December 2024 - U-Boot

[PATCH 0/6] ufs: core: initial cleanup and defines sync with Linux v6.12
by Neil Armstrong 06 Dec '24

06 Dec '24

This serie fixes the build and checkpatch warnings, and does a split of the ufs.h into a separate ufshci.h which helps syndhronizing the defines from Linux v6.12. No functional changes intended, tests on hardware are welcome. Signed-off-by: Neil Armstrong <neil.armstrong(a)linaro.org> --- Neil Armstrong (6): ufs: core: include missing include/ufs.h ufs: core: mark unexported functions as static ufs: core: cosmetic fixups ufs: core: move ufshci defines in a separate header ufs: core: sync unipro.h with Linux v6.12 ufs: core: sync ufshci.h with Linux v6.12 drivers/ufs/ufs.c | 43 +++-- drivers/ufs/ufs.h | 335 +----------------------------------- drivers/ufs/ufshci.h | 469 +++++++++++++++++++++++++++++++++++++++++++++++++++ drivers/ufs/unipro.h | 128 ++++++++------ 4 files changed, 571 insertions(+), 404 deletions(-) --- base-commit: dc1859f8d2ac3faaa5e2e1d465ec4bd8980520a5 change-id: 20241120-topic-ufs-cleanup-23671e3fc9e9 Best regards, -- Neil Armstrong <neil.armstrong(a)linaro.org>

3 17

Re: [PATCH] mtd: spi-nor: Fix the qspi parallel memory issues
by Dominik Wernberger 06 Dec '24

06 Dec '24

Hello Venkatesh, Is there any news on the status of this patch? I'm working with a Zynq 7z020 system where 2 Flashes operate in parallel QSPI mode. This patch is essential for the correct Flash erase in U-Boot v2025.01-rc3. Without this patch Flash erase fails on every second multiple of Flash erase section size (FESS). Failing means that the Flash erase is not initiated or successful. I.e., the Flash section is not altered. For example, lets assume a FESS with 0x20000 (128 kiB). sf test 00000 20000 # Works sf test 20000 20000 # Fails sf test 40000 20000 # Works sf test 60000 20000 # Fails # ... Note that executing sf erase 20000 20000 SF: 131072 bytes @ 0x20000 Erased: OK shows OK even though the Flash sector were not erased. In case you have any new/rebased patches you want me to test, I would be happy to do so. I'm looking forward getting this patch into mainline U-Boot. Best Regards, Dominik Content provided within this e-mail including any attachments, is for the use of the intended recipients and may contain Rohde & Schwarz company restricted information. Any unauthorized use, disclosure, or distribution of this communication in whole or in part is strictly prohibited. If you are not the intended recipient, please notify the sender by reply email or by telephone and delete the communication in its entirety.

2 5

[PATCH v7 00/12] Support OF_UPSTREAM for StarFive JH7110
by Hal Feng 06 Dec '24

06 Dec '24

This patchset add OF_UPSTREAM support for StarFive JH7110 based boards. All the JH7110 based boards can use the DT from upstreaming linux kernel. The v1.3b board device tree is set as the default device tree. Support CONFIG_MULTI_DTB_FIT and the SPL selects the correct U-Boot dtb using the EEPROM information. Note: 1. Mars CM (lite) are missing upstream dts and so are detected but not supported in this series. Users of Mars CM and Mars CM Lite may stay with U-Boot v2024.10 until this is resolved. 2. Property values of network phy0/1 for all JH7110 based boards now follow the upstream dts. Changes since v6: - Drop the "snps,dw-mshc" override of compatible in patch 2, then add "starfive,jh7110-mmc" compatible in mmc driver to match upstream DT. - Delete newline at end of Mars DT file in patch 5. - Sort OF_LIST in patch 7. - Sort items of images and configurations in patch 8. Changes since v5: - In patch 2, drop the override of rx-internal-delay-ps on phy0 and phy1. - In patch 5, drop "/delete-property/ motorcomm,tx-clk-10-inverted;" for Mars network phy0. - In patch 8, rename fdt and conf based on the compatible identifier of boards. Changes since v4: - Merge patch 2, 3, 5 into patch 1, ensuring git bisect works. - Add a new patch to sort the list of JH7110 imply statements. - Drop the reparent of clock JH7110_AONCLK_APB_FUNC in patch 4, which is unnecessary and will cause errors in gmac0 initialization. Changes since v3: - Add detection for Milk-V Mars CM (lite) boards in patch 13. Changes since v2: - Drop patch 1, because the riscv of_upstream Makefile is created by Conor in commit 239e4705099c. - Drop phy0 rx delay for milkv u-boot dtsi in patch 9. - Add a Fixes tag for patch 13. - In patch 14, the PCB version is only obtained when the product_id is VF7110. Improve the commit messages. Changes since v1: - Drop patch 12. - Modify patch 11 and add three new patches to support CONFIG_MULTI_DTB_FIT. The SPL selects the correct U-Boot dtb using the EEPROM information. History: v6: https://lore.kernel.org/all/20241125003205.75327-1-hal.feng@starfivetech.co… v5: https://lore.kernel.org/all/20241119020425.51989-1-hal.feng@starfivetech.co… v4: https://lore.kernel.org/all/20241111020808.38974-1-hal.feng@starfivetech.co… v3: https://lore.kernel.org/all/20241105034328.56439-1-hal.feng@starfivetech.co… v2: https://lore.kernel.org/all/20241028015847.42344-1-hal.feng@starfivetech.co… v1: https://lore.kernel.org/all/20240930155919.111738-1-hal.feng@starfivetech.c… Hal Feng (12): dts: starfive: Switch to using upstream DT riscv: dts: jh7110: Make u-boot device trees adapting to upstream DT mmc: dw_mmc: Add "starfive,jh7110-mmc" compatible to match upstream DT pcie: starfive: Make the driver compatible with upstream DT riscv: dts: jh7110: Move common code to the new jh7110-common-u-boot.dtsi riscv: dts: jh7110: Add u-boot device tree for JH7110 based boards board: starfive: spl: Drop the unneeded DT modification code configs: visionfive2: Enable MULTI_DTB_FIT for JH7110 based board DT riscv: dts: jh7110: Support multiple DTBs in a Fit image board: starfive: spl: Fix the wrong use of CONFIG_IS_ENABLED() board: starfive: spl: Support multiple DTBs for JH7110 based boards riscv: cpu: jh7110: Sort the list of imply statements arch/riscv/cpu/jh7110/Kconfig | 19 +- arch/riscv/dts/Makefile | 1 - arch/riscv/dts/jh7110-common-u-boot.dtsi | 196 +++++ arch/riscv/dts/jh7110-milkv-mars-u-boot.dtsi | 6 + .../dts/jh7110-pine64-star64-u-boot.dtsi | 6 + .../jh7110-starfive-visionfive-2-u-boot.dtsi | 117 --- ...10-starfive-visionfive-2-v1.2a-u-boot.dtsi | 6 + ...10-starfive-visionfive-2-v1.3b-u-boot.dtsi | 6 + .../dts/jh7110-starfive-visionfive-2.dts | 11 - .../dts/jh7110-starfive-visionfive-2.dtsi | 380 --------- arch/riscv/dts/jh7110-u-boot.dtsi | 36 +- arch/riscv/dts/jh7110.dtsi | 761 ------------------ board/starfive/visionfive2/spl.c | 391 +-------- configs/starfive_visionfive2_defconfig | 4 +- drivers/clk/starfive/clk-jh7110-pll.c | 6 +- drivers/clk/starfive/clk-jh7110.c | 44 +- drivers/mmc/snps_dw_mmc.c | 1 + drivers/pci/pcie_starfive_jh7110.c | 59 +- .../dt-bindings/clock/starfive,jh7110-crg.h | 258 ------ .../dt-bindings/reset/starfive,jh7110-crg.h | 183 ----- 20 files changed, 356 insertions(+), 2135 deletions(-) create mode 100644 arch/riscv/dts/jh7110-common-u-boot.dtsi create mode 100644 arch/riscv/dts/jh7110-milkv-mars-u-boot.dtsi create mode 100644 arch/riscv/dts/jh7110-pine64-star64-u-boot.dtsi delete mode 100644 arch/riscv/dts/jh7110-starfive-visionfive-2-u-boot.dtsi create mode 100644 arch/riscv/dts/jh7110-starfive-visionfive-2-v1.2a-u-boot.dtsi create mode 100644 arch/riscv/dts/jh7110-starfive-visionfive-2-v1.3b-u-boot.dtsi delete mode 100644 arch/riscv/dts/jh7110-starfive-visionfive-2.dts delete mode 100644 arch/riscv/dts/jh7110-starfive-visionfive-2.dtsi delete mode 100644 arch/riscv/dts/jh7110.dtsi delete mode 100644 include/dt-bindings/clock/starfive,jh7110-crg.h delete mode 100644 include/dt-bindings/reset/starfive,jh7110-crg.h base-commit: acab6e78aca767ef71470871842e5c090e3672c7 -- 2.43.2

3 19

Mismatch between wget online help and accepted syntax
by Heinrich Schuchardt 06 Dec '24

06 Dec '24

Hello Jerome, origin/next qemu-riscv64_smode_defconfig with HTTPS enabled showed me: => wget 192.168.103.3:/hweb/arm64/helloworld.efi invalid uri, no file path Invalid URL. Use http(s):// => help wget wget - boot image via network using HTTP/HTTPS protocol Usage: wget [loadAddress] url wget [loadAddress] [host:]path Here the longtext help is not consistent with the implementation. Best regards Heinrich

2 1

[PATCH v7 01/14] net: wget: let wget_with_dns work with dns disabled
by Adriano Cordova 05 Dec '24

05 Dec '24

This was marked as TODO in the code: - Enable use of wget_with_dns even if CMD_DNS is disabled if the given uri has the ip address for the http server. - Move the check for CMD_DNS inside wget_with_dns. - Rename wget_with_dns to wget_do_request Signed-off-by: Adriano Cordova <adrianox(a)gmail.com> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt(a)canonical.com> Reviewed-by: Jerome Forissier <jerome.forissier(a)linaro.org> --- include/net-common.h | 7 +++++-- lib/efi_loader/efi_bootmgr.c | 2 +- net/lwip/wget.c | 4 ++-- net/net-common.c | 2 +- net/wget.c | 34 ++++++++++++++++++++-------------- 5 files changed, 29 insertions(+), 20 deletions(-) diff --git a/include/net-common.h b/include/net-common.h index c5e314b360..8fc1bac47f 100644 --- a/include/net-common.h +++ b/include/net-common.h @@ -501,13 +501,16 @@ int dhcp_run(ulong addr, const char *fname, bool autoload); int do_tftpb(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]); /** - * wget_with_dns() - runs dns host IP address resulution before wget + * wget_do_request() - sends a wget request + * + * Sends a wget request, if DNS resolution is enabled it resolves the + * given uri. * * @dst_addr: destination address to download the file * @uri: uri string of target file of wget * Return: zero on success, negative if failed */ -int wget_with_dns(ulong dst_addr, char *uri); +int wget_do_request(ulong dst_addr, char *uri); /** * wget_validate_uri() - varidate the uri * diff --git a/lib/efi_loader/efi_bootmgr.c b/lib/efi_loader/efi_bootmgr.c index 8c51a6ef2e..c6124c590d 100644 --- a/lib/efi_loader/efi_bootmgr.c +++ b/lib/efi_loader/efi_bootmgr.c @@ -479,7 +479,7 @@ static efi_status_t try_load_from_uri_path(struct efi_device_path_uri *uridp, } image_addr = hextoul(s, NULL); - err = wget_with_dns(image_addr, uridp->uri); + err = wget_do_request(image_addr, uridp->uri); if (err < 0) { ret = EFI_INVALID_PARAMETER; goto err; diff --git a/net/lwip/wget.c b/net/lwip/wget.c index 3d02f26c09..af87e1acd3 100644 --- a/net/lwip/wget.c +++ b/net/lwip/wget.c @@ -353,7 +353,7 @@ static int wget_loop(struct udevice *udev, ulong dst_addr, char *uri) return -1; } -int wget_with_dns(ulong dst_addr, char *uri) +int wget_do_request(ulong dst_addr, char *uri) { eth_set_current(); @@ -387,7 +387,7 @@ int do_wget(struct cmd_tbl *cmdtp, int flag, int argc, char * const argv[]) return CMD_RET_FAILURE; wget_info = &default_wget_info; - if (wget_with_dns(dst_addr, nurl)) + if (wget_do_request(dst_addr, nurl)) return CMD_RET_FAILURE; return CMD_RET_SUCCESS; diff --git a/net/net-common.c b/net/net-common.c index 45288fe5f8..e01b0da7d7 100644 --- a/net/net-common.c +++ b/net/net-common.c @@ -23,5 +23,5 @@ struct wget_http_info *wget_info; int wget_request(ulong dst_addr, char *uri, struct wget_http_info *info) { wget_info = info ? info : &default_wget_info; - return wget_with_dns(dst_addr, uri); + return wget_do_request(dst_addr, uri); } diff --git a/net/wget.c b/net/wget.c index 5d70b7a82e..f3b43b06b8 100644 --- a/net/wget.c +++ b/net/wget.c @@ -535,8 +535,7 @@ void wget_start(void) wget_send(TCP_SYN, 0, 0, 0); } -#if (IS_ENABLED(CONFIG_CMD_DNS)) -int wget_with_dns(ulong dst_addr, char *uri) +int wget_do_request(ulong dst_addr, char *uri) { int ret; char *s, *host_name, *file_name, *str_copy; @@ -555,24 +554,32 @@ int wget_with_dns(ulong dst_addr, char *uri) s = str_copy + strlen("http://"); host_name = strsep(&s, "/"); if (!s) { - log_err("Error: invalied uri, no file path\n"); ret = -EINVAL; goto out; } file_name = s; - /* TODO: If the given uri has ip address for the http server, skip dns */ - net_dns_resolve = host_name; - net_dns_env_var = "httpserverip"; - if (net_loop(DNS) < 0) { - log_err("Error: dns lookup of %s failed, check setup\n", net_dns_resolve); - ret = -EINVAL; - goto out; - } - s = env_get("httpserverip"); - if (!s) { + host_name = strsep(&host_name, ":"); + + if (string_to_ip(host_name).s_addr) { + s = host_name; + } else { +#if IS_ENABLED(CONFIG_CMD_DNS) + net_dns_resolve = host_name; + net_dns_env_var = "httpserverip"; + if (net_loop(DNS) < 0) { + ret = -EINVAL; + goto out; + } + s = env_get("httpserverip"); + if (!s) { + ret = -EINVAL; + goto out; + } +#else ret = -EINVAL; goto out; +#endif } strlcpy(net_boot_file_name, s, sizeof(net_boot_file_name)); @@ -586,7 +593,6 @@ out: return ret < 0 ? ret : 0; } -#endif /** * wget_validate_uri() - validate the uri for wget -- 2.43.0

4 18

[PATCH 0/8] Reverts and fixes for board failures
by Simon Glass 05 Dec '24

05 Dec '24

This series collects together a set of reverts and fixes to get most of the boards in the sjg lab running again. Unfortunately three of them have developed a failure which requires more diagnosis, as it may just be a hardware failure. For coral, the TPM tests fail, but the board is working, so this can be dealt with separately. One remaining issue is that I am not sure what happens if two people try to run tests at the same time. Tests run as the same user so I need to investigate how that is handled. Simon Glass (8): CI: Drop extra condition for sjg lab Revert "power: regulator: Trigger probe of regulators which are always-on or boot-on" Revert "fdt: Correct condition for bloblist existing" Revert "fdt: Allow the devicetree to come from a bloblist" fdt: Allow the devicetree to come from a bloblist binman: Avoid skipping binman_init() Revert "global_data: Drop spl_handoff" CI: Drop broken boards from sjg lab .gitlab-ci.yml | 41 +++++++++-------- arch/x86/cpu/intel_common/cpu_from_spl.c | 4 +- arch/x86/lib/fsp2/fsp_dram.c | 4 +- cmd/sb.c | 6 +-- common/bloblist.c | 1 + common/board_f.c | 12 +++++ common/init/handoff.c | 12 ----- doc/develop/devicetree/control.rst | 6 +-- drivers/clk/rockchip/clk_rk3399.c | 3 +- drivers/power/regulator/regulator-uclass.c | 22 +++------ dts/Kconfig | 8 ++++ include/asm-generic/global_data.h | 6 +++ include/fdtdec.h | 3 +- include/handoff.h | 7 --- lib/binman.c | 1 - lib/fdtdec.c | 53 ++++++++-------------- test/dm/regulator.c | 6 ++- 17 files changed, 91 insertions(+), 104 deletions(-) -- 2.43.0

6 44

[PATCH v2 1/3] pinctrl: rzg2l: Support 2.5V PVDD for Ethernet interfaces
by Paul Barker 05 Dec '24

05 Dec '24

The Ethenet interfaces on the Renesas RZ/G2L SoC family can operate at multiple power supply voltages: 3.3V (default value), 2.5V and 1.8V. rzg2l_pinconf_set() is extended to support the 2.5V setting, with a check to ensure this is only used on Ethernet interfaces as it is not supported on the SD & QSPI interfaces. While we're modifying rzg2l_pinconf_set(), drop the unnecessary default value for pwr_reg as it is set in every branch of the following if condition. Signed-off-by: Paul Barker <paul.barker.ct(a)bp.renesas.com> --- Changes v1->v2: - Split out of series adding RZ/G2L Ethernet support [1] [1]: https://lore.kernel.org/all/20241024152448.102-1-paul.barker.ct@bp.renesas.… drivers/pinctrl/renesas/rzg2l-pfc.c | 49 ++++++++++++++++++++--------- include/renesas/rzg2l-pfc.h | 2 ++ 2 files changed, 37 insertions(+), 14 deletions(-) diff --git a/drivers/pinctrl/renesas/rzg2l-pfc.c b/drivers/pinctrl/renesas/rzg2l-pfc.c index e88ec1c18373..0098e2d52d57 100644 --- a/drivers/pinctrl/renesas/rzg2l-pfc.c +++ b/drivers/pinctrl/renesas/rzg2l-pfc.c @@ -394,18 +394,10 @@ static int rzg2l_pinconf_set(struct udevice *dev, unsigned int pin_selector, } case PIN_CONFIG_POWER_SOURCE: { - u32 pwr_reg = 0x0; + bool support_2500 = false; + u32 pwr_reg; + u32 value; - /* argument is in mV */ - if (argument != 1800 && argument != 3300) { - dev_err(dev, "Invalid mV %u\n", argument); - return -EINVAL; - } - - /* - * TODO: PIN_CFG_IO_VMC_ETH0 & PIN_CFG_IO_VMC_ETH1 will be - * handled when the RZ/G2L Ethernet driver is added. - */ if (cfg & PIN_CFG_IO_VMC_SD0) { dev_dbg(dev, "port off %u:%u set SD_CH 0 PVDD=%u\n", port_offset, pin, argument); @@ -418,13 +410,42 @@ static int rzg2l_pinconf_set(struct udevice *dev, unsigned int pin_selector, dev_dbg(dev, "port off %u:%u set QSPI PVDD=%u\n", port_offset, pin, argument); pwr_reg = QSPI; + } else if (cfg & PIN_CFG_IO_VMC_ETH0) { + dev_dbg(dev, "port off %u:%u set ETH0 PVDD=%u\n", + port_offset, pin, argument); + pwr_reg = ETH_POC(0); + support_2500 = true; + } else if (cfg & PIN_CFG_IO_VMC_ETH1) { + dev_dbg(dev, "port off %u:%u set ETH1 PVDD=%u\n", + port_offset, pin, argument); + pwr_reg = ETH_POC(1); + support_2500 = true; } else { - dev_dbg(dev, "pin power source is not selectable\n"); + dev_dbg(dev, "port off %u:%u PVDD is not selectable\n", + port_offset, pin); + return -EINVAL; + } + + /* argument is in mV */ + switch (argument) { + case 1800: + value = PVDD_1800; + break; + case 3300: + value = PVDD_3300; + break; + case 2500: + if (support_2500) { + value = PVDD_2500; + break; + } + fallthrough; + default: + dev_err(dev, "Invalid mV %u\n", argument); return -EINVAL; } - writel((argument == 1800) ? PVDD_1800 : PVDD_3300, - data->base + pwr_reg); + writel(value, data->base + pwr_reg); break; } diff --git a/include/renesas/rzg2l-pfc.h b/include/renesas/rzg2l-pfc.h index 2df17ece2a31..d1015b1d2ac1 100644 --- a/include/renesas/rzg2l-pfc.h +++ b/include/renesas/rzg2l-pfc.h @@ -77,9 +77,11 @@ #define IEN(n) (0x1800 + (n) * 8) #define PWPR 0x3014 #define SD_CH(n) (0x3000 + (n) * 4) +#define ETH_POC(ch) (0x300c + (ch) * 4) #define QSPI 0x3008 #define PVDD_1800 1 /* I/O domain voltage <= 1.8V */ +#define PVDD_2500 2 /* I/O domain voltage 2.5V */ #define PVDD_3300 0 /* I/O domain voltage >= 3.3V */ #define PWPR_B0WI BIT(7) /* Bit Write Disable */ -- 2.43.0

2 5

[PATCH v2] net: ravb: Simplify max-speed handling in ravb_of_to_plat
by Paul Barker 05 Dec '24

05 Dec '24

We can call dev_read_u32_default() instead of calling fdt_getprop() then fdt32_to_cpu(). Signed-off-by: Paul Barker <paul.barker.ct(a)bp.renesas.com> Reviewed-by: Marek Vasut <marek.vasut+renesas(a)mailbox.org> --- Changes v1->v2: - Split out of series adding RZ/G2L Ethernet support [1] - Added Marek's Reviewed-by tag [1]: https://lore.kernel.org/all/20241024152448.102-1-paul.barker.ct@bp.renesas.… drivers/net/ravb.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/net/ravb.c b/drivers/net/ravb.c index f1401d2f6ed2..6393c3a7c3fe 100644 --- a/drivers/net/ravb.c +++ b/drivers/net/ravb.c @@ -657,10 +657,7 @@ int ravb_of_to_plat(struct udevice *dev) if (pdata->phy_interface == PHY_INTERFACE_MODE_NA) return -EINVAL; - pdata->max_speed = 1000; - cell = fdt_getprop(gd->fdt_blob, dev_of_offset(dev), "max-speed", NULL); - if (cell) - pdata->max_speed = fdt32_to_cpu(*cell); + pdata->max_speed = dev_read_u32_default(dev, "max-speed", 1000); sprintf(bb_miiphy_buses[0].name, dev->name); -- 2.43.0

2 3

[PATCH v2 00/41] pxe: Support read_all() for extlinux and PXE
by Simon Glass 05 Dec '24

05 Dec '24

This series implements read_all() so that it is possible to read all the files relating to a bootflow, make adjustments and then boot. Unfortunately quite a few things stand in the way, so this series finishes off several pending items: zboot without CONFIG_CMDLINE, required support in pxe_utils and the differing code in the extlinux and PXE bootmeths. There is very little new code, but quite a lot of refactoring. The bootm, booti and bootz commands have all been refactored previously, so that they can operate without needing CONFIG_CMDLINE to be enabled. At the, time, zboot was left alone, since it is x86-specific and a bit more trouble. This series adds a programatic API for zboot and uses the forthcoming bootstd 'image list' to collect information from an extlinux file. It is therefore possible to parse the file, load the resulting images and then examine/adjust the resulting bootflow, before booting. The addition of options to extlinux resulted in the PXE and extlinux bootmeth having slightly different features. This is tidied up in this series, with common functions for both. This allows the same features (loading images as a separate step) to be provided for PXE. Changes in v2: - Split out strlcpy() change into new patch - Move strlcpy() change into an earlier patch - Fix 'initaddr' typo' - Rebase on earlier change - Add new patch to simplify the code reading fdtcontroladdr and fdt_addr Simon Glass (41): x86: Make do_zboot_states() static x86: Rename zboot_run() to zboot_run_args() x86: Drop duplicate definition of zimage_dump() x86: Move x86 zboot state into struct bootm_info x86: Rename state to bmi x86: Move the bootm state for zimage into cmd/ bootstd: Correct display of kernel version x86: Drop the unnecessary base_ptr argument to zboot_dump() boot: Use strlcpy() in label_boot() boot: Split pxe label_boot() into two parts boot: Split pxe label_run_boot() into two parts boot: Pass just the FDT argument to label_process_fdt() bootm: Allow building bootm.c without CONFIG_SYS_BOOTM_LEN boot: pxe: Use bootm_...() functions where possible pxe_utils: Simplify default fdt in label_run_boot() boot: pxe: Refactor label_run_boot() to avoid cmdline net: Keep the bootstage functions together net: Tidy up the comments to parse_args() net: Simplify parse_args() net: Return the load address from parse_args() net: Return the address and size from parse_addr_size() net: Return the size from parse_args() net: Refactor part of netboot_common() into a function net: Drop #ifdef in parse_args() net: Provide a function to run network operations boot: Avoid using the cmdline in bootmeth_pxe and pxe cmd pxe: Drop the cmdline parameter pxe: Record the bootflow in the PXE context pxe: Allow skipping the boot test: Update bootm test to restore silent_console bootmeth_extlinux: Move extlinux_info into plat bootmeth_extlinux: Move pxe_context into plat bootmeth: Refactor to put options in a common file bootmeth_pxe: Implement the fallback option bootmeth_pxe: Drop the driver-private data bootmeth_extlinux: Move boot code into common file bootstd: Update extlinux and pxe to allow boot interruption pxe: Collect the FDT in the bootflow pxe: Deal with a missing FDT in the bootflow pxe_utils: Refactor to separate reading from booting bootmeth_extlinux: Refactor extlinux to split boot arch/x86/include/asm/zimage.h | 57 +--- arch/x86/lib/zimage.c | 102 ++++--- boot/Makefile | 6 +- boot/bootm.c | 8 +- boot/bootmeth_cros.c | 6 +- boot/bootmeth_extlinux.c | 97 +------ boot/bootmeth_pxe.c | 48 ++-- boot/ext_pxe_common.c | 134 +++++++++ boot/pxe_utils.c | 507 +++++++++++++++++++++------------- cmd/bootflow.c | 8 +- cmd/net.c | 92 +++--- cmd/pxe.c | 30 +- cmd/sysboot.c | 4 +- cmd/x86/zboot.c | 33 ++- include/bootm.h | 63 ++++- include/bootmeth.h | 8 +- include/extlinux.h | 52 +++- include/net-common.h | 30 ++ include/pxe_utils.h | 56 +++- net/net.c | 44 +++ test/boot/bootflow.c | 71 +++++ test/boot/bootm.c | 7 + 22 files changed, 957 insertions(+), 506 deletions(-) create mode 100644 boot/ext_pxe_common.c -- 2.34.1

2 45

[PATCH v3 0/2] doc: orthographic delights
by Lothar Rubusch 05 Dec '24

05 Dec '24

Fix some typos and wording in various files. As asked by Simon, several patches per file. The commits are extracted from my other patch set. Signed-off-by: Lothar Rubusch <l.rubusch(a)gmail.com> --- v2 -> v3: - htmldocs checked and fixed - remaining typos v1 -> v2: - dropped entries.rst, since it is generated - prefer British expressions - use term "devicetree" uniformly - fix several typos mentioned --- Lothar Rubusch (2): doc: develop: Fix typos and wording in binman/binman.rst doc: develop: Fix typos and wording in gdb.rst doc/develop/gdb.rst | 10 +- tools/binman/binman.rst | 234 ++++++++++++++++++++-------------------- 2 files changed, 122 insertions(+), 122 deletions(-) -- 2.39.2

3 4