March 2022 - U-Boot

[PATCH] tools/mrvl_uart.sh: Remove script
by Pali Rohár 21 Apr '22

21 Apr '22

There are two tools for sending images over UART to Marvell SoCs: kwboot and mrvl_uart.sh. kwboot received lot of new features and improvements in last few months. There is no need to maintain two tools in U-Boot, so remove old mrvl_uart.sh tool. Signed-off-by: Pali Rohár <pali(a)kernel.org> --- tools/mrvl_uart.sh | 119 --------------------------------------------- 1 file changed, 119 deletions(-) delete mode 100755 tools/mrvl_uart.sh diff --git a/tools/mrvl_uart.sh b/tools/mrvl_uart.sh deleted file mode 100755 index a46411fc99fb..000000000000 --- a/tools/mrvl_uart.sh +++ /dev/null @@ -1,119 +0,0 @@ -#!/bin/bash -# SPDX-License-Identifier: GPL-2.0 -# -###################################################### -# Copyright (C) 2016 Marvell International Ltd. -# -# https://spdx.org/licenses -# -# Author: Konstantin Porotchkin kostap(a)marvell.com -# -# Version 0.3 -# -# UART recovery downloader for Armada SoCs -# -###################################################### - -port=$1 -file=$2 -speed=$3 - -pattern_repeat=1500 -default_baudrate=115200 -tmpfile=/tmp/xmodem.pattern -tools=( dd stty sx minicom ) - -case "$3" in - 2) - fast_baudrate=230400 - prefix="\xF2" - ;; - 4) - fast_baudrate=460800 - prefix="\xF4" - ;; - 8) - fast_baudrate=921600 - prefix="\xF8" - ;; - *) - fast_baudrate=$default_baudrate - prefix="\xBB" -esac - -if [[ -z "$port" || -z "$file" ]] -then - echo -e "\nMarvell recovery image downloader for Armada SoC family." - echo -e "Command syntax:" - echo -e "\t$(basename $0) <port> <file> [2|4|8]" - echo -e "\tport - serial port the target board is connected to" - echo -e "\tfile - recovery boot image for target download" - echo -e "\t2|4|8 - times to increase the default serial port speed by" - echo -e "For example - load the image over ttyUSB0 @ 460800 baud:" - echo -e "$(basename $0) /dev/ttyUSB0 /tmp/flash-image.bin 4\n" - echo -e "=====WARNING=====" - echo -e "- The speed-up option is not available in SoC families prior to A8K+" - echo -e "- This utility is not compatible with Armada 37xx SoC family\n" -fi - -# Sanity checks -if [ -c "$port" ] -then - echo -e "Using device connected on serial port \"$port\"" -else - echo "Wrong serial port name!" - exit 1 -fi - -if [ -f "$file" ] -then - echo -e "Loading flash image file \"$file\"" -else - echo "File $file does not exist!" - exit 1 -fi - -# Verify required tools installation -for tool in ${tools[@]} -do - toolname=`which $tool` - if [ -z "$toolname" ] - then - echo -e "Missing installation of \"$tool\" --> Exiting" - exit 1 - fi -done - - -echo -e "Recovery will run at $fast_baudrate baud" -echo -e "========================================" - -if [ -f "$tmpfile" ] -then - rm -f $tmpfile -fi - -# Send the escape sequence to target board using default debug port speed -stty -F $port raw ignbrk time 5 $default_baudrate -counter=0 -while [ $counter -lt $pattern_repeat ]; do - echo -n -e "$prefix\x11\x22\x33\x44\x55\x66\x77" >> $tmpfile - let counter=counter+1 -done - -echo -en "Press the \"Reset\" button on the target board and " -echo -en "the \"Enter\" key on the host keyboard simultaneously" -read -dd if=$tmpfile of=$port &>/dev/null - -# Speed up the binary image transfer -stty -F $port raw ignbrk time 5 $fast_baudrate -sx -vv $file > $port < $port -#sx-at91 $port $file - -# Return the port to the default speed -stty -F $port raw ignbrk time 5 $default_baudrate - -# Optional - fire up Minicom -minicom -D $port -b $default_baudrate - -- 2.20.1

7 17

[PATCH] imx8ulp: clock: Fix lcd clock algo
by Loic Poulain 21 Apr '22

21 Apr '22

The div loop uses reassign and reuse parent_rate, which causes the parent rate reference to be wrong after the first loop, the resulting clock becomes incorrect for div != 1. Fixes: 829e06bf4175 ("imx8ulp: clock: Add MIPI DSI clock and DCNano clock") Signed-off-by: Loic Poulain <loic.poulain(a)linaro.org> --- arch/arm/mach-imx/imx8ulp/clock.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-imx/imx8ulp/clock.c b/arch/arm/mach-imx/imx8ulp/clock.c index 91580b2..dbe0f78 100644 --- a/arch/arm/mach-imx/imx8ulp/clock.c +++ b/arch/arm/mach-imx/imx8ulp/clock.c @@ -381,10 +381,9 @@ void mxs_set_lcdclk(u32 base_addr, u32 freq_in_khz) debug("PLL4 rate %ukhz\n", pll4_rate); for (pfd = 12; pfd <= 35; pfd++) { - parent_rate = pll4_rate; - parent_rate = parent_rate * 18 / pfd; - for (div = 1; div <= 64; div++) { + parent_rate = pll4_rate; + parent_rate = parent_rate * 18 / pfd; parent_rate = parent_rate / div; for (pcd = 0; pcd < 8; pcd++) { -- 2.7.4

3 2

[RFC PATCH v3 00/23] Modernize U-Boot shell
by Francis Laniel 21 Apr '22

21 Apr '22

Hi. First I hope you are fine and the same for your relatives. I would also like to apologize for the delay between v2 and v3. During 2021 summer, Sean Anderson wrote a contribution to add a new shell, based on LIL, to U-Boot [1][2]. While one of the goals of this contribution was to address the fact actual U-Boot shell, which is based on Busybox hush, is old there was a discussion about adding a new shell versus updating the actual one [3][4]. So, in this series, with Harald Seiler, we updated the actual U-Boot shell to reflect what is currently in Busybox source code. Basically, this contribution is about taking a snapshot of Busybox shell/hush.c file (as it exists in commit 37460f5da) and adapt it to suit U-Boot needs. This contribution was written to be as backward-compatible as possible to avoid breaking the existing. So, the 2021 hush flavor offers the same as the actual, that is to say: 1. Variable expansion. 2. Instruction lists (;, && and ||). 3. If, then and else. 4. Loops (for, while and until). No new features offered by Busybox hush were implemented (e.g. functions). It is possible to change the parser at runtime using the "parser" command: => parser print old => parser set 2021 2021> parser print 2021 2021> parser set old => The default parser is the old one. In terms of testing, new unit tests were added to ut to ensure the new behavior is the same as the old one and it does not add regression. Nonetheless, if old behavior was buggy and fixed upstream, the fix is then added to U-Boot [5]. In sandbox, all of these tests pass smoothly: => printenv board board=sandbox => ut hush Running 20 hush tests ... Failures: 0 => parser set 2021 2021> ut hush Running 20 hush tests ... Failures: 0 Thanks to the effort of Harald Seiler, I was successful booting a board: 2021> printenv board_rev board_rev=iMX8MP 2021> boot ... root@iMX8MPboard:~# fw_printenv board_rev board_rev=iMX8MP I also tested another board where both parser were successful to boot it: => printenv fdtfile fdtfile=amlogic/meson-gxl-s905x-libretech-cc.dtb => boot ... root@lepotato:~# root@lepotato:~# reboot ... => parser set 2021 2021> printenv fdtfile fdtfile=amlogic/meson-gxl-s905x-libretech-cc.dtb 2021> boot ... root@lepotato:~# I marked this contribution as RFC to indeed collect your opinion. My goal is not to change suddenly actual shell to this one, we clearly need a transition period to think about it. I think it is better to see this contribution as a proof of concept which shows it is possible to update the actual shell. If you want to review it - your review will really be appreciated - here are some information regarding the commits: * commits marked as "test:" deal with unit tests. * commit "cli: Add Busybox upstream hush.c file." copies Busybox shell/hush.c into U-Boot tree, this explain why this commit contains around 12000 additions. * commit "cli: Port Busybox 2021 hush to U-Boot." modifies previously added file to permit us to use this as new shell. The really good idea of #include'ing Busybox code into a wrapper file to define some particular functions while minimizing modifications to upstream code comes from Harald Seiler. * commit "cmd: Add new parser command" adds a new command which permits selecting parser at runtime. I am not really satisfied with the fact it calls cli_init() and cli_loop() each time the parser is set, so your reviews would be welcomed. * Other commits focus on enabling features we need (e.g. if). Changes since v2: * Added a small fix to compile sandbox with NO_SDL=1. * Added a command to change parser at runtime. * Added 2021 parser function to all run_command*(). * Adapted Francis Laniel (23): video: sandbox: Add dummy function for sandbox_sdl_remove_display(). test: Add framework to test hush behavior test: hush: Test hush if/else test/py: hush_if_test: Remove the test file test: hush: Test hush variable expansion test: hush: Test hush commands list test: hush: Test hush loops cli: Add Busybox upstream hush.c file cli: Port Busybox 2021 hush to U-Boot cli: Add menu for hush parser global_data.h: add GD_FLG_HUSH_OLD_PARSER flag. cmd: Add new parser command. cli: Enables using hush 2021 parser as command line parser cli: hush_2021: Enable variables expansion for hush 2021 cli: hush_2021: Add functions to be called from run_command() cli: add hush 2021 as parser for run_command*(). test: hush: Fix instructions list tests for hush 2021 test: hush: Fix variable expansion tests for hush 2021 cli: hush_2021: Enable using \< and \> as string compare operators cli: hush_2021: Enable if keyword test: hush: Fix if tests for hush 2021 cli: hush_2021: Enable loops test: hush: Fix loop tests for hush 2021 arch/sandbox/include/asm/sdl.h | 5 + cmd/Kconfig | 21 + cmd/Makefile | 2 + cmd/parser.c | 125 + common/Makefile | 3 +- common/cli.c | 81 +- common/cli_hush_2021.c | 309 + common/cli_hush_upstream.c | 12795 +++++++++++++++++++++++++++ include/asm-generic/global_data.h | 8 + include/cli_hush.h | 49 +- include/test/hush.h | 15 + include/test/suites.h | 1 + test/Makefile | 3 + test/cmd_ut.c | 6 + test/hush/Makefile | 10 + test/hush/cmd_ut_hush.c | 20 + test/hush/dollar.c | 234 + test/hush/if.c | 353 + test/hush/list.c | 140 + test/hush/loop.c | 90 + test/py/tests/test_hush_if_test.py | 184 - 21 files changed, 14257 insertions(+), 197 deletions(-) create mode 100644 cmd/parser.c create mode 100644 common/cli_hush_2021.c create mode 100644 common/cli_hush_upstream.c create mode 100644 include/test/hush.h create mode 100644 test/hush/Makefile create mode 100644 test/hush/cmd_ut_hush.c create mode 100644 test/hush/dollar.c create mode 100644 test/hush/if.c create mode 100644 test/hush/list.c create mode 100644 test/hush/loop.c delete mode 100644 test/py/tests/test_hush_if_test.py -- 2.25.1

2 24

[PATCH v3] arm: kirkwood: nas220: Add DM Ethernet, SATA, GPIO
by Hajo Noerenberg 21 Apr '22

21 Apr '22

Bring the NAS220 board up to current standards. This is basically an adaptation of the changes Tony Dinh implemented for the Dockstar board. - Implement the changes to v2 as suggested by Stefan Roese - Add CONFIG_SUPPORT_PASSING_ATAGS et al, otherwise standard Debian flash-kernel pkg is unable to start kernel - Add CONFIG_SYS_64BIT_LBA, basic read tests with a 4TB hdd succeed with my NAS220 hardware - Thanks to Stefan and Tony Signed-off-by: Hajo Noerenberg <hajo-uboot(a)noerenberg.de> --- board/Seagate/nas220/MAINTAINERS | 1 + board/Seagate/nas220/nas220.c | 68 +++++++++++--------------------- configs/nas220_defconfig | 16 +++++++- include/configs/nas220.h | 35 ++++++---------- 4 files changed, 49 insertions(+), 71 deletions(-) diff --git a/board/Seagate/nas220/MAINTAINERS b/board/Seagate/nas220/MAINTAINERS index f2df7ea64f..6033f93cf4 100644 --- a/board/Seagate/nas220/MAINTAINERS +++ b/board/Seagate/nas220/MAINTAINERS @@ -4,3 +4,4 @@ S: Maintained F: board/Seagate/nas220/ F: include/configs/nas220.h F: configs/nas220_defconfig +F: arch/arm/dts/kirkwood-blackarmor-nas220.dts diff --git a/board/Seagate/nas220/nas220.c b/board/Seagate/nas220/nas220.c index cd2bbdad1c..fdbf321ff9 100644 --- a/board/Seagate/nas220/nas220.c +++ b/board/Seagate/nas220/nas220.c @@ -10,17 +10,22 @@ #include <common.h> #include <init.h> -#include <miiphy.h> -#include <net.h> -#include <asm/global_data.h> -#include <asm/mach-types.h> +#include <netdev.h> +#include <asm/arch/cpu.h> #include <asm/arch/soc.h> #include <asm/arch/mpp.h> -#include <asm/arch/cpu.h> -#include <asm/io.h> +#include <asm/global_data.h> +#include <asm/mach-types.h> +#include <linux/bitops.h> DECLARE_GLOBAL_DATA_PTR; +/* blue power led, board power, sata0, sata1 */ +#define NAS220_GE_OE_LOW (~(BIT(12) | BIT(14) | BIT(24) | BIT(28))) +#define NAS220_GE_OE_HIGH (~(0)) +#define NAS220_GE_OE_VAL_LOW (BIT(12) | BIT(14) | BIT(24) | BIT(28)) +#define NAS220_GE_OE_VAL_HIGH (0) + int board_early_init_f(void) { /* @@ -43,9 +48,9 @@ int board_early_init_f(void) MPP9_TW_SCK, MPP10_UART0_TXD, MPP11_UART0_RXD, - MPP12_GPO, + MPP12_GPO, /* blue power led */ MPP13_GPIO, - MPP14_GPIO, + MPP14_GPIO, /* board power */ MPP15_SATA0_ACTn, MPP16_SATA1_ACTn, MPP17_SATA0_PRESENTn, @@ -55,12 +60,12 @@ int board_early_init_f(void) MPP21_GPIO, MPP22_GPIO, MPP23_GPIO, - MPP24_GPIO, + MPP24_GPIO, /* sata0 power */ MPP25_GPIO, - MPP26_GPIO, + MPP26_GPIO, /* power button */ MPP27_GPIO, - MPP28_GPIO, - MPP29_GPIO, + MPP28_GPIO, /* sata1 power */ + MPP29_GPIO, /* reset button */ MPP30_GPIO, MPP31_GPIO, MPP32_GPIO, @@ -73,6 +78,11 @@ int board_early_init_f(void) return 0; } +int board_eth_init(struct bd_info *bis) +{ + return cpu_eth_init(bis); +} + int board_init(void) { /* @@ -85,37 +95,3 @@ int board_init(void) return 0; } - -#ifdef CONFIG_RESET_PHY_R -/* Configure and enable MV88E1116 PHY */ -void reset_phy(void) -{ - u16 reg; - u16 devadr; - char *name = "egiga0"; - - if (miiphy_set_current_dev(name)) - return; - - /* command to read PHY dev address */ - if (miiphy_read(name, 0xEE, 0xEE, (u16 *)&devadr)) { - printf("Err..%s could not read PHY dev address\n", __func__); - return; - } - - /* - * Enable RGMII delay on Tx and Rx for CPU port - * Ref: sec 4.7.2 of chip datasheet - */ - miiphy_write(name, devadr, MV88E1116_PGADR_REG, 2); - miiphy_read(name, devadr, MV88E1116_MAC_CTRL_REG, &reg); - reg |= (MV88E1116_RGMII_RXTM_CTRL | MV88E1116_RGMII_TXTM_CTRL); - miiphy_write(name, devadr, MV88E1116_MAC_CTRL_REG, reg); - miiphy_write(name, devadr, MV88E1116_PGADR_REG, 0); - - /* reset the phy */ - miiphy_reset(name, devadr); - - printf("88E1116 Initialized on %s\n", name); -} -#endif /* CONFIG_RESET_PHY_R */ diff --git a/configs/nas220_defconfig b/configs/nas220_defconfig index f6a1dcbee0..5bf1233273 100644 --- a/configs/nas220_defconfig +++ b/configs/nas220_defconfig @@ -3,6 +3,9 @@ CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_SYS_DCACHE_OFF=y CONFIG_ARCH_CPU_INIT=y CONFIG_ARCH_KIRKWOOD=y +CONFIG_SUPPORT_PASSING_ATAGS=y +CONFIG_CMDLINE_TAG=y +CONFIG_INITRD_TAG=y CONFIG_SYS_KWD_CONFIG="board/Seagate/nas220/kwbimage.cfg" CONFIG_SYS_TEXT_BASE=0x600000 CONFIG_NR_DRAM_BANKS=2 @@ -20,7 +23,7 @@ CONFIG_USE_PREBOOT=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="nas220> " # CONFIG_CMD_FLASH is not set -CONFIG_CMD_IDE=y +CONFIG_CMD_SATA=y CONFIG_CMD_NAND=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set @@ -32,6 +35,7 @@ CONFIG_CMD_EXT4=y CONFIG_CMD_FAT=y CONFIG_CMD_JFFS2=y CONFIG_CMD_MTDPARTS=y +CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:0xa0000@0x0(uboot),0x010000@0xa0000(env),0x500000@0xc0000(uimage),0x1a40000@0x5c0000(rootfs)" CONFIG_CMD_UBI=y CONFIG_ISO_PARTITION=y CONFIG_EFI_PARTITION=y @@ -47,11 +51,21 @@ CONFIG_SYS_ATA_DATA_OFFSET=0x100 CONFIG_SYS_ATA_REG_OFFSET=0x100 CONFIG_SYS_ATA_ALT_OFFSET=0x100 CONFIG_KIRKWOOD_GPIO=y +CONFIG_MVEBU_GPIO=y +CONFIG_GPIO_EXTRA_HEADER=y +CONFIG_DM_GPIO=y +CONFIG_CMD_GPIO=y +CONFIG_GPIO=y +CONFIG_DM_GPIO_LOOKUP_LABEL=y # CONFIG_MMC is not set CONFIG_MTD=y CONFIG_MTD_RAW_NAND=y +CONFIG_PHY_MARVELL=y +CONFIG_DM_ETH=y CONFIG_MVGBE=y CONFIG_MII=y +CONFIG_SATA_MV=y +CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_DM_RTC=y CONFIG_RTC_MV=y CONFIG_SYS_NS16550=y diff --git a/include/configs/nas220.h b/include/configs/nas220.h index 815f81f649..4c20245e5f 100644 --- a/include/configs/nas220.h +++ b/include/configs/nas220.h @@ -11,50 +11,37 @@ #ifndef _CONFIG_NAS220_H #define _CONFIG_NAS220_H -/* power-on led, regulator, sata0, sata1 */ -#define NAS220_GE_OE_VAL_LOW ((1 << 12)|(1 << 14)|(1 << 24)|(1 << 28)) -#define NAS220_GE_OE_VAL_HIGH (0) -#define NAS220_GE_OE_LOW (~((1 << 12)|(1 << 14)|(1 << 24)|(1 << 28))) -#define NAS220_GE_OE_HIGH (~(0)) - -/* PHY related */ -#define MV88E1116_LED_FCTRL_REG 10 -#define MV88E1116_CPRSP_CR3_REG 21 -#define MV88E1116_MAC_CTRL_REG 21 -#define MV88E1116_PGADR_REG 22 -#define MV88E1116_RGMII_TXTM_CTRL (1 << 4) -#define MV88E1116_RGMII_RXTM_CTRL (1 << 5) - -#include "mv-common.h" - /* - * Environment variables configurations + * mv-common.h should be defined after CMD configs since it used them + * to enable certain macros */ +#include "mv-common.h" + /* * Default environment variables */ #define CONFIG_EXTRA_ENV_SETTINGS \ "bootargs=console=ttyS0,115200\0" \ - "mtdparts=mtdparts=orion_nand:0xa0000@0x0(uboot),"\ - "0x010000@0xa0000(env),"\ - "0x500000@0xc0000(uimage),"\ - "0x1a40000@0x5c0000(rootfs)\0" \ "mtdids=nand0=orion_nand\0"\ + "mtdparts=" CONFIG_MTDPARTS_DEFAULT \ "autostart=no\0"\ "autoload=no\0" /* * Ethernet Driver configuration */ -#ifdef CONFIG_CMD_NET #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ #define CONFIG_PHY_BASE_ADR 8 -#endif /* CONFIG_CMD_NET */ +#ifdef CONFIG_RESET_PHY_R +#undef CONFIG_RESET_PHY_R /* remove legacy reset_phy() */ +#endif /* - * EFI partition + * SATA driver configuration */ +#define CONFIG_LBA48 +#define CONFIG_SYS_64BIT_LBA #endif /* _CONFIG_NAS220_H */ -- 2.20.1

3 7

[PATCH] cmd: gpio: Add `gpio read` subcommand
by Diego Rondini 20 Apr '22

20 Apr '22

As explained in commit 4af2a33ee5b9 ("cmd: gpio: Make `gpio input` return pin value again") the `gpio input` is used in scripts to obtain the value of a pin, despite the fact that CMD_RET_FAILURE is indistinguishable from a valid pin value. To be able to detect failures and properly use the value of a GPIO in scripts we introduce the `gpio read` command that sets the variable `name` to the value of the pin. Return code of the `gpio read` command can be used to check for CMD_RET_SUCCESS or CMD_RET_FAILURE. Signed-off-by: Diego Rondini <diego.rondini(a)kynetics.com> --- cmd/gpio.c | 24 ++++++++++++++++++++---- test/py/tests/test_gpio.py | 15 +++++++++++++++ 2 files changed, 35 insertions(+), 4 deletions(-) diff --git a/cmd/gpio.c b/cmd/gpio.c index 4150024e628..150c77cbcf9 100644 --- a/cmd/gpio.c +++ b/cmd/gpio.c @@ -12,6 +12,7 @@ #include <dm.h> #include <log.h> #include <malloc.h> +#include <env.h> #include <asm/gpio.h> #include <linux/err.h> @@ -25,6 +26,7 @@ enum gpio_cmd { GPIOC_SET, GPIOC_CLEAR, GPIOC_TOGGLE, + GPIOC_READ, }; #if defined(CONFIG_DM_GPIO) && !defined(gpio_status) @@ -124,7 +126,7 @@ static int do_gpio(struct cmd_tbl *cmdtp, int flag, int argc, unsigned int gpio; enum gpio_cmd sub_cmd; int value; - const char *str_cmd, *str_gpio = NULL; + const char *str_cmd, *str_gpio, *str_var = NULL; int ret; #ifdef CONFIG_DM_GPIO bool all = false; @@ -137,12 +139,19 @@ static int do_gpio(struct cmd_tbl *cmdtp, int flag, int argc, argc -= 2; argv += 2; #ifdef CONFIG_DM_GPIO - if (argc > 0 && !strcmp(*argv, "-a")) { + if (argc > 0 && !strncmp(str_cmd, "status", 2) && !strcmp(*argv, "-a")) { all = true; argc--; argv++; } #endif + if (argc > 0 && !strncmp(str_cmd, "read", 2)) { + if (argc < 2) + goto show_usage; + str_var = *argv; + argc--; + argv++; + } if (argc > 0) str_gpio = *argv; if (!strncmp(str_cmd, "status", 2)) { @@ -174,6 +183,9 @@ static int do_gpio(struct cmd_tbl *cmdtp, int flag, int argc, case 't': sub_cmd = GPIOC_TOGGLE; break; + case 'r': + sub_cmd = GPIOC_READ; + break; default: goto show_usage; } @@ -205,7 +217,7 @@ static int do_gpio(struct cmd_tbl *cmdtp, int flag, int argc, } /* finally, let's do it: set direction and exec command */ - if (sub_cmd == GPIOC_INPUT) { + if (sub_cmd == GPIOC_INPUT || sub_cmd == GPIOC_READ) { gpio_direction_input(gpio); value = gpio_get_value(gpio); } else { @@ -233,9 +245,11 @@ static int do_gpio(struct cmd_tbl *cmdtp, int flag, int argc, goto err; } else { printf("%d\n", value); + if (sub_cmd == GPIOC_READ) + env_set_ulong(str_var, (ulong)value); } - if (sub_cmd != GPIOC_INPUT && !IS_ERR_VALUE(value)) { + if (sub_cmd != GPIOC_INPUT && sub_cmd != GPIOC_READ && !IS_ERR_VALUE(value)) { int nval = gpio_get_value(gpio); if (IS_ERR_VALUE(nval)) { @@ -267,4 +281,6 @@ U_BOOT_CMD(gpio, 4, 0, do_gpio, "query and control gpio pins", "<input|set|clear|toggle> <pin>\n" " - input/set/clear/toggle the specified pin\n" + "gpio read <name> <pin>\n" + " - set environment variable 'name' to the specified pin\n" "gpio status [-a] [<bank> | <pin>] - show [all/claimed] GPIOs"); diff --git a/test/py/tests/test_gpio.py b/test/py/tests/test_gpio.py index 8c64f686b0b..52bc8502d3e 100644 --- a/test/py/tests/test_gpio.py +++ b/test/py/tests/test_gpio.py @@ -35,3 +35,18 @@ def test_gpio_exit_statuses(u_boot_console): assert(expected_response in response) response = u_boot_console.run_command('gpio input 200; echo rc:$?') assert(expected_response in response) + +(a)pytest.mark.boardspec('sandbox') +(a)pytest.mark.buildconfigspec('cmd_gpio') +def test_gpio_read(u_boot_console): + """Test that gpio read correctly sets the variable to the value of a gpio pin.""" + + response = u_boot_console.run_command('gpio read var 0; echo val:$var') + expected_response = 'val:0' + assert(expected_response in response) + response = u_boot_console.run_command('gpio toggle 0; gpio read var 0; echo val:$var') + expected_response = 'val:1' + assert(expected_response in response) + response = u_boot_console.run_command('setenv var; gpio read var nonexistent-gpio; echo val:$var') + expected_response = 'val:' + assert(expected_response in response) -- 2.34.1

2 3

[PATCH 1/2] ram: k3-ddrss: Fix register name and explain its usage
by Dominic Rath 20 Apr '22

20 Apr '22

The k3-ddrss driver wants to configure the DDRSS_V2A_CTL_REG to reflect the maximum possible SDRAM of 2 GB for AM64x (instead of the register's default that says 8 GB, which the AM64x DDR controller wouldn't support). The offset 0x20 was correct, but the register name DDRSS_V2A_R1_MAT_REG was that of the next register at offset 0x24. Signed-off-by: Dominic Rath <rath(a)ibv-augsburg.net> --- drivers/ram/k3-ddrss/k3-ddrss.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/ram/k3-ddrss/k3-ddrss.c b/drivers/ram/k3-ddrss/k3-ddrss.c index 25e3976e65..261ba64506 100644 --- a/drivers/ram/k3-ddrss/k3-ddrss.c +++ b/drivers/ram/k3-ddrss/k3-ddrss.c @@ -27,7 +27,7 @@ #define CTRLMMR_DDR4_FSP_CLKCHNG_REQ_OFFS 0x80 #define CTRLMMR_DDR4_FSP_CLKCHNG_ACK_OFFS 0xc0 -#define DDRSS_V2A_R1_MAT_REG 0x0020 +#define DDRSS_V2A_CTL_REG 0x0020 #define DDRSS_ECC_CTRL_REG 0x0120 #define SINGLE_DDR_SUBSYSTEM 0x1 @@ -529,8 +529,8 @@ static int k3_ddrss_probe(struct udevice *dev) return ret; #ifdef CONFIG_K3_AM64_DDRSS - - writel(0x000001EF, ddrss->ddrss_ss_cfg + DDRSS_V2A_R1_MAT_REG); + /* AM64x supports only up to 2 GB SDRAM */ + writel(0x000001EF, ddrss->ddrss_ss_cfg + DDRSS_V2A_CTL_REG); writel(0x0, ddrss->ddrss_ss_cfg + DDRSS_ECC_CTRL_REG); #endif -- 2.35.1

3 4

[PATCH] spl: spl_sdp: don't call board_usb_init twice
by Angus Ainslie 20 Apr '22

20 Apr '22

When CONFIG_DM_USB is not defined then usb_gadget_initialize is just a call to board_usb_init. Calling board_usb_init twice causes the USB to fail so make sure the second invocation is not compiled in when CONFIG_DM_USB is not defined. Signed-off-by: Angus Ainslie <angus(a)akkea.ca> --- common/spl/spl_sdp.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/common/spl/spl_sdp.c b/common/spl/spl_sdp.c index ae9c09883a..2a2bc8475d 100644 --- a/common/spl/spl_sdp.c +++ b/common/spl/spl_sdp.c @@ -17,7 +17,8 @@ static int spl_sdp_load_image(struct spl_image_info *spl_image, int ret; const int controller_index = CONFIG_SPL_SDP_USB_DEV; - usb_gadget_initialize(controller_index); + if (IS_ENABLED(CONFIG_DM_USB)) + usb_gadget_initialize(controller_index); board_usb_init(0, USB_INIT_DEVICE); -- 2.25.1

1 1

[PATCH v3] drivers: spi-nor: Add JEDEC id for W25Q16JV
by Angus Ainslie 20 Apr '22

20 Apr '22

Add a JEDEC id for the Winbond W25Q16JV 16M-BIT serial flash memory with DUAL/QUAD SPI Changes since v2: Chagned the name to follow "DTR" parts Changes since v1: Updated the name for more suffixes Signed-off-by: Angus Ainslie <angus(a)akkea.ca> --- drivers/mtd/spi/spi-nor-ids.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/mtd/spi/spi-nor-ids.c b/drivers/mtd/spi/spi-nor-ids.c index b551ebd75e..08e386fbf5 100644 --- a/drivers/mtd/spi/spi-nor-ids.c +++ b/drivers/mtd/spi/spi-nor-ids.c @@ -314,6 +314,11 @@ const struct flash_info spi_nor_ids[] = { SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) }, + { + INFO("w25q16jvm", 0xef7015, 0, 64 * 1024, 32, + SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | + SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) + }, { INFO("w25q32jv", 0xef7016, 0, 64 * 1024, 64, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | -- 2.25.1

5 11

[PATCH v2] board: purism: add the Purism Librem5 phone
by Angus Ainslie 20 Apr '22

20 Apr '22

Initial commit of Librem5 phone u-boot and SPL Using this u-boot the phone can boot from eMMC or USB via SDP. USB host is also active so the kernel can be loaded from USB storage or one of the boot methods above. Signed-off-by: Angus Ainslie <angus(a)akkea.ca> Co-developed-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak(a)puri.sm> Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak(a)puri.sm> --- All of the pre-requisite patches for this board are now upstream or in review. Changes since v1: Merged patches into a monolithic board patch Using DM drivers for devices in u-boot Added USB storage support for uSD rootfs Dropped many SPL_BUILD guarded define's Fixed documentation index arch/arm/dts/Makefile | 3 +- arch/arm/dts/imx8mq-librem5-r4-u-boot.dtsi | 134 ++ arch/arm/dts/imx8mq-librem5-r4.dts | 35 + arch/arm/dts/imx8mq-librem5.dtsi | 1255 +++++++++++++++++ arch/arm/mach-imx/imx8m/Kconfig | 9 + board/purism/librem5/Kconfig | 15 + board/purism/librem5/MAINTAINERS | 8 + board/purism/librem5/Makefile | 13 + board/purism/librem5/imximage-8mq-lpddr4.cfg | 8 + board/purism/librem5/librem5.c | 483 +++++++ board/purism/librem5/librem5.h | 182 +++ board/purism/librem5/lpddr4_timing.c | 1324 ++++++++++++++++++ board/purism/librem5/lpddr4_timing_b0.c | 1191 ++++++++++++++++ board/purism/librem5/spl.c | 597 ++++++++ configs/librem5_defconfig | 139 ++ doc/board/index.rst | 1 + doc/board/purism/index.rst | 9 + doc/board/purism/librem5.rst | 60 + include/configs/librem5.h | 151 ++ 19 files changed, 5616 insertions(+), 1 deletion(-) create mode 100644 arch/arm/dts/imx8mq-librem5-r4-u-boot.dtsi create mode 100644 arch/arm/dts/imx8mq-librem5-r4.dts create mode 100644 arch/arm/dts/imx8mq-librem5.dtsi create mode 100644 board/purism/librem5/Kconfig create mode 100644 board/purism/librem5/MAINTAINERS create mode 100644 board/purism/librem5/Makefile create mode 100644 board/purism/librem5/imximage-8mq-lpddr4.cfg create mode 100644 board/purism/librem5/librem5.c create mode 100644 board/purism/librem5/librem5.h create mode 100644 board/purism/librem5/lpddr4_timing.c create mode 100644 board/purism/librem5/lpddr4_timing_b0.c create mode 100644 board/purism/librem5/spl.c create mode 100644 configs/librem5_defconfig create mode 100644 doc/board/purism/index.rst create mode 100644 doc/board/purism/librem5.rst create mode 100644 include/configs/librem5.h diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 960f1a9fd4d..c8d5b541109 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -926,7 +926,8 @@ dtb-$(CONFIG_ARCH_IMX8M) += \ imx8mp-phyboard-pollux-rdk.dtb \ imx8mp-verdin.dtb \ imx8mq-pico-pi.dtb \ - imx8mq-kontron-pitx-imx8m.dtb + imx8mq-kontron-pitx-imx8m.dtb \ + imx8mq-librem5-r4.dtb dtb-$(CONFIG_ARCH_IMXRT) += imxrt1050-evk.dtb \ imxrt1020-evk.dtb diff --git a/arch/arm/dts/imx8mq-librem5-r4-u-boot.dtsi b/arch/arm/dts/imx8mq-librem5-r4-u-boot.dtsi new file mode 100644 index 00000000000..e3f780ca75b --- /dev/null +++ b/arch/arm/dts/imx8mq-librem5-r4-u-boot.dtsi @@ -0,0 +1,134 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +/ { + binman: binman { + multiple-images; + }; +}; + +&binman { + u-boot-spl-ddr { + filename = "u-boot-spl-ddr.bin"; + pad-byte = <0xff>; + align-size = <4>; + align = <4>; + + u-boot-spl { + align-end = <4>; + }; + + blob_1: blob-ext@1 { + filename = "lpddr4_pmu_train_1d_imem.bin"; + size = <0x8000>; + }; + + blob_2: blob-ext@2 { + filename = "lpddr4_pmu_train_1d_dmem.bin"; + size = <0x4000>; + }; + + blob_3: blob-ext@3 { + filename = "lpddr4_pmu_train_2d_imem.bin"; + size = <0x8000>; + }; + + blob_4: blob-ext@4 { + filename = "lpddr4_pmu_train_2d_dmem.bin"; + size = <0x4000>; + }; + }; + + spl { + filename = "spl.bin"; + + mkimage { + args = "-n spl/u-boot-spl.cfgout -T imx8mimage -e 0x7e1000"; + + blob { + filename = "u-boot-spl-ddr.bin"; + }; + }; + }; + + itb { + filename = "u-boot.itb"; + + fit { + description = "Configuration to load ATF before U-Boot"; + #address-cells = <1>; + fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>; + + images { + uboot { + description = "U-Boot (64-bit)"; + type = "standalone"; + arch = "arm64"; + compression = "none"; + load = <CONFIG_SYS_TEXT_BASE>; + + uboot_blob: blob-ext { + filename = "u-boot-nodtb.bin"; + }; + }; + + atf { + description = "ARM Trusted Firmware"; + type = "firmware"; + arch = "arm64"; + compression = "none"; + load = <0x910000>; + entry = <0x910000>; + + atf_blob: blob-ext { + filename = "bl31.bin"; + }; + }; + + fdt { + description = "NAME"; + type = "flat_dt"; + compression = "none"; + + uboot_fdt_blob: blob-ext { + filename = "u-boot.dtb"; + }; + }; + }; + + configurations { + default = "conf"; + + conf { + description = "NAME"; + firmware = "uboot"; + loadables = "atf"; + fdt = "fdt"; + }; + }; + }; + }; + + imx-boot { + filename = "flash.bin"; + pad-byte = <0x00>; + + spl: blob-ext@1 { + offset = <0x0>; + filename = "spl.bin"; + }; + + uboot: blob-ext@2 { + offset = <0x57c00>; + filename = "u-boot.itb"; + }; + }; +}; + +&usdhc1 { + mmc-hs400-1_8v; +}; + +&usdhc2 { + sd-uhs-sdr104; + sd-uhs-ddr50; +}; diff --git a/arch/arm/dts/imx8mq-librem5-r4.dts b/arch/arm/dts/imx8mq-librem5-r4.dts new file mode 100644 index 00000000000..cbfb49aa256 --- /dev/null +++ b/arch/arm/dts/imx8mq-librem5-r4.dts @@ -0,0 +1,35 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2020 Purism SPC <kernel(a)puri.sm> + +/dts-v1/; + +#include "imx8mq-librem5.dtsi" + +/ { + model = "Purism Librem 5r4"; + compatible = "purism,librem5r4", "purism,librem5", "fsl,imx8mq"; +}; + +&accel_gyro { + mount-matrix = "1", "0", "0", + "0", "1", "0", + "0", "0", "-1"; +}; + +&bat { + maxim,rsns-microohm = <1667>; +}; + +&bq25895 { + ti,battery-regulation-voltage = <4200000>; /* uV */ + ti,charge-current = <1500000>; /* uA */ + ti,termination-current = <144000>; /* uA */ +}; + +&led_backlight { + led-max-microamp = <25000>; +}; + +&proximity { + proximity-near-level = <10>; +}; diff --git a/arch/arm/dts/imx8mq-librem5.dtsi b/arch/arm/dts/imx8mq-librem5.dtsi new file mode 100644 index 00000000000..60d47c71499 --- /dev/null +++ b/arch/arm/dts/imx8mq-librem5.dtsi @@ -0,0 +1,1255 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018-2020 Purism SPC + */ + +/dts-v1/; + +#include "dt-bindings/input/input.h" +#include <dt-bindings/interrupt-controller/irq.h> +#include "dt-bindings/pwm/pwm.h" +#include "dt-bindings/usb/pd.h" +#include "imx8mq.dtsi" + +/ { + model = "Purism Librem 5"; + compatible = "purism,librem5", "fsl,imx8mq"; + + backlight_dsi: backlight-dsi { + compatible = "led-backlight"; + leds = <&led_backlight>; + }; + + pmic_osc: clock-pmic { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "pmic_osc"; + }; + + chosen { + stdout-path = &uart1; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_keys>; + + vol-down { + label = "VOL_DOWN"; + gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + debounce-interval = <50>; + }; + + vol-up { + label = "VOL_UP"; + gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + debounce-interval = <50>; + }; + }; + + reg_aud_1v8: regulator-audio-1v8 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audiopwr>; + regulator-name = "AUDIO_PWR_EN"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_gnss: regulator-gnss { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gnsspwr>; + regulator-name = "GNSS"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 12 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_hub: regulator-hub { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hub_pwr>; + regulator-name = "HUB"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_lcd_1v8: regulator-lcd-1v8 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dsien>; + regulator-name = "LCD_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&reg_vdd_1v8>; + gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + /* Otherwise i2c3 is not functional */ + regulator-always-on; + }; + + reg_lcd_3v4: regulator-lcd-3v4 { + compatible = "regulator-fixed"; + regulator-name = "LCD_3V4"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dsibiasen>; + vin-supply = <&reg_vsys_3v4>; + gpio = <&gpio1 20 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_vdd_sen: regulator-vdd-sen { + compatible = "regulator-fixed"; + regulator-name = "VDD_SEN"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_vdd_1v8: regulator-vdd-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDD_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&buck7_reg>; + }; + + reg_vdd_3v3: regulator-vdd-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_vsys_3v4: regulator-vsys-3v4 { + compatible = "regulator-fixed"; + regulator-name = "VSYS_3V4"; + regulator-min-microvolt = <3400000>; + regulator-max-microvolt = <3400000>; + regulator-always-on; + }; + + reg_wifi_3v3: regulator-wifi-3v3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wifi_pwr>; + regulator-name = "3V3_WIFI"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 10 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&reg_vdd_3v3>; + }; + + sound { + compatible = "simple-audio-card"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hp>; + simple-audio-card,name = "Librem 5"; + simple-audio-card,format = "i2s"; + simple-audio-card,widgets = + "Headphone", "Headphones", + "Microphone", "Headset Mic", + "Microphone", "Digital Mic", + "Speaker", "Speaker"; + simple-audio-card,routing = + "Headphones", "HPOUTL", + "Headphones", "HPOUTR", + "Speaker", "SPKOUTL", + "Speaker", "SPKOUTR", + "Headset Mic", "MICBIAS", + "IN3R", "Headset Mic", + "DMICDAT", "Digital Mic"; + simple-audio-card,hp-det-gpio = <&gpio3 9 GPIO_ACTIVE_HIGH>; + + simple-audio-card,cpu { + sound-dai = <&sai2>; + }; + + simple-audio-card,codec { + sound-dai = <&codec>; + clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>; + frame-master; + bitclock-master; + }; + }; + + sound-wwan { + compatible = "simple-audio-card"; + simple-audio-card,name = "Modem"; + simple-audio-card,format = "i2s"; + + simple-audio-card,cpu { + sound-dai = <&sai6>; + frame-inversion; + }; + + simple-audio-card,codec { + sound-dai = <&bm818_codec>; + frame-master; + bitclock-master; + }; + }; + + usdhc2_pwrseq: pwrseq { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_bt>, <&pinctrl_wifi_disable>; + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>, + <&gpio4 29 GPIO_ACTIVE_HIGH>; + }; + + bm818_codec: sound-wwan-codec { + compatible = "broadmobi,bm818", "option,gtm601"; + #sound-dai-cells = <0>; + }; + + vibrator { + compatible = "pwm-vibrator"; + pwms = <&pwm1 0 1000000000 0>; + pwm-names = "enable"; + vcc-supply = <&reg_vdd_3v3>; + }; +}; + +&A53_0 { + cpu-supply = <&buck2_reg>; +}; + +&A53_1 { + cpu-supply = <&buck2_reg>; +}; + +&A53_2 { + cpu-supply = <&buck2_reg>; +}; + +&A53_3 { + cpu-supply = <&buck2_reg>; +}; + +&ddrc { + operating-points-v2 = <&ddrc_opp_table>; + + ddrc_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-25M { + opp-hz = /bits/ 64 <25000000>; + }; + + opp-100M { + opp-hz = /bits/ 64 <100000000>; + }; + + opp-800M { + opp-hz = /bits/ 64 <800000000>; + }; + }; +}; + +&dphy { + status = "okay"; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + nor_flash: flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "protected0"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "protected1"; + reg = <0x30000 0x10000>; + read-only; + }; + + partition@40000 { + label = "rw"; + reg = <0x40000 0x1C0000>; + }; + }; +}; + +&gpio1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic_5v>; + + pmic-5v-hog { + gpio-hog; + gpios = <1 GPIO_ACTIVE_HIGH>; + input; + lane-mapping = "pmic-5v"; + }; +}; + +&iomuxc { + pinctrl_audiopwr: audiopwrgrp { + fsl,pins = < + /* AUDIO_POWER_EN_3V3 */ + MX8MQ_IOMUXC_GPIO1_IO04_GPIO1_IO4 0x83 + >; + }; + + pinctrl_bl: blgrp { + fsl,pins = < + /* BACKLINGE_EN */ + MX8MQ_IOMUXC_NAND_DQS_GPIO3_IO14 0x83 + >; + }; + + pinctrl_bt: btgrp { + fsl,pins = < + /* BT_REG_ON */ + MX8MQ_IOMUXC_SAI5_MCLK_GPIO3_IO25 0x83 + >; + }; + + pinctrl_charger_in: chargeringrp { + fsl,pins = < + /* CHRG_INT */ + MX8MQ_IOMUXC_NAND_CE2_B_GPIO3_IO3 0x80 + /* CHG_STATUS_B */ + MX8MQ_IOMUXC_NAND_ALE_GPIO3_IO0 0x80 + >; + }; + + pinctrl_dsibiasen: dsibiasengrp { + fsl,pins = < + /* DSI_BIAS_EN */ + MX8MQ_IOMUXC_ENET_TD1_GPIO1_IO20 0x83 + >; + }; + + pinctrl_dsien: dsiengrp { + fsl,pins = < + /* DSI_EN_3V3 */ + MX8MQ_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x83 + >; + }; + + pinctrl_dsirst: dsirstgrp { + fsl,pins = < + /* DSI_RST */ + MX8MQ_IOMUXC_ENET_RD3_GPIO1_IO29 0x83 + /* DSI_TE */ + MX8MQ_IOMUXC_ENET_RD2_GPIO1_IO28 0x83 + /* TP_RST */ + MX8MQ_IOMUXC_ENET_RX_CTL_GPIO1_IO24 0x83 + >; + }; + + pinctrl_ecspi1: ecspigrp { + fsl,pins = < + MX8MQ_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x83 + MX8MQ_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x83 + MX8MQ_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x19 + MX8MQ_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x83 + >; + }; + + pinctrl_gauge: gaugegrp { + fsl,pins = < + /* BAT_LOW */ + MX8MQ_IOMUXC_SAI5_RXC_GPIO3_IO20 0x80 + >; + }; + + pinctrl_gnsspwr: gnsspwrgrp { + fsl,pins = < + /* GPS3V3_EN */ + MX8MQ_IOMUXC_NAND_DATA06_GPIO3_IO12 0x83 + >; + }; + + pinctrl_haptic: hapticgrp { + fsl,pins = < + /* MOTO */ + MX8MQ_IOMUXC_SPDIF_EXT_CLK_PWM1_OUT 0x83 + >; + }; + + pinctrl_hp: hpgrp { + fsl,pins = < + /* HEADPHONE_DET_1V8 */ + MX8MQ_IOMUXC_NAND_DATA03_GPIO3_IO9 0x180 + >; + }; + + pinctrl_hub_pwr: hubpwrgrp { + fsl,pins = < + /* HUB_PWR_3V3_EN */ + MX8MQ_IOMUXC_GPIO1_IO14_GPIO1_IO14 0x83 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x40000026 + MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA 0x40000026 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL 0x40000026 + MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA 0x40000026 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL 0x40000026 + MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA 0x40000026 + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C4_SCL_I2C4_SCL 0x40000026 + MX8MQ_IOMUXC_I2C4_SDA_I2C4_SDA 0x40000026 + >; + }; + + pinctrl_keys: keysgrp { + fsl,pins = < + /* VOL- */ + MX8MQ_IOMUXC_ENET_MDIO_GPIO1_IO17 0x01C0 + /* VOL+ */ + MX8MQ_IOMUXC_ENET_MDC_GPIO1_IO16 0x01C0 + >; + }; + + pinctrl_led_b: ledbgrp { + fsl,pins = < + /* LED_B */ + MX8MQ_IOMUXC_GPIO1_IO13_PWM2_OUT 0x06 + >; + }; + + pinctrl_led_g: ledggrp { + fsl,pins = < + /* LED_G */ + MX8MQ_IOMUXC_SAI3_MCLK_PWM4_OUT 0x06 + >; + }; + + pinctrl_led_r: ledrgrp { + fsl,pins = < + /* LED_R */ + MX8MQ_IOMUXC_SPDIF_TX_PWM3_OUT 0x06 + >; + }; + + pinctrl_mag: maggrp { + fsl,pins = < + /* INT_MAG */ + MX8MQ_IOMUXC_SAI5_RXD1_GPIO3_IO22 0x80 + >; + }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + /* PMIC_NINT */ + MX8MQ_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x80 + >; + }; + + pinctrl_pmic_5v: pmic5vgrp { + fsl,pins = < + /* PMIC_5V */ + MX8MQ_IOMUXC_GPIO1_IO01_GPIO1_IO1 0x80 + >; + }; + + pinctrl_prox: proxgrp { + fsl,pins = < + /* INT_LIGHT */ + MX8MQ_IOMUXC_NAND_DATA01_GPIO3_IO7 0x80 + >; + }; + + pinctrl_rtc: rtcgrp { + fsl,pins = < + /* RTC_INT */ + MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x80 + >; + }; + + pinctrl_sai2: sai2grp { + fsl,pins = < + MX8MQ_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0 0xd6 + MX8MQ_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC 0xd6 + MX8MQ_IOMUXC_SAI2_MCLK_SAI2_MCLK 0xd6 + MX8MQ_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0 0xd6 + MX8MQ_IOMUXC_SAI2_TXC_SAI2_TX_BCLK 0xd6 + >; + }; + + pinctrl_sai6: sai6grp { + fsl,pins = < + MX8MQ_IOMUXC_SAI1_RXD5_SAI6_RX_DATA0 0xd6 + MX8MQ_IOMUXC_SAI1_RXD6_SAI6_RX_SYNC 0xd6 + MX8MQ_IOMUXC_SAI1_TXD4_SAI6_RX_BCLK 0xd6 + MX8MQ_IOMUXC_SAI1_TXD5_SAI6_TX_DATA0 0xd6 + >; + }; + + pinctrl_tcpc: tcpcgrp { + fsl,pins = < + /* TCPC_INT */ + MX8MQ_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x01C0 + >; + }; + + pinctrl_touch: touchgrp { + fsl,pins = < + /* TP_INT */ + MX8MQ_IOMUXC_ENET_RD1_GPIO1_IO27 0x80 + >; + }; + + pinctrl_typec: typecgrp { + fsl,pins = < + /* TYPEC_MUX_EN */ + MX8MQ_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x83 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX 0x49 + MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX 0x49 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX 0x49 + MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX 0x49 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX8MQ_IOMUXC_UART3_RXD_UART3_DCE_RX 0x49 + MX8MQ_IOMUXC_UART3_TXD_UART3_DCE_TX 0x49 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX8MQ_IOMUXC_ECSPI2_SCLK_UART4_DCE_RX 0x49 + MX8MQ_IOMUXC_ECSPI2_MOSI_UART4_DCE_TX 0x49 + MX8MQ_IOMUXC_ECSPI2_MISO_UART4_DCE_CTS_B 0x49 + MX8MQ_IOMUXC_ECSPI2_SS0_UART4_DCE_RTS_B 0x49 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x83 + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc3 + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc3 + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc3 + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc3 + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc3 + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc3 + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc3 + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc3 + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc3 + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x83 + MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1grp100mhz { + fsl,pins = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x8d + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xcd + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xcd + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xcd + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xcd + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xcd + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xcd + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xcd + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xcd + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xcd + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x8d + MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + fsl,pins = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x9f + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xdf + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xdf + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xdf + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xdf + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xdf + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xdf + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xdf + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xdf + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xdf + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x9f + MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12 0x80 + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x83 + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc3 + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc3 + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc3 + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc3 + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc3 + MX8MQ_IOMUXC_SD2_RESET_B_USDHC2_RESET_B 0xc1 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2grp100mhz { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12 0x80 + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x8d + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xcd + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xcd + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xcd + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xcd + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xcd + MX8MQ_IOMUXC_SD2_RESET_B_USDHC2_RESET_B 0xc1 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2grp200mhz { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12 0x80 + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x9f + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xcf + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xcf + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xcf + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xcf + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xcf + MX8MQ_IOMUXC_SD2_RESET_B_USDHC2_RESET_B 0xc1 + >; + }; + + pinctrl_wifi_disable: wifidisablegrp { + fsl,pins = < + /* WIFI_REG_ON */ + MX8MQ_IOMUXC_SAI3_RXC_GPIO4_IO29 0x83 + >; + }; + + pinctrl_wifi_pwr: wifipwrgrp { + fsl,pins = < + /* WIFI3V3_EN */ + MX8MQ_IOMUXC_NAND_DATA04_GPIO3_IO10 0x83 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + /* nWDOG */ + MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0x1f + >; + }; +}; + +&i2c1 { + clock-frequency = <387000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + typec_pd: usb-pd@3f { + compatible = "ti,tps6598x"; + reg = <0x3f>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_typec>, <&pinctrl_tcpc>; + interrupt-parent = <&gpio1>; + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "irq"; + + connector { + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_con_hs: endpoint { + remote-endpoint = <&typec_hs>; + }; + }; + + port@1 { + reg = <1>; + + usb_con_ss: endpoint { + remote-endpoint = <&typec_ss>; + }; + }; + }; + }; + }; + + pmic: pmic@4b { + compatible = "rohm,bd71837"; + reg = <0x4b>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + clocks = <&pmic_osc>; + clock-names = "osc"; + clock-output-names = "pmic_clk"; + interrupt-parent = <&gpio1>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + rohm,reset-snvs-powered; + + regulators { + buck1_reg: BUCK1 { + regulator-name = "buck1"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-ramp-delay = <1250>; + rohm,dvs-run-voltage = <900000>; + rohm,dvs-idle-voltage = <850000>; + rohm,dvs-suspend-voltage = <800000>; + regulator-always-on; + }; + + buck2_reg: BUCK2 { + regulator-name = "buck2"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-ramp-delay = <1250>; + rohm,dvs-run-voltage = <1000000>; + rohm,dvs-idle-voltage = <900000>; + regulator-always-on; + }; + + buck3_reg: BUCK3 { + regulator-name = "buck3"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + rohm,dvs-run-voltage = <900000>; + }; + + buck4_reg: BUCK4 { + regulator-name = "buck4"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + rohm,dvs-run-voltage = <1000000>; + }; + + buck5_reg: BUCK5 { + regulator-name = "buck5"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + regulator-boot-on; + regulator-always-on; + }; + + buck6_reg: BUCK6 { + regulator-name = "buck6"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + buck7_reg: BUCK7 { + regulator-name = "buck7"; + regulator-min-microvolt = <1605000>; + regulator-max-microvolt = <1995000>; + regulator-boot-on; + regulator-always-on; + }; + + buck8_reg: BUCK8 { + regulator-name = "buck8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: LDO1 { + regulator-name = "ldo1"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + /* leave on for snvs power button */ + regulator-always-on; + }; + + ldo2_reg: LDO2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + /* leave on for snvs power button */ + regulator-always-on; + }; + + ldo3_reg: LDO3 { + regulator-name = "ldo3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo4_reg: LDO4 { + regulator-name = "ldo4"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo5_reg: LDO5 { + /* VDD_PHY_0V9 - MIPI and HDMI domains */ + regulator-name = "ldo5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo6_reg: LDO6 { + /* VDD_PHY_0V9 - MIPI, HDMI and USB domains */ + regulator-name = "ldo6"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo7_reg: LDO7 { + /* VDD_PHY_3V3 - USB domain */ + regulator-name = "ldo7"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + + rtc@68 { + compatible = "microcrystal,rv4162"; + reg = <0x68>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rtc>; + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&i2c2 { + clock-frequency = <387000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + magnetometer@1e { + compatible = "st,lsm9ds1-magn"; + reg = <0x1e>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mag>; + interrupt-parent = <&gpio3>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; + vdd-supply = <&reg_vdd_sen>; + vddio-supply = <&reg_vdd_1v8>; + }; + + regulator@3e { + compatible = "tps65132"; + reg = <0x3e>; + + reg_lcd_avdd: outp { + regulator-name = "LCD_AVDD"; + vin-supply = <&reg_lcd_3v4>; + }; + + reg_lcd_avee: outn { + regulator-name = "LCD_AVEE"; + vin-supply = <&reg_lcd_3v4>; + }; + }; + + proximity: prox@60 { + compatible = "vishay,vcnl4040"; + reg = <0x60>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_prox>; + interrupt-parent = <&gpio3>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + }; + + accel_gyro: accel-gyro@6a { + compatible = "st,lsm9ds1-imu"; + reg = <0x6a>; + vdd-supply = <&reg_vdd_sen>; + vddio-supply = <&reg_vdd_1v8>; + }; +}; + +&i2c3 { + clock-frequency = <387000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + codec: audio-codec@1a { + compatible = "wlf,wm8962"; + reg = <0x1a>; + clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>; + assigned-clocks = <&clk IMX8MQ_CLK_SAI2>; + assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>; + assigned-clock-rates = <24576000>; + #sound-dai-cells = <0>; + mic-cfg = <0x200>; + DCVDD-supply = <&reg_aud_1v8>; + DBVDD-supply = <&reg_aud_1v8>; + AVDD-supply = <&reg_aud_1v8>; + CPVDD-supply = <&reg_aud_1v8>; + MICVDD-supply = <&reg_aud_1v8>; + PLLVDD-supply = <&reg_aud_1v8>; + SPKVDD1-supply = <&reg_vsys_3v4>; + SPKVDD2-supply = <&reg_vsys_3v4>; + gpio-cfg = < + 0x0000 /* n/c */ + 0x0001 /* gpio2, 1: default */ + 0x0013 /* gpio3, 2: dmicclk */ + 0x0000 /* n/c, 3: default */ + 0x8014 /* gpio5, 4: dmic_dat */ + 0x0000 /* gpio6, 5: default */ + >; + }; + + backlight@36 { + compatible = "ti,lm36922"; + reg = <0x36>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_bl>; + #address-cells = <1>; + #size-cells = <0>; + enable-gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>; + vled-supply = <&reg_vsys_3v4>; + ti,ovp-microvolt = <25000000>; + + led_backlight: led@0 { + reg = <0>; + label = ":backlight"; + linux,default-trigger = "backlight"; + led-max-microamp = <20000>; + }; + }; + + touchscreen@38 { + compatible = "edt,edt-ft5506"; + reg = <0x38>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touch>; + interrupt-parent = <&gpio1>; + interrupts = <27 IRQ_TYPE_EDGE_FALLING>; + touchscreen-size-x = <720>; + touchscreen-size-y = <1440>; + vcc-supply = <&reg_lcd_1v8>; + }; +}; + +&i2c4 { + clock-frequency = <387000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; + + bat: fuel-gauge@36 { + compatible = "maxim,max17055"; + reg = <0x36>; + interrupt-parent = <&gpio3>; + interrupts = <20 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gauge>; + maxim,over-heat-temp = <700>; + maxim,over-volt = <4500>; + maxim,rsns-microohm = <5000>; + }; + + bq25895: charger@6a { + compatible = "ti,bq25895", "ti,bq25890"; + reg = <0x6a>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_charger_in>; + interrupt-parent = <&gpio3>; + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + phys = <&usb3_phy0>; + ti,precharge-current = <130000>; /* uA */ + ti,minimum-sys-voltage = <3700000>; /* uV */ + ti,boost-voltage = <5000000>; /* uV */ + ti,boost-max-current = <500000>; /* uA */ + ti,use-vinmin-threshold = <1>; /* enable VINDPM */ + ti,vinmin-threshold = <3900000>; /* uV */ + monitored-battery = <&bat>; + power-supplies = <&typec_pd>; + }; +}; + +&lcdif { + status = "okay"; +}; + +&mipi_dsi { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + lcd_panel: panel@0 { + compatible = "mantix,mlaf057we51-x"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dsirst>; + avdd-supply = <&reg_lcd_avdd>; + avee-supply = <&reg_lcd_avee>; + vddi-supply = <&reg_lcd_1v8>; + backlight = <&backlight_dsi>; + reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; + mantix,tp-rstn-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; + + port { + panel_in: endpoint { + remote-endpoint = <&mipi_dsi_out>; + }; + }; + }; + + ports { + port@1 { + reg = <1>; + + mipi_dsi_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; +}; + +&pgc_gpu { + power-supply = <&buck3_reg>; +}; + +&pgc_mipi { + power-supply = <&ldo5_reg>; +}; + +&pgc_vpu { + power-supply = <&buck4_reg>; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_haptic>; + status = "okay"; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_led_b>; + status = "okay"; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_led_r>; + status = "okay"; +}; + +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_led_g>; + status = "okay"; +}; + +&sai2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai2>; + assigned-clocks = <&clk IMX8MQ_CLK_SAI2>; + assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>; + assigned-clock-rates = <24576000>; + status = "okay"; +}; + +&sai6 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai6>; + assigned-clocks = <&clk IMX8MQ_CLK_SAI6>; + assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>; + assigned-clock-rates = <24576000>; + fsl,sai-synchronous-rx; + status = "okay"; +}; + +&snvs_pwrkey { + status = "okay"; +}; + +&snvs_rtc { + status = "disabled"; +}; + +&uart1 { /* console */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { /* TPS - GPS - DEBUG */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; + + gnss { + compatible = "globaltop,pa6h"; + vcc-supply = <&reg_gnss>; + current-speed = <9600>; + }; +}; + +&uart3 { /* SMC */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&uart4 { /* BT */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + uart-has-rtscts; + status = "okay"; +}; + +&usb3_phy0 { + status = "okay"; +}; + +&usb3_phy1 { + vbus-supply = <&reg_hub>; + status = "okay"; +}; + +&usb_dwc3_0 { + #address-cells = <1>; + #size-cells = <0>; + dr_mode = "otg"; + snps,dis_u3_susphy_quirk; + status = "okay"; + + port@0 { + reg = <0>; + + typec_hs: endpoint { + remote-endpoint = <&usb_con_hs>; + }; + }; + + port@1 { + reg = <1>; + + typec_ss: endpoint { + remote-endpoint = <&usb_con_ss>; + }; + }; +}; + +&usb_dwc3_1 { + dr_mode = "host"; + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + /* Microchip USB2642 */ + hub@1 { + compatible = "usb424,2640"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + mass-storage@1 { + compatible = "usb424,4041"; + reg = <1>; + }; + }; +}; + +&usdhc1 { + assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>; + assigned-clock-rates = <400000000>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + bus-width = <8>; + vmmc-supply = <&reg_vdd_3v3>; + power-supply = <&reg_vdd_1v8>; + non-removable; + status = "okay"; +}; + +&usdhc2 { + assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>; + assigned-clock-rates = <200000000>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + bus-width = <4>; + vmmc-supply = <&reg_wifi_3v3>; + mmc-pwrseq = <&usdhc2_pwrseq>; + post-power-on-delay-ms = <1000>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + max-frequency = <50000000>; + disable-wp; + cap-sdio-irq; + keep-power-in-suspend; + wakeup-source; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; diff --git a/arch/arm/mach-imx/imx8m/Kconfig b/arch/arm/mach-imx/imx8m/Kconfig index fae70499953..4a430a34d99 100644 --- a/arch/arm/mach-imx/imx8m/Kconfig +++ b/arch/arm/mach-imx/imx8m/Kconfig @@ -203,6 +203,14 @@ config TARGET_IMX8MP_RSB3720A1_6G select IMX8MP select SUPPORT_SPL select IMX8M_LPDDR4 + +config TARGET_LIBREM5 + bool "Purism Librem5 Phone" + select BINMAN + select IMX8MQ + select SUPPORT_SPL + select IMX8M_LPDDR4 + endchoice source "board/advantech/imx8mp_rsb3720a1/Kconfig" @@ -220,6 +228,7 @@ source "board/kontron/pitx_imx8m/Kconfig" source "board/kontron/sl-mx8mm/Kconfig" source "board/phytec/phycore_imx8mm/Kconfig" source "board/phytec/phycore_imx8mp/Kconfig" +source "board/purism/librem5/Kconfig" source "board/ronetix/imx8mq-cm/Kconfig" source "board/technexion/pico-imx8mq/Kconfig" source "board/variscite/imx8mn_var_som/Kconfig" diff --git a/board/purism/librem5/Kconfig b/board/purism/librem5/Kconfig new file mode 100644 index 00000000000..cf0f303683e --- /dev/null +++ b/board/purism/librem5/Kconfig @@ -0,0 +1,15 @@ +if TARGET_LIBREM5 + +config SYS_BOARD + default "librem5" + +config SYS_VENDOR + default "purism" + +config SYS_CONFIG_NAME + default "librem5" + +config IMX_CONFIG + default "board/purism/librem5/imximage-8mq-lpddr4.cfg" + +endif diff --git a/board/purism/librem5/MAINTAINERS b/board/purism/librem5/MAINTAINERS new file mode 100644 index 00000000000..09e7f20e33c --- /dev/null +++ b/board/purism/librem5/MAINTAINERS @@ -0,0 +1,8 @@ +PURISM LIBREM5 PHONE +M: Angus Ainslie <angus(a)akkea.ca> +R: kernel(a)puri.sm +S: Supported +F: arch/arm/dts/imx8mq-librem5* +F: board/purism/librem5/ +F: configs/librem5_defconfig +F: include/configs/librem5.h diff --git a/board/purism/librem5/Makefile b/board/purism/librem5/Makefile new file mode 100644 index 00000000000..47f25f047b7 --- /dev/null +++ b/board/purism/librem5/Makefile @@ -0,0 +1,13 @@ +# +# Copyright 2017 NXP +# Copyright 2019 Purism +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += librem5.o + +ifdef CONFIG_SPL_BUILD +obj-y += spl.o +obj-$(CONFIG_IMX8M_LPDDR4) += lpddr4_timing.o lpddr4_timing_b0.o +endif diff --git a/board/purism/librem5/imximage-8mq-lpddr4.cfg b/board/purism/librem5/imximage-8mq-lpddr4.cfg new file mode 100644 index 00000000000..648471028f6 --- /dev/null +++ b/board/purism/librem5/imximage-8mq-lpddr4.cfg @@ -0,0 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2021 NXP + */ + +BOOT_FROM sd +SIGNED_HDMI signed_dp_imx8m.bin +LOADER u-boot-spl-ddr.bin 0x7E1000 diff --git a/board/purism/librem5/librem5.c b/board/purism/librem5/librem5.c new file mode 100644 index 00000000000..1f302e1fa13 --- /dev/null +++ b/board/purism/librem5/librem5.c @@ -0,0 +1,483 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018 NXP + * Copyright 2021 Purism + */ + +#include <common.h> +#include <malloc.h> +#include <errno.h> +#include <asm/io.h> +#include <miiphy.h> +#include <asm/mach-imx/iomux-v3.h> +#include <asm-generic/gpio.h> +#include <asm/arch/sys_proto.h> +#include <fsl_esdhc.h> +#include <mmc.h> +#include <asm/arch/imx8mq_pins.h> +#include <asm/arch/sys_proto.h> +#include <asm/mach-imx/gpio.h> +#include <asm/mach-imx/mxc_i2c.h> +#include <asm/arch/clock.h> +#include <asm/mach-imx/video.h> +#include <fuse.h> +#include <i2c.h> +#include <spl.h> +#include <usb.h> +#include <dwc3-uboot.h> +#include <linux/delay.h> +#include <linux/bitfield.h> +#include <power/regulator.h> +#include <usb/xhci.h> +#include "librem5.h" + +DECLARE_GLOBAL_DATA_PTR; + +int board_early_init_f(void) +{ + return 0; +} + +int ft_board_setup(void *blob, struct bd_info *bd) +{ + return 0; +} + +int board_postclk_init(void) +{ + return 0; +} + +uint board_mmc_get_env_part(struct mmc *mmc) +{ + uint part = (mmc->part_config >> 3) & PART_ACCESS_MASK; + + if (part == 7) + part = 0; + return part; +} + +int bq_read_reg(int reg_index) +{ + struct udevice *udev, *bus; + u8 reg; + int ret; + + ret = uclass_get_device_by_seq(UCLASS_I2C, 3, &bus); + if (ret) { + log_err("%s: No bus %d\n", __func__, 3); + return -ENODEV; + } + + ret = i2c_get_chip(bus, 0x6a, 1, &udev); + if (ret) { + log_err("%s: setting chip offset failed %d\n", __func__, ret); + return -EINVAL; + } + + dm_i2c_read(udev, reg_index, &reg, 1); + + return reg; +} + +int bq_write_reg(int reg_index, u8 val) +{ + struct udevice *udev, *bus; + int ret; + + ret = uclass_get_device_by_seq(UCLASS_I2C, 3, &bus); + if (ret) { + log_err("%s: No bus %d\n", __func__, 3); + return 1; + } + + ret = i2c_get_chip(bus, 0x6a, 1, &udev); + if (ret) { + log_err("%s: setting chip offset failed %d\n", __func__, ret); + return 1; + } + + dm_i2c_write(udev, reg_index, &val, 1); + + return 0; +} + +int read_vbat(void) +{ + u8 reg02, reg03, reg0e; + int timeout = 1000; // ms + + /* disable the charger and enable BAT_LOADEN to discharge the decoupling + * CAP + * https://e2e.ti.com/support/power-management/f/196/t/567401 + */ + reg03 = bq_read_reg(0x03); + bq_write_reg(0x03, (reg03 | 0x80) & ~0x10); + + mdelay(10); + + /* force a conversion */ + reg02 = bq_read_reg(0x02); + bq_write_reg(0x02, (reg02 | 0x80) & ~0x40); + + do { + mdelay(10); + timeout -= 10; + } while ((bq_read_reg(0x02) & 0x80) && (timeout > 0)); + + reg0e = bq_read_reg(0x0e); + + /* return the charger to it's original state */ + bq_write_reg(0x03, reg03); + bq_write_reg(0x02, reg02); + + return (reg0e & 0x7f) * 20 + 2304; +} + +int tps65982_wait_for_app(int timeout, int timeout_step) +{ + int ret; + char response[6]; + struct udevice *udev, *bus; + + log_debug("%s: starting\n", __func__); + + /* Set the i2c bus */ + ret = uclass_get_device_by_seq(UCLASS_I2C, 0, &bus); + if (ret) { + log_err("%s: No bus %d\n", __func__, 0); + return 1; + } + + ret = i2c_get_chip(bus, 0x3f, 1, &udev); + if (ret) { + log_err("%s: setting chip offset failed %d\n", __func__, ret); + return 1; + } + + while (timeout > 0) { + ret = dm_i2c_read(udev, 0x03, (u8 *)response, 5); + log_debug("tps65982 mode %s\n", response); + if (response[1] == 'A') + return 0; + mdelay(timeout_step); + timeout -= timeout_step; + log_debug("tps65982 waited %d ms %c\n", timeout_step, response[1]); + } + + return 1; +} + +#define TPS_POWER_STATUS_PWROPMODE(x) FIELD_GET(GENMASK(3, 2), x) + +#define TPS_PDO_CONTRACT_TYPE(x) FIELD_GET(GENMASK(31, 30), x) +#define TPS_PDO_CONTRACT_FIXED 0 +#define TPS_PDO_CONTRACT_BATTERY 1 +#define TPS_PDO_CONTRACT_VARIABLE 2 + +#define TPS_TYPEC_PWR_MODE_USB 0 +#define TPS_TYPEC_PWR_MODE_1_5A 1 +#define TPS_TYPEC_PWR_MODE_3_0A 2 +#define TPS_TYPEC_PWR_MODE_PD 3 + +#define TPS_PDO_FIXED_CONTRACT_MAX_CURRENT(x) (FIELD_GET(GENMASK(9, 0), x) * 10) +#define TPS_PDO_VAR_CONTRACT_MAX_CURRENT(x) (FIELD_GET(GENMASK(9, 0), x) * 10) +#define TPS_PDO_BAT_CONTRACT_MAX_VOLTAGE(x) (FIELD_GET(GENMASK(29, 20), x) * 50) +#define TPS_PDO_BAT_CONTRACT_MAX_POWER(x) (FIELD_GET(GENMASK(9, 0), x) * 250) + +int tps65982_get_max_current(void) +{ + int ret; + u8 buf[7]; + u8 pwr_status; + u32 contract; + int type, mode; + struct udevice *udev, *bus; + + log_debug("%s: starting\n", __func__); + + /* Set the i2c bus */ + ret = uclass_get_device_by_seq(UCLASS_I2C, 0, &bus); + if (ret) { + log_debug("%s: No bus %d\n", __func__, 0); + return -1; + } + + ret = i2c_get_chip(bus, 0x3f, 1, &udev); + if (ret) { + log_debug("%s: setting chip offset failed %d\n", __func__, ret); + return -1; + } + + ret = dm_i2c_read(udev, 0x3f, buf, 3); + if (ret) { + log_debug("%s: reading pwr_status failed %d\n", __func__, ret); + return -1; + } + + pwr_status = buf[1]; + + if (!(pwr_status & 1)) + return 0; + + mode = TPS_POWER_STATUS_PWROPMODE(pwr_status); + switch (mode) { + case TPS_TYPEC_PWR_MODE_1_5A: + return 1500; + case TPS_TYPEC_PWR_MODE_3_0A: + return 3000; + case TPS_TYPEC_PWR_MODE_PD: + ret = dm_i2c_read(udev, 0x34, buf, 7); + if (ret) { + log_debug("%s: reading active contract failed %d\n", __func__, ret); + return -1; + } + + contract = buf[1] + (buf[2] << 8) + (buf[3] << 16) + (buf[4] << 24); + + type = TPS_PDO_CONTRACT_TYPE(contract); + + switch (type) { + case TPS_PDO_CONTRACT_FIXED: + return TPS_PDO_FIXED_CONTRACT_MAX_CURRENT(contract); + case TPS_PDO_CONTRACT_BATTERY: + return 1000 * TPS_PDO_BAT_CONTRACT_MAX_POWER(contract) + / TPS_PDO_BAT_CONTRACT_MAX_VOLTAGE(contract); + case TPS_PDO_CONTRACT_VARIABLE: + return TPS_PDO_VAR_CONTRACT_MAX_CURRENT(contract); + default: + log_debug("Unknown contract type: %d\n", type); + return -1; + } + case TPS_TYPEC_PWR_MODE_USB: + return 500; + default: + log_debug("Unknown power mode: %d\n", mode); + return -1; + } +} + +int init_tps65982(void) +{ + int vbat; + + log_debug("%s: starting\n", __func__); + + if (tps65982_wait_for_app(500, 100)) { + /* check that VBAT is present and greater than 3000 mV. resetting the + * tps65982 disconnects VBUS so we need a different power source. + * Battery voltage greater than 4.15V likely means the battery is not + * present. + */ + vbat = read_vbat(); + log_err("tps65982 APP boot failed %d mV\n", vbat); + return 1; + } + + log_info("tps65982 boot successful\n"); + return 0; +} + +int bq25896_set_iinlim(int current) +{ + u8 val, iinlim; + int ret; + struct udevice *udev, *bus; + + /* Set the i2c bus */ + ret = uclass_get_device_by_seq(UCLASS_I2C, 3, &bus); + if (ret) { + log_err("%s: No bus 3\n", __func__); + return ret; + } + + ret = i2c_get_chip(bus, 0x6a, 1, &udev); + if (ret) { + log_err("%s: setting chip offset failed %d\n", __func__, ret); + return ret; + } + + if (current > 3250) + current = 3250; + if (current < 100) + current = 100; + + val = dm_i2c_reg_read(udev, 0x00); + iinlim = ((current - 100) / 50) & 0x3f; + val = (val & 0xc0) | iinlim; + dm_i2c_reg_write(udev, 0x00, val); + log_debug("REG00 0x%x\n", val); + + return 0; +} + +/* + * set some safe defaults for the battery charger + */ +int init_charger_bq25896(void) +{ + u8 val; + int iinlim, vbat, ret; + struct udevice *udev, *bus; + + /* Set the i2c bus */ + ret = uclass_get_device_by_seq(UCLASS_I2C, 3, &bus); + if (ret) { + log_debug("%s: No bus 3\n", __func__); + return ret; + } + + ret = i2c_get_chip(bus, 0x6a, 1, &udev); + if (ret) { + log_debug("%s: setting chip offset failed %d\n", __func__, ret); + return ret; + } + + /* enable automatic DC conversions */ + val = dm_i2c_reg_read(udev, 0x02); + log_debug("REG0B 0x%x\n", val); + val = (val & ~0xc0) | 0x40; + dm_i2c_reg_write(udev, 0x02, val); + + /* check VBUS good */ + val = dm_i2c_reg_read(udev, 0x11); + log_debug("VBUS good %d\n", (val >> 7) & 1); + log_debug("VBUS mV %d\n", (val & 0x7f) * 100 + 2600); + + val = dm_i2c_reg_read(udev, 0x0b); + log_debug("REG0B 0x%x\n", val); + + log_debug("VBUS_STAT 0x%x\n", val >> 5); + switch (val >> 5) { + case 0: + log_debug("VBUS not detected\n"); + break; + case 1: + log_debug("USB SDP IINLIM 500mA\n"); + break; + case 2: + log_debug("USB CDP IINLIM 1500mA\n"); + break; + case 3: + log_debug("USB DCP IINLIM 3500mA\n"); + break; + case 4: + log_debug("MAXCHARGE IINLIM 1500mA\n"); + break; + case 5: + log_debug("Unknown IINLIM 500mA\n"); + break; + case 6: + log_debug("DIVIDER IINLIM > 1000mA\n"); + break; + case 7: + log_debug("OTG\n"); + break; + }; + + log_debug("CHRG_STAT 0x%x\n", (val >> 3) & 0x3); + log_debug("PG_STAT 0x%x\n", (val >> 2) & 1); + log_debug("SDP_STAT 0x%x\n", (val >> 1) & 1); + log_debug("VSYS_STAT 0x%x\n", val & 1); + + val = dm_i2c_reg_read(udev, 0x00); + log_debug("REG00 0x%x\n", val); + iinlim = 100 + (val & 0x3f) * 50; + log_debug("IINLIM %d mA\n", iinlim); + log_debug("EN_HIZ 0x%x\n", (val >> 7) & 1); + log_debug("EN_ILIM 0x%x\n", (val >> 6) & 1); + + /* check VBAT */ + vbat = read_vbat(); + log_debug("VBAT mV %d\n", vbat); + + if (vbat < 2800 && iinlim <= 500) { + /* battery voltage too low and + * insufficient current to boot linux. + */ + log_err("%s: voltage and current too low linux probably won't boot\n", __func__); + } + + /* set 1.6A charge limit */ + dm_i2c_reg_write(udev, 0x04, 0x19); + + /* re-enable charger */ + val = dm_i2c_reg_read(udev, 0x03); + val = val | 0x10; + dm_i2c_reg_write(udev, 0x03, val); + + /* limit the VINDPM to 3.9V */ + dm_i2c_reg_write(udev, 0x0d, 0x8d); + + /* set the max voltage to 4.192V */ + val = dm_i2c_reg_read(udev, 0x6); + val = (val & ~0xFC) | 0x16 << 2; + dm_i2c_reg_write(udev, 0x6, val); + + /* set the SYS_MIN to 3.7V */ + val = dm_i2c_reg_read(udev, 0x3); + val = val | 0xE; + dm_i2c_reg_write(udev, 0x3, val); + + return 0; +} + +int board_init(void) +{ + struct udevice *dev; + int tps_ret; + + log_debug("%s: initializing USB clk\n", __func__); + + /* init_usb_clk won't enable the second clock if it's a USB boot */ + if (is_usb_boot()) { + imx8m_usb_power(1, true); + + clock_enable(CCGR_USB_CTRL2, 1); + clock_enable(CCGR_USB_PHY2, 1); + } + + printf("Enabling regulator-hub\n"); + if (!regulator_get_by_devname("regulator-hub", &dev)) { + if (regulator_set_enable(dev, true)) + printf("Failed to enable regulator-hub\n"); + } + + tps_ret = init_tps65982(); + init_charger_bq25896(); + + if (!tps_ret) { + int current = tps65982_get_max_current(); + + if (current > 500) + bq25896_set_iinlim(current); + } + + return 0; +} + +int board_late_init(void) +{ + u32 rev; + char rev_str[3]; + + env_set("board_name", "librem5"); + if (fuse_read(9, 0, &rev)) { + env_set("board_rev", BOARD_REV_ERROR); + } else if (rev == 0) { + env_set("board_rev", BOARD_REV_UNKNOWN); + } else if (rev > 0) { + sprintf(rev_str, "%u", rev); + env_set("board_rev", rev_str); + } + + printf("Board name: %s\n", env_get("board_name")); + printf("Board rev: %s\n", env_get("board_rev")); + + if (is_usb_boot()) { + puts("USB Boot\n"); + env_set("bootcmd", "fastboot 0"); + } + + return 0; +} diff --git a/board/purism/librem5/librem5.h b/board/purism/librem5/librem5.h new file mode 100644 index 00000000000..e0c0a8d00ee --- /dev/null +++ b/board/purism/librem5/librem5.h @@ -0,0 +1,182 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2021 Purism + */ + +#ifndef __LIBREM5_H__ +#define __LIBREM5_H__ + +#define CAMERA_EN IMX_GPIO_NR(1, 0) +#define SD_EN IMX_GPIO_NR(1, 3) +#define AUDIO_EN IMX_GPIO_NR(1, 4) +#define DSI_EN IMX_GPIO_NR(1, 5) +#define SMC_EN IMX_GPIO_NR(1, 6) +#define TYPEC_MUX_EN IMX_GPIO_NR(1, 11) +#define HUB_NRESET IMX_GPIO_NR(1, 12) +#define HUB_EN IMX_GPIO_NR(1, 14) +#define VOL_UP IMX_GPIO_NR(1, 16) +#define VOL_DOWN IMX_GPIO_NR(1, 17) +#define DSI_BIAS_EN IMX_GPIO_NR(1, 20) +#define FLASH_EN IMX_GPIO_NR(1, 23) +#define WWAN_NRESET IMX_GPIO_NR(3, 1) +#define CHG_EN IMX_GPIO_NR(3, 2) +#define CHG_OTG_OUT_EN IMX_GPIO_NR(3, 4) +#define WIFI_EN IMX_GPIO_NR(3, 10) +#define GPS_EN IMX_GPIO_NR(3, 12) +#define BL_EN IMX_GPIO_NR(3, 14) +#define WWAN_EN IMX_GPIO_NR(3, 18) +#define NFC_EN IMX_GPIO_NR(4, 28) +#define LED_G IMX_GPIO_NR(5, 2) +#define LED_R IMX_GPIO_NR(5, 3) +#define LED_B IMX_GPIO_NR(1, 13) +#define MOTO IMX_GPIO_NR(5, 5) +#define SPI1_SCLK IMX_GPIO_NR(5, 6) +#define SPI1_MOSI IMX_GPIO_NR(5, 7) +#define SPI1_MISO IMX_GPIO_NR(5, 8) +#define SPI1_SS0 IMX_GPIO_NR(5, 9) + +#define UART1_TX IMX_GPIO_NR(5, 23) +#define UART1_RX IMX_GPIO_NR(5, 22) +#define UART2_TX IMX_GPIO_NR(5, 25) +#define UART2_RX IMX_GPIO_NR(5, 24) +#define UART3_TX IMX_GPIO_NR(5, 27) +#define UART3_RX IMX_GPIO_NR(5, 26) +#define UART4_TX IMX_GPIO_NR(5, 11) +#define UART4_RX IMX_GPIO_NR(5, 10) + +#define TPS_RESET IMX_GPIO_NR(3, 24) + +#define PURISM_VID 0x316d +#define PURISM_PID 0x4c05 + +#define BOARD_REV_ERROR "unknown" +#define BOARD_REV_BIRCH "1" +#define BOARD_REV_CHESTNUT "2" +#define BOARD_REV_DOGWOOD "3" +#define BOARD_REV_EVERGREEN "4" +/* Could be ASPEN, BIRCH or CHESTNUT. assume CHESTNUT */ +#define BOARD_REV_UNKNOWN BOARD_REV_CHESTNUT + +#ifdef CONFIG_SPL_BUILD +static const iomux_v3_cfg_t configure_pads[] = { + IMX8MQ_PAD_GPIO1_IO00__GPIO1_IO0 | MUX_PAD_CTRL(PAD_CTL_DSE6), + IMX8MQ_PAD_GPIO1_IO03__GPIO1_IO3 | MUX_PAD_CTRL(PAD_CTL_DSE6) | MUX_MODE_SION, + IMX8MQ_PAD_GPIO1_IO04__GPIO1_IO4 | MUX_PAD_CTRL(PAD_CTL_DSE6), + IMX8MQ_PAD_GPIO1_IO05__GPIO1_IO5 | MUX_PAD_CTRL(PAD_CTL_DSE6) | MUX_MODE_SION, + IMX8MQ_PAD_GPIO1_IO06__GPIO1_IO6 | MUX_PAD_CTRL(PAD_CTL_DSE6), + IMX8MQ_PAD_GPIO1_IO11__GPIO1_IO11 | MUX_PAD_CTRL(PAD_CTL_DSE6), + IMX8MQ_PAD_GPIO1_IO12__GPIO1_IO12 | MUX_PAD_CTRL(PAD_CTL_DSE6) | MUX_MODE_SION, + IMX8MQ_PAD_GPIO1_IO13__GPIO1_IO13 | MUX_PAD_CTRL(PAD_CTL_DSE6) | MUX_MODE_SION, + IMX8MQ_PAD_GPIO1_IO14__GPIO1_IO14 | MUX_PAD_CTRL(PAD_CTL_DSE6) | MUX_MODE_SION, + IMX8MQ_PAD_ENET_MDC__GPIO1_IO16 | MUX_PAD_CTRL(PAD_CTL_PUE), + IMX8MQ_PAD_ENET_MDIO__GPIO1_IO17 | MUX_PAD_CTRL(PAD_CTL_PUE), + IMX8MQ_PAD_ENET_TD1__GPIO1_IO20 | MUX_PAD_CTRL(PAD_CTL_DSE6), + IMX8MQ_PAD_ENET_TXC__GPIO1_IO23 | MUX_PAD_CTRL(PAD_CTL_DSE6), + IMX8MQ_PAD_NAND_CE0_B__GPIO3_IO1 | MUX_PAD_CTRL(PAD_CTL_DSE6), + IMX8MQ_PAD_NAND_CE1_B__GPIO3_IO2 | MUX_PAD_CTRL(PAD_CTL_DSE6), + IMX8MQ_PAD_NAND_CE3_B__GPIO3_IO4 | MUX_PAD_CTRL(PAD_CTL_DSE6), + IMX8MQ_PAD_NAND_DATA04__GPIO3_IO10 | MUX_PAD_CTRL(PAD_CTL_DSE6), + IMX8MQ_PAD_NAND_DATA06__GPIO3_IO12 | MUX_PAD_CTRL(PAD_CTL_DSE6), + IMX8MQ_PAD_NAND_DQS__GPIO3_IO14 | MUX_PAD_CTRL(PAD_CTL_DSE6), + IMX8MQ_PAD_NAND_WP_B__GPIO3_IO18 | MUX_PAD_CTRL(PAD_CTL_DSE6), + IMX8MQ_PAD_SAI3_RXFS__GPIO4_IO28 | MUX_PAD_CTRL(PAD_CTL_DSE6), + IMX8MQ_PAD_SAI3_MCLK__GPIO5_IO2 | MUX_PAD_CTRL(PAD_CTL_DSE6) | MUX_MODE_SION, + IMX8MQ_PAD_SPDIF_TX__GPIO5_IO3 | MUX_PAD_CTRL(PAD_CTL_DSE6) | MUX_MODE_SION, + IMX8MQ_PAD_SAI5_RXD3__GPIO3_IO24 | MUX_PAD_CTRL(PAD_CTL_DSE6) | MUX_MODE_SION, +}; + +static inline void init_pinmux(void) +{ + imx_iomux_v3_setup_multiple_pads(configure_pads, ARRAY_SIZE(configure_pads)); + + gpio_request(LED_R, "LED_R"); + gpio_request(LED_G, "LED_G"); + gpio_request(LED_B, "LED_B"); + gpio_request(VOL_UP, "VOL_UP"); + gpio_request(VOL_DOWN, "VOL_DOWN"); + + gpio_request(NFC_EN, "NFC_EN"); + gpio_request(CHG_EN, "CHG_EN"); + gpio_request(CHG_OTG_OUT_EN, "CHG_OTG_OUT_EN"); + + gpio_request(TYPEC_MUX_EN, "TYPEC_MUX_EN"); + + gpio_request(TPS_RESET, "TPS_RESET"); + + gpio_request(WWAN_EN, "WWAN_EN"); + gpio_request(WWAN_NRESET, "WWAN_NRESET"); + + gpio_request(HUB_EN, "HUB_EN"); + gpio_request(HUB_NRESET, "HUB_NRESET"); + gpio_request(SD_EN, "SD_EN"); + gpio_request(AUDIO_EN, "AUDIO_EN"); + gpio_request(DSI_EN, "DSI_EN"); + gpio_request(SMC_EN, "SMC_EN"); + gpio_request(CAMERA_EN, "CAMERA_EN"); + gpio_request(FLASH_EN, "FLASH_EN"); + gpio_request(DSI_BIAS_EN, "DSI_BIAS_EN"); + gpio_request(GPS_EN, "GPS_EN"); + gpio_request(BL_EN, "BL_EN"); +#ifndef CONSOLE_ON_UART4 + gpio_request(WIFI_EN, "WIFI_EN"); + gpio_direction_output(WIFI_EN, 0); +#endif /* CONSOLE_ON_UART4 */ + gpio_direction_input(VOL_UP); + gpio_direction_input(VOL_DOWN); + + /* ensure charger is in the automated mode */ + gpio_direction_output(NFC_EN, 0); + gpio_direction_output(CHG_EN, 0); + gpio_direction_output(CHG_OTG_OUT_EN, 0); + + gpio_direction_input(TYPEC_MUX_EN); + + gpio_direction_output(TPS_RESET, 0); + + gpio_direction_output(WWAN_EN, 0); + gpio_direction_output(WWAN_NRESET, 1); + + gpio_direction_output(HUB_EN, 1); + gpio_direction_output(HUB_NRESET, 1); + mdelay(10); + gpio_direction_output(SD_EN, 1); + gpio_direction_output(SMC_EN, 0); + gpio_direction_output(CAMERA_EN, 0); + gpio_direction_output(FLASH_EN, 0); + gpio_direction_output(DSI_BIAS_EN, 0); + gpio_direction_output(GPS_EN, 0); + gpio_direction_output(BL_EN, 0); + + /* turn these on for i2c busses */ + gpio_direction_output(AUDIO_EN, 1); + gpio_direction_output(DSI_EN, 1); +} +#endif /* CONFIG_SPL_BUILD */ + +#define USB1_BASE_ADDR 0x38100000 +#define USB2_BASE_ADDR 0x38200000 +#define USB1_PHY_BASE_ADDR 0x381F0000 +#define USB2_PHY_BASE_ADDR 0x382F0000 + +#define USB_PHY_CTRL0 0xF0040 +#define USB_PHY_CTRL0_REF_SSP_EN BIT(2) +#define USB_PHY_CTRL0_SSC_RANGE_MASK GENMASK(23, 21) +#define USB_PHY_CTRL0_SSC_RANGE_4003PPM (0x2 << 21) + +#define USB_PHY_CTRL1 0xF0044 +#define USB_PHY_CTRL1_RESET BIT(0) +#define USB_PHY_CTRL1_COMMONONN BIT(1) +#define USB_PHY_CTRL1_ATERESET BIT(3) +#define USB_PHY_CTRL1_VDATSRCENB0 BIT(19) +#define USB_PHY_CTRL1_VDATDETENB0 BIT(20) + +#define USB_PHY_CTRL2 0xF0048 +#define USB_PHY_CTRL2_TXENABLEN0 BIT(8) + +#define USB_PHY_CTRL6 0x18 +#define USB_PHY_CTRL6_RXTERM_OVERRIDE_SEL BIT(29) + +extern struct dram_timing_info dram_timing_b0; +extern int board_ecspi_init(void); + +#endif diff --git a/board/purism/librem5/lpddr4_timing.c b/board/purism/librem5/lpddr4_timing.c new file mode 100644 index 00000000000..46bc7f8591c --- /dev/null +++ b/board/purism/librem5/lpddr4_timing.c @@ -0,0 +1,1324 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018 NXP + */ + +#include <linux/kernel.h> +#include <common.h> +#include <asm/arch/ddr.h> +#include <asm/arch/lpddr4_define.h> + +#define WR_POST_EXT_3200 /* recommened to define */ + +struct dram_cfg_param lpddr4_ddrc_cfg[] = { + /* Start to config, default 3200mbps */ + { DDRC_DBG1(0), 0x00000001 }, + { DDRC_PWRCTL(0), 0x00000001 }, + { DDRC_MSTR(0), 0xa3080020 }, + { DDRC_MSTR2(0), 0x00000000 }, + { DDRC_RFSHTMG(0), 0x006100E0 }, + { DDRC_INIT0(0), 0xC003061B }, + { DDRC_INIT1(0), 0x009D0000 }, + { DDRC_INIT3(0), 0x00D4002D }, +#ifdef WR_POST_EXT_3200 + { DDRC_INIT4(0), 0x00330008 }, +#else + { DDRC_INIT4(0), 0x00310008 }, +#endif + { DDRC_INIT6(0), 0x0066004a }, + { DDRC_INIT7(0), 0x0006004a }, + + { DDRC_DRAMTMG0(0), 0x1A201B22 }, + { DDRC_DRAMTMG1(0), 0x00060633 }, + { DDRC_DRAMTMG3(0), 0x00C0C000 }, + { DDRC_DRAMTMG4(0), 0x0F04080F }, + { DDRC_DRAMTMG5(0), 0x02040C0C }, + { DDRC_DRAMTMG6(0), 0x01010007 }, + { DDRC_DRAMTMG7(0), 0x00000401 }, + { DDRC_DRAMTMG12(0), 0x00020600 }, + { DDRC_DRAMTMG13(0), 0x0C100002 }, + { DDRC_DRAMTMG14(0), 0x000000E6 }, + { DDRC_DRAMTMG17(0), 0x00A00050 }, + + { DDRC_ZQCTL0(0), 0x03200018 }, + { DDRC_ZQCTL1(0), 0x028061A8 }, + { DDRC_ZQCTL2(0), 0x00000000 }, + + { DDRC_DFITMG0(0), 0x0497820A }, + { DDRC_DFITMG1(0), 0x00080303 }, + { DDRC_DFIUPD0(0), 0xE0400018 }, + { DDRC_DFIUPD1(0), 0x00DF00E4 }, + { DDRC_DFIUPD2(0), 0x80000000 }, + { DDRC_DFIMISC(0), 0x00000011 }, + { DDRC_DFITMG2(0), 0x0000170A }, + + { DDRC_DBICTL(0), 0x00000001 }, + { DDRC_DFIPHYMSTR(0), 0x00000001 }, + { DDRC_RANKCTL(0), 0x00000c99 }, + { DDRC_DRAMTMG2(0), 0x070E171a }, + + /* address mapping */ + { DDRC_ADDRMAP0(0), 0x00000015 }, + { DDRC_ADDRMAP3(0), 0x00000000 }, + { DDRC_ADDRMAP4(0), 0x00001F1F }, + /* bank interleave */ + { DDRC_ADDRMAP1(0), 0x00080808 }, + { DDRC_ADDRMAP5(0), 0x07070707 }, + { DDRC_ADDRMAP6(0), 0x08080707 }, + + /* performance setting */ + { DDRC_ODTCFG(0), 0x0b060908 }, + { DDRC_ODTMAP(0), 0x00000000 }, + { DDRC_SCHED(0), 0x29511505 }, + { DDRC_SCHED1(0), 0x0000002c }, + { DDRC_PERFHPR1(0), 0x5900575b }, + /* 150T starve and 0x90 max tran len */ + { DDRC_PERFLPR1(0), 0x90000096 }, + /* 300T starve and 0x10 max tran len */ + { DDRC_PERFWR1(0), 0x1000012c }, + { DDRC_DBG0(0), 0x00000016 }, + { DDRC_DBG1(0), 0x00000000 }, + { DDRC_DBGCMD(0), 0x00000000 }, + { DDRC_SWCTL(0), 0x00000001 }, + { DDRC_POISONCFG(0), 0x00000011 }, + { DDRC_PCCFG(0), 0x00000111 }, + { DDRC_PCFGR_0(0), 0x000010f3 }, + { DDRC_PCFGW_0(0), 0x000072ff }, + { DDRC_PCTRL_0(0), 0x00000001 }, + /* disable Read Qos*/ + { DDRC_PCFGQOS0_0(0), 0x00000e00 }, + { DDRC_PCFGQOS1_0(0), 0x0062ffff }, + /* disable Write Qos*/ + { DDRC_PCFGWQOS0_0(0), 0x00000e00 }, + { DDRC_PCFGWQOS1_0(0), 0x0000ffff }, + + /* Frequency 1: 400mbps */ + { DDRC_FREQ1_DRAMTMG0(0), 0x0d0b010c }, + { DDRC_FREQ1_DRAMTMG1(0), 0x00030410 }, + { DDRC_FREQ1_DRAMTMG2(0), 0x0305090c }, + { DDRC_FREQ1_DRAMTMG3(0), 0x00505006 }, + { DDRC_FREQ1_DRAMTMG4(0), 0x05040305 }, + { DDRC_FREQ1_DRAMTMG5(0), 0x0d0e0504 }, + { DDRC_FREQ1_DRAMTMG6(0), 0x0a060004 }, + { DDRC_FREQ1_DRAMTMG7(0), 0x0000090e }, + { DDRC_FREQ1_DRAMTMG14(0), 0x00000032 }, + { DDRC_FREQ1_DRAMTMG15(0), 0x00000000 }, + { DDRC_FREQ1_DRAMTMG17(0), 0x0036001b }, + { DDRC_FREQ1_DERATEINT(0), 0x7e9fbeb1 }, + { DDRC_FREQ1_DFITMG0(0), 0x03818200 }, + { DDRC_FREQ1_DFITMG2(0), 0x00000000 }, + { DDRC_FREQ1_RFSHTMG(0), 0x000C001c }, + { DDRC_FREQ1_INIT3(0), 0x00840000 }, + { DDRC_FREQ1_INIT4(0), 0x00310008 }, + { DDRC_FREQ1_INIT6(0), 0x0066004a }, + { DDRC_FREQ1_INIT7(0), 0x0006004a }, + + /* Frequency 2: 100mbps */ + { DDRC_FREQ2_DRAMTMG0(0), 0x0d0b010c }, + { DDRC_FREQ2_DRAMTMG1(0), 0x00030410 }, + { DDRC_FREQ2_DRAMTMG2(0), 0x0305090c }, + { DDRC_FREQ2_DRAMTMG3(0), 0x00505006 }, + { DDRC_FREQ2_DRAMTMG4(0), 0x05040305 }, + { DDRC_FREQ2_DRAMTMG5(0), 0x0d0e0504 }, + { DDRC_FREQ2_DRAMTMG6(0), 0x0a060004 }, + { DDRC_FREQ2_DRAMTMG7(0), 0x0000090e }, + { DDRC_FREQ2_DRAMTMG14(0), 0x00000032 }, + { DDRC_FREQ2_DRAMTMG17(0), 0x0036001b }, + { DDRC_FREQ2_DERATEINT(0), 0x7e9fbeb1 }, + { DDRC_FREQ2_DFITMG0(0), 0x03818200 }, + { DDRC_FREQ2_DFITMG2(0), 0x00000000 }, + { DDRC_FREQ2_RFSHTMG(0), 0x00030007 }, + { DDRC_FREQ2_INIT3(0), 0x00840000 }, + { DDRC_FREQ2_INIT4(0), 0x00310008 }, + { DDRC_FREQ2_INIT6(0), 0x0066004a }, + { DDRC_FREQ2_INIT7(0), 0x0006004a }, +}; + +/* PHY Initialize Configuration */ +struct dram_cfg_param lpddr4_ddrphy_cfg[] = { + { 0x20110, 0x02 }, + { 0x20111, 0x03 }, + { 0x20112, 0x04 }, + { 0x20113, 0x05 }, + { 0x20114, 0x00 }, + { 0x20115, 0x01 }, + + { 0x1005f, 0x1ff }, + { 0x1015f, 0x1ff }, + { 0x1105f, 0x1ff }, + { 0x1115f, 0x1ff }, + { 0x1205f, 0x1ff }, + { 0x1215f, 0x1ff }, + { 0x1305f, 0x1ff }, + { 0x1315f, 0x1ff }, + + { 0x11005f, 0x1ff }, + { 0x11015f, 0x1ff }, + { 0x11105f, 0x1ff }, + { 0x11115f, 0x1ff }, + { 0x11205f, 0x1ff }, + { 0x11215f, 0x1ff }, + { 0x11305f, 0x1ff }, + { 0x11315f, 0x1ff }, + + { 0x21005f, 0x1ff }, + { 0x21015f, 0x1ff }, + { 0x21105f, 0x1ff }, + { 0x21115f, 0x1ff }, + { 0x21205f, 0x1ff }, + { 0x21215f, 0x1ff }, + { 0x21305f, 0x1ff }, + { 0x21315f, 0x1ff }, + + { 0x55, 0x1ff }, + { 0x1055, 0x1ff }, + { 0x2055, 0x1ff }, + { 0x3055, 0x1ff }, + { 0x4055, 0x1ff }, + { 0x5055, 0x1ff }, + { 0x6055, 0x1ff }, + { 0x7055, 0x1ff }, + { 0x8055, 0x1ff }, + { 0x9055, 0x1ff }, + + { 0x200c5, 0x19 }, + { 0x1200c5, 0x7 }, + { 0x2200c5, 0x7 }, + + { 0x2002e, 0x2 }, + { 0x12002e, 0x2 }, + { 0x22002e, 0x2 }, + + { 0x90204, 0x0 }, + { 0x190204, 0x0 }, + { 0x290204, 0x0 }, + +#ifdef WR_POST_EXT_3200 + { 0x20024, 0xeb }, +#else + { 0x20024, 0xab }, +#endif + { 0x2003a, 0x0 }, + { 0x120024, 0xab }, + { 0x2003a, 0x0 }, + { 0x220024, 0xab }, + { 0x2003a, 0x0 }, + { 0x20056, 0x3 }, + { 0x120056, 0xa }, + { 0x220056, 0xa }, + { 0x1004d, 0xe00 }, + { 0x1014d, 0xe00 }, + { 0x1104d, 0xe00 }, + { 0x1114d, 0xe00 }, + { 0x1204d, 0xe00 }, + { 0x1214d, 0xe00 }, + { 0x1304d, 0xe00 }, + { 0x1314d, 0xe00 }, + { 0x11004d, 0xe00 }, + { 0x11014d, 0xe00 }, + { 0x11104d, 0xe00 }, + { 0x11114d, 0xe00 }, + { 0x11204d, 0xe00 }, + { 0x11214d, 0xe00 }, + { 0x11304d, 0xe00 }, + { 0x11314d, 0xe00 }, + { 0x21004d, 0xe00 }, + { 0x21014d, 0xe00 }, + { 0x21104d, 0xe00 }, + { 0x21114d, 0xe00 }, + { 0x21204d, 0xe00 }, + { 0x21214d, 0xe00 }, + { 0x21304d, 0xe00 }, + { 0x21314d, 0xe00 }, + + { 0x10049, 0xfbe }, + { 0x10149, 0xfbe }, + { 0x11049, 0xfbe }, + { 0x11149, 0xfbe }, + { 0x12049, 0xfbe }, + { 0x12149, 0xfbe }, + { 0x13049, 0xfbe }, + { 0x13149, 0xfbe }, + { 0x110049, 0xfbe }, + { 0x110149, 0xfbe }, + { 0x111049, 0xfbe }, + { 0x111149, 0xfbe }, + { 0x112049, 0xfbe }, + { 0x112149, 0xfbe }, + { 0x113049, 0xfbe }, + { 0x113149, 0xfbe }, + { 0x210049, 0xfbe }, + { 0x210149, 0xfbe }, + { 0x211049, 0xfbe }, + { 0x211149, 0xfbe }, + { 0x212049, 0xfbe }, + { 0x212149, 0xfbe }, + { 0x213049, 0xfbe }, + { 0x213149, 0xfbe }, + + { 0x43, ((LPDDR4_PHY_ADDR_RON << 5) | LPDDR4_PHY_ADDR_RON) }, + { 0x1043, ((LPDDR4_PHY_ADDR_RON << 5) | LPDDR4_PHY_ADDR_RON) }, + { 0x2043, ((LPDDR4_PHY_ADDR_RON << 5) | LPDDR4_PHY_ADDR_RON) }, + { 0x3043, ((LPDDR4_PHY_ADDR_RON << 5) | LPDDR4_PHY_ADDR_RON) }, + { 0x4043, ((LPDDR4_PHY_ADDR_RON << 5) | LPDDR4_PHY_ADDR_RON) }, + { 0x5043, ((LPDDR4_PHY_ADDR_RON << 5) | LPDDR4_PHY_ADDR_RON) }, + { 0x6043, ((LPDDR4_PHY_ADDR_RON << 5) | LPDDR4_PHY_ADDR_RON) }, + { 0x7043, ((LPDDR4_PHY_ADDR_RON << 5) | LPDDR4_PHY_ADDR_RON) }, + { 0x8043, ((LPDDR4_PHY_ADDR_RON << 5) | LPDDR4_PHY_ADDR_RON) }, + { 0x9043, ((LPDDR4_PHY_ADDR_RON << 5) | LPDDR4_PHY_ADDR_RON) }, + + { 0x20018, 0x3 }, + { 0x20075, 0x4 }, + { 0x20050, 0x0 }, + { 0x20008, 0x320 }, + { 0x120008, 0x64 }, + { 0x220008, 0x19 }, + { 0x20088, 0x9 }, + { 0x200b2, 0x104 }, + { 0x10043, 0x5a1 }, + { 0x10143, 0x5a1 }, + { 0x11043, 0x5a1 }, + { 0x11143, 0x5a1 }, + { 0x12043, 0x5a1 }, + { 0x12143, 0x5a1 }, + { 0x13043, 0x5a1 }, + { 0x13143, 0x5a1 }, + { 0x1200b2, 0x104 }, + { 0x110043, 0x5a1 }, + { 0x110143, 0x5a1 }, + { 0x111043, 0x5a1 }, + { 0x111143, 0x5a1 }, + { 0x112043, 0x5a1 }, + { 0x112143, 0x5a1 }, + { 0x113043, 0x5a1 }, + { 0x113143, 0x5a1 }, + { 0x2200b2, 0x104 }, + { 0x210043, 0x5a1 }, + { 0x210143, 0x5a1 }, + { 0x211043, 0x5a1 }, + { 0x211143, 0x5a1 }, + { 0x212043, 0x5a1 }, + { 0x212143, 0x5a1 }, + { 0x213043, 0x5a1 }, + { 0x213143, 0x5a1 }, + { 0x200fa, 0x1 }, + { 0x1200fa, 0x1 }, + { 0x2200fa, 0x1 }, + { 0x20019, 0x1 }, + { 0x120019, 0x1 }, + { 0x220019, 0x1 }, + { 0x200f0, 0x660 }, + { 0x200f1, 0x0 }, + { 0x200f2, 0x4444 }, + { 0x200f3, 0x8888 }, + { 0x200f4, 0x5665 }, + { 0x200f5, 0x0 }, + { 0x200f6, 0x0 }, + { 0x200f7, 0xf000 }, + { 0x20025, 0x0 }, + { 0x2002d, 0x0 }, + { 0x12002d, 0x0 }, + { 0x22002d, 0x0 }, + + { 0x200c7, 0x80 }, + { 0x1200c7, 0x80 }, + { 0x2200c7, 0x80 }, + { 0x200ca, 0x106 }, + { 0x1200ca, 0x106 }, + { 0x2200ca, 0x106 }, +}; + +/* P0 message block paremeter for training firmware */ +struct dram_cfg_param lpddr4_fsp0_cfg[] = { + { 0xd0000, 0x0 }, + { 0x54000, 0x0 }, + { 0x54001, 0x0 }, + { 0x54002, 0x0 }, + { 0x54003, 0xc80 }, + { 0x54004, 0x2 }, + { 0x54005, ((LPDDR4_PHY_RON << 8) | LPDDR4_PHY_RTT) }, /* PHY Ron/Rtt */ + { 0x54006, LPDDR4_PHY_VREF_VALUE }, + { 0x54007, 0x0 }, + { 0x54008, 0x131f }, + { 0x54009, LPDDR4_HDT_CTL_3200_1D }, + { 0x5400a, 0x0 }, + { 0x5400b, 0x2 }, + { 0x5400c, 0x0 }, + { 0x5400d, (LPDDR4_CATRAIN_3200_1d << 8) }, + { 0x5400e, 0x0 }, + { 0x5400f, 0x0 }, + { 0x54010, 0x0 }, + { 0x54011, 0x0 }, + { 0x54012, 0x310 }, + { 0x54013, 0x0 }, + { 0x54014, 0x0 }, + { 0x54015, 0x0 }, + { 0x54016, 0x0 }, + { 0x54017, 0x0 }, + { 0x54018, 0x0 }, + + { 0x54019, 0x2dd4 }, +#ifdef WR_POST_EXT_3200 + { 0x5401a, (((LPDDR4_RON) << 3) | 0x3) }, +#else + { 0x5401a, (((LPDDR4_RON) << 3) | 0x1) }, +#endif + { 0x5401b, ((LPDDR4_VREF_VALUE_CA << 8) | + (LPDDR4_RTT_CA_BANK0 << 4) | LPDDR4_RTT_DQ) }, + { 0x5401c, ((LPDDR4_VREF_VALUE_DQ_RANK0 << 8) | 0x08) }, + { 0x5401d, 0x0 }, + { 0x5401e, LPDDR4_MR22_RANK0 }, + { 0x5401f, 0x2dd4 }, +#ifdef WR_POST_EXT_3200 + { 0x54020, (((LPDDR4_RON) << 3) | 0x3) }, +#else + { 0x54020, (((LPDDR4_RON) << 3) | 0x1) }, +#endif + { 0x54021, ((LPDDR4_VREF_VALUE_CA << 8) | + (LPDDR4_RTT_CA_BANK1 << 4) | LPDDR4_RTT_DQ) }, + { 0x54022, ((LPDDR4_VREF_VALUE_DQ_RANK1 << 8) | 0x08) }, + { 0x54023, 0x0 }, + { 0x54024, LPDDR4_MR22_RANK1 }, + + { 0x54025, 0x0 }, + { 0x54026, 0x0 }, + { 0x54027, 0x0 }, + { 0x54028, 0x0 }, + { 0x54029, 0x0 }, + { 0x5402a, 0x0 }, + { 0x5402b, 0x1000 }, + { 0x5402c, 0x3 }, + { 0x5402d, 0x0 }, + { 0x5402e, 0x0 }, + { 0x5402f, 0x0 }, + { 0x54030, 0x0 }, + { 0x54031, 0x0 }, + { 0x54032, 0xd400 }, + /* MR3/MR2 */ +#ifdef WR_POST_EXT_3200 + { 0x54033, ((((LPDDR4_RON) << 3) | 0x3) << 8) | 0x2d /*0x312d*/ }, +#else + { 0x54033, ((((LPDDR4_RON) << 3) | 0x1) << 8) | 0x2d/*0x312d*/ }, +#endif + /* MR11/MR4 */ + { 0x54034, (((LPDDR4_RTT_CA_BANK0 << 4) | LPDDR4_RTT_DQ) << 8) }, + /* self:0x284d//MR13/MR12 */ + { 0x54035, (0x0800 | LPDDR4_VREF_VALUE_CA)/*0x084d*/ }, + /* MR16/MR14*/ + { 0x54036, LPDDR4_VREF_VALUE_DQ_RANK0/*0x4d*/ }, + { 0x54037, (LPDDR4_MR22_RANK0 << 8)/*0x500*/ }, + /* MR1 */ + { 0x54038, 0xd400 }, + /* MR3/MR2 */ +#ifdef WR_POST_EXT_3200 + { 0x54039, ((((LPDDR4_RON) << 3) | 0x3) << 8) | 0x2d/*0x312d*/ }, +#else + { 0x54039, ((((LPDDR4_RON) << 3) | 0x1) << 8) | 0x2d/*0x312d*/ }, +#endif + /* MR11/MR4 */ + { 0x5403a, (((LPDDR4_RTT_CA_BANK1 << 4) | LPDDR4_RTT_DQ) << 8) }, + /* self:0x284d//MR13/MR12 */ + { 0x5403b, (0x0800 | LPDDR4_VREF_VALUE_CA)/*0x084d*/ }, + /* MR16/MR14 */ + { 0x5403c, LPDDR4_VREF_VALUE_DQ_RANK1/*0x4d*/ }, + { 0x5403d, (LPDDR4_MR22_RANK1 << 8)/*0x500*/ }, + /* { 0x5403d, 0x500 } */ + { 0x5403d, (LPDDR4_MR22_RANK1 << 8)/*0x500*/ }, + { 0x5403e, 0x0 }, + { 0x5403f, 0x0 }, + { 0x54040, 0x0 }, + { 0x54041, 0x0 }, + { 0x54042, 0x0 }, + { 0x54043, 0x0 }, + { 0x54044, 0x0 }, + { 0xd0000, 0x1 }, +}; + +/* P1 message block paremeter for training firmware */ +struct dram_cfg_param lpddr4_fsp1_cfg[] = { + { 0xd0000, 0x0 }, + { 0x54000, 0x0 }, + { 0x54001, 0x0 }, + { 0x54002, 0x101 }, + { 0x54003, 0x190 }, + { 0x54004, 0x2 }, + /* PHY Ron/Rtt */ + { 0x54005, ((LPDDR4_PHY_RON << 8) | LPDDR4_PHY_RTT)/*0x2828*/ }, + { 0x54006, LPDDR4_PHY_VREF_VALUE }, + { 0x54007, 0x0 }, + { 0x54008, LPDDR4_TRAIN_SEQ_400 }, + { 0x54009, LPDDR4_HDT_CTL_400_1D }, + { 0x5400a, 0x0 }, + { 0x5400b, 0x2 }, + { 0x5400c, 0x0 }, + { 0x5400d, (LPDDR4_CATRAIN_400 << 8) }, + { 0x5400e, 0x0 }, + { 0x5400f, 0x0 }, + { 0x54010, 0x0 }, + { 0x54011, 0x0 }, + { 0x54012, 0x310 }, + { 0x54013, 0x0 }, + { 0x54014, 0x0 }, + { 0x54015, 0x0 }, + { 0x54016, 0x0 }, + { 0x54017, 0x0 }, + { 0x54018, 0x0 }, + { 0x54019, 0x84 }, + /* MR4/MR3 */ + { 0x5401a, (((LPDDR4_RON) << 3) | 0x1)/*0x31*/ }, + /* MR12/MR11 */ + { 0x5401b, ((LPDDR4_VREF_VALUE_CA << 8) | (LPDDR4_RTT_CA << 4) | + LPDDR4_RTT_DQ)/*0x4d46*/ }, + /* self:0x4d28//MR14/MR13 */ + { 0x5401c, ((LPDDR4_VREF_VALUE_DQ_RANK0 << 8) | 0x08)/*0x4d08*/ }, + { 0x5401d, 0x0 }, + { 0x5401e, LPDDR4_MR22_RANK0/*0x5*/ }, + { 0x5401f, 0x84 }, + { 0x54020, (((LPDDR4_RON) << 3) | 0x1)/*0x31*/ }, /* MR4/MR3 */ + { 0x54021, ((LPDDR4_VREF_VALUE_CA << 8) | (LPDDR4_RTT_CA << 4) | + LPDDR4_RTT_DQ)/*0x4d46*/ },/* MR12/MR11 */ + /* self:0x4d28//MR14/MR13 */ + { 0x54022, ((LPDDR4_VREF_VALUE_DQ_RANK1 << 8) | 0x08)/*0x4d08*/ }, + { 0x54023, 0x0 }, + { 0x54024, LPDDR4_MR22_RANK1 }, + { 0x54025, 0x0 }, + { 0x54026, 0x0 }, + { 0x54027, 0x0 }, + { 0x54028, 0x0 }, + { 0x54029, 0x0 }, + { 0x5402a, 0x0 }, + { 0x5402b, 0x1000 }, + { 0x5402c, 0x3 }, + { 0x5402d, 0x0 }, + { 0x5402e, 0x0 }, + { 0x5402f, 0x0 }, + { 0x54030, 0x0 }, + { 0x54031, 0x0 }, + { 0x54032, 0x8400 }, + { 0x54033, ((((LPDDR4_RON) << 3) | 0x1) << 8) | 0x00 }, + { 0x54034, (((LPDDR4_RTT_CA << 4) | LPDDR4_RTT_DQ) << 8) }, + { 0x54035, (0x0800 | LPDDR4_VREF_VALUE_CA) }, + { 0x54036, LPDDR4_VREF_VALUE_DQ_RANK0 }, + { 0x54037, (LPDDR4_MR22_RANK0 << 8) }, + { 0x54038, 0x8400 }, + { 0x54039, ((((LPDDR4_RON) << 3) | 0x1) << 8) | 0x00 }, + { 0x5403a, (((LPDDR4_RTT_CA << 4) | LPDDR4_RTT_DQ) << 8) }, + { 0x5403b, (0x0800 | LPDDR4_VREF_VALUE_CA) }, + { 0x5403c, LPDDR4_VREF_VALUE_DQ_RANK1 }, + { 0x5403d, (LPDDR4_MR22_RANK1 << 8) }, + { 0x5403e, 0x0 }, + { 0x5403f, 0x0 }, + { 0x54040, 0x0 }, + { 0x54041, 0x0 }, + { 0x54042, 0x0 }, + { 0x54043, 0x0 }, + { 0x54044, 0x0 }, + { 0xd0000, 0x1 }, +}; + +/* P2 message block paremeter for training firmware */ +struct dram_cfg_param lpddr4_fsp2_cfg[] = { + { 0xd0000, 0x0 }, + { 0x54000, 0x0 }, + { 0x54001, 0x0 }, + { 0x54002, 0x102 }, + { 0x54003, 0x64 }, + { 0x54004, 0x2 }, + { 0x54005, ((LPDDR4_PHY_RON << 8) | LPDDR4_PHY_RTT) }, + { 0x54006, LPDDR4_PHY_VREF_VALUE }, + { 0x54007, 0x0 }, + { 0x54008, LPDDR4_TRAIN_SEQ_100 }, + { 0x54009, LPDDR4_HDT_CTL_100_1D }, + { 0x5400a, 0x0 }, + { 0x5400b, 0x2 }, + { 0x5400c, 0x0 }, + { 0x5400d, (LPDDR4_CATRAIN_100 << 8) }, + { 0x5400e, 0x0 }, + { 0x5400f, 0x0 }, + { 0x54010, 0x0 }, + { 0x54011, 0x0 }, + { 0x54012, 0x310 }, + { 0x54013, 0x0 }, + { 0x54014, 0x0 }, + { 0x54015, 0x0 }, + { 0x54016, 0x0 }, + { 0x54017, 0x0 }, + { 0x54018, 0x0 }, + { 0x54019, 0x84 }, + { 0x5401a, (((LPDDR4_RON) << 3) | 0x1) }, + { 0x5401b, ((LPDDR4_VREF_VALUE_CA << 8) | (LPDDR4_RTT_CA << 4) | + LPDDR4_RTT_DQ) }, + { 0x5401c, ((LPDDR4_VREF_VALUE_DQ_RANK0 << 8) | 0x08) }, + { 0x5401d, 0x0 }, + { 0x5401e, LPDDR4_MR22_RANK0 }, + { 0x5401f, 0x84 }, + { 0x54020, (((LPDDR4_RON) << 3) | 0x1) }, + { 0x54021, ((LPDDR4_VREF_VALUE_CA << 8) | (LPDDR4_RTT_CA << 4) | + LPDDR4_RTT_DQ) }, + { 0x54022, ((LPDDR4_VREF_VALUE_DQ_RANK1 << 8) | 0x08) }, + { 0x54023, 0x0 }, + { 0x54024, LPDDR4_MR22_RANK1 }, + { 0x54025, 0x0 }, + { 0x54026, 0x0 }, + { 0x54027, 0x0 }, + { 0x54028, 0x0 }, + { 0x54029, 0x0 }, + { 0x5402a, 0x0 }, + { 0x5402b, 0x1000 }, + { 0x5402c, 0x3 }, + { 0x5402d, 0x0 }, + { 0x5402e, 0x0 }, + { 0x5402f, 0x0 }, + { 0x54030, 0x0 }, + { 0x54031, 0x0 }, + { 0x54032, 0x8400 }, + { 0x54033, ((((LPDDR4_RON) << 3) | 0x1) << 8) | 0x00 }, + { 0x54034, (((LPDDR4_RTT_CA << 4) | LPDDR4_RTT_DQ) << 8) }, + { 0x54035, (0x0800 | LPDDR4_VREF_VALUE_CA) }, + { 0x54036, LPDDR4_VREF_VALUE_DQ_RANK0 }, + { 0x54037, (LPDDR4_MR22_RANK0 << 8) }, + { 0x54038, 0x8400 }, + { 0x54039, ((((LPDDR4_RON) << 3) | 0x1) << 8) | 0x00 }, + { 0x5403a, (((LPDDR4_RTT_CA << 4) | LPDDR4_RTT_DQ) << 8) }, + { 0x5403b, (0x0800 | LPDDR4_VREF_VALUE_CA) }, + { 0x5403c, LPDDR4_VREF_VALUE_DQ_RANK1 }, + { 0x5403d, (LPDDR4_MR22_RANK1 << 8) }, + { 0x5403e, 0x0 }, + { 0x5403f, 0x0 }, + { 0x54040, 0x0 }, + { 0x54041, 0x0 }, + { 0x54042, 0x0 }, + { 0x54043, 0x0 }, + { 0x54044, 0x0 }, + { 0xd0000, 0x1 }, +}; + +/* P0 2D message block paremeter for training firmware */ +struct dram_cfg_param lpddr4_fsp0_2d_cfg[] = { + { 0xd0000, 0x0 }, + { 0x54000, 0x0 }, + { 0x54001, 0x0 }, + { 0x54002, 0x0 }, + { 0x54003, 0xc80 }, + { 0x54004, 0x2 }, + { 0x54005, ((LPDDR4_PHY_RON << 8) | LPDDR4_PHY_RTT) }, + { 0x54006, LPDDR4_PHY_VREF_VALUE }, + { 0x54007, 0x0 }, + { 0x54008, 0x61 }, + { 0x54009, LPDDR4_HDT_CTL_2D }, + { 0x5400a, 0x0 }, + { 0x5400b, 0x2 }, + { 0x5400c, 0x0 }, + { 0x5400d, (LPDDR4_CATRAIN_3200_2d << 8) }, + { 0x5400e, 0x0 }, + { 0x5400f, (LPDDR4_2D_SHARE << 8) | 0x00 }, + { 0x54010, LPDDR4_2D_WEIGHT }, + { 0x54011, 0x0 }, + { 0x54012, 0x310 }, + { 0x54013, 0x0 }, + { 0x54014, 0x0 }, + { 0x54015, 0x0 }, + { 0x54016, 0x0 }, + { 0x54017, 0x0 }, + { 0x54018, 0x0 }, + { 0x54019, 0x2dd4 }, +#ifdef WR_POST_EXT_3200 + { 0x5401a, (((LPDDR4_RON) << 3) | 0x3) }, +#else + { 0x5401a, (((LPDDR4_RON) << 3) | 0x1) }, +#endif + { 0x5401b, ((LPDDR4_VREF_VALUE_CA << 8) | + (LPDDR4_RTT_CA_BANK0 << 4) | LPDDR4_RTT_DQ) }, + { 0x5401c, ((LPDDR4_VREF_VALUE_DQ_RANK0 << 8) | 0x08) }, + { 0x5401d, 0x0 }, + { 0x5401e, LPDDR4_MR22_RANK0 }, + { 0x5401f, 0x2dd4 }, +#ifdef WR_POST_EXT_3200 + { 0x54020, (((LPDDR4_RON) << 3) | 0x3) }, +#else + { 0x54020, (((LPDDR4_RON) << 3) | 0x1) }, +#endif + { 0x54021, ((LPDDR4_VREF_VALUE_CA << 8) | + (LPDDR4_RTT_CA_BANK1 << 4) | LPDDR4_RTT_DQ) }, + { 0x54022, ((LPDDR4_VREF_VALUE_DQ_RANK1 << 8) | 0x08) }, + { 0x54023, 0x0 }, + { 0x54024, LPDDR4_MR22_RANK1 }, + { 0x54025, 0x0 }, + { 0x54026, 0x0 }, + { 0x54027, 0x0 }, + { 0x54028, 0x0 }, + { 0x54029, 0x0 }, + { 0x5402a, 0x0 }, + { 0x5402b, 0x1000 }, + { 0x5402c, 0x3 }, + { 0x5402d, 0x0 }, + { 0x5402e, 0x0 }, + { 0x5402f, 0x0 }, + { 0x54030, 0x0 }, + { 0x54031, 0x0 }, + + { 0x54032, 0xd400 }, +#ifdef WR_POST_EXT_3200 + { 0x54033, ((((LPDDR4_RON) << 3) | 0x3) << 8) | 0x2d }, +#else + { 0x54033, ((((LPDDR4_RON) << 3) | 0x1) << 8) | 0x2d }, +#endif + { 0x54034, (((LPDDR4_RTT_CA_BANK0 << 4) | LPDDR4_RTT_DQ) << 8) }, + { 0x54035, (0x0800 | LPDDR4_VREF_VALUE_CA) }, + { 0x54036, LPDDR4_VREF_VALUE_DQ_RANK0 }, + { 0x54037, (LPDDR4_MR22_RANK0 << 8) }, + { 0x54038, 0xd400 }, +#ifdef WR_POST_EXT_3200 + { 0x54039, ((((LPDDR4_RON) << 3) | 0x3) << 8) | 0x2d }, +#else + { 0x54039, ((((LPDDR4_RON) << 3) | 0x1) << 8) | 0x2d }, +#endif + { 0x5403a, (((LPDDR4_RTT_CA_BANK1 << 4) | LPDDR4_RTT_DQ) << 8) }, + { 0x5403b, (0x0800 | LPDDR4_VREF_VALUE_CA) }, + { 0x5403c, LPDDR4_VREF_VALUE_DQ_RANK1 }, + { 0x5403d, (LPDDR4_MR22_RANK1 << 8) }, + { 0x5403e, 0x0 }, + { 0x5403f, 0x0 }, + { 0x54040, 0x0 }, + { 0x54041, 0x0 }, + { 0x54042, 0x0 }, + { 0x54043, 0x0 }, + { 0x54044, 0x0 }, + { 0xd0000, 0x1 }, +}; + +/* DRAM PHY init engine image */ +struct dram_cfg_param lpddr4_phy_pie[] = { + { 0xd0000, 0x0 }, + { 0x90000, 0x10 }, + { 0x90001, 0x400 }, + { 0x90002, 0x10e }, + { 0x90003, 0x0 }, + { 0x90004, 0x0 }, + { 0x90005, 0x8 }, + { 0x90029, 0xb }, + { 0x9002a, 0x480 }, + { 0x9002b, 0x109 }, + { 0x9002c, 0x8 }, + { 0x9002d, 0x448 }, + { 0x9002e, 0x139 }, + { 0x9002f, 0x8 }, + { 0x90030, 0x478 }, + { 0x90031, 0x109 }, + { 0x90032, 0x0 }, + { 0x90033, 0xe8 }, + { 0x90034, 0x109 }, + { 0x90035, 0x2 }, + { 0x90036, 0x10 }, + { 0x90037, 0x139 }, + { 0x90038, 0xf }, + { 0x90039, 0x7c0 }, + { 0x9003a, 0x139 }, + { 0x9003b, 0x44 }, + { 0x9003c, 0x630 }, + { 0x9003d, 0x159 }, + { 0x9003e, 0x14f }, + { 0x9003f, 0x630 }, + { 0x90040, 0x159 }, + { 0x90041, 0x47 }, + { 0x90042, 0x630 }, + { 0x90043, 0x149 }, + { 0x90044, 0x4f }, + { 0x90045, 0x630 }, + { 0x90046, 0x179 }, + { 0x90047, 0x8 }, + { 0x90048, 0xe0 }, + { 0x90049, 0x109 }, + { 0x9004a, 0x0 }, + { 0x9004b, 0x7c8 }, + { 0x9004c, 0x109 }, + { 0x9004d, 0x0 }, + { 0x9004e, 0x1 }, + { 0x9004f, 0x8 }, + { 0x90050, 0x0 }, + { 0x90051, 0x45a }, + { 0x90052, 0x9 }, + { 0x90053, 0x0 }, + { 0x90054, 0x448 }, + { 0x90055, 0x109 }, + { 0x90056, 0x40 }, + { 0x90057, 0x630 }, + { 0x90058, 0x179 }, + { 0x90059, 0x1 }, + { 0x9005a, 0x618 }, + { 0x9005b, 0x109 }, + { 0x9005c, 0x40c0 }, + { 0x9005d, 0x630 }, + { 0x9005e, 0x149 }, + { 0x9005f, 0x8 }, + { 0x90060, 0x4 }, + { 0x90061, 0x48 }, + { 0x90062, 0x4040 }, + { 0x90063, 0x630 }, + { 0x90064, 0x149 }, + { 0x90065, 0x0 }, + { 0x90066, 0x4 }, + { 0x90067, 0x48 }, + { 0x90068, 0x40 }, + { 0x90069, 0x630 }, + { 0x9006a, 0x149 }, + { 0x9006b, 0x10 }, + { 0x9006c, 0x4 }, + { 0x9006d, 0x18 }, + { 0x9006e, 0x0 }, + { 0x9006f, 0x4 }, + { 0x90070, 0x78 }, + { 0x90071, 0x549 }, + { 0x90072, 0x630 }, + { 0x90073, 0x159 }, + { 0x90074, 0xd49 }, + { 0x90075, 0x630 }, + { 0x90076, 0x159 }, + { 0x90077, 0x94a }, + { 0x90078, 0x630 }, + { 0x90079, 0x159 }, + { 0x9007a, 0x441 }, + { 0x9007b, 0x630 }, + { 0x9007c, 0x149 }, + { 0x9007d, 0x42 }, + { 0x9007e, 0x630 }, + { 0x9007f, 0x149 }, + { 0x90080, 0x1 }, + { 0x90081, 0x630 }, + { 0x90082, 0x149 }, + { 0x90083, 0x0 }, + { 0x90084, 0xe0 }, + { 0x90085, 0x109 }, + { 0x90086, 0xa }, + { 0x90087, 0x10 }, + { 0x90088, 0x109 }, + { 0x90089, 0x9 }, + { 0x9008a, 0x3c0 }, + { 0x9008b, 0x149 }, + { 0x9008c, 0x9 }, + { 0x9008d, 0x3c0 }, + { 0x9008e, 0x159 }, + { 0x9008f, 0x18 }, + { 0x90090, 0x10 }, + { 0x90091, 0x109 }, + { 0x90092, 0x0 }, + { 0x90093, 0x3c0 }, + { 0x90094, 0x109 }, + { 0x90095, 0x18 }, + { 0x90096, 0x4 }, + { 0x90097, 0x48 }, + { 0x90098, 0x18 }, + { 0x90099, 0x4 }, + { 0x9009a, 0x58 }, + { 0x9009b, 0xa }, + { 0x9009c, 0x10 }, + { 0x9009d, 0x109 }, + { 0x9009e, 0x2 }, + { 0x9009f, 0x10 }, + { 0x900a0, 0x109 }, + { 0x900a1, 0x5 }, + { 0x900a2, 0x7c0 }, + { 0x900a3, 0x109 }, + { 0x900a4, 0x10 }, + { 0x900a5, 0x10 }, + { 0x900a6, 0x109 }, + { 0x40000, 0x811 }, + { 0x40020, 0x880 }, + { 0x40040, 0x0 }, + { 0x40060, 0x0 }, + { 0x40001, 0x4008 }, + { 0x40021, 0x83 }, + { 0x40041, 0x4f }, + { 0x40061, 0x0 }, + { 0x40002, 0x4040 }, + { 0x40022, 0x83 }, + { 0x40042, 0x51 }, + { 0x40062, 0x0 }, + { 0x40003, 0x811 }, + { 0x40023, 0x880 }, + { 0x40043, 0x0 }, + { 0x40063, 0x0 }, + { 0x40004, 0x720 }, + { 0x40024, 0xf }, + { 0x40044, 0x1740 }, + { 0x40064, 0x0 }, + { 0x40005, 0x16 }, + { 0x40025, 0x83 }, + { 0x40045, 0x4b }, + { 0x40065, 0x0 }, + { 0x40006, 0x716 }, + { 0x40026, 0xf }, + { 0x40046, 0x2001 }, + { 0x40066, 0x0 }, + { 0x40007, 0x716 }, + { 0x40027, 0xf }, + { 0x40047, 0x2800 }, + { 0x40067, 0x0 }, + { 0x40008, 0x716 }, + { 0x40028, 0xf }, + { 0x40048, 0xf00 }, + { 0x40068, 0x0 }, + { 0x40009, 0x720 }, + { 0x40029, 0xf }, + { 0x40049, 0x1400 }, + { 0x40069, 0x0 }, + { 0x4000a, 0xe08 }, + { 0x4002a, 0xc15 }, + { 0x4004a, 0x0 }, + { 0x4006a, 0x0 }, + { 0x4000b, 0x623 }, + { 0x4002b, 0x15 }, + { 0x4004b, 0x0 }, + { 0x4006b, 0x0 }, + { 0x4000c, 0x4028 }, + { 0x4002c, 0x80 }, + { 0x4004c, 0x0 }, + { 0x4006c, 0x0 }, + { 0x4000d, 0xe08 }, + { 0x4002d, 0xc1a }, + { 0x4004d, 0x0 }, + { 0x4006d, 0x0 }, + { 0x4000e, 0x623 }, + { 0x4002e, 0x1a }, + { 0x4004e, 0x0 }, + { 0x4006e, 0x0 }, + { 0x4000f, 0x4040 }, + { 0x4002f, 0x80 }, + { 0x4004f, 0x0 }, + { 0x4006f, 0x0 }, + { 0x40010, 0x2604 }, + { 0x40030, 0x15 }, + { 0x40050, 0x0 }, + { 0x40070, 0x0 }, + { 0x40011, 0x708 }, + { 0x40031, 0x5 }, + { 0x40051, 0x0 }, + { 0x40071, 0x2002 }, + { 0x40012, 0x8 }, + { 0x40032, 0x80 }, + { 0x40052, 0x0 }, + { 0x40072, 0x0 }, + { 0x40013, 0x2604 }, + { 0x40033, 0x1a }, + { 0x40053, 0x0 }, + { 0x40073, 0x0 }, + { 0x40014, 0x708 }, + { 0x40034, 0xa }, + { 0x40054, 0x0 }, + { 0x40074, 0x2002 }, + { 0x40015, 0x4040 }, + { 0x40035, 0x80 }, + { 0x40055, 0x0 }, + { 0x40075, 0x0 }, + { 0x40016, 0x60a }, + { 0x40036, 0x15 }, + { 0x40056, 0x1200 }, + { 0x40076, 0x0 }, + { 0x40017, 0x61a }, + { 0x40037, 0x15 }, + { 0x40057, 0x1300 }, + { 0x40077, 0x0 }, + { 0x40018, 0x60a }, + { 0x40038, 0x1a }, + { 0x40058, 0x1200 }, + { 0x40078, 0x0 }, + { 0x40019, 0x642 }, + { 0x40039, 0x1a }, + { 0x40059, 0x1300 }, + { 0x40079, 0x0 }, + { 0x4001a, 0x4808 }, + { 0x4003a, 0x880 }, + { 0x4005a, 0x0 }, + { 0x4007a, 0x0 }, + { 0x900a7, 0x0 }, + { 0x900a8, 0x790 }, + { 0x900a9, 0x11a }, + { 0x900aa, 0x8 }, + { 0x900ab, 0x7aa }, + { 0x900ac, 0x2a }, + { 0x900ad, 0x10 }, + { 0x900ae, 0x7b2 }, + { 0x900af, 0x2a }, + { 0x900b0, 0x0 }, + { 0x900b1, 0x7c8 }, + { 0x900b2, 0x109 }, + { 0x900b3, 0x10 }, + { 0x900b4, 0x2a8 }, + { 0x900b5, 0x129 }, + { 0x900b6, 0x8 }, + { 0x900b7, 0x370 }, + { 0x900b8, 0x129 }, + { 0x900b9, 0xa }, + { 0x900ba, 0x3c8 }, + { 0x900bb, 0x1a9 }, + { 0x900bc, 0xc }, + { 0x900bd, 0x408 }, + { 0x900be, 0x199 }, + { 0x900bf, 0x14 }, + { 0x900c0, 0x790 }, + { 0x900c1, 0x11a }, + { 0x900c2, 0x8 }, + { 0x900c3, 0x4 }, + { 0x900c4, 0x18 }, + { 0x900c5, 0xe }, + { 0x900c6, 0x408 }, + { 0x900c7, 0x199 }, + { 0x900c8, 0x8 }, + { 0x900c9, 0x8568 }, + { 0x900ca, 0x108 }, + { 0x900cb, 0x18 }, + { 0x900cc, 0x790 }, + { 0x900cd, 0x16a }, + { 0x900ce, 0x8 }, + { 0x900cf, 0x1d8 }, + { 0x900d0, 0x169 }, + { 0x900d1, 0x10 }, + { 0x900d2, 0x8558 }, + { 0x900d3, 0x168 }, + { 0x900d4, 0x70 }, + { 0x900d5, 0x788 }, + { 0x900d6, 0x16a }, + { 0x900d7, 0x1ff8 }, + { 0x900d8, 0x85a8 }, + { 0x900d9, 0x1e8 }, + { 0x900da, 0x50 }, + { 0x900db, 0x798 }, + { 0x900dc, 0x16a }, + { 0x900dd, 0x60 }, + { 0x900de, 0x7a0 }, + { 0x900df, 0x16a }, + { 0x900e0, 0x8 }, + { 0x900e1, 0x8310 }, + { 0x900e2, 0x168 }, + { 0x900e3, 0x8 }, + { 0x900e4, 0xa310 }, + { 0x900e5, 0x168 }, + { 0x900e6, 0xa }, + { 0x900e7, 0x408 }, + { 0x900e8, 0x169 }, + { 0x900e9, 0x6e }, + { 0x900ea, 0x0 }, + { 0x900eb, 0x68 }, + { 0x900ec, 0x0 }, + { 0x900ed, 0x408 }, + { 0x900ee, 0x169 }, + { 0x900ef, 0x0 }, + { 0x900f0, 0x8310 }, + { 0x900f1, 0x168 }, + { 0x900f2, 0x0 }, + { 0x900f3, 0xa310 }, + { 0x900f4, 0x168 }, + { 0x900f5, 0x1ff8 }, + { 0x900f6, 0x85a8 }, + { 0x900f7, 0x1e8 }, + { 0x900f8, 0x68 }, + { 0x900f9, 0x798 }, + { 0x900fa, 0x16a }, + { 0x900fb, 0x78 }, + { 0x900fc, 0x7a0 }, + { 0x900fd, 0x16a }, + { 0x900fe, 0x68 }, + { 0x900ff, 0x790 }, + { 0x90100, 0x16a }, + { 0x90101, 0x8 }, + { 0x90102, 0x8b10 }, + { 0x90103, 0x168 }, + { 0x90104, 0x8 }, + { 0x90105, 0xab10 }, + { 0x90106, 0x168 }, + { 0x90107, 0xa }, + { 0x90108, 0x408 }, + { 0x90109, 0x169 }, + { 0x9010a, 0x58 }, + { 0x9010b, 0x0 }, + { 0x9010c, 0x68 }, + { 0x9010d, 0x0 }, + { 0x9010e, 0x408 }, + { 0x9010f, 0x169 }, + { 0x90110, 0x0 }, + { 0x90111, 0x8b10 }, + { 0x90112, 0x168 }, + { 0x90113, 0x0 }, + { 0x90114, 0xab10 }, + { 0x90115, 0x168 }, + { 0x90116, 0x0 }, + { 0x90117, 0x1d8 }, + { 0x90118, 0x169 }, + { 0x90119, 0x80 }, + { 0x9011a, 0x790 }, + { 0x9011b, 0x16a }, + { 0x9011c, 0x18 }, + { 0x9011d, 0x7aa }, + { 0x9011e, 0x6a }, + { 0x9011f, 0xa }, + { 0x90120, 0x0 }, + { 0x90121, 0x1e9 }, + { 0x90122, 0x8 }, + { 0x90123, 0x8080 }, + { 0x90124, 0x108 }, + { 0x90125, 0xf }, + { 0x90126, 0x408 }, + { 0x90127, 0x169 }, + { 0x90128, 0xc }, + { 0x90129, 0x0 }, + { 0x9012a, 0x68 }, + { 0x9012b, 0x9 }, + { 0x9012c, 0x0 }, + { 0x9012d, 0x1a9 }, + { 0x9012e, 0x0 }, + { 0x9012f, 0x408 }, + { 0x90130, 0x169 }, + { 0x90131, 0x0 }, + { 0x90132, 0x8080 }, + { 0x90133, 0x108 }, + { 0x90134, 0x8 }, + { 0x90135, 0x7aa }, + { 0x90136, 0x6a }, + { 0x90137, 0x0 }, + { 0x90138, 0x8568 }, + { 0x90139, 0x108 }, + { 0x9013a, 0xb7 }, + { 0x9013b, 0x790 }, + { 0x9013c, 0x16a }, + { 0x9013d, 0x1f }, + { 0x9013e, 0x0 }, + { 0x9013f, 0x68 }, + { 0x90140, 0x8 }, + { 0x90141, 0x8558 }, + { 0x90142, 0x168 }, + { 0x90143, 0xf }, + { 0x90144, 0x408 }, + { 0x90145, 0x169 }, + { 0x90146, 0xc }, + { 0x90147, 0x0 }, + { 0x90148, 0x68 }, + { 0x90149, 0x0 }, + { 0x9014a, 0x408 }, + { 0x9014b, 0x169 }, + { 0x9014c, 0x0 }, + { 0x9014d, 0x8558 }, + { 0x9014e, 0x168 }, + { 0x9014f, 0x8 }, + { 0x90150, 0x3c8 }, + { 0x90151, 0x1a9 }, + { 0x90152, 0x3 }, + { 0x90153, 0x370 }, + { 0x90154, 0x129 }, + { 0x90155, 0x20 }, + { 0x90156, 0x2aa }, + { 0x90157, 0x9 }, + { 0x90158, 0x0 }, + { 0x90159, 0x400 }, + { 0x9015a, 0x10e }, + { 0x9015b, 0x8 }, + { 0x9015c, 0xe8 }, + { 0x9015d, 0x109 }, + { 0x9015e, 0x0 }, + { 0x9015f, 0x8140 }, + { 0x90160, 0x10c }, + { 0x90161, 0x10 }, + { 0x90162, 0x8138 }, + { 0x90163, 0x10c }, + { 0x90164, 0x8 }, + { 0x90165, 0x7c8 }, + { 0x90166, 0x101 }, + { 0x90167, 0x8 }, + { 0x90168, 0x0 }, + { 0x90169, 0x8 }, + { 0x9016a, 0x8 }, + { 0x9016b, 0x448 }, + { 0x9016c, 0x109 }, + { 0x9016d, 0xf }, + { 0x9016e, 0x7c0 }, + { 0x9016f, 0x109 }, + { 0x90170, 0x0 }, + { 0x90171, 0xe8 }, + { 0x90172, 0x109 }, + { 0x90173, 0x47 }, + { 0x90174, 0x630 }, + { 0x90175, 0x109 }, + { 0x90176, 0x8 }, + { 0x90177, 0x618 }, + { 0x90178, 0x109 }, + { 0x90179, 0x8 }, + { 0x9017a, 0xe0 }, + { 0x9017b, 0x109 }, + { 0x9017c, 0x0 }, + { 0x9017d, 0x7c8 }, + { 0x9017e, 0x109 }, + { 0x9017f, 0x8 }, + { 0x90180, 0x8140 }, + { 0x90181, 0x10c }, + { 0x90182, 0x0 }, + { 0x90183, 0x1 }, + { 0x90184, 0x8 }, + { 0x90185, 0x8 }, + { 0x90186, 0x4 }, + { 0x90187, 0x8 }, + { 0x90188, 0x8 }, + { 0x90189, 0x7c8 }, + { 0x9018a, 0x101 }, + { 0x90006, 0x0 }, + { 0x90007, 0x0 }, + { 0x90008, 0x8 }, + { 0x90009, 0x0 }, + { 0x9000a, 0x0 }, + { 0x9000b, 0x0 }, + { 0xd00e7, 0x400 }, + { 0x90017, 0x0 }, + { 0x9001f, 0x2a }, + { 0x90026, 0x6a }, + { 0x400d0, 0x0 }, + { 0x400d1, 0x101 }, + { 0x400d2, 0x105 }, + { 0x400d3, 0x107 }, + { 0x400d4, 0x10f }, + { 0x400d5, 0x202 }, + { 0x400d6, 0x20a }, + { 0x400d7, 0x20b }, + { 0x2003a, 0x2 }, + { 0x2000b, 0x64 }, + { 0x2000c, 0xc8 }, + { 0x2000d, 0x7d0 }, + { 0x2000e, 0x2c }, + { 0x12000b, 0xc }, + { 0x12000c, 0x19 }, + { 0x12000d, 0xfa }, + { 0x12000e, 0x10 }, + { 0x22000b, 0x3 }, + { 0x22000c, 0x6 }, + { 0x22000d, 0x3e }, + { 0x22000e, 0x10 }, + { 0x9000c, 0x0 }, + { 0x9000d, 0x173 }, + { 0x9000e, 0x60 }, + { 0x9000f, 0x6110 }, + { 0x90010, 0x2152 }, + { 0x90011, 0xdfbd }, + { 0x90012, 0x60 }, + { 0x90013, 0x6152 }, + { 0x20010, 0x5a }, + { 0x20011, 0x3 }, + { 0x40080, 0xe0 }, + { 0x40081, 0x12 }, + { 0x40082, 0xe0 }, + { 0x40083, 0x12 }, + { 0x40084, 0xe0 }, + { 0x40085, 0x12 }, + { 0x140080, 0xe0 }, + { 0x140081, 0x12 }, + { 0x140082, 0xe0 }, + { 0x140083, 0x12 }, + { 0x140084, 0xe0 }, + { 0x140085, 0x12 }, + { 0x240080, 0xe0 }, + { 0x240081, 0x12 }, + { 0x240082, 0xe0 }, + { 0x240083, 0x12 }, + { 0x240084, 0xe0 }, + { 0x240085, 0x12 }, + { 0x400fd, 0xf }, + { 0x10011, 0x1 }, + { 0x10012, 0x1 }, + { 0x10013, 0x180 }, + { 0x10018, 0x1 }, + { 0x10002, 0x6209 }, + { 0x100b2, 0x1 }, + { 0x101b4, 0x1 }, + { 0x102b4, 0x1 }, + { 0x103b4, 0x1 }, + { 0x104b4, 0x1 }, + { 0x105b4, 0x1 }, + { 0x106b4, 0x1 }, + { 0x107b4, 0x1 }, + { 0x108b4, 0x1 }, + { 0x11011, 0x1 }, + { 0x11012, 0x1 }, + { 0x11013, 0x180 }, + { 0x11018, 0x1 }, + { 0x11002, 0x6209 }, + { 0x110b2, 0x1 }, + { 0x111b4, 0x1 }, + { 0x112b4, 0x1 }, + { 0x113b4, 0x1 }, + { 0x114b4, 0x1 }, + { 0x115b4, 0x1 }, + { 0x116b4, 0x1 }, + { 0x117b4, 0x1 }, + { 0x118b4, 0x1 }, + { 0x12011, 0x1 }, + { 0x12012, 0x1 }, + { 0x12013, 0x180 }, + { 0x12018, 0x1 }, + { 0x12002, 0x6209 }, + { 0x120b2, 0x1 }, + { 0x121b4, 0x1 }, + { 0x122b4, 0x1 }, + { 0x123b4, 0x1 }, + { 0x124b4, 0x1 }, + { 0x125b4, 0x1 }, + { 0x126b4, 0x1 }, + { 0x127b4, 0x1 }, + { 0x128b4, 0x1 }, + { 0x13011, 0x1 }, + { 0x13012, 0x1 }, + { 0x13013, 0x180 }, + { 0x13018, 0x1 }, + { 0x13002, 0x6209 }, + { 0x130b2, 0x1 }, + { 0x131b4, 0x1 }, + { 0x132b4, 0x1 }, + { 0x133b4, 0x1 }, + { 0x134b4, 0x1 }, + { 0x135b4, 0x1 }, + { 0x136b4, 0x1 }, + { 0x137b4, 0x1 }, + { 0x138b4, 0x1 }, + { 0x2003a, 0x2 }, + { 0xc0080, 0x2 }, + { 0xd0000, 0x1 }, +}; + +struct dram_fsp_msg lpddr4_dram_fsp_msg[] = { + { + /* P0 3200mts 1D */ + .drate = 3200, + .fw_type = FW_1D_IMAGE, + .fsp_cfg = lpddr4_fsp0_cfg, + .fsp_cfg_num = ARRAY_SIZE(lpddr4_fsp0_cfg), + }, + { + /* P1 400mts 1D */ + .drate = 400, + .fw_type = FW_1D_IMAGE, + .fsp_cfg = lpddr4_fsp1_cfg, + .fsp_cfg_num = ARRAY_SIZE(lpddr4_fsp1_cfg), + }, + { + /* P1 100mts 1D */ + .drate = 100, + .fw_type = FW_1D_IMAGE, + .fsp_cfg = lpddr4_fsp2_cfg, + .fsp_cfg_num = ARRAY_SIZE(lpddr4_fsp2_cfg), + }, + { + /* P0 3200mts 2D */ + .drate = 3200, + .fw_type = FW_2D_IMAGE, + .fsp_cfg = lpddr4_fsp0_2d_cfg, + .fsp_cfg_num = ARRAY_SIZE(lpddr4_fsp0_2d_cfg), + }, +}; + +/* lpddr4 timing config params on EVK board */ +struct dram_timing_info dram_timing = { + .ddrc_cfg = lpddr4_ddrc_cfg, + .ddrc_cfg_num = ARRAY_SIZE(lpddr4_ddrc_cfg), + .ddrphy_cfg = lpddr4_ddrphy_cfg, + .ddrphy_cfg_num = ARRAY_SIZE(lpddr4_ddrphy_cfg), + .fsp_msg = lpddr4_dram_fsp_msg, + .fsp_msg_num = ARRAY_SIZE(lpddr4_dram_fsp_msg), + .ddrphy_pie = lpddr4_phy_pie, + .ddrphy_pie_num = ARRAY_SIZE(lpddr4_phy_pie), + .fsp_table = { 3200, 400, 100, }, +}; diff --git a/board/purism/librem5/lpddr4_timing_b0.c b/board/purism/librem5/lpddr4_timing_b0.c new file mode 100644 index 00000000000..ec68edaf690 --- /dev/null +++ b/board/purism/librem5/lpddr4_timing_b0.c @@ -0,0 +1,1191 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018 NXP + */ + +#include <linux/kernel.h> +#include <common.h> +#include <asm/arch/ddr.h> +#include <asm/arch/lpddr4_define.h> + +#define WR_POST_EXT_3200 /* recommened to define */ + +static struct dram_cfg_param lpddr4_ddrc_cfg[] = { + /* Start to config, default 3200mbps */ + /* dis_dq=1, indicates no reads or writes are issued to SDRAM */ + { DDRC_DBG1(0), 0x00000001 }, + /* selfref_en=1, SDRAM enter self-refresh state */ + { DDRC_PWRCTL(0), 0x00000001 }, + { DDRC_MSTR(0), 0xa3080020 }, + { DDRC_MSTR2(0), 0x00000000 }, + { DDRC_RFSHTMG(0), 0x006100E0 }, + { DDRC_INIT0(0), 0xC003061B }, + { DDRC_INIT1(0), 0x009D0000 }, + { DDRC_INIT3(0), 0x00D4002D }, +#ifdef WR_POST_EXT_3200 /* recommened to define */ + { DDRC_INIT4(0), 0x00330008 }, +#else + { DDRC_INIT4(0), 0x00310008 }, +#endif + { DDRC_INIT6(0), 0x0066004a }, + { DDRC_INIT7(0), 0x0006004a }, + + { DDRC_DRAMTMG0(0), 0x1A201B22 }, + { DDRC_DRAMTMG1(0), 0x00060633 }, + { DDRC_DRAMTMG3(0), 0x00C0C000 }, + { DDRC_DRAMTMG4(0), 0x0F04080F }, + { DDRC_DRAMTMG5(0), 0x02040C0C }, + { DDRC_DRAMTMG6(0), 0x01010007 }, + { DDRC_DRAMTMG7(0), 0x00000401 }, + { DDRC_DRAMTMG12(0), 0x00020600 }, + { DDRC_DRAMTMG13(0), 0x0C100002 }, + { DDRC_DRAMTMG14(0), 0x000000E6 }, + { DDRC_DRAMTMG17(0), 0x00A00050 }, + + { DDRC_ZQCTL0(0), 0x03200018 }, + { DDRC_ZQCTL1(0), 0x028061A8 }, + { DDRC_ZQCTL2(0), 0x00000000 }, + + { DDRC_DFITMG0(0), 0x0497820A }, + { DDRC_DFITMG1(0), 0x00080303 }, + { DDRC_DFIUPD0(0), 0xE0400018 }, + { DDRC_DFIUPD1(0), 0x00DF00E4 }, + { DDRC_DFIUPD2(0), 0x80000000 }, + { DDRC_DFIMISC(0), 0x00000011 }, + { DDRC_DFITMG2(0), 0x0000170A }, + + { DDRC_DBICTL(0), 0x00000001 }, + { DDRC_DFIPHYMSTR(0), 0x00000001 }, + + /* need be refined by ddrphy trained value */ + { DDRC_RANKCTL(0), 0x00000c99 }, + { DDRC_DRAMTMG2(0), 0x070E171a }, + + /* address mapping */ + /* Address map is from MSB 29: r15, r14, cs, r13-r0, b2-b0, c9-c0 */ + { DDRC_ADDRMAP0(0), 0x00000015 }, + { DDRC_ADDRMAP3(0), 0x00000000 }, + /* addrmap_col_b10 addrmap_col_b11 set to de-activated (5-bit width) */ + { DDRC_ADDRMAP4(0), 0x00001F1F }, + /* bank interleave */ + /* addrmap_bank_b2, addrmap_bank_b1, addrmap_bank_b0 */ + { DDRC_ADDRMAP1(0), 0x00080808 }, + /* addrmap_row_b11 addrmap_row_b10_b2 addrmap_row_b1 addrmap_row_b0 */ + { DDRC_ADDRMAP5(0), 0x07070707 }, + /* addrmap_row_b15 addrmap_row_b14 addrmap_row_b13 addrmap_row_b12 */ + { DDRC_ADDRMAP6(0), 0x08080707 }, + + /* 667mts frequency setting */ + { DDRC_FREQ1_DERATEEN(0), 0x0000000 }, + { DDRC_FREQ1_DERATEINT(0), 0x0800000 }, + { DDRC_FREQ1_RFSHCTL0(0), 0x0210000 }, + { DDRC_FREQ1_RFSHTMG(0), 0x014001E }, + { DDRC_FREQ1_INIT3(0), 0x0140009 }, + { DDRC_FREQ1_INIT4(0), 0x00310008 }, + { DDRC_FREQ1_INIT6(0), 0x0066004a }, + { DDRC_FREQ1_INIT7(0), 0x0006004a }, + { DDRC_FREQ1_DRAMTMG0(0), 0xB070A07 }, + { DDRC_FREQ1_DRAMTMG1(0), 0x003040A }, + { DDRC_FREQ1_DRAMTMG2(0), 0x305080C }, + { DDRC_FREQ1_DRAMTMG3(0), 0x0505000 }, + { DDRC_FREQ1_DRAMTMG4(0), 0x3040203 }, + { DDRC_FREQ1_DRAMTMG5(0), 0x2030303 }, + { DDRC_FREQ1_DRAMTMG6(0), 0x2020004 }, + { DDRC_FREQ1_DRAMTMG7(0), 0x0000302 }, + { DDRC_FREQ1_DRAMTMG12(0), 0x0020310 }, + { DDRC_FREQ1_DRAMTMG13(0), 0xA100002 }, + { DDRC_FREQ1_DRAMTMG14(0), 0x0000020 }, + { DDRC_FREQ1_DRAMTMG17(0), 0x0220011 }, + { DDRC_FREQ1_ZQCTL0(0), 0x0A70005 }, + { DDRC_FREQ1_DFITMG0(0), 0x3858202 }, + { DDRC_FREQ1_DFITMG1(0), 0x0000404 }, + { DDRC_FREQ1_DFITMG2(0), 0x0000502 }, + + /* performance setting */ + { DDRC_ODTCFG(0), 0x0b060908 }, + { DDRC_ODTMAP(0), 0x00000000 }, + { DDRC_SCHED(0), 0x29511505 }, + { DDRC_SCHED1(0), 0x0000002c }, + { DDRC_PERFHPR1(0), 0x5900575b }, + /* 150T starve and 0x90 max tran len */ + { DDRC_PERFLPR1(0), 0x90000096 }, + /* 300T starve and 0x10 max tran len */ + { DDRC_PERFWR1(0), 0x1000012c }, + { DDRC_DBG0(0), 0x00000016 }, + { DDRC_DBG1(0), 0x00000000 }, + { DDRC_DBGCMD(0), 0x00000000 }, + { DDRC_SWCTL(0), 0x00000001 }, + { DDRC_POISONCFG(0), 0x00000011 }, + { DDRC_PCCFG(0), 0x00000111 }, + { DDRC_PCFGR_0(0), 0x000010f3 }, + { DDRC_PCFGW_0(0), 0x000072ff }, + { DDRC_PCTRL_0(0), 0x00000001 }, + /* disable Read Qos*/ + { DDRC_PCFGQOS0_0(0), 0x00000e00 }, + { DDRC_PCFGQOS1_0(0), 0x0062ffff }, + /* disable Write Qos*/ + { DDRC_PCFGWQOS0_0(0), 0x00000e00 }, + { DDRC_PCFGWQOS1_0(0), 0x0000ffff }, + { DDRC_FREQ1_DERATEEN(0), 0x00000202 }, + { DDRC_FREQ1_DERATEINT(0), 0xec78f4b5 }, + { DDRC_FREQ1_RFSHCTL0(0), 0x00618040 }, + { DDRC_FREQ1_RFSHTMG(0), 0x00610090 }, +}; + +/* PHY Initialize Configuration */ +static struct dram_cfg_param lpddr4_ddrphy_cfg[] = { + { 0x20110, 0x02 }, /* MapCAB0toDFI */ + { 0x20111, 0x03 }, /* MapCAB1toDFI */ + { 0x20112, 0x04 }, /* MapCAB2toDFI */ + { 0x20113, 0x05 }, /* MapCAB3toDFI */ + { 0x20114, 0x00 }, /* MapCAB4toDFI */ + { 0x20115, 0x01 }, /* MapCAB5toDFI */ + + /* Initialize PHY Configuration */ + { 0x1005f, 0x1ff }, + { 0x1015f, 0x1ff }, + { 0x1105f, 0x1ff }, + { 0x1115f, 0x1ff }, + { 0x1205f, 0x1ff }, + { 0x1215f, 0x1ff }, + { 0x1305f, 0x1ff }, + { 0x1315f, 0x1ff }, + + { 0x11005f, 0x1ff }, + { 0x11015f, 0x1ff }, + { 0x11105f, 0x1ff }, + { 0x11115f, 0x1ff }, + { 0x11205f, 0x1ff }, + { 0x11215f, 0x1ff }, + { 0x11305f, 0x1ff }, + { 0x11315f, 0x1ff }, + + { 0x21005f, 0x1ff }, + { 0x21015f, 0x1ff }, + { 0x21105f, 0x1ff }, + { 0x21115f, 0x1ff }, + { 0x21205f, 0x1ff }, + { 0x21215f, 0x1ff }, + { 0x21305f, 0x1ff }, + { 0x21315f, 0x1ff }, + + { 0x55, 0x1ff }, + { 0x1055, 0x1ff }, + { 0x2055, 0x1ff }, + { 0x3055, 0x1ff }, + { 0x4055, 0x1ff }, + { 0x5055, 0x1ff }, + { 0x6055, 0x1ff }, + { 0x7055, 0x1ff }, + { 0x8055, 0x1ff }, + { 0x9055, 0x1ff }, + { 0x200c5, 0x19 }, + { 0x1200c5, 0x7 }, + { 0x2200c5, 0x7 }, + { 0x2002e, 0x2 }, + { 0x12002e, 0x1 }, + { 0x22002e, 0x2 }, + { 0x90204, 0x0 }, + { 0x190204, 0x0 }, + { 0x290204, 0x0 }, + + { 0x20024, 0xe3 }, + { 0x2003a, 0x2 }, + { 0x120024, 0xa3 }, + { 0x2003a, 0x2 }, + { 0x220024, 0xa3 }, + { 0x2003a, 0x2 }, + + { 0x20056, 0x3 }, + { 0x120056, 0xa }, + { 0x220056, 0xa }, + + { 0x1004d, 0xe00 }, + { 0x1014d, 0xe00 }, + { 0x1104d, 0xe00 }, + { 0x1114d, 0xe00 }, + { 0x1204d, 0xe00 }, + { 0x1214d, 0xe00 }, + { 0x1304d, 0xe00 }, + { 0x1314d, 0xe00 }, + { 0x11004d, 0xe00 }, + { 0x11014d, 0xe00 }, + { 0x11104d, 0xe00 }, + { 0x11114d, 0xe00 }, + { 0x11204d, 0xe00 }, + { 0x11214d, 0xe00 }, + { 0x11304d, 0xe00 }, + { 0x11314d, 0xe00 }, + { 0x21004d, 0xe00 }, + { 0x21014d, 0xe00 }, + { 0x21104d, 0xe00 }, + { 0x21114d, 0xe00 }, + { 0x21204d, 0xe00 }, + { 0x21214d, 0xe00 }, + { 0x21304d, 0xe00 }, + { 0x21314d, 0xe00 }, + + { 0x10049, 0xfbe }, + { 0x10149, 0xfbe }, + { 0x11049, 0xfbe }, + { 0x11149, 0xfbe }, + { 0x12049, 0xfbe }, + { 0x12149, 0xfbe }, + { 0x13049, 0xfbe }, + { 0x13149, 0xfbe }, + + { 0x110049, 0xfbe }, + { 0x110149, 0xfbe }, + { 0x111049, 0xfbe }, + { 0x111149, 0xfbe }, + { 0x112049, 0xfbe }, + { 0x112149, 0xfbe }, + { 0x113049, 0xfbe }, + { 0x113149, 0xfbe }, + + { 0x210049, 0xfbe }, + { 0x210149, 0xfbe }, + { 0x211049, 0xfbe }, + { 0x211149, 0xfbe }, + { 0x212049, 0xfbe }, + { 0x212149, 0xfbe }, + { 0x213049, 0xfbe }, + { 0x213149, 0xfbe }, + + { 0x43, 0x63 }, + { 0x1043, 0x63 }, + { 0x2043, 0x63 }, + { 0x3043, 0x63 }, + { 0x4043, 0x63 }, + { 0x5043, 0x63 }, + { 0x6043, 0x63 }, + { 0x7043, 0x63 }, + { 0x8043, 0x63 }, + { 0x9043, 0x63 }, + + { 0x20018, 0x3 }, + { 0x20075, 0x4 }, + { 0x20050, 0x0 }, + { 0x20008, 0x320 }, + { 0x120008, 0xa7 }, + { 0x220008, 0x19 }, + { 0x20088, 0x9 }, + { 0x200b2, 0x104 }, + { 0x10043, 0x5a1 }, + { 0x10143, 0x5a1 }, + { 0x11043, 0x5a1 }, + { 0x11143, 0x5a1 }, + { 0x12043, 0x5a1 }, + { 0x12143, 0x5a1 }, + { 0x13043, 0x5a1 }, + { 0x13143, 0x5a1 }, + { 0x1200b2, 0x104 }, + { 0x110043, 0x5a1 }, + { 0x110143, 0x5a1 }, + { 0x111043, 0x5a1 }, + { 0x111143, 0x5a1 }, + { 0x112043, 0x5a1 }, + { 0x112143, 0x5a1 }, + { 0x113043, 0x5a1 }, + { 0x113143, 0x5a1 }, + { 0x2200b2, 0x104 }, + { 0x210043, 0x5a1 }, + { 0x210143, 0x5a1 }, + { 0x211043, 0x5a1 }, + { 0x211143, 0x5a1 }, + { 0x212043, 0x5a1 }, + { 0x212143, 0x5a1 }, + { 0x213043, 0x5a1 }, + { 0x213143, 0x5a1 }, + { 0x200fa, 0x1 }, + { 0x1200fa, 0x1 }, + { 0x2200fa, 0x1 }, + { 0x20019, 0x1 }, + { 0x120019, 0x1 }, + { 0x220019, 0x1 }, + { 0x200f0, 0x600 }, + { 0x200f1, 0x0 }, + { 0x200f2, 0x4444 }, + { 0x200f3, 0x8888 }, + { 0x200f4, 0x5655 }, + { 0x200f5, 0x0 }, + { 0x200f6, 0x0 }, + { 0x200f7, 0xf000 }, + { 0x20025, 0x0 }, + { 0x2002d, 0x0 }, + { 0x12002d, 0x0 }, + { 0x22002d, 0x0 }, +}; + +/* P0 message block paremeter for training firmware */ +static struct dram_cfg_param lpddr4_fsp0_cfg[] = { + { 0xd0000, 0x0 }, + { 0x54000, 0x0 }, + { 0x54001, 0x0 }, + { 0x54002, 0x0 }, + { 0x54003, 0xc80 }, + { 0x54004, 0x2 }, + { 0x54005, ((LPDDR4_PHY_RON << 8) | LPDDR4_PHY_RTT) }, + { 0x54006, LPDDR4_PHY_VREF_VALUE }, + { 0x54007, 0x0 }, + { 0x54008, 0x131f }, + { 0x54009, LPDDR4_HDT_CTL_3200_1D }, + { 0x5400a, 0x0 }, + { 0x5400b, 0x2 }, + { 0x5400c, 0x0 }, + { 0x5400d, (LPDDR4_CATRAIN_3200_1d << 8) }, + { 0x5400e, 0x0 }, + { 0x5400f, 0x0 }, + { 0x54010, 0x0 }, + { 0x54011, 0x0 }, + { 0x54012, 0x310 }, + { 0x54013, 0x0 }, + { 0x54014, 0x0 }, + { 0x54015, 0x0 }, + { 0x54016, 0x0 }, + { 0x54017, 0x0 }, + { 0x54018, 0x0 }, + { 0x54019, 0x2dd4 }, + { 0x5401a, (((LPDDR4_RON) << 3) | 0x3) }, + { 0x5401b, ((LPDDR4_VREF_VALUE_CA << 8) | + (LPDDR4_RTT_CA_BANK0 << 4) | LPDDR4_RTT_DQ) }, + { 0x5401c, ((LPDDR4_VREF_VALUE_DQ_RANK0 << 8) | 0x08) }, + { 0x5401d, 0x0 }, + { 0x5401e, LPDDR4_MR22_RANK0 }, + { 0x5401f, 0x2dd4 }, + { 0x54020, (((LPDDR4_RON) << 3) | 0x3) }, + { 0x54021, ((LPDDR4_VREF_VALUE_CA << 8) | + (LPDDR4_RTT_CA_BANK1 << 4) | LPDDR4_RTT_DQ) }, + { 0x54022, ((LPDDR4_VREF_VALUE_DQ_RANK1 << 8) | 0x08) }, + { 0x54023, 0x0 }, + { 0x54024, LPDDR4_MR22_RANK1 }, + { 0x54025, 0x0 }, + { 0x54026, 0x0 }, + { 0x54027, 0x0 }, + { 0x54028, 0x0 }, + { 0x54029, 0x0 }, + { 0x5402a, 0x0 }, + { 0x5402b, 0x1000 }, + { 0x5402c, 0x3 }, + { 0x5402d, 0x0 }, + { 0x5402e, 0x0 }, + { 0x5402f, 0x0 }, + { 0x54030, 0x0 }, + { 0x54031, 0x0 }, + { 0x54032, 0xd400 }, + { 0x54033, ((((LPDDR4_RON) << 3) | 0x3) << 8) | 0x2d }, + { 0x54034, (((LPDDR4_RTT_CA_BANK0 << 4) | LPDDR4_RTT_DQ) << 8) }, + { 0x54035, (0x0800 | LPDDR4_VREF_VALUE_CA) }, + { 0x54036, LPDDR4_VREF_VALUE_DQ_RANK0 }, + { 0x54037, (LPDDR4_MR22_RANK0 << 8) }, + { 0x54038, 0xd400 }, + { 0x54039, ((((LPDDR4_RON) << 3) | 0x3) << 8) | 0x2d }, + { 0x5403a, (((LPDDR4_RTT_CA_BANK1 << 4) | LPDDR4_RTT_DQ) << 8) }, + { 0x5403b, (0x0800 | LPDDR4_VREF_VALUE_CA) }, + { 0x5403c, LPDDR4_VREF_VALUE_DQ_RANK1 }, + { 0x5403d, (LPDDR4_MR22_RANK1 << 8) }, + { 0x5403d, (LPDDR4_MR22_RANK1 << 8) }, + { 0x5403e, 0x0 }, + { 0x5403f, 0x0 }, + { 0x54040, 0x0 }, + { 0x54041, 0x0 }, + { 0x54042, 0x0 }, + { 0x54043, 0x0 }, + { 0x54044, 0x0 }, + { 0xd0000, 0x1 }, +}; + +/* P1 message block paremeter for training firmware */ +static struct dram_cfg_param lpddr4_fsp1_cfg[] = { + { 0xd0000, 0x0 }, + { 0x54000, 0x0 }, + { 0x54001, 0x0 }, + { 0x54002, 0x1 }, + { 0x54003, 0x29c }, + { 0x54004, 0x2 }, + { 0x54005, ((LPDDR4_PHY_RON << 8) | LPDDR4_PHY_RTT) }, + { 0x54006, LPDDR4_PHY_VREF_VALUE }, + { 0x54007, 0x0 }, + { 0x54008, 0x121f }, + { 0x54009, 0xc8 }, + { 0x5400a, 0x0 }, + { 0x5400b, 0x2 }, + { 0x5400c, 0x0 }, + { 0x5400d, 0x0 }, + { 0x5400e, 0x0 }, + { 0x5400f, 0x0 }, + { 0x54010, 0x0 }, + { 0x54011, 0x0 }, + { 0x54012, 0x310 }, + { 0x54013, 0x0 }, + { 0x54014, 0x0 }, + { 0x54015, 0x0 }, + { 0x54016, 0x0 }, + { 0x54017, 0x0 }, + { 0x54018, 0x0 }, + { 0x54019, 0x914 }, + { 0x5401a, (((LPDDR4_RON) << 3) | 0x1) }, + { 0x5401b, ((LPDDR4_VREF_VALUE_CA << 8) | + (LPDDR4_RTT_CA_BANK0 << 4) | LPDDR4_RTT_DQ) }, + { 0x5401c, ((LPDDR4_VREF_VALUE_DQ_RANK0 << 8) | 0x08) }, + { 0x5401e, 0x6 }, + { 0x5401f, 0x914 }, + { 0x54020, (((LPDDR4_RON) << 3) | 0x1) }, + { 0x54021, ((LPDDR4_VREF_VALUE_CA << 8) | + (LPDDR4_RTT_CA_BANK1 << 4) | LPDDR4_RTT_DQ) }, + { 0x54022, ((LPDDR4_VREF_VALUE_DQ_RANK1 << 8) | 0x08) }, + { 0x54023, 0x0 }, + { 0x54024, LPDDR4_MR22_RANK1 }, + { 0x54025, 0x0 }, + { 0x54026, 0x0 }, + { 0x54027, 0x0 }, + { 0x54028, 0x0 }, + { 0x54029, 0x0 }, + { 0x5402a, 0x0 }, + { 0x5402b, 0x1000 }, + { 0x5402c, 0x3 }, + { 0x5402d, 0x0 }, + { 0x5402e, 0x0 }, + { 0x5402f, 0x0 }, + { 0x54030, 0x0 }, + { 0x54031, 0x0 }, + { 0x54032, 0x1400 }, + { 0x54033, ((((LPDDR4_RON) << 3) | 0x1) << 8) | 0x09 }, + { 0x54034, (((LPDDR4_RTT_CA_BANK0 << 4) | LPDDR4_RTT_DQ) << 8) }, + { 0x54035, (0x0800 | LPDDR4_VREF_VALUE_CA) }, + { 0x54036, LPDDR4_VREF_VALUE_DQ_RANK0 }, + { 0x54037, 0x600 }, + { 0x54038, 0x1400 }, + { 0x54039, ((((LPDDR4_RON) << 3) | 0x1) << 8) | 0x09 }, + { 0x5403a, (((LPDDR4_RTT_CA_BANK1 << 4) | LPDDR4_RTT_DQ) << 8) }, + { 0x5403b, (0x0800 | LPDDR4_VREF_VALUE_CA) }, + { 0x5403c, LPDDR4_VREF_VALUE_DQ_RANK1 }, + { 0x5403d, (LPDDR4_MR22_RANK1 << 8) }, + { 0x5403e, 0x0 }, + { 0x5403f, 0x0 }, + { 0x54040, 0x0 }, + { 0x54041, 0x0 }, + { 0x54042, 0x0 }, + { 0x54043, 0x0 }, + { 0xd0000, 0x1 }, + +}; + +/* P0 2D message block paremeter for training firmware */ +static struct dram_cfg_param lpddr4_fsp0_2d_cfg[] = { + { 0xd0000, 0x0 }, + { 0x54000, 0x0 }, + { 0x54001, 0x0 }, + { 0x54002, 0x0 }, + { 0x54003, 0xc80 }, + { 0x54004, 0x2 }, + { 0x54005, ((LPDDR4_PHY_RON << 8) | LPDDR4_PHY_RTT) }, + { 0x54006, LPDDR4_PHY_VREF_VALUE }, + { 0x54007, 0x0 }, + { 0x54008, 0x61 }, + { 0x54009, LPDDR4_HDT_CTL_2D }, + { 0x5400a, 0x0 }, + { 0x5400b, 0x2 }, + { 0x5400c, 0x0 }, + { 0x5400d, (LPDDR4_CATRAIN_3200_2d << 8) }, + { 0x5400e, 0x0 }, + { 0x5400f, (LPDDR4_2D_SHARE << 8) | 0x00 }, + { 0x54010, LPDDR4_2D_WEIGHT }, + { 0x54011, 0x0 }, + { 0x54012, 0x310 }, + { 0x54013, 0x0 }, + { 0x54014, 0x0 }, + { 0x54015, 0x0 }, + { 0x54016, 0x0 }, + { 0x54017, 0x0 }, + { 0x54018, 0x0 }, + { 0x54024, 0x5 }, + { 0x54019, 0x2dd4 }, + { 0x5401a, (((LPDDR4_RON) << 3) | 0x3) }, + { 0x5401b, ((LPDDR4_VREF_VALUE_CA << 8) | + (LPDDR4_RTT_CA_BANK0 << 4) | LPDDR4_RTT_DQ) }, + { 0x5401c, ((LPDDR4_VREF_VALUE_DQ_RANK0 << 8) | 0x08) }, + { 0x5401d, 0x0 }, + { 0x5401e, LPDDR4_MR22_RANK0 }, + { 0x5401f, 0x2dd4 }, + { 0x54020, (((LPDDR4_RON) << 3) | 0x3) }, + { 0x54021, ((LPDDR4_VREF_VALUE_CA << 8) | + (LPDDR4_RTT_CA_BANK1 << 4) | LPDDR4_RTT_DQ) }, + { 0x54022, ((LPDDR4_VREF_VALUE_DQ_RANK1 << 8) | 0x08) }, + { 0x54023, 0x0 }, + { 0x54024, LPDDR4_MR22_RANK1 }, + { 0x54025, 0x0 }, + { 0x54026, 0x0 }, + { 0x54027, 0x0 }, + { 0x54028, 0x0 }, + { 0x54029, 0x0 }, + { 0x5402a, 0x0 }, + { 0x5402b, 0x1000 }, + { 0x5402c, 0x3 }, + { 0x5402d, 0x0 }, + { 0x5402e, 0x0 }, + { 0x5402f, 0x0 }, + { 0x54030, 0x0 }, + { 0x54031, 0x0 }, + { 0x54032, 0xd400 }, + { 0x54033, ((((LPDDR4_RON) << 3) | 0x3) << 8) | 0x2d }, + { 0x54034, (((LPDDR4_RTT_CA_BANK0 << 4) | LPDDR4_RTT_DQ) << 8) }, + { 0x54035, (0x0800 | LPDDR4_VREF_VALUE_CA) }, + { 0x54036, LPDDR4_VREF_VALUE_DQ_RANK0 }, + { 0x54037, (LPDDR4_MR22_RANK0 << 8) }, + { 0x54038, 0xd400 }, + { 0x54039, ((((LPDDR4_RON) << 3) | 0x3) << 8) | 0x2d }, + { 0x5403a, (((LPDDR4_RTT_CA_BANK1 << 4) | LPDDR4_RTT_DQ) << 8) }, + { 0x5403b, (0x0800 | LPDDR4_VREF_VALUE_CA) }, + { 0x5403c, LPDDR4_VREF_VALUE_DQ_RANK1 }, + { 0x5403d, (LPDDR4_MR22_RANK1 << 8) }, + { 0x5403e, 0x0 }, + { 0x5403f, 0x0 }, + { 0x54040, 0x0 }, + { 0x54041, 0x0 }, + { 0x54042, 0x0 }, + { 0x54043, 0x0 }, + { 0x54044, 0x0 }, + { 0xd0000, 0x1 }, + +}; + +/* DRAM PHY init engine image */ +static struct dram_cfg_param lpddr4_phy_pie[] = { + { 0xd0000, 0x0 }, + { 0x90000, 0x10 }, + { 0x90001, 0x400 }, + { 0x90002, 0x10e }, + { 0x90003, 0x0 }, + { 0x90004, 0x0 }, + { 0x90005, 0x8 }, + { 0x90029, 0xb }, + { 0x9002a, 0x480 }, + { 0x9002b, 0x109 }, + { 0x9002c, 0x8 }, + { 0x9002d, 0x448 }, + { 0x9002e, 0x139 }, + { 0x9002f, 0x8 }, + { 0x90030, 0x478 }, + { 0x90031, 0x109 }, + { 0x90032, 0x0 }, + { 0x90033, 0xe8 }, + { 0x90034, 0x109 }, + { 0x90035, 0x2 }, + { 0x90036, 0x10 }, + { 0x90037, 0x139 }, + { 0x90038, 0xb }, + { 0x90039, 0x7c0 }, + { 0x9003a, 0x139 }, + { 0x9003b, 0x44 }, + { 0x9003c, 0x630 }, + { 0x9003d, 0x159 }, + { 0x9003e, 0x14f }, + { 0x9003f, 0x630 }, + { 0x90040, 0x159 }, + { 0x90041, 0x47 }, + { 0x90042, 0x630 }, + { 0x90043, 0x149 }, + { 0x90044, 0x4f }, + { 0x90045, 0x630 }, + { 0x90046, 0x179 }, + { 0x90047, 0x8 }, + { 0x90048, 0xe0 }, + { 0x90049, 0x109 }, + { 0x9004a, 0x0 }, + { 0x9004b, 0x7c8 }, + { 0x9004c, 0x109 }, + { 0x9004d, 0x0 }, + { 0x9004e, 0x1 }, + { 0x9004f, 0x8 }, + { 0x90050, 0x0 }, + { 0x90051, 0x45a }, + { 0x90052, 0x9 }, + { 0x90053, 0x0 }, + { 0x90054, 0x448 }, + { 0x90055, 0x109 }, + { 0x90056, 0x40 }, + { 0x90057, 0x630 }, + { 0x90058, 0x179 }, + { 0x90059, 0x1 }, + { 0x9005a, 0x618 }, + { 0x9005b, 0x109 }, + { 0x9005c, 0x40c0 }, + { 0x9005d, 0x630 }, + { 0x9005e, 0x149 }, + { 0x9005f, 0x8 }, + { 0x90060, 0x4 }, + { 0x90061, 0x48 }, + { 0x90062, 0x4040 }, + { 0x90063, 0x630 }, + { 0x90064, 0x149 }, + { 0x90065, 0x0 }, + { 0x90066, 0x4 }, + { 0x90067, 0x48 }, + { 0x90068, 0x40 }, + { 0x90069, 0x630 }, + { 0x9006a, 0x149 }, + { 0x9006b, 0x10 }, + { 0x9006c, 0x4 }, + { 0x9006d, 0x18 }, + { 0x9006e, 0x0 }, + { 0x9006f, 0x4 }, + { 0x90070, 0x78 }, + { 0x90071, 0x549 }, + { 0x90072, 0x630 }, + { 0x90073, 0x159 }, + { 0x90074, 0xd49 }, + { 0x90075, 0x630 }, + { 0x90076, 0x159 }, + { 0x90077, 0x94a }, + { 0x90078, 0x630 }, + { 0x90079, 0x159 }, + { 0x9007a, 0x441 }, + { 0x9007b, 0x630 }, + { 0x9007c, 0x149 }, + { 0x9007d, 0x42 }, + { 0x9007e, 0x630 }, + { 0x9007f, 0x149 }, + { 0x90080, 0x1 }, + { 0x90081, 0x630 }, + { 0x90082, 0x149 }, + { 0x90083, 0x0 }, + { 0x90084, 0xe0 }, + { 0x90085, 0x109 }, + { 0x90086, 0xa }, + { 0x90087, 0x10 }, + { 0x90088, 0x109 }, + { 0x90089, 0x9 }, + { 0x9008a, 0x3c0 }, + { 0x9008b, 0x149 }, + { 0x9008c, 0x9 }, + { 0x9008d, 0x3c0 }, + { 0x9008e, 0x159 }, + { 0x9008f, 0x18 }, + { 0x90090, 0x10 }, + { 0x90091, 0x109 }, + { 0x90092, 0x0 }, + { 0x90093, 0x3c0 }, + { 0x90094, 0x109 }, + { 0x90095, 0x18 }, + { 0x90096, 0x4 }, + { 0x90097, 0x48 }, + { 0x90098, 0x18 }, + { 0x90099, 0x4 }, + { 0x9009a, 0x58 }, + { 0x9009b, 0xa }, + { 0x9009c, 0x10 }, + { 0x9009d, 0x109 }, + { 0x9009e, 0x2 }, + { 0x9009f, 0x10 }, + { 0x900a0, 0x109 }, + { 0x900a1, 0x5 }, + { 0x900a2, 0x7c0 }, + { 0x900a3, 0x109 }, + { 0x900a4, 0xd }, + { 0x900a5, 0x7c0 }, + { 0x900a6, 0x109 }, + { 0x900a7, 0x4 }, + { 0x900a8, 0x7c0 }, + { 0x900a9, 0x109 }, + { 0x40000, 0x811 }, + { 0x40020, 0x880 }, + { 0x40040, 0x0 }, + { 0x40060, 0x0 }, + { 0x40001, 0x4008 }, + { 0x40021, 0x83 }, + { 0x40041, 0x4f }, + { 0x40061, 0x0 }, + { 0x40002, 0x4040 }, + { 0x40022, 0x83 }, + { 0x40042, 0x51 }, + { 0x40062, 0x0 }, + { 0x40003, 0x811 }, + { 0x40023, 0x880 }, + { 0x40043, 0x0 }, + { 0x40063, 0x0 }, + { 0x40004, 0x720 }, + { 0x40024, 0xf }, + { 0x40044, 0x1740 }, + { 0x40064, 0x0 }, + { 0x40005, 0x16 }, + { 0x40025, 0x83 }, + { 0x40045, 0x4b }, + { 0x40065, 0x0 }, + { 0x40006, 0x716 }, + { 0x40026, 0xf }, + { 0x40046, 0x2001 }, + { 0x40066, 0x0 }, + { 0x40007, 0x716 }, + { 0x40027, 0xf }, + { 0x40047, 0x2800 }, + { 0x40067, 0x0 }, + { 0x40008, 0x716 }, + { 0x40028, 0xf }, + { 0x40048, 0xf00 }, + { 0x40068, 0x0 }, + { 0x40009, 0x720 }, + { 0x40029, 0xf }, + { 0x40049, 0x1400 }, + { 0x40069, 0x0 }, + { 0x4000a, 0xe08 }, + { 0x4002a, 0xc15 }, + { 0x4004a, 0x0 }, + { 0x4006a, 0x0 }, + { 0x4000b, 0x623 }, + { 0x4002b, 0x15 }, + { 0x4004b, 0x0 }, + { 0x4006b, 0x0 }, + { 0x4000c, 0x4028 }, + { 0x4002c, 0x80 }, + { 0x4004c, 0x0 }, + { 0x4006c, 0x0 }, + { 0x4000d, 0xe08 }, + { 0x4002d, 0xc1a }, + { 0x4004d, 0x0 }, + { 0x4006d, 0x0 }, + { 0x4000e, 0x623 }, + { 0x4002e, 0x1a }, + { 0x4004e, 0x0 }, + { 0x4006e, 0x0 }, + { 0x4000f, 0x4040 }, + { 0x4002f, 0x80 }, + { 0x4004f, 0x0 }, + { 0x4006f, 0x0 }, + { 0x40010, 0x2604 }, + { 0x40030, 0x15 }, + { 0x40050, 0x0 }, + { 0x40070, 0x0 }, + { 0x40011, 0x708 }, + { 0x40031, 0x5 }, + { 0x40051, 0x0 }, + { 0x40071, 0x2002 }, + { 0x40012, 0x8 }, + { 0x40032, 0x80 }, + { 0x40052, 0x0 }, + { 0x40072, 0x0 }, + { 0x40013, 0x2604 }, + { 0x40033, 0x1a }, + { 0x40053, 0x0 }, + { 0x40073, 0x0 }, + { 0x40014, 0x708 }, + { 0x40034, 0xa }, + { 0x40054, 0x0 }, + { 0x40074, 0x2002 }, + { 0x40015, 0x4040 }, + { 0x40035, 0x80 }, + { 0x40055, 0x0 }, + { 0x40075, 0x0 }, + { 0x40016, 0x60a }, + { 0x40036, 0x15 }, + { 0x40056, 0x1200 }, + { 0x40076, 0x0 }, + { 0x40017, 0x61a }, + { 0x40037, 0x15 }, + { 0x40057, 0x1300 }, + { 0x40077, 0x0 }, + { 0x40018, 0x60a }, + { 0x40038, 0x1a }, + { 0x40058, 0x1200 }, + { 0x40078, 0x0 }, + { 0x40019, 0x642 }, + { 0x40039, 0x1a }, + { 0x40059, 0x1300 }, + { 0x40079, 0x0 }, + { 0x4001a, 0x4808 }, + { 0x4003a, 0x880 }, + { 0x4005a, 0x0 }, + { 0x4007a, 0x0 }, + { 0x900aa, 0x0 }, + { 0x900ab, 0x790 }, + { 0x900ac, 0x11a }, + { 0x900ad, 0x8 }, + { 0x900ae, 0x7aa }, + { 0x900af, 0x2a }, + { 0x900b0, 0x10 }, + { 0x900b1, 0x7b2 }, + { 0x900b2, 0x2a }, + { 0x900b3, 0x0 }, + { 0x900b4, 0x7c8 }, + { 0x900b5, 0x109 }, + { 0x900b6, 0x10 }, + { 0x900b7, 0x10 }, + { 0x900b8, 0x109 }, + { 0x900b9, 0x10 }, + { 0x900ba, 0x2a8 }, + { 0x900bb, 0x129 }, + { 0x900bc, 0x8 }, + { 0x900bd, 0x370 }, + { 0x900be, 0x129 }, + { 0x900bf, 0xa }, + { 0x900c0, 0x3c8 }, + { 0x900c1, 0x1a9 }, + { 0x900c2, 0xc }, + { 0x900c3, 0x408 }, + { 0x900c4, 0x199 }, + { 0x900c5, 0x14 }, + { 0x900c6, 0x790 }, + { 0x900c7, 0x11a }, + { 0x900c8, 0x8 }, + { 0x900c9, 0x4 }, + { 0x900ca, 0x18 }, + { 0x900cb, 0xe }, + { 0x900cc, 0x408 }, + { 0x900cd, 0x199 }, + { 0x900ce, 0x8 }, + { 0x900cf, 0x8568 }, + { 0x900d0, 0x108 }, + { 0x900d1, 0x18 }, + { 0x900d2, 0x790 }, + { 0x900d3, 0x16a }, + { 0x900d4, 0x8 }, + { 0x900d5, 0x1d8 }, + { 0x900d6, 0x169 }, + { 0x900d7, 0x10 }, + { 0x900d8, 0x8558 }, + { 0x900d9, 0x168 }, + { 0x900da, 0x70 }, + { 0x900db, 0x788 }, + { 0x900dc, 0x16a }, + { 0x900dd, 0x1ff8 }, + { 0x900de, 0x85a8 }, + { 0x900df, 0x1e8 }, + { 0x900e0, 0x50 }, + { 0x900e1, 0x798 }, + { 0x900e2, 0x16a }, + { 0x900e3, 0x60 }, + { 0x900e4, 0x7a0 }, + { 0x900e5, 0x16a }, + { 0x900e6, 0x8 }, + { 0x900e7, 0x8310 }, + { 0x900e8, 0x168 }, + { 0x900e9, 0x8 }, + { 0x900ea, 0xa310 }, + { 0x900eb, 0x168 }, + { 0x900ec, 0xa }, + { 0x900ed, 0x408 }, + { 0x900ee, 0x169 }, + { 0x900ef, 0x6e }, + { 0x900f0, 0x0 }, + { 0x900f1, 0x68 }, + { 0x900f2, 0x0 }, + { 0x900f3, 0x408 }, + { 0x900f4, 0x169 }, + { 0x900f5, 0x0 }, + { 0x900f6, 0x8310 }, + { 0x900f7, 0x168 }, + { 0x900f8, 0x0 }, + { 0x900f9, 0xa310 }, + { 0x900fa, 0x168 }, + { 0x900fb, 0x1ff8 }, + { 0x900fc, 0x85a8 }, + { 0x900fd, 0x1e8 }, + { 0x900fe, 0x68 }, + { 0x900ff, 0x798 }, + { 0x90100, 0x16a }, + { 0x90101, 0x78 }, + { 0x90102, 0x7a0 }, + { 0x90103, 0x16a }, + { 0x90104, 0x68 }, + { 0x90105, 0x790 }, + { 0x90106, 0x16a }, + { 0x90107, 0x8 }, + { 0x90108, 0x8b10 }, + { 0x90109, 0x168 }, + { 0x9010a, 0x8 }, + { 0x9010b, 0xab10 }, + { 0x9010c, 0x168 }, + { 0x9010d, 0xa }, + { 0x9010e, 0x408 }, + { 0x9010f, 0x169 }, + { 0x90110, 0x58 }, + { 0x90111, 0x0 }, + { 0x90112, 0x68 }, + { 0x90113, 0x0 }, + { 0x90114, 0x408 }, + { 0x90115, 0x169 }, + { 0x90116, 0x0 }, + { 0x90117, 0x8b10 }, + { 0x90118, 0x168 }, + { 0x90119, 0x0 }, + { 0x9011a, 0xab10 }, + { 0x9011b, 0x168 }, + { 0x9011c, 0x0 }, + { 0x9011d, 0x1d8 }, + { 0x9011e, 0x169 }, + { 0x9011f, 0x80 }, + { 0x90120, 0x790 }, + { 0x90121, 0x16a }, + { 0x90122, 0x18 }, + { 0x90123, 0x7aa }, + { 0x90124, 0x6a }, + { 0x90125, 0xa }, + { 0x90126, 0x0 }, + { 0x90127, 0x1e9 }, + { 0x90128, 0x8 }, + { 0x90129, 0x8080 }, + { 0x9012a, 0x108 }, + { 0x9012b, 0xf }, + { 0x9012c, 0x408 }, + { 0x9012d, 0x169 }, + { 0x9012e, 0xc }, + { 0x9012f, 0x0 }, + { 0x90130, 0x68 }, + { 0x90131, 0x9 }, + { 0x90132, 0x0 }, + { 0x90133, 0x1a9 }, + { 0x90134, 0x0 }, + { 0x90135, 0x408 }, + { 0x90136, 0x169 }, + { 0x90137, 0x0 }, + { 0x90138, 0x8080 }, + { 0x90139, 0x108 }, + { 0x9013a, 0x8 }, + { 0x9013b, 0x7aa }, + { 0x9013c, 0x6a }, + { 0x9013d, 0x0 }, + { 0x9013e, 0x8568 }, + { 0x9013f, 0x108 }, + { 0x90140, 0xb7 }, + { 0x90141, 0x790 }, + { 0x90142, 0x16a }, + { 0x90143, 0x1f }, + { 0x90144, 0x0 }, + { 0x90145, 0x68 }, + { 0x90146, 0x8 }, + { 0x90147, 0x8558 }, + { 0x90148, 0x168 }, + { 0x90149, 0xf }, + { 0x9014a, 0x408 }, + { 0x9014b, 0x169 }, + { 0x9014c, 0xc }, + { 0x9014d, 0x0 }, + { 0x9014e, 0x68 }, + { 0x9014f, 0x0 }, + { 0x90150, 0x408 }, + { 0x90151, 0x169 }, + { 0x90152, 0x0 }, + { 0x90153, 0x8558 }, + { 0x90154, 0x168 }, + { 0x90155, 0x8 }, + { 0x90156, 0x3c8 }, + { 0x90157, 0x1a9 }, + { 0x90158, 0x3 }, + { 0x90159, 0x370 }, + { 0x9015a, 0x129 }, + { 0x9015b, 0x20 }, + { 0x9015c, 0x2aa }, + { 0x9015d, 0x9 }, + { 0x9015e, 0x0 }, + { 0x9015f, 0x400 }, + { 0x90160, 0x10e }, + { 0x90161, 0x8 }, + { 0x90162, 0xe8 }, + { 0x90163, 0x109 }, + { 0x90164, 0x0 }, + { 0x90165, 0x8140 }, + { 0x90166, 0x10c }, + { 0x90167, 0x10 }, + { 0x90168, 0x8138 }, + { 0x90169, 0x10c }, + { 0x9016a, 0x8 }, + { 0x9016b, 0x7c8 }, + { 0x9016c, 0x101 }, + { 0x9016d, 0x8 }, + { 0x9016e, 0x0 }, + { 0x9016f, 0x8 }, + { 0x90170, 0x8 }, + { 0x90171, 0x448 }, + { 0x90172, 0x109 }, + { 0x90173, 0xf }, + { 0x90174, 0x7c0 }, + { 0x90175, 0x109 }, + { 0x90176, 0x0 }, + { 0x90177, 0xe8 }, + { 0x90178, 0x109 }, + { 0x90179, 0x47 }, + { 0x9017a, 0x630 }, + { 0x9017b, 0x109 }, + { 0x9017c, 0x8 }, + { 0x9017d, 0x618 }, + { 0x9017e, 0x109 }, + { 0x9017f, 0x8 }, + { 0x90180, 0xe0 }, + { 0x90181, 0x109 }, + { 0x90182, 0x0 }, + { 0x90183, 0x7c8 }, + { 0x90184, 0x109 }, + { 0x90185, 0x8 }, + { 0x90186, 0x8140 }, + { 0x90187, 0x10c }, + { 0x90188, 0x0 }, + { 0x90189, 0x1 }, + { 0x9018a, 0x8 }, + { 0x9018b, 0x8 }, + { 0x9018c, 0x4 }, + { 0x9018d, 0x8 }, + { 0x9018e, 0x8 }, + { 0x9018f, 0x7c8 }, + { 0x90190, 0x101 }, + { 0x90006, 0x0 }, + { 0x90007, 0x0 }, + { 0x90008, 0x8 }, + { 0x90009, 0x0 }, + { 0x9000a, 0x0 }, + { 0x9000b, 0x0 }, + { 0xd00e7, 0x400 }, + { 0x90017, 0x0 }, + { 0x9001f, 0x2b }, + { 0x90026, 0x6c }, + { 0x400d0, 0x0 }, + { 0x400d1, 0x101 }, + { 0x400d2, 0x105 }, + { 0x400d3, 0x107 }, + { 0x400d4, 0x10f }, + { 0x400d5, 0x202 }, + { 0x400d6, 0x20a }, + { 0x400d7, 0x20b }, + { 0x2003a, 0x2 }, + { 0x2000b, 0x64 }, + { 0x2000c, 0xc8 }, + { 0x2000d, 0x7d0 }, + { 0x2000e, 0x2c }, + { 0x12000b, 0x14 }, + { 0x12000c, 0x29 }, + { 0x12000d, 0x1a1 }, + { 0x12000e, 0x10 }, + { 0x22000b, 0x3 }, + { 0x22000c, 0x6 }, + { 0x22000d, 0x3e }, + { 0x22000e, 0x10 }, + { 0x9000c, 0x0 }, + { 0x9000d, 0x173 }, + { 0x9000e, 0x60 }, + { 0x9000f, 0x6110 }, + { 0x90010, 0x2152 }, + { 0x90011, 0xdfbd }, + { 0x90012, 0x60 }, + { 0x90013, 0x6152 }, + { 0x20010, 0x5a }, + { 0x20011, 0x3 }, + { 0x40080, 0xe0 }, + { 0x40081, 0x12 }, + { 0x40082, 0xe0 }, + { 0x40083, 0x12 }, + { 0x40084, 0xe0 }, + { 0x40085, 0x12 }, + { 0x140080, 0xe0 }, + { 0x140081, 0x12 }, + { 0x140082, 0xe0 }, + { 0x140083, 0x12 }, + { 0x140084, 0xe0 }, + { 0x140085, 0x12 }, + { 0x240080, 0xe0 }, + { 0x240081, 0x12 }, + { 0x240082, 0xe0 }, + { 0x240083, 0x12 }, + { 0x240084, 0xe0 }, + { 0x240085, 0x12 }, + { 0x400fd, 0xf }, + { 0x10011, 0x1 }, + { 0x10012, 0x1 }, + { 0x10013, 0x180 }, + { 0x10018, 0x1 }, + { 0x10002, 0x6209 }, + { 0x100b2, 0x1 }, + { 0x101b4, 0x1 }, + { 0x102b4, 0x1 }, + { 0x103b4, 0x1 }, + { 0x104b4, 0x1 }, + { 0x105b4, 0x1 }, + { 0x106b4, 0x1 }, + { 0x107b4, 0x1 }, + { 0x108b4, 0x1 }, + { 0x11011, 0x1 }, + { 0x11012, 0x1 }, + { 0x11013, 0x180 }, + { 0x11018, 0x1 }, + { 0x11002, 0x6209 }, + { 0x110b2, 0x1 }, + { 0x111b4, 0x1 }, + { 0x112b4, 0x1 }, + { 0x113b4, 0x1 }, + { 0x114b4, 0x1 }, + { 0x115b4, 0x1 }, + { 0x116b4, 0x1 }, + { 0x117b4, 0x1 }, + { 0x118b4, 0x1 }, + { 0x12011, 0x1 }, + { 0x12012, 0x1 }, + { 0x12013, 0x180 }, + { 0x12018, 0x1 }, + { 0x12002, 0x6209 }, + { 0x120b2, 0x1 }, + { 0x121b4, 0x1 }, + { 0x122b4, 0x1 }, + { 0x123b4, 0x1 }, + { 0x124b4, 0x1 }, + { 0x125b4, 0x1 }, + { 0x126b4, 0x1 }, + { 0x127b4, 0x1 }, + { 0x128b4, 0x1 }, + { 0x13011, 0x1 }, + { 0x13012, 0x1 }, + { 0x13013, 0x180 }, + { 0x13018, 0x1 }, + { 0x13002, 0x6209 }, + { 0x130b2, 0x1 }, + { 0x131b4, 0x1 }, + { 0x132b4, 0x1 }, + { 0x133b4, 0x1 }, + { 0x134b4, 0x1 }, + { 0x135b4, 0x1 }, + { 0x136b4, 0x1 }, + { 0x137b4, 0x1 }, + { 0x138b4, 0x1 }, + { 0x20089, 0x1 }, + { 0x20088, 0x19 }, + { 0xc0080, 0x2 }, + { 0xd0000, 0x1 }, +}; + +static struct dram_fsp_msg lpddr4_dram_fsp_msg[] = { + { + /* P0 3200mts 1D */ + .drate = 3200, + .fw_type = FW_1D_IMAGE, + .fsp_cfg = lpddr4_fsp0_cfg, + .fsp_cfg_num = ARRAY_SIZE(lpddr4_fsp0_cfg), + }, + { + /* P1 667mts 1D */ + .drate = 667, + .fw_type = FW_1D_IMAGE, + .fsp_cfg = lpddr4_fsp1_cfg, + .fsp_cfg_num = ARRAY_SIZE(lpddr4_fsp1_cfg), + }, + { + /* P0 3200mts 2D */ + .drate = 3200, + .fw_type = FW_2D_IMAGE, + .fsp_cfg = lpddr4_fsp0_2d_cfg, + .fsp_cfg_num = ARRAY_SIZE(lpddr4_fsp0_2d_cfg), + }, +}; + +/* lpddr4 timing config params on EVK board */ +struct dram_timing_info dram_timing_b0 = { + .ddrc_cfg = lpddr4_ddrc_cfg, + .ddrc_cfg_num = ARRAY_SIZE(lpddr4_ddrc_cfg), + .ddrphy_cfg = lpddr4_ddrphy_cfg, + .ddrphy_cfg_num = ARRAY_SIZE(lpddr4_ddrphy_cfg), + .fsp_msg = lpddr4_dram_fsp_msg, + .fsp_msg_num = ARRAY_SIZE(lpddr4_dram_fsp_msg), + .ddrphy_pie = lpddr4_phy_pie, + .ddrphy_pie_num = ARRAY_SIZE(lpddr4_phy_pie), + /* + * this table must be initialized if DDRPHY bypass mode is + * not used: all fsp drate > 666MTS. + */ + .fsp_table = { 3200, 667, }, +}; diff --git a/board/purism/librem5/spl.c b/board/purism/librem5/spl.c new file mode 100644 index 00000000000..1e8b2f473fa --- /dev/null +++ b/board/purism/librem5/spl.c @@ -0,0 +1,597 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018 NXP + * Copyright 2021 Purism + */ + +#include <common.h> +#include <asm/io.h> +#include <errno.h> +#include <asm/io.h> +#include <asm/arch/ddr.h> +#include <asm/arch/imx8mq_pins.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/clock.h> +#include <asm/mach-imx/boot_mode.h> +#include <asm/mach-imx/iomux-v3.h> +#include <asm/mach-imx/gpio.h> +#include <asm/mach-imx/mxc_i2c.h> +#include <fsl_esdhc_imx.h> +#include <mmc.h> +#include <power/pmic.h> +#include <power/bd71837.h> +#include <hang.h> +#include <init.h> +#include <spl.h> +#include <usb.h> +#include <dwc3-uboot.h> +#include <linux/delay.h> +#include "librem5.h" + +DECLARE_GLOBAL_DATA_PTR; + +void spl_dram_init(void) +{ + /* ddr init */ + if ((get_cpu_rev() & 0xfff) == CHIP_REV_2_1) + ddr_init(&dram_timing); + else + ddr_init(&dram_timing_b0); +} + +int spl_board_boot_device(enum boot_device boot_dev_spl) +{ + log_debug("%s : starting\n", __func__); + + switch (boot_dev_spl) { + case SD1_BOOT: + case MMC1_BOOT: + return BOOT_DEVICE_MMC1; + case USB_BOOT: + return BOOT_DEVICE_BOARD; + default: + return BOOT_DEVICE_NONE; + } +} + +#define ECSPI_PAD_CTRL (PAD_CTL_DSE2 | PAD_CTL_HYS) + +static const iomux_v3_cfg_t ecspi_pads[] = { + IMX8MQ_PAD_ECSPI1_SCLK__ECSPI1_SCLK | MUX_PAD_CTRL(ECSPI_PAD_CTRL), + IMX8MQ_PAD_ECSPI1_SS0__GPIO5_IO9 | MUX_PAD_CTRL(ECSPI_PAD_CTRL), + IMX8MQ_PAD_ECSPI1_MOSI__ECSPI1_MOSI | MUX_PAD_CTRL(ECSPI_PAD_CTRL), + IMX8MQ_PAD_ECSPI1_MISO__ECSPI1_MISO | MUX_PAD_CTRL(ECSPI_PAD_CTRL), +}; + +int board_ecspi_init(void) +{ + imx_iomux_v3_setup_multiple_pads(ecspi_pads, ARRAY_SIZE(ecspi_pads)); + + return 0; +} + +int board_spi_cs_gpio(unsigned int bus, unsigned int cs) +{ + return (bus == 0 && cs == 0) ? (SPI1_SS0) : -1; +} + +#define I2C_PAD_CTRL (PAD_CTL_PUE | PAD_CTL_ODE | PAD_CTL_DSE7 | PAD_CTL_FSEL3) +#define PC MUX_PAD_CTRL(I2C_PAD_CTRL) +struct i2c_pads_info i2c_pad_info1 = { + .scl = { + .i2c_mode = IMX8MQ_PAD_I2C1_SCL__I2C1_SCL | PC, + .gpio_mode = IMX8MQ_PAD_I2C1_SCL__GPIO5_IO14 | PC, + .gp = IMX_GPIO_NR(5, 14), + }, + .sda = { + .i2c_mode = IMX8MQ_PAD_I2C1_SDA__I2C1_SDA | PC, + .gpio_mode = IMX8MQ_PAD_I2C1_SDA__GPIO5_IO15 | PC, + .gp = IMX_GPIO_NR(5, 15), + }, +}; + +struct i2c_pads_info i2c_pad_info2 = { + .scl = { + .i2c_mode = IMX8MQ_PAD_I2C2_SCL__I2C2_SCL | PC, + .gpio_mode = IMX8MQ_PAD_I2C2_SCL__GPIO5_IO16 | PC, + .gp = IMX_GPIO_NR(5, 16), + }, + .sda = { + .i2c_mode = IMX8MQ_PAD_I2C2_SDA__I2C2_SDA | PC, + .gpio_mode = IMX8MQ_PAD_I2C2_SDA__GPIO5_IO17 | PC, + .gp = IMX_GPIO_NR(5, 17), + }, +}; + +struct i2c_pads_info i2c_pad_info3 = { + .scl = { + .i2c_mode = IMX8MQ_PAD_I2C3_SCL__I2C3_SCL | PC, + .gpio_mode = IMX8MQ_PAD_I2C3_SCL__GPIO5_IO18 | PC, + .gp = IMX_GPIO_NR(5, 18), + }, + .sda = { + .i2c_mode = IMX8MQ_PAD_I2C3_SDA__I2C3_SDA | PC, + .gpio_mode = IMX8MQ_PAD_I2C3_SDA__GPIO5_IO19 | PC, + .gp = IMX_GPIO_NR(5, 19), + }, +}; + +struct i2c_pads_info i2c_pad_info4 = { + .scl = { + .i2c_mode = IMX8MQ_PAD_I2C4_SCL__I2C4_SCL | PC, + .gpio_mode = IMX8MQ_PAD_I2C4_SCL__GPIO5_IO20 | PC, + .gp = IMX_GPIO_NR(5, 20), + }, + .sda = { + .i2c_mode = IMX8MQ_PAD_I2C4_SDA__I2C4_SDA | PC, + .gpio_mode = IMX8MQ_PAD_I2C4_SDA__GPIO5_IO21 | PC, + .gp = IMX_GPIO_NR(5, 21), + }, +}; + +#define UART_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_FSEL1) + +static const iomux_v3_cfg_t uart_pads[] = { + IMX8MQ_PAD_UART1_RXD__UART1_RX | MUX_PAD_CTRL(UART_PAD_CTRL), + IMX8MQ_PAD_UART1_TXD__UART1_TX | MUX_PAD_CTRL(UART_PAD_CTRL), + IMX8MQ_PAD_UART2_RXD__UART2_RX | MUX_PAD_CTRL(UART_PAD_CTRL), + IMX8MQ_PAD_UART2_TXD__UART2_TX | MUX_PAD_CTRL(UART_PAD_CTRL), + IMX8MQ_PAD_UART3_RXD__UART3_RX | MUX_PAD_CTRL(UART_PAD_CTRL), + IMX8MQ_PAD_UART3_TXD__UART3_TX | MUX_PAD_CTRL(UART_PAD_CTRL), + IMX8MQ_PAD_ECSPI2_SCLK__UART4_RX | MUX_PAD_CTRL(UART_PAD_CTRL), + IMX8MQ_PAD_ECSPI2_MOSI__UART4_TX | MUX_PAD_CTRL(UART_PAD_CTRL), +}; + +#define USDHC1_PWR_GPIO IMX_GPIO_NR(2, 10) +#define USDHC2_PWR_GPIO IMX_GPIO_NR(2, 19) + +int board_mmc_getcd(struct mmc *mmc) +{ + struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; + int ret = 0; + + switch (cfg->esdhc_base) { + case USDHC1_BASE_ADDR: + ret = 1; + break; + case USDHC2_BASE_ADDR: + ret = 1; + break; + } + + return ret; +} + +#define USDHC_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_HYS | PAD_CTL_PUE | \ + PAD_CTL_FSEL1) +#define USDHC_GPIO_PAD_CTRL (PAD_CTL_PUE | PAD_CTL_DSE1) + +static const iomux_v3_cfg_t usdhc1_pads[] = { + IMX8MQ_PAD_SD1_CLK__USDHC1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), + IMX8MQ_PAD_SD1_CMD__USDHC1_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), + IMX8MQ_PAD_SD1_DATA0__USDHC1_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + IMX8MQ_PAD_SD1_DATA1__USDHC1_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + IMX8MQ_PAD_SD1_DATA2__USDHC1_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + IMX8MQ_PAD_SD1_DATA3__USDHC1_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + IMX8MQ_PAD_SD1_DATA4__USDHC1_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + IMX8MQ_PAD_SD1_DATA5__USDHC1_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + IMX8MQ_PAD_SD1_DATA6__USDHC1_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + IMX8MQ_PAD_SD1_DATA7__USDHC1_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + IMX8MQ_PAD_SD1_RESET_B__GPIO2_IO10 | MUX_PAD_CTRL(NO_PAD_CTRL), +}; + +static const iomux_v3_cfg_t usdhc2_pads[] = { + IMX8MQ_PAD_SD2_CLK__USDHC2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), /* 0xd6 */ + IMX8MQ_PAD_SD2_CMD__USDHC2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), /* 0xd6 */ + IMX8MQ_PAD_SD2_DATA0__USDHC2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), /* 0xd6 */ + IMX8MQ_PAD_SD2_DATA1__USDHC2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), /* 0xd6 */ + IMX8MQ_PAD_SD2_DATA2__USDHC2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), /* 0x16 */ + IMX8MQ_PAD_SD2_DATA3__USDHC2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), /* 0xd6 */ + IMX8MQ_PAD_SD2_RESET_B__GPIO2_IO19 | MUX_PAD_CTRL(USDHC_GPIO_PAD_CTRL), +}; + +static struct fsl_esdhc_cfg usdhc_cfg[2] = { + {USDHC1_BASE_ADDR, 0, 8}, + {USDHC2_BASE_ADDR, 0, 4}, +}; + +int board_mmc_init(struct bd_info *bis) +{ + int i, ret; + /* + * According to the board_mmc_init() the following map is done: + * (U-Boot device node) (Physical Port) + * mmc0 USDHC1 + * mmc1 USDHC2 + */ + for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) { + log_debug("Initializing FSL USDHC port %d\n", i); + switch (i) { + case 0: + init_clk_usdhc(0); + usdhc_cfg[0].sdhc_clk = mxc_get_clock(USDHC1_CLK_ROOT); + imx_iomux_v3_setup_multiple_pads(usdhc1_pads, + ARRAY_SIZE(usdhc1_pads)); + gpio_request(USDHC1_PWR_GPIO, "usdhc1_reset"); + gpio_direction_output(USDHC1_PWR_GPIO, 0); + udelay(500); + gpio_direction_output(USDHC1_PWR_GPIO, 1); + break; + case 1: + init_clk_usdhc(1); + usdhc_cfg[1].sdhc_clk = mxc_get_clock(USDHC2_CLK_ROOT); + imx_iomux_v3_setup_multiple_pads(usdhc2_pads, + ARRAY_SIZE(usdhc2_pads)); + gpio_request(USDHC2_PWR_GPIO, "usdhc2_reset"); + gpio_direction_output(USDHC2_PWR_GPIO, 0); + udelay(500); + gpio_direction_output(USDHC2_PWR_GPIO, 1); + break; + default: + log_err("Warning: USDHC controller(%d) not supported\n", i + 1); + return -EINVAL; + } + + ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]); + if (ret) + return ret; + } + + return 0; +} + +#define LDO_VOLT_EN BIT(6) + +/* + * Disable the charger - it will be re-enabled in u-boot + */ +void disable_charger_bq25896(void) +{ + u8 val; + int timeout = 1000; // ms + + /* Set the i2c bus */ + i2c_set_bus_num(3); + + /* disable ship mode if BATFET_DLY is set */ + val = i2c_reg_read(0x6a, 0x09); + log_debug("REG09 0x%x\n", val); + if (val & 0x28) { + val = val & ~0x28; + i2c_reg_write(0x6a, 0x09, val); + } + + /* disable and trigger DPDM, ICO, HVDCP and MaxCharge */ + val = i2c_reg_read(0x6a, 0x02); + log_debug("REG02 0x%x\n", val); + val &= 0xe0; + i2c_reg_write(0x6a, 0x02, val); + + /* disable charger and enable BAT_LOADEN */ + val = i2c_reg_read(0x6a, 0x03); + log_debug("REG03 0x%x\n", val); + val = (val | 0x80) & ~0x10; + i2c_reg_write(0x6a, 0x03, val); + + mdelay(10); + + /* force ADC conversions */ + val = i2c_reg_read(0x6a, 0x02); + log_debug("REG02 0x%x\n", val); + val = (val | 0x80) & ~0x40; + i2c_reg_write(0x6a, 0x02, val); + + do { + mdelay(10); + timeout -= 10; + } while ((i2c_reg_read(0x6a, 0x02) & 0x80) && (timeout > 0)); + + /* enable STAT pin */ + val = i2c_reg_read(0x6a, 0x07); + log_debug("REG07 0x%x\n", val); + val = val & ~0x40; + i2c_reg_write(0x6a, 0x07, val); + + /* check VBUS */ + val = i2c_reg_read(0x6a, 0x11); + log_debug("VBUS good %d\n", (val >> 7) & 1); + log_debug("VBUS mV %d\n", (val & 0x7f) * 100 + 2600); + + /* check VBAT */ + val = i2c_reg_read(0x6a, 0x0e); + log_debug("VBAT mV %d\n", (val & 0x7f) * 20 + 2304); + + /* limit the VINDPM to 3.9V */ + i2c_reg_write(0x6a, 0x0d, 0x8d); + + /* set the max voltage to 4.192V */ + val = i2c_reg_read(0x6a, 0x6); + val = (val & ~0xFC) | 0x16 << 2; + i2c_reg_write(0x6a, 0x6, val); + + /* set the SYS_MIN to 3.7V */ + val = i2c_reg_read(0x6a, 0x3); + val = val | 0xE; + i2c_reg_write(0x6a, 0x3, val); + + /* disable BAT_LOADEN */ + val = i2c_reg_read(0x6a, 0x03); + log_debug("REG03 0x%x\n", val); + val = val & ~0x80; + i2c_reg_write(0x6a, 0x03, val); +} + +#define I2C_PMIC 0 + +int power_bd71837_init(unsigned char bus) +{ + static const char name[] = BD718XX_REGULATOR_DRIVER; + struct pmic *p = pmic_alloc(); + + if (!p) { + log_err("%s: POWER allocation error!\n", __func__); + return -ENOMEM; + } + + p->name = name; + p->interface = I2C_PMIC; + p->number_of_regs = BD718XX_MAX_REGISTER; + p->hw.i2c.addr = CONFIG_POWER_BD71837_I2C_ADDR; + p->hw.i2c.tx_num = 1; + p->bus = bus; + + return 0; +} + +int power_init_board(void) +{ + struct pmic *p; + int ldo[] = {BD718XX_LDO5_VOLT, BD718XX_LDO6_VOLT, + BD71837_LDO7_VOLT}; + u32 val; + int i, rv; + + /* Set the i2c bus */ + setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1); + + /* + * Init PMIC + */ + rv = power_bd71837_init(CONFIG_POWER_BD71837_I2C_BUS); + if (rv) { + log_err("%s: power_bd71837_init(%d) error %d\n", __func__, + CONFIG_POWER_BD71837_I2C_BUS, rv); + goto out; + } + + p = pmic_get(BD718XX_REGULATOR_DRIVER); + if (!p) { + log_err("%s: pmic_get(%s) failed\n", __func__, BD718XX_REGULATOR_DRIVER); + rv = -ENODEV; + goto out; + } + + rv = pmic_probe(p); + if (rv) { + log_err("%s: pmic_probe() error %d\n", __func__, rv); + goto out; + } + + /* + * Unlock all regs + */ + pmic_reg_write(p, BD718XX_REGLOCK, 0); + + /* find the reset cause */ + pmic_reg_read(p, 0x29, &val); + log_debug("%s: reset cause %d\n", __func__, val); + + /* + * Reconfigure default voltages and disable: + * - BUCK3: VDD_GPU_0V9 (1.00 -> 0.90) + * - BUCK4: VDD_VPU_0V9 (1.00 -> 0.90) + */ + pmic_reg_write(p, BD71837_BUCK3_VOLT_RUN, 0x14); + pmic_reg_write(p, BD71837_BUCK4_VOLT_RUN, 0x14); + + /* + * Enable PHYs voltages: LDO5-7 + */ + for (i = 0; i < ARRAY_SIZE(ldo); i++) { + rv = pmic_reg_read(p, ldo[i], &val); + if (rv) { + log_err("%s: pmic_read(%x) error %d\n", __func__, + ldo[i], rv); + continue; + } + + pmic_reg_write(p, ldo[i], val | LDO_VOLT_EN); + } + + udelay(500); + + rv = 0; +out: + return rv; +} + +int usb_gadget_handle_interrupts(void) +{ + dwc3_uboot_handle_interrupt(0); + return 0; +} + +static void dwc3_nxp_usb_phy_init(struct dwc3_device *dwc3) +{ + u32 RegData; + + RegData = readl(dwc3->base + USB_PHY_CTRL1); + RegData &= ~(USB_PHY_CTRL1_VDATSRCENB0 | USB_PHY_CTRL1_VDATDETENB0 | + USB_PHY_CTRL1_COMMONONN); + RegData |= USB_PHY_CTRL1_RESET | USB_PHY_CTRL1_ATERESET; + writel(RegData, dwc3->base + USB_PHY_CTRL1); + + RegData = readl(dwc3->base + USB_PHY_CTRL0); + RegData |= USB_PHY_CTRL0_REF_SSP_EN; + RegData &= ~USB_PHY_CTRL0_SSC_RANGE_MASK; + RegData |= USB_PHY_CTRL0_SSC_RANGE_4003PPM; + writel(RegData, dwc3->base + USB_PHY_CTRL0); + + RegData = readl(dwc3->base + USB_PHY_CTRL2); + RegData |= USB_PHY_CTRL2_TXENABLEN0; + writel(RegData, dwc3->base + USB_PHY_CTRL2); + + RegData = readl(dwc3->base + USB_PHY_CTRL1); + RegData &= ~(USB_PHY_CTRL1_RESET | USB_PHY_CTRL1_ATERESET); + writel(RegData, dwc3->base + USB_PHY_CTRL1); + + /* Disable rx term override */ + RegData = readl(dwc3->base + USB_PHY_CTRL6); + RegData &= ~USB_PHY_CTRL6_RXTERM_OVERRIDE_SEL; + writel(RegData, dwc3->base + USB_PHY_CTRL6); +} + +static struct dwc3_device dwc3_device0_data = { + .maximum_speed = USB_SPEED_HIGH, + .base = USB1_BASE_ADDR, + .dr_mode = USB_DR_MODE_PERIPHERAL, + .index = 0, +}; + +static struct dwc3_device dwc3_device1_data = { + .maximum_speed = USB_SPEED_HIGH, + .base = USB2_BASE_ADDR, + .dr_mode = USB_DR_MODE_HOST, + .index = 1, +}; + +int board_usb_init(int index, enum usb_init_type init) +{ + int ret = 0; + + printf("%s : index %d type %d\n", __func__, index, init); + + imx8m_usb_power(index, true); + + if (index == 0 && init == USB_INIT_DEVICE) { + dwc3_nxp_usb_phy_init(&dwc3_device0_data); + ret = dwc3_uboot_init(&dwc3_device0_data); + } + if (index == 1 && init == USB_INIT_HOST) { + dwc3_nxp_usb_phy_init(&dwc3_device1_data); + ret = dwc3_uboot_init(&dwc3_device1_data); + } + + return ret; +} + +int board_usb_cleanup(int index, enum usb_init_type init) +{ + u32 RegData; + struct dwc3_device *dwc3; + + printf("%s : %d\n", __func__, index); + + if (index == 0 && init == USB_INIT_DEVICE) + dwc3 = &dwc3_device0_data; + if (index == 1 && init == USB_INIT_HOST) + dwc3 = &dwc3_device1_data; + + dwc3_uboot_exit(index); + + /* reset the phy */ + RegData = readl(dwc3->base + USB_PHY_CTRL1); + RegData &= ~(USB_PHY_CTRL1_VDATSRCENB0 | USB_PHY_CTRL1_VDATDETENB0 | + USB_PHY_CTRL1_COMMONONN); + RegData |= USB_PHY_CTRL1_RESET | USB_PHY_CTRL1_ATERESET; + writel(RegData, dwc3->base + USB_PHY_CTRL1); + + /* enable rx term override */ + RegData = readl(dwc3->base + USB_PHY_CTRL6); + RegData |= USB_PHY_CTRL6_RXTERM_OVERRIDE_SEL; + writel(RegData, dwc3->base + USB_PHY_CTRL6); + + imx8m_usb_power(index, false); + + return 0; +} + +void spl_board_init(void) +{ + if (is_usb_boot()) + puts("USB Boot\n"); + else + puts("Normal Boot\n"); +} + +void board_boot_order(u32 *spl_boot_list) +{ + if (is_usb_boot()) + spl_boot_list[0] = BOOT_DEVICE_BOARD; + else + spl_boot_list[0] = BOOT_DEVICE_MMC1; +} + +#define WDOG_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_HYS | PAD_CTL_PUE) + +static const iomux_v3_cfg_t wdog_pads[] = { + IMX8MQ_PAD_GPIO1_IO02__WDOG1_WDOG_B | MUX_PAD_CTRL(WDOG_PAD_CTRL), +}; + +void board_init_f(ulong dummy) +{ + int ret; + struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR; + + arch_cpu_init(); + + imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads)); + set_wdog_reset(wdog); + + init_uart_clk(CONSOLE_UART_CLK); + imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads)); + +#ifdef CONSOLE_ON_UART4 + gpio_request(WIFI_EN, "WIFI_EN"); + gpio_direction_output(WIFI_EN, 1); +#endif + + board_early_init_f(); + + timer_init(); + + preloader_console_init(); + + ret = spl_init(); + if (ret) { + log_err("spl_init() failed: %d\n", ret); + hang(); + } + + enable_tzc380(); + + printf("Initializing pinmux\n"); + init_pinmux(); + gpio_direction_output(LED_G, 1); + gpio_direction_output(MOTO, 1); + mdelay(50); + gpio_direction_output(MOTO, 0); + + /* Enable and configure i2c buses not used below */ + setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2); + setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info3); + setup_i2c(3, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info4); + + power_init_board(); + + disable_charger_bq25896(); + + /* initialize this for M4 even if u-boot doesn't have SF_CMD */ + printf("Initializing ECSPI\n"); + board_ecspi_init(); + + /* DDR initialization */ + printf("Initializing DRAM\n"); + spl_dram_init(); +} + diff --git a/configs/librem5_defconfig b/configs/librem5_defconfig new file mode 100644 index 00000000000..6153a9b90a6 --- /dev/null +++ b/configs/librem5_defconfig @@ -0,0 +1,139 @@ +CONFIG_ARM=y +CONFIG_ARCH_IMX8M=y +CONFIG_SYS_TEXT_BASE=0x40200000 +CONFIG_SPL_GPIO=y +CONFIG_SPL_LIBCOMMON_SUPPORT=y +CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_ENV_SIZE=0x2000 +CONFIG_ENV_OFFSET=0x3FE000 +CONFIG_SYS_I2C_MXC_I2C1=y +CONFIG_SYS_I2C_MXC_I2C2=y +CONFIG_SYS_I2C_MXC_I2C3=y +CONFIG_SYS_I2C_MXC_I2C4=y +CONFIG_DM_GPIO=y +CONFIG_DEFAULT_DEVICE_TREE="imx8mq-librem5-r4" +CONFIG_SPL_TEXT_BASE=0x7E1000 +CONFIG_TARGET_LIBREM5=y +CONFIG_SPL_MMC=y +CONFIG_SPL_SERIAL=y +CONFIG_SPL_DRIVERS_MISC=y +CONFIG_SPL=y +CONFIG_IMX_BOOTAUX=y +CONFIG_DISTRO_DEFAULTS=y +CONFIG_SYS_LOAD_ADDR=0x40480000 +CONFIG_FIT=y +CONFIG_FIT_EXTERNAL_OFFSET=0x3000 +CONFIG_SPL_LOAD_FIT=y +# CONFIG_USE_SPL_FIT_GENERATOR is not set +CONFIG_OF_SYSTEM_SETUP=y +CONFIG_SYS_CONSOLE_IS_IN_ENV=y +# CONFIG_SYS_DEVICE_NULLDEV is not set +CONFIG_ARCH_MISC_INIT=y +CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_BOARD_LATE_INIT=y +CONFIG_SPL_BOARD_INIT=y +CONFIG_SPL_SEPARATE_BSS=y +CONFIG_SPL_I2C=y +CONFIG_SPL_POWER=y +CONFIG_SPL_USB_GADGET=y +CONFIG_SPL_USB_SDP_SUPPORT=y +CONFIG_SPL_WATCHDOG=y +CONFIG_CMD_MEMTEST=y +CONFIG_CMD_FUSE=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_USB=y +CONFIG_CMD_USB_SDP=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_REGULATOR=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_OF_CONTROL=y +CONFIG_SPL_OF_CONTROL=y +CONFIG_ENV_IS_IN_MMC=y +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y +CONFIG_SPL_DM=y +# CONFIG_SPL_BLK is not set +CONFIG_BUTTON=y +CONFIG_BUTTON_GPIO=y +CONFIG_SAVED_DRAM_TIMING_BASE=0x40000000 +CONFIG_DMA=y +CONFIG_DMA_CHANNELS=y +CONFIG_USB_FUNCTION_FASTBOOT=y +CONFIG_FASTBOOT_BUF_ADDR=0x43000000 +CONFIG_FASTBOOT_BUF_SIZE=0x40000000 +CONFIG_FASTBOOT_FLASH=y +CONFIG_FASTBOOT_UUU_SUPPORT=y +CONFIG_FASTBOOT_FLASH_MMC_DEV=0 +CONFIG_FASTBOOT_MMC_BOOT_SUPPORT=y +CONFIG_FASTBOOT_MMC_USER_SUPPORT=y +CONFIG_FASTBOOT_CMD_OEM_PARTCONF=y +CONFIG_FASTBOOT_CMD_OEM_BOOTBUS=y +# CONFIG_SPL_DM_GPIO is not set +CONFIG_GPIO_HOG=y +CONFIG_DM_GPIO_LOOKUP_LABEL=y +CONFIG_MXC_GPIO=y +CONFIG_DM_I2C=y +# CONFIG_SPL_DM_I2C is not set +CONFIG_SPL_SYS_I2C_LEGACY=y +CONFIG_SYS_I2C_EARLY_INIT=y +CONFIG_SYS_MXC_I2C1_SPEED=50000 +CONFIG_SYS_MXC_I2C2_SPEED=50000 +CONFIG_SYS_MXC_I2C3_SPEED=50000 +CONFIG_SYS_MXC_I2C4_SPEED=50000 +CONFIG_SYS_I2C_SPEED=50000 +CONFIG_LED=y +CONFIG_LED_BLINK=y +CONFIG_LED_GPIO=y +CONFIG_MISC=y +CONFIG_PWRSEQ=y +CONFIG_MMC_BROKEN_CD=y +# CONFIG_SPL_DM_MMC is not set +CONFIG_SUPPORT_EMMC_BOOT=y +CONFIG_MMC_IO_VOLTAGE=y +CONFIG_MMC_UHS_SUPPORT=y +CONFIG_MMC_HS400_ES_SUPPORT=y +CONFIG_MMC_HS400_SUPPORT=y +CONFIG_FSL_USDHC=y +CONFIG_DM_SPI_FLASH=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_WINBOND=y +CONFIG_DM_ETH=y +CONFIG_PHY=y +CONFIG_PHY_IMX8MQ_USB=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_IMX8M=y +CONFIG_POWER_LEGACY=y +CONFIG_POWER_DOMAIN=y +CONFIG_IMX8M_POWER_DOMAIN=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_REGULATOR_GPIO=y +CONFIG_POWER_I2C=y +CONFIG_DM_RESET=y +CONFIG_MXC_UART=y +CONFIG_SPI=y +CONFIG_DM_SPI=y +CONFIG_MXC_SPI=y +CONFIG_DM_THERMAL=y +CONFIG_IMX_TMU=y +CONFIG_USB=y +CONFIG_DM_USB_GADGET=y +# CONFIG_SPL_DM_USB_GADGET is not set +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +CONFIG_USB_DWC3=y +CONFIG_USB_DWC3_GENERIC=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_MANUFACTURER="Purism" +CONFIG_USB_GADGET_VENDOR_NUM=0x0525 +CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 +CONFIG_SDP_LOADADDR=0x40400000 +CONFIG_USB_FUNCTION_ACM=y + +CONFIG_SYS_CLK_FREQ=0 +CONFIG_CLK=y +CONFIG_CMD_CLK=y +CONFIG_CLK_IMX8MQ=y +CONFIG_CLK_COMPOSITE_CCF=y diff --git a/doc/board/index.rst b/doc/board/index.rst index be9ba4de4d0..c64a4f519b1 100644 --- a/doc/board/index.rst +++ b/doc/board/index.rst @@ -25,6 +25,7 @@ Board-specific doc nokia/index nxp/index openpiton/index + purism/index qualcomm/index rockchip/index samsung/index diff --git a/doc/board/purism/index.rst b/doc/board/purism/index.rst new file mode 100644 index 00000000000..a9cdc312d46 --- /dev/null +++ b/doc/board/purism/index.rst @@ -0,0 +1,9 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +Purism SPC +========== + +.. toctree:: + :maxdepth: 2 + + librem5 diff --git a/doc/board/purism/librem5.rst b/doc/board/purism/librem5.rst new file mode 100644 index 00000000000..193a0c08f47 --- /dev/null +++ b/doc/board/purism/librem5.rst @@ -0,0 +1,60 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +Librem5 +========== + +U-Boot for the Purism Librem5 phone + +Quick Start +----------- + +- Build the ARM Trusted firmware binary +- Get ddr and hdmi firmware +- Build U-Boot + +Get and Build the ARM Trusted firmware +-------------------------------------- + +Note: srctree is U-Boot source directory +Get ATF from: https://source.puri.sm/Librem5/arm-trusted-firmware +branch: librem5 + +.. code-block:: bash + + $ make PLAT=imx8mq CROSS_COMPILE=aarch64-linux-gnu- bl31 + $ cp build/imx8mq/release/bl31.bin $(builddir) + +Get the ddr and hdmi firmware +----------------------------- + +.. code-block:: bash + + $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.10.bin + $ chmod +x firmware-imx-8.10.bin + $ ./firmware-imx-8.10.bin + $ cp firmware-imx-8.10/firmware/hdmi/cadence/signed_hdmi_imx8m.bin $(builddir) + $ cp firmware-imx-8.10/firmware/ddr/synopsys/lpddr4*.bin $(builddir) + +Build U-Boot +------------ + +.. code-block:: bash + + $ export CROSS_COMPILE=aarch64-linux-gnu- + $ make librem5_defconfig + $ make ARCH=arm + +Burn the flash.bin +------------------ + +Use uuu to burn flash.bin. Power on the phone while holding vol+ to get it +into uuu mode. + +.. code-block:: bash + + $ git clone https://source.puri.sm/Librem5/librem5-devkit-tools.git + $ cd librem5-devkit-tools + $ cp $(builddir)/flash.bin files/u-boot-librem5.imx + $ uuu uuu_scripts/u-boot_flash_librem5.lst + +Reboot the phone. diff --git a/include/configs/librem5.h b/include/configs/librem5.h new file mode 100644 index 00000000000..c44032d5287 --- /dev/null +++ b/include/configs/librem5.h @@ -0,0 +1,151 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2017 NXP + * Copyright 2018 Emcraft Systems + * Copyright 2019 Purism + * + */ + +#ifndef __LIBREM5_H +#define __LIBREM5_H + +/* #define DEBUG */ + +#include <version.h> +#include <linux/sizes.h> +#include <asm/arch/imx-regs.h> + +#ifdef CONFIG_SECURE_BOOT +#define CONFIG_CSF_SIZE 0x2000 /* 8K region */ +#endif + +#define CONFIG_SPL_MAX_SIZE (148 * 1024) +#define CONFIG_SYS_MONITOR_LEN (512 * 1024) +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 + +#ifdef CONFIG_SPL_BUILD +#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds" +#define CONFIG_SPL_STACK 0x187FF0 +#define CONFIG_SPL_BSS_START_ADDR 0x00180000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x2000 /* 8 KB */ +#define CONFIG_SPL_STACK_R_ADDR 0x42300000 +#define CONFIG_SPL_STACK_R +#define CONFIG_SYS_SPL_MALLOC_START 0x42200000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 /* 512 KB */ + +#define CONFIG_SYS_MALLOC_F_LEN 0x2000 +#define CONFIG_MALLOC_F_ADDR 0x182000 /* malloc f used before GD_FLG_FULL_MALLOC_INIT */ + +#define CONFIG_SPL_ABORT_ON_RAW_IMAGE /* For RAW image gives a error info not panic */ + +#undef CONFIG_DEVRES +#undef CONFIG_DM_USB +#undef CONFIG_USB_DWC3_GENERIC + +#define CONFIG_POWER_BD71837 +#define CONFIG_POWER_BD71837_I2C_BUS 0 +#define CONFIG_POWER_BD71837_I2C_ADDR 0x4B + +#endif /* CONFIG_SPL_BUILD*/ + +#define CONFIG_SYS_FSL_USDHC_NUM 2 + +#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 + +#define CONFIG_USBD_HS + +#define CONFIG_USB_GADGET_VBUS_DRAW 2 + +#define CONSOLE_ON_UART1 +#define CONFIG_BAUDRATE 115200 + +#ifdef CONSOLE_ON_UART1 +#define CONFIG_MXC_UART_BASE UART1_BASE_ADDR +#define CONSOLE_UART_CLK 0 +#define CONSOLE "ttymxc0" +#elif defined(CONSOLE_ON_UART2) +#define CONFIG_MXC_UART_BASE UART2_BASE_ADDR +#define CONSOLE_UART_CLK 1 +#define CONSOLE "ttymxc1" +#elif defined(CONSOLE_ON_UART3) +#define CONFIG_MXC_UART_BASE UART3_BASE_ADDR +#define CONSOLE_UART_CLK 2 +#define CONSOLE "ttymxc2" +#elif defined(CONSOLE_ON_UART4) +#define CONFIG_MXC_UART_BASE UART4_BASE_ADDR +#define CONSOLE_UART_CLK 3 +#define CONSOLE "ttymxc3" +#else +#define CONFIG_MXC_UART_BASE UART1_BASE_ADDR +#define CONSOLE_UART_CLK 0 +#define CONSOLE "ttymxc0" +#endif + +#define CONFIG_REMAKE_ELF + +#define CONFIG_BOARD_POSTCLK_INIT + +/* Flat Device Tree Definitions */ +#define CONFIG_OF_BOARD_SETUP + +#ifndef CONFIG_SPL_BUILD +#define BOOT_TARGET_DEVICES(func) \ + func(MMC, mmc, 0) \ + func(USB, usb, 0) \ + func(DHCP, dhcp, na) +#include <config_distro_bootcmd.h> +#else +#define BOOTENV +#endif + +/* Initial environment variables */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "scriptaddr=0x80000000\0" \ + "pxefile_addr_r=0x80100000\0" \ + "kernel_addr_r=0x80800000\0" \ + "fdt_addr_r=0x83000000\0" \ + "ramdisk_addr_r=0x83800000\0" \ + "console=" CONSOLE ",115200\0" \ + "bootargs=u_boot_version=" PLAIN_VERSION "\0" \ + "stdin=usbacm,serial\0" \ + "stdout=usbacm,serial\0" \ + "stderr=usbacm,serial\0" \ + BOOTENV + +/* Link Definitions */ +#define CONFIG_SYS_TEXT_BASE 0x40200000 + +#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 +#define CONFIG_SYS_INIT_RAM_SIZE 0x80000 +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + +#define CONFIG_ENV_OVERWRITE +#define CONFIG_MMCROOT "/dev/mmcblk0p2" /* USDHC1 */ + +#define CONFIG_SYS_SDRAM_BASE 0x40000000 +#define PHYS_SDRAM 0x40000000 +#define PHYS_SDRAM_SIZE 0xc0000000 /* 3GB LPDDR4 one Rank */ + +#define CONFIG_SYS_ALT_MEMTEST + +/* Monitor Command Prompt */ +#undef CONFIG_SYS_PROMPT +#define CONFIG_SYS_PROMPT "u-boot=> " +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_CBSIZE 1024 +#define CONFIG_SYS_MAXARGS 64 +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_FSL_ESDHC_ADDR 0 + +#ifdef CONFIG_CMD_SF +#define CONFIG_SF_DEFAULT_BUS 0 +#define CONFIG_SF_DEFAULT_CS 0 +#endif +#endif -- 2.25.1

2 2

[PATCH 0/5] Reduce size of a few boards
by Simon Glass 20 Apr '22

20 Apr '22

This series is intended to be applied before with EFI clean-up series from Takahiro-san. It reduces the size of a few boards by removing features. It also allows the partition driver to be dropped in SPL, thus eliminating the SPL size gains. The helper-function patch must be applied after the EFI series, but the others can come before. Simon Glass (5): disk: Add an option for partitions in SPL tbs2910: Disable ext4 write rcar3_salvator-x: Drop EFI_LOADER phycore-rk3288: Avoid enabling partition support in SPL disk: Use a helper function to reduce duplication configs/phycore-rk3288_defconfig | 2 +- configs/rcar3_salvator-x_defconfig | 2 +- configs/tbs2910_defconfig | 1 - disk/Kconfig | 24 +++++++++++++--- disk/Makefile | 6 ++-- disk/disk-uclass.c | 46 ++++++++++++++++-------------- drivers/block/blk-uclass.c | 2 +- 7 files changed, 51 insertions(+), 32 deletions(-) -- 2.35.1.723.g4982287a31-goog

5 23