October 2022 - U-Boot

[PATCH] efi_loader: remove CONFIG_EFI_SETUP_EARLY
by AKASHI Takahiro 21 Oct '22

21 Oct '22

Since the commit a9bf024b2933 ("efi_loader: disk: a helper function to create efi_disk objects from udevice"), CONFIG_EFI_SETUP_EARLY option is by default on and will never be turned off. So just remove this option. Signed-off-by: AKASHI Takahiro <takahiro.akashi(a)linaro.org> --- common/board_r.c | 2 +- lib/efi_loader/Kconfig | 5 ----- lib/efi_loader/efi_setup.c | 43 ++++++++++---------------------------- 3 files changed, 12 insertions(+), 38 deletions(-) diff --git a/common/board_r.c b/common/board_r.c index 92ca2066ee3a..683c045b617c 100644 --- a/common/board_r.c +++ b/common/board_r.c @@ -692,7 +692,7 @@ static init_fnc_t init_sequence_r[] = { /* initialize higher level parts of CPU like time base and timers */ cpu_init_r, #endif -#ifdef CONFIG_EFI_SETUP_EARLY +#ifdef CONFIG_EFI_LOADER efi_init_early, #endif #ifdef CONFIG_CMD_NAND diff --git a/lib/efi_loader/Kconfig b/lib/efi_loader/Kconfig index 41756ea53961..7b50f4b38545 100644 --- a/lib/efi_loader/Kconfig +++ b/lib/efi_loader/Kconfig @@ -42,10 +42,6 @@ config CMD_BOOTEFI_BOOTMGR via UEFI variables Boot####, BootOrder, and BootNext. This enables the 'bootefi bootmgr' command. -config EFI_SETUP_EARLY - bool - default y - choice prompt "Store for non-volatile UEFI variables" default EFI_VARIABLE_FILE_STORE @@ -161,7 +157,6 @@ config EFI_IGNORE_OSINDICATIONS config EFI_CAPSULE_ON_DISK_EARLY bool "Initiate capsule-on-disk at U-Boot boottime" depends on EFI_CAPSULE_ON_DISK - select EFI_SETUP_EARLY help Normally, without this option enabled, capsules will be executed only at the first time of invoking one of efi command. diff --git a/lib/efi_loader/efi_setup.c b/lib/efi_loader/efi_setup.c index 9d7189336dc4..af66076bd3d0 100644 --- a/lib/efi_loader/efi_setup.c +++ b/lib/efi_loader/efi_setup.c @@ -175,16 +175,15 @@ static efi_status_t efi_init_os_indications(void) } /** - * __efi_init_early() - handle initialization at early stage + * efi_init_early() - handle initialization at early stage * - * This function is called in efi_init_obj_list() only if - * !CONFIG_EFI_SETUP_EARLY. + * expected to be called in board_init_r(). * * Return: status code */ -static efi_status_t __efi_init_early(void) +int efi_init_early(void) { - efi_status_t ret = EFI_SUCCESS; + efi_status_t ret; /* Allow unaligned memory access */ allow_unaligned(); @@ -200,29 +199,15 @@ static efi_status_t __efi_init_early(void) /* Initialize EFI driver uclass */ ret = efi_driver_init(); -out: - return ret; -} - -/** - * efi_init_early() - handle initialization at early stage - * - * external version of __efi_init_early(); expected to be called in - * board_init_r(). - * - * Return: status code - */ -int efi_init_early(void) -{ - efi_status_t ret; + if (ret != EFI_SUCCESS) + goto out; - ret = __efi_init_early(); - if (ret != EFI_SUCCESS) { - /* never re-init UEFI subsystem */ - efi_obj_list_initialized = ret; - return -1; - } return 0; +out: + /* never re-init UEFI subsystem */ + efi_obj_list_initialized = ret; + + return -1; } /** @@ -238,12 +223,6 @@ efi_status_t efi_init_obj_list(void) if (efi_obj_list_initialized != OBJ_LIST_NOT_INITIALIZED) return efi_obj_list_initialized; - if (!IS_ENABLED(CONFIG_EFI_SETUP_EARLY)) { - ret = __efi_init_early(); - if (ret != EFI_SUCCESS) - goto out; - } - /* Set up console modes */ efi_setup_console_size(); -- 2.37.3

3 2

[PATCH 1/1] efi_loader: discover if no efi_system_partition is set
by Heinrich Schuchardt 21 Oct '22

21 Oct '22

Variable efi_system_partition holds the efi_system_partition. Currently it is initialized as: { .uclass_id = 0 = UCLASS_ROOT, .denum = 0, .part = 0, } This indicates that host 0:0 is the efi_system_partition and we see output like: => bootefi hello ** Bad device specification host 0 ** Couldn't find partition host 0:0 To identify that no EFI system partition has been set use UCLASS_INVALID. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt(a)canonical.com> --- lib/efi_loader/efi_disk.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/lib/efi_loader/efi_disk.c b/lib/efi_loader/efi_disk.c index cef4e45124..48fdd33a63 100644 --- a/lib/efi_loader/efi_disk.c +++ b/lib/efi_loader/efi_disk.c @@ -19,7 +19,9 @@ #include <part.h> #include <malloc.h> -struct efi_system_partition efi_system_partition; +struct efi_system_partition efi_system_partition = { + .uclass_id = UCLASS_INVALID, +}; const efi_guid_t efi_block_io_guid = EFI_BLOCK_IO_PROTOCOL_GUID; const efi_guid_t efi_system_partition_guid = PARTITION_SYSTEM_GUID; -- 2.37.2

1 0

[PATCH] ARM: dts: at91: sama7g5: fix signal name of pin PB2
by Mihai Sain 21 Oct '22

21 Oct '22

The signal name of pin PB2 with function F is FLEXCOM11_IO1 as it is defined in the datasheet. Fixes: 558378a4cd ("ARM: mach-at91: add support for new SoC sama7g5") Signed-off-by: Mihai Sain <mihai.sain(a)microchip.com> --- arch/arm/dts/sama7g5-pinfunc.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/dts/sama7g5-pinfunc.h b/arch/arm/dts/sama7g5-pinfunc.h index 38d6962d00..b77185f8ed 100644 --- a/arch/arm/dts/sama7g5-pinfunc.h +++ b/arch/arm/dts/sama7g5-pinfunc.h @@ -261,7 +261,7 @@ #define PIN_PB2__FLEXCOM6_IO0 PINMUX_PIN(PIN_PB2, 2, 1) #define PIN_PB2__ADTRG PINMUX_PIN(PIN_PB2, 3, 1) #define PIN_PB2__A20 PINMUX_PIN(PIN_PB2, 4, 1) -#define PIN_PB2__FLEXCOM11_IO0 PINMUX_PIN(PIN_PB2, 6, 3) +#define PIN_PB2__FLEXCOM11_IO1 PINMUX_PIN(PIN_PB2, 6, 3) #define PIN_PB3 35 #define PIN_PB3__GPIO PINMUX_PIN(PIN_PB3, 0, 0) #define PIN_PB3__RF1 PINMUX_PIN(PIN_PB3, 1, 1) -- 2.38.0

2 1

[PATCH] ARM: dts: at91: sam9x60ek: fix indentation for pinctrl sub-nodes
by Dario Binacchi 21 Oct '22

21 Oct '22

The indentation went far on the right due to an extra tab for each pinctrl sub-nodes. Signed-off-by: Dario Binacchi <dario.binacchi(a)amarulasolutions.com> --- arch/arm/dts/sam9x60ek.dts | 36 ++++++++++++++++++------------------ 1 file changed, 18 insertions(+), 18 deletions(-) diff --git a/arch/arm/dts/sam9x60ek.dts b/arch/arm/dts/sam9x60ek.dts index 54c694bd7848..eb44868a3e3e 100644 --- a/arch/arm/dts/sam9x60ek.dts +++ b/arch/arm/dts/sam9x60ek.dts @@ -80,26 +80,26 @@ }; pinctrl { - pinctrl_qspi: qspi { - atmel,pins = - <AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_NONE - AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE - AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP - AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP - AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_PULL_UP - AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; - }; + pinctrl_qspi: qspi { + atmel,pins = + <AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP + AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP + AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_PULL_UP + AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; + }; - pinctrl_flx0: flx0_default { - atmel,pins = - <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE - AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE>; - }; + pinctrl_flx0: flx0_default { + atmel,pins = + <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; - pinctrl_onewire_tm_default: onewire_tm_default { - atmel,pins = - <AT91_PIOD 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; - }; + pinctrl_onewire_tm_default: onewire_tm_default { + atmel,pins = + <AT91_PIOD 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; + }; }; }; -- 2.32.0

3 2

[PATCH] mtd: nand: make Samsung SLC NAND usable again
by Michael Trimarchi 21 Oct '22

21 Oct '22

Upstream linux commit 69fc01296c9281 commit a1286a1fc416 ("mtd: nand: Move Samsung specific init/detection logic in nand_samsung.c") introduced a regression for Samsung SLC NAND chips. Prior to this commit chip->bits_per_cell was initialized by calling nand_get_bits_per_cell() before using nand_is_slc(). With the offending commit this call is skipped, leaving chip->bits_per_cell cleared to zero when the manufacturer specific '.detect' function calls nand_is_slc() which in turn interprets bits_per_cell != 1 as indication for an MLC chip. The effect is that e.g. a K9F1G08U0F NAND chip is falsely detected as MLC NAND with 4KiB page size rather than SLC with 2KiB page size. Add a call to nand_get_bits_per_cell() before calling the .detect hook function in nand_manufacturer_detect(), so that the nand_is_slc() calls in the manufacturer specific code will return correct results. Reported-by: Marcin Gołaś <marcingol30(a)gmail.com> Signed-off-by: Michael Trimarchi <michael(a)amarulasolutions.com> --- drivers/mtd/nand/raw/nand_base.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c index 215b9ba84f..bc61ad03eb 100644 --- a/drivers/mtd/nand/raw/nand_base.c +++ b/drivers/mtd/nand/raw/nand_base.c @@ -4171,10 +4171,13 @@ static void nand_manufacturer_detect(struct nand_chip *chip) * nand_decode_ext_id() otherwise. */ if (chip->manufacturer.desc && chip->manufacturer.desc->ops && - chip->manufacturer.desc->ops->detect) + chip->manufacturer.desc->ops->detect) { + /* The 3rd id byte holds MLC / multichip data */ + chip->bits_per_cell = nand_get_bits_per_cell(chip->id.data[2]); chip->manufacturer.desc->ops->detect(chip); - else + } else { nand_decode_ext_id(chip); + } } /* -- 2.34.1

1 0

[PATCH] mtd: nand: denali: Add SPL image loader
by Jit Loon Lim 21 Oct '22

21 Oct '22

From: Tien Fong Chee <tien.fong.chee(a)intel.com> Add image loader used by the NAND SPL into the full Denali NAND driver. This allows usage of the full Denali NAND driver in SPL instead of the reduced SPL-only version. Signed-off-by: Tien Fong Chee <tien.fong.chee(a)intel.com> Signed-off-by: Jit Loon Lim <jit.loon.lim(a)intel.com> --- drivers/mtd/nand/raw/denali.c | 55 +++++++++++++++++++++++++++++++++++ 1 file changed, 55 insertions(+) diff --git a/drivers/mtd/nand/raw/denali.c b/drivers/mtd/nand/raw/denali.c index c827f80281..499b4acc6e 100644 --- a/drivers/mtd/nand/raw/denali.c +++ b/drivers/mtd/nand/raw/denali.c @@ -7,7 +7,9 @@ #include <common.h> #include <dm.h> +#include <hang.h> #include <malloc.h> +#include <memalign.h> #include <nand.h> #include <asm/cache.h> #include <asm/dma-mapping.h> @@ -1374,3 +1376,56 @@ free_buf: return ret; } + +#ifdef CONFIG_SPL_BUILD +int nand_spl_load_image(u32 offset, u32 len, void *dst) +{ + size_t count = len, actual = 0, page_align_overhead = 0; + u32 page_align_offset = 0; + u8 *page_buffer; + int err = 0; + struct mtd_info *mtd; + + if (!len || !dst) + return -EINVAL; + + mtd = get_nand_dev_by_index(nand_curr_device); + if (!mtd) + hang(); + + if ((offset & (mtd->writesize - 1)) != 0) { + page_buffer = malloc_cache_aligned(mtd->writesize); + if (!page_buffer) { + debug("Error: allocating buffer\n"); + return -ENOMEM; + } + + page_align_overhead = offset % mtd->writesize; + page_align_offset = (offset / mtd->writesize) * mtd->writesize; + count = mtd->writesize; + + err = nand_read_skip_bad(mtd, page_align_offset, &count, + &actual, mtd->size, page_buffer); + + if (err) + return err; + + count -= page_align_overhead; + count = min((size_t)len, count); + memcpy(dst, page_buffer + page_align_overhead, count); + free(page_buffer); + + len -= count; + if (!len) + return err; + + offset += count; + dst += count; + count = len; + } + + return nand_read_skip_bad(mtd, offset, &count, &actual, mtd->size, dst); +} + +void nand_deselect(void) {} +#endif -- 2.26.2

3 2

[PATCH v2 00/28] ARM: Add Rockchip RV1126 support
by Jagan Teki 21 Oct '22

21 Oct '22

RV1126 is a high-performance vision processor SoC for IPC/CVR, especially for AI related application. This patch series add basic core support for Rockchip RV1126 and boot from eMMC and SD. Linux support is under review for the same [2] and v1 can be [3]. Tested RV1126 in Edgeble AI Edge Compute Module 0. Anyone interested, please have a look on this repo [1] Note: I was little late to push this MW due to some issues, hope these would land as soon as possible. [1] https://github.com/edgeble/u-boot/commits/ecm0-v4 [2] https://patchwork.kernel.org/project/linux-arm-kernel/cover/20220818124132.… [3] https://patchwork.ozlabs.org/project/uboot/cover/20220727174050.2214617-1-j… Any inputs? Jagan. Jagan Teki (28): ram: Mark ram-uclass depend on TPL_DM or SPL_DM ram: rockchip: Add common ddr type configs tools: rkcommon: Correct SPL size for px30 ram: rockchip: Compute ddr capacity based on grf split ram: rockchip: Update high row detection for full bw ram: rockchip: Update ddr pctl regs for px30 ram: rockchip: Add rv1126 ddr3 support ram: rockchip: Add rv1126 ddr loader params ram: rockchip: Add rv1126 ddr driver support ram: rockchip: rv1126: Control ddr init prints via DEBUG ram: rockchip: Add rv1126 lpddr4 support pinctrl: rockchip: Add pinctrl route types pinctrl: rockchip: Add rv1126 support arch: rockchip: Add cru header for rv1126 dt-bindings: clk: Add dt-binding header for RV1126 clk: rockchip: Add rv1126 clk support dt-bindings: power: Add power-domain header for rv1126 arm: rockchip: Add grf header for rv1126 ARM: dts: rockchip: Add Rockchip RV1126 pinctrl ARM: dts: rockchip: Add Rockchip RV1126 SoC arm: rockchip: Add RV1126 arch core support arm: rockchip: rv1126: Set dram area unsecure for SPL configs: rockchip: Add rv1126 common config rockchip: mkimage: Add rv1126 support ARM: dts: rockchip: rv1126: Add Edgeble AI Edge Compute Module 0 ARM: dts: rockchip: rv1126: Add Edgeble AI Edge Compute Module 0 Carrier ARM: dts: rockchip: Add rv1126-u-boot.dtsi board: Add Edgeble AI Edge Compute Module 0 Carrier arch/arm/dts/Makefile | 3 + .../rv1126-edgeble-ecm0-carrier-u-boot.dtsi | 10 + arch/arm/dts/rv1126-edgeble-ecm0-carrier.dts | 38 + .../rv1126-edgeble-edge-compute-module-0.dtsi | 329 ++ arch/arm/dts/rv1126-pinctrl.dtsi | 302 ++ arch/arm/dts/rv1126-u-boot.dtsi | 62 + arch/arm/dts/rv1126.dtsi | 500 +++ .../include/asm/arch-rockchip/cru_rv1126.h | 459 +++ .../asm/arch-rockchip/dram_spec_timing.h | 452 +++ .../include/asm/arch-rockchip/grf_rv1126.h | 251 ++ .../include/asm/arch-rockchip/sdram_common.h | 216 +- .../include/asm/arch-rockchip/sdram_msch.h | 12 + .../asm/arch-rockchip/sdram_pctl_px30.h | 100 +- .../asm/arch-rockchip/sdram_phy_rv1126.h | 93 + .../include/asm/arch-rockchip/sdram_rv1126.h | 420 ++ arch/arm/include/asm/arch-rv1126/boot0.h | 11 + arch/arm/include/asm/arch-rv1126/gpio.h | 11 + arch/arm/mach-rockchip/Kconfig | 46 + arch/arm/mach-rockchip/Makefile | 1 + arch/arm/mach-rockchip/rv1126/Kconfig | 55 + arch/arm/mach-rockchip/rv1126/Makefile | 13 + arch/arm/mach-rockchip/rv1126/clk_rv1126.c | 33 + arch/arm/mach-rockchip/rv1126/rv1126.c | 75 + arch/arm/mach-rockchip/rv1126/syscon_rv1126.c | 47 + board/edgeble/edge-compute-module-0/Kconfig | 16 + .../edgeble/edge-compute-module-0/MAINTAINERS | 6 + board/edgeble/edge-compute-module-0/Makefile | 7 + board/edgeble/edge-compute-module-0/ecm0.c | 4 + board/engicam/px30_core/Kconfig | 2 +- common/spl/Kconfig.tpl | 2 +- configs/ecm0-carrier-rv1126_defconfig | 56 + configs/khadas-edge-captain-rk3399_defconfig | 2 +- configs/khadas-edge-rk3399_defconfig | 2 +- configs/khadas-edge-v-rk3399_defconfig | 2 +- configs/leez-rk3399_defconfig | 2 +- configs/nanopi-r4s-rk3399_defconfig | 2 +- configs/pinebook-pro-rk3399_defconfig | 2 +- configs/roc-pc-mezzanine-rk3399_defconfig | 2 +- configs/roc-pc-rk3399_defconfig | 2 +- configs/rock-pi-4-rk3399_defconfig | 2 +- configs/rock-pi-4c-rk3399_defconfig | 2 +- configs/rockpro64-rk3399_defconfig | 2 +- drivers/clk/rockchip/Makefile | 1 + drivers/clk/rockchip/clk_rv1126.c | 1889 +++++++++ drivers/pinctrl/rockchip/Makefile | 1 + drivers/pinctrl/rockchip/pinctrl-px30.c | 11 +- drivers/pinctrl/rockchip/pinctrl-rk3128.c | 11 +- drivers/pinctrl/rockchip/pinctrl-rk322x.c | 11 +- drivers/pinctrl/rockchip/pinctrl-rk3288.c | 11 +- drivers/pinctrl/rockchip/pinctrl-rk3308.c | 11 +- drivers/pinctrl/rockchip/pinctrl-rk3328.c | 11 +- drivers/pinctrl/rockchip/pinctrl-rk3399.c | 11 +- .../pinctrl/rockchip/pinctrl-rockchip-core.c | 45 +- drivers/pinctrl/rockchip/pinctrl-rockchip.h | 58 +- drivers/pinctrl/rockchip/pinctrl-rv1126.c | 416 ++ drivers/ram/Makefile | 2 +- drivers/ram/rockchip/Kconfig | 32 +- drivers/ram/rockchip/Makefile | 1 + .../sdram-rv1126-ddr3-detect-1056.inc | 72 + .../rockchip/sdram-rv1126-ddr3-detect-328.inc | 72 + .../rockchip/sdram-rv1126-ddr3-detect-396.inc | 72 + .../rockchip/sdram-rv1126-ddr3-detect-528.inc | 72 + .../rockchip/sdram-rv1126-ddr3-detect-664.inc | 72 + .../rockchip/sdram-rv1126-ddr3-detect-784.inc | 72 + .../rockchip/sdram-rv1126-ddr3-detect-924.inc | 72 + .../rockchip/sdram-rv1126-loader_params.inc | 198 + .../sdram-rv1126-lpddr4-detect-1056.inc | 78 + .../sdram-rv1126-lpddr4-detect-328.inc | 78 + .../sdram-rv1126-lpddr4-detect-396.inc | 78 + .../sdram-rv1126-lpddr4-detect-528.inc | 78 + .../sdram-rv1126-lpddr4-detect-664.inc | 78 + .../sdram-rv1126-lpddr4-detect-784.inc | 78 + .../sdram-rv1126-lpddr4-detect-924.inc | 78 + drivers/ram/rockchip/sdram_common.c | 62 +- drivers/ram/rockchip/sdram_pctl_px30.c | 6 +- drivers/ram/rockchip/sdram_px30.c | 10 +- drivers/ram/rockchip/sdram_rk3328.c | 2 +- drivers/ram/rockchip/sdram_rk3399.c | 8 +- drivers/ram/rockchip/sdram_rv1126.c | 3543 +++++++++++++++++ include/configs/edge-compute-module-0.h | 21 + include/configs/rv1126_common.h | 42 + .../dt-bindings/clock/rockchip,rv1126-cru.h | 632 +++ .../dt-bindings/power/rockchip,rv1126-power.h | 35 + tools/rkcommon.c | 3 +- 84 files changed, 11656 insertions(+), 132 deletions(-) create mode 100644 arch/arm/dts/rv1126-edgeble-ecm0-carrier-u-boot.dtsi create mode 100644 arch/arm/dts/rv1126-edgeble-ecm0-carrier.dts create mode 100644 arch/arm/dts/rv1126-edgeble-edge-compute-module-0.dtsi create mode 100644 arch/arm/dts/rv1126-pinctrl.dtsi create mode 100644 arch/arm/dts/rv1126-u-boot.dtsi create mode 100644 arch/arm/dts/rv1126.dtsi create mode 100644 arch/arm/include/asm/arch-rockchip/cru_rv1126.h create mode 100644 arch/arm/include/asm/arch-rockchip/dram_spec_timing.h create mode 100644 arch/arm/include/asm/arch-rockchip/grf_rv1126.h create mode 100644 arch/arm/include/asm/arch-rockchip/sdram_phy_rv1126.h create mode 100644 arch/arm/include/asm/arch-rockchip/sdram_rv1126.h create mode 100644 arch/arm/include/asm/arch-rv1126/boot0.h create mode 100644 arch/arm/include/asm/arch-rv1126/gpio.h create mode 100644 arch/arm/mach-rockchip/rv1126/Kconfig create mode 100644 arch/arm/mach-rockchip/rv1126/Makefile create mode 100644 arch/arm/mach-rockchip/rv1126/clk_rv1126.c create mode 100644 arch/arm/mach-rockchip/rv1126/rv1126.c create mode 100644 arch/arm/mach-rockchip/rv1126/syscon_rv1126.c create mode 100644 board/edgeble/edge-compute-module-0/Kconfig create mode 100644 board/edgeble/edge-compute-module-0/MAINTAINERS create mode 100644 board/edgeble/edge-compute-module-0/Makefile create mode 100644 board/edgeble/edge-compute-module-0/ecm0.c create mode 100644 configs/ecm0-carrier-rv1126_defconfig create mode 100644 drivers/clk/rockchip/clk_rv1126.c create mode 100644 drivers/pinctrl/rockchip/pinctrl-rv1126.c create mode 100644 drivers/ram/rockchip/sdram-rv1126-ddr3-detect-1056.inc create mode 100644 drivers/ram/rockchip/sdram-rv1126-ddr3-detect-328.inc create mode 100644 drivers/ram/rockchip/sdram-rv1126-ddr3-detect-396.inc create mode 100644 drivers/ram/rockchip/sdram-rv1126-ddr3-detect-528.inc create mode 100644 drivers/ram/rockchip/sdram-rv1126-ddr3-detect-664.inc create mode 100644 drivers/ram/rockchip/sdram-rv1126-ddr3-detect-784.inc create mode 100644 drivers/ram/rockchip/sdram-rv1126-ddr3-detect-924.inc create mode 100644 drivers/ram/rockchip/sdram-rv1126-loader_params.inc create mode 100644 drivers/ram/rockchip/sdram-rv1126-lpddr4-detect-1056.inc create mode 100644 drivers/ram/rockchip/sdram-rv1126-lpddr4-detect-328.inc create mode 100644 drivers/ram/rockchip/sdram-rv1126-lpddr4-detect-396.inc create mode 100644 drivers/ram/rockchip/sdram-rv1126-lpddr4-detect-528.inc create mode 100644 drivers/ram/rockchip/sdram-rv1126-lpddr4-detect-664.inc create mode 100644 drivers/ram/rockchip/sdram-rv1126-lpddr4-detect-784.inc create mode 100644 drivers/ram/rockchip/sdram-rv1126-lpddr4-detect-924.inc create mode 100644 drivers/ram/rockchip/sdram_rv1126.c create mode 100644 include/configs/edge-compute-module-0.h create mode 100644 include/configs/rv1126_common.h create mode 100644 include/dt-bindings/clock/rockchip,rv1126-cru.h create mode 100644 include/dt-bindings/power/rockchip,rv1126-power.h -- 2.25.1

2 62

[PULL] u-boot-riscv/master
by Leo Liang 20 Oct '22

20 Oct '22

Hi Tom, The following changes since commit 3724ddf157aab3bd009c1da234b9a1af1621b544: Merge branch '2022-10-18-TI-platform-updates' (2022-10-18 18:13:39 -0400) are available in the Git repository at: https://source.denx.de/u-boot/custodians/u-boot-riscv.git for you to fetch changes up to b3b44c674a473bdd3d53cf5196fae897107af619: riscv: ae350: Check firmware_fdt_addr header (2022-10-20 15:26:31 +0800) CI result shows no issue: https://source.denx.de/u-boot/custodians/u-boot-riscv/-/pipelines/13866 ---------------------------------------------------------------- Bin Meng (1): riscv: qemu: spl: Fix booting Linux kernel with OpenSBI 1.0+ Heinrich Schuchardt (5): cmd/sbi: format RustSBI version number cmd/sbi: error message for failure to get spec version cmd/sbi: user friendly short texts riscv: support building double-float modules k210: fix k210_pll_calc_config() Rick Chen (1): riscv: ae350: Check firmware_fdt_addr header Yu Chien Peter Lin (1): riscv: andes_plic.c: use modified IPI scheme arch/riscv/Kconfig | 15 +++++++++++++++ arch/riscv/Makefile | 15 ++++++++++++--- arch/riscv/lib/andes_plic.c | 7 ++++--- board/AndesTech/ax25-ae350/ax25-ae350.c | 2 +- board/emulation/qemu-riscv/Kconfig | 2 +- cmd/riscv/sbi.c | 26 +++++++++++++++----------- drivers/clk/clk_k210.c | 2 +- test/dm/k210_pll.c | 2 +- 8 files changed, 50 insertions(+), 21 deletions(-) Best regards, Leo

2 1

[GIT PULL] clk changes for v2023.01
by Sean Anderson 20 Oct '22

20 Oct '22

The following changes since commit d3ccdc0fce206c1d54fbdc607333de6184e19e75: Merge tag 'efi-2022-10-rc6' of https://source.denx.de/u-boot/custodians/u-boot-efi (2022-09-30 08:30:38 -0400) are available in the Git repository at: https://source.denx.de/u-boot/custodians/u-boot-clk.git tags/clk-2023.01 for you to fetch changes up to 19fb40a5e7ee815a703ffdcc7c0fdb7933762256: clk: update clk_clean_rate_cache to use private clk struct (2022-10-19 12:28:30 -0400) ---------------------------------------------------------------- Clock patches for 2023.01 This contains various fixes (some long overdue) for the next release. ---------------------------------------------------------------- Michal Suchanek (2): clk: change return type of clk_get_parent_rate from long long to ulong rockchip: clk: pll: Fix constant typo Patrick Delaunay (1): clk: update clk_clean_rate_cache to use private clk struct drivers/clk/clk-uclass.c | 20 ++++++++++++++++++-- drivers/clk/rockchip/clk_pll.c | 6 +++--- include/clk.h | 4 ++-- 3 files changed, 23 insertions(+), 7 deletions(-)

2 1

Pull request: u-boot-sunxi/master for 2023.01
by Andre Przywara 20 Oct '22

20 Oct '22

Hi Tom, please pull the first bunch of the sunxi pull request for this cycle. Beside some rather unexciting sync of the DTs from the kernel tree, and some Kconfig cleanup, there are some improvements for the ARMv5 Allwinner family, to support boards with the F1C200s (64MB DRAM) better. We will get actual board support as soon as the DTs have passed the Linux review process. There is also support for the X96 Mate TV Box, featuring the H616 SoC and a full 4GB of DRAM. Also we found the secret to enable SPI booting on the H616 (pin PC5 must be pulled to GND), so the SPI boot support patch is now good to go. Passed the gitlab CI, plus briefly tested on Pine64-LTS, LicheePi Nano, X96 Mate and OrangePi Zero. Thanks, Andre ======================== The following changes since commit e2ff1d0fa777b11ad6b26432cb7613ab433b15d6: Merge tag 'efi-2023-01-rc1-3' of https://source.denx.de/u-boot/custodians/u-boot-efi (2022-10-16 20:23:47 -0400) are available in the Git repository at: https://source.denx.de/u-boot/custodians/u-boot-sunxi.git master for you to fetch changes up to 843ed983a07ee5d8d4e4ac5baa39fc53f12b5f33: suniv: add UART1 support (2022-10-19 14:15:02 +0100) ---------------------------------------------------------------- Andre Przywara (11): sunxi: dts: arm64: update devicetree files sunxi: dts: arm: update devicetree files sunxi: Kconfig: use SoC-wide values for some symbols sunxi: defconfig: drop redundant definitions sunxi: SPL SPI: Add SPI boot support for the Allwinner H616 SoC sunxi: OrangePi Zero 2: Enable SPI booting sunxi: defconfig: Add X96 Mate TV box sunxi: Kconfig: introduce SUNXI_MINIMUM_DRAM_MB sunxi: fix 32MB load address layout suniv: move SKIP_LOWLEVEL_INIT_ONLY into Kconfig suniv: add UART1 support Icenowy Zheng (2): sunxi: fix SUNIV build when enabling D-Cache configs: sunxi: licheepi_nano: enable D-Cache Kconfig | 6 +- arch/arm/dts/Makefile | 3 +- arch/arm/dts/sun4i-a10-inet9f-rev03.dts | 40 ++-- arch/arm/dts/sun4i-a10-pcduino.dts | 6 +- arch/arm/dts/sun50i-a64-amarula-relic.dts | 2 +- arch/arm/dts/sun50i-a64-bananapi-m64.dts | 4 +- arch/arm/dts/sun50i-a64-nanopi-a64.dts | 2 +- arch/arm/dts/sun50i-a64-olinuxino.dts | 30 +++ arch/arm/dts/sun50i-a64-orangepi-win.dts | 6 +- arch/arm/dts/sun50i-a64-pinebook.dts | 4 +- arch/arm/dts/sun50i-a64-pinephone-1.0.dts | 4 + arch/arm/dts/sun50i-a64-pinephone-1.1.dts | 4 + arch/arm/dts/sun50i-a64-teres-i.dts | 8 + arch/arm/dts/sun50i-a64.dtsi | 10 +- arch/arm/dts/sun50i-h5-nanopi-r1s-h5.dts | 4 +- arch/arm/dts/sun50i-h5-orangepi-pc2.dts | 4 +- arch/arm/dts/sun50i-h5-orangepi-prime.dts | 4 +- arch/arm/dts/sun50i-h6-orangepi-3.dts | 4 +- arch/arm/dts/sun50i-h6-orangepi-lite2.dts | 4 +- arch/arm/dts/sun50i-h6-tanix.dtsi | 2 +- arch/arm/dts/sun50i-h6.dtsi | 12 +- arch/arm/dts/sun50i-h616-orangepi-zero2.dts | 55 ++--- arch/arm/dts/sun50i-h616-x96-mate.dts | 177 +++++++++++++++ arch/arm/dts/sun50i-h616.dtsi | 286 ++++++------------------ arch/arm/dts/sun5i-a13-licheepi-one.dts | 6 +- arch/arm/dts/sun6i-a31.dtsi | 13 +- arch/arm/dts/sun7i-a20-pcduino3.dts | 6 +- arch/arm/dts/sun8i-a23-a33.dtsi | 9 +- arch/arm/dts/sun8i-a23-ippo-q8h-v1.2.dts | 74 +----- arch/arm/dts/sun8i-a23-ippo-q8h-v5.dts | 74 +----- arch/arm/dts/sun8i-a33-et-q8-v1.6.dts | 58 +---- arch/arm/dts/sun8i-a33-ippo-q8h-v1.2.dts | 58 +---- arch/arm/dts/sun8i-h2-plus-bananapi-m2-zero.dts | 8 +- arch/arm/dts/sun8i-h2-plus-orangepi-zero.dts | 2 +- arch/arm/dts/sun8i-h3-beelink-x2.dts | 6 +- arch/arm/dts/sun8i-h3-mapleboard-mp130.dts | 6 +- arch/arm/dts/sun8i-h3-nanopi-duo2.dts | 8 +- arch/arm/dts/sun8i-h3-nanopi-neo-air.dts | 2 +- arch/arm/dts/sun8i-h3-nanopi-r1.dts | 4 +- arch/arm/dts/sun8i-h3-nanopi.dtsi | 5 +- arch/arm/dts/sun8i-h3-orangepi-2.dts | 6 +- arch/arm/dts/sun8i-h3-orangepi-lite.dts | 4 +- arch/arm/dts/sun8i-h3-orangepi-one.dts | 4 +- arch/arm/dts/sun8i-h3-orangepi-pc.dts | 4 +- arch/arm/dts/sun8i-r16-bananapi-m2m.dts | 4 +- arch/arm/dts/sun8i-r40-bananapi-m2-ultra.dts | 5 + arch/arm/dts/sun8i-r40-cpu-opp.dtsi | 52 +++++ arch/arm/dts/sun8i-r40-feta40i.dtsi | 5 + arch/arm/dts/sun8i-r40.dtsi | 44 +++- arch/arm/dts/sun8i-t3-cqa3t-bv3.dts | 5 + arch/arm/dts/sun8i-v3s.dtsi | 6 +- arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts | 5 + arch/arm/dts/sun9i-a80.dtsi | 1 - arch/arm/dts/sunxi-bananapi-m2-plus.dtsi | 8 +- arch/arm/dts/sunxi-h3-h5-emlid-neutis.dtsi | 4 +- arch/arm/dts/sunxi-h3-h5.dtsi | 13 +- arch/arm/dts/sunxi-libretech-all-h3-cc.dtsi | 4 +- arch/arm/mach-sunxi/Kconfig | 16 +- arch/arm/mach-sunxi/board.c | 6 +- arch/arm/mach-sunxi/spl_spi_sunxi.c | 27 ++- board/sunxi/MAINTAINERS | 5 + boot/Kconfig | 4 +- cmd/Kconfig | 1 + common/spl/Kconfig | 6 + configs/A10-OLinuXino-Lime_defconfig | 2 - configs/A10s-OLinuXino-M_defconfig | 2 - configs/A13-OLinuXinoM_defconfig | 2 - configs/A13-OLinuXino_defconfig | 2 - configs/A20-OLinuXino-Lime2-eMMC_defconfig | 2 - configs/A20-OLinuXino-Lime2_defconfig | 2 - configs/A20-OLinuXino-Lime_defconfig | 2 - configs/A20-OLinuXino_MICRO-eMMC_defconfig | 2 - configs/A20-OLinuXino_MICRO_defconfig | 2 - configs/A20-Olimex-SOM-EVB_defconfig | 2 - configs/A20-Olimex-SOM204-EVB-eMMC_defconfig | 2 - configs/A20-Olimex-SOM204-EVB_defconfig | 2 - configs/A33-OLinuXino_defconfig | 2 - configs/Ainol_AW1_defconfig | 2 - configs/Ampe_A76_defconfig | 2 - configs/Auxtek-T003_defconfig | 2 - configs/Auxtek-T004_defconfig | 2 - configs/Bananapi_M2_Ultra_defconfig | 2 - configs/Bananapi_defconfig | 2 - configs/Bananapi_m2m_defconfig | 2 - configs/Bananapro_defconfig | 2 - configs/CHIP_defconfig | 2 - configs/CHIP_pro_defconfig | 2 - configs/CSQ_CS908_defconfig | 2 - configs/Chuwi_V7_CW0825_defconfig | 2 - configs/Colombus_defconfig | 2 - configs/Cubieboard2_defconfig | 2 - configs/Cubieboard4_defconfig | 2 - configs/Cubieboard_defconfig | 2 - configs/Cubietruck_defconfig | 2 - configs/Cubietruck_plus_defconfig | 2 - configs/Empire_electronix_d709_defconfig | 2 - configs/Empire_electronix_m712_defconfig | 2 - configs/Hummingbird_A31_defconfig | 2 - configs/Hyundai_A7HD_defconfig | 2 - configs/Itead_Ibox_A20_defconfig | 2 - configs/Lamobo_R1_defconfig | 2 - configs/LicheePi_Zero_defconfig | 2 - configs/Linksprite_pcDuino3_Nano_defconfig | 2 - configs/Linksprite_pcDuino3_defconfig | 2 - configs/Linksprite_pcDuino_defconfig | 2 - configs/MK808C_defconfig | 2 - configs/MSI_Primo73_defconfig | 2 - configs/MSI_Primo81_defconfig | 2 - configs/Marsboard_A10_defconfig | 2 - configs/Mele_A1000G_quad_defconfig | 2 - configs/Mele_A1000_defconfig | 2 - configs/Mele_I7_defconfig | 2 - configs/Mele_M3_defconfig | 2 - configs/Mele_M5_defconfig | 2 - configs/Mele_M9_defconfig | 2 - configs/Merrii_A80_Optimus_defconfig | 2 - configs/Mini-X_defconfig | 2 - configs/Nintendo_NES_Classic_Edition_defconfig | 2 - configs/Orangepi_defconfig | 2 - configs/Orangepi_mini_defconfig | 2 - configs/Sinlinx_SinA31s_defconfig | 2 - configs/Sinlinx_SinA33_defconfig | 2 - configs/Sinovoip_BPI_M2_defconfig | 2 - configs/Sinovoip_BPI_M3_defconfig | 2 - configs/Sunchip_CX-A99_defconfig | 2 - configs/UTOO_P66_defconfig | 2 - configs/Wexler_TAB7200_defconfig | 2 - configs/Wits_Pro_A20_DKT_defconfig | 2 - configs/Wobo_i5_defconfig | 2 - configs/Yones_Toptech_BD1078_defconfig | 2 - configs/Yones_Toptech_BS1078_V2_defconfig | 2 - configs/a64-olinuxino-emmc_defconfig | 3 - configs/a64-olinuxino_defconfig | 3 - configs/amarula_a64_relic_defconfig | 3 - configs/ba10_tv_box_defconfig | 2 - configs/bananapi_m1_plus_defconfig | 2 - configs/bananapi_m2_berry_defconfig | 2 - configs/bananapi_m2_plus_h3_defconfig | 2 - configs/bananapi_m2_plus_h5_defconfig | 3 - configs/bananapi_m2_zero_defconfig | 2 - configs/bananapi_m64_defconfig | 3 - configs/beelink_gs1_defconfig | 3 - configs/beelink_x2_defconfig | 2 - configs/colorfly_e708_q1_defconfig | 2 - configs/difrnce_dit4350_defconfig | 2 - configs/dserve_dsrv9703c_defconfig | 2 - configs/emlid_neutis_n5_devboard_defconfig | 3 - configs/ga10h_v1_1_defconfig | 2 - configs/gt90h_v4_defconfig | 2 - configs/h8_homlet_v2_defconfig | 2 - configs/i12-tvbox_defconfig | 2 - configs/iNet_3F_defconfig | 2 - configs/iNet_3W_defconfig | 2 - configs/iNet_86VS_defconfig | 2 - configs/iNet_D978_rev2_defconfig | 2 - configs/icnova-a20-swac_defconfig | 2 - configs/inet1_defconfig | 2 - configs/inet86dz_defconfig | 2 - configs/inet97fv2_defconfig | 2 - configs/inet98v_rev2_defconfig | 2 - configs/inet9f_rev03_defconfig | 2 - configs/inet_q972_defconfig | 2 - configs/jesurun_q5_defconfig | 2 - configs/libretech_all_h3_cc_h2_plus_defconfig | 2 - configs/libretech_all_h3_cc_h3_defconfig | 2 - configs/libretech_all_h3_cc_h5_defconfig | 3 - configs/libretech_all_h3_it_h5_defconfig | 3 - configs/libretech_all_h5_cc_h5_defconfig | 3 - configs/licheepi_nano_defconfig | 5 - configs/mixtile_loftq_defconfig | 2 - configs/mk802_a10s_defconfig | 2 - configs/mk802_defconfig | 2 - configs/mk802ii_defconfig | 2 - configs/nanopi_a64_defconfig | 3 - configs/nanopi_m1_defconfig | 2 - configs/nanopi_m1_plus_defconfig | 2 - configs/nanopi_neo2_defconfig | 3 - configs/nanopi_neo_air_defconfig | 2 - configs/nanopi_neo_defconfig | 2 - configs/nanopi_neo_plus2_defconfig | 3 - configs/nanopi_r1s_h5_defconfig | 3 - configs/oceanic_5205_5inmfd_defconfig | 3 - configs/orangepi_2_defconfig | 2 - configs/orangepi_3_defconfig | 3 - configs/orangepi_lite2_defconfig | 3 - configs/orangepi_lite_defconfig | 2 - configs/orangepi_one_defconfig | 2 - configs/orangepi_one_plus_defconfig | 3 - configs/orangepi_pc2_defconfig | 3 - configs/orangepi_pc_defconfig | 2 - configs/orangepi_pc_plus_defconfig | 2 - configs/orangepi_plus2e_defconfig | 2 - configs/orangepi_plus_defconfig | 2 - configs/orangepi_prime_defconfig | 3 - configs/orangepi_r1_defconfig | 2 - configs/orangepi_win_defconfig | 3 - configs/orangepi_zero2_defconfig | 5 +- configs/orangepi_zero_defconfig | 2 - configs/orangepi_zero_plus2_defconfig | 3 - configs/orangepi_zero_plus2_h3_defconfig | 2 - configs/orangepi_zero_plus_defconfig | 3 - configs/parrot_r16_defconfig | 2 - configs/pine64-lts_defconfig | 3 - configs/pine64_plus_defconfig | 3 - configs/pine_h64_defconfig | 3 - configs/pinebook_defconfig | 3 - configs/pinecube_defconfig | 2 - configs/pinephone_defconfig | 3 - configs/pinetab_defconfig | 3 - configs/polaroid_mid2407pxe03_defconfig | 2 - configs/polaroid_mid2809pxe04_defconfig | 2 - configs/pov_protab2_ips9_defconfig | 2 - configs/q8_a13_tablet_defconfig | 2 - configs/q8_a23_tablet_800x480_defconfig | 2 - configs/q8_a33_tablet_1024x600_defconfig | 2 - configs/q8_a33_tablet_800x480_defconfig | 2 - configs/r7-tv-dongle_defconfig | 2 - configs/sopine_baseboard_defconfig | 3 - configs/sun8i_a23_evb_defconfig | 2 - configs/sunxi_Gemei_G9_defconfig | 2 - configs/tanix_tx6_defconfig | 3 - configs/tbs_a711_defconfig | 2 - configs/teres_i_defconfig | 3 - configs/x96_mate_defconfig | 15 ++ configs/zeropi_defconfig | 2 - drivers/pinctrl/sunxi/pinctrl-sunxi.c | 1 + include/configs/sunxi-common.h | 49 ++-- include/dt-bindings/clock/sun50i-h6-r-ccu.h | 1 + include/dt-bindings/clock/sun50i-h616-ccu.h | 1 + include/dt-bindings/clock/sun6i-rtc.h | 10 + 230 files changed, 657 insertions(+), 1037 deletions(-) create mode 100644 arch/arm/dts/sun50i-h616-x96-mate.dts mode change 100644 => 120000 arch/arm/dts/sun8i-a23-ippo-q8h-v1.2.dts mode change 100644 => 120000 arch/arm/dts/sun8i-a23-ippo-q8h-v5.dts mode change 100644 => 120000 arch/arm/dts/sun8i-a33-et-q8-v1.6.dts mode change 100644 => 120000 arch/arm/dts/sun8i-a33-ippo-q8h-v1.2.dts create mode 100644 arch/arm/dts/sun8i-r40-cpu-opp.dtsi create mode 100644 configs/x96_mate_defconfig create mode 100644 include/dt-bindings/clock/sun6i-rtc.h

2 1