December 2022 - U-Boot

[PATCH v5 0/7] binman: rockchip: Migrate from rockchip SPL_FIT_GENERATOR script
by Simon Glass 14 Dec '22

14 Dec '22

At present rockchip 64-bit boards make use of a FIT-generator script written in Python. The script supports splitting an ELF file into several 'loadable' nodes in the FIT. Binman does not current support this feature. This series adds binman support for ELF splitting. This works by adding a new 'fit,operation' property to the FIT subnodes, allowing this new way of generating nodes. Some other fixes and improvements are needed along the way. A new, common binman description is added for 64-bit boards which includes the required u-boot.itb file. The existing script is removed, so that only a few zynq boards are now using a SPL_FIT_GENERATOR script: avnet_ultrazedev_cc_v1_0_ultrazedev_som_v1_0 xilinx_zynqmp_virt Migration of those is hopefully in progress. Note however that tools/k3_fit_atf.sh remains, used by a few boards that enable CONFIG_TI_SECURE_DEVICE so this series is copied there too: am335x_hs_evm am335x_hs_evm_uart am43xx_hs_evm am57xx_hs_evm am57xx_hs_evm_usb am65x_hs_evm_a53 am65x_hs_evm_r5 dra7xx_hs_evm dra7xx_hs_evm_usb j721e_hs_evm_a72 j721e_hs_evm_r5 k2e_hs_evm k2g_hs_evm k2hk_hs_evm k2l_hs_evm Ivan Mikhaylov has sent a patch to help with these, but I need to take a look at the testing side. In any case they should really be using binman for the image generation. Changes in v5: - Update commit message to mention using parts of one image in another - Rename from 'Include binman script in 64-bit boards' - Drop duplicate #include in rk3368-u-boot.dtsi - Keep the name as fit for puma - Drop redundant check for CONFIG_ROCKCHIP_SPI_IMAGE - Drop imply of BINMAN in Kconfig (rely on ARCH_ROCKCHIP instead) - Rename blob to fit for puma and also SPI image - Add new patch to disable USE_SPL_FIT_GENERATOR by default Changes in v3: - Add an offset to the FIT description - Add support for writing sections in binman - Rebase to master Changes in v2: - Rename op-tee to tee-os - Drop use of .itb2 - Drop patches previously applied - Add various suggestions from Alper Nebi Yasak - Add patches to refactor binman's FIT support Simon Glass (7): binman: Allow writing section contents to a file rockchip: evb-rk3288: Drop raw-image support rockchip: Use multiple-images for rk3399 rockchip: Support building the all output files in binman rockchip: Convert all boards to use binman rockchip: Drop the FIT generator script treewide: Disable USE_SPL_FIT_GENERATOR by default Makefile | 11 +- arch/arm/dts/rk3399-puma-haikou-u-boot.dtsi | 4 +- arch/arm/dts/rk3399-u-boot.dtsi | 3 +- arch/arm/dts/rockchip-u-boot.dtsi | 76 ++++- arch/arm/mach-rockchip/make_fit_atf.py | 267 ------------------ boot/Kconfig | 6 +- configs/am335x_evm_defconfig | 1 - configs/am335x_hs_evm_defconfig | 1 - configs/am335x_hs_evm_uart_defconfig | 1 - configs/am43xx_evm_defconfig | 1 - configs/am43xx_evm_rtconly_defconfig | 1 - configs/am43xx_evm_usbhost_boot_defconfig | 1 - configs/am43xx_hs_evm_defconfig | 1 - configs/am57xx_evm_defconfig | 1 - configs/am57xx_hs_evm_defconfig | 1 - configs/am57xx_hs_evm_usb_defconfig | 1 - configs/am65x_evm_a53_defconfig | 1 - configs/am65x_evm_r5_defconfig | 1 - configs/am65x_hs_evm_a53_defconfig | 1 - configs/am65x_hs_evm_r5_defconfig | 1 - ...edev_cc_v1_0_ultrazedev_som_v1_0_defconfig | 1 + configs/cgtqmx8_defconfig | 1 - configs/chromebook_link64_defconfig | 1 - configs/dh_imx6_defconfig | 1 - configs/display5_defconfig | 1 - configs/display5_factory_defconfig | 1 - configs/dra7xx_evm_defconfig | 1 - configs/dra7xx_hs_evm_defconfig | 1 - configs/dra7xx_hs_evm_usb_defconfig | 1 - configs/evb-ast2600_defconfig | 1 - configs/evb-rk3229_defconfig | 1 - configs/evb-rk3288_defconfig | 2 +- configs/gwventana_emmc_defconfig | 1 - configs/gwventana_gw5904_defconfig | 1 - configs/gwventana_nand_defconfig | 1 - configs/imx6qdl_icore_mipi_defconfig | 1 - configs/imx6qdl_icore_mmc_defconfig | 1 - configs/imx6qdl_icore_rqs_defconfig | 1 - configs/imx8mm-cl-iot-gate-optee_defconfig | 1 - configs/imx8mm-cl-iot-gate_defconfig | 1 - configs/imx8mm-icore-mx8mm-ctouch2_defconfig | 1 - configs/imx8mm-icore-mx8mm-edimm2.2_defconfig | 1 - configs/imx8mm-mx8menlo_defconfig | 1 - configs/imx8mm_beacon_defconfig | 1 - configs/imx8mm_data_modul_edm_sbc_defconfig | 1 - configs/imx8mm_evk_defconfig | 1 - configs/imx8mm_evk_fspi_defconfig | 1 - configs/imx8mm_venice_defconfig | 1 - configs/imx8mn_beacon_2g_defconfig | 1 - configs/imx8mn_beacon_defconfig | 1 - configs/imx8mn_bsh_smm_s2_defconfig | 1 - configs/imx8mn_bsh_smm_s2pro_defconfig | 1 - configs/imx8mn_ddr4_evk_defconfig | 1 - configs/imx8mn_evk_defconfig | 1 - configs/imx8mn_var_som_defconfig | 1 - configs/imx8mn_venice_defconfig | 1 - configs/imx8mp-icore-mx8mp-edimm2.2_defconfig | 1 - configs/imx8mp_dhcom_pdk2_defconfig | 1 - configs/imx8mp_evk_defconfig | 1 - configs/imx8mp_rsb3720a1_4G_defconfig | 1 - configs/imx8mp_rsb3720a1_6G_defconfig | 1 - configs/imx8mp_venice_defconfig | 1 - configs/imx8mq_cm_defconfig | 1 - configs/imx8mq_evk_defconfig | 1 - configs/imx8mq_phanbell_defconfig | 1 - configs/imx8qm_rom7720_a1_4G_defconfig | 1 - configs/iot2050_defconfig | 1 - configs/j7200_evm_a72_defconfig | 1 - configs/j7200_evm_r5_defconfig | 1 - configs/j7200_hs_evm_a72_defconfig | 1 - configs/j7200_hs_evm_r5_defconfig | 1 - configs/j721e_evm_a72_defconfig | 1 - configs/j721e_evm_r5_defconfig | 1 - configs/j721e_hs_evm_a72_defconfig | 1 - configs/j721e_hs_evm_r5_defconfig | 1 - configs/j721s2_evm_a72_defconfig | 1 - configs/j721s2_evm_r5_defconfig | 1 - configs/j721s2_hs_evm_a72_defconfig | 1 - configs/j721s2_hs_evm_r5_defconfig | 1 - configs/kontron-sl-mx6ul_defconfig | 1 - configs/kontron-sl-mx8mm_defconfig | 1 - configs/kontron_pitx_imx8m_defconfig | 1 - configs/kontron_sl28_defconfig | 1 - configs/librem5_defconfig | 1 - configs/ls1046ardb_qspi_spl_defconfig | 1 - configs/mccmon6_nor_defconfig | 1 - configs/mccmon6_sd_defconfig | 1 - configs/mx6sabreauto_defconfig | 1 - configs/mx6sabresd_defconfig | 1 - configs/phycore-imx8mm_defconfig | 1 - configs/phycore-imx8mp_defconfig | 1 - configs/pico-imx6_defconfig | 1 - configs/pico-imx8mq_defconfig | 1 - configs/qemu-x86_64_defconfig | 1 - configs/sandbox_noinst_defconfig | 1 - configs/sandbox_spl_defconfig | 1 - configs/sandbox_vpl_defconfig | 1 - configs/socfpga_agilex_atf_defconfig | 1 - configs/socfpga_agilex_vab_defconfig | 1 - configs/socfpga_arria10_defconfig | 1 - configs/socfpga_chameleonv3_defconfig | 1 - configs/socfpga_n5x_atf_defconfig | 1 - configs/socfpga_n5x_vab_defconfig | 1 - configs/socfpga_stratix10_atf_defconfig | 1 - configs/stm32mp15_dhcom_basic_defconfig | 1 - configs/stm32mp15_dhcor_basic_defconfig | 1 - configs/verdin-imx8mm_defconfig | 1 - configs/verdin-imx8mp_defconfig | 1 - configs/wandboard_defconfig | 1 - configs/xilinx_zynq_virt_defconfig | 1 - configs/xilinx_zynqmp_virt_defconfig | 1 + tools/binman/binman.rst | 5 + tools/binman/etype/section.py | 12 +- tools/binman/ftest.py | 14 + tools/binman/image.py | 3 - tools/binman/test/261_section_fname.dts | 29 ++ 116 files changed, 140 insertions(+), 396 deletions(-) delete mode 100755 arch/arm/mach-rockchip/make_fit_atf.py create mode 100644 tools/binman/test/261_section_fname.dts -- 2.39.0.rc1.256.g54fd8350bd-goog

4 12

[PATCH] x86: Fix i8259 ifdef include guard
by Alistair Delva 14 Dec '22

14 Dec '22

When building U-Boot with clang, it notices that the i8259.h include guard does not work correctly due to a typo. Fix it. Signed-off-by: Alistair Delva <adelva(a)google.com> Cc: Simon Glass <sjg(a)chromium.org> Cc: Bin Meng <bmeng.cn(a)gmail.com> Cc: Nick Desaulniers <ndesaulniers(a)google.com> --- arch/x86/include/asm/i8259.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/x86/include/asm/i8259.h b/arch/x86/include/asm/i8259.h index b73052a6d2..90f2d3866c 100644 --- a/arch/x86/include/asm/i8259.h +++ b/arch/x86/include/asm/i8259.h @@ -7,7 +7,7 @@ /* i8259.h i8259 PIC Registers */ #ifndef _ASMI386_I8259_H_ -#define _ASMI386_I8959_H_ +#define _ASMI386_I8259_H_ /* PIC I/O mapped registers */ #define IRR 0x0 /* Interrupt Request Register */ @@ -73,4 +73,4 @@ int i8259_init(void); -#endif /* _ASMI386_I8959_H_ */ +#endif /* _ASMI386_I8259_H_ */ -- 2.30.2

3 2

[PATCH] x86: cosmetic: Fix a typo in the reserve_arch() comments
by Bin Meng 14 Dec '22

14 Dec '22

It should be fsp_continue(). Signed-off-by: Bin Meng <bmeng.cn(a)gmail.com> --- arch/x86/cpu/cpu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/cpu/cpu.c b/arch/x86/cpu/cpu.c index 86f53e78d2..6fe6eaf6c8 100644 --- a/arch/x86/cpu/cpu.c +++ b/arch/x86/cpu/cpu.c @@ -315,7 +315,7 @@ int reserve_arch(void) if (IS_ENABLED(CONFIG_HAVE_FSP)) { /* * Save stack address to CMOS so that at next S3 boot, - * we can use it as the stack address for fsp_contiue() + * we can use it as the stack address for fsp_continue() */ fsp_save_s3_stack(); } -- 2.34.1

2 2

[PATCH 1/5] x86: bayleybay: Adjust CONFIG_TEXT_BASE
by Bin Meng 14 Dec '22

14 Dec '22

At present U-Boot no longer builds as a complete rom for bayleybay. BINMAN .binman_stamp Wrote map file './rom.map' to show errors binman: Section '/binman/rom': contents size 0x814706 (8472326) exceeds section size 0x800000 (8388608) Checking rom.map we see 'fdtmap' section is overlapped with 'intel-vga' and 'intel-fsp' sections: <none> fffa2150 0002a000 u-boot-ucode <none> fffb0000 00010000 intel-vga <none> fffc0000 00038000 intel-fsp <none> fffcc150 00000539 fdtmap Let's adjust CONFIG_TEXT_BASE to allow more space for U-Boot codes. Signed-off-by: Bin Meng <bmeng.cn(a)gmail.com> --- configs/bayleybay_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/configs/bayleybay_defconfig b/configs/bayleybay_defconfig index 5f43f4c0ee..3556fe6b12 100644 --- a/configs/bayleybay_defconfig +++ b/configs/bayleybay_defconfig @@ -1,5 +1,5 @@ CONFIG_X86=y -CONFIG_TEXT_BASE=0xFFF00000 +CONFIG_TEXT_BASE=0xFFE00000 CONFIG_NR_DRAM_BANKS=8 CONFIG_ENV_SIZE=0x1000 CONFIG_ENV_OFFSET=0x6FF000 -- 2.34.1

3 9

[PATCH] cmd: pxe_utils: Limit fdtcontroladdr usage to non-fitImage
by Marek Vasut 14 Dec '22

14 Dec '22

Commit d5ba6188dfb ("cmd: pxe_utils: Check fdtcontroladdr in label_boot") forces '$fdtcontroladdr' DT address as a third parameter of bootm command even if the PXE transfer pulls in a fitImage which contains configuration node with its own DT that is preferrable to be passed to Linux. Limit the $fdtcontroladdr fallback utilization to non-fitImages, since it is highly likely a fitImage would come with its own DT, while single-file images do need a separate DT. Fixes: d5ba6188dfb ("cmd: pxe_utils: Check fdtcontroladdr in label_boot") Signed-off-by: Marek Vasut <marex(a)denx.de> --- Cc: Peter Hoyes <Peter.Hoyes(a)arm.com> Cc: Ramon Fried <rfried.dev(a)gmail.com> Cc: Simon Glass <sjg(a)chromium.org> --- V1: Map the kernel buffer before testing image type --- boot/pxe_utils.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/boot/pxe_utils.c b/boot/pxe_utils.c index 8133006875f..bc998d66bab 100644 --- a/boot/pxe_utils.c +++ b/boot/pxe_utils.c @@ -724,7 +724,10 @@ static int label_boot(struct pxe_context *ctx, struct pxe_label *label) if (!bootm_argv[3]) bootm_argv[3] = env_get("fdt_addr"); - if (!bootm_argv[3]) + kernel_addr_r = genimg_get_kernel_addr(kernel_addr); + buf = map_sysmem(kernel_addr_r, 0); + + if (!bootm_argv[3] && genimg_get_format(buf) != IMAGE_FORMAT_FIT) bootm_argv[3] = env_get("fdtcontroladdr"); if (bootm_argv[3]) { @@ -733,8 +736,6 @@ static int label_boot(struct pxe_context *ctx, struct pxe_label *label) bootm_argc = 4; } - kernel_addr_r = genimg_get_kernel_addr(kernel_addr); - buf = map_sysmem(kernel_addr_r, 0); /* Try bootm for legacy and FIT format image */ if (genimg_get_format(buf) != IMAGE_FORMAT_INVALID && IS_ENABLED(CONFIG_CMD_BOOTM)) -- 2.35.1

1 0

[PATCH 0/2] musb-new: fix omap peripheral support
by Andreas Kemnade 13 Dec '22

13 Dec '22

DM_GADGET did not compile at all, probe was not called in non-gadget mode. Tested on an omap4 board with ums and fastboot command Andreas Kemnade (2): omap4: make musb probeable by simple bus musb-new: omap2430: fix musb probing in gadget mode arch/arm/dts/omap4-u-boot.dtsi | 8 +++++++ drivers/usb/musb-new/omap2430.c | 42 ++++++++++++++++++++------------- 2 files changed, 33 insertions(+), 17 deletions(-) -- 2.30.2

3 7

[PATCH v2] pinctrl: sunxi: Add P2WI and RSB pinmuxes
by Samuel Holland 13 Dec '22

13 Dec '22

P2WI and RSB are used to communicate with a PMIC. Most SoCs have only one possible pinmux. F1C100s has two possibilities, with different mux values, so omit it until some board needs one of them. Signed-off-by: Samuel Holland <samuel(a)sholland.org> --- Changes in v2: - Fix pin list comment for A80 entry drivers/pinctrl/sunxi/pinctrl-sunxi.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/pinctrl/sunxi/pinctrl-sunxi.c b/drivers/pinctrl/sunxi/pinctrl-sunxi.c index 061104be056..c4fbda7a925 100644 --- a/drivers/pinctrl/sunxi/pinctrl-sunxi.c +++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.c @@ -338,6 +338,7 @@ static const struct sunxi_pinctrl_function sun6i_a31_r_pinctrl_functions[] = { { "gpio_in", 0 }, { "gpio_out", 1 }, { "s_i2c", 2 }, /* PL0-PL1 */ + { "s_p2wi", 3 }, /* PL0-PL1 */ { "s_uart", 2 }, /* PL2-PL3 */ }; @@ -404,6 +405,7 @@ static const struct sunxi_pinctrl_function sun8i_a23_r_pinctrl_functions[] = { { "gpio_in", 0 }, { "gpio_out", 1 }, { "s_i2c", 3 }, /* PL0-PL1 */ + { "s_rsb", 2 }, /* PL0-PL1 */ { "s_uart", 2 }, /* PL2-PL3 */ }; @@ -469,6 +471,7 @@ static const struct sunxi_pinctrl_function sun8i_a83t_r_pinctrl_functions[] = { { "gpio_in", 0 }, { "gpio_out", 1 }, { "s_i2c", 2 }, /* PL8-PL9 */ + { "s_rsb", 2 }, /* PL0-PL1 */ { "s_uart", 2 }, /* PL2-PL3 */ }; @@ -574,6 +577,7 @@ static const struct sunxi_pinctrl_function sun9i_a80_r_pinctrl_functions[] = { { "gpio_out", 1 }, { "s_i2c0", 2 }, /* PN0-PN1 */ { "s_i2c1", 3 }, /* PM8-PM9 */ + { "s_rsb", 3 }, /* PN0-PN1 */ { "s_uart", 3 }, /* PL0-PL1 */ }; @@ -615,6 +619,7 @@ static const struct sunxi_pinctrl_function sun50i_a64_r_pinctrl_functions[] = { { "gpio_in", 0 }, { "gpio_out", 1 }, { "s_i2c", 2 }, /* PL8-PL9 */ + { "s_rsb", 2 }, /* PL0-PL1 */ { "s_uart", 2 }, /* PL2-PL3 */ }; @@ -680,6 +685,7 @@ static const struct sunxi_pinctrl_function sun50i_h6_r_pinctrl_functions[] = { { "gpio_in", 0 }, { "gpio_out", 1 }, { "s_i2c", 3 }, /* PL0-PL1 */ + { "s_rsb", 2 }, /* PL0-PL1 */ { "s_uart", 2 }, /* PL2-PL3 */ }; @@ -717,6 +723,7 @@ static const struct sunxi_pinctrl_function sun50i_h616_r_pinctrl_functions[] = { { "gpio_in", 0 }, { "gpio_out", 1 }, { "s_i2c", 3 }, /* PL0-PL1 */ + { "s_rsb", 2 }, /* PL0-PL1 */ { "s_uart", 2 }, /* PL2-PL3 */ }; -- 2.37.4

2 1

hush parameter expansion ${parameter:+word} is backwards compared to bash
by Bob 13 Dec '22

13 Dec '22

I notice that the hush parameter expansion ${parameter:+word} is backwards compared to bash. Here is a test case comparing 'u-boot hush' against 'debian bash'. It shows that at lines 4 and 8, the results are backwards: shell command result u-boot hush result debian-bash ------------------------------------- --------------------- --------------------- 1. var='' 2. echo "\${var} = (${var})" ${var} = () ${var} = () 3. echo "\${var:-bbbb} = (${var:-bbbb})" ${var:-bbbb} = (bbbb) ${var:-bbbb} = (bbbb) 4. echo "\${var:+cccc} = (${var:+cccc})" ${var:+cccc} = (cccc) ${var:+cccc} = () 5. var='aaaa' 6. echo "\${var} = (${var})" ${var} = (aaaa) ${var} = (aaaa) 7. echo "\${var:-bbbb} = (${var:-bbbb})" ${var:-bbbb} = (aaaa) ${var:-bbbb} = (aaaa) 8. echo "\${var:+cccc} = (${var:+cccc})" ${var:+cccc} = () ${var:+cccc} = (cccc) The bash manual says at: https://www.gnu.org/software/bash/manual/html_node/Shell-Parameter-Expansio… ${parameter:+word} ------------------ If parameter is null or unset, nothing is substituted, otherwise the expansion of word is substituted. Example: -------- $ var=123 $ echo ${var:+var is set and not null} var is set and not null

1 0

[PATCH] Makefile: link with --no-warn-rwx-segments
by Tom Rini 13 Dec '22

13 Dec '22

We borrow from the Linux Kernel 0d362be5b142 ("Makefile: link with -z noexecstack --no-warn-rwx-segments") here to disable the RWX segment linking warnings. We do not also bring in -z noexecstack as that requires auditing and using ".note.GNU-stack" on assembly functions which do need this feature. Further, we now introduce KBUILD_EFILDFLAGS so that we can also pass --no-warn-rwx-segments when linking EFI applications, and those do explicitly pass -z execstack. Cc: Heinrich Schuchardt <xypron.glpk(a)gmx.de> Cc: Ilias Apalodimas <ilias.apalodimas(a)linaro.org> Signed-off-by: Tom Rini <trini(a)konsulko.com> --- Makefile | 2 ++ scripts/Makefile.lib | 6 ++++-- 2 files changed, 6 insertions(+), 2 deletions(-) diff --git a/Makefile b/Makefile index 11efc4180414..839733836d9b 100644 --- a/Makefile +++ b/Makefile @@ -806,6 +806,8 @@ KBUILD_CPPFLAGS += $(KCPPFLAGS) KBUILD_AFLAGS += $(KAFLAGS) KBUILD_CFLAGS += $(KCFLAGS) +KBUILD_LDFLAGS += $(call ld-option,--no-warn-rwx-segments) + KBUILD_HOSTCFLAGS += $(if $(CONFIG_TOOLS_DEBUG),-g) # Use UBOOTINCLUDE when you must reference the include/ directory. diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib index 8e13bf2b986d..ac45a8847859 100644 --- a/scripts/Makefile.lib +++ b/scripts/Makefile.lib @@ -425,9 +425,11 @@ cmd_efi_objcopy = $(OBJCOPY) -j .header -j .text -j .sdata -j .data -j \ $(obj)/%.efi: $(obj)/%_efi.so $(call cmd,efi_objcopy) +KBUILD_EFILDFLAGS = -nostdlib -zexecstack -znocombreloc -znorelro +KBUILD_EFILDFLAGS += $(call ld-option,--no-warn-rwx-segments) quiet_cmd_efi_ld = LD $@ -cmd_efi_ld = $(LD) -nostdlib -zexecstack -znocombreloc -T $(EFI_LDS_PATH) \ - -shared -Bsymbolic -znorelro -s $^ -o $@ +cmd_efi_ld = $(LD) $(KBUILD_EFILDFLAGS) -T $(EFI_LDS_PATH) \ + -shared -Bsymbolic -s $^ -o $@ EFI_LDS_PATH = $(srctree)/arch/$(ARCH)/lib/$(EFI_LDS) -- 2.25.1

3 3

[PATCH 0/5] Complete the migration of MTDPARTS_DEFAULT / MTDIDS_DEFAULT
by Patrick Delaunay 13 Dec '22

13 Dec '22

Addition for previous commit a331017c237c ("Complete migration of MTDPARTS_DEFAULT / MTDIDS_DEFAULT, include in environment") Remove the remaining defines MTDPARTS_DEFAULT and MTDIDS_DEFAULT in the configuration files (include/configs/*.h). After this serie, the only remaining references of these 2 defines are located in cmd/mtdparts.c and only for local purpose when CONFIG_MTDIDS_DEFAULT or CONFIG_MTDPART_DEFAULT are not defined. Patrick. Patrick Delaunay (5): configs: am333x_guardian: move MTDIDS_DEFAULT in defconfif configs: x530: move MTDPART/MTDIDS_DEFAULT in defconfig configs: SBx81LIFXCAT: move MTDPART_DEFAULT in defconfig configs: SBx81LIFKW: move MTDPART_DEFAULT in defconfig configs: remove support of MTDIDS_DEFAULT/MTDPARTS_DEFAULT cmd/mtdparts.c | 5 +---- configs/SBx81LIFKW_defconfig | 1 + configs/SBx81LIFXCAT_defconfig | 1 + configs/am335x_guardian_defconfig | 1 + configs/x530_defconfig | 2 ++ drivers/mtd/mtd_uboot.c | 4 ---- include/configs/SBx81LIFKW.h | 1 - include/configs/SBx81LIFXCAT.h | 1 - include/configs/am335x_guardian.h | 1 - include/configs/x530.h | 2 -- 10 files changed, 6 insertions(+), 13 deletions(-) -- 2.25.1

3 8