April 2023 - U-Boot

[PATCH v3] i2c: correct I2C deblock logic
by haibo.chen＠nxp.com 11 Apr '23

11 Apr '23

From: Haibo Chen <haibo.chen(a)nxp.com> Current code use dm_gpio_get_value() to get SDA and SCL value, and the value depends on whether DTS file config the GPIO_ACTIVE_LOW. In ususal case for i2c GPIO, DTS need to set GPIO_ACTIVE_LOW for SCL/SDA pins. So here the logic is not correct. And we must not use GPIOD_ACTIVE_LOW in client code include the dm_gpio_set_dir_flags(), it is DTS's responsibility for this flag. So remove GPIOD_ACTIVE_LOW here. Fixes: aa54192d4a87 ("dm: i2c: implement gpio-based I2C deblock") Signed-off-by: Haibo Chen <haibo.chen(a)nxp.com> --- drivers/i2c/i2c-uclass.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/i2c/i2c-uclass.c b/drivers/i2c/i2c-uclass.c index 8d9a89ed89..8867a560bd 100644 --- a/drivers/i2c/i2c-uclass.c +++ b/drivers/i2c/i2c-uclass.c @@ -508,13 +508,13 @@ static void i2c_gpio_set_pin(struct gpio_desc *pin, int bit) dm_gpio_set_dir_flags(pin, GPIOD_IS_IN); else dm_gpio_set_dir_flags(pin, GPIOD_IS_OUT | - GPIOD_ACTIVE_LOW | GPIOD_IS_OUT_ACTIVE); } static int i2c_gpio_get_pin(struct gpio_desc *pin) { - return dm_gpio_get_value(pin); + /* DTS need config GPIO_ACTIVE_LOW */ + return !dm_gpio_get_value(pin); } int i2c_deblock_gpio_loop(struct gpio_desc *sda_pin, -- 2.34.1

3 2

[PATCH] i2c: designware_i2c: remove apparently redundant read of 'i2c, speeds' DT property
by Rasmus Villemoes 11 Apr '23

11 Apr '23

This code first figures out if there is an i2c,speeds property, if so its size in u32s, and then reads the value into the local speeds[] array. Both 'size' and 'speeds' are completely unused thereafter. It's not at all clear what this is supposed to do. Of course, it could be seen as a sanity check that the DT node does have an i2c,speeds property with an appropriate number of elements, but for that one wouldn't actually need to read it into speeds[]. Also, I can't find anywhere else in the U-Boot code which makes use of values from that property (this is is the only C code referencing "i2c,speeds"), so it seems pointless to insist that it's there. Signed-off-by: Rasmus Villemoes <rasmus.villemoes(a)prevas.dk> --- drivers/i2c/designware_i2c_pci.c | 14 -------------- 1 file changed, 14 deletions(-) diff --git a/drivers/i2c/designware_i2c_pci.c b/drivers/i2c/designware_i2c_pci.c index 46c2545f21..28495a3f42 100644 --- a/drivers/i2c/designware_i2c_pci.c +++ b/drivers/i2c/designware_i2c_pci.c @@ -147,9 +147,7 @@ static int dw_i2c_acpi_fill_ssdt(const struct udevice *dev, { struct dw_i2c_speed_config config; char path[ACPI_PATH_MAX]; - u32 speeds[4]; uint speed; - int size; int ret; /* If no device-tree node, ignore this since we assume it isn't used */ @@ -160,18 +158,6 @@ static int dw_i2c_acpi_fill_ssdt(const struct udevice *dev, if (ret) return log_msg_ret("path", ret); - size = dev_read_size(dev, "i2c,speeds"); - if (size < 0) - return log_msg_ret("i2c,speeds", -EINVAL); - - size /= sizeof(u32); - if (size > ARRAY_SIZE(speeds)) - return log_msg_ret("array", -E2BIG); - - ret = dev_read_u32_array(dev, "i2c,speeds", speeds, size); - if (ret) - return log_msg_ret("read", -E2BIG); - speed = dev_read_u32_default(dev, "clock-frequency", 100000); acpigen_write_scope(ctx, path); ret = dw_i2c_gen_speed_config(dev, speed, &config); -- 2.37.2

2 1

[PATCH v2] watchdog: arm_smc_wdt: add watchdog support
by Lionel Debieve 11 Apr '23

11 Apr '23

Implement a ARM SMCCC based driver that allow to use a secure watchdog on the platform. Signed-off-by: Lionel Debieve <lionel.debieve(a)foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay(a)foss.st.com> Tested-by: Patrick Delaunay <patrick.delaunay(a)foss.st.com> --- (no changes since v1) drivers/watchdog/Kconfig | 8 +++ drivers/watchdog/Makefile | 1 + drivers/watchdog/arm_smc_wdt.c | 121 +++++++++++++++++++++++++++++++++ 3 files changed, 130 insertions(+) create mode 100644 drivers/watchdog/arm_smc_wdt.c diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index b5ac8f7f50d..3a0341f609d 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -352,6 +352,14 @@ config WDT_TANGIER Intel Tangier SoC. If you're using a board with Intel Tangier SoC, say Y here. +config WDT_ARM_SMC + bool "ARM SMC watchdog timer support" + depends on WDT && ARM_SMCCC + imply WATCHDOG + help + Select this to enable Arm SMC watchdog timer. This watchdog will manage + a watchdog based on ARM SMCCC communication. + config SPL_WDT bool "Enable driver model for watchdog timer drivers in SPL" depends on SPL_DM diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile index 446d961d7d2..a4633c0d2fa 100644 --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile @@ -18,6 +18,7 @@ obj-$(CONFIG_$(SPL_TPL_)WDT) += wdt-uclass.o obj-$(CONFIG_WDT_SANDBOX) += sandbox_wdt.o obj-$(CONFIG_WDT_ALARM_SANDBOX) += sandbox_alarm-wdt.o obj-$(CONFIG_WDT_APPLE) += apple_wdt.o +obj-$(CONFIG_WDT_ARM_SMC) += arm_smc_wdt.o obj-$(CONFIG_WDT_ARMADA_37XX) += armada-37xx-wdt.o obj-$(CONFIG_WDT_ASPEED) += ast_wdt.o obj-$(CONFIG_WDT_AST2600) += ast2600_wdt.o diff --git a/drivers/watchdog/arm_smc_wdt.c b/drivers/watchdog/arm_smc_wdt.c new file mode 100644 index 00000000000..70ab99bdbfb --- /dev/null +++ b/drivers/watchdog/arm_smc_wdt.c @@ -0,0 +1,121 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * ARM Secure Monitor Call watchdog driver + * Copyright (C) 2022, STMicroelectronics - All Rights Reserved + * This file is based on Linux driver drivers/watchdog/arm_smc_wdt.c + */ + +#define LOG_CATEGORY UCLASS_WDT + +#include <dm.h> +#include <dm/device_compat.h> +#include <linux/arm-smccc.h> +#include <linux/psci.h> +#include <wdt.h> + +#define DRV_NAME "arm_smc_wdt" + +#define WDT_TIMEOUT_SECS(TIMEOUT) ((TIMEOUT) / 1000) + +enum smcwd_call { + SMCWD_INIT = 0, + SMCWD_SET_TIMEOUT = 1, + SMCWD_ENABLE = 2, + SMCWD_PET = 3, + SMCWD_GET_TIMELEFT = 4, +}; + +struct smcwd_priv_data { + u32 smc_id; + unsigned int min_timeout; + unsigned int max_timeout; +}; + +static int smcwd_call(struct udevice *dev, enum smcwd_call call, + unsigned long arg, struct arm_smccc_res *res) +{ + struct smcwd_priv_data *priv = dev_get_priv(dev); + struct arm_smccc_res local_res; + + if (!res) + res = &local_res; + + arm_smccc_smc(priv->smc_id, call, arg, 0, 0, 0, 0, 0, res); + + if (res->a0 == PSCI_RET_NOT_SUPPORTED) + return -ENODEV; + if (res->a0 == PSCI_RET_INVALID_PARAMS) + return -EINVAL; + if (res->a0 != PSCI_RET_SUCCESS) + return -EIO; + + return 0; +} + +static int smcwd_reset(struct udevice *dev) +{ + return smcwd_call(dev, SMCWD_PET, 0, NULL); +} + +static int smcwd_stop(struct udevice *dev) +{ + return smcwd_call(dev, SMCWD_ENABLE, 0, NULL); +} + +static int smcwd_start(struct udevice *dev, u64 timeout_ms, ulong flags) +{ + struct smcwd_priv_data *priv = dev_get_priv(dev); + u64 timeout_sec = WDT_TIMEOUT_SECS(timeout_ms); + int err; + + if (timeout_sec < priv->min_timeout || timeout_sec > priv->max_timeout) { + dev_err(dev, "Timeout value not supported\n"); + return -EINVAL; + } + + err = smcwd_call(dev, SMCWD_SET_TIMEOUT, timeout_sec, NULL); + if (err) { + dev_err(dev, "Timeout out configuration failed\n"); + return err; + } + + return smcwd_call(dev, SMCWD_ENABLE, 1, NULL); +} + +static int smcwd_probe(struct udevice *dev) +{ + struct smcwd_priv_data *priv = dev_get_priv(dev); + struct arm_smccc_res res; + int err; + + priv->smc_id = dev_read_u32_default(dev, "arm,smc-id", 0x82003D06); + + err = smcwd_call(dev, SMCWD_INIT, 0, &res); + if (err < 0) + return err; + + priv->min_timeout = res.a1; + priv->max_timeout = res.a2; + + return 0; +} + +static const struct wdt_ops smcwd_ops = { + .start = smcwd_start, + .stop = smcwd_stop, + .reset = smcwd_reset, +}; + +static const struct udevice_id smcwd_dt_ids[] = { + { .compatible = "arm,smc-wdt" }, + {} +}; + +U_BOOT_DRIVER(wdt_sandbox) = { + .name = "smcwd", + .id = UCLASS_WDT, + .of_match = smcwd_dt_ids, + .priv_auto = sizeof(struct smcwd_priv_data), + .probe = smcwd_probe, + .ops = &smcwd_ops, +}; -- 2.25.1

3 2

[PATCH] watchdog: ftwdt010: return a previously deleted driver now ported to DM
by Sergei Antonov 11 Apr '23

11 Apr '23

The ftwdt010 watchdog driver was deleted by commit 11232139e399 ("nds32: Remove the architecture") Return it to the codebase in a DM compatible form. Enable it in sandbox_defconfig to test compilability. Another platform using ftwdt010 will be submitted later. Signed-off-by: Sergei Antonov <saproj(a)gmail.com> --- configs/sandbox_defconfig | 1 + drivers/watchdog/Kconfig | 7 ++ drivers/watchdog/Makefile | 1 + drivers/watchdog/ftwdt010_wdt.c | 132 ++++++++++++++++++++++++++++++++ include/faraday/ftwdt010_wdt.h | 3 - 5 files changed, 141 insertions(+), 3 deletions(-) create mode 100644 drivers/watchdog/ftwdt010_wdt.c diff --git a/configs/sandbox_defconfig b/configs/sandbox_defconfig index 34c342b6f587..0c57e97bcb7e 100644 --- a/configs/sandbox_defconfig +++ b/configs/sandbox_defconfig @@ -320,6 +320,7 @@ CONFIG_WDT=y CONFIG_WDT_GPIO=y CONFIG_WDT_SANDBOX=y CONFIG_WDT_ALARM_SANDBOX=y +CONFIG_WDT_FTWDT010=y CONFIG_FS_CBFS=y CONFIG_FS_CRAMFS=y CONFIG_ADDR_MAP=y diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index b5ac8f7f50dc..a4c8dac99046 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -161,6 +161,13 @@ config WDT_CORTINA This driver support all CPU ISAs supported by Cortina Access CAxxxx SoCs. +config WDT_FTWDT010 + bool "Faraday Technology ftwdt010 watchdog timer support" + depends on WDT + help + Faraday Technology ftwdt010 watchdog is an architecture independent + watchdog. It is usually used in SoC chip design. + config WDT_GPIO bool "External gpio watchdog support" depends on WDT diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile index 446d961d7d2e..fffa338bef2f 100644 --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile @@ -26,6 +26,7 @@ obj-$(CONFIG_WDT_BOOKE) += booke_wdt.o obj-$(CONFIG_WDT_CORTINA) += cortina_wdt.o obj-$(CONFIG_WDT_ORION) += orion_wdt.o obj-$(CONFIG_WDT_CDNS) += cdns_wdt.o +obj-$(CONFIG_WDT_FTWDT010) += ftwdt010_wdt.o obj-$(CONFIG_WDT_GPIO) += gpio_wdt.o obj-$(CONFIG_WDT_MAX6370) += max6370_wdt.o obj-$(CONFIG_WDT_MESON_GXBB) += meson_gxbb_wdt.o diff --git a/drivers/watchdog/ftwdt010_wdt.c b/drivers/watchdog/ftwdt010_wdt.c new file mode 100644 index 000000000000..5f4e42e58a47 --- /dev/null +++ b/drivers/watchdog/ftwdt010_wdt.c @@ -0,0 +1,132 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Watchdog driver for the FTWDT010 Watch Dog Driver + * + * (c) Copyright 2004 Faraday Technology Corp. (www.faraday-tech.com) + * Based on sa1100_wdt.c by Oleg Drokin <green(a)crimea.edu> + * Based on SoftDog driver by Alan Cox <alan(a)redhat.com> + * + * Copyright (C) 2011 Andes Technology Corporation + * Macpaul Lin, Andes Technology Corporation <macpaul(a)andestech.com> + * + * 27/11/2004 Initial release, Faraday. + * 12/01/2011 Port to u-boot, Macpaul Lin. + * 22/08/2022 Port to DM + */ + +#include <common.h> +#include <dm.h> +#include <wdt.h> +#include <log.h> +#include <asm/io.h> +#include <faraday/ftwdt010_wdt.h> + +struct ftwdt010_wdt_priv { + struct ftwdt010_wdt __iomem *regs; +}; + +/* + * Set the watchdog time interval. + * Counter is 32 bit. + */ +static int ftwdt010_wdt_start(struct udevice *dev, u64 timeout_ms, ulong flags) +{ + struct ftwdt010_wdt_priv *priv = dev_get_priv(dev); + struct ftwdt010_wdt *wd = priv->regs; + unsigned int reg; + + debug("Activating WDT %llu ms\n", timeout_ms); + + /* Check if disabled */ + if (readl(&wd->wdcr) & ~FTWDT010_WDCR_ENABLE) { + printf("sorry, watchdog is disabled\n"); + return -1; + } + + /* + * In a 66MHz system, + * if you set WDLOAD as 0x03EF1480 (66000000) + * the reset timer is 1 second. + */ + reg = FTWDT010_WDLOAD(timeout_ms * FTWDT010_TIMEOUT_FACTOR); + + writel(reg, &wd->wdload); + + return 0; +} + +static int ftwdt010_wdt_reset(struct udevice *dev) +{ + struct ftwdt010_wdt_priv *priv = dev_get_priv(dev); + struct ftwdt010_wdt *wd = priv->regs; + + /* clear control register */ + writel(0, &wd->wdcr); + + /* Write Magic number */ + writel(FTWDT010_WDRESTART_MAGIC, &wd->wdrestart); + + /* Enable WDT */ + writel((FTWDT010_WDCR_RST | FTWDT010_WDCR_ENABLE), &wd->wdcr); + + return 0; +} + +static int ftwdt010_wdt_stop(struct udevice *dev) +{ + struct ftwdt010_wdt_priv *priv = dev_get_priv(dev); + struct ftwdt010_wdt *wd = priv->regs; + + debug("Deactivating WDT..\n"); + + /* + * It was defined with CONFIG_WATCHDOG_NOWAYOUT in Linux + * + * Shut off the timer. + * Lock it in if it's a module and we defined ...NOWAYOUT + */ + writel(0, &wd->wdcr); + return 0; +} + +static int ftwdt010_wdt_expire_now(struct udevice *dev, ulong flags) +{ + struct ftwdt010_wdt_priv *priv = dev_get_priv(dev); + struct ftwdt010_wdt *wd = priv->regs; + + debug("Expiring WDT..\n"); + writel(FTWDT010_WDLOAD(0), &wd->wdload); + return ftwdt010_wdt_reset(dev); +} + +static int ftwdt010_wdt_probe(struct udevice *dev) +{ + struct ftwdt010_wdt_priv *priv = dev_get_priv(dev); + + priv->regs = dev_read_addr_ptr(dev); + if (!priv->regs) + return -EINVAL; + + return 0; +} + +static const struct wdt_ops ftwdt010_wdt_ops = { + .start = ftwdt010_wdt_start, + .reset = ftwdt010_wdt_reset, + .stop = ftwdt010_wdt_stop, + .expire_now = ftwdt010_wdt_expire_now, +}; + +static const struct udevice_id ftwdt010_wdt_ids[] = { + { .compatible = "faraday,ftwdt010-wdt" }, + {} +}; + +U_BOOT_DRIVER(ftwdt010_wdt) = { + .name = "ftwdt010_wdt", + .id = UCLASS_WDT, + .of_match = ftwdt010_wdt_ids, + .ops = &ftwdt010_wdt_ops, + .probe = ftwdt010_wdt_probe, + .priv_auto = sizeof(struct ftwdt010_wdt_priv), +}; diff --git a/include/faraday/ftwdt010_wdt.h b/include/faraday/ftwdt010_wdt.h index 804907d64558..d4c11e39a053 100644 --- a/include/faraday/ftwdt010_wdt.h +++ b/include/faraday/ftwdt010_wdt.h @@ -89,7 +89,4 @@ struct ftwdt010_wdt { */ #define FTWDT010_TIMEOUT_FACTOR (get_board_sys_clk() / 1000) /* 1 ms */ -void ftwdt010_wdt_reset(void); -void ftwdt010_wdt_disable(void); - #endif /* __FTWDT010_H */ -- 2.34.1

3 3

Re: [PATCH 7/8] riscv: spl: Remove relocation sections
by Rick Chen 11 Apr '23

11 Apr '23

> From: Bin Meng <bmeng(a)tinylab.org> > Sent: Thursday, March 30, 2023 12:20 PM > To: u-boot(a)lists.denx.de > Cc: Andrew Scull <ascull(a)google.com>; Leo Yu-Chi Liang(梁育齊) <ycliang(a)andestech.com>; Rick Jian-Zhi Chen(陳建志) <rick(a)andestech.com>; Simon Glass <sjg(a)chromium.org> > Subject: [PATCH 7/8] riscv: spl: Remove relocation sections > > U-Boot SPL is not relocable. Drop these relocation sections. > > Signed-off-by: Bin Meng <bmeng(a)tinylab.org> > --- > > arch/riscv/cpu/u-boot-spl.lds | 25 ------------------------- > 1 file changed, 25 deletions(-) > > diff --git a/arch/riscv/cpu/u-boot-spl.lds b/arch/riscv/cpu/u-boot-spl.lds index 993536302a..c3b4907905 100644 > --- a/arch/riscv/cpu/u-boot-spl.lds > +++ b/arch/riscv/cpu/u-boot-spl.lds > @@ -32,14 +32,6 @@ SECTIONS > } > .spl_mem > . = ALIGN(4); > > - .got : { > - __got_start = .; > - *(.got.plt) *(.got) > - __got_end = .; > - } > .spl_mem > - > - . = ALIGN(4); > - > __u_boot_list : { > KEEP(*(SORT(__u_boot_list*))); > } > .spl_mem > @@ -54,23 +46,6 @@ SECTIONS > > . = ALIGN(4); > > - /DISCARD/ : { *(.rela.plt*) } > - .rela.dyn : { > - __rel_dyn_start = .; > - *(.rela*) > - __rel_dyn_end = .; > - } > .spl_mem This patch will cause u-boot-spl build fail: ... LD spl/u-boot-spl riscv64-linux-ld.bfd: arch/riscv/cpu/start.o: in function `fix_rela_dyn': /home/u-boot-riscv/arch/riscv/cpu/start.S:299: undefined reference to `__rel_dyn_start' riscv64-linux-ld.bfd: arch/riscv/cpu/start.o: in function `.L0 ': Thanks, Rick > - > - . = ALIGN(4); > - > - .dynsym : { > - __dyn_sym_start = .; > - *(.dynsym) > - __dyn_sym_end = .; > - } > .spl_mem > - > - . = ALIGN(4); > - > _end = .; > _image_binary_end = .; > > -- > 2.34.1

1 0

[GIT PULL] Please pull u-boot-mmc master
by Jaehoon Chung 10 Apr '23

10 Apr '23

Dear Tom, Please pull u-boot-mmc master into u-boot master branch. If there is any problem, let me know, plz. Best Regards, Jaehoon Chung CI: https://source.denx.de/u-boot/custodians/u-boot-mmc/-/pipelines/15969 The following changes since commit 7daa8dd59bc8455a43cdd2d0e34206e406e5cdcc: Merge tag 'efi-2023-07-rc1' of https://source.denx.de/u-boot/custodians/u-boot-efi (2023-04-09 11:08:39 -0400) are available in the Git repository at: git@source.denx.de:u-boot/custodians/u-boot-mmc.git master for you to fetch changes up to fbf368f176641029ac30843d4d3dbf26e384df38: cmd: mmc: Return CMD_RET_* from commands (2023-04-10 12:18:45 +0900) ---------------------------------------------------------------- Loic Poulain (3): mmc: Check support for TRIM operations mmc: erase: Use TRIM erase when available test: dm: mmc: Check block erasing boundaries Pali Rohár (2): mmc: Use EXT_CSD_EXTRACT_BOOT_PART() macro for extracting boot part cmd: mmc: Return CMD_RET_* from commands Stefan Roese (3): mmc: mv_sdhci: Simplify call to sdhci_mvebu_mbus_config() mmc: mv_sdhci: Remove CONFIG_MMC_SDHCI_IO_ACCESSORS support mmc: mv_sdhci: Depend on DM_MMC board/purism/librem5/librem5.c | 2 +- cmd/mmc.c | 18 ++++++++++---- cmd/mvebu/bubt.c | 3 +-- common/spl/spl_mmc.c | 2 +- drivers/mmc/Kconfig | 1 + drivers/mmc/mmc.c | 3 +++ drivers/mmc/mmc_write.c | 34 +++++++++++++++++--------- drivers/mmc/mv_sdhci.c | 55 +++++++----------------------------------- include/mmc.h | 4 +++ test/dm/mmc.c | 14 +++++------ 10 files changed, 63 insertions(+), 73 deletions(-)

2 1

[PATCH V2 0/4] Enable SPL splash screen on AM62x
by Nikhil M Jain 10 Apr '23

10 Apr '23

This patch series aims at eanbling SPL splash screen on AM62x. Changes in V2: - Correct CONFIG_SPL_SIZE_LIMIT_PROVIDE_STACK value. Nikhil M Jain (4): configs: am62x_evm_a53_defconfig: Changes in memory to support SPL splash screen board: ti: am62x: am62x: Change splashimage and splashsource board: ti: am62x: evm: Add necessary functions to call splash screen common: spl: spl: Remove video driver before u-boot proper board/ti/am62x/am62x.env | 4 ++-- board/ti/am62x/evm.c | 39 +++++++++++++++++++++++++++++++++ common/spl/spl.c | 15 +++++++++++++ configs/am62x_evm_a53_defconfig | 11 ++++++---- 4 files changed, 63 insertions(+), 6 deletions(-) -- 2.34.1

1 4

[PATCH] configs: rk3588: rename defconfig for rock-5b
by FUKAUMI Naoki 10 Apr '23

10 Apr '23

it should be rock-5b-rk3588_defconfig. Signed-off-by: FUKAUMI Naoki <naoki(a)radxa.com> --- configs/{rock5b-rk3588_defconfig => rock-5b-rk3588_defconfig} | 0 1 file changed, 0 insertions(+), 0 deletions(-) rename configs/{rock5b-rk3588_defconfig => rock-5b-rk3588_defconfig} (100%) diff --git a/configs/rock5b-rk3588_defconfig b/configs/rock-5b-rk3588_defconfig similarity index 100% rename from configs/rock5b-rk3588_defconfig rename to configs/rock-5b-rk3588_defconfig -- 2.39.2

2 2

Re: [PATCH 5/8] makefile: riscv: Drop useless argument of prelink-riscv
by Rick Chen 10 Apr '23

10 Apr '23

> From: U-Boot <u-boot-bounces(a)lists.denx.de> On Behalf Of Bin Meng > Sent: Thursday, March 30, 2023 12:20 PM > To: u-boot(a)lists.denx.de > Cc: Heinrich Schuchardt <xypron.glpk(a)gmx.de>; Kever Yang <kever.yang(a)rock-chips.com>; Marek Behún <kabel(a)kernel.org>; Pali Rohár <pali(a)kernel.org>; Quentin Schulz <quentin.schulz(a)theobroma-systems.com>; Simon Glass <sjg(a)chromium.org> > Subject: [PATCH 5/8] makefile: riscv: Drop useless argument of prelink-riscv > > The argv[2] is never used in prelink-riscv. Drop it. > > Signed-off-by: Bin Meng <bmeng(a)tinylab.org> > --- > > Makefile | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) Reviewed-by: Rick Chen <rick(a)andestech.com>

1 0

Pull request for efi-2023-07-rc1
by Heinrich Schuchardt 10 Apr '23

10 Apr '23

Dear Tom, The following changes since commit 19d0c64f89ee5a0d5d3077e5d7ec7dafd74a0d45: Merge branch 'master_net/phy/prep-cleanup' of https://source.denx.de/u-boot/custodians/u-boot-sh (2023-04-07 10:51:49 -0400) are available in the Git repository at: https://source.denx.de/u-boot/custodians/u-boot-efi.git tags/efi-2023-07-rc1 for you to fetch changes up to d9d07d751e0f41d009051e8c25e2d5d9cf7ca41c: cmd: consider multiplexing in coninfo (2023-04-08 07:50:43 +0200) Gitlab CI showed no issues: https://source.denx.de/u-boot/custodians/u-boot-efi/-/pipelines/15953 ---------------------------------------------------------------- Pull request for efi-2023-07-rc1 Documentation: * man-page for coninfo command * documentation style * switch settings for boot modes on AM62 SK UEFI: * avoid using deprecated HandleProtocol() * set static attribute for non-exported functions and variables ---------------------------------------------------------------- Bin Meng (5): efi: selftest: Make record static efi: selftest: Make load_file() and load_file2() static efi: loader: Make efi_event_queue and efi_register_notify_events static efi: loader: Make efi_mem static efi: loader: Make efi_runtime_mmio static Heinrich Schuchardt (6): doc: describe our documentation style doc: mention usage of .readthedocs.yml doc: coninfo man-page efi_loader: avoid using HandleProtocol in helloworld.efi efi_loader: avoid using HandleProtocol in initrddump.efi cmd: consider multiplexing in coninfo Judith Mendez (1): doc: ti: Add switch setting for boot modes on AM62 SK cmd/console.c | 11 ++++- doc/board/ti/am62x_sk.rst | 25 +++++++++++ doc/build/documentation.rst | 3 ++ doc/develop/docstyle.rst | 29 +++++++++++++ doc/develop/index.rst | 1 + doc/usage/cmd/coninfo.rst | 55 ++++++++++++++++++++++++ doc/usage/index.rst | 1 + include/efi_loader.h | 3 -- lib/efi_loader/efi_boottime.c | 4 +- lib/efi_loader/efi_memory.c | 2 +- lib/efi_loader/efi_runtime.c | 2 +- lib/efi_loader/helloworld.c | 13 +++--- lib/efi_loader/initrddump.c | 5 ++- lib/efi_selftest/efi_selftest_exitbootservices.c | 2 +- lib/efi_selftest/efi_selftest_load_file.c | 20 ++++----- 15 files changed, 149 insertions(+), 27 deletions(-) create mode 100644 doc/develop/docstyle.rst create mode 100644 doc/usage/cmd/coninfo.rst

2 1