February 2022 - U-Boot

Re: [PATCH] gpio: Enable hogging support in SPL
by Simon Glass 04 Feb '22

04 Feb '22

Hi Eddie, On Thu, 3 Feb 2022 at 15:37, Eddie James <eajames(a)linux.ibm.com> wrote: > > Use the CONFIG macros to conditionally build the GPIO hogging support in > either the SPL or U-Boot, or both, depending on the configuration. Also > call the GPIO hog probe function in the common SPL board initialization > as an equivalent to adding it to the U-Boot init sequence functions. > > Signed-off-by: Eddie James <eajames(a)linux.ibm.com> > --- > common/spl/spl.c | 7 +++++++ > drivers/gpio/Kconfig | 10 ++++++++++ > drivers/gpio/gpio-uclass.c | 10 ++++++---- > 3 files changed, 23 insertions(+), 4 deletions(-) > > diff --git a/common/spl/spl.c b/common/spl/spl.c > index 884102bdea..f667908eec 100644 > --- a/common/spl/spl.c > +++ b/common/spl/spl.c > @@ -20,6 +20,9 @@ > #include <serial.h> > #include <spl.h> > #include <asm/global_data.h> > +#if defined(CONFIG_SPL_GPIO_HOG) Can you drop this ifdef? > +#include <asm/gpio.h> > +#endif > #include <asm/u-boot.h> > #include <nand.h> > #include <fat.h> > @@ -739,6 +742,10 @@ void board_init_r(gd_t *dummy1, ulong dummy2) > } > } > > +#if defined(CONFIG_SPL_GPIO_HOG) > + gpio_hog_probe_all(); > +#endif if (CONFIG_IS_ENABLED(GPIO_HOG)) ... > + > #if CONFIG_IS_ENABLED(BOARD_INIT) > spl_board_init(); > #endif > diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig > index 305a2dc563..4da2bdc10d 100644 > --- a/drivers/gpio/Kconfig > +++ b/drivers/gpio/Kconfig > @@ -57,6 +57,16 @@ config GPIO_HOG > is a mechanism providing automatic GPIO request and config- > uration as part of the gpio-controller's driver probe function. > > +config SPL_GPIO_HOG > + bool "Enable GPIO hog support in SPL" > + depends on SPL_GPIO_SUPPORT Should it depend on GPIO_HOG? I'm not sure, just a question > + default n > + help > + Enable gpio hog support in SPL > + The GPIO chip may contain GPIO hog definitions. GPIO hogging > + is a mechanism providing automatic GPIO request and config- > + uration as part of the gpio-controller's driver probe function. > + > config DM_GPIO_LOOKUP_LABEL > bool "Enable searching for gpio labelnames" > depends on DM_GPIO > diff --git a/drivers/gpio/gpio-uclass.c b/drivers/gpio/gpio-uclass.c > index 125ae53d61..bebba620c9 100644 > --- a/drivers/gpio/gpio-uclass.c > +++ b/drivers/gpio/gpio-uclass.c > @@ -1432,9 +1432,6 @@ void devm_gpiod_put(struct udevice *dev, struct gpio_desc *desc) > > static int gpio_post_bind(struct udevice *dev) > { > - struct udevice *child; > - ofnode node; > - > #if defined(CONFIG_NEEDS_MANUAL_RELOC) > struct dm_gpio_ops *ops = (struct dm_gpio_ops *)device_get_ops(dev); > static int reloc_done; > @@ -1465,7 +1462,11 @@ static int gpio_post_bind(struct udevice *dev) > } > #endif > > - if (CONFIG_IS_ENABLED(OF_REAL) && IS_ENABLED(CONFIG_GPIO_HOG)) { > +#if CONFIG_IS_ENABLED(GPIO_HOG) > + { > + struct udevice *child; > + ofnode node; > + > dev_for_each_subnode(node, dev) { > if (ofnode_read_bool(node, "gpio-hog")) { > const char *name = ofnode_get_name(node); > @@ -1480,6 +1481,7 @@ static int gpio_post_bind(struct udevice *dev) > } > } > } > +#endif > return 0; > } > > -- > 2.27.0 >

2 1

Pull request: u-boot-sunxi/master for 2022.04 (part 2)
by Andre Przywara 04 Feb '22

04 Feb '22

Hi Tom, this is the promised second part of the sunxi PR for 2022.04, albeit technially outside of the merge window. We were working on this full steam since the beginning of the year, and it deserves to be merged, I think. The main attraction is support for the F1C100s SoC, which sports a venerable ARM926 core. Support for this SoC and the LicheePi Nano board has been in Linux for years, and U-Boot patches were posted mid last year already. The new SoC using ARMv5 also means that the bulk of the new code should not touch any existing boards, although we did some refactorings first, of course, which actually cleans up some existing sunxi code. Compile tested for all 160 sunxi boards, and briefly tested on BananaPi M1, OrangePi Zero, Pine64 and Pine-H64. Tested by others on their boards, including F1C100s and F1C200s devices. Thanks, Andre ====================================== The following changes since commit 006fddde01da7e8b3c7cad4a35f3245edc894ab4: Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq (2022-02-02 09:16:49 -0500) are available in the Git repository at: https://source.denx.de/u-boot/custodians/u-boot-sunxi.git master for you to fetch changes up to b6ffd58e45043b822844345d4ca9b2cb1e2917b7: configs: sunxi: Add support for Lichee Pi Nano (2022-02-04 00:09:57 +0000) ---------------------------------------------------------------- Andre Przywara (5): sunxi: move non-essential code out of s_init() sunxi: move Cortex SMPEN setting into start.S sunxi: move early "SRAM setup" into separate file armv8: remove no longer needed lowlevel_init.S sunxi-common.h: remove pointless #ifdefs Icenowy Zheng (9): arm: arm926ej-s: start.S: port save_boot_params support from armv7 code arm: arm926ej-s: Add sunxi code ARM: sunxi: Add clock and uart to sunxi headers sunxi: Add F1C100s DRAM initial support sunxi: board: Add support for SUNIV configs: sunxi: Add common SUNIV header mach-sunxi: Add support for SUNIV architecture ARM: dts: suniv: Add device tree files and bindings for F1C100s configs: sunxi: Add support for Lichee Pi Nano Jesse Taube (1): mach-sunxi: Move timer code to mach folder Kconfig | 8 +- arch/arm/Kconfig | 3 - arch/arm/cpu/arm926ejs/Makefile | 1 + arch/arm/cpu/arm926ejs/cpu.c | 13 + arch/arm/cpu/arm926ejs/start.S | 19 + arch/arm/cpu/arm926ejs/sunxi/Makefile | 5 + arch/arm/cpu/arm926ejs/sunxi/config.mk | 6 + arch/arm/cpu/arm926ejs/sunxi/fel_utils.S | 33 ++ arch/arm/cpu/arm926ejs/sunxi/u-boot-spl.lds | 48 +++ arch/arm/cpu/armv7/Kconfig | 5 + arch/arm/cpu/armv7/start.S | 11 + arch/arm/cpu/armv7/sunxi/Makefile | 4 +- arch/arm/cpu/armv7/sunxi/sram.c | 40 +++ arch/arm/cpu/armv8/Makefile | 1 - arch/arm/cpu/armv8/lowlevel_init.S | 43 --- arch/arm/dts/Makefile | 2 + arch/arm/dts/suniv-f1c100s-licheepi-nano.dts | 26 ++ arch/arm/dts/suniv-f1c100s.dtsi | 144 ++++++++ arch/arm/dts/sunxi-u-boot.dtsi | 2 + arch/arm/include/asm/arch-sunxi/clock.h | 2 +- arch/arm/include/asm/arch-sunxi/clock_sun6i.h | 13 + arch/arm/include/asm/arch-sunxi/cpu_sun4i.h | 7 + arch/arm/include/asm/arch-sunxi/dram.h | 2 + arch/arm/include/asm/arch-sunxi/dram_suniv.h | 46 +++ arch/arm/include/asm/arch-sunxi/gpio.h | 1 + arch/arm/mach-sunxi/Kconfig | 18 +- arch/arm/mach-sunxi/Makefile | 5 + arch/arm/mach-sunxi/board.c | 109 +++--- arch/arm/mach-sunxi/clock.c | 3 +- arch/arm/mach-sunxi/clock_sun6i.c | 86 +++-- arch/arm/mach-sunxi/cpu_info.c | 2 + arch/arm/mach-sunxi/dram_helpers.c | 4 + arch/arm/mach-sunxi/dram_suniv.c | 420 +++++++++++++++++++++++ arch/arm/{cpu/armv7/sunxi => mach-sunxi}/timer.c | 7 +- board/sunxi/board.c | 4 +- boot/Kconfig | 7 +- configs/licheepi_nano_defconfig | 11 + include/configs/suniv.h | 14 + include/configs/sunxi-common.h | 64 ++-- include/dt-bindings/clock/suniv-ccu-f1c100s.h | 70 ++++ include/dt-bindings/reset/suniv-ccu-f1c100s.h | 38 ++ 41 files changed, 1174 insertions(+), 173 deletions(-) create mode 100644 arch/arm/cpu/arm926ejs/sunxi/Makefile create mode 100644 arch/arm/cpu/arm926ejs/sunxi/config.mk create mode 100644 arch/arm/cpu/arm926ejs/sunxi/fel_utils.S create mode 100644 arch/arm/cpu/arm926ejs/sunxi/u-boot-spl.lds create mode 100644 arch/arm/cpu/armv7/sunxi/sram.c delete mode 100644 arch/arm/cpu/armv8/lowlevel_init.S create mode 100644 arch/arm/dts/suniv-f1c100s-licheepi-nano.dts create mode 100644 arch/arm/dts/suniv-f1c100s.dtsi create mode 100644 arch/arm/include/asm/arch-sunxi/dram_suniv.h create mode 100644 arch/arm/mach-sunxi/dram_suniv.c rename arch/arm/{cpu/armv7/sunxi => mach-sunxi}/timer.c (97%) create mode 100644 configs/licheepi_nano_defconfig create mode 100644 include/configs/suniv.h create mode 100644 include/dt-bindings/clock/suniv-ccu-f1c100s.h create mode 100644 include/dt-bindings/reset/suniv-ccu-f1c100s.h

2 2

[PATCH v4 00/18] image: add a stage pre-load
by Philippe Reynes 04 Feb '22

04 Feb '22

This serie adds a stage pre-load before launching an image. This stage is used to read a header before the image and this header contains the signature of the full image. So u-boot may check the full image before using any data of the image. The support of this header is added to binman, and a command verify checks the signature of a blob and set the u-boot env variable "loadaddr_verified" to the beginning of the "real" image. The support of this header is only added to binman, but it may also be added to mkimage. Changelog: v4: - add a config SANDBOX_BIN - enhance help for asn1 and oid - change the format of the pre-load header - add the support of pre-load header in binman - add py test for pre-load header - add a command verify v3: - move image-pre-load.c to /boot - update mkimage to add public key in u-boot device tree - add script gen_pre_load_header.sh v2: - move the code to image-pre-load - add support of stage pre-load for spl - add support of stage pre-load on spl_ram Philippe Reynes (18): arch: sandbox: add an config SANDBOX_BINMAN arch: sandbox: dts: sandbox.dts: add empty binman node configs: sandbox_defconfig: enable SANDBOX_BINMAN lib: Kconfig: enhance help for ASN1 lib: Kconfig: enhance the help of OID_REGISTRY lib: allow to build asn1 decoder and oid registry in SPL lib: crypto: allow to build crypyo in SPL lib: rsa: allow rsa verify with pkey in SPL boot: image: add a stage pre-load cmd: bootm: add a stage pre-load common: spl: fit_ram: allow to use image pre load mkimage: add public key for image pre-load stage Makefile: provide sah-key to binman tools: binman: add support for pre-load header configs: sandbox_defconfig: enable stage pre-load in bootm test: py: vboot: add test for global image signature cmd: verify: initial import configs: sandbox_defconfig: enable config CMD_VERIFY Makefile | 1 + arch/sandbox/Kconfig | 7 + arch/sandbox/dts/sandbox.dts | 3 + boot/Kconfig | 55 +++ boot/Makefile | 1 + boot/bootm.c | 33 ++ boot/image-pre-load.c | 408 ++++++++++++++++++ cmd/Kconfig | 17 + cmd/Makefile | 1 + cmd/bootm.c | 2 +- cmd/verify.c | 53 +++ common/spl/spl_ram.c | 21 +- configs/sandbox_defconfig | 6 + include/image.h | 30 ++ lib/Kconfig | 37 +- lib/Makefile | 10 +- lib/crypto/Kconfig | 29 ++ lib/crypto/Makefile | 19 +- lib/rsa/Kconfig | 19 + test/py/tests/test_vboot.py | 119 ++++- test/py/tests/vboot/sandbox-binman-pss.dts | 25 ++ test/py/tests/vboot/sandbox-binman.dts | 24 ++ .../tests/vboot/sandbox-u-boot-global-pss.dts | 25 ++ test/py/tests/vboot/sandbox-u-boot-global.dts | 24 ++ test/py/tests/vboot/simple-images.its | 36 ++ tools/binman/etype/pre_load.py | 156 +++++++ tools/fit_image.c | 3 + tools/image-host.c | 114 +++++ 28 files changed, 1253 insertions(+), 25 deletions(-) create mode 100644 boot/image-pre-load.c create mode 100644 cmd/verify.c create mode 100644 test/py/tests/vboot/sandbox-binman-pss.dts create mode 100644 test/py/tests/vboot/sandbox-binman.dts create mode 100644 test/py/tests/vboot/sandbox-u-boot-global-pss.dts create mode 100644 test/py/tests/vboot/sandbox-u-boot-global.dts create mode 100644 test/py/tests/vboot/simple-images.its create mode 100644 tools/binman/etype/pre_load.py -- 2.17.1

2 20

[PATCH] mkimage: Improve documentation of algo-name parameter
by Jan Kiszka 04 Feb '22

04 Feb '22

From: Jan Kiszka <jan.kiszka(a)siemens.com> Addresses the feedback provided on 5902a397d029 which raced with the merge. Signed-off-by: Jan Kiszka <jan.kiszka(a)siemens.com> --- doc/mkimage.1 | 2 +- tools/imagetool.h | 3 ++- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/doc/mkimage.1 b/doc/mkimage.1 index 0734bd36a11..fc84cca066b 100644 --- a/doc/mkimage.1 +++ b/doc/mkimage.1 @@ -158,7 +158,7 @@ CONFIG_OF_CONTROL in U-Boot. .TP .BI "\-o [" "signing algorithm" "]" Specifies the algorithm to be used for signing a FIT image. The default is -taken from the target signature nodes 'algo' properties. +taken from the signature node's 'algo' property. .TP .BI "\-p [" "external position" "]" diff --git a/tools/imagetool.h b/tools/imagetool.h index a4105515d81..12f911600f9 100644 --- a/tools/imagetool.h +++ b/tools/imagetool.h @@ -71,7 +71,8 @@ struct image_tool_params { const char *keydest; /* Destination .dtb for public key */ const char *keyfile; /* Filename of private or public key */ const char *comment; /* Comment to add to signature node */ - const char *algo_name; /* Algorithm name to use hashing/signing */ + const char *algo_name; /* Algorithm name to use for hashing/signing or + NULL to use the one specified in the its */ int require_keys; /* 1 to mark signing keys as 'required' */ int file_size; /* Total size of output file */ int orig_file_size; /* Original size for file before padding */ -- 2.34.1

2 1

[PATCH v2] zynqmp: Use the same style for macro definitions
by Michal Simek 04 Feb '22

04 Feb '22

Use the same coding style for all macros. #define<space>NAME<tab/tabs>VALUE Signed-off-by: Michal Simek <michal.simek(a)xilinx.com> --- Changes in v2: - Change base include/zynqmp_firmware.h | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/include/zynqmp_firmware.h b/include/zynqmp_firmware.h index 2db05a94a870..5927dd94d7bd 100644 --- a/include/zynqmp_firmware.h +++ b/include/zynqmp_firmware.h @@ -342,20 +342,20 @@ enum pm_ioctl_id { IOCTL_AIE_ISR_CLEAR = 24, }; -#define PM_SIP_SVC 0xc2000000 +#define PM_SIP_SVC 0xc2000000 -#define ZYNQMP_PM_VERSION_MAJOR 1 -#define ZYNQMP_PM_VERSION_MINOR 0 -#define ZYNQMP_PM_VERSION_MAJOR_SHIFT 16 -#define ZYNQMP_PM_VERSION_MINOR_MASK 0xFFFF +#define ZYNQMP_PM_VERSION_MAJOR 1 +#define ZYNQMP_PM_VERSION_MINOR 0 +#define ZYNQMP_PM_VERSION_MAJOR_SHIFT 16 +#define ZYNQMP_PM_VERSION_MINOR_MASK 0xFFFF #define ZYNQMP_PM_VERSION \ ((ZYNQMP_PM_VERSION_MAJOR << ZYNQMP_PM_VERSION_MAJOR_SHIFT) | \ ZYNQMP_PM_VERSION_MINOR) -#define ZYNQMP_PM_VERSION_INVALID ~0 +#define ZYNQMP_PM_VERSION_INVALID ~0 -#define PMUFW_V1_0 ((1 << ZYNQMP_PM_VERSION_MAJOR_SHIFT) | 0) +#define PMUFW_V1_0 ((1 << ZYNQMP_PM_VERSION_MAJOR_SHIFT) | 0) /* * Return payload size -- 2.34.1

2 1

[PATCH] Dockfile, CI: Update to latest focal tag and build
by Tom Rini 04 Feb '22

04 Feb '22

- Latest focal tag - Add libgnutls to image Signed-off-by: Tom Rini <trini(a)konsulko.com> --- .azure-pipelines.yml | 2 +- .gitlab-ci.yml | 2 +- tools/docker/Dockerfile | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/.azure-pipelines.yml b/.azure-pipelines.yml index f2aa332be5cc..81ab77e1345c 100644 --- a/.azure-pipelines.yml +++ b/.azure-pipelines.yml @@ -2,7 +2,7 @@ variables: windows_vm: windows-2019 ubuntu_vm: ubuntu-18.04 macos_vm: macOS-10.15 - ci_runner_image: trini/u-boot-gitlab-ci-runner:focal-20220105-10Jan2022 + ci_runner_image: trini/u-boot-gitlab-ci-runner:focal-20220113-03Feb2022 # Add '-u 0' options for Azure pipelines, otherwise we get "permission # denied" error when it tries to "useradd -m -u 1001 vsts_azpcontainer", # since our $(ci_runner_image) user is not root. diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml index 75ad67fab032..85b52966346a 100644 --- a/.gitlab-ci.yml +++ b/.gitlab-ci.yml @@ -2,7 +2,7 @@ # Grab our configured image. The source for this is found at: # https://source.denx.de/u-boot/gitlab-ci-runner -image: trini/u-boot-gitlab-ci-runner:focal-20220105-10Jan2022 +image: trini/u-boot-gitlab-ci-runner:focal-20220113-03Feb2022 # We run some tests in different order, to catch some failures quicker. stages: diff --git a/tools/docker/Dockerfile b/tools/docker/Dockerfile index 141260cce13d..7a3f5cbade4e 100644 --- a/tools/docker/Dockerfile +++ b/tools/docker/Dockerfile @@ -2,7 +2,7 @@ # This Dockerfile is used to build an image containing basic stuff to be used # to build U-Boot and run our test suites. -FROM ubuntu:focal-20220105 +FROM ubuntu:focal-20220113 MAINTAINER Tom Rini <trini(a)konsulko.com> LABEL Description=" This image is for building U-Boot inside a container" -- 2.25.1

1 1

[PATCH] Dockerfile: Add libgnutls package for building mkeficapsule command
by AKASHI Takahiro 04 Feb '22

04 Feb '22

For adding signing feature for capsule authentication to the host tool, mkeficapsule, we will link gnutls library for crypto operation. Since we need this command to complete the capsule authentication test on sandbox in CI loop, necessary packages must be installed on the host. See my patch, "tools: mkeficapsule: add firmware image signing." Signed-off-by: AKASHI Takahiro <takahiro.akashi(a)linaro.org> --- Dockerfile | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Dockerfile b/Dockerfile index d2f0074ee8a6..83fc0c94a30a 100644 --- a/Dockerfile +++ b/Dockerfile @@ -62,6 +62,8 @@ RUN apt-get update && apt-get install -y \ imagemagick \ iputils-ping \ libguestfs-tools \ + libgnutls28-dev \ + libgnutls30 \ libisl15 \ liblz4-tool \ libpixman-1-dev \ -- 2.33.0

2 1

[PATCH] spl: ymodem: Fix buffer overflow during Image copy
by Vignesh Raghavendra 04 Feb '22

04 Feb '22

ymodem_read_fit() driver will end copying up to BUF_SIZE boundary even when requested size of copy operation is less than that. For example, if offset = 0, size = 1440B, ymodem_read_fit() ends up copying 2KB from offset = 0, to destination buffer addr This causes data corruption when malloc'd buffer is passed during UART boot since commit 03f1f78a9b44 ("spl: fit: Prefer a malloc()'d buffer for loading images") With this, UART boot works again on K3 (AM654, J7, AM64) family of devices. Fixes: 03f1f78a9b44 ("spl: fit: Prefer a malloc()'d buffer for loading images") Signed-off-by: Vignesh Raghavendra <vigneshr(a)ti.com> --- common/spl/spl_ymodem.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/common/spl/spl_ymodem.c b/common/spl/spl_ymodem.c index 047df74856..fdd5261042 100644 --- a/common/spl/spl_ymodem.c +++ b/common/spl/spl_ymodem.c @@ -42,6 +42,7 @@ static ulong ymodem_read_fit(struct spl_load_info *load, ulong offset, int res, err, buf_offset; struct ymodem_fit_info *info = load->priv; char *buf = info->buf; + ulong copy_size = size; while (info->image_read < offset) { res = xyzModem_stream_read(buf, BUF_SIZE, &err); @@ -57,8 +58,14 @@ static ulong ymodem_read_fit(struct spl_load_info *load, ulong offset, buf_offset = (info->image_read % BUF_SIZE); else buf_offset = BUF_SIZE; + + if (res > copy_size) { + memcpy(addr, &buf[buf_offset - res], copy_size); + goto done; + } memcpy(addr, &buf[buf_offset - res], res); addr = addr + res; + copy_size -= res; } while (info->image_read < offset + size) { @@ -66,11 +73,17 @@ static ulong ymodem_read_fit(struct spl_load_info *load, ulong offset, if (res <= 0) break; - memcpy(addr, buf, res); info->image_read += res; + if (res > copy_size) { + memcpy(addr, buf, copy_size); + goto done; + } + memcpy(addr, buf, res); addr += res; + copy_size -= res; } +done: return size; } -- 2.35.0

2 1

[PATCH] armv8: spl: Fix build with LINUX_KERNEL_IMAGE_HEADER
by Alper Nebi Yasak 04 Feb '22

04 Feb '22

Setting LINUX_KERNEL_IMAGE_HEADER=y attempts to include an ARM64 Linux kernel image header at the start of both U-Boot proper and SPL binaries. However, some definitions that the image header uses are not included by the SPL linker script, resulting in a build error. Include them the way they are included in U-Boot proper's linker script to fix the error. Signed-off-by: Alper Nebi Yasak <alpernebiyasak(a)gmail.com> --- I won't actually need this header in the SPL, but I need the build to succeed with SPL and this config both selected. I did test that booting bare-metal still works on my rk3399 chromebook_kevin with this. arch/arm/cpu/armv8/u-boot-spl.lds | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/cpu/armv8/u-boot-spl.lds b/arch/arm/cpu/armv8/u-boot-spl.lds index 9edb662b094a..730eb93dbc3b 100644 --- a/arch/arm/cpu/armv8/u-boot-spl.lds +++ b/arch/arm/cpu/armv8/u-boot-spl.lds @@ -84,4 +84,8 @@ SECTIONS /DISCARD/ : { *(.plt*) } /DISCARD/ : { *(.interp*) } /DISCARD/ : { *(.gnu*) } + +#ifdef CONFIG_LINUX_KERNEL_IMAGE_HEADER +#include "linux-kernel-image-header-vars.h" +#endif } -- 2.34.1

2 1

[PATCH] arm: pdu001: Exend the list of maintained files
by Felix Brack 04 Feb '22

04 Feb '22

Add the PDU001 board specific DT files to MAINTAINERS. This should help for better tracking of changes to these files. Signed-off-by: Felix Brack <fb(a)ltec.ch> --- board/eets/pdu001/MAINTAINERS | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/board/eets/pdu001/MAINTAINERS b/board/eets/pdu001/MAINTAINERS index 95295ddea9..6997c8d63e 100644 --- a/board/eets/pdu001/MAINTAINERS +++ b/board/eets/pdu001/MAINTAINERS @@ -1,6 +1,8 @@ PDU001 BOARD M: Felix Brack <fb(a)ltec.ch> S: Maintained -F: board/eets/pdu001/ +F: board/eets/ F: include/configs/pdu001.h F: configs/am335x_pdu001_defconfig +F: arch/arm/dts/am335x-pdu001-u-boot.dtsi +F: arch/arm/dts/am335x-pdu001.dts -- 2.25.1

2 1