December 2024 - U-Boot

[PULL] u-boot-sh/master
by Marek Vasut 09 Dec '24

09 Dec '24

The following changes since commit 45f05f681224d88d1b170063001b59edc8fc24cf: mbedtls: remove MBEDTLS_HAVE_TIME (2024-12-06 17:47:23 -0600) are available in the Git repository at: https://source.denx.de/u-boot/custodians/u-boot-sh.git master for you to fetch changes up to 455e66bc598935c01621e77709866eb54a6fbd5f: arm64: renesas: Disable AVB1 and AVB2 on R8A779G0 V4H White Hawk board (2024-12-08 23:07:34 +0100) ---------------------------------------------------------------- Marek Vasut (1): arm64: renesas: Disable AVB1 and AVB2 on R8A779G0 V4H White Hawk board Paul Barker (5): clk: rzg2l: Ignore enable for core clocks net: ravb: Simplify max-speed handling in ravb_of_to_plat pinctrl: rzg2l: Support 2.5V PVDD for Ethernet interfaces pinctrl: rzg2l: Support Ethernet TXC output enable pinctrl: rzg2l: Drop unnecessary scope arch/arm/dts/r8a779g0-white-hawk-u-boot.dtsi | 8 +++ drivers/clk/renesas/rzg2l-cpg.c | 8 +++ drivers/net/ravb.c | 6 +- drivers/pinctrl/renesas/rzg2l-pfc.c | 83 ++++++++++++++++++++++------ include/renesas/rzg2l-pfc.h | 4 ++ 5 files changed, 86 insertions(+), 23 deletions(-)

2 1

[PATCH 0/3] rpi: Tidy up booting
by Simon Glass 09 Dec '24

09 Dec '24

This series allows rpi to boot a compressed Ubuntu kernel with ~100MB ramdisk, by expanding the available space. It also tidies up some strange behaviour with the provided FDT, where a separate pointer is maintained to it, even though U-Boot has copied it and placed it in its own space. This avoids strange bugs where it accidentally gets overwritten when loading a file into memory. Simon Glass (3): rpi: Update environment to support booti and large initrd fdt: Allow expanding the devicetree during relocation rpi: Use the U-Boot control FDT for fdt_addr board/raspberrypi/rpi/rpi.c | 20 ++++++++------------ board/raspberrypi/rpi/rpi.env | 10 ++++++---- common/board_f.c | 6 ++++-- dts/Kconfig | 11 +++++++++++ 4 files changed, 29 insertions(+), 18 deletions(-) -- 2.34.1

2 21

[PATCH 0/3] cmd: ufetch improvements
by J. Neuschäfer via B4 Relay 09 Dec '24

09 Dec '24

Following the recent addition of the "ufetch" command, this patchset improves it in a few ways. Signed-off-by: J. Neuschäfer <j.ne(a)posteo.net> --- J. Neuschäfer (3): cmd: ufetch: Fix type mismatch on 32-bit cmd: Allow building ufetch without CONFIG_BLK cmd: ufetch: Show CPU architecture under "CPU" cmd/Kconfig | 1 - cmd/ufetch.c | 14 +++++++++----- 2 files changed, 9 insertions(+), 6 deletions(-) --- base-commit: e5c1c2c6d9da79d874015f6d33fa2c7a34899733 change-id: 20241203-ufetch-326e771b26ad Best regards, -- J. Neuschäfer <j.ne(a)posteo.net>

3 9

[PATCH v2 0/8] SMBIOS improvements
by Raymond Mao 09 Dec '24

09 Dec '24

Motivations for changes: Current SMBIOS library and command-line tool is not fully matching with the requirements: 1. Missing support for other mandatory types (#7, #9, #16, #17, #19). 2. Only a few platforms support SMBIOS node from the device tree. 3. Values of some fields are hardcoded in the library other than fetching from the device hardware. 4. Embedded data with dynamic length is not supported (E.g. Contained Object Handles in Type #2 and Contained Elements in Type #3) Changes: 1. Refactor the SMBIOS library and command-line tool to better align with the SMBIOS spec. 2. Create an arch-specific driver for all aarch64-based platforms to fetch SMBIOS private data from the device hardware (processor and cache). 3. Create a sysinfo driver to poppulate platform SMBIOS private data. 4. Add generic SMBIOS DTS file for arm64 platforms for those common strings and values which cannot be retrieved from the system registers. Vendors can create their own SMBIOS node using this as an example. For those boards without SMBIOS nodes, this DTS file can be included to have a generic SMBIOS information of the system. 5. Add support for Type #7 (Cache Information) and link its handles to Type #4. Once this patch is acceptted, subsequent patch sets will add other missing types (#9, #16, #17, #19). Tests: To test this with QEMU arm64, please follow the guide on dt_qemu.rst to get a merged DT to run with. ``` qemu-system-arm -machine virt -machine dumpdtb=qemu.dtb cat <(dtc -I dtb qemu.dtb) <(dtc -I dtb ./dts/dt.dtb | grep -v /dts-v1/) \ | dtc - -o merged.dtb qemu-system-arm -machine virt -nographic -bios u-boot.bin -dtb merged.dtb ``` Known issues: It hits the image size limitation on R-CAR board(rcar3_salvator-x). ``` u-boot.img exceeds file size limit: limit: 0x100000 bytes actual: 0x10049d bytes excess: 0x49d bytes ``` This board needs a clean-up to reserve spaces for the changes as SMBIOS is a fundamental feature. Below is the breakdown of the size-growth of the related functions: function old new delta static.smbios_write_type4 252 1052 +800 static.smbios_write_type7 - 764 +764 static.smbios_write_type3 188 488 +300 smbios_get_val_si - 128 +128 static.smbios_write_type2 316 376 +60 sysinfo_get_data - 56 +56 static.smbios_write_type1 380 396 +16 smbios_write_funcs 112 128 +16 ofnode_read_u32 - 12 +12 sysinfo_rcar_ops 40 48 +8 install_smbios_table 468 472 +4 Raymond Mao (8): smbios: Refactor the smbios headfile sysinfo: Add sysinfo API for accessing data area sysinfo: Add sysinfo driver and data structure for smbios smbios: Refactor smbios library armv8: Add arch-specific sysinfo platform driver armv8: Add generic smbios information into the device tree cmd: update smbios cmd configs: Enable sysinfo for QEMU Arm64 arch/arm/cpu/armv8/Makefile | 2 + arch/arm/cpu/armv8/sysinfo.c | 292 +++++++++++++++++++ arch/arm/dts/qemu-arm64.dts | 4 + arch/arm/dts/smbios_generic.dtsi | 82 ++++++ cmd/smbios.c | 346 ++++++++++++++++++++--- configs/qemu_arm64_defconfig | 2 + drivers/misc/Kconfig | 2 +- drivers/sysinfo/smbios.c | 228 +++++++++++++++ drivers/sysinfo/sysinfo-uclass.c | 20 ++ include/smbios.h | 158 ++++++----- include/smbios_def.h | 191 +++++++++++++ include/smbios_plat.h | 79 ++++++ include/sysinfo.h | 125 ++++++++- lib/smbios.c | 462 ++++++++++++++++++++++++++----- test/py/tests/test_smbios.py | 2 +- 15 files changed, 1822 insertions(+), 173 deletions(-) create mode 100644 arch/arm/cpu/armv8/sysinfo.c create mode 100644 arch/arm/dts/smbios_generic.dtsi create mode 100644 include/smbios_def.h create mode 100644 include/smbios_plat.h -- 2.25.1

4 35

[PATCH] trace: add support for "trace clear"
by Jerome Forissier 09 Dec '24

09 Dec '24

Implement a "trace clear" command to delete the currently accumulated trace data. This comes handy when someone needs to trace a particular command. For example: => trace clear; dhcp; trace pause => trace stats => trace calls 0x02100000 0x10000000 => tftpput $profbase $profoffset 192.168.0.16:trace.bin Signed-off-by: Jerome Forissier <jerome.forissier(a)linaro.org> --- cmd/trace.c | 13 ++++++++++++- include/trace.h | 2 ++ lib/trace.c | 47 +++++++++++++++++++++++++++++++++-------------- 3 files changed, 47 insertions(+), 15 deletions(-) diff --git a/cmd/trace.c b/cmd/trace.c index 937e6a682ad..e95ac7ca9da 100644 --- a/cmd/trace.c +++ b/cmd/trace.c @@ -87,8 +87,18 @@ int do_trace(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) trace_set_enabled(0); break; case 'c': - if (create_call_list(argc, argv)) + switch (*(cmd + 1)) { + case 'a': + if (create_call_list(argc, argv)) + return cmd_usage(cmdtp); + break; + case 'l': + if (trace_clear()) + return CMD_RET_FAILURE; + break; + default: return cmd_usage(cmdtp); + } break; case 'r': trace_set_enabled(1); @@ -113,6 +123,7 @@ U_BOOT_CMD( "stats - display tracing statistics\n" "trace pause - pause tracing\n" "trace resume - resume tracing\n" + "trace clear - clear traces\n" "trace funclist [<addr> <size>] - dump function list into buffer\n" "trace calls [<addr> <size>] " "- dump function call trace into buffer" diff --git a/include/trace.h b/include/trace.h index 763d6d1255a..782eaae2fc2 100644 --- a/include/trace.h +++ b/include/trace.h @@ -100,6 +100,8 @@ void trace_set_enabled(int enabled); int trace_early_init(void); +int trace_clear(void); + /** * Init the trace system * diff --git a/lib/trace.c b/lib/trace.c index cabbe47b58a..def9f912c92 100644 --- a/lib/trace.c +++ b/lib/trace.c @@ -351,14 +351,8 @@ static int get_func_count(void) return gd->mon_len / FUNC_SITE_SIZE; } -/** - * trace_init() - initialize the tracing system and enable it - * - * @buff: Pointer to trace buffer - * @buff_size: Size of trace buffer - * Return: 0 if ok - */ -int notrace trace_init(void *buff, size_t buff_size) +static int notrace trace_init_(void *buff, size_t buff_size, bool copy_early, + bool enable) { int func_count = get_func_count(); size_t needed; @@ -368,7 +362,7 @@ int notrace trace_init(void *buff, size_t buff_size) return func_count; trace_save_gd(); - if (!was_disabled) { + if (copy_early) { #ifdef CONFIG_TRACE_EARLY ulong used, count; char *end; @@ -394,9 +388,6 @@ int notrace trace_init(void *buff, size_t buff_size) } puts("\n"); memcpy(buff, hdr, used); -#else - puts("trace: already enabled\n"); - return -EALREADY; #endif } hdr = (struct trace_hdr *)buff; @@ -419,13 +410,41 @@ int notrace trace_init(void *buff, size_t buff_size) hdr->ftrace_size = (buff_size - needed) / sizeof(*hdr->ftrace); hdr->depth_limit = CONFIG_TRACE_CALL_DEPTH_LIMIT; - puts("trace: enabled\n"); - trace_enabled = 1; + printf("trace: initialized, %senabled\n", enable ? "" : "not "); + trace_enabled = enable; trace_inited = 1; return 0; } +/** + * trace_init() - initialize the tracing system and enable it + * + * @buff: Pointer to trace buffer + * @buff_size: Size of trace buffer + * Return: 0 if ok + */ +int notrace trace_init(void *buff, size_t buff_size) +{ + /* If traces are enabled already, we may have early traces to copy */ + return trace_init_(buff, buff_size, trace_enabled, true); +} + +/** + * trace_clear() - clear accumulated traced data + * + * May be called with tracing enabled or disabled. + */ +int notrace trace_clear(void) +{ + bool was_enabled = trace_enabled; + + if (trace_enabled) + trace_enabled = 0; + return trace_init_(gd->trace_buff, CONFIG_TRACE_BUFFER_SIZE, + false, was_enabled); +} + #ifdef CONFIG_TRACE_EARLY /** * trace_early_init() - initialize the tracing system for early tracing -- 2.43.0

2 2

[RFC PATCH] zynqmp: Add binman description for SOM
by Michal Simek 09 Dec '24

09 Dec '24

There is necessary to do some steps to compose boot images. These steps were in scripts in layers for a while. That's why introduce description via binman to simplify wiring and remove all scripting around. This should make sure that everybody is up2date with the latest versions. The first step is to create fit image with DTBs with descriptions in configuration node which is written as regular expression to match all SOM versions. Description is there for k24 and k26 in spite of low level psu_init configuration is different. The reason is that it goes to u-boot.itb image which is the same for k24 and k26. u-boot.itb is another image which is generated. It is normally generated via arch/arm/mach-zynqmp/mkimage_fit_atf.sh but this script is supposed to be deprecated. FIT image by purpose is using 64bit addresses to have default option to move images to high DDR (above 4GB). TF-A and TEE are optional components but in the most cases TF-A is present all the time and TEE(OP-TEE) is used by some configurations too. 3rd generated image is boot.bin with updated user field which contains version number. This image can be used with updated Image Selector which supports A/B update mechanisms with rollback protection. 4th image is image.bin which binary file which contains boot.bin and u-boot.itb together and can be programmed via origin Image Selector. This image can be also used for creating one capsule which contains both boot images (in SPL boot flow). Signed-off-by: Michal Simek <michal.simek(a)amd.com> --- Currently I have this for testing purpose only to find missing bits and pieces in binman for cases I want to support. This patch depends on https://lore.kernel.org/r/fbed0251437b61a2f7a85596d7403b5b9c8237c1.17283063… --- arch/arm/dts/Makefile | 1 + arch/arm/dts/zynqmp-som-binman.dts | 224 +++++++++++++++++++++++++++ arch/arm/mach-zynqmp/Kconfig | 17 ++ configs/xilinx_zynqmp_kria_defconfig | 2 + 4 files changed, 244 insertions(+) create mode 100644 arch/arm/dts/zynqmp-som-binman.dts diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 65176c8fb836..df340cc30701 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -367,6 +367,7 @@ dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-sm-k24-revA-sck-kv-g-revB.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-smk-k24-revA-sck-kv-g-revB.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-sm-k24-revA-sck-kr-g-revB.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-smk-k24-revA-sck-kr-g-revB.dtb +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-som-binman.dtb dtb-$(CONFIG_ARCH_VERSAL) += \ versal-mini.dtb \ diff --git a/arch/arm/dts/zynqmp-som-binman.dts b/arch/arm/dts/zynqmp-som-binman.dts new file mode 100644 index 000000000000..7f9333b02023 --- /dev/null +++ b/arch/arm/dts/zynqmp-som-binman.dts @@ -0,0 +1,224 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * dts file for Xilinx ZynqMP SOMs (k24/k26) + * + * (C) Copyright 2024, Advanced Micro Devices, Inc. + * + * Michal Simek <michal.simek(a)amd.com> + */ + +#include <config.h> + +/dts-v1/; +/ { + binman: binman { + multiple-images; + fit-dtb.blob { + filename = "fit-dtb.blob"; + pad-byte = <0>; + fit { + fit,align = <0x8>; + fit,external-offset = <0x0>; + description = "DTBs for SOMs+CCs"; + fit,fdt-list-val = "zynqmp-smk-k26-revA", "zynqmp-smk-k26-revA-sck-kr-g-revA", "zynqmp-smk-k26-revA-sck-kr-g-revB", "zynqmp-smk-k26-revA-sck-kv-g-revA", "zynqmp-smk-k26-revA-sck-kv-g-revB", "zynqmp-sm-k26-revA-sck-kv-g-revA", "zynqmp-sm-k26-revA-sck-kv-g-revB", "zynqmp-sm-k26-revA-sck-kr-g-revB", "zynqmp-smk-k24-revA-sck-kd-g-revA", "zynqmp-smk-k24-revA-sck-kv-g-revB", "zynqmp-smk-k24-revA-sck-kr-g-revB", "zynqmp-sm-k24-revA-sck-kd-g-revA", "zynqmp-sm-k24-revA-sck-kv-g-revB", "zynqmp-sm-k24-revA-sck-kr-g-revB"; + + images { + @fdt-SEQ { + description = "NAME"; + type = "flat_dt"; + arch = "arm64"; + compression = "none"; + hash-1 { + algo = "md5"; + }; + }; + }; + configurations { + default = "config-1"; + config-1 { + description = "SOM itself"; + fdt = "fdt-1"; + }; + config-2 { + description = "zynqmp-smk-k26-.*-sck-kr-g-revA"; + fdt = "fdt-2"; + }; + config-3 { + description = "zynqmp-smk-k26-.*-sck-kr-g-.*"; + fdt = "fdt-3"; + }; + config-4 { + description = "zynqmp-smk-k26-.*-sck-kv-g-rev[AZ]"; + fdt = "fdt-4"; + }; + config-5 { + description = "zynqmp-smk-k26-.*-sck-kv-g-.*"; + fdt = "fdt-5"; + }; + config-6 { + description = "zynqmp-sm-k26-.*-sck-kv-g-rev[AZ]"; + fdt = "fdt-6"; + }; + config-7 { + description = "zynqmp-sm-k26-.*-sck-kv-g-.*"; + fdt = "fdt-7"; + }; + config-8 { + description = "zynqmp-sm-k26-.*-sck-kr-g-.*"; + fdt = "fdt-8"; + }; + config-9 { + description = "zynqmp-smk-k24-.*-sck-kd-g-.*"; + fdt = "fdt-9"; + }; + config-10 { + description = "zynqmp-smk-k24-.*-sck-kv-g-.*"; + fdt = "fdt-10"; + }; + config-11 { + description = "zynqmp-smk-k24-.*-sck-kr-g-.*"; + fdt = "fdt-11"; + }; + config-12 { + description = "zynqmp-sm-k24-.*-sck-kd-g-.*"; + fdt = "fdt-12"; + }; + config-13 { + description = "zynqmp-sm-k24-.*-sck-kv-g-.*"; + fdt = "fdt-13"; + }; + config-14 { + description = "zynqmp-sm-k24-.*-sck-kr-g-.*"; + fdt = "fdt-14"; + }; + }; + }; + }; + + /* u-boot.itb generation in a static way */ +#define TEXT_BASE_DOWN (CONFIG_TEXT_BASE & 0xffffffff) +#define TEXT_BASE_UP ((CONFIG_TEXT_BASE >> 32) & 0xffffffff) + +#define BL31_BASE_DOWN (CONFIG_BL31_LOAD_ADDR & 0xffffffff) +#define BL31_BASE_UP ((CONFIG_BL31_LOAD_ADDR >> 32) & 0xffffffff) + +#define BL32_BASE_DOWN (CONFIG_BL32_LOAD_ADDR & 0xffffffff) +#define BL32_BASE_UP ((CONFIG_BL32_LOAD_ADDR >> 32) & 0xffffffff) + + itb { + filename = "u-boot.itb"; + pad-byte = <0>; + + fit { + description = "Configuration for Xilinx ZynqMP SoC"; + fit,align = <0x8>; + fit,external-offset = <0x0>; + images { + uboot { + description = "U-Boot (64-bit)"; + type = "firmware"; + os = "u-boot"; + arch = "arm64"; + compression = "none"; + load = <(TEXT_BASE_UP) (TEXT_BASE_DOWN)>; + entry = <(TEXT_BASE_UP) (TEXT_BASE_DOWN)>; + hash { + algo = "md5"; + }; + u-boot-nodtb { + }; + }; + atf { + description = "Trusted Firmware-A"; + type = "firmware"; + os = "arm-trusted-firmware"; + arch = "arm64"; + compression = "none"; + load = <(BL31_BASE_UP) (BL31_BASE_DOWN)>; + entry = <(BL31_BASE_UP) (BL31_BASE_DOWN)>; + hash { + algo = "md5"; + }; + atf-bl31 { + optional; + }; + }; + tee { + description = "OP-TEE"; + type = "tee"; + arch = "arm64"; + compression = "none"; + os = "tee"; + load = <(BL32_BASE_UP) (BL32_BASE_DOWN)>; + entry = <(BL32_BASE_UP) (BL32_BASE_DOWN)>; + tee-os { + optional; + }; + }; + fdt { + description = "Multi DTB fit image"; + type = "flat_dt"; + arch = "arm64"; + compression = "none"; + load = <0x0 0x100000>; + hash { + algo = "md5"; + }; + fdt-blob { + filename = "fit-dtb.blob"; + type = "blob-ext"; + }; + }; + }; + configurations { + default = "config-1"; + config-1 { + description = "Multi DTB with TF-A"; + firmware = "atf"; + loadables = "tee", "uboot", "fdt"; + }; + }; + }; + }; + + /* boot.bin generated with version string inside */ + bootimage { + filename = "boot.bin"; + pad-byte = <0>; + + blob-ext@1 { + offset = <0x0>; + filename = "spl/boot.bin"; + }; + /* Optional version string at offset 0x70 */ + blob-ext@2 { + offset = <0x70>; + filename = "version.bin"; + overlap; + optional; + }; + /* Optional version string at offset 0x94 */ + blob-ext@3 { + offset = <0x94>; + filename = "version.bin"; + overlap; + optional; + }; + }; + + /* Full QSPI image for recovery app */ + image { + filename = "image.bin"; + pad-byte = <0>; + + blob-ext@1 { + offset = <0x0>; + filename = "boot.bin"; + }; + blob-ext@2 { + offset = <CONFIG_SYS_SPI_U_BOOT_OFFS>; + filename = "u-boot.itb"; + }; + }; + }; +}; diff --git a/arch/arm/mach-zynqmp/Kconfig b/arch/arm/mach-zynqmp/Kconfig index aea13622b68a..a74de68c0181 100644 --- a/arch/arm/mach-zynqmp/Kconfig +++ b/arch/arm/mach-zynqmp/Kconfig @@ -11,6 +11,9 @@ config SYS_VENDOR config SYS_SOC default "zynqmp" +config BINMAN + default y + config SYS_MEM_RSVD_FOR_MMU bool "Reserve memory for MMU Table" help @@ -132,6 +135,20 @@ config SPL_ZYNQMP_RESTORE_JTAG even if no eFuses were burnt. This option restores the interface if possible. +config BL31_LOAD_ADDR + hex "Load address of BL31 image (mostly TF-A)" + default 0xfffe5000 + help + The load address for the BL31 image. This value is used to build the + FIT image header that places BL31 in memory where it will run. + +config BL32_LOAD_ADDR + hex "Load address of BL32 image (mostly secure OS)" + default 0x60000000 + help + The load address for the BL32 image. This value is used to build the + FIT image header that places BL32 in memory where it will run. + config ZYNQ_SDHCI_MAX_FREQ default 200000000 diff --git a/configs/xilinx_zynqmp_kria_defconfig b/configs/xilinx_zynqmp_kria_defconfig index 2eff9f35c0f4..1b4c33d2974e 100644 --- a/configs/xilinx_zynqmp_kria_defconfig +++ b/configs/xilinx_zynqmp_kria_defconfig @@ -53,6 +53,7 @@ CONFIG_SYS_PBSIZE=2073 CONFIG_BOARD_EARLY_INIT_R=y CONFIG_CLOCKS=y CONFIG_SPL_MAX_SIZE=0x40000 +# CONFIG_SPL_BINMAN_SYMBOLS is not set # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set CONFIG_SPL_FS_LOAD_KERNEL_NAME="" CONFIG_SPL_FS_LOAD_ARGS_NAME="" @@ -233,6 +234,7 @@ CONFIG_VIDEO_ZYNQMP_DPSUB=y CONFIG_VIRTIO_MMIO=y CONFIG_VIRTIO_NET=y CONFIG_VIRTIO_BLK=y +# CONFIG_BINMAN_FDT is not set CONFIG_PANIC_HANG=y CONFIG_TPM=y CONFIG_SPL_GZIP=y -- 2.43.0

3 8

[PATCH v1] rockchip: rk3288: use includes from dts/upstream
by Johan Jonker 09 Dec '24

09 Dec '24

The clock and power DT includes for rk3288 are now available in the dts/upstream directory, so remove the ones that are now redundant. Remove the use of non existent SCLK_MAC_PLL id in the clock driver. Signed-off-by: Johan Jonker <jbx6244(a)gmail.com> --- Changed: This patch does not include the removal of a clock binding as was proposed in an earlier serie elsewhere. For better fit with my other patch serie for binding removal. http://patchwork.ozlabs.org/project/uboot/patch/71b804a0-ae2a-472c-84c9-ad7… https://patchwork.ozlabs.org/project/uboot/patch/20241109210427.884888-4-jo… --- drivers/clk/rockchip/clk_rk3288.c | 8 +- include/dt-bindings/clock/rk3288-cru.h | 381 ----------------------- include/dt-bindings/power/rk3288-power.h | 32 -- 3 files changed, 4 insertions(+), 417 deletions(-) delete mode 100644 include/dt-bindings/clock/rk3288-cru.h delete mode 100644 include/dt-bindings/power/rk3288-power.h diff --git a/drivers/clk/rockchip/clk_rk3288.c b/drivers/clk/rockchip/clk_rk3288.c index 43c44fadbe7a..a4ff1c41abb8 100644 --- a/drivers/clk/rockchip/clk_rk3288.c +++ b/drivers/clk/rockchip/clk_rk3288.c @@ -903,11 +903,11 @@ static int __maybe_unused rk3288_gmac_set_parent(struct clk *clk, struct clk *pa int ret; /* - * If the requested parent is in the same clock-controller and - * the id is SCLK_MAC_PLL ("mac_pll_src"), switch to the internal - * clock. + * If the requested parent is in the same clock-controller the + * likely parent is the unexported SCLK_MAC_PLL ("mac_pll_src"), + * switch to the internal clock. */ - if ((parent->dev == clk->dev) && (parent->id == SCLK_MAC_PLL)) { + if (parent->dev == clk->dev) { debug("%s: switching GAMC to SCLK_MAC_PLL\n", __func__); rk_clrsetreg(&cru->cru_clksel_con[21], RMII_EXTCLK_MASK, 0); return 0; diff --git a/include/dt-bindings/clock/rk3288-cru.h b/include/dt-bindings/clock/rk3288-cru.h deleted file mode 100644 index 453f66718c6b..000000000000 --- a/include/dt-bindings/clock/rk3288-cru.h +++ /dev/null @@ -1,381 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * Copyright (c) 2014 MundoReader S.L. - * Author: Heiko Stuebner <heiko(a)sntech.de> - */ - -#ifndef _DT_BINDINGS_CLK_ROCKCHIP_RK3288_H -#define _DT_BINDINGS_CLK_ROCKCHIP_RK3288_H - -/* core clocks */ -#define PLL_APLL 1 -#define PLL_DPLL 2 -#define PLL_CPLL 3 -#define PLL_GPLL 4 -#define PLL_NPLL 5 -#define ARMCLK 6 - -/* sclk gates (special clocks) */ -#define SCLK_GPU 64 -#define SCLK_SPI0 65 -#define SCLK_SPI1 66 -#define SCLK_SPI2 67 -#define SCLK_SDMMC 68 -#define SCLK_SDIO0 69 -#define SCLK_SDIO1 70 -#define SCLK_EMMC 71 -#define SCLK_TSADC 72 -#define SCLK_SARADC 73 -#define SCLK_PS2C 74 -#define SCLK_NANDC0 75 -#define SCLK_NANDC1 76 -#define SCLK_UART0 77 -#define SCLK_UART1 78 -#define SCLK_UART2 79 -#define SCLK_UART3 80 -#define SCLK_UART4 81 -#define SCLK_I2S0 82 -#define SCLK_SPDIF 83 -#define SCLK_SPDIF8CH 84 -#define SCLK_TIMER0 85 -#define SCLK_TIMER1 86 -#define SCLK_TIMER2 87 -#define SCLK_TIMER3 88 -#define SCLK_TIMER4 89 -#define SCLK_TIMER5 90 -#define SCLK_TIMER6 91 -#define SCLK_HSADC 92 -#define SCLK_OTGPHY0 93 -#define SCLK_OTGPHY1 94 -#define SCLK_OTGPHY2 95 -#define SCLK_OTG_ADP 96 -#define SCLK_HSICPHY480M 97 -#define SCLK_HSICPHY12M 98 -#define SCLK_MACREF 99 -#define SCLK_LCDC_PWM0 100 -#define SCLK_LCDC_PWM1 101 -#define SCLK_MAC_RX 102 -#define SCLK_MAC_TX 103 -#define SCLK_EDP_24M 104 -#define SCLK_EDP 105 -#define SCLK_RGA 106 -#define SCLK_ISP 107 -#define SCLK_ISP_JPE 108 -#define SCLK_HDMI_HDCP 109 -#define SCLK_HDMI_CEC 110 -#define SCLK_HEVC_CABAC 111 -#define SCLK_HEVC_CORE 112 -#define SCLK_I2S0_OUT 113 -#define SCLK_SDMMC_DRV 114 -#define SCLK_SDIO0_DRV 115 -#define SCLK_SDIO1_DRV 116 -#define SCLK_EMMC_DRV 117 -#define SCLK_SDMMC_SAMPLE 118 -#define SCLK_SDIO0_SAMPLE 119 -#define SCLK_SDIO1_SAMPLE 120 -#define SCLK_EMMC_SAMPLE 121 -#define SCLK_USBPHY480M_SRC 122 -#define SCLK_PVTM_CORE 123 -#define SCLK_PVTM_GPU 124 -#define SCLK_CRYPTO 125 -#define SCLK_MIPIDSI_24M 126 -#define SCLK_VIP_OUT 127 - -#define SCLK_MAC_PLL 150 -#define SCLK_MAC 151 -#define SCLK_MACREF_OUT 152 - -#define DCLK_VOP0 190 -#define DCLK_VOP1 191 - -/* aclk gates */ -#define ACLK_GPU 192 -#define ACLK_DMAC1 193 -#define ACLK_DMAC2 194 -#define ACLK_MMU 195 -#define ACLK_GMAC 196 -#define ACLK_VOP0 197 -#define ACLK_VOP1 198 -#define ACLK_CRYPTO 199 -#define ACLK_RGA 200 -#define ACLK_RGA_NIU 201 -#define ACLK_IEP 202 -#define ACLK_VIO0_NIU 203 -#define ACLK_VIP 204 -#define ACLK_ISP 205 -#define ACLK_VIO1_NIU 206 -#define ACLK_HEVC 207 -#define ACLK_VCODEC 208 -#define ACLK_CPU 209 -#define ACLK_PERI 210 - -/* pclk gates */ -#define PCLK_GPIO0 320 -#define PCLK_GPIO1 321 -#define PCLK_GPIO2 322 -#define PCLK_GPIO3 323 -#define PCLK_GPIO4 324 -#define PCLK_GPIO5 325 -#define PCLK_GPIO6 326 -#define PCLK_GPIO7 327 -#define PCLK_GPIO8 328 -#define PCLK_GRF 329 -#define PCLK_SGRF 330 -#define PCLK_PMU 331 -#define PCLK_I2C0 332 -#define PCLK_I2C1 333 -#define PCLK_I2C2 334 -#define PCLK_I2C3 335 -#define PCLK_I2C4 336 -#define PCLK_I2C5 337 -#define PCLK_SPI0 338 -#define PCLK_SPI1 339 -#define PCLK_SPI2 340 -#define PCLK_UART0 341 -#define PCLK_UART1 342 -#define PCLK_UART2 343 -#define PCLK_UART3 344 -#define PCLK_UART4 345 -#define PCLK_TSADC 346 -#define PCLK_SARADC 347 -#define PCLK_SIM 348 -#define PCLK_GMAC 349 -#define PCLK_PWM 350 -#define PCLK_RKPWM 351 -#define PCLK_PS2C 352 -#define PCLK_TIMER 353 -#define PCLK_TZPC 354 -#define PCLK_EDP_CTRL 355 -#define PCLK_MIPI_DSI0 356 -#define PCLK_MIPI_DSI1 357 -#define PCLK_MIPI_CSI 358 -#define PCLK_LVDS_PHY 359 -#define PCLK_HDMI_CTRL 360 -#define PCLK_VIO2_H2P 361 -#define PCLK_CPU 362 -#define PCLK_PERI 363 -#define PCLK_DDRUPCTL0 364 -#define PCLK_PUBL0 365 -#define PCLK_DDRUPCTL1 366 -#define PCLK_PUBL1 367 -#define PCLK_WDT 368 -#define PCLK_EFUSE256 369 -#define PCLK_EFUSE1024 370 -#define PCLK_ISP_IN 371 - -/* hclk gates */ -#define HCLK_GPS 448 -#define HCLK_OTG0 449 -#define HCLK_USBHOST0 450 -#define HCLK_USBHOST1 451 -#define HCLK_HSIC 452 -#define HCLK_NANDC0 453 -#define HCLK_NANDC1 454 -#define HCLK_TSP 455 -#define HCLK_SDMMC 456 -#define HCLK_SDIO0 457 -#define HCLK_SDIO1 458 -#define HCLK_EMMC 459 -#define HCLK_HSADC 460 -#define HCLK_CRYPTO 461 -#define HCLK_I2S0 462 -#define HCLK_SPDIF 463 -#define HCLK_SPDIF8CH 464 -#define HCLK_VOP0 465 -#define HCLK_VOP1 466 -#define HCLK_ROM 467 -#define HCLK_IEP 468 -#define HCLK_ISP 469 -#define HCLK_RGA 470 -#define HCLK_VIO_AHB_ARBI 471 -#define HCLK_VIO_NIU 472 -#define HCLK_VIP 473 -#define HCLK_VIO2_H2P 474 -#define HCLK_HEVC 475 -#define HCLK_VCODEC 476 -#define HCLK_CPU 477 -#define HCLK_PERI 478 - -#define CLK_NR_CLKS (HCLK_PERI + 1) - -/* soft-reset indices */ -#define SRST_CORE0 0 -#define SRST_CORE1 1 -#define SRST_CORE2 2 -#define SRST_CORE3 3 -#define SRST_CORE0_PO 4 -#define SRST_CORE1_PO 5 -#define SRST_CORE2_PO 6 -#define SRST_CORE3_PO 7 -#define SRST_PDCORE_STRSYS 8 -#define SRST_PDBUS_STRSYS 9 -#define SRST_L2C 10 -#define SRST_TOPDBG 11 -#define SRST_CORE0_DBG 12 -#define SRST_CORE1_DBG 13 -#define SRST_CORE2_DBG 14 -#define SRST_CORE3_DBG 15 - -#define SRST_PDBUG_AHB_ARBITOR 16 -#define SRST_EFUSE256 17 -#define SRST_DMAC1 18 -#define SRST_INTMEM 19 -#define SRST_ROM 20 -#define SRST_SPDIF8CH 21 -#define SRST_TIMER 22 -#define SRST_I2S0 23 -#define SRST_SPDIF 24 -#define SRST_TIMER0 25 -#define SRST_TIMER1 26 -#define SRST_TIMER2 27 -#define SRST_TIMER3 28 -#define SRST_TIMER4 29 -#define SRST_TIMER5 30 -#define SRST_EFUSE 31 - -#define SRST_GPIO0 32 -#define SRST_GPIO1 33 -#define SRST_GPIO2 34 -#define SRST_GPIO3 35 -#define SRST_GPIO4 36 -#define SRST_GPIO5 37 -#define SRST_GPIO6 38 -#define SRST_GPIO7 39 -#define SRST_GPIO8 40 -#define SRST_I2C0 42 -#define SRST_I2C1 43 -#define SRST_I2C2 44 -#define SRST_I2C3 45 -#define SRST_I2C4 46 -#define SRST_I2C5 47 - -#define SRST_DWPWM 48 -#define SRST_MMC_PERI 49 -#define SRST_PERIPH_MMU 50 -#define SRST_DAP 51 -#define SRST_DAP_SYS 52 -#define SRST_TPIU 53 -#define SRST_PMU_APB 54 -#define SRST_GRF 55 -#define SRST_PMU 56 -#define SRST_PERIPH_AXI 57 -#define SRST_PERIPH_AHB 58 -#define SRST_PERIPH_APB 59 -#define SRST_PERIPH_NIU 60 -#define SRST_PDPERI_AHB_ARBI 61 -#define SRST_EMEM 62 -#define SRST_USB_PERI 63 - -#define SRST_DMAC2 64 -#define SRST_MAC 66 -#define SRST_GPS 67 -#define SRST_RKPWM 69 -#define SRST_CCP 71 -#define SRST_USBHOST0 72 -#define SRST_HSIC 73 -#define SRST_HSIC_AUX 74 -#define SRST_HSIC_PHY 75 -#define SRST_HSADC 76 -#define SRST_NANDC0 77 -#define SRST_NANDC1 78 - -#define SRST_TZPC 80 -#define SRST_SPI0 83 -#define SRST_SPI1 84 -#define SRST_SPI2 85 -#define SRST_SARADC 87 -#define SRST_PDALIVE_NIU 88 -#define SRST_PDPMU_INTMEM 89 -#define SRST_PDPMU_NIU 90 -#define SRST_SGRF 91 - -#define SRST_VIO_ARBI 96 -#define SRST_RGA_NIU 97 -#define SRST_VIO0_NIU_AXI 98 -#define SRST_VIO_NIU_AHB 99 -#define SRST_LCDC0_AXI 100 -#define SRST_LCDC0_AHB 101 -#define SRST_LCDC0_DCLK 102 -#define SRST_VIO1_NIU_AXI 103 -#define SRST_VIP 104 -#define SRST_RGA_CORE 105 -#define SRST_IEP_AXI 106 -#define SRST_IEP_AHB 107 -#define SRST_RGA_AXI 108 -#define SRST_RGA_AHB 109 -#define SRST_ISP 110 -#define SRST_EDP 111 - -#define SRST_VCODEC_AXI 112 -#define SRST_VCODEC_AHB 113 -#define SRST_VIO_H2P 114 -#define SRST_MIPIDSI0 115 -#define SRST_MIPIDSI1 116 -#define SRST_MIPICSI 117 -#define SRST_LVDS_PHY 118 -#define SRST_LVDS_CON 119 -#define SRST_GPU 120 -#define SRST_HDMI 121 -#define SRST_CORE_PVTM 124 -#define SRST_GPU_PVTM 125 - -#define SRST_MMC0 128 -#define SRST_SDIO0 129 -#define SRST_SDIO1 130 -#define SRST_EMMC 131 -#define SRST_USBOTG_AHB 132 -#define SRST_USBOTG_PHY 133 -#define SRST_USBOTG_CON 134 -#define SRST_USBHOST0_AHB 135 -#define SRST_USBHOST0_PHY 136 -#define SRST_USBHOST0_CON 137 -#define SRST_USBHOST1_AHB 138 -#define SRST_USBHOST1_PHY 139 -#define SRST_USBHOST1_CON 140 -#define SRST_USB_ADP 141 -#define SRST_ACC_EFUSE 142 - -#define SRST_CORESIGHT 144 -#define SRST_PD_CORE_AHB_NOC 145 -#define SRST_PD_CORE_APB_NOC 146 -#define SRST_PD_CORE_MP_AXI 147 -#define SRST_GIC 148 -#define SRST_LCDC_PWM0 149 -#define SRST_LCDC_PWM1 150 -#define SRST_VIO0_H2P_BRG 151 -#define SRST_VIO1_H2P_BRG 152 -#define SRST_RGA_H2P_BRG 153 -#define SRST_HEVC 154 -#define SRST_TSADC 159 - -#define SRST_DDRPHY0 160 -#define SRST_DDRPHY0_APB 161 -#define SRST_DDRCTRL0 162 -#define SRST_DDRCTRL0_APB 163 -#define SRST_DDRPHY0_CTRL 164 -#define SRST_DDRPHY1 165 -#define SRST_DDRPHY1_APB 166 -#define SRST_DDRCTRL1 167 -#define SRST_DDRCTRL1_APB 168 -#define SRST_DDRPHY1_CTRL 169 -#define SRST_DDRMSCH0 170 -#define SRST_DDRMSCH1 171 -#define SRST_CRYPTO 174 -#define SRST_C2C_HOST 175 - -#define SRST_LCDC1_AXI 176 -#define SRST_LCDC1_AHB 177 -#define SRST_LCDC1_DCLK 178 -#define SRST_UART0 179 -#define SRST_UART1 180 -#define SRST_UART2 181 -#define SRST_UART3 182 -#define SRST_UART4 183 -#define SRST_SIMC 186 -#define SRST_PS2C 187 -#define SRST_TSP 188 -#define SRST_TSP_CLKIN0 189 -#define SRST_TSP_CLKIN1 190 -#define SRST_TSP_27M 191 - -#endif diff --git a/include/dt-bindings/power/rk3288-power.h b/include/dt-bindings/power/rk3288-power.h deleted file mode 100644 index f710b56ccd81..000000000000 --- a/include/dt-bindings/power/rk3288-power.h +++ /dev/null @@ -1,32 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __DT_BINDINGS_POWER_RK3288_POWER_H__ -#define __DT_BINDINGS_POWER_RK3288_POWER_H__ - -/** - * RK3288 Power Domain and Voltage Domain Summary. - */ - -/* VD_CORE */ -#define RK3288_PD_A17_0 0 -#define RK3288_PD_A17_1 1 -#define RK3288_PD_A17_2 2 -#define RK3288_PD_A17_3 3 -#define RK3288_PD_SCU 4 -#define RK3288_PD_DEBUG 5 -#define RK3288_PD_MEM 6 - -/* VD_LOGIC */ -#define RK3288_PD_BUS 7 -#define RK3288_PD_PERI 8 -#define RK3288_PD_VIO 9 -#define RK3288_PD_ALIVE 10 -#define RK3288_PD_HEVC 11 -#define RK3288_PD_VIDEO 12 - -/* VD_GPU */ -#define RK3288_PD_GPU 13 - -/* VD_PMU */ -#define RK3288_PD_PMU 14 - -#endif -- 2.39.5

2 1

[PATCH v1] rockchip: use OF_UPSTREAM for rk3288
by Johan Jonker 09 Dec '24

09 Dec '24

The device tree for rk3288 combined is now available in the /dts/upstream directory. Use imply OF_UPSTREAM to migrate all rk3288 boards. Clean up MAINTAINERS. Signed-off-by: Johan Jonker <jbx6244(a)gmail.com> --- ...boot.dtsi => rk3288-evb-rk808-u-boot.dtsi} | 0 arch/arm/dts/rk3288-evb.dts | 20 - arch/arm/dts/rk3288-evb.dtsi | 476 ---- arch/arm/dts/rk3288-firefly.dts | 43 - arch/arm/dts/rk3288-firefly.dtsi | 491 ---- arch/arm/dts/rk3288-miqi.dts | 16 - arch/arm/dts/rk3288-miqi.dtsi | 417 ---- arch/arm/dts/rk3288-popmetal.dts | 20 - arch/arm/dts/rk3288-popmetal.dtsi | 547 ----- arch/arm/dts/rk3288-rock-pi-n8.dts | 17 - arch/arm/dts/rk3288-rock2-som.dtsi | 278 --- arch/arm/dts/rk3288-rock2-square.dts | 181 -- arch/arm/dts/rk3288-tinker-s.dts | 29 - arch/arm/dts/rk3288-tinker.dts | 33 - arch/arm/dts/rk3288-tinker.dtsi | 533 ----- arch/arm/dts/rk3288-veyron-chromebook.dtsi | 205 -- arch/arm/dts/rk3288-veyron-jerry.dts | 208 -- arch/arm/dts/rk3288-veyron-mickey.dts | 266 --- arch/arm/dts/rk3288-veyron-minnie.dts | 302 --- arch/arm/dts/rk3288-veyron-speedy.dts | 143 -- arch/arm/dts/rk3288-veyron-u-boot.dtsi | 8 + arch/arm/dts/rk3288-veyron.dtsi | 795 ------- arch/arm/dts/rk3288-vmarc-som.dtsi | 361 --- arch/arm/dts/rk3288-vyasa.dts | 473 ---- arch/arm/dts/rk3288.dtsi | 2035 ----------------- arch/arm/mach-rockchip/Kconfig | 1 + board/chipspark/popmetal_rk3288/MAINTAINERS | 4 +- board/google/veyron/MAINTAINERS | 10 +- board/mqmaker/miqi_rk3288/MAINTAINERS | 4 +- board/rockchip/evb_rk3288/MAINTAINERS | 7 +- board/rockchip/tinker_rk3288/MAINTAINERS | 8 +- configs/chromebit_mickey_defconfig | 4 +- configs/chromebook_jerry_defconfig | 4 +- configs/chromebook_minnie_defconfig | 4 +- configs/chromebook_speedy_defconfig | 4 +- ...8_defconfig => evb-rk808-rk3288_defconfig} | 4 +- configs/firefly-rk3288_defconfig | 4 +- configs/miqi-rk3288_defconfig | 4 +- configs/phycore-rk3288_defconfig | 1 - configs/popmetal-rk3288_defconfig | 4 +- configs/rock-pi-n8-rk3288_defconfig | 2 +- configs/rock2_defconfig | 4 +- configs/tinker-rk3288_defconfig | 4 +- configs/tinker-s-rk3288_defconfig | 4 +- configs/vyasa-rk3288_defconfig | 4 +- doc/board/rockchip/rockchip.rst | 5 +- 46 files changed, 44 insertions(+), 7943 deletions(-) rename arch/arm/dts/{rk3288-evb-u-boot.dtsi => rk3288-evb-rk808-u-boot.dtsi} (100%) delete mode 100644 arch/arm/dts/rk3288-evb.dts delete mode 100644 arch/arm/dts/rk3288-evb.dtsi delete mode 100644 arch/arm/dts/rk3288-firefly.dts delete mode 100644 arch/arm/dts/rk3288-firefly.dtsi delete mode 100644 arch/arm/dts/rk3288-miqi.dts delete mode 100644 arch/arm/dts/rk3288-miqi.dtsi delete mode 100644 arch/arm/dts/rk3288-popmetal.dts delete mode 100644 arch/arm/dts/rk3288-popmetal.dtsi delete mode 100644 arch/arm/dts/rk3288-rock-pi-n8.dts delete mode 100644 arch/arm/dts/rk3288-rock2-som.dtsi delete mode 100644 arch/arm/dts/rk3288-rock2-square.dts delete mode 100644 arch/arm/dts/rk3288-tinker-s.dts delete mode 100644 arch/arm/dts/rk3288-tinker.dts delete mode 100644 arch/arm/dts/rk3288-tinker.dtsi delete mode 100644 arch/arm/dts/rk3288-veyron-chromebook.dtsi delete mode 100644 arch/arm/dts/rk3288-veyron-jerry.dts delete mode 100644 arch/arm/dts/rk3288-veyron-mickey.dts delete mode 100644 arch/arm/dts/rk3288-veyron-minnie.dts delete mode 100644 arch/arm/dts/rk3288-veyron-speedy.dts delete mode 100644 arch/arm/dts/rk3288-veyron.dtsi delete mode 100644 arch/arm/dts/rk3288-vmarc-som.dtsi delete mode 100644 arch/arm/dts/rk3288-vyasa.dts delete mode 100644 arch/arm/dts/rk3288.dtsi rename configs/{evb-rk3288_defconfig => evb-rk808-rk3288_defconfig} (95%) diff --git a/arch/arm/dts/rk3288-evb-u-boot.dtsi b/arch/arm/dts/rk3288-evb-rk808-u-boot.dtsi similarity index 100% rename from arch/arm/dts/rk3288-evb-u-boot.dtsi rename to arch/arm/dts/rk3288-evb-rk808-u-boot.dtsi diff --git a/arch/arm/dts/rk3288-evb.dts b/arch/arm/dts/rk3288-evb.dts deleted file mode 100644 index bb24a96cddf7..000000000000 --- a/arch/arm/dts/rk3288-evb.dts +++ /dev/null @@ -1,20 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ OR X11 -/* - * (C) Copyright 2016 Rockchip Electronics Co., Ltd - */ - -/dts-v1/; -#include "rk3288-evb.dtsi" - -/ { - model = "Evb-RK3288"; - compatible = "evb-rk3288,evb-rk3288", "rockchip,rk3288"; - - chosen { - stdout-path = &uart2; - }; -}; - -&pwm1 { - status = "okay"; -}; diff --git a/arch/arm/dts/rk3288-evb.dtsi b/arch/arm/dts/rk3288-evb.dtsi deleted file mode 100644 index 0e347beb154d..000000000000 --- a/arch/arm/dts/rk3288-evb.dtsi +++ /dev/null @@ -1,476 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ OR X11 -/* - * (C) Copyright 2016 Rockchip Electronics Co., Ltd - */ - -#include "rk3288.dtsi" - -/ { - memory { - reg = <0x0 0x0 0x0 0x80000000>; - }; - - ext_gmac: external-gmac-clock { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <125000000>; - clock-output-names = "ext_gmac"; - }; - - keys: gpio-keys { - compatible = "gpio-keys"; - - button@0 { - gpio-key,wakeup = <1>; - gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; - label = "GPIO Power"; - linux,code = <116>; - pinctrl-names = "default"; - pinctrl-0 = <&pwr_key>; - }; - }; - - vcc_sys: vsys-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc_sys"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; - }; - - vcc_flash: flash-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc_flash"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc_io>; - }; - - vcc_5v: usb-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc_5v"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc_sys>; - }; - - vcc_host_5v: usb-host-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&host_vbus_drv>; - regulator-name = "vcc_host_5v"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - vin-supply = <&vcc_5v>; - }; - - vcc_otg_5v: usb-otg-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&otg_vbus_drv>; - regulator-name = "vcc_otg_5v"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - vin-supply = <&vcc_5v>; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - power-supply = <&vcc_sys>; - enable-gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>; - brightness-levels = < - 0 1 2 3 4 5 6 7 - 8 9 10 11 12 13 14 15 - 16 17 18 19 20 21 22 23 - 24 25 26 27 28 29 30 31 - 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 - 48 49 50 51 52 53 54 55 - 56 57 58 59 60 61 62 63 - 64 65 66 67 68 69 70 71 - 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 - 88 89 90 91 92 93 94 95 - 96 97 98 99 100 101 102 103 - 104 105 106 107 108 109 110 111 - 112 113 114 115 116 117 118 119 - 120 121 122 123 124 125 126 127 - 128 129 130 131 132 133 134 135 - 136 137 138 139 140 141 142 143 - 144 145 146 147 148 149 150 151 - 152 153 154 155 156 157 158 159 - 160 161 162 163 164 165 166 167 - 168 169 170 171 172 173 174 175 - 176 177 178 179 180 181 182 183 - 184 185 186 187 188 189 190 191 - 192 193 194 195 196 197 198 199 - 200 201 202 203 204 205 206 207 - 208 209 210 211 212 213 214 215 - 216 217 218 219 220 221 222 223 - 224 225 226 227 228 229 230 231 - 232 233 234 235 236 237 238 239 - 240 241 242 243 244 245 246 247 - 248 249 250 251 252 253 254 255>; - default-brightness-level = <50>; - pwms = <&pwm0 0 25000 0>; - pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pin>; - pwm-delay-us = <10000>; - status = "disabled"; - }; - - panel: panel { - compatible = "simple-panel"; - power-supply = <&vcc_io>; - backlight = <&backlight>; - enable-gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>; - status = "disabled"; - }; -}; - -&cpu0 { - cpu0-supply = <&vdd_cpu>; -}; - -&emmc { - broken-cd; - bus-width = <8>; - cap-mmc-highspeed; - disable-wp; - non-removable; - num-slots = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_pwr>, <&emmc_bus8>; - status = "okay"; -}; - -&gmac { - phy-mode = "rgmii"; - clock_in_out = "input"; - snps,reset-gpio = <&gpio4 7 0>; - snps,reset-active-low; - snps,reset-delays-us = <0 10000 1000000>; - assigned-clocks = <&cru SCLK_MAC>; - assigned-clock-parents = <&ext_gmac>; - pinctrl-names = "default"; - pinctrl-0 = <&rgmii_pins>; - tx_delay = <0x30>; - rx_delay = <0x10>; - status = "okay"; -}; - -&hdmi { - ddc-i2c-bus = <&i2c5>; - status = "okay"; -}; - -&i2c0 { - clock-frequency = <400000>; - status = "okay"; - - vdd_cpu: syr827@40 { - compatible = "silergy,syr827"; - fcs,suspend-voltage-selector = <1>; - reg = <0x40>; - regulator-name = "vdd_cpu"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc_sys>; - }; - - vdd_gpu: syr828@41 { - compatible = "silergy,syr828"; - fcs,suspend-voltage-selector = <1>; - reg = <0x41>; - regulator-name = "vdd_gpu"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - vin-supply = <&vcc_sys>; - }; - - hym8563: hym8563@51 { - compatible = "haoyu,hym8563"; - reg = <0x51>; - #clock-cells = <0>; - clock-frequency = <32768>; - clock-output-names = "xin32k"; - interrupt-parent = <&gpio7>; - interrupts = <4 IRQ_TYPE_EDGE_FALLING>; - pinctrl-names = "default"; - pinctrl-0 = <&rtc_int>; - }; - - act8846: act8846@5a { - compatible = "active-semi,act8846"; - reg = <0x5a>; - pinctrl-names = "default"; - pinctrl-0 = <&pwr_hold>; - system-power-controller; - - regulators { - vcc_ddr: REG1 { - regulator-name = "vcc_ddr"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - }; - - vcc_io: REG2 { - regulator-name = "vcc_io"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vdd_log: REG3 { - regulator-name = "vdd_log"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - }; - - vcc_20: REG4 { - regulator-name = "vcc_20"; - regulator-min-microvolt = <2000000>; - regulator-max-microvolt = <2000000>; - regulator-always-on; - }; - - vccio_sd: REG5 { - regulator-name = "vccio_sd"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vdd10_lcd: REG6 { - regulator-name = "vdd10_lcd"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - vcca_codec: REG7 { - regulator-name = "vcca_codec"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - vcc_tp: REG8 { - regulator-name = "vcca_33"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - vccio_pmu: REG9 { - regulator-name = "vccio_pmu"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - vdd_10: REG10 { - regulator-name = "vdd_10"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - vcc_18: REG11 { - regulator-name = "vcc_18"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - vcc18_lcd: REG12 { - regulator-name = "vcc18_lcd"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - }; - }; -}; - -&i2c1 { - status = "okay"; -}; - -&i2c2 { - status = "okay"; -}; - -&i2c4 { - status = "okay"; -}; - -&i2c5 { - status = "okay"; -}; - -&pinctrl { - pcfg_output_high: pcfg-output-high { - output-high; - }; - - pcfg_output_low: pcfg-output-low { - output-low; - }; - - act8846 { - pwr_hold: pwr-hold { - rockchip,pins = <0 9 RK_FUNC_GPIO &pcfg_output_high>; - }; - }; - - hym8563 { - rtc_int: rtc-int { - rockchip,pins = <0 4 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - keys { - pwr_key: pwr-key { - rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - sdmmc { - sdmmc_pwr: sdmmc-pwr { - rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - usb_host { - host_vbus_drv: host-vbus-drv { - rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - usb_otg { - otg_vbus_drv: otg-vbus-drv { - rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; -}; - -&pwm0 { - status = "okay"; -}; - -&saradc { - vref-supply = <&vcc_18>; - status = "okay"; -}; - -&sdio0 { - broken-cd; - bus-width = <4>; - disable-wp; - non-removable; - num-slots = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&sdio0_bus4>, <&sdio0_cmd>, <&sdio0_clk>; - vmmc-supply = <&vcc_18>; - status = "disabled"; -}; - -&sdmmc { - bus-width = <4>; - cap-mmc-highspeed; - cap-sd-highspeed; - card-detect-delay = <200>; - disable-wp; - num-slots = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>; - vmmc-supply = <&vccio_sd>; - status = "okay"; -}; - -&spi0 { - pinctrl-names = "default"; - pinctrl-0 = <&spi0_clk>, <&spi0_cs0>, <&spi0_tx>, <&spi0_rx>, <&spi0_cs1>; - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_xfer>, <&uart0_cts>, <&uart0_rts>; - status = "okay"; -}; - -&uart1 { - status = "okay"; -}; - -&uart2 { - status = "okay"; -}; - -&uart3 { - status = "okay"; -}; - -&usb_host1 { - status = "okay"; -}; - -&usb_otg { - status = "okay"; -}; - -&vopb { - status = "okay"; -}; - -&vopb_mmu { - status = "okay"; -}; - -&vopl { - status = "okay"; -}; - -&vopl_mmu { - status = "okay"; -}; - -&mipi_dsi { - status = "disabled"; - rockchip,panel = <&panel>; - display-timings { - timing0 { - bits-per-pixel = <24>; - clock-frequency = <160000000>; - hfront-porch = <120>; - hsync-len = <20>; - hback-porch = <21>; - hactive = <1200>; - vfront-porch = <21>; - vsync-len = <3>; - vback-porch = <18>; - vactive = <1920>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - }; -}; - -&wdt { - status = "okay"; -}; diff --git a/arch/arm/dts/rk3288-firefly.dts b/arch/arm/dts/rk3288-firefly.dts deleted file mode 100644 index 72982efdf6df..000000000000 --- a/arch/arm/dts/rk3288-firefly.dts +++ /dev/null @@ -1,43 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ OR X11 -/* - * Copyright (c) 2014, 2015 FUKAUMI Naoki <naobsd(a)gmail.com> - */ - -/dts-v1/; -#include "rk3288-firefly.dtsi" - -/ { - model = "Firefly-RK3288"; - compatible = "firefly,firefly-rk3288", "rockchip,rk3288"; - - chosen { - stdout-path = &uart2; - }; -}; - -&ir { - gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; -}; - -&pinctrl { - act8846 { - pmic_vsel: pmic-vsel { - rockchip,pins = <7 14 RK_FUNC_GPIO &pcfg_output_low>; - }; - }; - - ir { - ir_int: ir-int { - rockchip,pins = <7 0 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - usb_host { - host_vbus_drv: host-vbus-drv { - rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; -}; - -&pwm1 { - status = "okay"; -}; diff --git a/arch/arm/dts/rk3288-firefly.dtsi b/arch/arm/dts/rk3288-firefly.dtsi deleted file mode 100644 index 0824b19ee642..000000000000 --- a/arch/arm/dts/rk3288-firefly.dtsi +++ /dev/null @@ -1,491 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ OR X11 -/* - * Copyright (c) 2014, 2015 FUKAUMI Naoki <naobsd(a)gmail.com> - */ - -#include "rk3288.dtsi" - -/ { - memory { - reg = <0x0 0x0 0x0 0x80000000>; - }; - - ext_gmac: external-gmac-clock { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <125000000>; - clock-output-names = "ext_gmac"; - }; - - ir: ir-receiver { - compatible = "gpio-ir-receiver"; - pinctrl-names = "default"; - pinctrl-0 = <&ir_int>; - }; - - keys: gpio-keys { - compatible = "gpio-keys"; - - button@0 { - gpio-key,wakeup = <1>; - gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; - label = "GPIO Power"; - linux,code = <116>; - pinctrl-names = "default"; - pinctrl-0 = <&pwr_key>; - }; - }; - - leds { - compatible = "gpio-leds"; - - work { - gpios = <&gpio8 1 GPIO_ACTIVE_LOW>; - label = "firefly:blue:user"; - linux,default-trigger = "rc-feedback"; - pinctrl-names = "default"; - pinctrl-0 = <&work_led>; - }; - - power { - gpios = <&gpio8 2 GPIO_ACTIVE_LOW>; - label = "firefly:green:power"; - linux,default-trigger = "default-on"; - pinctrl-names = "default"; - pinctrl-0 = <&power_led>; - }; - }; - - vcc_sys: vsys-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc_sys"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; - }; - - vcc_sd: sdmmc-regulator { - compatible = "regulator-fixed"; - gpio = <&gpio7 11 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc_pwr>; - regulator-name = "vcc_sd"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - startup-delay-us = <100000>; - vin-supply = <&vcc_io>; - }; - - vcc_flash: flash-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc_flash"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc_io>; - }; - - vcc_5v: usb-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc_5v"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc_sys>; - }; - - vcc_host_5v: usb-host-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&host_vbus_drv>; - regulator-name = "vcc_host_5v"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - vin-supply = <&vcc_5v>; - }; - - vcc_otg_5v: usb-otg-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&otg_vbus_drv>; - regulator-name = "vcc_otg_5v"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - vin-supply = <&vcc_5v>; - }; -}; - -&cpu0 { - cpu0-supply = <&vdd_cpu>; -}; - -&emmc { - broken-cd; - bus-width = <8>; - cap-mmc-highspeed; - disable-wp; - non-removable; - num-slots = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_pwr>, <&emmc_bus8>; - vmmc-supply = <&vcc_io>; - vqmmc-supply = <&vcc_flash>; - status = "okay"; -}; - -&gmac { - assigned-clocks = <&cru SCLK_MAC>; - assigned-clock-parents = <&ext_gmac>; - clock_in_out = "input"; - pinctrl-names = "default"; - pinctrl-0 = <&rgmii_pins>, <&phy_rst>, <&phy_pmeb>, <&phy_int>; - phy-supply = <&vcc_lan>; - phy-mode = "rgmii"; - snps,reset-active-low; - snps,reset-delays-us = <0 10000 1000000>; - snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>; - tx_delay = <0x30>; - rx_delay = <0x10>; - status = "okay"; -}; - -&hdmi { - ddc-i2c-bus = <&i2c5>; - status = "okay"; -}; - -&i2c0 { - clock-frequency = <400000>; - status = "okay"; - - vdd_cpu: syr827@40 { - compatible = "silergy,syr827"; - fcs,suspend-voltage-selector = <1>; - reg = <0x40>; - regulator-name = "vdd_cpu"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc_sys>; - }; - - vdd_gpu: syr828@41 { - compatible = "silergy,syr828"; - fcs,suspend-voltage-selector = <1>; - reg = <0x41>; - regulator-name = "vdd_gpu"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - vin-supply = <&vcc_sys>; - }; - - hym8563: hym8563@51 { - compatible = "haoyu,hym8563"; - reg = <0x51>; - #clock-cells = <0>; - clock-frequency = <32768>; - clock-output-names = "xin32k"; - interrupt-parent = <&gpio7>; - interrupts = <4 IRQ_TYPE_EDGE_FALLING>; - pinctrl-names = "default"; - pinctrl-0 = <&rtc_int>; - }; - - act8846: act8846@5a { - compatible = "active-semi,act8846"; - reg = <0x5a>; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_vsel>, <&pwr_hold>; - system-power-controller; - - regulators { - vcc_ddr: REG1 { - regulator-name = "vcc_ddr"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - }; - - vcc_io: REG2 { - regulator-name = "vcc_io"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vdd_log: REG3 { - regulator-name = "vdd_log"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - }; - - vcc_20: REG4 { - regulator-name = "vcc_20"; - regulator-min-microvolt = <2000000>; - regulator-max-microvolt = <2000000>; - regulator-always-on; - }; - - vccio_sd: REG5 { - regulator-name = "vccio_sd"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vdd10_lcd: REG6 { - regulator-name = "vdd10_lcd"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - vcca_18: REG7 { - regulator-name = "vcca_18"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - vcca_33: REG8 { - regulator-name = "vcca_33"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - vcc_lan: REG9 { - regulator-name = "vcc_lan"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - vdd_10: REG10 { - regulator-name = "vdd_10"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - vcc_18: REG11 { - regulator-name = "vcc_18"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - vcc18_lcd: REG12 { - regulator-name = "vcc18_lcd"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - }; - }; -}; - -&i2c1 { - status = "okay"; -}; - -&i2c2 { - status = "okay"; -}; - -&i2c4 { - status = "okay"; -}; - -&i2c5 { - status = "okay"; -}; - -&pinctrl { - pcfg_output_high: pcfg-output-high { - output-high; - }; - - pcfg_output_low: pcfg-output-low { - output-low; - }; - - pcfg_pull_up_drv_12ma: pcfg-pull-up-drv-12ma { - bias-pull-up; - drive-strength = <12>; - }; - - act8846 { - pwr_hold: pwr-hold { - rockchip,pins = <0 1 RK_FUNC_GPIO &pcfg_output_high>; - }; - }; - - gmac { - phy_int: phy-int { - rockchip,pins = <0 9 RK_FUNC_GPIO &pcfg_pull_up>; - }; - - phy_pmeb: phy-pmeb { - rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_up>; - }; - - phy_rst: phy-rst { - rockchip,pins = <4 8 RK_FUNC_GPIO &pcfg_output_high>; - }; - }; - - hym8563 { - rtc_int: rtc-int { - rockchip,pins = <7 4 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - keys { - pwr_key: pwr-key { - rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - leds { - power_led: power-led { - rockchip,pins = <8 2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - work_led: work-led { - rockchip,pins = <8 1 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - sdmmc { - /* - * Default drive strength isn't enough to achieve even - * high-speed mode on firefly board so bump up to 12ma. - */ - sdmmc_bus4: sdmmc-bus4 { - rockchip,pins = <6 RK_PC0 1 &pcfg_pull_up_drv_12ma>, - <6 RK_PC1 1 &pcfg_pull_up_drv_12ma>, - <6 RK_PC2 1 &pcfg_pull_up_drv_12ma>, - <6 RK_PC3 1 &pcfg_pull_up_drv_12ma>; - }; - - sdmmc_clk: sdmmc-clk { - rockchip,pins = <6 RK_PC4 1 &pcfg_pull_none_12ma>; - }; - - sdmmc_cmd: sdmmc-cmd { - rockchip,pins = <6 RK_PC5 1 &pcfg_pull_up_drv_12ma>; - }; - - sdmmc_pwr: sdmmc-pwr { - rockchip,pins = <7 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - usb_host { - host_vbus_drv: host-vbus-drv { - rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - usbhub_rst: usbhub-rst { - rockchip,pins = <8 3 RK_FUNC_GPIO &pcfg_output_high>; - }; - }; - - usb_otg { - otg_vbus_drv: otg-vbus-drv { - rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; -}; - -&saradc { - vref-supply = <&vcc_18>; - status = "okay"; -}; - -&sdio0 { - broken-cd; - bus-width = <4>; - disable-wp; - non-removable; - num-slots = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&sdio0_bus4>, <&sdio0_cmd>, <&sdio0_clk>; - vmmc-supply = <&vcc_18>; - status = "disabled"; -}; - -&sdmmc { - bus-width = <4>; - cap-mmc-highspeed; - cap-sd-highspeed; - card-detect-delay = <200>; - disable-wp; - num-slots = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>; - vmmc-supply = <&vcc_sd>; - status = "okay"; -}; - -&spi0 { - pinctrl-names = "default"; - pinctrl-0 = <&spi0_clk>, <&spi0_cs0>, <&spi0_tx>, <&spi0_rx>, <&spi0_cs1>; - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_xfer>, <&uart0_cts>, <&uart0_rts>; - status = "okay"; -}; - -&uart1 { - status = "okay"; -}; - -&uart2 { - status = "okay"; -}; - -&uart3 { - status = "okay"; -}; - -&usb_host1 { - pinctrl-names = "default"; - pinctrl-0 = <&usbhub_rst>; - status = "okay"; -}; - -&usb_otg { - status = "okay"; -}; - -&vopb { - status = "okay"; -}; - -&vopb_mmu { - status = "okay"; -}; - -&vopl { - status = "okay"; -}; - -&vopl_mmu { - status = "okay"; -}; - -&wdt { - status = "okay"; -}; diff --git a/arch/arm/dts/rk3288-miqi.dts b/arch/arm/dts/rk3288-miqi.dts deleted file mode 100644 index 4a2f249e1b1f..000000000000 --- a/arch/arm/dts/rk3288-miqi.dts +++ /dev/null @@ -1,16 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ OR X11 -/* - * (C) Copyright 2016 Rockchip Electronics Co., Ltd - */ - -/dts-v1/; -#include "rk3288-miqi.dtsi" - -/ { - model = "mqmaker MiQi"; - compatible = "mqmaker,miqi", "rockchip,rk3288"; - - chosen { - stdout-path = "serial2:115200n8"; - }; -}; diff --git a/arch/arm/dts/rk3288-miqi.dtsi b/arch/arm/dts/rk3288-miqi.dtsi deleted file mode 100644 index c56e1109e3ac..000000000000 --- a/arch/arm/dts/rk3288-miqi.dtsi +++ /dev/null @@ -1,417 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ OR X11 -/* - * Copyright (c) 2016 Heiko Stuebner <heiko(a)sntech.de> - */ - -#include "rk3288.dtsi" - -/ { - memory { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x80000000>; - }; - - ext_gmac: external-gmac-clock { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <125000000>; - clock-output-names = "ext_gmac"; - }; - - leds { - compatible = "gpio-leds"; - - work { - gpios = <&gpio7 4 GPIO_ACTIVE_LOW>; - label = "miqi:green:user"; - linux,default-trigger = "default-on"; - pinctrl-names = "default"; - pinctrl-0 = <&led_ctl>; - }; - }; - - vcc_flash: flash-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc_flash"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc_io>; - }; - - vcc_host: usb-host-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&host_vbus_drv>; - regulator-name = "vcc_host"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - vin-supply = <&vcc_sys>; - }; - - vcc_sd: sdmmc-regulator { - compatible = "regulator-fixed"; - gpio = <&gpio7 11 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc_pwr>; - regulator-name = "vcc_sd"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - startup-delay-us = <100000>; - vin-supply = <&vcc_io>; - }; - - vcc_sys: vsys-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc_sys"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; - }; -}; - -&cpu0 { - cpu0-supply = <&vdd_cpu>; -}; - -&emmc { - bus-width = <8>; - cap-mmc-highspeed; - disable-wp; - non-removable; - num-slots = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_pwr>, <&emmc_bus8>; - vmmc-supply = <&vcc_io>; - vqmmc-supply = <&vcc_flash>; - status = "okay"; -}; - -&gmac { - assigned-clocks = <&cru SCLK_MAC>; - assigned-clock-parents = <&ext_gmac>; - clock_in_out = "input"; - pinctrl-names = "default"; - pinctrl-0 = <&rgmii_pins>, <&phy_rst>, <&phy_pmeb>, <&phy_int>; - phy-supply = <&vcc_lan>; - phy-mode = "rgmii"; - snps,reset-active-low; - snps,reset-delays-us = <0 10000 1000000>; - snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>; - tx_delay = <0x30>; - rx_delay = <0x10>; - status = "okay"; -}; - -&hdmi { - ddc-i2c-bus = <&i2c5>; - status = "okay"; -}; - -&i2c0 { - clock-frequency = <400000>; - status = "okay"; - - vdd_cpu: syr827@40 { - compatible = "silergy,syr827"; - fcs,suspend-voltage-selector = <1>; - reg = <0x40>; - regulator-name = "vdd_cpu"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-boot-on; - regulator-enable-ramp-delay = <300>; - regulator-ramp-delay = <8000>; - vin-supply = <&vcc_sys>; - }; - - vdd_gpu: syr828@41 { - compatible = "silergy,syr828"; - fcs,suspend-voltage-selector = <1>; - reg = <0x41>; - regulator-name = "vdd_gpu"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - vin-supply = <&vcc_sys>; - }; - - hym8563: hym8563@51 { - compatible = "haoyu,hym8563"; - reg = <0x51>; - #clock-cells = <0>; - clock-frequency = <32768>; - clock-output-names = "xin32k"; - }; - - act8846: act8846@5a { - compatible = "active-semi,act8846"; - reg = <0x5a>; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_vsel>; - system-power-controller; - - vp1-supply = <&vcc_sys>; - vp2-supply = <&vcc_sys>; - vp3-supply = <&vcc_sys>; - vp4-supply = <&vcc_sys>; - inl1-supply = <&vcc_sys>; - inl2-supply = <&vcc_sys>; - inl3-supply = <&vcc_20>; - - regulators { - vcc_ddr: REG1 { - regulator-name = "vcc_ddr"; - regulator-always-on; - }; - - vcc_io: REG2 { - regulator-name = "vcc_io"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vdd_log: REG3 { - regulator-name = "vdd_log"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - }; - - vcc_20: REG4 { - regulator-name = "vcc_20"; - regulator-min-microvolt = <2000000>; - regulator-max-microvolt = <2000000>; - regulator-always-on; - }; - - vccio_sd: REG5 { - regulator-name = "vccio_sd"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vdd10_lcd: REG6 { - regulator-name = "vdd10_lcd"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - vcca_18: REG7 { - regulator-name = "vcca_18"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - vcca_33: REG8 { - regulator-name = "vcca_33"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - vcc_lan: REG9 { - regulator-name = "vcc_lan"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - vdd_10: REG10 { - regulator-name = "vdd_10"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - vcc_18: REG11 { - regulator-name = "vcc_18"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - vcc18_lcd: REG12 { - regulator-name = "vcc18_lcd"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - }; - }; -}; - -&i2c1 { - status = "okay"; -}; - -&i2c2 { - status = "okay"; -}; - -&i2c4 { - status = "okay"; -}; - -&i2c5 { - status = "okay"; -}; - -&io_domains { - audio-supply = <&vcca_33>; - flash0-supply = <&vcc_flash>; - flash1-supply = <&vcc_lan>; - gpio30-supply = <&vcc_io>; - gpio1830-supply = <&vcc_io>; - lcdc-supply = <&vcc_io>; - sdcard-supply = <&vccio_sd>; - wifi-supply = <&vcc_18>; - status = "okay"; -}; - -&pinctrl { - pcfg_output_high: pcfg-output-high { - output-high; - }; - - pcfg_output_low: pcfg-output-low { - output-low; - }; - - pcfg_pull_up_drv_12ma: pcfg-pull-up-drv-12ma { - bias-pull-up; - drive-strength = <12>; - }; - - act8846 { - pmic_int: pmic-int { - rockchip,pins = <0 4 RK_FUNC_GPIO &pcfg_pull_up>; - }; - - pmic_sleep: pmic-sleep { - rockchip,pins = <0 0 RK_FUNC_GPIO &pcfg_output_low>; - }; - - pmic_vsel: pmic-vsel { - rockchip,pins = <7 1 RK_FUNC_GPIO &pcfg_output_low>; - }; - }; - - gmac { - phy_int: phy-int { - rockchip,pins = <0 9 RK_FUNC_GPIO &pcfg_pull_up>; - }; - - phy_pmeb: phy-pmeb { - rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_up>; - }; - - phy_rst: phy-rst { - rockchip,pins = <4 8 RK_FUNC_GPIO &pcfg_output_high>; - }; - }; - - leds { - led_ctl: led-ctl { - rockchip,pins = <7 4 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - sdmmc { - /* - * Default drive strength isn't enough to achieve even - * high-speed mode on firefly board so bump up to 12ma. - */ - sdmmc_bus4: sdmmc-bus4 { - rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_12ma>, - <6 17 RK_FUNC_1 &pcfg_pull_up_drv_12ma>, - <6 18 RK_FUNC_1 &pcfg_pull_up_drv_12ma>, - <6 19 RK_FUNC_1 &pcfg_pull_up_drv_12ma>; - }; - - sdmmc_clk: sdmmc-clk { - rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_12ma>; - }; - - sdmmc_cmd: sdmmc-cmd { - rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_12ma>; - }; - - sdmmc_pwr: sdmmc-pwr { - rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - usb_host { - host_vbus_drv: host-vbus-drv { - rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; -}; - -&saradc { - vref-supply = <&vcc_18>; - status = "okay"; -}; - -&sdmmc { - bus-width = <4>; - cap-mmc-highspeed; - cap-sd-highspeed; - card-detect-delay = <200>; - disable-wp; - num-slots = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>; - vmmc-supply = <&vcc_sd>; - vqmmc-supply = <&vccio_sd>; - status = "okay"; -}; - -&tsadc { - rockchip,hw-tshut-mode = <0>; - rockchip,hw-tshut-polarity = <0>; - status = "okay"; -}; - -&uart2 { - status = "okay"; -}; - -&uart3 { - status = "okay"; -}; - -&usbphy { - status = "okay"; -}; - -&usb_host1 { - vbus-supply = <&vcc_host>; - status = "okay"; -}; - -&vopb { - status = "okay"; -}; - -&vopb_mmu { - status = "okay"; -}; - -&vopl { - status = "okay"; -}; - -&vopl_mmu { - status = "okay"; -}; - -&wdt { - status = "okay"; -}; diff --git a/arch/arm/dts/rk3288-popmetal.dts b/arch/arm/dts/rk3288-popmetal.dts deleted file mode 100644 index 736dc51e2615..000000000000 --- a/arch/arm/dts/rk3288-popmetal.dts +++ /dev/null @@ -1,20 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ OR X11 -/* - * (C) Copyright 2016 Rockchip Electronics Co., Ltd - */ - -/dts-v1/; -#include "rk3288-popmetal.dtsi" - -/ { - model = "PopMetal-RK3288"; - compatible = "chipspark,popmetal-rk3288", "rockchip,rk3288"; - - chosen { - stdout-path = &uart2; - }; -}; - -&pwm1 { - status = "okay"; -}; diff --git a/arch/arm/dts/rk3288-popmetal.dtsi b/arch/arm/dts/rk3288-popmetal.dtsi deleted file mode 100644 index ecff641b1099..000000000000 --- a/arch/arm/dts/rk3288-popmetal.dtsi +++ /dev/null @@ -1,547 +0,0 @@ -/* - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -#include <dt-bindings/input/input.h> -#include "rk3288.dtsi" - -/ { - memory{ - device_type = "memory"; - reg = <0x0 0x0 0x0 0x80000000>; - }; - - ext_gmac: external-gmac-clock { - compatible = "fixed-clock"; - clock-frequency = <125000000>; - clock-output-names = "ext_gmac"; - #clock-cells = <0>; - }; - - gpio-keys { - compatible = "gpio-keys"; - autorepeat; - - pinctrl-names = "default"; - pinctrl-0 = <&pwrbtn>; - - power { - gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; - label = "GPIO Key Power"; - linux,code = <KEY_POWER>; - linux,input-type = <1>; - wakeup-source; - debounce-interval = <100>; - }; - }; - - ir: ir-receiver { - compatible = "gpio-ir-receiver"; - gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&ir_int>; - }; - - vcc_flash: flash-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc_flash"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc_io>; - }; - - vcc_sd: sdmmc-regulator { - compatible = "regulator-fixed"; - gpio = <&gpio7 11 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc_pwr>; - regulator-name = "vcc_sd"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - startup-delay-us = <100000>; - vin-supply = <&vcc_io>; - }; - - vcc_sys: vsys-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc_sys"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; - }; - - /* - * A PT5128 creates both dovdd_1v8 and vcc28_dvp, controlled - * by the dvp_pwr pin. - */ - vcc18_dvp: vcc18-dvp-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc18-dvp"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc28_dvp>; - }; - - vcc28_dvp: vcc28-dvp-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio0 17 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&dvp_pwr>; - regulator-name = "vcc28_dvp"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - vin-supply = <&vcc_io>; - }; - - vcc5v0_host: usb-host-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&host_vbus_drv>; - regulator-name = "vcc5v0_host"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; -}; - -&cpu0 { - cpu0-supply = <&vdd_cpu>; -}; - -&emmc { - bus-width = <8>; - cap-mmc-highspeed; - disable-wp; - non-removable; - num-slots = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>; - vmmc-supply = <&vcc_io>; - vqmmc-supply = <&vcc_flash>; - status = "okay"; -}; - -&sdmmc { - bus-width = <4>; - cap-mmc-highspeed; - cap-sd-highspeed; - card-detect-delay = <200>; - disable-wp; - num-slots = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; - vmmc-supply = <&vcc_sd>; - vqmmc-supply = <&vccio_sd>; - status = "okay"; -}; - -&gmac { - phy-supply = <&vcc_lan>; - phy-mode = "rgmii"; - clock_in_out = "input"; - snps,reset-gpio = <&gpio4 7 0>; - snps,reset-active-low; - snps,reset-delays-us = <0 10000 1000000>; - assigned-clocks = <&cru SCLK_MAC>; - assigned-clock-parents = <&ext_gmac>; - pinctrl-names = "default"; - pinctrl-0 = <&rgmii_pins>; - tx_delay = <0x30>; - rx_delay = <0x10>; - status = "okay"; -}; - -&hdmi { - ddc-i2c-bus = <&i2c5>; - status = "okay"; -}; - -&i2c0 { - status = "okay"; - clock-frequency = <400000>; - - rk808: pmic@1b { - compatible = "rockchip,rk808"; - reg = <0x1b>; - interrupt-parent = <&gpio0>; - interrupts = <4 IRQ_TYPE_LEVEL_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_int &global_pwroff>; - rockchip,system-power-controller; - wakeup-source; - #clock-cells = <1>; - clock-output-names = "xin32k", "rk808-clkout2"; - - vcc1-supply = <&vcc_sys>; - vcc2-supply = <&vcc_sys>; - vcc3-supply = <&vcc_sys>; - vcc4-supply = <&vcc_sys>; - vcc6-supply = <&vcc_sys>; - vcc7-supply = <&vcc_sys>; - vcc8-supply = <&vcc_18>; - vcc9-supply = <&vcc_io>; - vcc10-supply = <&vcc_io>; - vcc11-supply = <&vcc_sys>; - vcc12-supply = <&vcc_io>; - vddio-supply = <&vcc_io>; - - regulators { - vdd_cpu: DCDC_REG1 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1350000>; - regulator-name = "vdd_arm"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_gpu: DCDC_REG2 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1250000>; - regulator-name = "vdd_gpu"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1000000>; - }; - }; - - vcc_ddr: DCDC_REG3 { - regulator-always-on; - regulator-boot-on; - regulator-name = "vcc_ddr"; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vcc_io: DCDC_REG4 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc_io"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcc_lan: LDO_REG1 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc_lan"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vccio_sd: LDO_REG2 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vccio_sd"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_10: LDO_REG3 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-name = "vdd_10"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1000000>; - }; - }; - - vcc18_lcd: LDO_REG4 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcc18_lcd"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - ldo5: LDO_REG5 { - regulator-always-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-name = "ldo5"; - }; - - vdd10_lcd: LDO_REG6 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-name = "vdd10_lcd"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1000000>; - }; - }; - - vcc_18: LDO_REG7 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcc_18"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcca_33: LDO_REG8 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcca_33"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vccio_wl: SWITCH_REG1 { - regulator-always-on; - regulator-boot-on; - regulator-name = "vccio_wl"; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vcc_lcd: SWITCH_REG2 { - regulator-always-on; - regulator-boot-on; - regulator-name = "vcc_lcd"; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - }; - }; -}; - -&i2c1 { - status = "okay"; - clock-frequency = <400000>; - - ak8963: ak8963@0d { - compatible = "asahi-kasei,ak8975"; - reg = <0x0d>; - interrupt-parent = <&gpio8>; - interrupts = <1 IRQ_TYPE_EDGE_RISING>; - pinctrl-names = "default"; - pinctrl-0 = <&comp_int>; - }; - - l3g4200d: l3g4200d@68 { - compatible = "st,l3g4200d-gyro"; - st,drdy-int-pin = <2>; - reg = <0x6b>; - }; - - mma8452: mma8452@1d { - compatible = "fsl,mma8452"; - reg = <0x1d>; - interrupt-parent = <&gpio8>; - interrupts = <0 IRQ_TYPE_EDGE_RISING>; - pinctrl-names = "default"; - pinctrl-0 = <&gsensor_int>; - }; -}; - -&i2c2 { - status = "okay"; -}; - -&i2c3 { - status = "okay"; -}; - -&i2c4 { - status = "okay"; -}; - -&i2c5 { - status = "okay"; -}; - -&io_domains { - audio-supply = <&vcca_33>; - bb-supply = <&vcc_io>; - dvp-supply = <&vcc18_dvp>; - flash0-supply = <&vcc_flash>; - flash1-supply = <&vcc_lan>; - gpio30-supply = <&vcc_io>; - gpio1830-supply = <&vcc_io>; - lcdc-supply = <&vcc_io>; - sdcard-supply = <&vccio_sd>; - wifi-supply = <&vccio_wl>; - status = "okay"; -}; - -&pinctrl { - ak8963 { - comp_int: comp-int { - rockchip,pins = <8 1 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - buttons { - pwrbtn: pwrbtn { - rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - dvp { - dvp_pwr: dvp-pwr { - rockchip,pins = <0 17 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - ir { - ir_int: ir-int { - rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - mma8452 { - gsensor_int: gsensor-int { - rockchip,pins = <8 0 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - pmic { - pmic_int: pmic-int { - rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - sdmmc { - sdmmc_pwr: sdmmc-pwr { - rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - usb_host { - host_vbus_drv: host-vbus-drv { - rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; -}; - -&saradc { - status = "okay"; -}; - -&tsadc { - rockchip,hw-tshut-mode = <0>; - rockchip,hw-tshut-polarity = <0>; - status = "okay"; -}; - -&vopb { - status = "okay"; -}; - -&vopb_mmu { - status = "okay"; -}; - -&vopl { - status = "okay"; -}; - -&vopl_mmu { - status = "okay"; -}; - -&uart0 { - status = "okay"; -}; - -&uart1 { - status = "okay"; -}; - -&uart2 { - status = "okay"; -}; - -&uart3 { - status = "okay"; -}; - -&uart4 { - status = "okay"; -}; - -&usb_host1 { - vbus-supply = <&vcc5v0_host>; - status = "okay"; -}; - -&usbphy { - status = "okay"; -}; diff --git a/arch/arm/dts/rk3288-rock-pi-n8.dts b/arch/arm/dts/rk3288-rock-pi-n8.dts deleted file mode 100644 index c9894a60e703..000000000000 --- a/arch/arm/dts/rk3288-rock-pi-n8.dts +++ /dev/null @@ -1,17 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd - * Copyright (c) 2019 Vamrs Limited - * Copyright (c) 2019 Amarula Solutions(India) - */ - -/dts-v1/; -#include "rk3288.dtsi" -#include <rockchip-radxa-dalang-carrier.dtsi> -#include "rk3288-vmarc-som.dtsi" - -/ { - model = "Radxa ROCK Pi N8"; - compatible = "radxa,rockpi-n8", "vamrs,rk3288-vmarc-som", - "rockchip,rk3288"; -}; diff --git a/arch/arm/dts/rk3288-rock2-som.dtsi b/arch/arm/dts/rk3288-rock2-som.dtsi deleted file mode 100644 index 58e32fbb80f6..000000000000 --- a/arch/arm/dts/rk3288-rock2-som.dtsi +++ /dev/null @@ -1,278 +0,0 @@ -/* - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -#include <dt-bindings/pwm/pwm.h> -#include "rk3288.dtsi" - -/ { - memory { - reg = <0x0 0x0 0x0 0x80000000>; - device_type = "memory"; - }; - - emmc_pwrseq: emmc-pwrseq { - compatible = "mmc-pwrseq-emmc"; - pinctrl-0 = <&emmc_reset>; - pinctrl-names = "default"; - reset-gpios = <&gpio3 9 GPIO_ACTIVE_LOW>; - }; - - ext_gmac: external-gmac-clock { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <125000000>; - clock-output-names = "ext_gmac"; - }; - - vcc_sys: vsys-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc_sys"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; - }; -}; - -&cpu0 { - cpu0-supply = <&vdd_cpu>; -}; - -&emmc { - bus-width = <8>; - cap-mmc-highspeed; - disable-wp; - non-removable; - num-slots = <1>; - mmc-pwrseq = <&emmc_pwrseq>; - pinctrl-names = "default"; - pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; - vmmc-supply = <&vcc_io>; - status = "okay"; -}; - -&gmac { - assigned-clocks = <&cru SCLK_MAC>; - assigned-clock-parents = <&ext_gmac>; - clock_in_out = "input"; - phy-mode = "rgmii"; - phy-supply = <&vccio_pmu>; - pinctrl-names = "default"; - pinctrl-0 = <&rgmii_pins &phy_rst>; - snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>; - snps,reset-active-low; - snps,reset-delays-us = <0 10000 30000>; - rx_delay = <0x10>; - tx_delay = <0x30>; -}; - -&i2c0 { - status = "okay"; - - act8846: act8846@5a { - compatible = "active-semi,act8846"; - reg = <0x5a>; - system-power-controller; - inl1-supply = <&vcc_io>; - inl2-supply = <&vcc_sys>; - inl3-supply = <&vcc_20>; - vp1-supply = <&vcc_sys>; - vp2-supply = <&vcc_sys>; - vp3-supply = <&vcc_sys>; - vp4-supply = <&vcc_sys>; - - regulators { - vcc_ddr: REG1 { - regulator-name = "VCC_DDR"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - }; - - vcc_io: REG2 { - regulator-name = "VCC_IO"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vdd_log: REG3 { - regulator-name = "VDD_LOG"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - vcc_20: REG4 { - regulator-name = "VCC_20"; - regulator-min-microvolt = <2000000>; - regulator-max-microvolt = <2000000>; - regulator-always-on; - }; - - vccio_sd: REG5 { - regulator-name = "VCCIO_SD"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vdd10_lcd: REG6 { - regulator-name = "VDD10_LCD"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - vcca_codec: REG7 { - regulator-name = "VCCA_CODEC"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vcca_tp: REG8 { - regulator-name = "VCCA_TP"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vccio_pmu: REG9 { - regulator-name = "VCCIO_PMU"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vdd_10: REG10 { - regulator-name = "VDD_10"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - vcc_18: REG11 { - regulator-name = "VCC_18"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - vcc18_lcd: REG12 { - regulator-name = "VCC18_LCD"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - }; - }; - - vdd_cpu: syr827@40 { - compatible = "silergy,syr827"; - reg = <0x40>; - fcs,suspend-voltage-selector = <1>; - regulator-always-on; - regulator-boot-on; - regulator-enable-ramp-delay = <300>; - regulator-name = "vdd_cpu"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <8000>; - vin-supply = <&vcc_sys>; - }; - - vdd_gpu: syr828@41 { - compatible = "silergy,syr828"; - reg = <0x41>; - fcs,suspend-voltage-selector = <1>; - regulator-always-on; - regulator-enable-ramp-delay = <300>; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1350000>; - regulator-name = "vdd_gpu"; - regulator-ramp-delay = <8000>; - vin-supply = <&vcc_sys>; - }; -}; - -&pinctrl { - pcfg_output_high: pcfg-output-high { - output-high; - }; - - emmc { - emmc_reset: emmc-reset { - rockchip,pins = <3 9 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - gmac { - phy_rst: phy-rst { - rockchip,pins = <4 8 RK_FUNC_GPIO &pcfg_output_high>; - }; - }; -}; - -&tsadc { - rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */ - rockchip,hw-tshut-polarity = <0>; /* tshut polarity 0:LOW 1:HIGH */ - status = "okay"; -}; - -&vopb { - status = "okay"; -}; - -&vopb_mmu { - status = "okay"; -}; - -&vopl { - status = "okay"; -}; - -&vopl_mmu { - status = "okay"; -}; - -&wdt { - status = "okay"; -}; diff --git a/arch/arm/dts/rk3288-rock2-square.dts b/arch/arm/dts/rk3288-rock2-square.dts deleted file mode 100644 index 41676696ba33..000000000000 --- a/arch/arm/dts/rk3288-rock2-square.dts +++ /dev/null @@ -1,181 +0,0 @@ -/* - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include "rk3288-rock2-som.dtsi" - -/ { - model = "Radxa Rock 2 Square"; - compatible = "radxa,rock2-square", "rockchip,rk3288"; - - chosen { - stdout-path = "serial2:115200n8"; - }; - - ir: ir-receiver { - compatible = "gpio-ir-receiver"; - gpios = <&gpio8 1 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&ir_int>; - }; - - sound { - compatible = "simple-audio-card"; - simple-audio-card,name = "SPDIF"; - simple-audio-card,dai-link@1 { /* S/PDIF - S/PDIF */ - cpu { sound-dai = <&spdif>; }; - codec { sound-dai = <&spdif_out>; }; - }; - }; - - spdif_out: spdif-out { - compatible = "linux,spdif-dit"; - #sound-dai-cells = <0>; - }; - - vcc_usb_host: vcc-host-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&host_vbus_drv>; - /* Always on as the rockchip usb phy doesn't have a vbus-supply - * property - */ - regulator-always-on; - regulator-name = "vcc_host"; - }; - - vcc_sd: sdmmc-regulator { - compatible = "regulator-fixed"; - gpio = <&gpio7 11 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc_pwr>; - regulator-name = "vcc_sd"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vcc_io>; - }; -}; - -&sdmmc { - bus-width = <4>; - cap-mmc-highspeed; - cap-sd-highspeed; - card-detect-delay = <200>; - disable-wp; /* wp not hooked up */ - num-slots = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; - vmmc-supply = <&vcc_sd>; - vqmmc-supply = <&vccio_sd>; - status = "okay"; -}; - -&gmac { - status = "okay"; -}; - -&hdmi { - ddc-i2c-bus = <&i2c5>; - status = "okay"; -}; - -&i2c0 { - hym8563@51 { - compatible = "haoyu,hym8563"; - reg = <0x51>; - #clock-cells = <0>; - clock-frequency = <32768>; - clock-output-names = "xin32k"; - interrupt-parent = <&gpio0>; - interrupts = <4 IRQ_TYPE_EDGE_FALLING>; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_int>; - - }; -}; - -&i2c5 { - status = "okay"; -}; - -&pinctrl { - ir { - ir_int: ir-int { - rockchip,pins = <8 1 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - pmic { - pmic_int: pmic-int { - rockchip,pins = <0 4 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - usb { - host_vbus_drv: host-vbus-drv { - rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - sdmmc { - sdmmc_pwr: sdmmc-pwr { - rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; -}; - -&spdif { - status = "okay"; -}; - -&uart2 { - status = "okay"; - reg-shift = <2>; -}; - -&usbphy { - status = "okay"; -}; - -&usb_host0_ehci { - status = "okay"; -}; diff --git a/arch/arm/dts/rk3288-tinker-s.dts b/arch/arm/dts/rk3288-tinker-s.dts deleted file mode 100644 index cc7ac5f8811c..000000000000 --- a/arch/arm/dts/rk3288-tinker-s.dts +++ /dev/null @@ -1,29 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. - */ - -/dts-v1/; - -#include "rk3288-tinker.dtsi" - -/ { - model = "Rockchip RK3288 Asus Tinker Board S"; - compatible = "asus,rk3288-tinker-s", "rockchip,rk3288"; - - chosen { - stdout-path = &uart2; - }; -}; - -&emmc { - bus-width = <8>; - cap-mmc-highspeed; - non-removable; - pinctrl-names = "default"; - pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>; - max-frequency = <150000000>; - mmc-hs200-1_8v; - mmc-ddr-1_8v; - status = "okay"; -}; diff --git a/arch/arm/dts/rk3288-tinker.dts b/arch/arm/dts/rk3288-tinker.dts deleted file mode 100644 index 8b1848c310ee..000000000000 --- a/arch/arm/dts/rk3288-tinker.dts +++ /dev/null @@ -1,33 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ OR X11 -/* - * (C) Copyright 2016 Rockchip Electronics Co., Ltd - */ - -/dts-v1/; -#include "rk3288-tinker.dtsi" - -/ { - model = "Tinker-RK3288"; - compatible = "rockchip,rk3288-tinker", "rockchip,rk3288"; - - chosen { - stdout-path = &uart2; - }; -}; - -&pinctrl { - usb { - host_vbus_drv: host-vbus-drv { - rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; -}; - -&pwm1 { - status = "okay"; -}; - -&usb_host1 { - vbus-supply = <&vcc5v0_host>; - status = "okay"; -}; diff --git a/arch/arm/dts/rk3288-tinker.dtsi b/arch/arm/dts/rk3288-tinker.dtsi deleted file mode 100644 index 62b4beb25100..000000000000 --- a/arch/arm/dts/rk3288-tinker.dtsi +++ /dev/null @@ -1,533 +0,0 @@ -/* - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -#include <dt-bindings/input/input.h> -#include "rk3288.dtsi" - -/ { - memory { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x80000000>; - }; - - ext_gmac: external-gmac-clock { - compatible = "fixed-clock"; - clock-frequency = <125000000>; - clock-output-names = "ext_gmac"; - #clock-cells = <0>; - }; - - gpio-keys { - compatible = "gpio-keys"; - autorepeat; - - pinctrl-names = "default"; - pinctrl-0 = <&pwrbtn>; - - button@0 { - gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; - label = "GPIO Key Power"; - linux,code = <KEY_POWER>; - linux,input-type = <1>; - gpio-key,wakeup = <1>; - debounce-interval = <100>; - }; - }; - - gpio-leds { - compatible = "gpio-leds"; - - pwr-led { - gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-on"; - }; - - act-led { - gpios=<&gpio2 3 GPIO_ACTIVE_LOW>; - linux,default-trigger="mmc0"; - }; - }; - - vcc_sys: vsys-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc_sys"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; - }; - - /* - * NOTE: vcc_sd isn't hooked up on v1.0 boards where power comes from - * vcc_io directly. Those boards won't be able to power cycle SD cards - * but it shouldn't hurt to toggle this pin there anyway. - */ - vcc_sd: sdmmc-regulator { - compatible = "regulator-fixed"; - gpio = <&gpio7 11 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc_pwr>; - regulator-name = "vcc_sd"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - startup-delay-us = <100000>; - vin-supply = <&vcc_io>; - }; - - vcc5v0_host: usb-host-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&host_vbus_drv>; - regulator-name = "vcc5v0_host"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; -}; - -&cpu0 { - cpu0-supply = <&vdd_cpu>; -}; - -&sdmmc { - bus-width = <4>; - cap-mmc-highspeed; - cap-sd-highspeed; - card-detect-delay = <200>; - disable-wp; /* wp not hooked up */ - num-slots = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; - status = "okay"; - supports-sd; - vmmc-supply = <&vcc_sd>; - vqmmc-supply = <&vccio_sd>; -}; - -&gpu { - mali-supply = <&vdd_gpu>; - status = "okay"; -}; - -&gmac { - phy-supply = <&vcc33_lan>; - phy-mode = "rgmii"; - clock_in_out = "input"; - snps,reset-gpio = <&gpio4 7 0>; - snps,reset-active-low; - snps,reset-delays-us = <0 10000 1000000>; - assigned-clocks = <&cru SCLK_MAC>; - assigned-clock-parents = <&ext_gmac>; - pinctrl-names = "default"; - pinctrl-0 = <&rgmii_pins>; - tx_delay = <0x30>; - rx_delay = <0x10>; - status = "okay"; -}; - -&hdmi { - ddc-i2c-bus = <&i2c5>; - status = "okay"; -}; - -&i2c0 { - status = "okay"; - clock-frequency = <400000>; - - rk808: pmic@1b { - compatible = "rockchip,rk808"; - reg = <0x1b>; - interrupt-parent = <&gpio0>; - interrupts = <4 IRQ_TYPE_LEVEL_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_int &global_pwroff>; - rockchip,system-power-controller; - wakeup-source; - #clock-cells = <1>; - clock-output-names = "xin32k", "rk808-clkout2"; - - vcc1-supply = <&vcc_sys>; - vcc2-supply = <&vcc_sys>; - vcc3-supply = <&vcc_sys>; - vcc4-supply = <&vcc_sys>; - vcc6-supply = <&vcc_sys>; - vcc7-supply = <&vcc_sys>; - vcc8-supply = <&vcc_18>; - vcc9-supply = <&vcc_io>; - vcc10-supply = <&vcc_io>; - vcc11-supply = <&vcc_sys>; - vcc12-supply = <&vcc_io>; - vddio-supply = <&vcc18_ldo1>; - - regulators { - vdd_cpu: DCDC_REG1 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1350000>; - regulator-name = "vdd_arm"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_gpu: DCDC_REG2 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1250000>; - regulator-name = "vdd_gpu"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1000000>; - }; - }; - - vcc_ddr: DCDC_REG3 { - regulator-always-on; - regulator-boot-on; - regulator-name = "vcc_ddr"; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vcc_io: DCDC_REG4 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc_io"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcc18_ldo1: LDO_REG1 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcc18_ldo1"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcc33_mipi: LDO_REG2 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc33_mipi"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_10: LDO_REG3 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-name = "vdd_10"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1000000>; - }; - }; - - vcc18_codec: LDO_REG4 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcc18_codec"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vccio_sd: LDO_REG5 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vccio_sd"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vdd10_lcd: LDO_REG6 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-name = "vdd10_lcd"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1000000>; - }; - }; - - vcc_18: LDO_REG7 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcc_18"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcc18_lcd: LDO_REG8 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcc18_lcd"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcc33_sd: SWITCH_REG1 { - regulator-always-on; - regulator-boot-on; - regulator-name = "vcc33_sd"; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vcc33_lan: SWITCH_REG2 { - regulator-always-on; - regulator-boot-on; - regulator-name = "vcc33_lan"; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - }; - }; -}; - -&i2c2 { - status = "okay"; - headset: nau8825@1a { - compatible = "nuvoton,nau8825"; - #sound-dai-cells = <0>; - reg = <0x1a>; - interrupt-parent = <&gpio6>; - interrupts = <5 IRQ_TYPE_LEVEL_LOW>; - nuvoton,jkdet-enable = <1>; - nuvoton,jkdet-pull-enable = <1>; - nuvoton,jkdet-pull-up = <0>; - nuvoton,jkdet-polarity = <1>; - nuvoton,vref-impedance = <2>; - nuvoton,micbias-voltage = <6>; - nuvoton,sar-threshold-num = <4>; - nuvoton,sar-threshold = <0xa 0x14 0x26 0x73>; - nuvoton,sar-hysteresis = <0>; - nuvoton,sar-voltage = <6>; - nuvoton,sar-compare-time = <0>; - nuvoton,sar-sampling-time = <0>; - nuvoton,short-key-debounce = <3>; - nuvoton,jack-insert-debounce = <7>; - nuvoton,jack-eject-debounce = <7>; - clock-names = "mclk"; - clocks = <&cru SCLK_I2S0_OUT>; - }; -}; - -&i2c5 { - status = "okay"; -}; - -&wdt { - status = "okay"; -}; - -&pwm0 { - status = "okay"; -}; - -&saradc { - vref-supply = <&vcc18_ldo1>; - status ="okay"; -}; - -&uart0 { - status = "okay"; -}; - -&uart1 { - status = "okay"; -}; - -&uart2 { - status = "okay"; -}; - -&uart3 { - status = "okay"; -}; - -&uart4 { - status = "okay"; -}; - -&tsadc { - rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */ - rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */ - status = "okay"; -}; - -&usbphy { - status = "okay"; -}; - -&usb_host0_ehci { - status = "okay"; -}; - -&usb_host1 { - status = "okay"; -}; - -&usb_otg { - status= "okay"; -}; - -&vopb { - status = "okay"; -}; - -&vopb_mmu { - status = "okay"; -}; - -&vopl { - status = "okay"; -}; - -&vopl_mmu { - status = "okay"; -}; - -&pinctrl { - pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma { - drive-strength = <8>; - }; - - pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma { - bias-pull-up; - drive-strength = <8>; - }; - - backlight { - bl_en: bl-en { - rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - buttons { - pwrbtn: pwrbtn { - rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - eth_phy { - eth_phy_pwr: eth-phy-pwr { - rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - pmic { - pmic_int: pmic-int { - rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - sdmmc { - /* - * Default drive strength isn't enough to achieve even - * high-speed mode on EVB board so bump up to 8ma. - */ - sdmmc_bus4: sdmmc-bus4 { - rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_8ma>, - <6 17 RK_FUNC_1 &pcfg_pull_up_drv_8ma>, - <6 18 RK_FUNC_1 &pcfg_pull_up_drv_8ma>, - <6 19 RK_FUNC_1 &pcfg_pull_up_drv_8ma>; - }; - - sdmmc_clk: sdmmc-clk { - rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_drv_8ma>; - }; - - sdmmc_cmd: sdmmc-cmd { - rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_8ma>; - }; - - sdmmc_pwr: sdmmc-pwr { - rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - usb { - host_vbus_drv: host-vbus-drv { - rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - pwr_3g: pwr-3g { - rockchip,pins = <7 8 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; -}; diff --git a/arch/arm/dts/rk3288-veyron-chromebook.dtsi b/arch/arm/dts/rk3288-veyron-chromebook.dtsi deleted file mode 100644 index 143eaae26db5..000000000000 --- a/arch/arm/dts/rk3288-veyron-chromebook.dtsi +++ /dev/null @@ -1,205 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Google Veyron (and derivatives) board device tree source - * - * Copyright 2014 Google, Inc - */ - -#include <dt-bindings/clock/rockchip,rk808.h> -#include <dt-bindings/input/input.h> -#include "rk3288-veyron.dtsi" - -/ { - aliases { - i2c20 = &i2c_tunnel; - video0 = &vopl; - video1 = &vopb; - }; - - gpio_keys: gpio-keys { - pinctrl-0 = <&pwr_key_h &ap_lid_int_l>; - lid { - label = "Lid"; - gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; - linux,code = <0>; /* SW_LID */ - linux,input-type = <5>; /* EV_SW */ - debounce-interval = <1>; - gpio-key,wakeup; - }; - }; - - gpio-charger { - compatible = "gpio-charger"; - gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&ac_present_ap>; - charger-type = "mains"; - }; - - /* A non-regulated voltage from power supply or battery */ - vccsys: vccsys { - compatible = "regulator-fixed"; - regulator-name = "vccsys"; - regulator-boot-on; - regulator-always-on; - }; - - vcc33_sys: vcc33-sys { - vin-supply = <&vccsys>; - }; - - vcc_5v: vcc-5v { - vin-supply = <&vccsys>; - }; - - /* This turns on vbus for host1 (dwc2) */ - vcc5_host1: vcc5-host1-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&host1_pwr_en>; - regulator-name = "vcc5_host1"; - regulator-always-on; - regulator-boot-on; - }; - - /* This turns on vbus for otg for host mode (dwc2) */ - vcc5v_otg: vcc5v-otg-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&usbotg_pwren_h>; - regulator-name = "vcc5_host2"; - regulator-always-on; - regulator-boot-on; - }; -}; - -&rk808 { - regulators { - vcc33_ccd: LDO_REG8 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc33_ccd"; - regulator-suspend-mem-disabled; - }; - }; -}; - -&spi0 { - status = "okay"; - spi-activate-delay = <100>; - spi-max-frequency = <3000000>; - spi-deactivate-delay = <200>; - - cros_ec: ec@0 { - compatible = "google,cros-ec-spi"; - spi-max-frequency = <3000000>; - interrupt-parent = <&gpio7>; - interrupts = <7 IRQ_TYPE_LEVEL_LOW>; - ec-interrupt = <&gpio7 7 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&ec_int>; - reg = <0>; - google,cros-ec-spi-pre-delay = <30>; - - i2c_tunnel: i2c-tunnel { - compatible = "google,cros-ec-i2c-tunnel"; - google,remote-bus = <0>; - #address-cells = <1>; - #size-cells = <0>; - }; - }; -}; - -&i2c4 { - trackpad@15 { - compatible = "elan,i2c_touchpad"; - interrupt-parent = <&gpio7>; - interrupts = <3 IRQ_TYPE_EDGE_FALLING>; - pinctrl-names = "default"; - pinctrl-0 = <&trackpad_int>; - reg = <0x15>; - vcc-supply = <&vcc33_io>; - wakeup-source; - }; -}; - -&pinctrl { - pinctrl-0 = < - /* Common for sleep and wake, but no owners */ - &ddr0_retention - &ddrio_pwroff - &global_pwroff - - /* Wake only */ - &suspend_l_wake - &bt_dev_wake_awake - >; - pinctrl-1 = < - /* Common for sleep and wake, but no owners */ - &ddr0_retention - &ddrio_pwroff - &global_pwroff - - /* Sleep only */ - &suspend_l_sleep - &bt_dev_wake_sleep - >; - - buttons { - ap_lid_int_l: ap-lid-int-l { - rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - charger { - ac_present_ap: ac-present-ap { - rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - cros-ec { - ec_int: ec-int { - rockchip,pins = <7 7 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - sdmmc { - sdmmc_wp_gpio: sdmmc-wp-gpio { - rockchip,pins = <7 10 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - suspend { - suspend_l_wake: suspend-l-wake { - rockchip,pins = <0 17 RK_FUNC_GPIO &pcfg_output_low>; - }; - - suspend_l_sleep: suspend-l-sleep { - rockchip,pins = <0 17 RK_FUNC_GPIO &pcfg_output_high>; - }; - }; - - trackpad { - trackpad_int: trackpad-int { - rockchip,pins = <7 3 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - usb-host { - host1_pwr_en: host1-pwr-en { - rockchip,pins = <0 11 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - usbotg_pwren_h: usbotg-pwren-h { - rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; -}; - -#include "cros-ec-keyboard.dtsi" diff --git a/arch/arm/dts/rk3288-veyron-jerry.dts b/arch/arm/dts/rk3288-veyron-jerry.dts deleted file mode 100644 index 40fee55c7507..000000000000 --- a/arch/arm/dts/rk3288-veyron-jerry.dts +++ /dev/null @@ -1,208 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Google Veyron Jerry Rev 3+ board device tree source - * - * Copyright 2014 Google, Inc - */ - -/dts-v1/; -#include "rk3288-veyron-chromebook.dtsi" -#include "cros-ec-sbs.dtsi" - -/ { - model = "Google Jerry"; - compatible = "google,veyron-jerry-rev7", "google,veyron-jerry-rev6", - "google,veyron-jerry-rev5", "google,veyron-jerry-rev4", - "google,veyron-jerry-rev3", "google,veyron-jerry", - "google,veyron", "rockchip,rk3288"; - - chosen { - stdout-path = &uart2; - }; - - panel_regulator: panel-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&lcd_enable_h>; - regulator-name = "panel_regulator"; - vin-supply = <&vcc33_sys>; - }; - - vcc18_lcd: vcc18-lcd { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&avdd_1v8_disp_en>; - regulator-name = "vcc18_lcd"; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc18_wl>; - }; - - backlight_regulator: backlight-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&bl_pwr_en>; - regulator-name = "backlight_regulator"; - vin-supply = <&vcc33_sys>; - startup-delay-us = <15000>; - }; - - sound { - compatible = "rockchip,audio-max98090-jerry"; - - cpu { - sound-dai = <&i2s 0>; - }; - - codec { - sound-dai = <&max98090 0>; - }; - }; -}; - -&gpio_keys { - power { - gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; - }; -}; - -&backlight { - power-supply = <&backlight_regulator>; -}; - -&panel { - power-supply= <&panel_regulator>; -}; - -&rk808 { - pinctrl-names = "default"; - pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>; - dvs-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>, - <&gpio7 15 GPIO_ACTIVE_HIGH>; - - regulators { - mic_vcc: LDO_REG2 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "mic_vcc"; - regulator-suspend-mem-disabled; - }; - }; -}; - -&sdmmc { - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio - &sdmmc_bus4>; - disable-wp; -}; - -&vcc_5v { - enable-active-high; - gpio = <&gpio7 21 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&drv_5v>; -}; - -&vcc50_hdmi { - enable-active-high; - gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc50_hdmi_en>; -}; - -&edp { - pinctrl-names = "default"; - pinctrl-0 = <&edp_hpd>; -}; - -&pinctrl { - backlight { - bl_pwr_en: bl_pwr_en { - rockchip,pins = <2 12 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - buck-5v { - drv_5v: drv-5v { - rockchip,pins = <7 21 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - emmc { - /* Make sure eMMC is not in reset */ - emmc_deassert_reset: emmc-deassert-reset { - rockchip,pins = <2 9 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - hdmi { - vcc50_hdmi_en: vcc50-hdmi-en { - rockchip,pins = <5 19 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - lcd { - lcd_enable_h: lcd-en { - rockchip,pins = <7 14 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - avdd_1v8_disp_en: avdd-1v8-disp-en { - rockchip,pins = <2 13 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - pmic { - dvs_1: dvs-1 { - rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_down>; - }; - - dvs_2: dvs-2 { - rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>; - }; - }; -}; - -&i2c4 { - status = "okay"; - - /* - * Trackpad pin control is shared between Elan and Synaptics devices - * so we have to pull it up to the bus level. - */ - pinctrl-names = "default"; - pinctrl-0 = <&i2c4_xfer &trackpad_int>; - - trackpad@15 { - compatible = "elan,i2c_touchpad"; - interrupt-parent = <&gpio7>; - interrupts = <3 IRQ_TYPE_EDGE_FALLING>; - /* - * Remove the inherited pinctrl settings to avoid clashing - * with bus-wide ones. - */ - /delete-property/pinctrl-names; - /delete-property/pinctrl-0; - reg = <0x15>; - vcc-supply = <&vcc33_io>; - wakeup-source; - }; - - trackpad@2c { - compatible = "hid-over-i2c"; - interrupt-parent = <&gpio7>; - interrupts = <3 IRQ_TYPE_EDGE_FALLING>; - reg = <0x2c>; - hid-descr-addr = <0x0020>; - vcc-supply = <&vcc33_io>; - wakeup-source; - }; -}; diff --git a/arch/arm/dts/rk3288-veyron-mickey.dts b/arch/arm/dts/rk3288-veyron-mickey.dts deleted file mode 100644 index 0521d9e0e9a2..000000000000 --- a/arch/arm/dts/rk3288-veyron-mickey.dts +++ /dev/null @@ -1,266 +0,0 @@ -/* - * Google Veyron Mickey Rev 0 board device tree source - * - * Copyright 2015 Google, Inc - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include "rk3288-veyron-chromebook.dtsi" - -/ { - model = "Google Mickey"; - compatible = "google,veyron-mickey-rev8", "google,veyron-mickey-rev7", - "google,veyron-mickey-rev6", "google,veyron-mickey-rev5", - "google,veyron-mickey-rev4", "google,veyron-mickey-rev3", - "google,veyron-mickey-rev2", "google,veyron-mickey-rev1", - "google,veyron-mickey-rev0", "google,veyron-mickey", - "google,veyron", "rockchip,rk3288"; - - vcc_5v: vcc-5v { - vin-supply = <&vcc33_sys>; - }; - - vcc33_io: vcc33_io { - compatible = "regulator-fixed"; - regulator-name = "vcc33_io"; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc33_sys>; - }; -}; - -&cpu_thermal { - /delete-node/ trips; - /delete-node/ cooling-maps; - - trips { - cpu_alert_almost_warm: cpu_alert_almost_warm { - temperature = <63000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "passive"; - }; - cpu_alert_warm: cpu_alert_warm { - temperature = <65000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "passive"; - }; - cpu_alert_almost_hot: cpu_alert_almost_hot { - temperature = <80000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "passive"; - }; - cpu_alert_hot: cpu_alert_hot { - temperature = <82000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "passive"; - }; - cpu_alert_hotter: cpu_alert_hotter { - temperature = <84000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "passive"; - }; - cpu_alert_very_hot: cpu_alert_very_hot { - temperature = <85000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "passive"; - }; - cpu_crit: cpu_crit { - temperature = <90000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "critical"; - }; - }; - - cooling-maps { - /* - * After 1st level, throttle the CPU down to as low as 1.4 GHz - * and don't let the GPU go faster than 400 MHz. Note that we - * won't throttle the GPU lower than 400 MHz due to CPU - * heat--we'll let the GPU do the rest itself. - */ - cpu_warm_limit_cpu { - trip = <&cpu_alert_warm>; - cooling-device = - <&cpu0 THERMAL_NO_LIMIT 4>; - }; - - /* - * Add some discrete steps to help throttling system deal - * with the fact that there are two passive cooling devices: - * the CPU and the GPU. - * - * - 1.2 GHz - 1.0 GHz (almost hot) - * - 800 MHz (hot) - * - 800 MHz - 696 MHz (hotter) - * - 696 MHz - min (very hot) - * - * Note: - * - 800 MHz appears to be a "sweet spot" for me. I can run - * some pretty serious workload here and be happy. - * - After 696 MHz we stop lowering voltage, so throttling - * past there is less effective. - */ - cpu_almost_hot_limit_cpu { - trip = <&cpu_alert_almost_hot>; - cooling-device = - <&cpu0 5 6>; - }; - cpu_hot_limit_cpu { - trip = <&cpu_alert_hot>; - cooling-device = - <&cpu0 7 7>; - }; - cpu_hotter_limit_cpu { - trip = <&cpu_alert_hotter>; - cooling-device = - <&cpu0 7 8>; - }; - cpu_very_hot_limit_cpu { - trip = <&cpu_alert_very_hot>; - cooling-device = - <&cpu0 8 THERMAL_NO_LIMIT>; - }; - }; -}; - -&emmc { - /delete-property/mmc-hs200-1_8v; -}; - -&i2c2 { - status = "disabled"; -}; - -&i2c4 { - status = "disabled"; -}; - -&i2s { - status = "okay"; - clock-names = "i2s_hclk", "i2s_clk", "i2s_clk_out"; - clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>, <&cru SCLK_I2S0_OUT>; -}; - -&rk808 { - pinctrl-names = "default"; - pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>; - dvs-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>, - <&gpio7 15 GPIO_ACTIVE_HIGH>; - - /delete-property/ vcc6-supply; - /delete-property/ vcc12-supply; - - vcc11-supply = <&vcc33_sys>; - - regulators { - /* vcc33_io is sourced directly from vcc33_sys */ - /delete-node/ LDO_REG1; - /delete-node/ LDO_REG7; - - /* This is not a pwren anymore, but the real power supply */ - vdd10_lcd: LDO_REG7 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-name = "vdd10_lcd"; - regulator-suspend-mem-disabled; - }; - - vcc18_lcd: LDO_REG8 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcc18_lcd"; - regulator-suspend-mem-disabled; - }; - }; -}; - -&pinctrl { - hdmi { - power_hdmi_on: power-hdmi-on { - rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - pmic { - dvs_1: dvs-1 { - rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_down>; - }; - - dvs_2: dvs-2 { - rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>; - }; - }; -}; - -&sdmmc { - status = "disabled"; -}; - -&sdio0 { - status = "disabled"; -}; - -&sdmmc { - status = "disabled"; -}; - -&spi0 { - status = "disabled"; -}; - -&usb_host0_ehci { - status = "disabled"; -}; - -&usb_host1 { - status = "disabled"; -}; - -&vcc50_hdmi { - enable-active-high; - gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&power_hdmi_on>; -}; diff --git a/arch/arm/dts/rk3288-veyron-minnie.dts b/arch/arm/dts/rk3288-veyron-minnie.dts deleted file mode 100644 index b56a3f4f51af..000000000000 --- a/arch/arm/dts/rk3288-veyron-minnie.dts +++ /dev/null @@ -1,302 +0,0 @@ -/* - * Google Veyron Minnie Rev 0+ board device tree source - * - * Copyright 2015 Google, Inc - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include "rk3288-veyron-chromebook.dtsi" - -/ { - model = "Google Minnie"; - compatible = "google,veyron-minnie-rev4", "google,veyron-minnie-rev3", - "google,veyron-minnie-rev2", "google,veyron-minnie-rev1", - "google,veyron-minnie-rev0", "google,veyron-minnie", - "google,veyron", "rockchip,rk3288"; - - backlight_regulator: backlight-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&bl_pwr_en>; - regulator-name = "backlight_regulator"; - vin-supply = <&vcc33_sys>; - startup-delay-us = <15000>; - }; - - panel_regulator: panel-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&lcd_enable_h>; - regulator-name = "panel_regulator"; - startup-delay-us = <100000>; - vin-supply = <&vcc33_sys>; - }; - - vcc18_lcd: vcc18-lcd { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&avdd_1v8_disp_en>; - regulator-name = "vcc18_lcd"; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc18_wl>; - }; - - sound { - compatible = "rockchip,audio-max98090-jerry"; - - cpu { - sound-dai = <&i2s 0>; - }; - - codec { - sound-dai = <&max98090 0>; - }; - }; -}; - -&backlight { - /* Minnie panel PWM must be >= 1%, so start non-zero brightness at 3 */ - brightness-levels = < - 0 3 4 5 6 7 - 8 9 10 11 12 13 14 15 - 16 17 18 19 20 21 22 23 - 24 25 26 27 28 29 30 31 - 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 - 48 49 50 51 52 53 54 55 - 56 57 58 59 60 61 62 63 - 64 65 66 67 68 69 70 71 - 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 - 88 89 90 91 92 93 94 95 - 96 97 98 99 100 101 102 103 - 104 105 106 107 108 109 110 111 - 112 113 114 115 116 117 118 119 - 120 121 122 123 124 125 126 127 - 128 129 130 131 132 133 134 135 - 136 137 138 139 140 141 142 143 - 144 145 146 147 148 149 150 151 - 152 153 154 155 156 157 158 159 - 160 161 162 163 164 165 166 167 - 168 169 170 171 172 173 174 175 - 176 177 178 179 180 181 182 183 - 184 185 186 187 188 189 190 191 - 192 193 194 195 196 197 198 199 - 200 201 202 203 204 205 206 207 - 208 209 210 211 212 213 214 215 - 216 217 218 219 220 221 222 223 - 224 225 226 227 228 229 230 231 - 232 233 234 235 236 237 238 239 - 240 241 242 243 244 245 246 247 - 248 249 250 251 252 253 254 255>; - power-supply = <&backlight_regulator>; -}; - -&emmc { - /delete-property/mmc-hs200-1_8v; -}; - -&gpio_keys { - pinctrl-0 = <&pwr_key_h &ap_lid_int_l &volum_down_l &volum_up_l>; - - volum_down { - label = "Volum_down"; - gpios = <&gpio5 11 GPIO_ACTIVE_LOW>; - linux,code = <KEY_VOLUMEDOWN>; - debounce-interval = <100>; - }; - - volum_up { - label = "Volum_up"; - gpios = <&gpio5 10 GPIO_ACTIVE_LOW>; - linux,code = <KEY_VOLUMEUP>; - debounce-interval = <100>; - }; -}; - -&i2c_tunnel { - battery: bq27500@55 { - compatible = "ti,bq27500"; - reg = <0x55>; - }; -}; - -&i2c3 { - status = "okay"; - - clock-frequency = <400000>; - i2c-scl-falling-time-ns = <50>; - i2c-scl-rising-time-ns = <300>; - - touchscreen@10 { - compatible = "elan,ekth3500"; - reg = <0x10>; - interrupt-parent = <&gpio2>; - interrupts = <14 IRQ_TYPE_EDGE_FALLING>; - pinctrl-names = "default"; - pinctrl-0 = <&touch_int &touch_rst>; - reset-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; - vcc33-supply = <&vcc33_touch>; - vccio-supply = <&vcc33_touch>; - }; -}; - -&panel { - compatible = "auo,b101ean01", "simple-panel"; - power-supply= <&panel_regulator>; -}; - -&rk808 { - pinctrl-names = "default"; - pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>; - - regulators { - vcc33_touch: LDO_REG2 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc33_touch"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc5v_touch: SWITCH_REG2 { - regulator-name = "vcc5v_touch"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - }; -}; - -&sdmmc { - disable-wp; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio - &sdmmc_bus4>; -}; - -&vcc_5v { - enable-active-high; - gpio = <&gpio7 21 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&drv_5v>; -}; - -&vcc50_hdmi { - enable-active-high; - gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc50_hdmi_en>; -}; - -&pinctrl { - backlight { - bl_pwr_en: bl_pwr_en { - rockchip,pins = <2 12 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - buck-5v { - drv_5v: drv-5v { - rockchip,pins = <7 21 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - buttons { - volum_down_l: volum-down-l { - rockchip,pins = <5 11 RK_FUNC_GPIO &pcfg_pull_up>; - }; - - volum_up_l: volum-up-l { - rockchip,pins = <5 10 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - hdmi { - vcc50_hdmi_en: vcc50-hdmi-en { - rockchip,pins = <5 19 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - lcd { - lcd_enable_h: lcd-en { - rockchip,pins = <7 14 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - avdd_1v8_disp_en: avdd-1v8-disp-en { - rockchip,pins = <2 13 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - pmic { - dvs_1: dvs-1 { - rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_down>; - }; - - dvs_2: dvs-2 { - rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>; - }; - }; - - prochot { - gpio_prochot: gpio-prochot { - rockchip,pins = <2 8 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - touchscreen { - touch_int: touch-int { - rockchip,pins = <2 14 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - touch_rst: touch-rst { - rockchip,pins = <2 15 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; -}; diff --git a/arch/arm/dts/rk3288-veyron-speedy.dts b/arch/arm/dts/rk3288-veyron-speedy.dts deleted file mode 100644 index 58c1fe96eea2..000000000000 --- a/arch/arm/dts/rk3288-veyron-speedy.dts +++ /dev/null @@ -1,143 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Google Veyron Speedy Rev 1+ board device tree source - * - * Copyright 2015 Google, Inc - */ - -/dts-v1/; -#include "rk3288-veyron-chromebook.dtsi" -#include "cros-ec-sbs.dtsi" -#include "rk3288-veyron-speedy-u-boot.dtsi" - -/ { - model = "Google Speedy"; - compatible = "google,veyron-speedy-rev9", "google,veyron-speedy-rev8", - "google,veyron-speedy-rev7", "google,veyron-speedy-rev6", - "google,veyron-speedy-rev5", "google,veyron-speedy-rev4", - "google,veyron-speedy-rev3", "google,veyron-speedy-rev2", - "google,veyron-speedy", "google,veyron", "rockchip,rk3288"; - - panel_regulator: panel-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio7 RK_PB6 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&lcd_enable_h>; - regulator-name = "panel_regulator"; - startup-delay-us = <100000>; - vin-supply = <&vcc33_sys>; - }; - - vcc18_lcd: vcc18-lcd { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&avdd_1v8_disp_en>; - regulator-name = "vcc18_lcd"; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc18_wl>; - }; - - backlight_regulator: backlight-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&bl_pwr_en>; - regulator-name = "backlight_regulator"; - vin-supply = <&vcc33_sys>; - startup-delay-us = <15000>; - }; -}; - -&backlight { - power-supply = <&backlight_regulator>; -}; - -&cpu_alert0 { - temperature = <65000>; -}; - -&cpu_alert1 { - temperature = <70000>; -}; - -&edp { - /delete-property/pinctrl-names; - /delete-property/pinctrl-0; - - force-hpd; -}; - -&panel { - power-supply = <&panel_regulator>; -}; - -&rk808 { - pinctrl-names = "default"; - pinctrl-0 = <&pmic_int_l>; -}; - -&sdmmc { - disable-wp; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio - &sdmmc_bus4>; -}; - -&vcc_5v { - enable-active-high; - gpio = <&gpio7 RK_PC5 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&drv_5v>; -}; - -&vcc50_hdmi { - enable-active-high; - gpio = <&gpio5 RK_PC3 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc50_hdmi_en>; -}; - -&pinctrl { - backlight { - bl_pwr_en: bl_pwr_en { - rockchip,pins = <2 12 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - buck-5v { - drv_5v: drv-5v { - rockchip,pins = <7 21 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - hdmi { - vcc50_hdmi_en: vcc50-hdmi-en { - rockchip,pins = <5 19 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - lcd { - lcd_enable_h: lcd-en { - rockchip,pins = <7 14 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - avdd_1v8_disp_en: avdd-1v8-disp-en { - rockchip,pins = <2 13 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - pmic { - dvs_1: dvs-1 { - rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_down>; - }; - - dvs_2: dvs-2 { - rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>; - }; - }; -}; diff --git a/arch/arm/dts/rk3288-veyron-u-boot.dtsi b/arch/arm/dts/rk3288-veyron-u-boot.dtsi index 4f9c59c67573..57338cbf92e8 100644 --- a/arch/arm/dts/rk3288-veyron-u-boot.dtsi +++ b/arch/arm/dts/rk3288-veyron-u-boot.dtsi @@ -65,6 +65,14 @@ &spi2 { bootph-all; + + /delete-node/ flash@0; + + spi_flash: flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + }; }; &spi_flash { diff --git a/arch/arm/dts/rk3288-veyron.dtsi b/arch/arm/dts/rk3288-veyron.dtsi deleted file mode 100644 index 99406151bf59..000000000000 --- a/arch/arm/dts/rk3288-veyron.dtsi +++ /dev/null @@ -1,795 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Google Veyron (and derivatives) board device tree source - * - * Copyright 2014 Google, Inc - */ - -#include <dt-bindings/clock/rockchip,rk808.h> -#include <dt-bindings/input/input.h> -#include "rk3288.dtsi" - -/ { - memory { - reg = <0x0 0x0 0x0 0x80000000>; - }; - - chosen { - stdout-path = &uart2; - }; - - firmware { - chromeos { - pinctrl-names = "default"; - pinctrl-0 = <&fw_wp_ap>; - write-protect-gpio = <&gpio7 6 GPIO_ACTIVE_LOW>; - }; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - brightness-levels = < - 0 1 2 3 4 5 6 7 - 8 9 10 11 12 13 14 15 - 16 17 18 19 20 21 22 23 - 24 25 26 27 28 29 30 31 - 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 - 48 49 50 51 52 53 54 55 - 56 57 58 59 60 61 62 63 - 64 65 66 67 68 69 70 71 - 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 - 88 89 90 91 92 93 94 95 - 96 97 98 99 100 101 102 103 - 104 105 106 107 108 109 110 111 - 112 113 114 115 116 117 118 119 - 120 121 122 123 124 125 126 127 - 128 129 130 131 132 133 134 135 - 136 137 138 139 140 141 142 143 - 144 145 146 147 148 149 150 151 - 152 153 154 155 156 157 158 159 - 160 161 162 163 164 165 166 167 - 168 169 170 171 172 173 174 175 - 176 177 178 179 180 181 182 183 - 184 185 186 187 188 189 190 191 - 192 193 194 195 196 197 198 199 - 200 201 202 203 204 205 206 207 - 208 209 210 211 212 213 214 215 - 216 217 218 219 220 221 222 223 - 224 225 226 227 228 229 230 231 - 232 233 234 235 236 237 238 239 - 240 241 242 243 244 245 246 247 - 248 249 250 251 252 253 254 255>; - default-brightness-level = <128>; - enable-gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>; - backlight-boot-off; - pinctrl-names = "default"; - pinctrl-0 = <&bl_en>; - pwms = <&pwm0 0 1000000 0>; - }; - - panel: panel { - compatible ="cnm,n116bgeea2","simple-panel"; - status = "okay"; - power-supply = <&vcc33_lcd>; - backlight = <&backlight>; - }; - - gpio_keys: gpio-keys { - compatible = "gpio-keys"; - - pinctrl-names = "default"; - pinctrl-0 = <&pwr_key_h>; - power { - label = "Power"; - gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>; - linux,code = <KEY_POWER>; - debounce-interval = <100>; - gpio-key,wakeup; - }; - }; - - gpio-restart { - compatible = "gpio-restart"; - gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&ap_warm_reset_h>; - priority = /bits/ 8 <200>; - }; - - emmc_pwrseq: emmc-pwrseq { - compatible = "mmc-pwrseq-emmc"; - pinctrl-0 = <&emmc_reset>; - pinctrl-names = "default"; - reset-gpios = <&gpio2 9 GPIO_ACTIVE_HIGH>; - }; - - sound { - compatible = "rockchip,rockchip-audio-max98090"; - rockchip,model = "ROCKCHIP-I2S"; - rockchip,i2s-controller = <&i2s>; - rockchip,audio-codec = <&max98090>; - rockchip,hp-det-gpios = <&gpio6 5 GPIO_ACTIVE_HIGH>; - rockchip,mic-det-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>; - rockchip,headset-codec = <&headsetcodec>; - pinctrl-names = "default"; - pinctrl-0 = <&mic_det>, <&hp_det>; - }; - - vdd_logic: pwm-regulator { - compatible = "pwm-regulator"; - pwms = <&pwm1 0 2000 0>; - - voltage-table = <1350000 0>, - <1300000 10>, - <1250000 20>, - <1200000 31>, - <1150000 41>, - <1100000 52>, - <1050000 62>, - <1000000 72>, - < 950000 83>; - - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1350000>; - regulator-name = "vdd_logic"; - regulator-ramp-delay = <4000>; - }; - - vcc33_sys: vcc33-sys { - compatible = "regulator-fixed"; - regulator-name = "vcc33_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vccsys>; - }; - - vcc_5v: vcc-5v { - compatible = "regulator-fixed"; - regulator-name = "vcc_5v"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - vcc50_hdmi: vcc50-hdmi { - compatible = "regulator-fixed"; - regulator-name = "vcc50_hdmi"; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc_5v>; - }; - - bt_regulator: bt-regulator { - /* - * On the module itself this is one of these (depending - * on the actual card pouplated): - * - BT_I2S_WS_BT_RFDISABLE_L - * - No connect - */ - - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&bt_enable_l>; - regulator-name = "bt_regulator"; - }; - - wifi_regulator: wifi-regulator { - /* - * On the module itself this is one of these (depending - * on the actual card populated): - * - SDIO_RESET_L_WL_REG_ON - * - PDN (power down when low) - */ - - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio4 28 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&wifi_enable_h>; - regulator-name = "wifi_regulator"; - - /* Faux input supply. See bt_regulator description. */ - vin-supply = <&bt_regulator>; - }; -}; - -&cpu0 { - cpu0-supply = <&vdd_cpu>; -}; - -&efuse { - status = "okay"; -}; - -&emmc { - broken-cd; - bus-width = <8>; - cap-mmc-highspeed; - mmc-hs200-1_8v; - mmc-pwrseq = <&emmc_pwrseq>; - disable-wp; - non-removable; - num-slots = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8 &emmc_pwr>; - status = "okay"; -}; - -&sdio0 { - broken-cd; - bus-width = <4>; - cap-sd-highspeed; - sd-uhs-sdr12; - sd-uhs-sdr25; - sd-uhs-sdr50; - sd-uhs-sdr104; - cap-sdio-irq; - card-external-vcc-supply = <&wifi_regulator>; - clocks = <&cru HCLK_SDIO0>, <&cru SCLK_SDIO0>, <&cru SCLK_SDIO0_DRV>, - <&cru SCLK_SDIO0_SAMPLE>, <&rk808 RK808_CLKOUT1>; - clock-names = "biu", "ciu", "ciu_drv", "ciu_sample", "card_ext_clock"; - keep-power-in-suspend; - non-removable; - num-slots = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&sdio0_clk &sdio0_cmd &sdio0_bus4>; - status = "okay"; - vmmc-supply = <&vcc33_sys>; - vqmmc-supply = <&vcc18_wl>; -}; - -&sdmmc { - bus-width = <4>; - cap-mmc-highspeed; - cap-sd-highspeed; - sd-uhs-sdr12; - sd-uhs-sdr25; - sd-uhs-sdr50; - sd-uhs-sdr104; - card-detect-delay = <200>; - cd-gpios = <&gpio7 5 GPIO_ACTIVE_LOW>; - num-slots = <1>; - status = "okay"; - vmmc-supply = <&vcc33_sd>; - vqmmc-supply = <&vccio_sd>; -}; - -&spi2 { - status = "okay"; - - spi_flash: spiflash@0 { - compatible = "spidev", "jedec,spi-nor"; - spi-max-frequency = <20000000>; /* Reduce for Dediprog em100 pro */ - reg = <0>; - }; -}; - -&i2c0 { - status = "okay"; - - clock-frequency = <400000>; - i2c-scl-falling-time-ns = <50>; /* 2.5ns measured */ - i2c-scl-rising-time-ns = <100>; /* 45ns measured */ - - rk808: pmic@1b { - compatible = "rockchip,rk808"; - clock-output-names = "xin32k", "wifibt_32kin"; - interrupt-parent = <&gpio0>; - interrupts = <4 IRQ_TYPE_LEVEL_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_int_l>; - reg = <0x1b>; - rockchip,system-power-controller; - wakeup-source; - #clock-cells = <1>; - - vcc1-supply = <&vcc33_sys>; - vcc2-supply = <&vcc33_sys>; - vcc3-supply = <&vcc33_sys>; - vcc4-supply = <&vcc33_sys>; - vcc6-supply = <&vcc_5v>; - vcc7-supply = <&vcc33_sys>; - vcc8-supply = <&vcc33_sys>; - vcc9-supply = <&vcc_5v>; - vcc10-supply = <&vcc33_sys>; - vcc11-supply = <&vcc_5v>; - vcc12-supply = <&vcc_18>; - - vddio-supply = <&vcc33_io>; - - regulators { - vdd_cpu: DCDC_REG1 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1450000>; - regulator-name = "vdd_arm"; - regulator-ramp-delay = <6001>; - regulator-suspend-mem-disabled; - }; - - vdd_gpu: DCDC_REG2 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1250000>; - regulator-name = "vdd_gpu"; - regulator-ramp-delay = <6001>; - regulator-suspend-mem-disabled; - }; - - vcc135_ddr: DCDC_REG3 { - regulator-always-on; - regulator-boot-on; - regulator-name = "vcc135_ddr"; - regulator-suspend-mem-enabled; - }; - - /* - * vcc_18 has several aliases. (vcc18_flashio and - * vcc18_wl). We'll add those aliases here just to - * make it easier to follow the schematic. The signals - * are actually hooked together and only separated for - * power measurement purposes). - */ - vcc18_wl: vcc18_flashio: vcc_18: DCDC_REG4 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcc_18"; - regulator-suspend-mem-microvolt = <1800000>; - }; - - /* - * Note that both vcc33_io and vcc33_pmuio are always - * powered together. To simplify the logic in the dts - * we just refer to vcc33_io every time something is - * powered from vcc33_pmuio. In fact, on later boards - * (such as danger) they're the same net. - */ - vcc33_io: LDO_REG1 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc33_io"; - regulator-suspend-mem-microvolt = <3300000>; - }; - - vdd_10: LDO_REG3 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-name = "vdd_10"; - regulator-suspend-mem-microvolt = <1000000>; - }; - - vccio_sd: LDO_REG4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vccio_sd"; - regulator-suspend-mem-disabled; - }; - - vcc33_sd: LDO_REG5 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc33_sd"; - regulator-suspend-mem-disabled; - }; - - vcc18_codec: LDO_REG6 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcc18_codec"; - regulator-suspend-mem-disabled; - }; - - vdd10_lcd_pwren_h: LDO_REG7 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - regulator-name = "vdd10_lcd_pwren_h"; - regulator-suspend-mem-disabled; - }; - - vcc33_lcd: SWITCH_REG1 { - regulator-always-on; - regulator-boot-on; - regulator-name = "vcc33_lcd"; - regulator-suspend-mem-disabled; - }; - }; - }; -}; - -&i2c1 { - status = "okay"; - - clock-frequency = <400000>; - i2c-scl-falling-time-ns = <50>; /* 2.5ns measured */ - i2c-scl-rising-time-ns = <100>; /* 40ns measured */ - - tpm: tpm@20 { - compatible = "infineon,slb9645tt"; - reg = <0x20>; - powered-while-suspended; - }; -}; - -&i2c2 { - status = "okay"; - - /* 100kHz since 4.7k resistors don't rise fast enough */ - clock-frequency = <100000>; - i2c-scl-falling-time-ns = <50>; /* 10ns measured */ - i2c-scl-rising-time-ns = <800>; /* 600ns measured */ - - max98090: max98090@10 { - compatible = "maxim,max98090"; - reg = <0x10>; - #sound-dai-cells = <0>; - interrupt-parent = <&gpio6>; - interrupts = <7 IRQ_TYPE_EDGE_FALLING>; - pinctrl-names = "default"; - pinctrl-0 = <&int_codec>; - }; -}; - -&i2c3 { - status = "okay"; - - clock-frequency = <400000>; - i2c-scl-falling-time-ns = <50>; - i2c-scl-rising-time-ns = <300>; -}; - -&i2c4 { - status = "okay"; - - clock-frequency = <400000>; - i2c-scl-falling-time-ns = <50>; /* 11ns measured */ - i2c-scl-rising-time-ns = <300>; /* 225ns measured */ - - headsetcodec: ts3a227e@3b { - compatible = "ti,ts3a227e"; - reg = <0x3b>; - interrupt-parent = <&gpio0>; - interrupts = <3 IRQ_TYPE_LEVEL_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&ts3a227e_int_l>; - ti,micbias = <7>; /* MICBIAS = 2.8V */ - }; -}; - -&i2c5 { - status = "okay"; - - clock-frequency = <100000>; - i2c-scl-falling-time-ns = <300>; - i2c-scl-rising-time-ns = <1000>; -}; - -&i2s { - status = "okay"; - clock-names = "i2s_hclk", "i2s_clk", "i2s_clk_out"; - clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>, <&cru SCLK_I2S0_OUT>; -}; - -&io_domains { - audio-supply = <&vcc18_codec>; - bb-supply = <&vcc33_io>; - dvp-supply = <&vcc_18>; - flash0-supply = <&vcc18_flashio>; - gpio1830-supply = <&vcc33_io>; - gpio30-supply = <&vcc33_io>; - lcdc-supply = <&vcc33_lcd>; - sdcard-supply = <&vccio_sd>; - wifi-supply = <&vcc18_wl>; - status = "okay"; -}; - -&wdt { - status = "okay"; -}; - -&pwm0 { - status = "okay"; -}; - -&pwm1 { - status = "okay"; -}; - -&uart0 { - status = "okay"; - - /* Pins don't include flow control by default; add that in */ - pinctrl-names = "default"; - pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; - /* We need to go faster than 24MHz, so adjust clock parents / rates */ - assigned-clocks = <&cru SCLK_UART0>; - assigned-clock-rates = <48000000>; -}; - -&uart1 { - status = "okay"; -}; - -&uart2 { - status = "okay"; - reg-shift = <2>; -}; - -&vopb { - status = "okay"; -}; - -&vopb_mmu { - status = "okay"; -}; - -&vopl { - status = "okay"; -}; - -&vopl_mmu { - status = "okay"; -}; - -&edp { - status = "okay"; - rockchip,panel = <&panel>; -}; - -&hdmi { - status = "okay"; -}; - -&gpu { - status = "okay"; -}; - -&tsadc { - tsadc-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */ - tsadc-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */ - status = "okay"; -}; - -&pinctrl { - pinctrl-names = "default", "sleep"; - pinctrl-0 = < - /* Common for sleep and wake, but no owners */ - &ddr0_retention - &ddrio_pwroff - &global_pwroff - - /* Wake only */ - &bt_dev_wake_awake - >; - pinctrl-1 = < - /* Common for sleep and wake, but no owners */ - &ddr0_retention - &ddrio_pwroff - &global_pwroff - - /* Sleep only */ - &bt_dev_wake_sleep - >; - - /* Add this for sdmmc pins to SD card */ - pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma { - drive-strength = <8>; - }; - - pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma { - bias-pull-up; - drive-strength = <8>; - }; - - pcfg_output_high: pcfg-output-high { - output-high; - }; - - pcfg_output_low: pcfg-output-low { - output-low; - }; - - backlight { - bl_en: bl-en { - rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - buttons { - pwr_key_h: pwr-key-h { - rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - codec { - hp_det: hp-det { - rockchip,pins = <6 5 RK_FUNC_GPIO &pcfg_pull_up>; - }; - int_codec: int-codec { - rockchip,pins = <6 7 RK_FUNC_GPIO &pcfg_pull_up>; - }; - mic_det: mic-det { - rockchip,pins = <6 11 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - emmc { - emmc_reset: emmc-reset { - rockchip,pins = <2 9 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - /* - * We run eMMC at max speed; bump up drive strength. - * We also have external pulls, so disable the internal ones. - */ - emmc_clk: emmc-clk { - rockchip,pins = <3 18 RK_FUNC_2 &pcfg_pull_none_drv_8ma>; - }; - - emmc_cmd: emmc-cmd { - rockchip,pins = <3 16 RK_FUNC_2 &pcfg_pull_none_drv_8ma>; - }; - - emmc_bus8: emmc-bus8 { - rockchip,pins = <3 0 RK_FUNC_2 &pcfg_pull_none_drv_8ma>, - <3 1 RK_FUNC_2 &pcfg_pull_none_drv_8ma>, - <3 2 RK_FUNC_2 &pcfg_pull_none_drv_8ma>, - <3 3 RK_FUNC_2 &pcfg_pull_none_drv_8ma>, - <3 4 RK_FUNC_2 &pcfg_pull_none_drv_8ma>, - <3 5 RK_FUNC_2 &pcfg_pull_none_drv_8ma>, - <3 6 RK_FUNC_2 &pcfg_pull_none_drv_8ma>, - <3 7 RK_FUNC_2 &pcfg_pull_none_drv_8ma>; - }; - }; - - headset { - ts3a227e_int_l: ts3a227e-int-l { - rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - pmic { - pmic_int_l: pmic-int-l { - /* - * Causes jerry to hang when probing bus 0 - * rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>; - */ - }; - }; - - reboot { - ap_warm_reset_h: ap-warm-reset-h { - rockchip,pins = <RK_GPIO0 13 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - sdio0 { - wifi_enable_h: wifienable-h { - rockchip,pins = <4 28 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - /* NOTE: mislabelled on schematic; should be bt_enable_h */ - bt_enable_l: bt-enable-l { - rockchip,pins = <4 29 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - /* - * We run sdio0 at max speed; bump up drive strength. - * We also have external pulls, so disable the internal ones. - */ - sdio0_bus4: sdio0-bus4 { - rockchip,pins = <4 20 RK_FUNC_1 &pcfg_pull_none_drv_8ma>, - <4 21 RK_FUNC_1 &pcfg_pull_none_drv_8ma>, - <4 22 RK_FUNC_1 &pcfg_pull_none_drv_8ma>, - <4 23 RK_FUNC_1 &pcfg_pull_none_drv_8ma>; - }; - - sdio0_cmd: sdio0-cmd { - rockchip,pins = <4 24 RK_FUNC_1 &pcfg_pull_none_drv_8ma>; - }; - - sdio0_clk: sdio0-clk { - rockchip,pins = <4 25 RK_FUNC_1 &pcfg_pull_none_drv_8ma>; - }; - - /* - * These pins are only present on very new veyron boards; on - * older boards bt_dev_wake is simply always high. Note that - * gpio4_26 is a NC on old veyron boards, so it doesn't hurt - * to map this pin everywhere - */ - bt_dev_wake_sleep: bt-dev-wake-sleep { - rockchip,pins = <4 26 RK_FUNC_GPIO &pcfg_output_low>; - }; - - bt_dev_wake_awake: bt-dev-wake-awake { - rockchip,pins = <4 26 RK_FUNC_GPIO &pcfg_output_high>; - }; - }; - - sdmmc { - /* - * We run sdmmc at max speed; bump up drive strength. - * We also have external pulls, so disable the internal ones. - */ - sdmmc_bus4: sdmmc-bus4 { - rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_none_drv_8ma>, - <6 17 RK_FUNC_1 &pcfg_pull_none_drv_8ma>, - <6 18 RK_FUNC_1 &pcfg_pull_none_drv_8ma>, - <6 19 RK_FUNC_1 &pcfg_pull_none_drv_8ma>; - }; - - sdmmc_clk: sdmmc-clk { - rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_drv_8ma>; - }; - - sdmmc_cmd: sdmmc-cmd { - rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_none_drv_8ma>; - }; - - /* - * Builtin CD line is hooked to ground to prevent JTAG at boot - * (and also to get the voltage rail correct). Make we - * configure gpio6_C6 as GPIO so dw_mmc builtin CD doesn't - * think there's a card inserted - */ - sdmmc_cd_disabled: sdmmc-cd-disabled { - rockchip,pins = <6 22 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - /* This is where we actually hook up CD */ - sdmmc_cd_gpio: sdmmc-cd-gpio { - rockchip,pins = <7 5 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - tpm { - tpm_int_h: tpm-int-h { - rockchip,pins = <7 4 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - write-protect { - fw_wp_ap: fw-wp-ap { - rockchip,pins = <7 6 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; -}; - -&usbphy { - status = "okay"; -}; - -&usb_host0_ehci { - status = "okay"; - needs-reset-on-resume; -}; - -&usb_host1 { - status = "okay"; -}; - -&usb_otg { - dr_mode = "host"; - status = "okay"; - assigned-clocks = <&cru SCLK_USBPHY480M_SRC>; - assigned-clock-parents = <&cru SCLK_OTGPHY0>; -}; diff --git a/arch/arm/dts/rk3288-vmarc-som.dtsi b/arch/arm/dts/rk3288-vmarc-som.dtsi deleted file mode 100644 index 793951655b73..000000000000 --- a/arch/arm/dts/rk3288-vmarc-som.dtsi +++ /dev/null @@ -1,361 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd - * Copyright (c) 2019 Vamrs Limited - * Copyright (c) 2019 Amarula Solutions(India) - */ - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/pinctrl/rockchip.h> - -/ { - compatible = "vamrs,rk3288-vmarc-som", "rockchip,rk3288"; - - vccio_flash: vccio-flash-regulator { - compatible = "regulator-fixed"; - regulator-name = "vccio_flash"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc_io>; - }; -}; - -&emmc { - bus-width = <8>; - cap-mmc-highspeed; - disable-wp; - non-removable; - pinctrl-names = "default"; - pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>; - vmmc-supply = <&vcc_io>; - vqmmc-supply = <&vccio_flash>; - status = "okay"; -}; - -&gmac { - assigned-clocks = <&cru SCLK_MAC>; - phy-supply = <&vcc_io>; - snps,reset-gpio = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>; -}; - -&hdmi { - ddc-i2c-bus = <&i2c5>; - pinctrl-names = "default"; - pinctrl-0 = <&hdmi_cec_c0>; -}; - -&i2c0 { - clock-frequency = <400000>; - status = "okay"; - - rk808: pmic@1b { - compatible = "rockchip,rk808"; - reg = <0x1b>; - interrupt-parent = <&gpio0>; - interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_int &global_pwroff>; - rockchip,system-power-controller; - wakeup-source; - #clock-cells = <1>; - clock-output-names = "rk808-clkout1", "rk808-clkout2"; - - vcc1-supply = <&vcc5v0_sys>; - vcc2-supply = <&vcc5v0_sys>; - vcc3-supply = <&vcc5v0_sys>; - vcc4-supply = <&vcc5v0_sys>; - vcc6-supply = <&vcc5v0_sys>; - vcc7-supply = <&vcc5v0_sys>; - vcc8-supply = <&vcc_io>; - vcc9-supply = <&vcc_io>; - vcc10-supply = <&vcc5v0_sys>; - vcc11-supply = <&vcc5v0_sys>; - vcc12-supply = <&vcc_io>; - vddio-supply = <&vcc_io>; - - regulators { - vdd_cpu: DCDC_REG1 { - regulator-name = "vdd_arm"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1400000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_gpu: DCDC_REG2 { - regulator-name = "vdd_gpu"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1250000>; - regulator-ramp-delay = <6000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_ddr: DCDC_REG3 { - regulator-name = "vcc_ddr"; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vcc_io: DCDC_REG4 { - regulator-name = "vcc_io"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcc_tp: LDO_REG1 { - regulator-name = "vcc_tp"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcca_codec: LDO_REG2 { - regulator-name = "vcca_codec"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vdd_10: LDO_REG3 { - regulator-name = "vdd_10"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1000000>; - }; - }; - - vcc_wl: LDO_REG4 { - regulator-name = "vcc_wl"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vccio_sd: LDO_REG5 { - regulator-name = "vccio_sd"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vdd10_lcd: LDO_REG6 { - regulator-name = "vdd10_lcd"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_18: LDO_REG7 { - regulator-name = "vcc_18"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcc18_lcd: LDO_REG8 { - regulator-name = "vcc18_lcd"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_sd: SWITCH_REG1 { - regulator-name = "vcc_sd"; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_lcd: SWITCH_REG2 { - regulator-name = "vcc_lcd"; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - }; - }; -}; - -&i2c1 { - clock-frequency = <400000>; - status = "okay"; - - hym8563: rtc@51 { - compatible = "haoyu,hym8563"; - reg = <0x51>; - interrupt-parent = <&gpio5>; - interrupts = <RK_PC3 IRQ_TYPE_LEVEL_LOW>; - #clock-cells = <0>; - clock-output-names = "hym8563"; - pinctrl-names = "default"; - pinctrl-0 = <&hym8563_int>; - }; -}; - -&i2c5 { - status = "okay"; -}; - -&io_domains { - bb-supply = <&vcc_io>; - flash0-supply = <&vccio_flash>; - gpio1830-supply = <&vcc_18>; - gpio30-supply = <&vcc_io>; - sdcard-supply = <&vccio_sd>; - wifi-supply = <&vcc_wl>; - status = "okay"; -}; - -&pinctrl { - hym8563 { - hym8563_int: hym8563-int { - rockchip,pins = <5 RK_PC3 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma { - drive-strength = <8>; - }; - - pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma { - bias-pull-up; - drive-strength = <8>; - }; - - pmic { - pmic_int: pmic-int { - rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - sdio-pwrseq { - wifi_enable_h: wifi-enable-h { - rockchip,pins = <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - sdmmc { - sdmmc_bus4: sdmmc-bus4 { - rockchip,pins = - <6 RK_PC0 1 &pcfg_pull_up_drv_8ma>, - <6 RK_PC1 1 &pcfg_pull_up_drv_8ma>, - <6 RK_PC2 1 &pcfg_pull_up_drv_8ma>, - <6 RK_PC3 1 &pcfg_pull_up_drv_8ma>; - }; - - sdmmc_clk: sdmmc-clk { - rockchip,pins = <6 RK_PC4 1 &pcfg_pull_none_drv_8ma>; - }; - - sdmmc_cmd: sdmmc-cmd { - rockchip,pins = <6 RK_PC5 1 &pcfg_pull_up_drv_8ma>; - }; - }; - - vbus_host { - usb1_en_oc: usb1-en-oc { - rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - vbus_typec { - usb0_en_oc: usb0-en-oc { - rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; -}; - -&sdio_pwrseq { - /* - * On the module itself this is one of these (depending - * on the actual card populated): - * - SDIO_RESET_L_WL_REG_ON - * - PDN (power down when low) - */ - reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>; /* WIFI_REG_ON */ -}; - -&usbphy { - status = "okay"; -}; - -&usb_host0_ehci { - status = "okay"; -}; - -&usb_host0_ohci { - status = "okay"; -}; - -&usb_host1 { - status = "okay"; -}; - -&usb_otg { - status = "okay"; -}; - -&vbus_host { - enable-active-high; - gpio = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>; /* USB1_EN_OC# */ -}; - -&vbus_typec { - enable-active-high; - gpio = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>; /* USB0_EN_OC# */ -}; diff --git a/arch/arm/dts/rk3288-vyasa.dts b/arch/arm/dts/rk3288-vyasa.dts deleted file mode 100644 index 4193f7208cd0..000000000000 --- a/arch/arm/dts/rk3288-vyasa.dts +++ /dev/null @@ -1,473 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (C) 2017 Jagan Teki <jagan(a)amarulasolutions.com> - */ - -/dts-v1/; -#include "rk3288.dtsi" - -/ { - model = "Amarula Vyasa-RK3288"; - compatible = "amarula,vyasa-rk3288", "rockchip,rk3288"; - - chosen { - stdout-path = &uart2; - }; - - memory { - reg = <0x0 0x0 0x0 0x80000000>; - device_type = "memory"; - }; - - dc12_vbat: dc12-vbat { - compatible = "regulator-fixed"; - regulator-name = "dc12_vbat"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - regulator-always-on; - regulator-boot-on; - }; - - vboot_3v3: vboot-3v3 { - compatible = "regulator-fixed"; - regulator-name = "vboot_3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&dc12_vbat>; - }; - - vcc_sys: vsys-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc_sys"; - regulator-min-microvolt = <3700000>; - regulator-max-microvolt = <3700000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&dc12_vbat>; - }; - - vboot_5v: vboot-5v { - compatible = "regulator-fixed"; - regulator-name = "vboot_sv"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&dc12_vbat>; - }; - - v3g_3v3: v3g-3v3 { - compatible = "regulator-fixed"; - regulator-name = "v3g_3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&dc12_vbat>; - }; - - vsus_5v: vsus-5v { - compatible = "regulator-fixed"; - regulator-name = "vsus_5v"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc_io>; - }; - - vcc50_hdmi: vcc50-hdmi { - compatible = "regulator-fixed"; - regulator-name = "vcc50_hdmi"; - enable-active-high; - gpio = <&gpio7 RK_PB4 GPIO_ACTIVE_HIGH>; /* HDMI_EN */ - pinctrl-names = "default"; - pinctrl-0 = <&vcc50_hdmi_en>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vsus_5v>; - }; - vusb1_5v: vusb1-5v { - compatible = "regulator-fixed"; - regulator-name = "vusb1_5v"; - enable-active-high; - gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; /* OTG_VBUS_DRV */ - pinctrl-names = "default"; - pinctrl-0 = <&otg_vbus_drv>; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vsus_5v>; - }; - - vusb2_5v: vusb2-5v { - compatible = "regulator-fixed"; - regulator-name = "vusb2_5v"; - enable-active-high; - gpio = <&gpio8 RK_PB1 GPIO_ACTIVE_HIGH>; /* USB2_PWR_EN */ - pinctrl-names = "default"; - pinctrl-0 = <&usb2_pwr_en>; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vsus_5v>; - }; - - ext_gmac: external-gmac-clock { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <125000000>; - clock-output-names = "ext_gmac"; - }; -}; - -&cpu0 { - cpu0-supply = <&vdd_cpu>; -}; - -&emmc { - bus-width = <8>; - cap-mmc-highspeed; - non-removable; - pinctrl-names = "default"; - pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>; - vmmc-supply = <&vcc_io>; - status = "okay"; -}; - -&gmac { - assigned-clocks = <&cru SCLK_MAC>; - assigned-clock-parents = <&ext_gmac>; - clock_in_out = "input"; - pinctrl-names = "default"; - pinctrl-0 = <&rgmii_pins>, <&phy_rst>, <&phy_pmeb>, <&phy_int>; - phy-supply = <&vcc_lan>; - phy-mode = "rgmii"; - snps,reset-active-low; - snps,reset-delays-us = <0 10000 1000000>; - snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>; - tx_delay = <0x30>; - rx_delay = <0x10>; - status = "okay"; -}; - -&gpu { - mali-supply = <&vdd_gpu>; - status = "okay"; -}; - -&hdmi { - ddc-i2c-bus = <&i2c5>; - status = "okay"; -}; - -&i2c0 { - clock-frequency = <400000>; - status = "okay"; - - rk808: pmic@1b { - compatible = "rockchip,rk808"; - reg = <0x1b>; - interrupt-parent = <&gpio0>; - interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>; - #clock-cells = <1>; - clock-output-names = "xin32k", "rk808-clkout2"; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_int &global_pwroff>; - rockchip,system-power-controller; - wakeup-source; - - vcc1-supply = <&vcc_sys>; - vcc2-supply = <&vcc_sys>; - vcc3-supply = <&vcc_sys>; - vcc4-supply = <&vcc_sys>; - vcc6-supply = <&vcc_sys>; - vcc7-supply = <&vcc_sys>; - vcc8-supply = <&vcc_io>; - vcc9-supply = <&vcc_sys>; - vcc10-supply = <&vcc_sys>; - vcc11-supply = <&vcc_sys>; - vcc12-supply = <&vcc_io>; - - regulators { - vdd_cpu: DCDC_REG1 { - regulator-name = "vdd_arm"; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_gpu: DCDC_REG2 { - regulator-name = "vdd_gpu"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1250000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1000000>; - }; - }; - - vcc_ddr: DCDC_REG3 { - regulator-name = "vcc_ddr"; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vcc_io: DCDC_REG4 { - regulator-name = "vcc_io"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcca_tp: LDO_REG1 { - regulator-name = "vcc_tp"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcc_codec: LDO_REG2 { - regulator-name = "vcc_codec"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_10: LDO_REG3 { - regulator-name = "vdd_10"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1000000>; - }; - }; - - vcc_gps: LDO_REG4 { - regulator-name = "vcc_gps"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vccio_sd: LDO_REG5 { - regulator-name = "vccio_sd"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vdd10_lcd: LDO_REG6 { - regulator-name = "vdd10_lcd"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1000000>; - }; - }; - - vcc_18: LDO_REG7 { - regulator-name = "vcc_18"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcc18_lcd: LDO_REG8 { - regulator-name = "vcc18_lcd"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcc_sd: SWITCH_REG1 { - regulator-name = "vcc_sd"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vcc_lan: SWITCH_REG2 { - regulator-name = "vcc_lan"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - }; - }; -}; - -&i2c5 { - status = "okay"; -}; - -&sdmmc { - bus-width = <4>; - cap-mmc-highspeed; - cap-sd-highspeed; - card-detect-delay = <200>; - disable-wp; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>; - vmmc-supply = <&vcc_sd>; - vqmmc-supply = <&vccio_sd>; - status = "okay"; -}; - -&tsadc { - rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */ - rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */ - status = "okay"; -}; - -&uart2 { - status = "okay"; -}; - -&usbphy { - status = "okay"; -}; - -&usb_host0_ehci { - status = "okay"; -}; - -&usb_host1 { - pinctrl-names = "default"; - pinctrl-0 = <&phy_pwr_en>; - status = "okay"; -}; - -&usb_otg { - status = "okay"; -}; - -&vopb { - status = "okay"; -}; - -&vopb_mmu { - status = "okay"; -}; - -&vopl { - status = "okay"; -}; - -&vopl_mmu { - status = "okay"; -}; - -&wdt { - status = "okay"; -}; - -&pinctrl { - pcfg_output_high: pcfg-output-high { - output-high; - }; - - gmac { - phy_int: phy-int { - rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>; - }; - - phy_pmeb: phy-pmeb { - rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>; - }; - - phy_rst: phy-rst { - rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_output_high>; - }; - }; - - hdmi { - vcc50_hdmi_en: vcc50-hdmi-en { - rockchip,pins = <7 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - pmic { - pmic_int: pmic-int { - rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - usb_host { - phy_pwr_en: phy-pwr-en { - rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_output_high>; - }; - - usb2_pwr_en: usb2-pwr-en { - rockchip,pins = <8 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - usb_otg { - otg_vbus_drv: otg-vbus-drv { - rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; - - }; - }; -}; diff --git a/arch/arm/dts/rk3288.dtsi b/arch/arm/dts/rk3288.dtsi deleted file mode 100644 index ead343dc3df1..000000000000 --- a/arch/arm/dts/rk3288.dtsi +++ /dev/null @@ -1,2035 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/pinctrl/rockchip.h> -#include <dt-bindings/clock/rk3288-cru.h> -#include <dt-bindings/power/rk3288-power.h> -#include <dt-bindings/thermal/thermal.h> -#include <dt-bindings/soc/rockchip,boot-mode.h> - -/ { - #address-cells = <2>; - #size-cells = <2>; - - compatible = "rockchip,rk3288"; - - interrupt-parent = <&gic>; - - aliases { - ethernet0 = &gmac; - gpio0 = &gpio0; - gpio1 = &gpio1; - gpio2 = &gpio2; - gpio3 = &gpio3; - gpio4 = &gpio4; - gpio5 = &gpio5; - gpio6 = &gpio6; - gpio7 = &gpio7; - gpio8 = &gpio8; - i2c0 = &i2c0; - i2c1 = &i2c1; - i2c2 = &i2c2; - i2c3 = &i2c3; - i2c4 = &i2c4; - i2c5 = &i2c5; - mshc0 = &emmc; - mshc1 = &sdmmc; - mshc2 = &sdio0; - mshc3 = &sdio1; - serial0 = &uart0; - serial1 = &uart1; - serial2 = &uart2; - serial3 = &uart3; - serial4 = &uart4; - spi0 = &spi0; - spi1 = &spi1; - spi2 = &spi2; - }; - - arm-pmu { - compatible = "arm,cortex-a12-pmu"; - interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; - interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - enable-method = "rockchip,rk3066-smp"; - rockchip,pmu = <&pmu>; - - cpu0: cpu@500 { - device_type = "cpu"; - compatible = "arm,cortex-a12"; - reg = <0x500>; - resets = <&cru SRST_CORE0>; - operating-points-v2 = <&cpu_opp_table>; - #cooling-cells = <2>; /* min followed by max */ - clock-latency = <40000>; - clocks = <&cru ARMCLK>; - dynamic-power-coefficient = <370>; - }; - cpu1: cpu@501 { - device_type = "cpu"; - compatible = "arm,cortex-a12"; - reg = <0x501>; - resets = <&cru SRST_CORE1>; - operating-points-v2 = <&cpu_opp_table>; - #cooling-cells = <2>; /* min followed by max */ - clock-latency = <40000>; - clocks = <&cru ARMCLK>; - dynamic-power-coefficient = <370>; - }; - cpu2: cpu@502 { - device_type = "cpu"; - compatible = "arm,cortex-a12"; - reg = <0x502>; - resets = <&cru SRST_CORE2>; - operating-points-v2 = <&cpu_opp_table>; - #cooling-cells = <2>; /* min followed by max */ - clock-latency = <40000>; - clocks = <&cru ARMCLK>; - dynamic-power-coefficient = <370>; - }; - cpu3: cpu@503 { - device_type = "cpu"; - compatible = "arm,cortex-a12"; - reg = <0x503>; - resets = <&cru SRST_CORE3>; - operating-points-v2 = <&cpu_opp_table>; - #cooling-cells = <2>; /* min followed by max */ - clock-latency = <40000>; - clocks = <&cru ARMCLK>; - dynamic-power-coefficient = <370>; - }; - }; - - cpu_opp_table: opp-table-0 { - compatible = "operating-points-v2"; - opp-shared; - - opp-126000000 { - opp-hz = /bits/ 64 <126000000>; - opp-microvolt = <900000>; - }; - opp-216000000 { - opp-hz = /bits/ 64 <216000000>; - opp-microvolt = <900000>; - }; - opp-312000000 { - opp-hz = /bits/ 64 <312000000>; - opp-microvolt = <900000>; - }; - opp-408000000 { - opp-hz = /bits/ 64 <408000000>; - opp-microvolt = <900000>; - }; - opp-600000000 { - opp-hz = /bits/ 64 <600000000>; - opp-microvolt = <900000>; - }; - opp-696000000 { - opp-hz = /bits/ 64 <696000000>; - opp-microvolt = <950000>; - }; - opp-816000000 { - opp-hz = /bits/ 64 <816000000>; - opp-microvolt = <1000000>; - }; - opp-1008000000 { - opp-hz = /bits/ 64 <1008000000>; - opp-microvolt = <1050000>; - }; - opp-1200000000 { - opp-hz = /bits/ 64 <1200000000>; - opp-microvolt = <1100000>; - }; - opp-1416000000 { - opp-hz = /bits/ 64 <1416000000>; - opp-microvolt = <1200000>; - }; - opp-1512000000 { - opp-hz = /bits/ 64 <1512000000>; - opp-microvolt = <1300000>; - }; - opp-1608000000 { - opp-hz = /bits/ 64 <1608000000>; - opp-microvolt = <1350000>; - }; - }; - - reserved-memory { - #address-cells = <2>; - #size-cells = <2>; - ranges; - - /* - * The rk3288 cannot use the memory area above 0xfe000000 - * for dma operations for some reason. While there is - * probably a better solution available somewhere, we - * haven't found it yet and while devices with 2GB of ram - * are not affected, this issue prevents 4GB from booting. - * So to make these devices at least bootable, block - * this area for the time being until the real solution - * is found. - */ - dma-unusable@fe000000 { - reg = <0x0 0xfe000000 0x0 0x1000000>; - }; - }; - - xin24m: oscillator { - compatible = "fixed-clock"; - clock-frequency = <24000000>; - clock-output-names = "xin24m"; - #clock-cells = <0>; - }; - - timer { - compatible = "arm,armv7-timer"; - arm,cpu-registers-not-fw-configured; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, - <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, - <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, - <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; - clock-frequency = <24000000>; - arm,no-tick-in-suspend; - }; - - timer: timer@ff810000 { - compatible = "rockchip,rk3288-timer"; - reg = <0x0 0xff810000 0x0 0x20>; - interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru PCLK_TIMER>, <&xin24m>; - clock-names = "pclk", "timer"; - }; - - display-subsystem { - compatible = "rockchip,display-subsystem"; - ports = <&vopl_out>, <&vopb_out>; - }; - - sdmmc: mmc@ff0c0000 { - compatible = "rockchip,rk3288-dw-mshc"; - max-frequency = <150000000>; - clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>, - <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>; - clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; - fifo-depth = <0x100>; - interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0xff0c0000 0x0 0x4000>; - resets = <&cru SRST_MMC0>; - reset-names = "reset"; - status = "disabled"; - }; - - sdio0: mmc@ff0d0000 { - compatible = "rockchip,rk3288-dw-mshc"; - max-frequency = <150000000>; - clocks = <&cru HCLK_SDIO0>, <&cru SCLK_SDIO0>, - <&cru SCLK_SDIO0_DRV>, <&cru SCLK_SDIO0_SAMPLE>; - clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; - fifo-depth = <0x100>; - interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0xff0d0000 0x0 0x4000>; - resets = <&cru SRST_SDIO0>; - reset-names = "reset"; - status = "disabled"; - }; - - sdio1: mmc@ff0e0000 { - compatible = "rockchip,rk3288-dw-mshc"; - max-frequency = <150000000>; - clocks = <&cru HCLK_SDIO1>, <&cru SCLK_SDIO1>, - <&cru SCLK_SDIO1_DRV>, <&cru SCLK_SDIO1_SAMPLE>; - clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; - fifo-depth = <0x100>; - interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0xff0e0000 0x0 0x4000>; - resets = <&cru SRST_SDIO1>; - reset-names = "reset"; - status = "disabled"; - }; - - emmc: mmc@ff0f0000 { - compatible = "rockchip,rk3288-dw-mshc"; - max-frequency = <150000000>; - clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>, - <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>; - clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; - fifo-depth = <0x100>; - interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0xff0f0000 0x0 0x4000>; - resets = <&cru SRST_EMMC>; - reset-names = "reset"; - status = "disabled"; - }; - - saradc: saradc@ff100000 { - compatible = "rockchip,saradc"; - reg = <0x0 0xff100000 0x0 0x100>; - interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; - #io-channel-cells = <1>; - clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>; - clock-names = "saradc", "apb_pclk"; - resets = <&cru SRST_SARADC>; - reset-names = "saradc-apb"; - status = "disabled"; - }; - - spi0: spi@ff110000 { - compatible = "rockchip,rk3288-spi", "rockchip,rk3066-spi"; - clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>; - clock-names = "spiclk", "apb_pclk"; - dmas = <&dmac_peri 11>, <&dmac_peri 12>; - dma-names = "tx", "rx"; - interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0>; - reg = <0x0 0xff110000 0x0 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - spi1: spi@ff120000 { - compatible = "rockchip,rk3288-spi", "rockchip,rk3066-spi"; - clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>; - clock-names = "spiclk", "apb_pclk"; - dmas = <&dmac_peri 13>, <&dmac_peri 14>; - dma-names = "tx", "rx"; - interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&spi1_clk &spi1_tx &spi1_rx &spi1_cs0>; - reg = <0x0 0xff120000 0x0 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - spi2: spi@ff130000 { - compatible = "rockchip,rk3288-spi", "rockchip,rk3066-spi"; - clocks = <&cru SCLK_SPI2>, <&cru PCLK_SPI2>; - clock-names = "spiclk", "apb_pclk"; - dmas = <&dmac_peri 15>, <&dmac_peri 16>; - dma-names = "tx", "rx"; - interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&spi2_clk &spi2_tx &spi2_rx &spi2_cs0>; - reg = <0x0 0xff130000 0x0 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c1: i2c@ff140000 { - compatible = "rockchip,rk3288-i2c"; - reg = <0x0 0xff140000 0x0 0x1000>; - interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - clock-names = "i2c"; - clocks = <&cru PCLK_I2C1>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_xfer>; - status = "disabled"; - }; - - i2c3: i2c@ff150000 { - compatible = "rockchip,rk3288-i2c"; - reg = <0x0 0xff150000 0x0 0x1000>; - interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - clock-names = "i2c"; - clocks = <&cru PCLK_I2C3>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c3_xfer>; - status = "disabled"; - }; - - i2c4: i2c@ff160000 { - compatible = "rockchip,rk3288-i2c"; - reg = <0x0 0xff160000 0x0 0x1000>; - interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - clock-names = "i2c"; - clocks = <&cru PCLK_I2C4>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c4_xfer>; - status = "disabled"; - }; - - i2c5: i2c@ff170000 { - compatible = "rockchip,rk3288-i2c"; - reg = <0x0 0xff170000 0x0 0x1000>; - interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - clock-names = "i2c"; - clocks = <&cru PCLK_I2C5>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c5_xfer>; - status = "disabled"; - }; - - uart0: serial@ff180000 { - compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart"; - reg = <0x0 0xff180000 0x0 0x100>; - interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>; - clock-names = "baudclk", "apb_pclk"; - dmas = <&dmac_peri 1>, <&dmac_peri 2>; - dma-names = "tx", "rx"; - pinctrl-names = "default"; - pinctrl-0 = <&uart0_xfer>; - status = "disabled"; - }; - - uart1: serial@ff190000 { - compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart"; - reg = <0x0 0xff190000 0x0 0x100>; - interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>; - clock-names = "baudclk", "apb_pclk"; - dmas = <&dmac_peri 3>, <&dmac_peri 4>; - dma-names = "tx", "rx"; - pinctrl-names = "default"; - pinctrl-0 = <&uart1_xfer>; - status = "disabled"; - }; - - uart2: serial@ff690000 { - compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart"; - reg = <0x0 0xff690000 0x0 0x100>; - interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>; - clock-names = "baudclk", "apb_pclk"; - pinctrl-names = "default"; - pinctrl-0 = <&uart2_xfer>; - status = "disabled"; - }; - - uart3: serial@ff1b0000 { - compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart"; - reg = <0x0 0xff1b0000 0x0 0x100>; - interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>; - clock-names = "baudclk", "apb_pclk"; - dmas = <&dmac_peri 7>, <&dmac_peri 8>; - dma-names = "tx", "rx"; - pinctrl-names = "default"; - pinctrl-0 = <&uart3_xfer>; - status = "disabled"; - }; - - uart4: serial@ff1c0000 { - compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart"; - reg = <0x0 0xff1c0000 0x0 0x100>; - interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>; - clock-names = "baudclk", "apb_pclk"; - dmas = <&dmac_peri 9>, <&dmac_peri 10>; - dma-names = "tx", "rx"; - pinctrl-names = "default"; - pinctrl-0 = <&uart4_xfer>; - status = "disabled"; - }; - - dmac_peri: dma-controller@ff250000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x0 0xff250000 0x0 0x4000>; - interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; - #dma-cells = <1>; - arm,pl330-broken-no-flushp; - arm,pl330-periph-burst; - clocks = <&cru ACLK_DMAC2>; - clock-names = "apb_pclk"; - }; - - thermal-zones { - reserve_thermal: reserve-thermal { - polling-delay-passive = <1000>; /* milliseconds */ - polling-delay = <5000>; /* milliseconds */ - - thermal-sensors = <&tsadc 0>; - }; - - cpu_thermal: cpu-thermal { - polling-delay-passive = <100>; /* milliseconds */ - polling-delay = <5000>; /* milliseconds */ - - thermal-sensors = <&tsadc 1>; - - trips { - cpu_alert0: cpu_alert0 { - temperature = <70000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "passive"; - }; - cpu_alert1: cpu_alert1 { - temperature = <75000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "passive"; - }; - cpu_crit: cpu_crit { - temperature = <90000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "critical"; - }; - }; - - cooling-maps { - map0 { - trip = <&cpu_alert0>; - cooling-device = - <&cpu0 THERMAL_NO_LIMIT 6>, - <&cpu1 THERMAL_NO_LIMIT 6>, - <&cpu2 THERMAL_NO_LIMIT 6>, - <&cpu3 THERMAL_NO_LIMIT 6>; - }; - map1 { - trip = <&cpu_alert1>; - cooling-device = - <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - }; - - gpu_thermal: gpu-thermal { - polling-delay-passive = <100>; /* milliseconds */ - polling-delay = <5000>; /* milliseconds */ - - thermal-sensors = <&tsadc 2>; - - trips { - gpu_alert0: gpu_alert0 { - temperature = <70000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "passive"; - }; - gpu_crit: gpu_crit { - temperature = <90000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "critical"; - }; - }; - - cooling-maps { - map0 { - trip = <&gpu_alert0>; - cooling-device = - <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - }; - }; - - tsadc: tsadc@ff280000 { - compatible = "rockchip,rk3288-tsadc"; - reg = <0x0 0xff280000 0x0 0x100>; - interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>; - clock-names = "tsadc", "apb_pclk"; - resets = <&cru SRST_TSADC>; - reset-names = "tsadc-apb"; - pinctrl-names = "init", "default", "sleep"; - pinctrl-0 = <&otp_pin>; - pinctrl-1 = <&otp_out>; - pinctrl-2 = <&otp_pin>; - #thermal-sensor-cells = <1>; - rockchip,grf = <&grf>; - rockchip,hw-tshut-temp = <95000>; - status = "disabled"; - }; - - gmac: ethernet@ff290000 { - compatible = "rockchip,rk3288-gmac"; - reg = <0x0 0xff290000 0x0 0x10000>; - interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "macirq", "eth_wake_irq"; - rockchip,grf = <&grf>; - clocks = <&cru SCLK_MAC>, - <&cru SCLK_MAC_RX>, <&cru SCLK_MAC_TX>, - <&cru SCLK_MACREF>, <&cru SCLK_MACREF_OUT>, - <&cru ACLK_GMAC>, <&cru PCLK_GMAC>; - clock-names = "stmmaceth", - "mac_clk_rx", "mac_clk_tx", - "clk_mac_ref", "clk_mac_refout", - "aclk_mac", "pclk_mac"; - resets = <&cru SRST_MAC>; - reset-names = "stmmaceth"; - status = "disabled"; - }; - - usb_host0_ehci: usb@ff500000 { - compatible = "generic-ehci"; - reg = <0x0 0xff500000 0x0 0x100>; - interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru HCLK_USBHOST0>; - phys = <&usbphy1>; - phy-names = "usb"; - status = "disabled"; - }; - - /* NOTE: doesn't work on RK3288, but was fixed on RK3288W */ - usb_host0_ohci: usb@ff520000 { - compatible = "generic-ohci"; - reg = <0x0 0xff520000 0x0 0x100>; - interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru HCLK_USBHOST0>; - phys = <&usbphy1>; - phy-names = "usb"; - status = "disabled"; - }; - - usb_host1: usb@ff540000 { - compatible = "rockchip,rk3288-usb", "rockchip,rk3066-usb", - "snps,dwc2"; - reg = <0x0 0xff540000 0x0 0x40000>; - interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru HCLK_USBHOST1>; - clock-names = "otg"; - dr_mode = "host"; - phys = <&usbphy2>; - phy-names = "usb2-phy"; - snps,reset-phy-on-wake; - status = "disabled"; - }; - - usb_otg: usb@ff580000 { - compatible = "rockchip,rk3288-usb", "rockchip,rk3066-usb", - "snps,dwc2"; - reg = <0x0 0xff580000 0x0 0x40000>; - interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru HCLK_OTG0>; - clock-names = "otg"; - dr_mode = "otg"; - g-np-tx-fifo-size = <16>; - g-rx-fifo-size = <275>; - g-tx-fifo-size = <256 128 128 64 64 32>; - phys = <&usbphy0>; - phy-names = "usb2-phy"; - status = "disabled"; - }; - - usb_hsic: usb@ff5c0000 { - compatible = "generic-ehci"; - reg = <0x0 0xff5c0000 0x0 0x100>; - interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru HCLK_HSIC>; - status = "disabled"; - }; - - dmac_bus_ns: dma-controller@ff600000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x0 0xff600000 0x0 0x4000>; - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; - #dma-cells = <1>; - arm,pl330-broken-no-flushp; - arm,pl330-periph-burst; - clocks = <&cru ACLK_DMAC1>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - - i2c0: i2c@ff650000 { - compatible = "rockchip,rk3288-i2c"; - reg = <0x0 0xff650000 0x0 0x1000>; - interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - clock-names = "i2c"; - clocks = <&cru PCLK_I2C0>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_xfer>; - status = "disabled"; - }; - - i2c2: i2c@ff660000 { - compatible = "rockchip,rk3288-i2c"; - reg = <0x0 0xff660000 0x0 0x1000>; - interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - clock-names = "i2c"; - clocks = <&cru PCLK_I2C2>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_xfer>; - status = "disabled"; - }; - - pwm0: pwm@ff680000 { - compatible = "rockchip,rk3288-pwm"; - reg = <0x0 0xff680000 0x0 0x10>; - #pwm-cells = <3>; - pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pin>; - clocks = <&cru PCLK_RKPWM>; - status = "disabled"; - }; - - pwm1: pwm@ff680010 { - compatible = "rockchip,rk3288-pwm"; - reg = <0x0 0xff680010 0x0 0x10>; - #pwm-cells = <3>; - pinctrl-names = "default"; - pinctrl-0 = <&pwm1_pin>; - clocks = <&cru PCLK_RKPWM>; - status = "disabled"; - }; - - pwm2: pwm@ff680020 { - compatible = "rockchip,rk3288-pwm"; - reg = <0x0 0xff680020 0x0 0x10>; - #pwm-cells = <3>; - pinctrl-names = "default"; - pinctrl-0 = <&pwm2_pin>; - clocks = <&cru PCLK_RKPWM>; - status = "disabled"; - }; - - pwm3: pwm@ff680030 { - compatible = "rockchip,rk3288-pwm"; - reg = <0x0 0xff680030 0x0 0x10>; - #pwm-cells = <3>; - pinctrl-names = "default"; - pinctrl-0 = <&pwm3_pin>; - clocks = <&cru PCLK_RKPWM>; - status = "disabled"; - }; - - bus_intmem: sram@ff700000 { - compatible = "mmio-sram"; - reg = <0x0 0xff700000 0x0 0x18000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x0 0xff700000 0x18000>; - smp-sram@0 { - compatible = "rockchip,rk3066-smp-sram"; - reg = <0x00 0x10>; - }; - }; - - pmu_sram: sram@ff720000 { - compatible = "rockchip,rk3288-pmu-sram", "mmio-sram"; - reg = <0x0 0xff720000 0x0 0x1000>; - }; - - pmu: power-management@ff730000 { - compatible = "rockchip,rk3288-pmu", "syscon", "simple-mfd"; - reg = <0x0 0xff730000 0x0 0x100>; - - power: power-controller { - compatible = "rockchip,rk3288-power-controller"; - #power-domain-cells = <1>; - #address-cells = <1>; - #size-cells = <0>; - - assigned-clocks = <&cru SCLK_EDP_24M>; - assigned-clock-parents = <&xin24m>; - - /* - * Note: Although SCLK_* are the working clocks - * of device without including on the NOC, needed for - * synchronous reset. - * - * The clocks on the which NOC: - * ACLK_IEP/ACLK_VIP/ACLK_VOP0 are on ACLK_VIO0_NIU. - * ACLK_ISP/ACLK_VOP1 are on ACLK_VIO1_NIU. - * ACLK_RGA is on ACLK_RGA_NIU. - * The others (HCLK_*,PLCK_*) are on HCLK_VIO_NIU. - * - * Which clock are device clocks: - * clocks devices - * *_IEP IEP:Image Enhancement Processor - * *_ISP ISP:Image Signal Processing - * *_VIP VIP:Video Input Processor - * *_VOP* VOP:Visual Output Processor - * *_RGA RGA - * *_EDP* EDP - * *_LVDS_* LVDS - * *_HDMI HDMI - * *_MIPI_* MIPI - */ - power-domain@RK3288_PD_VIO { - reg = <RK3288_PD_VIO>; - clocks = <&cru ACLK_IEP>, - <&cru ACLK_ISP>, - <&cru ACLK_RGA>, - <&cru ACLK_VIP>, - <&cru ACLK_VOP0>, - <&cru ACLK_VOP1>, - <&cru DCLK_VOP0>, - <&cru DCLK_VOP1>, - <&cru HCLK_IEP>, - <&cru HCLK_ISP>, - <&cru HCLK_RGA>, - <&cru HCLK_VIP>, - <&cru HCLK_VOP0>, - <&cru HCLK_VOP1>, - <&cru PCLK_EDP_CTRL>, - <&cru PCLK_HDMI_CTRL>, - <&cru PCLK_LVDS_PHY>, - <&cru PCLK_MIPI_CSI>, - <&cru PCLK_MIPI_DSI0>, - <&cru PCLK_MIPI_DSI1>, - <&cru SCLK_EDP_24M>, - <&cru SCLK_EDP>, - <&cru SCLK_ISP_JPE>, - <&cru SCLK_ISP>, - <&cru SCLK_RGA>; - pm_qos = <&qos_vio0_iep>, - <&qos_vio1_vop>, - <&qos_vio1_isp_w0>, - <&qos_vio1_isp_w1>, - <&qos_vio0_vop>, - <&qos_vio0_vip>, - <&qos_vio2_rga_r>, - <&qos_vio2_rga_w>, - <&qos_vio1_isp_r>; - #power-domain-cells = <0>; - }; - - /* - * Note: The following 3 are HEVC(H.265) clocks, - * and on the ACLK_HEVC_NIU (NOC). - */ - power-domain@RK3288_PD_HEVC { - reg = <RK3288_PD_HEVC>; - clocks = <&cru ACLK_HEVC>, - <&cru SCLK_HEVC_CABAC>, - <&cru SCLK_HEVC_CORE>; - pm_qos = <&qos_hevc_r>, - <&qos_hevc_w>; - #power-domain-cells = <0>; - }; - - /* - * Note: ACLK_VCODEC/HCLK_VCODEC are VCODEC - * (video endecoder & decoder) clocks that on the - * ACLK_VCODEC_NIU and HCLK_VCODEC_NIU (NOC). - */ - power-domain@RK3288_PD_VIDEO { - reg = <RK3288_PD_VIDEO>; - clocks = <&cru ACLK_VCODEC>, - <&cru HCLK_VCODEC>; - pm_qos = <&qos_video>; - #power-domain-cells = <0>; - }; - - /* - * Note: ACLK_GPU is the GPU clock, - * and on the ACLK_GPU_NIU (NOC). - */ - power-domain@RK3288_PD_GPU { - reg = <RK3288_PD_GPU>; - clocks = <&cru ACLK_GPU>; - pm_qos = <&qos_gpu_r>, - <&qos_gpu_w>; - #power-domain-cells = <0>; - }; - }; - - reboot-mode { - compatible = "syscon-reboot-mode"; - offset = <0x94>; - mode-normal = <BOOT_NORMAL>; - mode-recovery = <BOOT_RECOVERY>; - mode-bootloader = <BOOT_FASTBOOT>; - mode-loader = <BOOT_BL_DOWNLOAD>; - }; - }; - - sgrf: syscon@ff740000 { - compatible = "rockchip,rk3288-sgrf", "syscon"; - reg = <0x0 0xff740000 0x0 0x1000>; - }; - - cru: clock-controller@ff760000 { - compatible = "rockchip,rk3288-cru"; - reg = <0x0 0xff760000 0x0 0x1000>; - clocks = <&xin24m>; - clock-names = "xin24m"; - rockchip,grf = <&grf>; - #clock-cells = <1>; - #reset-cells = <1>; - assigned-clocks = <&cru PLL_GPLL>, <&cru PLL_CPLL>, - <&cru PLL_NPLL>, <&cru ACLK_CPU>, - <&cru HCLK_CPU>, <&cru PCLK_CPU>, - <&cru ACLK_PERI>, <&cru HCLK_PERI>, - <&cru PCLK_PERI>; - assigned-clock-rates = <594000000>, <400000000>, - <500000000>, <300000000>, - <150000000>, <75000000>, - <300000000>, <150000000>, - <75000000>; - }; - - grf: syscon@ff770000 { - compatible = "rockchip,rk3288-grf", "syscon", "simple-mfd"; - reg = <0x0 0xff770000 0x0 0x1000>; - - edp_phy: edp-phy { - compatible = "rockchip,rk3288-dp-phy"; - clocks = <&cru SCLK_EDP_24M>; - clock-names = "24m"; - #phy-cells = <0>; - status = "disabled"; - }; - - io_domains: io-domains { - compatible = "rockchip,rk3288-io-voltage-domain"; - status = "disabled"; - }; - - usbphy: usbphy { - compatible = "rockchip,rk3288-usb-phy"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - - usbphy0: usb-phy@320 { - #phy-cells = <0>; - reg = <0x320>; - clocks = <&cru SCLK_OTGPHY0>; - clock-names = "phyclk"; - #clock-cells = <0>; - resets = <&cru SRST_USBOTG_PHY>; - reset-names = "phy-reset"; - }; - - usbphy1: usb-phy@334 { - #phy-cells = <0>; - reg = <0x334>; - clocks = <&cru SCLK_OTGPHY1>; - clock-names = "phyclk"; - #clock-cells = <0>; - resets = <&cru SRST_USBHOST0_PHY>; - reset-names = "phy-reset"; - }; - - usbphy2: usb-phy@348 { - #phy-cells = <0>; - reg = <0x348>; - clocks = <&cru SCLK_OTGPHY2>; - clock-names = "phyclk"; - #clock-cells = <0>; - resets = <&cru SRST_USBHOST1_PHY>; - reset-names = "phy-reset"; - }; - }; - }; - - wdt: watchdog@ff800000 { - compatible = "rockchip,rk3288-wdt", "snps,dw-wdt"; - reg = <0x0 0xff800000 0x0 0x100>; - clocks = <&cru PCLK_WDT>; - interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - }; - - spdif: sound@ff8b0000 { - compatible = "rockchip,rk3288-spdif", "rockchip,rk3066-spdif"; - reg = <0x0 0xff8b0000 0x0 0x10000>; - #sound-dai-cells = <0>; - clocks = <&cru SCLK_SPDIF8CH>, <&cru HCLK_SPDIF8CH>; - clock-names = "mclk", "hclk"; - dmas = <&dmac_bus_s 3>; - dma-names = "tx"; - interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&spdif_tx>; - rockchip,grf = <&grf>; - status = "disabled"; - }; - - i2s: i2s@ff890000 { - compatible = "rockchip,rk3288-i2s", "rockchip,rk3066-i2s"; - reg = <0x0 0xff890000 0x0 0x10000>; - #sound-dai-cells = <0>; - interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru SCLK_I2S0>, <&cru HCLK_I2S0>; - clock-names = "i2s_clk", "i2s_hclk"; - dmas = <&dmac_bus_s 0>, <&dmac_bus_s 1>; - dma-names = "tx", "rx"; - pinctrl-names = "default"; - pinctrl-0 = <&i2s0_bus>; - rockchip,playback-channels = <8>; - rockchip,capture-channels = <2>; - status = "disabled"; - }; - - crypto: crypto@ff8a0000 { - compatible = "rockchip,rk3288-crypto"; - reg = <0x0 0xff8a0000 0x0 0x4000>; - interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru ACLK_CRYPTO>, <&cru HCLK_CRYPTO>, - <&cru SCLK_CRYPTO>, <&cru ACLK_DMAC1>; - clock-names = "aclk", "hclk", "sclk", "apb_pclk"; - resets = <&cru SRST_CRYPTO>; - reset-names = "crypto-rst"; - }; - - iep_mmu: iommu@ff900800 { - compatible = "rockchip,iommu"; - reg = <0x0 0xff900800 0x0 0x40>; - interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru ACLK_IEP>, <&cru HCLK_IEP>; - clock-names = "aclk", "iface"; - #iommu-cells = <0>; - status = "disabled"; - }; - - isp_mmu: iommu@ff914000 { - compatible = "rockchip,iommu"; - reg = <0x0 0xff914000 0x0 0x100>, <0x0 0xff915000 0x0 0x100>; - interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru ACLK_ISP>, <&cru HCLK_ISP>; - clock-names = "aclk", "iface"; - #iommu-cells = <0>; - rockchip,disable-mmu-reset; - status = "disabled"; - }; - - rga: rga@ff920000 { - compatible = "rockchip,rk3288-rga"; - reg = <0x0 0xff920000 0x0 0x180>; - interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru ACLK_RGA>, <&cru HCLK_RGA>, <&cru SCLK_RGA>; - clock-names = "aclk", "hclk", "sclk"; - power-domains = <&power RK3288_PD_VIO>; - resets = <&cru SRST_RGA_CORE>, <&cru SRST_RGA_AXI>, <&cru SRST_RGA_AHB>; - reset-names = "core", "axi", "ahb"; - }; - - vopb: vop@ff930000 { - compatible = "rockchip,rk3288-vop"; - reg = <0x0 0xff930000 0x0 0x19c>, <0x0 0xff931000 0x0 0x1000>; - interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru ACLK_VOP0>, <&cru DCLK_VOP0>, <&cru HCLK_VOP0>; - clock-names = "aclk_vop", "dclk_vop", "hclk_vop"; - power-domains = <&power RK3288_PD_VIO>; - resets = <&cru SRST_LCDC0_AXI>, <&cru SRST_LCDC0_AHB>, <&cru SRST_LCDC0_DCLK>; - reset-names = "axi", "ahb", "dclk"; - iommus = <&vopb_mmu>; - status = "disabled"; - - vopb_out: port { - #address-cells = <1>; - #size-cells = <0>; - - vopb_out_hdmi: endpoint@0 { - reg = <0>; - remote-endpoint = <&hdmi_in_vopb>; - }; - - vopb_out_edp: endpoint@1 { - reg = <1>; - remote-endpoint = <&edp_in_vopb>; - }; - - vopb_out_mipi: endpoint@2 { - reg = <2>; - remote-endpoint = <&mipi_in_vopb>; - }; - - vopb_out_lvds: endpoint@3 { - reg = <3>; - remote-endpoint = <&lvds_in_vopb>; - }; - }; - }; - - vopb_mmu: iommu@ff930300 { - compatible = "rockchip,iommu"; - reg = <0x0 0xff930300 0x0 0x100>; - interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru ACLK_VOP0>, <&cru HCLK_VOP0>; - clock-names = "aclk", "iface"; - power-domains = <&power RK3288_PD_VIO>; - #iommu-cells = <0>; - status = "disabled"; - }; - - vopl: vop@ff940000 { - compatible = "rockchip,rk3288-vop"; - reg = <0x0 0xff940000 0x0 0x19c>, <0x0 0xff941000 0x0 0x1000>; - interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru ACLK_VOP1>, <&cru DCLK_VOP1>, <&cru HCLK_VOP1>; - clock-names = "aclk_vop", "dclk_vop", "hclk_vop"; - power-domains = <&power RK3288_PD_VIO>; - resets = <&cru SRST_LCDC1_AXI>, <&cru SRST_LCDC1_AHB>, <&cru SRST_LCDC1_DCLK>; - reset-names = "axi", "ahb", "dclk"; - iommus = <&vopl_mmu>; - status = "disabled"; - - vopl_out: port { - #address-cells = <1>; - #size-cells = <0>; - - vopl_out_hdmi: endpoint@0 { - reg = <0>; - remote-endpoint = <&hdmi_in_vopl>; - }; - - vopl_out_edp: endpoint@1 { - reg = <1>; - remote-endpoint = <&edp_in_vopl>; - }; - - vopl_out_mipi: endpoint@2 { - reg = <2>; - remote-endpoint = <&mipi_in_vopl>; - }; - - vopl_out_lvds: endpoint@3 { - reg = <3>; - remote-endpoint = <&lvds_in_vopl>; - }; - }; - }; - - vopl_mmu: iommu@ff940300 { - compatible = "rockchip,iommu"; - reg = <0x0 0xff940300 0x0 0x100>; - interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru ACLK_VOP1>, <&cru HCLK_VOP1>; - clock-names = "aclk", "iface"; - power-domains = <&power RK3288_PD_VIO>; - #iommu-cells = <0>; - status = "disabled"; - }; - - mipi_dsi: dsi@ff960000 { - compatible = "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi"; - reg = <0x0 0xff960000 0x0 0x4000>; - interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru SCLK_MIPIDSI_24M>, <&cru PCLK_MIPI_DSI0>; - clock-names = "ref", "pclk"; - power-domains = <&power RK3288_PD_VIO>; - rockchip,grf = <&grf>; - status = "disabled"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - mipi_in: port@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <0>; - - mipi_in_vopb: endpoint@0 { - reg = <0>; - remote-endpoint = <&vopb_out_mipi>; - }; - - mipi_in_vopl: endpoint@1 { - reg = <1>; - remote-endpoint = <&vopl_out_mipi>; - }; - }; - - mipi_out: port@1 { - reg = <1>; - }; - }; - }; - - lvds: lvds@ff96c000 { - compatible = "rockchip,rk3288-lvds"; - reg = <0x0 0xff96c000 0x0 0x4000>; - clocks = <&cru PCLK_LVDS_PHY>; - clock-names = "pclk_lvds"; - pinctrl-names = "lcdc"; - pinctrl-0 = <&lcdc_ctl>; - power-domains = <&power RK3288_PD_VIO>; - rockchip,grf = <&grf>; - status = "disabled"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - lvds_in: port@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <0>; - - lvds_in_vopb: endpoint@0 { - reg = <0>; - remote-endpoint = <&vopb_out_lvds>; - }; - - lvds_in_vopl: endpoint@1 { - reg = <1>; - remote-endpoint = <&vopl_out_lvds>; - }; - }; - - lvds_out: port@1 { - reg = <1>; - }; - }; - }; - - edp: dp@ff970000 { - compatible = "rockchip,rk3288-dp"; - reg = <0x0 0xff970000 0x0 0x4000>; - interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru SCLK_EDP>, <&cru PCLK_EDP_CTRL>; - clock-names = "dp", "pclk"; - phys = <&edp_phy>; - phy-names = "dp"; - power-domains = <&power RK3288_PD_VIO>; - resets = <&cru SRST_EDP>; - reset-names = "dp"; - rockchip,grf = <&grf>; - status = "disabled"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - edp_in: port@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <0>; - - edp_in_vopb: endpoint@0 { - reg = <0>; - remote-endpoint = <&vopb_out_edp>; - }; - - edp_in_vopl: endpoint@1 { - reg = <1>; - remote-endpoint = <&vopl_out_edp>; - }; - }; - - edp_out: port@1 { - reg = <1>; - }; - }; - }; - - hdmi: hdmi@ff980000 { - compatible = "rockchip,rk3288-dw-hdmi"; - reg = <0x0 0xff980000 0x0 0x20000>; - reg-io-width = <4>; - #sound-dai-cells = <0>; - rockchip,grf = <&grf>; - interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>, <&cru SCLK_HDMI_CEC>; - clock-names = "iahb", "isfr", "cec"; - power-domains = <&power RK3288_PD_VIO>; - status = "disabled"; - - ports { - hdmi_in: port { - #address-cells = <1>; - #size-cells = <0>; - hdmi_in_vopb: endpoint@0 { - reg = <0>; - remote-endpoint = <&vopb_out_hdmi>; - }; - hdmi_in_vopl: endpoint@1 { - reg = <1>; - remote-endpoint = <&vopl_out_hdmi>; - }; - }; - }; - }; - - vpu: video-codec@ff9a0000 { - compatible = "rockchip,rk3288-vpu"; - reg = <0x0 0xff9a0000 0x0 0x800>; - interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "vepu", "vdpu"; - clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>; - clock-names = "aclk", "hclk"; - iommus = <&vpu_mmu>; - power-domains = <&power RK3288_PD_VIDEO>; - }; - - vpu_mmu: iommu@ff9a0800 { - compatible = "rockchip,iommu"; - reg = <0x0 0xff9a0800 0x0 0x100>; - interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>; - clock-names = "aclk", "iface"; - #iommu-cells = <0>; - power-domains = <&power RK3288_PD_VIDEO>; - }; - - hevc_mmu: iommu@ff9c0440 { - compatible = "rockchip,iommu"; - reg = <0x0 0xff9c0440 0x0 0x40>, <0x0 0xff9c0480 0x0 0x40>; - interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru ACLK_HEVC>, <&cru HCLK_HEVC>; - clock-names = "aclk", "iface"; - #iommu-cells = <0>; - status = "disabled"; - }; - - gpu: gpu@ffa30000 { - compatible = "rockchip,rk3288-mali", "arm,mali-t760"; - reg = <0x0 0xffa30000 0x0 0x10000>; - interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "job", "mmu", "gpu"; - clocks = <&cru ACLK_GPU>; - operating-points-v2 = <&gpu_opp_table>; - #cooling-cells = <2>; /* min followed by max */ - power-domains = <&power RK3288_PD_GPU>; - status = "disabled"; - }; - - gpu_opp_table: opp-table-1 { - compatible = "operating-points-v2"; - - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; - opp-microvolt = <950000>; - }; - opp-200000000 { - opp-hz = /bits/ 64 <200000000>; - opp-microvolt = <950000>; - }; - opp-300000000 { - opp-hz = /bits/ 64 <300000000>; - opp-microvolt = <1000000>; - }; - opp-400000000 { - opp-hz = /bits/ 64 <400000000>; - opp-microvolt = <1100000>; - }; - opp-600000000 { - opp-hz = /bits/ 64 <600000000>; - opp-microvolt = <1250000>; - }; - }; - - qos_gpu_r: qos@ffaa0000 { - compatible = "rockchip,rk3288-qos", "syscon"; - reg = <0x0 0xffaa0000 0x0 0x20>; - }; - - qos_gpu_w: qos@ffaa0080 { - compatible = "rockchip,rk3288-qos", "syscon"; - reg = <0x0 0xffaa0080 0x0 0x20>; - }; - - qos_vio1_vop: qos@ffad0000 { - compatible = "rockchip,rk3288-qos", "syscon"; - reg = <0x0 0xffad0000 0x0 0x20>; - }; - - qos_vio1_isp_w0: qos@ffad0100 { - compatible = "rockchip,rk3288-qos", "syscon"; - reg = <0x0 0xffad0100 0x0 0x20>; - }; - - qos_vio1_isp_w1: qos@ffad0180 { - compatible = "rockchip,rk3288-qos", "syscon"; - reg = <0x0 0xffad0180 0x0 0x20>; - }; - - qos_vio0_vop: qos@ffad0400 { - compatible = "rockchip,rk3288-qos", "syscon"; - reg = <0x0 0xffad0400 0x0 0x20>; - }; - - qos_vio0_vip: qos@ffad0480 { - compatible = "rockchip,rk3288-qos", "syscon"; - reg = <0x0 0xffad0480 0x0 0x20>; - }; - - qos_vio0_iep: qos@ffad0500 { - compatible = "rockchip,rk3288-qos", "syscon"; - reg = <0x0 0xffad0500 0x0 0x20>; - }; - - qos_vio2_rga_r: qos@ffad0800 { - compatible = "rockchip,rk3288-qos", "syscon"; - reg = <0x0 0xffad0800 0x0 0x20>; - }; - - qos_vio2_rga_w: qos@ffad0880 { - compatible = "rockchip,rk3288-qos", "syscon"; - reg = <0x0 0xffad0880 0x0 0x20>; - }; - - qos_vio1_isp_r: qos@ffad0900 { - compatible = "rockchip,rk3288-qos", "syscon"; - reg = <0x0 0xffad0900 0x0 0x20>; - }; - - qos_video: qos@ffae0000 { - compatible = "rockchip,rk3288-qos", "syscon"; - reg = <0x0 0xffae0000 0x0 0x20>; - }; - - qos_hevc_r: qos@ffaf0000 { - compatible = "rockchip,rk3288-qos", "syscon"; - reg = <0x0 0xffaf0000 0x0 0x20>; - }; - - qos_hevc_w: qos@ffaf0080 { - compatible = "rockchip,rk3288-qos", "syscon"; - reg = <0x0 0xffaf0080 0x0 0x20>; - }; - - dmac_bus_s: dma-controller@ffb20000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x0 0xffb20000 0x0 0x4000>; - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; - #dma-cells = <1>; - arm,pl330-broken-no-flushp; - arm,pl330-periph-burst; - clocks = <&cru ACLK_DMAC1>; - clock-names = "apb_pclk"; - }; - - efuse: efuse@ffb40000 { - compatible = "rockchip,rk3288-efuse"; - reg = <0x0 0xffb40000 0x0 0x20>; - #address-cells = <1>; - #size-cells = <1>; - clocks = <&cru PCLK_EFUSE256>; - clock-names = "pclk_efuse"; - - cpu_id: cpu-id@7 { - reg = <0x07 0x10>; - }; - cpu_leakage: cpu_leakage@17 { - reg = <0x17 0x1>; - }; - }; - - gic: interrupt-controller@ffc01000 { - compatible = "arm,gic-400"; - interrupt-controller; - #interrupt-cells = <3>; - #address-cells = <0>; - - reg = <0x0 0xffc01000 0x0 0x1000>, - <0x0 0xffc02000 0x0 0x2000>, - <0x0 0xffc04000 0x0 0x2000>, - <0x0 0xffc06000 0x0 0x2000>; - interrupts = <GIC_PPI 9 0xf04>; - }; - - pinctrl: pinctrl { - compatible = "rockchip,rk3288-pinctrl"; - rockchip,grf = <&grf>; - rockchip,pmu = <&pmu>; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - gpio0: gpio@ff750000 { - compatible = "rockchip,gpio-bank"; - reg = <0x0 0xff750000 0x0 0x100>; - interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru PCLK_GPIO0>; - - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio1: gpio@ff780000 { - compatible = "rockchip,gpio-bank"; - reg = <0x0 0xff780000 0x0 0x100>; - interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru PCLK_GPIO1>; - - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio2: gpio@ff790000 { - compatible = "rockchip,gpio-bank"; - reg = <0x0 0xff790000 0x0 0x100>; - interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru PCLK_GPIO2>; - - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio3: gpio@ff7a0000 { - compatible = "rockchip,gpio-bank"; - reg = <0x0 0xff7a0000 0x0 0x100>; - interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru PCLK_GPIO3>; - - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio4: gpio@ff7b0000 { - compatible = "rockchip,gpio-bank"; - reg = <0x0 0xff7b0000 0x0 0x100>; - interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru PCLK_GPIO4>; - - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio5: gpio@ff7c0000 { - compatible = "rockchip,gpio-bank"; - reg = <0x0 0xff7c0000 0x0 0x100>; - interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru PCLK_GPIO5>; - - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio6: gpio@ff7d0000 { - compatible = "rockchip,gpio-bank"; - reg = <0x0 0xff7d0000 0x0 0x100>; - interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru PCLK_GPIO6>; - - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio7: gpio@ff7e0000 { - compatible = "rockchip,gpio-bank"; - reg = <0x0 0xff7e0000 0x0 0x100>; - interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru PCLK_GPIO7>; - - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio8: gpio@ff7f0000 { - compatible = "rockchip,gpio-bank"; - reg = <0x0 0xff7f0000 0x0 0x100>; - interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru PCLK_GPIO8>; - - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - hdmi { - hdmi_cec_c0: hdmi-cec-c0 { - rockchip,pins = <7 RK_PC0 2 &pcfg_pull_none>; - }; - - hdmi_cec_c7: hdmi-cec-c7 { - rockchip,pins = <7 RK_PC7 4 &pcfg_pull_none>; - }; - - hdmi_ddc: hdmi-ddc { - rockchip,pins = <7 RK_PC3 2 &pcfg_pull_none>, - <7 RK_PC4 2 &pcfg_pull_none>; - }; - - hdmi_ddc_unwedge: hdmi-ddc-unwedge { - rockchip,pins = <7 RK_PC3 RK_FUNC_GPIO &pcfg_output_low>, - <7 RK_PC4 2 &pcfg_pull_none>; - }; - }; - - pcfg_output_low: pcfg-output-low { - output-low; - }; - - pcfg_pull_up: pcfg-pull-up { - bias-pull-up; - }; - - pcfg_pull_down: pcfg-pull-down { - bias-pull-down; - }; - - pcfg_pull_none: pcfg-pull-none { - bias-disable; - }; - - pcfg_pull_none_12ma: pcfg-pull-none-12ma { - bias-disable; - drive-strength = <12>; - }; - - suspend { - global_pwroff: global-pwroff { - rockchip,pins = <0 RK_PA0 1 &pcfg_pull_none>; - }; - - ddrio_pwroff: ddrio-pwroff { - rockchip,pins = <0 RK_PA1 1 &pcfg_pull_none>; - }; - - ddr0_retention: ddr0-retention { - rockchip,pins = <0 RK_PA2 1 &pcfg_pull_up>; - }; - - ddr1_retention: ddr1-retention { - rockchip,pins = <0 RK_PA3 1 &pcfg_pull_up>; - }; - }; - - edp { - edp_hpd: edp-hpd { - rockchip,pins = <7 RK_PB3 2 &pcfg_pull_down>; - }; - }; - - i2c0 { - i2c0_xfer: i2c0-xfer { - rockchip,pins = <0 RK_PB7 1 &pcfg_pull_none>, - <0 RK_PC0 1 &pcfg_pull_none>; - }; - }; - - i2c1 { - i2c1_xfer: i2c1-xfer { - rockchip,pins = <8 RK_PA4 1 &pcfg_pull_none>, - <8 RK_PA5 1 &pcfg_pull_none>; - }; - }; - - i2c2 { - i2c2_xfer: i2c2-xfer { - rockchip,pins = <6 RK_PB1 1 &pcfg_pull_none>, - <6 RK_PB2 1 &pcfg_pull_none>; - }; - }; - - i2c3 { - i2c3_xfer: i2c3-xfer { - rockchip,pins = <2 RK_PC0 1 &pcfg_pull_none>, - <2 RK_PC1 1 &pcfg_pull_none>; - }; - }; - - i2c4 { - i2c4_xfer: i2c4-xfer { - rockchip,pins = <7 RK_PC1 1 &pcfg_pull_none>, - <7 RK_PC2 1 &pcfg_pull_none>; - }; - }; - - i2c5 { - i2c5_xfer: i2c5-xfer { - rockchip,pins = <7 RK_PC3 1 &pcfg_pull_none>, - <7 RK_PC4 1 &pcfg_pull_none>; - }; - }; - - i2s0 { - i2s0_bus: i2s0-bus { - rockchip,pins = <6 RK_PA0 1 &pcfg_pull_none>, - <6 RK_PA1 1 &pcfg_pull_none>, - <6 RK_PA2 1 &pcfg_pull_none>, - <6 RK_PA3 1 &pcfg_pull_none>, - <6 RK_PA4 1 &pcfg_pull_none>, - <6 RK_PB0 1 &pcfg_pull_none>; - }; - }; - - lcdc { - lcdc_ctl: lcdc-ctl { - rockchip,pins = <1 RK_PD0 1 &pcfg_pull_none>, - <1 RK_PD1 1 &pcfg_pull_none>, - <1 RK_PD2 1 &pcfg_pull_none>, - <1 RK_PD3 1 &pcfg_pull_none>; - }; - }; - - sdmmc { - sdmmc_clk: sdmmc-clk { - rockchip,pins = <6 RK_PC4 1 &pcfg_pull_none>; - }; - - sdmmc_cmd: sdmmc-cmd { - rockchip,pins = <6 RK_PC5 1 &pcfg_pull_up>; - }; - - sdmmc_cd: sdmmc-cd { - rockchip,pins = <6 RK_PC6 1 &pcfg_pull_up>; - }; - - sdmmc_bus1: sdmmc-bus1 { - rockchip,pins = <6 RK_PC0 1 &pcfg_pull_up>; - }; - - sdmmc_bus4: sdmmc-bus4 { - rockchip,pins = <6 RK_PC0 1 &pcfg_pull_up>, - <6 RK_PC1 1 &pcfg_pull_up>, - <6 RK_PC2 1 &pcfg_pull_up>, - <6 RK_PC3 1 &pcfg_pull_up>; - }; - }; - - sdio0 { - sdio0_bus1: sdio0-bus1 { - rockchip,pins = <4 RK_PC4 1 &pcfg_pull_up>; - }; - - sdio0_bus4: sdio0-bus4 { - rockchip,pins = <4 RK_PC4 1 &pcfg_pull_up>, - <4 RK_PC5 1 &pcfg_pull_up>, - <4 RK_PC6 1 &pcfg_pull_up>, - <4 RK_PC7 1 &pcfg_pull_up>; - }; - - sdio0_cmd: sdio0-cmd { - rockchip,pins = <4 RK_PD0 1 &pcfg_pull_up>; - }; - - sdio0_clk: sdio0-clk { - rockchip,pins = <4 RK_PD1 1 &pcfg_pull_none>; - }; - - sdio0_cd: sdio0-cd { - rockchip,pins = <4 RK_PD2 1 &pcfg_pull_up>; - }; - - sdio0_wp: sdio0-wp { - rockchip,pins = <4 RK_PD3 1 &pcfg_pull_up>; - }; - - sdio0_pwr: sdio0-pwr { - rockchip,pins = <4 RK_PD4 1 &pcfg_pull_up>; - }; - - sdio0_bkpwr: sdio0-bkpwr { - rockchip,pins = <4 RK_PD5 1 &pcfg_pull_up>; - }; - - sdio0_int: sdio0-int { - rockchip,pins = <4 RK_PD6 1 &pcfg_pull_up>; - }; - }; - - sdio1 { - sdio1_bus1: sdio1-bus1 { - rockchip,pins = <3 RK_PD0 4 &pcfg_pull_up>; - }; - - sdio1_bus4: sdio1-bus4 { - rockchip,pins = <3 RK_PD0 4 &pcfg_pull_up>, - <3 RK_PD1 4 &pcfg_pull_up>, - <3 RK_PD2 4 &pcfg_pull_up>, - <3 RK_PD3 4 &pcfg_pull_up>; - }; - - sdio1_cd: sdio1-cd { - rockchip,pins = <3 RK_PD4 4 &pcfg_pull_up>; - }; - - sdio1_wp: sdio1-wp { - rockchip,pins = <3 RK_PD5 4 &pcfg_pull_up>; - }; - - sdio1_bkpwr: sdio1-bkpwr { - rockchip,pins = <3 RK_PD6 4 &pcfg_pull_up>; - }; - - sdio1_int: sdio1-int { - rockchip,pins = <3 RK_PD7 4 &pcfg_pull_up>; - }; - - sdio1_cmd: sdio1-cmd { - rockchip,pins = <4 RK_PA6 4 &pcfg_pull_up>; - }; - - sdio1_clk: sdio1-clk { - rockchip,pins = <4 RK_PA7 4 &pcfg_pull_none>; - }; - - sdio1_pwr: sdio1-pwr { - rockchip,pins = <4 RK_PB1 4 &pcfg_pull_up>; - }; - }; - - emmc { - emmc_clk: emmc-clk { - rockchip,pins = <3 RK_PC2 2 &pcfg_pull_none>; - }; - - emmc_cmd: emmc-cmd { - rockchip,pins = <3 RK_PC0 2 &pcfg_pull_up>; - }; - - emmc_pwr: emmc-pwr { - rockchip,pins = <3 RK_PB1 2 &pcfg_pull_up>; - }; - - emmc_bus1: emmc-bus1 { - rockchip,pins = <3 RK_PA0 2 &pcfg_pull_up>; - }; - - emmc_bus4: emmc-bus4 { - rockchip,pins = <3 RK_PA0 2 &pcfg_pull_up>, - <3 RK_PA1 2 &pcfg_pull_up>, - <3 RK_PA2 2 &pcfg_pull_up>, - <3 RK_PA3 2 &pcfg_pull_up>; - }; - - emmc_bus8: emmc-bus8 { - rockchip,pins = <3 RK_PA0 2 &pcfg_pull_up>, - <3 RK_PA1 2 &pcfg_pull_up>, - <3 RK_PA2 2 &pcfg_pull_up>, - <3 RK_PA3 2 &pcfg_pull_up>, - <3 RK_PA4 2 &pcfg_pull_up>, - <3 RK_PA5 2 &pcfg_pull_up>, - <3 RK_PA6 2 &pcfg_pull_up>, - <3 RK_PA7 2 &pcfg_pull_up>; - }; - }; - - spi0 { - spi0_clk: spi0-clk { - rockchip,pins = <5 RK_PB4 1 &pcfg_pull_up>; - }; - spi0_cs0: spi0-cs0 { - rockchip,pins = <5 RK_PB5 1 &pcfg_pull_up>; - }; - spi0_tx: spi0-tx { - rockchip,pins = <5 RK_PB6 1 &pcfg_pull_up>; - }; - spi0_rx: spi0-rx { - rockchip,pins = <5 RK_PB7 1 &pcfg_pull_up>; - }; - spi0_cs1: spi0-cs1 { - rockchip,pins = <5 RK_PC0 1 &pcfg_pull_up>; - }; - }; - spi1 { - spi1_clk: spi1-clk { - rockchip,pins = <7 RK_PB4 2 &pcfg_pull_up>; - }; - spi1_cs0: spi1-cs0 { - rockchip,pins = <7 RK_PB5 2 &pcfg_pull_up>; - }; - spi1_rx: spi1-rx { - rockchip,pins = <7 RK_PB6 2 &pcfg_pull_up>; - }; - spi1_tx: spi1-tx { - rockchip,pins = <7 RK_PB7 2 &pcfg_pull_up>; - }; - }; - - spi2 { - spi2_cs1: spi2-cs1 { - rockchip,pins = <8 RK_PA3 1 &pcfg_pull_up>; - }; - spi2_clk: spi2-clk { - rockchip,pins = <8 RK_PA6 1 &pcfg_pull_up>; - }; - spi2_cs0: spi2-cs0 { - rockchip,pins = <8 RK_PA7 1 &pcfg_pull_up>; - }; - spi2_rx: spi2-rx { - rockchip,pins = <8 RK_PB0 1 &pcfg_pull_up>; - }; - spi2_tx: spi2-tx { - rockchip,pins = <8 RK_PB1 1 &pcfg_pull_up>; - }; - }; - - uart0 { - uart0_xfer: uart0-xfer { - rockchip,pins = <4 RK_PC0 1 &pcfg_pull_up>, - <4 RK_PC1 1 &pcfg_pull_none>; - }; - - uart0_cts: uart0-cts { - rockchip,pins = <4 RK_PC2 1 &pcfg_pull_up>; - }; - - uart0_rts: uart0-rts { - rockchip,pins = <4 RK_PC3 1 &pcfg_pull_none>; - }; - }; - - uart1 { - uart1_xfer: uart1-xfer { - rockchip,pins = <5 RK_PB0 1 &pcfg_pull_up>, - <5 RK_PB1 1 &pcfg_pull_none>; - }; - - uart1_cts: uart1-cts { - rockchip,pins = <5 RK_PB2 1 &pcfg_pull_up>; - }; - - uart1_rts: uart1-rts { - rockchip,pins = <5 RK_PB3 1 &pcfg_pull_none>; - }; - }; - - uart2 { - uart2_xfer: uart2-xfer { - rockchip,pins = <7 RK_PC6 1 &pcfg_pull_up>, - <7 RK_PC7 1 &pcfg_pull_none>; - }; - /* no rts / cts for uart2 */ - }; - - uart3 { - uart3_xfer: uart3-xfer { - rockchip,pins = <7 RK_PA7 1 &pcfg_pull_up>, - <7 RK_PB0 1 &pcfg_pull_none>; - }; - - uart3_cts: uart3-cts { - rockchip,pins = <7 RK_PB1 1 &pcfg_pull_up>; - }; - - uart3_rts: uart3-rts { - rockchip,pins = <7 RK_PB2 1 &pcfg_pull_none>; - }; - }; - - uart4 { - uart4_xfer: uart4-xfer { - rockchip,pins = <5 RK_PB7 3 &pcfg_pull_up>, - <5 RK_PB6 3 &pcfg_pull_none>; - }; - - uart4_cts: uart4-cts { - rockchip,pins = <5 RK_PB4 3 &pcfg_pull_up>; - }; - - uart4_rts: uart4-rts { - rockchip,pins = <5 RK_PB5 3 &pcfg_pull_none>; - }; - }; - - tsadc { - otp_pin: otp-pin { - rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - otp_out: otp-out { - rockchip,pins = <0 RK_PB2 1 &pcfg_pull_none>; - }; - }; - - pwm0 { - pwm0_pin: pwm0-pin { - rockchip,pins = <7 RK_PA0 1 &pcfg_pull_none>; - }; - }; - - pwm1 { - pwm1_pin: pwm1-pin { - rockchip,pins = <7 RK_PA1 1 &pcfg_pull_none>; - }; - }; - - pwm2 { - pwm2_pin: pwm2-pin { - rockchip,pins = <7 RK_PC6 3 &pcfg_pull_none>; - }; - }; - - pwm3 { - pwm3_pin: pwm3-pin { - rockchip,pins = <7 RK_PC7 3 &pcfg_pull_none>; - }; - }; - - gmac { - rgmii_pins: rgmii-pins { - rockchip,pins = <3 RK_PD6 3 &pcfg_pull_none>, - <3 RK_PD7 3 &pcfg_pull_none>, - <3 RK_PD2 3 &pcfg_pull_none>, - <3 RK_PD3 3 &pcfg_pull_none>, - <3 RK_PD4 3 &pcfg_pull_none_12ma>, - <3 RK_PD5 3 &pcfg_pull_none_12ma>, - <3 RK_PD0 3 &pcfg_pull_none_12ma>, - <3 RK_PD1 3 &pcfg_pull_none_12ma>, - <4 RK_PA0 3 &pcfg_pull_none>, - <4 RK_PA5 3 &pcfg_pull_none>, - <4 RK_PA6 3 &pcfg_pull_none>, - <4 RK_PB1 3 &pcfg_pull_none_12ma>, - <4 RK_PA4 3 &pcfg_pull_none_12ma>, - <4 RK_PA1 3 &pcfg_pull_none>, - <4 RK_PA3 3 &pcfg_pull_none>; - }; - - rmii_pins: rmii-pins { - rockchip,pins = <3 RK_PD6 3 &pcfg_pull_none>, - <3 RK_PD7 3 &pcfg_pull_none>, - <3 RK_PD4 3 &pcfg_pull_none>, - <3 RK_PD5 3 &pcfg_pull_none>, - <4 RK_PA0 3 &pcfg_pull_none>, - <4 RK_PA5 3 &pcfg_pull_none>, - <4 RK_PA4 3 &pcfg_pull_none>, - <4 RK_PA1 3 &pcfg_pull_none>, - <4 RK_PA2 3 &pcfg_pull_none>, - <4 RK_PA3 3 &pcfg_pull_none>; - }; - }; - - spdif { - spdif_tx: spdif-tx { - rockchip,pins = <6 RK_PB3 1 &pcfg_pull_none>; - }; - }; - }; -}; diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig index 4d3157b2edd3..a9420406649c 100644 --- a/arch/arm/mach-rockchip/Kconfig +++ b/arch/arm/mach-rockchip/Kconfig @@ -131,6 +131,7 @@ config ROCKCHIP_RK3288 select SPL select SUPPORT_TPL select FDT_64BIT + imply OF_UPSTREAM imply PRE_CONSOLE_BUFFER imply ROCKCHIP_COMMON_BOARD imply SPL_ROCKCHIP_COMMON_BOARD diff --git a/board/chipspark/popmetal_rk3288/MAINTAINERS b/board/chipspark/popmetal_rk3288/MAINTAINERS index e12f128dcd70..9b1001260c78 100644 --- a/board/chipspark/popmetal_rk3288/MAINTAINERS +++ b/board/chipspark/popmetal_rk3288/MAINTAINERS @@ -1,7 +1,5 @@ POPMETAL-RK3288 -M: Lin Huang <hl(a)rock-chips.com> -S: Maintained -F: arch/arm/dts/rk3288-popmetal.dts +S: Orphan F: arch/arm/dts/rk3288-popmetal-u-boot.dtsi F: board/chipspark/popmetal_rk3288 F: include/configs/popmetal_rk3288.h diff --git a/board/google/veyron/MAINTAINERS b/board/google/veyron/MAINTAINERS index 67341b5d5564..382ad212569a 100644 --- a/board/google/veyron/MAINTAINERS +++ b/board/google/veyron/MAINTAINERS @@ -1,7 +1,6 @@ CHROMEBOOK JERRY BOARD M: Simon Glass <sjg(a)chromium.org> S: Maintained -F: arch/arm/dts/rk3288-veyron-jerry.dts F: arch/arm/dts/rk3288-veyron-jerry-u-boot.dtsi F: board/google/veyron/ F: include/configs/veyron.h @@ -10,7 +9,6 @@ F: configs/chromebook_jerry_defconfig CHROMEBIT MICKEY BOARD M: Simon Glass <sjg(a)chromium.org> S: Maintained -F: arch/arm/dts/rk3288-veyron-mickey.dts F: arch/arm/dts/rk3288-veyron-mickey-u-boot.dtsi F: board/google/veyron/ F: include/configs/veyron.h @@ -19,7 +17,6 @@ F: configs/chromebit_mickey_defconfig CHROMEBOOK MINNIE BOARD M: Simon Glass <sjg(a)chromium.org> S: Maintained -F: arch/arm/dts/rk3288-veyron-minnie.dts F: arch/arm/dts/rk3288-veyron-minnie-u-boot.dtsi F: board/google/veyron/ F: include/configs/veyron.h @@ -28,7 +25,6 @@ F: configs/chromebook_minnie_defconfig CHROMEBOOK SPEEDY BOARD M: Simon Glass <sjg(a)chromium.org> S: Maintained -F: arch/arm/dts/rk3288-veyron-speedy.dts F: arch/arm/dts/rk3288-veyron-speedy-u-boot.dtsi F: board/google/veyron/ F: include/configs/veyron.h @@ -37,8 +33,4 @@ F: configs/chromebook_speedy_defconfig CHROMEBOOK VEYRON COMMON FILES M: Simon Glass <sjg(a)chromium.org> S: Maintained -F: arch/arm/dts/rk3288-veyron.dtsi -F: arch/arm/dts/rk3288-veyron-analog-audio.dtsi -F: arch/arm/dts/rk3288-veyron-broadcom-bluetooth.dtsi -F: arch/arm/dts/rk3288-veyron-chromebook.dtsi -F: arch/arm/dts/rk3288-veyron-edp.dtsi +F: arch/arm/dts/rk3288-veyron-u-boot.dtsi diff --git a/board/mqmaker/miqi_rk3288/MAINTAINERS b/board/mqmaker/miqi_rk3288/MAINTAINERS index 1cb5f790fe78..8f25ec76a8b8 100644 --- a/board/mqmaker/miqi_rk3288/MAINTAINERS +++ b/board/mqmaker/miqi_rk3288/MAINTAINERS @@ -1,7 +1,5 @@ MIQI -M: Jernej Skrabec <jernej.skrabec(a)siol.net> -S: Maintained -F: arch/arm/dts/rk3288-miqi.dts +S: Orphan F: arch/arm/dts/rk3288-miqi-u-boot.dtsi F: board/mqmaker/miqi_rk3288 F: include/configs/miqi_rk3288.h diff --git a/board/rockchip/evb_rk3288/MAINTAINERS b/board/rockchip/evb_rk3288/MAINTAINERS index 9857ae335754..74a15438d231 100644 --- a/board/rockchip/evb_rk3288/MAINTAINERS +++ b/board/rockchip/evb_rk3288/MAINTAINERS @@ -1,12 +1,9 @@ EVB-RK3288 -M: Lin Huang <hl(a)rock-chips.com> -S: Maintained -F: arch/arm/dts/rk3288-evb.dts -F: arch/arm/dts/rk3288-evb.dtsi +S: Orphan F: arch/arm/dts/rk3288-evb-u-boot.dtsi F: board/rockchip/evb_rk3288 F: include/configs/evb_rk3288.h -F: configs/evb-rk3288_defconfig +F: configs/evb-rk808-rk3288_defconfig ROCK-PI-N8 M: Jagan Teki <jagan(a)amarulasolutions.com> diff --git a/board/rockchip/tinker_rk3288/MAINTAINERS b/board/rockchip/tinker_rk3288/MAINTAINERS index 3869d5dc8534..38eb76c81ea8 100644 --- a/board/rockchip/tinker_rk3288/MAINTAINERS +++ b/board/rockchip/tinker_rk3288/MAINTAINERS @@ -1,10 +1,5 @@ TINKER-RK3288 -M: Lin Huang <hl(a)rock-chips.com> -S: Maintained -F: arch/arm/dts/rk3288-tinker.dts -F: arch/arm/dts/rk3288-tinker.dtsi -F: arch/arm/dts/rk3288-tinker-s.dts -F: arch/arm/dts/rk3288-tinker-s-u-boot.dtsi +S: Orphan F: arch/arm/dts/rk3288-tinker-u-boot.dtsi F: board/rockchip/tinker_rk3288 F: include/configs/tinker_rk3288.h @@ -13,6 +8,7 @@ F: configs/tinker-rk3288_defconfig TINKER-S-RK3288 M: Michael Trimarchi <michael(a)amarulasolutions.com> S: Maintained +F: arch/arm/dts/rk3288-tinker-s-u-boot.dtsi F: board/rockchip/tinker_rk3288 F: include/configs/tinker_rk3288.h F: configs/tinker-s-rk3288_defconfig diff --git a/configs/chromebit_mickey_defconfig b/configs/chromebit_mickey_defconfig index 874f266dad1b..dd069a2d493c 100644 --- a/configs/chromebit_mickey_defconfig +++ b/configs/chromebit_mickey_defconfig @@ -8,7 +8,7 @@ CONFIG_NR_DRAM_BANKS=1 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x100000 CONFIG_SF_DEFAULT_SPEED=20000000 -CONFIG_DEFAULT_DEVICE_TREE="rk3288-veyron-mickey" +CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3288-veyron-mickey" CONFIG_DM_RESET=y CONFIG_SYS_MONITOR_LEN=614400 CONFIG_ROCKCHIP_RK3288=y @@ -29,7 +29,7 @@ CONFIG_SPL_SPI=y CONFIG_SPL_PAYLOAD="u-boot.img" CONFIG_DEBUG_UART=y CONFIG_USE_PREBOOT=y -CONFIG_DEFAULT_FDT_FILE="rk3288-veyron-mickey.dtb" +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3288-veyron-mickey.dtb" CONFIG_SILENT_CONSOLE=y CONFIG_LOG=y # CONFIG_DISPLAY_CPUINFO is not set diff --git a/configs/chromebook_jerry_defconfig b/configs/chromebook_jerry_defconfig index f40b8e84e39e..e46e675e0144 100644 --- a/configs/chromebook_jerry_defconfig +++ b/configs/chromebook_jerry_defconfig @@ -8,7 +8,7 @@ CONFIG_NR_DRAM_BANKS=1 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x100000 CONFIG_SF_DEFAULT_SPEED=20000000 -CONFIG_DEFAULT_DEVICE_TREE="rk3288-veyron-jerry" +CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3288-veyron-jerry" CONFIG_DM_RESET=y CONFIG_SYS_MONITOR_LEN=614400 CONFIG_ROCKCHIP_RK3288=y @@ -28,7 +28,7 @@ CONFIG_SPL_SPI=y CONFIG_SPL_PAYLOAD="u-boot.img" CONFIG_DEBUG_UART=y CONFIG_USE_PREBOOT=y -CONFIG_DEFAULT_FDT_FILE="rk3288-veyron-jerry.dtb" +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3288-veyron-jerry.dtb" CONFIG_SILENT_CONSOLE=y CONFIG_LOG=y # CONFIG_DISPLAY_CPUINFO is not set diff --git a/configs/chromebook_minnie_defconfig b/configs/chromebook_minnie_defconfig index 2f125ba12adb..acdb45f29c8b 100644 --- a/configs/chromebook_minnie_defconfig +++ b/configs/chromebook_minnie_defconfig @@ -8,7 +8,7 @@ CONFIG_NR_DRAM_BANKS=1 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x100000 CONFIG_SF_DEFAULT_SPEED=20000000 -CONFIG_DEFAULT_DEVICE_TREE="rk3288-veyron-minnie" +CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3288-veyron-minnie" CONFIG_DM_RESET=y CONFIG_SYS_MONITOR_LEN=614400 CONFIG_ROCKCHIP_RK3288=y @@ -29,7 +29,7 @@ CONFIG_SPL_SPI=y CONFIG_SPL_PAYLOAD="u-boot.img" CONFIG_DEBUG_UART=y CONFIG_USE_PREBOOT=y -CONFIG_DEFAULT_FDT_FILE="rk3288-veyron-minnie.dtb" +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3288-veyron-minnie.dtb" CONFIG_SILENT_CONSOLE=y CONFIG_LOG=y # CONFIG_DISPLAY_CPUINFO is not set diff --git a/configs/chromebook_speedy_defconfig b/configs/chromebook_speedy_defconfig index c19b0905d5cf..e258cdfb4819 100644 --- a/configs/chromebook_speedy_defconfig +++ b/configs/chromebook_speedy_defconfig @@ -8,7 +8,7 @@ CONFIG_NR_DRAM_BANKS=1 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x100000 CONFIG_SF_DEFAULT_SPEED=20000000 -CONFIG_DEFAULT_DEVICE_TREE="rk3288-veyron-speedy" +CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3288-veyron-speedy" CONFIG_DM_RESET=y CONFIG_SYS_MONITOR_LEN=614400 CONFIG_ROCKCHIP_RK3288=y @@ -29,7 +29,7 @@ CONFIG_SPL_SPI=y CONFIG_SPL_PAYLOAD="u-boot.img" CONFIG_DEBUG_UART=y CONFIG_USE_PREBOOT=y -CONFIG_DEFAULT_FDT_FILE="rk3288-veyron-speedy.dtb" +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3288-veyron-speedy.dtb" CONFIG_SILENT_CONSOLE=y CONFIG_LOG=y # CONFIG_DISPLAY_CPUINFO is not set diff --git a/configs/evb-rk3288_defconfig b/configs/evb-rk808-rk3288_defconfig similarity index 95% rename from configs/evb-rk3288_defconfig rename to configs/evb-rk808-rk3288_defconfig index ae79efebf57a..c7e48848ebf9 100644 --- a/configs/evb-rk3288_defconfig +++ b/configs/evb-rk808-rk3288_defconfig @@ -9,7 +9,7 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x100000 CONFIG_SF_DEFAULT_SPEED=20000000 CONFIG_ENV_OFFSET=0x3F8000 -CONFIG_DEFAULT_DEVICE_TREE="rk3288-evb" +CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3288-evb-rk808" CONFIG_DM_RESET=y CONFIG_SYS_MONITOR_LEN=614400 CONFIG_ROCKCHIP_RK3288=y @@ -29,7 +29,7 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_SPL_LOAD_FIT=y CONFIG_USE_PREBOOT=y -CONFIG_DEFAULT_FDT_FILE="rk3288-evb-rk808.dtb" +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3288-evb-rk808.dtb" CONFIG_SILENT_CONSOLE=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_SPL_PAD_TO=0x7f8000 diff --git a/configs/firefly-rk3288_defconfig b/configs/firefly-rk3288_defconfig index 00f23174210f..e1cc78f620f1 100644 --- a/configs/firefly-rk3288_defconfig +++ b/configs/firefly-rk3288_defconfig @@ -9,7 +9,7 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x100000 CONFIG_SF_DEFAULT_SPEED=20000000 CONFIG_ENV_OFFSET=0x3F8000 -CONFIG_DEFAULT_DEVICE_TREE="rk3288-firefly" +CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3288-firefly" CONFIG_DM_RESET=y CONFIG_SYS_MONITOR_LEN=614400 CONFIG_ROCKCHIP_RK3288=y @@ -26,7 +26,7 @@ CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_DEBUG_UART=y # CONFIG_ANDROID_BOOT_IMAGE is not set CONFIG_USE_PREBOOT=y -CONFIG_DEFAULT_FDT_FILE="rk3288-firefly.dtb" +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3288-firefly.dtb" CONFIG_SILENT_CONSOLE=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_SPL_PAD_TO=0x7f8000 diff --git a/configs/miqi-rk3288_defconfig b/configs/miqi-rk3288_defconfig index 420a8bd1e798..ca7845a0941a 100644 --- a/configs/miqi-rk3288_defconfig +++ b/configs/miqi-rk3288_defconfig @@ -8,7 +8,7 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x100000 CONFIG_SF_DEFAULT_SPEED=20000000 CONFIG_ENV_OFFSET=0x3F8000 -CONFIG_DEFAULT_DEVICE_TREE="rk3288-miqi" +CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3288-miqi" CONFIG_DM_RESET=y CONFIG_SYS_MONITOR_LEN=614400 CONFIG_ROCKCHIP_RK3288=y @@ -26,7 +26,7 @@ CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_DEBUG_UART=y # CONFIG_ANDROID_BOOT_IMAGE is not set CONFIG_USE_PREBOOT=y -CONFIG_DEFAULT_FDT_FILE="rk3288-miqi.dtb" +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3288-miqi.dtb" CONFIG_SILENT_CONSOLE=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_SPL_PAD_TO=0x7f8000 diff --git a/configs/phycore-rk3288_defconfig b/configs/phycore-rk3288_defconfig index 0f8e999ee3f9..89cfd38980dc 100644 --- a/configs/phycore-rk3288_defconfig +++ b/configs/phycore-rk3288_defconfig @@ -48,7 +48,6 @@ CONFIG_CMD_REGULATOR=y # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set CONFIG_SPL_OF_CONTROL=y -CONFIG_OF_UPSTREAM=y CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y diff --git a/configs/popmetal-rk3288_defconfig b/configs/popmetal-rk3288_defconfig index 1b2fb4a38cd4..c454349d4bc9 100644 --- a/configs/popmetal-rk3288_defconfig +++ b/configs/popmetal-rk3288_defconfig @@ -8,7 +8,7 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x100000 CONFIG_SF_DEFAULT_SPEED=20000000 CONFIG_ENV_OFFSET=0x3F8000 -CONFIG_DEFAULT_DEVICE_TREE="rk3288-popmetal" +CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3288-popmetal" CONFIG_SYS_MONITOR_LEN=614400 CONFIG_ROCKCHIP_RK3288=y CONFIG_SPL_ROCKCHIP_BACK_TO_BROM=y @@ -25,7 +25,7 @@ CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_DEBUG_UART=y # CONFIG_ANDROID_BOOT_IMAGE is not set CONFIG_USE_PREBOOT=y -CONFIG_DEFAULT_FDT_FILE="rk3288-popmetal.dtb" +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3288-popmetal.dtb" CONFIG_SILENT_CONSOLE=y CONFIG_CONSOLE_MUX=y CONFIG_DISPLAY_BOARDINFO_LATE=y diff --git a/configs/rock-pi-n8-rk3288_defconfig b/configs/rock-pi-n8-rk3288_defconfig index dde0b81eee4c..e73c8b4aa041 100644 --- a/configs/rock-pi-n8-rk3288_defconfig +++ b/configs/rock-pi-n8-rk3288_defconfig @@ -10,7 +10,7 @@ CONFIG_NR_DRAM_BANKS=1 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x100000 CONFIG_ENV_OFFSET=0x3F8000 -CONFIG_DEFAULT_DEVICE_TREE="rk3288-rock-pi-n8" +CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3288-rock-pi-n8" CONFIG_DM_RESET=y CONFIG_SYS_MONITOR_LEN=614400 CONFIG_ROCKCHIP_RK3288=y diff --git a/configs/rock2_defconfig b/configs/rock2_defconfig index bff65d1fc414..bbf0c9a39c44 100644 --- a/configs/rock2_defconfig +++ b/configs/rock2_defconfig @@ -8,7 +8,7 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x100000 CONFIG_SF_DEFAULT_SPEED=20000000 CONFIG_ENV_OFFSET=0x3F8000 -CONFIG_DEFAULT_DEVICE_TREE="rk3288-rock2-square" +CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3288-rock2-square" CONFIG_SYS_MONITOR_LEN=614400 CONFIG_ROCKCHIP_RK3288=y CONFIG_SPL_ROCKCHIP_BACK_TO_BROM=y @@ -25,7 +25,7 @@ CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_DEBUG_UART=y # CONFIG_ANDROID_BOOT_IMAGE is not set CONFIG_USE_PREBOOT=y -CONFIG_DEFAULT_FDT_FILE="rk3288-rock2-square.dtb" +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3288-rock2-square.dtb" CONFIG_SILENT_CONSOLE=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y diff --git a/configs/tinker-rk3288_defconfig b/configs/tinker-rk3288_defconfig index 42dbef9c2c30..93085c5217d8 100644 --- a/configs/tinker-rk3288_defconfig +++ b/configs/tinker-rk3288_defconfig @@ -10,7 +10,7 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x100000 CONFIG_SF_DEFAULT_SPEED=20000000 CONFIG_ENV_OFFSET=0x3F8000 -CONFIG_DEFAULT_DEVICE_TREE="rk3288-tinker" +CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3288-tinker" CONFIG_DM_RESET=y CONFIG_SYS_MONITOR_LEN=614400 CONFIG_ROCKCHIP_RK3288=y @@ -27,7 +27,7 @@ CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_DEBUG_UART=y # CONFIG_ANDROID_BOOT_IMAGE is not set CONFIG_USE_PREBOOT=y -CONFIG_DEFAULT_FDT_FILE="rk3288-tinker.dtb" +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3288-tinker.dtb" CONFIG_SILENT_CONSOLE=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_SPL_PAD_TO=0x7f8000 diff --git a/configs/tinker-s-rk3288_defconfig b/configs/tinker-s-rk3288_defconfig index e62a03e066cc..097365345517 100644 --- a/configs/tinker-s-rk3288_defconfig +++ b/configs/tinker-s-rk3288_defconfig @@ -10,7 +10,7 @@ CONFIG_NR_DRAM_BANKS=1 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x100000 CONFIG_SF_DEFAULT_SPEED=20000000 -CONFIG_DEFAULT_DEVICE_TREE="rk3288-tinker-s" +CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3288-tinker-s" CONFIG_DM_RESET=y CONFIG_SYS_MONITOR_LEN=614400 CONFIG_ROCKCHIP_RK3288=y @@ -27,7 +27,7 @@ CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_DEBUG_UART=y # CONFIG_ANDROID_BOOT_IMAGE is not set CONFIG_USE_PREBOOT=y -CONFIG_DEFAULT_FDT_FILE="rk3288-tinker-s.dtb" +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3288-tinker-s.dtb" CONFIG_SILENT_CONSOLE=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_SPL_PAD_TO=0x7f8000 diff --git a/configs/vyasa-rk3288_defconfig b/configs/vyasa-rk3288_defconfig index e75466c1cad9..75d36bd1f78d 100644 --- a/configs/vyasa-rk3288_defconfig +++ b/configs/vyasa-rk3288_defconfig @@ -11,7 +11,7 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x100000 CONFIG_SF_DEFAULT_SPEED=20000000 CONFIG_ENV_OFFSET=0x3F8000 -CONFIG_DEFAULT_DEVICE_TREE="rk3288-vyasa" +CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3288-vyasa" CONFIG_DM_RESET=y CONFIG_SYS_MONITOR_LEN=614400 CONFIG_ROCKCHIP_RK3288=y @@ -26,7 +26,7 @@ CONFIG_DEBUG_UART_BASE=0xff690000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_DEBUG_UART=y CONFIG_USE_PREBOOT=y -CONFIG_DEFAULT_FDT_FILE="rk3288-vyasa.dtb" +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3288-vyasa.dtb" CONFIG_SILENT_CONSOLE=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_SPL_PAD_TO=0x7f8000 diff --git a/doc/board/rockchip/rockchip.rst b/doc/board/rockchip/rockchip.rst index 9bab86d23479..4633b58e6470 100644 --- a/doc/board/rockchip/rockchip.rst +++ b/doc/board/rockchip/rockchip.rst @@ -40,15 +40,16 @@ List of mainline supported Rockchip boards: * rk3229 - Rockchip Evb-RK3229 (evb-rk3229) * rk3288 - - Rockchip Evb-RK3288 (evb-rk3288) + - Rockchip Evb RK808-RK3288 (evb-rk808-rk3288) - Firefly-RK3288 (firefly-rk3288) - MQmaker MiQi (miqi-rk3288) - Phytec RK3288 PCM-947 (phycore-rk3288) - PopMetal-RK3288 (popmetal-rk3288) - Radxa Rock 2 Square (rock2) + - Radxa Rock Pi N8 (rock-pi-n8-rk3288) - Tinker-RK3288 (tinker-rk3288) - Google Jerry (chromebook_jerry) - - Google Mickey (chromebook_mickey) + - Google Mickey (chromebit_mickey) - Google Minnie (chromebook_minnie) - Google Speedy (chromebook_speedy) - Amarula Vyasa-RK3288 (vyasa-rk3288) -- 2.39.5

2 1

[PATCH v3 1/3] phycore_imx8mm: Switch to using env text files
by Yunus Bas 09 Dec '24

09 Dec '24

Move the environment into the board directory and convert header to a txt file. In addition, this patch also applies following changes: - Change default nfsroot path to /srv/nfs due to compliance with Linux FHS 3.0. - Rename specific variables as stated in the bootstd documentation. Renamed variables: fdt_addr => fdt_addr_r fdt_file => fdtfile Signed-off-by: Yunus Bas <y.bas(a)phytec.de> --- Changes in v3: - Removed sd_dev entry - Added Maintainers and reviewers - Added changes description --- .../phytec/phycore_imx8mm/phycore_imx8mm.env | 51 +++++++++++++++++++ include/configs/phycore_imx8mm.h | 46 ----------------- 2 files changed, 51 insertions(+), 46 deletions(-) create mode 100644 board/phytec/phycore_imx8mm/phycore_imx8mm.env diff --git a/board/phytec/phycore_imx8mm/phycore_imx8mm.env b/board/phytec/phycore_imx8mm/phycore_imx8mm.env new file mode 100644 index 00000000000..33a2595fa16 --- /dev/null +++ b/board/phytec/phycore_imx8mm/phycore_imx8mm.env @@ -0,0 +1,51 @@ +console=ttymxc2,115200 +emmc_dev=2 +fdt_addr_r=0x48000000 +fdtfile=CONFIG_DEFAULT_FDT_FILE +image=Image +ip_dyn=yes +loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image} +loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr_r} ${fdtfile} +mmcargs= + setenv bootargs console=${console} + root=/dev/mmcblk${mmcdev}p${mmcroot} rootwait rw +mmcautodetect=yes +mmcboot= + echo Booting from mmc ...; + run mmcargs; + if run loadfdt; then + if test ${dofitboot} = 1; then + booti ${loadaddr} - ${fdt_addr_r} + else + echo WARN: Cannot load the DT; + fi; + fi; +mmcdev=CONFIG_SYS_MMC_ENV_DEV +mmcpart=1 +mmcroot=2 +netargs= + setenv bootargs console=${console} root=/dev/nfs ip=dhcp + nfsroot=${serverip}:${nfsroot},v3,tcp +netboot= + echo Booting from net ...; + if test ${ip_dyn} = yes; then + setenv get_cmd dhcp; + else + setenv get_cmd tftp; + fi; + ${get_cmd} ${loadaddr} ${image}; + run netargs; + if ${get_cmd} ${fdt_addr_r} ${fdtfile}; then + booti ${loadaddr} - ${fdt_addr_r}; + else + echo WARN: Cannot load the DT; + fi; +nfsroot=/srv/nfs +update_bootimg= + mmc dev ${mmcdev}; + if dhcp ${loadaddr} ${update_filepath}/${update_filename}; then + setexpr fw_sz ${filesize} / 0x200; + mmc write ${loadaddr} ${update_offset} ${fw_sz}; + fi; +update_filename=flash.bin +update_offset=0x42 diff --git a/include/configs/phycore_imx8mm.h b/include/configs/phycore_imx8mm.h index e74a3f184c6..20e2ab832ee 100644 --- a/include/configs/phycore_imx8mm.h +++ b/include/configs/phycore_imx8mm.h @@ -20,52 +20,6 @@ /* For RAW image gives a error info not panic */ #endif -#define CFG_EXTRA_ENV_SETTINGS \ - "image=Image\0" \ - "console=ttymxc2,115200\0" \ - "fdt_addr=0x48000000\0" \ - "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \ - "ip_dyn=yes\0" \ - "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ - "mmcpart=1\0" \ - "mmcroot=2\0" \ - "update_offset=0x42\0" \ - "update_filename=flash.bin\0" \ - "update_bootimg=" \ - "mmc dev ${mmcdev} ; " \ - "if dhcp ${loadaddr} ${update_filepath}/${update_filename} ; then " \ - "setexpr fw_sz ${filesize} / 0x200 ; " /* SD block size */ \ - "mmc write ${loadaddr} ${update_offset} ${fw_sz} ; " \ - "fi\0" \ - "mmcautodetect=yes\0" \ - "mmcargs=setenv bootargs console=${console} " \ - "root=/dev/mmcblk${mmcdev}p${mmcroot} rootwait rw\0" \ - "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ - "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ - "mmcboot=echo Booting from mmc ...; " \ - "run mmcargs; " \ - "if run loadfdt; then " \ - "booti ${loadaddr} - ${fdt_addr}; " \ - "else " \ - "echo WARN: Cannot load the DT; " \ - "fi;\0 " \ - "nfsroot=/nfs\0" \ - "netargs=setenv bootargs console=${console} root=/dev/nfs ip=dhcp " \ - "nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ - "netboot=echo Booting from net ...; " \ - "run netargs; " \ - "if test ${ip_dyn} = yes; then " \ - "setenv get_cmd dhcp; " \ - "else " \ - "setenv get_cmd tftp; " \ - "fi; " \ - "${get_cmd} ${loadaddr} ${image}; " \ - "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ - "booti ${loadaddr} - ${fdt_addr}; " \ - "else " \ - "echo WARN: Cannot load the DT; " \ - "fi;\0" \ - /* Link Definitions */ #define CFG_SYS_INIT_RAM_ADDR 0x40000000 -- 2.25.1

2 3

[PATCH 00/11] imx: add i.MX91 and 11x11-EVK support
by Peng Fan (OSS) 09 Dec '24

09 Dec '24

iMX91 is reduced part from iMX93 with part number with some IPs removed [1]. The i.MX 91 family features an Cortex-A55 running at up to 1.4GHz, and supports for LPDDR4 memory. Patch 1-4 are fixes when developing i.MX91 support. Patch 5-11 are to support i.MX91 and 11x11-EVK. CI: https://dev.azure.com/pengfan/uboot-ci/_build/results?buildId=4 Bootlog: U-Boot SPL 2025.01-rc3-00092-gc065e3b6a3ec-dirty (Dec 03 2024 - 18:24:41 +0800) PMIC: Nominal Voltage Mode DDR: 2400MTS Normal Boot Trying to boot from BOOTROM Boot Stage: Primary boot image offset 0x8000, pagesize 0x200, ivt offset 0x0 Load image from 0x4b800 by ROM_API NOTICE: TRDC init done NOTICE: BL31: v2.10.0 (release):lf-6.6.36-2.1.0-rc3-dirty NOTICE: BL31: Built : 13:31:37, Dec 2 2024 U-Boot 2025.01-rc3-00092-gc065e3b6a3ec-dirty (Dec 03 2024 - 18:24:41 +0800) Reset Status: POR CPU: NXP i.MX91(31) Rev1.0 A55 at 1400 MHz CPU: Consumer temperature grade (0C to 95C) Model: NXP i.MX91 11X11 EVK board DRAM: 2 GiB Core: 216 devices, 24 uclasses, devicetree: separate WDT: Started watchdog@42490000 with servicing every 1000ms (40s timeout) MMC: FSL_SDHC: 0, FSL_SDHC: 1 Loading Environment from MMC... Reading from MMC(1)... *** Warning - bad CRC, using default environment In: serial@44380000 Out: serial@44380000 Err: serial@44380000 BuildInfo: - ELE firmware version 2.0.0-64d8ef47 switch to partitions #0, OK mmc1 is current device Net: Warning: ethernet@428a0000 (eth1) using random MAC address - 62:b9:61:81:d0:f8 eth1: ethernet@428a0000 [PRIME] Hit any key to stop autoboot: 0 [1] https://www.nxp.com/products/processors-and-microcontrollers/arm-processors… Signed-off-by: Peng Fan <peng.fan(a)nxp.com> --- Peng Fan (8): gpio: imx_rgpio2p: Move 8ulp_data to data section imx9: trdc: correct DEBUG usage imx9: gpio: include types.h header imx: Add iMX91 support clk: imx93: support i.MX91 pinctrl: imx93: support i.MX91 arm64: dts: add NXP i.MX91 device tree imx: Support i.MX91 11x11 EVK board Ye Li (3): imx93: Update 9x9 part fuses checking clk: imx: clk-fracn-gppll: Add new PLL rate ddr: imx: Add new rates for i.MX91 arch/arm/dts/imx91-11x11-evk-u-boot.dtsi | 195 ++ arch/arm/dts/imx91-u-boot.dtsi | 92 + arch/arm/include/asm/arch-imx/cpu.h | 5 + arch/arm/include/asm/arch-imx9/clock.h | 7 + arch/arm/include/asm/arch-imx9/gpio.h | 2 + arch/arm/include/asm/arch-imx9/imx91_pins.h | 770 ++++++++ arch/arm/include/asm/mach-imx/iomux-v3.h | 2 +- arch/arm/include/asm/mach-imx/sys_proto.h | 6 + arch/arm/mach-imx/imx9/Kconfig | 13 + arch/arm/mach-imx/imx9/clock.c | 37 +- arch/arm/mach-imx/imx9/container.cfg | 6 +- arch/arm/mach-imx/imx9/imximage.cfg | 6 +- arch/arm/mach-imx/imx9/soc.c | 47 +- arch/arm/mach-imx/imx9/trdc.c | 2 +- board/freescale/imx91_evk/Kconfig | 19 + board/freescale/imx91_evk/MAINTAINERS | 7 + board/freescale/imx91_evk/Makefile | 16 + board/freescale/imx91_evk/imx91_evk.c | 33 + board/freescale/imx91_evk/imx91_evk.env | 63 + board/freescale/imx91_evk/lpddr4_timing_1600mts.c | 1995 ++++++++++++++++++++ .../imx91_evk/lpddr4_timing_1600mts_ecc.c | 1995 ++++++++++++++++++++ board/freescale/imx91_evk/lpddr4_timing_2400mts.c | 1995 ++++++++++++++++++++ .../imx91_evk/lpddr4_timing_2400mts_ecc.c | 1995 ++++++++++++++++++++ board/freescale/imx91_evk/spl.c | 167 ++ configs/imx91_11x11_evk_defconfig | 145 ++ configs/imx91_11x11_evk_inline_ecc_defconfig | 146 ++ doc/board/nxp/imx91_11x11_evk.rst | 70 + doc/board/nxp/index.rst | 1 + drivers/clk/imx/clk-fracn-gppll.c | 5 +- drivers/clk/imx/clk-imx93.c | 52 +- drivers/cpu/imx8_cpu.c | 10 + drivers/ddr/imx/phy/ddrphy_utils.c | 8 + drivers/gpio/imx_rgpio2p.c | 2 +- drivers/pinctrl/nxp/pinctrl-imx93.c | 1 + .../include/dt-bindings/clock/imx93-clock.h | 6 +- .../src/arm64/freescale/imx91-11x11-evk.dts | 875 +++++++++ dts/upstream/src/arm64/freescale/imx91-pinfunc.h | 770 ++++++++ dts/upstream/src/arm64/freescale/imx91.dtsi | 70 + include/configs/imx91_evk.h | 21 + 39 files changed, 11617 insertions(+), 40 deletions(-) --- base-commit: 98dd010b311e68b8398428cadf56a6381f7de202 change-id: 20241130-imx91-9de528a1a4f2 Best regards, -- Peng Fan <peng.fan(a)nxp.com>

3 14