September 2021 - U-Boot

boot using encrypted
by Cedrick Kukela 14 Sep '21

14 Sep '21

Hello Guys, I am in the process of configuring u-boot so that I can boot an encrypted zImage. I was looking for a guide or documentation to make sure my understanding of what I need to do is correct. Could anyone point me in the correct direction? Thank you Cedrick

1 0

[PATCH] image: fit: fix byte order for crc32 hash check
by Mathew McBride 14 Sep '21

14 Sep '21

In 92055e138f ("image: Drop if/elseif hash selection in calculate_hash()") the FIT image hash verification code was simplified to use the hash API. This broke verification of CRC32 hash FIT images (e.g NXP MC firmware) as the hash API crc32 calculates in big endian (refer commit 74a18ee8a563, "crc32: Correct endianness of crc32 result"), whereas the previous call directly to crc32_wd does not do a byteswap. Example: dumpimage -l qoriq-mc-binary/ls1088a/mc_ls1088a_10.29.1.itb FIT description: MC Firmware Created: Fri Aug 27 14:14:32 2021 ... Hash algo: crc32 Hash value: c09d959c Was returning FB9D3710 to fit_image_check_hash instead of C09D959C Correct the byte order in the crc32_uimage_fixup so the little endian values are returned. Fixes: 92055e138f "image: Drop if/elseif hash selection in calculate_hash()" Signed-off-by: Mathew McBride <matt(a)traverse.com.au> --- common/image-fit.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/common/image-fit.c b/common/image-fit.c index 92d9141bcd..97b4f0b4b2 100644 --- a/common/image-fit.c +++ b/common/image-fit.c @@ -1195,6 +1195,11 @@ int fit_set_timestamp(void *fit, int noffset, time_t timestamp) static void crc32_uimage_fixup(void *value) { + /* In the CRC32 case, value will be byte swapped by the hash library + * function, but the FIT is specified (and checked) in little-endian + */ + *((uint32_t *)value) = ntohl(*((uint32_t *)value)); + /* TODO: In C, this type punning is undefined behavior: */ *((uint32_t *)value) = cpu_to_uimage(*((uint32_t *)value)); } -- 2.30.1

2 1

[PATCH v2 0/6] Call phy_config at port probe time for the Felix DSA driver
by Vladimir Oltean 14 Sep '21

14 Sep '21

Changes in v2: Rebased on top of the master branch (solves this conflict: https://patchwork.ozlabs.org/project/uboot/patch/20210629170839.2583797-4-o… with Tim Harvey's patch to make DSA masters promiscuous) This series makes the Felix DSA driver initialize all its connected PHYs regardless of whether those will be used for networking or not. This is in order to satisfy the expectations of some software in later boot stages. To make this work, it is necessary to introduce a new method in struct dsa_ops: .port_probe(). There is some further refactoring/cleanup along the way. Vladimir Oltean (6): net: dsa: felix: felix_init() can be static net: dsa: use "err" instead of "ret" in dsa_port_probe net: dsa: refactor the code to set the port MAC address into a dedicated function net: dsa: introduce a .port_probe() method in struct dsa_ops net: dsa: felix: call phy_config at .port_probe() time net: dsa: felix: propagate the error code from phy_startup() drivers/net/mscc_eswitch/felix_switch.c | 28 ++++++----- include/net/dsa.h | 5 +- net/dsa-uclass.c | 62 +++++++++++++++---------- 3 files changed, 59 insertions(+), 36 deletions(-) -- 2.25.1

2 12

[PATCH v6 0/4] riscv: enable SBI system reset
by Heinrich Schuchardt 14 Sep '21

14 Sep '21

With SBI v0.3 a system reset extension is available. This allows to implement reboot and poweroff in U-Boot in a system independent way. * Provide missing constants * Provide a system reset driver using the system reset extension. v6: * enable SYSRESET_SBI for qemu-riscvXX_spl_defconfig v5: * add a configuration actually using the driver * don't add __efi_runtime in arch/riscv/lib/sbi.c * use '=' not ':' in array initialization with enum indices * enable SYSRESET_SBI for qemu-riscvXX_smode_defconfig v4: * remove the UEFI SystemReset() implementation * simplify the code using an array to translate reset types * remove a superfluos check to determine if the device was probed v3: add SBI_HSM_HART_STATUS_SUSPENDED, SBI_HSM_HART_STATUS_SUSPEND_PENDING, SBI_HSM_HART_STATUS_RESUME_PENDING v2: correct constants that were blindly copied from Linux Heinrich Schuchardt (4): riscv: add missing SBI extension definitions cmd/sbi: use constants instead of numerical values sysreset: provide SBI based sysreset driver configs: enable SYSRESET_SBI on qemu-riscvXX_smode_defconfig MAINTAINERS | 1 + arch/riscv/cpu/cpu.c | 13 ++++++- arch/riscv/include/asm/sbi.h | 40 ++++++++++++++++++++-- arch/riscv/lib/sbi.c | 12 +++++++ cmd/riscv/sbi.c | 30 ++++++++-------- configs/qemu-riscv32_smode_defconfig | 1 + configs/qemu-riscv32_spl_defconfig | 1 + configs/qemu-riscv64_smode_defconfig | 1 + configs/qemu-riscv64_spl_defconfig | 1 + drivers/sysreset/Kconfig | 12 +++++++ drivers/sysreset/Makefile | 1 + drivers/sysreset/sysreset_sbi.c | 51 ++++++++++++++++++++++++++++ 12 files changed, 146 insertions(+), 18 deletions(-) create mode 100644 drivers/sysreset/sysreset_sbi.c -- 2.32.0

3 6

[PATCH] riscv: image: Use the first DRAM bank for bootm_low
by Samuel Holland 14 Sep '21

14 Sep '21

bootm_low is used as a base address is used to allocate space for the FDT blob, initrd, cmdline, etc. when booting Linux. Set the default value for RISC-V to the start of the first DRAM bank, so platforms can get their DRAM layout from the device tree, and do not need to define CONFIG_SYS_SDRAM_BASE. Signed-off-by: Samuel Holland <samuel(a)sholland.org> --- common/image.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/common/image.c b/common/image.c index 59c52a1f9ad..1f06413bfa6 100644 --- a/common/image.c +++ b/common/image.c @@ -682,7 +682,7 @@ ulong env_get_bootm_low(void) #if defined(CONFIG_SYS_SDRAM_BASE) return CONFIG_SYS_SDRAM_BASE; -#elif defined(CONFIG_ARM) || defined(CONFIG_MICROBLAZE) +#elif defined(CONFIG_ARM) || defined(CONFIG_MICROBLAZE) || defined(CONFIG_RISCV) return gd->bd->bi_dram[0].start; #else return 0; -- 2.31.1

2 1

ECC strength for device tree with imx6 processor
by Torrelli, Maxime 14 Sep '21

14 Sep '21

Hello dear U-Boot members, We recently tried to add support for a nand Flash (Micron MT29F4G08ABAEAWP among others) from U-Boot 2020.04 on an iMX6DL processor. We try to configure the ECC strength to 16 bits through the DTSI but when the U-Boot is started, the command mtd list returns that the ECC strength is 8 bits. An extract of our defconfig : CONFIG_NAND_MXS=y CONFIG_CMD_NAND=y CONFIG_NAND_MXS_DT=y CONFIG_MTD_RAW_NAND=y CONFIG_DM_MTD=y Content of our configs/*.h file : #define CONFIG_SYS_NAND_ONFI_DETECTION Content of our *.dtsi file : &gpmi { pinctrl-names = "default"; pinctrl-0 = <&configure_nandflash_pins>; status = "okay"; nand-ecc-strength=<16>; nand-ecc-step-size=<512>; nand-on-flash-bbt; }; I dug into the source code of the drivers and found out the function nand_dt_init (nand_base.c) reads the nand-ecc-strength property form the dtsi and puts its value into chip->ecc.strength. Whereas, when the function mxs_nand_set_geometry (mxs_nand.c) calls mxs_nand_calc_ecc_layout_by_info, instead of using chip->ecc.strength as a parameter of mxs_nand_calc_ecc_layout_by_info, it uses chip->ecc_strength_ds. The ecc_strength_ds value is set to 8 bits by nand_flash_detect_onfi (nand_base.c) which reads the ONFI data of our Nand. I have tried to remove the define CONFIG_SYS_NAND_ONFI_DETECTION, but doing so the driver uses Legacy BCH Geometry and set the ECC strength to 8 bits. I managed to get the driver to work by changing the following line from the function mxs_nand_set_geometry (mxs_nand.c) : return mxs_nand_calc_ecc_layout_by_info(geo, mtd, chip->ecc_strength_ds, chip->ecc_step_ds); changed to return mxs_nand_calc_ecc_layout_by_info(geo, mtd, chip->ecc.strength, chip->ecc_step_ds); Even though this quick fix solves our issue, I have no clue if it works with all the different configurations supported by the U-Boot. If you have any suggestion to solve this issue, please let me know. And if you have any question, I will do my utmost to answer. Salutations/Greetings, Maxime Torrelli Embbeded Software Engineer Conduent Business Solutions France [cid:image001.png@01D7A951.8A9B5600] 1 rue Claude Chappe 07500 Guilherand-Granges T +334 75 81 56 81 maxime.torrelli(a)conduent.com<mailto:maxime.torrelli@conduent.com> Through our dedicated associates, we deliver mission-critical services and solutions on behalf of businesses and governments - creating exceptional outcomes for our clients and the millions of people who count on them. Learn more at www.conduent.com<https://www.conduent.com/>.

1 0

[PATCH] efi_loader: Fix spec ID event creation
by Ruchika Gupta 14 Sep '21

14 Sep '21

TCG EFI Protocol Specification defines the number_of_algorithms field in spec ID event to be equal to the number of active algorithms supported by the TPM device. In current implementation, this field is populated with the count of all algorithms supported by the TPM which leads to incorrect spec ID event creation. Similarly, the algorithm array in spec ID event should be a variable length array with length being equal to the number_of_algorithms field. In current implementation this is defined as a fixed length array which has been fixed. Signed-off-by: Ruchika Gupta <ruchika.gupta(a)linaro.org> CC: Masahisa Kojima <masahisa.kojima(a)linaro.org> CC: Ilias Apalodimas <ilias.apalodimas(a)linaro.org> CC: Heinrich Schuchardt <xypron.glpk(a)gmx.de> --- include/efi_tcg2.h | 7 +------ lib/efi_loader/efi_tcg2.c | 40 ++++++++++++++++++++++----------------- 2 files changed, 24 insertions(+), 23 deletions(-) diff --git a/include/efi_tcg2.h b/include/efi_tcg2.h index c99384fb00..6c9f448a26 100644 --- a/include/efi_tcg2.h +++ b/include/efi_tcg2.h @@ -165,8 +165,6 @@ struct tcg_efi_spec_id_event_algorithm_size { * @digest_sizes: array of number_of_algorithms pairs * 1st member defines the algorithm id * 2nd member defines the algorithm size - * @vendor_info_size: size in bytes for vendor specific info - * @vendor_info: vendor specific info */ struct tcg_efi_spec_id_event { u8 signature[16]; @@ -176,10 +174,7 @@ struct tcg_efi_spec_id_event { u8 spec_errata; u8 uintn_size; u32 number_of_algorithms; - struct tcg_efi_spec_id_event_algorithm_size digest_sizes[TPM2_NUM_PCR_BANKS]; - u8 vendor_info_size; - /* U-Boot does not provide any vendor info */ - u8 vendor_info[]; + struct tcg_efi_spec_id_event_algorithm_size digest_sizes[]; } __packed; /** diff --git a/lib/efi_loader/efi_tcg2.c b/lib/efi_loader/efi_tcg2.c index b268a02976..3fd6bc30a1 100644 --- a/lib/efi_loader/efi_tcg2.c +++ b/lib/efi_loader/efi_tcg2.c @@ -575,9 +575,10 @@ static efi_status_t tcg2_create_digest(const u8 *input, u32 length, EFI_PRINT("Unsupported algorithm %x\n", hash_alg); return EFI_INVALID_PARAMETER; } + digest_list->digests[digest_list->count].hash_alg = hash_alg; + memcpy(&digest_list->digests[digest_list->count].digest, final, + (u32)alg_to_len(hash_alg)); digest_list->count++; - digest_list->digests[i].hash_alg = hash_alg; - memcpy(&digest_list->digests[i].digest, final, (u32)alg_to_len(hash_alg)); } return EFI_SUCCESS; @@ -798,8 +799,9 @@ static efi_status_t tcg2_hash_pe_image(void *efi, u64 efi_size, EFI_PRINT("Unsupported algorithm %x\n", hash_alg); return EFI_INVALID_PARAMETER; } - digest_list->digests[i].hash_alg = hash_alg; - memcpy(&digest_list->digests[i].digest, hash, (u32)alg_to_len(hash_alg)); + digest_list->digests[digest_list->count].hash_alg = hash_alg; + memcpy(&digest_list->digests[digest_list->count].digest, hash, + (u32)alg_to_len(hash_alg)); digest_list->count++; } @@ -1123,7 +1125,7 @@ static efi_status_t create_specid_event(struct udevice *dev, void *buffer, struct tcg_efi_spec_id_event *spec_event; size_t spec_event_size; efi_status_t ret = EFI_DEVICE_ERROR; - u32 active = 0, supported = 0; + u32 active = 0, supported = 0, pcr_count = 0, alg_count = 0; int err; size_t i; @@ -1145,25 +1147,29 @@ static efi_status_t create_specid_event(struct udevice *dev, void *buffer, TCG_EFI_SPEC_ID_EVENT_SPEC_VERSION_ERRATA_TPM2; spec_event->uintn_size = sizeof(efi_uintn_t) / sizeof(u32); - err = tpm2_get_pcr_info(dev, &supported, &active, - &spec_event->number_of_algorithms); + err = tpm2_get_pcr_info(dev, &supported, &active, &pcr_count); + if (err) goto out; - if (spec_event->number_of_algorithms > MAX_HASH_COUNT || - spec_event->number_of_algorithms < 1) - goto out; - for (i = 0; i < spec_event->number_of_algorithms; i++) { + for (i = 0; i < pcr_count; i++) { u16 hash_alg = hash_algo_list[i].hash_alg; u16 hash_len = hash_algo_list[i].hash_len; - if (active && alg_to_mask(hash_alg)) { + if (active & alg_to_mask(hash_alg)) { put_unaligned_le16(hash_alg, - &spec_event->digest_sizes[i].algorithm_id); + &spec_event->digest_sizes[alg_count].algorithm_id); put_unaligned_le16(hash_len, - &spec_event->digest_sizes[i].digest_size); + &spec_event->digest_sizes[alg_count].digest_size); + alg_count++; } } + + spec_event->number_of_algorithms = alg_count; + if (spec_event->number_of_algorithms > MAX_HASH_COUNT || + spec_event->number_of_algorithms < 1) + goto out; + /* * the size of the spec event and placement of vendor_info_size * depends on supported algoriths @@ -1172,9 +1178,9 @@ static efi_status_t create_specid_event(struct udevice *dev, void *buffer, offsetof(struct tcg_efi_spec_id_event, digest_sizes) + spec_event->number_of_algorithms * sizeof(spec_event->digest_sizes[0]); /* no vendor info for us */ - memset(buffer + spec_event_size, 0, - sizeof(spec_event->vendor_info_size)); - spec_event_size += sizeof(spec_event->vendor_info_size); + memset(buffer + spec_event_size, 0, 1); + /* add a byte for vendor_info_size in the spec event */ + spec_event_size += 1; *event_size = spec_event_size; return EFI_SUCCESS; -- 2.25.1

2 1

[PATCH] mtd: spi-nor-ids: Reinstate Micron MT25QL02G
by Marek Vasut 14 Sep '21

14 Sep '21

This ID disappeared in 5b66fdb29dc ("mtd: spi: Remove unused files"), add the ID back, since the chip is used on devices supported by U-Boot. Fixes: 5b66fdb29dc ("mtd: spi: Remove unused files") Signed-off-by: Marek Vasut <marex(a)denx.de> Cc: Horatiu Vultur <horatiu.vultur(a)microchip.com> Cc: Jagan Teki <jagan(a)amarulasolutions.com> Cc: Simon Goldschmidt <simon.k.r.goldschmidt(a)gmail.com> Cc: Stefan Roese <sr(a)denx.de> Cc: Vignesh R <vigneshr(a)ti.com> --- drivers/mtd/spi/spi-nor-ids.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/mtd/spi/spi-nor-ids.c b/drivers/mtd/spi/spi-nor-ids.c index 4aef1ddd6e2..6bf7c30a8e8 100644 --- a/drivers/mtd/spi/spi-nor-ids.c +++ b/drivers/mtd/spi/spi-nor-ids.c @@ -195,6 +195,7 @@ const struct flash_info spi_nor_ids[] = { { INFO("n25q00a", 0x20bb21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) }, { INFO("mt25ql01g", 0x21ba20, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) }, { INFO("mt25qu02g", 0x20bb22, 0, 64 * 1024, 4096, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) }, + { INFO("mt25ql02g", 0x20ba22, 0, 64 * 1024, 4096, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) }, #ifdef CONFIG_SPI_FLASH_MT35XU { INFO("mt35xu512aba", 0x2c5b1a, 0, 128 * 1024, 512, USE_FSR | SPI_NOR_OCTAL_READ | SPI_NOR_4B_OPCODES | SPI_NOR_OCTAL_DTR_READ) }, #endif /* CONFIG_SPI_FLASH_MT35XU */ -- 2.33.0

1 0

Pull request: u-boot-sunxi/master for v2021.10
by Andre Przywara 14 Sep '21

14 Sep '21

Hi Tom, please pull the master branch from u-boot-sunxi, containing a fix for U-Boot 2021.10 to bring back MMC boot on older boards. Build-tested on all 158 sunxi boards, boot tested on some of them. Thanks, Andre ============== The following changes since commit 7958292f5ffa4ecdaaf4c73c6df28006051db6e0: Merge tag 'mmc-2021-9-13' of https://source.denx.de/u-boot/custodians/u-boot-mmc (2021-09-13 08:31:41 -0400) are available in the Git repository at: https://source.denx.de/u-boot/custodians/u-boot-sunxi.git master for you to fetch changes up to 0b508ca821d383b2fd68f4b581cf606e329fff36: sunxi: mmc: A20: Fix MMC optimisation (2021-09-14 00:02:10 +0100) ---------------------------------------------------------------- Andre Przywara (1): sunxi: mmc: A20: Fix MMC optimisation drivers/mmc/sunxi_mmc.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-)

2 1

[PATCH v2 00/32] pci: Drop all pre-driver model code
by Simon Glass 14 Sep '21

14 Sep '21

The hard work to actually enable DM_PCI everywhere was done recently. This series attempts to drop most of the code that it no-longer needed now that PCI has been converted to driver model. It also drops the UCP1020 board since it has various unique build issues. It doesn't even support driver model so it seems reasonable to just remove it. The DM_PCI option disappears and only PCI is left. We can drop about 50 ad-hoc CONFIGs also, but this series doesn't do that since it is probably best done when the CONFIGs are resynced. It does include a CONFIG resync patch which can be dropped if that is done separately. Changes in v2: - Update to mention DM_PCI instead - Fix tag to 'mips' from 'ppc' Simon Glass (32): pci: Drop old code from pci command ppc: Remove UCP1020 board pci: Drop old code from header file pci: Remove guard around compatibility functions pci: Drop DM_PCI check from fdtdec pci: Drop DM_PCI check from pci_common ppc: Drop CONFIG_SYS_PCI_SUBSYS_VENDORID pci: powerpc: Drop old code pci: freescale: Drop old code pci: dm: core: Drop DM_PCI check from devfdt_get_addr_pci() ppc: Drop DM_PCI from config files pci: acpi: Drop DM_PCI check from ahci pci: usb: Drop DM_PCI from ohci ppc: malta: Drop use of DM_PCI ppc: socrates: Drop use of DM_PCI pci: gt64120: Drop use of DM_PCI pci: msc01: Drop use of DM_PCI pci: imx: Drop use of DM_PCI pci: scsi: pci: Drop DM_PCI check from scsi pci: Drop DM_PCI check from bios_emul net: Drop DM_PCI check from designware driver pci: imx: Drop DM_PCI check from cpu driver pci: arm: mvebu: Drop DM_PCI check from pci: sata_sil: Drop DM_PCI checks distro_bootcmd: Drop DM_PCI check pci: Drop pci_init_board() pci: ppc: Drop ftpci100 driver ppc: Drop idt8t49n222a_serdes_clk driver ppc: Drop t4qds and b4860qds references pci: Drop PCI_INDIRECT_BRIDGE pci: Drop DM_PCI pci: Drop migration method .azure-pipelines.yml | 4 +- README | 3 - arch/Kconfig | 1 - arch/arm/Kconfig | 2 +- arch/arm/mach-imx/cpu.c | 4 - arch/arm/mach-imx/mx6/Kconfig | 2 +- arch/arm/mach-mvebu/arm64-common.c | 5 +- arch/mips/Kconfig | 2 +- arch/nds32/include/asm/arch-ag102/ag102.h | 2 - arch/powerpc/cpu/mpc83xx/pci.c | 160 ---- arch/powerpc/cpu/mpc85xx/Makefile | 1 - arch/powerpc/cpu/mpc85xx/pci.c | 191 ---- board/Arcturus/ucp1020/Kconfig | 28 +- board/Arcturus/ucp1020/MAINTAINERS | 7 - board/Arcturus/ucp1020/Makefile | 31 - board/Arcturus/ucp1020/README | 54 -- board/Arcturus/ucp1020/cmd_arc.c | 408 --------- board/Arcturus/ucp1020/ddr.c | 161 ---- board/Arcturus/ucp1020/law.c | 24 - board/Arcturus/ucp1020/spl.c | 127 --- board/Arcturus/ucp1020/spl_minimal.c | 67 -- board/Arcturus/ucp1020/tlb.c | 100 --- board/Arcturus/ucp1020/ucp1020.c | 372 -------- board/Arcturus/ucp1020/ucp1020.h | 45 - board/cavium/thunderx/thunderx.c | 7 - board/emulation/qemu-riscv/Kconfig | 1 - board/freescale/common/Makefile | 1 - board/freescale/common/cds_pci_ft.c | 59 -- .../common/idt8t49n222a_serdes_clk.c | 208 ----- .../common/idt8t49n222a_serdes_clk.h | 106 --- board/freescale/common/p_corenet/Makefile | 1 - board/freescale/common/p_corenet/pci.c | 25 - board/freescale/mpc8349emds/pci.c | 73 -- board/freescale/mpc837xerdb/Makefile | 1 - board/freescale/mpc837xerdb/pci.c | 109 --- board/freescale/mpc8548cds/mpc8548cds.c | 114 --- board/freescale/p1010rdb/p1010rdb.c | 11 - board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c | 11 - board/freescale/t102xrdb/Makefile | 1 - board/freescale/t102xrdb/pci.c | 25 - board/freescale/t104xrdb/Makefile | 1 - board/freescale/t104xrdb/pci.c | 25 - board/freescale/t208xqds/Makefile | 1 - board/freescale/t208xqds/pci.c | 25 - board/freescale/t208xrdb/Makefile | 1 - board/freescale/t208xrdb/pci.c | 25 - board/freescale/t4rdb/Makefile | 1 - board/freescale/t4rdb/pci.c | 25 - board/imgtec/malta/malta.c | 67 -- board/socionext/developerbox/Kconfig | 1 - board/socrates/socrates.c | 4 +- board/xes/common/fsl_8xxx_pci.c | 50 -- cmd/pci.c | 212 ----- common/Kconfig | 1 - configs/UCP1020_defconfig | 58 -- doc/board/freescale/b4860qds.rst | 453 ---------- doc/board/freescale/index.rst | 1 - doc/develop/driver-model/migration.rst | 9 - drivers/ata/ahci.c | 55 -- drivers/ata/sata_sil.c | 8 - drivers/ata/sata_sil.h | 4 - drivers/bios_emulator/atibios.c | 98 --- drivers/bios_emulator/bios.c | 39 - drivers/core/fdtaddr.c | 3 +- drivers/gpio/Kconfig | 2 +- drivers/i2c/Makefile | 2 +- drivers/net/Kconfig | 6 +- drivers/net/designware.c | 22 +- drivers/net/mscc_eswitch/Kconfig | 2 +- drivers/pci/Kconfig | 40 +- drivers/pci/Makefile | 2 - drivers/pci/pci_common.c | 4 +- drivers/pci/pci_ftpci100.c | 319 ------- drivers/pci/pci_gt64120.c | 64 -- drivers/pci/pci_indirect.c | 71 -- drivers/pci/pci_msc01.c | 64 -- drivers/pci/pcie_imx.c | 81 -- drivers/scsi/scsi.c | 6 - drivers/spi/Kconfig | 2 +- drivers/usb/host/ohci-hcd.c | 15 +- drivers/virtio/Kconfig | 2 +- include/ahci.h | 4 - include/bios_emul.h | 16 - include/config_distro_bootcmd.h | 5 - include/configs/MPC8349EMDS.h | 5 - include/configs/MPC8349EMDS_SDRAM.h | 5 - include/configs/MPC837XERDB.h | 3 - include/configs/MPC8540ADS.h | 2 - include/configs/MPC8548CDS.h | 16 - include/configs/MPC8560ADS.h | 2 - include/configs/P1010RDB.h | 28 - include/configs/P2041RDB.h | 17 - include/configs/T102xRDB.h | 17 - include/configs/T104xRDB.h | 20 - include/configs/T208xQDS.h | 20 - include/configs/T208xRDB.h | 20 - include/configs/T4240RDB.h | 21 - include/configs/UCP1020.h | 832 ------------------ include/configs/corenet_ds.h | 21 - include/configs/p1_p2_rdb_pc.h | 24 - include/configs/t4qds.h | 240 ----- include/init.h | 3 - include/pci.h | 76 +- lib/fdtdec.c | 10 +- scripts/config_whitelist.txt | 6 - test/dm/Makefile | 2 +- 106 files changed, 55 insertions(+), 5785 deletions(-) delete mode 100644 arch/powerpc/cpu/mpc85xx/pci.c delete mode 100644 board/Arcturus/ucp1020/MAINTAINERS delete mode 100644 board/Arcturus/ucp1020/Makefile delete mode 100644 board/Arcturus/ucp1020/README delete mode 100644 board/Arcturus/ucp1020/cmd_arc.c delete mode 100644 board/Arcturus/ucp1020/ddr.c delete mode 100644 board/Arcturus/ucp1020/law.c delete mode 100644 board/Arcturus/ucp1020/spl.c delete mode 100644 board/Arcturus/ucp1020/spl_minimal.c delete mode 100644 board/Arcturus/ucp1020/tlb.c delete mode 100644 board/Arcturus/ucp1020/ucp1020.c delete mode 100644 board/Arcturus/ucp1020/ucp1020.h delete mode 100644 board/freescale/common/idt8t49n222a_serdes_clk.c delete mode 100644 board/freescale/common/idt8t49n222a_serdes_clk.h delete mode 100644 board/freescale/common/p_corenet/pci.c delete mode 100644 board/freescale/mpc837xerdb/pci.c delete mode 100644 board/freescale/t102xrdb/pci.c delete mode 100644 board/freescale/t104xrdb/pci.c delete mode 100644 board/freescale/t208xqds/pci.c delete mode 100644 board/freescale/t208xrdb/pci.c delete mode 100644 board/freescale/t4rdb/pci.c delete mode 100644 configs/UCP1020_defconfig delete mode 100644 doc/board/freescale/b4860qds.rst delete mode 100644 drivers/pci/pci_ftpci100.c delete mode 100644 drivers/pci/pci_indirect.c delete mode 100644 include/configs/UCP1020.h delete mode 100644 include/configs/t4qds.h -- 2.32.0.554.ge1b32706d8-goog

3 72