July 2022 - U-Boot

[PATCH 1/1] MAINTAINERS: add Ilias Apalodimas to EFI PAYLOAD as co-maintainer
by Heinrich Schuchardt 12 Jul '22

12 Jul '22

Ilias has since long been reviewing UEFI patches. Now he has volunteered to assist me in maintaining the sub-system. Cc: Ilias Apalodimas <ilias.apalodimas(a)linaro.org> Signed-off-by: Heinrich Schuchardt <xypron.glpk(a)gmx.de> --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index 1baa038da7..2515ce7da3 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -827,6 +827,7 @@ F: test/dm/efi_media.c EFI PAYLOAD M: Heinrich Schuchardt <xypron.glpk(a)gmx.de> +M: Ilias Apalodimas <ilias.apalodimas(a)linaro.org> S: Maintained T: git https://source.denx.de/u-boot/custodians/u-boot-efi.git F: doc/api/efi.rst -- 2.36.1

2 1

[PATCH] configs: stm32m15: support STM32MP_BOARD_EXTRA_ENV for st boards
by Patrick Delaunay 12 Jul '22

12 Jul '22

Correctly handle STM32MP_BOARD_EXTRA_ENV define in stm32mp15_st_common.h; the STM32MP_BOARD_EXTRA_ENV is added in CONFIG_EXTRA_ENV_SETTINGS definition, as it is done "stm32mp15_st_common.h" Without this patch, the content of STM32MP_BOARD_EXTRA_ENV is not used in the default environment for STMicroelectronics boards. Fixes: 806c4dd31532 ("configs: stm32mp1: set the console variable for extlinux.conf") Reported-by: Gatien CHEVALLIER <gatien.chevallier(a)foss.st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay(a)foss.st.com> --- include/configs/stm32mp15_st_common.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/include/configs/stm32mp15_st_common.h b/include/configs/stm32mp15_st_common.h index 37b216e6e9f..6bdc286cfca 100644 --- a/include/configs/stm32mp15_st_common.h +++ b/include/configs/stm32mp15_st_common.h @@ -48,7 +48,8 @@ ST_STM32MP1_BOOTCMD \ STM32MP_PARTS_DEFAULT \ BOOTENV \ - STM32MP_EXTRA + STM32MP_EXTRA \ + STM32MP_BOARD_EXTRA_ENV #endif #endif -- 2.25.1

1 1

[PATCH v2 0/9] New boards support: db845c and qcs404-evb
by Sumit Garg 12 Jul '22

12 Jul '22

Add support for two new boards db845c and qcs404-evb: - db845c is a 96boards compliant platform aka RB3 based on Qualcomm SDM845 SoC. - qcs404-evb is an evaluation board from Qualcomm based on QCS404 SoC. Both these platforms have one thing in common that u-boot is chain-loaded in 64-bit mode via Android Boot Loader (ABL) which is an EFI application. For further details on chain-loading refer to platform specific documentation: - doc/board/qualcomm/sdm845.rst - doc/board/qualcomm/qcs404.rst Changes in v2: - Added patch #1 to fix DT node overrides in starqltechn-uboot.dtsi. - Updated patch #2 commit description. - Fixed a typo (s/96Board/96Boards/) in patch #5. Sumit Garg (9): board: starqltechn: Align DT node overrides with sdm845.dtsi arm64: dts: sdm845: Remove redundant u-boot DT properties clocks: sdm845: Import qcom,gcc-sdm845.h uart: sdm845: Fix debug UART pinmux board: qualcomm: Add support for dragonboard845c mmc: msm_sdhci: Add SDCC version 5.0.0 support pinctrl: qcom: Add pinctrl driver for QCS404 SoC clocks: qcom: Add clock driver for QCS404 SoC board: qualcomm: Add support for QCS404 EVB arch/arm/dts/Makefile | 1 + arch/arm/dts/dragonboard845c-uboot.dtsi | 37 +++ arch/arm/dts/dragonboard845c.dts | 44 ++++ arch/arm/dts/qcs404-evb-uboot.dtsi | 24 ++ arch/arm/dts/qcs404-evb.dts | 81 ++++++ arch/arm/dts/sdm845.dtsi | 8 +- arch/arm/dts/starqltechn-uboot.dtsi | 18 +- arch/arm/dts/starqltechn.dts | 2 +- arch/arm/mach-snapdragon/Kconfig | 25 ++ arch/arm/mach-snapdragon/Makefile | 3 + arch/arm/mach-snapdragon/clock-qcs404.c | 30 +++ arch/arm/mach-snapdragon/clock-sdm845.c | 3 +- arch/arm/mach-snapdragon/clock-snapdragon.c | 1 + .../include/mach/sysmap-qcs404.h | 13 + arch/arm/mach-snapdragon/pinctrl-qcs404.c | 55 ++++ arch/arm/mach-snapdragon/pinctrl-snapdragon.c | 1 + arch/arm/mach-snapdragon/pinctrl-snapdragon.h | 1 + arch/arm/mach-snapdragon/sysmap-qcs404.c | 31 +++ board/qualcomm/dragonboard845c/Kconfig | 12 + board/qualcomm/dragonboard845c/MAINTAINERS | 6 + board/qualcomm/dragonboard845c/Makefile | 9 + board/qualcomm/dragonboard845c/db845c.its | 63 +++++ .../dragonboard845c/dragonboard845c.c | 9 + board/qualcomm/qcs404-evb/Kconfig | 15 ++ board/qualcomm/qcs404-evb/MAINTAINERS | 6 + board/qualcomm/qcs404-evb/Makefile | 6 + board/qualcomm/qcs404-evb/qcs404-evb.c | 33 +++ board/qualcomm/qcs404-evb/qcs404-evb.its | 64 +++++ configs/dragonboard845c_defconfig | 28 ++ configs/qcs404evb_defconfig | 39 +++ doc/board/qualcomm/index.rst | 1 + doc/board/qualcomm/qcs404.rst | 79 ++++++ doc/board/qualcomm/sdm845.rst | 100 ++++++- drivers/mmc/msm_sdhci.c | 96 ++++--- include/configs/dragonboard845c.h | 28 ++ include/configs/qcs404-evb.h | 27 ++ include/dt-bindings/clock/qcom,gcc-qcs404.h | 180 +++++++++++++ include/dt-bindings/clock/qcom,gcc-sdm845.h | 246 ++++++++++++++++++ 38 files changed, 1363 insertions(+), 62 deletions(-) create mode 100644 arch/arm/dts/dragonboard845c-uboot.dtsi create mode 100644 arch/arm/dts/dragonboard845c.dts create mode 100644 arch/arm/dts/qcs404-evb-uboot.dtsi create mode 100644 arch/arm/dts/qcs404-evb.dts create mode 100644 arch/arm/mach-snapdragon/clock-qcs404.c create mode 100644 arch/arm/mach-snapdragon/include/mach/sysmap-qcs404.h create mode 100644 arch/arm/mach-snapdragon/pinctrl-qcs404.c create mode 100644 arch/arm/mach-snapdragon/sysmap-qcs404.c create mode 100644 board/qualcomm/dragonboard845c/Kconfig create mode 100644 board/qualcomm/dragonboard845c/MAINTAINERS create mode 100644 board/qualcomm/dragonboard845c/Makefile create mode 100644 board/qualcomm/dragonboard845c/db845c.its create mode 100644 board/qualcomm/dragonboard845c/dragonboard845c.c create mode 100644 board/qualcomm/qcs404-evb/Kconfig create mode 100644 board/qualcomm/qcs404-evb/MAINTAINERS create mode 100644 board/qualcomm/qcs404-evb/Makefile create mode 100644 board/qualcomm/qcs404-evb/qcs404-evb.c create mode 100644 board/qualcomm/qcs404-evb/qcs404-evb.its create mode 100644 configs/dragonboard845c_defconfig create mode 100644 configs/qcs404evb_defconfig create mode 100644 doc/board/qualcomm/qcs404.rst create mode 100644 include/configs/dragonboard845c.h create mode 100644 include/configs/qcs404-evb.h create mode 100644 include/dt-bindings/clock/qcom,gcc-qcs404.h create mode 100644 include/dt-bindings/clock/qcom,gcc-sdm845.h -- 2.25.1

3 22

[PATCH V4 resend] spl: imx8mm: enlarge SPL_MAX_SIZE
by Peng Fan (OSS) 12 Jul '22

12 Jul '22

From: Peng Fan <peng.fan(a)nxp.com> The CONFIG_SPL_MAX_SIZE could be 0x27000 for i.MX8MM when SPL_TEXT_BASE set to 0x7E1000. The DDR firmware max uses 96KB, there is a 4KB padding header before SPL_TEXT_BASE, so the SPL MAX SIZE is `256KB - 96KB - 4KB`. Signed-off-by: Peng Fan <peng.fan(a)nxp.com> --- V4 resend: Hi Stefano, this patch is to replace https://patchwork.ozlabs.org/project/uboot/patch/20220705060644.4509-2-peng… I rebased with Tom's next branch, only this patch has conflict, so I redo this patch. Thanks, Peng. common/spl/Kconfig | 1 + configs/imx8mm-cl-iot-gate-optee_defconfig | 1 - configs/imx8mm-cl-iot-gate_defconfig | 1 - configs/imx8mm-icore-mx8mm-ctouch2_defconfig | 1 - configs/imx8mm-icore-mx8mm-edimm2.2_defconfig | 1 - configs/imx8mm-mx8menlo_defconfig | 1 - configs/imx8mm_beacon_defconfig | 1 - configs/imx8mm_data_modul_edm_sbc_defconfig | 1 - configs/imx8mm_evk_defconfig | 1 - configs/imx8mm_venice_defconfig | 1 - configs/kontron-sl-mx8mm_defconfig | 1 - configs/phycore-imx8mm_defconfig | 1 - configs/verdin-imx8mm_defconfig | 1 - 13 files changed, 1 insertion(+), 12 deletions(-) diff --git a/common/spl/Kconfig b/common/spl/Kconfig index 931619c366f..16939bac11f 100644 --- a/common/spl/Kconfig +++ b/common/spl/Kconfig @@ -83,6 +83,7 @@ config SPL_MAX_SIZE default 0x7000 if RCAR_GEN3 default 0x5fa0 if SUNXI_SRAM_ADDRESS = 0x0 default 0x10000 if ASPEED_AST2600 + default 0x27000 if IMX8MM && SPL_TEXT_BASE = 0x7E1000 default 0x0 help Maximum size of the SPL image (text, data, rodata, and linker lists diff --git a/configs/imx8mm-cl-iot-gate-optee_defconfig b/configs/imx8mm-cl-iot-gate-optee_defconfig index 2a209bcfe47..3476eae82f8 100644 --- a/configs/imx8mm-cl-iot-gate-optee_defconfig +++ b/configs/imx8mm-cl-iot-gate-optee_defconfig @@ -23,7 +23,6 @@ CONFIG_SPL_LOAD_FIT=y # CONFIG_USE_SPL_FIT_GENERATOR is not set CONFIG_OF_SYSTEM_SETUP=y CONFIG_BOARD_LATE_INIT=y -CONFIG_SPL_MAX_SIZE=0x25000 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y CONFIG_SPL_BSS_START_ADDR=0x910000 CONFIG_SPL_BSS_MAX_SIZE=0x2000 diff --git a/configs/imx8mm-cl-iot-gate_defconfig b/configs/imx8mm-cl-iot-gate_defconfig index 07084988139..7e7a59ffb3c 100644 --- a/configs/imx8mm-cl-iot-gate_defconfig +++ b/configs/imx8mm-cl-iot-gate_defconfig @@ -25,7 +25,6 @@ CONFIG_SPL_LOAD_FIT=y # CONFIG_USE_SPL_FIT_GENERATOR is not set CONFIG_OF_SYSTEM_SETUP=y CONFIG_BOARD_LATE_INIT=y -CONFIG_SPL_MAX_SIZE=0x25000 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y CONFIG_SPL_BSS_START_ADDR=0x910000 CONFIG_SPL_BSS_MAX_SIZE=0x2000 diff --git a/configs/imx8mm-icore-mx8mm-ctouch2_defconfig b/configs/imx8mm-icore-mx8mm-ctouch2_defconfig index 7040d782ef6..b9fb3c69cb7 100644 --- a/configs/imx8mm-icore-mx8mm-ctouch2_defconfig +++ b/configs/imx8mm-icore-mx8mm-ctouch2_defconfig @@ -23,7 +23,6 @@ CONFIG_SPL_LOAD_FIT=y CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-imx/mkimage_fit_atf.sh" CONFIG_OF_SYSTEM_SETUP=y CONFIG_DEFAULT_FDT_FILE="imx8mm-icore-mx8mm-ctouch2.dtb" -CONFIG_SPL_MAX_SIZE=0x25000 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y CONFIG_SPL_BSS_START_ADDR=0x910000 CONFIG_SPL_BSS_MAX_SIZE=0x2000 diff --git a/configs/imx8mm-icore-mx8mm-edimm2.2_defconfig b/configs/imx8mm-icore-mx8mm-edimm2.2_defconfig index 0488ec223f0..1149bb68c04 100644 --- a/configs/imx8mm-icore-mx8mm-edimm2.2_defconfig +++ b/configs/imx8mm-icore-mx8mm-edimm2.2_defconfig @@ -23,7 +23,6 @@ CONFIG_SPL_LOAD_FIT=y CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-imx/mkimage_fit_atf.sh" CONFIG_OF_SYSTEM_SETUP=y CONFIG_DEFAULT_FDT_FILE="imx8mm-icore-mx8mm-edimm2.2.dtb" -CONFIG_SPL_MAX_SIZE=0x25000 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y CONFIG_SPL_BSS_START_ADDR=0x910000 CONFIG_SPL_BSS_MAX_SIZE=0x2000 diff --git a/configs/imx8mm-mx8menlo_defconfig b/configs/imx8mm-mx8menlo_defconfig index ec672f8764e..2a6f3b7c412 100644 --- a/configs/imx8mm-mx8menlo_defconfig +++ b/configs/imx8mm-mx8menlo_defconfig @@ -34,7 +34,6 @@ CONFIG_LOG=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_BOARD_LATE_INIT=y -CONFIG_SPL_MAX_SIZE=0x25000 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y CONFIG_SPL_BSS_START_ADDR=0x910000 CONFIG_SPL_BSS_MAX_SIZE=0x2000 diff --git a/configs/imx8mm_beacon_defconfig b/configs/imx8mm_beacon_defconfig index 1a0672879e5..6d8fc9a27cf 100644 --- a/configs/imx8mm_beacon_defconfig +++ b/configs/imx8mm_beacon_defconfig @@ -25,7 +25,6 @@ CONFIG_OF_SYSTEM_SETUP=y CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; fi;" CONFIG_DEFAULT_FDT_FILE="imx8mm-beacon-kit.dtb" -CONFIG_SPL_MAX_SIZE=0x25000 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y CONFIG_SPL_BSS_START_ADDR=0x910000 CONFIG_SPL_BSS_MAX_SIZE=0x2000 diff --git a/configs/imx8mm_data_modul_edm_sbc_defconfig b/configs/imx8mm_data_modul_edm_sbc_defconfig index da59e4c7adf..b40e4e1e207 100644 --- a/configs/imx8mm_data_modul_edm_sbc_defconfig +++ b/configs/imx8mm_data_modul_edm_sbc_defconfig @@ -41,7 +41,6 @@ CONFIG_CONSOLE_MUX=y CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y CONFIG_ARCH_MISC_INIT=y CONFIG_BOARD_LATE_INIT=y -CONFIG_SPL_MAX_SIZE=0x25000 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y CONFIG_SPL_BSS_START_ADDR=0x910000 CONFIG_SPL_BSS_MAX_SIZE=0x2000 diff --git a/configs/imx8mm_evk_defconfig b/configs/imx8mm_evk_defconfig index 00af724bbaa..24bb136c7ad 100644 --- a/configs/imx8mm_evk_defconfig +++ b/configs/imx8mm_evk_defconfig @@ -23,7 +23,6 @@ CONFIG_SPL_LOAD_FIT=y # CONFIG_USE_SPL_FIT_GENERATOR is not set CONFIG_OF_SYSTEM_SETUP=y CONFIG_BOARD_LATE_INIT=y -CONFIG_SPL_MAX_SIZE=0x25000 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y CONFIG_SPL_BSS_START_ADDR=0x910000 CONFIG_SPL_BSS_MAX_SIZE=0x2000 diff --git a/configs/imx8mm_venice_defconfig b/configs/imx8mm_venice_defconfig index 49b36e0c8f4..ac0cee9705b 100644 --- a/configs/imx8mm_venice_defconfig +++ b/configs/imx8mm_venice_defconfig @@ -31,7 +31,6 @@ CONFIG_OF_SYSTEM_SETUP=y CONFIG_USE_PREBOOT=y CONFIG_PREBOOT="gsc wd-disable" CONFIG_BOARD_LATE_INIT=y -CONFIG_SPL_MAX_SIZE=0x25000 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y CONFIG_SPL_BSS_START_ADDR=0x910000 CONFIG_SPL_BSS_MAX_SIZE=0x2000 diff --git a/configs/kontron-sl-mx8mm_defconfig b/configs/kontron-sl-mx8mm_defconfig index 17658d5334d..ec0c1d7f50d 100644 --- a/configs/kontron-sl-mx8mm_defconfig +++ b/configs/kontron-sl-mx8mm_defconfig @@ -26,7 +26,6 @@ CONFIG_SPL_LOAD_FIT=y # CONFIG_USE_SPL_FIT_GENERATOR is not set CONFIG_OF_BOARD_SETUP=y CONFIG_BOARD_TYPES=y -CONFIG_SPL_MAX_SIZE=0x25000 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y CONFIG_SPL_BSS_START_ADDR=0x910000 CONFIG_SPL_BSS_MAX_SIZE=0x2000 diff --git a/configs/phycore-imx8mm_defconfig b/configs/phycore-imx8mm_defconfig index 0316d45caeb..3a169692735 100644 --- a/configs/phycore-imx8mm_defconfig +++ b/configs/phycore-imx8mm_defconfig @@ -26,7 +26,6 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadimage; then run mmcboot; else run netboot; fi; fi;" CONFIG_DEFAULT_FDT_FILE="oftree" CONFIG_BOARD_LATE_INIT=y -CONFIG_SPL_MAX_SIZE=0x25000 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y CONFIG_SPL_BSS_START_ADDR=0x910000 CONFIG_SPL_BSS_MAX_SIZE=0x2000 diff --git a/configs/verdin-imx8mm_defconfig b/configs/verdin-imx8mm_defconfig index 34afdc57911..8c5274d33f1 100644 --- a/configs/verdin-imx8mm_defconfig +++ b/configs/verdin-imx8mm_defconfig @@ -32,7 +32,6 @@ CONFIG_LOG=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_BOARD_LATE_INIT=y -CONFIG_SPL_MAX_SIZE=0x25000 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y CONFIG_SPL_BSS_START_ADDR=0x910000 CONFIG_SPL_BSS_MAX_SIZE=0x2000 -- 2.36.0

2 1

[PATCH v1] arm: relocate: Replace ADR instruction with non-pseudo-instruction
by Jesse Taube 11 Jul '22

11 Jul '22

In Binutils 2.37 the ADR instruction has changed use alternate instructions. The change causes armv7-m to not boot. Signed-off-by: Jesse Taube <Mr.Bossman075(a)gmail.com> --- arch/arm/lib/relocate.S | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/arch/arm/lib/relocate.S b/arch/arm/lib/relocate.S index 14b7f61c1a..22c419534f 100644 --- a/arch/arm/lib/relocate.S +++ b/arch/arm/lib/relocate.S @@ -78,7 +78,13 @@ ENDPROC(relocate_vectors) */ ENTRY(relocate_code) - adr r3, relocate_code +/* + * Binutils doesn't comply with the arm docs for adr in thumb2 + * from commit d3e52e120b68bf19552743fbc078e0a759f48cb7 onward + * to remove ambiguity explicitly define the pseudo-instruction + */ + mov r3, pc + subs r3, #4 ldr r1, _image_copy_start_ofs add r1, r3 /* r1 <- Run &__image_copy_start */ subs r4, r0, r1 /* r4 <- Run to copy offset */ -- 2.36.1

3 7

[PATCH v4 0/7] Add support for FlexSPI Boot for i.MX8m
by Mamta Shukla 11 Jul '22

11 Jul '22

This series of patch adds support for generating FlexSPI Header file and booting from QSPI on i.MX8m. Changes in v2: -Add check for error in case open() for fspi_fd in imx8mkimage.c fails -Remove extra line in commit message -Remove extra line in imx8mm_evk_fspi_defconfig -New patch in series to add an entry for imx8mm_evk_fspi_defconfig in board/freescale/imx8mm_evk/MAINTAINERS -New patch in series to add instructions to build and boot from QSPI Flash Changes in v3: -Fix Checkpatch ERROR: code indent should use tabs where possible -Fix Checkpatch ERROR for trailing spaces Changes in v4: -Add condition for CONFIG_SYS_UBOOT_BASE for mmc/sd card build -Define QPSI0_AMBA_BASE in imx-regs.h since it is imx8mm specific Mamta Shukla (7): tools: mkimage: Add support to generate FlexSPI Header for i.MX8m dts: imx8mm-uboot: Add support to pack FlexSPI Header using binman configs: Add config for enabling FSPI boot option for i.MX8m board: freescale: Add QSPI Boot support in spl for i.MX8m configs: imx8mm: Define CONFIG_SYS_UBOOT_BASE for i.MX8m board: freescale: Add entry for imx8mm_evk_fspi_defconfig doc: board: nxp: Add instructions to boot from QSPI arch/arm/dts/imx8mm-u-boot.dtsi | 20 +++ arch/arm/include/asm/arch-imx8m/imx-regs.h | 1 + board/freescale/imx8mm_evk/MAINTAINERS | 1 + .../imx8mm_evk/imximage-8mm-lpddr4-fspi.cfg | 9 ++ board/freescale/imx8mm_evk/spl.c | 2 + configs/imx8mm_evk_fspi_defconfig | 115 ++++++++++++++++++ doc/board/nxp/imx8mm_evk.rst | 37 +++++- include/configs/imx8mm_evk.h | 12 +- include/imximage.h | 38 ++++++ tools/Kconfig | 59 +++++++++ tools/imx8mimage.c | 81 +++++++++++- 11 files changed, 368 insertions(+), 7 deletions(-) create mode 100644 board/freescale/imx8mm_evk/imximage-8mm-lpddr4-fspi.cfg create mode 100644 configs/imx8mm_evk_fspi_defconfig -- 2.25.1

3 10

[PATCH 1/3] doc: environment: Drop u-boot_addr_r
by Tom Rini 11 Jul '22

11 Jul '22

This variable is never set nor explained why it would be set, drop it. Reviewed-by: Simon Glass <sjg(a)chromium.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk(a)gmx.de> Signed-off-by: Tom Rini <trini(a)konsulko.com> --- Changes in v2: - None --- doc/usage/environment.rst | 1 - 1 file changed, 1 deletion(-) diff --git a/doc/usage/environment.rst b/doc/usage/environment.rst index 28a8952b7528..a3f23d4e4e22 100644 --- a/doc/usage/environment.rst +++ b/doc/usage/environment.rst @@ -390,7 +390,6 @@ in U-Boot code. ================= ============== ================ ============== Image File Name RAM Address Flash Location ================= ============== ================ ============== -u-boot u-boot u-boot_addr_r u-boot_addr Linux kernel bootfile kernel_addr_r kernel_addr device tree blob fdtfile fdt_addr_r fdt_addr ramdisk ramdiskfile ramdisk_addr_r ramdisk_addr -- 2.25.1

1 2

imx8m read boot ROM log issue
by Belisko Marek 11 Jul '22

11 Jul '22

Hi, I'm trying to add support for reading imx8mq boot ROM event log and got inspired by this patch: https://lists.denx.de/pipermail/u-boot/2021-July/453318.html My question is if the condition for checking log pointers is correct: /* If the ROM event log pointer is not valid. */ if (*rom_log_addr < 0x900000 || *rom_log_addr >= 0xb00000 || *rom_log_addr & 0x3) return part; rom_load_addr is set at the beginning of function to 0x9E0 which is offset in OCRAM. Then the value from this address is checked by the above condition and in my experiments function always returns in this particular line (I'm getting a value e.g. 0x710004bf at address 0x9e0) dueto the fact that this condition is never met. So my question is if I'm doing something wrong or I simply don't understand the code :) Thanks and regards, marek -- as simple and primitive as possible ------------------------------------------------- Marek Belisko - OPEN-NANDRA Freelance Developer Ruska Nova Ves 219 | Presov, 08005 Slovak Republic Tel: +421 915 052 184 skype: marekwhite twitter: #opennandra web: http://open-nandra.com

1 0

[ANN] U-Boot v2022.07 released
by Tom Rini 11 Jul '22

11 Jul '22

Hey all, It's a week after the initially scheduled release day, but the last week was as quiet as I expected, so now we're releasing v2022.07. At this point, the DM_ETH migration is 2 years past the deadline, and I have sent some off-list reminders about migration earlier in the year. One of my early tasks for this next release is posting some driver removal patches as a last call for migration. Looking at the v2022.04 release email, I've made more progress on CONFIG migrations and others have joined in (thanks!) but there's still much to be done, and we still need some buildman work so that genboards.py can be fully retired. On a somewhat related note, my goal for the next release is to migrate our wiki content (which people had noted went missing for a bit during this cycle) to rST and our documentation site. In terms of a changelog, git log --merges v2022.07-rc6..v2022.07 contains what I've pulled since the last RC or: git log --merges v2022.04..v2022.07 for changes since the last full release. As always, more details in pull requests (or the tags referenced by them) will result in more details here. And now the merge window continues to be open and I'll merge next in to master shortly. v2022.10 is scheduled for release on Monday, October 3rd 2022 and the merge window closes on July 25th. Thanks all! -- Tom

2 1

[PATCH 0/8] New boards support: db845c and qcs404-evb
by Sumit Garg 11 Jul '22

11 Jul '22

Add support for two new boards db845c and qcs404-evb: - db845c is a 96boards compliant platform aka RB3 based on Qualcomm SDM845 SoC. - qcs404-evb is an evaluation board from Qualcomm based on QCS404 SoC. Both these platforms have one thing in common that u-boot is chain-loaded in 64-bit mode via Android Boot Loader (ABL) which is an EFI application. Sumit Garg (8): arm64: dts: sdm845: Remove redundant u-boot DT properties clocks: sdm845: Import qcom,gcc-sdm845.h uart: sdm845: Fix debug UART pinmux board: qualcomm: Add support for dragonboard845c mmc: msm_sdhci: Add SDCC version 5.0.0 support pinctrl: qcom: Add pinctrl driver for QCS404 SoC clocks: qcom: Add clock driver for QCS404 SoC board: qualcomm: Add support for QCS404 EVB arch/arm/dts/Makefile | 1 + arch/arm/dts/dragonboard845c-uboot.dtsi | 37 +++ arch/arm/dts/dragonboard845c.dts | 44 ++++ arch/arm/dts/qcs404-evb-uboot.dtsi | 24 ++ arch/arm/dts/qcs404-evb.dts | 81 ++++++ arch/arm/dts/sdm845.dtsi | 8 +- arch/arm/mach-snapdragon/Kconfig | 25 ++ arch/arm/mach-snapdragon/Makefile | 3 + arch/arm/mach-snapdragon/clock-qcs404.c | 30 +++ arch/arm/mach-snapdragon/clock-sdm845.c | 3 +- arch/arm/mach-snapdragon/clock-snapdragon.c | 1 + .../include/mach/sysmap-qcs404.h | 13 + arch/arm/mach-snapdragon/pinctrl-qcs404.c | 55 ++++ arch/arm/mach-snapdragon/pinctrl-snapdragon.c | 1 + arch/arm/mach-snapdragon/pinctrl-snapdragon.h | 1 + arch/arm/mach-snapdragon/sysmap-qcs404.c | 31 +++ board/qualcomm/dragonboard845c/Kconfig | 12 + board/qualcomm/dragonboard845c/MAINTAINERS | 6 + board/qualcomm/dragonboard845c/Makefile | 9 + board/qualcomm/dragonboard845c/db845c.its | 63 +++++ .../dragonboard845c/dragonboard845c.c | 9 + board/qualcomm/qcs404-evb/Kconfig | 15 ++ board/qualcomm/qcs404-evb/MAINTAINERS | 6 + board/qualcomm/qcs404-evb/Makefile | 6 + board/qualcomm/qcs404-evb/qcs404-evb.c | 33 +++ board/qualcomm/qcs404-evb/qcs404-evb.its | 64 +++++ configs/dragonboard845c_defconfig | 28 ++ configs/qcs404evb_defconfig | 39 +++ doc/board/qualcomm/index.rst | 1 + doc/board/qualcomm/qcs404.rst | 79 ++++++ doc/board/qualcomm/sdm845.rst | 100 ++++++- drivers/mmc/msm_sdhci.c | 96 ++++--- include/configs/dragonboard845c.h | 28 ++ include/configs/qcs404-evb.h | 27 ++ include/dt-bindings/clock/qcom,gcc-qcs404.h | 180 +++++++++++++ include/dt-bindings/clock/qcom,gcc-sdm845.h | 246 ++++++++++++++++++ 36 files changed, 1354 insertions(+), 51 deletions(-) create mode 100644 arch/arm/dts/dragonboard845c-uboot.dtsi create mode 100644 arch/arm/dts/dragonboard845c.dts create mode 100644 arch/arm/dts/qcs404-evb-uboot.dtsi create mode 100644 arch/arm/dts/qcs404-evb.dts create mode 100644 arch/arm/mach-snapdragon/clock-qcs404.c create mode 100644 arch/arm/mach-snapdragon/include/mach/sysmap-qcs404.h create mode 100644 arch/arm/mach-snapdragon/pinctrl-qcs404.c create mode 100644 arch/arm/mach-snapdragon/sysmap-qcs404.c create mode 100644 board/qualcomm/dragonboard845c/Kconfig create mode 100644 board/qualcomm/dragonboard845c/MAINTAINERS create mode 100644 board/qualcomm/dragonboard845c/Makefile create mode 100644 board/qualcomm/dragonboard845c/db845c.its create mode 100644 board/qualcomm/dragonboard845c/dragonboard845c.c create mode 100644 board/qualcomm/qcs404-evb/Kconfig create mode 100644 board/qualcomm/qcs404-evb/MAINTAINERS create mode 100644 board/qualcomm/qcs404-evb/Makefile create mode 100644 board/qualcomm/qcs404-evb/qcs404-evb.c create mode 100644 board/qualcomm/qcs404-evb/qcs404-evb.its create mode 100644 configs/dragonboard845c_defconfig create mode 100644 configs/qcs404evb_defconfig create mode 100644 doc/board/qualcomm/qcs404.rst create mode 100644 include/configs/dragonboard845c.h create mode 100644 include/configs/qcs404-evb.h create mode 100644 include/dt-bindings/clock/qcom,gcc-qcs404.h create mode 100644 include/dt-bindings/clock/qcom,gcc-sdm845.h -- 2.25.1

4 16