June 2023 - U-Boot

[PATCH] mmc: rpmb: realign frames before passing to MMC driver
by Pavel Löbl 14 Jun '23

14 Jun '23

MMC driver requires request and response frame buffers to be properly aligned for DMA transfers. Fix already implemented reallocation for request frame and also add realigment for response frame if needed. Signed-off-by: Pavel Löbl <pavel(a)loebl.cz> --- drivers/mmc/rpmb.c | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/rpmb.c b/drivers/mmc/rpmb.c index b68d98573c..e951f4e9bd 100644 --- a/drivers/mmc/rpmb.c +++ b/drivers/mmc/rpmb.c @@ -482,13 +482,14 @@ int mmc_rpmb_route_frames(struct mmc *mmc, void *req, unsigned long reqlen, */ void *rpmb_data = NULL; int ret; + void *rsp_aligned = rsp; if (reqlen % sizeof(struct s_rpmb) || rsplen % sizeof(struct s_rpmb)) return -EINVAL; if (!IS_ALIGNED((uintptr_t)req, ARCH_DMA_MINALIGN)) { /* Memory alignment is required by MMC driver */ - rpmb_data = malloc(reqlen); + rpmb_data = memalign(ARCH_DMA_MINALIGN, reqlen); if (!rpmb_data) return -ENOMEM; @@ -496,8 +497,20 @@ int mmc_rpmb_route_frames(struct mmc *mmc, void *req, unsigned long reqlen, req = rpmb_data; } + if (!IS_ALIGNED((uintptr_t)rsp_aligned, ARCH_DMA_MINALIGN)) { + rsp_aligned = memalign(ARCH_DMA_MINALIGN, rsplen); + if (!rsp_aligned) + return -ENOMEM; + } + ret = rpmb_route_frames(mmc, req, reqlen / sizeof(struct s_rpmb), - rsp, rsplen / sizeof(struct s_rpmb)); + rsp_aligned, rsplen / sizeof(struct s_rpmb)); + + if (rsp_aligned != rsp) { + memcpy(rsp, rsp_aligned, rsplen); + free(rsp_aligned); + } + free(rpmb_data); return ret; } -- 2.39.2

2 1

[PATCH] mmc: rpmb: poll mmc status after sending rpmb request
by Ji Luo 14 Jun '23

14 Jun '23

polling the mmc status to make sure the rpmb request has been sent and the mmc is not in BUSY state. This avoids potential rpmb request failure during rpmb data write. Signed-off-by: Ji Luo <ji.luo(a)nxp.com> --- drivers/mmc/rpmb.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/mmc/rpmb.c b/drivers/mmc/rpmb.c index b68d98573c..8bf19fd696 100644 --- a/drivers/mmc/rpmb.c +++ b/drivers/mmc/rpmb.c @@ -94,6 +94,7 @@ static int mmc_rpmb_request(struct mmc *mmc, const struct s_rpmb *s, struct mmc_cmd cmd = {0}; struct mmc_data data; struct sdhci_host *host = mmc->priv; + int timeout_ms = 1000; int ret; ret = mmc_set_blockcount(mmc, count, is_rel_write); @@ -123,6 +124,15 @@ static int mmc_rpmb_request(struct mmc *mmc, const struct s_rpmb *s, #endif return 1; } + + /* poll for the ready status */ + if (mmc_poll_for_busy(mmc, timeout_ms)) { +#ifdef CONFIG_MMC_RPMB_TRACE + printf("%s:mmc is busy!\n", __func__); +#endif + return 1; + } + return 0; } static int mmc_rpmb_response(struct mmc *mmc, struct s_rpmb *s, -- 2.25.1

2 1

[PATCH] mmc: Set clock when reverting to safe bus mode
by Marek Vasut 14 Jun '23

14 Jun '23

From: Valentine Barshak <valentine.barshak(a)cogentembedded.com> Set MMC clock when reverting to safe bus mode and speed in case current MMC mode fails. Otherwise, trying out the other modes may fail as well. Reviewed-by: Marek Vasut <marek.vasut+renesas(a)mailbox.org> Signed-off-by: Valentine Barshak <valentine.barshak(a)cogentembedded.com> [hp: fallback to legacy_speed] Signed-off-by: Hai Pham <hai.pham.ud(a)renesas.com> --- Cc: "Ying-Chun Liu (PaulLiu)" <paul.liu(a)linaro.org> Cc: Hai Pham <hai.pham.ud(a)renesas.com> Cc: Jaehoon Chung <jh80.chung(a)samsung.com> Cc: Loic Poulain <loic.poulain(a)linaro.org> Cc: Peng Fan <peng.fan(a)nxp.com> Cc: Simon Glass <sjg(a)chromium.org> Cc: Takeshi Kihara <takeshi.kihara.df(a)renesas.com> --- drivers/mmc/mmc.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index 68a76aa3e94..79d0d37c240 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -2231,6 +2231,7 @@ error: mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_BUS_WIDTH, EXT_CSD_BUS_WIDTH_1); mmc_select_mode(mmc, MMC_LEGACY); + mmc_set_clock(mmc, mmc->legacy_speed, MMC_CLK_ENABLE); mmc_set_bus_width(mmc, 1); } } -- 2.39.2

2 1

[PATCH 1/2] mmc: Introduce mmc_send_stop_transmission()
by Marek Vasut 14 Jun '23

14 Jun '23

From: Hai Pham <hai.pham.ud(a)renesas.com> If a tuning command times out, the card could still be processing it, which will cause problems for recovery. The eMMC specification section 6.6 Data transfer mode (cont’d) claims that CMD12 can be used to stop CMD21: " The relationship between the various data transfer modes is summarized (see Figure 27): - All data read commands can be aborted any time by the stop command (CMD12). The data transfer will terminate and the Device will return to the Transfer State. The read commands are: ... send tuning block (CMD21) .... " Add a function that does that. Based on Linux commit [1] and [2]. [1] e711f0309109 ("mmc: mmc: Introduce mmc_abort_tuning()") [2] 21adc2e45f4e ("mmc: Improve function name when aborting a tuning cmd") Reviewed-by: Takeshi Kihara <takeshi.kihara.df(a)renesas.com> Reviewed-by: Marek Vasut <marek.vasut+renesas(a)mailbox.org> Signed-off-by: Hai Pham <hai.pham.ud(a)renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas(a)mailbox.org> [Marek: Update commit message, quote relevant part of the specification. Rename to mmc_send_stop_transmission(). Remove tuning opcode check, this is controller driver specific. Deduplicate part of mmc_read_blocks() using this function.] --- Cc: "Ying-Chun Liu (PaulLiu)" <paul.liu(a)linaro.org> Cc: Hai Pham <hai.pham.ud(a)renesas.com> Cc: Jaehoon Chung <jh80.chung(a)samsung.com> Cc: Loic Poulain <loic.poulain(a)linaro.org> Cc: Peng Fan <peng.fan(a)nxp.com> Cc: Simon Glass <sjg(a)chromium.org> Cc: Takeshi Kihara <takeshi.kihara.df(a)renesas.com> --- drivers/mmc/mmc.c | 16 ++++++++++++---- include/mmc.h | 2 ++ 2 files changed, 14 insertions(+), 4 deletions(-) diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index 1af6af82e6b..68a76aa3e94 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -398,6 +398,17 @@ int mmc_send_tuning(struct mmc *mmc, u32 opcode, int *cmd_error) } #endif +int mmc_send_stop_transmission(struct mmc *mmc) +{ + struct mmc_cmd cmd; + + cmd.cmdidx = MMC_CMD_STOP_TRANSMISSION; + cmd.cmdarg = 0; + cmd.resp_type = MMC_RSP_R1; + + return mmc_send_cmd(mmc, &cmd, NULL); +} + static int mmc_read_blocks(struct mmc *mmc, void *dst, lbaint_t start, lbaint_t blkcnt) { @@ -425,10 +436,7 @@ static int mmc_read_blocks(struct mmc *mmc, void *dst, lbaint_t start, return 0; if (blkcnt > 1) { - cmd.cmdidx = MMC_CMD_STOP_TRANSMISSION; - cmd.cmdarg = 0; - cmd.resp_type = MMC_RSP_R1b; - if (mmc_send_cmd(mmc, &cmd, NULL)) { + if (mmc_send_stop_transmission(mmc)) { #if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) pr_err("mmc fail to send stop cmd\n"); #endif diff --git a/include/mmc.h b/include/mmc.h index b8fbff150de..a413dc2af4d 100644 --- a/include/mmc.h +++ b/include/mmc.h @@ -558,6 +558,8 @@ int mmc_deferred_probe(struct mmc *mmc); int mmc_reinit(struct mmc *mmc); int mmc_get_b_max(struct mmc *mmc, void *dst, lbaint_t blkcnt); int mmc_hs400_prepare_ddr(struct mmc *mmc); +int mmc_send_stop_transmission(struct mmc *mmc); + #else struct mmc_ops { int (*send_cmd)(struct mmc *mmc, -- 2.39.2

2 2

[PATCH] mmc: Do not read eMMC partition access bits by default on OMAP2PLUS and BCM283X
by Pali Rohár 14 Jun '23

14 Jun '23

OMAP2PLUS and BCM283X mmc controllers do not work correctly with new emmc code which reads partition access bits prior mmc controller reset. So introduce a new config option MMC_ENABLE_PART_ACCESS, which is by default disabled for ARCH_OMAP2PLUS and ARCH_BCM283X; and selected for 32-bit mvebu mmc booting (which requires it). Signed-off-by: Pali Rohár <pali(a)kernel.org> --- arch/arm/mach-mvebu/Kconfig | 1 + drivers/mmc/Kconfig | 12 ++++++++++++ drivers/mmc/mmc.c | 2 ++ 3 files changed, 15 insertions(+) diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig index ac484c73f62d..fe691cd435e7 100644 --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig @@ -353,6 +353,7 @@ config MVEBU_SPL_BOOT_DEVICE_MMC imply SPL_GPIO imply SPL_LIBDISK_SUPPORT imply SPL_MMC + select MMC_ENABLE_PART_ACCESS if SPL_MMC select SUPPORT_EMMC_BOOT if SPL_MMC select SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR if SPL_MMC select SPL_BOOTROM_SUPPORT diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig index de01b9687bad..ea50dfdb62c5 100644 --- a/drivers/mmc/Kconfig +++ b/drivers/mmc/Kconfig @@ -107,6 +107,18 @@ config MMC_HW_PARTITIONING This adds a command and an API to do hardware partitioning on eMMC devices. +config MMC_ENABLE_PART_ACCESS + bool "Support for MMC partition access bits" + default n if ARCH_OMAP2PLUS || ARCH_BCM283X + default y + help + Read partition access bits from partition config register before card reset command + because these bits are reset to default value (User Data Area) during card reset. + This allows us to preserve original value of partition access bits used by the code + which loaded us (for example BootROM) and use it for board specific boot purposes. + . + This is required when U-Boot is using EXT_CSD_EXTRACT_PARTITION_ACCESS macro. + config SUPPORT_EMMC_RPMB bool "Support eMMC replay protected memory block (RPMB)" imply CMD_MMC_RPMB diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index 9915610d82b1..fa3c4d1937c1 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -2864,6 +2864,7 @@ int mmc_get_op_cond(struct mmc *mmc, bool quiet) retry: mmc_set_initial_state(mmc); +#ifdef CONFIG_MMC_ENABLE_PART_ACCESS /* * Read partition access bits from partition config register before card reset command * because these bits are reset to default value (User Data Area) during card reset. @@ -2878,6 +2879,7 @@ retry: ext_csd[EXT_CSD_BOOT_MULT])) mmc->part_config = ext_csd[EXT_CSD_PART_CONF] & PART_ACCESS_MASK; } +#endif /* Reset the Card */ err = mmc_go_idle(mmc); -- 2.20.1

2 2

[RFC] disable NFS support by default
by Peter Robinson 14 Jun '23

14 Jun '23

While NFS is widely used in data centres, and private networks it's quite a nuanced usecase for device firmware. A lot of devices already disable it. Various network protocols should really be opt in, not opt out, because they add extra size and are potential attack vectors from a security PoV. In the NFS case it doesn't really make sense for a lot of devices like tables, SBCs etc. It's also something we don't really want for SystemReady-IR due to security concerns. Signed-off-by: Peter Robinson <pbrobinson(a)gmail.com> --- This is a RFC to start a discussion around things like NFS, with the addistion of old protocols like NFSv1 that were never publicly released [1] we really shouldn't be enabling this by default. I am aware it will likely break the functionality for users that do use the various versions of NFS but it's straight forward to add CMD_NFS as an explicit config. It's for this reason I label the patch as RFC. There was about a 5Kb saving here when I tested a build with pinebook-pro-rk3399. Peter [1] https://en.wikipedia.org/wiki/Network_File_System cmd/Kconfig | 1 - configs/10m50_defconfig | 1 - configs/3c120_defconfig | 1 - configs/CMPC885_defconfig | 1 - configs/CMPCPRO_defconfig | 1 - configs/apalis-tk1_defconfig | 1 - configs/apalis_imx6_defconfig | 1 - configs/apalis_t30_defconfig | 1 - configs/bayleybay_defconfig | 1 - configs/beaver_defconfig | 1 - configs/bitmain_antminer_s9_defconfig | 1 - configs/brppt1_mmc_defconfig | 1 - configs/brppt2_defconfig | 1 - configs/brsmarc1_defconfig | 1 - configs/brxre1_defconfig | 1 - configs/cardhu_defconfig | 1 - configs/cei-tk1-som_defconfig | 1 - configs/cherryhill_defconfig | 1 - configs/chromebook_link64_defconfig | 1 - configs/chromebook_link_defconfig | 1 - configs/chromebook_samus_defconfig | 1 - configs/chromebox_panther_defconfig | 1 - configs/cm_t43_defconfig | 1 - configs/colibri_imx6_defconfig | 1 - configs/colibri_t20_defconfig | 1 - configs/colibri_t30_defconfig | 1 - configs/colibri_vf_defconfig | 1 - configs/conga-qeval20-qa3-e3845-internal-uart_defconfig | 1 - configs/conga-qeval20-qa3-e3845_defconfig | 1 - configs/coreboot64_defconfig | 1 - configs/coreboot_defconfig | 1 - configs/corstone1000_defconfig | 1 - configs/cougarcanyon2_defconfig | 1 - configs/crownbay_defconfig | 1 - configs/dalmore_defconfig | 1 - configs/dfi-bt700-q7x-151_defconfig | 1 - configs/edison_defconfig | 1 - configs/efi-x86_payload32_defconfig | 1 - configs/efi-x86_payload64_defconfig | 1 - configs/galileo_defconfig | 1 - configs/gazerbeam_defconfig | 1 - configs/ge_bx50v3_defconfig | 1 - configs/harmony_defconfig | 1 - configs/jetson-tk1_defconfig | 1 - configs/malta64_defconfig | 1 - configs/malta64el_defconfig | 1 - configs/malta_defconfig | 1 - configs/maltael_defconfig | 1 - configs/medcom-wide_defconfig | 1 - configs/minnowmax_defconfig | 1 - configs/mscc_jr2_defconfig | 1 - configs/mscc_luton_defconfig | 1 - configs/mscc_ocelot_defconfig | 1 - configs/mscc_serval_defconfig | 1 - configs/mscc_servalt_defconfig | 1 - configs/mt7620_mt7530_rfb_defconfig | 1 - configs/mt7620_rfb_defconfig | 1 - configs/mt7621_nand_rfb_defconfig | 1 - configs/mt7621_rfb_defconfig | 1 - configs/mt7623a_unielec_u7623_02_defconfig | 1 - configs/mt7623n_bpir2_defconfig | 1 - configs/mt7628_rfb_defconfig | 1 - configs/mt7629_rfb_defconfig | 1 - configs/nyan-big_defconfig | 1 - configs/odroid_defconfig | 1 - configs/omap4_panda_defconfig | 1 - configs/omap4_sdp4430_defconfig | 1 - configs/p2371-0000_defconfig | 1 - configs/p2371-2180_defconfig | 1 - configs/p2571_defconfig | 1 - configs/p2771-0000-000_defconfig | 1 - configs/p2771-0000-500_defconfig | 1 - configs/p3450-0000_defconfig | 1 - configs/paz00_defconfig | 1 - configs/plutux_defconfig | 1 - configs/qemu-x86_64_defconfig | 1 - configs/qemu-x86_defconfig | 1 - configs/seaboard_defconfig | 1 - configs/smdkv310_defconfig | 1 - configs/sniper_defconfig | 1 - configs/socrates_defconfig | 1 - configs/som-db5800-som-6867_defconfig | 1 - configs/tec-ng_defconfig | 1 - configs/tec_defconfig | 1 - configs/theadorable-x86-conga-qa3-e3845-pcie-x4_defconfig | 1 - configs/theadorable-x86-conga-qa3-e3845_defconfig | 1 - configs/theadorable-x86-dfi-bt700_defconfig | 1 - configs/trimslice_defconfig | 1 - configs/venice2_defconfig | 1 - configs/ventana_defconfig | 1 - configs/vexpress_ca9x4_defconfig | 1 - 91 files changed, 91 deletions(-) diff --git a/cmd/Kconfig b/cmd/Kconfig index 365371fb511..a193929cec4 100644 --- a/cmd/Kconfig +++ b/cmd/Kconfig @@ -1848,7 +1848,6 @@ config CMD_RARP config CMD_NFS bool "nfs" - default y help Boot image via network using NFS protocol. diff --git a/configs/10m50_defconfig b/configs/10m50_defconfig index 54a67c5aa98..b76f31b009f 100644 --- a/configs/10m50_defconfig +++ b/configs/10m50_defconfig @@ -26,7 +26,6 @@ CONFIG_CMD_GPIO=y # CONFIG_CMD_ITEST is not set CONFIG_CMD_DHCP=y CONFIG_BOOTP_BOOTFILESIZE=y -# CONFIG_CMD_NFS is not set CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_ENV_OVERWRITE=y diff --git a/configs/3c120_defconfig b/configs/3c120_defconfig index fc73c0613d0..13da353d7eb 100644 --- a/configs/3c120_defconfig +++ b/configs/3c120_defconfig @@ -26,7 +26,6 @@ CONFIG_CMD_GPIO=y # CONFIG_CMD_ITEST is not set CONFIG_CMD_DHCP=y CONFIG_BOOTP_BOOTFILESIZE=y -# CONFIG_CMD_NFS is not set CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_ENV_OVERWRITE=y diff --git a/configs/CMPC885_defconfig b/configs/CMPC885_defconfig index f5bc6d6c004..54873daa156 100644 --- a/configs/CMPC885_defconfig +++ b/configs/CMPC885_defconfig @@ -51,7 +51,6 @@ CONFIG_CMD_ASKENV=y CONFIG_CMD_MTD=y CONFIG_CMD_NAND=y CONFIG_CMD_DHCP=y -# CONFIG_CMD_NFS is not set CONFIG_CMD_MII=y CONFIG_MII_INIT=y CONFIG_CMD_PING=y diff --git a/configs/CMPCPRO_defconfig b/configs/CMPCPRO_defconfig index 80913e653be..d817274a936 100644 --- a/configs/CMPCPRO_defconfig +++ b/configs/CMPCPRO_defconfig @@ -136,7 +136,6 @@ CONFIG_CMD_MTD=y CONFIG_CMD_NAND=y CONFIG_CMD_DHCP=y CONFIG_BOOTP_BOOTFILESIZE=y -# CONFIG_CMD_NFS is not set CONFIG_CMD_MII=y CONFIG_CMD_PING=y # CONFIG_CMD_SLEEP is not set diff --git a/configs/apalis-tk1_defconfig b/configs/apalis-tk1_defconfig index 36d28a249cd..fda85c2d6ae 100644 --- a/configs/apalis-tk1_defconfig +++ b/configs/apalis-tk1_defconfig @@ -43,7 +43,6 @@ CONFIG_CMD_MMC=y CONFIG_CMD_PCI=y CONFIG_CMD_USB=y CONFIG_CMD_USB_MASS_STORAGE=y -# CONFIG_CMD_NFS is not set CONFIG_CMD_TIME=y CONFIG_CMD_EXT4_WRITE=y # CONFIG_SPL_DOS_PARTITION is not set diff --git a/configs/apalis_imx6_defconfig b/configs/apalis_imx6_defconfig index d7342c4968b..eff4039b008 100644 --- a/configs/apalis_imx6_defconfig +++ b/configs/apalis_imx6_defconfig @@ -65,7 +65,6 @@ CONFIG_CMD_MMC=y CONFIG_CMD_USB=y CONFIG_CMD_USB_SDP=y CONFIG_CMD_USB_MASS_STORAGE=y -# CONFIG_CMD_NFS is not set CONFIG_CMD_BOOTCOUNT=y CONFIG_CMD_CACHE=y CONFIG_CMD_TIME=y diff --git a/configs/apalis_t30_defconfig b/configs/apalis_t30_defconfig index 516552584c7..83aab2450be 100644 --- a/configs/apalis_t30_defconfig +++ b/configs/apalis_t30_defconfig @@ -38,7 +38,6 @@ CONFIG_CMD_MMC=y CONFIG_CMD_PCI=y CONFIG_CMD_USB=y CONFIG_CMD_USB_MASS_STORAGE=y -# CONFIG_CMD_NFS is not set CONFIG_CMD_EXT4_WRITE=y # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set diff --git a/configs/bayleybay_defconfig b/configs/bayleybay_defconfig index 4e59d513cdc..a44c9b714be 100644 --- a/configs/bayleybay_defconfig +++ b/configs/bayleybay_defconfig @@ -37,7 +37,6 @@ CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_BOOTP_BOOTFILESIZE=y -# CONFIG_CMD_NFS is not set CONFIG_CMD_PING=y CONFIG_CMD_TIME=y CONFIG_CMD_BOOTSTAGE=y diff --git a/configs/beaver_defconfig b/configs/beaver_defconfig index 3820a333ecb..0d8a74be7aa 100644 --- a/configs/beaver_defconfig +++ b/configs/beaver_defconfig @@ -38,7 +38,6 @@ CONFIG_CMD_SPI=y CONFIG_CMD_USB=y CONFIG_CMD_USB_MASS_STORAGE=y # CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NFS is not set CONFIG_CMD_EXT4_WRITE=y # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set diff --git a/configs/bitmain_antminer_s9_defconfig b/configs/bitmain_antminer_s9_defconfig index c38ba15cd03..3995d41ce1b 100644 --- a/configs/bitmain_antminer_s9_defconfig +++ b/configs/bitmain_antminer_s9_defconfig @@ -55,7 +55,6 @@ CONFIG_CMD_PART=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_BOOTP_MAY_FAIL=y -# CONFIG_CMD_NFS is not set CONFIG_SYS_DISABLE_AUTOLOAD=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/brppt1_mmc_defconfig b/configs/brppt1_mmc_defconfig index 2c9b0662159..653620263cd 100644 --- a/configs/brppt1_mmc_defconfig +++ b/configs/brppt1_mmc_defconfig @@ -64,7 +64,6 @@ CONFIG_CMD_USB=y # CONFIG_CMD_ITEST is not set CONFIG_CMD_DHCP=y CONFIG_BOOTP_MAY_FAIL=y -# CONFIG_CMD_NFS is not set CONFIG_SYS_DISABLE_AUTOLOAD=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/brppt2_defconfig b/configs/brppt2_defconfig index 00ef3d9908e..05ee4c5797e 100644 --- a/configs/brppt2_defconfig +++ b/configs/brppt2_defconfig @@ -56,7 +56,6 @@ CONFIG_CMD_MMC=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_BOOTP_MAY_FAIL=y -# CONFIG_CMD_NFS is not set CONFIG_SYS_DISABLE_AUTOLOAD=y CONFIG_CMD_MII=y CONFIG_CMD_CACHE=y diff --git a/configs/brsmarc1_defconfig b/configs/brsmarc1_defconfig index 1e55ed7c60d..94943fccf1a 100644 --- a/configs/brsmarc1_defconfig +++ b/configs/brsmarc1_defconfig @@ -73,7 +73,6 @@ CONFIG_CMD_USB=y # CONFIG_CMD_ITEST is not set CONFIG_CMD_DHCP=y CONFIG_BOOTP_MAY_FAIL=y -# CONFIG_CMD_NFS is not set CONFIG_SYS_DISABLE_AUTOLOAD=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/brxre1_defconfig b/configs/brxre1_defconfig index 1c437e9743c..b50aef0aad9 100644 --- a/configs/brxre1_defconfig +++ b/configs/brxre1_defconfig @@ -63,7 +63,6 @@ CONFIG_CMD_USB=y # CONFIG_CMD_ITEST is not set CONFIG_CMD_DHCP=y CONFIG_BOOTP_MAY_FAIL=y -# CONFIG_CMD_NFS is not set CONFIG_SYS_DISABLE_AUTOLOAD=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/cardhu_defconfig b/configs/cardhu_defconfig index 00fea793f92..4fe4621f037 100644 --- a/configs/cardhu_defconfig +++ b/configs/cardhu_defconfig @@ -35,7 +35,6 @@ CONFIG_CMD_PCI=y CONFIG_CMD_SPI=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NFS is not set CONFIG_CMD_EXT4_WRITE=y # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set diff --git a/configs/cei-tk1-som_defconfig b/configs/cei-tk1-som_defconfig index c00e6bec5a3..b920ac2ae40 100644 --- a/configs/cei-tk1-som_defconfig +++ b/configs/cei-tk1-som_defconfig @@ -41,7 +41,6 @@ CONFIG_CMD_SPI=y CONFIG_CMD_USB=y CONFIG_CMD_USB_MASS_STORAGE=y # CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NFS is not set CONFIG_CMD_EXT4_WRITE=y # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set diff --git a/configs/cherryhill_defconfig b/configs/cherryhill_defconfig index 4137b1c77e9..00799715e8f 100644 --- a/configs/cherryhill_defconfig +++ b/configs/cherryhill_defconfig @@ -28,7 +28,6 @@ CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_BOOTP_BOOTFILESIZE=y -# CONFIG_CMD_NFS is not set CONFIG_CMD_PING=y CONFIG_CMD_TIME=y CONFIG_CMD_EXT2=y diff --git a/configs/chromebook_link64_defconfig b/configs/chromebook_link64_defconfig index 8c75d654290..558609e13d6 100644 --- a/configs/chromebook_link64_defconfig +++ b/configs/chromebook_link64_defconfig @@ -50,7 +50,6 @@ CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_BOOTP_BOOTFILESIZE=y -# CONFIG_CMD_NFS is not set CONFIG_CMD_PING=y CONFIG_CMD_TIME=y CONFIG_CMD_BOOTSTAGE=y diff --git a/configs/chromebook_link_defconfig b/configs/chromebook_link_defconfig index 3098857d6e1..96c26f1c377 100644 --- a/configs/chromebook_link_defconfig +++ b/configs/chromebook_link_defconfig @@ -37,7 +37,6 @@ CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_BOOTP_BOOTFILESIZE=y -# CONFIG_CMD_NFS is not set CONFIG_CMD_PING=y CONFIG_CMD_TIME=y CONFIG_CMD_SOUND=y diff --git a/configs/chromebook_samus_defconfig b/configs/chromebook_samus_defconfig index 0d20891d2bc..4019c169a4c 100644 --- a/configs/chromebook_samus_defconfig +++ b/configs/chromebook_samus_defconfig @@ -39,7 +39,6 @@ CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_BOOTP_BOOTFILESIZE=y -# CONFIG_CMD_NFS is not set CONFIG_CMD_PING=y CONFIG_CMD_TIME=y CONFIG_CMD_SOUND=y diff --git a/configs/chromebox_panther_defconfig b/configs/chromebox_panther_defconfig index 96c739cbfbc..f050d066be4 100644 --- a/configs/chromebox_panther_defconfig +++ b/configs/chromebox_panther_defconfig @@ -32,7 +32,6 @@ CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_BOOTP_BOOTFILESIZE=y -# CONFIG_CMD_NFS is not set CONFIG_CMD_PING=y CONFIG_CMD_TIME=y CONFIG_CMD_BOOTSTAGE=y diff --git a/configs/cm_t43_defconfig b/configs/cm_t43_defconfig index a307e83d1d4..12d010ab64b 100644 --- a/configs/cm_t43_defconfig +++ b/configs/cm_t43_defconfig @@ -62,7 +62,6 @@ CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_SPI=y CONFIG_CMD_USB=y -# CONFIG_CMD_NFS is not set CONFIG_SYS_DISABLE_AUTOLOAD=y CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_MTDPARTS=y diff --git a/configs/colibri_imx6_defconfig b/configs/colibri_imx6_defconfig index e25cde9e5fa..3e193349e23 100644 --- a/configs/colibri_imx6_defconfig +++ b/configs/colibri_imx6_defconfig @@ -64,7 +64,6 @@ CONFIG_CMD_MMC=y CONFIG_CMD_USB=y CONFIG_CMD_USB_SDP=y CONFIG_CMD_USB_MASS_STORAGE=y -# CONFIG_CMD_NFS is not set CONFIG_CMD_BOOTCOUNT=y CONFIG_CMD_CACHE=y CONFIG_CMD_TIME=y diff --git a/configs/colibri_t20_defconfig b/configs/colibri_t20_defconfig index cdf9e8b1d01..eb2e202f6f2 100644 --- a/configs/colibri_t20_defconfig +++ b/configs/colibri_t20_defconfig @@ -36,7 +36,6 @@ CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_USB=y CONFIG_CMD_USB_MASS_STORAGE=y -# CONFIG_CMD_NFS is not set CONFIG_CMD_CACHE=y CONFIG_CMD_PMIC=y CONFIG_CMD_REGULATOR=y diff --git a/configs/colibri_t30_defconfig b/configs/colibri_t30_defconfig index fed867a8eb2..8098ff7abc1 100644 --- a/configs/colibri_t30_defconfig +++ b/configs/colibri_t30_defconfig @@ -36,7 +36,6 @@ CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_USB=y CONFIG_CMD_USB_MASS_STORAGE=y -# CONFIG_CMD_NFS is not set CONFIG_CMD_EXT4_WRITE=y # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set diff --git a/configs/colibri_vf_defconfig b/configs/colibri_vf_defconfig index c47bfc801a2..4d4d0e4aaf4 100644 --- a/configs/colibri_vf_defconfig +++ b/configs/colibri_vf_defconfig @@ -51,7 +51,6 @@ CONFIG_CMD_USB=y CONFIG_CMD_USB_MASS_STORAGE=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y -# CONFIG_CMD_NFS is not set CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_EXT4=y diff --git a/configs/conga-qeval20-qa3-e3845-internal-uart_defconfig b/configs/conga-qeval20-qa3-e3845-internal-uart_defconfig index 14f00b6212e..656d575998c 100644 --- a/configs/conga-qeval20-qa3-e3845-internal-uart_defconfig +++ b/configs/conga-qeval20-qa3-e3845-internal-uart_defconfig @@ -44,7 +44,6 @@ CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_BOOTP_BOOTFILESIZE=y -# CONFIG_CMD_NFS is not set CONFIG_CMD_PING=y CONFIG_CMD_TIME=y CONFIG_CMD_BOOTSTAGE=y diff --git a/configs/conga-qeval20-qa3-e3845_defconfig b/configs/conga-qeval20-qa3-e3845_defconfig index 613dcd3ca59..54dc59e8a13 100644 --- a/configs/conga-qeval20-qa3-e3845_defconfig +++ b/configs/conga-qeval20-qa3-e3845_defconfig @@ -40,7 +40,6 @@ CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_BOOTP_BOOTFILESIZE=y -# CONFIG_CMD_NFS is not set CONFIG_CMD_PING=y CONFIG_CMD_TIME=y CONFIG_CMD_BOOTSTAGE=y diff --git a/configs/coreboot64_defconfig b/configs/coreboot64_defconfig index 60a1924e9e5..8aadaa68c27 100644 --- a/configs/coreboot64_defconfig +++ b/configs/coreboot64_defconfig @@ -30,7 +30,6 @@ CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_BOOTP_BOOTFILESIZE=y -# CONFIG_CMD_NFS is not set CONFIG_CMD_PING=y CONFIG_CMD_TIME=y CONFIG_CMD_SOUND=y diff --git a/configs/coreboot_defconfig b/configs/coreboot_defconfig index 058caf008f9..0f3512d23c6 100644 --- a/configs/coreboot_defconfig +++ b/configs/coreboot_defconfig @@ -32,7 +32,6 @@ CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_BOOTP_BOOTFILESIZE=y -# CONFIG_CMD_NFS is not set CONFIG_CMD_PING=y CONFIG_CMD_TIME=y CONFIG_CMD_SOUND=y diff --git a/configs/corstone1000_defconfig b/configs/corstone1000_defconfig index 2d391048cd6..112d502e91f 100644 --- a/configs/corstone1000_defconfig +++ b/configs/corstone1000_defconfig @@ -30,7 +30,6 @@ CONFIG_CMD_LOADM=y # CONFIG_CMD_LOADS is not set CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NFS is not set CONFIG_CMD_CACHE=y CONFIG_CMD_RTC=y CONFIG_CMD_TIME=y diff --git a/configs/cougarcanyon2_defconfig b/configs/cougarcanyon2_defconfig index 47834bb6fef..da5ff5573d0 100644 --- a/configs/cougarcanyon2_defconfig +++ b/configs/cougarcanyon2_defconfig @@ -31,7 +31,6 @@ CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_BOOTP_BOOTFILESIZE=y -# CONFIG_CMD_NFS is not set CONFIG_CMD_PING=y CONFIG_CMD_TIME=y CONFIG_CMD_EXT2=y diff --git a/configs/crownbay_defconfig b/configs/crownbay_defconfig index 69ad017f987..70e1a50a244 100644 --- a/configs/crownbay_defconfig +++ b/configs/crownbay_defconfig @@ -33,7 +33,6 @@ CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_BOOTP_BOOTFILESIZE=y -# CONFIG_CMD_NFS is not set CONFIG_CMD_PING=y CONFIG_CMD_TIME=y CONFIG_CMD_SOUND=y diff --git a/configs/dalmore_defconfig b/configs/dalmore_defconfig index 936787bb39c..92f4436eebd 100644 --- a/configs/dalmore_defconfig +++ b/configs/dalmore_defconfig @@ -36,7 +36,6 @@ CONFIG_CMD_SPI=y CONFIG_CMD_USB=y CONFIG_CMD_USB_MASS_STORAGE=y # CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NFS is not set CONFIG_CMD_EXT4_WRITE=y # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set diff --git a/configs/dfi-bt700-q7x-151_defconfig b/configs/dfi-bt700-q7x-151_defconfig index 14e6e6c2d84..9313e7fbd12 100644 --- a/configs/dfi-bt700-q7x-151_defconfig +++ b/configs/dfi-bt700-q7x-151_defconfig @@ -38,7 +38,6 @@ CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_BOOTP_BOOTFILESIZE=y -# CONFIG_CMD_NFS is not set CONFIG_CMD_PING=y CONFIG_CMD_TIME=y CONFIG_CMD_BOOTSTAGE=y diff --git a/configs/edison_defconfig b/configs/edison_defconfig index 00342aace9a..8692a8a9995 100644 --- a/configs/edison_defconfig +++ b/configs/edison_defconfig @@ -28,7 +28,6 @@ CONFIG_CMD_DFU=y CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y CONFIG_CMD_PART=y -# CONFIG_CMD_NFS is not set CONFIG_CMD_TIMER=y CONFIG_CMD_HASH=y CONFIG_CMD_EXT4=y diff --git a/configs/efi-x86_payload32_defconfig b/configs/efi-x86_payload32_defconfig index a5c629b46f3..4149eea6cf6 100644 --- a/configs/efi-x86_payload32_defconfig +++ b/configs/efi-x86_payload32_defconfig @@ -25,7 +25,6 @@ CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_BOOTP_BOOTFILESIZE=y -# CONFIG_CMD_NFS is not set CONFIG_CMD_PING=y CONFIG_CMD_TIME=y CONFIG_CMD_EXT2=y diff --git a/configs/efi-x86_payload64_defconfig b/configs/efi-x86_payload64_defconfig index 5cde04a5ac9..d41f73cccfc 100644 --- a/configs/efi-x86_payload64_defconfig +++ b/configs/efi-x86_payload64_defconfig @@ -25,7 +25,6 @@ CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_BOOTP_BOOTFILESIZE=y -# CONFIG_CMD_NFS is not set CONFIG_CMD_PING=y CONFIG_CMD_TIME=y CONFIG_CMD_EXT2=y diff --git a/configs/galileo_defconfig b/configs/galileo_defconfig index 0d2ebdab926..c6d989ea6ef 100644 --- a/configs/galileo_defconfig +++ b/configs/galileo_defconfig @@ -29,7 +29,6 @@ CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_BOOTP_BOOTFILESIZE=y -# CONFIG_CMD_NFS is not set CONFIG_CMD_PING=y CONFIG_CMD_TIME=y CONFIG_CMD_EXT2=y diff --git a/configs/gazerbeam_defconfig b/configs/gazerbeam_defconfig index c8c8469d8a6..7901a195aa7 100644 --- a/configs/gazerbeam_defconfig +++ b/configs/gazerbeam_defconfig @@ -123,7 +123,6 @@ CONFIG_SYS_LOADS_BAUD_CHANGE=y CONFIG_CMD_MMC=y CONFIG_CMD_AXI=y # CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NFS is not set CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_CACHE=y diff --git a/configs/ge_bx50v3_defconfig b/configs/ge_bx50v3_defconfig index f005e91e0bc..2ef560ccaa4 100644 --- a/configs/ge_bx50v3_defconfig +++ b/configs/ge_bx50v3_defconfig @@ -34,7 +34,6 @@ CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_PCI=y -# CONFIG_CMD_NFS is not set CONFIG_CMD_BMP=y CONFIG_CMD_BOOTCOUNT=y CONFIG_CMD_CACHE=y diff --git a/configs/harmony_defconfig b/configs/harmony_defconfig index b1d9399b860..8b49505a650 100644 --- a/configs/harmony_defconfig +++ b/configs/harmony_defconfig @@ -31,7 +31,6 @@ CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NFS is not set CONFIG_CMD_PMIC=y CONFIG_CMD_REGULATOR=y CONFIG_CMD_EXT4_WRITE=y diff --git a/configs/jetson-tk1_defconfig b/configs/jetson-tk1_defconfig index b2a39e0c844..d8086281582 100644 --- a/configs/jetson-tk1_defconfig +++ b/configs/jetson-tk1_defconfig @@ -40,7 +40,6 @@ CONFIG_CMD_SPI=y CONFIG_CMD_USB=y CONFIG_CMD_USB_MASS_STORAGE=y # CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NFS is not set CONFIG_CMD_EXT4_WRITE=y # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set diff --git a/configs/malta64_defconfig b/configs/malta64_defconfig index 03de1616840..a69e1934fe8 100644 --- a/configs/malta64_defconfig +++ b/configs/malta64_defconfig @@ -26,7 +26,6 @@ CONFIG_CMD_IDE=y CONFIG_CMD_PCI=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y -# CONFIG_CMD_NFS is not set CONFIG_CMD_PING=y CONFIG_CMD_DATE=y # CONFIG_ISO_PARTITION is not set diff --git a/configs/malta64el_defconfig b/configs/malta64el_defconfig index 3ea9fa9857e..21a291d341c 100644 --- a/configs/malta64el_defconfig +++ b/configs/malta64el_defconfig @@ -28,7 +28,6 @@ CONFIG_CMD_IDE=y CONFIG_CMD_PCI=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y -# CONFIG_CMD_NFS is not set CONFIG_CMD_PING=y CONFIG_CMD_DATE=y # CONFIG_ISO_PARTITION is not set diff --git a/configs/malta_defconfig b/configs/malta_defconfig index 317b422a6b6..8c76ebbb155 100644 --- a/configs/malta_defconfig +++ b/configs/malta_defconfig @@ -25,7 +25,6 @@ CONFIG_CMD_IDE=y CONFIG_CMD_PCI=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y -# CONFIG_CMD_NFS is not set CONFIG_CMD_PING=y CONFIG_CMD_DATE=y # CONFIG_ISO_PARTITION is not set diff --git a/configs/maltael_defconfig b/configs/maltael_defconfig index 3e4d2beda2f..4abd3b15580 100644 --- a/configs/maltael_defconfig +++ b/configs/maltael_defconfig @@ -27,7 +27,6 @@ CONFIG_CMD_IDE=y CONFIG_CMD_PCI=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y -# CONFIG_CMD_NFS is not set CONFIG_CMD_PING=y CONFIG_CMD_DATE=y # CONFIG_ISO_PARTITION is not set diff --git a/configs/medcom-wide_defconfig b/configs/medcom-wide_defconfig index 47fcf1574e4..e99bb8f5b52 100644 --- a/configs/medcom-wide_defconfig +++ b/configs/medcom-wide_defconfig @@ -31,7 +31,6 @@ CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NFS is not set CONFIG_CMD_PMIC=y CONFIG_CMD_REGULATOR=y CONFIG_CMD_EXT4_WRITE=y diff --git a/configs/minnowmax_defconfig b/configs/minnowmax_defconfig index 6082b8d70d6..8347a9dcecf 100644 --- a/configs/minnowmax_defconfig +++ b/configs/minnowmax_defconfig @@ -43,7 +43,6 @@ CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_BOOTP_BOOTFILESIZE=y -# CONFIG_CMD_NFS is not set CONFIG_CMD_PING=y CONFIG_CMD_TIME=y CONFIG_CMD_BOOTSTAGE=y diff --git a/configs/mscc_jr2_defconfig b/configs/mscc_jr2_defconfig index b30b804dbf2..e3ff906098a 100644 --- a/configs/mscc_jr2_defconfig +++ b/configs/mscc_jr2_defconfig @@ -44,7 +44,6 @@ CONFIG_CMD_GPIO=y CONFIG_CMD_SPI=y CONFIG_CMD_DHCP=y # CONFIG_NET_TFTP_VARS is not set -# CONFIG_CMD_NFS is not set CONFIG_CMD_PING=y CONFIG_CMD_MTDPARTS=y CONFIG_MTDIDS_DEFAULT="nor0=spi_flash" diff --git a/configs/mscc_luton_defconfig b/configs/mscc_luton_defconfig index 9a1e0c3e064..e811bc97e1f 100644 --- a/configs/mscc_luton_defconfig +++ b/configs/mscc_luton_defconfig @@ -46,7 +46,6 @@ CONFIG_CMD_GPIO=y CONFIG_CMD_SPI=y CONFIG_CMD_DHCP=y # CONFIG_NET_TFTP_VARS is not set -# CONFIG_CMD_NFS is not set CONFIG_CMD_PING=y CONFIG_CMD_TIME=y CONFIG_CMD_MTDPARTS=y diff --git a/configs/mscc_ocelot_defconfig b/configs/mscc_ocelot_defconfig index a372b21f66b..f3246f22196 100644 --- a/configs/mscc_ocelot_defconfig +++ b/configs/mscc_ocelot_defconfig @@ -44,7 +44,6 @@ CONFIG_CMD_MTD=y CONFIG_CMD_SPI=y CONFIG_CMD_DHCP=y # CONFIG_NET_TFTP_VARS is not set -# CONFIG_CMD_NFS is not set CONFIG_CMD_PING=y CONFIG_CMD_MTDPARTS=y CONFIG_MTDIDS_DEFAULT="nor0=spi_flash" diff --git a/configs/mscc_serval_defconfig b/configs/mscc_serval_defconfig index 055ed68305a..4ff7933717b 100644 --- a/configs/mscc_serval_defconfig +++ b/configs/mscc_serval_defconfig @@ -41,7 +41,6 @@ CONFIG_CMD_GPIO=y CONFIG_CMD_SPI=y CONFIG_CMD_DHCP=y # CONFIG_NET_TFTP_VARS is not set -# CONFIG_CMD_NFS is not set CONFIG_CMD_PING=y CONFIG_CMD_MTDPARTS=y CONFIG_MTDIDS_DEFAULT="nor0=spi_flash" diff --git a/configs/mscc_servalt_defconfig b/configs/mscc_servalt_defconfig index 6e225a69389..5f6ed73c2ed 100644 --- a/configs/mscc_servalt_defconfig +++ b/configs/mscc_servalt_defconfig @@ -40,7 +40,6 @@ CONFIG_CMD_GPIO=y CONFIG_CMD_SPI=y CONFIG_CMD_DHCP=y # CONFIG_NET_TFTP_VARS is not set -# CONFIG_CMD_NFS is not set CONFIG_CMD_PING=y CONFIG_CMD_MTDPARTS=y CONFIG_MTDIDS_DEFAULT="nor0=spi_flash" diff --git a/configs/mt7620_mt7530_rfb_defconfig b/configs/mt7620_mt7530_rfb_defconfig index 96f10926b13..af9df547d57 100644 --- a/configs/mt7620_mt7530_rfb_defconfig +++ b/configs/mt7620_mt7530_rfb_defconfig @@ -38,7 +38,6 @@ CONFIG_SYS_BOOTM_LEN=0x1000000 CONFIG_CMD_GPIO=y # CONFIG_CMD_LOADS is not set CONFIG_CMD_SPI=y -# CONFIG_CMD_NFS is not set CONFIG_CMD_MII=y # CONFIG_CMD_MDIO is not set CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clocks clock-names interrupt-parent interrupts resets reset-names" diff --git a/configs/mt7620_rfb_defconfig b/configs/mt7620_rfb_defconfig index d96da91df36..fe57fd1892d 100644 --- a/configs/mt7620_rfb_defconfig +++ b/configs/mt7620_rfb_defconfig @@ -39,7 +39,6 @@ CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y CONFIG_CMD_SPI=y CONFIG_CMD_USB=y -# CONFIG_CMD_NFS is not set CONFIG_CMD_MII=y # CONFIG_CMD_MDIO is not set CONFIG_CMD_FAT=y diff --git a/configs/mt7621_nand_rfb_defconfig b/configs/mt7621_nand_rfb_defconfig index 5291bb300e4..368bf800968 100644 --- a/configs/mt7621_nand_rfb_defconfig +++ b/configs/mt7621_nand_rfb_defconfig @@ -49,7 +49,6 @@ CONFIG_CMD_MTD=y CONFIG_CMD_PART=y # CONFIG_CMD_PINMUX is not set CONFIG_CMD_USB=y -# CONFIG_CMD_NFS is not set CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y # CONFIG_SPL_DOS_PARTITION is not set diff --git a/configs/mt7621_rfb_defconfig b/configs/mt7621_rfb_defconfig index b50fbec92dd..49c9e7411d8 100644 --- a/configs/mt7621_rfb_defconfig +++ b/configs/mt7621_rfb_defconfig @@ -47,7 +47,6 @@ CONFIG_CMD_MMC=y CONFIG_CMD_PART=y # CONFIG_CMD_PINMUX is not set CONFIG_CMD_SPI=y -# CONFIG_CMD_NFS is not set CONFIG_DOS_PARTITION=y # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_ISO_PARTITION is not set diff --git a/configs/mt7623a_unielec_u7623_02_defconfig b/configs/mt7623a_unielec_u7623_02_defconfig index a7687b54f0c..20c84d65df7 100644 --- a/configs/mt7623a_unielec_u7623_02_defconfig +++ b/configs/mt7623a_unielec_u7623_02_defconfig @@ -31,7 +31,6 @@ CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y CONFIG_CMD_READ=y # CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NFS is not set CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NET_RANDOM_ETHADDR=y diff --git a/configs/mt7623n_bpir2_defconfig b/configs/mt7623n_bpir2_defconfig index 62a17f2cbc7..5e7c1fefadb 100644 --- a/configs/mt7623n_bpir2_defconfig +++ b/configs/mt7623n_bpir2_defconfig @@ -31,7 +31,6 @@ CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y CONFIG_CMD_READ=y # CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NFS is not set CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y diff --git a/configs/mt7628_rfb_defconfig b/configs/mt7628_rfb_defconfig index 0e100fca498..7e5b76c590a 100644 --- a/configs/mt7628_rfb_defconfig +++ b/configs/mt7628_rfb_defconfig @@ -37,7 +37,6 @@ CONFIG_SYS_BOOTM_LEN=0x1000000 CONFIG_CMD_GPIO=y # CONFIG_CMD_LOADS is not set CONFIG_CMD_SPI=y -# CONFIG_CMD_NFS is not set CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NET_RANDOM_ETHADDR=y diff --git a/configs/mt7629_rfb_defconfig b/configs/mt7629_rfb_defconfig index ea8d77c0a26..0e3bd4ffa7b 100644 --- a/configs/mt7629_rfb_defconfig +++ b/configs/mt7629_rfb_defconfig @@ -48,7 +48,6 @@ CONFIG_CMD_GPIO=y CONFIG_CMD_SF_TEST=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NFS is not set CONFIG_CMD_PING=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y diff --git a/configs/nyan-big_defconfig b/configs/nyan-big_defconfig index a9c10cdbb0b..cc64facd5f2 100644 --- a/configs/nyan-big_defconfig +++ b/configs/nyan-big_defconfig @@ -45,7 +45,6 @@ CONFIG_CMD_SPI=y CONFIG_CMD_USB=y CONFIG_CMD_USB_MASS_STORAGE=y # CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NFS is not set CONFIG_CMD_BMP=y CONFIG_CMD_CACHE=y CONFIG_CMD_TIME=y diff --git a/configs/odroid_defconfig b/configs/odroid_defconfig index ce0c47e505d..b1943cfd39b 100644 --- a/configs/odroid_defconfig +++ b/configs/odroid_defconfig @@ -41,7 +41,6 @@ CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_USB=y CONFIG_CMD_USB_MASS_STORAGE=y -# CONFIG_CMD_NFS is not set CONFIG_CMD_CACHE=y # CONFIG_CMD_SLEEP is not set CONFIG_CMD_PMIC=y diff --git a/configs/omap4_panda_defconfig b/configs/omap4_panda_defconfig index e27e27d0143..5571722ea6d 100644 --- a/configs/omap4_panda_defconfig +++ b/configs/omap4_panda_defconfig @@ -33,7 +33,6 @@ CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NFS is not set CONFIG_CMD_EXT4_WRITE=y CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y diff --git a/configs/omap4_sdp4430_defconfig b/configs/omap4_sdp4430_defconfig index 909f10ee790..0a8a1c77ea4 100644 --- a/configs/omap4_sdp4430_defconfig +++ b/configs/omap4_sdp4430_defconfig @@ -29,7 +29,6 @@ CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y # CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NFS is not set CONFIG_CMD_EXT4_WRITE=y # CONFIG_EFI_PARTITION is not set CONFIG_SPL_PARTITION_UUIDS=y diff --git a/configs/p2371-0000_defconfig b/configs/p2371-0000_defconfig index 7e75f44c743..dcfd3eb99a5 100644 --- a/configs/p2371-0000_defconfig +++ b/configs/p2371-0000_defconfig @@ -28,7 +28,6 @@ CONFIG_CMD_USB=y CONFIG_CMD_USB_MASS_STORAGE=y # CONFIG_CMD_SETEXPR is not set CONFIG_BOOTP_PREFER_SERVERIP=y -# CONFIG_CMD_NFS is not set CONFIG_CMD_EXT4_WRITE=y CONFIG_ENV_OVERWRITE=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y diff --git a/configs/p2371-2180_defconfig b/configs/p2371-2180_defconfig index 2543a2d11f8..5b91631367b 100644 --- a/configs/p2371-2180_defconfig +++ b/configs/p2371-2180_defconfig @@ -34,7 +34,6 @@ CONFIG_CMD_USB=y CONFIG_CMD_USB_MASS_STORAGE=y # CONFIG_CMD_SETEXPR is not set CONFIG_BOOTP_PREFER_SERVERIP=y -# CONFIG_CMD_NFS is not set CONFIG_CMD_EXT4_WRITE=y CONFIG_OF_LIVE=y CONFIG_ENV_OVERWRITE=y diff --git a/configs/p2571_defconfig b/configs/p2571_defconfig index 47a0a62d252..7e2829e3a0d 100644 --- a/configs/p2571_defconfig +++ b/configs/p2571_defconfig @@ -29,7 +29,6 @@ CONFIG_CMD_USB=y CONFIG_CMD_USB_MASS_STORAGE=y # CONFIG_CMD_SETEXPR is not set CONFIG_BOOTP_PREFER_SERVERIP=y -# CONFIG_CMD_NFS is not set CONFIG_CMD_EXT4_WRITE=y CONFIG_ENV_OVERWRITE=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y diff --git a/configs/p2771-0000-000_defconfig b/configs/p2771-0000-000_defconfig index e3b978eb1ed..ae235058afd 100644 --- a/configs/p2771-0000-000_defconfig +++ b/configs/p2771-0000-000_defconfig @@ -27,7 +27,6 @@ CONFIG_CMD_PCI=y CONFIG_CMD_SPI=y # CONFIG_CMD_SETEXPR is not set CONFIG_BOOTP_PREFER_SERVERIP=y -# CONFIG_CMD_NFS is not set CONFIG_CMD_EXT4_WRITE=y CONFIG_ENV_OVERWRITE=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y diff --git a/configs/p2771-0000-500_defconfig b/configs/p2771-0000-500_defconfig index c99a24eef40..0ea47192dda 100644 --- a/configs/p2771-0000-500_defconfig +++ b/configs/p2771-0000-500_defconfig @@ -27,7 +27,6 @@ CONFIG_CMD_PCI=y CONFIG_CMD_SPI=y # CONFIG_CMD_SETEXPR is not set CONFIG_BOOTP_PREFER_SERVERIP=y -# CONFIG_CMD_NFS is not set CONFIG_CMD_EXT4_WRITE=y CONFIG_ENV_OVERWRITE=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y diff --git a/configs/p3450-0000_defconfig b/configs/p3450-0000_defconfig index e280be8f2ec..b0d538f0f83 100644 --- a/configs/p3450-0000_defconfig +++ b/configs/p3450-0000_defconfig @@ -35,7 +35,6 @@ CONFIG_CMD_USB=y CONFIG_CMD_USB_MASS_STORAGE=y # CONFIG_CMD_SETEXPR is not set CONFIG_BOOTP_PREFER_SERVERIP=y -# CONFIG_CMD_NFS is not set CONFIG_CMD_EXT4_WRITE=y CONFIG_OF_LIVE=y CONFIG_ENV_OVERWRITE=y diff --git a/configs/paz00_defconfig b/configs/paz00_defconfig index fadf7fdeb07..8c125c39b2f 100644 --- a/configs/paz00_defconfig +++ b/configs/paz00_defconfig @@ -28,7 +28,6 @@ CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NFS is not set CONFIG_CMD_PMIC=y CONFIG_CMD_REGULATOR=y CONFIG_CMD_EXT4_WRITE=y diff --git a/configs/plutux_defconfig b/configs/plutux_defconfig index 4fee9df94f8..ab9aef5e478 100644 --- a/configs/plutux_defconfig +++ b/configs/plutux_defconfig @@ -32,7 +32,6 @@ CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NFS is not set CONFIG_CMD_EXT4_WRITE=y # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set diff --git a/configs/qemu-x86_64_defconfig b/configs/qemu-x86_64_defconfig index f29a5aa0f81..6a539a859e0 100644 --- a/configs/qemu-x86_64_defconfig +++ b/configs/qemu-x86_64_defconfig @@ -47,7 +47,6 @@ CONFIG_CMD_SPI=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_BOOTP_BOOTFILESIZE=y -# CONFIG_CMD_NFS is not set CONFIG_CMD_TIME=y CONFIG_CMD_QFW=y CONFIG_CMD_BOOTSTAGE=y diff --git a/configs/qemu-x86_defconfig b/configs/qemu-x86_defconfig index 9bf29647fe5..a7c37b8b0e1 100644 --- a/configs/qemu-x86_defconfig +++ b/configs/qemu-x86_defconfig @@ -28,7 +28,6 @@ CONFIG_CMD_SPI=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_BOOTP_BOOTFILESIZE=y -# CONFIG_CMD_NFS is not set CONFIG_CMD_TIME=y CONFIG_CMD_QFW=y CONFIG_CMD_BOOTSTAGE=y diff --git a/configs/seaboard_defconfig b/configs/seaboard_defconfig index 00cca911710..f8759f25546 100644 --- a/configs/seaboard_defconfig +++ b/configs/seaboard_defconfig @@ -31,7 +31,6 @@ CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NFS is not set CONFIG_CMD_PMIC=y CONFIG_CMD_REGULATOR=y CONFIG_CMD_EXT4_WRITE=y diff --git a/configs/smdkv310_defconfig b/configs/smdkv310_defconfig index cc0ecad11b3..2f466d23a54 100644 --- a/configs/smdkv310_defconfig +++ b/configs/smdkv310_defconfig @@ -27,7 +27,6 @@ CONFIG_SYS_PBSIZE=1024 # CONFIG_CMD_XIMG is not set CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y -# CONFIG_CMD_NFS is not set CONFIG_CMD_CACHE=y # CONFIG_CMD_SLEEP is not set CONFIG_CMD_EXT4_WRITE=y diff --git a/configs/sniper_defconfig b/configs/sniper_defconfig index f6b59a6e9b8..c762d75aec1 100644 --- a/configs/sniper_defconfig +++ b/configs/sniper_defconfig @@ -32,7 +32,6 @@ CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y # CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NFS is not set CONFIG_ENV_OVERWRITE=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_SYS_I2C_LEGACY=y diff --git a/configs/socrates_defconfig b/configs/socrates_defconfig index 6b67021064a..7727e4669d7 100644 --- a/configs/socrates_defconfig +++ b/configs/socrates_defconfig @@ -57,7 +57,6 @@ CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_BOOTP_BOOTFILESIZE=y -# CONFIG_CMD_NFS is not set CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_SNTP=y diff --git a/configs/som-db5800-som-6867_defconfig b/configs/som-db5800-som-6867_defconfig index ad95274879a..4a149133db6 100644 --- a/configs/som-db5800-som-6867_defconfig +++ b/configs/som-db5800-som-6867_defconfig @@ -38,7 +38,6 @@ CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_BOOTP_BOOTFILESIZE=y -# CONFIG_CMD_NFS is not set CONFIG_CMD_PING=y CONFIG_CMD_TIME=y CONFIG_CMD_BOOTSTAGE=y diff --git a/configs/tec-ng_defconfig b/configs/tec-ng_defconfig index 442cee33a9f..4776e92683d 100644 --- a/configs/tec-ng_defconfig +++ b/configs/tec-ng_defconfig @@ -34,7 +34,6 @@ CONFIG_CMD_MMC=y CONFIG_CMD_SPI=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NFS is not set CONFIG_CMD_EXT4_WRITE=y # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set diff --git a/configs/tec_defconfig b/configs/tec_defconfig index 461c46c725d..8a5d959a5c0 100644 --- a/configs/tec_defconfig +++ b/configs/tec_defconfig @@ -31,7 +31,6 @@ CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NFS is not set CONFIG_CMD_PMIC=y CONFIG_CMD_REGULATOR=y CONFIG_CMD_EXT4_WRITE=y diff --git a/configs/theadorable-x86-conga-qa3-e3845-pcie-x4_defconfig b/configs/theadorable-x86-conga-qa3-e3845-pcie-x4_defconfig index 43dab09316e..69499e17f4c 100644 --- a/configs/theadorable-x86-conga-qa3-e3845-pcie-x4_defconfig +++ b/configs/theadorable-x86-conga-qa3-e3845-pcie-x4_defconfig @@ -38,7 +38,6 @@ CONFIG_CMD_SPI=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_BOOTP_BOOTFILESIZE=y -# CONFIG_CMD_NFS is not set CONFIG_CMD_PING=y CONFIG_CMD_BMP=y CONFIG_CMD_TIME=y diff --git a/configs/theadorable-x86-conga-qa3-e3845_defconfig b/configs/theadorable-x86-conga-qa3-e3845_defconfig index 5aec52733e6..e2e64b74349 100644 --- a/configs/theadorable-x86-conga-qa3-e3845_defconfig +++ b/configs/theadorable-x86-conga-qa3-e3845_defconfig @@ -37,7 +37,6 @@ CONFIG_CMD_SPI=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_BOOTP_BOOTFILESIZE=y -# CONFIG_CMD_NFS is not set CONFIG_CMD_PING=y CONFIG_CMD_BMP=y CONFIG_CMD_TIME=y diff --git a/configs/theadorable-x86-dfi-bt700_defconfig b/configs/theadorable-x86-dfi-bt700_defconfig index d5a28a2df4b..751ae3497ec 100644 --- a/configs/theadorable-x86-dfi-bt700_defconfig +++ b/configs/theadorable-x86-dfi-bt700_defconfig @@ -35,7 +35,6 @@ CONFIG_CMD_SPI=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_BOOTP_BOOTFILESIZE=y -# CONFIG_CMD_NFS is not set CONFIG_CMD_PING=y CONFIG_CMD_BMP=y CONFIG_CMD_TIME=y diff --git a/configs/trimslice_defconfig b/configs/trimslice_defconfig index d94a0b408b5..9ec08bda883 100644 --- a/configs/trimslice_defconfig +++ b/configs/trimslice_defconfig @@ -35,7 +35,6 @@ CONFIG_CMD_PCI=y CONFIG_CMD_SPI=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NFS is not set CONFIG_CMD_EXT4_WRITE=y # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set diff --git a/configs/venice2_defconfig b/configs/venice2_defconfig index fd538da3ac5..ebd1754fc8b 100644 --- a/configs/venice2_defconfig +++ b/configs/venice2_defconfig @@ -36,7 +36,6 @@ CONFIG_CMD_SPI=y CONFIG_CMD_USB=y CONFIG_CMD_USB_MASS_STORAGE=y # CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NFS is not set CONFIG_CMD_EXT4_WRITE=y # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set diff --git a/configs/ventana_defconfig b/configs/ventana_defconfig index 5e2ff877ca8..2da8ba94d62 100644 --- a/configs/ventana_defconfig +++ b/configs/ventana_defconfig @@ -29,7 +29,6 @@ CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NFS is not set CONFIG_CMD_PMIC=y CONFIG_CMD_REGULATOR=y CONFIG_CMD_EXT4_WRITE=y diff --git a/configs/vexpress_ca9x4_defconfig b/configs/vexpress_ca9x4_defconfig index 4ee64c332b3..5cacecc7cbc 100644 --- a/configs/vexpress_ca9x4_defconfig +++ b/configs/vexpress_ca9x4_defconfig @@ -30,7 +30,6 @@ CONFIG_CMD_MMC=y # CONFIG_CMD_ITEST is not set # CONFIG_CMD_SETEXPR is not set CONFIG_BOOTP_BOOTFILESIZE=y -# CONFIG_CMD_NFS is not set # CONFIG_CMD_SLEEP is not set CONFIG_CMD_UBI=y CONFIG_OF_CONTROL=y -- 2.41.0

3 3

[PATCH 1/2] doc: board: phytec: add phycore_imx8mm
by Yannic Moog 14 Jun '23

14 Jun '23

Add documentation on how to build a bootable U-Boot image for the PHYTEC phyCORE-i.MX 8M Mini. Signed-off-by: Yannic Moog <y.moog(a)phytec.de> --- doc/board/index.rst | 1 + doc/board/phytec/index.rst | 9 +++++ doc/board/phytec/phycore-imx8mm.rst | 60 +++++++++++++++++++++++++++++ 3 files changed, 70 insertions(+) create mode 100644 doc/board/phytec/index.rst create mode 100644 doc/board/phytec/phycore-imx8mm.rst diff --git a/doc/board/index.rst b/doc/board/index.rst index 9ef25b1091..ce1fbe2fff 100644 --- a/doc/board/index.rst +++ b/doc/board/index.rst @@ -32,6 +32,7 @@ Board-specific doc nokia/index nxp/index openpiton/index + phytec/index purism/index qualcomm/index renesas/index diff --git a/doc/board/phytec/index.rst b/doc/board/phytec/index.rst new file mode 100644 index 0000000000..30292d0d76 --- /dev/null +++ b/doc/board/phytec/index.rst @@ -0,0 +1,9 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +PHYTEC +====== + +.. toctree:: + :maxdepth: 2 + + phycore-imx8mm diff --git a/doc/board/phytec/phycore-imx8mm.rst b/doc/board/phytec/phycore-imx8mm.rst new file mode 100644 index 0000000000..e9dc225990 --- /dev/null +++ b/doc/board/phytec/phycore-imx8mm.rst @@ -0,0 +1,60 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +phyCORE-i.MX 8M Mini +==================== + +The phyCORE-i.MX 8M Mini with 2GB of main memory is supported. + +Quick Start +----------- + +- Build the ARM Trusted firmware binary +- Get ddr firmware +- Build U-Boot +- Boot + +Build the ARM Trusted firmware binary +------------------------------------- + +.. code-block:: bash + + $ git clone https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git + $ cd trusted-firmware-a + $ export CROSS_COMPILE=aarch64-linux-gnu + $ export IMX_BOOT_UART_BASE=0x30880000 + $ make PLAT=imx8mm bl31 + +Get the ddr firmware +-------------------- + +.. code-block:: bash + + $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.19.bin + $ chmod +x firmware-imx-8.19.bin + $ ./firmware-imx-8.19.bin + +Build U-Boot for SD card +------------------------ + +Copy binaries +^^^^^^^^^^^^^ + +.. code-block:: bash + + $ cp <TF-A dir>/build/imx8mm/release/bl31.bin . + $ cp firmware-imx-8.19/firmware/ddr/synopsys/lpddr4*.bin . + +Build U-Boot +^^^^^^^^^^^^ + +.. code-block:: bash + + $ make phycore-imx8mm_defconfig + $ make flash.bin + +Flash SD card +^^^^^^^^^^^^^ + +.. code-block:: bash + + $ sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=33 conv=sync -- 2.34.1

1 1

[PATCH v1 0/3] Sync PolarFire SoC dts with Linux
by Conor Dooley 14 Jun '23

14 Jun '23

Hey, Couple of patches here that do a long-overdue sync of the Linux devicetree for PolarFire SoC & the Icicle kit with Linux. This wasn't possible for a while due to an incorrect dts & clock driver that were based on a pre-upstream version of the dt-binding. That's fixed now, so a complete re-sync is possible. To elide complaints about the mac address not being set for the second ethernet, the code which set it for ethernet0 has been changed to set it for whichever (or both) of the macbs that are enabled. Hopefully I'll have a follow-on bit of work soonTM that will rework the mac address setting code as it'll be needed to support another board. Cheers, Conor. Conor Dooley (3): riscv: dts: drop microchip from dts filenames riscv: dts: sync mpfs-icicle devicetree with linux board: microchip: set mac address for ethernet1 on icicle arch/riscv/dts/Makefile | 2 +- arch/riscv/dts/microchip-mpfs-icicle-kit.dts | 136 ------ arch/riscv/dts/mpfs-icicle-kit-fabric.dtsi | 71 +++ ...-boot.dtsi => mpfs-icicle-kit-u-boot.dtsi} | 0 arch/riscv/dts/mpfs-icicle-kit.dts | 208 +++++++++ .../dts/{microchip-mpfs.dtsi => mpfs.dtsi} | 442 ++++++++---------- board/microchip/mpfs_icicle/mpfs_icicle.c | 15 +- configs/microchip_mpfs_icicle_defconfig | 2 +- doc/board/microchip/mpfs_icicle.rst | 6 +- .../dt-bindings/clock/microchip-mpfs-clock.h | 29 +- .../microchip-mpfs-plic.h | 196 -------- .../interrupt-controller/riscv-hart.h | 17 - 12 files changed, 514 insertions(+), 610 deletions(-) delete mode 100644 arch/riscv/dts/microchip-mpfs-icicle-kit.dts create mode 100644 arch/riscv/dts/mpfs-icicle-kit-fabric.dtsi rename arch/riscv/dts/{microchip-mpfs-icicle-kit-u-boot.dtsi => mpfs-icicle-kit-u-boot.dtsi} (100%) create mode 100644 arch/riscv/dts/mpfs-icicle-kit.dts rename arch/riscv/dts/{microchip-mpfs.dtsi => mpfs.dtsi} (57%) delete mode 100644 include/dt-bindings/interrupt-controller/microchip-mpfs-plic.h delete mode 100644 include/dt-bindings/interrupt-controller/riscv-hart.h -- 2.40.1

2 7

Pull request for tpm-for_tom-13062023
by Ilias Apalodimas 13 Jun '23

13 Jun '23

Hi Tom, The following changes since commit 260d4962e06c0a7d2713523c131416a3f70d7f2c: Merge tag v2023.07-rc4 into next (2023-06-12 14:55:33 -0400) are available in the Git repository at: https://source.denx.de/u-boot/custodians/u-boot-tpm/ tags/tpm-for_tom-13062023 for you to fetch changes up to 011f015540d788227a1a2d16dd6245120827bdec: test/py: Account PCR updates properly during testing (2023-06-13 08:51:07 +0300) The CI https://source.denx.de/u-boot/custodians/u-boot-tpm/-/pipelines/16574 showed no issues ---------------------------------------------------------------- In order to initialize a tpm device we usually need the following command sequence - tpm init - tpm startup TPM2_SU_CLEAR - tpm2 self_test full A few months ago we added a tpm_autostart() function which wraps that in a single function and always initializes the tpm correctly. We can now provide a command line for that function and simplify our CLI. ---------------------------------------------------------------- Ilias Apalodimas (3): tpm: Add 'tpm autostart' shell command test/py: replace 'tpm2 init, startup, selftest' sequences test/py: Account PCR updates properly during testing cmd/tpm-common.c | 16 ++++++++++++++++ cmd/tpm-user-utils.h | 1 + cmd/tpm-v1.c | 6 +++++- cmd/tpm-v2.c | 6 ++++++ test/py/tests/test_tpm2.py | 19 ++++++++----------- 5 files changed, 36 insertions(+), 12 deletions(-)

2 1

[PATCH 1/1] doc: man-page for imxtract
by Heinrich Schuchardt 13 Jun '23

13 Jun '23

Provide a man-page for the imxtract command. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt(a)canonical.com> --- doc/usage/cmd/imxtract.rst | 81 ++++++++++++++++++++++++++++++++++++++ doc/usage/index.rst | 1 + 2 files changed, 82 insertions(+) create mode 100644 doc/usage/cmd/imxtract.rst diff --git a/doc/usage/cmd/imxtract.rst b/doc/usage/cmd/imxtract.rst new file mode 100644 index 0000000000..eb64b1cefa --- /dev/null +++ b/doc/usage/cmd/imxtract.rst @@ -0,0 +1,81 @@ +.. SPDX-License-Identifier: GPL-2.0+: + +imxtract command +================ + +Synopsis +-------- + +:: + + imxtract addr part [dest] + imxtract addr uname [dest] + +Description +----------- + +The imxtract command is used to extract a part of a multi-image file. + +Two different file formats are supported: + +* FIT images +* legacy U-Boot images + +addr + Address of the multi-image file from which a part shall be extracted + +part + Index (hexadecimal) of the part of a legacy U-Boot image to be extracted + +uname + Name of the part of a FIT image to be extracted + +dest + Destination address (defaults to 0x0) + +The value of environment variable *verify* controls if the hashes and +signatures of FIT images or the check sums of legacy U-Boot images are checked. +To enable checking set *verify* to one of the values *1*, *yes*, *true*. +(Actually only the first letter is checked disregarding the case.) + +To list the parts of an image the *iminfo* command can be used. + +Examples +-------- + +With verify=no incorrect hashes, signatures, or check sums don't stop the +extraction. But correct hashes are still indicated in the output +(here: md5, sha1). + +.. code-block:: console + + => setenv verify no + => imxtract $loadaddr kernel-1 $kernel_addr_r + ## Copying 'kernel-1' subimage from FIT image at 40200000 ... + md5+ sha1+ Loading part 0 ... OK + => + +With verify=yes incorrect hashes, signatures, or check sums stop the extraction. + +.. code-block:: console + + => setenv verify yes + => imxtract $loadaddr kernel-1 $kernel_addr_r + ## Copying 'kernel-1' subimage from FIT image at 40200000 ... + md5 error! + Bad hash value for 'hash-1' hash node in 'kernel-1' image node + Bad Data Hash + => + +Configuration +------------- + +The imxtract command is only available if CONFIG_CMD_XIMG=y. Support for FIT +images requires CONFIG_FIT=y. Support for legacy U-Boot images requires +CONFIG_LEGACY_IMAGE_FORMAT=y. + +Return value +------------ + +On success the return value $? of the command is 0 (true). On failure the +return value is 1 (false). diff --git a/doc/usage/index.rst b/doc/usage/index.rst index 84ef8a9a42..54ef89edb2 100644 --- a/doc/usage/index.rst +++ b/doc/usage/index.rst @@ -62,6 +62,7 @@ Shell commands cmd/fwu_mdata cmd/gpio cmd/host + cmd/imxtract cmd/load cmd/loadb cmd/loadm -- 2.40.1

1 0