September 2022 - U-Boot

Please pull u-boot-watchdog/next
by Stefan Roese 17 Sep '22

17 Sep '22

2 8

[PATCH v4] tee: optee: rework TA bus scanning code
by Ilias Apalodimas 16 Sep '22

16 Sep '22

Late versions of OP-TEE support a pseudo bus. TAs that behave as hardware blocks (e.g TPM, RNG etc) present themselves on a bus which we can scan. Unfortunately U-Boot doesn't support that yet. It's worth noting that we already have a workaround for RNG. The details are in commit 70812bb83da6 ("tee: optee: bind rng optee driver") So let's add a list of devices based on U-Boot Kconfig options that we will scan until we properly implement the tee-bus functionality. While at it change the behaviour of the tee core itself wrt to device binding. If some device binding fails, print a warning instead of disabling OP-TEE. Signed-off-by: Ilias Apalodimas <ilias.apalodimas(a)linaro.org> Reviewed-by: Jens Wiklander <jens.wiklander(a)linaro.org> Reviewed-by: Etienne Carriere <etienne.carriere(a)linaro.org> --- Changes since v3: - Use NULL instead of a child ptr on device_bind_driver(), since it's not really needed - Changed the style of the optee_bus_probe[] definition to {.drv_name = xxx, .dev_name = yyy } Changes since v2: - Fixed typo on driver name ftpm-tee -> ftpm_tee Changes since v1: - remove a macro and use ARRAY_SIZE directly drivers/tee/optee/core.c | 24 +++++++++++++++++++----- 1 file changed, 19 insertions(+), 5 deletions(-) diff --git a/drivers/tee/optee/core.c b/drivers/tee/optee/core.c index a89d62aaf0b3..c201a4635e6b 100644 --- a/drivers/tee/optee/core.c +++ b/drivers/tee/optee/core.c @@ -31,6 +31,18 @@ struct optee_pdata { optee_invoke_fn *invoke_fn; }; +static const struct { + const char *drv_name; + const char *dev_name; +} optee_bus_probe[] = { +#ifdef CONFIG_RNG_OPTEE + { .drv_name = "optee-rng", .dev_name = "optee-rng" }, +#endif +#ifdef CONFIG_TPM2_FTPM_TEE + { .drv_name = "ftpm_tee", .dev_name = "ftpm_tee" }, +#endif +}; + struct rpc_param { u32 a0; u32 a1; @@ -642,8 +654,7 @@ static int optee_probe(struct udevice *dev) { struct optee_pdata *pdata = dev_get_plat(dev); u32 sec_caps; - struct udevice *child; - int ret; + int ret, i; if (!is_optee_api(pdata->invoke_fn)) { dev_err(dev, "OP-TEE api uid mismatch\n"); @@ -672,10 +683,13 @@ static int optee_probe(struct udevice *dev) * in U-Boot, the discovery of TA on the TEE bus is not supported: * only bind the drivers associated to the supported OP-TEE TA */ - if (IS_ENABLED(CONFIG_RNG_OPTEE)) { - ret = device_bind_driver(dev, "optee-rng", "optee-rng", &child); + + for (i = 0; i < ARRAY_SIZE(optee_bus_probe); i++) { + ret = device_bind_driver(dev, optee_bus_probe[i].drv_name, + optee_bus_probe[i].dev_name, NULL); if (ret) - return ret; + dev_warn(dev, "Failed to bind device %s\n", + optee_bus_probe[i].dev_name); } return 0; -- 2.37.2

3 7

[PATCH v2 00/24] blk: Rationalise the block interface
by Simon Glass 16 Sep '22

16 Sep '22

The block interface has two separate implementations, one using driver model and one not. The latter is really only needed for SPL, where size constraints allegedly don't allow use of driver model. Of course we still need space for filesystems and other code, so it isn't clear that driver model is anything more than the straw that breaks the camel's back. The driver model version uses a uclass ID for the interface time, but converts back and forth between that and if_type, which is the legacy type. The HAVE_BLOCK_DEVICE define is mostly a hangover from the old days. At present its main purpose is to enable the legacy block implementation in SPL. Finally the use of 'select' to enable BLK does not work very well. It causes kconfig errors when another option depends on BLK and it is not recommended by the kconfig style guide. This series aims to clean things up: - Enable BLK based on whether different media types are used, but still allow boards to disable it - Rename HAVE_BLOCK_DEVICE to indicates its real purpose - Drop if_type and use the uclass instead - Drop some obsolete if_type values An issue not resolved by this series is that the sandbox host interface does not actually have a device. At present it uses the root device, which was convenience for the driver model conversion but not really correct. It should be possible to clean this up, in a future series. Another minor issue is the use of UCLASS_USB for a mass-storage device. This has been the case for a while and is not addresed by this series, other than to add a comment. Note that this test relies on Tom Rini's series to drop various boards including warp and cm_t335 Finally, a patch is included to make binman put fake files in a subdirectory, since repeated runs of certain boards can cause unrelated failues (e.g. chromebook_coral) when fake files are left around. Changes in v2: - Update commit message - Fix SPL_PARTITIONS too - Add SATA also - Refer to a suffix, not a prefix - Add new patch to handle UCLASS_EFI_MEDIA in dev_print() - Add new patch to drop ifname field from struct efi_disk_obj - Use conv_uclass_id() instead of the confusing uclass_id_to_uclass_id() Simon Glass (24): disk: Correct help for TPL_PARTITIONS blk: Enable CONFIG_BLK for all media ata: Fix an instance of SPL_SATA_SUPPORT sandbox: Avoid defining HAVE_BLOCK_DEVICE in Konfig disk: Use Makefile to omit partition drivers blk: Use a function for whether block devices are available cmd: Drop use of HAVE_BLOCK_DEVICE blk: Drop unnecessary #ifdef in in blk_legacy blk: Rename HAVE_BLOCK_DEVICE blk: Select SPL_LEGACY_BLOCK automatically blk: Drop unnecessary CONFIG_SPL_LEGACY_BLOCK in defconfigs blk: Hide the BLK and SPL_LEGACY_BLOCK options blk: Drop IF_TYPE_DOC ide: Use a flag for an ATAPI device blk: Drop IF_TYPE_ATAPI blk: Drop IF_TYPE_SD blk: Rename var in blk_get_devnum_by_typename() blk: Rewrite if_type to name functions efi: Correct assumption about if_type blk: Switch over to using uclass IDs disk: Handle UCLASS_EFI_MEDIA in dev_print() blk: Drop if_type efi: Drop ifname field from struct efi_disk_obj blk: Rename if_type to uclass_id arch/Kconfig | 1 - arch/arm/Kconfig | 1 - .../mach-stm32mp/cmd_stm32prog/stm32prog.c | 4 +- board/st/common/stm32mp_dfu.c | 2 +- board/toradex/common/tdx-cfg-block.c | 4 +- cmd/Kconfig | 5 - cmd/Makefile | 2 +- cmd/bcb.c | 4 +- cmd/blk_common.c | 18 +- cmd/ide.c | 2 +- cmd/lsblk.c | 2 +- cmd/mmc.c | 10 +- cmd/mvebu/bubt.c | 2 +- cmd/nvme.c | 4 +- cmd/pvblock.c | 2 +- cmd/sata.c | 4 +- cmd/scsi.c | 2 +- cmd/usb.c | 2 +- cmd/virtio.c | 2 +- common/spl/Kconfig | 2 - common/spl/spl_sata.c | 2 +- common/spl/spl_usb.c | 2 +- common/usb_storage.c | 10 +- configs/M5253DEMO_defconfig | 1 + configs/axm_defconfig | 1 - configs/bcm968380gerg_ram_defconfig | 1 - .../gardena-smart-gateway-mt7688_defconfig | 1 - configs/nsim_hs38_defconfig | 1 - configs/qemu-ppce500_defconfig | 1 - disk/Kconfig | 8 +- disk/Makefile | 4 + disk/disk-uclass.c | 11 +- disk/part.c | 161 ++++++------- disk/part_amiga.c | 4 - disk/part_dos.c | 4 - disk/part_efi.c | 3 - disk/part_iso.c | 3 - disk/part_mac.c | 3 - doc/develop/driver-model/migration.rst | 2 +- doc/develop/uefi/uefi.rst | 2 +- doc/usage/partitions.rst | 2 +- drivers/Makefile | 3 +- drivers/ata/Kconfig | 4 +- drivers/ata/dwc_ahsata.c | 2 +- drivers/ata/fsl_sata.c | 2 +- drivers/ata/sata.c | 2 +- drivers/ata/sata_mv.c | 2 +- drivers/ata/sata_sil.c | 2 +- drivers/block/Kconfig | 20 +- drivers/block/Makefile | 2 +- drivers/block/blk-uclass.c | 219 +++++++++--------- drivers/block/blk_legacy.c | 60 +++-- drivers/block/efi_blk.c | 2 +- drivers/block/ide.c | 16 +- drivers/block/sandbox.c | 14 +- drivers/dfu/dfu_mmc.c | 6 +- drivers/mmc/Kconfig | 1 - drivers/mmc/mmc-uclass.c | 12 +- drivers/mmc/mmc_legacy.c | 8 +- drivers/mmc/mmc_write.c | 4 +- drivers/net/fsl_enetc.c | 12 +- drivers/net/fsl_enetc.h | 2 +- drivers/nvme/Kconfig | 2 - drivers/nvme/nvme.c | 2 +- drivers/scsi/Kconfig | 2 - drivers/scsi/scsi.c | 12 +- drivers/tee/optee/rpmb.c | 4 +- drivers/virtio/Kconfig | 1 - drivers/virtio/virtio_blk.c | 4 +- drivers/xen/Kconfig | 1 - drivers/xen/pvblock.c | 6 +- env/mmc.c | 4 +- fs/fat/fat.c | 4 +- include/blk.h | 141 +++++------ include/efi_api.h | 4 +- include/efi_loader.h | 4 +- include/mmc.h | 2 +- lib/efi_driver/efi_block_device.c | 4 +- lib/efi_loader/Kconfig | 1 - lib/efi_loader/efi_device_path.c | 2 +- lib/efi_loader/efi_device_path_to_text.c | 4 +- lib/efi_loader/efi_disk.c | 28 ++- lib/efi_loader/efi_net.c | 2 +- lib/efi_loader/efi_var_file.c | 4 +- test/dm/blk.c | 24 +- 85 files changed, 444 insertions(+), 515 deletions(-) -- 2.37.1.595.g718a3a8f04-goog

5 41

[GIT PULL] please pull fsl-qoriq-2022-9-7
by Peng Fan 16 Sep '22

16 Sep '22

Hi Tom, Please pull fsl-qoriq-2022-9-7 Sorry for the quick rush just after fsl-qoriq-2022-9-6: Pali's patch not in my patchwork, got missed. Sean's patch pending for sometime, I just fix conflict when apply Sean's patch, so pick up. --------------------------------------- p1_p2_rdb_pc board update net: fm: Verify Fman microcode --------------------------------------- CI: https://source.denx.de/u-boot/custodians/u-boot-fsl-qoriq/-/pipelines/13377 Thanks, Peng. The following changes since commit 59c51fa4abbca41d2a4d60c0fe4d8f05fc83fb46: Merge https://source.denx.de/u-boot/custodians/u-boot-riscv (2022-09-06 09:01:39 -0400) are available in the Git repository at: https://source.denx.de/u-boot/custodians/u-boot-fsl-qoriq.git tags/fsl-qoriq-2022-9-7 for you to fetch changes up to 857e313a3d44618e09fc64816fd5e561e2189ab7: net: fm: Add support for FIT firmware (2022-09-07 13:44:55 +0800) ---------------------------------------------------------------- Pali Rohár (3): board: freescale: p1_p2_rdb_pc: Add env commands norlowerboot, norupperboot, sd2boot and defboot board: freescale: p1_p2_rdb_pc: Delete watchdog max6370 node in load_default mode board: freescale: p1_p2_rdb_pc: Calculate offsets for eSDHC boot sector Sean Anderson (6): ARMv8/sec_firmware: Remove SEC_FIRMWARE_FIT_CNF_NAME image: fit: Add some helpers for getting data ARMv8/sec_firmware: Convert to use fit_get_data_conf_prop cmd: fpga: Convert to use fit_get_data_node net: Convert fit verification to use fit_get_data_* net: fm: Add support for FIT firmware arch/arm/cpu/armv8/sec_firmware.c | 52 ++++------------------------------------------------ board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c | 28 ++++++++++++++++++++++++++++ boot/image-fit.c | 37 +++++++++++++++++++++++++++++++++++++ cmd/fpga.c | 24 ++++++------------------ drivers/net/fm/fm.c | 18 ++++++++++++++++++ drivers/net/fsl-mc/mc.c | 30 +++--------------------------- drivers/net/pfe_eth/pfe_firmware.c | 40 +--------------------------------------- include/configs/p1_p2_bootsrc.h | 20 ++++++++++++++++++++ include/configs/p1_p2_rdb_pc.h | 17 +++++++++++++++++ include/image.h | 70 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 10 files changed, 204 insertions(+), 132 deletions(-)

5 7

[PATCH mpc85xx] powerpc: mpc85xx: Fix check for CONFIG_SDCARD
by Marek Behún 16 Sep '22

16 Sep '22

Commit d433c74eecdc ("Convert CONFIG_SDCARD et al to Kconfig") converted SYS_EXTRA_OPTIONS=SDCARD or SPIFLASH to config options CONFIG_SDCARD and CONFIG_SPIFLASH, but left one occurance unchanged. Fix this. Fixes: d433c74eecdc ("Convert CONFIG_SDCARD et al to Kconfig") Signed-off-by: Marek Behún <kabel(a)kernel.org> --- arch/powerpc/cpu/mpc85xx/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig index 085ddd8439..27f069a1fb 100644 --- a/arch/powerpc/cpu/mpc85xx/Kconfig +++ b/arch/powerpc/cpu/mpc85xx/Kconfig @@ -15,7 +15,7 @@ config CMD_ERRATA config FSL_PREPBL_ESDHC_BOOT_SECTOR bool "Generate QorIQ pre-PBL eSDHC boot sector" depends on MPC85xx - depends on SYS_EXTRA_OPTIONS = SDCARD + depends on SDCARD help With this option final image would have prepended QorIQ pre-PBL eSDHC boot sector suitable for SD card images. This boot sector instruct -- 2.35.1

2 1

[PATCH] arm: socfpga: soc64: Use UCLASS_MTD instead of UCLASS_MISC
by Jit Loon Lim 16 Sep '22

16 Sep '22

From: Ley Foon Tan <ley.foon.tan(a)intel.com> Commit 407b01b3b3f5 ("mtd: rawnand: denali_dt: use UCLASS_MTD instead of UCLASS_MISC") change to use UCLASS_MTD instead of UCLASS_MISC. Update spl_boot_device() to use UCLASS_MTD. Signed-off-by: Ley Foon Tan <ley.foon.tan(a)intel.com> Signed-off-by: Jit Loon Lim <jit.loon.lim(a)intel.com> --- arch/arm/mach-socfpga/spl_soc64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-socfpga/spl_soc64.c b/arch/arm/mach-socfpga/spl_soc64.c index ea1acaf309..38f69aa957 100644 --- a/arch/arm/mach-socfpga/spl_soc64.c +++ b/arch/arm/mach-socfpga/spl_soc64.c @@ -62,7 +62,7 @@ u32 spl_boot_device(void) switch (device_get_uclass_id(dev)) { case UCLASS_SPI_FLASH: return BOOT_DEVICE_SPI; - case UCLASS_MISC: + case UCLASS_MTD: return BOOT_DEVICE_NAND; case UCLASS_MMC: return BOOT_DEVICE_MMC1; -- 2.26.2

1 0

[PATCH 1/2] spl: socfpga: Getting SPL boot device from DT
by Jit Loon Lim 16 Sep '22

16 Sep '22

From: Tien Fong Chee <tien.fong.chee(a)intel.com> Current SPL boot device is harcoded with MMC1, this implementation would inhibit the support of other boot device. So, this patch is created to get the boot device from DT, user should define the boot device in property "u-boot,boot0". Default MMC1 would be boot device if no boot device is defined in DT. Signed-off-by: Tien Fong Chee <tien.fong.chee(a)intel.com> Signed-off-by: Jit Loon Lim <jit.loon.lim(a)intel.com> --- arch/arm/dts/socfpga_stratix10_socdk.dts | 1 + arch/arm/mach-socfpga/spl_s10.c | 65 ++++++++++++++++++++++++ 2 files changed, 66 insertions(+) diff --git a/arch/arm/dts/socfpga_stratix10_socdk.dts b/arch/arm/dts/socfpga_stratix10_socdk.dts index 8aa55a60ab..c8e9261f48 100755 --- a/arch/arm/dts/socfpga_stratix10_socdk.dts +++ b/arch/arm/dts/socfpga_stratix10_socdk.dts @@ -16,6 +16,7 @@ chosen { stdout-path = "serial0:115200n8"; + u-boot,boot0 = <&mmc>; }; leds { diff --git a/arch/arm/mach-socfpga/spl_s10.c b/arch/arm/mach-socfpga/spl_s10.c index dad2ac5d0d..c4b82ebf14 100644 --- a/arch/arm/mach-socfpga/spl_s10.c +++ b/arch/arm/mach-socfpga/spl_s10.c @@ -13,6 +13,8 @@ #include <asm/utils.h> #include <common.h> #include <debug_uart.h> +#include <dm.h> +#include <dm/ofnode.h> #include <image.h> #include <spl.h> #include <asm/arch/clock_manager.h> @@ -27,6 +29,69 @@ DECLARE_GLOBAL_DATA_PTR; +u32 spl_boot_device(void) +{ + int ret, size; + ofnode node; + const fdt32_t *phandle_p; + u32 phandle; + struct udevice *dev; + + node = ofnode_path("/chosen"); + if (!ofnode_valid(node)) { + debug("%s: /chosen node was not found.\n", __func__); + goto fallback; + } + + phandle_p = ofnode_get_property(node, "u-boot,boot0", &size); + if (!phandle_p) { + debug("%s: u-boot,boot0 property was not found.\n", + __func__); + goto fallback; + } + + phandle = fdt32_to_cpu(*phandle_p); + + node = ofnode_get_by_phandle(phandle); + + ret = device_get_global_by_ofnode(node, &dev); + if (ret) { + debug("%s: Boot device at not found, error: %d\n", __func__, + ret); + goto fallback; + } + + debug("%s: Found boot device %s\n", __func__, dev->name); + + switch (device_get_uclass_id(dev)) { + case UCLASS_SPI_FLASH: + return BOOT_DEVICE_SPI; + case UCLASS_MISC: + return BOOT_DEVICE_NAND; + case UCLASS_MMC: + return BOOT_DEVICE_MMC1; + default: + debug("%s: Booting from device uclass '%s' is not " + "supported\n", __func__, + dev_get_uclass_name(dev)); + } + +fallback: + /* Return default boot device */ + return BOOT_DEVICE_MMC1; +} + +#ifdef CONFIG_SPL_MMC_SUPPORT +u32 spl_mmc_boot_mode(const u32 boot_device) +{ +#if defined(CONFIG_SPL_FS_FAT) || defined(CONFIG_SPL_FS_EXT4) + return MMCSD_MODE_FS; +#else + return MMCSD_MODE_RAW; +#endif +} +#endif + void board_init_f(ulong dummy) { const struct cm_config *cm_default_cfg = cm_get_default_config(); -- 2.26.2

2 2

[PATCH] ddr: socfpga: Disable the useeccasdata when ECC is enabled
by teik.heng.chong＠intel.com 16 Sep '22

16 Sep '22

From: Tien Fong Chee <tien.fong.chee(a)intel.com> This field allows the FPGA ports to directly access the extra data bits that are normally used to hold the ECC code, so this field must be clear when it's used for ECC data. Signed-off-by: Tien Fong Chee <tien.fong.chee(a)intel.com> Signed-off-by: Teik Heng Chong <teik.heng.chong(a)intel.com> --- drivers/ddr/altera/sdram_gen5.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/ddr/altera/sdram_gen5.c b/drivers/ddr/altera/sdram_gen5.c index 9d69f009e9..085d146179 100644 --- a/drivers/ddr/altera/sdram_gen5.c +++ b/drivers/ddr/altera/sdram_gen5.c @@ -659,6 +659,9 @@ static int altera_gen5_sdram_probe(struct udevice *dev) debug("SDRAM: %ld MiB\n", sdram_size >> 20); if (sdram_is_ecc_enabled(sdr_ctrl)) { + /* Must set USEECCASDATA to 0 if ECC is enabled */ + clrbits_le32(&sdr_ctrl->static_cfg, + SDR_CTRLGRP_STATICCFG_USEECCASDATA_MASK); sdram_init_ecc_bits(sdram_size); } -- 2.26.2

1 0

[PATCH] nvmem: u-boot-env: find Device Tree nodes for NVMEM cells
by Rafał Miłecki 16 Sep '22

16 Sep '22

From: Rafał Miłecki <rafal(a)milecki.pl> DT binding allows specifying NVMEM cells as NVMEM device (provider) subnodes. Looks for such subnodes when building NVMEM cells. This allows NVMEM consumers to use U-Boot environment variables. Signed-off-by: Rafał Miłecki <rafal(a)milecki.pl> --- drivers/nvmem/u-boot-env.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/nvmem/u-boot-env.c b/drivers/nvmem/u-boot-env.c index 9b9abfb8f187..d17a164ae705 100644 --- a/drivers/nvmem/u-boot-env.c +++ b/drivers/nvmem/u-boot-env.c @@ -92,6 +92,7 @@ static int u_boot_env_add_cells(struct u_boot_env *priv, uint8_t *buf, return -ENOMEM; priv->cells[idx].offset = data_offset + value - data; priv->cells[idx].bytes = strlen(value); + priv->cells[idx].np = of_get_child_by_name(dev->of_node, priv->cells[idx].name); } if (WARN_ON(idx != priv->ncells)) -- 2.34.1

2 1

[PATCH 0/9] xilinx: versal-net: Add support for new Versal NET SoC
by Michal Simek 16 Sep '22

16 Sep '22

Hi, I am sending support for new Xilinx/AMD SoC called Versal NET. Versal NET is very similar to origin Versal SOC. There is different register layout, some IPs have been upgraded like i3c and some other changes in different location. Thanks, Michal Jay Buddhabhatti (4): clk: versal: Enable clock driver for Versal NET firmware: zynqmp: Add Versal NET compatible string mailbox: zynqmp: Enable ipi mailbox driver for Versal NET reset: zynqmp: Enable reset driver for Versal NET Michal Simek (5): arm64: versal-net: Add support for Versal NET platform spi: cadence_qspi: Add support for Versal NET platform spi: zynqmp_gqspi: Add support for Versal NET arm64: versal-net: Add defconfig for Versal NET arm64: versal-net: Add support for mini configuration Kconfig | 2 +- MAINTAINERS | 7 + arch/arm/Kconfig | 14 ++ arch/arm/Makefile | 1 + arch/arm/dts/Makefile | 3 + arch/arm/dts/versal-net-mini.dts | 67 +++++++ arch/arm/dts/xilinx-versal-net-virt.dts | 11 ++ arch/arm/mach-versal-net/Kconfig | 43 +++++ arch/arm/mach-versal-net/Makefile | 10 ++ arch/arm/mach-versal-net/clk.c | 35 ++++ arch/arm/mach-versal-net/cpu.c | 89 +++++++++ .../mach-versal-net/include/mach/hardware.h | 31 ++++ .../mach-versal-net/include/mach/sys_proto.h | 16 ++ board/xilinx/Kconfig | 6 +- board/xilinx/versal-net/Kconfig | 9 + board/xilinx/versal-net/MAINTAINERS | 8 + board/xilinx/versal-net/Makefile | 9 + board/xilinx/versal-net/board.c | 170 ++++++++++++++++++ configs/xilinx_versal_net_mini_defconfig | 70 ++++++++ configs/xilinx_versal_net_virt_defconfig | 118 ++++++++++++ drivers/clk/Kconfig | 2 +- drivers/clk/clk_versal.c | 1 + drivers/firmware/firmware-zynqmp.c | 1 + drivers/mailbox/Kconfig | 2 +- drivers/reset/reset-zynqmp.c | 1 + drivers/spi/Kconfig | 2 +- drivers/spi/cadence_ospi_versal.c | 3 +- drivers/spi/zynqmp_gqspi.c | 3 +- env/Kconfig | 6 +- include/configs/xilinx_versal_net.h | 156 ++++++++++++++++ include/configs/xilinx_versal_net_mini.h | 28 +++ 31 files changed, 912 insertions(+), 12 deletions(-) create mode 100644 arch/arm/dts/versal-net-mini.dts create mode 100644 arch/arm/dts/xilinx-versal-net-virt.dts create mode 100644 arch/arm/mach-versal-net/Kconfig create mode 100644 arch/arm/mach-versal-net/Makefile create mode 100644 arch/arm/mach-versal-net/clk.c create mode 100644 arch/arm/mach-versal-net/cpu.c create mode 100644 arch/arm/mach-versal-net/include/mach/hardware.h create mode 100644 arch/arm/mach-versal-net/include/mach/sys_proto.h create mode 100644 board/xilinx/versal-net/Kconfig create mode 100644 board/xilinx/versal-net/MAINTAINERS create mode 100644 board/xilinx/versal-net/Makefile create mode 100644 board/xilinx/versal-net/board.c create mode 100644 configs/xilinx_versal_net_mini_defconfig create mode 100644 configs/xilinx_versal_net_virt_defconfig create mode 100644 include/configs/xilinx_versal_net.h create mode 100644 include/configs/xilinx_versal_net_mini.h -- 2.36.1

2 10