CK_INFRA_IPCIEB_CK (56 - INFRACFG_AO_OFFSET) -#define CLK_INFRA_AO_NR_CLK (57 - INFRACFG_AO_OFFSET) +#define CK_INFRA_IPCIE_PIPE_CK (57 - INFRACFG_AO_OFFSET) +#define CLK_INFRA_AO_NR_CLK (58 - INFRACFG_AO_OFFSET) /* APMIXEDSYS */ diff --git a/include/dt-bindings/clock/mt7986-clk.h b/include/dt-bindings/clock/mt7986-clk.h index 820f86318316..fdf705921700 100644 --- a/include/dt-bindings/clock/mt7986-clk.h +++ b/include/dt-bindings/clock/mt7986-clk.h @@ -205,7 +205,8 @@ #define CK_INFRA_IPCIE_CK 42 #define CK_INFRA_IPCIER_CK 43 #define CK_INFRA_IPCIEB_CK 44 -#define CLK_INFRA_AO_NR_CLK 45 +#define CK_INFRA_IPCIE_PIPE_CK 45 +#define CLK_INFRA_AO_NR_CLK 46 /* APMIXEDSYS */ -- 2.34.1

3 4

[PATCH v2 0/6] Enable OF_UPSTREAM for J721s2 and AM68
by Manorit Chawdhry 10 May '24

10 May '24

Series splits AM68 and J721s2 support along with enabling OF_UPSTREAM and adding stdboot support for both the platforms. Boot logs: https://gist.github.com/manorit2001/6c669e4273933bc46c3b28a631a96ae3 Signed-off-by: Manorit Chawdhry <m-chawdhry(a)ti.com> --- Changes in v2: - Improve the commit message (Neha) - Re-order the patches to not break bisectability - Link to v1: https://lore.kernel.org/r/20240508-b4-upstream-j721s2-of-upstream-v1-0-ed09… --- Manorit Chawdhry (4): arch: arm: dts: k3-am68-sk-r5: Sync with J721s2 R5 file arch: arm: dts: k3-j721s2-r5: Introduce k3-j721s2-r5.dtsi configs: am68_sk: Move to separate defconfig for AM68 SK board arm: dts: k3-j721s2|am68: Migrate to OF_UPSTREAM Neha Malcom Francis (2): board: ti: j721s2: j721s2.env: Add explicit boot_targets configs: j721s2_evm_a72_defconfig: Switch to bootstd arch/arm/dts/Makefile | 4 +- arch/arm/dts/k3-am68-sk-base-board-u-boot.dtsi | 41 +- arch/arm/dts/k3-am68-sk-base-board.dts | 611 ------- arch/arm/dts/k3-am68-sk-r5-base-board.dts | 75 +- arch/arm/dts/k3-am68-sk-som.dtsi | 259 --- arch/arm/dts/k3-j721s2-binman.dtsi | 91 +- .../dts/k3-j721s2-common-proc-board-u-boot.dtsi | 18 +- arch/arm/dts/k3-j721s2-common-proc-board.dts | 504 ----- arch/arm/dts/k3-j721s2-main.dtsi | 1928 -------------------- arch/arm/dts/k3-j721s2-mcu-wakeup.dtsi | 738 -------- arch/arm/dts/k3-j721s2-r5-common-proc-board.dts | 78 +- arch/arm/dts/k3-j721s2-r5.dtsi | 81 + arch/arm/dts/k3-j721s2-som-p0.dtsi | 361 ---- arch/arm/dts/k3-j721s2-thermal.dtsi | 101 - arch/arm/dts/k3-j721s2.dtsi | 175 -- board/ti/j721s2/MAINTAINERS | 11 +- board/ti/j721s2/j721s2.env | 1 + configs/am68_sk_a72_defconfig | 10 + configs/am68_sk_r5_defconfig | 10 + configs/j721s2_evm_a72_defconfig | 10 +- configs/j721s2_evm_r5_defconfig | 2 +- include/configs/j721s2_evm.h | 1 - 22 files changed, 155 insertions(+), 4955 deletions(-) --- base-commit: 2f1e76bcfee75b9f99ade63002c05ffaaec86afb change-id: 20240506-b4-upstream-j721s2-of-upstream-3c28ff12d664 Best regards, -- Manorit Chawdhry <m-chawdhry(a)ti.com>

3 11

[PATCH v2] sysreset: psci: drop reliance on SPL support
by Andre Przywara 10 May '24

10 May '24

At the moment enabling CONFIG_SYSRESET_PSCI *selects* SPL_ARM_PSCI_FW, even though this is a platform design property, so nothing any driver should enforce. Some platforms load the PSCI runtime (TF-A) only in the SPL, so PSCI is naturally not available during SPL runtime. Spit CONFIG_SYSRESET_PSCI up into an SPL and a U-Boot proper version, and let the former *depend* on SPL_ARM_PSCI_FW. This allows to enable CONFIG_SYSRESET_PSCI on platforms without SPL PSCI support. Signed-off-by: Andre Przywara <andre.przywara(a)arm.com> --- changelog v1 ... v2: - change name of symbol to comply with CONFIG_$(SPL_TPL_)SYSRESET_PSCI drivers/sysreset/Kconfig | 8 +++++++- drivers/sysreset/Makefile | 2 +- 2 files changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/sysreset/Kconfig b/drivers/sysreset/Kconfig index 49c0787b26d..ede9e23eacf 100644 --- a/drivers/sysreset/Kconfig +++ b/drivers/sysreset/Kconfig @@ -119,11 +119,17 @@ config SYSRESET_PALMAS config SYSRESET_PSCI bool "Enable support for PSCI System Reset" depends on ARM_PSCI_FW - select SPL_ARM_PSCI_FW if SPL help Enable PSCI SYSTEM_RESET function call. To use this, PSCI firmware must be running on your system. +config SPL_SYSRESET_PSCI + bool "Enable support for PSCI System Reset in SPL" + depends on SPL_ARM_PSCI_FW + help + Enable PSCI SYSTEM_RESET function call in the SPL. To use this, PSCI + firmware must be running on your system before the SPL. + config SYSRESET_SBI bool "Enable support for SBI System Reset" depends on RISCV_SMODE && SBI_V02 diff --git a/drivers/sysreset/Makefile b/drivers/sysreset/Makefile index e0e732205df..8d992ae0930 100644 --- a/drivers/sysreset/Makefile +++ b/drivers/sysreset/Makefile @@ -14,7 +14,7 @@ obj-$(CONFIG_SYSRESET_MPC83XX) += sysreset_mpc83xx.o obj-$(CONFIG_SYSRESET_MICROBLAZE) += sysreset_microblaze.o obj-$(CONFIG_SYSRESET_OCTEON) += sysreset_octeon.o obj-$(CONFIG_$(SPL_TPL_)SYSRESET_PALMAS) += sysreset_palmas.o -obj-$(CONFIG_SYSRESET_PSCI) += sysreset_psci.o +obj-$(CONFIG_$(SPL_TPL_)SYSRESET_PSCI) += sysreset_psci.o obj-$(CONFIG_SYSRESET_SBI) += sysreset_sbi.o obj-$(CONFIG_SYSRESET_SOCFPGA) += sysreset_socfpga.o obj-$(CONFIG_SYSRESET_SOCFPGA_SOC64) += sysreset_socfpga_soc64.o -- 2.35.8

2 1

[PATCH] rockchip: rv1108: Remove unneeded local rv1108-cru.h
by Fabio Estevam 10 May '24

10 May '24

After the conversion of RV1108 to OF_UPSTREAM, include/dt-bindings/clock/rv1108-cru.h is no longer needed because there is dts/upstream/include/dt-bindings/clock/rv1108-cru.h from upstream Linux. Remove the unneeded rv1108-cru.h file. Reported-by: Jonas Karlman <jonas(a)kwiboo.se> Signed-off-by: Fabio Estevam <festevam(a)gmail.com> --- include/dt-bindings/clock/rv1108-cru.h | 356 ------------------------- 1 file changed, 356 deletions(-) delete mode 100644 include/dt-bindings/clock/rv1108-cru.h diff --git a/include/dt-bindings/clock/rv1108-cru.h b/include/dt-bindings/clock/rv1108-cru.h deleted file mode 100644 index 10ed9d140f4b..000000000000 --- a/include/dt-bindings/clock/rv1108-cru.h +++ /dev/null @@ -1,356 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (c) 2017 Rockchip Electronics Co. Ltd. - * Author: Shawn Lin <shawn.lin(a)rock-chips.com> - */ - -#ifndef _DT_BINDINGS_CLK_ROCKCHIP_RV1108_H -#define _DT_BINDINGS_CLK_ROCKCHIP_RV1108_H - -/* pll id */ -#define PLL_APLL 0 -#define PLL_DPLL 1 -#define PLL_GPLL 2 -#define ARMCLK 3 - -/* sclk gates (special clocks) */ -#define SCLK_SPI0 65 -#define SCLK_NANDC 67 -#define SCLK_SDMMC 68 -#define SCLK_SDIO 69 -#define SCLK_EMMC 71 -#define SCLK_UART0 72 -#define SCLK_UART1 73 -#define SCLK_UART2 74 -#define SCLK_I2S0 75 -#define SCLK_I2S1 76 -#define SCLK_I2S2 77 -#define SCLK_TIMER0 78 -#define SCLK_TIMER1 79 -#define SCLK_SFC 80 -#define SCLK_SDMMC_DRV 81 -#define SCLK_SDIO_DRV 82 -#define SCLK_EMMC_DRV 83 -#define SCLK_SDMMC_SAMPLE 84 -#define SCLK_SDIO_SAMPLE 85 -#define SCLK_EMMC_SAMPLE 86 -#define SCLK_VENC_CORE 87 -#define SCLK_HEVC_CORE 88 -#define SCLK_HEVC_CABAC 89 -#define SCLK_PWM0_PMU 90 -#define SCLK_I2C0_PMU 91 -#define SCLK_WIFI 92 -#define SCLK_CIFOUT 93 -#define SCLK_MIPI_CSI_OUT 94 -#define SCLK_CIF0 95 -#define SCLK_CIF1 96 -#define SCLK_CIF2 97 -#define SCLK_CIF3 98 -#define SCLK_DSP 99 -#define SCLK_DSP_IOP 100 -#define SCLK_DSP_EPP 101 -#define SCLK_DSP_EDP 102 -#define SCLK_DSP_EDAP 103 -#define SCLK_CVBS_HOST 104 -#define SCLK_HDMI_SFR 105 -#define SCLK_HDMI_CEC 106 -#define SCLK_CRYPTO 107 -#define SCLK_SPI 108 -#define SCLK_SARADC 109 -#define SCLK_TSADC 110 -#define SCLK_MAC_PRE 111 -#define SCLK_MAC 112 -#define SCLK_MAC_RX 113 -#define SCLK_MAC_REF 114 -#define SCLK_MAC_REFOUT 115 -#define SCLK_DSP_PFM 116 -#define SCLK_RGA 117 -#define SCLK_I2C1 118 -#define SCLK_I2C2 119 -#define SCLK_I2C3 120 -#define SCLK_PWM 121 -#define SCLK_ISP 122 -#define SCLK_USBPHY 123 -#define SCLK_I2S0_SRC 124 -#define SCLK_I2S1_SRC 125 -#define SCLK_I2S2_SRC 126 -#define SCLK_UART0_SRC 127 -#define SCLK_UART1_SRC 128 -#define SCLK_UART2_SRC 129 -#define SCLK_MAC_TX 130 -#define SCLK_MACREF 131 -#define SCLK_MACREF_OUT 132 - -#define DCLK_VOP_SRC 185 -#define DCLK_HDMIPHY 186 -#define DCLK_VOP 187 - -/* aclk gates */ -#define ACLK_DMAC 192 -#define ACLK_PRE 193 -#define ACLK_CORE 194 -#define ACLK_ENMCORE 195 -#define ACLK_RKVENC 196 -#define ACLK_RKVDEC 197 -#define ACLK_VPU 198 -#define ACLK_CIF0 199 -#define ACLK_VIO0 200 -#define ACLK_VIO1 201 -#define ACLK_VOP 202 -#define ACLK_IEP 203 -#define ACLK_RGA 204 -#define ACLK_ISP 205 -#define ACLK_CIF1 206 -#define ACLK_CIF2 207 -#define ACLK_CIF3 208 -#define ACLK_PERI 209 -#define ACLK_GMAC 210 - -/* pclk gates */ -#define PCLK_GPIO1 256 -#define PCLK_GPIO2 257 -#define PCLK_GPIO3 258 -#define PCLK_GRF 259 -#define PCLK_I2C1 260 -#define PCLK_I2C2 261 -#define PCLK_I2C3 262 -#define PCLK_SPI 263 -#define PCLK_SFC 264 -#define PCLK_UART0 265 -#define PCLK_UART1 266 -#define PCLK_UART2 267 -#define PCLK_TSADC 268 -#define PCLK_PWM 269 -#define PCLK_TIMER 270 -#define PCLK_PERI 271 -#define PCLK_GPIO0_PMU 272 -#define PCLK_I2C0_PMU 273 -#define PCLK_PWM0_PMU 274 -#define PCLK_ISP 275 -#define PCLK_VIO 276 -#define PCLK_MIPI_DSI 277 -#define PCLK_HDMI_CTRL 278 -#define PCLK_SARADC 279 -#define PCLK_DSP_CFG 280 -#define PCLK_BUS 281 -#define PCLK_EFUSE0 282 -#define PCLK_EFUSE1 283 -#define PCLK_WDT 284 -#define PCLK_GMAC 285 - -/* hclk gates */ -#define HCLK_I2S0_8CH 320 -#define HCLK_I2S1_2CH 321 -#define HCLK_I2S2_2CH 322 -#define HCLK_NANDC 323 -#define HCLK_SDMMC 324 -#define HCLK_SDIO 325 -#define HCLK_EMMC 326 -#define HCLK_PERI 327 -#define HCLK_SFC 328 -#define HCLK_RKVENC 329 -#define HCLK_RKVDEC 330 -#define HCLK_CIF0 331 -#define HCLK_VIO 332 -#define HCLK_VOP 333 -#define HCLK_IEP 334 -#define HCLK_RGA 335 -#define HCLK_ISP 336 -#define HCLK_CRYPTO_MST 337 -#define HCLK_CRYPTO_SLV 338 -#define HCLK_HOST0 339 -#define HCLK_OTG 340 -#define HCLK_CIF1 341 -#define HCLK_CIF2 342 -#define HCLK_CIF3 343 -#define HCLK_BUS 344 -#define HCLK_VPU 345 - -#define CLK_NR_CLKS (HCLK_VPU + 1) - -/* reset id */ -#define SRST_CORE_PO_AD 0 -#define SRST_CORE_AD 1 -#define SRST_L2_AD 2 -#define SRST_CPU_NIU_AD 3 -#define SRST_CORE_PO 4 -#define SRST_CORE 5 -#define SRST_L2 6 -#define SRST_CORE_DBG 8 -#define PRST_DBG 9 -#define RST_DAP 10 -#define PRST_DBG_NIU 11 -#define ARST_STRC_SYS_AD 15 - -#define SRST_DDRPHY_CLKDIV 16 -#define SRST_DDRPHY 17 -#define PRST_DDRPHY 18 -#define PRST_HDMIPHY 19 -#define PRST_VDACPHY 20 -#define PRST_VADCPHY 21 -#define PRST_MIPI_CSI_PHY 22 -#define PRST_MIPI_DSI_PHY 23 -#define PRST_ACODEC 24 -#define ARST_BUS_NIU 25 -#define PRST_TOP_NIU 26 -#define ARST_INTMEM 27 -#define HRST_ROM 28 -#define ARST_DMAC 29 -#define SRST_MSCH_NIU 30 -#define PRST_MSCH_NIU 31 - -#define PRST_DDRUPCTL 32 -#define NRST_DDRUPCTL 33 -#define PRST_DDRMON 34 -#define HRST_I2S0_8CH 35 -#define MRST_I2S0_8CH 36 -#define HRST_I2S1_2CH 37 -#define MRST_IS21_2CH 38 -#define HRST_I2S2_2CH 39 -#define MRST_I2S2_2CH 40 -#define HRST_CRYPTO 41 -#define SRST_CRYPTO 42 -#define PRST_SPI 43 -#define SRST_SPI 44 -#define PRST_UART0 45 -#define PRST_UART1 46 -#define PRST_UART2 47 - -#define SRST_UART0 48 -#define SRST_UART1 49 -#define SRST_UART2 50 -#define PRST_I2C1 51 -#define PRST_I2C2 52 -#define PRST_I2C3 53 -#define SRST_I2C1 54 -#define SRST_I2C2 55 -#define SRST_I2C3 56 -#define PRST_PWM1 58 -#define SRST_PWM1 60 -#define PRST_WDT 61 -#define PRST_GPIO1 62 -#define PRST_GPIO2 63 - -#define PRST_GPIO3 64 -#define PRST_GRF 65 -#define PRST_EFUSE 66 -#define PRST_EFUSE512 67 -#define PRST_TIMER0 68 -#define SRST_TIMER0 69 -#define SRST_TIMER1 70 -#define PRST_TSADC 71 -#define SRST_TSADC 72 -#define PRST_SARADC 73 -#define SRST_SARADC 74 -#define HRST_SYSBUS 75 -#define PRST_USBGRF 76 - -#define ARST_PERIPH_NIU 80 -#define HRST_PERIPH_NIU 81 -#define PRST_PERIPH_NIU 82 -#define HRST_PERIPH 83 -#define HRST_SDMMC 84 -#define HRST_SDIO 85 -#define HRST_EMMC 86 -#define HRST_NANDC 87 -#define NRST_NANDC 88 -#define HRST_SFC 89 -#define SRST_SFC 90 -#define ARST_GMAC 91 -#define HRST_OTG 92 -#define SRST_OTG 93 -#define SRST_OTG_ADP 94 -#define HRST_HOST0 95 - -#define HRST_HOST0_AUX 96 -#define HRST_HOST0_ARB 97 -#define SRST_HOST0_EHCIPHY 98 -#define SRST_HOST0_UTMI 99 -#define SRST_USBPOR 100 -#define SRST_UTMI0 101 -#define SRST_UTMI1 102 - -#define ARST_VIO0_NIU 102 -#define ARST_VIO1_NIU 103 -#define HRST_VIO_NIU 104 -#define PRST_VIO_NIU 105 -#define ARST_VOP 106 -#define HRST_VOP 107 -#define DRST_VOP 108 -#define ARST_IEP 109 -#define HRST_IEP 110 -#define ARST_RGA 111 -#define HRST_RGA 112 -#define SRST_RGA 113 -#define PRST_CVBS 114 -#define PRST_HDMI 115 -#define SRST_HDMI 116 -#define PRST_MIPI_DSI 117 - -#define ARST_ISP_NIU 118 -#define HRST_ISP_NIU 119 -#define HRST_ISP 120 -#define SRST_ISP 121 -#define ARST_VIP0 122 -#define HRST_VIP0 123 -#define PRST_VIP0 124 -#define ARST_VIP1 125 -#define HRST_VIP1 126 -#define PRST_VIP1 127 -#define ARST_VIP2 128 -#define HRST_VIP2 129 -#define PRST_VIP2 120 -#define ARST_VIP3 121 -#define HRST_VIP3 122 -#define PRST_VIP4 123 - -#define PRST_CIF1TO4 124 -#define SRST_CVBS_CLK 125 -#define HRST_CVBS 126 - -#define ARST_VPU_NIU 140 -#define HRST_VPU_NIU 141 -#define ARST_VPU 142 -#define HRST_VPU 143 -#define ARST_RKVDEC_NIU 144 -#define HRST_RKVDEC_NIU 145 -#define ARST_RKVDEC 146 -#define HRST_RKVDEC 147 -#define SRST_RKVDEC_CABAC 148 -#define SRST_RKVDEC_CORE 149 -#define ARST_RKVENC_NIU 150 -#define HRST_RKVENC_NIU 151 -#define ARST_RKVENC 152 -#define HRST_RKVENC 153 -#define SRST_RKVENC_CORE 154 - -#define SRST_DSP_CORE 156 -#define SRST_DSP_SYS 157 -#define SRST_DSP_GLOBAL 158 -#define SRST_DSP_OECM 159 -#define PRST_DSP_IOP_NIU 160 -#define ARST_DSP_EPP_NIU 161 -#define ARST_DSP_EDP_NIU 162 -#define PRST_DSP_DBG_NIU 163 -#define PRST_DSP_CFG_NIU 164 -#define PRST_DSP_GRF 165 -#define PRST_DSP_MAILBOX 166 -#define PRST_DSP_INTC 167 -#define PRST_DSP_PFM_MON 169 -#define SRST_DSP_PFM_MON 170 -#define ARST_DSP_EDAP_NIU 171 - -#define SRST_PMU 172 -#define SRST_PMU_I2C0 173 -#define PRST_PMU_I2C0 174 -#define PRST_PMU_GPIO0 175 -#define PRST_PMU_INTMEM 176 -#define PRST_PMU_PWM0 177 -#define SRST_PMU_PWM0 178 -#define PRST_PMU_GRF 179 -#define SRST_PMU_NIU 180 -#define SRST_PMU_PVTM 181 -#define ARST_DSP_EDP_PERF 184 -#define ARST_DSP_EPP_PERF 185 - -#endif /* _DT_BINDINGS_CLK_ROCKCHIP_RV1108_H */ -- 2.34.1

2 1

[PATCH 01/81] mmc: Migrate MMC_SUPPORTS_TUNING to Kconfig
by Tom Rini 10 May '24

10 May '24

The constraints on the MMC_SUPPORTS_TUNING symbol can easily be expressed in Kconfig (with the addition of SPL_MMC_SUPPORTS_TUNING). Furthermore, in order to remove <common.h> from the MMC subsystem, the way this symbol is used today needs to be changed in order to continue functioning. Signed-off-by: Tom Rini <trini(a)konsulko.com> --- Cc: Weijie Gao <weijie.gao(a)mediatek.com> Cc: GSS_MTK_Uboot_upstream <GSS_MTK_Uboot_upstream(a)mediatek.com> Cc: Peng Fan <peng.fan(a)nxp.com> Cc: Jaehoon Chung <jh80.chung(a)samsung.com> --- arch/arm/mach-mediatek/Kconfig | 1 + arch/mips/mach-mtmips/Kconfig | 1 + drivers/mmc/Kconfig | 11 +++++++++++ drivers/mmc/am654_sdhci.c | 6 +++--- drivers/mmc/fsl_esdhc.c | 4 ++-- drivers/mmc/fsl_esdhc_imx.c | 8 ++++---- drivers/mmc/mmc-uclass.c | 2 +- drivers/mmc/mmc.c | 12 ++++++------ drivers/mmc/mtk-sd.c | 4 ++-- drivers/mmc/octeontx_hsmmc.c | 12 ++++++------ drivers/mmc/omap_hsmmc.c | 4 ++-- drivers/mmc/sdhci-cadence.c | 2 +- drivers/mmc/sdhci.c | 4 ++-- include/configs/mt7621.h | 3 --- include/configs/mt7623.h | 3 --- include/configs/octeontx2_common.h | 5 ----- include/mmc.h | 9 +-------- 17 files changed, 43 insertions(+), 48 deletions(-) diff --git a/arch/arm/mach-mediatek/Kconfig b/arch/arm/mach-mediatek/Kconfig index 82018bd9d3e3..ff1fdee5c8da 100644 --- a/arch/arm/mach-mediatek/Kconfig +++ b/arch/arm/mach-mediatek/Kconfig @@ -23,6 +23,7 @@ config TARGET_MT7622 config TARGET_MT7623 bool "MediaTek MT7623 SoC" select CPU_V7A + select MMC_SUPPORTS_TUNING help The MediaTek MT7623 is a ARM-based SoC with a quad-core Cortex-A7 including NEON and GPU, Mali-450 graphics, several DDR3 options, diff --git a/arch/mips/mach-mtmips/Kconfig b/arch/mips/mach-mtmips/Kconfig index 15b2792e619b..3fcd0b8465b4 100644 --- a/arch/mips/mach-mtmips/Kconfig +++ b/arch/mips/mach-mtmips/Kconfig @@ -80,6 +80,7 @@ config SOC_MT7621 bool "MT7621" select MIPS_CM select MIPS_L2_CACHE + select MMC_SUPPORTS_TUNING select SYS_CACHE_SHIFT_5 select SYS_MIPS_CACHE_INIT_RAM_LOAD select PINCTRL_MT7621 diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig index 549634891a36..d0944793c92d 100644 --- a/drivers/mmc/Kconfig +++ b/drivers/mmc/Kconfig @@ -147,9 +147,16 @@ config SPL_MMC_IO_VOLTAGE support. For eMMC this not mandatory, but not enabling this option may prevent the driver of using the faster modes. +config MMC_SUPPORTS_TUNING + bool + +config SPL_MMC_SUPPORTS_TUNING + bool + config MMC_UHS_SUPPORT bool "enable UHS support" depends on MMC_IO_VOLTAGE + select MMC_SUPPORTS_TUNING help The Ultra High Speed (UHS) bus is available on some SDHC and SDXC cards. The IO voltage must be switchable from 3.3v to 1.8v. The bus @@ -158,6 +165,7 @@ config MMC_UHS_SUPPORT config SPL_MMC_UHS_SUPPORT bool "enable UHS support in SPL" depends on SPL_MMC_IO_VOLTAGE + select SPL_MMC_SUPPORTS_TUNING help The Ultra High Speed (UHS) bus is available on some SDHC and SDXC cards. The IO voltage must be switchable from 3.3v to 1.8v. The bus @@ -193,6 +201,7 @@ config SPL_MMC_HS400_SUPPORT config MMC_HS200_SUPPORT bool "enable HS200 support" + select MMC_SUPPORTS_TUNING help The HS200 mode is support by some eMMC. The bus frequency is up to 200MHz. This mode requires tuning the IO. @@ -200,6 +209,7 @@ config MMC_HS200_SUPPORT config SPL_MMC_HS200_SUPPORT bool "enable HS200 support in SPL" depends on SPL_MMC + select SPL_MMC_SUPPORTS_TUNING help The HS200 mode is support by some eMMC. The bus frequency is up to 200MHz. This mode requires tuning the IO. @@ -347,6 +357,7 @@ config MMC_OCTEONTX bool "Marvell Octeon Multimedia Card Interface support" depends on (ARCH_OCTEON || ARCH_OCTEONTX || ARCH_OCTEONTX2) depends on DM_MMC + select MMC_SUPPORTS_TUNING if ARCH_OCTEONTX2 help This selects the Octeon Multimedia card Interface. If you have an OcteonTX/TX2 or MIPS Octeon board with a diff --git a/drivers/mmc/am654_sdhci.c b/drivers/mmc/am654_sdhci.c index fadab7d40bb7..ffb461c2f6c1 100644 --- a/drivers/mmc/am654_sdhci.c +++ b/drivers/mmc/am654_sdhci.c @@ -397,7 +397,7 @@ static void am654_sdhci_write_b(struct sdhci_host *host, u8 val, int reg) writeb(val, host->ioaddr + reg); } -#ifdef MMC_SUPPORTS_TUNING +#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING) #define ITAPDLY_LENGTH 32 #define ITAPDLY_LAST_INDEX (ITAPDLY_LENGTH - 1) @@ -500,7 +500,7 @@ static int am654_sdhci_execute_tuning(struct mmc *mmc, u8 opcode) } #endif const struct sdhci_ops am654_sdhci_ops = { -#ifdef MMC_SUPPORTS_TUNING +#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING) .platform_execute_tuning = am654_sdhci_execute_tuning, #endif .deferred_probe = am654_sdhci_deferred_probe, @@ -560,7 +560,7 @@ static int j721e_4bit_sdhci_set_ios_post(struct sdhci_host *host) } const struct sdhci_ops j721e_4bit_sdhci_ops = { -#ifdef MMC_SUPPORTS_TUNING +#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING) .platform_execute_tuning = am654_sdhci_execute_tuning, #endif .deferred_probe = am654_sdhci_deferred_probe, diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c index 595d88bd5625..5ac1c6a0e9e1 100644 --- a/drivers/mmc/fsl_esdhc.c +++ b/drivers/mmc/fsl_esdhc.c @@ -1102,7 +1102,7 @@ static int fsl_esdhc_reinit(struct udevice *dev) return esdhc_init_common(priv, &plat->mmc); } -#ifdef MMC_SUPPORTS_TUNING +#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING) static int fsl_esdhc_execute_tuning(struct udevice *dev, uint32_t opcode) { struct fsl_esdhc_plat *plat = dev_get_plat(dev); @@ -1175,7 +1175,7 @@ static const struct dm_mmc_ops fsl_esdhc_ops = { .get_cd = fsl_esdhc_get_cd, .send_cmd = fsl_esdhc_send_cmd, .set_ios = fsl_esdhc_set_ios, -#ifdef MMC_SUPPORTS_TUNING +#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING) .execute_tuning = fsl_esdhc_execute_tuning, #endif .reinit = fsl_esdhc_reinit, diff --git a/drivers/mmc/fsl_esdhc_imx.c b/drivers/mmc/fsl_esdhc_imx.c index b74c01400205..8b2ef9391f3e 100644 --- a/drivers/mmc/fsl_esdhc_imx.c +++ b/drivers/mmc/fsl_esdhc_imx.c @@ -635,7 +635,7 @@ static void set_sysctl(struct fsl_esdhc_priv *priv, struct mmc *mmc, uint clock) priv->clock = clock; } -#ifdef MMC_SUPPORTS_TUNING +#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING) static int esdhc_change_pinstate(struct udevice *dev) { struct fsl_esdhc_priv *priv = dev_get_priv(dev); @@ -913,7 +913,7 @@ static int esdhc_set_ios_common(struct fsl_esdhc_priv *priv, struct mmc *mmc) int ret __maybe_unused; u32 clock; -#ifdef MMC_SUPPORTS_TUNING +#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING) /* * call esdhc_set_timing() before update the clock rate, * This is because current we support DDR and SDR mode, @@ -951,7 +951,7 @@ static int esdhc_set_ios_common(struct fsl_esdhc_priv *priv, struct mmc *mmc) esdhc_setbits32(&regs->sysctl, SYSCTL_PEREN | SYSCTL_CKEN); } -#ifdef MMC_SUPPORTS_TUNING +#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING) /* * For HS400/HS400ES mode, make sure set the strobe dll in the * target clock rate. So call esdhc_set_strobe_dll() after the @@ -1618,7 +1618,7 @@ static const struct dm_mmc_ops fsl_esdhc_ops = { .get_cd = fsl_esdhc_get_cd, .send_cmd = fsl_esdhc_send_cmd, .set_ios = fsl_esdhc_set_ios, -#ifdef MMC_SUPPORTS_TUNING +#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING) .execute_tuning = fsl_esdhc_execute_tuning, #endif #if CONFIG_IS_ENABLED(MMC_HS400_ES_SUPPORT) diff --git a/drivers/mmc/mmc-uclass.c b/drivers/mmc/mmc-uclass.c index 24170c59ecc1..0685b86af464 100644 --- a/drivers/mmc/mmc-uclass.c +++ b/drivers/mmc/mmc-uclass.c @@ -112,7 +112,7 @@ int mmc_getcd(struct mmc *mmc) return dm_mmc_get_cd(mmc->dev); } -#ifdef MMC_SUPPORTS_TUNING +#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING) static int dm_mmc_execute_tuning(struct udevice *dev, uint opcode) { struct dm_mmc_ops *ops = mmc_get_ops(dev); diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index 7b068c71ff37..4543d94c7205 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -329,7 +329,7 @@ int mmc_set_blocklen(struct mmc *mmc, int len) MMC_QUIRK_RETRY_SET_BLOCKLEN, 4); } -#ifdef MMC_SUPPORTS_TUNING +#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING) static const u8 tuning_blk_pattern_4bit[] = { 0xff, 0x0f, 0xff, 0x00, 0xff, 0xcc, 0xc3, 0xcc, 0xc3, 0x3c, 0xcc, 0xff, 0xfe, 0xff, 0xfe, 0xef, @@ -1621,7 +1621,7 @@ static inline int bus_width(uint cap) } #if !CONFIG_IS_ENABLED(DM_MMC) -#ifdef MMC_SUPPORTS_TUNING +#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING) static int mmc_execute_tuning(struct mmc *mmc, uint opcode) { return -ENOTSUPP; @@ -1702,7 +1702,7 @@ void mmc_dump_capabilities(const char *text, uint caps) struct mode_width_tuning { enum bus_mode mode; uint widths; -#ifdef MMC_SUPPORTS_TUNING +#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING) uint tuning; #endif }; @@ -1743,7 +1743,7 @@ static inline int mmc_set_signal_voltage(struct mmc *mmc, uint signal_voltage) #if !CONFIG_IS_ENABLED(MMC_TINY) static const struct mode_width_tuning sd_modes_by_pref[] = { #if CONFIG_IS_ENABLED(MMC_UHS_SUPPORT) -#ifdef MMC_SUPPORTS_TUNING +#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING) { .mode = UHS_SDR104, .widths = MMC_MODE_4BIT | MMC_MODE_1BIT, @@ -1846,7 +1846,7 @@ static int sd_select_mode_and_width(struct mmc *mmc, uint card_caps) mmc_set_clock(mmc, mmc->tran_speed, MMC_CLK_ENABLE); -#ifdef MMC_SUPPORTS_TUNING +#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING) /* execute tuning if needed */ if (mwt->tuning && !mmc_host_is_spi(mmc)) { err = mmc_execute_tuning(mmc, @@ -2224,7 +2224,7 @@ static int mmc_select_mode_and_width(struct mmc *mmc, uint card_caps) mmc_select_mode(mmc, mwt->mode); mmc_set_clock(mmc, mmc->tran_speed, MMC_CLK_ENABLE); -#ifdef MMC_SUPPORTS_TUNING +#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING) /* execute tuning if needed */ if (mwt->tuning) { diff --git a/drivers/mmc/mtk-sd.c b/drivers/mmc/mtk-sd.c index 296aaee73318..4bd66ecf93ad 100644 --- a/drivers/mmc/mtk-sd.c +++ b/drivers/mmc/mtk-sd.c @@ -1011,7 +1011,7 @@ static int msdc_ops_get_wp(struct udevice *dev) #endif } -#ifdef MMC_SUPPORTS_TUNING +#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING) static u32 test_delay_bit(u32 delay, u32 bit) { bit %= PAD_DELAY_MAX; @@ -1760,7 +1760,7 @@ static const struct dm_mmc_ops msdc_ops = { .set_ios = msdc_ops_set_ios, .get_cd = msdc_ops_get_cd, .get_wp = msdc_ops_get_wp, -#ifdef MMC_SUPPORTS_TUNING +#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING) .execute_tuning = msdc_execute_tuning, #endif .wait_dat0 = msdc_ops_wait_dat0, diff --git a/drivers/mmc/octeontx_hsmmc.c b/drivers/mmc/octeontx_hsmmc.c index 7f9c4f4d36d4..3b5e12217325 100644 --- a/drivers/mmc/octeontx_hsmmc.c +++ b/drivers/mmc/octeontx_hsmmc.c @@ -794,7 +794,7 @@ octeontx_mmc_get_cr_mods(struct mmc *mmc, const struct mmc_cmd *cmd, u8 desired_ctype = 0; if (IS_MMC(mmc)) { -#ifdef MMC_SUPPORTS_TUNING +#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING) if (cmd->cmdidx == MMC_CMD_SEND_TUNING_BLOCK_HS200) { if (cmd->resp_type == MMC_RSP_R1) cr.rtype_xor = 1; @@ -1631,7 +1631,7 @@ static int octeontx_mmc_dev_send_cmd(struct udevice *dev, struct mmc_cmd *cmd, return octeontx_mmc_send_cmd(dev_to_mmc(dev), cmd, data); } -#ifdef MMC_SUPPORTS_TUNING +#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING) static int octeontx_mmc_test_cmd(struct mmc *mmc, u32 opcode, int *statp) { struct mmc_cmd cmd; @@ -2421,12 +2421,12 @@ static int octeontx_mmc_execute_tuning(struct udevice *dev, u32 opcode) return 0; } -#else /* MMC_SUPPORTS_TUNING */ +#else /* CONFIG_MMC_SUPPORTS_TUNING */ static void octeontx_mmc_set_emm_timing(struct mmc *mmc, union mio_emm_timing emm_timing) { } -#endif /* MMC_SUPPORTS_TUNING */ +#endif /* CONFIG_MMC_SUPPORTS_TUNING */ /** * Calculate the clock period with rounding up @@ -2573,7 +2573,7 @@ static int octeontx_mmc_set_ios(struct udevice *dev) err = octeontx_mmc_configure_delay(mmc); -#ifdef MMC_SUPPORTS_TUNING +#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING) if (!err && mmc->selected_mode == MMC_HS_400 && !slot->hs400_tuned) { debug("%s: Tuning HS400 mode\n", __func__); err = octeontx_tune_hs400(mmc); @@ -3776,7 +3776,7 @@ static const struct dm_mmc_ops octeontx_hsmmc_ops = { .set_ios = octeontx_mmc_set_ios, .get_cd = octeontx_mmc_get_cd, .get_wp = octeontx_mmc_get_wp, -#ifdef MMC_SUPPORTS_TUNING +#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING) .execute_tuning = octeontx_mmc_execute_tuning, #endif }; diff --git a/drivers/mmc/omap_hsmmc.c b/drivers/mmc/omap_hsmmc.c index 99f21b2c546a..118d9cd16fdb 100644 --- a/drivers/mmc/omap_hsmmc.c +++ b/drivers/mmc/omap_hsmmc.c @@ -577,7 +577,7 @@ static uint32_t omap_hsmmc_set_capabilities(struct mmc *mmc) return val; } -#ifdef MMC_SUPPORTS_TUNING +#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING) static void omap_hsmmc_disable_tuning(struct mmc *mmc) { struct hsmmc *mmc_base; @@ -1518,7 +1518,7 @@ static const struct dm_mmc_ops omap_hsmmc_ops = { .get_cd = omap_hsmmc_getcd, .get_wp = omap_hsmmc_getwp, #endif -#ifdef MMC_SUPPORTS_TUNING +#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING) .execute_tuning = omap_hsmmc_execute_tuning, #endif .wait_dat0 = omap_hsmmc_wait_dat0, diff --git a/drivers/mmc/sdhci-cadence.c b/drivers/mmc/sdhci-cadence.c index c0a9f60b1496..0570dbca00d7 100644 --- a/drivers/mmc/sdhci-cadence.c +++ b/drivers/mmc/sdhci-cadence.c @@ -274,7 +274,7 @@ static int sdhci_cdns_probe(struct udevice *dev) host->ops = &sdhci_cdns_ops; host->quirks |= SDHCI_QUIRK_WAIT_SEND_CMD; sdhci_cdns_mmc_ops = sdhci_ops; -#ifdef MMC_SUPPORTS_TUNING +#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING) sdhci_cdns_mmc_ops.execute_tuning = sdhci_cdns_execute_tuning; #endif diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c index af654ea8d13c..d06f2c02bb7b 100644 --- a/drivers/mmc/sdhci.c +++ b/drivers/mmc/sdhci.c @@ -351,7 +351,7 @@ static int sdhci_send_command(struct mmc *mmc, struct mmc_cmd *cmd, return -ECOMM; } -#if defined(CONFIG_DM_MMC) && defined(MMC_SUPPORTS_TUNING) +#if defined(CONFIG_DM_MMC) && CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING) static int sdhci_execute_tuning(struct udevice *dev, uint opcode) { int err; @@ -848,7 +848,7 @@ const struct dm_mmc_ops sdhci_ops = { .set_ios = sdhci_set_ios, .get_cd = sdhci_get_cd, .deferred_probe = sdhci_deferred_probe, -#ifdef MMC_SUPPORTS_TUNING +#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING) .execute_tuning = sdhci_execute_tuning, #endif .wait_dat0 = sdhci_wait_dat0, diff --git a/include/configs/mt7621.h b/include/configs/mt7621.h index bf2bc2d45c09..e6dba7071950 100644 --- a/include/configs/mt7621.h +++ b/include/configs/mt7621.h @@ -14,9 +14,6 @@ #define CFG_SYS_INIT_SP_OFFSET 0x800000 -/* MMC */ -#define MMC_SUPPORTS_TUNING - /* Serial SPL */ #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_SERIAL) #define CFG_SYS_NS16550_CLK 50000000 diff --git a/include/configs/mt7623.h b/include/configs/mt7623.h index fca234a1dc71..6f42cd32d80f 100644 --- a/include/configs/mt7623.h +++ b/include/configs/mt7623.h @@ -11,9 +11,6 @@ #include <linux/sizes.h> -/* MMC */ -#define MMC_SUPPORTS_TUNING - /* DRAM */ #define CFG_SYS_SDRAM_BASE 0x80000000 diff --git a/include/configs/octeontx2_common.h b/include/configs/octeontx2_common.h index c4db38562d83..f415dffddbea 100644 --- a/include/configs/octeontx2_common.h +++ b/include/configs/octeontx2_common.h @@ -19,9 +19,4 @@ "loadaddr=20080000\0" \ "ethrotate=yes\0" -#if defined(CONFIG_MMC_OCTEONTX) -#define MMC_SUPPORTS_TUNING -/** EMMC specific defines */ -#endif - #endif /* __OCTEONTX2_COMMON_H__ */ diff --git a/include/mmc.h b/include/mmc.h index 4b8327f1f93b..7f1900363b91 100644 --- a/include/mmc.h +++ b/include/mmc.h @@ -18,13 +18,6 @@ struct bd_info; -#if CONFIG_IS_ENABLED(MMC_HS200_SUPPORT) -#define MMC_SUPPORTS_TUNING -#endif -#if CONFIG_IS_ENABLED(MMC_UHS_SUPPORT) -#define MMC_SUPPORTS_TUNING -#endif - /* SD/MMC version bits; 8 flags, 8 major, 8 minor, 8 change */ #define SD_VERSION_SD (1U << 31) #define MMC_VERSION_MMC (1U << 30) @@ -485,7 +478,7 @@ struct dm_mmc_ops { */ int (*get_wp)(struct udevice *dev); -#ifdef MMC_SUPPORTS_TUNING +#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING) /** * execute_tuning() - Start the tuning process * -- 2.34.1

15 135

[PATCH v3 0/5] board: starfive: add Milk-V Mars CM support
by Heinrich Schuchardt 09 May '24

09 May '24

With this series the Milk-V Mars CM board can be booted. NVMe, SD-card, Ethernet, UART are working but not USB. The first series Milk-V Mars CM Lite board (the version without eMMC) uses incorrect series numbers indicating eMMC presence. For these CONFIG_STARFIVE_NO_EMMC=y must be set to indicate that eMMC is not present. Thanks to E. Shattow for all the helpful discussions. He figured out what needed to be patched in the device-tree. v3: Add mac vendor sub-command Documentation fixes v2: fix typos in get_mmc_size_from_eeprom() description rename spl_fdt_fixup_marc() to spl_fdt_fixup_mars_cm() rename device-trees for Mars CM and Mars CM Lite change model and compatible properties refer to tio as tool for booting via UART describe how to update serial number Heinrich Schuchardt (5): board: starfive: function to read eMMC size board: add support for Milk-V Mars CM doc: Milk-V Mars CM and Milk-V Mars CM Lite configs: visionfive2: enable SPL_YMODEM_SUPPORT starfive: add mac vendor sub-command arch/riscv/include/asm/arch-jh7110/eeprom.h | 7 + board/starfive/visionfive2/Kconfig | 9 + board/starfive/visionfive2/spl.c | 28 ++- .../visionfive2/starfive_visionfive2.c | 11 +- .../visionfive2/visionfive2-i2c-eeprom.c | 43 +++- configs/starfive_visionfive2_defconfig | 1 + doc/board/starfive/index.rst | 1 + doc/board/starfive/milk-v_mars_cm.rst | 193 ++++++++++++++++++ 8 files changed, 290 insertions(+), 3 deletions(-) create mode 100644 doc/board/starfive/milk-v_mars_cm.rst -- 2.43.0

2 6

[PATCH v1] rockchip: rv1126: Migrate to OF_UPSTREAM
by Anand Moon 09 May '24

09 May '24

Migrate RV1126 boards that exists in Linux v6.8 to use OF_UPSTREAM. Following targets is not migrated to use OF_UPSTREAM: - rv1126-edgeble-neu2 : Board is an industrial form factor IO board. - sonoff-ihost-rv1126 : Gateway device designed to provide a Smart Home Hub. Cc: Tim Lunn <tim(a)feathertop.org> Cc: Jagan Teki <jagan(a)edgeble.ai> Signed-off-by: Anand Moon <linux.amoon(a)gmail.com> --- Tested on neu2 edgable board. --- arch/arm/dts/Makefile | 3 - arch/arm/dts/rv1126-edgeble-neu2-io.dts | 112 ----- arch/arm/dts/rv1126-edgeble-neu2.dtsi | 345 ------------- arch/arm/dts/rv1126-pinctrl.dtsi | 341 ------------- arch/arm/dts/rv1126-sonoff-ihost.dts | 29 -- arch/arm/dts/rv1126-sonoff-ihost.dtsi | 404 --------------- arch/arm/dts/rv1126.dtsi | 623 ------------------------ arch/arm/mach-rockchip/Kconfig | 1 + configs/neu2-io-rv1126_defconfig | 2 +- configs/sonoff-ihost-rv1126_defconfig | 2 +- 10 files changed, 3 insertions(+), 1859 deletions(-) delete mode 100644 arch/arm/dts/rv1126-edgeble-neu2-io.dts delete mode 100644 arch/arm/dts/rv1126-edgeble-neu2.dtsi delete mode 100644 arch/arm/dts/rv1126-pinctrl.dtsi delete mode 100644 arch/arm/dts/rv1126-sonoff-ihost.dts delete mode 100644 arch/arm/dts/rv1126-sonoff-ihost.dtsi delete mode 100644 arch/arm/dts/rv1126.dtsi diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 087645f354..79fc100dce 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -97,9 +97,6 @@ dtb-$(CONFIG_ROCKCHIP_RK3368) += \ rk3368-geekbox.dtb \ rk3368-px5-evb.dtb \ -dtb-$(CONFIG_ROCKCHIP_RV1126) += \ - rv1126-edgeble-neu2-io.dtb - dtb-$(CONFIG_ARCH_S5P4418) += \ s5p4418-nanopi2.dtb diff --git a/arch/arm/dts/rv1126-edgeble-neu2-io.dts b/arch/arm/dts/rv1126-edgeble-neu2-io.dts deleted file mode 100644 index 0c2396b8f8..0000000000 --- a/arch/arm/dts/rv1126-edgeble-neu2-io.dts +++ /dev/null @@ -1,112 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2020 Rockchip Electronics Co., Ltd. - * Copyright (c) 2022 Edgeble AI Technologies Pvt. Ltd. - */ - -/dts-v1/; -#include "rv1126.dtsi" -#include "rv1126-edgeble-neu2.dtsi" - -/ { - model = "Edgeble Neu2 IO Board"; - compatible = "edgeble,neural-compute-module-2-io", - "edgeble,neural-compute-module-2", "rockchip,rv1126"; - - aliases { - serial2 = &uart2; - }; - - chosen { - stdout-path = "serial2:1500000n8"; - }; - - vcc12v_dcin: vcc12v-dcin-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc12v_dcin"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - }; - - vcc5v0_sys: vcc5v0-sys-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc12v_dcin>; - }; - - v3v3_sys: v3v3-sys-regulator { - compatible = "regulator-fixed"; - regulator-name = "v3v3_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vcc5v0_sys>; - }; -}; - -&gmac { - assigned-clocks = <&cru CLK_GMAC_SRC>, <&cru CLK_GMAC_TX_RX>, - <&cru CLK_GMAC_ETHERNET_OUT>; - assigned-clock-parents = <&cru CLK_GMAC_SRC_M1>, <&cru RGMII_MODE_CLK>; - assigned-clock-rates = <125000000>, <0>, <25000000>; - clock_in_out = "input"; - phy-handle = <&phy>; - phy-mode = "rgmii"; - phy-supply = <&vcc_3v3>; - pinctrl-names = "default"; - pinctrl-0 = <&rgmiim1_miim &rgmiim1_bus2 &rgmiim1_bus4 &clk_out_ethernetm1_pins>; - tx_delay = <0x2a>; - rx_delay = <0x1a>; - status = "okay"; -}; - -&mdio { - phy: ethernet-phy@0 { - compatible = "ethernet-phy-id001c.c916", - "ethernet-phy-ieee802.3-c22"; - reg = <0x0>; - pinctrl-names = "default"; - pinctrl-0 = <&eth_phy_rst>; - reset-assert-us = <20000>; - reset-deassert-us = <100000>; - reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>; - }; -}; - -&pinctrl { - ethernet { - eth_phy_rst: eth-phy-rst { - rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; - }; - }; -}; - -&pwm11 { - status = "okay"; -}; - -&sdmmc { - bus-width = <4>; - cap-mmc-highspeed; - cap-sd-highspeed; - card-detect-delay = <200>; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_bus4 &sdmmc0_det>; - rockchip,default-sample-phase = <90>; - sd-uhs-sdr12; - sd-uhs-sdr25; - sd-uhs-sdr104; - vqmmc-supply = <&vccio_sd>; - status = "okay"; -}; - -&uart2 { - status = "okay"; -}; diff --git a/arch/arm/dts/rv1126-edgeble-neu2.dtsi b/arch/arm/dts/rv1126-edgeble-neu2.dtsi deleted file mode 100644 index 7ea8d7d16f..0000000000 --- a/arch/arm/dts/rv1126-edgeble-neu2.dtsi +++ /dev/null @@ -1,345 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2020 Rockchip Electronics Co., Ltd. - * Copyright (c) 2022 Edgeble AI Technologies Pvt. Ltd. - */ - -/ { - compatible = "edgeble,neural-compute-module-2", "rockchip,rv1126"; - - aliases { - mmc0 = &emmc; - }; - - vccio_flash: vccio-flash-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&flash_vol_sel>; - regulator-name = "vccio_flash"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc_3v3>; - }; - - sdio_pwrseq: pwrseq-sdio { - compatible = "mmc-pwrseq-simple"; - clocks = <&rk809 1>; - clock-names = "ext_clock"; - pinctrl-names = "default"; - pinctrl-0 = <&wifi_enable_h>; - reset-gpios = <&gpio1 RK_PD0 GPIO_ACTIVE_LOW>; - }; -}; - -&cpu0 { - cpu-supply = <&vdd_arm>; -}; - -&emmc { - bus-width = <8>; - non-removable; - pinctrl-names = "default"; - pinctrl-0 = <&emmc_bus8 &emmc_cmd &emmc_clk>; - rockchip,default-sample-phase = <90>; - vmmc-supply = <&vcc_3v3>; - vqmmc-supply = <&vccio_flash>; - status = "okay"; -}; - -&i2c0 { - clock-frequency = <400000>; - status = "okay"; - - rk809: pmic@20 { - compatible = "rockchip,rk809"; - reg = <0x20>; - interrupt-parent = <&gpio0>; - interrupts = <RK_PB1 IRQ_TYPE_LEVEL_LOW>; - #clock-cells = <1>; - clock-output-names = "rk808-clkout1", "rk808-clkout2"; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_int_l>; - rockchip,system-power-controller; - wakeup-source; - - vcc1-supply = <&vcc5v0_sys>; - vcc2-supply = <&vcc5v0_sys>; - vcc3-supply = <&vcc5v0_sys>; - vcc4-supply = <&vcc5v0_sys>; - vcc5-supply = <&vcc_buck5>; - vcc6-supply = <&vcc_buck5>; - vcc7-supply = <&vcc5v0_sys>; - vcc8-supply = <&vcc3v3_sys>; - vcc9-supply = <&vcc5v0_sys>; - - regulators { - vdd_npu_vepu: DCDC_REG1 { - regulator-name = "vdd_npu_vepu"; - regulator-always-on; - regulator-boot-on; - regulator-initial-mode = <0x2>; - regulator-min-microvolt = <650000>; - regulator-max-microvolt = <950000>; - regulator-ramp-delay = <6001>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_arm: DCDC_REG2 { - regulator-name = "vdd_arm"; - regulator-always-on; - regulator-boot-on; - regulator-initial-mode = <0x2>; - regulator-min-microvolt = <725000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_ddr: DCDC_REG3 { - regulator-name = "vcc_ddr"; - regulator-always-on; - regulator-boot-on; - regulator-initial-mode = <0x2>; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vcc3v3_sys: DCDC_REG4 { - regulator-name = "vcc3v3_sys"; - regulator-always-on; - regulator-boot-on; - regulator-initial-mode = <0x2>; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcc_buck5: DCDC_REG5 { - regulator-name = "vcc_buck5"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <2200000>; - regulator-max-microvolt = <2200000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <2200000>; - }; - }; - - vcc_0v8: LDO_REG1 { - regulator-name = "vcc_0v8"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <800000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc1v8_pmu: LDO_REG2 { - regulator-name = "vcc1v8_pmu"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vdd0v8_pmu: LDO_REG3 { - regulator-name = "vcc0v8_pmu"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <800000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <800000>; - }; - }; - - vcc_1v8: LDO_REG4 { - regulator-name = "vcc_1v8"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcc_dovdd: LDO_REG5 { - regulator-name = "vcc_dovdd"; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_dvdd: LDO_REG6 { - regulator-name = "vcc_dvdd"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_avdd: LDO_REG7 { - regulator-name = "vcc_avdd"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vccio_sd: LDO_REG8 { - regulator-name = "vccio_sd"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc3v3_sd: LDO_REG9 { - regulator-name = "vcc3v3_sd"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_5v0: SWITCH_REG1 { - regulator-name = "vcc_5v0"; - }; - - vcc_3v3: SWITCH_REG2 { - regulator-name = "vcc_3v3"; - regulator-always-on; - regulator-boot-on; - }; - }; - }; -}; - -&pinctrl { - bt { - bt_enable: bt-enable { - rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - flash { - flash_vol_sel: flash-vol-sel { - rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - pmic { - pmic_int_l: pmic-int-l { - rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - wifi { - wifi_enable_h: wifi-enable-h { - rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; -}; - -&pmu_io_domains { - pmuio0-supply = <&vcc1v8_pmu>; - pmuio1-supply = <&vcc3v3_sys>; - vccio1-supply = <&vccio_flash>; - vccio2-supply = <&vccio_sd>; - vccio3-supply = <&vcc_1v8>; - vccio4-supply = <&vcc_dovdd>; - vccio5-supply = <&vcc_1v8>; - vccio6-supply = <&vcc_1v8>; - vccio7-supply = <&vcc_dovdd>; - status = "okay"; -}; - -&saradc { - vref-supply = <&vcc_1v8>; - status = "okay"; -}; - -&sfc { - pinctrl-names = "default"; - pinctrl-0 = <&fspi_pins>; - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <50000000>; - spi-rx-bus-width = <4>; - spi-tx-bus-width = <1>; - }; -}; - -&sdio { - bus-width = <4>; - cap-sd-highspeed; - cap-sdio-irq; - keep-power-in-suspend; - max-frequency = <100000000>; - mmc-pwrseq = <&sdio_pwrseq>; - non-removable; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc1_clk &sdmmc1_cmd &sdmmc1_bus4>; - rockchip,default-sample-phase = <90>; - sd-uhs-sdr104; - vmmc-supply = <&vcc3v3_sys>; - vqmmc-supply = <&vcc_1v8>; - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_xfer &uart0_ctsn &uart0_rtsn>; - status = "okay"; - - bluetooth { - compatible = "qcom,qca9377-bt"; - clocks = <&rk809 1>; - enable-gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_HIGH>; /* BT_RST */ - max-speed = <2000000>; - pinctrl-names = "default"; - pinctrl-0 = <&bt_enable>; - vddxo-supply = <&vcc3v3_sys>; - vddio-supply = <&vcc_1v8>; - }; -}; diff --git a/arch/arm/dts/rv1126-pinctrl.dtsi b/arch/arm/dts/rv1126-pinctrl.dtsi deleted file mode 100644 index f84f5f2d96..0000000000 --- a/arch/arm/dts/rv1126-pinctrl.dtsi +++ /dev/null @@ -1,341 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2020 Fuzhou Rockchip Electronics Co., Ltd - */ - -#include <dt-bindings/pinctrl/rockchip.h> -#include "rockchip-pinconf.dtsi" - -/* - * This file is auto generated by pin2dts tool, please keep these code - * by adding changes at end of this file. - */ -&pinctrl { - clk_out_ethernet { - /omit-if-no-ref/ - clk_out_ethernetm1_pins: clk-out-ethernetm1-pins { - rockchip,pins = - /* clk_out_ethernet_m1 */ - <2 RK_PC5 2 &pcfg_pull_none>; - }; - }; - emmc { - /omit-if-no-ref/ - emmc_rstnout: emmc-rstnout { - rockchip,pins = - /* emmc_rstn */ - <1 RK_PA3 2 &pcfg_pull_none>; - }; - /omit-if-no-ref/ - emmc_bus8: emmc-bus8 { - rockchip,pins = - /* emmc_d0 */ - <0 RK_PC4 2 &pcfg_pull_up_drv_level_2>, - /* emmc_d1 */ - <0 RK_PC5 2 &pcfg_pull_up_drv_level_2>, - /* emmc_d2 */ - <0 RK_PC6 2 &pcfg_pull_up_drv_level_2>, - /* emmc_d3 */ - <0 RK_PC7 2 &pcfg_pull_up_drv_level_2>, - /* emmc_d4 */ - <0 RK_PD0 2 &pcfg_pull_up_drv_level_2>, - /* emmc_d5 */ - <0 RK_PD1 2 &pcfg_pull_up_drv_level_2>, - /* emmc_d6 */ - <0 RK_PD2 2 &pcfg_pull_up_drv_level_2>, - /* emmc_d7 */ - <0 RK_PD3 2 &pcfg_pull_up_drv_level_2>; - }; - /omit-if-no-ref/ - emmc_clk: emmc-clk { - rockchip,pins = - /* emmc_clko */ - <0 RK_PD7 2 &pcfg_pull_up_drv_level_2>; - }; - /omit-if-no-ref/ - emmc_cmd: emmc-cmd { - rockchip,pins = - /* emmc_cmd */ - <0 RK_PD5 2 &pcfg_pull_up_drv_level_2>; - }; - }; - fspi { - /omit-if-no-ref/ - fspi_pins: fspi-pins { - rockchip,pins = - /* fspi_clk */ - <1 RK_PA3 3 &pcfg_pull_down>, - /* fspi_cs0n */ - <0 RK_PD4 3 &pcfg_pull_up>, - /* fspi_d0 */ - <1 RK_PA0 3 &pcfg_pull_up>, - /* fspi_d1 */ - <1 RK_PA1 3 &pcfg_pull_up>, - /* fspi_d2 */ - <0 RK_PD6 3 &pcfg_pull_up>, - /* fspi_d3 */ - <1 RK_PA2 3 &pcfg_pull_up>; - }; - }; - i2c0 { - /omit-if-no-ref/ - i2c0_xfer: i2c0-xfer { - rockchip,pins = - /* i2c0_scl */ - <0 RK_PB4 1 &pcfg_pull_none_drv_level_0_smt>, - /* i2c0_sda */ - <0 RK_PB5 1 &pcfg_pull_none_drv_level_0_smt>; - }; - }; - i2c2 { - /omit-if-no-ref/ - i2c2_xfer: i2c2-xfer { - rockchip,pins = - /* i2c2_scl */ - <0 RK_PC2 1 &pcfg_pull_none_drv_level_0_smt>, - /* i2c2_sda */ - <0 RK_PC3 1 &pcfg_pull_none_drv_level_0_smt>; - }; - }; - pwm2 { - /omit-if-no-ref/ - pwm2m0_pins: pwm2m0-pins { - rockchip,pins = - /* pwm2_pin_m0 */ - <0 RK_PC0 3 &pcfg_pull_none>; - }; - }; - pwm11 { - /omit-if-no-ref/ - pwm11m0_pins: pwm11m0-pins { - rockchip,pins = - /* pwm11_pin_m0 */ - <3 RK_PA7 6 &pcfg_pull_none>; - }; - }; - rgmii { - /omit-if-no-ref/ - rgmiim1_miim: rgmiim1-miim { - rockchip,pins = - /* rgmii_mdc_m1 */ - <2 RK_PC2 2 &pcfg_pull_none>, - /* rgmii_mdio_m1 */ - <2 RK_PC1 2 &pcfg_pull_none>; - }; - /omit-if-no-ref/ - rgmiim1_rxer: rgmiim1-rxer { - rockchip,pins = - /* rgmii_rxer_m1 */ - <2 RK_PC0 2 &pcfg_pull_none>; - }; - /omit-if-no-ref/ - rgmiim1_bus2: rgmiim1-bus2 { - rockchip,pins = - /* rgmii_rxd0_m1 */ - <2 RK_PB5 2 &pcfg_pull_none>, - /* rgmii_rxd1_m1 */ - <2 RK_PB6 2 &pcfg_pull_none>, - /* rgmii_rxdv_m1 */ - <2 RK_PB4 2 &pcfg_pull_none>, - /* rgmii_txd0_m1 */ - <2 RK_PC3 2 &pcfg_pull_none_drv_level_3>, - /* rgmii_txd1_m1 */ - <2 RK_PC4 2 &pcfg_pull_none_drv_level_3>, - /* rgmii_txen_m1 */ - <2 RK_PC6 2 &pcfg_pull_none_drv_level_3>; - }; - /omit-if-no-ref/ - rgmiim1_bus4: rgmiim1-bus4 { - rockchip,pins = - /* rgmii_rxclk_m1 */ - <2 RK_PD3 2 &pcfg_pull_none>, - /* rgmii_rxd2_m1 */ - <2 RK_PC7 2 &pcfg_pull_none>, - /* rgmii_rxd3_m1 */ - <2 RK_PD0 2 &pcfg_pull_none>, - /* rgmii_txclk_m1 */ - <2 RK_PD2 2 &pcfg_pull_none_drv_level_3>, - /* rgmii_txd2_m1 */ - <2 RK_PD1 2 &pcfg_pull_none_drv_level_3>, - /* rgmii_txd3_m1 */ - <2 RK_PA4 2 &pcfg_pull_none_drv_level_3>; - }; - /omit-if-no-ref/ - rgmiim1_mclkinout: rgmiim1-mclkinout { - rockchip,pins = - /* rgmii_clk_m1 */ - <2 RK_PB7 2 &pcfg_pull_none>; - }; - }; - sdmmc0 { - /omit-if-no-ref/ - sdmmc0_bus4: sdmmc0-bus4 { - rockchip,pins = - /* sdmmc0_d0 */ - <1 RK_PA4 1 &pcfg_pull_up_drv_level_2>, - /* sdmmc0_d1 */ - <1 RK_PA5 1 &pcfg_pull_up_drv_level_2>, - /* sdmmc0_d2 */ - <1 RK_PA6 1 &pcfg_pull_up_drv_level_2>, - /* sdmmc0_d3 */ - <1 RK_PA7 1 &pcfg_pull_up_drv_level_2>; - }; - /omit-if-no-ref/ - sdmmc0_clk: sdmmc0-clk { - rockchip,pins = - /* sdmmc0_clk */ - <1 RK_PB0 1 &pcfg_pull_up_drv_level_2>; - }; - /omit-if-no-ref/ - sdmmc0_cmd: sdmmc0-cmd { - rockchip,pins = - /* sdmmc0_cmd */ - <1 RK_PB1 1 &pcfg_pull_up_drv_level_2>; - }; - /omit-if-no-ref/ - sdmmc0_det: sdmmc0-det { - rockchip,pins = - <0 RK_PA3 1 &pcfg_pull_none>; - }; - /omit-if-no-ref/ - sdmmc0_pwr: sdmmc0-pwr { - rockchip,pins = - <0 RK_PC0 1 &pcfg_pull_none>; - }; - }; - sdmmc1 { - /omit-if-no-ref/ - sdmmc1_bus4: sdmmc1-bus4 { - rockchip,pins = - /* sdmmc1_d0 */ - <1 RK_PB4 1 &pcfg_pull_up_drv_level_2>, - /* sdmmc1_d1 */ - <1 RK_PB5 1 &pcfg_pull_up_drv_level_2>, - /* sdmmc1_d2 */ - <1 RK_PB6 1 &pcfg_pull_up_drv_level_2>, - /* sdmmc1_d3 */ - <1 RK_PB7 1 &pcfg_pull_up_drv_level_2>; - }; - /omit-if-no-ref/ - sdmmc1_clk: sdmmc1-clk { - rockchip,pins = - /* sdmmc1_clk */ - <1 RK_PB2 1 &pcfg_pull_up_drv_level_2>; - }; - /omit-if-no-ref/ - sdmmc1_cmd: sdmmc1-cmd { - rockchip,pins = - /* sdmmc1_cmd */ - <1 RK_PB3 1 &pcfg_pull_up_drv_level_2>; - }; - /omit-if-no-ref/ - sdmmc1_det: sdmmc1-det { - rockchip,pins = - <1 RK_PD0 2 &pcfg_pull_none>; - }; - /omit-if-no-ref/ - sdmmc1_pwr: sdmmc1-pwr { - rockchip,pins = - <1 RK_PD1 2 &pcfg_pull_none>; - }; - }; - uart0 { - /omit-if-no-ref/ - uart0_xfer: uart0-xfer { - rockchip,pins = - /* uart0_rx */ - <1 RK_PC2 1 &pcfg_pull_up>, - /* uart0_tx */ - <1 RK_PC3 1 &pcfg_pull_up>; - }; - /omit-if-no-ref/ - uart0_ctsn: uart0-ctsn { - rockchip,pins = - <1 RK_PC1 1 &pcfg_pull_none>; - }; - /omit-if-no-ref/ - uart0_rtsn: uart0-rtsn { - rockchip,pins = - <1 RK_PC0 1 &pcfg_pull_none>; - }; - /omit-if-no-ref/ - uart0_rtsn_gpio: uart0-rts-pin { - rockchip,pins = - <1 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - uart1 { - /omit-if-no-ref/ - uart1m0_xfer: uart1m0-xfer { - rockchip,pins = - /* uart1_rx_m0 */ - <0 RK_PB7 2 &pcfg_pull_up>, - /* uart1_tx_m0 */ - <0 RK_PB6 2 &pcfg_pull_up>; - }; - }; - uart2 { - /omit-if-no-ref/ - uart2m1_xfer: uart2m1-xfer { - rockchip,pins = - /* uart2_rx_m1 */ - <3 RK_PA3 1 &pcfg_pull_up>, - /* uart2_tx_m1 */ - <3 RK_PA2 1 &pcfg_pull_up>; - }; - }; - uart3 { - /omit-if-no-ref/ - uart3m0_xfer: uart3m0-xfer { - rockchip,pins = - /* uart3_rx_m0 */ - <3 RK_PC7 4 &pcfg_pull_up>, - /* uart3_tx_m0 */ - <3 RK_PC6 4 &pcfg_pull_up>; - }; - /omit-if-no-ref/ - uart3m2_xfer: uart3m2-xfer { - rockchip,pins = - /* uart3_rx_m2 */ - <3 RK_PA1 4 &pcfg_pull_up>, - /* uart3_tx_m2 */ - <3 RK_PA0 4 &pcfg_pull_up>; - }; - }; - uart4 { - /omit-if-no-ref/ - uart4m0_xfer: uart4m0-xfer { - rockchip,pins = - /* uart4_rx_m0 */ - <3 RK_PA5 4 &pcfg_pull_up>, - /* uart4_tx_m0 */ - <3 RK_PA4 4 &pcfg_pull_up>; - }; - /omit-if-no-ref/ - uart4m2_xfer: uart4m2-xfer { - rockchip,pins = - /* uart4_rx_m2 */ - <1 RK_PD4 3 &pcfg_pull_up>, - /* uart4_tx_m2 */ - <1 RK_PD5 3 &pcfg_pull_up>; - }; - }; - uart5 { - /omit-if-no-ref/ - uart5m0_xfer: uart5m0-xfer { - rockchip,pins = - /* uart5_rx_m0 */ - <3 RK_PA7 4 &pcfg_pull_up>, - /* uart5_tx_m0 */ - <3 RK_PA6 4 &pcfg_pull_up>; - }; - /omit-if-no-ref/ - uart5m2_xfer: uart5m2-xfer { - rockchip,pins = - /* uart5_rx_m2 */ - <2 RK_PA1 3 &pcfg_pull_up>, - /* uart5_tx_m2 */ - <2 RK_PA0 3 &pcfg_pull_up>; - }; - }; -}; diff --git a/arch/arm/dts/rv1126-sonoff-ihost.dts b/arch/arm/dts/rv1126-sonoff-ihost.dts deleted file mode 100644 index 77386a48d8..0000000000 --- a/arch/arm/dts/rv1126-sonoff-ihost.dts +++ /dev/null @@ -1,29 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2020 Rockchip Electronics Co., Ltd. - */ - -/dts-v1/; -#include "rv1126.dtsi" -#include "rv1126-sonoff-ihost.dtsi" - -/ { - model = "Sonoff iHost 4G"; - compatible = "itead,sonoff-ihost", "rockchip,rv1126"; -}; - -&cpu0 { - cpu-supply = <&vdd_arm>; -}; - -&cpu1 { - cpu-supply = <&vdd_arm>; -}; - -&cpu2 { - cpu-supply = <&vdd_arm>; -}; - -&cpu3 { - cpu-supply = <&vdd_arm>; -}; diff --git a/arch/arm/dts/rv1126-sonoff-ihost.dtsi b/arch/arm/dts/rv1126-sonoff-ihost.dtsi deleted file mode 100644 index 32b329e87a..0000000000 --- a/arch/arm/dts/rv1126-sonoff-ihost.dtsi +++ /dev/null @@ -1,404 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2020 Rockchip Electronics Co., Ltd. - * Copyright (c) 2022 Edgeble AI Technologies Pvt. Ltd. - */ - -/ { - aliases { - ethernet0 = &gmac; - mmc0 = &emmc; - }; - - chosen { - stdout-path = "serial2:1500000n8"; - }; - - vcc5v0_sys: regulator-vcc5v0-sys { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - sdio_pwrseq: pwrseq-sdio { - compatible = "mmc-pwrseq-simple"; - clocks = <&rk809 1>; - clock-names = "ext_clock"; - pinctrl-names = "default"; - pinctrl-0 = <&wifi_enable_h>; - reset-gpios = <&gpio1 RK_PD0 GPIO_ACTIVE_LOW>; - }; -}; - -&emmc { - bus-width = <8>; - cap-mmc-highspeed; - mmc-hs200-1_8v; - non-removable; - pinctrl-names = "default"; - pinctrl-0 = <&emmc_bus8 &emmc_cmd &emmc_clk &emmc_rstnout>; - rockchip,default-sample-phase = <90>; - vmmc-supply = <&vcc_3v3>; - vqmmc-supply = <&vcc_1v8>; - status = "okay"; -}; - -&i2c0 { - clock-frequency = <400000>; - status = "okay"; - - rk809: pmic@20 { - compatible = "rockchip,rk809"; - reg = <0x20>; - interrupt-parent = <&gpio0>; - interrupts = <RK_PB1 IRQ_TYPE_LEVEL_LOW>; - #clock-cells = <1>; - clock-output-names = "rk808-clkout1", "rk808-clkout2"; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_int_l>; - rockchip,system-power-controller; - wakeup-source; - - vcc1-supply = <&vcc5v0_sys>; - vcc2-supply = <&vcc5v0_sys>; - vcc3-supply = <&vcc5v0_sys>; - vcc4-supply = <&vcc5v0_sys>; - vcc5-supply = <&vcc_buck5>; - vcc6-supply = <&vcc_buck5>; - vcc7-supply = <&vcc5v0_sys>; - vcc8-supply = <&vcc3v3_sys>; - vcc9-supply = <&vcc5v0_sys>; - - regulators { - vdd_npu_vepu: DCDC_REG1 { - regulator-name = "vdd_npu_vepu"; - regulator-always-on; - regulator-boot-on; - regulator-initial-mode = <0x2>; - regulator-min-microvolt = <650000>; - regulator-max-microvolt = <950000>; - regulator-ramp-delay = <6001>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_arm: DCDC_REG2 { - regulator-name = "vdd_arm"; - regulator-always-on; - regulator-boot-on; - regulator-initial-mode = <0x2>; - regulator-min-microvolt = <725000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_ddr: DCDC_REG3 { - regulator-name = "vcc_ddr"; - regulator-always-on; - regulator-boot-on; - regulator-initial-mode = <0x2>; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vcc3v3_sys: DCDC_REG4 { - regulator-name = "vcc3v3_sys"; - regulator-always-on; - regulator-boot-on; - regulator-initial-mode = <0x2>; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcc_buck5: DCDC_REG5 { - regulator-name = "vcc_buck5"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <2200000>; - regulator-max-microvolt = <2200000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <2200000>; - }; - }; - - vcc_0v8: LDO_REG1 { - regulator-name = "vcc_0v8"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <800000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc1v8_pmu: LDO_REG2 { - regulator-name = "vcc1v8_pmu"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vdd0v8_pmu: LDO_REG3 { - regulator-name = "vcc0v8_pmu"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <800000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <800000>; - }; - }; - - vcc_1v8: LDO_REG4 { - regulator-name = "vcc_1v8"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcc_dovdd: LDO_REG5 { - regulator-name = "vcc_dovdd"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_dvdd: LDO_REG6 { - regulator-name = "vcc_dvdd"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_avdd: LDO_REG7 { - regulator-name = "vcc_avdd"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vccio_sd: LDO_REG8 { - regulator-name = "vccio_sd"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc3v3_sd: LDO_REG9 { - regulator-name = "vcc3v3_sd"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_5v0: SWITCH_REG1 { - regulator-name = "vcc_5v0"; - }; - - vcc_3v3: SWITCH_REG2 { - regulator-name = "vcc_3v3"; - regulator-always-on; - regulator-boot-on; - }; - }; - }; -}; - -&i2c2 { - status = "okay"; - clock-frequency = <400000>; - - pcf8563: rtc@51 { - compatible = "nxp,pcf8563"; - reg = <0x51>; - #clock-cells = <0>; - interrupt-parent = <&gpio0>; - interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>; - clock-output-names = "xin32k"; - }; -}; - -&gmac { - assigned-clocks = <&cru CLK_GMAC_SRC_M1>, <&cru CLK_GMAC_SRC>, - <&cru CLK_GMAC_TX_RX>; - assigned-clock-parents = <&cru CLK_GMAC_RGMII_M1>, <&cru CLK_GMAC_SRC_M1>, - <&cru RMII_MODE_CLK>; - assigned-clock-rates = <0>, <50000000>; - clock_in_out = "output"; - phy-handle = <&phy>; - phy-mode = "rmii"; - phy-supply = <&vcc_3v3>; - pinctrl-names = "default"; - pinctrl-0 = <&rgmiim1_miim &rgmiim1_rxer &rgmiim1_bus2 &rgmiim1_mclkinout>; - status = "okay"; -}; - -&mdio { - phy: ethernet-phy@0 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <0x0>; - pinctrl-names = "default"; - pinctrl-0 = <&eth_phy_rst>; - reset-active-low; - reset-assert-us = <50000>; - reset-deassert-us = <10000>; - reset-gpios = <&gpio2 RK_PA6 GPIO_ACTIVE_LOW>; - }; -}; - -&pinctrl { - ethernet { - eth_phy_rst: eth-phy-rst { - rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_down>; - }; - }; - bt { - bt_enable: bt-enable { - rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - bt_wake_dev: bt-wake-dev { - rockchip,pins = <1 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - bt_wake_host: bt-wake-host { - rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - pmic { - pmic_int_l: pmic-int-l { - rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - wifi { - wifi_enable_h: wifi-enable-h { - rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; -}; - -&pmu_io_domains { - pmuio0-supply = <&vcc1v8_pmu>; - pmuio1-supply = <&vcc3v3_sys>; - vccio1-supply = <&vcc_1v8>; - vccio2-supply = <&vccio_sd>; - vccio3-supply = <&vcc_1v8>; - vccio4-supply = <&vcc_dovdd>; - vccio5-supply = <&vcc_1v8>; - vccio6-supply = <&vcc_1v8>; - vccio7-supply = <&vcc_dovdd>; - status = "okay"; -}; - -&saradc { - vref-supply = <&vcc_1v8>; - status = "okay"; -}; - -&sdio { - bus-width = <4>; - cap-sd-highspeed; - cap-sdio-irq; - keep-power-in-suspend; - max-frequency = <100000000>; - mmc-pwrseq = <&sdio_pwrseq>; - non-removable; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc1_clk &sdmmc1_cmd &sdmmc1_bus4>; - rockchip,default-sample-phase = <90>; - sd-uhs-sdr104; - vmmc-supply = <&vcc3v3_sys>; - vqmmc-supply = <&vcc_1v8>; - status = "okay"; -}; - -&sdmmc { - bus-width = <4>; - cap-mmc-highspeed; - cap-sd-highspeed; - card-detect-delay = <200>; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_bus4 &sdmmc0_det>; - rockchip,default-sample-phase = <90>; - sd-uhs-sdr12; - sd-uhs-sdr25; - sd-uhs-sdr104; - vqmmc-supply = <&vccio_sd>; - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_xfer &uart0_ctsn &uart0_rtsn>; - uart-has-rtscts; - status = "okay"; - - bluetooth { - compatible = "realtek,rtl8723ds-bt"; - device-wake-gpios = <&gpio1 RK_PC7 GPIO_ACTIVE_HIGH>; /* BT_WAKE */ - enable-gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>; /* BT_RST */ - host-wake-gpios = <&gpio1 RK_PC5 GPIO_ACTIVE_HIGH>; /* BT_WAKE_HOST */ - max-speed = <2000000>; - pinctrl-names = "default"; - pinctrl-0 = <&bt_enable>, <&bt_wake_dev>, <&bt_wake_host>; - }; -}; - -&uart2 { - status = "okay"; -}; - -&uart3 { - pinctrl-names = "default"; - pinctrl-0 = <&uart3m2_xfer>; - status = "okay"; -}; - -&uart4 { - pinctrl-names = "default"; - pinctrl-0 = <&uart4m2_xfer>; - status = "okay"; -}; diff --git a/arch/arm/dts/rv1126.dtsi b/arch/arm/dts/rv1126.dtsi deleted file mode 100644 index bb603cae13..0000000000 --- a/arch/arm/dts/rv1126.dtsi +++ /dev/null @@ -1,623 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd. - */ - -#include <dt-bindings/clock/rockchip,rv1126-cru.h> -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/pinctrl/rockchip.h> -#include <dt-bindings/power/rockchip,rv1126-power.h> -#include <dt-bindings/soc/rockchip,boot-mode.h> - -/ { - #address-cells = <1>; - #size-cells = <1>; - - compatible = "rockchip,rv1126"; - - interrupt-parent = <&gic>; - - aliases { - i2c0 = &i2c0; - i2c2 = &i2c2; - serial0 = &uart0; - serial1 = &uart1; - serial2 = &uart2; - serial3 = &uart3; - serial4 = &uart4; - serial5 = &uart5; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu0: cpu@f00 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; - reg = <0xf00>; - enable-method = "psci"; - clocks = <&cru ARMCLK>; - }; - - cpu1: cpu@f01 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; - reg = <0xf01>; - enable-method = "psci"; - clocks = <&cru ARMCLK>; - }; - - cpu2: cpu@f02 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; - reg = <0xf02>; - enable-method = "psci"; - clocks = <&cru ARMCLK>; - }; - - cpu3: cpu@f03 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; - reg = <0xf03>; - enable-method = "psci"; - clocks = <&cru ARMCLK>; - }; - }; - - arm-pmu { - compatible = "arm,cortex-a7-pmu"; - interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; - interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; - }; - - psci { - compatible = "arm,psci-1.0"; - method = "smc"; - }; - - timer { - compatible = "arm,armv7-timer"; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, - <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, - <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, - <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; - clock-frequency = <24000000>; - }; - - display_subsystem { - compatible = "rockchip,display-subsystem"; - ports = <&vop_out>; - }; - - xin24m: oscillator { - compatible = "fixed-clock"; - clock-frequency = <24000000>; - clock-output-names = "xin24m"; - #clock-cells = <0>; - }; - - grf: syscon@fe000000 { - compatible = "rockchip,rv1126-grf", "syscon", "simple-mfd"; - reg = <0xfe000000 0x20000>; - }; - - pmugrf: syscon@fe020000 { - compatible = "rockchip,rv1126-pmugrf", "syscon", "simple-mfd"; - reg = <0xfe020000 0x1000>; - - pmu_io_domains: io-domains { - compatible = "rockchip,rv1126-pmu-io-voltage-domain"; - status = "disabled"; - }; - }; - - qos_emmc: qos@fe860000 { - compatible = "rockchip,rv1126-qos", "syscon"; - reg = <0xfe860000 0x20>; - }; - - qos_nandc: qos@fe860080 { - compatible = "rockchip,rv1126-qos", "syscon"; - reg = <0xfe860080 0x20>; - }; - - qos_sfc: qos@fe860200 { - compatible = "rockchip,rv1126-qos", "syscon"; - reg = <0xfe860200 0x20>; - }; - - qos_sdio: qos@fe86c000 { - compatible = "rockchip,rv1126-qos", "syscon"; - reg = <0xfe86c000 0x20>; - }; - - qos_iep: qos@fe8a0000 { - compatible = "rockchip,rv1126-qos", "syscon"; - reg = <0xfe8a0000 0x20>; - }; - - qos_rga_rd: qos@fe8a0080 { - compatible = "rockchip,rv1126-qos", "syscon"; - reg = <0xfe8a0080 0x20>; - }; - - qos_rga_wr: qos@fe8a0100 { - compatible = "rockchip,rv1126-qos", "syscon"; - reg = <0xfe8a0100 0x20>; - }; - - qos_vop: qos@fe8a0180 { - compatible = "rockchip,rv1126-qos", "syscon"; - reg = <0xfe8a0180 0x20>; - }; - - gic: interrupt-controller@feff0000 { - compatible = "arm,gic-400"; - interrupt-controller; - #interrupt-cells = <3>; - #address-cells = <0>; - - reg = <0xfeff1000 0x1000>, - <0xfeff2000 0x2000>, - <0xfeff4000 0x2000>, - <0xfeff6000 0x2000>; - interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; - }; - - pmu: power-management@ff3e0000 { - compatible = "rockchip,rv1126-pmu", "syscon", "simple-mfd"; - reg = <0xff3e0000 0x1000>; - - power: power-controller { - compatible = "rockchip,rv1126-power-controller"; - #power-domain-cells = <1>; - #address-cells = <1>; - #size-cells = <0>; - - power-domain@RV1126_PD_NVM { - reg = <RV1126_PD_NVM>; - clocks = <&cru HCLK_EMMC>, - <&cru CLK_EMMC>, - <&cru HCLK_NANDC>, - <&cru CLK_NANDC>, - <&cru HCLK_SFC>, - <&cru HCLK_SFCXIP>, - <&cru SCLK_SFC>; - pm_qos = <&qos_emmc>, - <&qos_nandc>, - <&qos_sfc>; - #power-domain-cells = <0>; - }; - - power-domain@RV1126_PD_SDIO { - reg = <RV1126_PD_SDIO>; - clocks = <&cru HCLK_SDIO>, - <&cru CLK_SDIO>; - pm_qos = <&qos_sdio>; - #power-domain-cells = <0>; - }; - - power-domain@RV1126_PD_VO { - reg = <RV1126_PD_VO>; - clocks = <&cru ACLK_RGA>, - <&cru HCLK_RGA>, - <&cru CLK_RGA_CORE>, - <&cru ACLK_VOP>, - <&cru HCLK_VOP>, - <&cru DCLK_VOP>, - <&cru PCLK_DSIHOST>, - <&cru ACLK_IEP>, - <&cru HCLK_IEP>, - <&cru CLK_IEP_CORE>; - pm_qos = <&qos_rga_rd>, - <&qos_rga_wr>, - <&qos_vop>, - <&qos_iep>; - #power-domain-cells = <0>; - }; - }; - }; - - i2c0: i2c@ff3f0000 { - compatible = "rockchip,rv1126-i2c", "rockchip,rk3399-i2c"; - reg = <0xff3f0000 0x1000>; - interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; - rockchip,grf = <&pmugrf>; - clocks = <&pmucru CLK_I2C0>, <&pmucru PCLK_I2C0>; - clock-names = "i2c", "pclk"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_xfer>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c2: i2c@ff400000 { - compatible = "rockchip,rv1126-i2c", "rockchip,rk3399-i2c"; - reg = <0xff400000 0x1000>; - interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; - rockchip,grf = <&pmugrf>; - clocks = <&pmucru CLK_I2C2>, <&pmucru PCLK_I2C2>; - clock-names = "i2c", "pclk"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_xfer>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - uart1: serial@ff410000 { - compatible = "rockchip,rv1126-uart", "snps,dw-apb-uart"; - reg = <0xff410000 0x100>; - interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; - clock-frequency = <24000000>; - clocks = <&pmucru SCLK_UART1>, <&pmucru PCLK_UART1>; - clock-names = "baudclk", "apb_pclk"; - dmas = <&dmac 7>, <&dmac 6>; - dma-names = "tx", "rx"; - pinctrl-names = "default"; - pinctrl-0 = <&uart1m0_xfer>; - reg-shift = <2>; - reg-io-width = <4>; - status = "disabled"; - }; - - pwm2: pwm@ff430020 { - compatible = "rockchip,rv1126-pwm", "rockchip,rk3328-pwm"; - reg = <0xff430020 0x10>; - clock-names = "pwm", "pclk"; - clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>; - pinctrl-names = "default"; - pinctrl-0 = <&pwm2m0_pins>; - #pwm-cells = <3>; - status = "disabled"; - }; - - pmucru: clock-controller@ff480000 { - compatible = "rockchip,rv1126-pmucru"; - reg = <0xff480000 0x1000>; - rockchip,grf = <&grf>; - #clock-cells = <1>; - #reset-cells = <1>; - }; - - cru: clock-controller@ff490000 { - compatible = "rockchip,rv1126-cru"; - reg = <0xff490000 0x1000>; - clocks = <&xin24m>; - clock-names = "xin24m"; - rockchip,grf = <&grf>; - #clock-cells = <1>; - #reset-cells = <1>; - }; - - dmac: dma-controller@ff4e0000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0xff4e0000 0x4000>; - interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; - #dma-cells = <1>; - arm,pl330-periph-burst; - clocks = <&cru ACLK_DMAC>; - clock-names = "apb_pclk"; - }; - - pwm11: pwm@ff550030 { - compatible = "rockchip,rv1126-pwm", "rockchip,rk3328-pwm"; - reg = <0xff550030 0x10>; - clock-names = "pwm", "pclk"; - clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>; - pinctrl-0 = <&pwm11m0_pins>; - pinctrl-names = "default"; - #pwm-cells = <3>; - status = "disabled"; - }; - - uart0: serial@ff560000 { - compatible = "rockchip,rv1126-uart", "snps,dw-apb-uart"; - reg = <0xff560000 0x100>; - interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; - clock-frequency = <24000000>; - clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>; - clock-names = "baudclk", "apb_pclk"; - dmas = <&dmac 5>, <&dmac 4>; - dma-names = "tx", "rx"; - pinctrl-names = "default"; - pinctrl-0 = <&uart0_xfer>; - reg-shift = <2>; - reg-io-width = <4>; - status = "disabled"; - }; - - uart2: serial@ff570000 { - compatible = "rockchip,rv1126-uart", "snps,dw-apb-uart"; - reg = <0xff570000 0x100>; - interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; - clock-frequency = <24000000>; - clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>; - clock-names = "baudclk", "apb_pclk"; - dmas = <&dmac 9>, <&dmac 8>; - dma-names = "tx", "rx"; - pinctrl-names = "default"; - pinctrl-0 = <&uart2m1_xfer>; - reg-shift = <2>; - reg-io-width = <4>; - status = "disabled"; - }; - - uart3: serial@ff580000 { - compatible = "rockchip,rv1126-uart", "snps,dw-apb-uart"; - reg = <0xff580000 0x100>; - interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; - clock-frequency = <24000000>; - clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>; - clock-names = "baudclk", "apb_pclk"; - dmas = <&dmac 11>, <&dmac 10>; - dma-names = "tx", "rx"; - pinctrl-names = "default"; - pinctrl-0 = <&uart3m0_xfer>; - reg-shift = <2>; - reg-io-width = <4>; - status = "disabled"; - }; - - uart4: serial@ff590000 { - compatible = "rockchip,rv1126-uart", "snps,dw-apb-uart"; - reg = <0xff590000 0x100>; - interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; - clock-frequency = <24000000>; - clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>; - clock-names = "baudclk", "apb_pclk"; - dmas = <&dmac 13>, <&dmac 12>; - dma-names = "tx", "rx"; - pinctrl-names = "default"; - pinctrl-0 = <&uart4m0_xfer>; - reg-shift = <2>; - reg-io-width = <4>; - status = "disabled"; - }; - - uart5: serial@ff5a0000 { - compatible = "rockchip,rv1126-uart", "snps,dw-apb-uart"; - reg = <0xff5a0000 0x100>; - interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; - clock-frequency = <24000000>; - clocks = <&cru SCLK_UART5>, <&cru PCLK_UART5>; - clock-names = "baudclk", "apb_pclk"; - dmas = <&dmac 15>, <&dmac 14>; - dma-names = "tx", "rx"; - pinctrl-names = "default"; - pinctrl-0 = <&uart5m0_xfer>; - reg-shift = <2>; - reg-io-width = <4>; - status = "disabled"; - }; - - saradc: adc@ff5e0000 { - compatible = "rockchip,rv1126-saradc", "rockchip,rk3399-saradc"; - reg = <0xff5e0000 0x100>; - interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; - #io-channel-cells = <1>; - clocks = <&cru CLK_SARADC>, <&cru PCLK_SARADC>; - clock-names = "saradc", "apb_pclk"; - resets = <&cru SRST_SARADC_P>; - reset-names = "saradc-apb"; - status = "disabled"; - }; - - timer0: timer@ff660000 { - compatible = "rockchip,rv1126-timer", "rockchip,rk3288-timer"; - reg = <0xff660000 0x20>; - interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru PCLK_TIMER>, <&cru CLK_TIMER0>; - clock-names = "pclk", "timer"; - }; - - vop: vop@ffb00000 { - compatible = "rockchip,rv1126-vop"; - reg = <0xffb00000 0x200>, <0xffb00a00 0x400>; - interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "aclk_vop", "dclk_vop", "hclk_vop"; - clocks = <&cru ACLK_VOP>, <&cru DCLK_VOP>, <&cru HCLK_VOP>; - reset-names = "axi", "ahb", "dclk"; - resets = <&cru SRST_VOP_A>, <&cru SRST_VOP_H>, <&cru SRST_VOP_D>; - iommus = <&vop_mmu>; - power-domains = <&power RV1126_PD_VO>; - status = "disabled"; - - vop_out: port { - #address-cells = <1>; - #size-cells = <0>; - - vop_out_rgb: endpoint@0 { - reg = <0>; - }; - - vop_out_dsi: endpoint@1 { - reg = <1>; - }; - }; - }; - - vop_mmu: iommu@ffb00f00 { - compatible = "rockchip,iommu"; - reg = <0xffb00f00 0x100>; - interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "aclk", "iface"; - clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>; - #iommu-cells = <0>; - power-domains = <&power RV1126_PD_VO>; - status = "disabled"; - }; - - gmac: ethernet@ffc40000 { - compatible = "rockchip,rv1126-gmac", "snps,dwmac-4.20a"; - reg = <0xffc40000 0x4000>; - interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "macirq", "eth_wake_irq"; - rockchip,grf = <&grf>; - clocks = <&cru CLK_GMAC_SRC>, <&cru CLK_GMAC_TX_RX>, - <&cru CLK_GMAC_TX_RX>, <&cru CLK_GMAC_REF>, - <&cru ACLK_GMAC>, <&cru PCLK_GMAC>, - <&cru CLK_GMAC_TX_RX>, <&cru CLK_GMAC_PTPREF>; - clock-names = "stmmaceth", "mac_clk_rx", - "mac_clk_tx", "clk_mac_ref", - "aclk_mac", "pclk_mac", - "clk_mac_speed", "ptp_ref"; - resets = <&cru SRST_GMAC_A>; - reset-names = "stmmaceth"; - - snps,mixed-burst; - snps,tso; - - snps,axi-config = <&stmmac_axi_setup>; - snps,mtl-rx-config = <&mtl_rx_setup>; - snps,mtl-tx-config = <&mtl_tx_setup>; - status = "disabled"; - - mdio: mdio { - compatible = "snps,dwmac-mdio"; - #address-cells = <0x1>; - #size-cells = <0x0>; - }; - - stmmac_axi_setup: stmmac-axi-config { - snps,wr_osr_lmt = <4>; - snps,rd_osr_lmt = <8>; - snps,blen = <0 0 0 0 16 8 4>; - }; - - mtl_rx_setup: rx-queues-config { - snps,rx-queues-to-use = <1>; - queue0 {}; - }; - - mtl_tx_setup: tx-queues-config { - snps,tx-queues-to-use = <1>; - queue0 {}; - }; - }; - - emmc: mmc@ffc50000 { - compatible = "rockchip,rv1126-dw-mshc", "rockchip,rk3288-dw-mshc"; - reg = <0xffc50000 0x4000>; - interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru HCLK_EMMC>, <&cru CLK_EMMC>, - <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>; - clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; - fifo-depth = <0x100>; - max-frequency = <200000000>; - power-domains = <&power RV1126_PD_NVM>; - status = "disabled"; - }; - - sdmmc: mmc@ffc60000 { - compatible = "rockchip,rv1126-dw-mshc", "rockchip,rk3288-dw-mshc"; - reg = <0xffc60000 0x4000>; - interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru HCLK_SDMMC>, <&cru CLK_SDMMC>, - <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>; - clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; - fifo-depth = <0x100>; - max-frequency = <200000000>; - status = "disabled"; - }; - - sdio: mmc@ffc70000 { - compatible = "rockchip,rv1126-dw-mshc", "rockchip,rk3288-dw-mshc"; - reg = <0xffc70000 0x4000>; - interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru HCLK_SDIO>, <&cru CLK_SDIO>, - <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>; - clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; - fifo-depth = <0x100>; - max-frequency = <200000000>; - power-domains = <&power RV1126_PD_SDIO>; - status = "disabled"; - }; - - sfc: spi@ffc90000 { - compatible = "rockchip,sfc"; - reg = <0xffc90000 0x4000>; - interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; - assigned-clocks = <&cru SCLK_SFC>; - assigned-clock-rates = <80000000>; - clock-names = "clk_sfc", "hclk_sfc"; - clocks = <&cru SCLK_SFC>, <&cru HCLK_SFC>; - power-domains = <&power RV1126_PD_NVM>; - status = "disabled"; - }; - - pinctrl: pinctrl { - compatible = "rockchip,rv1126-pinctrl"; - rockchip,grf = <&grf>; - rockchip,pmu = <&pmugrf>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - gpio0: gpio@ff460000 { - compatible = "rockchip,gpio-bank"; - reg = <0xff460000 0x100>; - interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&pmucru PCLK_GPIO0>, <&pmucru DBCLK_GPIO0>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio1: gpio@ff620000 { - compatible = "rockchip,gpio-bank"; - reg = <0xff620000 0x100>; - interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru PCLK_GPIO1>, <&cru DBCLK_GPIO1>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio2: gpio@ff630000 { - compatible = "rockchip,gpio-bank"; - reg = <0xff630000 0x100>; - interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru PCLK_GPIO2>, <&cru DBCLK_GPIO2>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio3: gpio@ff640000 { - compatible = "rockchip,gpio-bank"; - reg = <0xff640000 0x100>; - interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru PCLK_GPIO3>, <&cru DBCLK_GPIO3>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio4: gpio@ff650000 { - compatible = "rockchip,gpio-bank"; - reg = <0xff650000 0x100>; - interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru PCLK_GPIO4>, <&cru DBCLK_GPIO4>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - }; -}; - -#include "rv1126-pinctrl.dtsi" diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig index ec3697f358..661e7fd1c9 100644 --- a/arch/arm/mach-rockchip/Kconfig +++ b/arch/arm/mach-rockchip/Kconfig @@ -427,6 +427,7 @@ config ROCKCHIP_RV1126 imply SPL_ROCKCHIP_COMMON_BOARD imply SPL_SERIAL imply SPL_SYSCON + imply OF_UPSTREAM config ROCKCHIP_USB_UART bool "Route uart output to usb pins" diff --git a/configs/neu2-io-rv1126_defconfig b/configs/neu2-io-rv1126_defconfig index dc27b9e6fe..2a4c9b45a0 100644 --- a/configs/neu2-io-rv1126_defconfig +++ b/configs/neu2-io-rv1126_defconfig @@ -5,7 +5,7 @@ CONFIG_COUNTER_FREQUENCY=24000000 CONFIG_SYS_ARCH_TIMER=y CONFIG_ARCH_ROCKCHIP=y CONFIG_NR_DRAM_BANKS=1 -CONFIG_DEFAULT_DEVICE_TREE="rv1126-edgeble-neu2-io" +CONFIG_DEFAULT_DEVICE_TREE="rockchip/rv1126-edgeble-neu2-io" CONFIG_SYS_MONITOR_LEN=614400 CONFIG_ROCKCHIP_RV1126=y CONFIG_TARGET_RV1126_NEU2=y diff --git a/configs/sonoff-ihost-rv1126_defconfig b/configs/sonoff-ihost-rv1126_defconfig index dfc71b1397..4890644c7e 100644 --- a/configs/sonoff-ihost-rv1126_defconfig +++ b/configs/sonoff-ihost-rv1126_defconfig @@ -5,7 +5,7 @@ CONFIG_COUNTER_FREQUENCY=24000000 CONFIG_SYS_ARCH_TIMER=y CONFIG_ARCH_ROCKCHIP=y CONFIG_NR_DRAM_BANKS=2 -CONFIG_DEFAULT_DEVICE_TREE="rv1126-sonoff-ihost" +CONFIG_DEFAULT_DEVICE_TREE="rockchip/rv1126-sonoff-ihost" CONFIG_SYS_MONITOR_LEN=614400 CONFIG_ROCKCHIP_RV1126=y CONFIG_TARGET_RV1126_SONOFF_IHOST=y -- 2.44.0

2 3