December 2021 - U-Boot

[PATCH] net: zynq: Add support for GEM reset
by Michal Simek 06 Dec '21

06 Dec '21

Perform reset before core initialization. Signed-off-by: Michal Simek <michal.simek(a)xilinx.com> --- drivers/net/zynq_gem.c | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) diff --git a/drivers/net/zynq_gem.c b/drivers/net/zynq_gem.c index 91957757727d..5cbe8d28304b 100644 --- a/drivers/net/zynq_gem.c +++ b/drivers/net/zynq_gem.c @@ -21,6 +21,7 @@ #include <asm/cache.h> #include <asm/io.h> #include <phy.h> +#include <reset.h> #include <miiphy.h> #include <wait_bit.h> #include <watchdog.h> @@ -217,6 +218,7 @@ struct zynq_gem_priv { bool int_pcs; bool dma_64bit; u32 clk_en_info; + struct reset_ctl_bulk resets; }; static int phy_setup_op(struct zynq_gem_priv *priv, u32 phy_addr, u32 regnum, @@ -688,12 +690,36 @@ static int zynq_gem_miiphy_write(struct mii_dev *bus, int addr, int devad, return phywrite(priv, addr, reg, value); } +static int zynq_gem_reset_init(struct udevice *dev) +{ + struct zynq_gem_priv *priv = dev_get_priv(dev); + int ret; + + ret = reset_get_bulk(dev, &priv->resets); + if (ret == -ENOTSUPP || ret == -ENOENT) + return 0; + else if (ret) + return ret; + + ret = reset_deassert_bulk(&priv->resets); + if (ret) { + reset_release_bulk(&priv->resets); + return ret; + } + + return 0; +} + static int zynq_gem_probe(struct udevice *dev) { void *bd_space; struct zynq_gem_priv *priv = dev_get_priv(dev); int ret; + ret = zynq_gem_reset_init(dev); + if (ret) + return ret; + /* Align rxbuffers to ARCH_DMA_MINALIGN */ priv->rxbuffers = memalign(ARCH_DMA_MINALIGN, RX_BUF * PKTSIZE_ALIGN); if (!priv->rxbuffers) -- 2.33.1

2 4

[PATCH] net: zynq: Add support for mdio bus address decoding
by Michal Simek 06 Dec '21

06 Dec '21

There are flying two configurations around. The first (already supported) has phy as subnode of gem node. The second has mdio subnode (with mdio name) which has phy subnode. This patch adds support for the second case where mdio subnode is found driver will look at its parent to find out which gem is handling MDIO bus. Signed-off-by: Michal Simek <michal.simek(a)xilinx.com> --- drivers/net/zynq_gem.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/zynq_gem.c b/drivers/net/zynq_gem.c index 033021f1cbfc..91957757727d 100644 --- a/drivers/net/zynq_gem.c +++ b/drivers/net/zynq_gem.c @@ -804,6 +804,9 @@ static int zynq_gem_of_to_plat(struct udevice *dev) SPEED_1000); parent = ofnode_get_parent(phandle_args.node); + if (ofnode_name_eq(parent, "mdio")) + parent = ofnode_get_parent(parent); + addr = ofnode_get_addr(parent); if (addr != FDT_ADDR_T_NONE) { debug("MDIO bus not found %s\n", dev->name); -- 2.33.1

2 4

Please pull u-boot-dm (take 2)
by Simon Glass 06 Dec '21

06 Dec '21

Hi Tom, I left out another pending patch but completely forgot to drop the timer patch last time. Here it is again. (next branch) The following changes since commit f89615088fba1b1f33713ad26dbe3a3c82b692ec: Merge branch 'next' of https://source.denx.de/u-boot/custodians/u-boot-net into next (2021-12-02 07:16:04 -0500) are available in the Git repository at: git://git.denx.de/u-boot-dm.git tags/dm-pull-5dec21a for you to fetch changes up to c229cd2b6e443a1365ff5089c4c4a6440f218dce: ide: Drop ATA_PORT_ADDR (2021-12-05 09:26:26 -0700) ---------------------------------------------------------------- binman refactoring to improve section handling bloblist - allow it to be allocated sandbox config-header cleanup ---------------------------------------------------------------- Alexander Preißner (1): drivers: core: lists: fix for loop index type Heinrich Schuchardt (1): sandbox: replace putchar(ch) by fputc(ch, stdout) Simon Glass (32): dtoc: Bring in the libfdt module automatically dtoc: Add support for reading 64-bit ints dtoc: Add support for reading fixed-length bytes properties binman: Tidy up style in cmdline binman: Add a way to obtain the version binman: Correct init of entry in Entry class binman: Correct comments for ReadChildData() binman: Drop the underscore in _ReadEntries() binman: Drop the filename property in entry_Section binman: Allow overriding BuildSectionData() binman: Allow control of which entries to read binman: Update the section documentation binman: Move cbfs.ObtainContents() down a bit binman: Use normal entries in cbfs binman: cbfs: Refactor the init process binman: cfbs: Refactor ObtainContents() for consistency binman: Rename testCbfsNoCOntents() bloblist: Support allocating the bloblist binman: Allow providing tools and blob directories binman: Allow listing an image created by a newer version binman: Allow extracting a file in an alternative format dtoc: Add support for reading string-list properties binman: Support lists of external blobs binman: Rename _ReadSubnodes() to ReadEntries() trace: sandbox: Use only the Kconfig options sandbox: Drop CONFIG_HOST_MAX_DEVICES Convert CONFIG_SYS_FDT_LOAD_ADDR to Kconfig Convert CONFIG_KEYBOARD to Kconfig keyboard: Add a migration message sandbox: Drop CONFIG_SYS_TIMER_RATE ide: Drop unused CONFIG options ide: Drop ATA_PORT_ADDR Makefile | 3 + README | 11 --- arch/Kconfig | 1 + arch/arm/mach-exynos/Kconfig | 1 + arch/arm/mach-kirkwood/include/mach/config.h | 2 - arch/powerpc/include/asm/config.h | 3 - arch/sandbox/Kconfig | 10 +++ arch/sandbox/cpu/os.c | 2 +- cmd/Kconfig | 2 + cmd/host.c | 2 +- common/Kconfig | 15 +++- common/bloblist.c | 16 +++- common/board_f.c | 8 +- configs/chromebit_mickey_defconfig | 1 + configs/chromebook_jerry_defconfig | 1 + configs/chromebook_minnie_defconfig | 1 + configs/chromebook_speedy_defconfig | 1 + configs/novena_defconfig | 1 + configs/smdk5250_defconfig | 1 + configs/smdk5420_defconfig | 1 + configs/tools-only_defconfig | 7 +- doc/develop/bloblist.rst | 16 ++++ doc/develop/driver-model/migration.rst | 8 ++ doc/develop/trace.rst | 9 +- drivers/block/ide.c | 14 +-- drivers/block/sandbox.c | 6 +- drivers/core/lists.c | 2 +- drivers/input/Kconfig | 9 ++ include/configs/edminiv2.h | 2 - include/configs/exynos5-dt-common.h | 3 - include/configs/novena.h | 1 - include/configs/r2dplus.h | 1 - include/configs/sandbox.h | 20 ----- include/configs/smdk5250.h | 1 - include/configs/smdk5420.h | 2 - include/configs/veyron.h | 2 - include/sandboxblockdev.h | 3 + scripts/config_whitelist.txt | 5 -- tools/binman/binman.rst | 65 +++++++++++++- tools/binman/cmdline.py | 76 ++++++++++++---- tools/binman/control.py | 28 +++++- tools/binman/entries.rst | 172 ++++++++++++++++++++++++++++++------ tools/binman/entry.py | 109 ++++++++++++++++++----- tools/binman/entry_test.py | 9 ++ tools/binman/etype/blob.py | 16 +++- tools/binman/etype/blob_ext_list.py | 58 ++++++++++++ tools/binman/etype/blob_phase.py | 2 +- tools/binman/etype/cbfs.py | 98 +++++++++++---------- tools/binman/etype/fdtmap.py | 12 +++ tools/binman/etype/files.py | 2 +- tools/binman/etype/fit.py | 4 +- tools/binman/etype/intel_ifwi.py | 4 +- tools/binman/etype/mkimage.py | 4 +- tools/binman/etype/section.py | 214 ++++++++++++++++++++++++++++++++++----------- tools/binman/ftest.py | 78 ++++++++++++++++- tools/binman/image.py | 12 ++- tools/binman/state.py | 18 ++++ tools/binman/test/213_fdtmap_alt_format.dts | 15 ++++ tools/binman/test/214_no_alt_format.dts | 13 +++ tools/binman/test/215_blob_ext_list.dts | 14 +++ tools/binman/test/216_blob_ext_list_missing.dts | 14 +++ tools/dtoc/fdt_util.py | 76 ++++++++++++++++ tools/dtoc/test/dtoc_test_simple.dts | 1 + tools/dtoc/test_dtoc.py | 2 + tools/dtoc/test_fdt.py | 53 ++++++++++- 65 files changed, 1090 insertions(+), 273 deletions(-) create mode 100644 tools/binman/etype/blob_ext_list.py create mode 100644 tools/binman/test/213_fdtmap_alt_format.dts create mode 100644 tools/binman/test/214_no_alt_format.dts create mode 100644 tools/binman/test/215_blob_ext_list.dts create mode 100644 tools/binman/test/216_blob_ext_list_missing.dts Regards, Simon

2 1

[PATCH] MAINTAINERS: Remove Anastasiia Lukianenko from Xen entry
by Oleksandr Andrushchenko 06 Dec '21

06 Dec '21

From: Oleksandr Andrushchenko <oleksandr_andrushchenko(a)epam.com> Anastasiia Lukianenko's e-mail is now bouncing, so remove it from the maintainers list. Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko(a)epam.com> --- Cc: Anastasiia Lukianenko <vicooodin(a)gmail.com> --- Anastasiia if instead of just removing your e-mail you still want to maintain Xen support in U-boot please please provide a new e-mail, so I can update. --- MAINTAINERS | 1 - 1 file changed, 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 9045e509d737..4d80a6c282c5 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1288,7 +1288,6 @@ F: arch/x86/ F: cmd/x86/ XEN -M: Anastasiia Lukianenko <anastasiia_lukianenko(a)epam.com> M: Oleksandr Andrushchenko <oleksandr_andrushchenko(a)epam.com> S: Maintained F: arch/arm/cpu/armv8/xen/ -- 2.25.1

3 3

[PATCH v2 1/2] binman: Do not pollute source tree when build with `make O=...`
by Andy Shevchenko 06 Dec '21

06 Dec '21

Importing libraries in Python caches the bytecode by default. Since we run scripts in source tree it ignores the current directory settings, which is $(srctree), and creates cache just in the middle of the source tree. Move cache to the current directory. Signed-off-by: Andy Shevchenko <andriy.shevchenko(a)linux.intel.com> --- v2: reused our_path tools/binman/main.py | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/tools/binman/main.py b/tools/binman/main.py index 8c1e478d54ce..4d8b124c7468 100755 --- a/tools/binman/main.py +++ b/tools/binman/main.py @@ -16,9 +16,18 @@ import sys import traceback import unittest +# Get the absolute path to this file at run-time +our_path = os.path.dirname(sys.argv[0]) + +# +# Do not pollute source tree with cache files: +# https://stackoverflow.com/a/60024195/2511795 +# https://bugs.python.org/issue33499 +# +sys.pycache_prefix = os.path.relpath(our_path, os.environ['srctree']) + # Bring in the patman and dtoc libraries (but don't override the first path # in PYTHONPATH) -our_path = os.path.dirname(os.path.realpath(__file__)) sys.path.insert(2, os.path.join(our_path, '..')) from patman import test_util -- 2.33.0

3 7

[PATCH] board: ls1043ardb: force PCI device enumeration
by Martin Schiller 06 Dec '21

06 Dec '21

Commit eb1986804d1d ("configs: enable DM_ETH support for LS1043ARDB") resulted in the PCI bus no longer being implicitly enumerated. However, this is necessary for the fdt pcie fixups to work. Therefore, similar to commit 8b6558bd4187 ("board: ls1088ardb: transition to DM_ETH"), pci_init() is now called in the board_init() routine when CONFIG_DM_ETH is active. Signed-off-by: Martin Schiller <ms(a)dev.tdt.de> CC: Priyanka Jain <priyanka.jain(a)nxp.com> CC: Camelia Groza <camelia.groza(a)nxp.com> --- board/freescale/ls1043ardb/ls1043ardb.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/board/freescale/ls1043ardb/ls1043ardb.c b/board/freescale/ls1043ardb/ls1043ardb.c index beef26b084..1764c9336c 100644 --- a/board/freescale/ls1043ardb/ls1043ardb.c +++ b/board/freescale/ls1043ardb/ls1043ardb.c @@ -219,6 +219,10 @@ int board_init(void) ppa_init(); #endif +#if !defined(CONFIG_SYS_EARLY_PCI_INIT) && defined(CONFIG_DM_ETH) + pci_init(); +#endif + #ifdef CONFIG_U_QE u_qe_init(); #endif -- 2.20.1

3 2

[PATCH] board: ls1046ardb: force PCI device enumeration
by Martin Schiller 06 Dec '21

06 Dec '21

Commit 045ecf899252 ("configs: enable DM_ETH support for LS1046ARDB") resulted in the PCI bus no longer being implicitly enumerated. However, this is necessary for the fdt pcie fixups to work. Therefore, similar to commit 8b6558bd4187 ("board: ls1088ardb: transition to DM_ETH"), pci_init() is now called in the board_init() routine when CONFIG_DM_ETH is active. Signed-off-by: Martin Schiller <ms(a)dev.tdt.de> CC: Priyanka Jain <priyanka.jain(a)nxp.com> --- board/freescale/ls1046ardb/ls1046ardb.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/board/freescale/ls1046ardb/ls1046ardb.c b/board/freescale/ls1046ardb/ls1046ardb.c index 93ef903f29..d0abfe8869 100644 --- a/board/freescale/ls1046ardb/ls1046ardb.c +++ b/board/freescale/ls1046ardb/ls1046ardb.c @@ -93,6 +93,10 @@ int board_init(void) ppa_init(); #endif +#if !defined(CONFIG_SYS_EARLY_PCI_INIT) && defined(CONFIG_DM_ETH) + pci_init(); +#endif + /* invert AQR105 IRQ pins polarity */ out_be32(&scfg->intpcr, AQR105_IRQ_MASK); -- 2.20.1

3 3

[PATCH 0/5] Series short description
by Masami Hiramatsu 06 Dec '21

06 Dec '21

Hi, This series is improving DFU subsystem. This improves dfu_alt_info parser and fixing documents etc. When I was debuging my patch for updating dfu_alt_info on the DeveloperBox platform, I found that dfu_alt_info parser doesn't accept redundant spaces and tabs. Also the dfu.rst description seems wrong. Moreover, there is no way to check whether the parser parses the dfu_alt_info correctly. These patches fixes such issues. [1/5] is just for avoiding buffer overrun, [2/5] and [3/5] improves dfu_alt_info parser to accept redundant spaces and tabs, and check the number of arguments strictly so that the parser (and user) can notice any unexpected parameters. [4/5] fixes the documents (there seems some wrong description maybe coming from copy&paste). [5/5] allows user to run 'dfu list' even if the platform doesn't support DFU_OVER_USB. Thank you, --- Masami Hiramatsu (5): DFU: Do not copy the entity name over the buffer size DFU: Accept redundant spaces and tabs in dfu_alt_info DFU: Check the number of arguments and argument string strictly doc: usage: DFU: Fix dfu_alt_info document cmd/dfu: Enable 'dfu list' command without DFU_OVER_USB cmd/dfu.c | 6 +++-- doc/usage/dfu.rst | 57 ++++++++++++++++++++++++++++++++++-------------- drivers/dfu/dfu.c | 37 ++++++++++++++++++++++++------- drivers/dfu/dfu_mmc.c | 55 +++++++++++++++++++++++++++------------------- drivers/dfu/dfu_mtd.c | 34 +++++++++++++++++++---------- drivers/dfu/dfu_nand.c | 34 ++++++++++++++++++----------- drivers/dfu/dfu_ram.c | 24 ++++++++++---------- drivers/dfu/dfu_sf.c | 34 ++++++++++++++++++----------- drivers/dfu/dfu_virt.c | 5 +++- include/dfu.h | 33 ++++++++++++++++++---------- 10 files changed, 205 insertions(+), 114 deletions(-) -- Masami Hiramatsu <masami.hiramatsu(a)linaro.org>

1 1

[PATCH v6 00/15] Add CAAM driver model support
by Gaurav Jain 06 Dec '21

06 Dec '21

This patchset adds the support for following: 1) CAAM Driver model for all i.MX, layerscape, PPC platforms. 2) Added crypto node in device tree files. 3) fix build issue for mx6sabre: Remove SPL DTB related configs and SPL_OF_CONTROL. 4) improve hwrng performance in kernel. i.MX platforms: i.MX6, i.MX7, i.MX7ULP, i.MX8MM/MN/MP/MQ, i.MX8QM/QXP Layerscape platforms: LS1021, LS1012, LS1028, LS1043, LS1046, LS1088, LS2088, LX2160, LX2162 Powerpc platforms: P3041, P4080, P5040, P2041, T1024, T1042, T2080, T4240 changes since v5: - rebase to latest master - updated BIT() macro for JRDID in drivers/crypto/fsl/jr.h - removed auto select FSL_BLOB from CMD_BLOB config. - removed patch for blob key encryption key(bkek), random number generation. - updated patch description for improving hwrng performance in kernel. - removed sec_init() from kontron/sl28. - for LS1028A architecture, enable CAAM only for LS1028AQDS and LS1028ARDB. changes since v4: - rebase to latest master - updated caam_jr_probe() with livetree APIs. - imx8m: moved jr0 disable code to *-uboot.dtsi files. changes since v3: - rebase to latest master - fixed build error when new file arch/powerpc/include/asm/u-boot-ppc.h is included from assembly files. - removed arch/arm/dts/fsl-ls1028a.dtsi as it is conflicting with the series https://lore.kernel.org/u-boot/20211013161427.612033-1-michael@walle.cc/ Gaurav Jain (13): crypto/fsl: Add support for CAAM Job ring driver model i.MX8M: crypto: updated device tree for supporting DM in SPL crypto/fsl: i.MX8M: Enable Job ring driver model in SPL and U-Boot. i.MX6: Enable Job ring driver model in U-Boot. i.MX7: Enable Job ring driver model in U-Boot. i.MX7ULP: Enable Job ring driver model in U-Boot. i.MX8: Add crypto node in device tree crypto/fsl: i.MX8: Enable Job ring driver model in SPL and U-Boot. Layerscape: Add crypto node in device tree Layerscape: Enable Job ring driver model in U-Boot. PPC: Add crypto node in device tree PPC: Enable Job ring driver model in U-Boot update CAAM MAINTAINER Ye Li (2): mx6sabre: Remove unnecessary SPL configs crypto/fsl: Improve hwrng performance in kernel MAINTAINERS | 6 + arch/arm/Kconfig | 15 +- arch/arm/cpu/armv7/ls102xa/Kconfig | 4 + arch/arm/cpu/armv7/ls102xa/cpu.c | 16 + arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 24 + arch/arm/cpu/armv8/fsl-layerscape/cpu.c | 10 +- arch/arm/dts/fsl-imx8dx.dtsi | 61 ++- arch/arm/dts/fsl-imx8qm-mek-u-boot.dtsi | 34 +- arch/arm/dts/fsl-imx8qm.dtsi | 61 ++- arch/arm/dts/fsl-imx8qxp-mek-u-boot.dtsi | 34 +- arch/arm/dts/fsl-ls1012a.dtsi | 46 +- arch/arm/dts/fsl-ls1043a.dtsi | 45 +- arch/arm/dts/fsl-ls1046a.dtsi | 44 ++ arch/arm/dts/fsl-ls1088a.dtsi | 39 ++ arch/arm/dts/fsl-ls2080a.dtsi | 39 ++ arch/arm/dts/fsl-lx2160a.dtsi | 41 +- arch/arm/dts/imx7ulp.dtsi | 24 + arch/arm/dts/imx8mm-evk-u-boot.dtsi | 19 +- arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi | 19 +- arch/arm/dts/imx8mp-evk-u-boot.dtsi | 19 +- arch/arm/dts/imx8mq-evk-u-boot.dtsi | 4 + arch/arm/dts/ls1021a.dtsi | 40 ++ arch/arm/include/asm/arch-imx8/imx-regs.h | 5 +- arch/arm/include/asm/arch-imx8m/imx-regs.h | 1 + arch/arm/mach-imx/cmd_dek.c | 1 + arch/arm/mach-imx/imx8/Kconfig | 9 + arch/arm/mach-imx/imx8/cpu.c | 16 +- arch/arm/mach-imx/imx8m/Kconfig | 23 + arch/arm/mach-imx/imx8m/soc.c | 10 +- arch/arm/mach-imx/mx6/Kconfig | 20 + arch/arm/mach-imx/mx6/soc.c | 12 +- arch/arm/mach-imx/mx7/Kconfig | 3 + arch/arm/mach-imx/mx7/soc.c | 11 +- arch/arm/mach-imx/mx7ulp/Kconfig | 4 + arch/arm/mach-imx/mx7ulp/soc.c | 16 + arch/powerpc/cpu/mpc85xx/Kconfig | 44 ++ arch/powerpc/cpu/mpc85xx/cpu_init.c | 17 +- arch/powerpc/dts/p2041si-post.dtsi | 1 + arch/powerpc/dts/p3041si-post.dtsi | 1 + arch/powerpc/dts/p4080si-post.dtsi | 1 + arch/powerpc/dts/p5040si-post.dtsi | 1 + arch/powerpc/dts/qoriq-sec4.0-0.dtsi | 74 +++ arch/powerpc/dts/qoriq-sec4.2-0.dtsi | 83 ++++ arch/powerpc/dts/qoriq-sec5.2-0.dtsi | 92 ++++ arch/powerpc/dts/t1023si-post.dtsi | 1 + arch/powerpc/dts/t1042si-post.dtsi | 1 + arch/powerpc/dts/t2080si-post.dtsi | 1 + arch/powerpc/dts/t4240si-post.dtsi | 1 + arch/powerpc/include/asm/u-boot-ppc.h | 17 + arch/powerpc/include/asm/u-boot.h | 1 + board/freescale/imx8mm_evk/spl.c | 9 +- board/freescale/imx8mn_evk/spl.c | 8 +- board/freescale/imx8mp_evk/spl.c | 13 +- board/freescale/imx8mq_evk/spl.c | 9 +- board/freescale/imx8qm_mek/spl.c | 6 +- board/freescale/imx8qxp_mek/spl.c | 6 +- board/freescale/ls1012afrdm/ls1012afrdm.c | 7 +- board/freescale/ls1012aqds/ls1012aqds.c | 6 +- board/freescale/ls1012ardb/ls1012ardb.c | 6 +- board/freescale/ls1021aiot/ls1021aiot.c | 6 +- board/freescale/ls1021aqds/ls1021aqds.c | 6 +- board/freescale/ls1021atsn/ls1021atsn.c | 7 +- board/freescale/ls1021atwr/ls1021atwr.c | 8 +- board/freescale/ls1028a/ls1028a.c | 6 +- board/freescale/ls1043ardb/ls1043ardb.c | 6 +- board/freescale/ls1046afrwy/ls1046afrwy.c | 7 +- board/freescale/ls1046aqds/ls1046aqds.c | 7 +- board/freescale/ls1046ardb/ls1046ardb.c | 6 +- board/freescale/ls1088a/ls1088a.c | 6 +- board/freescale/ls2080aqds/ls2080aqds.c | 6 +- board/freescale/ls2080ardb/ls2080ardb.c | 9 +- board/freescale/lx2160a/lx2160a.c | 5 - board/kontron/sl28/sl28.c | 3 - configs/P2041RDB_defconfig | 1 - configs/P3041DS_defconfig | 1 - configs/P4080DS_defconfig | 1 - configs/P5040DS_defconfig | 1 - configs/T1024RDB_defconfig | 1 - configs/T1042D4RDB_defconfig | 1 - configs/T2080QDS_defconfig | 1 - configs/T2080RDB_defconfig | 1 - configs/T2080RDB_revD_defconfig | 1 - configs/T4240RDB_defconfig | 1 - configs/ls1021aiot_qspi_defconfig | 1 - configs/ls1021aqds_nor_defconfig | 1 - configs/ls1021aqds_qspi_defconfig | 1 - configs/ls1021atsn_qspi_defconfig | 1 - configs/ls1021atwr_nor_defconfig | 1 - ...s1021atwr_sdcard_ifc_SECURE_BOOT_defconfig | 1 + configs/ls1028ardb_tfa_defconfig | 1 - configs/ls1043ardb_tfa_defconfig | 1 - configs/ls1046afrwy_tfa_defconfig | 1 - configs/ls1046aqds_tfa_defconfig | 1 - configs/ls1046ardb_tfa_defconfig | 1 - configs/ls2088aqds_tfa_defconfig | 1 - configs/ls2088ardb_tfa_defconfig | 1 - configs/lx2160aqds_tfa_defconfig | 1 - configs/lx2160ardb_tfa_defconfig | 1 - configs/lx2162aqds_tfa_defconfig | 1 - configs/mx6sabreauto_defconfig | 2 - configs/mx6sabresd_defconfig | 4 - drivers/crypto/fsl/Kconfig | 9 +- drivers/crypto/fsl/Makefile | 2 + drivers/crypto/fsl/jobdesc.c | 4 +- drivers/crypto/fsl/jr.c | 452 +++++++++++++----- drivers/crypto/fsl/jr.h | 14 + include/fsl_sec.h | 13 +- scripts/config_whitelist.txt | 1 + 108 files changed, 1502 insertions(+), 294 deletions(-) create mode 100644 arch/powerpc/dts/qoriq-sec4.0-0.dtsi create mode 100644 arch/powerpc/dts/qoriq-sec4.2-0.dtsi create mode 100644 arch/powerpc/dts/qoriq-sec5.2-0.dtsi create mode 100644 arch/powerpc/include/asm/u-boot-ppc.h -- 2.17.1

2 19

[PATCH v4 00/16] Add CAAM driver model support
by Gaurav Jain 06 Dec '21

06 Dec '21

This patchset adds the support for following: 1) CAAM Driver model for all i.MX, layerscape, PPC platforms. 2) Added crypto node in device tree files. 3) CAAM support for blob key encryption key(bkek), random number generation. 4) fix build issue for mx6sabre: Remove SPL DTB related configs and SPL_OF_CONTROL. 5) fixed hwrng performance issue in kernel. i.MX platforms: i.MX6, i.MX7, i.MX7ULP, i.MX8MM/MN/MP/MQ, i.MX8QM/QXP Layerscape platforms: LS1021, LS1012, LS1028, LS1043, LS1046, LS1088, LS2088, LX2160, LX2162 Powerpc platforms: P3041, P4080, P5040, P2041, T1024, T1042, T2080, T4240 changes since v3: - rebase to latest master - fixed build error when new file arch/powerpc/include/asm/u-boot-ppc.h is included from assembly files. - removed arch/arm/dts/fsl-ls1028a.dtsi as it is conflicting with the series https://lore.kernel.org/u-boot/20211013161427.612033-1-michael@walle.cc/ Gaurav Jain (14): crypto/fsl: Add support for CAAM Job ring driver model crypto/fsl: Add CAAM support for bkek, random number generation i.MX8M: crypto: updated device tree for supporting DM in SPL crypto/fsl: i.MX8M: Enable Job ring driver model in SPL and U-Boot. i.MX6: Enable Job ring driver model in U-Boot. i.MX7: Enable Job ring driver model in U-Boot. i.MX7ULP: Enable Job ring driver model in U-Boot. i.MX8: Add crypto node in device tree crypto/fsl: i.MX8: Enable Job ring driver model in SPL and U-Boot. Layerscape: Add crypto node in device tree Layerscape: Enable Job ring driver model in U-Boot. PPC: Add crypto node in device tree PPC: Enable Job ring driver model in U-Boot update CAAM MAINTAINER Ye Li (2): mx6sabre: Remove unnecessary SPL configs crypto/fsl: Fix kick_trng MAINTAINERS | 7 + arch/arm/Kconfig | 9 +- arch/arm/cpu/armv7/ls102xa/Kconfig | 4 + arch/arm/cpu/armv7/ls102xa/cpu.c | 16 + arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 27 + arch/arm/cpu/armv8/fsl-layerscape/cpu.c | 10 +- arch/arm/dts/fsl-imx8dx.dtsi | 61 ++- arch/arm/dts/fsl-imx8qm-mek-u-boot.dtsi | 34 +- arch/arm/dts/fsl-imx8qm.dtsi | 61 ++- arch/arm/dts/fsl-imx8qxp-mek-u-boot.dtsi | 34 +- arch/arm/dts/fsl-ls1012a.dtsi | 46 +- arch/arm/dts/fsl-ls1043a.dtsi | 45 +- arch/arm/dts/fsl-ls1046a.dtsi | 44 ++ arch/arm/dts/fsl-ls1088a.dtsi | 39 ++ arch/arm/dts/fsl-ls2080a.dtsi | 39 ++ arch/arm/dts/fsl-lx2160a.dtsi | 41 +- arch/arm/dts/imx7ulp.dtsi | 24 + arch/arm/dts/imx8mm-evk-u-boot.dtsi | 18 +- arch/arm/dts/imx8mm.dtsi | 1 + arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi | 18 +- arch/arm/dts/imx8mn.dtsi | 1 + arch/arm/dts/imx8mp-evk-u-boot.dtsi | 18 +- arch/arm/dts/imx8mp.dtsi | 1 + arch/arm/dts/imx8mq.dtsi | 1 + arch/arm/dts/ls1021a.dtsi | 40 ++ arch/arm/include/asm/arch-imx8/imx-regs.h | 5 +- arch/arm/include/asm/arch-imx8m/imx-regs.h | 1 + arch/arm/mach-imx/cmd_dek.c | 1 + arch/arm/mach-imx/imx8/Kconfig | 9 + arch/arm/mach-imx/imx8/cpu.c | 16 +- arch/arm/mach-imx/imx8m/Kconfig | 23 + arch/arm/mach-imx/imx8m/soc.c | 10 +- arch/arm/mach-imx/mx6/Kconfig | 20 + arch/arm/mach-imx/mx6/soc.c | 12 +- arch/arm/mach-imx/mx7/Kconfig | 3 + arch/arm/mach-imx/mx7/soc.c | 11 +- arch/arm/mach-imx/mx7ulp/Kconfig | 4 + arch/arm/mach-imx/mx7ulp/soc.c | 16 + arch/powerpc/cpu/mpc85xx/Kconfig | 44 ++ arch/powerpc/cpu/mpc85xx/cpu_init.c | 17 +- arch/powerpc/dts/p2041si-post.dtsi | 1 + arch/powerpc/dts/p3041si-post.dtsi | 1 + arch/powerpc/dts/p4080si-post.dtsi | 1 + arch/powerpc/dts/p5040si-post.dtsi | 1 + arch/powerpc/dts/qoriq-sec4.0-0.dtsi | 74 +++ arch/powerpc/dts/qoriq-sec4.2-0.dtsi | 83 ++++ arch/powerpc/dts/qoriq-sec5.2-0.dtsi | 92 ++++ arch/powerpc/dts/t1023si-post.dtsi | 1 + arch/powerpc/dts/t1042si-post.dtsi | 1 + arch/powerpc/dts/t2080si-post.dtsi | 1 + arch/powerpc/dts/t4240si-post.dtsi | 1 + arch/powerpc/include/asm/u-boot-ppc.h | 17 + arch/powerpc/include/asm/u-boot.h | 1 + board/freescale/imx8mm_evk/spl.c | 9 +- board/freescale/imx8mn_evk/spl.c | 8 +- board/freescale/imx8mp_evk/spl.c | 13 +- board/freescale/imx8mq_evk/spl.c | 9 +- board/freescale/imx8qm_mek/spl.c | 6 +- board/freescale/imx8qxp_mek/spl.c | 6 +- board/freescale/ls1012afrdm/ls1012afrdm.c | 7 +- board/freescale/ls1012aqds/ls1012aqds.c | 6 +- board/freescale/ls1012ardb/ls1012ardb.c | 6 +- board/freescale/ls1021aiot/ls1021aiot.c | 6 +- board/freescale/ls1021aqds/ls1021aqds.c | 6 +- board/freescale/ls1021atsn/ls1021atsn.c | 7 +- board/freescale/ls1021atwr/ls1021atwr.c | 8 +- board/freescale/ls1028a/ls1028a.c | 6 +- board/freescale/ls1043ardb/ls1043ardb.c | 6 +- board/freescale/ls1046afrwy/ls1046afrwy.c | 7 +- board/freescale/ls1046aqds/ls1046aqds.c | 7 +- board/freescale/ls1046ardb/ls1046ardb.c | 6 +- board/freescale/ls1088a/ls1088a.c | 6 +- board/freescale/ls2080aqds/ls2080aqds.c | 6 +- board/freescale/ls2080ardb/ls2080ardb.c | 9 +- board/freescale/lx2160a/lx2160a.c | 5 - cmd/Kconfig | 1 + configs/P2041RDB_defconfig | 1 - configs/P3041DS_defconfig | 1 - configs/P4080DS_defconfig | 1 - configs/P5040DS_defconfig | 1 - configs/T1024RDB_defconfig | 1 - configs/T1042D4RDB_defconfig | 1 - configs/T2080QDS_defconfig | 1 - configs/T2080RDB_defconfig | 1 - configs/T4240RDB_defconfig | 1 - configs/ls1021aiot_qspi_defconfig | 1 - configs/ls1021aqds_nor_defconfig | 1 - configs/ls1021aqds_qspi_defconfig | 1 - configs/ls1021atsn_qspi_defconfig | 1 - configs/ls1021atwr_nor_defconfig | 1 - ...s1021atwr_sdcard_ifc_SECURE_BOOT_defconfig | 1 + configs/ls1028ardb_tfa_defconfig | 1 - configs/ls1043ardb_tfa_defconfig | 1 - configs/ls1046afrwy_tfa_defconfig | 1 - configs/ls1046aqds_tfa_defconfig | 1 - configs/ls1046ardb_tfa_defconfig | 1 - configs/ls2088aqds_tfa_defconfig | 1 - configs/ls2088ardb_tfa_defconfig | 1 - configs/lx2160aqds_tfa_defconfig | 1 - configs/lx2160ardb_tfa_defconfig | 1 - configs/lx2162aqds_tfa_defconfig | 1 - configs/mx6sabreauto_defconfig | 2 - configs/mx6sabresd_defconfig | 4 - drivers/crypto/fsl/Kconfig | 9 +- drivers/crypto/fsl/Makefile | 4 +- drivers/crypto/fsl/desc.h | 5 + drivers/crypto/fsl/fsl_blob.c | 82 ++++ drivers/crypto/fsl/jobdesc.c | 20 +- drivers/crypto/fsl/jobdesc.h | 4 + drivers/crypto/fsl/jr.c | 461 +++++++++++++----- drivers/crypto/fsl/jr.h | 14 + include/fsl_sec.h | 13 +- scripts/config_whitelist.txt | 1 + 113 files changed, 1614 insertions(+), 292 deletions(-) create mode 100644 arch/powerpc/dts/qoriq-sec4.0-0.dtsi create mode 100644 arch/powerpc/dts/qoriq-sec4.2-0.dtsi create mode 100644 arch/powerpc/dts/qoriq-sec5.2-0.dtsi create mode 100644 arch/powerpc/include/asm/u-boot-ppc.h -- 2.17.1

5 32