February 2022 - U-Boot

[PATCH] net: ti: am65-cpsw: Cleanup resources before jump to kernel
by Vignesh Raghavendra 04 Feb '22

04 Feb '22

In case fastboot over Ethernet, am65_cpsw_stop() is not called unless DM_FLAG_OS_PREPARE is set. Without call to am65_cpsw_stop(), DMA resources are not released thus leading to failures in kernel. Fix this by adding DM_FLAG_OS_PREPARE flag to am65_cpsw_nuss_port driver. Reported-by: Christian Gmeiner <christian.gmeiner(a)gmail.com> Signed-off-by: Vignesh Raghavendra <vigneshr(a)ti.com> --- drivers/net/ti/am65-cpsw-nuss.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ti/am65-cpsw-nuss.c b/drivers/net/ti/am65-cpsw-nuss.c index 454986ff15..87f51b3b99 100644 --- a/drivers/net/ti/am65-cpsw-nuss.c +++ b/drivers/net/ti/am65-cpsw-nuss.c @@ -817,5 +817,5 @@ U_BOOT_DRIVER(am65_cpsw_nuss_port) = { .ops = &am65_cpsw_ops, .priv_auto = sizeof(struct am65_cpsw_priv), .plat_auto = sizeof(struct eth_pdata), - .flags = DM_FLAG_ALLOC_PRIV_DMA, + .flags = DM_FLAG_ALLOC_PRIV_DMA | DM_FLAG_OS_PREPARE, }; -- 2.35.0

3 2

[PATCH] scripts: Makefile: also clean subdir dtc
by Philippe Reynes 04 Feb '22

04 Feb '22

Since commit 93b196532254 ("Makefile: Only build dtc if needed"), the sub directory scripts/dtc is never cleaned. Adds the directory dtc to subdir to always clean it. Signed-off-by: Philippe Reynes <philippe.reynes(a)softathome.com> --- scripts/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/scripts/Makefile b/scripts/Makefile index cfe9fef804..8731e6cecd 100644 --- a/scripts/Makefile +++ b/scripts/Makefile @@ -9,4 +9,4 @@ hostprogs-$(CONFIG_BUILD_BIN2C) += bin2c always := $(hostprogs-y) # Let clean descend into subdirs -subdir- += basic kconfig +subdir- += basic kconfig dtc -- 2.17.1

3 2

[PATCH] armv8: start.S: remove CONFIG_SYS_RESET_SCTRL code
by Andre Przywara 04 Feb '22

04 Feb '22

There is some code that tries to "reset" the SCTLR_ELx register early in the boot process. The idea seems to be to guarantee some sane settings that U-Boot actually relies on, for instance running in little-endian mode, with the MMU off initially. However the current code has multiple problems: - For a start, no platform or config defines the symbol that would enable that code. - The code itself really only works if the bits that it tries to clear are already cleared: - If we run in big-endian mode initially, any previous loads would have been wrong already. That applies to the (optional) relocation code, but more prominently to the mask that it uses to clear those bits: "ldr x1, =0xfdfffffa" looks innocent, but actually involves a memory access to the literal pool, using the current endianess. - If we run with the MMU enabled, we are probably doomed already. We *could* hope that we are running with an identity mapping, but would need to do some cache maintenance to avoid losing dirty cache lines. - The idea of doing a read-modify-write of SCTLR is somewhat questionable to begin with, because as the owner of the current exception level we should initialise all bits of this register with a certain fixed value. - The code is unnecessarily complicated, and the function name is misspelled. While those problems *could* admittedly be fixed, the point that is does not seem to be used at all at the moment tells me we should just remove this code, and be it to not give a bad example. If people care, I could introduce some proper SCTLR initialisation code. We are about to work this out for the boot-wrapper[1] as we speak, but apparently we got away without doing this in U-Boot ever since, so it might not be worth the potential trouble. [1] https://lore.kernel.org/linux-arm-kernel/20220114105653.3003399-7-mark.rutl… Signed-off-by: Andre Przywara <andre.przywara(a)arm.com> --- arch/arm/cpu/armv8/start.S | 37 ------------------------------------- 1 file changed, 37 deletions(-) diff --git a/arch/arm/cpu/armv8/start.S b/arch/arm/cpu/armv8/start.S index b3eef705a5..91b00a46cc 100644 --- a/arch/arm/cpu/armv8/start.S +++ b/arch/arm/cpu/armv8/start.S @@ -104,10 +104,6 @@ pie_skip_reloc: pie_fixup_done: #endif -#ifdef CONFIG_SYS_RESET_SCTRL - bl reset_sctrl -#endif - #if defined(CONFIG_ARMV8_SPL_EXCEPTION_VECTORS) || !defined(CONFIG_SPL_BUILD) .macro set_vbar, regname, reg msr \regname, \reg @@ -195,39 +191,6 @@ slave_cpu: master_cpu: bl _main -#ifdef CONFIG_SYS_RESET_SCTRL -reset_sctrl: - switch_el x1, 3f, 2f, 1f -3: - mrs x0, sctlr_el3 - b 0f -2: - mrs x0, sctlr_el2 - b 0f -1: - mrs x0, sctlr_el1 - -0: - ldr x1, =0xfdfffffa - and x0, x0, x1 - - switch_el x1, 6f, 5f, 4f -6: - msr sctlr_el3, x0 - b 7f -5: - msr sctlr_el2, x0 - b 7f -4: - msr sctlr_el1, x0 - -7: - dsb sy - isb - b __asm_invalidate_tlb_all - ret -#endif - /*-----------------------------------------------------------------------*/ WEAK(apply_core_errata) -- 2.25.1

3 2

[PATCH v5 0/4] Fix compiler warnings for 32-bit ARM
by Simon Glass 04 Feb '22

04 Feb '22

These were noticed when building sandbox on a Raspberry Pi 400, which uses 32-bit linux. To make this work, I enabled CONFIG_HOST_32BIT in 'make menuconfig'. It would be nice if that were automatic, since we have the logic already in arch/sandbox/config.mk So this series adds that. It also fixes the unicode warnings of the form: /usr/bin/ld: warning: arch/sandbox/cpu/start.o uses 2-byte wchar_t yet the output is to use 4-byte wchar_t; use of wchar_t values across objects may fail as suggested by Heinrich. Changes in v5: - Resync with upstream instead Changes in v4: - Rebase to master - Use $(HOSTCC) instead of gcc - Add proper Kconfig help Changes in v3: - Change some things EFI things missed (or new since) last time - Use 'bitness' instead of 'bit' - Add a new patch to change non-EFI occurences Changes in v2: - Drop patches previously applied - Put all the packages in gcc.rst Simon Glass (4): scripts/checkpatch.pl: Resync with v5.16 efi: Use 16-bit unicode strings sandbox: Detect the host bit size automatically treewide: Use 16-bit unicode strings Makefile | 11 +- arch/sandbox/Kconfig | 33 +- cmd/efidebug.c | 28 +- doc/develop/checkpatch.rst | 590 ++++++++++++++++-- include/efi_loader.h | 2 +- include/efi_selftest.h | 4 +- lib/efi_loader/efi_bootmgr.c | 12 +- lib/efi_loader/efi_boottime.c | 2 +- lib/efi_loader/efi_capsule.c | 22 +- lib/efi_loader/efi_helper.c | 2 +- lib/efi_loader/efi_image_loader.c | 8 +- lib/efi_loader/efi_setup.c | 14 +- lib/efi_loader/efi_string.c | 2 +- lib/efi_loader/efi_tcg2.c | 4 +- lib/efi_loader/efi_var_common.c | 12 +- lib/efi_loader/efi_variable.c | 6 +- lib/efi_loader/efi_variable_tee.c | 2 +- lib/efi_loader/helloworld.c | 40 +- lib/efi_selftest/dtbdump.c | 82 +-- lib/efi_selftest/efi_selftest.c | 2 +- lib/efi_selftest/efi_selftest_block_device.c | 6 +- lib/efi_selftest/efi_selftest_devicepath.c | 2 +- lib/efi_selftest/efi_selftest_exception.c | 2 +- lib/efi_selftest/efi_selftest_fdt.c | 6 +- lib/efi_selftest/efi_selftest_hii.c | 8 +- lib/efi_selftest/efi_selftest_load_file.c | 4 +- lib/efi_selftest/efi_selftest_loadimage.c | 4 +- .../efi_selftest_miniapp_exception.c | 4 +- lib/efi_selftest/efi_selftest_miniapp_exit.c | 8 +- .../efi_selftest_miniapp_return.c | 2 +- lib/efi_selftest/efi_selftest_reset.c | 2 +- lib/efi_selftest/efi_selftest_textoutput.c | 12 +- .../efi_selftest_unicode_collation.c | 38 +- lib/efi_selftest/efi_selftest_util.c | 106 ++-- lib/efi_selftest/efi_selftest_variables.c | 22 +- .../efi_selftest_variables_runtime.c | 4 +- lib/efi_selftest/initrddump.c | 60 +- lib/lzma/Types.h | 4 +- lib/vsprintf.c | 2 +- scripts/checkpatch.pl | 145 +++-- scripts/kconfig/Makefile | 14 +- scripts/spdxcheck.py | 2 +- test/print_ut.c | 2 +- test/unicode_ut.c | 22 +- 44 files changed, 974 insertions(+), 385 deletions(-) -- 2.35.0.rc0.227.g00780c9af4-goog

3 10

[PATCH V3] usb: ehci-mx6: Enable OTG detection on imx8mm and imx8mn
by Adam Ford 03 Feb '22

03 Feb '22

The imx8mm and imx8mn appear compatible with imx7d-usb flags in the OTG driver. If the dr_mode is defined as host or peripheral, the device appears to operate correctly, however the auto host/peripheral detection results in an error. The solution isn't just adding checks for imx8mm and imx8mn to the check for imx7, because the USB clock needs to be running to read from the USBNC_PHY_STATUS_OFFSET register or it will hang. Marek requested that I not enable the clocks in ehci_usb_of_to_plat, so I modified that function to return an unknown state if the device tree does not explicitly state whether it is a host or a peripheral. When the driver probes, it looks to see if it's in the unknown state, and only then will it read the register to auto-detect. Signed-off-by: Adam Ford <aford173(a)gmail.com> --- V3: Keep ehci_usb_of_to_plat but add the ability to return and unknown state instead of reading the register. If the probe determines the states is unknown, it will query the register after the clocks have been enabled. Because of the slight behavior change, I removed any review or tested tags. V2: Rename ehci_usb_of_to_plat to ehci_usb_dr_mode and call it from the probe after the clocks are enabled, but before the data is needed. diff --git a/drivers/usb/host/ehci-mx6.c b/drivers/usb/host/ehci-mx6.c index 1bd6147c76..cf44e53ff7 100644 --- a/drivers/usb/host/ehci-mx6.c +++ b/drivers/usb/host/ehci-mx6.c @@ -543,7 +543,7 @@ static int ehci_usb_phy_mode(struct udevice *dev) plat->init_type = USB_INIT_DEVICE; else plat->init_type = USB_INIT_HOST; - } else if (is_mx7()) { + } else if (is_mx7() || is_imx8mm() || is_imx8mn()) { phy_status = (void __iomem *)(addr + USBNC_PHY_STATUS_OFFSET); val = readl(phy_status); @@ -573,9 +573,8 @@ static int ehci_usb_of_to_plat(struct udevice *dev) case USB_DR_MODE_PERIPHERAL: plat->init_type = USB_INIT_DEVICE; break; - case USB_DR_MODE_OTG: - case USB_DR_MODE_UNKNOWN: - return ehci_usb_phy_mode(dev); + default: + plat->init_type = USB_INIT_UNKNOWN; }; return 0; @@ -677,6 +676,20 @@ static int ehci_usb_probe(struct udevice *dev) mdelay(1); #endif + /* + * If the device tree didn't specify host or device, + * the default is USB_INIT_UNKNOWN, so we need to check + * the register. For imx8mm and imx8mn, the clocks need to be + * running first, so we defer the check until they are. + */ + if (priv->init_type == USB_INIT_UNKNOWN) { + ret = ehci_usb_phy_mode(dev); + if (ret) + goto err_clk; + else + priv->init_type = plat->init_type; + } + #if CONFIG_IS_ENABLED(DM_REGULATOR) ret = device_get_supply_regulator(dev, "vbus-supply", &priv->vbus_supply); diff --git a/include/usb.h b/include/usb.h index b3851fdb4f..47d738a786 100644 --- a/include/usb.h +++ b/include/usb.h @@ -163,7 +163,8 @@ struct int_queue; */ enum usb_init_type { USB_INIT_HOST, - USB_INIT_DEVICE + USB_INIT_DEVICE, + USB_INIT_UNKNOWN, }; /********************************************************************** -- 2.32.0

5 8

[RFC 0/2] A/B firmware update based in eMMC boot partition.
by Ying-Chun Liu 03 Feb '22

03 Feb '22

From: "Ying-Chun Liu (PaulLiu)" <paul.liu(a)linaro.org> Hi all, I've implemented A/B firmware update based on eMMC hw partitions. Normally we have 2 boot partitions on eMMC. One is active and another is inactive. We can then flash the firmware to the inactive one and make it active. Also when booting we can write protect the current active one. And left the inactive partition still writable. So I make 2 commits that implements the following features: 1. Write protect "active" boot area when board init. 2. flash firmware to inactive boot area. 3. Change the inactive boot area after firmware update. Thanks. Ying-Chun Liu (PaulLiu) (2): drivers: mmc: write protect active boot area after mmc init. drivers: dfu: flash firmware to inactive boot area and active it drivers/dfu/dfu_mmc.c | 32 +++++++++++++++++++++--- drivers/mmc/Kconfig | 10 ++++++++ drivers/mmc/mmc.c | 58 +++++++++++++++++++++++++++++++++++++++++++ include/dfu.h | 1 + 4 files changed, 98 insertions(+), 3 deletions(-) -- 2.34.1

6 8

[PATCH] adc: rockchip-saradc: add support for getting reference voltage value
by Peter Cai 03 Feb '22

03 Feb '22

Mirroring commit 97ab802aa36f ("adc: meson-saradc: add support for getting reference voltage value") for meson-saradc, this adds support for getting the "vref-supply" regulator and register it as the ADC's reference voltage regulator, so clients can translate sampled ADC values to voltage. Signed-off-by: Peter Cai <peter(a)typeblog.net> Cc: Simon Glass <sjg(a)chromium.org> Cc: Philipp Tomsich <philipp.tomsich(a)vrull.eu> Cc: Kever Yang <kever.yang(a)rock-chips.com> --- drivers/adc/rockchip-saradc.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/drivers/adc/rockchip-saradc.c b/drivers/adc/rockchip-saradc.c index e464d33f2267..67c11d896e8d 100644 --- a/drivers/adc/rockchip-saradc.c +++ b/drivers/adc/rockchip-saradc.c @@ -13,6 +13,7 @@ #include <asm/io.h> #include <linux/bitops.h> #include <linux/err.h> +#include <power/regulator.h> #define SARADC_CTRL_CHN_MASK GENMASK(2, 0) #define SARADC_CTRL_POWER_CTRL BIT(3) @@ -100,8 +101,11 @@ int rockchip_saradc_stop(struct udevice *dev) int rockchip_saradc_probe(struct udevice *dev) { + struct adc_uclass_plat *uc_pdata = dev_get_uclass_plat(dev); struct rockchip_saradc_priv *priv = dev_get_priv(dev); struct clk clk; + struct udevice *vref; + int vref_uv; int ret; ret = clk_get_by_index(dev, 0, &clk); @@ -114,6 +118,23 @@ int rockchip_saradc_probe(struct udevice *dev) priv->active_channel = -1; + ret = device_get_supply_regulator(dev, "vref-supply", &vref); + if (ret) { + printf("can't get vref-supply: %d\n", ret); + return ret; + } + + vref_uv = regulator_get_value(vref); + if (vref_uv < 0) { + printf("can't get vref-supply value: %d\n", vref_uv); + return vref_uv; + } + + /* VDD supplied by common vref pin */ + uc_pdata->vdd_supply = vref; + uc_pdata->vdd_microvolts = vref_uv; + uc_pdata->vss_microvolts = 0; + return 0; } -- 2.35.0

2 1

[PATCH] sandbox: fix build failure with musl and SDL
by Heinrich Schuchardt 03 Feb '22

03 Feb '22

sdl.c is compiled against the SDL library. Trying to redefine wchar_t with -fshort-wchar is not necessary and leads to build failures when compiling against musl. Cc: Milan P. Stanić <mps(a)arvanta.net> Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt(a)canonical.com> --- arch/sandbox/Makefile | 7 +++++++ arch/sandbox/cpu/Makefile | 11 ++++++++--- 2 files changed, 15 insertions(+), 3 deletions(-) diff --git a/arch/sandbox/Makefile b/arch/sandbox/Makefile index f6cf859f24..0bdd322f12 100644 --- a/arch/sandbox/Makefile +++ b/arch/sandbox/Makefile @@ -4,3 +4,10 @@ head-y := arch/sandbox/cpu/start.o arch/sandbox/cpu/os.o head-$(CONFIG_SANDBOX_SDL) += arch/sandbox/cpu/sdl.o libs-y += arch/sandbox/cpu/ libs-y += arch/sandbox/lib/ + +# sdl.c fails to compile with -fshort-wchar using musl. +cmd_cc_sdl.o = $(CC) $(filter-out -nostdinc -fshort-wchar, \ + $(patsubst -I%,-idirafter%,$(c_flags))) -c -o $@ $< + +$(obj)/sdl.o: $(src)/sdl.c FORCE + $(call if_changed_dep,cc_sdl.o) diff --git a/arch/sandbox/cpu/Makefile b/arch/sandbox/cpu/Makefile index de7fe7f391..b74c866e56 100644 --- a/arch/sandbox/cpu/Makefile +++ b/arch/sandbox/cpu/Makefile @@ -7,7 +7,7 @@ obj-y := cache.o cpu.o state.o extra-y := start.o os.o -extra-$(CONFIG_SANDBOX_SDL) += sdl.o +extra-$(CONFIG_SANDBOX_SDL) += sdl.o obj-$(CONFIG_SPL_BUILD) += spl.o obj-$(CONFIG_ETH_SANDBOX_RAW) += eth-raw-os.o @@ -19,8 +19,6 @@ cmd_cc_os.o = $(CC) $(filter-out -nostdinc, \ $(obj)/os.o: $(src)/os.c FORCE $(call if_changed_dep,cc_os.o) -$(obj)/sdl.o: $(src)/sdl.c FORCE - $(call if_changed_dep,cc_os.o) # eth-raw-os.c is built in the system env, so needs standard includes # CFLAGS_REMOVE_eth-raw-os.o cannot be used to drop header include path @@ -30,3 +28,10 @@ cmd_cc_eth-raw-os.o = $(CC) $(filter-out -nostdinc, \ $(obj)/eth-raw-os.o: $(src)/eth-raw-os.c FORCE $(call if_changed_dep,cc_eth-raw-os.o) + +# sdl.c fails to build with -fshort-wchar using musl +cmd_cc_sdl.o = $(CC) $(filter-out -nostdinc -fshort-wchar, \ + $(patsubst -I%,-idirafter%,$(c_flags))) -c -o $@ $< + +$(obj)/sdl.o: $(src)/sdl.c FORCE + $(call if_changed_dep,cc_sdl.o) -- 2.33.1

4 5

[PATCH v2 0/2] EFI: Reset system after capsule-on-disk
by Masami Hiramatsu 03 Feb '22

03 Feb '22

Hi, Here is the 3rd version of the reset after capsule-on-disk. This version updates the patch description and use do_reset() and halt or reset_cpu() if available, according to Takahiro and Sughosh's comment. The reset after completing the capsule-on-disk is stated in the UEFI specification 2.9, section 8.5.5 "Delivery of Capsules via file on Mass Storage device" as below, In all cases that a capsule is identified for processing the system is restarted after capsule processing is completed. Thank you, --- Masami Hiramatsu (2): efi_loader: use efi_update_capsule_firmware() for capsule on disk efi_loader: Reset system after CapsuleUpdate on disk lib/efi_loader/efi_capsule.c | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) -- Masami Hiramatsu <masami.hiramatsu(a)linaro.org>

2 5

pull request of u-boot-fsl-qoriq for v2022.04
by Priyanka Jain 03 Feb '22

03 Feb '22

Dear Tom, Please find my pull-request for u-boot-fsl-qoriq/master https://github.com/u-boot/u-boot/pull/107 Summary Update and fixes for ls1088a, FMAN, ls1046ardb, ls1043ardb sync ls1028ardb u-boot and Linux device-tree Regards Priyanka ------------ The following changes since commit df887a045a1d726bbd654ef266e5cbe8cc0c2db3: Prepare v2022.04-rc1 (2022-01-31 17:57:32 -0500) are available in the Git repository at: https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq.git HEAD for you to fetch changes up to 522f70463c854e69933e46a8670b4571d0be1349: board: ls1046ardb: force PCI device enumeration (2022-02-01 15:08:07 +0530) ---------------------------------------------------------------- Aleksandar Gerasimovski (18): arm: ls1021a: limit debug eth phy speed to 100Mbps km: qrio: add function to read SLFTEST pin status km/ls102xa: use qrio selftest_pin for reading selftest km: qrio: add function to read PGY_PRES pin status km/ls102xa: dbg phy prst depends on piggy presence km: qrio: add access functions for ebootcount km: common: implement field fail-safe u-boot update km/ls102xa: add support for field fail-safe u-boot update configs/seli8: enable field fail-safe u-boot update configs/seli8: add u-boot update defconfig km/ls102xa: fix device disable configuration configs: seli8: enable ver envvar for version_string configs: expu1: enable ver envvar for version_string configs/expu1: enable field fail-safe u-boot update configs/expu1: add u-boot update defconfig arm/expu1/seli8: adapt dts NOR partition table to the latest used configs/expu1/seli8: limit autoboot stop to space key km/ls102xa: use unused scratchrw4 address for post word Camelia Groza (1): configs: fsl: add missing FMAN/QE_FW_ADDR defines Hou Zhiqiang (1): pci: layerscape: update the searching compatible of LX2160A PCIe Jianpeng Bu (1): board: ls1088a: update ifc node name to be memory-controller Martin Schiller (2): board: ls1043ardb: force PCI device enumeration board: ls1046ardb: force PCI device enumeration Mathew McBride (2): board: traverse: add Ten64 board controller driver board: traverse: add initial Ten64 support Vladimir Oltean (16): i2c: muxes: pca954x: add PCA9847 variant rtc: pcf2127: sync with Linux compatible strings arm: dts: ls1088a-qds: use Linux compatible string for RTC arm: dts: ls1088a-rdb: use Linux compatible string for RTC arm: dts: lx2160a-qds: use Linux compatible string for RTC arm: dts: ls1028a-qds: use Linux compatible string for RTC arm: dts: ls1028a-rdb: use Linux compatible string for RTC arm: dts: lx2160a-rdb: use Linux compatible string for RTC rtc: pcf2127: remove U-Boot specific compatible string arm: dts: ls1028a-rdb: sort nodes alphabetically arm: dts: ls1028a-rdb: sync Ethernet device tree nodes with Linux arm: dts: ls1028a-rdb: disable DSPI nodes arm: dts: ls1028a-rdb: disable I2C buses 1 through 7 arm: dts: ls1028a-rdb: enable PCIe controllers from U-Boot dtsi arm: dts: ls1028a-rdb: sync device tree with Linux arm: dts: ls1028a-qds: declare in-band autoneg for Ethernet ports arch/arm/Kconfig | 16 + arch/arm/dts/Makefile | 2 + arch/arm/dts/fsl-ls1028a-qds-1xxx-sch-30842.dtsi | 1 + arch/arm/dts/fsl-ls1028a-qds-8xxx-sch-24801.dtsi | 1 + .../dts/fsl-ls1028a-qds-9999-sch-24801-LBRW.dtsi | 4 + arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801.dtsi | 4 + .../dts/fsl-ls1028a-qds-x3xx-sch-30841-LBRW.dtsi | 4 + .../dts/fsl-ls1028a-qds-x5xx-sch-28021-LBRW.dtsi | 4 + arch/arm/dts/fsl-ls1028a-qds.dtsi | 2 +- arch/arm/dts/fsl-ls1028a-rdb-u-boot.dtsi | 15 + arch/arm/dts/fsl-ls1028a-rdb.dts | 294 +++++++++----- arch/arm/dts/fsl-ls1088a-qds.dtsi | 2 +- arch/arm/dts/fsl-ls1088a-rdb.dts | 2 +- arch/arm/dts/fsl-ls1088a-ten64.dts | 377 ++++++++++++++++++ arch/arm/dts/fsl-lx2160a-qds.dtsi | 2 +- arch/arm/dts/fsl-lx2160a-rdb.dts | 2 +- arch/arm/dts/ls1021a-pg-wcom-expu1.dts | 15 +- arch/arm/dts/ls1021a-pg-wcom-seli8.dts | 15 +- board/freescale/ls1043ardb/ls1043ardb.c | 4 + board/freescale/ls1046ardb/ls1046ardb.c | 4 + board/freescale/ls1088a/ls1088a.c | 10 +- board/keymile/Kconfig | 32 ++ board/keymile/README | 18 + board/keymile/common/common.c | 53 +++ board/keymile/common/common.h | 4 + board/keymile/common/qrio.c | 64 +++ board/keymile/common/qrio.h | 2 + board/keymile/pg-wcom-ls102xa/MAINTAINERS | 2 + board/keymile/pg-wcom-ls102xa/pg-wcom-ls102xa.c | 30 +- board/traverse/common/Kconfig | 6 + board/traverse/common/Makefile | 1 + board/traverse/common/ten64-controller.h | 28 ++ board/traverse/common/ten64_controller.c | 240 +++++++++++ board/traverse/ten64/Kconfig | 17 + board/traverse/ten64/MAINTAINERS | 8 + board/traverse/ten64/Makefile | 6 + board/traverse/ten64/eth_ten64.c | 47 +++ board/traverse/ten64/ten64.c | 438 +++++++++++++++++++++ configs/T1024RDB_NAND_defconfig | 1 + configs/T1042D4RDB_SDCARD_defconfig | 1 + configs/T2080RDB_defconfig | 1 + configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig | 1 + configs/pg_wcom_expu1_defconfig | 9 +- configs/pg_wcom_expu1_update_defconfig | 83 ++++ configs/pg_wcom_seli8_defconfig | 9 +- configs/pg_wcom_seli8_update_defconfig | 83 ++++ configs/ten64_tfa_defconfig | 119 ++++++ drivers/i2c/muxes/pca954x.c | 9 +- drivers/pci/Kconfig | 4 +- drivers/pci/pcie_layerscape_fixup.c | 9 +- drivers/rtc/pcf2127.c | 4 +- include/configs/km/pg-wcom-ls102xa.h | 2 + include/configs/ten64.h | 55 +++ 53 files changed, 2028 insertions(+), 138 deletions(-) create mode 100644 arch/arm/dts/fsl-ls1028a-rdb-u-boot.dtsi create mode 100644 arch/arm/dts/fsl-ls1088a-ten64.dts create mode 100644 board/keymile/README create mode 100644 board/traverse/common/Kconfig create mode 100644 board/traverse/common/Makefile create mode 100644 board/traverse/common/ten64-controller.h create mode 100644 board/traverse/common/ten64_controller.c create mode 100644 board/traverse/ten64/Kconfig create mode 100644 board/traverse/ten64/MAINTAINERS create mode 100644 board/traverse/ten64/Makefile create mode 100644 board/traverse/ten64/eth_ten64.c create mode 100644 board/traverse/ten64/ten64.c create mode 100644 configs/pg_wcom_expu1_update_defconfig create mode 100644 configs/pg_wcom_seli8_update_defconfig create mode 100644 configs/ten64_tfa_defconfig create mode 100644 include/configs/ten64.h

2 1