September 2021 - U-Boot

[PATCH 1/1] fs: btrfs: avoid superfluous messages
by Heinrich Schuchardt 16 Sep '21

16 Sep '21

Output like the following is quite irritating: => bootefi hello Scanning disk mmc2.blk... No valid Btrfs found Bad magic number for SquashFS image. ** Unrecognized filesystem type ** Scanning disk mmc1.blk... No valid Btrfs found Bad magic number for SquashFS image. ** Unrecognized filesystem type ** Scanning disk mmc0.blk... No valid Btrfs found Bad magic number for SquashFS image. ** Unrecognized filesystem type ** It is expected that most partitions don't contain a Btrfs. This is only worth a debug message. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt(a)canonical.com> --- fs/btrfs/disk-io.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index 12f9579fcf..7a4fb0d259 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0+ #include <common.h> #include <fs_internal.h> +#include <log.h> #include <uuid.h> #include <memalign.h> #include "kernel-shared/btrfs_tree.h" @@ -918,7 +919,7 @@ static int btrfs_scan_fs_devices(struct blk_desc *desc, ret = btrfs_scan_one_device(desc, part, fs_devices, &total_devs); if (ret) { - fprintf(stderr, "No valid Btrfs found\n"); + log_debug("No valid Btrfs found\n"); return ret; } return 0; -- 2.32.0

3 2

[PATCH] mailmap: Update mail address for Nicolas Saenz julienne
by Nicolas Saenz Julienne 16 Sep '21

16 Sep '21

From: Nicolas Saenz Julienne <nsaenz(a)kernel.org> The @suse.de address doesn't exist anymore. Update it to something not dependent on my workplace. Signed-off-by: Nicolas Saenz Julienne <nsaenz(a)kernel.org> --- .mailmap | 1 + 1 file changed, 1 insertion(+) diff --git a/.mailmap b/.mailmap index b76f02283c..b09fc321bd 100644 --- a/.mailmap +++ b/.mailmap @@ -32,6 +32,7 @@ Jagan Teki <jagannadha.sutradharudu-teki(a)xilinx.com> Igor Opaniuk <igor.opaniuk(a)gmail.com> <igor.opaniuk(a)linaro.org> Igor Opaniuk <igor.opaniuk(a)gmail.com> <igor.opaniuk(a)toradex.com> Markus Klotzbuecher <mk(a)denx.de> +Nicolas Saenz Julienne <nsaenz(a)kernel.org> <nsaenzjulienne(a)suse.de> Patrice Chotard <patrice.chotard(a)foss.st.com> <patrice.chotard(a)st.com> Patrick Delaunay <patrick.delaunay(a)foss.st.com> <patrick.delaunay(a)st.com> Paul Burton <paul.burton(a)mips.com> <paul.burton(a)imgtec.com> -- 2.31.1

2 1

RFC: exclude partitions from efi_selftest
by Michael Lawnick 16 Sep '21

16 Sep '21

Hi, in our environment we get error on efi_selftest if one of several SSD partitions isn't properly initialized (due to some other error, but that's a different topic). I tried to track down to where the partitions get registered for test but got a bit lost so I request advice from you. Shouldn't be the registering of partitions for self test been made dependent on successful basic init? I wouldn't qualify a non-initialized partition as reason to let self test fail. If at all a warning should be sufficient. As far as I understand efi self test is intended more as a functional regression test, not a H/W system test, isn't it? What about the idea to allow to exclude partitions by environment variable? KR Michael

4 16

[PATCH v3] apalis/colibri_imx6: move setting bootcmd to defconfig
by Oleksandr Suvorov 16 Sep '21

16 Sep '21

Move setting the default boot command to the apalis/colibri_imx6_defconfig. It allows replacing the command without code modification. Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov(a)foundries.io> Reviewed-by: Peng Fan <peng.fan(a)nxp.com> Reviewed-by: Igor Opaniuk <igor.opaniuk(a)foundries.io> --- Changes in v3: - fix Peng Fan's e-mail address Changes in v2: - fix spaces after semicolon. - add reviewed-by records. configs/apalis_imx6_defconfig | 1 + configs/colibri_imx6_defconfig | 1 + include/configs/apalis_imx6.h | 4 ---- include/configs/colibri_imx6.h | 4 ---- 4 files changed, 2 insertions(+), 8 deletions(-) diff --git a/configs/apalis_imx6_defconfig b/configs/apalis_imx6_defconfig index a0e85ba23a4..f64b1ca4378 100644 --- a/configs/apalis_imx6_defconfig +++ b/configs/apalis_imx6_defconfig @@ -23,6 +23,7 @@ CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg" CONFIG_BOOTDELAY=1 +CONFIG_BOOTCOMMAND="run distro_bootcmd; usb start; setenv stdout serial,vidconsole; setenv stdin serial,usbkbd" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_BOARD_EARLY_INIT_F=y diff --git a/configs/colibri_imx6_defconfig b/configs/colibri_imx6_defconfig index 47b1cfb1917..373d6476ddc 100644 --- a/configs/colibri_imx6_defconfig +++ b/configs/colibri_imx6_defconfig @@ -22,6 +22,7 @@ CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg" CONFIG_BOOTDELAY=1 +CONFIG_BOOTCOMMAND="run distro_bootcmd; usb start; setenv stdout serial,vidconsole; setenv stdin serial,usbkbd" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_BOARD_EARLY_INIT_F=y diff --git a/include/configs/apalis_imx6.h b/include/configs/apalis_imx6.h index 12de0105c6c..ade479cb943 100644 --- a/include/configs/apalis_imx6.h +++ b/include/configs/apalis_imx6.h @@ -133,10 +133,6 @@ #endif #define CONFIG_EXTRA_ENV_SETTINGS \ BOOTENV \ - "bootcmd=run distro_bootcmd ; " \ - "usb start ; " \ - "setenv stdout serial,vidconsole; " \ - "setenv stdin serial,usbkbd\0" \ "boot_file=zImage\0" \ "console=ttymxc0\0" \ "defargs=enable_wait_mode=off vmalloc=400M\0" \ diff --git a/include/configs/colibri_imx6.h b/include/configs/colibri_imx6.h index 804a144a03e..f91d6b49ea8 100644 --- a/include/configs/colibri_imx6.h +++ b/include/configs/colibri_imx6.h @@ -115,10 +115,6 @@ #define FDT_FILE "imx6dl-colibri-eval-v3.dtb" #define CONFIG_EXTRA_ENV_SETTINGS \ BOOTENV \ - "bootcmd=run distro_bootcmd; " \ - "usb start ; " \ - "setenv stdout serial,vidconsole; " \ - "setenv stdin serial,usbkbd\0" \ "boot_file=zImage\0" \ "console=ttymxc0\0" \ "defargs=enable_wait_mode=off galcore.contiguousSize=50331648\0" \ -- 2.31.1

1 0

[PATCH v2] apalis/colibri_imx6: move setting bootcmd to defconfig
by Oleksandr Suvorov 16 Sep '21

16 Sep '21

Move setting the default boot command to the apalis/colibri_imx6_defconfig. It allows replacing the command without code modification. Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov(a)foundries.io> Reviewed-by: Peng Fan <peng.fna(a)nxp.com> Reviewed-by: Igor Opaniuk <igor.opaniuk(a)foundries.io> --- Changes in v2: - fix spaces after semicolon. - add reviewed-by records. configs/apalis_imx6_defconfig | 1 + configs/colibri_imx6_defconfig | 1 + include/configs/apalis_imx6.h | 4 ---- include/configs/colibri_imx6.h | 4 ---- 4 files changed, 2 insertions(+), 8 deletions(-) diff --git a/configs/apalis_imx6_defconfig b/configs/apalis_imx6_defconfig index a0e85ba23a4..f64b1ca4378 100644 --- a/configs/apalis_imx6_defconfig +++ b/configs/apalis_imx6_defconfig @@ -23,6 +23,7 @@ CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg" CONFIG_BOOTDELAY=1 +CONFIG_BOOTCOMMAND="run distro_bootcmd; usb start; setenv stdout serial,vidconsole; setenv stdin serial,usbkbd" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_BOARD_EARLY_INIT_F=y diff --git a/configs/colibri_imx6_defconfig b/configs/colibri_imx6_defconfig index 47b1cfb1917..373d6476ddc 100644 --- a/configs/colibri_imx6_defconfig +++ b/configs/colibri_imx6_defconfig @@ -22,6 +22,7 @@ CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg" CONFIG_BOOTDELAY=1 +CONFIG_BOOTCOMMAND="run distro_bootcmd; usb start; setenv stdout serial,vidconsole; setenv stdin serial,usbkbd" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_BOARD_EARLY_INIT_F=y diff --git a/include/configs/apalis_imx6.h b/include/configs/apalis_imx6.h index 12de0105c6c..ade479cb943 100644 --- a/include/configs/apalis_imx6.h +++ b/include/configs/apalis_imx6.h @@ -133,10 +133,6 @@ #endif #define CONFIG_EXTRA_ENV_SETTINGS \ BOOTENV \ - "bootcmd=run distro_bootcmd ; " \ - "usb start ; " \ - "setenv stdout serial,vidconsole; " \ - "setenv stdin serial,usbkbd\0" \ "boot_file=zImage\0" \ "console=ttymxc0\0" \ "defargs=enable_wait_mode=off vmalloc=400M\0" \ diff --git a/include/configs/colibri_imx6.h b/include/configs/colibri_imx6.h index 804a144a03e..f91d6b49ea8 100644 --- a/include/configs/colibri_imx6.h +++ b/include/configs/colibri_imx6.h @@ -115,10 +115,6 @@ #define FDT_FILE "imx6dl-colibri-eval-v3.dtb" #define CONFIG_EXTRA_ENV_SETTINGS \ BOOTENV \ - "bootcmd=run distro_bootcmd; " \ - "usb start ; " \ - "setenv stdout serial,vidconsole; " \ - "setenv stdin serial,usbkbd\0" \ "boot_file=zImage\0" \ "console=ttymxc0\0" \ "defargs=enable_wait_mode=off galcore.contiguousSize=50331648\0" \ -- 2.31.1

2 1

[PATCH] apalis/colibri_imx6: move setting bootcmd to defconfig
by Oleksandr Suvorov 16 Sep '21

16 Sep '21

Move setting the default boot command to the apalis/colibri_imx6_defconfig. It allows replacing the command without code modification. Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov(a)foundries.io> --- configs/apalis_imx6_defconfig | 1 + configs/colibri_imx6_defconfig | 1 + include/configs/apalis_imx6.h | 4 ---- include/configs/colibri_imx6.h | 4 ---- 4 files changed, 2 insertions(+), 8 deletions(-) diff --git a/configs/apalis_imx6_defconfig b/configs/apalis_imx6_defconfig index a0e85ba23a4..a2e0f8e3936 100644 --- a/configs/apalis_imx6_defconfig +++ b/configs/apalis_imx6_defconfig @@ -23,6 +23,7 @@ CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg" CONFIG_BOOTDELAY=1 +CONFIG_BOOTCOMMAND="run distro_bootcmd;usb start;setenv stdout serial,vidconsole;setenv stdin serial,usbkbd" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_BOARD_EARLY_INIT_F=y diff --git a/configs/colibri_imx6_defconfig b/configs/colibri_imx6_defconfig index 47b1cfb1917..bee4e7edd63 100644 --- a/configs/colibri_imx6_defconfig +++ b/configs/colibri_imx6_defconfig @@ -22,6 +22,7 @@ CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg" CONFIG_BOOTDELAY=1 +CONFIG_BOOTCOMMAND="run distro_bootcmd;usb start;setenv stdout serial,vidconsole;setenv stdin serial,usbkbd" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_BOARD_EARLY_INIT_F=y diff --git a/include/configs/apalis_imx6.h b/include/configs/apalis_imx6.h index 12de0105c6c..ade479cb943 100644 --- a/include/configs/apalis_imx6.h +++ b/include/configs/apalis_imx6.h @@ -133,10 +133,6 @@ #endif #define CONFIG_EXTRA_ENV_SETTINGS \ BOOTENV \ - "bootcmd=run distro_bootcmd ; " \ - "usb start ; " \ - "setenv stdout serial,vidconsole; " \ - "setenv stdin serial,usbkbd\0" \ "boot_file=zImage\0" \ "console=ttymxc0\0" \ "defargs=enable_wait_mode=off vmalloc=400M\0" \ diff --git a/include/configs/colibri_imx6.h b/include/configs/colibri_imx6.h index 804a144a03e..f91d6b49ea8 100644 --- a/include/configs/colibri_imx6.h +++ b/include/configs/colibri_imx6.h @@ -115,10 +115,6 @@ #define FDT_FILE "imx6dl-colibri-eval-v3.dtb" #define CONFIG_EXTRA_ENV_SETTINGS \ BOOTENV \ - "bootcmd=run distro_bootcmd; " \ - "usb start ; " \ - "setenv stdout serial,vidconsole; " \ - "setenv stdin serial,usbkbd\0" \ "boot_file=zImage\0" \ "console=ttymxc0\0" \ "defargs=enable_wait_mode=off galcore.contiguousSize=50331648\0" \ -- 2.31.1

5 4

[PATCH v3 0/2] Add support of an FXL6408 GPIO expander
by Oleksandr Suvorov 16 Sep '21

16 Sep '21

Add support of a Fairchild's FXL6408 i2c gpio expander and enable this driver for Toradex Colibri iMX8QXP SoM. Changes in v3: - fix a warning: "drivers/gpio/gpio-fxl6408.c:348:15: warning: format ‘%ld’ expects argument of type ‘long int’, but argument 3 has type ‘int’ [-Wformat=]" - add Tested-by record. Changes in v2: - Kconfig: add better description for the config option. - gpio-fxl6408.c: -- improve registers' naming. -- fix code style (comments, etc.). -- reimplement fxl6408_read() reducing number of parameters. -- change return value of fxl6408_is_output() to bool. -- replace IS_ERR_VALUE() macros with simple x < 0 where it's possible. -- fxl6408_set_direction(): fix type of parameter "dir". -- fix return error codes to avoid using the predefined in the driver model ones. -- removed extra debug code. -- expand TODO list. Oleksandr Suvorov (2): GPIO: fxl6408: Add support for FXL6408 GPIO expander colibri-imx8x: add on-module gpio expander fxl6408 arch/arm/dts/fsl-imx8qxp-colibri.dts | 27 ++ configs/colibri-imx8x_defconfig | 1 + drivers/gpio/Kconfig | 7 + drivers/gpio/Makefile | 1 + drivers/gpio/gpio-fxl6408.c | 366 +++++++++++++++++++++++++++ 5 files changed, 402 insertions(+) create mode 100644 drivers/gpio/gpio-fxl6408.c -- 2.31.1

5 8

[PATCH 0/3] Enhance Measured Boot
by Masahisa Kojima 16 Sep '21

16 Sep '21

This patch series add the following measurement mandated in the TCG PC Client PFP Specification. - SMBIOS tables - GPT disk partition topology - AuditMode and Deployed mode Masahisa Kojima (3): efi_loader: add SMBIOS table measurement efi_loader: add UEFI GPT measurement efi_loader: add DeployedMode and AuditMode variable measurement include/blk.h | 3 + include/efi_loader.h | 4 +- include/efi_tcg2.h | 27 +++ include/smbios.h | 13 ++ lib/efi_loader/Kconfig | 1 + lib/efi_loader/efi_boottime.c | 4 +- lib/efi_loader/efi_smbios.c | 2 - lib/efi_loader/efi_tcg2.c | 306 +++++++++++++++++++++++++++++++++- lib/smbios-parser.c | 127 +++++++++++++- 9 files changed, 481 insertions(+), 6 deletions(-) -- 2.17.1

3 9

[PATCH 1/1] fs/squashfs: avoid superfluous messages
by Heinrich Schuchardt 16 Sep '21

16 Sep '21

Output like the following is quite irritating: => bootefi hello Scanning disk mmc2.blk... No valid Btrfs found Bad magic number for SquashFS image. ** Unrecognized filesystem type ** Scanning disk mmc1.blk... No valid Btrfs found Bad magic number for SquashFS image. ** Unrecognized filesystem type ** Scanning disk mmc0.blk... No valid Btrfs found Bad magic number for SquashFS image. ** Unrecognized filesystem type ** It is expected that most partitions don't contain a SquashFS. This is only worth a debug message. When adding log.h put the other includes into the correct order according to our code style guide. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt(a)canonical.com> --- fs/squashfs/sqfs.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/fs/squashfs/sqfs.c b/fs/squashfs/sqfs.c index 92ab8ac631..3923e7c996 100644 --- a/fs/squashfs/sqfs.c +++ b/fs/squashfs/sqfs.c @@ -10,14 +10,15 @@ #include <asm/unaligned.h> #include <errno.h> #include <fs.h> -#include <linux/types.h> -#include <linux/byteorder/little_endian.h> -#include <linux/byteorder/generic.h> +#include <log.h> #include <memalign.h> #include <stdlib.h> #include <string.h> #include <squashfs.h> #include <part.h> +#include <linux/types.h> +#include <linux/byteorder/little_endian.h> +#include <linux/byteorder/generic.h> #include "sqfs_decompressor.h" #include "sqfs_filesystem.h" @@ -1090,7 +1091,7 @@ int sqfs_probe(struct blk_desc *fs_dev_desc, struct disk_partition *fs_partition /* Make sure it has a valid SquashFS magic number*/ if (get_unaligned_le32(&sblk->s_magic) != SQFS_MAGIC_NUMBER) { - printf("Bad magic number for SquashFS image.\n"); + log_debug("Bad magic number for SquashFS image.\n"); ret = -EINVAL; goto error; } -- 2.32.0

1 0

[GIT PULL] rpi: updates for v2021.10
by Matthias Brugger 15 Sep '21

15 Sep '21

Hi Tom, I know, quite a bit late but here come the updates for RPi for v2021.10. Actually most of the patches are fixes. Ivan's patch fixes a kernel warning when booting RPi2, as the firmware already provides a frambebuffer node. Marek's patch fixes random crashes on 32 bit RPi4 with newer firmware. My SMBIOS patchesfixes an issue that show up with e4f8e543f1 ("smbios: Drop the unused Kconfig options"). Basically the SMBIOS table broke and wasn't readable anymore. I think we can argue if the last one is a real fix. In case you just want to take the first two so late in the cycle, let me know and I can provide you with a separate pull request. Regards, Matthias --- The following changes since commit bb92678ced0b1594b93ab2f10b2c17750c789c96: Prepare v2021.10-rc4 (2021-09-14 18:58:10 -0400) are available in the Git repository at: https://source.denx.de/u-boot/custodians/u-boot-raspberrypi.git/ rpi-next for you to fetch changes up to acc6987e59137485dbac0ee4a07cc349210954f3: rpi: Conditionally add simple-framebuffer node (2021-09-15 13:34:06 +0200) ---------------------------------------------------------------- Ivan T. Ivanov (1): rpi: Conditionally add simple-framebuffer node Marek Szyprowski (1): ARM: bcm283x: change the virtual address of the XHCI PCI device base Matthias Brugger (2): arm: dts: bcm283x: Add minimal smbios information configs: rpi: Enable SMBIOS sysinfo driver arch/arm/dts/bcm283x-u-boot.dtsi | 19 +++++++++++++++++++ arch/arm/mach-bcm283x/init.c | 4 ++-- board/raspberrypi/rpi/rpi.c | 11 +++++------ configs/rpi_0_w_defconfig | 2 ++ configs/rpi_2_defconfig | 2 ++ configs/rpi_3_32b_defconfig | 2 ++ configs/rpi_3_b_plus_defconfig | 2 ++ configs/rpi_3_defconfig | 2 ++ configs/rpi_4_32b_defconfig | 2 ++ configs/rpi_4_defconfig | 2 ++ configs/rpi_arm64_defconfig | 2 ++ configs/rpi_defconfig | 2 ++ 12 files changed, 44 insertions(+), 8 deletions(-)

4 4