October 2022 - U-Boot

[PATCH] board: gateworks: gw_ventana: fix mmc env dev
by Tim Harvey 21 Oct '22

21 Oct '22

Fix the MMC env device for boards with eMMC by adding a board_mmc_get_env_dev override to return the boot device as the MMC env device. Signed-off-by: Tim Harvey <tharvey(a)gateworks.com> --- board/gateworks/gw_ventana/gw_ventana.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/board/gateworks/gw_ventana/gw_ventana.c b/board/gateworks/gw_ventana/gw_ventana.c index 99f52b9953e2..68fcc0b1e4fb 100644 --- a/board/gateworks/gw_ventana/gw_ventana.c +++ b/board/gateworks/gw_ventana/gw_ventana.c @@ -1281,3 +1281,8 @@ int ft_board_setup(void *blob, struct bd_info *bd) return 0; } #endif /* CONFIG_OF_BOARD_SETUP */ + +int board_mmc_get_env_dev(int devno) +{ + return devno; +} -- 2.25.1

2 1

[PATCH] arm: dts: imx8mp-venice-gw74xx: fix uart configuration gpio hogs
by Tim Harvey 21 Oct '22

21 Oct '22

Update the UART config gpio hogs such that it is configured for RS232 by default on boot. Additionally rename them to match the names used on the reset of the venice boards. Signed-off-by: Tim Harvey <tharvey(a)gateworks.com> --- arch/arm/dts/imx8mp-venice-gw74xx-u-boot.dtsi | 20 +++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/arch/arm/dts/imx8mp-venice-gw74xx-u-boot.dtsi b/arch/arm/dts/imx8mp-venice-gw74xx-u-boot.dtsi index caee3f66954b..cd91d270dbc6 100644 --- a/arch/arm/dts/imx8mp-venice-gw74xx-u-boot.dtsi +++ b/arch/arm/dts/imx8mp-venice-gw74xx-u-boot.dtsi @@ -116,29 +116,29 @@ line-name = "m2_wdis#"; }; - uart_rs485_hog { + rs485_en { gpio-hog; - gpios = <31 GPIO_ACTIVE_LOW>; + gpios = <31 GPIO_ACTIVE_HIGH>; output-low; - line-name = "uart_rs485"; + line-name = "rs485_en"; }; }; &gpio5 { u-boot,dm-spl; - uart_half_hog { + rs485_half { gpio-hog; - gpios = <0 GPIO_ACTIVE_LOW>; - output-high; - line-name = "uart_half"; + gpios = <0 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "rs485_hd"; }; - uart_term_hog { + rs485_term { gpio-hog; - gpios = <1 GPIO_ACTIVE_LOW>; + gpios = <1 GPIO_ACTIVE_HIGH>; output-low; - line-name = "uart_term"; + line-name = "rs485_term"; }; }; -- 2.25.1

2 1

[PATCH] imx8mn-ddr4-evk-u-boot: Fix broken boot
by Fabio Estevam 21 Oct '22

21 Oct '22

When the imx8mm.dtsi file was pulled in from Linux, the UARTs were moved into an spba sub-node which wasn't being included in the SPL device tree. This meant the references to the UART weren't being handled properly and when booting the system would constantly reboot. Fix this by adding the spba node to the spl device tree to restore normal booting. Based on the patch from Adam Ford for the imx8mn-beacon-kit-u-boot board. Fixes: 4e5114daf9eb ("imx8mn: synchronise device tree with linux") Signed-off-by: Fabio Estevam <festevam(a)denx.de> --- Hi Tom and Stefano, I know today is release day. Could this one be applied directly? It fixes a boot regression. Thanks arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi b/arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi index 78773c198e..3a9ba8b8c9 100644 --- a/arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi +++ b/arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi @@ -26,6 +26,10 @@ u-boot,dm-spl; }; +&spba1 { + u-boot,dm-spl; +}; + &clk { u-boot,dm-spl; u-boot,dm-pre-reloc; -- 2.25.1

3 2

[PATCH] ARM: imx6: dh-imx6: Use sf update instead of sf erase and write
by Marek Vasut 21 Oct '22

21 Oct '22

With sf update fixed to support unaligned start offset, use plain sf update to update the bootloader in SPI NOR. This also helps avoid the case where not enough SPI NOR has been erased and the bootloader has been written to unerased area, and thus corrupted. Signed-off-by: Marek Vasut <marex(a)denx.de> --- Cc: Fabio Estevam <festevam(a)denx.de> Cc: Peng Fan <peng.fan(a)nxp.com> Cc: Stefano Babic <sbabic(a)denx.de> --- include/configs/dh_imx6.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/include/configs/dh_imx6.h b/include/configs/dh_imx6.h index 0f7e1c5c451..2040deb2b87 100644 --- a/include/configs/dh_imx6.h +++ b/include/configs/dh_imx6.h @@ -60,8 +60,7 @@ "fdtfile=imx6q-dhcom-pdk2.dtb\0"\ "update_sf=" /* Erase SPI NOR and install U-Boot from SD */ \ "load mmc 0:1 ${loadaddr} /boot/u-boot-with-spl.imx && "\ - "sf probe && sf erase 0x0 0x100000 && " \ - "sf write ${loadaddr} 0x400 ${filesize}\0" \ + "sf probe && sf update ${loadaddr} 0x400 ${filesize}\0" \ BOOTENV #define BOOT_TARGET_DEVICES(func) \ -- 2.35.1

3 2

[PATCH 1/2] board: tbs2910: Set all board dts files as maintained
by Soeren Moch 21 Oct '22

21 Oct '22

This also includes the imx6q-tbs2910-u-boot.dtsi file now. Signed-off-by: Soeren Moch <smoch(a)web.de> --- Cc: Stefano Babic <sbabic(a)denx.de> Cc: Fabio Estevam <festevam(a)gmail.com> Cc: "NXP i.MX U-Boot Team" <uboot-imx(a)nxp.com> Cc: u-boot(a)lists.denx.de --- board/tbs/tbs2910/MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/board/tbs/tbs2910/MAINTAINERS b/board/tbs/tbs2910/MAINTAINERS index 1e3c0d0ece..72f98d1a69 100644 --- a/board/tbs/tbs2910/MAINTAINERS +++ b/board/tbs/tbs2910/MAINTAINERS @@ -1,7 +1,7 @@ TBS2910 BOARD M: Soeren Moch <smoch(a)web.de> S: Maintained -F: arch/arm/dts/imx6q-tbs2910.dts +F: arch/arm/dts/imx6q-tbs2910* F: board/tbs/tbs2910/ F: configs/tbs2910_defconfig F: doc/board/tbs/ -- 2.34.1

3 6

[PATCH v1] ARM: imx8mp: verdin-imx8mp: Add memory size detection
by sbabic＠denx.de 21 Oct '22

21 Oct '22

> Add RAM auto-sizing, without this change memory size for all SKU is set > to 8GB and the system will crash on SKU with less memory as soon as the > non existent memory addresses are accessed. > Fixes: 2bc2f817cea7 ("board: toradex: add verdin imx8m plus support") > Signed-off-by: Francesco Dolcini <francesco.dolcini(a)toradex.com> > Acked-by: Marcel Ziswiler <marcel.ziswiler(a)toradex.com> Applied to u-boot-imx, master, thanks ! Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic(a)denx.de =====================================================================

1 0

[PATCH v2] nitrogen6x: Remove extra quotes in fdtfile
by Ariel D'Alessandro 21 Oct '22

21 Oct '22

After commit 395110284b56 ("nitrogen6x: Populate FDTFILE at build-time for all platforms") iMX.6Q Sabrelite fails to boot due to a bad fdtfile string: Retrieving file: /dtbs/5.18.0-0.deb11.4-armmp/"imx6q-sabrelite".dtb ** File not found /dtbs/5.18.0-0.deb11.4-armmp/"imx6q-sabrelite".dtb ** CONFIG_DEFAULT_DEVICE_TREE option is string typed, so __stringify() is adding extra quotes. Remove this. Signed-off-by: Ariel D'Alessandro <ariel.dalessandro(a)collabora.com> Reviewed-by: Fabio Estevam <festevam(a)denx.de> --- include/configs/nitrogen6x.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h index 2007b48868..26e6de2d2c 100644 --- a/include/configs/nitrogen6x.h +++ b/include/configs/nitrogen6x.h @@ -76,7 +76,7 @@ "fdt_high=0xffffffff\0" \ "initrd_high=0xffffffff\0" \ "fdt_addr_r=0x18000000\0" \ - "fdtfile=" __stringify(CONFIG_DEFAULT_DEVICE_TREE) ".dtb\0" \ + "fdtfile=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \ "kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ "pxefile_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ "scriptaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ -- 2.37.2

3 2

[PATCH v2] imx8*_venice_defconfig: configure default MMC env device
by Tim Harvey 21 Oct '22

21 Oct '22

When booting from USB/SDP mmc_get_env_dev() returns CONFIG_SYS_MMC_ENV_DEV as the MMC env device (while booting from MMC will call board_mmc_get_env_dev() to get this). Configure CONFIG_SYS_MMC_ENV_DEV for SDHC3 (devno=2) as all Gateworks Venice boards use SDHC3 as eMMC so that persistent env works when booting from USB/SDP. Reviewed-by: Fabio Estevam <festevam(a)denx.de> Signed-off-by: Tim Harvey <tharvey(a)gateworks.com> --- v2: - add Fabio's Reviewed-by tag - fixed spelling error in commit log --- configs/imx8mm_venice_defconfig | 1 + configs/imx8mn_venice_defconfig | 1 + configs/imx8mp_venice_defconfig | 1 + 3 files changed, 3 insertions(+) diff --git a/configs/imx8mm_venice_defconfig b/configs/imx8mm_venice_defconfig index ac0cee9705b0..05be8e4a20b5 100644 --- a/configs/imx8mm_venice_defconfig +++ b/configs/imx8mm_venice_defconfig @@ -75,6 +75,7 @@ CONFIG_SPL_OF_CONTROL=y CONFIG_OF_LIST="imx8mm-venice imx8mm-venice-gw71xx-0x imx8mm-venice-gw72xx-0x imx8mm-venice-gw73xx-0x imx8mm-venice-gw7901 imx8mm-venice-gw7902 imx8mm-venice-gw7903" CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_REDUNDAND_ENVIRONMENT=y +CONFIG_SYS_MMC_ENV_DEV=2 CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="eth0" diff --git a/configs/imx8mn_venice_defconfig b/configs/imx8mn_venice_defconfig index 935de023161a..09287a5ae3f1 100644 --- a/configs/imx8mn_venice_defconfig +++ b/configs/imx8mn_venice_defconfig @@ -78,6 +78,7 @@ CONFIG_SPL_OF_CONTROL=y CONFIG_OF_LIST="imx8mn-venice imx8mn-venice-gw7902" CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_REDUNDAND_ENVIRONMENT=y +CONFIG_SYS_MMC_ENV_DEV=2 CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="eth0" diff --git a/configs/imx8mp_venice_defconfig b/configs/imx8mp_venice_defconfig index 7fdde41b6da5..9013a1164e9b 100644 --- a/configs/imx8mp_venice_defconfig +++ b/configs/imx8mp_venice_defconfig @@ -77,6 +77,7 @@ CONFIG_SPL_OF_CONTROL=y CONFIG_OF_LIST="imx8mp-venice imx8mp-venice-gw74xx" CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_REDUNDAND_ENVIRONMENT=y +CONFIG_SYS_MMC_ENV_DEV=2 CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_IP_DEFRAG=y -- 2.25.1

3 2

[PATCH v2] apalis/colibri_imx6/-imx6ull/_imx7: update env memory layout
by Marcel Ziswiler 21 Oct '22

21 Oct '22

From: Marcel Ziswiler <marcel.ziswiler(a)toradex.com> Update the distro config env memory layout for the Apalis iMX6, Colibri iMX6, Colibri iMX6ULL and Colibri iMX7: - loadaddr=0x84200000 (resp. 0x14200000 on them i.MX 6) allows for 64MB area for uncompressing (ie FIT images) - fdt_addr_r = loadaddr + 64MB : allows for 64MB kernel - scriptaddr = fdt_addr_r + 512KB : allows for 512KB fdt - pxefile_addr_r = scriptaddr + 512KB : allows for 512KB script - ramdisk_addr_r = pxefile_addr_r + 512KB : allows for 1MB extlinux.conf Memory layout analogous to 64-bit one from commit fd5c7173ade4 ("imx8m{m,n}_venice: update env memory layout") but left pxefile_addr_r updated according to doc/develop/distro.rst. This fixes a potential issue caused by the compressed kernel being relocated on top of the ramdisk causing its corruption. Signed-off-by: Marcel Ziswiler <marcel.ziswiler(a)toradex.com> --- Changes in v2: - Changed i.MX 6 addressing back to starting from 0x10000000 instead of 0x80000000. configs/apalis_imx6_defconfig | 1 + configs/colibri-imx6ull-emmc_defconfig | 1 + configs/colibri-imx6ull_defconfig | 1 + configs/colibri_imx6_defconfig | 1 + configs/colibri_imx7_defconfig | 1 + configs/colibri_imx7_emmc_defconfig | 1 + include/configs/apalis_imx6.h | 10 +++++----- include/configs/colibri-imx6ull.h | 10 +++++----- include/configs/colibri_imx6.h | 10 +++++----- include/configs/colibri_imx7.h | 10 +++++----- 10 files changed, 26 insertions(+), 20 deletions(-) diff --git a/configs/apalis_imx6_defconfig b/configs/apalis_imx6_defconfig index 5960aef698f..2689e8d9846 100644 --- a/configs/apalis_imx6_defconfig +++ b/configs/apalis_imx6_defconfig @@ -22,6 +22,7 @@ CONFIG_SPL_MMC=y CONFIG_SPL_SERIAL=y CONFIG_SPL=y CONFIG_CMD_HDMIDETECT=y +CONFIG_SYS_LOAD_ADDR=0x14200000 CONFIG_AHCI=y CONFIG_SYS_MEMTEST_START=0x10000000 CONFIG_SYS_MEMTEST_END=0x10010000 diff --git a/configs/colibri-imx6ull-emmc_defconfig b/configs/colibri-imx6ull-emmc_defconfig index e6ed9b5fd0f..02b6be0a2b4 100644 --- a/configs/colibri-imx6ull-emmc_defconfig +++ b/configs/colibri-imx6ull-emmc_defconfig @@ -10,6 +10,7 @@ CONFIG_DM_GPIO=y CONFIG_TARGET_COLIBRI_IMX6ULL_EMMC=y CONFIG_DEFAULT_DEVICE_TREE="imx6ull-colibri-emmc-eval-v3" CONFIG_SYS_PROMPT="Colibri iMX6ULL # " +CONFIG_SYS_LOAD_ADDR=0x84200000 CONFIG_SYS_MEMTEST_START=0x80000000 CONFIG_SYS_MEMTEST_END=0x88000000 CONFIG_DISTRO_DEFAULTS=y diff --git a/configs/colibri-imx6ull_defconfig b/configs/colibri-imx6ull_defconfig index d65f2533ca2..cc0a3473941 100644 --- a/configs/colibri-imx6ull_defconfig +++ b/configs/colibri-imx6ull_defconfig @@ -11,6 +11,7 @@ CONFIG_DM_GPIO=y CONFIG_TARGET_COLIBRI_IMX6ULL_NAND=y CONFIG_DEFAULT_DEVICE_TREE="imx6ull-colibri-eval-v3" CONFIG_SYS_PROMPT="Colibri iMX6ULL # " +CONFIG_SYS_LOAD_ADDR=0x84200000 CONFIG_SYS_MEMTEST_START=0x80000000 CONFIG_SYS_MEMTEST_END=0x88000000 CONFIG_DISTRO_DEFAULTS=y diff --git a/configs/colibri_imx6_defconfig b/configs/colibri_imx6_defconfig index 5cf398b09e2..135095b275d 100644 --- a/configs/colibri_imx6_defconfig +++ b/configs/colibri_imx6_defconfig @@ -22,6 +22,7 @@ CONFIG_SPL_MMC=y CONFIG_SPL_SERIAL=y CONFIG_SPL=y CONFIG_CMD_HDMIDETECT=y +CONFIG_SYS_LOAD_ADDR=0x14200000 CONFIG_SYS_MEMTEST_START=0x10000000 CONFIG_SYS_MEMTEST_END=0x10010000 CONFIG_DISTRO_DEFAULTS=y diff --git a/configs/colibri_imx7_defconfig b/configs/colibri_imx7_defconfig index dfdb74f69b0..28872639b61 100644 --- a/configs/colibri_imx7_defconfig +++ b/configs/colibri_imx7_defconfig @@ -11,6 +11,7 @@ CONFIG_SYS_PROMPT="Colibri iMX7 # " CONFIG_IMX_RDC=y CONFIG_IMX_BOOTAUX=y CONFIG_IMX_HAB=y +CONFIG_SYS_LOAD_ADDR=0x84200000 CONFIG_OF_BOARD_FIXUP=y CONFIG_SYS_MEMTEST_START=0x80000000 CONFIG_SYS_MEMTEST_END=0x8c000000 diff --git a/configs/colibri_imx7_emmc_defconfig b/configs/colibri_imx7_emmc_defconfig index 033ce1747bf..c12717b4f25 100644 --- a/configs/colibri_imx7_emmc_defconfig +++ b/configs/colibri_imx7_emmc_defconfig @@ -12,6 +12,7 @@ CONFIG_ARMV7_BOOT_SEC_DEFAULT=y CONFIG_IMX_RDC=y CONFIG_IMX_BOOTAUX=y CONFIG_IMX_HAB=y +CONFIG_SYS_LOAD_ADDR=0x84200000 CONFIG_SYS_MEMTEST_START=0x80000000 CONFIG_SYS_MEMTEST_END=0x8c000000 CONFIG_DISTRO_DEFAULTS=y diff --git a/include/configs/apalis_imx6.h b/include/configs/apalis_imx6.h index 4922b063309..8f338943475 100644 --- a/include/configs/apalis_imx6.h +++ b/include/configs/apalis_imx6.h @@ -70,11 +70,11 @@ #define MEM_LAYOUT_ENV_SETTINGS \ "bootm_size=0x20000000\0" \ - "fdt_addr_r=0x12100000\0" \ - "kernel_addr_r=0x11000000\0" \ - "pxefile_addr_r=0x17100000\0" \ - "ramdisk_addr_r=0x12200000\0" \ - "scriptaddr=0x17000000\0" + "fdt_addr_r=0x18200000\0" \ + "kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ + "pxefile_addr_r=0x18300000\0" \ + "ramdisk_addr_r=0x18400000\0" \ + "scriptaddr=0x18280000\0" #define CONFIG_EXTRA_ENV_SETTINGS \ BOOTENV \ diff --git a/include/configs/colibri-imx6ull.h b/include/configs/colibri-imx6ull.h index 04cde9530ad..79b1284cc7a 100644 --- a/include/configs/colibri-imx6ull.h +++ b/include/configs/colibri-imx6ull.h @@ -43,11 +43,11 @@ #define MEM_LAYOUT_ENV_SETTINGS \ "bootm_size=0x10000000\0" \ - "fdt_addr_r=0x82100000\0" \ - "kernel_addr_r=0x81000000\0" \ - "pxefile_addr_r=0x87100000\0" \ - "ramdisk_addr_r=0x82200000\0" \ - "scriptaddr=0x87000000\0" + "fdt_addr_r=0x88200000\0" \ + "kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ + "pxefile_addr_r=0x88300000\0" \ + "ramdisk_addr_r=0x88400000\0" \ + "scriptaddr=0x88280000\0" #define UBI_BOOTCMD \ "ubiargs=ubi.mtd=ubi root=ubi0:rootfs rw rootfstype=ubifs " \ diff --git a/include/configs/colibri_imx6.h b/include/configs/colibri_imx6.h index 3c220e0d6e3..d8b87366238 100644 --- a/include/configs/colibri_imx6.h +++ b/include/configs/colibri_imx6.h @@ -66,11 +66,11 @@ #define MEM_LAYOUT_ENV_SETTINGS \ "bootm_size=0x10000000\0" \ - "fdt_addr_r=0x12100000\0" \ - "kernel_addr_r=0x11000000\0" \ - "pxefile_addr_r=0x17100000\0" \ - "ramdisk_addr_r=0x12200000\0" \ - "scriptaddr=0x17000000\0" + "fdt_addr_r=0x18200000\0" \ + "kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ + "pxefile_addr_r=0x18300000\0" \ + "ramdisk_addr_r=0x18400000\0" \ + "scriptaddr=0x18280000\0" #define CONFIG_EXTRA_ENV_SETTINGS \ BOOTENV \ diff --git a/include/configs/colibri_imx7.h b/include/configs/colibri_imx7.h index 9543e0233ee..b8d0dc959a7 100644 --- a/include/configs/colibri_imx7.h +++ b/include/configs/colibri_imx7.h @@ -83,11 +83,11 @@ #define MEM_LAYOUT_ENV_SETTINGS \ "bootm_size=0x10000000\0" \ - "fdt_addr_r=0x82000000\0" \ - "kernel_addr_r=0x81000000\0" \ - "pxefile_addr_r=0x87100000\0" \ - "ramdisk_addr_r=0x82100000\0" \ - "scriptaddr=0x87000000\0" + "fdt_addr_r=0x88200000\0" \ + "kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ + "pxefile_addr_r=0x88300000\0" \ + "ramdisk_addr_r=0x88400000\0" \ + "scriptaddr=0x88280000\0" #define UBI_BOOTCMD \ "ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \ -- 2.35.1

2 1

[PATCH v2 00/12] Puma RK3399 migration to TPL and numerous fixes
by Quentin Schulz 21 Oct '22

21 Oct '22

From: Quentin Schulz <quentin.schulz(a)theobroma-systems.com> Puma RK3399 SoM struggled for a few releases already to boot because the SPL was too big. Therefore, let's migrate to TPL like most RK3399-boards already did a few releases ago. This also fixes numerous issues around fallback booting (U-Boot proper corrupted on the storage medium from where TPL/SPL was loaded) and default order of boot targets. It also forces the environment storage medium to be the same as the one from which U-Boot proper was loaded, for a more consistent user experience. The environment can also be stored on SPI flash now. Finally some cleanup and the migration of the flashing instructions to u-boot-rockchip.bin and u-boot-rockchip-spi.bin. A small patch for Lion RK3368 also, for migrating the flashing instructions to u-boot-rockchip.bin. Cheers, Quentin v2: - rebase on top of latest master, - removed dependency on patch removing SPL_PAD_TO by moving the "custom" SPL payload offset to puma/lion u-boot dtsi, Quentin Schulz (12): rockchip: puma-rk3399: fix boot_targets swap depending on U-Boot proper load medium rockchip: puma-rk3399: use gpio-hog instead of fixed-regulator for enabling eMMC/SPI-NOR rockchip: puma-rk3399: allow non-SD-Card-loaded SPL to load U-Boot proper from SD-Card rockchip: puma-rk3399: remove unused default ENV_OFFSET for SPI flashes rockchip: puma-rk3399: load environment from same MMC as used for loading U-Boot proper rockchip: puma-rk3399: allow loading environment from SPI-NOR flash rockchip: puma-rk3399: load environment from same medium as one used to load U-Boot proper rockchip: puma-rk3399: remove useless CONFIG_SYS_SPI_U_BOOT_OFFS rockchip: puma-rk3399: migrate to TPL rockchip: puma-rk3399: migrate to u-boot-rockchip.bin rockchip: lion-rk3368: migrate to u-boot-rockchip.bin rockchip: puma-rk3399: migrate to u-boot-rockchip-spi.bin arch/arm/dts/rk3368-lion-haikou-u-boot.dtsi | 8 ++ arch/arm/dts/rk3399-puma-haikou-u-boot.dtsi | 75 ++++++++++++----- board/theobroma-systems/lion_rk3368/README | 9 +- board/theobroma-systems/puma_rk3399/Kconfig | 3 - board/theobroma-systems/puma_rk3399/README | 22 ++--- .../puma_rk3399/puma-rk3399.c | 84 ++++++++++++++++--- configs/puma-rk3399_defconfig | 16 ++-- 7 files changed, 153 insertions(+), 64 deletions(-) -- 2.37.3

4 20